Mobility Disabilities

Results: 5971

'lawry' Rotary Attachment For Paraplegics

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Rotating transfer device to allow paraplegics to use the toilet then swing away from the toilet on the same seat to use the shower hose. Device made of a U shaped seat held horizontally with the help of an S shaped cantelever system fastened to the floor and using ball and taper bearings to let it rotate. This is used in conjunction with an overhead support which allows paraplegics or lower extremity amputees with upper body strength to toilet and show

"u" Adjustable Width Tray Slide Bracket Attaching System (Model 32798)

The "U" Adjustable Width Tray Slide Bracket Attaching System, model 32798, is lapboard mounting hardware designed to secure trays to wheelchairs. These brackets enable a tray (not included) to slide on to the armrests from the front and the configuration of the bracket enables it to be attached to the underside the of the tray and wrap around standard wheelchair armrest pads and attached to the underside of the armrest (mounting hardware is not included). These brackets can be mounted inside or

"z" Tray Slide Bracket Attaching System (Model 32799)

The "Z" Tray Slide Bracket Attaching System, model 32799, is lapboard mounting hardware designed to secure trays to wheelchairs. These brackets enable a tray (not included) to slide on to the armrests from the front. and the configuration of the bracket enables it to be attached to the underside of standard wheelchair armrest pads and the underside of the tray (mounting hardware is not included). A hook-and-loop strap attaching system (not included) may be used in conjunction with these brackets

1000 Series

Manual drive wheelchair, folding. Adult sizes, seat widths, 16 or 18 inches. Seat depth, 16 inches. Back height, 16 inches. Arms: fixed or detachable, full length or desk length, fixed height. Arm lock, spring button release. Front rigging, swingaway footrests, swingaway elevating legrests and swingaway, elevating extended length legrests. Chrome plated carbon steel frame and crossbrace. Push handles with vinyl handgrip. Flame retardant vinyl upholstery with reinforced liner. Wheels: 24-inch com

1000E Series

Manual drive wheelchair, folding. Adult sizes, seat widths, 16 or 18 inches. Seat depth, 16 inches. Back height, 16 inches. Two frame types: FF fixed arm, fixed footrest; SA swingaway with permanent arms (08), full length removable arms (18) or desk length removable arms (28). Chrome-plated carbon steel frame and crossbrace. Push handles with vinyl handgrip. Flame retardant vinyl upholstery with reinforced lining. Twenty-four inch spoked wheels, solid rubber tires. Eight inch plastic mag style w

1100 Handrail

The 1100 Handrail is a handrail designed for use by individuals with balance, lower extremity, walking or mobility disabilities. The handrail angles toward the wall for greater wall protection. It is mounted on a 0.080-inch thick, continuous aluminum retainer, and it is covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl cover. The grip is 1.5 inches in diameter and it extends 3.75 inches from the wall. All mounting fasteners are included with the handrail. DIMENSIONS (LxH):

120 Angle Grab Bar For Wall

Stainless steel straight grab bar, with extension support. 1, 1 1/4 or 1 1/2 inch diameter, 1 1/2 inch wall clearance. Satin finish. Exposed or concealed mount. 12 inches long, with 12 inch perpendicular extension.

1200 Handrail

The 1200 Handrail is a handrail designed for use by individuals with balance, lower extremity, or mobility disabilities. The handrail provides a gripping surface with ergonomically designed handrail thumb groove. It is mounted on a 0.080-inch thick, continuous aluminum retainer; and is covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl cover. The grip is 1.5 inches in diameter and it extends 3 inches from the wall. All mounting fasteners are included with the product. DIMEN

1200 Handrail

The 1200 Handrail is a handrail designed for use by individuals with balance, lower extremity, or mobility disabilities. The handrail provides a gripping surface with an ergonomically designed thumb groove. It is mounted on a 0.08-inch thick, continuous aluminum retainer; and is covered with a 0.08-inch thick, scratch- and stain-resistant rigid vinyl cover. The grip is 1.5 inches in diameter, and it extends 3 inches from the wall. All mounting fasteners are included with the product. DIMENSIONS

1255 Handrail

The 1255 Handrail is a handrail designed for use by individuals with balance, lower extremity, or mobility disabilities. The handrail provides a gripping surface with ergonomically designed handrail thumb groove. It features a 2.5-inch high accent strip available in a selection of colors, patterns, finish options and custom colors. The 1255 is mounted on a 0.08-inch thick, continuous aluminum retainer; and is covered with a 0.08-inch thick, scratch and stain resistant rigid vinyl cover. The grip

13 Inch Balance Dome

This 13 inch is designed for persons with poor motor skills and balance challenges, so those persons may improve on gross motor and balance skills. Has a smooth flat bottom surface and nubby top, made for gripping.

13-Inch Sling Bag

The 13-inch Sling Bag, model 70040, is an underseat pocket designed to provide easy access and an unobstructed view of any items stored in this carrying bag to manual wheelchair users. The caddy is large enough to hold many daily needed items such as medicines, personals, writing instruments, paper, etc. The bag comes standard with a main compartment, pen and pencil pouch, and a small front pouch. The bag features a spring-action, hex frame opening which can be opened by placing the fingers in t

130Bn Bluenose Surface Mount Corner Guard

The 130BN BlueNose Surface Mount Corner Guard is designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. This product features vinyl retainer which is nearly four times stronger than aluminum retainer, preventing chipped plaster or paint or torn wallpaper resulting from bumping by wheelchairs, scooters, walkers, crutches, or canes. The 130BN is lightweight and comes with top and bottom caps. The angle measures 135 degrees. DIMENSIONS: The wing is 3 inc

14-Inch & 16-Inch Walker Bags (Models 70100 & 70120)

The 14-inch and 16-inch Walker Bags, models 70100 and 70120, are carrying bags for attachment to the side or front of a walker. These lined bags are made of coated nylon Cordura and have quick release clips. The opening is made of a spring hex frame which requires very little manual dexterity or strength to operate. Opening the bag is achieved by placing the fingers in the middle of the frame and popping it outward; by pushing on the outside of the frame, the bag snaps shut. DIMENSIONS (HxWxD):

150 Surface Mount Corner Guard

The 150 Surface Mount Corner Guard is designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. This product features a continuous aluminum retainer that has pre-slotted holes. The guard can also be used to conceal previous dings and scrapes. Top and bottom caps are included with every unit and can be color coordinated. The angle measures 90 degrees. DIMENSIONS: The wing is 3 inches wide on each side. The rigid vinyl cover is 0.080 inch thick, and the co

160F Flush Mount Corner Guard

The 160F Flush Mount Corner Guard is designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. This product offers minimum design interruption by creating a smooth transition from wall to corner. The 160F is mounted on a sturdy 0.070-inch pre-punched continuous aluminum retainer. Mounting fasteners and closure caps are included with the product. DIMENSIONS: The wing is 2 inches wide on each side with a 90-degree corner angle. The scratch and stain resist

17 Series Wheelchair Accessible Mobile Lab Station

The 17 Series Wheelchair Accessible Mobile Lab Station is a portable, accessible science work station designed for use by individuals with lower extremity and mobility disabilities or spinal cord injury and others who use wheelchairs. This workstation is designed for use in classrooms and science laboratories to allow students who use a wheelchair access to scientific experiments in a classroom setting. Made with a steel frame and heavy duty solid plastic panels, this unit resembles a standard d

170Fr G2 Bioblend Fire Rated Corner Guard

The 170FR G2 BioBlend Fire Rated Corner Guard is designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. This product meets fire codes with the choice of one- or two-hour fire rating, and offers minimum design interruption by creating a smooth transition from wall to corner. The 0.080-inch non-PVC cover is manufactured with G2 blend Bio-PolyPETG+, which is made with a corn-based biopolymer and recycled content. The 170FR has an easy-wrap cover base aro

2 Wheelchairs Accessible 4-Seater Picnic Table

This product is designed for persons in wheelchairs. It is a 4-seater picnic table. Has room for 2 wheelchairs to also be seated at the table. It is made from high-pressure wood from sustainable sources – FSC Certified. Item will arrive “flatpacked” to save transport costs.

2-Way Lift Chair (Model 70556)

The 2-Way Lift Chair, model 70556, is a seat lift chair and recliner designed for use by individuals with mobility disabilities. This two-position chair features quiet and smooth lift and recline. With a touch of a button the chair lifts the user up. A built-in emergency battery back-up allows the chair to return to the sitting position in the event of a power outage. POWER: Uses household current; the backup uses 9-volt batteries (not included). DIMENSIONS (HxW): The chair is 43 x 29 inches. Th

2000 Handrail

The 2000 Handrail is a handrail designed for use by individuals with balance, lower extremity, or mobility disabilities. The handrail is mounted on a 0.080-inch thick, continuous aluminum retainer, and it is covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl cover. The grip is 2.25 inches in diameter. All mounting fasteners are included with the product. The removable bottom access plate allows the handrail to be fastened to the wall. DIMENSIONS (LxD): 12 feet x 1.25 inches

2000W Handrail

The 2000W Handrail is a handrail designed for use by individuals with balance, lower extremity, or mobility disabilities. The handrail is mounted on a 0.080-inch thick, continuous aluminum retainer; and is covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl cover. The 2000W is manufactured with Woodland pattern full wrap, and includes all mounting fasteners and black reveals for returns and corners. The removable bottom access plate allows the handrail to be fastened to the

24/7 Medical Alert

The 24/7 Medical Alert is an emergency alert system with monitoring service designed for use by seniors or individuals with balance or mobility disabilities or who are at risk for medical emergencies. The system includes a bedside console that calls a professionally monitored central station when activated by a wireless pendant transmitter. The small, waterproof transmitter can be worn in the shower, and covers a radius of 150 to 200 feet, depending on the construction of the home. The console c

3 Inch Swivel Rubber Swivel Wheel Casters With Glide Brakes.

Casters for the front legs of standard Guardian walkers. 3 inches diameter, thermoplastic rubber tires won't mar floors. Standard rear glide brakes are provided for stopping.

3-Hole Offset Board (Model 31652)

The 3-Hole Offset Board, Model 31652, is a transfer board designed for use by people who use wheelchairs. Made of 7-ply Finnish birch plywood with a lacquer finish, the board features 3 hand holes set at an angle to assist the in gripping as the user moves across the board. DIMENSIONS (LxW): 24 x 11.5 inches. WARRANTY: The manufacturer warrants this product against defects in materials and workmanship for 90 days from the date of purchase.

3-Inch Single Fixed Wheel Attachments With Rear Glide Tips (Model 6270) & 5-Inch Single Fixed Wheel Attachments With Rear Glide Tips (Model 6271)

The 3-inch Single Fixed Wheel Attachments with Rear Glide Tips, model 6270, and the The 5-inch Single Fixed Wheel Attachments with Rear Glide Tips, model 6271, are wheeled leg attachments for walkers designed to convert standard walkers to wheeled walkers. Both models fit Invacare walkers and have easy-to-clean polypropylene wheel rims and non-marring thermoplastic rubber tires. The wheels and bearings are corrosion protected. WARRANTY: Limited lifetime warranty.

3-Inch Swivel Wheels With 13-Inch Rear Leg Extensions With Glide Tips (Model 6269), 3-Inch Swivel Wheels With 13-Inch Cambered Sure Glide Brakes (Model 6272) & 3-Inch Swivel Wheels Attachments With Rear Glide Tips (Model 6273)

The 3-inch Swivel Wheels with 13-inch Cambered Sure Glide Brakes, model 6272, are wheeled leg attachments for walkers designed to convert standard walkers to wheeled walkers. This set includes front swivel wheel attachments and rear leg attachments with cambered brakes. The 3-inch Swivel Wheels Attachments with Rear Leg Extensions with Glide Tips, model 6269, has the front swivel wheels attachments, rear leg extensions, and glide tips to replace the standard tips on the rear walker legs. The 3-i

3-Inch Wheeled Footpiece (Models 7729 & 7731)

Three inch nonswivelling wheels to replace front legs of Guardian Safe T Fold walker. Model 7731 for adult and youth sizes. Model 7729 for child and toddler sizes.

3-Wheel Walker

The 3-Wheel Walker is a folding wheeled walker designed for use by individuals with mobility disabilities. This walker features a lightweight, folding steel frame; hand brake system; padded handgrips; and three swivel wheels. A basket and a carrying pouch are also included. DIMENSIONS (HxDxW): 38.5 x 30.5 x 23 inches. The wheels are eight inches in diameter. CAPACITY: 250 pounds.

3000/3055 Handrail

The 3000/3055 Handrail is a handrail designed for use by individuals with balance, lower extremity, mobility or walking disabilities. The handrail's gripping surface has an ergonomically designed thumb groove and delivers impact protection with a 0.070-inch continuous impact bumper. It is mounted on a 0.080-inch thick, continuous aluminum retainer, and it is covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl cover. The handrail has a 1.5-inch diameter grip, and it extends 3

3000W/3055W Handrail

The 3000W/3055W Handrail is a handrail designed for use by individuals with balance, lower extremity, mobility or walking disabilities. The handrail's gripping surface has an ergonomically designed thumb grip and delivers impact protection with internal vinyl bumper. It is mounted on a 0.080-inch thick, continuous aluminum retainer; and is covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl cover. The handrail has a 1.5-inch diameter grip with a wood grain surface, and it ex

32-Foot Wheelchair Accessible Restroom Trailer

The 32-Foot Wheelchair Accessible Restroom Trailer is a portable accessible restroom designed for use by individuals with mobility disabilities or spinal cord injury. This unit provides a wheelchair accessible restroom on a trailer equipped with air conditioning and heating, hardwood floors, oak paneling, and brass fixtures. The wheelchair accessible section has one accessible private toilet stall. The trailer also includes non-wheelchair accessible sections for men and women. The ladies' restro

3500Vw Silhouette Woodland Faux Wood Handrail

The 3500VW Silhouette Woodland Faux Wood Handrail is a handrail designed for use by individuals with balance, lower extremity, mobility or walking disabilities. The handrail provides a hand grasp for all users and protects interior walls from damage using a 0.070-inch continuous impact bumper with a faux wood finish below the handrail. The handrail and bumper are mounted on a 0.080-inch continuous aluminum retainer and are covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl

3G Arrow Rear Wheel Drive Power Wheelchair With Truetrack

The 3G Arrow Rear Wheel Drive Power Wheelchair with TrueTrack is a powered wheelchair designed for use by individuals with mobility, neurological, or lower extremity disabilities or spinal cord injury. TrueTrack technology translates the driver's commands to help keep the power chair on a true forward path and minimize the need for veer correction on slopes, thresholds, and uneven terrain. FRAME (LxW): 28.5 (short base) or 31.5 (long base) x 12 to 24 inches. The frame is available in silver, bla

3M Safety Bath Mat

The 3M Safety Bath Mat is a bathtub mat designed for use by individuals with balance or mobility disabilities. Made from pressure-sensitive 3M Safety-Walk vinyl material, the mat is comfortable to the skin and can be cleaned in the same way as a tub. DIMENSIONS (LxW): 12 x 24 or 12 x 30 inches. COLOR: Clear or white.

3M Sill Mat

The 3M Sill Mat is a bathtub mat designed for use by individuals with balance or mobility disabilities. Made from pressure-sensitive 3M Safety-Walk vinyl material, the mat is used on the sill of the tub for added safety. DIMENSIONS (LxW): 6 x 24 or 12 x 30 inches. COLOR: Clear or white.

3Rd Hand Small Electronics Mount

The 3rd Hand Small Electronics Mount is an extension arm for wheelchair accessories designed for use by individuals with mobility or neurological disabilities or spinal cord injury. The standard mount comes with a three-segment support arm, a ball base for attachment to the wheelchair or other surface, and a head plate surface for holding small electronics such as a cell phone, iPod, camera, PDA, miniPC, or adaptive switches. The head plate has an AMPS-NEC compatible head plate hole pattern. Ite

4 D Lapboard Adjustable Bracket Mount (08-3000 Series)

Lapboard adjusts vertically, laterally, front and rear. Adjustable tilt. 1/2 inch clear acrylic. Sizes: 24 by 15 inches (08-3111), 22 by 13 inches (08-3211), 20 by 11 inches (08-3311). Also available in 1/4 inch clear acrylic ($300.00). Modifications and accessories: 3/8 inch acrylic, colored acrylic, 1/4 inch ABS plastic, 1/4 inch lexan, cutouts, special widths and depths, aluminum rim, plastic rim, communication overlay.

4 Mini Button

The 4 Mini Button is pneumatic switch pad designed for use by individuals who use wheelchairs. This unit accommodates four switches (switches not included)to control power wheelchair chair seat functions and drive controls.

4 Station Franklin Voting Booth

The 4 Station Franklin Voting Booth is a wheelchair accessible voting booth designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This booth has four stations for voters and provides privacy for voters with and without disabilities. One station meets the ADAAG (Americans with Disabilities Act Accessibility Guidelines) requirements for approach, leg clearance, and height. This station has a lower writing shelf for use by wheelchair users or individua

4-In-1 Trike

The 4-In-1 Trike is a child's tricycle designed for use by young children with lower extremity, mobility, neurological, or balance disabilities. Designed for children 9 months to 5 years old, this 4-in-1 tricycle converts from a stroller to a steering trike, to a learning to ride trike, and to a classic trike. Features of this steel-framed trike include a removable wrap-around tray with cup holder, a removable 3-point harness, a removable headrest, and a removable adult height-adjustable push ha

4-Inch Tile Grip Portable Grab Bar

The 4-Inch Tile Grip Portable Grab Bar is a wall grab bar designed for use by individuals with balance and mobility disabilities. This grab bar features a telescoping handle that extends to adapt to most tile configurations and secures with large suction cups to most clean, smooth, flat surfaces without tools. When the unit is in place, pressing the top and bottom levers down locks the unit in place. Lifting the levers up releases the bar from the wall, allowing it to be removed as needed. DIMEN

4000 Series

Manual drive wheelchair, folding. Adult sizes, seat widths, 16, 18, 20 or 22 inches. Seat depth, 16 inches. Back height, 16 inches. Arms: fixed or detachable, fixed or adjustable height, full length or desk length. Screw attached stainless steel clothing guards. Arm lock, button spring release. Front rigging: swingaway footrests and elevating legrests; and telescopic legrests. Chrome plated carbon steel frames and crossbraces. Push handles with vinyl handgrips. Upholstery: embossed Naugahyde wit

5-Inch Swivel Wheels With 13-Inch Cambered Sure Glide Brakes (Model 6268) & 5-Inch Swivel Wheels Attachments With Rear Glide Tips (Model 6267)

The 5-inch Swivel Wheels with 13-inch Cambered Sure Glide Brakes, model 6268, are wheeled leg attachments for walkers designed to convert standard walkers to wheeled walkers. This set includes front swivel wheel attachments and rear leg attachments with cambered brakes. The 5-inch Swivel Wheels Attachments with Rear Glide Tips, model 6267, has the front swivel wheels attachments and glide tips to replace the standard tips on the rear walker legs. Both models fit Invacare walkers and have easy-to

5500 Series Canes And Quad Canes

Canes feature black sponge grips and black safety lock silencer rings. Available in several styles: low profile quad cane has narrow or wide black K design base; straight, crook handled cane or offset cane adjust in height from 31 inches to 39 inches and have black reinforced tips. Available in silver or bronze.

6-Seater Picnic Table- Fits 2 Wheelchairs

This product is designed for people who use wheelchairs. It is a 6-seater picnic table and has room for 2 wheelchairs to also be seated at the table. It is made from high-pressure wood from sustainable sources – FSC Certified. Item will arrive “flatpacked” to save transport costs.

6650 Half Mask

The 6650 Half Mask is a headrest accessory designed to provide head support for forward thrusting individuals. The mask follows the contours of the forehead and cheeks to help hold the head comfortably within a headrest. A replaceable terrycloth pad lines the foam mask, and an aluminum inner core allows the headpiece to be formed to fit the face. For mounting purposes, one side of of the mask can be attached directly to headrest; the opposite side fastens with snap buckles. OPTIONS: 6650 Mount P

6917 Non-Stomp-Down-Able Heel Loops

The 6917 Non-Stomp-Down-Able Heel Loops are flexible polyethylene strap designed to provide an alternative to webbed heel straps on wheelchair footrests. An ankle strap is included for maintaining foot placement, as well as attachment screws. SIZES: Universally sized; one size fits all. COLOR: Black.

6922 Grip Covers

The 6922 Grip Covers are handgrip cushions for crutches, cane handles, and walkers. These spongy pads are made of 1/4-inch thick ventilated foam. DIMENSIONS: 6 inches long; fits handle diameters up to 1 inch. COLOR: Black.

6924 Forearm Crutch Covers

The 6924 Forearm Crutch Covers are foam covers for forearm crutch cuffs. These vinyl coated covers slip on over the cuffs. SIZES: Small, to fit child size cuffs, and Large, to fit adult size cuffs. DIMENSIONS: 0.25 inch thick. COLOR: casa tan or black.

6Runner 10 (Model 888Wnlm)

The 6Runner 10, model 888WNLM, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 42 x 23 x 46.4 inches. The ground clearance is 3 inches. The turning radius is 15.75 inches. The base is available in red. CONTROLS: VR2 Controller and VR2 Main Control Box. MWD: Mid-wheel drive with 0.6 horsepower. SEAT (WxDxH): 18 x 17.5 x 22 inche

6Runner 10 Deluxe (Model 858Wm)

The 6Runner 10 Deluxe, model 858WM, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 30 x 22 x 38.6 inches. The ground clearance is 3 inches. The turning radius is 18 inches. The base is available in red or blue. CONTROLS: Integral VSI Joystick Controller and VSI Controller Bracket. MWD: Mid-wheel drive with 0.8 horsepower. SEAT

6Runner 10 Rehab (Model 888Wnlm-R)

The 6Runner 10 Rehab, model 888WNLM-R, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxW): The overall dimensions, including the footplate, are 42 x 23 x 35.5 inches. The wheelbase is 33 x 23 inches with a ground clearance of 3 inches. The turning radius is 15.75 inches. The base is available in blue. CONTROLS: Integral VSI Joystick Controller. MWD: Mid-wheel drive with 0.8 horsepower.

6Runner 14 (Model 888Wnllhd)

The 6Runner 14, model 888WNLLHD, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 42 x 26 x 49 inches. The ground clearance is 2.75 inches. The turning radius is 23.5 inches. The base is available in red. CONTROLS: Programmable VR2 Joystick Controller with adjustable speed and battery life indicator. MWD: Mid-wheel drive with 1

7-Miles

---- PROTOTYPE --------- PURPOSE: To design a prototype of a robotic orthosis to assist individuals with mobility disabilities with gait. 7-miles is an exosketal orthosis for the leg. This innovative system of robotic leg braces supports the body and assists the user's natural walking motion with compact and powerful linear electric motors that assist the hips and knees. The device supports a person from their gluteal area down to the ankle. It does not restrict the range of motion and is very

7000 Series D.C. Metro Bus

The D.C. Metro Bus 7000 Series is an American with Disabilities Act compliant metro bus that is designed for all people, for those in wheelchairs and those with mobility disabilities to ride to and from places with comfort and stability. It's ergonomic design allows for 2 more inches in the aisles on both sides, has a separate section for those in wheelchairs. Replaced the 1000 and 4000 Series metro buses. Seats 40 more people. Speaker is in real time and automated so it's clearer to understand

7500 Flat Panel Radial Arm (Models 7500-500, 7500-800, 7500-1000, & 7500-1500)

The 7500 Flat Panel Radial Arm is a monitor arm designed to hold a flat panel computer monitor for individuals with mobility disabilities or low vision. This unit suspends a flat panel (not included) above the desk surface and allows the user to position it. Cables are routed inside the arm. The unit holds a monitor weighing 2 to 13 pounds (model 7500-500), 6 to 21 pounds (model 7500-800), 8 to 27 pounds (model 7500-1000), or 13.5 to 44 pounds (model 7500-1500). The unit has a vertical range of

7901 Hensinger Covers

The 7901 Hensinger Covers are replacement covers for the 6810 Hensinger Head Support and the 6809 Hensinger Head Support with High Back (see separate entries). They are made of a cotton blend. SIZES: Extra small, small, medium or large. COLOR: Black or blue.

7902 Hensinger Strap

The 7902 Hensinger Strap is a replacement straps with either a snap buckle or an adjustable slide buckle designed for the 6810 Hensinger Head Support and the 6809 High Back Hensinger Head Support (see separate entries). The straps are attached to the back plate. An optional velcro closure is available. SIZES: Extra small, small, medium or large. COLOR: Black.

7903 Hensinger Quick Release Mount Plate

The 7903 Hensinger Quick Release Mount Plate is a headrest accessory for the Hensinger Head Supports (see separate entries). The plate has 2 straps that attach the unit to the back of a seating unit. The Hensinger Head Support attaches to the plate with velcro. The velcro release will allow the head to move forward with the body. For permanent mounting, 2 screws are used to insure that the front and back plate stay connected. DIMENSIONS: 12 x 4 inches. COLOR: Black.

7914 Half Mask Otto Bock Mount Plate

The 7914 Half Mask Otto Bock Mount Plate is a headrest accessory designed to mount the 6650 Half Mask (see separate entry) onto the Otto Bock headrest. The mask mounts with adhesive foam backing for breakaway release in the event of emergency impacts. COLOR: Black.

7Flex Lcd Arm (Model 7Flex-104I )

The 7Flex LCD Arm, model 7Flex-104i, is a monitor arm designed to position a flat panel computer monitor for individuals with physical disabilities or low vision. This arm suspends a flat panel display above the user's desk. The suspended monitor can be repositioned with just one hand. The unit has a vertical range of 16 inches (8 inches up and down from horizontal). It rotates 360 degrees at three joints, and can tilt the monitor over 200 degrees. The unit comes with FLEXmount mounting hardware

8-Inch Beverage Bag (Model 70020)

The 8-inch Beverage Bag, model 70020, is a caddy for attachment to wheelchairs designed to accommodate liquid containers, school or art supplies, and other items. The lined bag will holds 1 or 2 cans of soda or other drinks, sports bottles, and coffee mugs. Made of coated nylon, the caddy affixes to the wheelchair tubing with a 3-inch piece of adhesive Velcro strapping (included). The bag features a spring-action hex frame opening which can be opened by simply placing the fingers in the middle o

8-Inch Crutch Bag (Model 70200)

The 8-inch Crutch Bag, model 70200, is a carrying bag for standard axillary crutches. The bag hangs off the crutch handle using 4-inch loops that may be unsnapped from the bag. This lined caddy is made of coated nylon and features a spring-action hex frame opening which is operated by simply placing the fingers in the middle of the frame and popping it open or pushing on the outside to close. Opening and closing of the frame does not require manual dexterity or strength. DIMENSIONS (HxWxD): 5.25

800 Handrail

The 800 Handrail is a handrail designed for use by individuals with balance, lower extremity, walking or mobility disabilities. The handrail provides protection for a wall and support for users. It is mounted on a 0.080-inch thick, continuous aluminum retainer, and it is covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl cover. The grip is 1.5 inches thick, and it extends 3 inches from the wall. All mounting fasteners are included with the product. DIMENSIONS (LxH): 12 feet

800 Series 120 Degree Angle Wall Grab Bar For Toilet (Model 004)

The 800 Series 120 Degree Angle Wall Grab Bar for Toilet ##004 is a stainless steel wall mounted grab bar. This bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. DIMENSIONS: Both segments of the bar are 12 inches each; mountings are 21 inches apart. Tubing comes in 1, 1.25, or 1.5 inch diameters. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip with Polished Finish. WEIGHT: 3 pounds.

800 Series 90 Degree Angle Wall Grab Bar For Toilet (Models 005 & 006)

The 800 Series 90-Degree Angle Wall Grab Bar for Toilet ##005/006 is a stainless steel wall mounted grab bar. This grab bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. The bar comes in right (##006) or left (##005) handed configurations. DIMENSIONS: Bar extends vertically 32 inches and horizontally 16 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip with Polish

800 Series 97 Degree Angle Wall Grab Bar For Toilet (Models 040 & 041)

The 800 Series 97 Degree Angle Wall Grab Bar for Toilet ##040/041 is a stainless steel wall mounted grab bar. This bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. Available with right (##041) or left (##040) handed configurations. DIMENSIONS: Bar extends 32 inches vertically, and 9 inches horizontally with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip with Polished Fini

800 Series Corner Wall Grab Bar For Toilet (Model 059)

The 800 Series Corner Wall Grab Bar for Toilet ##059 is a stainless steel wall mounted safety bar. The bar consists of two perpendicular sections that extend from the walls 6 inches. This corner bar attaches in three places, two on the side wall and one on the back wall. This grab bar is available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. DIMENSIONS: 36 x 52 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard Satin, Sanitary Safety G

800 Series Corner Wall Grab Bar For Toilet (Models 119 & 120)

The 800 Series Corner Wall Grab Bar for Toilet ##119/120 is a stainless steel grab bar configured for end or corner stalls. The grab bar consists of a U-shaped bar that goes on the open side of the toilet, and a perpendicular bar that mounts on the wall side of the toilet 5 inches from the opposing wall. These grab bars are avaialble with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. Configurations for right (##120) or left (##119) handed mounting. DIMENSIO

800 Series Grab Bar For Bathtub (Model 021)

The 800 Series Grab Bar for Bathtub ##021 is a stainless steel wall to floor grab bar designed for the wall end of a bathtub. The support consists of a U-shaped horizontal bar that attaches to the wall and 2 perpendicular bars that mount in the floor on either side of the tub. This bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 40 x 12 x 32 inches with 1, 1.25, or 1.5 inch diameter tubing. WEIGHT: 8 to 10 pounds. FINI

800 Series Grab Bar For Bathtub (Model 024)

The 800 Series Grab Bar for Bathtub ##024 is a stainless steel wall mounted grab bar designed for use at the wall end of a bathtub. The support consists of a U-shaped bar with support extensions at either end. The bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 40 x 12 x 6 inches with 1, 1.25, or 1.5 inch diameter tubing. WEIGHT: 6 to 7 pounds. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Gr

800 Series Grab Bar For Bathtub (Models 023 & 022)

The 800 Series Grab Bar for Bathtub ##023/022 is a stainless steel wall mounted grab bar for corner tub applications. The bar consists of an L-shaped horizontal bar that attaches to both walls, and a vertical bar that mounts in the floor. These grab bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. Available in right (##022) or left (##023) handed configurations. DIMENSIONS (LxWxH): 40 x 8.5 x 32 inches with 1, 1.25, or 1.5 inch diameter

800 Series Grab Bar For Bathtub (Models 026 & 027)

The 800 Series Grab Bar for Bathtub, ##026/027, is a stainless steel corner wall grab bar designed to be wall mounted at the corner end of the tub. The bar consists of one L-shaped bar and one support extension. These grab bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. Available in right (##026) or left (##027) handed configurations. DIMENSIONS (LxWxH): 40 x 12 x 6 inches with 1, 1.25, or 1.5 inch diameter tubing. WEIGHT: 4 to 5 pound

800 Series Grab Bar For Bathtub (Models 031 & 030)

The 800 Series Grab Bar for Bathtub ##030/031 is a stainless steel wall mounted grab bar designed for corner tub applications. The bar consists of an L-shaped horizontal bar with a perpendicular upright at one end. These bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. Available with right (##030) or left (##031) handed configurations. DIMENSIONS (LxWxH): 36 x 20 x 24 inches with 1, 1.25, or 1.5 inch diameter tubing. WEIGHT: 7 to 8 poun

800 Series Grab Bar For Shower (Model 007)

The 800 Series Grab Bar for Shower ##007 is a stainless steel wall mounted grab bar designed for shower applications. The support consists of a U-shaped bar that attaches to the wall in 4 places. This bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 25 x 1.5 x 34 inches with 1, 1.25, or 1.5 inch diameter tubing. WEIGHT: 8 to 9 pounds. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip with Pol

800 Series Grab Bar For Shower (Models 032 & 033)

The 800 Series Grab Bar for Shower ##032/033 is a stainless steel wall mounted grab bar for corner shower applications. The support consists of an L-shaped bar that attaches to the wall at two points on the vertical bar and one point on the horizontal bar. These bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. Available in right (##033) or left (##032) handed configurations. DIMENSIONS (LxWxH): 24 x 1.5 x 34 inches with 1, 1.25, or 1.5

800 Series Grab Bar For Shower (Models 034 & 035)

The 800 Series Grab Bar for Shower ##034/035 is a stainless steel wall mounted grab bar for corner shower applications. The support consists of an L-shaped horizontal bar with a perpendicular upright at one end. This bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. Available in right (##035) or left (##034) handed configurations. DIMENSIONS (LxWxH): 26 x 26 x 24 inches with 1, 1.25, or 1.5 inch diameter tubing. WEIGHT: 6 to 7 pounds. FINIS

800 Series Grab Bar For Toilet (Model 039)

The 800 Series Grab Bar for Toilet ##039 is a stainless steel floor mounted safety frame for a toilet. The frame consists of two parallel rails that form an upside down U shape and mount in the floor at 4 places. A perpendicular rail runs behind the toilet and connects the two rails. These grab bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 22 x 22 x 28 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Stan

800 Series Grab Bar For Toilet (Model 054)

The 800 Series Grab Bar for Toilet ##054 is a stainless steel wall to floor grab bar for unilateral support when accessing a toilet. The support consists of an L-shaped bar bent at 90 degrees that attaches to the wall and to the floor with a 3-inch extension at the floor mounting. This bar is available with a concealed or exposed mounting. DIMENSIONS (LxH): 33 x 30 inches with either 1.25 or 1.5 inch diameter tubing (1-inch tubing not available with this bar). WEIGHT: 6 to 7 pounds. FINISH: Stan

800 Series Grab Bar For Toilet (Models 001 & 002)

The 800 Series Grab Bar for Toilet ##001/002 is a stainless steel, wall mounted straight bar designed for horizontal attachment next to a toilet. This support attaches to the wall in two places for lengths up to 54 inches (##001), and has a center support mount for lengths over 54 inches (##002). This bar is available with concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. DIMENSIONS: Model 001 is available in the following lengths: 12, 16, 18, 24, 30, 32, 36, 42,

800 Series Grab Bar For Toilet (Models 010 & 011)

The 800 Series Grab Bar for Toilet ##010/011 is a stainless steel wall to floor grab bar for unilateral support while accessing a toilet. The support consists of an L-shaped bar bent at 90 degrees that attaches to both the wall and the floor, and an outrigger, or extension floor mount. These bars are available with a concealed or exposed mounting, right (##011) or left (##010) handed configuration, and have a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 30 x 6 x 33 inches with 1

800 Series Wall Grab Bar For Toilet (Model 003)

The 800 Series Wall Grab Bar for Toilet ##003 is a stainless steel grab bar that consists of a straight bar with a center post and one end return. This grab bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. DIMENSIONS: 48, 52, or 54 inch standard lengths with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip with Polished Finish. WEIGHT: 5 to 6 pounds.

800 Series Wall Grab Bar For Toilet (Model 012)

The 800 Series Wall Grab Bar for Toilet ##012 is a stainless steel wall to floor double bar for toilets. The grab bar consists of two parallel bars that go on either side of the toilet, like a safety frame, with one perpendicular bar situated approximately 5 inches from the wall, when mounted. These grab bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 30 x 24 x 33 inches with 1, 1.25, or 1.5 inch diameter tubing. FI

800 Series Wall Grab Bar For Toilet (Model 117)

The 800 Series Wall Grab Bar for Toilet ##117 is a stainless steel wall mounted grab bar. The frame consists of 2 U-shaped railings with a perpendicular bar between rails situated 5 inches from the wall when mounted. These grab bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 24 x 24 x 16 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip wi

800 Series Wall Grab Bar For Toilet (Models 115 & 116)

The 800 Series Wall Grab Bar for Toilet ##115/116 is a stainless steel U-shaped grab bar with extension support. These grab bars are available with a concealed or exposed mounting. All styles have a standard safety clearance of 1.5 inches, and are available in Right (##116) or Left (##115) handed configurations. DIMENSIONS: 16 x 24 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard, Sanitary Safety Grip, Bright Polished, or Safety Grip with Polished Finish. WEIGHT: 6 pounds.

800W Woodland Faux Wood Handrail

The 800W Woodland Faux Wood Handrail is a handrail designed for use by individuals with balance, lower extremity, walking or mobility disabilities. The handrail is mounted on a 0.080-inch thick, continuous aluminum container, and it is covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl cover. The grip is 1.5 inches thick, and it extends 3 inches from the wall. The 800W is manufactured with Woodland pattern full wrap, and includes all mounting fasteners and black reveals for

802-DY Ultra Lightweight Wheelchair

The 802-DY Ultra Lightweight Wheelchair is a lightweight adult manual wheelchair designed for use by individuals with mobility or lower extremity disabilities, or spinal cord injury. FRAME (HxW): 37 x (23 or 25) inches. Folding high strength aluminum frame with black powder coat finish. Folded width is 12 inches. Anti-tippers are optional. SEAT (WxD): (16 or 18) x 16 inches. Seat to floor height is 20 inches. Seat back height is 16 inches or 17 inches (18-inch seat width). Options include foldab

855 Handrail

The 855 Handrail is a handrail designed for use by individuals with balance, lower extremity, or mobility disabilities. The handrail features a 3.19-inch high wayfinding accent strip available in a selection of colors and patterns. It is mounted on a 0.08-inch thick, continuous aluminum retainer, and it is covered with a 0.08-inch thick, scratch- and stain-resistant rigid vinyl cover. The grip is 1.5 inches in diameter, and it extends 3 inches from the wall. All mounting fasteners are included w

8725 Head Float

The 8725 Head Float is a float swimming aid designed to support the head of individuals with reflex domination. The cushioned support allows the head to rest without pressure on the spinal column, encouraging neutral positioning. This swimming aid is made of vinyl-coated flotation foam. SIZES: Small (for users weighing 20 to 30 pounds), medium (for users weighing 40 to 50 pounds), and large (for users weighing 60 to 175 pounds). DIMENSIONS (LxWxT): 16 x 12 x 1.5 inches (small), 20 x 13 x 2 inche

8727 Dolphin Float System

The 8727 Dolphin Float System is a float swimming aid designed to compensate for uneven weight distribution in swimmers with physical or neurological disabilities. This harness style foam device has two removable side pads to minimize lateral rotation. A removable front third pad provides additional lift. OPTIONS: Stabilizer Bar for increased stability; swim rings for added head and neck support; and the crotch strap to prevent the flotation harness from riding up while swimming. SIZES: Small (

9-Inch Security Pouch (Model 70000)

The 9-inch Security Pouch, model 70000, is a wheelchair side pouch designed to be attached under the armrest to prevent theft of valuables and money. The flap-style pouch is secured with heavy webbing, and made of 400 Denier coated nylon packcloth. This lined carrying bag will accommodate a calculator, writing utensils, change purses or small wallets, etc. DIMENSIONS (WxH): 10 x 6 inches. COLOR: Royal blue, magenta, teal, grey, black, and burgundy.

90 Degree Grab Bar

The 90 Degree Grab Bar is a wall mounted grab bar designed for use by individuals with balance or mobility disabilities or spinal cord injury. It features vertical and horizontal bars at right angles in either a left- or right-handed configuration. OPTIONS: Slide hook. DIMENSIONS: Vertical and horizontal bars are available in any combination of 12, 16, 24, or 32 inches. COLOR: Available finishes include polished chrome, antique brass, polished brass, polished nickel, satin chrome, satin nickel,

900 Handrail

The 900 Handrail is a handrail designed for use by individuals with balance, lower extremity, mobility or walking disabilities. The handrail is mounted on a 0.080-inch thick, continuous aluminum retainer; and is covered with a scratch and stain resistant, 0.080-inch thick vinyl cover. The 900 has a 1.5-inch diameter grip, and it extends 3 inches from the wall. All mounting fasteners are included with the product. DIMENSIONS (LxD): 12 feet x 1.5 inches. COLOR: Available in a variety of colors and

9817 Halo Helmet

The 9817 Halo Helmet is a protective helmet designed for wear by individuals who have balance disabilities, head/skull injuries, or seizures who do not need full head coverage. A band of 5/8-inch foam surrounds the head at the forehead level. It extends down to the temporal area on each side of the head and to the occipital area at the back. The top has adjustable crisscross straps to help stabilize the helmet on the head. An adjustable chin strap is included. OPTIONS: 7640 Velcro Chin Strap, 34

A Frame by Smirthwaite

The A Frame by Smirthwaite is a swing frame that has been designed to handle a large weight capacity. It is designed for use by children with sensory integration disorders, and physical and neurological disabilities. Made from tubular steel and supported by six legs, the A Frame can handle 300 kilograms (661 pounds). This allows two Smirthwaite swings or bolsters to be used at the same time. It is easy to construct and can be used with or without cushioned mats.

A*com System

The A*Com System is a modular ramp system designed to provide wheelchair access to dwellings and other structures. The system includes ramps, steps, and platforms. The system is customizable and can be reconfigured and/or relocated. The platform and steps come with a guardrail, plus an additional grasping rail for the steps. Steps come in flights of three to eight individual steps. DIMENSIONS (LxW): Platforms are 64 x 64 or 60 x 48 inches, with a 42-inch guardrail. Ramps are 60 x 48, 72 x 48, 96

A-6 & A-6S

The A-6 and A-6S are lightweight wheelchairs designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: The A-6S comes standard with a rigid suspension and the A-6 is standard without the suspension. The overall width for both models is available from 20.75 to 34.5 inches. A tapered front end or a non-tapered V front end are available at no extra charge. The frame width and depth are available in a range of sizes from 14 x 14 inches to 20 x 20 inches in one-inch inc

A-Frame Ladder

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted A-frame ladder for a child with microcephaly, developmental delay, cerebral palsy, and low muscle strength to use for strengthening exercises and promote standing and other mobility. The frame’s ladder rungs are made from 25 millimeter dowel and the four sides are made of pine and angled off at the top to avoid a sharp edge, The frame is painted a cheerful yellow. Each set of the two sides is hinged at the top and is locked

A-Frame Voter Parking Sign With Handicap Symbol (Model Sg-167)

The A-Frame Voter Parking Sign with Handicap Symbol, model SG-167, is a parking area marker for a polling place to indicate parking that is accessible to voters with disabilities at polling sites. The sign features the International Access symbol beneath the words, "Voter Parking." The picture and text are pre-printed on both sides of an A-shaped frame made of corrugated plastic. DIMENSIONS (HxW): 30 x 15 inches. COLOR: Blue print on white background.

A.b.e. End Drain Wheelchair Access Shower Pan (Model Bf-6030)

The A.B.E. End Drain Wheel Chair Access Shower Pan, model BF-6030, is a wheelchair accessible shower pan designed for use in building roll-in showers. The pan is made in a single, molded piece with a slip-resistant floor, an integral molded drain, a single threshold, and a flange on three sides. The pan is available with either a left or right drain. OPTIONS: 12 x 60 inch access ramp, model BF-1260; flexible threshhold, model BF-FT. DIMENSIONS (LxW): 30 x 60 inches. The drain is 2 inches in diam

A1A Ultimate Edition Tub

The A1A Ultimate Edition Tub is a walk in whirlpool bathtub designed for use by individuals with lower extremity or mobility disabilities or arthritis. The tub is constructed of heavy-duty reinforced fiberglass composites with a high gloss triple gel resin finish. It has a free standing stainless steel support frame with six adjustable leveling feet, two side panels, two technical front access panels, a tile flange, a non-slip seat and tub floor, and a safety grab bar. It has an integrated 42 li

A4

The A4 is a lightweight wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Lightweight frame with an overall width of 18.75 to 36.5 inches. Features include a curved back frame and a camber tube clamp assembly that allows adustment of the center-of-gravity in an infinite number of settings. A full suspension is available as an option. SEAT: Available with seat widths of 12 to 22 inches and seat depths of 14 to 22 inches. The rear seat-to-floor hei

A4 Titanium

The A4 Titanium is a lightweight wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Titanium frame with infinite center-of-gravity adjustment and a full suspension option. The overall frame width ranges from 18.75 to 36.5 inches. A tapered or V front end are available at no extra charge. The frame is available in a choice of 22 colors. Rear anti-tips are optional. SEAT: Available with seat width from 12 to 22 inches and seat depth from 14 to 22 in

Abbey Bathseat

The Abbey Bathseat is a bath seat designed for use by individuals with lower extremity, balance, neurological, or mobility disabilities. It is made from reinforced plastic with 7 millimeter slots for drainage and a semicircular indentation in the front of the seat to facilitate intimate hygiene. The seat has four suction cups to hold it securely in position in the tub. COLOR: White. DIMENSIONS (LxW): 460 x 360 millimeters (mm). The height is adjustable to 150, 200, 250 and 300 mm or 150 and 250

Abby Superglide Stair Lift

The Abby Superglide Stair Lift is an interior or exterior seat lift designed for use by individuals with lower extremity, mobility, or walking disabilities. Installed on a stairway, this unit moves the user up or down the stairs on a swivel seat. It has a smooth start-and-stop option, a handheld remote control, a joystick control, and five safety sensors to detect possible obstructions on the steps. Models include the standard lift, a space saver lift, an outdoor lift, a curved rail stair lift,

Abduction Blocks

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted abduction blocks for an individual with multiple sclerosis and hemiplegia to use to exercise. The progression of MS and after having a stroke this individual was no longer able to continue living on her own. However, she is determined to keep exercising and retain as much strength and mobility as she can. When attempting to walk after the stroke using support railings, she found that her right leg would cross in front of

Abductor Flip Down Kit (Model 31467)

The Abductor Flip Down Kit, model 31467, is seating hardware general designed to allow abductors and lateral pads to swing away during wheelchair transfers. Designed to be used with the manufacturer's Abductor Pads or Lateral Pads (see separate entries), this kit includes one four-inch coated steel tapered L-bracket, one 2.75-inch coated steel slotted L-bracket, one 2.75-inch coated steel extrender, one anodized aluminum hinge, and mounting hardware. COLOR: Black.

Abductor Pads (Models 31429, 31430, 31431, 31466S, 31466M, & 31466L)

The Abductor Pads are designed to aid in positioning people who use wheelchairs. Made of textured urethane self-skinning foam, these pads come with 10-32 T-nuts embedded in all mounting holes. Models 31429, 31430, and 31431 have one-inch on center mounting holes and the 31466 series have 1.5-inch on center mounting holes. SIZES: Both styles come in small, medium, and large. DIMENSIONS: All pads are three inches tall. The small models are 3 inches wide in the front and 3.5 inches wide in the back

Abiloader-Fo

The AbiLoader-FO is a wheelchair loader for car, pickup truck, sport utility vehicle and van designed for use by people with lower extremity or mobility disabilities, spinal cord injury and other who use wheelchairs. It is intended for use with folding wheelchairs. The device is installed in the trunk or rear storage area of a vehicle into which the folded wheelchair will fit. The AbiLoader-FO has a robotic arm with two actuators and a mechanism to grab and hold a wheelchair. There is a third ac

Abiloader-Fx

The AbiLoader-FX is a wheelchair loader for car, pickup truck, sport utility vehicle and van designed for use by people with lower extremity or mobility disabilities, spinal cord injury and other who use wheelchairs. It is intended for use with wheelchairs with fixed frames that do not fold. The device is installed in the trunk or rear storage area of a vehicle into which the folded wheelchair will fit. The AbiLoader-FX has a robotic arm with two actuators and a mechanism to grab and hold a whee

Able Generation Floor Walker

The Able Generation Floor Walker is a child walker designed for use by children with mobility disabilities who are learning to take their first step. This walker features a stable base for emerging walkers, a cut-away base for full striders, and it can also serve as a cart. This walker features locking front caster that control the direction of travel, enabling a choice of omni-directional, forward or backward motion. For those requiring standing practice or support, the casters can be removed.

Able Jr AAC

Able Jr AAC is augmentative and alternative communication (AAC) application for the iPad/iPhone and iPod Touch that is specifically designed for toddlers and preschoolers with delayed speech or severe speech disorders. Express frequently used words and phrases by scrolling through 26 categories with over 750 pictures available. Intuitive and child-friendly, Able Jr helps young children to communicate with teachers, family, caregivers, and other people they meet in everyday life. Able Jr offers p

Able Life Auto Assist Handle - Automotive Standing Aid & Adjustable Ergonomic Vehicle Support Handle

The Able Life Auto Assist Handle - Automotive Standing Aid & Adjustable Ergonomic Vehicle Support Handle is a grab bar or handle designed for automobile users with a balance or transfer disability to provide handgrip for transfer safety. Safety grip makes it easy to stand. Installs and removes in seconds. Fits any framed car window. Adjustable length. No-slip rubber grip.

Able Life Universal Stand Assist

The Able Life Universal Stand Assist is a standing aid designed for individuals with limited mobility to rise from a seated position on a couch, chair, or recliner with ease. Dual support cushion handles makes standing easy. Fits most couches, chairs, or recliners on top of or between chair cushions. It is fully adjustable in height and depth, foldable, with a trigger release.

Ablenet's Action Dictionary

AbleNet’s Action Dictionary is a reference guide to alternative solutions that support student actions when adaptations are required for communicating, moving, learning and/or generally engaging in the classroom. The solutions and recommendations found in the Action Dictionary are designed for students with cognitive and physical challenges yet other students may benefit from these adaptations as well. How It Is Organized Action words like SPEAK, LOOK, CHOOSE are key to both engaging and gaugin

Ableware 703170000 Mobility Plastic No-Wire Walker Basket by Maddak

This no-wire walker basket is meant for walker users. The basket firmly attaches to the horizontal and vertical bars of the users walker. Its flexible, virtually indestructible, retractable stabilizing arms lock onto the legs of the walker and eliminate excess swinging. The front of the basket features a slot for an identification tag and the bottom of the basket has a built-in glass, can or cup holder, a smaller compartment for coins or medications and a trough for utensils, pens, straws or eye

Ableware 703190050 Deluxe Wire Walker Basket with Stabilizing Bars

The Ableware Deluxe Wire Walker Basket with Stabilizing Bars is plastic coated. Two hooks support the basket while two easy to bend, vinyl coated aluminum stabilizing strips keep it from swinging. The strips permit attachment to nearly all walker models. It features a heavy duty white plastic insert tray that has one large compartment, a coin or medication holder and a round compartment for a glass, can or cup. 

Ableware 703200050 Walker Bag Hook by Maddak

Creates a convenient spot on a walker to hang a bag or purse. Simply attach the clamp around the walker and hang a purse or bag on the hook. Can also be used on most standard bed rails. Clamp can be adjusted to accommodate tubing diameters of 1/2 to 1 1/8" (1.27 - 2.9 cm).  

Ableware 703210000 Madda-Comfort Walker and Crutch Hand Pads

Madda-Comfort Walker and Crutch Hand Pads is designed to minimize hand discomfort and sweaty palms when using a walker or crutches. Two layers of terrycloth are combined to achieve a soft, clean, comfortable grip. The pads wrap around standard walker or crutch handles and are secured by hook-and-loop fasteners.

Ableware 703220051 Double-Sided Quilted Walker Tote Bag-Printed Burgundy

Double-Sided Quilted Walker Tote Bags  hangs over walker crossbar Quilted decorative cotton tote bags have front and back pockets that are held in place by hook-and-loop closures. Is designed for people with fine motors disabilities.   

Ableware 703300001 Cotton Tote Bag for Walkers and Wheelchairs

The cotton tote bag is intended for use by people that have a walking assistant such as walker or wheelchair, and is designed for keeping personal belongings safe and close by. Easy to use clips make it simple to attach and remove. Includes a sewn in key ring, side pocket for easy access to often used items and a carry strap that enables the user to hold the bag when it is detached.  

Ableware 704000001 Arm Escort by Maddak-Right Arm-Medium

The right arm escort in a medium size is designed for people with hemiplegia to use instead of a regular arm sling. It protects and supports the hemiplegic arm during all aspects of functional mobility. The two-piece design consists of a wrist support and a heavy duty cotton belt. The wrist support attaches to belt with hook-and-loop and detaches when not needed, making it easy to put on and take off.  

Ableware 704000004 Arm Escort by Maddak-Left Arm-Medium

The left arm escort in a medium size is designed for people with hemiplegia to use instead of a regular arm sling. It protects and supports the hemiplegic arm during all aspects of functional mobility. The two-piece design consists of a wrist support and a heavy duty cotton belt. The wrist support attaches to belt with hook-and-loop and detaches when not needed, making it easy to put on and take off.  

Ableware 704092010 Replacement Sling for Sit and Ride and Maddacrawler

The Replacement Sling for Sit and Ride and Maddacrawler is designed to assist adults and children that have fine motors disabilities.  It can be used as a stepping stone in therapy. Practice in the seated position of certain ambulatory patterns will prepare a person for actual use of the movements in a standing position. Sling is height adjustable from 9 – 17¨ (22.9 – 45.2 cm) and allows children and adults of all sizes to sit and propel themselves with their feet and to practice smooth reciproc

Ableware 704170000 35" Mobility Leg Lift by Maddak

Ableware's Leg Lift is designed for people with limited lower extremity strength. It enables them to lift the foot onto a wheelchair foot rest, bed or into a car. The user can independently move their feet with the help of the leg strip.

Ableware Ablerise Bed Rail

ABLEWARE AbleRise Bed Rails are side rails designed to provide support for individuals with mobility disabilities as they enter and exit the bed. Available in a single model and a double model, the base of these rails installs between the mattress and the box springs. The rails are height adjustable and feature storage pockets. DIMENSIONS: The rails are 20 inches wide. The space between the handles on the double model adjusts from 7 to 17 inches. The unit extends 39.25 inches under the mattress

Ableware Children's Seat

The ABLEWARE Children's Seat is a youth positioning chair designed for use with children with balance, mobility, or neurological disabilities. This molded box-style seat is reversible for different seat heights and features slots to accommodate pelvic straps (not included) for use as a booster seat/highchair alternative. DIMENSIONS: The seat is 4.5 inches high on one side and 6.5 inches high on the other. WEIGHT: Less than 4.5 pounds.

Ableware Deluxe Flexible Sock And Stocking Aid

The Ableware Deluxe Flexible Sock and Stocking Aid is designed for use by individuals with arthritis or lower extremity or mobility disabilities. This aid has a flexible plastic core with a three-finger design. The core is lined with nylon to reduce friction and covered with terry cloth on the bottom to prevent the sock from slipping. Two long loop handles aid in pulling the device. To use the sock or compression stocking is slipped over the aid with the three fingers toward the toe. The aid is

Ableware Reversible Toilet Transfer Seat (Rtts)

The Ableware Reversible Toilet Transfer Seat (RTTS) is a toilet transfer aids designed for use by individuals with mobility disabilities. The unit can be used with the armrests up to assist those who have difficulty rising from the toilet, but do not require as much assistance as provided by an elevated toilet seat or grab bars. When used with the armrests turned toward the floor, this device becomes an extra-wide extended platform to assist in wheelchair transfers. This seat bolts to most stan

Ableware Rolling Shower Chaise

The Ableware Rolling Shower Chaise is a caster shower chair designed for use with children with mobility disabilities. FRAME: Aluminum frame with an extended front bumper bar to protect the child's feet. SEAT: A molded seat in lavender or turquoise. The seat has adjustable safety straps, a four-position, height-adjustable headrest, a holder for a hand-held shower, and a soap holder. CASTERS: Four black casters. The two rear casters include foot-operated brakes.

Above-Ground Pool Lifts (Models Ag48Wp, Ag48, Ag60, & Ag72)

Aquatic Access Above-Ground Pool Lifts (Models AG48WP, AG48, AG60, and AG72) are water powered lifts designed to assist persons with disabilities to enter and exit pools constructed above ground. Suitable for pools up to 4-feet deep at the point the lift is installed, the Pool Lift allows a person to ride up 30 inches, turn over the wall of the pool, and ride down 30 inches into the water. The stainless steel cylinder mounts to a 4 by 4 foot treated post sunk 30 inches into the ground and cut to

Abracadabra Dress

The Abracadabra Dress is a women’s dress designed for wear by senior women or those with upper extremity disabilities or who have difficulty dressing. Made of poly-cotton fabric, this adaptive dress features back closure, a double yoke with three snaps, and a full bodice with two Velcro back closures. Other features include two patch pockets on the front and a lace-edged collar sewn on a V-neckline. The dress is available with short- or three-quarter-length sleeves and in knee length for full co

Abracadabra Gown

The Abracadabra Gown is a women’s nightgown designed for use by women with upper extremity or fine motor disabilities. Made of polyester and cotton blend fabric, this knee-length gown features a double yoke for added warmth to shoulders, three snaps positioned off-center to avoid spinal pressure points, and a full bodice with two Velcro back closures. The gown is machine washable. OPTIONS: Available with a pocket for heart monitor or slit by request. SIZES: Small, medium, large, and extra large.

Abs Plastic Tray (Models 1719, 2121, & 2124)

Molded ABS Lapboard with an edge rim. Three sizes: 17 1/2 by 19 1/2 inches; 21 1/2 by 21 inches; and 21 1/2 by 24 inches. Attaches to wheelchair armrest with bayonet style hardware, adjustable for different wheelchair widths. Accessories: clear (PET) shield that snaps onto the tray for use with symbol charts. The shield becomes scratched with use and must be replaced when it becomes difficult to see through.

Abs Plastic Trays

ABS Plastic Trays can be used on wheelchairs and prone standers. The front edge and sides have a rim to prevent objects from falling off the tray. Models are available with or without cutouts. Tray glides available. DIMENSIONS (WxD): 20 x 20 inches with a 5 inch cutout (Child); and 24 x 20 inches with a 6 inch cutout (Adult). COLOR: Beige.

Accella Series (Models 6030, 4830 & 6024)

The Accella Series, models 6030, 4830, and 6024 are computer work centers and height-adjustable work tables designed for use by individuals who use wheelchairs. The height adjustment, which is accomplished using the built-in hand crank, also provides access for individuals who stand or use standing aids while working. The hand crank is located underneath the tabletop and folds out of the way when not in use. The standard table has a laminate top, anodized aluminum pedestal, and steel feet. OPTIO

Accella Treatment Table (Model 6030)

The Accella Treatment Table, model 6030 is a treatment table designed for use with children in therapy settings. The height-adjustable table features a permanently attached treatment mat of bacteria-resistant reinforced vinyl covering over padded high-density polyurethane foam, and height adjustment using a built-in hand crank. The lower heights facilitate transfers, while the higher levels accommodate treatment. DIMENSIONS: The table has a height adjustment range of 24 to 36 inches and a surfac

Accenda Voice Activated Alarm Clock

The Accenda Voice Activated Alarm Clock is a voice input and voice output alarm clock designed for use by individuals with low vision or mobility or upper extremity disabilities. This vertical talking alarm clock responds to voice commands and provides voice responses. The words "Alarm Clock" trigger the voice activated clock to listen to and respond to following phrases: "What time is it?"; "Play memo"; "Snooze"; "Night Light"; and many more. Ask "what time is it?" and the clock announces the t

Access Liberty

The Access Liberty is an accessible sailboat designed for use by individuals with severe physical disabilities or spinal cord injury. This schooner-style boat has a single hammock seat and is steered by a manual joystick operating twin rudders to maintain helm control when fully heeled. High coamings and wide side decks keep the boat dry even at extreme angles of heel. It has a mainsail and a free standing jib (foresail), which are both reefed and unreefed by single hauling lines. The mainsail i

Access Platform And Rail

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted access platform and rail for a child with cerebral palsy to allow her to access an interactive white board at her learning program. A young student with cerebral palsy participates in a learning program that is projected onto an interactive whiteboard. The children are then encouraged to choose answers on the whiteboard. Due to her cerebral palsy, the young girl's muscles are tight and tense making fine and gross motor take

Access Ramp

The Access Ramp is a swimming pool ramp designed for use by individuals with mobility, severe physical, or lower extremity disabilities or spinal cord injury. Custom fabricated for each pool, this ramp has a structural fiberglass T-Bar slip-resistant surface and wheels for portability. Mounting hardware is included. DIMENSIONS (LxW): 15 feet x 36 inches. CAPACITY: 400 pounds.

Access Route (With Handicap Access Symbol) Suction Cup Sign (Model 2050)

The Access Route (with Handicap Access Symbol) Suction Cup Sign, model 2050, is an access sign designed for use to indicate a wheelchair accessible route. The sign has the words "Access Route" above the International Access Symbol, a stylized drawing of a figure seated in a wheelchair. This sign can be hung in a window. The sign comes with 3 suction cups installed on the face of the sign, and a box for storage and transport. This sign is compatible with the Voter's Choice Portable Sign System. D

Access Route Barricade Tape (Model 2110)

Access Route Barricade Tape, model 2110, is a wheelchair access sign designed to mark an accessible route or pathway for individuals with lower extremity or mobility disabilities or spinal cord injury. The tape in this roll repeats the phrase, "Access Route," and the International Access Symbol, a stylized drawing of a figure seated in a wheelchair. DIMENSIONS (LxW): 200 feet x 3 inches. COLOR: Blue with white letters and symbol.

Access Route Sign (Model Sg-110F)

The Access Route Sign, model SG-110F, is an access sign designed for use to provide directional guidance for wheelchair users. The sign has a disabilities symbol (a stylized drawing of an individual in a wheelchair) with the word "Access" above the symbol and the word "Route" below. The sign is made from corrugated plastic for all weather conditions and attaches to the Corrugated A-Frame (model SG-F), which is sold separately. DIMENSIONS (HxW): 22 x 14 inches. COLOR: Blue and white.

Access Route With Handicap Symbol Sign (Model 1992)

The Access Route with Handicap Symbol Sign, model 1992, is an access sign designed for use to indicate a wheelchair accessible route. The sign is made of durable plastic and is screen printed on both sides with the words "Access Route" above the International Access Symbol, a stylized drawing of a figure seated in a wheelchair. It fits the Voter's Choice Portable Sign System (not included). DIMENSIONS (HxW): 16.25 x 10 inches. COLOR: White letters and drawing on a blue background.

Access Stairs

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted set of stairs to access a bed for a child with cerebral palsy, developmental delay, and vision and hearing impairment. The child required a raised bed with side railings to keep her safe at night, but it had to be easily accessible without caregivers having to bend over when caring for the child. The bed is 880 millimeters above the floor and has fixed railings on three sides; the railing on the fourth side slides up and do

Access4U Mini Wheelchair Ramps

Access4U Mini Wheelchair Ramps are designed for use to make steps or other rises wheelchair accessible. These lightweight ramps can be used semi-permanently on one to two steps. They have a welded aluminum frame with an aluminum skid-resistant deck. DIMENSIONS (LxW): 2, 3, 4, 5, or 6 feet x 30 or 36 inches. Custom sizes are available. CAPACITY: 600 pounds.

Access4U Modular Wheelchair Ramp

The Access4U Modular Wheelchair Ramp is a modular ramp designed to provide wheelchair access for individuals with mobility disabilities or spinal cord injury. These ramps are assembled from stock sections and can be configured to the user's home for permanent use on two or more steps. Modular systems include an aluminum frame, a two-rail handrail, an entry plate, adjustable legs, an ADA curb, vinyl or aluminum no-skid decking, an exit plate, and hardware. Systems are available with 90-degree tu

Access4U Portable Folding Ramp

The Access4U Portable Folding Ramp is a portable ramp designed for use by individuals with mobility disabilities or spinal cord injury. This ramp provides wheelchair access over one or two steps or a curb. The ramp is made of welded aluminum and folds to fit in a car trunk or van. DIMENSIONS (LxW): 2, 3, 4, 5, or 6 feet x 30 or 36 inches. Custom sizes are also available. CAPACITY: 600 pounds.

Accessabath Bath Safety System (Models Ab603072Sa And Ab603072Sa-Wc)

The AccessaBath Bath Safety System, models AB603072SA and AB603072SA-WC, is a roll-in shower with a seat and grab bars designed for use by individuals who use wheelchairs and individuals with balance or mobility disabilities. System components include one wheelchair accessible shower pan (models FBF-3060L or FBF-3060R) or retro-fit shower pan (models FBF-3260L or FBF-3260R); one barrier free ramp (model BF1260); one flexible threshhold (model BF-FT); one folding-L transfer seat (model HS 553N) o

Accessaphone Total Conversation

accessaphone Total Conversation is computer based text telephone and videophone designed for use by individuals with hearing, vision, speech, cognitive, or mobility disabilities. This system features telephony with simultaneous video, text and audio and is compatible with Braille readers and uses standard session initiated protocol (SIP). For users who are deaf or hard of hearing, the system provides simultaneous video, text,and speech and supports real-time text. For users who have difficulty i

Accessible Entrance Sign

Accessible Entrance Signs are wheelchair access signs designed for use by individuals with mobility disabilities. Signs include the international accessibility symbol with either a left arrow, a right arrow, or no arrow. Signs are made from a heavy-gauge sign grade aluminum alloy. The corners are rounded and the edges are smoothed to prevent injury. Holes for mounting are located in the middle top and bottom to match standard sign posts. The signs are non-reflective with a painted and baked-on e

Accessible Entry System (Model Aes-2000)

The Accessible Entry System, model AES 2000, is a building entry system designed for use by individuals who are blind or have low vision. The system includes a large print and voice output tenant directory with both written and verbal operating instructions. The system's visual display uses half-inch high black characters against a back-lit green background. The system incorporates the etched tactile diamond shaped EZ Help system developed by the University of Wisconsin TRACE Center. Pressing th

Accessible Kitchen Counter

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual who use a wheelchair to get under and use a counter. A molded laminate countertop can be supported by installing upright shelf tracks on the kitchen wall and adding deep shelf brackets. Wheelchairs fit underneath and the counter is thin enough to be useful. TITLE: The Accessible Kitchen Counter. WEB SITE: Workshop Solutions at http://www.workshopsolutions.com/COMPLETE/counter.htm. REF: The originator, Bruce Barney, can be contacted at efn

Accessible Living Collection - Accessible Cabinets

The Accessible Living Collection - Accessible Cabinets are accessible kitchen components designed for use by wheelchair users. These base cabinets for the kitchen feature countertops low enough to be accessible to wheelchair users, toe kicks allowing for wheelchair access, and wheelchair reachable storage options. Cabinets in the collection include an Accessible Tambour Base Cabinet, an Accessible Base Lazy Susan, an Accessible Base Cabinet with Pullout Table, an Accessible Dishwasher Base Cabin

Accessible Passenger Loading Zone Sign

The Accessible Passenger Loading Zone Sign is a wheelchair access sign designed for use by individuals with mobility disabilities. The sign includes the international accessibility symbol above the words "Accessible Passenger Loading Zone." These signs are made from a heavy-gauge aluminum alloy, with rounded corners and smoothed edges to prevent injury. Mounting holes are located in the middle top and bottom to match standard sign posts. The stroke and spacing of the letter style are designed fo

Accessible Saddle Threshold

Handicap accessible thresholds made of mill aluminum, anodized dark bronze alluminum, or mill brass, with various treads. DIMENSIONS: Thresholds have a maximum center-threshold height of 0.25, 0.31, 0.5, or 0.63 inches, with lengths of 2.5, 3, 4, 5, 6, 7, or 8 inches.

Accessible Scoop Digger

Accessible Scoop Digger is designed for children of all ages with or without mobility disabilities.  It is an interactive sand play tool that promotes sensory development and offers child initiated activities. The Scoop Digger rotates 360 degrees and the Accessible Scoop Digger rotates 180 degrees to give children a full range of movement.

Accessible Scooter With Putt-Putt Attachment

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: To provide support during a recreational game of putt-putt golf.

Accessible Voter Parking (With Handicap Access Symbol) Suction Cup Sign (Model 2060)

The Accessible Voter Parking (with Handicap Access Symbol) Suction Cup Sign, model 2060, is a parking area marker for a polling place and access sign designed for use to indicate wheelchair accessible parking near a polling place. The sign has the words "Accessible Voter Parking" above the International Access Symbol, a stylized drawing of a figure seated in a wheelchair. It comes with three suction cups installed on its face allowing it to be mounted on the inside of a window near parking on E

Accessible Voter Parking Sign With Handicap Access Symbol (Model 2002)

The Accessible Voter Parking Sign with Handicap Access Symbol, model 2002, is a parking area marker for a polling place and access sign designed for use to indicate wheelchair accessible parking near a polling place. The sign is made of durable plastic and is screen printed on both sides with the words "Accessible Voter Parking" above the International Access Symbol, a stylized drawing of a figure seated in a wheelchair. DIMENSIONS (HxW): 16.25 x 10 inches. COLOR: White letters and drawing on a

Accesstair (Models Vmh36, Vmh42, & Vmh48)

AccesStair VMH is a platform wheelchair lift designed for use by individuals who use wheelchairs. This lift is a set of stairs with railings that, at a push of a button, converts into a vertical platform wheelchair lift. The steps slide back into the unit, similarly to a stadium bleacher system and the powder-coated steel handrails move vertically with the platform. The stairs are securely held in extended position for safe use as a stairway and retract into a stowage area under landing when the

Accurelief Remote Wireless Tens

The AccuRelief Wireless Remote Control TENS (Transcutaneous Electrical Nerve Stimulation) offers pain relief at the touch of a button. It is designed for use by athletes and individuals with fibromyalgia and arthritis. The AccuRelief Wireless Remote Control TENS consists of two uniquely designed gel pads which encircle those painful, out of reach areas. This unit comes with a combination program that delivers gentle electrical pulses with three therapeutic phases of alternating therapy. Have a c

Achievement Deep V Positioner

The Achievement Deep V Positioner is a side lying positioner designed for use by children and adults with mobility or severe physical disabilities. This unit enables users to maintain a comfortable side lying position without restraining straps. This V-shaped sidelyer is constructed of a high density, flame-retardant foam with a flame resistant vinyl cover. SIZES: Small, medium, and large. DIMENSIONS (WxLxD): The small positioner is 12 x 48 x 11 inches. The medium positioner is 22 x 60 x 11 inch

Achievement Deluxe Sidelyer

The Achievement Deluxe Sidelyer is a side lying positioner designed for use with children with neurological and physicdal disabilities. Designed to ease positioning for children, this unit enables children to lie on their left or right side in a secure, comfortable position. This positioner includes two padded safety belts that adjust for the girth and the height of the child. Made of high density flame retardant foam, this side lyer is covered with 21-ounce, flame-retardant vinyl and secured to

Achievement Modified Incline Ramps

The Achievement Modified Incline Ramps are positioning wedges designed for use with children or adults with mobility, severe physical, or neurological disabilities or spinal cord injuries. These wedges are intended to provide gentle support when positioning an individual in a supine or prone position. Constructed of firm, comfortable, fire-resistant foam, these wedges are covered in extra heavy- duty anti-bacterial fire-retardant vinyl. Velcro-backed safety straps are included. These wedges can

Achievement Positioning System

The Achievement Positioning System is a positioning wedge system designed to provide firm, comfortable positioning for children and adolescents with neurological or severe physical disabilities. This system can be used in a variety of configurations including prone, supine and sidelying positioning. Unit assembles as a cube for easy storage and has Velcro tabs for connecting the pieces. The wedges are made of fire-retardant dense foam and easy to clean vinyl. SIZES: The set includes two small we

Achievement Rolls

The Achievement Rolls are therapy rolls designed for use by individuals with mobility, neurological, or balance disabilities. These brightly colored rolls can be used for rolling, rocking movements, positioning, and coordination training with children. Soft, yet firm, these bolsters are made of high compression foam covered in anti-bacterial, flame-resistant vinyl. DIMENSIONS (HxL): 4 x 18 inches, 6 x 24 inches, 8 x 15 inches, 8 x 24 inches, 8 x 36 inches, 10 x 36 inches, 12 x 36 inches, 14 x 4

Achievement Wedges

The Achievement Wedges are child positioning wedges designed for use with children with mobility, neurological, or lower extremity disabilities. Intended to provide therapeutic positioning and exercise for children, these colorful durable wedges are made of high- compression foam and covered in heavy-duty fire- retardant anti-bacterial vinyl. DIMENSIONS (HxWxL): 4 x 20 x 22 inches, 4 x 30 x 22 inches, 6 x 14 x 26 inches, 6 x 20 x 22 inches, 6 x 24 x 28 inches, 8 x 20 x 22 inches, 8 x 24 x 28 inc

Acorn Superglide 120

The Acorn Superglide 120 is an interior stair lift designed for use by individuals with balance, lower extremity, or mobility disabilities or arthritis. Designed for home use, this straight stair lift features directional paddle switches, a digital status display, smooth start/stop action, a lockable isolation switch, two infra-red remote controls, five safety sensors, electronic and mechanical braking systems, and quiet operation. The track is made of extruded aluminum. The lockable, swiveling,

Acorn Superglide Outdoor Stair Lift

The Acorn Superglide Outdoor Stair Lift is an exterior stair lift designed for use by individuals with balance, lower extremity, or mobility disabilities or arthritis. Designed for outdoor use, this lift features directional paddle switch controls, a digital status display, smooth start/stop action, a lockable isolation switch, two infrared remote controls, five safety cut-out sensors, electronic and mechanical braking systems, and quiet operation. The lockable, swiveling, padded seat has a foot

Acrobat

The Acrobat is a folding tilt-in-space wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: 12 to 14 inches, 14 to 16 inches, or 16 to 18 inches. The folding frame is equipped with anti-tippers and comes in a choice of black, navy blue, deep purple, red, or teal. SEAT: 2-inch wide seatbelt with auto buckle is optional. ARMRESTS: Angle-adjustable swing-away armrests with telescoping tray supports. BRAKES: Includes bra

Act Wheelchair

The Act Wheelchair is a lightweight adult wheelchair designed for use by individuals with mobilitiy disabilities. FRAME: Rigid titanium frame in a choice of a short or long configuration. The frame is available in a standard choice red, black, olive green, and steel blue smooth finishes and sea green, blue, plum, or grey textured finishes. Anti-tips are optional. Blue chrome and black graphite finishes are optional. SEAT: The height- and angle-adjustable seat is available in a choice of 14, 15,

Action Pilot Cushion (Model 9000)

The Action Pilot Cushion, model 9000, is a gel flotation seat cushion designed for people with lower extremity, mobility disabilities or spinal cord injury who are at risk for pressure sores and ulcers. The pads features a 1-inch thick layer of Akton polymer with a cover. It is recommended for use on manual and power wheelchairs, truck or taxi seats, or for other uses requiring significantly reduced high pressure areas, vibration and shear. OPTIONS: Incontinence cover. DIMENSIONS (LxW): 16 x 16,

Action Pro, Action Pro-Sa & Action Pro-T

The Action Pro Series wheelch are manual drive sport wheelchairs for individuals with mobility disabilities. FRAME: Rigid aluminum frame available in a choice of colors. Anti-tips are optional. SEAT: Seat width from 14 to 20 inches in 1-inch increments; seat depth ranges from 14 to 18 inches in 1-inch increments; the seat height is adjustable in ranges from 8 to 12 inches, 10 to 14 inches, 14 to 18 inches, and 16 to 20 inches. The fold-down backrest angle adjusts from 0 to 8 degrees. Optional p

Action Trackchair (Model Sm)

The Action Trackchair, model SM, is a powered sport wheelchair designed for use by children and adults of short stature with lower extremity, mobility, or neurological disabilities or spinal cord injury. This wheelchair is designed for off-road use, and it features a pair of caterpillar tracks instead of wheels. It has a turning radius of zero. FRAME (LxWxH): 42 x 33 x 38 inches. Length is 48 inches with rear idlers. The ground clearance is 3.5 inches. There are two accessory holders on each sid

Action Trackchair (Model St)

The Action Trackchair, model ST, is a powered sport wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. This wheelchair is designed for off-road use, and it features a pair of caterpillar tracks instead of wheels. It has a turning radius of zero. FRAME (LxWxH): 42 x (37, 39, 41 or 43) x 38 inches. Length is 48 inches with rear idlers. The ground clearance is 3.5 inches. There are two accessory holders on each side of the chair

ACTIV 500

The ACTIV 500 is designed to enable independent living for use by individuals with physical, cognitive and/or sensory difficulties as a result of multiple sclerosis, cerebral palsy, stroke, or arthritis.  It promotes a huge range of everyday tasks through infrared and radio control.  The ACTIV 500 can be configured to operate over 2000 functions around the house, granting a new kind of freedom to users, whatever their disability.  It features a large, easy-press button control and two connection

Activator

Activator is a folding lightweight manual wheelchair designed for use by individuals with mobility disabilities. This chair is designed to be flat-packed for loading into a car. FRAME: Rigid cantilevered titanium tube frame with front locking hinges made of solid titanium.

Active Foot Rest

The Active Foot Rest is a footstool designed for use by individuals with lower extremity and back disabilities. Designed with a sturdy plastic frame, this footstool adjusts to three different heights to provide optimal positioning. DIMENSIONS: The height range is 2.75 to 6.75 inches. COLOR: Black, blue, red, or white.

Active Heavy-Duty Reacher (Models Sw5126, Sw5127, & Sw5128)

The Active Heavy-Duty Reacher is designed for use by individuals with mobility disabilities. Designed to lift heavier objects, this reacher has a straight, bulb-style handle and trigger-activated U-shaped gripping jaws with textured rubber tips for a firm grip. A strong magnet at the end of the handle aids in picking up metal objects. DIMENSIONS: The jaws on all models open to 2 inches. Model SW5126 is 24 inches long, model SW5127 is 28 inches long, and model SW5128 is 31.5 inches long. WEIGHT:

Active Life Station

The Active Life Station is an accessible table designed for use with children and adults with severe cognitive, emotional, or physical disabilities who require constant supervision. This table system surrounds the user on all sides, with one side being a secure access door. The individual's wheelchair or feeder seat is positioned on a 360-degree rotating base in the center, enabling the user to access table surfaces on all sides. The station can be used for watching television, using a computer,

Active Wheelchair Platform Rocker

The Active Wheelchair Platform Rocker is a rocking attachment for a wheelchair designed for use by individuals with mobility or neurological disabilities, Alzheimer's disease, or spinal cord injury. This unit is designed to enable an individual to experience the benefits of rocking without transfering from a wheelchair. The rocker features an entry/exit rear ramp, adjustable front caster stops to center the wheelchair on the platform, and two safety wheelchair tie-down straps. The Active Platfo

Activehome Pro

ActiveHome Pro is an environmental control system designed for use by individuals with mobility disabilities. Theis basic home automation system consists of software and a USB computer interface. The system can turn lights and appliances on and off according to a schedule, or at the press of a single button. Other capabilities include providing the user with a warm welcome home every night; turning lights on and off in a realistic way for security while the user is away; and lowering energy bill

Actively Adjustable Cane To Assist Standing From A Sitting Position

PROTOTYPEPURPOSE: To design a cane that can assist an individual with mobility disabilities with walking and provide assistance as the individual stands from a seated position. The cane prototype consists of three major components: 1) a prefabricated ratcheting device, 2) a slide rod, and 3) a pair of telescoping rods. The ratcheting device was taken from a caulk gun. It uses springs and small plates to form a trigger and a locking mechanism. The locking mechanism prevents the rod from sliding

Activity Lap Tray (Model 17698)

The Activity Lap Tray, model 17698, is a lapboard or lap tray designed for use by children ages 3 years and above and adults with mobility disabilities. Made of polypropylene plastic, this tray fits over the lap when the user is seated. The Activity Lap Tray consists of a firm flat tray between two side pockets that extent below the tray and act as the supports when the device in placed on the lap. On the tray, the user can write, play games, create crafts and perform other activities. The side

Activity Tray Swivels (Model 70675-0000)

The Activity Tray Swivels, model 70675-0000, is a swing away lapboard designed to be attached to the tubing on most wheelchairs. The tray is made of birchwood and has a clear non-slip finish on the top surface. The tray has a lip to keep items from rolling off. It is supplied with a flat triangular aluminum support and a screw-mounted 3/8-inch long aluminum spindle at one corner. DIMENSIONS: 13 x 17 inches.

Acuback Heat Roller For Back Pain Relief

The Acuback heat roller is designed to relieve tension with therapeutic warmth. IT is microwavable and offers back and neck support. Nubby or textured supports create acupuncture-like therapy to release tight muscles and the design recreates the natural curve of the lumbar spine. Realigns the upper back and neck. Place it under neck, lower back, legs, or hands. Warm in microwave for one minute for 75 minutes of deep, soothing heat. Carrying case included.

Ada Accessible Portable Science Lab (Model Pse-2041)

The ADA Accessible Portable Science Lab, model PSE–2041, is a portable, accessible science work station designed for use by individuals with lower extremity and mobility disabilities or spinal cord injury and others who use wheelchairs. This workstation is designed for use in classrooms and science laboratories to allow students who use a wheelchair access to scientific experiments in a classroom setting. Made with a sturdy aluminum bar frame and heavy duty solid plastic panels, this unit resemb

Ada Adaptable Roll-In Shower (Model 62060103)

The ADA Adaptable Roll-in Shower, model 62060103, is a modular roll-in shower designed to provide shower access for wheelchair users. Made from solid Vikrell material, its modular design allows it to be moved around corners and through doorways. Components include an End Wall Set (model 62065103), Receptor (model 62061100), and Back Wall (model 62062103), which snap together with tongue-and-groove installation. Features include a lightly textured swirl-gloss finish, a low profile threshold for w

Ada Adaptable Transfer Shower (Model 62050115)

The ADA Adaptable Transfer Shower, model 62050115, is an accessible modular shower stall designed for use by individuals in wheelchairs. Made of solid Vikrell, this four-piece shower stall can be moved around corners and through doorways, and be fit back together with tongue-and-groove connections. Components include a Receptor (model 62051100), End Wall Set (model 62055115), and Back Wall (model 62052113). The stall has a low-profile threshold for wheelchair access; structurally reinforced fact

Ada Compliant Ultra Flush Two Piece Pressure-Assist Toilet (Models 21-317, 21-318, & 21-319)

The ADA Compliant Ultra Flush Two Piece Pressure-Assist Toilet is a tall toilet designed for use by individuals with mobility disabilities. This high, elongated toilet has a water consumption of 1.6 gallons per flush (gpf), with pressurized flushing and siphon-jet flush action. Model 21-319 features a bedpan rim. The seat is not included. DIMENSIONS (HxDxW): 30.5 x 28.25 x 20.25 inches (model 21-317), 30.5 x 28.75 x 20.25 (model 21-318), or 30.25 x 30 x 20.5 inches (model 21-319). The rim height

Ada Compliant Wheelchair Accessible Desk (Model 876)

The ADA Compliant Wheelchair Accessible Desk, model 876, is a height adjustable classroom desk designed for use by children who use wheelchairs. This table has a polyester powdercoated frame, nickel-chrome plated legs, and either a fiberesin-laminate or plastic desktop. The telescoping legs are adustable by sliding the lower leg inserts into the upper legs and tightening a set screw. The lower leg inserts have adjustable nylon glides and optional locking wheels. DIMENSIONS (LxW): The table top i

Ada Fountain (Model Tf7070)

The ADA Fountain, model TF7070, is an accessible drinking fountain designed for use by wheelchair users. Made of steel reinforced concrete, this outdoor drinking fountain for parks, trails, and sports fields is configured to be accessible to an individual seated in a wheelchair. The unit comes assembled and with plumbing included. It is colored with a smooth stain, and is available with an inkjet or cast logo. DIMENSIONS (HxLxW): 34 x 39.25 x 21 inches. Reinforcing bar is 0.25 inches thick. WEIG

Ada Height Adjustable Podium (Model 70)

The ADA 70 Podium is a height-adjustable podium or lecterndesigned for use by individuals of any height or who use wheelchairs. The option of purchasing shelves and drawers is available so that audiovisual equipment can be integrated into the Podium. This podium features a fixed lectern shelf, power and cable management subsystems, external electrical outlets, a master power switch, and an input/output box. DIMENSIONS (WxDxH): 58.25 x 30.5 x 35.75 to 50.5 inches. COLOR: Mahogany woodgrain is sta

Ada Ice Machine (Model 30Ima)

The ADA Ice Machine, model 30iMA, is an under counter ice maker designed to be accessible to wheelchair users. The unit fits under countertops with lower heights, allowing an individual seated in a wheelchair to reach it. It produces up to 35 pounds of clear cubed ice per day, and stores up to 30 pounds of ice. The unit has full auto-defrost, and rrequires a gravity drain or a drain pump. Its field- reversible door has a frame that accepts a quarter-inch custom panel. OPTIONS: Marvel drain pump;

Ada Line-Of-Sight Desk

The ADA Line-Of-Sight Desk is a height adjustable classroom computer desk designed for use by students who use wheelchairs. The height- adjustable base allows the user to raise the height of the desk, while a line-of-sight liquid crystal display (LCD) monitor lift allows the user to raise or lower the monitor by pressing a button. DIMENSIONS: Desktop range is 27 to 46 inches high.

Ada Prisoner Transport Chevy Van

The ADA Prisoner Transport Chevy Van is a custom built van conversion designed for use to transport prisoners seated in wheelchairs. This vehicle is built to optimize space, safety, and security for both the transporters and the prisoners. It includes video and networking capabilities that allow the transporters to monitor the status of the prisoners without stopping the vehicle and compromising their own safety. All compartments are equipped with advanced mobile digital video recorders (DVR), w

Ada Ramp Thresholds (Models 442S, 443S, & 444S)

The ADA Ramp Threshold is a threshold ramp designed to provide wheelchair access for individuals with lower extremity or mobility disabilities or spinal cord injury. Model 442S provides a 1:12 slope from the floor to a point 0.5 inch higher. Model 443S provides a 1:12 slope starting from the edge of a threshold. Model 444S is a combination of 442S and 443S. Made of mill finished anodized aluminum, the ramp comes with ten 1.5-inch flat head wood screws. OPTIONS: Sure-Step non-slip abrasive coatin

Ada Restroom Sign With Braille (Models 507, 508, 509, 527, 528, & 529)

These Handicap Signs are access signs designed for use to indicate restrooms for individuals who are blind or have low vision, or to indicate wheelchair-accessible restrooms for individuals with mobility disabilities. Signs are for Men's, Women's, or unisex restrooms with or without wheelchair access, and include a pictogram of a man and/or a woman, with or without the international handicapped access symbol. The appropriate text is included (Men, Women, or Restroom for unisex restrooms). All si

Ada Series Classic Design

ADA Series Classic Design is a kitchen with accessible components designed for use by individuals with lower extremity or mobility disabilities, spinal cord injury,short stature, or other physical disabilities. This compact adjustable kitchen system includes an under-counter refrigerator, cooktop, oordinated finishes, and storage space for dry goods and cooking supplies. The Adaptable Sink Base easily converts to meet Americans with Disabilities Act specifications and the folding design stores c

Ada Stainless Steel Double Basins Sink (Model Pse-2020D)

The ADA Stainless Steel Double Basins Sink, model PSE–2020D, is a portable accessible sink designed for use by individuals who use wheelchairs. This portable accessible sink is equipped with two basins, each of which has a single lever faucet for each. The unit has a two 5-gallon tanks for fresh water and two 8-gallon tanks for waste water. An adjustable water heater allows the water temperature to be adjusted up to 145 degrees. It has six safety casters so it can be moved easily on firm flat su

Ada Stainless Steel Sink (Model Pse-2020)

The ADA Stainless Steel Sink, model PSE–2020, is a portable accessible sink designed for use by individuals who use wheelchairs. This single-compartment sink features a single handle for the faucet, and it provides hot and cold running water. The PSE–2020 has a 5-gallon tank for fresh water and a 7-gallon tank for waste water. It has a 20 AMPS Preset water heater, and it rolls on four safety casters. OPTIONS: Motion sensor and water filtration. DIMENSIONS: Cabinet (WxDxH): 34 x 18.5 x 31.75 inch

Ada Tactile Sign - Access Left/right (Models 369L & 369R)

The ADA Tactile Sign - Access Left/Right is a braille and tactile access sign designed to indicate wheelchair access for individuals with mobility or visual disabilities or spinal cord injury. The sign is made of plastic with a raised international access symbol (a stylized figure in a wheelchair) facing in the direction of a left arrow (model 369L) or right arrow (model 369R) above the word ACCESS. A Grade 2 braille translation is at the bottom. The sign is individually packed in a poly bag, an

Ada Tactile Sign - Exit (Model 368E)

The ADA Tactile Sign - Exit, model 368E, is a braille and tactile access sign designed for use by individuals who use wheelchairs and individuals who are blind or have low vision. This plastic sign has a raised international access symbol (a stylized figure in a wheelchair) above the word EXIT, with a Grade 2 braille translation at the bottom. Signs are individually packed in a poly bag, and are fastened with double-sided pressure sensitive tape. DIMENSIONS (HxW): 8 x 6 x 0.13 inch thick. COLOR:

Ada Tactile Sign - Unisex/men/women (Models 368U, 368M, & 368W)

ADA Tactile Sign - Unisex is a braille and tactile bathroom access sign designed for use by wheelchair user and individuals who are blind or have low vision. This plastic sign has a raised international access symbol (a stylized figure in a wheelchair) above the word MEN (model 368M), WOMEN (model 368W), or UNISEX (model 368U), with a Grade 2 braille translation at the bottom. Signs are individually packed in a poly bag, and are fastened with double-sided pressure sensitive tape. DIMENSIONS (HxW

Ada Transfer Shower Stall (Model C4136Bffus)

The ADA Transfer Shower Stall, model C4136BFFUS, is an accessible shower stall designed for use by individuals with mobility disabilities. The enclosure is molded from a single sheet of Lucite cast acrylic with no joints or seams, and with a trench drain system that directs water to the center drain, which is brass with a stainless steel strainer. A fold-up seat allows transfers from wheelchair to shower. Factory installed accessories include one wrap-around grab bar and one straight grab bar mo

Ada Undercounter Refrigerator (Model 6Ada)

The ADA Undercounter Refrigerator, model 6ADA, is a below counter refrigerator designed to be accessible to wheelchair users. This 5.4 cubic foot capacity refrigerator fits under a 34-inch high countertop. It has two easy-pull wire shelves with safety stops to prevent spillage. The top wire shelf has a 6.5-inch flip-up section to allow the user to store tall items underneath. Other features include an automatic interior light and full auto defrost. OPTIONS: Stainless steel door panel. DIMENSIONS

Adalap

The ADALAP is a lap desk designed for use by individuals who use wheelchairs. The basic unit includes the base and pole with a top plate with a Velcro loop. Made from lightweight anodized aluminum alloy with stainless steel fasteners, the unit has a base that slides right under the wheelchair seat cushion. Height adjustment is accomplished with a quick-release clamp.OPTIONS: Fresh or salt water fishing rod holder; Snap Lap Desk; Lap Shopper shopping basket; lap tray; accessory mount for camera,

Adapt-A-Cut

Adapt-A-Cut is designed for students who have difficulty holding and using standard scissors while holding and using standard scissors due to fine motor and dexterity challenges. The handle adapts with Velcro for extra support as well as a crossbar for horizontal support. Students use a "pushing" motion rather than grasping and squeezing motion. The blade is safely inside the tool. Adapt-A-Cut can be used with the Adapt-A-Hold, Item 3051 (not included).

Adapta Helmet

The Adapta Helmet is a protective helmet designed to provide head protection for adolescents and adults with balance or mobility disabilities or seizures. This helmet features a molded polyethylene shell with a thick foam inner lining. It has air vents to keep the head cool. The Adapta Helmet fits head circumferences that measure from 16 to 26 inches. OPTIONS: Replacement chin strap. DIMENSIONS: Measures 6 inches from top to ear hole.

Adapta Van

The Adapta Van is a van conversion designed for commercial business and organizations that provide transport for individuals who use wheelchairs. Conversions can be done for Chevy, GMC, and Ford vans. Features include an aerodynamic fiberglass top, raised cargo doors, solid core marine grade plywood with lap jointed seams covered with non-slip diamond patterned vinyl, and a four-point wheelchair securement system with recessed aluminum L-track. Conversions can accommodate a variety of interior t

Adaptation Of Axillary Crutches.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Adaptation of an axillary crutch to allow a high upper extremity amputee in a non- weightbearing leg cast to ambulate with crutches. The crutch adaptation consisted of a figure eight harness which went around the patient's shoulders and fastened with velcro around the top of the crutch to hold it under the arm; and a frame to hold the crutch 6 inches from the cast so it moved with the leg and did not scissor in front of the patient. Includes photograph

Adapted Battery-Powered Tricycle

CUSTOM ADAPTATION PURPOSE: To provide a child with multiple disabilities, including cerebral palsy and lung disease, with a means of independent mobility. In consultation with the child’s therapists, a battery-powered Wind Rider tricycle was purchased and custom-modified to the child’s needs. First the existing foot switch was replaced with a hand switch. A control was also added that enables family members to regulate the maximum speed of the bike and limit the rate of acceleration. The socket

Adapted Bocce

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Students with disabilities may experience difficulty in throwing activities, such as bocce. Using the gutter as a ramp provides active participation for those students with movement limitations due to contractures, abnormal muscle tone, etc. The ramp is lightweight, easily transported, and contracts for little storage space. Students may use the ramp as they sit (easiest and great for kids with wheelchairs). Standing, aiming the ramp, and holding th

Adapted Classic Dress (Model 21020)

The Adapted Classic Dress, model 21020, is a women's dress designed for wear by senior women and women with arthritis or other physical disabilities. Made of polyester interlock, this dress offers banded short sleeves and a full open back with five easy touch tab closures down the center for ease in assisted dressing. The dress has side seam pockets, front button detail, shirt collar neck, and a tie belt. SIZES: Extra small, small, medium, large, and extra large. COLOR:Mauve blossom, pink blosso

Adapted Crib

CUSTOM ADAPTATION PURPOSE: To enable an individual with spinal cord injury to care for her infant as independently as possible. A standard wooden crib with drop sides was adapted. First, extensions were added to the legs to provide clearance for the wheelchair to roll under the crib. The extensions were secured with screws so that thee can be removed if necessary. Next the front drop side was removed and cut in half to provide two center opening gates. After the front corner posts were reinforc

Adapted Crutches For Patients With Little Or No Hand Grasp.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Modification to forearm crutch accommodates patient with decreased muscle strength in hands and wrists. Two inch wide aluminum strip attaches to shaft of crutch just above handgrip. Strip is molded across hand and attaches by means of screws to the open end of handgrip. Strip is padded with foam rubber and covered with naugahyde. Photographs included. COMMENTS: User should have near normal range of motion in wrist extension and fair shoulder and elbow

Adapted Grab Bar For An Armchair.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Grab bar to assist person in standing up from upholstered armchair. Two metal strips attach to side frame of armchair. Two steel pipes form the bar. One attaches vertically to the metal strips. The second, horizontal bar attaches to the vertical one. A specially fabricated joint allows the horizontal bar to pivot or to lock in position, providing a stable hand grip. Measurements determine the optimum distance from chair for vertical bar and the optimum

Adapted Jeep

DO-IT-YOURSELF-ENTRY --- PURPOSE: To enable a person who uses a wheelchair to use a Jeep. A used passenger seat, small crane, and a winch were used to create a hoist that lifts the user into the passenger seat and the wheelchair into the rear cargo area. MATERIALS: Automotive passenger seat, small crane, and a winch. TOOLS: Shop tools. SKILLS REQUIRED: Basic shop and mechanic’s skills. TITLE: Doing It Yourself. JOURNAL: Quest. REF: Volume 12, Number 1, January/February 2005. WEB: http://www.mdau

Adapted Paddle Launch Vehicle (Aplv)

---- PROTOTYPE --------- PURPOSE: To create a prototype of an adapted paddle launch vehicle that allows for the launch and retrieval of a kayak and also allows the kayaker to transfer from their wheelchair to the kayak then safely launch the kayak into the water from a boat ramp. There were five major requirements for the adapted padded launch vehicle (APLV): (1) the device should be accessible to the widest possible range of users; (2) transfer from the wheelchair to the kayak should be comfort

Adapted Play Frame

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To custom adapt the height of a play frame for a child with multiple disabilities including cerebral palsy, epilepsy, visual impairment, and developmental delay. The child’s current play frame provides her with stimulation and entertainment. The play frame consists of a square fabric base on which the child lies, and two hooped rods with padded covers which anchor in pockets on opposite corners of the square and cross in the middle. The child had ou

Adapted Potty Chair

CUSTOM ADAPTATION PURPOSE: To enable a child with global developmental delays to use the toilet unaided. An existing Goanna potty chair was adapted to fit over the toilets in a school setting. Four lengths of 30-millimeter tubing with rubber stoppers in the bottom were fitted over the chair's existing legs. The extensions have two separate height settings. To enable the child to use the seat independently, a set of two wide steps were built. The framework was made of 19-millimeter stainless ste

Adapted Recreation Scooter

CUSTOM ADAPTATION PURPOSE: Provide affordable adapted recreational equipment for children with disabilities. In this adaptation, wider footplate and wheels were added to make it more stable and safer for children who need the extra support to help them balance. Under the sides of the wider footplate, wheel components from a set of roller blades were added. The spacing and placement of the added foot plate to the original one must be correct so that all six wheels evenly distribute weight. An ad

Adapted Squirrel Stander

CUSTOM ADAPTATION PURPOSE: To enable a child with cerebral palsy and a chronic lung disease to stand. This stander has a plywood base and radiata pine uprights and a fabric back. The base is adjustable so the frame tilts up to 10 degrees backward. The standard is equipped with a wooden tay with a small lip and Velcro strips in the center to hold toys in place. The tray can be attached as needed at any height using Cowdrey shelf brackets. The fabric back is made of Brezeway, fabric used for outd

Adapted Tricycle

CUSTOM ADAPTATION PURPOSE: Provide affordable adapted recreational equipment for children with disabilities. This adaptation starts with a heavy-duty trike. The main component is a child’s ride-along seat (usually installed on the rear of an adult’s bicycle) which serves as the seat. This type of seat can usually be picked up on the cheap at a garage sale or thrift store. The foot rest area is cut away from the seat to make the foot holders for the pedals. The foot holders are cut about an

Adapted Two Switch Ihome

Adapted Two Switch iHome is designed for use by individuals with upper extremity or neurological disabilities. The play/pause and track advance features of the iHome speaker dock for the iPod and iPhone has been adapted to allow the user to turn their iPod music on and off and scan through songs with the simple touch of two switches. This device is only compatible with a 30 pin dock connector. POWER: Requires 3 AAA Batteries. DIMENSIONS (HxLxW): 6½"W x 4"H x 8"D. WEIGHT: Weight: 1 1/2 lbs. COLOR

Adapted Wing Chun Training Dummy

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create custom adapted martial arts training dummy for an individual with cerebral palsy. A young man with cerebral palsy has an affinity for martial arts, learning all about Taekwondo from a young age but the Chinese martial art of Wing Chun really captured his imagination. Wing Chun is a form of self-defense and promotes awareness of the body. Students are encouraged to practice with a wooden training dummy to improve their form. As a result of h

Adapting A Conventional Drop-In Lavatory For Wheelchair Access

DO IT YOURSELF ENTRY --- PURPOSE: To provide access to a bathroom sink for wheelchair users. This illustrated article demonstrates how to modify the cabinet of a conventional lavatory to provide knee room for wheelchair users. Based on guidelines developed by the Center for Universal Design at North Carolina State University. Raising the counter height above the conventional 32 inches by one to two inches, installing the shallowest possible sink with the drain toward the rear of the bowl, and sl

Adaptivation Flexible Switch Set

The Adaptivation Flexible Switch is a bendable, pressure-activated switch designed to help people with limited mobility. Flexible Switches are adhesive-backed, pressure activated switches. These switches are flexible which allows them to be attached to various objects and surfaces, essentially turning those objects into the switch itself. It activates at the slightest touch whether it comes from above of a shallow angle and only requires less than two ounces of pressure. The Flexible Switch is a

Adaptive Baby Crib

This Adaptive Baby Crib is intended for parents with a physical disability. Is designed and made at home and intended to be adapted according to the needs of the parent. 

Adaptive Connection System

The Adaptive Connection System is a battery charger for use on batteries for electric wheelchairs. All ACS models feature field adaptability which includes: Input of 120 or 240 volt AC, 50 or 60 cycle, International Power Entry System; Output in the form of a plug-in DC cord matched to application need; and Voltage Setting which are adjustable in field to match current and future battery needs. Other features include automatic operation, temperature compensation, quiet operation, short circuit p

Adaptive Cricket Bat

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted cricket bat for motorized wheelchair users to use in to play an adaptive cricket game. This adaptation of the game was developed by the Recreation Service at Northcott in Austrailia. A physiotherapist at Northcott contacted TADNSW to find out if it would be possible to create a cricket bat for individuals who use a wheelchair and have no upper body strength. The bat needed to be adapted and useable to attach to all the vari

Adaptive Device For Polecat Transfer.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Adaptation of a Polecat to aid in wheelchair transfers for persons with some arm and leg muscle strength. Describes a turntable attachment made of two blocks of wood about 10 by 5 by 2 fastened together with a hinge on one side and a gate latch on the other; a semicircular platform with an 8 inch radius nailed to each block; and a hole drilled through platform and block to allow the device to be fastened around a Polecat. The patient places both feet o

Adaptive Full Length Side -Zipper Pants

The Adaptive Full Length Side-Zipper Pants are child's pants or men's trousers designed for use by individuals with mobility disabilities or incontinence or those who are in bed for long periods. These pants feature full-length separating zippers on each outer leg. The zipper is positioned to be zipped from bottom to top. The waistband is fully elastic. SIZES: Small (fits ages 6 to 8 years), medium (fits ages 10 to 12 years), large (ages 14 to 16 years), and extra large (fits ages 16 to 18 year

Adaptive Golf Stick Combo

The ADAptive Golf Stick Combo is a golf accessory designed for use by golf instructors and individuals with balance, mobility, or lower extremity disabilities, spinal cord injury, or arthritis and others who have difficulty bending, stooping, or reaching the ground or who play golf while seated. The combo includes the ADAptive Golf Stick and one Range Pro Tee. The ADAptive Golf Stick has a ball holder and tee holder at the end of a shaft similar in size to a golf club, and it can be used to ins

Adaptive Special Needs Pants And Shorts

Adaptive Special Needs Pants and Shorts are men's, women's, or children's pants, slacks, jeans, or shorts designed for wear by children and adults with mobility or lower extremity disabilities or lower extremity amputation. Pants and shorts are available in a standard choice of polyester/cotton twill or polyester/cotton stretch denim. Additional fabrics are available. The pants and shorts are custom made to order. Wheelchair-style pants and shorts tuck at the hip panel for better fit, have a lo

Adaptive Tote Bag

The Adaptive Tote Bag is a wheelchair back pouch or a carrying bag for a walker designed for use by individuals with balance, walking, or mobility disabilities. Closed, this bag has the appearance of a knapsack. with two hook and loop attaching straps, a flap top, an outer trash receptacle or open pocket and a tissue holder. Inside is a zippered money holder with zipper pull, two pen/pencil holders, and three additional pockets. The bag is made of washable Codura nylon. DIMENSIONS (HxWxD): The b

Adaptor For Pool Lift

CUSTOM ADAPTATION PURPOSE: To enable an individual with spinal cord injury to transfer to a pool. An existing pool lift required an adaptor in order to use a spreader from an indoor lift. The spreader supports the transfer sling used to lower the individual into the pool. The adaptor was made from stainless steel wire and two thimbles purchased from a ship's chandlery. The wire was looped around the thimbles and long-handled tongs were used to crimp a metal loop around each pair of wires. TITL

Add-A-Ramp System

The Add-a-Ramp System is a modular wheelchair ramp designed for use by individuals with mobility disabilities. The modular ramp sections are molded from automotive-grade fiberglass with molded ribs on the underside for stiffness. Ramps and landings are height adjustable to accommodate site conditions. Step sections have four or five steps. All ramp segments, steps, and landings have a molded, skid-resistant surface. Ramps and landings have a slight crown in the center to prevent water accumulati

Add-On Table

CUSTOM ADAPTATION PURPOSE: To provide a dining table for a young woman with mobility disabilities. The add-on table is made of a 5/8- inch plywood and resembles a card table with only two legs. The front edge of the table is attached and removable from the main dining room table with two sturdy hooks. The height of the table has been lowered to a more comfortable level and a semi-circle has been cut out to fit the young woman’s waist, allowing her to get up close. TITLE: The Add-on Table. WEBSI

Add-On Tray, The

DO IT YOURSELF ENTRY --- PURPOSE: To keep crayons, drinks, and other items within reach of a wheelchair user. The add on tray shown was custom built of 3/8-ply to slide over the standard wheelchair tray. Multiple compartments allow her to keep crayon colors and other small items organized and hold drinks. TITLE: The Add-On Tray. WEB SITE: Workshop Solutions at http://www.workshopsolutions.com/COMPLETE/ad_on_tray.htm. REF: The originator, Tom Jeary, can be contacted at tlj@golden.net.

Adjust-A-Pillow Car Neck Pillow

The Adjust-a-Pillow is designed for use by individuals with neck pain, injury, or disability. It keeps users neck in a comfortable position while you're driving, or can even be used around the house when you pick up your favorite book or lay down for a nap. It has six adjustable positions to ensure you have the most support and comfort you can possibly imagine. The material is soft on the skin and the zippered cover can be removed for cleaning. Lay the Adjust-a-Pillow Car Neck Pillow flat to u

Adjustable Aluminum Cane (Model 5586)

The Adjustable Aluminum Cane, Model 5586 has an anodized aluminum finish with a soft plastic hand grip. DIMENSIONS: Height adjusts 28 to 42 inches.

Adjustable Aluminum Cane With Hook (Model 2611) & Offset Handle (Model 2616)

Adjustable aluminum cane with antirattle lock, straight or offset handle models, cushioned grip. Anodized aluminum tubing. Adjustable height 30 3/4 to 40 34 inches, Weight 11 ounces.

Adjustable Aluminum Cane With Offset Cushioned Grip Handle And Wrist Strap

The Adjustable Aluminum Cane with Offset Cushioned Grip Handle and Wrist Strap is an adjustable cane designed for use by individuals with mobility disabilities. The Offset Handle provides additional balance assistance because the hand rests directly over the shaft of the cane. DIMENSIONS: The cane length is adjustable from 29 to 38 inches in 1-inch increments. CAPACITY: 250 pounds. COLOR: Bronze, black, or aluminum finish.

Adjustable Aluminum Cane With Offset Handle

The Adjustable Aluminum Cane with Offset Handle is an adjustable cane designed for use by individuals with mobility disabilities. The Offset Handle provides additional balance assistance because the hand rests directly over the shaft of the cane. DIMENSIONS: The cane length is adjustable from 29 to 38 inches in 1-inch increments. CAPACITY: 250 pounds.

Adjustable Aluminum Cane With Round Handle

The Adjustable Aluminum Cane with Round Handle is an adjustable cane designed for use by individuals with mobility disabilities. This traditionally-styled aluminum cane has a hook handle. OPTIONS: Tip size available in 3/4 inch or 5/8 inch. DIMENSIONS: The cane length is adjustable from 29 to 38 inches in 1-inch increments. CAPACITY: 250 pounds

Adjustable Aluminum Cane With Stroller Handle

The Adjustable Aluminum Cane with a Stroller Handle is an adjustable cane designed for individuals with mobility disabilities. The Stroller Handle has a wider grip area to spread pressure on the hand for improved comfort. DIMENSIONS: The cane height adjusts from 29 to 38 inches. CAPACITY: 250 pounds.

Adjustable Aluminum Folding Walker (Model 4090)

The Adjustable Aluminum Folding Walker, model 40904, is designed for use by individuals with walking and balance disabilities. The dual button release, which provides added security, folds the walker for transport and storage. The walker has skid-resistant rubber tips. OPTIONS: 3- or 5-inch fixed wheels are available. SIZES: Adult and youth sizes. DIMENSIONS: 1 inch diameter tubing. The adult walker adjusts from 32 inches to 38 inches in height. The youth walker adjusts from 28 inches to 32 i

Adjustable Aluminum Folding Walkers (Models 4081 & 4070)

The Adjustable Aluminum Folding Walkers are designed for use by individuals with walking and balance disabilities. A single button release causes the walker to fold for transport. Both models have durable, skid-resistant rubber tips. OPTIONS: 3- or 5-inch fixed wheels. SIZES: Adukt and youth. DIMENSIONS: Adult walkers can be adjusted from 32 inches to 36 inches. Youth walkers can be adjusted from 28 inches to 32 inches. The walkers fold to 4 inches wide. The model 4081 series have 7/8-inch dia

Adjustable Aluminum Side (Hemi) Folding Walker (Model 4060)

The Adjustable Aluminum Side Folding (Hemi) Walker, model 4060, is designed for use by individuals with one sided weakness such as those having had a stroke. The walker is push-button height-adjustable, has hand grips at two levels, and is equipped equipped with durable, skid-resistant rubber tips. DIMENSIONS: The tubing is 0.75 inch in diameter. Height can be adjusted from 32 inches to 36 inches. CAPACITY: 250 pounds. COLOR: Silver with grey hand grips and tips.

Adjustable Ambulator (Model A-504)

The ADJUSTABLE AMBULATOR, model A-504, is a nonfolding wheeled walker with a seat designed specifically for individuals with a stable balance who are able to stand and take steps by themselves, but lack only endurance in walking. Featuring restraint free ambulation and a chair for shower purposes, this walking aid can be useful for rehabilatation. It also features front casters with brakes; four adjustable height settings from 31.5 - 36 inches; side pockets for carrying personal items; and a saf

Adjustable Back

The Adjustable Back is a molded plastic backshell to fit 16, 18 or 20 inch width wheelchairs. The Back ($238) is two inches narrower than the wheelchair frame to fit between back uprights. It mounts to the wheelchair with an adjustable system which allows three inches of height adjustment and angle adjustment from upright to 15 degrees of recline. Mounting hardware ($266) is available to fit 3/4 inch, 7/8 inch, or 1 inch diameter frame tubing. It is easily removeable from the chair by retracting

Adjustable Bath And Shower Seat

The Adjustable Bath and Shower Seat is a bath seat designed for use by individuals with mobility and balance disabilities. Available with or without a back, the seat can be used in most bathtubs and shower stalls. The unit's seat and the back are plastic with easy-to-grip handles and molded-in areas for hand-held shower spray storage. The aluminum legs are flared to help prevent tipping and have slip-resistant rubber tips. DIMENSIONS (HxDxW): 15.5 x 16.5 x 18 inches without back; 18 x 16.5 x

Adjustable Bath Benches (Models 9010 & 9020)

The Adjustable Bath Benches are bath seats designed for use by individuals with mobility, balance, or cognitive disabilities who have difficulty standing in a tub or shower. Available with or without a molded back, the bench has a plastic seat and back with multiple drainage holes and is equipped with non-skid rubber tips. DIMENSIONS (HxDxW): Seat adjusts from 14 to 20 inches high x 11x 19 inches. CAPACITY: Weight capacity is 300 pounds.

Adjustable Bath Chair (Models B0732, B0740 & B0848)

The Adjustable Bath Chair, models B0732, B0740, and B0848, is a reclining bath seat designed to provide children with lower extremity, mobility or severe physical disabilities with a stable, comfortable seat while bathing. This chair has a frame constructed of PVC tubing and a mesh seat. The top and bottom rails of the frame are padded. The angles of back and leg rests of this bath chair are adjustable, and the chair includes chest and leg safety straps. The mesh is removable for cleaning. OPTIO

Adjustable Bed Rails

The Adjustable Bed Rails are side rails designed to keep individuals with physical disabilities from falling out of bed or individuals with cognitive disabilities from leaving bed without assistance. The rails can also aid the individual in turning in bed. Available singly or in pairs, the rails have three steel tube bars and the base fits between the mattress and box spring or bed frame. The units disassemble to lie flat for transport or storage. DIMENSIONS: The tube rails are one inch in diame

Adjustable Black Finish Aluminum Cane With An Explorer Handle

The Adjustable Black Finish Aluminum Cane is an adjustable cane designed for use by individuals with mobility disabilities. This aluminum cane has a contoured Explorer Handle. DIMENSIONS: The cane height adjusts from 29 to 38 inches. COLOR: Black.

Adjustable Black Finish Aluminum Cane With Devon Handle

The Adjustable Black Finish Aluminum Cane with Devon Handle is an adjustable cane designed for use by individuals with mobility disabilities. The Devon Handle provides a broad weight-bearing surface with one raised end to lessen the possibility of the hand slipping. DIMENSIONS: The cane length is adjustable from 31 to 40 inches in 1-inch increments. CAPACITY: 250 pounds. COLOR: Black.

Adjustable Bracket -- Single, Three, Five, Seven & Nine Holes.

The Adjustable Brackets are wheelchair seating hardware used in many areas such as wheelchair seat construction and wheelchair seat positioning with seat hooks. Made of stainless steel, both ends are rounded. One end is punched with two 17/64 inch x 5/8 inch slots and the other with a selected number of ##10 through holes. They are deburred for a smooth finish. Brackets are available with one, three, five, seven, or nine holes. COLOR: Available in black and stainless steel.

Adjustable Brackets (Models As4000 &as5000)

Adjustable Brackets are multi-hole brackets used in conjunction with seat hooks to enable a variety of seat positioning in wheelchairs. They are made of 11 gauge stainless steel with a 35 degree angle and available with 2, 3 4, 6, or 8 holes. Also available is an 8 hole, 2 inch extra long model. COLOR: Black.

Adjustable Bronze Finish Aluminum Cane With A Statesman Handle

The Adjustable Bronze Finish Aluminum Cane with a Statesman Handle is an adjustable cane designed for use by individuals with mobility disabilities. The Statesman Handle provides finger and thumb positioning. DIMENSIONS: The cane height adjusts from 29 to 38 inches. CAPACITY: 250 pounds. COLOR: Bronze.

Adjustable Canes (Models 3010, 10401055, 1060, 2050, & 2066)

The Adjustable Canes are designed for use by individuals with walking or balance disabilities. Model 3010 is a folding cane and the other models are straight canes. The cane styles include full curved with a foam handle (model 1040), offset curved with a foam handle (model 1055), offset handle with a strap (model 1060), straight with a derby plastic handle (model 2050), an anatomical handle for the right or left hand (models 2066R and 2066L), and a folding cane with a wooden handle (model 301

Adjustable Channel Bracket Mount For Lapboard (Model 08-2000)

Lapboard with adjustable channel, mounts to arm of wheelchair with bracket. 1/4 inch clear acrylic. Sizes: 24 by 24 inches with 15 by 9 inch body cutout, 22 by 22 inches with 13 by 7 1/2 inch body cutout, 20 by 20 inches with 10 by 6 inch body cutout. Modifications and accessories: 3/8 inch acrylic, colored acrylic, 1/4 inch lexan, 1/4 inch ABS, special cutouts, special widths and depths, aluminum rim, plastic rim, communication overlay.

Adjustable Composite Bath & Shower Seat

The Adjustable Composite Bath and Shower Seat is a shower chair/bath seat designed for use by individuals with mobility and balance disabilities. This seat has large, easy-to-grip handles and molded-in storage areas for a hand-held shower spray. The seat is designed for individuals requiring a larger seating area and has S- shaped drainage holes to eliminate graywater pooling. DIMENSIONS (HxDxW): 18.5 x 20 x 25.5 inches. The height adjusts from 18.5 to 23.5 inches in unlimited increments. CAPAC

Adjustable Flashlight Cane

The Adjustable Flashlight Cane is an adjustable straight cane designed for use by individuals with walking or balance disabilities. This cane features a T-shaped wooden handle with a built-in rear flashing light and a height-adjustable aluminum shaft. The cane also has a secret built-in storage compartment. POWER: The flashlight uses two triple-A batteries (not included). DIMENSIONS: The height adjusts from 30 to 39 inches. COLOR: The handle is faux burled walnut and the shaft is available in a

Adjustable Floor Mirror

The Adjustable Floor Mirror is an adjustable magnifying mirror with floor stand designed for use by individuals with low vision or mobility disabilities. Made of chrome-plated metal, this height-adjustable, free-standing mirror can be used while sitting or standing. The glass mirror is a standard mirror on one side and a 4X magnifying mirror on the reverse. A weighted base provides stability. DIMENSIONS: The mirror is 10 inches in diameter and the stand adjusts from 47 to 77 inches high. COLOR:

Adjustable Folding Table (Model 4061)

The Adjustable Folding Table, model 4061, is a height adjustable table designed for individuals who use wheelchairs. Users can either raise or lower the hardwood desktop table to their preferred height with the easel adjustment. And this table, which is latex free, features built-in handles for easy carrying and can be folded flat for convenient storage.

Adjustable Folding Walkers (Models 4000 & 4050)

The Adjustable Folding Walkers models 4000 and 4050 are height adjustable wheeled walkers. The walker frames consist of aluminum tubing, 2 handgrips, cross bars, and sidebars. Model 4000 is made of 1-inch tubing; Model 4050 is made of 7/8-inch tubing. DIMENSIONS: Both walkers have height ranges from 31 to 35 inches.

Adjustable Foot Rest

The Active Foot Rest is a footstool designed for use by individuals with lower extremity and back disabilities. Made of heavy-gauge steel with 3M Safety-Walk slip-resistant material on the extra-wide platform, this footstool features independent height and angle adjustments for optimal positioning. DIMENSIONS: The platform is 22 inches wide.

Adjustable Footrest

Tubular L-bar with adjustable angle footplate, heel loop and ankle strap. Small for 12 and 14 inch chairs, large for 16 and 18 inch chairs.

Adjustable Footstool

The Adjustable Footstool is a footstool designed for use by individuals with lower extremity disabilities. Intended to support proper posture and relieve stress on legs, this height-adjustable footstool allows the user to choose his or her desired level of comfort based on height. The frame is made of wood and the foot platform is covered in faux sheepskin. The unit folds when not in use. DIMENSIONS: 14 x 14 x 18 inches. The height can be set at 17 inches, 14.5 inches, or 11.5 inches.

Adjustable Forearm Crutches

The Adjustable Forearm Crutches are designed for use by individuals with mobility disabilities. Available with standard or anatomical grips, these aluminum crutches are push-button height adjustable and have rubber tips SIZES: Adult (adjusts for individuals between 5 feet 3 inches and 6 feet 2 inches in height) and youth sizes (adjusts for individuals between 4 feet 5 inches and 5 feet 5 inches in height. CAPACITY: 250 or 300 pounds. COLOR: Silver and grey.

Adjustable Four Point Cane With Narrow Bottom (Model 5587) & Wide Bottom (Model 5584)

The Adjustable Four Point Cane with Narrow Bottom, Model 5587 and Adjustable Four Point Cane with Wide Bottom has an aluminum frame and an offset handle with padded grips. DIMENSIONS: Model 5587: Base 8 inches wide, height adjusts from 30 to 36 inches; Model 5584: Base 12 inches wide, height adjusts from 30 to 36 inches.

Adjustable Height And Width Single Operator Adjustable Parallel Bars Floor Mounted (Model 565)

The Adjustable Height and Width Single Operator Adjustable Parallel Bars Floor Mounted, model 565, are manually adjustable parallel bars designed to be a practical alternative to motorized bars. Every height adjustment can be made from a single location and height and width adjustment indicators are permanently stamped on the frame with positive stops prevent over adjustment. The unit is durable and safe with single plunger/locks. DIMENSIONS: Handrail diameter is 1.5 inch; width adjusts 8 feet;

Adjustable Height Channel Bracket Attaching System (Models 31897A & 31901A)

The Adjustable Height Channel Bracket Attaching System is lapboard mounting hardware designed to secure trays to wheelchairs. These heavy-duty steel sliding spacers include all required mounting hardware for attaching to a tray (not included) and enable trays to slide on to the armrests from the front. The fixed braket, model 31897A, may be used with full-size and armrest-style trays and the flip-away bracket, model 31901A, is designed for use with armrest-style trays. The flip-away bracket perm

Adjustable Height Single Operator Adjustable Parallel Bars - Platform Mounted (Model 570)

The Adjustable Height Single Operator Adjustable Parallel Bars - Platform Mounted, model 570, are manually adjustable parallel bars designed to be a practical alternative to motorized bars. Every height adjustment necessary can be made from a single location. The parallel bars are durable, safe and simple to use with the height and width permanently stamped on the frame. They are equipped with single plunger/locks. DIMENSIONS: Height adjusts from 31 to 41 inches; width between handrails is 22.5

Adjustable J Hook Bracket Hardware Seating Package (Package 20Xx)

The Adjustable J Hook Bracket Hardware Seating Package, package 20XX, is seating hardware designed for use on a wheelchair. The Package includes a solid back insert including T-nuts; a solid seat insert including T-nuts; a wide, 1.5-inch offset seat to back hinge; a pair of 1- inch diameter tube two-hole J hooks; a pair of five-hole adjustable L brackets; a pair of 1-inch diameter tube six-hole J hooks; a pair of two-hole adjustable L brackets; a 1-inch diameter tube drop stop; and a 1-inch diam

Adjustable Keyboard Tray

The Adjustable Keyboard Tray is designed for use by individuals with upper extremity and mobility disabilities. This tray is available for standard or ergonomic keyboards and offers a range of adjustments for sitting or standing use, as well as adjustable tilt and optimal mouse positioning for right- or left-handed use. The tray also features gel wrist rests, a sliding mouse tray, smooth undersides, and extra knee clearance. This keyboard tray is also available without a mouse tray.

Adjustable Kinder Chairs

The Adjustable Kinder Chairs are high and low positioning chairs designed for use by children ages one to seven years or up to 49 inches tall with mobility or physical disabilities. Features include a firm back and seat with adjustable seat depth and back angle. Other features includes a removable abductor pad, an adjustable footrest, and an abductor activity tray. The seat height adjusts to allow the child to work or play at a regular table. OPTIONS: Casters are available. DIMENSIONS (HxW): The

Adjustable Overbed Bedside Table

The Adjustable Overbed Bedside Table is designed for individuals who are confined to a bed for a substantial period of time. For instance, those persons with lower extremity disabilities and walking disabilities, or those who sustained a brain injury or individuals recovering from a stroke. Multipurpose table top. Can be used for eating, writing, working/watching movies on your laptop, reading, etc. Top tilts 45 degrees in either direction. Raised rim helps keep items from sliding off. On rollin

Adjustable Parallel Bars (Model Nk 675 & Nk 676)

Adjustable Parallel Bars are parallel bars designed for use in gait training. The standard unit (model NK 675) has 1.5inch diameter rails and a tan hammertone finish. The bars have a "squeeze-neck" height adjusting mechanism for ease of movement. Width between the rails is 26 inches. Model (NK 676) features 1.625-inch diameter stainless steel hand rails with chrome plating on base plates and extension arms. Height adjustment utilizes both a spring loaded plunger locking pin and squeeze tight sec

Adjustable Positioning Chair - Early Intervention (Model Apc100)

The Adjustable Positioning Chair – Early Intervention, model APC100, is a customized positioning seat for designed for use by children with mild, moderate, or severe physical disabilities. The chair adjusts to meet the specific needs of each individual as he/she grows, changes, and develops. The seat is height adjustable within the chair to allow the upper extremities to be positioned comfortably at the cutout on the side frame. The seat is also angle adjustable to create a seat to back angle be

Adjustable Positioning Chair - Preschool / Primary (Model Apc200)

The Adjustable Positioning Chair – Preschool/Primary, model APC200, is a customized positioning seat for designed for use by children with mild, moderate, or severe physical disabilities. The chair adjusts to meet the specific needs of each individual as he/she grows, changes, and develops. The seat is height adjustable within the chair to allow the upper extremities to be positioned comfortably at the cutout on the side frame. The seat is also angle adjustable to create a seat to back angle bet

Adjustable Positioning Chair - Primary / Intermediate (Model Apc300)

The Adjustable Positioning Chair – Primary/Intermediate, model APC300, is a customized positioning seat for designed for use by children with mild, moderate, or severe physical disabilities. The chair adjusts to meet the specific needs of each individual as he/she grows, changes, and develops. The seat is height adjustable within the chair to allow the upper extremities to be positioned comfortably at the cutout on the side frame. The seat is also angle adjustable to create a seat to back angle

Adjustable Proximity Sensor (Sensor Only)

Amdi's Adjustable Proximity Sensor is a sensor switch designed for use by individuals with upper extremity disabilities, neurological disabilities, or severe physical disabilities. This sensor switch features adjustability in sensing range from touch to over half an inch. It can be mounted behind a panel of wood, plastic, vinyl, foam, and many more materials while maintaining its sensitivity functionality. A green light indicates power and a yellow light indicates activation.

Adjustable Rails And Backrest For Toilet

CUSTOM ADAPTATION PURPOSE: To enable individuals with a variety of disabilities to use a toilet. The rails were made from discarded hospital bedheads and mounted to the existing metal wall clamps. The backrest was made from the pad of a telephone table and mounted to a piece of wood connected to two wooden clamps that fit over the rails. A T-nut on either side enables the backrest to slide backward and forward along the rails for adjustment to meet individual needs. A chest strap provides addit

Adjustable Raised Toilet Seat (Model 8300)

The Adjustable Raised Toilet Seat, model 8300, is an elevated toilet seat designed for use by individuals with balance disabilities or lower extremity disabilities who require support transfering toand from the toilet. It attaches securely to the toilet bowel with four five- inch heavy duty support brackets. The brackets have vinyl caps to protect the toilet bowl's porcelain. The seat is equipped with a full splash guard which extends within the toilet basin. DIMENSIONS: The height is adjustable

Adjustable Round Shower Stool

The Adjustable Round Shower Stool is a shower stool designed for use by individuals with mobility and balance disabilities. Designed for use in narrow tubs and places where a regular tub seat does not fit. It is equipped with slip-resistant rubber tips and adjustable aluminum legs are flared to provide a stable base. DIMENSIONS (HxDxW): 15.5 x 13.5 x 13.5 inches. The height adjusts from 15.5 to 20.5 inches in 1-inch increments. CAPACITY: 250 pounds. WEIGHT: 2 pounds 10 ounces.

Adjustable Shower Seat With Arms And Back

The Adjustable Shower Seat with Arms and Back is designed for use by individuals with balance and lower extremity disabilities. The shower seat has removable back and arms and features height-adjustable legs, suction feet, and a built-in hand held shower spray holder. DIMENSIONS: The width between the arms is 17.5 inches and the legs adjust from 16 inches to 21 inches in 1- inch increments. CAPACITY: 300 pounds.

Adjustable Split Solid Seat Insert (Model Ssp80Xx)

The Adjustable Split Solid Seat Insert, model SSP80XX, is a solid seat insert designed for use on wheelchairs. The solid seat insert includes HR foam, T-nuts, and an adjustable split seat, model MOD4900. DIMENSIONS: The foam is 1.5 inches thick.

Adjustable Table And Chair For Child

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To provide a custom adaptation of the Rawson Adjustable Chair and Table for a child with spinal muscular atrophy type II. Made to dimensions to suit each individual client, the Rawson provides seating for children who need to maintain an upright and stable posture. The seat, armrest and table height can be adjusted in 25 millimeter increments so the child can have the optimum position for play, eating and learning activities over several years. For e

Adjustable Tilt In Space Chair (Models Ts13-Lb, Ts13-Hb, Ts15-Lb, Ts15-Hb, Ts17-Lb & Ts17-Hb)

The Adjustable Tilt in Space Chair is a youth positioning chair designed for use by children with mobility or neurological disabilities. The chair adjusts to meet the specific needs of each individual as he/she grows, changes, and develops. It features locking casters; adjustable-height footrests; seat cushion with slight anti-thrust wedge; back pad; adjustable hip and trunk guides; and a seat belt. The chair can be adjusted from fully upright to approximately a 40-degree tilt. The footrest, sea

Adjustable Toilet Safety Rail (Model 521-1804-9601)

The Adjustable Toilet Safety Rail, model 521-1804-9601, is a safety frame and grab bar for toilet designed for use by individuals with balance or mobility disabilities. Constructed of anodized, rust resistant aluminum tubing with plastic molded armrests, the frame attaches securely with basic toilet seat hinge bolts, and provides support for the user when lowering to and rising from the toilet seat. DIMENSIONS: The tubing is 1 inch in diameter.

Adjustable Toilet Safety Rails (Model 8200)

The Adjustable Toilet Safety Rails, model 8200, are an adjustable safety frame designed for use by individuals with balance disabilities or lower extremity disabilities who require support transfering to and from the toilet. The one piece mounting flange attaches securely to the toilet bowel using the bolts used to attach the toilet seat. No tools are necessary for installation. DIMENSIONS: The width between the rails can be adjusted from 20 inches to 24 inches and the height of the rails can

Adjustable Touch Screen Stylus

Adjustable Touch Screen Stylus is designed for use by individuals with fine motor, grasping or neurological disabilities while accessing touch screen surfaces such as smart phones, iPads and Android tablets. The telescopic arm allows users to adjust the length of the stylus. The stylus comes with Velcro straps that allow it to fit any hand and any position. Just adjust the length of the stylus and use on touch screen surfaces including smart phones, iPads and Android tablets. Replaceable tips av

Adjustable Transfer Bench

The Adjustable Transfer Bench is designed for use by individuals with lower extremity, mobility, or balance disabilities. This molded plastic bench adjusts for right- or left-hand tub or shower entry and features height-adjustable legs with suction feet, a removable chair-style back with hand hole, a removable arm, and a built-in handshower holder. DIMENSIONS: The height adjusts from 16 to 21 inches in one-inch increments and the overall width is 30 inches. CAPACITY: 350 pounds. COLOR: White.

Adjustable Transfer Bench (Model 16B903A)

The Adjustable Transfer Bench, model 16B903A, is a transfer bench designed for use by individuals with mobility disabilities or spinal cord injury. The bench features a built-in handheld shower holder and suction feet and it adapts easily for left- or right-hand tubs. DIMENSIONS (HxW): 16 to 21 x 30 inches. CAPACITY: 350 pounds.

Adjustable Wheelchair Clamp

The Adjustable Wheelchair Clamp is designed for individuals who use a wheelchair for mobility. The wheelchair clamp is a multidirectional clamp that can be secured to a wheelchair for positioning of an umbrella or other small item such as a small flag. When not in use the clamp can be folded flush to the back of the wheelchair. DIMENSIONS: Length 50 centimeters. COLOR: Black and silver. WARRANTY/GUARANTEE: As stated by the manufacturer.

Adjustable Wooden Bed Tray (Model Ha-4801)

The Adjustable Wooden Bed Tray, model HA-4801, is a bed tray designed for use by individuals with mobility disabilities. This table has legs that fold out to allow the tray to be placed across the lap. The tray is adjustable to five different angles for reading, writing, and other activities, and it is laminated to allow easy cleaning. DIMENSIONS: 480 x 340 x 20 millimeters. WEIGHT: 1.5 kilograms.

Adjustable-Drop Hardware Kits (Models 32517 & 32518)

Adjustable-Drop Hardware Kits are seating hardware general designed to attach drop seats to wheelchairs. The kits include four J-brackets, four L-brackets, and screws and locking nuts needed to adjust the brackets and to secure the brackets to the Drop Seat (see separate entry). The hardware in the Kits can be raised and lowered to adjust the Drop Seat. DIMENSIONS: Model 32517 fits chairs with 7/8-inch tubes and model 32518 fits chairs with one-inch tubes.

Adl Lap Tray (Model Nc94114)

The ADL Lap Tray, model NC94114, is a lapboard designed to provide writing, eating, and activity space for people who use wheelchairs. The tray's surface is impregnated with melamine, making it waterproof and easy to clean. The tray also features a depressed edge to prevent objects from rolling off, rounded corners, and Velcro straps to secure the tray to the wheelchair. DIMENSIONS: 23.5 x 22 x .25 inches.

Adolescent Transporter

The Adolescent Transporter is an attendant propelled transport wheelchair designed for use with children and adolescents with mobility disabilities. FRAME: The folding, chrome-plated carbon steel frame features a firm, cushioned base to encourage good posture and handle grips for pushing or carrying the stroller. The frame measures 3 x 21 x 11 inches when folded. SEAT (WxHxD): The seat is 17 x 21.5 x 17 inches. UPHOLSTERY: Tan padded embossed vinyl upholstery. ARMRESTS: The fixed sloping, armre

Adolescent Walker (Model Ad-1)

The Adolescent Walker, Model AW-1, is an adjustable walker designed for teens with balance or walking disabilities and other teenagers who need extra stabilization. Features include an adjustable arm reach, adjustable crotch support, padded and removable scissor board, padded balance ring and handle bars. The frame is made of nylon coated steel tubing with a foam and naugahyde sling seat. DIMENSIONS: Patient approximate height requirements are 36 to 56 inches; frame base (LxW) 40 x 33 inches; ba

Adrian's Bus Pass/phone Holder (Model 173)

The Adrian's Bus Pass/Phone Holder, model 173, is a cell phone pouch designed for use by individuals with mobility disabilities or spinal cord injury. It hangs around the neck and keeps necessary items within reach, right in front. This machine-washable denim-shirt-shaped pouch has space for keys, bus pass, cell phone, and/or lunch money. DIMENSIONS: Approximately 5.5 x 5.5 inches at the broadest point; it narrows to 4 inches wide. The neck cord is 22 inches long. COLOR: Available in assorted co

Adt Companion Services Personal Response System

The ADT Companion Services Personal Response System is an emergency alert system with monitoring service designed for use by seniors or individuals with mobility disabilities, severe physical disabilities, or spinal cord injury. This monitoring system includes a base unit and one personal help button. The personal help button is waterproof and comes in one of three styles (wristband, pendant, or stationary button). It provides wireless two-way voice intercom at up to 300 feet from the base unit.

Adult Adjustable Standing Table (Model 315)

The Adult Adjustable Standing Table, model 315, is fully adjustable. The padded knee and buttocks support adjustable in height support all weight bearing parts comfortably. The unit also offers three body thickness adjustments, two body width adjustments at the hip and Velcro ankle straps mounted on the adjustable foot alignment rail. The table also adjusts to various depths. DIMENSIONS: cut out size 10 x 26 inches, top and base 30 x 30 inches, top height from floor 34 x 53 inches.

Adult Dual Paddle Extra-Wide Walker

The Adult Dual Paddle Extra-Wide Walker is a folding adjustable walker designed for use by individuals with walking disabilities who need additional weight capacity and width between the handgrips. The Ergonomic Paddle can be depressed with the palm for folding and unfolding of the walker. The handles "lock-in" when the walker is opened. This walker folds flat for compact storage. OPTIONS: Walker wheel and glide accessories are available. DIMENSION (HxDxW): 30 x 17 x 22 inches. The height adjust

Adult Folding Parallel Bars (Models 597W-7, 597W-10, 597S-7 & 597S-10)

The Adult Folding Parallel Bars, models 597W-7, 597W-10, 597S-7 and 597S-10, are designed for use by adults with balance, lower extremity, mobility or walking disabilities. The W models feature a wood base that comes with one stabilizing bar, and the S models have a steel base unit with two stabilizing bars to lock parallel bars in open position. They are both sturdy and stable. To store the parallel bars, unlock and slide until handrails are nearly touching. DIMENSIONS: The bars have a 42 inch

Adult Handcycle By Palmer

The Adult Handcycle by Palmer is a three-wheeled, hand propelled cycle designed for use by adults with arthritis or mobility, balance, or neurological disabilities. This cycle is designed for wheelchair users as a means of recreation or alternative mobility, and others who wish to exercise the upper torso. Features include ease of entry/exit, a low center of gravity, a choice of in-line or opposed cranking, three-speed coaster brake, parking brake, adjustable seat, and a large rear basket. OPT

Adult Head Float

The Adult Head Float is a float swimming aid designed for use by individuals with neurological or upper extremity disabilities. This device is useful for a swimmer with under-developed reflexes and minimal head and limb control. This float rests on the user's shoulders and wraps around the neck, holding the head above water. CAPACITY: 50 to 175 pounds.

Adult Hi-Waist Pant (Model 106)

The Adult Hi-Waist Pant, model 106, are men's trousers or women's slacks designed for use by wheelchair users. These cotton pants are cut higher in the back for people who use wheelchairs. Features include a full elastic waist, flat seams, belt loops, a roomier seat, and a fake fly. SIZES: 28, 30, 32, 34, 36, or 38. COLOR: Black or navy.

Adult Revolution Pro Comp & Junior Revolution Pro Comp

The Adult Revolution Pro Comp and Junior Revolution Pro Comp are mono skis / sit skis designed for use by individuals with lower extremity disabilities or spinal cord injury. This mono ski has a flexible, form-fit polymer seat with a high or low back, mounted on a frame constructed of chrome moly steel, with an internal valving suspension. The retention system includes foot, knee, and thigh retention straps; waist and chest straps; a safety/retention strap; and a three-point evacuation system. T

Adult Standard Forearm Crutch

The Adult Standard Forearm Crutch is a forearm crutch designed for use by for individuals with walking disabilities. The crutch is designed for long-term use and has an orthopedic handle for user comfort. The forearm cuffs are vinyl coated. Adjustments to the handgrip and cuff heights can be made independently. DIMENSIONS: The crutch height can be adjusted from 30 to 37 inches in 1-inch increments.

Adult Walker (Model Aw-1)

The Adult Walker, Model AW-1, is an adjustable walker designed for adults with balance and walking disabilities and others who need extra stabilization. Features include an adjustable arm reach, adjustable crotch support, padded and removable scissor board, padded balance ring and handle bars. The frame is made of nylon coated steel tubing with foam and naugahyde sling seat. DIMENSIONS: Patient approximate height requirements are 48 to 68 inches; frame base (LxW) 47 x 35 inches; balance ring hei

Adult Wheelchair Tray (Model 766)

The Adult Wheelchair Tray, model 766, is an adjustable lapboard designed to fit all size wheelchairs. The top is mar-resistant wood grain laminate and has rims on three side. DIMENSIONS: 23 1/2 inches wide x 21 1/2 deep x 1/2 inch thick, cut out size 14 1/2 x 8 3/4 inches, rims 1/2 inch high.

Advantage Arm Keyboard Support Mechanism

The Advantage Arm Keyboard Support Mechanism is a keyboard tray support arm designed for use in wheelchair accessible computer workstations. The unit features an extended, fully adjustable spring-assisted arm with a lock/release mechanism. The spring-assist feature offsets keyboard weight. The unit is fully retractable. A closed fist can be used to lock and unlock a single, large, horizontal lever on the front of the unit for setting height and tilt position. To adjust the keyboard tray, the use

Advantage Comfort Male Urinal System

The Advantage Comfort Male Urinal System is a urinal with collection bag designed for use by individuals with mobility disabilities, severe physical disabilities, or spinal cord injury. The system includes a plastic urinal with a drainage tube leading to a two-liter collection bag. It can be used in a bed or wheelchair. A foam ring around the opening of the urinal provides comfort when the urinal is positioned and reduces the risk of skin breakdown associated with a urinal that is left in place

Advantage Female Urinal System

The Advantage Female Urinal System is a urinal with collection bag designed for use by women with severe physical disabilities or spinal cord injury. The system includes a plastic urinal with a drainage tube leading to a two-liter collection bag. A foam ring around the opening of the urinal is shaped to fit female anatomy and provide comfort. The foam is made of closed-cell, non-absorbent polyethylene. This system can be used in a bed or wheelchair. Urine rapidly drains from the urinal, through

Advantage Standard Male Urinal System

The Advantage Standard Male Urinal System is a urinal with collection bag designed for use by individuals with severe physical disabilities or spinal cord injury. The system includes a plastic urinal with a drainage tube leading to a 2-liter collection bag. Urine rapidly drains from the urinal, through the tube, into the collection bag, leaving the urinal empty and ready for the next use. This allows the user to have access to an empty urinal without having to get out of bed, reducing the risk o

Advantage-Rail System

The Advantage-Rail System is a standing transfer aid designed for use by individuals with mobility and balance disabilities. Intended for use beside the bed, toilet, or bathtub, the unit consists of a height-adjustable support rail with a padded horizontal handle and a floor plate. The rail fits in the low-profile floor plate with a push-down-and-turn motion, allowing the rail to be used in multiple locations. With a gentle lift, the handle pivots with the user to assist in taking small steps fo

Adventure

Adventure is an powered wheelchair designed for indoor or outdoor use by individuals with mobility disabilities or spinal cord injury. This fully modular wheelchair can climb curbs up to 3 inches high, or up to 5 inches with the optional curb climber. The parts were designed for use outdoors, including in damp meadows or light rain. The unit can climb an 18 percent incline with a 308 pound load. FRAME (HxLxW): 38 x 43 x 26.5 inches (including footrest). The chassis is 17 inches high x 36 inches

Adventurer 2000 Bike

The Adventurer Bike is an adult tricycle designed to be ridden by individuals ages 14 and older with balance and severe physical disabilities. This tricycle provides stability with adaptable components that allow for multiple adjustments as well as portability. Adjustable features include rear steering to enable a caregiver to steer and brake, telescoping handlebars, bottom bracket and crank, locking hand brake, non-slip seat with seatbelt, and a neoprene footplate and pully. DIMENSIONS: The cyc

Aeon Labs Z-Wave Wireless Remote

The Aeon Labs Z-Wave Wireless Remote can be used to control up to eight different devices. It can either be used in place of a home controller, in a situation where only a few simple z-wave devices are in use, or as an additional controller for local devices. Four buttons are visible on the control with a further four hidden by a slide cover.

Aero Access

Aero Access is a public transport van designed for use by individuals with mobility disabilities or spinal cord injury. The van has a folding ramp at entry and space for up to eight wheelchairs. Other features include a Freightliner FB 65 chassis; Cummings ISB 5.9 liter diesel engine; Allison Model 2000 transmission; front wheel drive; Double Cardan steering joint; tilt hood/fender for easy engine access; independent, rear air suspension; welded steel uni-frame construction; 60 gallon fuel capac

Aerodyne Pt 1100

The AeroDyne PT 1100 is an alternating air pressure mattress surface designed to prevent pressure sores for people with lower extremity, mobility, or severe physical disabilities or spinal cord injury. This alternating pressure mattress system delivers pressure relief with 288 cycle changes per day. The pressure monitoring system uses pressure sensors, which monitor the user's movement and adjusts air pressure within the mattress to ensure maximum pressure relief. WARRANTY: One year warranty.

Aeroflow Ii Wheelchair Pad (Model Msc061005)

The Aeroflow II Wheelchair Pad, model MSC061005, is an air flotation wheelchair cushion designed for use by individuals with mobility disabilities or spinal cord injury. The pad is made of durable 16-gauge antimicrobial vinyl and is latex-free. DIMENSIONS (LxW): 16 x 18 inches.

Aerogarden 3

The AeroGarden 3 is a raised bed container gardening system designed for use by individuals with mobility, lower extremity, or neurological disabilities, arthritis or spinal cord injury. Smaller than the original AeroGarden, this compact system sits on a counter or table and grows lettuce, tomatoes, herbs, or flowers year round. The Aerogarden uses aeroponics, creating a controlled environmental chamber in which plant roots grow in humid, rainforest-like air instead of soil. The user drops in th

Aerogarden 7

The AeroGarden 7 is a raised bed container gardening system designed for use by individuals with mobility, lower extremity, or neurological disabilities or arthritis or spinal cord injury. This system sits on a counter or table and grows lettuce, cherry tomatoes, peppers, herbs, or flowers year round. The Aerogarden uses aeroponics, creating a controlled environmental chamber in which plant roots grow in humid, rainforest-like air instead of soil. The user drops in the seven dirt-free, pre-seede

Aerogarden Extra

The AeroGarden Extra is a raised bed container gardening system designed for use by individuals with mobility, lower extremity, or neurological disabilities or arthritis or spinal cord injury. This system sits on a counter or table and can be used to grow lettuce, tomatoes, herbs, or flowers year round. The Aerogarden uses aeroponics, creating a controlled environmental chamber in which plant roots grow in humid, rainforest-like air instead of soil. The user drops in the dirt-free, pre-seeded Bi

Aerogarden Extra Elite

The AeroGarden Extra Elite is a raised bed container gardening system designed for use by individuals with mobility, lower extremity, or neurological disabilities or arthritis or spinal cord injury. This system sits on a counter or table and grows lettuce, tomatoes, herbs, or flowers year round. The Aerogarden uses aeroponics, creating a controlled environmental chamber in which plant roots grow in humid, rainforest-like air instead of soil. The user drops in the dirt-free, pre-seeded Bio-Dome p

Aerogarden Ultra

The AeroGarden Ultra is a raised bed container gardening system designed for use by individuals with mobility, lower extremity, or neurological disabilities or arthritis or spinal cord injury. This system sits on a counter or table and grows vegetables, herbs, or flowers year round. The AeroGarden Ultra features the MyGarden control panel, an automated garden "brain" that makes gardening easier for beginners and offers complete customization for experts. It also includes a redesigned lighting sy

Afikim Afiscooter S 4-Wheel Scooter

The Afikim Afiscooter S 4-Wheel Scooter is designed for individuals with limited mobility due to cardiovascular, orthopedic or neurological conditions. It can be used both indoors and outdoors. It has a stable four-wheel design and high ground clearance combination to create a smooth ride wherever you go. The full front and rear suspension, shock absorbers, and energy absorbing bumpers all combine to make a smooth riding experience. It has a top speed of 9.30 miles per hour.

Aft Axle Fuel Tank For Ford E-Vans With Wheelchair Access (Model 080-01-10122)

The Aft Axle Fuel Tank for Ford E-Vans With Wheelchair Access, model 080-01-10122, is a fuel tank for van conversion designed for use by makers of vehicles for individuals with mobility disabilities or spinal cord injury. This system includes a 30-gallon aft of axle fuel tank to replace the original midship fuel tank in Ford E-Vans converted for wheelchair access. The system is designed for use in dropped floor conversions of 1997 through 2004 Ford E-250 and E-350 vans. This fuel tank is made fr

Afterburner Wheel Chair Pusher

The Afterburner Wheel Chair Pusher is a cycle attachment for the wheelchair designed to transport a person in a wheelchair without having to transfer her or him from the wheelchair, and to provide outdoor entertainment for individuals who use a wheelchair. The back portion of the Afterburner looks like a normal bicycle with a rear wheel, seat and pedals; however there is no front wheel or handle bars. The front of the device is designed to attach to the back of a wheelchair (included). The After

Agility Plus

Agility Plus is a legrest designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. This articulating, swing-away legrest come in a choice of mechanical elevation or independent power elevation and is springloaded, removable, and compact.

Air Duct Kitchen Accessories

Air Duct Kitchen Accessories are adjustable kitchen components designed for use by individuals with upper extremity or mobility disabilities.This shelf-mounted unit stores a variety of items with in reach in otherwise unused space. When not in use, the unit retacts into the cabinet.

Air Free Danube Scooter Tire

The Air Free Danube Scooter Tire is a polyurethane tire designed for use as a replacement tire for electric scooters and runabouts. This airless tire requires a split hub and fits all manufacturers' caster-type wheels requiring an 8x1 tire. Its PSI equivalency rating is 50 pounds per square inch. DIMENSIONS: 8 inches in diameter, 1 inch wide.

Air Free Fraser Scooter Tire

The Air Free Fraser Scooter Tire is a polyurethane tire designed for use as a replacement tire for scooters. This airless tire requires a split hub and fits all manufacturers' caster-type wheels requiring an 8 x 1.5-inch tire. Its PSI equivalency rating is 50 pounds per square inch. DIMENSIONS: 8 inches in diameter x 1.5 inches wide.

Air Free Linville Wheelchair / Scooter Tire

The Air Free Linville Wheelchair and Scooter Tire is a polyurethane tire designed for use as a replacement tire for wheelchairs and electric scooters. This airless tire has a saw tooth tread pattern which is non-marking but can traverse severe terrain. The tire fits any manufacturer's model requiring a 410/350-4 type tire on a split rim hub. Its PSI equivalency rating is 50 pounds per square inch. DIMENSIONS: 10.5 inches in diameter x 3 inches wide. WARRANTY: Lifetime warranty against structural

Air Free Onega Hd Scooter Tire

The Air Free Onega HD Scooter Tire is a polyurethane tire designed for use as a replacement tire for electric scooters. For use where a more rugged tire is needed, this airless tire fits most manufacturers who use a two-piece hub that takes a 9/3.50-4 tire. Its PSI equivalency rating of 80 pounds per square inch. DIMENSIONS: 9 inches in diameter x 3.5 inches wide.

Air Free Onega Scooter Tire

The Air Free Onega Scooter Tire is a polyurethane tire designed for use as a replacement tire for electric scooters. This airless tire fits most manufacturers who use a two-piece hub that takes a 9/3.50-4 tire. This tire has a PSI equivalency rating of 50 pounds per square inch. DIMENSIONS: 9 inches in diameter x 3.5 inches wide.

Air Free Pyramid Tire, The

The Air Free Pyramid Tire is a replacement wheelchair tire designed for use by wheelchair users. This lightweight tire is designed to be used on low profile rims. This tire has a smooth, non-marking tread pattern. DIMENSIONS: 24 x 1 inches. COLOR: Available in a variety of colors.

Air Free Trinity Scooter Tire

The Air Free Trinity Scooter Tire is a polyurethane tire designed for use as a replacement tire for scooters. This airless tire fits all manufacturers' split rim hubs that require a 250-4 type tire, also known as a 9 x 2.8. It also fits hubs requiring a 280-4 or 280/250-4 tire. It has a smooth tread and a PSI equivalency rating of 40 pounds per square inch. DIMENSIONS: 9 inches in diameter x 2.8 inches wide.

Air Free Volga Scooter Tire

The Air Free Volga Scooter Tire is a polyurethane tire designed for use as a replacement tire for scooters. This airless tire requires a split hub and fits all manufacturers' caster-type wheels requiring an 8 x 1.25-inch tire. This tire has a PSI equivalency rating of 40 pounds per square inch. DIMENSIONS: 8 inches in diameter x 1.25 inches wide.

Air Guitar Hero

PROTOTYPEPURPOSE: To develop a muscle-computer interface to play the "air" Guitar Hero video game. Researchers at Microsoft Research along with PhD student Scott Samponas have developed a muscle-computer interface that allows individuals with grasping disabilities to control devices without the use of the hands. TITLE: Microsoft researchers build muscle-computer interface, play air Guitar Hero. AUTHOR: Donald Melanson. WEBSITE: Engadget.com. REF: http://www.engadget.com/2009/10/27/microsoft-rese

Air Support

The Air Support is a bariatric air mattress designed for use by individuals who are at risk for pressure sores/ulcers and are obese. The mattress operates in alternating or static low-air Loss modes. The alternating mode features one-in-three alternation. The quilted top cover is waterproof, vapor permeable, and machine washable. The mattress features twenty reinforced inflatable cells. The mattress deflates quickly for CPR function and the mattress system is completely replaceable. Digital tech

Air+Chair

The Air+Chair Onboard Transit Chair is a transfer wheelchair for onboard an airplane designed for use by individuals with lower extremity, mobility, and neurological disabilities, or spinal cord injury. This wheelchair is designed to fit narrow aisles and confined spaces for use in boarding aircraft. FRAME (HxLxW): 34 x 35.25 x 16.75 inches; when folded (HxDxW) 23.35 x 23.25 x 9.25 inches. It has a light gray solid welded frame with handles extending from the back. SEAT: Adjustable padded seat a

Aircraft Aluminum Wheelchair

The Aircraft Aluminum Wheelchair is a basketball wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Made of rigid 6000 Series aircraft-grade aluminum and heat treated after welding. Available frame colors are deep green, Porsche red, mother of pearl, lapis blue, teal metallic, chrome yellow, or lime green. Impact guards are optional. Custom modifications are available. SEAT (LxW): 14 to 18 x 13 to 18 inches. The distance from the floor to the sea

Airex Balance Pad

The Airex Balance Pad is a balance training device designed for use by individuals with balance or neurological disabilities. The destabilizing properties of the soft foam create a wobbling effect for a variety of balance activities. The mats can be stacked or used with therapy mats to vary the effect. DIMENSIONS: 20 x 16.5 x 2.5 inches. WEIGHT: 1.6 pounds.

Airfree 24 & Airfree 20

Airfree tubes for pneumatic wheelchair tires. Endurothane II pneumatic tube construction for use with conventional pneumatic rubber wheelchair tires. AIRFREE 24 has flex lock feature to snugly fit the rim seat securing spoke nipples. AIRFREE 20 has elliptical flex support for power wheelchairs. Lifetime guarantee against flats, blowouts and pressure loss. Can improve maneuverability and reduces tire wear. AF241375 fits most major brands; 24 by 1 3/8 inches. AF24125 fits most 24 by 1 1/4 inch tir

Airlite Pro

AirLite Pro is a lightweight manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Total length is 32.25 inches for 75-degree frame and 30 inches for 90-degree frame. The total width is seat width plus 8.75 inches with 3-degree camber. The frame is made of aluminum with carbon fiber camber tube. The aluminum is double-butted (twice as thick) where tubes connect. Options include suspension and Vario-Ax Multi Positional camber tube with 1-, 3-,

Airman Compact Air Pump

The Airman Compact Air Pump is a powered ball and tire pump designed for use to inflate wheelchair tires. This compact high-pressure air compressor quickly inflates pneumatic wheelchair tires and can be used to inflate sports balls. The unit has a built-in pressure gauge and comes with a ball adapter, balloon adapter, and owner's manual. POWER: Uses 12-volt car cigarette lighter adapter (included). DIMENSIONS: Adapter cable is 3.4 meters.

Airpulse Pk

The Airpulse PK is an alternating pressure air flotation wheelchair cushion system designed for use by individuals who currently have or who are at high risk for pressure sores. Alternate air cells are automatically inflated/deflated to the desired firmness on an adjustable timed cycle. This action is designed to change pressure contact points and stimulate circulation to the compressed tissue. The cushion system includes cushion, cushion cover, controller, controller cover and battery charger.

Aislemaster Boarding Transfer Chair (Models 8000 & 8010)

The AisleMaster Boarding Transfer Chair, models 8000 and 8010, is a transfer wheelchair for onboard an airplane designed for use by individuals with lower extremity, mobility, and neurological disabilities, or spinal cord injury. This wheelchair is designed to fit narrow aisles and confined spaces for use in boarding aircraft. Model 8000 fits jet aircraft and model 8010 fits commuter aircraft. FRAME (HxLxW): Model 8000 is 48 x 32 x 16 inches and model 8010 is 48 x 32 x 13 inches. Both models hav

Aislemaster Folding (Model 8020)

The AisleMaster Folding, model 8020, is an emergency evacuation carrier and transfer wheelchair for onboard an airplane designed for use by individuals with lower extremity, mobility, or neurological disabilities, or spinal cord injury. This wheelchair has a slender width and front-and-rear telescoping lifting handles to allow passage through narrow doorways, confined aisles, and stairways. FRAME (HxLxW): 47 x 32 x 16 inches; when folded (HxDxW) 147 x 17 x 16 inches. The frame is yellow. SEAT:

Aktiv X8 Pediatric Tilt n Space Wheelchair

The Aktiv X8 Pediatric Tilt n Space Wheelchair is a multi-positional wheelchair designed for use by children with limited mobility as a result of cerebral palsy, stroke or muscular dystrophy. It is suitable for full-time use. This wheelchair has a folding frame and tilt feature. In addition, it is fitted with elevating leg rests and a multi adjustable headrest as standard. This wheelchair can even be disassembled for transportation in a vehicle if required. The seat width and depth can be adjust

Alarm Tender

Alarm Tender is a smoke alarm access bracket designed for use by individuals with balance, mobility, or upper or lower extremity disabilities, spinal cord injury, or short stature. This sliding two-part vertical device enables an individual to slide a smoke alarm (not included) mounted to it within reach for tasks such as silencing nuisance alarms, changing the battery, cleaning, performing fire drills, etc. The device attaches to the wall with screws or peel-and-stick tape (included). A small

Albacmat Rescue Mat

The AlbacMat Rescue Mat is an emergency evacuation system designed for use with individuals with mobility disabilities or spinal cord injury. Made of a polypropylene board covered by a lightweight canvas material, the unit has a handle above the user's head, a handle below the user's feet, and three handles on each side. It has two safety straps at the torso and the shins to secure the user to the mat, and a pocket at the bottom in which the user places his or her feet. The straps and handles ar

Albacmat With Thermal Cover

The AlbacMat with Thermal Cover is an emergency evacuation system designed for use with large individuals with mobility disabilities or spinal cord injury. Made of a polypropylene board covered by a lightweight canvas material, the unit has a handle above the user's head, a handle below the user's feet, and three handles on each side. It has three safety straps at the torso, hips and shins to secure the user to the mat, and a pocket at the bottom in which the user places his or her feet. The str

Alert Light

The Alert Light is a safety flag designed for use with manual wheelchairs, power wheelchairs or scooters. It is intended to improve the visibility of the wheelchair or scooter during the day or night. The Alert Light consists of a pennant-shaped flag has a folding shaft that enables the flag to fold below the user's head when entering and exiting vehicles or when not in use. The upper portion of the shaft has a light emitting diode (LED) light that can be set as an orange glow or a flashing str

Alertusa

AlertUSA is an emergency alert system with monitoring service designed for use by seniors or individuals with balance, mobility, or severe physical disabilities or spinal cord injury. This personal emergency response system (PERS) has two components: a portable, water-proof help button (transmitter), which the user wears or carries, and a receiver unit connected to the user's existing telephone line. If the user experiences a fall or other medical emergency or other type of emergency, he or she

Alicia Prone Stander (Models Aps1, Aps2, & Aps3)

The Alicia Prone Stander is a prone stander designed for use by children with lower extremity, neurological, or walking disabilities. The basic stander includes four lateral supports, two 2-inch straps, contoured knee supports, shoe holders, tray, and locking casters. The tray is height- and angle- adjustable. The stander angle adjusts from 90 to 60 degrees. OPTIONS: Posterior pelvic support gate, back support extension, back/head support extension, and inset activity box. SIZES: Small (model AP

Alimed E-Z Release Seat Belt With Alarm

The AliMed E-Z Release Seat Belt with Alarm is a wandering patient system designed for use by individuals with Alzheimer's disease or other cognitive disabilities who are at risk for falls in homes or hospitals. This seatbelt is equipped with a standard sensor unit (included) and a hook and loop fastening buckle that, once disengaged, alerts a caregiver or hospital staff that a person is about to wander or risks a fall. The sensor alarm can be attached to regular chairs, geri chairs, wheelchair

Alimed Inflatable Lap Buddy (Model 77338)

The AliMed Inflatable Lap Buddy, model 77338, is a wheelchair lap board, positioning pad and wandering patient system designed to prevent wheelchair users with Alzheimer's disease or cognitive disabilities and balance or lower extremity disabilities from rising without assistance. It provides upper body support and posture assistance as well as a comfortable forearm and wrist/hand rest. The Inflatable Lap Buddy can support light activity, such as reading. It inflates quickly with a hand inflator

Alimed Sit-Straight Basic Cushion

The Sit-Straight Basic Cushion is a high density foam seat cushion with a convex base designed for use in wheelchairs with sling seats. Intended to improve sitting posture and weight distribution, this cushion is a combination of the Solid Seat Insert (see separate entry) and a wedge cushion. The wedge is intended to encourage modified anterior pelvic tilt. A No-Slip waterproof cover with front zipper is standard with the cushion, and protects against liquid infiltration. Attached straps secure

Alimed Standard Multiboot (Models 62836, 69620, 61002, 62744, 62719, 63145, & 62206)

The AliMed Standard MultiBoot is boot orthosis and foot protector designed for use with individuals with lower extremity disabilities. The backbone of the MultiBoot features a swing-out antirotation bar and a height-adjustable footplate to prevent bedding from pressing on the toes and feet. Locking slots are mated to the antirotation bar to prevent shifting. The foot is swaddled in a soft Kodel-type Velcro-closure sock attatched to the MultiBoot backbone to hold the foot without irritation. The

All Purpose Narrow Base Quad Cane (Model 6825)

Narrow based adjustable height 4 legged cane with straight shaft shovel type handle. Rubber safety tips. Base is 7 by 8 1/2 inches. Height adjustment is a double locking clamp. Adjustable height from 29 to 38 inches.

All Purpose Voting Booth (Model Vb-Dapb)

The All Purpose Voting Booth, model VB-DAPB, is an accessible voting booth that can be used for voters with lower extremity or mobility disabilities or spinal cord injury. The adjustable height booth can be used by voters who are standing or seated. The writing surface can be raised for standing voters or lowered for sitting voters, including those seated in a wheelchair. The booth is collapsible for storage. It has aluminum legs and comes with a curtain for privacy. OPTIONS: Replacement curtain

All Star Cushion (Models Sc3030 & Sc3031)

The All Star Cushion, models SC3030 and SC3031, is a foam seat cushion designed for use by active wheelchair users who require mild to moderate lateral stability and mild to moderate pelvic and leg support. The cushion is made with layers of high resiliency polyurethane and visco foam. An internal anti-thrust shelf and lateral wedges create pelvic stability which discourages sacral sitting and relieves pressure from the ischial areas. The cushion comes standard with exterior and interior incont

All Terrain Chair (Model Atc 100)

The All Terrain Chair, model ATC 100, is a beach wheelchair designed for use by individuals with mobility disabilities. FRAME (LxW): 36 x 31 inches. The white PVC tubular frame disassembles for storage and transport. All hardware is stainless steel. SEAT (WxDxH): 18 x 18 x 24 inches. A seatbelt is included. A fixed backrest is standard; a reclining backrest is optional. CUSHION: An optional cushion set is available. UPHOLSTERY: Mesh sling upholstery. ARMRESTS: Swing-away armrests are standard.

All Terrain Chair (Model Atc 200)

The All Terrain Chair, model ATC 200, is a beach wheelchair designed for use by children with mobility disabilities. FRAME: The white PVC tubular frame disassembles for storage and transport. All hardware is stainless steel. SEAT: A seatbelt is included. A fixed seat back is standard; a reclining back is available. CUSHION: An optional cushion set is available. UPHOLSTERY: Mesh sling upholstery. ARMRESTS: Swing-away armrests are standard. BRAKES: Hand operated wheel locks. WHEELS: Four wheels wi

All Terrain Conversions

All-Terrain Conversions (ATC) specializes in converting trucks and SUVs into wheelchair accessible vehicles using their patented lift system. Their vehicles offer a solution for those with spinal cord injuries or other illnesses that limit their mobility.

All Terrain Walkaroos

These All Terrain Walkeroos are designed for individuals who use walkers to get around. The Walkaroos are supportive tips for walkers. They glide and move smoothly across carpet and floors while offering stability. Easy to install: remove old cap, put Walkaroo on and twist in place to secure. Comes in sets of 2. Designed not to catch on or mark flooring. Made of high density polyethylene. Non-porous material decreases chance of spreading harmful germs. Comes in a set of 2.

All Terrain Walker

---- PROTOTYPE --------- PURPOSE: To design a walker that can be used to travel more efficiently on all terrains for an adolescent girl with cerebral palsy. An Otto Bock Busy Bee frame was modified by adding large front wheels, swivel rear wheels with shock absorption, an additional frame member for stability, and padded handlebar grips. These modifications yield a responsive and stable all-terrain walker that allows the user to travel on rough surfaces such as trails and grass, as well as on pa

Allegro

The Allegro is a lightweight child or adult wheelchair designed to address a variety of positioning needs for people with mobility disabilities. FRAME: Folding modular crossbrace frame for growth capability in a choice of colors is standard. A rigid frame and a frame without seat rails are available. SEAT: The seat depth and back angle are adjustable to permit the acceptance of a variety of seating systems. An adjustable-height back, upholstered back canes, and fixed-height back canes for posit

Alphabet And Number Caps

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Caps can be used in activities to help children learn to recognize letters and numbers.

Alternate Entrance (With Handicap Access Symbol And Arrow) Suction Cup Sign (Model 2072)

The Alternate Entrance (with Handicap Access Symbol & Arrow) Suction Cup Sign, model 2072, is a bilingual (English-Spanish) access sign designed for use to indicate a wheelchair access route for individuals with mobility disabilities or spinal cord injury. The sign has the words "Alternate Entrance" and "Entrance Alternitiva" under circles containing a right arrow and the International Access Symbol, a stylized drawing of a figure seated in a wheelchair. The sign comes with 3 suction cups i

Alternate Entrance With Symbol And Arrow Sign (Model 2014)

The Alternate Entrance with Symbol & Arrow Sign, model 2014, is a bilingual (English-Spanish) access ssign designed to indicate a wheelchair accessible entrance for individuals with mobility disabilities or spinal cord injury. The sign has the words "Alternate Entrance" (in English) and "Entrada Alternativa" (in Spanish) below two circles. The circle on the left contains the International Access Symbol, a stylized drawing of a figure seated in a wheelchair, and the circle on the right contai

Alternately-Propelled Mechanical Wheelchair

Alternately-Propelled Mechanical Wheelchair (APMW) is a modified wheelchair that incorporates a superior braking system and eliminates complete hand-to-rail contact when moving forward. By incorporating a clutch system engaged by air cylinders, the user can apply a relatively small amount of force to travel further than a traditional wheelchair. The APMW is designed for a range of users, including children of eight years and older, people of diminished upper body capacity, and individuals seeki

Alternative Door Opener (Ado)

DO IT YOURSELF ENTRY PURPOSE: To assist individuals with upper extremity and mobility disabilities in activating a large-button powered door operator. Resembling a baton, this device is made from a wooden cylinder with a section cut from a bicycle handlebar grip covering the end used to push the activator button. The ADO is attached to the side of the door operator pad/button using Velcro. DIMENSIONS: 12 inches long x 0.75 inch in diameter. SKILLS REQUIRED: Basic shop skills with a table saw.

Alumilite Folding Curb Ramp

The Alumilite Folding Curb Ramp is a portable ramp designed to provide access over curbs or steps or in and out of vans for wheelchair users. The ramp folds in half for carrying and comes with a handle and closing strap. The ramp is made of welded aluminum with a permanent non-skid surface that is integral to the aluminum and cannot tear or wear off. DIMENSIONS (LxW): 3, 4, 5, or 6 feet x 29 or 36 inches (open) and 15 or 18 inches (closed). WEIGHT: 18 to 41 pounds depending on size. CAPACITY: 60

Alumilite Solid Curb Ramp

The Alumilite Solid Curb Ramp is a curb ramp designed to provide access over curbs or steps for wheelchair users. The ramp features welded aluminum construction with a permanent non-skid surface that is integral to the aluminum and cannot tear or wear off. The ramp can be used as a short fixed ramp or for temporary purposes. DIMENSIONS (LxW): 3, 4, 5, or 6 feet x 30 or 36 inches. WEIGHT: 18 to 41 pounds depending on size. CAPACITY: 600 pounds.

Aluminium Threshold Ramp

The Aluminum Threshold Ramp is a threshold ramp designed for use by individuals who use wheelchairs or scooters. The ramp is manufactured of anodized aluminum and trimmed at the edges with a coarse finish strip to prevent the risk of slippage. The treads are slotted to facilitate drainage and stop the build up of ice. It is also transportable in the back of a car. DIMENSIONS: 2 or 3 feet long.

Aluminium Transport 19 Inch Wheelchair (Model 1745)

The Aluminum Transport 19 Inch Wheelchair, model 1745, is a lightweight transport wheelchair designed for use by individuals with mobility disabilities. FRAME: Aluminum frame with push handles that fold down for storage and transport. SEAT: The seat is 19 inches wide and is equipped with a seat belt. UPHOLSTERY: Available in silver, blue, or green. BRAKES: Wheel locks. FOOTRESTS: Swing-away footrests. CAPACITY: 300 pounds. WARRANTY: Can be returned for exchange, credit, or refund within 90 days.

Aluminum 3-In-1 Commode (Model B4000)

The Aluminum 3-in-1 Commode, model B4000, is a height-adjustable commode and safety frame designed for use by individuals with mobility disabilities. This free-standing commode features a height-adjustable anodized aluminum frame, vinyl handgrips, toilet seat, and a bucket with lid and splash guard. With the bucket removed, the unit can be used over a toilet as a safety frame and elevated toilet seat. OPTIONS: Replacement tips, bucket with lid, and splash guard. DIMENSIONS (HxWxD): 19 to 23 inch

Aluminum Adjustable Crutch (Model 5578), Child's Aluminum Adjustable Crutch (Model 5579)

Aluminum Adjustable Crutch, Model 5578 and Child's Aluminum Adjustable Crutch, Model 5579. DIMENSIONS: Adult size: height adjusts 42 to 60 inches. Child size: height adjusts 29 to 41 inches.

Aluminum Adjustable Walker (Model 5567)

The Aluminum Adjustable Walker, Model 5567 is made of 1 inch anodized tubing with a satin finish. DIMENSIONS: Heigth adjusts 32 to 37 inches. WEIGTH: 13 pounds.

Aluminum Bowling Ramp, Two-Piece (Model H712061000)

The Aluminum Bowling Ramp, Two Piece, model H712061000, is a bowling ramp designed for use by individuals with upper extremity, mobility, or balance disabilities. This ramp can be used while seated or standing. The ramp is placed at the front of a lane and lined up for a direct path to the pins. The bowler simply gives the ball a slight push to send it rolling down the alley. The unit is made of high-strength aluminum alloy with a clear anodized finish and includes a "U" frame and one-piece ramp

Aluminum Cane (Model N300) And Aluminum Offset Cane (Model N301)

The Aluminum Cane (300 Series) and the Aluminum Offset Cane (301 Series) are straight canes with J or offset handles. They feature anodized aluminum shafts, padded handgrips, and adjustable height. DIMENSIONS: The height adjusts from 31 to 40 inches in 1 inch increments. WEIGHT: 12 ounces. COLOR: Grey or black.

Aluminum Folding Walker (Model W300N)

The Aluminum Folding Walker, model W300N, is a folding adjustable walker designed for use by individuals with mobility disabilities. This narrow walker has an anodized aluminum frame, reinforced chrome-plated crossbrace, and a two-button folding release mechanism. DIMENSIONS: The walker is 21 inches wide; between the handgrips it is 15 inches wide and 16 inches deep. The height adjusts from 26 to 29 inches. WEIGHT: 5 pounds.

Aluminum Forearm Crutches (Model 5580)

Aluminum Forearm Crutches, Model 5580 with plastic coated metal arm cuff designed to fit above or below elbow. DIMENSIONS: Height adjust 32 to 52 inches.

Aluminum Modular Ramp

The Aluminum Modular Ramp is a portable modular ramp designed for use by individuals with mobility disabilities. This all-aluminum ramp system provides wheelchair access to homes or businesses. The system can be assembled with little or no site preparation, and the modular components can be reconfigured or disassembled and moved to a new location. Components include straight ramps, 45 degree turns, 90 degree turns, and 180 degree switchbacks . DIMENSIONS: The ramps are 36 inches wide. All modul

Aluminum Portable Wheelchair Ramp

The Aluminum Portable Wheelchair Ramp is a folding aluminum ramp designed for use by individuals with mobility disabilities or spinal cord injury. The ramp has a non-slip, raised button surface for traction and safety. It folds in the center and has a handle for carrying. OPTIONS: Wheel kit for rolling transport and removable hinge pins allowing the ramp to separate into two sections. DIMENSIONS: Ramps are available in 5, 6, 7, 8, 10, or 12 feet lengths. All ramps are 30 inches wide. Custom dime

Aluminum Sectional Wheelchair Ramp System

The Aluminum Sectional Wheelchair Ramp System is a modular ramp designed to provide building access for wheelchair users. Sections are made from heavy-duty aluminum with a raised-button non-slip surface, and can be assembled into semi-permanent wheelchair access ramps. Because ections are interchangeable, the system can be expanded or reconfigured when needed. Ramps come standard with double bar rails made from galvanized steel with aluminum mounting brackets. OPTIONS: Handrail retro-fit kits fo

Aluminum Series Back Support

The Aluminum Series Back Support is a wheelchair back support designed for use by individuals with mobility disabilities or spinal cord injury. This contoured support is available for chairs from 10 through 20 inches in width. It is available with stationary or removeable mounting and adjustable positioning. It clamps to 0.6 through 1 inch tubing, round or oval, with no spacers required. The unit is compatible with 2-Point Pro and Quick Release mounting systems. SIZES: Low, medium, standard, tal

Aluminum Threshold Ramp

The Aluminum Threshold Ramp is a threshold RAMP designed to make doorways accessible to individuals who use wheelchairs or scooters. This aluminum ramp has an anti-slip, high traction sandpaper surface. The ramp has mounting holes in its top corners and comes with hardware to secure it to the doorway surface. DIMENSIONS (LxW): 8, 10, 12, 16 or 24 x 32 inches or 16 or 24 x 36 inches. The rise is 0.25 to 0.5, 0.5 to 0.75, 0.75 to 1, 1.5 to 2, or 1.5 to 3 inches depending on length. WEIGHT: 3 to 15

Alvema Ito Stroller

The Alvema Ito Stroller is a lightweight tilt-in-space stroller designed for use by children with physical disabilities. FRAME (HxLxW): The folding frame is available in two sizes. Folded dimensions are 23 x 13 x 30 inches (small) or 25 x 13 x 33 inches (large). The total width is 23 inches on the small size or 25 inches for the large size. Standard features include a height adjustable handle. Other optional accessories include a basket, sunroof, rain/wind cape, or grip rail. SEAT (LxW): 9 to 11

Alvema Trax 600 All Terrain Stroller

The Alvema Trax 600 All Terrain Stroller is an indoor/outdoor all-terrain stroller designed for use with children from eight to 16 years of age with mobility disabilities. FRAME: The folding tubular frame features an integral push handle, growth adjustments, and spring shock absorbers. The stroller is 24.5 inches wide. SEAT (WxDxH): 11.5 to 15.5 inches x 9.75 to 16.5 x 17.75 inches. The back height adjusts from 22 to 30.75 inches. The seat features105 to 127 degrees of tilt. Lateral supports and

Alvin Reflex Table

The Alvin Reflex Table is a height-adjustable tilt top work table designed for use by individuals who use wheelchairs. This table has a wide, open base and telescoping legs with easy-grip height-adjustment knobs. The large Melamine top is angle-adjustable from zero to 45 degrees and features a PVC rim to prevent items from rolling or sliding off. A half-circle cut-out provides access for wheelchair users. This table folds flat for storage. DIMENSIONS: The top is 30 x 40 inches. The height adjust

Ambi-Walker

The AMBI-Walker is a nonfolding wheeled walker with a seat designed for use by individuals with mobility disabilities. This unit consists of a PVC resin tubing frame with a mesh seat and back. The frame surrounds the user. Standard features include a washable padded seat cushion, a seatbelt, twin wheel casters, and a vertical entry arm with positive locking. The seat, armrests, and crossbar are height adjustable. SIZES: Standard, oversized, and pediatric.

Ambulatory Walker

The Ambulatory Walker is a height-adjustable nonfolding wheeled walker with seat designed for use by individuals with mobility disabilities. The tubular plastic frame surrounds the user on all sides and the front gate opens for easy access. The solid padded seat will not sag and an adjustable safety belt helps break accidental falls. The wide base provides stability and heavy-duty casters roll smoothly. DIMENSIONS (WxDxH): 23 x 27 x 37 to 40 inches.CAPACITY: 300 pounds.

Ambulizer (Model Mc-20)

Manual wheelchair, nonfolding. 2.5 inch cushioned solid seat and back cushions covered in Naugahyde, flip up service tray, swing away removable footrests, dual brake levers, upholstered leg support, 24 inch solid rubber rear tires, 6 inch rubber front caster wheels, 66 inch adjustable IV pole, 2 inch wide safety belt. Handrims on rear wheels. Seat width 20 inches, seat depth 17 1/2 inches.

Ambutech Adjustable Orthopedic Support Cane

The Ambutech Adjustable Orthopedic Support Cane is an adjustable offset cane with a choice of three molded ABS plastic handle configurations. The classic handle is a crook-style handle and features a flattened top for ease of grip and proper weight distribution. The modern handle is saddle shaped to allow for correct grip requiring minimal finger and hand strength. The T handle is T-shaped for proper weight distribution. These canes also feature a threaded insert system allows for universal len

Ambutech Fixed-Length Orthopedic Support Cane

The Ambutech Fixed-Length Orthopedic Support Cane is an offset cane with a choice of three molded ABS plastic handle configurations. The classic handle is a crook-style handle and features a flattened top for ease of grip and proper weight distribution. The modern handle is saddle shaped to allow for correct grip requiring minimal finger and hand strength. The T handle is T-shaped for proper weight distribution. These canes have a powder-coated aluminum shaft with a Sanotene rubber tip. DIMENS

American Access Modular Aluminum Wheelchair Ramp

The American Access Modular Aluminum Wheelchair Ramp is a modular ramp designed for use by individuals with mobility disabilities or spinal cord injury. Ramps come in four different lengths and two different widths. Platforms come in three sizes. Each ramp section comes with a pair of aluminum handrails. The top rails is round while the intermediate rail is rectangular. The handrails slide over the legs that support the ramp virtually disguising the legs from view and keeping the ramp system str

American Bidet Sitzbath Appliance

The American Bidet Sitzbath Appliance is a colonic treatment toilet seat with warm water for washing and warm air for drying. It is available with hand or food operated remote control, and easily attaches to any toilet in home or apartment. It is portable and removable; no special plumbing work necessary. The seat and lid also are removeable for cleaning.

American Ramp System Amramp Modular Steel Wheelchair Ramp

The American Ramp System AmRamp Modular Steel Wheelchair Ramp is a modular ramp designed for use by individuals who use wheelchairs or scooters or who cannot use stairs. The steel mesh design of the ramp allows for rain and snow to pass through, minimizing slippery conditions. Ramps are available for permanent and temporary applications, and may be installed the next day after purchase or rental. Ramps are available with or without handrails on both sides. OPTIONS: Turning landings. DIMENSIONS:

Americane

The AMERICANE is an ergonomic straight cane designed for use by individuals with balance, walking, or lower extremity disabilities. This cane features an ergonomic Switch Grip handle that contours to the hand and tilts downward, and can be used with the right or left hand. It is also equipped with the UltraTip for maximum ground contact. OPTIONS: Replacement Switch Grip, replacement UltraTip, cane holder, wristband, and Hurri/Cane-Crutch conversion. DIMENSIONS: Height adjustable from 29.5 to 38.

Ameriglide 300 Vehicle Wheelchair Lift

The AmeriGlide 300 Vehicle Wheelchair Lift is a scooter or wheelchair loader designed for use by individuals with mobility disabilities. This lift fits into most vehicles and works with most scooters and electric wheelchairs, including Jazzy power chairs and Pride scooters. The lift arm rotates manually after the unit is pushed or pulled into or out of the vehicle. The unit has telescoping base legs, an adjustable-length extending boom with a boom arm end cap to protect vehicle headliners, and a

Ameriglide Auto Scooter Lift 350

The AmeriGlide Auto Scooter Lift 350 is a hitch-mounted scooter carrier designed for use by individuals with mobility disabilities. The self-adjusting hold down arm is compatible with most scooters on the market. As the large aluminum platform starts to lift after the user drives the scooter onto it, the hold down arm engages automatically and applies the right amount of tension to hold the scooter securely in place. The platform also folds up automatically when not in use. The lift can carry sc

Ameriglide Bath Lift

The AmeriGlide Bath Lift is a powered bath lift designed for use by individuals with mobility or lower extremity disabilities. This one-piece bath lift is operated using a controller with large buttons. OPTIONS: Headrest with wing backs; swivel slide; lap harness with pommel; chest harness with pommel; seat base cover; full seat cover. CAPACITY: 300 pounds.

Ameriglide Battery Powered Stair Lift

The AmeriGlide Battery Powered Stair Lift is an interior stair lift designed for use by individuals with arthritis or mobility, lower extremity, or walking disabilities. The padded seat has vinyl upholstery, a movable footrest, and a curved backrest, and it swivels 180 degrees to allow the user to get on and off at top and bottom landings. The lift moves on nylon wheels. It has 24-volt Class 2 grounded controls and can be installed in left or right side orientation. Safety features includes sens

Ameriglide Electric Powered Stairlift

The Ameriglide Electric Powered Stairlift is an interior stair lift designed for use by individuals with mobility or lower extremity disabilities or arthritis. The lift has a movable footrest, a curved backrest, and a padded seat. The seat swivels 180 degrees to facilitate getting on and off at top and bottom landings. When seated, the user pushes a control button and the seat rides smoothly on nylon wheels. The lift has 24-volt Class 2 grounded controls throughout. Safety features include footr

Ameriglide Elite Residential Elevator

The AmeriGlide Elite Residential Elevator is a home elevator designed for use by wheelchair users or individuals with mobility or lower extremity disabilities or arthritis. The elevator can be installed in a multi-level home or public or commercial building that serves disabled or elderly individuals, such as a school, church, apartment complex, or senior citizen center. It has a rigid guide rail system; a traction sheave drive system with counterweights for energy-efficient operation; self-clos

Ameriglide Express Dumbwaiter

The AmeriGlide Express Dumbwaiter is a dumb waiter designed for use by individuals with mobility disabilities. This dumb waiter can be used to move goods and supplies in a multi-storied home. It carries up to 100 pounds, and moves up to 28 feet at a speed of 20 feet per minute while allowing for two to four stops along the way. The dumb waiter comes pre-assembled with a 1/3-horsepower 90 volts direct current (DC) motor with two automatic, low-voltage (24-volt) control switches. The unit has powd

Ameriglide Extender Plus

The AmeriGlide Extender Plus is a scooter or wheelchair loader for van designed for use by individuals with mobility disabilities. This interior-mounted lift can load a power chair or scooter into a full size van or minivan for transport. The lift is constructed from steel with a protective finish. It has an industrial rated 12-volt motor. The user drives on and connects the strap, and the lift loads the scooter or wheelchair. The maximum travel distance from the ground 26 inches. POWER: Uses ba

Ameriglide Heavy Duty Stair Lift

The AmeriGlide Heavy Duty Stair Lift is an interior seat lift designed for use by individuals with balance, lower extremity, or mobility disabilities or arthritis. This stair lift has a large, contoured seat with ajustable armrests and footrests, a contoured high-backed backrest, a padded seat, and vinyl upholstery. The lift runs smoothly on nylon wheels with a half-horsepower 90-volt direct current (DC) motor. It fits on staircases 36 inches or wider, and can be oriented to the right or left. T

Ameriglide In-N-Out Mini Universal Lift 200

The Ameriglide In-N-Out Mini Universal Lift 200 is a hitch mounted or in-the-vehicle carrier for smaller power chairs or scooters. With this lift, the user can store a power chair or scooter inside a vehicle for transportation. This weather-resistant lift also installs on Class II or Class III hitches. OPTIONS: Wireless remote; docking device for Shoprider, Pride, or other scooter brands; receiver hitch. CAPACITY: 200 pounds. WEIGHT: 35 pounds. WARRANTY: Transferable limited 3 year warranty.

Ameriglide Manual Wheelchair Lift 100

The Ameriglide Manual Wheelchair Lift 100 is a hitch-mounted wheelchair lift designed for use by individuals with mobility disabilities or spinal cord injury. The user places a folded manual wheelchair onto the platform, then pushes a button to raise the wheelchair. The lift can be installed on almost any vehicle with a class I, II, or III hitch as well as standard ball mounts. OPTIONS: Swing-away arm; manual wheelchair cover; receiver hitch. POWER: Uses vehicle battery. DIMENSIONS (HxW): 5 to 1

Ameriglide Mini Power Chair Lift 135

The Ameriglide Mini Power Chair Lift 135 is a hitch mounted wheelchair loader designed for use by individuals with mobiity disabilities or spinal cord injury. It can be mounted onto a Class I, II or III trailer hitch from 5 to 19 inches high and used to transport most portable electric wheelchairs. A strap system secures the wheelchair to the lift. The lift is battery powered with a manual folding platform. Using the manual backup crank, the lift can be operated if the battery looses its charge.

Ameriglide Mini Scooter Lift 135

The Mini Scooter Lift 135 is a hitch mounted scooter loader designed for use by individuals with lower extremity, mobility, or walking disabilities. This powered lift can attach to a Class I, II, or III hitch from 5 to 19 inches high, and supports most 3- and 4-wheel micro-scooters. It has a manual fold down platform and a manual override, so it can be operated in the event of a power disruption. The scooter is held in place with a strap. POWER: Uses battery. An optional battery pack is availabl

Ameriglide Mini Universal Lift 200

The Mini Universal Lift 200 is a trunk mounted scooter or wheelchair loader designed for use by individuals with mobility disabilities. This inside lift can be used for transporting micro or travel size power chairs or scooters. It can be installed in the vehicle's trunk or cargo area. It rotates manually and can be disassembled for storage when not in use. POWER: An optional battery pack is available. OPTIONS: Wireless remote and docking device (Shoprider, Pride, or others). DIMENSIONS: 37 inc

Ameriglide Premium Bath Lift

The AmeriGlide Premium Bath Lift is a powered bath lift designed for use by individuals with balance, lower extremity, or mobility disabilities or arthritis. The lift has a large, fold-down seat with automatic recline, and installs in the tub with suction cups. It can be disassembled for storage or transport. OPTIONS: Headrest with wing backs; swivel slide; lap harness with pommel; chest harness with pommel. POWER: Uses rechargeable battery. DIMENSIONS: Seat is 3.1 inches from the bottom of the

Ameriglide Rear-Door Drive-Thru Lift 350

The Rear Door Drive-Thru Lift 350 is a powered wheelchair or scooter loader for vans designed for use by individuals with mobility disabilities. This lift attaches to the vehicle's third-row seating hardware. When in operation, a platform extends out on rails from inside until it clears the rear of the vehicle. From there, the platform lowers to the ground. The user drives the power chair or scooter onto the platform, attaches the straps, and presses a button on a remote hand control. The power

Ameriglide Side Door Drive-Thru Lift 275

The Side Door Drive-Thru Lift 275 is a wheelchair or scooter platform lift designed for use by individuals with mobility disabilities. The lift installs on second row seating harware, so the power chair or scooter can be delivered near the passenger or driver's door making it more convenient to move from mobility device to vehicle and back. When the lift is in operation, a platform extends out on rails from inside the vehicle until it clears the side. From there, the platform lowers to the groun

Ameriglide Tilt-N-Go 350 Mini Lift

The Ameriglide Tilt-N-Go 350 Mini Lift is a hitch-mounted scooter carrier designed for transporting travel-size scooters. This all- aluminum carrier uses a 2-inch Class 3 hitch. OPTIONS: Class 2 hitch adapter; mobility cover; Class 3 Receiver Hitch. DIMENSIONS (LxW): Usable platform area is 44 x 24 inches. CAPACITY: 350 pounds. WEIGHT: 46 pounds.

Ameriglide Universal 250 Lift

The AmeriGlide Universal 250 is a automobile or sport utility vehicle (SUV) lift for smaller electric wheelchairs and scooters. It is an internal vehicle lift that allows the scooter or power chair to be stored inside the user's automobile. The lift has an integrated offset post to help clear the vehicle's bumper, and its base is adjustable to better match the vehicle's dimensions. Its telescoping boom rotates manually, with adjustable length and pitch to allow the user to attach the lifting str

Ameriglide Universal 350 Truck Bed Lift

The Ameriglide Universal 350 Tuck Bed Lift is a scooter or wheelchair loader for pickup trucks designed for use by individuals with mobility disabilities. With the push of a button, this unit can lift almost any mobility scooter or electric power wheelchair into a truck's bed using a boom arm and powered rotation (PR). It can be mounted on either side of the vehicle in most pickup trucks, whether it has an extended bed or an extended cab. Made from weather- resistant materials, the unit has an a

Ameriglide Universal 400 Pr Chair And Scooter Lift

The Ameriglide Universal 400 PR (Power Rotation) Chair and Scooter Lift is a wheelchair and scooter loader designed for use by individuals with mobility disabilities. This lift has a powered rotation boom for loading. It mounts inside the vehicle on either side and has an adjustable base and boom. An integrated offset post ensures that the user's scooter or wheelchair clears the vehicle's bumper. The telescoping boom has adjustable length and pitch that adjusts from 0 to 30 degrees. The unit has

Ameriglide Universal Outside Lift 350

The Universal Outside Lift 350 is a hitch mounted wheelchair or scooter loader designed for use by individuals with mobility disabilities. This lift works with both Class II and Class III hitches, and with most mobility scooters and electric power chairs. The user drives the scooter or wheelchair onto the aluminum platform and secures it in place using the built in retractors. Once the retractors are locked in place, the user pushes a button. The lift. DIMENSIONS: This loader can hold scooters u

Ameriglide Universal Outside Lift 350 Xl

The Ameriglide Universal Outside Lift 350 XL is a wheelchair or scooter loader designed for use by individuals with mobility disabilities. This unit can lift larger electric wheelchairs and scooters with wheelbases up to 48 inches long. Retractors lock the wheelchair or scooter in place. Due to its size, this unit works only with a Class III hitch. The unit comes with a standard Class III hitch receiver. POWER: Uses battery. An optional battery pack is available. OPTIONS: Swing-away arm; scooter

Amerityre Low Speed Foam Tires

Amerityre Low Speed Foam Tires, also called Flatfree tires, are foam core tires designed for use on wheelchairs. These tires have a polyurethane foam core and can never go flat. Because the density of foam is maintained at a high level, these tires exhibit low rolling resistance which means less effort is required to make them roll. Materials are ultraviolet (UV) and ozone resistant. SIZES: More than 75 sizes are available. COLOR: Black, grey, green, blue, or yellow.

Amerivan

Amerivan is a public transport van designed for use by individuals with mobility disabilities or spinal cord injury. This lowered-floor minivan includes quick-release removable front passenger seating, an optional fold-down middle seat, and enhanced rear seat capacity; a manual fold-out ramp with swing-out gate; non-slip vinyl flooring; and a Q'Straint tie-down belt system (see entries) with two floor tracks for anchoring the belts. The lowered floor is stainless steel, with stainless steel air

Amigo Classic Fd

The Amigo Classic FD (front drive) is a 3-wheeled scooter designed primarily for indoor surfaces and outdoor use on solid, flat surfaces by individuals with lower extremity and mobility disabilities. FRAME (LxWxH): 43 x 20 x 36.5 inches. The underbody ground clearance is 2.5 inches and the turning radius is 34 inches. The painted steel frame is available in midnight black with a black deck and midnight black front cover over the front wheel and midnight black rear cover (standard) over the batte

Amigo Escort

Amigo Escort is a powered transport wheelchair designed for indoor or outdoor use by individuals with lower extremity, mobility, neurological, or severe physical disabilities or spinal cord injury. This chair is equipped with an oxygen tank holder FRAME (HxLxW): 37.3 x 32.7 x 24.1 inches. The chair has a steel platform painted cinnamon red, with a turning radius of 21 inches and an underbody ground clearance of 3.3 inches. CONTROLS: ASIC MPC electronic controller with HI/LO control with On/Off

Amigo Ext

The Amigo EXT is a scooter designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury. This scooter is designed for larger-framed individuals, 6 feet tall and over. It is similar to the Amigo RD (see separate entry) with a 4-inch longer platform and a 2-inch longer handle. FRAME (HxLxW): 39.5 x 47.8 x 23.5 inches. The steel frame, painted cinnamon red, has a one-piece extended platform and a black rear safety bumper. The turning radius is 38

Amigo Hd

The Amigo HD is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities. It is designed for use by larger-framed individuals. FRAME (HxLxW): 39.5 x 47.8 x 24 inches. The steel frame is painted cinnamon red and has a one-piece extended platform with a 3.5-inch underbody clearance and a 38-inch turning radius and a black rear safety bumper. A basket mounted on the front of the tiller is standard. CONTROLS: EZ Tilt handle with HI/LO speed controls a

Amigo Lift-It

The Amigo Lift-It is an electric, hitch-mounted wheelchair/scooter loader with a built-in control designed for use by individuals with mobility disabilities. The lift is designed to be installed on cars, vans, or trucks with Class II or III receiver hitches and swing-away or hatch-type doors (fold-down tailgates not compatible). No permanent installation is required, and the lift is fully transferable between vehicles. The Lift-It disassembles into four lightweight components when not in use so

Amigo Rd

Amigo RD is a three-wheeled scooter designed for use by individuals with lower extremity and mobility disabilities. FRAME (HxLxW): 37.8 x 43.8 x 23.5 inches. The one-piece, painted steel platform has a 34-inch turning radius and a 3.5-inch underbody ground clearance. The scooter is available in a choice of cinnamon red, pacific blue, champagne beige or midnight black, with a black rear safety bumper. A basket mounted on the front of the tiller is standard. A basket mounted on the front of the ti

Amigo Rt Express

The Amigo RT Express is a three-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities. FRAME: (HxLxW): 34.75 x 41.5 x 20.5 inches. A version with a 3-inch shorter platform is also available (see separate listing for Amigo RT Express Junior). The scooter has a one-piece platform with an underbody ground clearance of 2.5 inches and a 33 degree turning radius. The painted steel frame is available in champagne beige, midnight black, pacific b

Amigo Rt Express Junior

The Amigo RT Express Junior is a 3-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity and mobility disabilities. FRAME (HxLxW): 33 x 38.5 x 20.5 inches. This compact scooter is designed to accommodate people up to five feet, four inches tall. A version with a 3-inch longer platform is also available (see separate listing for Amigo RT Express). The scooter has a one-piece platform with an underbody ground clearance of 2.5 inches and a turning radius of 33 inche

Amigo Smartmover & Smartmover Xl

The Amigo SmartMover and SmartMover XL are three-wheel scooters designed for use by visitors and employees in hospitals, museums, libraries, universities and other public spaces with lower extremity, mobility, neurological, or physical disabilities, obesity, or spinal cord injury. FRAME (HxLxW): 37 (30.5 at top of basket) x 49 (53 for SmartMover XL) x 24 inches. The steel frame features a black platform and tiller. A rear safety bumper and front and rear stability devices are standard. The turni

Amigo Travelmate

The Amigo TravelMate is a 3-wheeled portable travel scooter designed for indoor and outdoor use by individuals with mobility disabilities. FRAME (LxWxH): 43 x 22 x 36.5 inches. The TravelMate has an underbody ground clearance of 2.5 inches and a turning radius of 34 inches. The painted steel frame is available in black. The scooter disassembles or the tiller folds down for transport or storage. A basket mounted on the front of the tiller is standard. CONTROLS: MPC electronics controller. The con

Amigo Viva

The Amigo Viva is a 3-wheeled portable travel scooter designed for indoor and outdoor use by individuals with mobility disabilities. FRAME (LxWxH): 45 x 22.5 x 36 inches. This scooter has an underbody ground clearance of 2.25 inches and a turning radius of 35 inches. The painted steel frame is available in moss green. The tiller folds down for transport or storage. A basket mounted on the front of the tiller is standard. CONTROLS: MPC electronics controller. Controls are located on adjustable EZ

Amputee Attachment Kits

Kit converts any Colson fixed back wheelchair to an amputee model. Rear wheels are moved back 1 1/2 inches to accommodate loss of body weight in front of chair. Kit is shipped with one pair of toggle brakes designed to work with the repositioned 24 inch wheels. 5/8, 7/16, or 1/2 inch axles should be specified.

Amputee Board For Below-Knee Amputees.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Padded extension to one side of a wheelchair seat to allow the stump of an above-knee amputee to be elevated and remain in extension. Instructions for building a board to fit between the wheelchair and its cushion with retractable shelves that can accommodate either a left or right amputee; and a foam pad with strips of velfoam which attaches to pieces of velcro on the shelf. Includes list of materials, drawings and photographs. SKILLS REQUIRED: Woodwo

Ams Dodge Caravan Conversion

The AMS Dodge Conversion is a van conversion designed for use by individuals who use wheelchairs. This conversion makes a minivan into a wheelchair-accessible ramp van by completely remanufaturing the van to have a new lowered floor and power ramp system. This enables the wheelchair user to roll up into the van and park in one of several positions, including the driver's position. The conversion can be done for the Dodge Grand Caravan SE, which features anti-lock brakes, dual sliding doors, and

Ams Vans Chrysler Town And Country Conversion

The AMS Vans Town and Country Conversion is a van conversion designed for use by individuals who use wheelchairs. This conversion makes a minivan into an accessible wheelchair ramp van by completely remanufaturing the van to have a new lowered floor and power ramp system. This enables the wheelchair user to roll up into the van and park in one of several positions, including the driver's position. During the conversion, in addition to lowering the door and floor, the rear suspension is replaced

Amti Walker Sensor (Models Mcw-Pa, Mcw-Pp, & Mcw-Aa)

AMTI Walker Sensors are biomechanical sensors designed for use in gait and walker stability analysis and prosthetics fitting. Attached to a walker, this multiaxis transducer measures the forces transmitted through the walker. It measures the three orthogonal force components along the X, Y, and Z axes, and the moments about the axes, producing a total of six outputs. The sensor is available in pediatric anterior (model MCW-PA), pediatric posterior (model MCW-PP), and adult anterior (model MCW-AA

Amusement Roller Racer (Model 5000A)

The Amusement Roller Racer, Model 5000A, is a riding toy or scooter board designed for use by children with mobility, balance, or lower extremity disabilities. Propelled by swinging the handlebars/footrests from side to side, the Roller Racer can be ridden by individuals ages three years through adult, indoors and outdoors. The thick "rams-horn" handlebars are designed to protect and keep hands inside the rail. The buffer wheels are designed to protect the handlebar and the riding surface as wel

Amyseat Modular Power Seating System

The AmySEAT Modular Power Seating System is a powered reclining and/or tilt-in-space seating system designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. The seating system comes with either Power Tilt, Power Recline, or both. Power Recline comes with mechanical ISR (Integrated Shear Reduction). CONTROLS: Single actuator seat controller with dual toggle switch. SEAT (LxW): 14 to 24 x 14 to 24 inches in 1-inch increments. All systems include adjustab

Angle-Frame Two Position Tilt Mirror (Model B-294)

The Angle-Frame Two Position Tilt Mirror, model B-294, is a tilting mirror designed to provide easy visibility for persons in wheelchairs. This mirror has a type 304 stainless steel frame with satin finish, a float/plate glass mirror and a self-locking mechanism. The top of the mirror extends 7 inches from wall and the bottom of the mirror mounts on the wall with a full-length stainless steel hinge. DIMENSIONS (HxW): 30 x 16 inches. WARRANTY: 15 year warranty.

Angled Footrest.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Padded, angled footrest for use when seated in an armchair. Lists materials (wood) needed and provides instructions for constructing a footstool angled to support the feet in comfort. The height and angle of the stool can be determined by experimenting with cushions. Should be well padded, particularly under the heels. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Aids for Elderly People REF: London, England: Souvenir Press: p 84-

Angled Swivel Bar (Model 9029)

Angled swivel bar is inverted V shape to allow clearance of head. Straight swivel bar is needed for more seat clearance and all car transfers. CAPACITY: 400 pounds.

Animated Toys II

Animated Toys II is designed for individuals with cognitive and mobility disabilities due to developmental delays, brain injury or cerebral palsy. It is designed for individuals 9 months and older. It is comprised of 26 segments, each containing a toy animated on the computer screen. The toys are activated by the single press of a switch, mouse click, or the keyboard "enter" key. The toys incorporate cause & effect skills, increasing attention span, visual tracking, and focusing on objects.

Ankle/foot Straps

Pair of velcro straps with mounting hardware and D-ring closures. Can be mounted to padded footboards or existing wheelchair footrests, positioned to strap ankle or forefoot.

Anna-Dote

Anna-Dote is a back support cushion and solid back insert designed to aid individuals who use wheelchairs, or straight-back/recliner geriatric chairs to sit upright, allowing for the reduction in stress, discomfort and fatigue that can accompany a slouched to the side position. This positioning supportive aid fits over the backrest of either a wheelchair or a geriatric chair and provides patients with an extended backrest to keep them upright and prevent falling or sliding to the side of the cha

Anodized Aluminum Grab Bar (Models 6128, 6070, & 6129)

The Anodized Aluminum Grab Bar is a wall-mounted grab bar designed for individuals who need some assistance in maintaining their balance in a given setting. DIMENSIONS: 1 inch in diameter; extends 2 1/2 inches from the wall; length is 12 inches between mounting holes (6128); 18 inches between mounting holes (6070); or 24 inches between mounting holes (6129).

Anthro Tall-Ette Elevated Toilet Seat

The Anthro Tall-Ette Elevated Toilet Seat is a molded elevated toilet seat designed for use by individuals with mobility or balance disabilities. Made of polyethylene plastic, this seat unit slopes on either the left or right side and raises the toilet seat permitting the user to extend the leg without bending. The seat requires less than 90-degree hip flexion. The unit comes with a Lok-In El bracket that easily slides under the hinge pin of the existing toilet seat while two large posts mate

Anti-Slip Transfer Board With No Hand Holes

The Anti-Slip Transfer Board with No Hand Holes is a transfer board designed for individuals with balance, lower extremity or mobility disabilities. It to assist individuals with transfer between a wheelchair and a bed, shower bench, commode, car, chair, etc. or a stretcher and a bed. This sliding board can also provide assistance to enable a therapist or caregiver to perform of a transfer. The two-tone board is available in three lengths. DIMENSIONS (LxW): 21, 24 or 29 x 8 inches. WEIGHT: 2.5 p

Anti-Slip Transfer Board With Two Horizontal Hand Holes

The Anti-Slip Transfer Board with Two Horizontal Hand Holes is a transfer board designed for individuals with balance, lower extremity or mobility disabilities. It to assist individuals with transfer between a wheelchair and a bed, shower bench, commode, car, chair, etc. or a stretcher and a bed. This sliding board can also provide assistance to enable a therapist or caregiver to perform of a transfer. The two-tone board is available in three lengths. DIMENSIONS (LxW): 21, 24, or 29 x 8 inches.

Anti-Slip Transfer Board With Two Vertical Hand Holes

The Anti-Slip Transfer Board with Two Vertical Hand Holes is a transfer board designed for individuals with balance, lower extremity or mobility disabilities. It to assist individuals with transfer between a wheelchair and a bed, shower bench, commode, car, chair, etc. or a stretcher and a bed. This sliding board can also provide assistance to enable a therapist or caregiver to perform of a transfer. The two-tone board is available in three lengths. DIMENSIONS (LxW): 21, 24 or 29 x 8 inches. WEI

Anti-Thrust Solid Seat Insert (Model Ssp40Xx)

The Anti-Thrust Solid Seat Insert, model SSP40XX, is a solid seat insert designed for use on wheelchairs. The solid seat insert includes HR foam, T-nuts, and an anti-thrust seat, model MOD4400. DIMENSIONS: The foam is 1.5-inches thick.

Anti-Tipping Bracket (Models 85F & 85R)

The Anti-Tipping Bracket is an anti-tipping lever designed for use on wheelchairs. The device consists of a pair of curved tubes, each with a small roller wheel, that attach to the wheelchair frame. Model 85F extends beyond the front caster to prevent forward tipping of the wheelchair. Model 85R extends from the back of the chair to prevent rear tipping.

Apollo 4 and 4+ Cushion

The Apollo 4 is a battery-operated pressure-relieving cushion, suitable for use in a hospital or community care environment. It can also provide support for users on the move, as the battery will last up to 24 hours when used by a person of an average weight of 82 kilogram/13 stone. If the pressure drops below the specified required setting, the compressors in the Apollo 4 will automatically maintain the pressure to the level required.

Apollo Advantage Seated Bathing System (Models 6000 & 6300)

The Apollo Advantage Seated Bathing System is a whirlpool bathtub designed for use by caregivers in bathing individuals with mobility or severe physical disabilities. The system includes a bathing cabinet with a front door. Bathers enter the tub in a comfortable,secure chair and are bathed while seated. The chair is designed to move easily to allow the caregiver access to all areas of the body. Four whirlpool jets provide a gentle, massaging motion while a thermometer monitors water temperature.

Apollo Square Picnic Table - Wheelchair Accessible (Models T46Eb-3Sm & T46Eb-3S)

The Apollo Square Picnic Table - Wheelchair Accessible is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This square table is made of plastic-coated steel, with seats on three sides and space for a wheelchair on one side. The table has an umbrella hole in the center and is available in portable/surface mount (model T46EB-3SM) or inground frame (model T46EB-3S) models. OPTIONS: Aluminum mounting plates to hide mounting brackets and hard

Apollo Wheelchair Accessible Picnic Table (Models T9Ebrdcppsm & T9Ebhdcps)

The Apollo Wheelchair Accessible Picnic Table is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This rectangular picnic table has a single long table top with one long bench on one side and two shorter benches on the other, with space for a wheelchair between the two shorter benches. There is an umbrella hole in the center of the table top. The table is made of plastic-coated steel and is available with either a portable/surface mount

Applicator

APPlicator is a Bluetooth Switch Interface that allows children and adults with neurological and mobility disabilities who require simple switch access within apps and simple access to the media player on an iPad. It can be used with up to 4 switches or with a "tap" of a button go into "Quick-Media Mode" and use the same 4 switches to control your audio library. Users can press the Quick Media Mode button for pre-configured access to: play/pause, skip forward, skip back and Timed Play - 10 sec

Approach For The Cabinet

The Approach for Cabinets are motorized adjustable kitchen components designed for individuals who use wheelchairs or who cannot reach standard cupboards. This motorized wall cabinet adjustment system uses a powered push button system to raise and lower kitchen cabinets (cabinetry not included) through a 20-inch height adjustment range. DIMENSIONS: Fits W3030 to W4830. WARRANTY: Two years.

Approach For The Sink & Approach For The Cooktop

Approachfor the Sink and Approach for the Cooktop (sold separately) are accessible and adjustable kitchen components designed for use by individuals who use wheelchairs. These motorized counter systems enable push-button height adjustment of kitchen sinks and cooktops. A flexible drain line is required and available for the sink system. INSTALLATION: Can be installed into a 36 to 48-inch wide cutout by any experienced contractor. DIMENSIONS: The height adjusts from 28 to 36 inches. WARRANTY: Two

Apron For Walker

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Apron with pockets which ties onto a walker to help carry small objects. Drawing with instructions on sewing a carrier bag to tie on a walker, with pockets on the inside and outside. SKILLS REQUIRED: Sewing. AUTHOR: Independence Factory TITLE: Make it Cheap: Volume 3 REF: Middletown, Ohio: Independence Factory NARIC CALL NUMBER: R1183 PAGES (including cover): 2 1980.

Apt-5 Active Passive Digital Trainer

The APT-5 Active Passive Digital Trainer is a continuous passive motion device and progressive resistance arm and leg exerciser designed for use by seniors and individuals with neurological or physical disabilities. Fully digital, this unit enables the user to control speed, resistance, amount of spins and load levels. A remote control facilitates operation for users with limited movement abilities. This portable, standalone unit with an adjustable angle base can be used on a table top for upper

Apt-5 Hi-Lo Active Passive Digital Trainer

The APT-5 Hi-Lo Active Passive Digital Trainer is a continuous passive motion device and progressive resistance arm and leg exerciser designed for use by seniors and individuals with neurological or physical disabilities. Fully digital, this unit enables the user to control speed, resistance, amount of spins and load levels. A remote control facilitates operation for users with limited movement abilities. The unit is mounted on an adjustable stand so it can be positioned for either arm or leg ex

Aqua Creek Beach Stroller

The Aqua Creek Beach Stroller is designed for young children with limited mobility as a result of cerebral palsy, neurological involvement, and developmental delays to thoroughly enjoy the beach, sun and surf. Equipped with large inflated balloon tires, a collapsible PVC frame, non-corrosive stainless steel hardware and an advanced UV treated mesh vinyl cushion, this all-terrain stroller can safely transport users across the beach for years to come.

Aqua Ramp

The Aqua Ramp is a portable swimming pool ramp designed to provide swimming pool access for wheelchair users and others who have difficulty using a ladder or steps. This lightweight aluminum ramp has non-skid surfaces, and it is wide enough for most aquatic wheelchairs. It automatically adjusts with movable floor systems. The ramp includes a lower platform. DIMENSIONS (LxW): 12 x 3 feet; lower platform is 3 feet long. WEIGHT: 250 pounds. WARRANTY: 5 year structural warranty.

Aqua Saver Extended Height Ada Compliant Two Piece Gravity Fed Toilet (Model 21-717)

The Aqua Saver Extended Height ADA Compliant Two Piece Gravity Fed Toilet, model 21-717, is a tall toilet designed for use by individuals with mobility disabilities. This toilet has a high, elongated seat to support wheelchair transfers and to make sitting and rising easier for users with lower extremity disabilities or arthritis. Other features include low water consumption of 1.6 gallons per flush (gpf), siphon-jet flushing action, and a glazed trapway. DIMENSIONS (HxDxW): 31 x 27.5 x 20.25 in

Aqua Sprinter Flotation Belt (Model 700)

The Aqua Sprinter Flotation Belt is a float swimming aid designed for use by individuals with physical or neurological disabilities. This device is worn around the waist and can suspend an individual in a position that enables the spine to be suspended neutrally. The belt is designed to hold the swimmer securely at the waist in an upright position, with no tipping forward. This belt is made of closed-cell EVA foam and is latex free. It is equipped with an adjustable belt. OPTIONS: Instructional

Aquajoy Premier Plus Bathlifter

Aquajoy Premier Plus Bathlifter is designed for use by individuals with mobility and balance disabilities as a result of multiple sclerosis, stroke or Parkinson’s disease to assist with getting in and out of the bathtub.  It can be use with children and adults.

Aqualine Bath

Aqualine Bath is a height adjustable bath designed for use by individuals with mobility and balance disabilities who require assistance with bathing. This bath benefits the caregiver as well as the user, as it is height-adjustable. Caregivers can set the height of the bath at a comfortable level for them, using a simple control panel, helping to avoid back strain. Access into the bath is via a ceiling/wall mounted track or a mobile system. An attachable showering and changing top is available

Aquanaut (Model 180-00)

The Aquanaut, model 180-00, is a molded elevated toilet seat and back support designed for use by children who require extra support while toileting. This children's toilet seat supports children in a forward-leaning posture that promotes relaxation and helps them to function on the toilet. It has a contoured sitting surface which provides support for the hips and thighs and a child-sized opening which is narrower in front and wider in the back for ease in hygiene. The unit also includes a remov

Aquarian Bath Seat (Model Aqb6)

The Aquarian Six Slat Bath Seat, model AQB6, is a bath seat designed for use by individuals with lower extremity, balance, or mobility disabilities. Designed to be used in conjunction with the Aquarian Four Slat Bathboard (see separate entry), this seat is made from a durable extruded plastic tube and strengthened with internal plywood slats to accommodate a person requiring a larger seat area. The seat has an H-shaped frame on the underside. DIMENSIONS: The seat size (LxW) is 460 x 280 millimet

Aquarian Four Slat Bathboard (Model Aq48)

The Aquarian Four Slat Bathboard, model AQ48, is a bath seat designed for use by individuals with lower extremity, balance, or mobility disabilities or arthritis. This four-slat seat is made from a durable extruded plastic tube and strengthened with internal plywood slats, offering added support for the user. This seat has easy-to-fit cleats on the underside. DIMENSIONS: 26, 27, or 28 inches long; all seats are 230 millimeters wide. CAPACITY: 159 kilograms (25 stones).

Aquarian Six Slat Showerboard (Model Aq65B))

The Aquarian Six Slat Showerboard, model AQ65B, is a shower seat designed for use by individuals with lower extremity, mobility, or balance disabilities or arthritis. Made of extruded plastic tube strengthened with internal plywood slats, this bathboard is designed for users requiring a larger seat area. The seat’s underside is equipped with easy to fit cleats. DIMENSIONS: 26 inches, 27 inches, or 28 inches. All models are 14 inches wide. CAPACITY: 159 kilograms (25 stones).

Aquatec Bath Lift

Water hydraulic bath lift. Full length, customized, portable tub lift with backrest. Includes pillow. Connects to water faucet or shower tap. Uses standard water pressure for lifting and lowering. Finger pull operates hydraulic system. Detachable cover mats are washable and come in several colors. Options include carrier bag, attachable special cushion with side flaps, special back supports for vertebral relief or side support in any position, shower plug for alternative use of shower or bath li

Aquatec Beluga Bath Lift

The Aquatec Beluga Bath Lift is a powered bath lift designed for use by individuals with mobility disabilities. This battery powered lift lowers to 2.5 inches from the bottom of the tub, then its back support reclines 35 degrees. To return to the top, the back comes to the upright position and the lift rises to the top of the tub. The lift is operated with a push button hand control. A red safety light glows when there is not enough charge in the battery to run the lift for a full cycle, and a s

Aquatec Elan

The Aquatec Elan is a portable powered bath lift designed for use by adults with mobility disabilities. This lift fits standard tubs and features a non-reclining backrest and a floating hand-held controller. The unit includes latex-free cover mats and suction cups to secure the base to the tub. Side flaps fold in as the lift is lowered. POWER: Uses a sealed lead acid battery with no memory (battery and charger are included). The battery supports multiple up and down cycles per charge, with the n

Aquatec Ocean Self Propel (Model 712900)

The Aquatec Ocean, model A712900, is a height-adjustable wheelchair shower commode designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. The chair is constructed from stainless steel for maintenance-free use. The seat frame has a static ten-degree back tilt for comfort and the back upholstery is adjustable. Features include adjustable swing-away footrests, standard heel loops, locking front casters, rear wheelchair drive wheels with standard wheelch

Aquatec Ocean Shower Commode Chair (Model A710900)

The Aquatec Ocean, model A710900, is a height-adjustable caster shower commode designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. The chair is constructed from stainless steel for maintenance-free use. The seat frame has a static ten-degree back tilt for comfort and the back upholstery is adjustable. Features include adjustable swing-away footrests, standard heel loops, locking casters, and flip-up arms. The chair rolls over most standard toilets

Aquatec Ocean Xl (Model 713900)

The Aquatec Ocean XL model A713900, is a height-adjustable wheelchair shower commode designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. The chair is constructed from stainless steel for maintenance-free use. The seat frame has a static ten-degree back tilt for comfort and the back upholstery is adjustable. Features include adjustable swing-away footrests, standard heel loops, locking casters, and flip-up arms. The chair rolls over most standard t

Aquatic Access Lift (Model Igat-180)

The Aquatic Access Lift, model IGAT-180, is a pool lift designed for use by individuals with mobility or neurological disabilities or spinal cord injury. Self-operable, this lift is designed for use with in-ground pools and is powered by water. The folding seat features automatic 180-degree clockwise seat turn (opposite turn available), a right armrest, and a flip-up footrest attached to a mounting arm under the seat. The seat rotates forward to enter the pool and backward to exit the pool. The

Aquatic Access Lift (Model Igat-180Ad)

The Aquatic Access Lift, model IGAT-180AD, is a pool lift designed for use by individuals with lower extremity, mobility, neurological, or severe physical disabilities or spinal cord injury. Designed specifically for pools and spas with pool covers, this lift provides elevated deck clearance to allow for automatic pool covers or pool/spa combinations. This lift is user-operable, and the seat height adjusts to accommodate various wheelchair heights. The seat rotates forward when entering the poo

Aquatic Exercises Kit

The Aquatic Exercises Kit is an exercise planning program designed for use by physical therapists to create exercise plans for individuals with pain, decreased activities of daily living, movement and mobility dysfunction, deconditioning, or repetitive stress disorders. The program includes 138 professionally illustrated exercises for use in rehabilitation and fitness routines, and is available either as a set of reproducible cards or as a computer exercise database for use with PC-Kits software

Aquatrek Ladder

The AquaTrek Ladder is a pool ladder designed for use by individuals with balance or mobility disabilities. This portable and removeable ladder has stairway-style steps with siderails. It is available in four, five, or six tread (step) models, and can be custom built to fit the pool. Each tread comes with a nonslip safety surface. The ladder is constructed using a non-corrosive metal skeleton encased in a rigid PVC skin. The ladder is equipped with wheels for portability on deck. A heavy-duty ve

Aquatrek Ramp

The AquaTrek Ramp is a swimming pool ramp designed for use by individuals with arthritis or mobility disabilities. This ramp includes handrails, and is constructed with a stainless steel skeleton encased in a rigid PVC skin. The deck anchors are made of cast bronze. It can be left in ramp formation, configured into a step system (in appropriate pool depths), or used as underwater parallel bars. OPTIONS: Elevation kits for decreasing the slope of ramp. DIMENSIONS: Treads are 30 inches wide. SIZES

Aquatrek Step

The AquaTrek Step is a set of swimming pool stairs designed for use by individuals with balance or mobility disabilities. This set of stairs allows users to enter and exit a pool walking forward. It is available in six-, seven-, or eight-tread (step) models, and is custom constructed for each facility's pool. The unit is lightweight and portable. Each tread has three non-slip safety strips in contrasting colors; yellow strips are placed on the front of each tread to help make the treads more vis

Aquatrek Wheel Chair

The AquaTrek Wheel Chair is a pool wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This chair can be used in and around swimming pools, spas, and showers. It is totally submersible and may be used with any of the AquaTrek Ladder, Steps, or Ramps (see separate entries). FRAME: Furniture-grade PVC with stainless steel fasteners and one-piece Nylatron bushings. SEAT: Optional seat belt and shoulder harness. ARMRESTS: Swing arm. CASTERS: Front wheels are

Arboc Low-Floor Bus

The ARBOC Low-Floor Bus is a low-floor bus with a wheehair ramp designed for use by individuals with mobility disabilities. Built on a conventional GM cutaway chassis, this rear wheel drive bus has a manual wheelchair ramp which allows for loading and unloading through the door opening. The bus has a kneeling feature that allows an entrance of less than 5 inches from the curb when the ramp is not deployed. The interior includes theater seating for better viewing for all riders. The bus has a ful

Arcmate E-Z Reacher

The ArcMate E-Z Reacher is designed to assist individuals with limited reach or who need assistance in reaching objects without significant bending or stretching. This reacher features a plastic handle, a pair of flexible aluminum claws with round rubber suction grips, and an aluminum shaft. The reacher is designed for one-or two-handed use and can hold items weighing up to two pounds. Folding and locking models are available. SIZES: Compact, standard, folding. DIMENSIONS: The standard and fol

Arial Wireless Call System

The Arial Wireless Call System is a call signal and emergency alert system designed for use by seniors or individuals with severe physical disabilities in hospitals, long term care facilities, or residential facilities. The system includes a water-resistant pendant that can be worn on a necklace, belt, or wristband. The user can communicate wirelessly with staff by pressing a button on the pendant. Calls can be answered at the nurse station or routed to staff pagers. The system uses 900 megaHert

Arjo Dextra

Adjustable mechanical patient lift. Sling and frame design accommodates all types and sizes of people. C shaped base, 715 mm by 810 mm, for passing through narrow doorways and access to bulky wheelchairs. Contoured, reinforced slings with built in head support connect at four attachment points. Machine washable. Polyester. Tilting frame allows for upright or reclined positioning of person in sling. Wide lifting range allows lifting from floor up to high bed. Patient is transported at chair heigh

Arjo Lift Hygiene Chair, Arjo Lift Ride Chair, Arjo Lift Bath Trolley, & Arjo Therapy Trolley

Height adjustable battery powered patient lifts for single attendant transfers without lifting. U shaped base on casters. Lift stops automatically on contact with any obstruction. Height adjustment range to 23 1/2 inches. Lift ride chairs have range of 21 1/2 inches. 6 amp battery enclosed in plastic case. Low battery indicator light signals when 60% of capacity is used. Battery charger has circuitry for preventing overcharging. Maximum lift capacity 330 pounds. Lift Hygiene Chair has 2 part sea

Arjo Maxilift

Adjustable battery powered patient lift. Sling and frame design accommodates all types and sizes of people. Adjustable base for passing through narrow doorways and access to bulky wheelchairs. Contoured, reinforced slings with built in head support connect at four attachment points. Machine washable. Polyester. Tilting frame allows upright or reclined positioning in sling during transfer. Wide lifting range allows lifting from floor up to high bed. Remote control. 24V rechargeable battery with i

Arjo Pilot Lift Ride Chair

Person can be placed on seat while lying in bed, brought to sitting position and safety arm and backrest lowered around person. Some assistance from the person is needed. Lift is hydraulically adjustable, low base with casters. Seat can be lowered into elevating bathtub or used as commode seat for toilet. Bed pan holder attached. Stretcher can be attached to lift in place of seat.

Arm Pads (Model 6131)

Arm Pads, model 6131, are crutch underarm cushions designed for use with axillary crutches. These rubber pads fit wooden and aluminum crutches. COLOR: Gray.

Arm Support Aid Rail (Model 3033)

The Arm Support Aid Rail ##3033 is a stainless steel wall to floor grab bar for use next to a toilet. The support consists of an L-shaped bar with an extension arm that gives added stability to the vertical bar. This grab bar is available in 4 concealed or 4 exposed mountings, and in right or left hand configurations. DIMENSIONS: 30 (L) x 33 (H) inches with 5 (L) x 12 (H) inch extension arm. FINISH: Brushed Satin is standard; optional finishes include non-slip grips, metallic plating, and electr

Arm Support Rail

Stainless steel grab bar from wall to floor. 1, 1 1/4 or 1 1/2 inch diameter. Satin finish. Exposed or concealed mount. 30 by 30 inches.

Arm Tote (Models Ez0123 & Ez0124)

The Arm Tote is a wheelchair or scooter side pouch designed for use by individuals with mobility disabilities or spinal cord injury. Made of nylon, this pack attaches to the armrest of a wheelchair or scooter with the two adjustable straps with plastic fasteners. An inner pocket can be accessed by opening a full-length zipper. There are two (model EZ0124) or three (model EZ0123) pockets on the outside. SIZES: Large (model EZ0123) and small (model EZ0124). DIMENSIONS (HxLxW): 2 x 14 x 10.5 inches

Arm Tray Lateral Stabilizer (Models 706140, 706141, & 706142)

The Arm Tray Lateral Stabilizer is a combination lateral trunk support and arm trough designed for use by individuals who use wheelchairs. This foam-padded stabilizer fits wheechairs with full-length arms and reduces lateral leaning while providing improved arm positioning. Model 706140 has a washable polyester cover, model 706141 has a washable synthetic sheepskin cover, and model 706142 has a spray-and-wipe clean nylon cover.

Arm Tray With Arm Tray Pillow (Model A74610)

The Arm Tray with Arm Tray Pillow is an arm trough designed to provide arm support for people with upper extremity disabilities who also use wheelchairs. This tray features a comfortable, polyester fiber filled pillow containing extra filling underneath the hand for elevation to help reduce edema. The forarm portion of the pillow cups the arm, padding the sides and base of the tray. It includes all straps to securely position the pillow in the tray and the arm on the pillow. The pillow is machin

Arm Tray With Straps (Model A7461)

The Arm Tray with Straps, model A7461, is a plastic arm trough designed to provide arm support for people with upper extremity disabilities who also use wheelchairs. The tray is equipped with three Velcro straps to secure the device to the wheelchair and Kushionflex pad to buffer any potential area of irritation. The tray can be secured on chairs with standard arms using three straps and on chairs with desk-length arms secured by only two straps. DIMENSIONS: The straps are one inch wide and the

Arm Tray.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Provides support, elevation, or both for the forearm and hand of an individual setting in a wheelchair. Directions and materials given for 2 sizes of arm tray. diagram. similar to commercially available product. Attaches to wheelchair armrest. SKILLS REQUIRED: Woodworking, plastics. AUTHOR: Fahland, B. TITLE: Wheelchair Selection: More Than Choosing a Chair With Wheels. REF:Book: Sister Kenny Institute, Minneapolis, MN; p 47- 48. 1976.

Arm Trough (Model 07-D)

Arm trough has molded plastic shell with energy absorbing foam pad covered with molded naugahyde skin. Provides full support from elbow to hand. Overall length is 18 1/2 inches; bed length is 15 1/2 inches, depth, 1 1/4 inches; elbow stop is 3 1/2 inches long and 2 1/2 inches high; inside width is 4 inches, flares at front to 6 1/2 inches.

Arm Trough (Model 09-2000)

The Arm Trough, model 09-2000, is an arm trough designed to support and position the arm for use with seating systems and wheelchairs by individuals with mobility and neuromuscular disabilities. For use with on the left and right arm, the Arm Trough is made of .25-inch Kydex with 1-inch nylon webbing straps with faux sheepskin covers. Hook and loop straps or buckle closure are standard. SIZES: Small/pediatric, medium/adolescent and large/adult. DIMENSIONS (LxW): 12 x 4.5 (small); 17 x 5 (medium)

Arm Trough (Model 09-4000)

The Arm Trough, model 09-4000, is an arm trough designed to support and position the arm for use with seating systems and wheelchairs by individuals with mobility and neuromuscular disabilities. The trough is designed with a curved shape to help protect and keep the forearm in place and features a soft durable Lycra neoprene liner to help reduce skin irritation. Other features include an elbow block to keep the arm stationary in a tilted or reclined position, and a padded wrist strap with Velcro

Arm-A-Rest

The Arm-a-Rest is a carrying caddy designed for attachment to all wheelchairs with arm and/or back support. The pouches are fabricated of water repellant and stain resistant crushed velvet and drape over either the armrest or the back of the chair. The armrest version has a padded section which rests on top of the armrest pad; the bag storage version has a padded section which provides back support. The pouches attach with hook and loop strips. OPTIONS: A cushioned arm and storage pouch; a cushi

Arm/leg Ergometer Modification

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted arm/leg ergometer for use by an individual with mobility disabilities and who uses a wheelchair. The article outlines a simple adaptation of an ergometer for use by those with lower extremity disabilities. The modification involves using PVC tubing to adapt an existing exercise ergometer. The first step to modify an existing arm/leg ergometer is to remove the seat. PVC tubing is purchased and then cut to construct one meter

Armada Modular Ramp System

The Armada Modular Ramp System is a modular ramp designed to provide access for wheelchairs and scooters. The system includes ramps, platforms, support legs, and handrails. The system's universal platform design allows for virtually any configuration. Curbs and handrails can be positioned on any side. Components are made from anodized aluminum with heavy-duty welded construction. The bi-directional knurled tread forms a rugged skid-resistant surface that cannot wear off or peel. Height and slope

Armchair Caddy

DO IT YOURSELF ENTRY --- PURPOSE: To enable individuals with mobility disabilities to organize items at an armchair. Included in a chapter entitled “Living Room & Leisure Activities,” this article provides detailed instructions with illustrations for making a simple three-pocket caddy from a decorative dishtowel or hand towel. The towel is folded in half with the decorated sides together, and then one side is folded back so the hemmed edges line up with the half fold, creating the pockets. A

Armchair Fitness Aerobics

Armchair Fitness is an exercise videotape designed for use by seniors or individuals with mobility disabilities. The program includes three graduated 20-minute workouts of seated stretching and strengthening exercises set to music.

Armchair Fitness Gentle Exercise

Armchair Fitness Gentle Exercise is an exercise videotape designed for use by seniors or individuals with limited strength or range of motion. This 30-minute program begins with a slow, easy warm-up and includes a seated full-body routine and relaxation with dance-style music.

Armchair Fitness Strength

Armchair Fitness Strength is an exercise videotape designed for use by seniors or individuals with physical disabilities. This 40-minute program offers two 20-minute sessions for improvement of upper body and leg strength. Included is strength building using neckties and light weights, balance exercises that can be done seated or standing, seated dance, and gentle aerobics, all set to popular music.

Armchair Fitness Yoga Health

Armchair Fitness Yoga Health is an exercise videotape designed for use by seniors or individuals with physical disabilities. This 81-minute program offers three 27-minute sessions of seated coordinated stretching, yoga movement, and rhythmic breathing. Soothing music accompanies the program and no prior yoga experience is required.

Armrest Cane Crutch (Models 5190 & 5191)

Padded forearm trough on aluminum upright with safety rubber tip. Vertical contoured handgrip. Distance adjustable from front of trough. Silencing system eliminates rattle. Push button height adjustable tall adult 42 to 51 inches. Adult 36 to 45 inches.

Armrest Cushions (Models 436A4 & 436A5 Series) & Channel Armrest (Models 436A2 & 436A3)

The Armrest Cushions, models 436A4 and 436A4 series ($63 to $21), and the Channel Armrest, models 436A2 and 436A3 ($35 to $32), consist of steel reinforced armrests, injection molded with self skinning foam. Straight armrests, and desk or full length sizes are molded to cradle the arm for support. The Channel interchangeable armrest is molded to cradle the elbow and arm with several different hand pads available. The Cushions can be mounted directly to standard wheelchair arms or used with the 4

Armrest Fixed Bracket (Model 31897)

The Armrest Fixed Bracket, model 31897, is an add-on armrest bracket designed to allow any tray to be attached to wheelchairs. The 1/8-inch steel bracket has a baked epoxy finish. INSTALLATION: The bracket is attached to the underside of the tray using the included hardware; the tray is then installed on a wheelchair by sliding the bracket over any standard or padded armrest. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 days from the date o

Armrest Flip-Away Bracket (Model 31901)

The Armrest Flip-Away Bracket, Model 31901, is a bracket designed to connect trays to wheelchairs and allow the trays to be flipped up 90 degrees. The bracket is 1/8-inch steel with a baked epoxy finish and includes an aluminum flip bar and spacers. INSTALLATION: The bracket is attached to the bottom of the tray with the included hardware; the bracket slides over any standard or padded armrest. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 d

Armrest Inhibition Cradle

The Armrest Inhibition Cradle is an ABS plastic contoured arm trough with velcro-in vinyl pad. The trough has forearm and upper arm sections. The adjustable mounting hardware clamps to standard 7/8 inch tubing armrests.

Armrest Modification For Support Of Paretic Or Paralyzed Upper Extremity.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Modification of a wheelchair armrest to provide a surface for positioning or exercising a paralyzed or partially paralyzed arm. Describes an armrest made of wood padded with foam-backed carpet, which is attached to the arm of a wheelchair with a hose clamp, and which has a Velcro safety strap to hold the arm in place. Includes instructions, diagram and photographs. SKILLS REQUIRED: Woodworking. Assembly. AUTHOR: Pifer, R G TITLE: Armrest Modification f

Armrest Mounting Bracket (Model 3395)

Used in ocnjunction with a standard hand-control clamp for mounting a Model 3185 joystick for hand operation. Consists of a 1/2 inch diamter stainless steel mounting rod fitted to a 3/4 inch diamter mounting shaft to permit a wide range of joystick positioning.

Armstrong Lift

The Armstrong Lift is a powered or manual wheelchair or scooter loader for sport utility vehicles (SUVs)designed for use by individuals with mobility disabilities or spinal cord injury. With the lift in its folded position, the ultra-compact, left-mounted single post design creates 100 percent clear interior floor space, a clearer side view, and allows the rear passenger seats to be fully assembled for use. The side-mount design increases rear bumper clearance for loading and unloading and the a

Arrow Microcomputer Control (Mcc) Mk Ii

The Arrow Microcomputer Control (MCC) MK II is a motor and accessory control system designed for Invacare Arrow and Arrow XT series wheelchairs. The standard system includes a joystick with indoor/outdoor, high/low, on/off, and horn toggle switches; and battery level display, mode and level indicators. Other features include a standby mode; emergency stop switch input; and proportional head control compatibility. Adjustable performance features include indoor/outdoor performance, maximum speeds,

Arrow Walker Advantage

The Arrow Walker Advantage is a child's walker designed for use by children and smaller adults with cerebral palsy or other neuromuscular conditions. It can be used for taking first steps or to develop existing walking and standing abilities as part of a gait training program. The walker's low profile arrow shape allows easier access through doorways and around obstacles, and three directional locking casters allow the user to walk a planned course. The trunk support system includes a chest pad

Articulating Arm (Model H-1)

The Articulating Arm is switch mounting hardware designed to enable control switches and communicators to be placed in virtually any position for individuals with upper extremity or severe physical disabilities. The adjustable arm attaches to a table, wheelchair, bed rail, etc. Three knobs permit adjustability and lock the unit in position.

Ascension Protege Low-Rise Portable Wheelchair Lift (Model 5442P)

The Ascension Protege Low-Rise Portable Wheelchair Lift, model 5442P, is a mobile interior wheelchair lift designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This unit provides access to stages, platforms, risers, and other elevation changes up to 42 inches high. It has a steel frame and a sheet metal platform with an aluminum alloy underpan. The unit is fully portable and can be moved by one person for event setup. DIMENSIONS: Platform (LxW) 54

Ascension Virtuoso (Model 5460F)

The Ascension Virtuoso, model 5460F, is an interior wheelchair lift designed for use by individuals with spinal cord injury or lower extremity or mobility disabilities and others who use wheelchairs. This lift does not require a tower as part of its construction, nor does it have an access ramp so that a person can enter it directly from street level. The lift consists of a drive system, the passenger platform, and doors or gates. The platform is enclosed on four sides by transparent thermoplas

Ascension Virtuoso (Models 4860P And 5460P)

The Ascension Virtuoso are portable wheelchair lifts designed for use by individuals with spinal cord injury or lower extremity or mobility disabilities and others who use wheelchairs. These lifts do not have an access ramp so that a person can enter it directly from street level. The lifts consist of a drive system, passenger platform and doors or gates, all mounted on casters for portability. The casters lock, and the lift will not operate when they are not locked. The platform is enclosed on

Ascent Dumbwaiter

The Ascent Dumbwaiter is a dumb waiter designed for use by individuals with mobility or physical disabilities. It comes with the entire drive system pre-installed on the underside of the car, and the car chassis/trolley system pre-installed on a section of the track. Installation requires connecting sections of track, securing the drive cable to the header, and routing the wires to the control buttons and door interlocks. WARRANTY: 2-year warranty on parts and a 5-year drive train.

Ashmobile, The

DO IT YOURSELF ENTRY --- PURPOSE: To enable individuals who use walkers or crutches to ski. This device was designed to enable the user's hands to assist the skier's legs in supporting the body and also in executing turns. This was accompished by fastening a bar across the front and back of the skis in a manner that held them in a "snowplow" position but still allowed them to edge. At both ends of the front bar is a hole through which passes the outriggers (small skis on the end of standard cr

Asko Ada Height Compliant Dishwasher (Model D3112)

The ADA (American wth Disabilities Act) Height-Compliant Dishwasher, model D3112, is an under counter dishwasher designed for use by individuals who use wheelchaiirs. The unit has a front control panel, a balanced door, and operates at 49 decibels. It has upper and lower racks with adjustable tines in the lower rack and two adjustable stemware shelves, and can hold up to 12 place settings. It can be programmed for heavy wash, normal wash, quick wash, or rinse & hold, with 5 temperatures up t

Asko Ada Height Compliant Dishwasher (Models D3251Fi & D3251Hdss)

The ASKO ADA (American with Disabilities Act) Height-Compliant Dishwasher is a dishwasher designed for use by individuals who use wheelchairs. The dishwasher height is variable. Controls are hidden behind the door. Handle styles include towel bar, curved, or sense handles. The dishwasher can be programmed for six wash settings (Auto Wash, Heavy Wash, Normal Wash, Delicate Wash, Quick Wash, or Rinse & Hold) and for six temperatures up to 160 degrees Fahrenheit, or the right settings for washi

Asl 12 Volt Sealed Lead Acid Battery And Charger (Model Asl515)

The ASL 12 Volt Sealed Lead Acid Battery and Charger, model ASL515, is a battery for wheelchair accessories, switches, or sensors, designed for use by individuals with mobility disabilities. This transportable battery provides a 12-volt power source for accessories or 12-volt direct current (DC) switches/sensors. The battery is lightweight and can fit into a small wheelchair pouch. It provides 1.2 amp hours of power. The battery is sealed and comes with a charger. DIMENSIONS (HxLxW): 2 x 4 x 2 i

Asl Adjustable Photo-Electric Sensor With Mono Port (Model Asl209-M)

The ASL Adjustable Photo-Electric Sensor with Mono Port, model ASL209_M, is a photo-electric power wheelchair control switch designed for use by individuals with gross motor disabilities or mobility disabilities. This adjustable photo- electric switch can be used on a power wheelchair with ASL proportional driving controls, or for non-driving purposes. It requires the addition of an appropriate ASL 804 power source cable to receive power from the power wheelchair, and can be used with all power

Asl Button Switch (Model Asl305)

The ASL Button Switch, model ASL305, is a button switch designed for use by individuals with mobility, upper extremity, or severe physical disabilities or spinal cord injury. This light touch button switch has a mono port and can be used on a powered wheelchair or to control a computer or other accessory. OPTIONS: Armrest switch mounting bracket (model ASL 611).

Asl Laptop Power Converter (Asl509)

The ASL Laptop Power Converter, model ASL509, is a wheelchair battery adaptor designed for use by individuals with mobility disabilities. This adaptor enables the user to run a laptop computer using a powered wheelchair battery. The power source converter connects to the powerchair batteries and converts 24 volts to the voltage required to power a laptop computer. To operate, this converter requires the computer's automotive power adaptor and a model ASL804 power source adaptor.

Asl Low Voltage Power Leg Bag Emptier (Model Asl711)

The ASL Low Voltage Power Leg Bag Emptier, model ASL711, is a automatic leg bag emptier designed for use by individuals with neurological disabilities, spinal cord injury, or severe physical disabilities. This emptying mechanism for a leg bag receives power and operation signals from a for powered wheelchair. The leg bag emptying mechanism includes all necessary cables.

Asl Mouse Emulator/usb (Model Asl519)

The ASL Mouse Emulator/USB, ASL519, is a mouse emulator designed for use by individuals with mobility disabilities. This system allows a power wheelchair driving system to function as a mouse interface for an on-chair computer. Computer access is provided via the computer's USB port. The system works with all power chair types, and includes all interface cables. OPTIONS: Laptop converter (model ASL 509); joystick extension 5th switch with T handle or straight version with a mono port (model ASL

Asl Proximity Sensor With Mono Port (Model Asl204-M)

The ASL Proximity Sensor with Mono Port, model ASL204-M, is a sensor switch designed for use by individuals with upper extremity disabilities. This "no touch" switch can be used with ASL proportional driver controls with power wheelchairs or for non driving purposes such as computer control. This single function switch has an activation range of touch to half inch. Activation occurs when it senses a hand or another part of the body in the activation area. This switch is intended to be used throu

Aspen Battery Powered Lift (Model Bp350)

The Aspen Battery Powered Lift, model BP350, is a pool lift designed for use by individual with lower extremity, mobility, or severe physical disabilities or spinal cord injury. This lift lift is designed for installation in the decks of in-ground and above-ground pools/spas and has a single anchor point. The unit accommodates multiple setbacks, allowing for installation on pools/spas with large gutters and/or coping stones and has stainless steel construction with no paint to chip and no dissim

Assist-A-Tray

The Assist-A-Tray is a transfer aid and a swiveling tray for an armchair or sofa designed for use by individuals with balance or mobility disabilities. The unit features a sturdy, ergonomically designed handle for assistance when getting in or out of a sitting position and a multi-use swivel tray with cup holder and utensil compartment. The unit can be used on the right or left side of a chair or couch and the base slides underneath the furniture. The base has four feet with rubber pads to ensur

Assista-Rail

The Assista-Rail is a transfer aid for beds designed for use by individuals with balance or mobility disabilities. This inverted-U shaped rail slides between mattress and box spring and the required, included safety strap with side-release buckle and anti-slide grips prevents the rail from shifting during use. Made of heavy-gauge steel, the rail is equipped with a non-latex foam grip. DIMENSIONS: The unit extends 24 inches under the mattress and up from the mattress 16 inches. The rail extends a

Assistive Device For Forearm Crutch.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Plastic loop fastened to the shaft of a forearm crutch at just above wrist level so that a forward movement of the arm carries the crutch forward, for persons with weak hands. A strip of plastic 11 inches long by 1 1/2 inches wide is heated and bent into loops to fit around the arm on one side and the crutch shaft on the other, then fastened to the crutch with an adjustment screw assembly from a standard axillary crutch. Includes photographs. SKILLS RE

Assistive Device Kit (Model A665322)

The Assistive Device Kit, model A665322, is a long-handled sponge, long-handled shoe horn, and a reacher designed for use by individuals with reduced reaching capabilities, including individuals with upper extremity and mobility disabilities. The set includes a standard Handi-Reacher; a round, long-handled sponge; and a long-handled shoe horn.

Assistive Dining Device (Arm Sling)

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: This is an instruction on how to make an assistive dining device for people with limited or no arm strength (such as Muscular Dystrophy or ALS) but still have hand movement. The assistive device (Schleeder) is designed to work with spoon and bowl. The instruction is created for occupational Therapist or those whose loved one may be benefited from this device.

Asta-Cath Female Catheter Guide

The Asta-Cath Female Catheter Guide is cathetization aid designed for use by women with mobility, neurological, or severe physical disabilities, spinal cord injury, or urinary incontinence, or their caregivers. This device assists women in locating their urinary meatus. As the device is inserted into the vagina, it spreads the labia and one hole aligns with the urinary meatus. A 14 French or smaller catheter can then be passed into the bladder for emptying. The three alignment holes allow for mo

Astaire Plus

The Astaire Plus is a lighweight adult wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Carbon steel frame with double-coated chrome finish and dual axle that allows transition of seat to hemi-level. SEAT: 16-, 18-, 20-, or 22-inch width. UPHOLSTERY: Heavy-gauge flame-retardant black nylon upholstery. ARMRESTS: Removeable arm with padded nylon armrest. Removeable arm comes in a choice of desk- or full-arm styles, a

At Ease Adjustable Foot Support (Model Fs18Aj)

At Ease Adjustable Foot Support, model FS18AJ, is a foot support designed to promote proper posture, reduce fatigue and back strain and relieve stress on the legs, back and neck. The tilting support platform allows the user to vary the leg position and aids in circulation in the legs and feet. This foot support adjusts in height and angle and is ideal for workstations with multiple users. The platform is made of molded and texturized plastic and the frame is made of durable chrome tube. The supp

At Ease Standard Foot Support And High Foot Support (Models F300 & F600)

The At Ease Standard Foot Support and High Foot Support, models F300 and F600, are foot supports ergonimcally designed to support proper posture, reduce fatigue and back strain and relieve stress on legs, back and neck. The tilting support platforms allow the user to vary leg positions and aids in circulation in legs and feet. Both models have a durable wooden platform laminated with a non-skid vinyl surface; a lightweight chrome frame; and rubber feet to hold it in place. DIMENSIONS: Models F30

Atb-Ultimate

The ATB-Ultimate is a rough terrain sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches magnesium alloy powder coat frame. Frogs Legs rear elastic-polymer suspension is standard. The rear axel center of gravity is adjustable. The frame also had an adjustable angle push bar and custom cut aluminum side guards. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 8 to 20 inches i

Atigra Power Chair

Atigra Power Chair is a power wheelchair designed for use by individuals with spinal cord injuries, stroke or other neurological involvements.  The T2 seating system has been designed to provide optimal seating for the users. The power base suspension system has been designed to keep the user seated in a correct position.

Atlantis Bathboard

The Atlantis Bath Board is a bath board designed for use by individuals with spinal cord injury or mobility or balance disabilities. Designed to fit across the middle or against the back of a flat-topped tub, this bath board features front drainage slots and cleats designed to be positioned deep into the bathing surface and curved to fit the shape of the end of the tub. DIMENSIONS: The board is 686 x 470 millimeters, the backrest adjusts from 425 to 595 millimeters, and the bracket depth is 110

Atlas Electric Scooter Lift

The Atlas Electric Scooter Lift is a scooter or wheelchair loader for automobile trunks, vans, pickup trucks, and sports utility vehicles. This lift works with either three or four-wheeled scooters and manual or power wheelchairs weighing up to 250 pounds. This loader features a patented Lift'n Latch Boom Arm. The user lifts the arm up and a spring-loaded latch locks the arm in the raised position. Lifting the arm again releases the latch automatically, allowing the arm to be lowered. The contro

Atlas Hitch Lift

The Atlas Hitch Lift is a hitch-mounted scooter loader designed for use in vans or sport utility vehicles with third row seating that is not easily removed or does not fold into the floor. The lift works with three- or four-wheel scooters and manual or powered wheelchairs weighing up to 250 pounds. The rear hitch base assembly mounts to a Class II or III hitch. The swing arm enables the rear hatch door to be used without removing the base assembly. This loader features a patented Lift'n Latch Bo

Atlas Walker

Atlas Walker is designed for use by children with mobility disabilities associated with cerebral palsy, traumatic brain injury and muscular dystrophy. It is designed to encourage active weight bearing in young children. It features a height-adjustable frame, which has a swivel seat to allow hip movement when walking. This allows the user to develop their own gait pattern. The walker features: height, angle and depth adjustable handgrips; prone angle adjustments; and four castors with rear brak

Attaching Hardware Kit (Model 31096H)

The Attaching Hardware Kit, model 31096H, is lapboard mounting hardware designed to attach lapboards and trays to wheelchairs. This kit includes four truss head phillips screws, four mushroom head T-nuts, and four plain T-nuts and provides sufficient hardware to attach two clamps or brackets to a tray (tray not included).

Attaching Hardware Kit (Model 33066)

The Attaching Hardware Kit, model 33066, is lapboard mounting hardware designed to attach lapboards and trays to wheelchairs. This kit includes four 10-24 x 3/8 inch flat socket head screws, four 10-24 x 0.5 inch flat socket head screws, and four plain T-nuts and provides sufficient hardware to attach two clamps or brackets to a tray (tray not included). COLOR: The screws are black.

Attendant Caller

DO IT YOURSELF ENTRY --- PURPOSE: To enable a child with muscular dystrophy to summon assistance. A bicycle red LED light with a steady mode was purchased and opened up. The wires were fixed to points that would turn the lights on and off. Wires were then run to the outside of the light and connected to a micro switch (a limited pressure switch). The light was then mounted to the side of the back of the child's powered wheelchair using the standard bicycle mounting clamp that came with the light

Attendant Caller 2

DO IT YOURSELF ENTRY --- PURPOSE: To enable a child with muscular dystrophy to summon assistance at night while at camp. A cast off vibrating pager was modified by attaching very long lead wires that run to a micro switch, so when the father accompanies his son to camp, the child can page his father during the night instead of calling and waking the other campers. The child has the microswitch, and the father runs the wires across the room to his bed and wears the pager in his pocket. TITLE: Th

Attendant Wheelchair Control (Model 3320)

Used to expand the capability of a Multimode Interface by providing remote, attendant operation of the wheelchair. Uses a proportional joystick for precise control of wheelchair speed and direction. a toggle switch (with indicator light) is provided to ruen the attendant wheelchair control on and off. When the control is turned on, the Multimode Interface is automatically reset to standby status to prevent the wheelchair user from attempting to operate the wheelchair during attendant oepration.

Australian Medical Sheepskin

The Australian Medical Sheepskin is a decubitus pad designed for use by individuals at risk for pressure sores. The double-chrome tanned, high pile density Merino sheepskin is machine washable (up to 30 degrees Celcius). The soft, springy wool fibers of an Australian Medical Sheepkin absorb pressure from immobile limbs and joints, allow free air circulation, absorb moisture up to 34 percent of their dry weight without feeling wet, and wick the moisture away from the skin. DIMENSIONS (LxW): 42 to

Auto-Zero Weight Module (Model Sr801)

The Auto-Zero Weight Module, model SR801, is a transfer lift scale attachment designed for use by individuals with mobility disabilities or spinal cord injury. This self-contained, portable weight module converts Hoyer lift models C-HLA, P-HLA, E-C-HLA, P-C-HLA, and C-HLA-RB, or Invacare lift models from the 9800 and 9900 Series into a digital scale system. The scale has a five-digit liquid crystal display (LCD) that shows weight in either pounds or kilograms. POWER: Uses one 9-volt battery. DIM

Automated Driver’S License Dynamic Visual Acuity Screening Test (Model Vt-Dva-Dmv-07)

The Automated Driver's License Dynamic Visual Acuity Screening Test, model VT-DVA-DMV-07, is a driving fitness assessment program designed for use by individuals with physical disabilities. This multimedia, interactive touch screen test can be taken by individuals who cannot draw or use a writing instrument, and can be self-administered while seated in a wheelchair. It screens driver's license applicants for contrast sensitivity, dynamic visual acuity, night dynamic visual acuity, stereopsis, si

Automated Driver’S License Vision Screening Test (Model Vt-Sva-Dmv-07)

The Automated Driver's License Vision Screening Test, model VT-SVA-DMV-07, is a driving fitness assessment program designed for use by individuals with physical disabilities. This multimedia, interactive touch screen test can be taken by individuals who cannot draw or use a writing instrument, and can be self-administered while seated in a wheelchair. It screens driver's license applicants for contrast sensitivity, static visual acuity, night static visual acuity, stereopsis, sign recognition, s

Automatic Power Chair Lift (Model Al550)

The Automatic Power Chair Lift, model AL550, is a platform van lift designed for use by individuals with mobility disabilities or spinal cord injury. The lift's docking station features a self-aligning base, enabling the user to drive onto the platform and be locked in place. An audible latching sound is heard as the chair's pin passes into the locking mechanism, and attempting to back the chair verifies that the latch is locked. The docking base also includes a bright colored indicator pin to c

Automatic Wheelchair Anti-Rollback Device

The Automatic Wheelchair Anti-Rollback Device is a supplemental wheel locking device designed for use by individuals with mobility disabilities. As the individual rises from the chair, a pair of brake arms grab the tires to prevent the chair from rolling backwards. Once the user is seated, the device releases and goes into "stand-by" mode and the wheelchair returns to standard operation. Activated by spring tension, a padded lever beneath the wheelchair seat is depressed when the user is seated.

Automatic Wheelchair Anti-Rollback Device

The Automatic Wheelchair Anti-Rollback Device is a supplemental wheel locking device designed for use by individuals with mobility disabilities. As the individual rises from the chair, a pair of brake arms grab the tires to prevent the chair from rolling backwards. Once the user is seated, the device releases and goes into "stand-by" mode and the wheelchair returns to standard operation. Activated by spring tension, a padded lever beneath the wheelchair seat is depressed when the user is seated.

Automatic Wheelchair Lock

The Automatic Wheelchair Lock is a wheelchair restraint system for use by people with lower extremity or mobility disabilities, spinal cord injury and others who use a wheelchair. The user can roll forward into the Automatic Wheelchair Lock, which provides a stationary and stable position for a wheelchair during travel. The anchor post for the system mounts to the floor of the vehicle. The restraint bolts to post and hooks to frame of wheelchair. It automatically unlocks at touch of the device's

Autopantry, The

The AutoPantry™ is a motorized, electric kitchen storage system designed for use by individuals with upper extremity, mobility, or neurological disabilities or spinal cord injury. It has 2 columns of shelves, one behind the other, and operates as a vertical carousel, bringing shelves up, down and around so that items are within reach. The AutoPantry™ can also bring items from the back of the pantry to the front for easier access.

Autostep

The AutoStep is a gait trainer designed for use by children with lower extremity, mobility, or walking disabilities. This unit cues proper stepping patterns for individuals with high or low function. The unit attaches to many walkers, including all Rifton Pacers (not included; see entry) and most LiteGait models on and off the treadmill, and provides a constant symmetric cue for the user to achieve a more symmetrical gait pattern. Adjustable tension bands attach to the user's feet to accommodate

Avenger 4-Wheel Scooter

The Avenger is a heavy-duty 4-wheeled scooter designed for outdoor use by individuals with mobility disabilities. Designed to traverse uneven terrain and travel at higher speeds, this scooter includes a front basket, bumper guards, a headlight and flashing safety tail lights. FRAME (LxW): 51.5 x 25 inches. The turning radius is 48.5 inches and the ground clearance is 4 inches. The scooter disassembles for transport. This scooter is charcoal grey. CONTROLS: 110-amp programmable controls. RWD: 24-

Awesome Grip

Awesome Grips are handrim covers designed for use by people who use wheelchairs. These removable, changeable covers fit the push wheels of manual wheelchairs and have a closed cell foam base with a fabric or leather cover. The covers do not slip on the rims, are designed not to slip in the hands, and provide a larger, softer gripping surface. The covers are available in leather, imitation leather, fabric, velveteen, and plush fabric. COLORS: Leather and velveteen covers are available in red or b

Awesome! Golf Tees

The AWESOME! Golf Tees are golf accessories designed for use by individuals with balance, mobility, or lower extremity disabilities or arthritis who have difficulty bending, stooping, or reaching the ground. The tee has a metallic component that allows it to be picked up by a magnet screwed into the end of a golf grip. The set includes five AWESOME! Golf Tees and one Grip Magnet. DIMENSIONS: 3.25 inches long.

Axiom Mobility Xplorer 2

Axiom Mobility Xplorer 2 is a stroller designed for indoor or outdoor use by children with cerebral palsy, mobility disabilities, or severe physical disabilities. Features include an aluminum frame, adjustable footplate and straps, indoor swivel wheels, push-button wheel release, safety wrist strap, all-weather rain canopy, and tire pump. DIMENSIONS (HxLxW): 48 x 58 x 24 inches open and 14 x 40 x 20 inches folded and without wheels. The seat (LxW) is 15 x 15 inches and the back height is 28 inch

Axiom Mobility Xplorer 3

The Axiom Mobility Xplorer 3 is a stroller designed for indoor or outdoor use by children or adolescents with cerebral palsy, mobility disabilities, or severe physical disabilities. FRAME (HxLxW): Open the stroller is 52 x 48 x 27 inches and folded it is 14 x 40 x 23 inches. The frame is made from welded aluminum, and comes with a padded height-adjustable push handle, a sun canopy with viewing window, and a basket measuring 12 x 19 x 15 inches. SEAT (LxW): 15 x 18 inches. The reclining padded se

Axion Rotary Interface For Wheelchair Headrests

The Axion Rotary Interface™ for Wheelchair Headrests is a headrest accessory designed for use by individuals with severe physical or neurological disabilities or spinal cord injury. This device permits wheelchair headrests to rotate, and it attaches to most existing wheelchair headrests and hardware. This unit is quiet, free-running, and it does not require lubrication. The range of rotation can be limited or stopped.

Axle Bracket

The Axle Bracket is a rear wheel position adapter for wheelchairs designed to provide additional height adjustability for the axles on a wheelchair without drilling the frame. Two 9 mm aluminum plate brackets bolt into the existing adjusting holes on a wheelchair frame. The wheel axle can be bolted to the adjusting slot on the bracket. PROTOTYPE DEVELOPMENT: Designed by Andre Paquette for a user who could not adjust the seat height on the wheelchair low enough. Modifications by the wheelchair ma

B*mobile Ambassador (Model Dks500)

The B*MOBILE Ambassador, model DKS500, is a four-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. This scooter is equipped with a front basket, dual rear view mirrors, cell phone holder, and water bottle holder. FRAME (HxLxW): 37 x 47 x 25 inches. This scooter has front and rear suspension and a 43-inch turning radius. CONTROLS: Dynamic Rhino 70-AMP controller. SEAT (LxWxH): 19 x 19 x 27 inches. The adjustable reclining high-back seat has a headrest,

B*mobile Executive (Model Dks320)

The B*MOBILE Executive, model DKS320, is a three-wheeled scooter designed for multi-surface use by individuals with mobility disabilities. This scooter includes a front basket, dual rear view mirrors, and holder for a cell phone and water bottle. FRAME (HxLxW): 37 x 47 x 27 inches. This scooter has rear suspension and a 39-inch turning radius. CONTROLS: Dynamic Rhino 70-AMP controller. SEAT (LxWxH): 19 x 19 x 27 inches. The adjustable, reclining high-back seat is equipped with a full-range slidi

B*mobile President (Model Dks600)

The B*Mobile President, model DKS600, is a 4-wheeled scooter designed for use by individuals with lower extremity and mobility disabilities. Standard equipment includes a front basket, dual rear view mirrors, and a cell phone and water bottle holder. FRAME (HxLxW): 38 x 47 x 26 inches without the seat. The frame includes front and rear suspension. This scooter has a turning radius of 42 inches and can handle a maximum curb height of 4 inches. CONTROLS: Dynamic Rhino 110-amp controller. SEAT: Adj

B*mobile Sport Scooter (Model Dks200)

The B* Mobile Sport scooter, model DKS200, is a 3-wheel, lightweight, portable scooter designed for use indoors or outdoors by individuals with lower extremity or mobility disabilities. FRAME (HxLxW): 35 x 38 x 20 inches. The turning radius is 36 inches with a ground clearance of 2 inches. The frame disassembles into four parts for transport. CONTROLS: 45 amp DK CITY DS 45K. SEAT (HxW): 13 x 16 inches. This seat is contoured and has multiple height adjustments and 360-degree rotation. ARMRESTS:

B*mobile Travel Mate (Model Dks-280)

The B*Mobile Travel Mate, model DKS-280, is a four-wheeled portable scooter designed for use by individuals with mobility disabilities. This scooter includes a front basket and dual rear view mirrors. FRAME (HxLxW): 34 x 42 x 24 inches. This scooter has a turning radius of 41 inches. CONTROLS: DK CITY DS 70K 70 Amp controller. SEAT (HxLxW): 19 x 19 x 16 inches. The low-back, foldable seat is height adjustable with 360-degree seat rotation. ARMRESTS: 10-inch, flip-up arms. BRAKES: Intelligent reg

Baby Beach Jogger

The Baby Beach Jogger is a stroller designed for use with children with lower extremity, mobility, or severe physical disabilities. This stroller has a stainless steel frame that collapses for transport and storage, large wheels designed to handle beach and other outdoor terrain, and a protective hood. WARRANTY: Five-year warranty on frame and a 30-day money back guarantee.

Baby Builders

Baby Builders is a video exercise program designed to teach parents of infants with cognitive, neurological and physical disabilities how to exercise their infant in a safe manner. Developed by a pediatric physical therapist, the program provides information on child development and exercise techniques to aid in development from birth through the time of walking. Baby Builders combines fun play activities with skills to build strength, balance, movement, and coordination. The program is availa

Baby Lambskin Rug + Woolskin

The Baby Lambskin Rug + Woolskin is a bed and decubitus pad pad designed for use with infants and children with severe physical or neurological disabilities or spinal cord injury. These lambskins can be used in cribs, beds, strollers, and car seats. DIMENSIONS: 26 x 36 inches. The pile is 24 millimeters. COLOR: Champagne.

Baby Prone Board.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Tilted prone board for a young child with head control; it leaves the hands free to play while helping to keep the hips and knees straight. Plywood board with a cutout for the toes and a footrest. The front end of the board is higher than the rear. Includes drawing and photograph. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Aids for Your Handicapped Child REF: London, England: Souvenir Press: p 62-63. Also available from Prentic

Baby Walker With Toy Chest (Model H70310)

The Baby Walker with Toy Chest, model H70310, is a child walker designed to assist children with disabilities to walk while pushing a wheeled toy or carriage. The unit functions as a toy, therapeutic aid, and mobile toy box. A parking brake is included that allows the device to be useful for sitting. The walker consists of a plastic box with lid set in an epoxy-coated aluminum tube frame on four wheels with a sloped handle which is height adjustable from 23 to 27 inches. All of the wheels have s

Back Open Jacket (Models 353 To 367)

The Back Open Jacket is a child's or adult's jacket designed for wear by individuals who use wheelchairs. This machine-washable jacket is made of either sweatshirt fleece or Polartec and is designed for wear by individuals who sit for extended periods. Features include a ribbed V neck, a front zipper withpull ring, and Velcro tabbed back closure for ease in assisted dressing. Models 353 and 354 are made of sweatshirt fleece and models 360 to 367 are made of Polartec. SIZES: Models 353 and 363 ar

Back Overlap Opening Dress (Model 21380)

The Back Overlap Opening Dress, model 21380, is a women's dress designed for wear by senior women and women with arthritis or other physical disabilities. Made of polyester faille, this dress offers elbow-length sleeves, a generous back overlap, and dome closure at each shoulder for ease in assisted dressing. Other features include button front detail, shoulder pads, side seam pockets, and a tie belt. SIZES: Small, medium, large, and extra large. COLOR: Blue elegance, red sunset, or assorted pri

Back Scrubber

The Back Scrubber is a back scrubber designed for use by individuals with upper extremity or mobility disabilities. This plastic scrubber has textured, fish-shaped handles to aid in holding for scrubbing the entire back. One side massages, the other stimulates. The scrubber can be cleaned by rinsing under warm water and air drying. DMENSIONS (LxW): 41 x 2.75 inches.

Back Snap Mens Sport Shirt

The Back Snap Mens Sport Shirt, is a men's shirt designed for wear by men with mobility disabilities or those who have difficulty dressing. This golf-style shirt with front placket is designed with three front-opening functional buttons to make dressing and undressing less difficult. The shirt is made of cotton and polyester knit. The shirt can be ordered in the short or long sleeve version. SIZES: Small, medium, and large are standard. Extra large, extra extra large, extra extra extra large, an

Back Snap Niteshirt (Model 27-03)

The Back Snap Niteshirt, model, 2703 is a men's nightshirt designed for use by wheelchair users or individuals who spend a lot of time in bed. Made of a cotton and polyester blend fabric, this nighthirt snaps all the way down the back. It features long sleeves, a pocket, button front trim and contrast piping trim. SIZES: Small, medium, large, or extra large. COLOR: Assorted patterns and colors.

Back Spa Back Scrubber

The Back Spa Back Scrubber is a back scrubber designed for use by individuals with balance or mobility disabilities. Made with soft bristles and an ergonomic handle, this back scrubber is designed for massaging and cleaning the back without the need for twisting or turning body movements. The opposite side of the Back Spa has well-placed bumps for a deeper massage or rubs. COLOR: Pearl blue.

Backpack Retriever

The Backpack Retriever is a wheelchair back pouch access aid designed for use by individuals who use wheelchairs. This device brings a backpack from behind the chair to within reach of the user with a click of a button. Without increasing the overall dimensions of the wheelchair, the unit is aesthetically designed to fit most power wheelchairs and does not interfere with accessibility through doorways. The patented linkage mechanism enables the device to be used in close or confined areas such a

Backsnap Fleece Robe

The Backsnap Fleece Robe is a women’s robe designed for use by women with mobility disabilities or other physical disabilities. Made of 100 percent acrylic fleece, this robe has long sleeves and a round yoke, and patch pockets. SIZE: Small, medium, large, extra large, extra extra large, and extra extra extra large. COLOR: Solid prints.

Balance Beam

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: To develop coordination and balance skills in children working on improving gross motor skills.

Balance Fishing

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: To develop coordination and balance in children working on improving gross motor skills.

Balance Fun Set

The Balance Fun Set is a balance training device designed for use with children with balance, neurological, or mobility disabilities. The set is made up of four separate pieces of a full circle, all of which can be used individually for multiple activities, or together as a single unit. The interchangeable set can be used to rock, roll, balance, or climb. The front, back, and sides of the pieces all provide different surfaces and ideas for play. The pieces may be place on their sides to create

Balance Kit #6: Obstacle Course

The BALANCE KIT #6 is designed to help children improve their balance, motor planning, coordination and problem-solving skills. Three separate components can be combined together in different ways to create various obstacle courses. Include the children in designing the courses to work on problem-solving and cognitive (thinking) skills. The Balance Kit #6 comes with the following: Build N' Balance Red Tops: Set of three 9.5" high plastic with rubber feet to prevent slipping and easy stacking sto

Balance Maze

Balance Maze is designed for children with gravitational insecurities, balance and motor coordination disabilities.  Users must move a ball around the plastic maze. The pivot point, placed directly under feet, is gently rounded. It is designed to move the ball while maintaining a sense of security. Add difficulty by using the two balls (included) simultaneously.

Balance Ring Attachment (Model 6068)

Metal body support ring covered with foam padding and Naugahyde. Opens for entry or exit. Adult ring size 14 1/2 by 17 1/2 inches, height adjusts 12 inches. Junior ring size 12 1/2 by 10 1/2 inches, height adjusts 8 inches. No further description given.

Balance Training System For Children

---- PROTOTYPE --------- PURPOSE: To create a prototype of a balance training system for children with disabilities using Wii balance board technology. Students from Rice University linked together five Wii balance boards to a computerized motion tracking system and developed a game based on this system to help children advance their balance skills. The boards are lined up in a row between active handrails that provide feedback on how heavily users depend on their arms. The game requires the use

Baller Elite

The Baller Elite is a sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. Magnesium alloy powder coat frame with 1.375-inch tubing. Aluminum side guards are standard. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest is welded and non-folding. UPHOLSTERY: Laminated carbon fiber sailcloth adjustable by tension cord. CASTERS:

Bamboo Bath Mat

The Bamboo Bath Mat is a bathtub or shower mat designed for use by individuals with balance or mobility disabilities. Made of genuine bamboo slats, this after-shower or after-bath step-out mat features non-slip backing that helps keep it in place to avoid slipping when the user exits the shower or tub. This mat is also water resistant and has a finished poly stitched border. DIMENSIONS (LxW): 34 x 21 inches.

Bari 385 Transport Commode Shower Chair

The Bari 385 Transport Commode Shower Chair is a bariatric commode shower chair designed for use by individuals with mobility disabilities. This chair has a powder coated stainless steel frame with drainage holes and a urethane foam commode seat with front opening. A bed pan and basket are included with the commode seat. The seat has up to 8 degrees of anterior tilt and 14 degrees of posterior tilt, with up to 65 degrees of back recline. The fixed-height armrests can be removed or rotated to adj

Bariatric Bath Transfer Bench (Models Pvcm16536700 & Pvcm16536900)

The Bariatric Bath Transfer Bench is a transfer bench designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This heavy-duty bench is made of PVC plastic with dual reinforcement throughout the frame. The bench has a high-density polyethylene foam cushion with non-slip rubber grips for safety. The 900-pound capacity transfer bench has an extra leg for increased stability. CAPACITY: 700 pounds (model PVCM16536700) or 900 pounds (model PVCM16536900). DI

Bariatric Bedside Commode / Shower Chair (Pvcm130C10Bcs)

The Bariatric Bedside Commode/Shower Chair, model PVCM130C10BCS, is a shower chair and commode designed for use by individuals with mobility disabilities. The chair has a high-density polyethylene seat with a removeable seat cushion. There are non-slip rubber tips on the chair legs, and safety grips on the arms. DIMENSIONS (HxLxW): 43 x 28 x 34 inches overall and 30 inches wide between the armrests. CAPACITY: 700 pounds.

Bariatric Belgrave Commode (Model 190)

The Bariatric Belgrave Commode, model 190, is a height-adjustable commode with removable arms designed for large individuals with mobility or severe physical disabilities. This commode has a dip-coated, non-peel frame; a padded backrest and commode seat cover; a molded clip-on commode seat; and a removable oval commode pan. DIMENSIONS: The seat height adjusts from 460 to 610 millimeters (mm), the width between arms is 605 mm, the seat depth is 430 mm, the distance from the eat to the top of the

Bariatric Chair / Stretcher (Model Mdtmbc835)

The Bariatric Chair/Stretcher, model MDTMBC835, is a stretcher wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This manual wheelchair converts to a rolling stretcher with the flip of a switch. FRAME: 39 inches wide. The chair / stretcher comes with an IV rod and oxygen holder. SEAT: The seat is 31 inches wide. The back has an electrically-driven recline function and is infinitely adjustable. ARMRESTS: Includes independently adjustable armrests. FOOTRE

Bariatric Crutches

The Bariatric Crutches are axillary crutches designed for use by obese individuals with mobility, walking, or balance disabilities. These heavy-duty steel crutches are height adjustable and have extra-large rubber tips. They feature cushioned underarm pads and handgrips. SIZES: Small (adjusts for individuals between 4 feet 6 inches and 5 feet 2 inches tall); medium (adjusts for individuals between 5 feet 2 inches and 5 feet 10 inches tall); and large (adjusts for individuals between 5 feet 10 in

Bariatric Flip Seat Scale (Model Mph07Db1)

The Bariatric Flip Seat Scale, model MPH07DB1, is a platform seat scale designed for use by bariatric individuals with mobility disabilities. This scale has a flip down seat with foam hand grips and an extra wide platform, enabling individuals to be weighed in a sitting or standing position. It has a wrap-around tubular stainless steel design with a non-slip rubber mat and hand grips. Other features include wheels for mobility and a high-contrast liquid crystal display (LCD). POWER: Uses 6 C siz

Bariatric Handrail

The Bariatric Handrail is a handrail designed for use by individuals with balance, lower extremity, or mobility disabilities. The handrail is made of aluminum with powder coat. Bracket and return/corner are available in stainless steel with optional powder coat. The grip is 1.5 inches in diameter, and it extends 3 inches from the wall. All mounting fasteners are included with the product. DIMENSIONS (LxD): 12 feet x 1.38 inches. CAPACITY: 1000 pounds. WARRANTY: Limited lifetime warranty.

Bariatric Hi-Lo Treatment Table (Model 4795)

The Bariatric Hi-Lo Treatment Table, model 4795, is a powered treatment table designed for use by individuals with mobility disabilities or spinal cord injury. This treatment table has motorized height adjustment from wheelchair level, and a power backrest that adjusts from 0 to 75 degrees. Lifting/lowering is provided by two synchronized direct-drive lifts with hand controls. The table has a laminate frame and an extra-wide tabletop with a high-density urethane foam cushion and vinyl upholstery

Bariatric Lift Recliner (Model Mdr35B700V1)

The Bariatric Lift Recliner, model MDR35B700V1, is a recliner chair designed for use by individuals with mobility disabilities. This high-strength recliner has independent back and foot positionins with hand controls, an extra-wide head rest, and vinyl upholstery. Three separate motors control its operation. DIMENSIONS (HxW): 47 x 45 inches overall; the distance from the floor to the top of seat is 21 inches. When the chair is reclined, the distance required from the wall is 24 inches. The seat

Bariatric Multifold Portable Ramp (Models Bar536, Bar636, Bar736, & Bar836)

The Bariatric Multi-Fold Portable Ramp is a bariatric portable ramp designed to provide access for wheelchairs and scooters. This welded aluminum ramp separates into two pieces for carrying. The two ramp panels fold in half and are locked together with a closure strap, then carried like a suitcase. The ramp has an anti-slip surface for traction during use and a center joint hinge for strength. The ramp comes with a visual aid to determine if it is on a safe slope. DIMENSIONS (LxW): 5 x 3 feet (m

Bariatric Offset Cane

The Bariatric Offset Cane is an adjustable offset cane designed for use by obese individuals with mobility and balance disabilities. This cane features a heavy-duty steel shaft with aluminum locking nuts, double push-button adjustment, and a soft vinyl handgrip. SIZES: Standard or Extra Tall. DIMENSIONS: The height adjusts from 29 to 38 inches for the Standard size and 38 to 47 inches for the Extra-tall Size in 1-inch increments. CAPACITY: 500 pounds. COLOR: Black.

Bariatric Panel Ramp (Models Bpr348, Bpr448, Bpr548, & Bpr648)

The Bariatric Panel Ramp is a ramp designed to provide wheelchair or scooter access for individuals with mobility disaabilities or spinal cord injury. This ramp consists of three interlocking sections with an additional panel the can be used to increase ramp widths. The outside panel has curbing to keep the wheelchair or scooter in place while in use. The ramp is made of welded aluminum with an anti-slip high- traction surface suitable for all weather conditions, and can accommodate wheelchairs

Bariatric Perching Stool (Model 405)

The Bariatric Perching Stool, model 405, is an adjustable stool designed for use by obese individuals with balance or mobility disabilities. Equipped with a heat-sealed polyvinyl chloride padded seat this chair features tubular tensile steel back, tubular steel arms, an H-section for added strength, and four rubber tipped legs. DIMENSIONS (HxDxW): Seat is 20 to 26 x 12 x 20.25 inches. The footprint is 28 x 18 inches at the lowest position, and 29 x 18 inches in the highest position. The distance

Bariatric Perching Stool (Model 406)

The Bariatric Perching Stool, model 406, is an adjustable chair designed for use by obese individuals with balance or mobility disabilities. This chair has a padded back and tubular arms. The padding is made of heat-sealed polyvinyl chloride for additional comfort and the tubing is of high tensile steel. Additional features include an H-section for added strength. DIMENSIONS (HxDxW): Seat is 20 to 26 x 12 x 20.25 inches. The backrest is 340 to 140 millimeters. The footprint is 28 x 18 inches at

Bariatric Quad Cane

The Bariatric Quad Cane is an adjustable quad cane designed for use by obese individuals with mobility and balance disabilities. Available with a small or large base, this cane features a heavy-duty steel shaft with aluminum locking nuts and a soft vinyl handgrip. DIMENSIONS: The height adjusts from 29 to 38 inches in 1-inch increments. The small base is 6 x 8 inches and the large base is 8 x 12 inches. CAPACITY: 500 pounds. COLOR: Black.

Bariatric Raised Toilet Seat And Frame (Models 166, 166F, 166Hd &166Fhd)

The Bariatric Raised Toilet Seat and Frame, models 166, 166F, 166HD and166FHD, is a bariatric height adjustable toilet frame with elevated seat designed for use by heavy individuals with balance or mobility disabilities. The clip on and off contoured seat features a partial cut away at the front and rear. The plastic coated metal frame features rubber ferrules (models 166 and 166HD) or floor fixing flanges (models 166F and 166FHD) at the base of the legs. The entire frame can be positioned to st

Bariatric Seating (Models 7125, 7130, 7140, 7126, 7231 & 7141)

The Bariatric Seating chair, models 7125, 7130, 7140, 7126, 7231 and 7141, is a reinforced chair designed for use by individuals with obesity and mobility disabilities or by individuals who require support while sitting. The chair has a laminated wood frame, and seat and back platforms are removable. DIMENSIONS: Models 7125 and 7126 are 29 inches wide; models 7130 and 7131 are 34 inches wide; and models 7140 and 7141 are 44 inches wide. SEAT (DXW): 25 X 20 (models 7125 and 7126); 30 X 20 (models

Bariatric Shower Chair / Commode (Models Pvcm1305 & Pvcm1315)

The Bariatric Shower Chair/Commode is a shower commode designed for use by bariatric individuals with mobility disabilities. This combination shower chair and commode has a dual reinforced frame, four stainless steel bolts in the seat, and threaded-stem casters. A 10-quart commode slides out when not in use. Other features include anti-slip handgrips and a push/pull handle. Model PVCM1315 has a slide-out footrest. DIMENSIONS: Seat is 30 inches wide between armrests. CAPACITY: 700 pounds.

Bariatric Shower Commode Chair (Model 130-5)

The Bariatric Shower Commode Chair, model 130-5, is a shower chair and commode with casters designed for use by individuals with balance or mobility disabilities. The frame is made of PVC plastic with a commode seat, armrests, and six threaded stem casters. DIMENSIONS (HxLxW): Frame is 43 x 28 x 34 inches. The seat is 21 x 23 x 30 inches. The casters are 5 inches in diameter x 1.25 inches wide. CAPACITY: 700 pounds. COLOR: Frame is white.

Bariatric Shower/commode Chair (Model 720)

The Bariatric Shower/Commode Chair, model 720, is a shower chair designed for use by large individuals with lower extremity or mobility disabilities. FRAME (LxW): 42.5 (including footrest) x 26 1/8, 28 1/8, 30 1/8, or 32 1/8 inches. The chair has a stainless steel, rigid frame with push handles and anti-tippers. SEAT (LxW): 20 7/16 x 20, 22, 24, or 26 inches. A removable commode pan is included. CUSHION: Ensolite seamless seat and back cushions with full-width padded seat. ARMRESTS: Full-length,

Bariatric Stamford Grand Combi Scandia (Models 166 & 166F)

The Bariatric Stamford Grand Combi Scandia, models 166 and 166F, is a bariatric safety frame with raised toilet seat designed for use by individuals with balance or mobility disabilities. It has a sturdy, height adjustable, peel resistant plastic coated metal frame with a clip on, one-piece, molded antibacterial seat. The seat has a partial cut away at the front and rear to facilitate personal hygiene. The whole frame can be positioned over a toilet. The unit has rubber ferrules at the base of t

Bariatric Threshold Ramp (Models Btr 1636 & Btr 2436)

The Bariatric Threshold Ramp is an accesible threshold designed to make doorways accessible to individuals who use wheelchairs or scooters. This bariatric threshold ramp is made of lightweight aluminum with an anti-slip, high-traction sandpaper surface. It covers a threshold rise of 1.5 to 3 inches (model BTR 1636) or 2 to 4 inches (model BTR 2436), and comes with mounting holes and the hardware needed to secure it to the door molding. DIMENSIONS (LxW): 16 or 24 x 36 inches. CAPACITY: 800 pounds

Bariatric Transport Stretcher (Model Mph08S1190132)

The Bariatric Transport Stretcher, model MPH08S1190132, is a heavy-duty stretcher designed for use by individuals with mobility disabilities or spinal cord injury. This stretcher is intended specifically for transferring and transporting a bariatric individual. It has a reinforced frame, high-density foam mattress, full perimeter non-marring bumper, large casters, 3-position vertical side rails, and a hydraulic folwer back rest. It also has a beachwood powder-coat finish and is chrome plated. DI

Bariatric Travel Chair

The Bariatric Travel Chair is a lightweight wheelchair designed for individuals with limited or no lower body mobility. Chair is foldable has all terrain wheels and a maintenance free aluminum frame that won't rust. Features swing away footrests, seat belt, rear brakes, padded armrests, nylon seat and rear storage pouch.

Bariatric Wheelchair Cushion (Models Msc26320184, Msc26322184, Msc26324184, Msc26326184, & Msc26328184)

The Bariatric Wheelchair Cushion is a gel and foam seat cushion designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. The cushion is constructed with a gel pack placed between two layers of foam, and it has a Nylex cover. DIMENSIONS (HxLxW): 4 x 18 x 20 inches (model MSC26320184), 4 x 18 x 22 inches (model MSC26322184), 4 x 18 x 24 inches (model MSC26324184), 4 x 18 x 26 inches (model MSC26326184), or 4 x 18 x 28 inches (model MSC26328184). CAPACITY

Bariatric Wood Cane

The Bariatric Wood Cane is a straight cane designed for use by obese individuals with walking or balance disabilities. Made of hardwood, this cane has an offset inverted L-style handle. The cane can be cut to the desired length. DIMENSIONS: Up to 44 inches long. CAPACITY: 500 pounds. COLOR: Black or walnut.

Barney (Model 5126)

Barney, model 5126, is a switch operated toy designed for use by children with upper extremity, cognitive, or mobility disabilities. By activating a connected capability switch (required but not included), a child can listen to Barney, the purple dinosaur, happily sing his favorite song, “I Love You”. POWER: Uses two AA batteries (not included). DIMENSIONS (HxDxW): 6 x 2 x 5 inches. WEIGHT: 0.05 pounds.

Barrett (Models 7 & 10)

The Barrett 7 and 10 models are adult manual wheelchairs designed for people with lower extremity or mobility disabilities or spinal cord injury. They are suitable for indoor and outdoor use and can be folded into a smaller size. The Barrett 7 is designed to be manually propelled by the user while the Barrett 10 can only be propelled from behind by an attendant. A wide range of accessories and upholstery is also available for these hand-built chairs that feature an easy to clean durable chrome f

Barrett Baby

Baby Barrett is a child's wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. This folding wheelchair can be attendant- or self-propelled and comes with a document pocket and a user manual. FRAME: Folding frame with a chassis color choice of rich claret, electric red, navy blue, black, silver, or chrome. Anti-tip rollers/levers are optional. SEAT (LxW): 10 x 12, 11 x 12, 12 x 13, or 13 x 13 inches. An adjustable waist belt

Barrett Combi (Models 8 & 9)

The Barrett Combi, models 8 & 9, are adult wheelchairs designed to provide the user with the chair best suited to his/her individual needs and comfort. FRAME: 29 x 30 x 12 inches (Combi 8); 29 x 26 x 12 inches (Combi 9) folded sizes; tubular alloy steel, full gloss stove finish. SEAT: 17 x 17 inches for both models. ARMRESTS: Detachable for tray usuage with molded arm pads. BRAKES: Lever assembly. WHEELS: Combi 8 (22 inch); Combi 9 (12.5 inch). CAPACITY: 226 pounds for both models. WEIGHT: C

Barrett Gem

The Barrett Gem is a powered wheelchair designed to provide the user with the chair best suited to his/her individual needs and comfort. FRAME: 22 x 30 x 14 inches folded size; tubular steel, chronium plated. CONTROLS: Joystick - fully programmable for speed/acceleration and can be supplied with remote, chin, or attendant control capabilities. SEAT: 14 x 16 / 15 x 16 / 17 x 17 inch. ARMRESTS: Detachable for tray usuage with molded arm pads. BRAKES: Electro-magnetic. WHEELS: 7 inch or 12.5 inch a

Barrett Maxi

The Barrett Maxi is a self-propelled adult wheelchair ergonomically suitable for a larger stature user. FRAME: 29.5 x 29 x 12 inch folded size; tubular alloy steel; full gloss stove finish. SEAT: 18 x 16 inches. ARMRESTS: Detachable for tray usuage with molded pads. BRAKES: Lever assembly. WHEELS: 24 inch pneumatic tyre. CAPACITY: 252 pounds. WEIGHT: 41 pounds. Several accessories are also available.

Barrett Meteor

The Barrett Meteor is a lightweight, sports wheelchair designed for everyday and leisure pursuits. FRAME: 28 x 27 x 9 inches folded size; tubular alloy steel; full gloss stove finish. SEAT: 16 x 16 inch. BRAKES: Lever assembly. WHEELS: 24 inch. CAPACITY: 224 pounds. WEIGHT: 31.5 pounds. Several accessories are also available.

Barrier Free Bathtub

---- PROTOTYPE --------- PURPOSE: To design a prototype of a barrier free bathtub for older adults or people with balance, lower extremity or mobility disabilities. The Barrier Free Bathtub has collapsible side walls to facilitate entry and exit of the tub. When entering the bath, the user sits down like sitting on a bed then moves his or her legs into the bathtub. The user then moves a switch located adjacent to the faucets to raise the tub walls. Once the walls are in place, the tub can be fil

Barrier Free Lift Unilift Ceiling Lift

The Barrier Free Lift Unilift Ceiling Lift is an overhead transfer lift designed for use with individuals with mobility disabilities. Available with a ceiling-mounted track or free-standing frame, this unit permits a horizontal change of direction to be performed by hand or with a motor. The transverse track system uses two tracks: one track is installed the entire length of the room and the other is a perpendicular track installed the entire width of the room. The lift can move on either track

Barrier Free Shower (Model 3Lrs4848B22B)

The Barrier Free Shower, model 3LRS4848B22B, is an accessible shower stall designed for wheelchair users. This three-piece shower stall is made of plywood-backed fiberglass, and has two walls and a center-drain shower pan with a low threshold. The stall has a polyester gelcoat smooth tile finish. OPTIONS: Shower valve; glide bar/hand shower; seat; grab bars; collapsible water stopper; drain; curtain and rod; amd tile accents. DIMENSIONS (HxDxW): 79 x 49 x 49 inches. Threshold curb height is 2.25

Barrier Free Shower Floor Ramp (Model Bf-1260)

The Barrier Free Shower Floor Ramp, model BF-1260, is a shower ramp designed to make a shower accessible to a wheelchair. The unit coordinates with Swanstone shower and bath systems. This ramp has a slip-resistant surface, and on its reinforced solid surface, color and texture run all the way through and cannot wear away. DIMENSIONS (DxW): 12 x 60 inches. COLOR: Available in 37 different colors.

Barrier Free Shower Floor Ramp (Model Fbf-1260)

The Barrier Free Shower Floor Ramp, model FBF-1260, is a shower ramp designed to make a shower accessible to a wheelchair. The ramp is made of Veritek, and it can be installed without grout. This unit coordinates with the Swanstone shower and bath systems. DIMENSIONS (DxW): 12 x 60 inches. COLOR: Bisque, bone, or white.

Barrier Free Shower Pan

The Barrier Free Shower Pan is a wheelchair accessible shower pan designed for use in building roll in showers. It comes with an integrated drain on the left, right, or center; splash walls; and a barrier-free and/or Americans with Disabilities Act (ADA) compliant entrance. The leak-proof shower pan surface accepts tile directly without liners, mudding, or hot mopping. The pan comes with a round, polished adjustable drain plate. OPTIONS: Square drain plate. DIMENSIONS (DxW): With center drain, 3

Barrier Free Water Dam

The Barrier Free Water Dam is a water dam for showers designed to provide access to a roll-in shower by wheelchair and rolling shower chairs users while containing water. The soft vinyl dam is flexible for wheelchairs to roll over and then return to an upright position. It can be used in conjunction with a shower curtain to keep water in the shower area. The vinyl dam, made of poly-vinyl chloride, fits into an anodized and polished aluminum threshold. Installation requires a hack saw, measu

Barrier-Free Grab Bar (Models Bf-2448 & Gb-1432)

The Barrier-Free Grab Bar is a shower grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities or arthritis. This L-shaped stainless steel grab bar is for use when a shower seat is installed on either side. DIMENSIONS: 14 x 32 inches (model GB-1432) or 24 x 48 inches (model BF-2448).

Barrier-Free Grab Bar (Models Bf-5024 & Bf-5048)

The Barrier-Free Grab Bar is a wall grab bar for shower designed for use by individuals with balance or mobility disabilities. This straight stainless steel grab bar can be used on side walls when a shower seat is installed on the back wall of a shower. DIMENSIONS: Length is 24 inches (model BF-5024) or 48 inches (model BF-5048).

Barrier-Free Shower Floor With Entry Ramp (Model 360)

The Barrier-Free Shower Floor with Entry Ramp is a roll-in shower designed for use by individuals who use wheelchairs or walkers. The curbless floor and entry-ramp system can replace an existing bathtub, is designed for wheelchair access and is slip-resistant. Its offset drain placement (similar to that of a bathtub)in right- or left-hand configutation provides convenient installation or retrofit. The floor is made of molded fiberglass with resistance to mold, mildew and stains and a semigloss

Barton Little Milli Bathing System

The Barton Little Milli Bathing System is a walk-in bathtub designed for use by individuals with physical or cognitive disabilities. This system allows the user to bathe independently within a safe, secure, and hygienic environment. Its compact design allows it to be a free-standing unit or built into a tub enclosure. Tub fill is thermostatically controlled to prevent scalding. A side door provides step-in access, or the user can be transferred into the tub. OPTIONS: Whirlpool; lifter access cut

Base Mate Modular Adaptive Seating System

Geriatric chair on wheeled based for persons ranging from 4 feet 2 inches to 6 feet 4 inches in height. Anterior wedged seat, seat depth adjustable 15 inches to 21 3/4 inches in 3/4 inches increments, lower back section is 11 1/2 inches high. Upper back section comes in three sizes. Quick release side support panels, angle adjusters to adjust seat to back angle, quick-release contoured headrest, and safety belt. Four casters, two with locks.

Basement Motorhome Lift (Model 129)

The Basement Motorhome Lift, model 129, is a wheelchair lift without a platform for use on high floor motorhomes and buses with a floor height between 34 and 51 inches. Instead of a platform to support the chair, manual and powered wheelchairs and their occupants are raised and lowered by means of a pivoting arm and a vertical track. The lift requires only 9.5 inches of wall space inside. The lift will not interfere with other people entering the vehicle. Chains with webbed strapping attach onto

Basket For Wheelchair

CUSTOM ADAPTATION PURPOSE: To enable individuals with mobility disabilities to shop and carry items. Designed for use on a variety of wheelchairs, the adaptation consists of a commercially-available plastic-coated wire basket that fits against the back of the chair between the rear wheels. The basket is secured to the chair with octopus straps to enable removal when not in use but keeping the basket from swinging when on the chair. TITLE: In the Basket. JOURNAL: TAD Journal. REF: Vol. 21 no. 2,

Bath And Shower Seat

The Bath and Shower Seat is a bath seat designed for use by individuals with spinal cord injury or mobility or balance disabilities. Available with or without a back rest, the seat has a heavy-gauge aluminum frame with height-adjustable legs with non-skid rubber tips and a molded, textured polyethylene seat with drainage holes. The backrest is made of the same material as the seat. Both the backrest and seat have a handhold slot to aid in transfers. The seat has a wide base for added stability.

Bath Bather

Baby Bather is designed for use by infants and toddlers who required additional support during bathing activities. The Baby Bather is designed to fit on the base of the bathtub. The Bather holds the baby securely allowing you to concentrate on washing using two hands. Made from hygienic polypropene with a soft PVC mattress, the Bather has an adjustable backrest for ease of positioning on the bath. DIMENSIONS: Backrest length: 480 millimeters, seat Length 200 millimeters, backrest width 360 milli

Bath Board (Model 09200)

The Bath Board is a bathboard designed for use by individuals with balance disabilities or lower extremity disabilities who require support while bathing. The Bath Board attaches securely to most bathtubs. The board is equipped with rubber-covered clamps to secure it to the tub and they resist slipping and protect surfaces from scratching. It has a built in soap holder. OPTIONS: Safety handle sold separately. DIMENSIONS: The width adjusts from 17.75 inches to 28 inches. CAPACITY: 250 pounds. CO

Bath Cape

The Bath Cape is a woman’s robe designed for use by individuals with mobility or other physical disabilities. This terrycloth bath cape features a stand up mandarin collar, front Velcro closures, two front pockets, and oversized arm openings. COLOR: White.

Bath Cape With Hood (Model 031)

The Bath Cape with Hood, model 031 is a men's or women's robe designed for individuals with mobility or physical disabilities. This long-sleeved terry cloth bath cape is cut generously in the front for complete coverage and cut higher in the back for seated wear. This garment is helpful for after showering for drying, for warmth, and for waiting to transfer. SIZE: One size fits all. COLOR: White

Bath In Bed (Model Bb-1) & Portable Bath In Bed (Model Pbb-1)

The Portable Bath in Bed, model PBB-1, is a bed shower designed for use by individuals with mobility or severe physical disabilities. This system consists of a soft, flexible under liner surrounded by a lightweight, collapsible aluminum frame that supports the liner to create a bathtub; a shower unit with an electric pump to dispense water with the capacity to provide one continuous 10.5-minute shower; a flexible hose that connects to the under liner and the included waste water collection bottl

Bath One Shower Commode Chair (Model 7200)

The Bath One Shower Commode Chair, model 7200, is a commode chair designed for use by individuals with balance, mobility, or lower extremity disabilities. The unit features a molded plastic seat and back, aluminum legs, and bucket with lid. ASSEMBLY: Complete assembly includes snapping the back and legs in place. For carrying or storage, the legs and back can be clipped onto the anti-slip seat. OPTIONS: Attachable armrest and urine splash cup. DIMENSIONS (HxLxW): 20.5 x 18.5 x 4 inches. CAPACIT

Bath Pillows

Bath Pillows are pillows designed to be used as a neck and head support for individuals with upper extremity or mobility disabilities while bathing. The pillows are designed in straight and curved shapes and easy to clean. DIMENSIONS (HxLxW): 7 x 16 x 7 inches.

Bath Platform Step (Model 604)

The Bath Platform Step, model 604, is a bathtub access stair designed for use by individuals with arthritis or mobility or balance disabilities. The wooden step is made of birch with non-slip cork top and is designed to make getting in and out of the bath easier by reducing the distance from the floor to the top of the bathtub. DMENSIONS: The step is 6 inches high (152 millimeters). CAPACITY: 140 kilogram.

Bath Safety Toilet Safety Bar (Model 575)

The Bath Safety Toilet Safety Bar, model 575, is a grab bar for toilet designed for use by individuals with balance or mobility disaibilies. This unit provides handles on both sides for use in getting on and off the toilet. Made of molded plastic tubing, it comes with adjustable mounting clamps and fits most standard and elongated toilets. DIMENSIONS (HxDxW): 8.5 x 23 x 18 inches. The tubing is 1 inch in diamter. CAPACITY: 250 pounds. COLOR: White.

Bath Seat

CUSTOM ADAPTATION PURPOSE: To provide proper positioning for a child with multiple disabilities, including cerebral palsy and lung disease while bathing. This "Fogarty" style seat has a molded plastic seat mounted in a frame made of plastic pipe. It is equipped with a pelvic belt and a T-bar to hold the child in place. TITLE: All in the Family. JOURNAL: TAD Journal. REF: Volume 25, Number 4, Summer 2005. PAGES: 12-14. Number of pages: 4 (including cover).

Bath Seat (Model 1880A)

The Bath Seat, model 1880A, is a bathtub seat designed for use by individuals with balance or mobility disabilities. This tip-up bath seat has teakwood slats on a brass frame. Installed on the bathtub wall, it can be folded up to the wall when not in use. The seat comes with mounting brackets and screws. DIMENSIONS (DxW): Seat is 12.75 x 18.75 inches. When up, the seat projection is 2.5 inches. CAPACITY: 400 pounds. COLOR: The frame is available with a with a stainless steel, chrome, polished n

Bath Seat Farnham With Moulded Plastic Seat (Model 09-107-3113)

The Farnham Bath Seat with Moulded Plastic Seat, model 09-107-3113, is a bath seat designed for use by individuals with balance or mobility disabilities. This seat hangs from the rim of the bath and wedges firmly into the sides as the bather sits on it. The strong contoured seat is mounted on a steel frame with hinged sides. The seat is adjustable in width for different sizes of bathtub. The tips of the frame are covered in soft end caps to protect the bath and improve grip. OPTIONS: Padded viny

Bath Steps For Child With Angelman Syndrome

CUSTOM ADAPTATION PURPOSE: To provide customized bath steps for a child with Angelman Syndrome. To assist the child’s mother with reducing lifting and relieving back strain from assisting her daughter in getting into the bath, a step-stool with a rail on one side was designed. A 19-millimeter piece of steel tubing was used for the frame, and was painted with white enamel. The stool has a 720-millimeter high hand rail on one side, and no rail on the other side. No railing on one side allows the

Bath Transfer Stool

CUSTOMIZED ADAPTATIONPURPOSE: To create a custom adaptation for an individual with mobility disabilities to transfer into and use a shower in private and unaided while being able to fully close a sliding shower door. A piece of cedar was fastened to the legs of a bathtub chair using four stainless steel hose clips. A two-legged stool was constructed using half-inch MDF for the side plates and seat and spruce wood for the legs and leg braces. The two legs rest on the floor of the bathroom, and no

Bath+Safe Deluxe Tub Safety Rail (Model F72716-4000)

The Bath+Safe Deluxe Tub Safety Rail, model F727216-4000, is a clamp-on grab bar for bath tub designed for use by individuals with balance or mobility disabilities. This rail features a large base with an easy-to-grasp non-metal A-shaped handle. The base clamps over the edge of the tub and tightens with a large T-shaped knob. Rubber pads inside the base protect the tub from scratches. DIMENSIONS: The rail is 14.75 inches high and fits tubs 3 to 7 inches thick.

Bath+Safe Elevated Toilet Seat With Arms (Models F725753210 & F725753310)

The Bath+Safe Elevated Toilet Seat with Arms, models F725753210 and F725753310, is a molded elevated toilet seat designed for use by individuals with mobility or balance disabilities or arthritis. Available for standard (F725753210) and elongated (F725753310) toilets, the unit has integrated, molded armrests and uses the existing toilet seat once installed. DIMENSIONS: 3.5 inches tall. Width between arms is 21 inches is the standard model or 21.5 inches in the elongated model. CAPACITY: 300 poun

Bath+Safe Lock-On Elevated Toilet Seat (Models F725753100 & F725753110)

The Bath+Safe Lock-On Elevated Toilet Seat, models F725753100 and F725753110, is an elevated toilet seat designed for use by individuals with lower extremity disabilities. The unit has a locking mechanism that secures it to the toilet for stability. Openings in the front and back allow for easy access. Model F725753110 has arms that provide support while getting on and off the toilet. DIMENSIONS: Five inches high. Width between arms is 19 inches. CAPACITY: 300 pounds.

Bath+Safe Swirl Grip Designer Grab Bars (F72460 Series)

Bath+Safe Swirl Grip Designer Grab Bars, F72460 series, are wall grab bars designed for use by individuals with balance and mobility disabilities. These bars have a swirl texture for a non-slip grasp, even when wet. Diamond-shaped mounting brackets conceal the installation screws. Mounting hardware is included. DIMENSIONS: Available in 12, 16, 18, and 24 inches long. All bars are 1.25 inches in diameter and extend 1.5 inches from the wall.

Bath-Buddy Inflatable Bath Lift

The Bath-Buddy Inflatable Bath Lift is a pneumatic bath lift designed for use by individuals with lower extremity or mobility disabilities or arthritis. The unit consists of an inflatble cushion that fits in a bathtub, a hose that attaches to the side of the cushion, an air pump, and a remote control. The inflatable cushion has a non-slip seat with lumbar suppport, and attaches to the bottom of the tub with four large suction pads. The user sits on the seat on the inflated air cushion in the bat

Bath-O-Matic Hydrocushion

The Bath-O-Matic Hydrocushion is a water inflatable cushion used as a bath lift that connects to the tub faucet or shower head, designed for those who have difficulty standing. The cushion is placed in the tub and filled with warm water. After transfering to the cushion, the valve on the cushion is opened and the cushion deflates, filling the bathtub with water. After bathing, water is drained from the tub and the cushion is refilled with water, returning person to elevated sitting position. The

Bathcrest Walk-Thru Insert

The Bathcrest Walk-Thru Insert is a bathtub insert designed for use by individuals with arthritis or balance, lower extremity, or mobility disabilities. This insert, which fits most bathtubs, lowers the barrier to bathtub entry and converts the bathtub into a walk-through shower with an entranceway close to the height of normal steps.

Bathing Frame

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted bathing frame for a child with hyptonia, epilepsy, and paralysis. A parent with a child with disability was having difficulty lifting her child out of the bath and was having back problems as a result. The child was very difficult to lift out of the bath as his limbs are very floppy and he cannot hold his own head. A new bath support design was based on an original bath created for another person, making the frame construct

Bathmaster Classic

The Bathmaster Classic is a powered bath lift designed for use by individuals with spinal cord injury or mobility or balance disabilities. The Bathmaster features a folding epoxy-coated aluminum frame with a carrying handle, a flame- and mold-resistant padded seat and backrest, and large feet with suction cups to secure the unit to the bathtub. Lift-up tabs on the suction cups provide for ease in placing and removing the unit. The hand controller utilizes broad pressure pad switches to raise and

Bathmaster Sonaris

Bathmaster Sonaris is designed to assist users with limited mobility and balance as well as their caregivers during transfers in and out of the bathtub. The Bathmaster Sonaris is operated by a rechargeable battery and can perform an average of 18 lifts per charge. There is an audible beep and a blinking light to alert you when the battery needs to be recharged. The operator buttons on the hand controller are simple and large to make it easy for anyone to operate. The seat and back snap together

Bathroom Ceiling Lift

DO-IT-YOURSELF-ENTRY --- PURPOSE: To enable a person who uses a wheelchair to make transfers in the bathroom. A U-shaped channel runs through the ceiling and is supported by the rafters. Operated by a 440-pound hoist motor, the figure-eight-shaped system enables the user to go backward, forward, right, or left. The lift, equipped with a transfer lift sling, swivels to allow changes of direction. . MATERIALS: Channel, cables, controller, motor, and lift sling. TOOLS: Shop tools. SKILLS REQUIRED:

Bathroom Gem Floor Toilet

The Bathroom Gem Wedge Toilet is a floor toilet designed for use by individuals who use catheters and leg bags. Intended to assist in independent management of leg bag emptying, this stainless steel toilet sits flush with floor and can be installed in any convenient location selected by the individual; it is designed to fit easily between the floor joists in most homes. The flushing mechanism is activated by an electronic sensor when a wheelchair is moved over the unit and ceases when a wheelch

Bathroom Gem Spring Leg Bag Release System

The Bathroom Gem Spring Leg Bag Release System is a leg bag emptier designed for use by individuals who use urinary leg bags. This mechanical device does not come in contact with urine, eliminating the need for daily cleaning. The leg bag's tubing is crimped by a spring-driven cylinder to stop liquid from leaving the bag. An easy-to-use lever, which can be mounted anywhere on a wheelchair that is convenient for the user, draws a cable to pull the cylinder away from the tubing, allowing liquid to

Bathroom Gem Wedge Toilet

The Bathroom Gem Wedge Toilet is a floor toilet designed for use by individuals who use catheters and leg bags. Intended to assist in independent management of leg bag emptying, this stainless steel toilet sits on the floor and can be installed in any convenient location selected by the individual; special installation is not required and it can be moved from one location to another. The flushing mechanism is activated by an electronic sensor when a wheelchair is moved over the unit and ceases w

Bathroom Grab Bar (Models 410085, 410086, 410087, 410088, 410090, & 410091)

The Bathroom Grab Bar are wall mounted grab bars designed for use by seniors and individuals with physical disabilities. These bars are made of stainless steel with an exposed screw mount. DIMENSIONS: Length is 9 inches (model 410085), 16 inches (model 410086), 18 inches (model 410090), 24 inches (model 410087), 32 inches (model 410088), or 36 inches (model 410091). Diameter is 1.25 inches (models 410090 and 410091) or 0.88 inches (models 410085, 410086, 410087, 410088, 410090, and 410091). COLO

Bathroom Grab Bars

The Bathroom Grab Bars are wall grab bars designed for use by individuals with balance or mobility disabilities. Available in straight, right angle, or left angle models, these heavy-gauge steel bars provide additional support for sitting, standing, or transferring. Hardware for installation is included. DIMENSIONS: The straight models are available in 12, 16, 18, 24, or 32 inches long. The angled models are 24 x 16 inches. CAPACITY: 250 pounds. COLOR: Chrome or white.

Bathseat (Model 1720 & 1720D)

The Bathseat is a bath seat designed for use by bariatric individuals with lower extremity, mobility, or balance disabilities. Designed for use in standard bathtubs, this seat has an anodized aluminum tubular frame, double tubed for strength and a commode-style seat. A silicone seal prevents mildew and rust and vinyl cushions prevent marring of the tub. OPTIONS: Floor stand for use in shower. DIMENSIONS (WxDxH): 15.25 x 20 x 18.5 inches. The tub must be 22 inches wide at the center. CAPACITY: 8

Bathtub Grab Bar

The Bathtub Grab Bar is a grab bar for bathtub designed for use by individuals with balance and mobility disabilities. This U-shaped bar features a wide clamp base that fits over the edge of the tub. A screw clamp adjusts the width for a secure fit. DIMENSIONS: The unit fits tub walls 3 to 7 inches thick. The bar is 19.5 inches tall and extends 14.75 inches above the tub. The width adjusts from 8 to 11.5 inches.

Bathtub Rail With Chrome Finish

The Bathtub Rail with Chrome Finish is a grab bar for the bathtub designed for use by individuals with mobility disabilities. The rail provides the individual with support while moving into or out of the bathtub. The rail clamps to the tub with adjustable spring steel clamps lined with rubber pads to protect the tub. DIMENSIONS (HxDxW): 7 x 0.75 x 11 inches. The clamp adjusts from 3.5 to 6 inches in unlimited increments. COLOR: Chrome finish.

Bathtub Safety Mat (Models 1177 & 1177A)

The Bathtub Safety Mat is a bathtub mat designed for use by individuals with balance or mobility disabilities. Hundreds of suction cups anchor the mat to the bottom of the tub to provide a slip-resistant surface while bathing. SIZES: Medium (model 1177) or large (model 1177A). DIMENSIONS (LxW): 15.75 x 27.5 inches (medium) or 15.75 x 35.5 inches (large). COLOR: White.

Bathtub Safety Rails (Models 1240, 1250, 1255, 1260, & 1265)

Bathtub Safety Rails are bathtub grab bars designed for use by individuals with balance or mobility disabilities. Made from powder-coated steel (models 1250 and 1255), plastic (models 1260 and 1265), or a composite material (model 1240), these rails provide added stability when getting in and out of the bathtub. Models 1240, 1250, 1255, and 1260 have two grip handles, including a lower one that allows for a seated grip position. Model 1265 has one grip handle. The rails attach to the tub sides w

Bathtub Safety Rails (Models H100, H200, H250 & H300)

The Bathtub Safety Rails are grab bars for bathtubs designed to provide stability for individuals with physical or neurological disabilities while bathing or transferring. Model H100 is made of steel with a white polyester coating. Models H200, H250 and H300 are made of chrome-plated steel. The mounts are coated with soft plastic brushing. DIMENSIONS: Model H100 - 5.74 x 14.75 inches; Model H200 - 11.75 x 11 inches; Model H250 - 16 x 14.75 inches; Model 300 - 18 x 6 inches. WEIGHT: Model H100 -

Bathtub Transfer Benches (Models A830-32, A830-3, A830-30, & A830-31)

The Bathtub Transfer Benches are bath seats designed for use by individuals with spinal cord injury, mobility disabilities, or balance disabilities. All models have heavy-gauge aluminum frames with height-adjustable legs with rubber tips and an aluminum armrest/side rail. All models also have contoured back rests which can be attached on the right or left side. Model A830-32 has a waterproof padded vinyl seat; model A830-3 has a molded-plastic, slip-resistant seat with drainage holes; model A830

Battery Booster, The

Boost charger for 24 volt electric wheelchairs. Charges chairs from 12 volt supply; cigarette lighter adapter, automotive battery chargers, etc. Can also be used to operate 12 volt accessories from wheelchair batteries. Can fully charge batteries in 3 to 4 hours; however, designed to give quick "boost" charge while driving or sitting. Installs on wheelchair. Some vehicle adaptation may be necessary. Size 5 by 2.5 by 1.5 inches; weight less than 1 pound.

Baylift

BayLift is a bus lift designed for use by individuals with mobility disabilities. This compact lift is contained in an enclosure in the luggage bay of the bus. Constructed of steel, the system uses an electro-hydraulic lift with manual backup (hand pump for up, pressure release valve for down). DIMENSIONS (HxLxW): Enclosure is 37 x 18 x 38 inches. Maximum usable platform area is 48 inches long x 29 inches wide. Maximum floor to ground travel is 62 inches. CAPACITY: 600 pounds. WEIGHT: 590 pound

Bci Grab Bars

BCI Grab Bars are wall grab bars designed for use by individuals with balance, mobility, or lower extremity disabilities. These grab bars can be mounted vertically, horizontally, or on an angle. DIMENSIONS: 16 or 24 inches long. COLOR: White, almond, biscuit, or gray.

Bci Walk-Thru Insert

The BCI Walk-Thru Insert is a bathtub insert designed to convert a standard bathtub into a walk-in shower tub accessible to individuals with balance, lower extremity, or mobility disabilities or arthritis. COLOR: White.

Bcw 600 Wide Wheelchair

The BCW 600 Wide Wheelchair is a folding manual wheelchair designed for use by large adults. FRAME: Stainless steel folding frame with a baked urethane finish to ensure chip, scratch, and fade resistance. A double X-brace and 4 point telescoping at each corner to strengthen design are standard. The chair folds to 13 inches for transport and storage. A rigid frame is available. Black is the standard frame color; red, teal, silver, and charcoal chrome are available at an extra charge. Anti-tippers

Bcw Advantage (Models Bcwad22, Bcwad24, Bcwad26 & Bcwad28)

The BCW Advantage is an adult manual wheelchair designed for obese individuals with mobility disabilities. FRAME (WxDxh): Model BCWAD22 is 29 x 32 x 39 inches; model BCWAD24 is 31 x 32 x 39 inches; model BCWAD26 is 33 x 32 x 39 inches; and, model BCWAD28 is 35 x 32 x 39 inches. The blue heavy-duty stainless-steel frame features push handles, double crossbraces and four-point telescoping for strength and folds to 13 inches. Anti-tips are optional. SEATS: The standard seat is 20 inches deep and 20

Bcw Power Wheelchair (Models Bcwpr 2018, Bcwpr 2218, Bcwpr 2418 & Bcwpr 2618)

The BCW Power Wheelchair is a powered wheelchair designed for use by obese persons with mobility disabilities. FRAME (WxDxH): Model BCWPR2018 is 27.5 x 40 x 41 inches; model BCWPR2218 is 29.5 x 40 x 41 inches; model 2418 is 31.5 x 40 x 41 inches; and, model BCWPR 2618 is 33.5 x 40 x 41 inches. All models have a heavy-duty, stainless-steel rigid frame with a baked urethane finish to resist chipping, scratching, and fading. The frame comes standard in black. Red, teal, silver, and charcoal chrome

Bcw Recliner (Models Rcbc2018, Rcbc2218, Rcbc2418 & Rcbc2618)

The BCW Recliner is a manual wheelchair with a powered reclining back designed for use by obese persons with mobility disabilities. FRAME: Heavy-duty, stainless-steel frame with double crossbraces. The frame features a baked urethane finish to resist chipping, scratching, and fading. The standard frame is black; red, teal, silver, and charcoal chrome are available at an extra charge. Model RCBC2018 is 28 inches wide by 42 inches deep; models RCBC2218 is 30 inches wide x 42 inches deep; and RCBC2

Beach Access Chair

The Beach Access Chair is a beach wheelchair designed for use by individuals with mobility disabilities. This sturdy lightweight all- terrain chair a can be used in sand, snow, and other soft soils. The chair comes standard with an umbrella and storage bag. FRAME: White PVC plastic frame disassembles into three pieces for transport. The frame is 34.5 inches wide. SEAT: Seat height is 25 inches. A safety belt is included. CUSHION: Included. ARMRESTS: Included. BRAKES: Single motion park brakes.

Beach Baby All Terrain Stroller (Model Bbs 100)

The Beach Baby All Terrain Stroller, model BBS 100, is a stroller designed for use by children with mobility disabilities. FRAME (WxHxL): 35 x 39 x 43 inches. The white PVC tubular frame folds for storage and transport. All hardware is stainless steel. SEAT: A reclining seat with a seatbelt is included. The stroller also features an underseat storage area. UPHOLSTERY: Mesh sling upholstery. Three wheels with aluminum axles and 12 x 6 inch balloon tires by Roleez Wheels, Inc. (see separate entry)

Beach Cruzr & Beach Cruzr 4 Two

The Beach Cruzr and the Beach Cruzr 4 Two are powered beach wheelchairs designed for use by individuals with mobility disabilities. The Beach Cruzr is an aluminum beach chair mounted on four wheels that can be used on sand. The Beach Cruzr 4 Two is also mounted on four wheels and can be used on sand, and in addition it features two seats. FRAME (LxWxH): Both chairs have a folding aluminum frame, stainless steel hardware, and an extended foot area to allow the user's legs to be stretched in front

Beach Econo Kit

The Beach Econo Kit is a kit for converting a wheelchair or stroller into an all-terrain wheelchair or stroller designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury. The kit consists of four balloon wheels from Roleez Wheels, Inc. (see separate entry), two pre-drilled anodized axles, u-bolts, and wheel clips. To mount, the rear wheels are popped off, the axle tubes are slid across the frame and bolted on, and the balloon wheels are slid

Beach Hippocampe

The Beach Hippocampe is a three-wheeled beach and all-terrain wheelchair designed for use by individuals with mobility disabilities. FRAME: The frame is available in small, medium, large, and extra-large. The small frame is 46 inches long, the medium frame is 50 inches long, the large frame is 54 inches long, and the extra-large frame is 62 inches long. Folded dimensions (HxL) are 15 x 45 inches for the small frame, 15 x 49 inches for the medium frame, 15 x 53 inches for the large frame, and 15

Beach Stroller

The BeachStroller is a stroller designed for use by children with lower extremity disabilities, mobility disabilities, and spinal cord injury. The stroller is lightweight and collapsible, and uses all-terrain Roleez Balloon Tires from Roleez Wheels, Inc. (see separate entry). OPTIONS: Storage compartment; cup holder; umbrella. DIMENSIONS (HxLxW): 36.5 x 40.5 x 31 inches. CAPACITY: 75 pounds. WEIGHT: 26 pounds.

Beach Wheelchair

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To design and build a lightweight, portable wheelchair adaptation for individuals with mobility disabilities to enjoy the beach. The Beach Chair is created by rolling up two half shells which are 5 inches wide to the diameter of the wheelchair wheels (in this case 24 inches). These were created using ¼ inch aluminum but lexan plastic is also suggested. On end of each shell has a lip overlap to ensure the two halves line up and fight snugly. Each half

Beachrings2

Beachrings2 is a ground retention grid system for use on sandy areas to allow access over loose sand by pedestrians, wheelchair or scooter users, and other individuals with special ambulatory requirements. The tile material is made of injection molded Low Density Polyethylene (LPDE) consisting of very strong rings projecting from one side of a flexible grid and perforated membrane layer with slightly raised traction discs. Units can be linked together with integral posts and holes and either per

Beam N Read Led 6 Hands Free Night Vision Light With Four Filters (Model Bnr Led 6 W4F)

The Beam N Read LED 6 Hands Free Night Vision Light, model BNR LED 6 w4F, is a battery-operated lamp designed for use by individuals with low vision, mobility, or upper extremity disabilities. This versatile light is worn around the neck with the included adjustable neck strap to provide steady, hands-free lighting for night work and activities. The light also provides personal space lighting for walking or wheeling a wheelchair in the dark and during power outages. The light is turned on and of

Beam N Read Led 6 Deluxe Hands Free Light (Model Bnr Led 6-3)

The Beam N Read LED 6 Deluxe Hands Free Light, model BNR LED 6-3, is a battery-operated lamp designed for use by individuals with low vision, mobility, or upper extremity disabilities. This versatile light is worn around the neck with the included adjustable neck strap to provide steady, hands-free lighting for reading, crafts, and other personal tasks. The light also provides personal space lighting for walking or wheeling a wheelchair in the dark and during power outages. The light is turned o

Beamer Personal Transport Vehicle

The Beamer Personal Transport Vehicle is a powered wheelchair alternative designed for use by individuals with lower extremity disabilities or people who lack stamina. The Beamer is an electric transportation device on which the user stands when in motion. 500 watt motors in the hub of each of the two front wheels power this device. It has a horn, brake light, turn signals, and tail light. The vehicle has two back wheels for added stability, reinforced steel rider platform with high-impact plas

Beamz

Beamz is an interactive music system that can be used by individuals with upper extremity, neurological and cognitive disabilities. It is a musical instrument that enables special needs users and individuals of all ages to interactively create and play music. User’s pass their hands through the laser beams to trigger music, vocals or sound effects. The Beamz interactive music song library contains 50 songs. DIMENSIONS: 21 1/2" L x 4 1/2" W x 19 1/2" H. WEIGHT: 10 lbs. COLOR: Black. WARRANTY/GUAR

Beamz Education Bundle

Beamz Education Bundle is an interactive music system that can be used by individuals with upper extremity, neurological and cognitive disabilities. It is a musical instrument that enables special needs users and individuals of all ages to interactively create and play music. Users pass their hands through the laser beams to trigger music, vocals or sound effects. The Education package includes 50 songs and 10 lessons for education and therapy settings. The Education package includes the Beamz l

Beamz Family Play Bundle

The BeamZ Family Play Bundle is an interactive music system that can be used by individuals with upper extremity, neurological and cognitive disabilities. It is a musical instrument that enables special needs users and individuals of all ages to interactively create and play music. Users pass their hands through the laser beams to trigger music, vocals or sound effects. The Family Play Bundle includes 20 songs and 10 lessons that encourage family play. DIMENSIONS: 21 1/2" L x 4 1/2" W x 19 1/2"

Bean Bag Dinner Tray

The Bean Bag Dinner Tray is a lap tray designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. Designed to rest directly on the user's lap, this plastic tray attaches to a bean bag with a hook and loop strap. The removable bean bag provides a form fitting and comfortable support on the user's lap. The tray's raised edges are intended to stop items such as cups and plates from accidentally sliding off the tray. DIMENSIONS (WxD): 16 x 12 inches. COLOR:

Beasyglyder 32

The BeasyGlyder is a transfer board system designed to assist individuals in transferring between a wheelchair and bed, shower bench, commode, car, chair, etc or between a stretcher and a bed. This device is crescent-shaped to fit around wheelchair arms and wheels. It features an elongated S-shaped groove in the center to serve as a track for a round seat that rotates up to 360 degrees and slides from one end of the track to the other. Because the seat slides with the user, the shear stress and

Beasytrans Easy Transfer System (Ets) & Beasy Ii Easy Transfer System (Ets)

The BeasyTrans ETS and Beasy II ETS are transfer board systems designed to assist individuals with transfer between a wheelchair and a bed, shower bench, commode, car, chair, etc. or a stretcher and a bed. These devices differ from other transfer devices in that they have sliding seats that move from one end of a central elongated S-shaped track to the other. Because the seats slide with the user, the shear stress and friction associated with moving is borne by the system, not the users' skin.

Bec Pak

Wheelchair add on power drive with power pack easily placed off or on a manual wheelchair. 24 volt system, two 12 volt batteries, solid state controls, automatic electronic brakes. Battery charger included. Arc of joy stick, 7/8 inches from neutral position to full speed. Pressure required to operate, 3 ounces. Proportional control , can be positioned on left or right. High or low speed gears. Battery pack weighs 47 pounds. Up to 10 miles per charge. Operates at speeds up to five miles per hour.

Beclose

BeClose is an aging in place technology designed to help residents, families and caregivers stay in touch. Using discreet wireless sensors placed in the home, including a wearable alert button, BeClose tracks your loved one's daily routine. You'll know they are okay because you will be able to check on them at any time using a private, secure web page. And, if there are any disruptions, you will be alerted in real time by phone, email, or text message. Because everything is wireless, the system

Bed Access Support

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with mobility disabilities to transfer from a walker to her bed safely without assistance. The device was constructed from plywood that extended under the mattress and up the side] and a piece of 0.75 x 3 inch board that sits on the mattress top. Holes were drilled into the board to which a spare wheelchair armrest was attached. TITLE: The Bed Access Support. WEB SITE: Workshop Solutions at http://www.workshopsolutions.com/COMPLETE/bedacc

Bed Aid For Mattress With Side Support Rail (Model 130)

The Bed Aid for Mattress with Side Support Rail, model 130, is a grab bar for bed designed for use by individuals with mobility or balance disabilities. This tubular aid is designed to assist movement in bed. The large foot profile slides under mattress and the unit is counterbalanced by the bed side support rail. DIMENSIONS: The height of the side support is 509 millimeters (mm), the width of the base at the widest point is 597 mm, and the width of the support rail is 330 mm.

Bed And Lap Tray (Model P5001)

The Bed and Lap Tray, model P5001, is a bed tray designed for use by individuals with mobility disabilities. Made of wood, this tray has a laminated top that tilts for reading or writing or lies flat for eating. Adjustable legs allow the tray to be used in bed, in a wheelchair, or in a lift chair.

Bed Assist For Home Style Beds With Cushioned Hand Grip

Bed Assist Handle for Home Style Beds with Cushioned Hand Grip is designed for persons with limited mobility, the elderly, or those who have difficulty with balance, as it helps the user get in and out of bed safely. To set up, slide between the box spring and mattress. Laminated wood base. Cushioned hand grip.

Bed Caddie

The Bed Caddie is a rope ladder designed to assist individuals with mobility disabilities or decreased back strength in pulling themselves to a sitting position in bed. This three-tiered nylon ladder has cushion grip handles and the ergonomic buckle design enables the unit to be attached to most wood or metal bed frames. DIMENSIONS: Grip length is 36 inches; handle grip is 5 inches. Strap length is adjustable up to 45 inches. CAPACITY: 300 pounds. WEIGHT: 2 pounds.

Bed Cane

The Bed Cane is a transfer aid designed for use by individuals with mobility disabilities. This device consists of a large, crook-shaped handle with a cushioned grip and a powdercoated shaft affixed to a wooden base. The base fits between the mattress and box springs to provide stability for the handle which can be used for assistance while entering and exiting the bed, as well as to maintain balance while rising to a standing position or transferring to a wheelchair. The unit can be installed o

Bed Desk

The Bed Desk is a bed tray, bookholder, and laptop/notebook computer support designed for use by individuals with mobility, upper extremity, or severe physical disabilities or spinal cord injury. This unit is a book stand with legs like a bed tray. The two legs are collapsible and the desk can be adjusted to an angle for holding books, paper, or magazines. Made of imported Baltic birch, the unit supports up to 20 pounds and can be used with the legs extended or folded. When the legs are folded,

Bed Extension

CUSTOM ADAPTATION PURPOSE: To provide a bed extension for a hospital-style bed for a tall individual with acquired brain injury. A 150-millimeter extension with two metal bars was made that bolted into the existing holes at the top end of the bed base. A headboard, padded and covered with vinyl, was fixed at right angles to the bars. Straps with Velcro strips were used to fix the lower section of the mattress in position. This adaptation reduced the how often the individual’s position had to b

Bed Hoist

The Bed Hoist is a rope ladder designed to aid individuals with spinal cord injuries or lower extremity disabilities in pulling themselves to a sitting position in bed. This ladder attaches to the bed frame and consists of nylon side ropes with four rigid plastic rungs. By reaching and pulling up on each rung, the user pulls him or herself to a sitting position. DIMENSIONS: The rungs are 7.75 inches long x 1 1/16 inches in diameter. The rungs are spaced 7 inches apart.

Bed Lifters

The Bed Lifters are leg extenders designed for use by individuals with arthritis, back pain, or mobility or lower extremity disabilities. These hardwood blocks lift a bed up off the floor, making it easier to get in and out of bed. These extenders can be used with square or round bed posts, casters up to 2.75 inches in diameter, and trundle beds. When stacked, these blocks fit together securely; steel rods (included) add additional stability. DIMENSIONS (HxWxL): Each block is 3.5 x 4.5 x 4.5 i

Bed Mount For Ipad 2,3,4

Bed Mount for iPad 2,3,4 is designed to individuals with multiple sclerosis, muscular dystrophy, spinal cord injuries or any other other neurological impairments that impact mobility and accessibility while positioned in bed. The Bed Mount is designed to work for all types of mattresses. It is positioned under the mattress for stability.

Bed Raiser

CUSTOM ADAPTATION PURPOSE: To enable caregivers to assist individuals in and out of bed without bending. A boxed frame of plywood and chipboard was nade to elevate a wood-frame bed. The lengthwise edges were recessed toward the center of the bed enabling the caregiver to to get as close to the bed as possible. Detachable sidepieces slot into the bed frame to prevent the individual from falling out of bed. The sidepieces fit at the end of the bed when not in use. DIMENSIONS: The unit raises the

Bed Rope Ladder (Model Ha-4508)

The Bed Rope Ladder, model HA-4508, is a bed ladder designed for use by individuals with mobility disabilities. The ladder is used to pull up to a sitting position in either a single or double bed. Ends of the rope cords are tied around the bed legs. WEIGHT: 286 grams.

Bed Surround

CUSTOM ADAPTATION PURPOSE: To prevent a child with intellectual, communication, mobility, and vision disabilities from leaving the bed unattended during the night. An enclosure for the bed was built using eight plywood panels covered in fabric-covered foam. Each panel is equipped with two metal handles on the back to enable the child's parents to remove one or more when assisting the child in and out of bed or when changing sheets. Three panels fit down each side and the bed has a U-shaped pane

Bed To Commode Lift Increases Independence.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Device to assist someone with rheumatoid arthritis to transfer from bed to commode and back without using legs or requiring assistance from others. Materials include standard garage door opener, A-frame and sling for lift, 2 by 4 board, and lag screws. SKILLS REQUIRED: Woodworking. AUTHOR: Alexander, L TITLE: Bed to Commode Lift Increases Independence JOURNAL: Accent on Living REF: Vol 23 No 4, Spring 1979: p 108-109 PAGES (including cover): 3 1979.

Bedpro Under Mattress Alarm System

The BedPro Under Mattress Alarm System is wandering alert system designed for use with individuals with Alzheimer's disease, cognitive disabilities, dementia or restless sleepers. This alarm system and sensor provides monitoring of restless sleepers. The system alerts family members or caregivers when the person gets out of bed. A sensor pad is placed under the mattress. The pad is protected against incontinence. The weight of the mattress keeps the sensor pad in place to reduce false alarms. Th

Bedrail Adaptations

CUSTOM ADAPTATION PURPOSE: To enable an individual with multiple sclerosis to raise and lower side rais on a home hospital-style bed independently. The rails were mounted toward the head of the bed and folded toward the foot of the bed, making it impossible for the user to raise or lower them while in bed. The rails were reversed and re-mounted toward the foot of the bed, enabling them to be opened from the top by the user. TITLE: Bathroom Assistance. JOURNAL: TAD Journal. REF: Volume 26, Numbe

Bedroom / Bathroom Swing Lift

The Bedroom/Bathroom Swing Lift is a powered transfer lift designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. When installed in a bedroom or bathroom, this lift enables the user to maneuver to a wheelchair, toilet, shower, or bed. It has a tri-directional swing arm, which the user can move up and down using a push-button controller. The arm swings from side to side in two places. This allows nearly full range of motion around the bedroom or bathr

Bedside Commode (Model 8450)

The Bedside Commode, model 8450, is a height-adjustable commode designed for use by individuals with balance, mobility, and incontinence. The commode has a rust-resistant, powder-coated welded frame and includes a back, pail, and splash guard. DIMENSIONS: Seat height adjusts from 17 to 23 inches; the width between the arms is 18 inchesand the overall width is 22 inches; seat depth to backrest is 17.5 inches. CAPACITY: Maximum weight capacity is 350 pounds.

Bedside Commode (Model 8520) & 3 - 1 Commode (Model 8500)

The Bedside Commode, model 8520, and the 3 - 1 Commode, model 8500, are height adjustable commodes designed for use by individuals with balance and mobility disabilities and incontinence. Both models include a pail with a lid, and splash guard. They feature snap together frames and are angle- and height-adjustable. The 3 - 1 Commode has no back support and is designed to be placed over a toilet. DIMENSIONS: Seat height adjusts from 19 to 23 inches; the width between the arms is 18 inches and

Bedside Commode With Lid (Model 125)

The Bedside Commode with Lid, model 125, is a fixed height commode designed for use by individuals with mobility disabilities. The unit has a furniture-grade PVC tubular frame with armrests and a back bar. DIMENSIONS (HxLxW): 28 x 22 x 21.5 inches. WEIGHT: 17 pounds. COLOR: White.

Bedside Computer Monitor Magnifier

CUSTOM ADAPTATION PURPOSE: To provide a screen magnifier to make a computer monitor more easily viewable from the bedside for a person with quadriplegia. A permanent mount was created and added on to an existing computer stand and bedside table, enabling the individual to move the magnifier in and out to get the correct degree of magnification or flip it out of the way when closer to the screen while in a wheelchair. TITLE: Bedside Facilities. JOURNAL: TAD Journal. REF: Volume 28, Number 2, Jul

Bedside Computer Stand And Monitor Positioning System

CUSTOM ADAPTATION PURPOSE: To position a computer screen to be easily seen from a bed, hold the monitor and printer, and store other computer-related equipment such as cables and CDs) for an individual with quadriplegia. Laminated MDF was used to make a stand, which has a base with locking castors, a range of drawers for storage at the bottom and shelves above them, one with larger space to hold the monitor. There is also a pull-out shelf above the drawers for a keyboard and can be used when i

Bedside Steel Commode With Cream Finish

The Bedside Steel Commode with Cream Finish is a height- adjustable commode designed for use by individuals with severe physical disabilities. The removable back allows for placement over a toilet. This commode can be used as a stand-alone commode, as a raised toilet seat, and as a safety frame. It is equipped with skid-resistant rubber tips and a commode pail without a splash guard. The pail capacity is nine quarts DIMENSIONS (HxDxW): 26 x 19.25 x 21 inches. The width between the arms is 19.7

Bedside Table

CUSTOM ADAPTATION PURPOSE: To provide custom adaptation to bedside table for an individual with rheumatoid arthritis. A plywood box was constructed and screwed into an existing table top. The inside of the box forms a lower shelf, and the top forms the upper one. Inside the box, a shelf mounted on drawer runners was added. The shelf has a small hook-style handle in the center for easy, out of the way use. A small gap all the back of the box accommodates cords for various equipment. A larger hol

Bellaire With Lumbar Support

The Bellaire with Lumbar Support is a seat lift recliner chair designed for use by individuals with mobility disabilities. This motorized chair has a hardwood frame; a welded steel base; heavy-gauge, no-sag steel springs in the seat and back; dacron fibers in the arms, back, and chaise for shape retention; and a cushioned seat for comfort and support. Covered in acrylic Wear-Dated fabric, this chair also features Scotchgard fabric protection, dual magazine pockets, adjustable lumbar support, tri

Belmont Pu Corner Shower Stool (Model 124)

The Belmont PU Corner Shower Stool, model 124, is an adjustable shower stool designed for us by individuals with mobility or balance disabilities. This stool has a plastic coated tubular steel frame and a polyurethane molded padded seat. It is designed to fit into the corner of a shower, allowing full access to the caretaker. It has four rubber tip legs. DIMENSIONS: The seat height adjusts from 20 to 24 inches, the seat width is 16 inches, and the seat depth is 13.125 inches. The footprint is 1

Benebath Shower & Bath Bench

The BeneBath Shower and Bath Bench is a bath and shower bench designed for use by individuals with mobility or balance disabilities. This lightweight bench has an anodized aluminum frame with a molded plastic seat, and features contoured removable seat pads; separately height-adjustable legs; large, flared, non-skid, contoured feet; pin locks for securing adjustable parts; and molded handles in the seat. The bench can be disassembled for storage or transport in a zippered carrying bag (included)

Benebath Shower & Bath Chair

The BeneBath Shower and Bath Chair is a bath seat and shower chair designed for use by individuals with mobility or balance disabilities. This lightweight chair has an anodized aluminum frame with a molded plastic seat and back. Features include contoured seat and back pads; separately height adjustable legs; large, flared, non-skid, contoured feet; pin locks for securing adjustable parts; and molded handles in the seat and back. The chair back is positioned at a slight angle for comfort. The pa

Beneke Samaritan Lift Seat (Model Sl 503)

The Beneke Samaritan Lift Seat, model SL503, is toilet lift seat designed for use by individuals with physical disabilities. The lift raises the seat height by 3-7/8 inches. The seat is elongated and has an open front. A full rotational stainless steel hinge bracket raises the lift seat two inches away from the bowl for cleaning. The sanitary inner rim directs all moisture into the bowl and prevents moisture flow to the outside rim. The seat is made of plastic with stainless steel mounting bolts

Beneke Universal Sheltering Arms Seats (Models Sa500 Pc, Sa501 Pc, & Sa507 Pc)

The Beneke Universal Sheltering Arms Seats, models SA500 PC, SA501 PC, and SA507 PC, are safety frames with elongated seats designed to attach to toilets. The support arms are fashioned from one continuous piece of heavy-gauge, non-corrosive stainless steel tubing with a powder coat finish. Arms have polypropylene pistol grips. Model SA500 PC comes with a closed front seat with cover. Model SA501 PC comes with an open front seat with cover. Model SA507 PC comes with a closed front seat without c

Bentley

The Bentley is an adult manual tilt-in-space wheelchair designed for use by individuals with mobility, lower extremity, neurological, or severe physical disabilities or spinal cord injury. This chair can be propelled by hand and/or foot in and out of tilt. FRAME: The overall width with 12- or 16-inch wheels is the seat width plus 9.5 inches; with 20- or 24-inch wheels and hand rims the overall width is the seat width plus 10.5 inches and without hand rims, the width is the seat width plus 9 inch

Berlin Button

The Berlin Button is a pedestrian signal control switch designed for use by individuals who are blind, deaf blind, or who have low vision or mobility disabilities. The button can be fitted to all traffic lights, including retrofits. The button has a large surface and is touch sensitive. Available features include extension of the green phase for pedestrians with mobility disabilities; audible signals for visually impaired pedestrians; tactile signaling through a vibration module for pedestrians

Bernie The Dragon (Model 8056)

Bernie the Dragon, model 8056, is a switch operated toy designed for use by children with upper extremity, mobility, cognitive or severe physical disabilities or spinal cord injury. The toy is activated with a capability switch (not included) or by squeezing the dragon’s paw. The toy allows the child to listen to a song, “Burning Love,” as his mouth lights up and his head sways. Press the switch again to stop the song. POWER: Uses 3 AA batteries. DIMENSIONS (HxLxW): 12 x 18 x 12 inches.

Bestic

Bestic, an eating assistive device, is designed to support eating for individuals who have difficulty feeding themselves due to physical disabilities, decreased range of motion in their arms or hands, or decreased motor coordination due to neurological diseases or degenerative conditions such as Multiple Sclerosis, Polio, ALS, Parkinson’s Disease, Cerebral Palsy, spinal cord injuries, or ataxia. It is designed to allow the user to eat without assistance. Bestic can be controlled by anyone who is

Better Board Slant Boards

The Better Board Slant Board is a bookholder and table top writing desk designed for use by individuals who use wheelchairs or who have upper extremity. It is made of durable corrugated plastic, it has attached plastic clamps that hold paper well and includes non-slip feet to help it stay in place while in use. It has a 20-degree angle and can be used for reading, writing and copying. When not in use, this board folds to a thickness of 0.75 inch for stacking and storing. SIZES: Small and large.

Better Living Modular Homes

Better Living Modular Homes are prefab houses designed for use by wheelchair or walker users and others with physical disabilities. These homes are affixed to a permanent foundation (crawl space, basement, or pilings) and have floor plans with one to five bedrooms and one to three bathrooms. Features include wider hallways and doorways; closets with bi-fold doors; expanded space in bathrooms; rocker-style light switches for individuals with fine motor disabilities; light switches set lower in th

Bi-Level Computer Workstation

The Bi-Level Computer Workstation is a height-adjustable computer table designed for use by individuals who use wheelchairs. The height adjustment range starts low for young children or those using manual wheelchairs, and the height adjusts sufficiently to provide ample knee and arm-rest clearance for powered wheelchair users. Two hand cranks allow both work surfaces to be adjusted independently for correct view-height and balance between keyboard and monitor. DIMENSIONS (HxLxW): The keyboard su

Bi-Level Footrest Extender (Series 7033)

The Bi-Level Footrest Extender is designed for use by people who use wheelchairs and who have leg-length discrepancy. The extenders can be selected in a right-left or left-right combination and they feature a vertical centerboard which prevents the feet from crossing over and a padded legrest to prevent the feet from slipping off the footrests. DIMENSIONS: The extenders are available in a choice of 16 or 18 inches wide and with 1- and two-inch pads, 1- and 3-inch pads, 1- and 4-inch pads, 2- and

Bi-Level Tub Grab Bar

The Bi-Level Tub Grab Bar is a grab bar for the bathtub designed for use by individuals with balance or mobility disabilities. Ergonomically designed to encourage a proper grasp while entering or exiting the tub, this heavy-gauge welded steel bi-level bar clamps to the tub using a stainless steel locking mechanism and rubber pads. The unit can be installed without tools for temporary or permanent use. DIMENSIONS: The bar extends 14.75 inches above the tub and adjusts to fit tubs from 3 to 7 inch

Bi-Unique Biski

The Bi-Unique Biski is a bi-ski designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of lightweight, aircraft-quality aluminum, this bi-ski features a self-loading mechanism for independent chairlift access, a Glove Seating System that transfers the skier's movements to the ski, and a safety evacuation harness integrated into the Glove Seating System. OPTIONS: Headrest kit, T handle, roll bar extension, quick-release mechanism, outriggers, and

Bib Kit (Model 3390)

Used for mounting a Model 3185 joystick for chin operation. The bib uses velcro straps to secure the bib around the neck and rib cage, and incorporates adjustable mounting harware to permit a wide range of joystick positioning.

Bidan Pneumatic

The Bidan Turbo is a toilet bidet designed for use by individuals with physical or mobility disabilities. The device consists of a toilet seat equipped to deliver a stream of oxygenized warm water for cleansing and warm air for drying. The user activates the device by a pressing on micro switches with a foot or another part of the body. The seat, lid, and antibacterial water spray nozzle are removable for cleaning. The seat fits most standard toilets. OPTION: Raised seat.

Bidan Raised Seat

The Bidan Raised Seat is an elevated toilet seat designed for use by seniors or individuals with lower extremity or mobility disabilities or arthritis. This seat features a wide frontal opening for personal cleansing, built-in antibacterial action, an open base for cleaning, and a contoured seat that distributes weight over a large area. OPTIONS: Water and air body cleaning system. DIMENSIONS: 10 centimeters high.

Bidan Turbo

The Bidan Turbo is a toilet bidet designed for use by individuals with physical or mobility disabilities. The device consists of a toilet seat equipped to deliver a stream of oxygenized warm water for cleansing and warm air for drying. For privacy, a remote control allows the device to be activated by a caregiver outside the bathroom. The seat, lid, and antibacterial water spray nozzle are removable for cleaning. The seat fits most standard toilets. OPTION: Raised seat.

Bidetspa With Wireless Remote (Models Cb-7500R, Cb-7510R, & Cb-7710R)

The BidetSpa with Wireless Remote, models CB-7500R, CB-7510R, and CB-7710R, is a toilet bidet and personal cleansing system designed for use by individuals with physical or mobility disabilities or incontinence. This electronic replacement toilet seat bidet attaches to most elongated or round toilet bowls. It comes with a wall-mountable wireless remote control. Other features include posterior wash, feminine wash, heated seat, self-cleaning nozzle, warm air dryer, variable water temperature and

Bifold Ramp

The BiFOLD Ramp is a bus ramp designed for use by individuals with mobility disabilities. This double-folding, underfloor ramp can be installed for front or rear entry on a low-floor bus. The ramp is hydraulically operated with a manual back-up system that requires no valve or switch movement. It has a non-slip surface and stows flat. DIMENSIONS (LxW): Maximum usable platform area is 58.4 x 31.8 inches. CAPACITY: 660 pounds. WARRANTY: One year limited warranty; extended warranty available.

Big Ben Shopper

Wheelchair back pouch attaches to handgrips of wheelchair with straps. Room for complete change of clothes, lap robe, or other large items. 16 by 17 inches. Black or saddle. Vinyl.

Big Blue Mouse (Model Bbm 931)

The Big Blue Mouse, model BBM 931, is a mouse emulator designed for use by individuals with cognitive, learning, fine motor, mobility or upper extremity disabilities. This keyboard-style mouse gives "points of compass" control over the mouse pointer. When the user holds down the appropriate key, the mouse pointer on the screen moves in that direction until the key is released; pointer speed is adjustable. The Big Blue Mouse utilizes the Mousekeys feature of Microsoft Windows accessibility via

Big Bounder H-Frame Power Wheelchair

The Big Bounder H-Frame Power Wheelchair is a heavy duty powered wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME: Black powder-coated H-style TIG welded steel frame. The frame includes heavy duty 12 position adjustable suspension forks, anti-tipping wheelie wheels, sliding dual group 27 battery box with safety reflectors, and built in taillights. CONTROLS: UE1D electronic controls with 6 programs and bi-directional select swit

Big Bounder Manual Wheelchair

The Big Bounder Manual Wheelchair is a heavy duty manual wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME: Black powder- coated tube frame with heavy duty 12 position adjustable suspension forks and anti-tipping wheelie wheels. Options include a folding frame, frame reinforcements, frame colors other than black, lighting, and an electric horn. SEAT: 21 to 48 inch seat widths are available. Options include power seating systems

Big Boyz Scale System (Model 1226)

The Big Boyz Scale System, model 1226, is a digital scale accessory designed for use by individuals with mobility disabilities or severe physical disabilities or spinal cord injury. This is a retrofit weighing system that uses four transducers to turn an entire bed into a scale system. It works with all Big Boyz bariatric bed models, including King's Pride and Queen's Pride (see separate entries). The user’s weight is displayed on a 16-character dot matrix liquid crystal display (LCD) with L.E.D

Big Foot

Big Foot is a perception game designed for use by children with balance, neurological, or mobility disabilities. The game helps to iomprove balalnce, coordination, dexterity, and perceptual skills, as well as size discrimination and color recognition abilities. The set includes eight four-piece feet and playing cards.

Big John Toilet Seat

The Big John Toilet Seat is a wide elevated toilet seat designed for use by individuals with balance or mobility disabilities, those requiring a larger seat area, or obese individuals. This toilet seat features an ergonomic design that includes a larger and more comfortable opening and a contoured sitting surface that is two inches larger than standard toilet seats. It is available with a closed or open front. Other features include stabilizing synthetic rubber bumpers that keeps the seat from s

Big Kid Teepee (Model T-291)

The Big Kid Teepee, model T-291) is an accessible playhouse designed for use by children who use wheelchairs. The teepee-style tent is made of fade-resistant, fire-retardant, water-repellent ripstop nylon with pole pockets that enable the tent to be collapsed for storage without removing the poles. The poles are made of splinter-proof PVC plastic pipe and feature soft vinyl protective end caps. The set includes a permanent care and usage label, a full-color hang tag with instructions, and a sto

Bighorn Plastic Threshold (Model Bhr1110)

The BigHorn Plastic Threshold, model BHR1110, is a threshold ramp designed for use to make doorways accessible to wheelchair users. This threshold is slip resistant and can support a heavy load. Made from recycled plastic, it can be vertically cut for height and notched for door molding with typical rotary saws. It has molded miter ends and comes with high grade butyl rubber peel and stick tape for installation. OPTIONS: Shim kit to accommodate rise up to 2 inches. DIMENSIONS (LxW): 12 x 42.75 i

Bilingual Handicap Access Sign (With Access Symbol) (English/spanish) (Model 1573)

The Bilingual Handicap Access Sign (with Access Symbol) (English/Spanish), model 1573, is a bilingual access sign designed for use to indicate a wheelchair accessible route into a polling place or other public area. This sign has the International Access Symbol, a stylized drawing of a figure seated in a wheelchair, with the words, "Handicap Access," above the symbol and the phrase, "Acceso Para Personas Con Discapacidades," below it. The sign is imprinted on both sides and comes with a wire H-f

Bilingual Handicap Accessible Sign (With Arrow & Access Symbol) (English/spanish) (Model 1572)

The Bilingual Handicap Accessible Sign (with Arrow & Access Symbol) (English/Spanish), model 1572, is a bilingual access sign designed for use to indicate wheelchair accessible routes for individuals with mobility disabilities or spinal cord injury. The sign features the phrase, "Handicap Accessible," above the International Access Symbol, a stylized drawing of a figure seated in a wheelchair, with a left pointing arrow beside it. Below the symbol and arrow is the phrase, "Acceso Para Person

Binocular Clamp

The Binocular Clamp is an extension arm for accessories designed to enable a persons to use a pair of binoculars without having to support the weight of them. The device consists of a 360-degree swiveling clamp fixed to the end of a 13 mm diameter stainless steel rod. The rod mounts onto the fitting of a wheelchair. Binoculars are attached to the device with an off- the-shelf Kaiser binocular fitting. PROTOTYPE DEVELOPMENT: Designed by Colin Knauf for a user with weak arms who can raise the bino

Biosoft Palm Guard Gloves

The Biosoft Palm Guard Gloves are push gloves designed to protect the wearer's hands while propelling a wheelchair. These gloves feature an elastomer palm grip to absorb shock, vibration, and pressure. These pull-on fingerless gloves have an open-weave mesh back with adjustable Velcro closure. SIZES: Small, medium, large, and extra large.

Bird Cage Walk

CUSTOM ADAPTATIONPURPOSE: To enable an individual who uses a wheelchair to transport a bird cage and related supplies. This wooden cart, or trolley, has a flat top shelf above a cupboard with handled doors, a push hadle at one end, and four casters with tires, rwo of which lock. The top shelf accommodates the bird cage and the cupboard provides storage for bird food, newspapers, and additional supplies. A clear lacquer finish enables easy cleaning. DIMENSIONS (WxLxH): 500 x 780 x 680 millimeters

Birdie

The Birdie is an electric mobile hoist designed for individuals with limited lower extremity mobility, strength, and coordination associated with generalized weakness, stroke, or traumatic brain injuries. It offers a special folding design for storage and transportation. There is a snap lock mechanism for added security, and can be completed without tools. The mast and boom are also detachable from the base.

Birdie Buddy

---- PROTOTYPE --------- PURPOSE: To create a prototype of a wheelchair mount for a camera and binoculars for an avid photographer and birdwatcher with quadriplegia. The Birdie Buddy clamps securely to a bar on the wheelchair base frame, holds a camera or binoculars at eye level, and folds down along the side of the wheelchair when not in use. This device supports the weight of the camera or binoculars, convenient switching between the two pieces of equipment, and an adjustable viewing angle. T

Birstall Bariatric Mobile Commode (Model 195)

The Birstall Bariatric Mobile Commode, model 195, is a fixed height caster commode designed for use by large individuals with lower extremity or mobility. This commode has a dip-coated non-peel welded frame and a padded backrest and commode seat cover. Other features include a removable oval pan, a molded clip-on commode seat and four brake castors. DIMENSIONS (WxD): 630 x 55 millimeters (mm). The seat height is 500mm from floor to commode, the width between arms is 605 mm, the seat depth is 430

Black Fiberglass Cane With An Explorer Handle

The Black Fiberglass Cane with an Explorer Handle is a straight cane designed for individuals with mobility disabilities. This heavy-duty fiberglass cane has a contoured Explorer Handle. DIMENSIONS: The cane height is 36 inches. CAPACITY: 350 pounds. COLOR: Black.

Black Finish Wood Cane With Round Handle

The Black Finish Wood Cane with a Round Handle is a straight cane designed for use by individuals with mobility disabilities. This traditionally-designed wooden cane has a hook handle. OPTIONS: Tip size available in 1 inch or 7/8 inch. DIMENSIONS: The cane length is 36 inches. COLOR: Black.

Black Hawk Chief (Model 107-Zrx)

The Black Hawk Chief, model 107-ZRX, is a powered stand up wheelchair designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. The system allows variable blendability of all positions, and compensates mechanically for body position by moving armrests and positioning devices such as lateral supports. FRAME (LxW): 38 x 23 inch frame. Ground clearance is 4 inches without anti-tipper wheels; turning radius is 29 inches. Custom sizing is available for indiv

Black Poly Spoke Guard With Alloy Hand Rim

The Black Poly Spoke Guard with Alloy Hand Rim is a spoke protector with attached handrim designed for use by people with lower extremity or mobility disabilities or spinal cord injury who use manual wheelchairs to play wheelchair rugby and other wheelchair sports. This unit is for use on the Melrose Rhino wheelchair rugby chair (see separate record). The poly spoke protector is riveted to a ring that is welded to the inside of an alloy handrim. The unit is attached to a wheel (not included) wit

Black Poly Spoke Guards With Rubber Hand Rims

The Black Poly Spoke Guards with Rubber Hand Rims are spoke protectors with attached handrims designed for use by people with lower extremity or mobility disabilities or spinal cord injury who use manual wheelchairs to play wheelchair rugby and other wheelchair sports. The poly spoke protector is riveted to a ring that is welded to the inside of a rubber handrim. The unit is attached to a wheel (not included) with 6 or 12 tabs that mount either onto the rim or close in. The spoke protectors sit

Black Texture Coated Footplates.

Footplates for Quickie wheelchairs. 90 degree/90 degreee aluminum footplates with a painted black texture surface. Replaced textured tape to provide nonslip surface.

Black Trays

The Black trays are wheelchair lap trays designed for use by individuals who use wheelchairs. These PVC trays are equipped with attached rims and are difficult to crack. SIZES: Infant, child, and adult sizes. COLOR: Black.

Blazer With Belt (Model 011)

Blazer with Gathers and Belt, model 012, is a women’s jacket designed for use by individuals with mobility or severe physical disabilities and spinal cord injury. This tailored blazer with gathered detailing features four front buttons and a zipper in the high back and sleeves for ease in dressing. The back is available in high or regular length and belt loops are available at the back hem of the longer length, upon request, to aid in dressing and to help the wearer to easily pull down the fabri

Blazer With Gathers And Belt (Model 012)

Blazer with Gathers and Belt, model 012, is a women’s blazer designed for use by individuals with mobility or severe physical disabilities and spinal cord injury. This tailored blazer with gathered detailing features four front buttons with a zipper in high back and sleeves for ease in dressing. The back is available in high or regular length and belt loops are available at back hem of longer length, upon request, for aid in dressing and to help the wearer to easily pull down the fabric at back.

Blue Flash

The Blue Flash is a carrying aid for communicators designed for use by individuals with communication and mobility disabilities. Pushed like a walker or a stroller, this mobile carrier accommodates communicators and portable computers and features a platform with a trap-in system for securing the device, two front caster-style wheels and two large rear wheels, and a push handle. The height-adjustable carrier collapses for storage and includes a detachable basket under the device platform.

Bluetooth Ihome

Bluetooth iHome is designed for use by individuals with fine motor, grasping and neurological disabilities. This device is equipped for wireless audio streaming. It works with any Bluetooth enabled device to allow listening to music and audio programs. It has been adapted with six 2 1/2" switches to control tracks forward and backward, increase and decrease the volume, pause and turn the device on/off. The iHome features a dynamic speaker for full range of sounds, dual alarm clocks, backlight LC

Bobath Extra Wide Hydraulic Therapy Couch

The Bobath Extra Wide Hydraulic Therapy Couch is designed for use by therapists working with children with various neurological impairments such as cerebral palsy. It can accommodate both the therapist and child on the couch. Bobath Therapy Couches can be used in clinics, hospitals and medical centers offering Bobath therapy. It is available in both electric and hydraulic versions. POWER: Examples: Hydraulic. DIMENSIONS: Maximum couch height: 1000 millimeters (39 inches), Minimum couch height:

Bobcat 3 Wheel Compact Scooter (Models S38600 & S38601)

The Bobcat 3 Wheel Compact Scooter, models S38600 and S38601, is a three-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 38 x 19 x 38.5 inches. The turning radius is 32.2 inches. It has front 2-inch anti-tip wheels and a front large carry basket. The scooter can be disassembled into four pieces for transport, and the tiller folds down for stor

Bobcat 4 Wheel Compact Scooter (Models S38650 & S38651)

The Bobcat 4 Wheel Compact Scooter, models S38650 and S38651, is a four-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 37 x 19 x 35.5 inches. The turning radius is 35.4 inches. It has 2-inch anti-tip wheels and a front large carry basket. The scooter can be disassembled into 4 pieces. The base is available in red (model S38650) and blue (S386

Bobles Obstacle Course Set

Bobles obstacle course set is designed to be a playful indoor environment for children, where they can work on motor skills. Can be used as furniture but meant for play and to enhance children's motor skills while playing. Each animal influences motor skill development in a positive direction way. Free of any toxin or phthalates.

Boccia Ball Ramp

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual who uses a wheelchair and has only limited use of one arm to play boccia ball. The top of the ramp rests on the arms of the user's wheelchair and extends to the floor. To adjust the length of the run, a variable set of legs allow an assistant to raise the lower end of the ramp to various heights as directed by the player. The higher the ramp is raised, the shorter the run. At the top of the ramp, an adjustable support can be placed in var

Boccia Ball Ramp 2

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual who uses a wheelchair and has only head movement to play boccia ball. The top of the ramp rests on the arms of the user's wheelchair and extends to the floor. To adjust the length of the run, a variable set of legs allow an assistant to raise the lower end of the ramp to various heights as directed by the player. The higher the ramp is raised, the shorter the run. At the top of the ramp, an adjustable support can be placed in various posi

Boccia Ball Ramp 3

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual who uses a wheelchair and has limited movement to play boccia ball. The top of the ramp rests on the arms of the user's wheelchair and extends to the floor. The top of the ramp is on a swivel, enabling the user to turn the ramps to aim. To adjust the length of the run, the user changes the ball release position on the ramp. TITLE: The Boccia Ball Ramp 3. WEB SITE: Workshop Solutions at http://www.workshopsolutions.com/COMPLETE/ramp4.htm.

Body Buddy Lotion Applicator

The Body Buddy is a lotion applicator designed for use by individuals with upper extremity disabilities or spinal cord injury. This soft vinyl, non-absorbent applicator band has a handle loop at each end and provides extra reach to apply moisturizers to hard-to-reach places. The lotion is absorbed into the skin with nothing left on the band, The band can be used to reach the back, legs, or the bottoms of the feet. The band can be used to apply lotions, medicated ointment, or sunscreen and is ma

Body Mount (Leg) For Iphone, Ipod Touch And Ipad

The Body Mount (Leg) for iPhone, iPod Touch and iPad is a cell phone holder and tablet computer mounting system for people with upper or lower extremity, grasping and mobility disabilities, people with use of one hand, and wheelchair users. The system includes two adjustable straps to secure an iPad, iPhone, or iPod Touch on the user's leg while seated in a wheelchair. OPTIONS: Mounts are available for the iPod Touch, iPhone 4, iPhone 4G, iPad 1 and iPad 2.

Boing!

The Boing! is a fully adjustable manual sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: A rigid, rear tube assembly and fully adjustable frame. This chair is available in more than 20 standard and custom finishes. Anti-tips, frame protectors, and push handles are optional. SEAT: 13 to 18 inches wide and 14 to 19 inches deep. The folding backrest adjusts in height and angle, with a choice of height adjustment ranges from 8 to 18 inches. Si

Boldstep Safety Stair Tread

Boldstep Safety Stair Tread is an anti-slip stair tread designed to improve stairway footing of individuals with physical or walking disabilities. This durable anti-slip stair tread is built into an aluminum platform with an epoxy-based filler. The tread can be anchored into cement, steel, or wood surfaces, and can be used in new construction or attached to existing stairs in renovation projects, including interior or exterior stairs in high-traffic areas. Treads are chemical resistant and ultra

Bolero

Bolero is a four-wheel scooter designed for use by individuals with mobility disabilities. FRAME (LxW): 1340 x 580 millimeters. The midsize chassis separates for transportation and is available in red or blue. A headlight and turn signal are inlcuded. RWD: Rear-wheel drive with with mechanistic free-wheel drive transmission. SEAT: Automobile style, swing-away captain's seat. ARMRESTS: Height and width adjustable flip-up armrests. BRAKES: Fully-automatic magnetic disc safety brake. WHEELS: All f

Bolster Chairs (Models B3, B3C, B3Ccs, B4, B4C, & B4Ccs)

Bolster Chairs, models B3 through B4CCS, are adjustable chairs with attached desks for children with neurological or severe physical disabilities up to 48 inches tall. The B3 Series is intended for children two to six years of age up to 42 inches tall. The B4 Series is designed for children five to eleven years old up to 48 inches tall. FEATURES: Models B3CCS and B4CCS have casters, an anterior support, and adjustable lateral supports. Models B3C and B4C have 4-inch swivel locking casters. Stand

Boolee ADA Compliant Booth

The Boolee ADA Compliant Booth is a wheelchair accessible voting booth designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. The unit has a 1-inch diameter tubular aluminum frame with urethane-coated polyester fabric side panels and an ABS sheet table. All fasteners are zinc plated. This voting booth has an X-brace design and folds for storage and transportation. OPTIONS: Precinct on a Cart system for storage and tran

Boolee Twin Booth With Ada Compliant Station

The Boolee Twin Booth with ADA Compliant Station is a wheelchair accessible voting booth designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. The voting booth has a tubular aluminum frame with an X-Brace system so it can be folded for transportation and storage. Side panels are urethane-coated polyester fabric. OPTIONS: Precinct on a Cart system for storage and transport. DIMENSIONS (HxDxW): 60 x 24 x 59 inches; 60 x

Boomerang Bar (Model 1220)

The Boomerang Bar ##1220 is a stainless steel wall grab bar for use in a shower or bathtub, or by a toilet. This support consists of a half diamond shaped bar bent at 110 degrees, that mounts to the wall in two places at the ends. This bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS: Each side is 12 inches, with 20 inches separating the two ends; 1, 1.25, or 1.5 inch diameter tubing. Safety wall clearance is 1.5 inches. FINISH: B

Boomerang Helmet

The Boomerang Helmet is a protective helmet designed to provide head protection for infants and toddlers with balance or mobility disabilities. The helmet features an extended coverage EPS foam liner with Tight-Fit Microshell, PinchGuard buckle, a foam visor, eight air vents and colorful graphics. SIZES: Fits head circumferences ranging from 18.5 inches to 19.75 inches when measured around the head 1 inch above the eyebrows. WEIGHT: 9 ounces. COLOR: Blue Trucks, Red Elephant Baseball, or Pink Ra

Bosch Vision 500 Series Dryer

The Bosch Vision 500 Series Dryer is a front loading clothes dryer designed for use by wheelchair users or individuals who are blind or have low vision. Controls are on the front of the unit above the loading door. The door hinges can be reversed from the left side to the right. The dryer has a dial control for selecting the drying time and tactile buttons to select the heat level. There is an LED status indicator. Drying options include a no-heat cycle, a denim cycle, and steam cycles to relax

Bosch Vision 500 Series Washer

The Bosch Vision 500 Series Washer is a front loading clothes washer designed for use by wheelchair users or individuals who are blind or have low vision. Controls are on the front of the unit above the loading door. The washer has a dial control for selecting the wash cycle, and four tactile buttons. There are 15 wash cycle options, including a jeans cycle and a comforter cycles for blankets. The washer uses as little as 13 gallons per load. DIMENSIONS (HxWxD): 36.9 x 27 x 31.6 inches. WEIGHT:

Boss Hd Equalizer Bariatric Tilt System

The BOSS HD Equalizer Tilt System is a powered tilt-in-space system designed for use by individuals with mobility, neurological or severe physical disabilities. This tilt-in-space system is designed to be mounted on a heavy-duty power wheelchair base (not included) such as the PaceSaver BOSS 6 powered wheelchair (see separate entry). CONTROLS: Integrated programmable Shark joystick controller. A swing-away controller mount and attendant control are optional. SEAT (DxW): (18 to 26) x (22 to 30) i

Bosworth Shower Bench (Model 127)

The Bosworth Shower Bench, model 127, is a portable shower bench designed for use by individuals who have lower extremity, balance, or mobility disabilities. This height-adjustable shower bench is constructed of perforated, injection-moulded plastic that does not rust and offers warmth to the user when seated. Features include side arms with seat handles for extra safety when transferring and non-sip rubber tips. The seat clips onto the frame and can be removed for ease in cleaning. DIMENSIONS:

Bottom Buddy Toilet Tissue Holder

The Bottom Buddy Toilet Tissue Holder is a toileting aid designed for use by individuals with grasping, neurological, reaching, or upper extremity disabilities or spinal cord injury. This device has a curved handle and a rounded head. The soft, flexible head has three tulip-petal sections that pull back to allow the user to insert and grip any toilet paper or pre-moistened wipe securely. Once inserted, the toilet tissue covers the rounded head and the user does not need to touch it again. A pres

Bottoms Up Bar

The Bottoms Up Bar is a transfer aid designed for people with lower extremity and mobility disabilities or spinal cord injury and lower extremity amputees. It allows a person in a wheelchair to transfer to a seated position on the ground or floor and from the floor or ground back into the wheelchair. The Bottoms Up Bar attaches to a wheelchair's frame with two collar clamps that are fastened to the front of the frame. The width of the Bottoms Up Bar is adjustable to accommodate multiple wheelcha

Bottoms Up Bar Adjustable Base Unit

The Bottoms Up Bar Adjustable Base Unit is a transfer aid designed for people with lower extremity and mobility disabilities or spinal cord injury and lower extremity amputees. It allows a person to use the Bottoms Up Bar (see separate record) transfer from a parked wheelchair or a chair, sofa or other sitting furniture to a seated position on the ground or floor and from the floor or ground back into the chair. The four legs of the Bottoms Up Bar are placed into holes in the Base Unit's frame

Bounder Manual Wheelchair

The Bounder Manual Wheelchair is a heavy duty manual wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME: Black powder- coated tube frame with heavy duty 12 position adjustable suspension forks and anti-tipping wheelie wheels. SEAT: 16, 17 or 18 inch widths. Options include custom seat width or length, custom back height, power seating system (recline, tilt, or seat elevator), and headrests. UPHOLSTERY: Standard duty sling upholst

Bounder Plus H-Frame Power Wheelchair

The Bounder Plus H-Frame Power Wheelchair is a powered wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME: Black powder- coated H-style TIG welded steel frame with heavy duty 12-position adjustable suspension forks, anti-tipping wheelie wheels, built-in taillights, and sliding battery box with safety reflectors. Color frame options are available. CONTROLS: UE1D premium electronics (6 programs with bi-directional select switch). O

Bounder Plus Manual Wheelchair

The Bounder Plus Manual Wheelchair is a heavy duty manual wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME: Black powder-coated tube frame with heavy duty 12 position adjustable suspension forks and anti-tipping wheelie wheels. Options include frame colors other than black, a folding frame, frame reinforcements, and an electric horn. SEAT: 14 to 20 inch widths are standard. Options include custom seat width or length, including

Bounder Power Wheelchair

The Bounder Power Wheelchair is an adult powered wheelchair. FRAME: Powder-coated TIG welded tube frame with 0.065- and 0.120-inch wall steel tubing and 12-position adjustable suspension fork. Anti-tipping wheelie wheels standard. Manual & power reclining systems available. CONTROLS: UE1D electronics including 6 programs with bi-directional select switch. 2 axis joystick. Right or left hand controls standard, and chin, foot and attendant controls available. RWD: Super torque magnetic motors

Bounder, Bounder Plus, & Big Bounder Manual Gurney

The Bounder, Bounder Plus, and Big Bounder Manual Gurneys are manual stretcher wheelchairs designed for use by individuals with severe physical disabilities or spinal cord injury. FRAME: Black powder-coated tube frame with reinforced side and end rail mounts, made using all steel TIG welded box frame construction. Options include frame reinforcements; side and end rails; drink holder; frame colors other than black and upholstery; sliding drawer at front of gurney; storage tray located approximat

Bounder, Bounder Plus, & Big Bounder Power Gurney

The Bounder, Bounder Plus, and Big Bounder Power Gurneys are powered stretchers designed for use by individuals with severe physical disabilities or spinal cord injury. FRAME: Black powder- coated steel tube frame with reinforced side and end rail mounts, made using TIG welded box frame construction. CONTROLS: UE1D electronics featuring six programs with a bi-directional select switch and electric brake controls. Options include a programmer for electronics; attendant controls; custom hand contr

Bowling Ramp

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual who uses a powered wheelchair and has limited movement to bowl. The ramp shown is made of strong light tubular steel. The height is set to just clear the wheelchair armrests and controls. The horizontal portion of the ramp at the top is very slightly past the horizontal so the ball stays there until gently pushed forward. To maximize speed, the upper portion of the ramp is straight and the lower half has a gentle curve to the horizontal.

Box Grader & Ripper

A Box Grader & Ripper is designed for use by individuals with mobility impairment, balance/core stability, blindness/low vision, multiple sclerosis (MS), paraplegia, vertigo, degenerative joint disease.  It can be used to create smooth solid pathways for workers using wheelchairs and to prevent tripping for people walking. This machine can be used to fill in potholes and dig out rough spots in the path without lifting a shovel, rake or packer.

Bracket To Hold Power Packs For Wheelchairs

CUSTOM ADAPTATION PURPOSE: To enable a controller for a power assist for a manual wheelchair to be attached to wheelchair push handles. The power assist units are suspended under the wheelchair seat and the controllers are attached to the wheelchair push handles with the included full-circle Bakelite clamp for access by caregivers.When the clamp did not fit over the rubber handgrips, a split metal clamp was designed. The top lock was macined of aluminum and threaded for bolts. The bottom was ma

Bradgate Shower Stool (Model 125)

The Bradgate Shower Stool, model 125, is an adjustable shower stool designed for use by individuals with mobility disabilities. This stool has a plastic-coated tubular frame and a clip-on molded seat with a cut-away front and drainage holes. Other features include hand-held shower holders and non-marring rubber tips. The plastic seat is removable for cleaning. DIMENSIONS (HxLxW): 450 to 600 x 350 x 40 millimeters. CAPACITY: 115 kilograms.

Bradgate Shower Stool With Material Back (Model 126)

The Bradgate Shower Stool with Material Back, model 126, is an adjustable shower stool designed for use by individuals with mobility disabilities. This plastic coated tubular stool has a material back for added support. It has a molded seat with a cut-away front and drainage holes that clips onto a metal support base. Other features include hand-held shower holders and non-marring rubber tips. The plastic seat is removable for cleaning. DIMENSIONS: (HxLxW): 450 to 600 x 350 x 40 millimeters. C

Brain Interface Steering System For Wheelchair

PROTOTYPEPURPOSE: To develop a hands-free wheelchair steering system through brain wave activity for persons with limited mobility. Toyota, in collaboration with other researchers in Japan, has developed one of the fastest systems for analyzing brain waves. This new technology requires only 125 milliseconds (125 thousandths of a second) to read brain waves. An individual uses the prototype system by placing a cap on his or her head that reads brain signals through an electroencephalograph (EEG)

Brake Attachment

This Brake Attachment is for wheel brakes on a wheelchair. The brake applies one square inch of surface against wheel to increase the holding power of the brakes. No tools are needed to attach brake to a wheelchair.

Brake Extension (Model 86)

The Brake Extension, model 86, is a wheel lock extension lever designed for use by individuals who are unable to reach or manipulate standard wheel locks on wheelchairs. These devices attach to the existing wheel lock brake of a wheelchair and is held in place by a lock knob.

Brass Shoehorn (Model Or-0009)

The Brass Shoehorn, model OR-0009, is a shoehorn designed for use by individuals with lower extremity or mobility disabilities, arthritis, or back pain. Made of polished brass, this unbendable shoehorn is designed to make changing shoes effortless. DIMENSIONS: 11 inches long.

Braun Ambulette

The Braun Ambulette is a van conversion designed for use by individuals with mobility disabilities or spinal cord injury. This van conversion features a Dodge, Ford, or Chevrolet standard length chassis with a 24-inch raised top and a Millennium Series wheelchair lift mounted in either the side or rear door. Two floor plans are available for different combinations of ambulatory seating and wheelchair securement positions. Other features include Braun Fold-A-Way seating, vertical stanchion bar(s)

Braun Paratransit Van

The Braun Paratransit Van is a public transportation van designed for use by wheelchair users and other individuals with mobility disabilities. Vans are available with a wide variety of floor plans featuring multiple wheelchair securement locations and seating options. Each van includes an NHTSA-compliant Braun wheelchair lift. Floor plans are available with up to four wheelchair securement positions, with wheelchair and occupant belt systems are included for each securement location. Fold-A-Way

Braun Ra 300 Transit Ramp

The Braun RA300 Transit Ramp is a hydraulic bus ramp designed to provide wheelchair access for a low-floor bus. The ramp comes in a self-contained drop-in unit. When stored, the bi-fold ramp section folds onto itself and then back onto the base. When the ramp is extended, the first section is raised hydraulically and once it passes 90 degrees vertical, it is allowed to lower to its partially extended position using gravity; then the second section uses a similar procedure to reach it fully exten

Braun Ra400 Transit Ramp

The Braun RA400 Transit Ramp is a hydraulic bus ramp designed to provide wheelchair access for a low-floor bus. The ramp comes in a self-contained drop-in unit. When stored, the ramp section folds back onto the base. When the ramp is extended, it is raised hydraulically and once it passes 90 degrees vertical, it is allowed to lower to its fully extended position using gravity. It closes in a similar manner. It has a manual override in case of power loss or malfunction. No pre-assembly is require

Braun Ra400H Transit Ramp

The Braun RA400H Transit Ramp is a hydraulic bus ramp designed to provide wheelchair access for a low-floor bus. The ramp comes in a self-contained drop-in unit. When stored, the ramp section folds back onto the base. When the ramp is extended, it is raised hydraulically and once it passes 90 degrees vertical, it is allowed to lower to its fully extended position using gravity. It closes in a similar manner. It has a manual override in case of power loss or malfunction. No pre-assembly is requir

Braun Tranzsporter

The Braun TranzSporter is a van conversion designed for use by individuals with mobility disabilities or spinal cord injury. This raised top van features an under-vehicle wheelchair lift and a retractable power step. The van is built on a Ford E-350 van chassis with one of three available floor plans. Other features include a Q-Straint belt system, Altro flooring and plywood sub-floor, a lift-step interlock and lift light, Braun-built bench and Fold-A-Way seating, a fire extinguisher, a 10 unit

Breath Actuator (Model 3365)

A 4-direction, multiple switch actuator used to convert varying amounts of breath suction and pressure (sip and puff) into the directional commands required by the Multimode Interface for mode selction and oepration. The Model 2422 Breath Tube Kit is used to provide a means of sending these sips and puffs to the Breath Actuator.

Breath Tube Kit (Model 2422-2)

Used for supplying sip and puff directional commands to the breath actuator. The Breath Tube Kit includes a wingaway strap clamp mount for attachment to a standard 7/8 inch diameter wheelchair/power recliner back bar. The mount permits the breath tube to be pivoted away from the user by an attendant and returned to its original position without the need to readjust the flexible breath tube.

Breez 1025

The Breez 1025 is a powered transport wheelchair designed for indoor or outdoor use by individuals with lower extremity, mobility, neurological, or severe physical disabilities or spinal cord injury. The chair is operated by an attendant or caregiver who walks behind the chair. This chair is equipped with a standard stainless steel IV pole. FRAME (HxLxW): 42.5 x 27 x 26 inches. The overall length with footrests is 50 inches. The chair has a steel platform under the seat for carrying cargo and fr

Breez 1025-G

The Breez 1025-G is a powered transport wheelchair designed for indoor or outdoor use by individuals with lower extremity, mobility, neurological, or severe physical disabilities or spinal cord injury. The chair is operated by an attendant or caregiver who walks behind the chair. This chair is equipped with a standard stainless steel IV pole. FRAME (LxW): 47.5 x 34 inches with armrests and footrests. The chair has a steel platform under the seat with 1.8 cubic feet for carrying cargo, and it has

Breezy

The Breezy is a manual drive, lightweight wheelchair built for adults. FRAME: Folding frame in a choice of chrome, silver texture, or blue finishes. Push handles are standard and anti-tip tubes are optional. SEAT: A padded seat is standard. A non-padded seat is available at no cost. Standard seats are available in 14-, 16-, or 18-inch widths; the standard seat depth is 16 inches. A 20-inch wide or 18-inch deep seat is available at an extra charge. The seat height depends upon thw wheels and cast

Breezy 2

The Breezy 2 is a manual drive, lightweight wheelchair built for adults. FRAME: Folding frame in a choice of forest green, silver texture, or blue finishes. Anti-tip tubes are optional. SEAT: A padded seat is standard. A non-padded seat is available at no cost. Standard seats are available in 14-, 16-, or 18-inch widths; the standard seat depth is 16 inches. A 20-inch wide or 18-inch deep seat is available at an extra charge. The seat height depends upon the wheels and casters selected. The back

Breezy Basic

The Breezy Basic is a manual drive, lightweight wheelchair built for adults. FRAME: Folding frame in a silver texture finish. Push handles are standard and anti-tip tubes are optional. SEAT: A padded seat is standard. A non-padded seat is available. The seat is available in 16 x 16 inches or 18 x 16 inches. The back height adjusts from 17 to 19 inches. CUSHION: No. UPHOLSTERY: Sling upholstery is standard. ARMRESTS: Flip-back armrests with full- or desk-length pads are standard. Flip-back, heig

Breezy Le

The Breezy LE is a manual drive, lightweight wheelchair built for adults. FRAME: Folding frame in a silver texture finish. Push handles are standard and anti-tip tubes are optional. SEAT: A padded seat is standard. The seat is available in 16 x 16 inches or 18 x 16 inches. The back height is 17 inches. CUSHION: No. UPHOLSTERY: Sling upholstery is standard. ARMRESTS: Flip-back armrests with full- or desk-length pads are standard. Flip-back, height-adjustable armrests are optional. BRAKES: High-

Breezy Ultra 4

The Breezy Ultra 4 is a folding manual adult wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Non-corrosive aluminum frame. SEAT (LxW): 16 to 18 x 16 to 20 inches. The floor-to-seat height is 15.5 to 19.5 inches. UPHOLSTERY: Nylon upholstery. ARMRESTS: Adjustable-height padded armrests. Also available are flip-back arms in either desk or full length. CASTERS: 6 or 8 inch angle-adjustable casters. WHEELS: 20-inch full profile or 24-inch low profi

Brent Rehabilitation Wheel (Model 16)

The brent Rehabilitation Wheel, model 16, is a potter's wheel designed for use by individuals who use wheelchairs. This variable-speed power wheel has a frame that was designed in conjunction with rehabilitation and therapy experts. The frame provides access for a wheelchair, a standard stool, or a standing user. The wheel can handle 150 pounds of clay continuously. This wheel includes the brent Classic Controller with these features: Optimal torque at all speeds as the wheel speed remains const

Brewer Access Exam Table (Models 5000 & 5001)

The Brewer Access Exam Table, model 5000 and 5001, is an accessible medical examination table designed for use by individuals with mobility disabilities. It has a large, adjustable 4-leg step, and a pneumatic backrest for positioning. The table has multi-density, bolstered support upholstery with a seamless surface for cleaning; extendable, adjustable stirrups; leg extension; a plastic debris tray; front and side storage compartments; a paper roll holder; and hospital grade power outlets. The pa

Brewer Access High-Low Exam Table (Model 6500)

The Brewer Access High-Low Exam Table, model 6500, is a powered elevating examination table designed for use by seniors or individuals with mobility disabilities. Its low height and power back facilitate safe transfer to and from a wheelchair. This exam table rises and lowers at the using a powered system with a button controller, reducing strain on caregivers. There are 4 safety override switches. The upper end of the table is raised like a chair to provides back support during consultations an

Bridge Medical Pivot Grip Telescoping Portable Grab Bar (Models Bc400M & Bc400L)

The Bridge Medical Pivot Grip Telescoping Portable Grab Bar is a wall grab bar designed for use by individuals with balance or mobility disabilities. Because the bar telescopes and the ends pivot and rotate, this bar offers a variety of installation options, including stretching across a corner, stretching across the inside of a bathtub, or stretching across unparallel surfaces. The bar pivots 180 degrees. The bar attaches with large suction cups which lock and release with levers. SIZES: Model

Bridge Medical Telescoping Portable Grab Bar (Model Bc400M)

The Telescoping Grip Portable Grab Bar is a portable bathtub or shower grab bar designed for use by individuals with balance or mobility disabilities. The telescoping grip allows the portable grab bar to lengthen and shorten based on the specific need of the user. It is constructed with rubber suction pads capable of holding over 200 pounds of pull force strength for a reliable hold. The telescoping grip is available in two sizes to accommodate most needs and no tools are required for installati

Bridge Threshold Ramp (Models Tr1, Tr1.5, Tr2, & Tr3)

The Bridge Threshold Ramp is designed to provide wheelchair or scooter access over single steps or doorways. The ramp is made from aluminum with a non-slip surface. OPTIONS: Light duty plate for creating a bridge between the ground and doorway threshold. DIMENSIONS (LxW): 8 x 36 (model TR1), 10 x 36 (model TR1.5), 14 x 36 (model TR2), or 18 x 36 inches (model TR3). Rise is 1 inch (model TR1), 1.5 inches (model TR1.5), 2 inches (model TR2), or 3 inches (model TR3). CAPACITY: 750 pounds.

Bridge-Medical Single Grip Portable Grab Bar (Model Bc-201)

The Bridge-Medical Single Grip Portable Grab Bar, model BC-201, is a bathtub or shower grab bar designed for use by individuals with balance or mobility disabilities. This portable grab bar has suction cups for attaching to a tub, shower, or other smooth, non-porous surfaces. The suction cups provide over 200 pounds of pull strength and will not damage surfaces. DIMENSIONS: 13 inches long. The suction cups are 4.5 inches in diameter. WEIGHT: 3 pounds.

Brighton Bath Board (Model 302)

The Brighton Bathboard, model 302, is a bathboard designed for use by individuals with spinal cord injury , balance, or mobility disabilities or arthritis. This plastic-coated steel bathboard fits between the sides of the bathtub and is perforated for drainage. Features include a chromium-plated steel frame cleats, non-slip sleeving to ensure maximum grip against the side of the bath, and fitting adjustment with large butterfly nuts. DIMENSIONS: The bathboard is 27 x 12 inches (685 x 305 millim

Brilliant Lights Ball (Model 2047)

The Brilliant Lights Ball, model 2047, is a sensory integration activity designed for children with physical, cognitive, neurological, and visual disabilities. This light and sound effects ball features a single button, a single lever, and a plastic body that can be moved around like a roly-poly. If children turn the lever, lights rotate in a circular pattern. If they push the button, fun laughter and more light effects entertain them. Four different activities and two different sound and light

Brilliant Lights Busy Board (Model 2048)

The Brilliant Lights Busy Board, model 2048, is a sensory integration activity designed for children with physical, cognitive, neurological, and visual disabilities. This activity board features a plastic base in the shape of a cross with two horizontal levers and one vertical lever. Each lever, similar in appearance to a small gum ball, can be pushed up or down to operate and control twelve different combinations of lights and sounds. When a child activates one or more of them at any given time

Bringhurst Corner Shower Stool (Model 128)

The Bringhurst Corner Shower Stool, model 128, is a height adjustable shower stool designed for use by individuals with mobility disabilities. This plastic-coated shower stool with draining slats is designed to fit in the corner of the shower base. The seat is removable for ease of cleaning. The seat includes non-marring rubber tips. DIMENSIONS (HxWxH) 15 x 22.5 x 19.5 x 25.5 inches. CAPACITY: 279 pounds. WEIGHT: 13 pounds. COLOR: White

Brix

Brix is a manual child's wheelchair and stroller designed for use by children with lower extremity disabilities, mobility disabilities, and spinal cord injury. FRAME: The frame includes a support roll for safety and an adjustable bow handle that can be used to push the stroller. WHEELS: Comes with a front wheel fork and transparent wheel protector. The hubcab features colorful embossed animals and dolphins.

Broda Elite Chair (Model 785)

The Broda Elite Chair, model 785, is a recliner chair designed for use by individuals who need positioning support while sitting. This tilt-in- space chair has up to 90 degrees of infinitely- adjustable back recline and up to 38 degrees of infinitely-adjustable seat tilt. It features a suspension system of straps that conform individually to the user's body, thus suspending the user's weight across multiple points. The removeable swing-away armrests are individually height adjustable, with push-

Broda Shower Commode Chair (Model Cs 385)

The Broda Shower Commode Chair, model CS 385, is a commode shower chair designed for use by individuals with mobility disabilities or who need support while sitting. This chair features a suspension system of straps that conform individually to the user's body, thus suspending the user's weight across multiple points. The armrests and sides are removable to enable side transfers. This chair has a powder-coated stainless steel frame, a padded seat with 12 degrees of posterior tilt, 10 degrees of

Broda Tilt Wheelchair (Model 587)

The Broda Tilt Wheelchair, model 587, is a tilt-in-space low seat wheelchair designed for indoor use by individuals with lower extremity, mobility, or balance disabilities. The front pivot seat tilt allows for proper positioning of the foot on the floor for propelling the chair while tilted. FRAME (LxW): 51 x seat width plus 10.5 inches. The frame is 16-gauge tubular powder coated steel. Anti-tippers are included. SEAT (LxW): Standard seats are 17 x 16 inches or 17 x 18 inches. Optional seat dim

Bronco Walker

The Bronco Walker is a child walker designed for outdoor use. This walker features a wide, stable base with four widely-spaced smooth-running wheels with large outdoor tires. Each wheel has brakes and directional stabilizers for safety. Other features include a removable back support, padded lateral supports, a handrest bar, padded armrests and handles, padded lateral supports, and an attendant handle. The unit disassembles for transport and storage. SIZES: Size 0 for children ages 0 to 3, size

Brookfield

The Brookfield is designed for children 2 years and older who require moderate levels of postural support when seated. It can be used in daycare, school and home environments. The Brookfield has a molded back, which promotes central alignment and gives additional support while the child is seated. Its seat height and depth can also be adjusted. As an additional feature, the back can be adjusted in height. The Brookfield comes complete with a molded back, contoured seat, pelvic strap and heigh

Brown Cloth Cane Bag With Draw String

The Brown Cloth Cane Bag with Draw String is a carrying bag for a cane designed for use by individuals with lower extremity,mobility, balance and walking disabilities who use canes. Made of cloth, this bag features a draw string closure at the top to store the cane or to protect the cane from the elements when stored in the back seat of a car when traveling. DIMENSIONS: Fit canes up to 36 inches long. DIMENSIONS: Maximum length is 36 inches. WEIGHT: 0.2 pounds. COLOR: Brown.

Bruno Elan (Model Sre-3000)

The Bruno Elan, model SRE-3000, is a straight rail interior seat lift designed for use by individuals with balance, lower extremity, mobility and cognitive disabilities. The Elan has a 0-, 67- and 90-degree locking swivel seat at the top and the bottom of the stairway. The height-adjustable, folding seat is equipped with an adjustable footplate with a safety sensor, flip-up arm rests, and a seatbelt. It has an infra-red wireless control with momentary switching requiring a user to hold button co

Bruno Electra-Ride Elite

The Bruno Electra-Ride Elite is a straight rail interior seat lift designed for use by individuals with mobility disabilities and cognitive disabilities. The Electra-Ride has a 45- and 90-degree locking swivel seat at the top and the bottom of the stairway. The height-adjustable seat is equipped with an adjustable footplate with a safety sensor, flip up arm rests, and a retractable seatbelt. This lift can be installed on either side of the stairway, to within five inches of the wall. POWER: Us

Bruno Electra-Ride Ii (Model Sre-1550)

The Bruno Electra-Ride II is a straight rail interior seat lift designed for individuals with mobility disabilities and cognitive disabilities. The Electra-Ride II can be installed on either side of the stairway. There is a final end stop bumper at each end of rail. Adjustable speed control up to 32 feet per minute; actual loaded top speed is 28 feet per minute. SEAT: The seat width adjusts from 16 to 20 inches between the armrests, and the seat depth is 14 inches. The seat rotates, locking at

Bruno Electra-Ride Iii (Model Cre-2110)

The Bruno Electra-Ride III, model CRE-2110, is a custom rail interior seat lift designed for individuals with mobility disabilities and cognitive disabilities. The stairlift rail can be installed as close as 7 inches from the wall. The unit anchors to the steps, not the wall. Tight radius inside turns fit typical bi-level houses. The tight turn and narrow rail will keep the majority of the staircase free of obstruction. The height-adjustable seat swivels and locks at 45 degrees (bottom), 0 degre

Bruno Electra-Ride Lt (Model Sre-2700)

The Bruno Electra-Ride LT, model SRE-2700, is a straight rail interior seat lift designed for use by individuals with mobility disabilities and cognitive disabilities. The LT has a rack and pinion drive system will sense and automatically stop when obstacles are encountered. The seat and arms of the carriage flip up out of the way when the unit is not in use. The swivel seat locks for getting on or off. The rocker switch control is conveniently located at the end of the arm rest. The two wireles

Bruno Turning Automotive Seating (Tas) 2400 & 2400E Package

The Bruno Turning Automotive Seating (TAS) 2400 Turnout is a swivel seat base designed for use by individuals with mobility disabilities who have difficulty getting in and out of a car or minivan. The Turnout is installed on a vehicle-specific custom base plate assembly. The swivel base is engineered for ease of installation and use. The seat pivots out and over the door still and is available for both the driver and the passenger side. The 2400 has manual turnourt and the 2400E has powered tur

Bruno Turning Automotive Seating (Tas) 2500 Turny

The Bruno Turning Automotive Seating (TAS) 2500 Turny is a powered turning automotive seat base designed for use by individuals with severe physical disabilities and mobility disabilities who have difficulty entering and exiting minivans, pickup trucks, and full-size vans. The Turny replaces the existing seat base with a swivel, power up and down base. It allows for an even height transfer from a mobility device or can be lowered to 12 or 16 inches. The base swivels manually. The hand control fi

Bruno Turnout Turning Automotive Seating (Model Tas-2400/2400E)

The Bruno Turnout Turning Automotive Seating, model TAS-2400/2400E, is a swivel base designed for use by individuals with mobility disabilities who have difficulty getting in and out of a car or minivan. The unit is installed on a vehicle-specific custom base plate assembly and is available in a manual (TAS-2400) or powered (TAS-2400E) model. The seat rotates out over the doorsill, bridging the gap for a safe transfer onto the seat. Once the user is on the seat, it rotates back into the vehicle.

Bt

The BT is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. 6061 T6 aluminum powder coat frame with 1.5-inch tubing. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest angle is adjustable from 80 to 100 degrees. UPHOLSTERY: Laminated carbon fiber sailcloth adjustable by tension cord. CASTERS: Frogs Legs Ultra

Bt-Atb

The BT-ATB is a rough terrain sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches 6061 T6 aluminum powder coat frame with 1.5-inch tubing. SEAT (WxD): 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 8 to 20 inches in 1-inch increments. The backrest angle is adjustable from 90 to 100 degrees, and there is a 7075 aluminum CNC water-jet cut backrest plate. UPHOLSTERY: Laminated carbon fiber sail

Bt-Ballistic

The BT-Ballistic is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. 6061 T6 aluminum powder coat frame with 1.5-inch tubing. The frame features custom machined billet down tubes and axel cross bar and a mirror polish finish to echo motorcycle styling. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest angle

Bt-G Tribal

The BT-G Tribal is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. 6061 T6 aluminum powder coat frame with 1.5-inch tubing. The frame features 6061 T6 CNC machined tribal-themed cutouts. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest angle is adjustable from 80 to 100 degrees. UPHOLSTERY: Laminated carbo

Bt-Mg

The BT-Mg is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. Magnesium alloy powder coat frame with 1.375-inch tubing. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest plate is made of 7075 aluminum with a water jet cut. UPHOLSTERY: Laminated carbon fiber sailcloth adjustable by tension cord. CASTERS: 3.25

Bt-Mg-A

The BT-Mg-A is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. Magnesium alloy powder coat frame with 1.375-inch tubing. The center of gravity is adjustable in .5-inch increments. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest plate is made of 7075 aluminum with a water jet cut. UPHOLSTERY: Laminated car

Bt-Mg-As

The BT-Mg-A is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. Magnesium alloy powder coat frame with 1.375-inch tubing. Frogs Legs rear elastic-polymer suspension is standard. The center of gravity is adjustable in .5-inch increments. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest plate is made of 7075

Bt-Trail

The BT-Trail is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. It is intended for outdoor use on unpaved surfaces. To enhance stability, the BT-Trail’s design features a wider distance between the casters, and the casters are positioned forward to be even with the footrest to create a longer wheelbase. FRAME (LxW): 16 x 16 inches. 6061 T6 aluminum powder coat frame with 1.5-inch tubing. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 1

Bt-X

The BT-X is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. It is intended for indoor and outdoor use on a variety of terrains, including unpaved paths and beaches. To facilitate this versatility, the BT-X is designed to fit multiple wheels and casters in addition to those include with the standard model. FRAME: Aluminum alloy frame and forks. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is availa

Buffalo Tilt Table

The Buffalo Tilt Table is designed for therapeutic use with children and adults with mobility disabilities. This table can be used for prone or supine standing, as a tilt table for therapy, or for postural drainage. This unit features a steel frame with vinyl powdercoat finish, a solid wood body support covered in vinyl, trunk and head extensions, lateral supports, a back support, pommel, knee and heel supports, a tray, and a motorized assist, and casters for mobility.

Buggy Pioneer 5 Dlx S540/s541 Twin Front Wheel Micro

The Buggy Pioneer 5DLX S540/S541 Twin Front Wheel Micro Scooter is designed for indoor and limited outdoor use by individuals with mobility disabilities. Standard features include a front basket and multi-function display console. FRAME (HxLxW): 32 x 39 x 20 inches. The ground clearance is 2.4 inches and the turning radius is 38 inches. This scooter disassembles for transport or storage and is available in blue and red. CONTROLS: C40 controller with thumb lever handle bar steering. The tiller an

Bugzi

Bugzi is a powered indoor chair designed for children ages one to five whose mobility has been impaired by physical and neurological disabilities. It offers a unique opportunity for pre-school children with disabilities to experience independent mobility. Bugzi is an ideal introduction to switch and joystick use. It is compact and maneuverable. Each Bugzi is tailored and adapted to the individual child’s needs, with the capacity to adjust seating and controls as he or she grows. Bugzi is a

Build N' Balance Set

The Build N' Balance Set is designed to help children work on improving their balance, motor planning and coordination skill development. It comes complete with 10 interchangeable components to create multiple obstacle courses. Users can create inclines, declines, high surfaces (up to 9.5") and low surfaces (as low as 4") for children to navigate. The set includes: Build N' Balance Yellow Tops, Build N' Balance Red Tops and a Build N' Balance Blue Planks. DIMENSIONS: Build N' Balance Yellow Tops

Bumper Threshold (Model 477S)

The Bumper Threshold, model 477S, is a threshold ramp designed for use in emergency exits to allow wheelchair users to exit a room while not allowing entrance. The threshold is made of aluminum with a vinyl, neoprene, EDPM, TPE, silicone or pile insert, and comes with 10 1.5-inch wood screws. OPTIONS: Sure-Step non-slip abrasive coating; other screw types or anchors. DIMENSIONS (HxW): 0.5 x 5 inches. COLOR: Mill finish aluminum, dark bronze anodized aluminum, or gold anodized aluminum.

Bunk Bed Feeder Mount

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted feeder mount for a Kangaroo Pump feeder to a bunk bed for a child with Edwards Syndrome. There was no room for the feeder to be placed at the head of the bed; therefore, it was suggested that the child’s sleeping position be reversed. Despite the change in sleeping position the feeder could not be fixed directly onto the rails as they were too close together. A new bracket was added which holds the feeder just out from the

Bunk Bed Ladder Modification

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a customized bunk bed ladder for a child with Edwards Syndrome. To protect the child from injury the bottom three rungs of the bunk bed ladder needed to be screened off by putting mesh on the inside. However, this would make the child’s sister unable to use the ladder rungs safely to climb into the top bunk. A new rung unit was created which completely covers the bottom three existing rungs. The new rung unit has mesh fabric on the inside,

Bunk Bed Rails

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create customized bunk bed rails for a child with Edwards Syndrome. A side rail for the bunk was created using a steel tube frame padded with foam and covered in strong white mesh fabric and held in place by canoe clips. The rail is mounted on two brackets which fit over the frame of the bunk base, and can be easily lifted in and out of the bed. This adaptation is strong enough to avoid damage to the frame and safe for the child should she bang ag

Bush-N-A-Bag

The Bush-N-a-Bag is a ground blind designed for use by individuals with mobility, circulatory, or lower extremity disabilities or spinal cord injury or arthritis. This wearable blind can be used while standing, prone, or sitting. It can also be hung on a single tree or between two trees with stakes. Made of 3-D material, this blind has sleeves with elastic cuffs and pull-over headgear and a mesh design for ventilation. Machine washable and quick drying, the Bush-N-a-Bag includes a storage bag wi

Busy Bee Pediatric Postural Walker (Models 2413, 2423, & 2433)

The Busy Bee Pediatric Postural Walker is an adjustable child's walker designed for use by children with lower extremity, mobility, neurological, or walking disabilities. This lightweight walker encourages active postural control during standing and walking. Its torsional stiffness provides objective and and subjective stability. The walker is equipped with height-adjustable handles and solid rubber wheels for indoor and outdoor use. Noise-free external locks on the rear wheels prevent inadverta

Butler Inclined Platform Wheelchair Lift

The Butler Inclined Platform Wheelchair Lift is an interior wheelchair lift designed for use to enable wheelchair users to traverse stairways. The lift has two rails that mount on the landings at the top and bottom of the stairs with no modifications needed to walls. The power unit can be located almost anywhere at the bottom of the stairs including through an adjoining wall. The lift has three directional switches on the platform, at the upper landing, and at the bottom landing. All switches ar

Butler Residential Dumbwaiter (Models 1000, 2000, 3000, & 4000)

The Butler Residential Dumbwaiter is a dumb waiter designed for use by individuals with mobility disabilities or spinal cord injury. The motor for this modular electric dumbwaiter is located at the top of its shaft. The model 1000 (ultralite) car is made of powder-coated heavy gauge steel and comes with a vertical-rising vinyl curtain. Standard dumbwaiter cars are made of cabinet-grade birch ply with steel reinforcements front and rear and a scratch- and stain-resistant bottom liner. Three types

Butler Vertical Wheelchair Lift

The Butler Vertical Platform Lift (VPL) is an interior or exterior wheelchair lift designed for use by individuals with mobility disabilities or spinal cord injury. The lift has momentary (constant pressure) control switches on the platform, at the upper landing, and at the bottom landing. Outdoor installations include an enclosure. OPTIONS: Wall mounted controls; key-operated controls; automatically folding end ramp and guard that locks in place during operation. POWER: Uses standard residentia

Butt Ramp

The Butt Ramp is a portable threshold ramp designed for use by people who have lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. It is intended to help a person to get over thresholds or to get on or off of a curb. This straight aluminum ramp has a low rise and is available with wheel guards on both sides or on the left or right side only. The high end of the ramp butts up against the wall under the threshold, and it is raised by legs. The lower end

Buttock Support For Standing Frame.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Webbing and elastic support to hold a child against a standing frame or prone scooter board. Instructions for constructing a support of webbing, corset elastic, a D ring, and Velcro closure. Includes drawings. SKILLS REQUIRED: Sewing. AUTHOR: Hartrick, J TITLE: Equipment to Make: A Guide for Parents with a Child who has a Physical Disability REF: Melbourne, Australia: Health Commission of Victoria: p 15-16 NARIC CALL NUMBER: R3598 PAGES (including cove

Buzzard All-Terrain Chair

The Buzzard is an all-terrain wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. This all-terrain chair is intended for use in outdoor activities such as hunting, fishing, or getting around rough terrain. FRAME (LxW): Overall dimensions 60 x 36 inches. The chair has a steel frame with monoshock suspension; an optional gun rack is available. The frame is available in any color. UPHOLSTERY: Waterproof mesh upholstery. BRAK

Buzzaround 4-Wheel Scooter (Model Gb-104)

The Buzzaround 4-Wheel Scooter, model GB-104, is a lightweight, portable scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 40.75 x 21 inches. The turning radius is 34.5 inches and the ground clearance is 1.75 inches. The frame disassembles into two parts for transport. The scooter is available in blue or red. CONTROLS: 70 amp programmable PG S-drive. RWD: 24-volt sealed transaxle rear-wheel drive. SEAT: The 360-degree swivel seat is 15 inches deep

Buzzaround Lite 3-Wheel Scooter (Model Gb-103)

The Buzzaround Lite 3-wheel Scooter, model GB-103, is a lightweight, portable scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 37 X 21.25 inches. The turning radius is 31 inches and the ground clearance is 2 inches. The frame has rear suspension and disassembles into 4 pieces for transport. This scooter is available in blue or red. CONTROLS: 45-amp programmable controls. SEAT: 360 degree swivel seat with fold-down backrest. UPHOLSTERY: Black viny

Buzzy

The Buzzy is an add-on power unit designed for use with a manual wheelchair. This motorized tow device provides powered mobility for shopping and recreation without requiring the user to transfer. The user wheels up to the unit, grabs the handlebar, and pushes the thumb throttle. The unit has variable speeds. The Shopping model, which is intended for use in supermarkets and other stores, has a lower top speed than the Recreation model. An on-board microprocessor allows the user to reset the top

C Frame By Smirtwaite

The C Frame by Smirthwaite is a free standing suspension system for use with Smirtwaite’s sensory integration swing products for children with sensory integration disorders, physical and neurological disabilities. The Frame eliminates the need for permanent structural fixings, is easy to transport and assemble and is of modular construction. Made from tubular steel, it will support rigorous activity and can be fixed to the floor if required. The C Frame can be used with or without cushioned mat

C-Dock

The C-Dock is a wheelchair securement system designed for use by individuals with mobility disabilities or spinal cord injury traveling in vans. This one-piece floor bracket makes the system service friendly. It is equipped with a stainless steel top plate that attaches to the docking unit, providing sturdy protection and stay-open-jaws that provide unlimited exit time. Other features include jam-free latch parts and intuitive interfaces to keep users informed and in control. This device attach

C300 Corpus

The C300 Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 43 x 24.25 to 28.5 x 42.5 inches. Minimum turning radius is 25 inches. The C300 Corpus has a ground clearance of 3 inches and independent suspension. The base frame is available in crystal blue, vintage wine, metallic green, platinum silver, black onyx, popstar pink, titan blue and chili pepper red. Front anti-tippers are included.

C300 Corpus Junior

The C300 Corpus Junior is a powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 34.5 x 24.25 x 39.15 inches. Minimum turning radius is 40 inches. The C300 Corpus Jr. has a ground clearance of 3 inches and independent suspension. The base frame is available in crystal blue, vintage wine, metallic green, purple ice and chili pepper red. Front anti-tippers are included. CONTROLS: Integrated programmable R

C300 Ps

The C300 PS is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 43 x 24.25 to 28.5 inches. Minimum turning radius is 25 inches. The C300 PS has a ground clearance of 3.1 inches and independent suspension. The base frame is available in crystal blue, vintage wine, metallic green, platinum silver, black onyx, popstar pink, titan blue and chili pepper red. Front anti-tippers are included. CONTROLS: VR2 d

C350 Corpus

The C350 Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 42 x 24.25 to 28.5 x 44 inches. Minimum turning radius is 37 inches. The C350 Corpus has a ground clearance of 3.1 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, platinum silver and black onyx. Back anti-tippers are included. CONTROLS: Integrated progr

C350 Ps

The C350 PS is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 42 x 24.25 to 28.5. Minimum turning radius is 37 inches. The C350 PS has a ground clearance of 3.1 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, platinum silver and black onyx. Back anti-tippers are included. CONTROLS: Integrated programmable R-Net joysti

C400 Corpus

The C400 Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 42 x 24.25 to 28.5 x 44 inches. Minimum turning radius is 26 inches. The C400 Corpus has a ground clearance of 2.8 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, metallic green and black onyx. Back anti-tippers are included. CONTROLS: Integrated progra

C400 Corpus Junior

The C400 Corpus Junior is a powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 34 x 24 x 41.5 inches. Minimum turning radius is 45 inches. The C400 Corpus Jr. has a ground clearance of 2.8 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, metallic green and black onyx. Back anti-tippers are included. CONTROLS: Integrated pr

C400 Lowrider

The C400 Lowrider is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 42 x 24.25 to 28.5 x 42.5 inches. Minimum turning radius is 26 inches. The C400 Lowrider has a ground clearance of 2.8 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, metallic green and black onyx. Back anti-tippers are included. CONTROLS: Integrated

C400 Vs Junior

The C400 VS Junior is a powered stand up wheelchair designed for use by children with lower extremity, mobility, or severe physical disabilities or spinal cord injury. The C400 VS Jr. has both motorized propulsion and motorized standing. The user can move from a seated to a standing position with power assistance, and can drive the unit and move about in either a seated or standing position. FRAME (LxW): 40.5 x 24 inches. Rigid frame with push handles and a power standing unit designed into the

C500 Corpus

The C500 Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 49.5 x 25.75 to 28.5 x 52.5 inches. Minimum turning radius is 28 inches. The C500 Corpus has a ground clearance of 2.75 inches and 4-wheel adjustable independent suspension. The base frame is available in arctic white, crystal blue, vintage wine, platinum silver, metallic green and black onyx. Back anti-tippers are included. CONTROL

C500 Lowrider

The C500 Lowrider is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 49.5 x 25.75 to 28.5 x 47.5 inches. Minimum turning radius is 28 inches. The C500 Lowrider has a ground clearance of 2.75 inches and 4-wheel adjustable independent suspension. The base frame is available in arctic white, crystal blue, vintage wine, platinum silver, metallic green and black onyx. Back anti-tippers are included. CON

C500 Vs

The C500 VS is a powered stand up wheelchair designed for use by adults with lower extremity, mobility, or severe physical disabilities or spinal cord injury. This powered chair has both motorized propulsion and motorized standing. The user can move from a seated to a standing position with power assistance, and can drive the unit and move about in either a seated or standing position. FRAME (LxW): 38 x 28.5 to 25.75 inches. Rigid frame with push handles and a power standing unit designed into t

Cable-Waiter

The Cable-Waiter is a dumbwaiter designed for use by individuals with mobility disabilities. Available with wood, steel, or stainless steel cars, this unit carries cargo such as groceries, laundry, or household supplies up to 50 feet with up to six stops. The unit has momentary contact call/send push button controls at each landing and travels at 30 feet per minute. This dumb waiter is available with a carrying capacity of 50 or 100 pounds. A roll top gate and shelf are standard on the wood car

Caddy For Sewing And Knitting

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a customized free-standing caddy for sewing and knitting supplies for elderly individuals with heart problems and osteoarthritis. This individual had previously used a fabric storage bag fitted onto her favorite chair for her supplies. Her mobility needs changed and she obtained a new recliner-type chair and the bag no longer worked with this chair. A free-standing caddy was suggested to solve this problem. A wooden caddy with two posts an

Cairns Technical Gear Lap Blanket With Insulating Lining

The Cairns Technical Gear Lap Blanket with Insulating Lining is a wheelchair lap robe designed for use by individuals with mobility disabilities. It has a waterproof and windproof nylon outer shell with waterproof zippers and a padded fleece waist band. There is fleece lining in the upper area and 140 gram fiber-fill lining from the knee down. The foot bed has a rugged lining to withstand wear by shoes, with non-slip soles to keep feet on the foot rest. Other features include a dual zipper syste

Cairns Technical Gear Lap Blanket With Mild Weather Lining

The Cairns Technical Gear Lap Blanket with Mild Weather Lining is a wheelchair lap robe designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. It has a waterproof and windproof nylon outer shell with waterproof zippers, and a light lining appropriate for warmer weather. The lining in the foot bed is rugged for use with shoes. Other features include a padded fleece waist band, a zipper opening for quick cooling, a large lap pocket with waterproof zipp

Call Bell (Model 34500)

The Call Bell, model 34500, is a call signal designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. This device that sends out a tone when activated by a single switch connected to the jack on the Call Bell. Momentary contact triggers one tone of pre-determined length. Volume can be increased with the addition of a nine-volt battery. DIMENSIONS: 4 x 2 x 1 inches. WEIGHT: 8 ounces.

Cambered Sure Glide Brakes (Models 6274 & 6263)

The Cambered Sure Glide Brakes are rear brake attachments designed for use with 3- or 5-inch single fixed wheel attachments (sold separately). These brakes operate without interfering with the normal use of the walker. DIMENSIONS: Model 6274 are 10-inch extensions and model 6263 are 13-inch extensions.

Cambrian Elevator

The Cambrian Elevator is a home elevator designed for use by individuals with mobility disabilities. This residential elevator features automatic sliding doors on the cab and on each landing; infrared safety light curtain; digital position indicators in the elevator and over each landing; and custom fixtures to coordinate with interior decoration. OPTIONS: Solid wood paneling in oak, maple, or cherry; mirrors or glass cab walls; touch-screen controls; and television or music in the cab. COLOR: C

Cambridge Elevating Deck Lift

The Cambridge Elevating Deck Lift is an outdoor home elevator designed for use by individuals with mobility, lower extremity, or walking disabilities or spinal cord injury. This compact unit can lift an individual using a wheelchair or walker up to six feet to the level of a porch or doorway. The unit is engineered to endure harsh weather conditions, with weather-protected controls and powder coated panels to resist corrosion. A manual lowering function is included. Custom cab configurations are

Cambridge Elevating Limited-Use / Limited-Application Elevator

The Cambridge Elevating Limited-Use/Limited-Application (LU/LA) Elevator is an elevator designed to provide wheelchair access in schools, libraries, low rise commercial buildings, churches, and multi-family housing. This unit combines the functionality of a commercial elevator with the style options of a residential elevator, including various finishes and door systems to allow the elevator to blend into the surrounding decor. Features include a hydraulic drive system and controls; fire-rated sl

Cameleon

The Cameleon is a voice output communication aid and environmental control unit designed for use by individuals with communication or speech disabilities. This dynamic communication aid provides synthesized speech from simple messages to complex sentences, using symbols, text, or both. It has a large, bright screen that can display symbols from a range of communication libraries and languages, as well as pictures from digital cameras and other sources. Input options include a mouse, keyboard, sw

Camera Holder

CUSTOM ADAPTATION PURPOSE: To provide a means for an individual with quadriplegia to hold and operate a digital camera. Made of steel, this mount is equipped with two foam-covered handles, one above the other. The user places the top handle in his/her palm and the bottom handle holds the hand in position, supports the back of the wrist, and can be rested on a stable surface as needed. The handles are attached to a frame that screws into the tripod mount on the bottom of the digital camera. The

Canadian Padded Transfer Board

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Padded transfer board with a plinth which fits into the forward arm rest socket of a standard wheelchair. Transfer board made of 15 by 6 1/2 inch plywood, a base plate of iron or steel, an iron water pipe, a sheet (10 by 6 inches) of firm leather or plastic, foam padding and a slippery fabric cover. The board is used in place of either arm of the wheelchair. Includes instructions and diagrams. SKILLS REQUIRED: Woodworking. Upholstering. AUTHOR: Wightwi

Candy Bands (Model 720 To 722)

Candy Bands are elbow, arm, or shin protectors designed for use by individuals with mobility or severe physical disabilities. These Tootsie-Roll-shaped terry tubes have a slender ribbed end and a wider ribbed end for the elbow area. They slide on and off and are machine washable. These multi-use terry protectors warm forearms, cushion elbows or shins, or absorb chin wetness. SIZES: Child (model 720), adult (model 721), and extra-large (model 722). DIMENSIONS The child size is 7 inches long and 1

Candy Corn Proximity Sensory Switch

Candy Corn Proximity Sensor Switch is a highly sensitive switch designed for use by individuals with neurological or severe physical disabilities such as cerebral palsy and spinal cord injuries. This mechanical switch does not require physical touch to activate. The user can wave their hand or another portion of their body within 10 millimeters of the switch to activate. Visual and auditory cues occur when the switch is activated. Orange lights activate for visual cues and a beeping sound is eli

Cane / Crutch Bag (Model 70220)

The Cane Bag, model 70220, is a carrying bag for all single shaft canes and crutches. This lined bag is made of coated nylon and attaches with adhesive Velcro. The caddy features a spring-action hex frame opening which is opened by simply placing the fingers in the middle of the frame and popping it open, and closed by pushing on the outside of the frame. Opening and closing the bag does not require manual dexterity or strength. DIMENSIONS (WxHxD): 8 x 5.25 x 2.25 inches. COLOR: Royal blue, mage

Cane / Crutch Holder (Model 70324)

The Cane/Crutch Holder, model 70324, is a spring-loaded clip designed to grip any cane or crutch to a table, desk, or counter. The clip has a foam rubber pad on each side to keep it in place. The holder will accommodate shafts from 5/8-inch to 1-inch in diameter.

Cane Clip (Model 70327-0007)

The Cane Clip, model 70327-0007, is a cane holder with an adhesive pad for attachment to any flat vertical surface. The base also has two screw holes for permanent mounting to the edge of a desk, wall, cabinet, or other surface. The clip will accommodate canes up to 1 inch in diameter. Sold in packages of 6. DIMENSIONS: 2 7/8 x 13/16 inches; projects 1 7/8 inches from the surface.

Cane Clip With Table Clamp (Model 70325-0001)

The Cane Clip with Table Clamp, model 70325-0001, is a cane holder designed to accommodate any size cane securely, while allowing easy release. The device has a spring-action clamp with grooved, soft plastic rollers that will not mar the cane's shaft. The rubber-lined clamp fits onto table tops or counters up to 1.75 inches thick and is secured by a clamping screw with a swivel glide. DIMENSIONS: 3.75 x 3.5 x 2 inches.

Cane Hand Loop (Model H70326)

The Cane Hand Loop, model F70326, is a wrist strap designed to prevent cane users from dropping their ambulation aid. The strap has a Velcro fastener which wraps around the cane shaft and slips over the wrist.

Cane Holder

The Cane Holder is designed for use by individuals with mobility disabilities. This device snaps on to the cane shaft and slides over the edge of a table or counter or similar surface, enabling the user to hang the cane within reach. DIMENSIONS: Holds canes up to 7/8-inch in diameter. COLOR: Black or black and white.

Cane Holder (Model 70325-0002)

The Cane Holder, model 70325-0002, is a double-clip holder that allows a cane or crutch to be suspended or secured against any tubular structure such as a table leg, walker, commode, wheelchair, or lawn chair. The non-marring, plastic clips have grooved gripping surfaces. DIMENSIONS: 3 x 2 x 1.75 inches.

Cane Holder (Model O113)

The Cane Holder, model 0113, is designed to stabilize crutches or canes against a counter or table when not in use. The small unit clips onto the cane/crutch at any height, and the holder rests on the edge of any horizontal surface to balance the cane/crutch by gravity.

Cane Holder For Walking Frames

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted walker modification that allows an individual with balance, mobility and walking disabilities to easily carry and store a walking stick or cane to their walker. An elderly gentleman uses his walker with seat for extra support and the chair portion when he needs to rest. When shopping in some of the more crowded shops at the mall, the gentleman realized that being able to park his walker outside the store and use his cane fo

Cane Tips (Models 40850-4, 40851-4, 40852-4 & 40853-4)

The Cane Tips are designed to replace the existing tips on straight, offset, and quad canes. These rubber tips have metal reinforcements. DIMENSIONS: Model 40850-4 fits canes 1 inch in diameter. Model 40851-4 fits canes 7/8 inch in diameter. Model 40852-4 fits canes .75 inch in diameter. Model 40853-4 fits canes 5/8 inch in diameter. COLOR: Black.

Cane Valet

The Cane Valet is a cane holder designed to allow canes to be hung from the edge of a desk or table or to be wedged under the edge of a desk or table. This small square device snaps on to the shaft of most canes and a small rubber band placed around the end hooks maintains a secure grip.

Cane With Flashlight

--- DO IT YOURSELF ENTRY --------- PURPOSE: To create a cane with an attached flashlight for individuals with balance, lower extremity, mobility and walking disabilities. To start, make two holes in a plumbing clip and then pass the wire through them to create a loop in which the flashlight fits securely. When the wire loop is complete, make sure that the clip fits the cane. To attach the flashlight to the clip assembly, apply pressure to the wire as the flashlight is inserted to keep the flashl

Cant-I-Levered Deluxe Pushbutton Drop Arm With Padded Back And Seat (Model 98204)

Fixed height commode. Cantilevered design allows unrestricted left-to- right leg movement for easy transfer. Rust resistent, chrome plated steel frame with padded back and seat, has foam hand grips. Arm folds down by pushing spring button on front of frame. Open frame design allows for over the toilet use. Removable backrest. Pail, lid, and splash shield standard. Overall width 22 inches. Depth 22 to 24 inches. Adjustable height 31 to 36 inches. Adjustable seat height 20 to 25 inches. Adjustable

Canvas Walker Seat (Model W1218)

The Canvas Walker Seat, model W1218, is a seat for a walker designed for use by people with mobility and balance disabilities. Designed for use on walkers with dual front crossbars. this seat installs on four points of the frame and folds out of the way when not in use. CAPACITY: 250 pounds.

Capella 45

Capella and Capella45 is a dynamic tilt-in-space wheelchair designed for individuals with mobility or neurological disabilities. The chair adjusts to redistribute the user’s body weight for optimal positioning purposes. The Capella offers 20 degrees of tilt, standard on-chair adjustment seating system, a range of seat-to-floor heights and a streamlined design.

Capstan Handrim

The Capstan Handrim is a wheelchair handrim designed for people with lower extremity or mobility disabilities or spinal cord injury. This aluminum alloy handrim is plastic-coated intended for users with good arm and shoulder strength but poor hand and finger grip. This handrim is fitted 8 projections at either 45 or 0 degrees (vertical). There are 3 different mounting systems for the hand rims: standard tab, close-in tab, or riv-nut. OPTIONS: 10 or 12 projections. SIZES: For 20-, 22-, 24-, 25-,

Car Caddie

The Car Caddie is a car transfer aid designed for use by individuals with mobility disabilities. This figure-eight style aid is constructed of nylon and loops around the car door window frame. The cushioned grip provides security and assistance while entering and exiting the automobile.

Car Slide (Model 70406)

The Car Slide, model 70406, is a transfer aid designed for persons who have difficulty getting positioned on a car seat, chairs, or beds. The device consists of a waterproof denim top and a slippery vinyl bottom. Large hand loops are made of 1-inch webbing and located on each side of the rectangular mat. DIMENSIONS: 30 x 35.5 inches. WEIGHT: 1 pound 9 ounces.

Car Slide.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: A fabric slide to be used to help position a person on a car seat. Slide made with about a yard of slippery material (nylon) sewn to a yard of nonslippery material (denim) with strong fabric or webbing sewn in three long ovals to make handles. The nylon side goes against the car seat for ease of sliding. Includes diagram and photograph. SKILLS REQUIRED: Sewing. AUTHOR: Kernaleguen, A TITLE: Clothing Designs for the Handicapped REF: Edmonton, Alberta, C

Car-Go-Mate Scooter Lift (Models Flc-0800-S & Flc-0800-Sb)

The Car-Go-Mate Scooter Lift is a hitch mounted scooter lift designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This exterior scooter lift installs on vehicles with a Class I or Class II 1.25-inch hitch receiver, and can handle scooters with a maximum width of 24.5 inches and a maximum wheelbase of 32 inches. The lift automatically clamps the scooter to the lift platform. It has a lifting range of 28 inches and a locking arm adjustment range of 3

Car-Go-Mate Wheelchair Lift

The Car-Go-Mate Wheelchair Lift is a hitch-mounted wheelchair carrier designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This exterior wheelchair lift installs on vehicles with a Class I or Class II 1.25-inch hitch receiver to hold manual wheelchairs. The wheelchair is automatically clamped to the lift platform, which folds and unfolds with the assistance of a gas-spring counterbalance. The lift is set low to reduce rear vision obstruction. The l

Carbon Core Wx2.5

The Carbon Core WX2.5 is a rear wheelchair wheel for people with mobility disabilities, spinal cord injuries and other people who use manual wheelchairs. This very lightweight wheel is has a rim of heat treated 6061 T6 aluminum with a double-walled design, 7075 T6 aluminum spoke nipples and 20 continuous carbon fiber spokes. It fits standard .5-inch axles. DIMENSIONS: Available in 24 inch or 25 inch diameter. CAPACITY: 250 pounds. WEIGHT: 2.5 pounds (24 inch) or 2.6 pounds (25 inch). COLOR: Blac

Carbon Series Back Support

The Carbon Series Back Support is a wheelchair back support designed for use by individuals with mobility disabilities or spinal cord injury. The unit consists of a carbon shell, cushion and cover. It has an active support contour of 2.5 inches. The unit is compatible with Fixed Elite, 2-Point Pro and Quick Release mounting systems. The fixed positioning unit clamps to 1-inch tubing; all other tubing sizes require spacers. The adjustable positioning unit clamps to 0.6- through 1-inch tubing, rou

Care Chair 1, 2, & 3

Upholstered chair with powered elevating seat. Three models; straight, semi reclining, and fully reclining. Operated by cord mounted rocker switch, with optional toggle switch. Assorted colors and patterns. Soil resistant fabrics available. U.L. listed electrical components and 14 gauge steel lift mechanism. 2 year warranty on lift and recliner mechanisms, 1 year on motor.

Care Chair Classic

Care Chair Classic is a manual wheelchair designed for shopping use by individuals with mobility disabilities. Wire baskets attach to full length armrests of a standard wheelchair, which is supplied with the basket, or to rear of wheelchair, or both front and rear. Wheelchair has standard 24 inch rear wheels with hand rims. 8 inch front casters. Basket is 42 inches long, 24 inches wide and 38 3/4 inches from the floor. Basket capacity is 40 pounds, front or rear or 80 pounds total.

Care Covers For Crutches

Axillary crutch underarm and handgrip cushion covers. Washable. Polyester blend. Slips over rubber crutch underarm cushions and hand grips. Velcro closure. Fits all standard crutch pads.

Care Steps (Model 19150)

Care Steps are slipper socks are designed for wear by women with arthritis or who use wheelchairs. Made of acrylic and stretch yarns, these soft terry socks have skid-resistant treads on the bottom for safe walking or wheelchair transfers. SIZES: Regular or large. COLOR: Assorted colors.

Care Trak Mobile Locator

The Care Trak Mobile Locator is a wireless signal transmitter and wandering patient system designed for use by caregivers of individuals with Alzheimer's Disease or cognitive, neurological, or mobility disabilities. It can also be used by law enforcement or emergency response personnel to locate a lost person. This portable device can be used alone or with the Care Trak Sentry Perimeter System (see separate entry) to locate an individual wearing a Care Trak Wrist Transmitter (see separate entry)

Care Trak Sentry Perimeter System

The Care Trak Sentry Perimeter System is a wandering patient system designed to prevent individuals with Alzheimer's Disease or cognitive, neurological, and balance disabilities from entering or exiting a specific area. The system features a monitoring unit with controls to adjust the range of the invisible perimeter, a Care Trak wrist transmitter, and the Care Trak Mobile Locator (see separate entries). The system establishes an invisible circular boundary with a radius of 50 feet to 300 feet,

Care Trak Wrist Transmitter

The Care Trak Wrist Transmitter is a wireless signal transmitter designed for use by caregivers of individuals with Alzheimer's Disease or cognitive, neurological, or mobility disabilities in a clinical setting. This portable device is worn on the wrist or ankle. The transmitter, which is water resistant, puts out a silent constantly pulsating radio signal. The unit consists of three components - the transmitter, a plastic transmitter case, and a band that attaches to the case. Three types of ba

Care-Give-R-Lift Bed Sled

The Care-Give-R-Lift Bed Sled is a turning aid designed for use with individuals with severe physical or mobility disabilities or spinal cord injury. Designed for repositioning a person in a bed or recliner the device is made of cotton canvas with heavy nylon webbing handles across the width at two locations. A removable bed pad or terry cloth pad can also be placed on the device for comfort. The unit is hand- or machine-washable in warm water and should be air dried. DIMENSIONS(LxW): 40 x 30 in

Care-Give-R-Lift Skid Seat ( Perforated Suede Vinly)

The Care-Give-R-Lift Skid Seat (Perforated Suede Vinyl) is a transfer aid designed for use with individuals with severe physical or mobility disabilities or spinal cord injury. Used for repositioning an individual into a seated position in a wheelchair or other chair with little or no strain on the caregiver, the device is designed for use with a gel cushion and is made of perforated suede vinyl backed with non-slip fabric. Perforations allow air circulation. The suede surface is soft to the to

Care-Give-R-Lift Skid Seat (Canvas) (Models A & B)

The Care-Give-R-Lift Skid Seat (Canvas) is a transfer aid designed for use with individuals with severe physical or mobility disabilities or spinal cord injury. Used for repositioning an individual into a seated position in a wheelchair or other chair with little or no strain on the caregiver, the device is made of cotton canvas. A snap-close tether stap holds the seat on the chair while the individual is being seated. The device can be hand washed and air dried. Model A has full loop handles s

Carebag Bedpan Liner

The CareBag Bedpan Liner is a bedpan pad and liner designed for use by individuals with severe physical or mobility disabilities or spinal cord injury and their caregivers. Designed to safely collect, transport and dispose of body fluids after bedpan use, the polyethylene liner has double soldered seams and a pull tie closure, and comes with an absorbent GelMax pad that converts liquids to gel. The pad can absorb up to 16 ounces of organic liquids, eliminating spillage, odor and the spread of pa

Carebike

The Carebike is a cycle attachment for wheelchairs. The unit comprises an anodized aluminum platform on wheels that attaches to a 21-speed comfort bike. It is designed to offer friends, family members and caregivers the convenience of taking a bike ride while still being close at hand to assist the wheelchair user. The wheelchair fits on the platform with the Carebike attached at the rear, giving the biker complete steering, stopping, and starting control.

Caregard Personal Emergency Response System (Model 80-737)

CareGard Personal Emergency Response System, model 80-737, is an emergency alert system designed for use by seniors, people with mobility or balance disabilities, or individuals at risk for medical emergencies. The system includes a wireless panic button and a table-mounted panel with an integrated two-way voice module. In addition to the panic button, the system can also support up to 24 wireless sensors, GE Interlogix repeaters, and remote phone control. POWER: The panel uses household current

Caregiver Call Signal

CUSTOM ADAPTATION PURPOSE: To provide a means for an individual with severe phyical disabilities to summon a caregiver. This device was created using a doorbell chime with a remote control. The chime unit is carried by the caregiver and the remote is used by the individual summoning assistance. Because the individual did not have enough finger strength to press the button on the remote, a socket with a long cord was attached to the remote and connected to a large, soft button that was accessibl

Carelift Wheelchair Lift

The Carelift Wheelchair Lift is a commercial elevator designed for use by individuals with walking, mobility or lower extremity disabilities, spinal cord injury or arthritis and others who use wheelchairs. The Carelift is a heavy-duty, fully enclosed elevator with a manual or automatic swing door. It can be fitted into a new or existing building with up to 6 stories. The elevator requires an 8-inch pit and 96 inches of overhead space. The interior of the cab has Melamine wall panels with stainle

Carepeutic Betaflex Royal Electronic Smart Miniexercise Bike

The Carepeutic BetaFlex Royal Electronic Smart MiniExercise Bike is an arm or leg bicycle exerciser designed for use by individuals with upper extremity, lower extremity or mobility disabilities or arthritis. This cycle can be used on the floor or table, and it has four speeds for an adjustable workout and reverse pedaling. The unit also has a timer and display screen to track speed, distance, and calories. This unit features quiet operation and automatic shut-off. DIMENSIONS (HxLxW): 12 x 17 x

Carepeutic® Knee And Joint Physiotherapy Massager

The Carepeutic® Knee and Joint Physiotherapy Massager is a personal massager that incorporates four different green therapy methods: heat moxibustion, infrared heat therapy, magnetic therapy, and vibrating massage. It is designed for individuals with redness on the discreet joints, swelling, pain and movement disorders such as muscle atrophy, and permanent joint dysfunction. This massager can be used following participation in sports or outdoor activities, such as hiking, driving or working for

Cares Child Aviation Restraint

The CARES Child Aviation Restraint provides additional support for children with mild to moderate physical disabilities while travelling on an airplane. It can accommodate children from 22 to 75 pounds. The CARES can be used in any seat on the plane excluding the emergency exit rows. The CARES Child Aviation Restraint is a belt-and-buckle device that works with the seat belt on the airplane. The combination of the two provides the same level of safety as a car seat for your child. CARES comes c

Carex Canvas Walker Basket

The Carex Canvas Walker Basket is a carrying bag designed for use by individuals who carry items when using a walker. The bag attaches to the walker with elastic straps to hold items upright. Other features include a large space for personal items, collapsible hinges for travel and flat storage, and a privacy cover that keeps personal items protected and concealed. This bag fits most walkers. DIMENSIONS (HxDxW): 7.75 x 6 x 16.5 inches. WEIGHT: 0.5 pounds.

Carex E-Z Grabber (Models P605 & P606)

The Carex E-Z Grabber is a reacher designed for use by individuals with upper extremity disabilities. This reacher has a 90-degree rotating arm for grasping objects from above or below. A locking tab holds the item in place for users with limited strength. This reacher also features an EZ Twist Shaft and wrist support. DIMENSIONS: Model P605 is 26 inches long and model P606 is 32 inches long.

Carex E-Z Lock Toilet Seat With Arms

The Carex E-Z Lock Raised Toilet Seat with Armrests is a molded elevated toilet seat designed for use by individuals with mobility or balance disabilities. Designed to provide assistance for those with bending and sitting difficulties, this unbreakable polyethylene unit features a locking mechanism that secures the seat to the toilet without tools and built-in padded armrests provide additional security. The unit adds 5 inches of height of most standard and elongated toilet seats. DIMENSIONS (D

Carex Easy-Up Bed Rail

The Carex Easy-Up Bed Rail is a side rail designed for use by individuals with mobility disabilities. Features include a two-in-one design that provides the security of a bed safety rail with the convenience of a padded bed support bar and a single-step release that can be easily raised and lowered by a caregiver. Designed for home use with a powder-coated compact frame, this bed rail fits any standard sized bed and can be assembled without the use of tools. DIMENSIONS (HxDxW): 22 x 1.50 x 41 in

Carex Enablers Cane Holder (Model En13Crd)

The Carex Enablers Cane Holder, model EN13CRD, is a cane holder designed to keep canes upright and within reach. Comprised of an oval base with two gripper fingers, this plastic holder features self-adhesive tape on the back for application where needed. DIMENSIONS (HxDxW): 1.5 x 1.5 x 2.31 inches.

Carex Enablers Safety Treads (Model En33Crd)

Carex Enablers Safety Treads, model EN33CRD, are designed to prevent slipping in tubs, showers, and on stairs. Sold in sets of eight, these waterproof treads are self-stick and can be installed on virtually any clean, dry surface. DIMENSIONS (LxW): 10 x 0.75 inches.

Carex Male Urinal

The Carex Male Urinal is a male sheath urinal designed for use by men with mobility disabilities, severe physical disabilities, urinary incontinence, or spinal cord injury. Made of durable plastic, this urinal holds 1000 cubic centimeters with graduated marks to measure output. It is equipped with a cover and easy grip L-shaped handle and can be used in several positions while lying in bed. The unit can be washed with soap and water.

Carex Spoon and Fork Holder , Model EN37CRD

Carex Spoon and Fork Holder are designed for people with  arthritis, or those with dexterity disabilities or weakened grip. Their design helps to create a larger surface for holding eating utensils and are easily removable to take along when eating.

Carex White Wall Grab Bars

Carex White Wall Grab Bars are wall grab bars designed for individuals with balance disablities. These grab bars are made of durable heavy duty steel tubing with a powder coat finish. DIMENSIONS: The bars range are available in 12, 16, 18, or 24 inches long with a depth of 1.25 inches and height of 1.5 inches. Each bar requires an additional 2.5 inches in length and 2.5 inches in height. COLOR: White.

Cargo 16 Wheelchair Pouch

Wheelchair back pouch. Cordura nylon fabric with look of cotton duck. 1, 000 cubic inches inner space. Removable shoulder strap. Full width outer and back pockets. Zipper opening top. Strap loops on pouch slip over wheelchair push handles folds with wheelchair. Specify narrow or regular wheelchairs, 12 to 14 inches wide.

Cargo Wedge 250

The Cargo Wedge 250 is a cargo area threshold cover designed for use by people with mobility disabilities who use wheelchairs or scooters. The Cargo Wedge is a large mat made of recycled rubber that overlays a van's or minivan's cargo area to raise the level of the cargo area's floor to the same level as the rear door threshold. The Cargo Wedge can be trimmed with a utility knife or a power saw for a custom fit. It has a non-skid surface. DIMENSIONS (HxLxW): 2.5 x 24 x 48 inches. CAPACITY: 850 p

Caribou

Caribou is a standing frame designed for use by individuals with limited upper and lower strength and mobility associated with cerebral palsy and upper motor neuron disorders. A good standing position can be achieved for people with spasticity, contractions, and circulatory deficiencies. The frame supports the prone or supine standing position. It has the ability to switch from a horizontal to a vertical position. The Caribou is built with a baseboard and a series of optional upper body supports

Caring Responders

Caring Responders is an emergency alert system with monitoring service designed for use by seniors or individuals with disabilities who are at risk of incapacitating accidents. It provides a wireless alert system that allows the user to summon help in case of a household accident or emergency by touching a button worn around the neck or wrist or on a belt. Responders will alert family members, neighbors, and emergency services. The system has three key parts: a panic button, a base unit, and a R

Carlite Series Ramp

The Carlite Series Ramp is a portable ramp designed to provide wheelchair access for individuals with lower extremity or mobility disabilities or spinal cord injury. Made from aluminum, the ramp has an anti-slip tread with safety curbs on the sides. DIMENSIONS: Standard lengths are 1 to 6 feet and standard widths are 30 to 36 inches. Custom sizes are available.

Carony Transportation System

Carony is a transport wheelchair base designed for use by individuals with severe physical disabilities or mobility disabilities who have difficulty entering and exiting minivans, pickup trucks, and full-size vans. The system operates in conjunction with a Bruno Turny or Turnout powered seat base. The user glides along a rail from the vehicle seat onto the wheeled base, remaining seated the whole time. A hand control glides the seat out of the vehicle then lowers the seat. The Turny or Turnout p

Carpet Threshold (Models 503S, 504S, 505S, 506S, & 508S)

The Carpet Threshold, models 503S, 504S, 505S, 506S and 508S, is a threshold ramp designed for use to allow wheelchair users to move between carpeted areas. The threshold comes with 10 1.5-inch wood screws. OPTIONS: Sure-Step non-slip abrasive coating; other screw types or anchors. DIMENSIONS (HxW): 0.875 x 2 inches (model 503S); 0.5 x 2.13 inches (model 504S); 0.45 x 0.81 inches (model 505S); 0.81 x 4 inches (model 506S); 0.69 x 1.81 inches (model 508S). COLOR: Mill finish aluminum, dark bronze

Carpeted Double Scooter (Model Ap 245)

The Carpeted Double Scooter, model AP 245, is a scooter board designed for use by children with lower extremity, mobility, or neurological disabilities. This scooter board is made of plywood covered with padded carpeting, and has eight ball bearing casters. The double board can be separated into two smaller scooters by releasing a lock hitch. DIMENSIONS (LxW): 32 x 12 inches (double scooter); separate scooters are 16 x 12 inches. The board is 5/8 inches thick. COLOR: Boards are available in asso

Carpeted Double Scooter Board (Model Bk8154)

The Carpeted Double Scooter Board, model 8154 is a scooter board designed for use by children with lower extremity, mobility, or neurological disabilities. Constructed of solid plywood padded and covered with plush carpet, this double scooter facilitates optimal movement, providing excellent sensory stimulation. It also aids in the development of head and trunk control and arm strength in non-ambulatory children. The scooter can be separated by releasing the Sure-Lock hitch into two 12 inch by 1

Carpeted Scooterboard (Model 31717)

The Carpeted Scooterboard, model 31717, is designed primarily for use with children to encourage extension, provide vestibular stimulation, and promote head and upper trunk control. The unit is padded and carpeted, has chamfered corners, and includes 4 ball casters. DIMENSIONS: 12 x 16 inches. The casters are 2 inches in diameter. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 days from the date of purchase.

Carpeted Single Scooter Board (Model Bk8158)

The Carpeted Single Scooter Board, model 8158 is a single scooter board designed for use by children with lower extremity, mobility, or neurological disabilities. Constructed of solid plywood padded and covered with plush carpet, this single scooter facilitates optimal movement, providing excellent sensory stimulation. Other features include easy glide ball bearing casters securely welded and bolted through boards. DIMENSIONS: 12 x 16 inches. CAPACITY: 125 pounds. WEIGHT: 7 pounds.

Carriage Cart.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Transport a child in a hip spica cast; also useful as a feeding positioner. Baby carriage base adapted with padded wooden platform (48 by 16 1/2 inches by 1/2 inch). Platform attached to carriage base at both ends with pipe strap, screws, and lock washers. Fitted snugly between carriage handles; overhangs base by 4 1/2 inches at handle end, 3 1/2 inches at front end. Hip and chest straps made of 3 inch wide elasticized material with velcro closures to

Carrie Activity Base (Model Pc 4641C)

The Carrie Activity Base, model PC 4641C, is designed to elevate and add mobility to the Carrie Seat for peer interaction and activities. The base is designed for use with the Elementary and Pre-School Carrie Seats (see separate entry). Rear wheels allow for moving the seat around the immediate area.

Carrie Potty Seat (Models Pc 2771P & Pc 2771J)

The Carrie Potty Seat is a child commode designed to be positioned over a toilet or used as a free-standing unit. The shape of the commode maintains the user's legs in slight flexion and abduction to encourage bowel and bladder functions. Lateral supports and a tray help provide trunk stability. A built-in anti-thrust seat maintains pelvic positioning. The seat is made of Tumble Forms' high-density foam and covered with a flexible coating, making the Potty Seat washable, seamless, impervious to

Carrier Wheelchair

---- PROTOTYPE --------- PURPOSE: To develop a prototype robotic wheelchair which allows individuals with mobility disabilities and wheelchair users greater independence and the capacity to traverse any terrain and situation. Developed as semester project at the University of Applied Arts in the Studio Industrial Design 2 Esslinger (www.creativednaaustria.com). The CARRIER wheelchair’s frame is specifically shaped to maneuver over a commode and adapted with a “trap door” allowing the user to us

Carriers For Crutches And Tripod

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To provide a custom adapted crutches and tripod carriers for an adult with spastic paraplegia and oral dyspraxia. The crutch holder accessory available from the wheelchair manufacturer was too small for the tripod and would be difficult to import from the United States. The custom adapted design began by taking an aluminum base panel and bolting it to the anti-tip legs on the back of the chair. To make the holders for the crutches and the tripod, pla

Carry All Pouch (Model 976)

The Carry All Pouch, Model 976 is a wheelchair and walker carry-all with four accessible pockets. The pouch is secured with Velcro fasteners over the front of the arm of a wheelchair or a walker bar. DIMENSIONS: 9.5 x 1.25 x 13 inches.

Carry All Pouch For Walker (Model 1116)

The Carry All Pouch for Walker, model 116, is a carrying bag made of blue denim designed to attach to the side of a wheelchair or walker. The pouch has one inside pocket and 3 outside pockets with velcro closures.

Carrying Aids For Wheelchairs

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with Friedrich's ataxia to carry staws and plastic bags with her. To ensure straws are available when needed, carry them in a round plastic toothbrush holder fastened with Velcro to the underside of one arm of the wheelchair. To ensure a supply of plastic bags are available for garbage, snacks, or clean-up bags, hooks dog clean-up bags in the dispenser they come in to the wheelchair. MATERIALS: Toothbrush holder, straws, dog clean-up bag

Carrying Basket (Model 7715)

Large vinyl coated wire basket attaches with hooks to the top of the walker frame. Easy to remove or install.

Carrying Pouch (Model 7719)

Zippered carrying pouch attaches to the top of the walker frame with velcro straps. Three side pockets and a large central storage area. Washable fabric.

Cart Smart Rolling Shopping Bag

The Cart Smart Rolling Shopping Bag is a folding wheeled shopping bag designed for use by individuals with upper extremity or mobility disabilities or arthritis. Made of heavy poly material, this bag has nylon mesh pockets on both sides and on the front. The front pocket with flap is equipped with Velcro closure. The bag's top opening has a full-length nylon zipper with a large zipper pull. Other features include a four-point bottom support platform to enable the bag to stand independently and h

Casbar, The

The Casbar is a wheelchair push handle extension designed to enable a companion or caregiver to push a wheelchair using one hand. The ends of this C-shaped coated steel bar fit over the existing wheelchair push handles and lock in place using two large adjusting knobs to create a single stroller-style handle. On flat surfaces, this device enables the chair to be pushed and controlled with one hand and on inclines and ramps, using two hands makes pushing less difficult than when using the standar

Castor Cart

Vacuum formed ABS plastic base with 8-inch wheel on each side and a caster in the back. Back support is molded into base, with front extension for leg support in long-sitting position. Removable tubular steel push handle fits into receptacle at back of cart. Adjustable head support, pommel, chest belt and pad, seat and back cushions can be added. Child propels cart by pushing wheels. Low to floor for independent transfers. Seat belt attached to base. One size, for children 9 months to 4 years. B

Catalyst 4 And Catalyst 4 Super Low

The Catalyst 4 and Catalyst 4 Super Low are lightweight folding adult manual wheelchairs designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of 6061-T6 aircraft aluminum. It features an offset axle plate that offers rear seat height adjustability, and the axle plate can be reversed for amputees. A heavy duty frame (350 pounds capacity) and rear anti-tips are optional. The frame is available in a varie

Catalyst 4C

The Catalyst 4C is a lightweight folding adult manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of 6061-T6 aircraft aluminum. It features an offset axle plate that offers rear seat height adjustability, and the axle plate can be reversed for amputees. A heavy duty frame (350 pounds capacity) and rear anti-tips are optional. The frame is available in a variety of colors in matte or

Catalyst 4Ttl

The Catalyst 4TTL is a lightweight folding adult manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of 6061-T6 aircraft aluminum. It features an offset axle plate that offers rear seat height adjustability, and the axle plate can be reversed for amputees. A heavy duty frame (350 pounds capacity) and rear anti-tips are optional. The frame is available in a variety of colors in matte

Catalyst 5

The Catalyst 5 is a lightweight folding adult manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of 6061-T6 aircraft aluminum. It is available in two optional versions - Heavy Duty Option and Transit System. A depth adjustable rear frame also is optional that allows for adjustments of 2 inches forward and 3 inches forward. Rear anti-tips are available for all versions. A variety of

Catalyst 5 Ti

The Catalyst 5 Ti is a lightweight folding adult manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of Ti3AL/2.5V alloy. It is available in two optional versions - Heavy Duty Option and Transit System. Aluminum cross braces are standard; titanium cross braces are standard. Rear anti-tips are available for all versions. A variety of colors are available. SEAT (WxD): 14 to 19 x 14 to

Catalyst 5Ttl

The Catalyst 5TTL is a lightweight folding adult manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of 6061-T6 aircraft aluminum. It is available in two optional versions - Heavy Duty Option and Transit System. A depth adjustable rear frame also is optional that allows for adjustments of 2 inches forward and 3 inches forward. The frame can be ordered with the center of gravity set i

Catalyst 5Vx

The Catalyst 5Vx is a lightweight folding adult manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of 6061-T6 aircraft aluminum. It is available in two optional versions - Heavy Duty Option and Transit System. The frame can be ordered with the center of gravity set in the rear, center or forward by axle position. Rear anti-tips are available for all versions. A variety of colors are

Catalyst Spark

The Catalyst Spark is a child's manual wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. Elements of this wheelchair can be adjusted independently to accommodate the child's growth. FRAME (WxD): 10 to 16 x 12 to 18 inches, in 1-inch increments. The frame width is expandable up to 2 inches in 1-inch increments up to a maximum of 16 inches. Swing away front frame is standard; super low swing away frame is optional. Front fra

Catch-All (Model Wh190)

The Catch-All WH190 is a under seat net pocket designed for individuals who spend long periods in wheelchairs. Designed for use with rigid ad folding wheelchairs, this device securely attaches with Velcro hook and loop to the bottom horizontal and rear vertical frame tubing forming a catch all net shelf under the wheelchair seat. DIMENSIONS: The widths ranges are 10, 11 to 14, 13 to 18, and 17 to 24 inches. COLOR: Black.

Catheter Cover (Model 007)

The Catheter Cover, model 007, is a catheter tube cover designed for use by individuals with incontinence, mobility disabilities, or spinal cord injury. Made from fleece with Velcro closure, it conceals the catheter tubing. SIZE: One size. COLOR: Black.

Cedar-Black Ada Picnic Table (Model 07Ey1148)

The Cedar-Black ADA Picnic Table, model 07EY1148, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. Made of recycled plastic, this long table has space for a wheelchair at each end. The table top and seats are slightly grained for a cedar wood appearance. DIMENSIONS (HxLxW): The tabletop is 31 x 97.5 x 29 inches. The seats are 20 x 72 x 9.5 inches. WEIGHT: 358 pounds. COLORS: The top and seat are cedar-colored and the frame is black. D

Celebrity X 3 Wheel

The Celebrity X 3 Wheel is a three-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with bright LED lights, a front basket, and a rear view mirror. FRAME(LxW): 46 x 24 inches with a 34-inch wheel base. The turning radius is 41.5 inches and the ground clearance is 3.5 inches. The frame has rear suspension, rear anti-tips, disassembles for transport, and features auto-latching lockup for ease of assembly and disassembly. The frame also features a

Celebrity X 4 Wheel

The Celebrity X 4 Wheel is a four-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with bright LED lights, a front basket, and a rear view mirror. FRAME(LxW): 46.75 x 24 inches with a 34.75-inch wheel base. The turning radius is 59 inches and the ground clearance is 3.5 inches. The frame has front and rear suspension, rear anti-tips, disassembles for transport, and features auto-latching lockup for ease of assembly and disassembly. The frame al

Celebrity Xl (Model Sc4450Dx)

The Celebrity XL is a four-wheeled scooter or powered wheelchair alternative designed for outdoor use by people with physical disabilities or limited mobility. FRAME (LxW): 51.24 x 25.5 inches with a turning radius of 62 inches and a ground clearance of 4.5 inches. The wrap-around heavy-duty steel frame disassembles without tools for transport and storage. The body features bumpers, rear anti-tips and covered battery and storage areas. It is available in blue or red. CONTROLS: Finger-tip control

Centurion Stainless Steel Grab Bars

Stainless steel grab bars. Diameters: 1, 1 1/4, 1 1/3 inches. 1 1/2 inch hand to wall clearance. Oval or round flanges, concealed or exposed mountings. Tested to withstand 1000 pounds of pull when properly installed. Straight: 12, 16, 18, 24, 30, 32, 36, 42, 48 inches.

Century Recumbent Whirlpool Bathing System (Model 80Xr)

Whirlpool bathing system with stretcher lift. Length 80 inches, height 35 inches, width 30 inches. Four whirlpool outlets built in. Fiberglass tank with gel coat finish, chrome plated and stainless steel components. Stretcher lift has adjustable angle backrest. Control console: bath oil and shampoo dispensers, mixing valve controls, hot water alarm and shutoff system, hand shower spray, on/off controls.

Century Tub, Saf Lift, & Saf Kary (Models 50Xr & 60Xr)

Institutional bathtubs with integral whirlpool and lift. Caster chair with removable seat. Lift picks up chair seat, swivels and lowers seat into high sided tub. Electric lift, foot pedals for attendant. Control console: bath oil and shampoo dispensers, mixing valve controls, hot water alarm and shutoff system, hand shower spray, on/off controls. Model 60XR also available with mobile bath lift.

Century's Lift Transfer System.

Patient lift with single belt lift mechanism, lifts and transfers persons in sitting position. Height 39 3/8 inches, width 21 5/8 inches, length 33 1/2 inches, weight 81 1/2 pounds. Lifting range 15 3/4 inches. Four 3 inch casters with locks. Optional model with expandable base, crank operated.

Cerebral Palsy Walker (Models 6533, 6532, & 6531)

Four legged wheeled base with 2 inch swivel casters on all legs. Rear legs also have skids to slow the movement. Forward handle bar and midline bar to prevent legs from crossing. Padded balance ring. Adult size (model 6533) height adjusts for persons 54 to 72 inches tall, base area 24 by 34 inches, balance ring height adjusts 34 to 50 inches, ring opening 12 by 15 inches. Junior size (model 6532) height adjusts for persons 48 to 58 inches tall, base area 21 by 34 inches, balance ring height adju

Chailley Cart

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a customized mobility cart for children with mobility disabilities such as spina bifida and hydrocephalus. This child is paralyzed from the waist down, and the only way she could move independently was to drag herself on her stomach across the ground. The Chailley Cart is designed as a mobility device for young children who cannot walk but have good upper body strength. The cart is made primarily of plywood. It has a winged back support and

Chair 4 Life

---- PROTOTYPE --------- PURPOSE: To create a prototype of a modular wheelchair that "grows" with the user allowing for independence over the lifespan. Through the United Kingdom's National Health Service, the Renfrew Group developed a new type of powered wheelchair with the Department of Health, as part of the Department's Innovation Health and Wealth program. Renfrew won a government contract to design a chair which maximizes the mobility and independence of children with disabilities as they

Chair Activity Bingo

Chair Activity Bingo is designed for use by individuals of all ages with limited physical mobility due to generalized weakness, neurological impairment, surgery or arthritis. These activities encourage physical activity without having to get up out of your seat. Chair Activity Bingo focuses on seated stretches and simple movements that must be completed in order to mark the game card. It includes 30 laminated 8-1/2 inches x 11 inches bingo cards, playing cards and instructions.

Chair And Ladder

CUSTOM ADAPTATION PURPOSE: To provide practice in moving from sitting to standing. A plywood stool was mounted to a plywood base. In front of the stool, also on the base, is mounted a plywood ladder with hardwood rungs. The ladder is braced with barckets attached to the ladder and the base on the side away from the user. The user grasps the rungs of the ladder to pull himself to a standing position. DIMENSIONS: The ladder is 850 millimeters (mm) high. The rungs are 70 mm apart. TITLE: Happy Sea

Chair Base Plate

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted chair base plate for a child with multiple disabilities. The child is unable to sit on a chair without support and when she is at school,. she is either in her wheelchair or in a wood chair with a lap strap. Although the lap strap holds the child securely, the child can still rock her chair back and forth with a significant risk of toppling over. The child’s occupational therapist recommended that a base plate be fitted to

Chair Brake

CUSTOM ADAPTATION PURPOSE: To enable an individual with a motor neuron disability to transfer safely to and from a wheeled office chair with the aid of a caregiver. The office chair has a swivel seat and a standard five-leg star base with casters. During transfers the seat could swivel or the chair move. To stop the chair from moving, a standard spring-loaded doorstop with a metal pin and a rubber stopper on the end was bolted to a leg on each side of the base. The caregiver can push down on th

Chair Raisers

CUSTOM ADAPTATION PURPOSE: To provide a child with multiple disabilities with access to an elevated cut-out table. The cruciform-shaped risers were made of 9-millimeter plywood and have vertical housings at each corner. The housings accommodate the full depth of the chair legs, but pine inserts were also made which can be dropped into the housing to further elevate the chair for taller children. DIMENSIONS: The vertical housings are 180 millimeters high. TITLE: Supporting Early Intervention. JO

Chair Scale (Model 6500)

Chair scale. Swingaway arms and foldup foot rest. Upholstered chair is permanently mounted to platform. Platform measures 21 by 23 inches. Large rubber wheels. Digital display in pounds and kilos, accurate to 1/ 10 pound (100gms.) 350 pound maximum weight capacity. Weighing mechanism has no moving parts and never needs recalibration.

Chair Scale (Models 475 & 4751)

The Chair Scale is designed for weighing persons in a sitting position. The chair features lift-up padded armrests for easier transfers, and a fold up footrest. Model 475 has a mechanical beam scale; Model 6475 has a digital scale with pounds/kilograms conversion, LED display, and an optional battery power for portability. CAPACITY: 350 pounds. WEIGHT: 94 pounds. COLOR: Silver and black.

Chair Topper

The Chair Topper is a car top mounted wheelchair carrier designed for use by individuals with lower extremity and mobility disabilities, spinal cord injury and others who use a manual wheelchairs. Designed as an overhead wheelchair carrier for compact cars or sedans, this carrier is made of steel, aluminum and fiberglass. It folds, lifts and stores a folding manual wheelchair using power from a vehicle's 12 volt battery. Two switches control the 30-second cycle for stowing and extracting the whe

Chair With Glides

CUSTOM ADAPTATION PURPOSE: To provide a means for an individual who has had a stroke to move under a dining table after sitting on a chair. A glide was attached to the bottom of each leg of a standard dining room chair. This enabled the chair to slide more easily on the carpet while keeping the chair stable when the user sat down on it. TITLE: Post Stroke Assistance. JOURNAL: TAD Journal. REF: Volume 25, Number 2, Winter 2005: P. 10-11. PAGES: 3 (including cover).

Chair-Check System

The Chair-Check System is a wandering patient system designed to prevent individuals with Alzheimer's Disease, cognitive disabilities, or balance disabilities from leaving a wheelchair or other chair without assistance. The system includes a portable Chair-Check II control unit and disposable SENSORMAT sensor. This unit, which can also be used for bed monitoring in a home setting, sets itself automatically when weight is detected on the SENSORMAT and provides an immediate alarm when the individ

Chairman Series Gel Power Batteries

The Chairman Series Gel Power Batteries are sealed, maintenance free wheelchair and motive power batteries. These batteries are available in 12-volt or 6-volt models that use absorbed electrolyte technology. Gas recombination eliminates corrosive, explosive gasses. The materials are non-spillable, even if the case is damaged. Due to these safety features, these batteries are not restricted for air travel. RECHARGE: These batteries are designed to give 700+ discharge/recharge cycles, and can be r

Chairmaster

Chair Master is a chair that is designed for individuals who have mobility disabilities due to generalized weakness or neurological impairments. The ChairMaster is designed to allow users to sit comfortably while exercising. It combines a low impact cycling workout with resistance training to create a versatile resistance chair. It is suitable for all ages and fitness levels. The ChairMaster is designed to: Increase strength and flexibility - with smooth, low-impact resistance cords instead

Chairmate Cup Holder/ashtray Holder (Model F70622-0000)

The Chairmate Cup/Ashtray Holder, model F70622-0000, is a wheelchair drink holder designed for use by individuals who use wheelchairs. The unit features a double-well cup holder and a removable ashtray. The deeper well has a pop-out bottom that accommodates most glasses and cups. The unit can be attached vertically or horizontally on the right or left side of any chair, metal frame-bed, or tubular frame wheelchair bar from 1/2 to 1.25 inches in diameter. DIMENSIONS (LxWxD): 7.75 x 6.25 x 1.75 in

Chairpro Underseat Alarm

The Chairpro UnderSeat Alarm is a wandering patient system and seating safety monitor designed for people with lower extremity, mobility and balance disabilities and other who use wheelchairs and have Alzheimer's disease, dementia or other cognitive disabilities. The ChairPro sounds an alarm when the user leaves the chair without assistance. Designed to fit all sling-seat wheelchairs up to 22-inches wide, this sensor alarm activates when the user rises and automatically resets once the person is

Chairries With Tray

The Chairries with Tray are positioning chairs designed for use by children with mobility and physical disabilities. Designed for play, feeding, and classroom activities, these stackable activity chairs are constructed of Baltic birch with rounded edges and corners. Features include a seat belt for secure seating and a detachable tray made of easy to clean vinyl. Six seat heights are available. DIMENSIONS (HxDxW): Size 1 is 5 x 7 x 11.75 inches. Size 2 is 7 x 7 x 11.75 inches. Size 3 is 9 x 7

Challenge Platform Wheelchair Rocker

The Challenge Platform Wheelchair Rocker is a rocking attachment for a wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This device enables individuals to experience the benefits of rocking without transferring from a wheelchair and is designed for individuals with good upper-body strength and a sense of balance. The platform base has minimal arc, requiring users to exert more force to cause rocking movement.Features include entry/exit from the platfor

Challenger 2000 (Models 2000, 2000E, 2000N, 2000Ne, 2000W, & 2000We)

The Challenger 2000 is a powered folding wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 2000 model, this wheelchair comes in narrow (N) and wide (W) versions. FRAME (HxLxW): 38 x 44 to 47 x 24, 26 or 28 inches. With extended footrests, the length is 40 inches. The folded dimensions (LxW) are 34 x 14.5 inches. The folding chrome-plated frame includes rear anti-tippers. CONTROLS: Integrated progr

Challenger Bp 5000 (Models 5000, 5000E, 5000N, 5000Ne, 5000W, & 5000We)

The Challenger BP 5000 is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 5000, the Challenger BP comes in narrow (N) and wide (W) versions. FRAME (HxLxW): 36 to 38 x 39 or 41 x 24, 26, or 28 inches. The frame length without footrests is 27 inches. The turning radius with footrests is 30 inches. The rigid polyester- coated power base frame is available in midnight blue and candy apply

Challenger Bx 6000 (Models 6000, 6000E, 6000X, & 6000Xe)

The Challenger BX 6000 is a rigid heavy-duty powered wheelchair designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 6000 model, this wheelchair also comes with an extra-wide seat (noted with an "X" in the model number). FRAME (HxLxW): 37 to 39 x 42 x 26 inches. With elevating legrests, the length is 44 inches. The length without the footrests is 30 inches. The rigid one-piece polyester-coated power base

Challenger Dn (Models 1450, 1450E, 1450N, 1450Ne, 1450W, And 1450We)

The Challenger DN is a folding powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 1450, the Challenger DN comes in narrow (N) and wide (W) versions. FRAME (HxLxW): 36 x 41 or 43 x 23, 25 or 27 inches. This chair has a black folding powder-coated frame with anti-tippers. Folded dimensions (LxW) are 30 x 15 inches. CONTROLS: Integrated Integra joystick controller. RWD: Rear-wheel drive with

Challenger Dx (Models 1500, 1500E, 1500N, 1500Ne, 1500W, And 1500We)

The Challenger DX is a powered foldable wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard model 1500, the Challenger DX comes in narrow (N) and wide (W) versions. FRAME (HxLxW): 36 x 41 x 23, 25, or 27 inches. Folded (LxW) the chair is 30 x 15 inches. The turning radius with footrests is 32 inches. A folding chrome-plated frame is standard; also available is a black powder-coated frame with blue c

Challenger Fx (Models 1700, 1700E, 1700N, 1700Ne, 1700W, 1700We, 1710, & 1720)

The Challenger FX is a folding powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard model 1700, the Challenger FX comes in narrow (N) and wide (W) versions. FRAME (HxLxW): 36 to 38 x 38 x 24, 26, or 28 inches. With extended footrests, the length is 40 inches. Folded dimensions (LxW) are 31 x 15 inches. The turning radius with footrests is 18 inches. The standard frame is a folding chrome-plat

Challenger Pediatric 1000

The Challenger Pediatric 1000 is a child's powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 34 x 41 or 44.5 x 21.5 inches. Folding chrome-plated frame with anti-tipper. Folded dimensions (LxW) are 31 x 14 inches. CONTROLS: Integrated programmable controller. RWD: Rear wheel drive with a right angle gear motor. SEAT (LxW): 14 or 18 x 14 inches. The back height is 14.75 inches. Seat belt included. UPH

Challenger Pediatric 1200

The Challenger Pediatric 1200 is a powered wheelchair designed for use by children or small adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 34 to 36 x 36 or 37 x 21 inches. Folding powder-coated frame with anti-tipper, available in sunshine yellow or jade green. Folded dimensions (LxW) are 35 x 15 inches. CONTROLS: Integrated programmable Integra joystick controller. RWD: Rear wheel drive with a direct drive motor. SEAT (LxW): 14 or 18 x

Challenger Pp (Model 5500)

The Challenger PP, model 5500, is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 34 to 35 x 43 x 25 inches. The frame length without footrests is 31 inches. The turning radius with footrests is 19.5 inches. The one-piece polyester-coated power base frame is available in midnight blue and burgundy red; the seat frame is black. Front anti-tippers are included. CONTROLS: Integrated programmable Integ

Challenger Px (Model 6500)

The Challenger PX, model 6500, is a rigid heavy- duty powered wheelchair designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 40 to 46 x 46 x 26 inches. The length without the footplate is 34 inches. The turning radius with footrests is 20.25 inches. The rigid one-piece polyester-coated power base frame includes front anti-tippers and a power shock system. The seat frame is black and the base is available in midnight

Challenger Recliner 2040 (Models 2040E, 2040Ne, & 2040We)

The Challenger Recliner, model 2040, is a powered folding wheelchair with a manual reclining back designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 2040E model, this wheelchair comes in narrow (NE) and wide (WE) versions. FRAME (HxLxW): 42 (with seat back upright) x 34 x 24, 26, or 28 inches. With extended footrests, the length is 47 inches. The folded dimensions (LxW) are 34 x 15 inches. The folding chrome-

Challenger Recliner 2540 (Models 2540E & 2540Xe)

The Challenger Recliner. model 2540, is a heavy- duty powered folding wheelchair with a manual reclining back designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 2540E model, this wheelchair also comes in a wide (XE) version. FRAME (HxLxW): 42 (with seat back upright) x 36 x 30 or 32 inches. With extended footrests (standard), the length is 49 inches. The folded dimensions (LxW) are 36 x 15 inches. The f

Challenger Wide (Models 2500, 2500E, 2500X, 2500Xe, 2500Yw, 2500Ye)

The Challenger Wide, model 2500, is a folding heavy-duty powered wheelchair for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 2500 model, this wheelchair comes with an extra-wide seat (X) and a super extra-wide seat(Y). FRAME (HxLxW): 38 x 46 x 30, 32, or 34 inches. With elevating legrests, the length is 49 inches. The folded dimensions (LxW) are 30 x 15 inches. The folding chrome-plated frame includes rear ant

Champ Dog (Model 967)

The Champ Dog, model 967, is a switch operated toy designed for use by children with severe physical disabilities, mobility, or upper extremity disabilities. When the capability switch (not included) is activated, this plush dog walks, wags its tail, sits on its hind legs and raises its paws and barks. POWER: Uses two C batteries (not included). DIMENSIONS (LxWxH): 11 x 4 x 8 inches.

Champramp

The ChampRamp is a bowling ramp designed for use by individuals with balance, mobility, or lower extremity disabilities. It can be used while seated in a wheelchair or chair, or while standing. The unit allows hands-free placement of the ball at the top of the ramp, with smooth ball release and no ramp movement, shifting, or vibrations. There is a ball guide line on top of the ramp, with a front adjustable guide and operating instructions on the ramp and in the ramp handle. The main support is

Change Table Plus

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create custom adapted change table for a child with developmental delays. The child’s parent requested a table which would cover most of the bath, but would still be easy and light enough to remove and store. The first thought was to build a table with a Melamine top mounted on folding legs, which could be removed when the bath was to be used for bathing. In the end, the simplest solution proved to work beautifully was a sheet of 9 millimeter MDF

Chango R4 Balance Board

The Chango R4 Balance Board is a combination rocker board and balance board designed for use with individuals with balance or neurological disabilities. This round wooden board balances either on a large, removable center ball or on two wooden balls attached to the bottom of the board. The rocking/wobble motion stimulates the inner ear, helping to develop balance. This device can be used to improve balance, and stengthen the ankles, legs, knees, and back. DIMENSIONS: The board is 16 inches in di

Channel Armrest Fixture (Model 436F1)

The Channel Armrest Fixture, model 436F1, is a pivoting, elevating armrest designed to be attached to the arm of a wheelchair with a fitted clamp. The swivel configuration allows the armrest to turn on its horizontal and vertical axis for more comfortable positioning. It can also be used to mount and position hand control units for powered wheelchairs.

Chart Holder (Model 93)

The Chart Holder, Model 93 is vinyl pouch sewn to the back of the wheelchair upholstery. It may be used for carrying charts and papers. OPTIONS: Identification stencilling is available.

Chattanooga Wheelchair Cushion

The Chattanooga Wheelchair Cushion is a gel flotation seat cushion designed for use with wheelchairs. The top layer is made of antibacterial treated brushed tricot and the bottom layer is made of nylon pack cloth. The cushion has a gel-like center. The cushion has a built-in carrying handle. DIMENSIONS: The cushion is 17.5 x 18.5 x 2 inches. The carrying handle is 6 x 1 inch. CAPACITY: 325 pounds. WEIGHT: 12 pounds.

Cheetah Wheelchair

The Cheetah Wheelchair is a child's manual wheelchair designed for use by children with lower extremity disabilities, mobility disabilities, neurological disabilities, or spinal cord injury. FRAME: Composite frame with transportation tie-downs and anti-tips in a choice of silver, blue, red, or green. SEAT (LxW): Solid seat and back with built-in, step-less adjustment from 10 x 10 inches to 16 x 16 inches. The reclining backrest offers 22 degrees of manual tilt. CUSHION: Black and gray seat and b

Cherry / Oak / Walnut Ada Compliant Interior Threshold

The Cherry / Oak / Walnut ADA Compliant Interior Threshold is a threshold ramp designed to provide access for wheelchair users and others with mobility, lower extremity, or walking disabilities. The ramp slopes up both sides gradually, to allow wheelchair users to roll over, and also to provide less obstruction for individuals with walking disabilities. This wooden ramp is available in cherry, oak, or walnut. DIMENSIONS (HxLxW): 0.5 x (24, 36, 48, 60, or 96) x (3.5, 4.5, or 6.5) inches.

Child Carrier

The Child Carrier is a child transport chair designed to enable a wheelchair user to carry a child on the wheelchair, to be close to the child, and keep the child occupied. The device consists of a standard child's swing seat mounted on a 3/4-inch copper plumbing pipe. A wire frame for a sun awning is mounted on the top of the frame. The unit mounts into the wheelchair arm rests. PROTOTYPE DEVELOPMENT: Designed by John Duffus for wheelchair users who have difficulty holding a child or moving abo

Child Folding Parallel Bars (Models 598W & 598S)

The Child Folding Parallel Bars feature either a wood base unit that comes with one stabilizing bar or a steel base unit that comes with two stabilizing bars to lock the parallel bars in an open position. To store the parallel bars, unlock and slide until handrails are nearly touching. DIMENSIONS: The 42 inch base requires 14 inches of floor space when not in use, but add 3 feet to length when folded. Model 598W's wood base (LxWxH) is 84 x 42 x 1.25 inches; height adjusts from 19 to 27 inches, w

Child Head Float

The Child Head Float is a float swimming aid designed for use by children with upper extremity, neurological, or physical disabilities. This device is useful for a swimmer with under-developed reflexes and minimal head and limb control. The float rests on the user's the shoulders and wraps around the neck, holding the head above water. CAPACITY: 40 to 50 pounds

Child Quad Cane (Model 100)

The Child 100 is a quad cane designed for the heighth of children. It has an adjustable straight shaft, a shovel-type handle with wooden grip, and 4 legs with rubber safety tips. An Allen wrench is included for height adjustments. DIMENSIONS: Base size is 4 x 6 inches. Height adjusts from 22 to 26 inches. WEIGHT: 1.5 pounds.

Child Standing Table (Model 314)

This standing table supports all weight bearing parts of the body while offering an adjustable work surface for various activities. The standing table is fully adjustable from the floor up. It comes complete with: a table top that adjusts to various depths; an adjustable padded knee, hip, and buttock support. The unit also offers three body thickness adjustments and two body width adjustments at the hip. Additional, Velcro ankle straps are mounted on the adjustable foot alignment rail. DIMENSION

Child Wheelchair Tray (Model 766C)

The child wheelchair tray fits all wheelchair sizes. The top is made of mar-resistant wood grain laminate and has a 1/2 inch rim. DIMENSIONS: 21 x 18 x 12.5 inches with a 7.5-inch cut out.

Child With Active Grip Handle (Model 107)

The Child with Active Grip Handle (model 107) is a quad cane designed for the heigth of children. This adjustable height, straight shaft cane has 4 legs with rubber tips, and a shovel-type handle with 30-degree tilt adjustment available. An Allen wrench is included for height and handle adjustments. DIMENSIONS: Base size is 4 x 6 inches. Height adjusts from 22 to 26 inches. WEIGHT: 1.5 pounds.

Child's Vehicle

The Child's Vehicle is a powered cart designed to be an electric toy vehicle for children with poor dexterity and motor ability. The cart is a standard electric child's vehicle with a modified joystick control and a backrest. The joystick has a plastic plate mounted on top and four plastic discs mounted on each corner. The modified joystick allows the vehicle to be controlled with simple palm and forearm movement. This battery powered vehicle has two motors, six wheels, and is chain driven. PROT

Children's Cargo Shorts With Opening Options (Model C125C)

The Children's Cargo Shorts with Opening Options, model C125C, are children's pants designed for use by individuals with mobility, neurological, or severe physical disabilities or spinal cord injury. These shorts have reinforced wrist loops for lifting and dressing. Other standard features include a wider cut and higher rise in the back, and an elasticized waistband with adjustable cord. These shorts are made from polyester/cotton fabric or 100 percent polyester micro fiber and are available wit

Children's Casual Denim Pants With Opening Options (Model C122-Denim)

The Children's Casual Denim Pants with Opening Options, model C122-Denim, are children's pants designed for wear by children with mobility, neurological, or severe physical disabilities or spinal cord injury. These pants have reinforced wrist loops for use in lifting and dressing. Other standard features include an elasticized waistband with adjustable cord, and a wider cut and higher rise in the back. The pants are made from 8-ounce 100 percent pre-washed cotton denim, with either a Velcro fly,

Children's Fleece Pants With Outside Seam Openings (Model C121-4)

The Children's Fleece Pants with Outside Seam Openings, model C121-4, are children's pants designed for use by children with mobility disabilities, severe physical disabilities, spinal cord injury, or incontinence. These pants have a higher rise in the back for wheelchair users or walkers, and a wider cut to accomodate diapers. They also have an elastic waist with an adjustable cord, reinforced wrist loops for lifting and dressing, cuffs on the hems, and thigh-level patch pockets. Outside seam o

Children's Wheelchair Style Jeans (Model C301)

The Children's Wheelchair Style Jeans, model C301, are children's jeans designed for wear by children with mobility, neurological or severe physical disabilities, or spinal cord injury. These jeans have reinforced finger loops at every opening to assist caregivers in dressing the child. Other standard features include double stitching, a high rise and elastic waist in the back, extra room in the seat, and five pockets. These jeans are made from 100 percent cotton and are available with a Velcro

Chin Switch Harness

Chin Switch Harness ------- "DO IT YOURSELF" ENTRY ------- A thermoplastic chin switch holder worn on the chest. The switch is held on to the harness with Velcro and can be easily removed.

Chirping Chick (Model 62)

The Chirping Chick, model 62, is a toy designed for use by children with mobility, upper extremity, or severe physical disabilities. This fluffy yellow chick chirps when a slight amount of pressure is applied to its head or the yellow activation pad. POWER: Uses 2 AAA batteries (not included). DIMENSIONS (HxLxW): 5.25 x 4.25 x 3.5 inches.

Chrome Fritz Cane

The Chrome Fritz Cane is a straight cane designed for use by individuals with walking or balance disabilities. This cane has a chrome-plated aluminum Fritz handle, a hardwood shaft, and a high-traction rubber tip with steel insert. A removable wrist strap is included. OPTIONS: Cane holder and combi tip with retractable ice tip. DIMENSIONS: 36 inches long (can be cut to size). COLOR: Chrome handle and accent ring and black or scorched cherry stained shaft.

Chrome Plated Flanged Grab Rail (Model 118)

The Non-Peel Flanged Grab Rail, model 117, is a grab bar designed for use by individuals with balance or mobility disabilities. This grab bar has flanged ends with mounting holes. DIMENSIONS: Available in 12, 15,18, 24, or 28 inches long with a 2.75-inch hand clearance. The rail is 1-inch in diameter. COLOR: Chrome.

Chump

The Chump is a child's manual wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. Elements of this wheelchair can be adjusted independently to accommodate the child's growth. FRAME: Contoured saddle frame design to allow compact storage in a choice of standard or mini frame; the standard frame is 3 inches longer than the mini frame. The frame is available in choice of more than 20 solid colors or with anodized clouds or cust

Church Sanctuary Wheelchair Lift

The Church Sanctuary Wheelchair Lift is an interior wheelchair lift designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. It is intended to provide discrete access to the raised sanctuary of a church. The lift has momentary (constant pressure) control switches on the platform, at the upper landing, and at the bottom landing. It features a twin-rail, chain and sprocket design. The quiet electric motor unit includes a standard battery backup. In the e

Cindy Lift

The Cindy Lift is a seat transfer lift aid designed to make lifts more manageable for caregivers and the individual being assisted and to broaden accessible areas for its user. The lightweight aluminium frame allows for quick transfers in a three-step process. This unit adjusts to the user's body and reduces the weight of its occupant for the lifter. The narrow profile fits through doors, halls, and restroom stalls. With this device, the user is able to wear street clothes instead of gowns, and

Circaid Juxtacures Compression Systems

Circaid Juxtacures Compression Systems are designed for use by individuals with Venous Insufficiency, Venous Stasis Ulcers, Post Thrombotic Syndrome, and Dependent Edema. It is an adjustable, inelastic multi-layer compression system that may be used by hospitals and clinicians as a secondary dressing for the treatment of open venous stasis ulcers. These compression systems can be tailored to fit the patient’s limb size and contour. The adjustable compression amounts are 20-30mmHg, 30-40mmHg or 4

Cirrus

Cirrus is a lightweight manual wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Carbon steel frame with double-coated chorome finish and dual axle allowing seat transition to hemi-level. SEAT: 16-, 18-, or 20-inch width. UPHOLSTERY: Flame-retardant black nylon upholstery. ARMRESTS: Flip-back arms with nylon padded armrests. Arms come in a choice of full or desk style. CASTERS: Urethane front casters with caster for

Cirrus Plus Folding Power Chair

The Cirrus Plus Folding Power Chair is a powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Folding lightweight carbon steel frame with silver vein finish and anti-tippers. CONTROLS: Programmable PG controller with adjustable-length joystick mount. SEAT: The seat is available in 16, 18, 20, or 22 inches. A Seat belt is included. The adjustable tension back is height and angle adjustable and can be folded down. The angle adjusts from 5 to 1

City Round Pedestal Wheelchair Accessible Picnic Table

The City Round Pedestal Wheelchair Accessible Picnic Table is designed for use by individuals who use wheelchairs. This round picnic table has three seats attached to the pedestal which can accommodate six adults. The table also has an opening to accommodate a wheelchair. The table top is thermoplastic coated and sits on a powder-coated steel pedestal. The table also has an umbrella hole. DIMENSIONS: Table is 30 inches high and the table top is 46 inches in diameter. The seats are (HxW) 18.25 x

City Square Picnic Table - Wheelchair Accessible (Model Pup358H-V)

The City Square Picnic Table - Wheelchair Accessible, model PUP358H-V, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This table has three attached seats with space for a wheelchair on the fourth side. It has a galvanized, powder-coated steel frame, with a high-gloss plastic coated table top and seats, and is portable/surface mounted. The table top has an umbrella hole. DIMENSIONS (HxLxW): The table top is 30 x 56 x 46 inches. The s

City Wheelchair Accessible Picnic Table - One End (Model Pup238H-V8S)

The City Wheelchair Accessible Picnic Table - One End, model PUP238H-V8S, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This long table has seats on two sides and space for a wheelchair on one end. It is made from powder-coated galvanized steel, with plastic coating on the table top and seats, and has a portable/surface mount. DIMENSIONS (HxLxW): The table top is 30.5 x 96 x 30 inches and the seats are 18.75 x 72 x 12 inches. WEIGH

City Wheelchair Accessible Picnic Table - Two End (Model Pup238H-V8)

The City Wheelchair Accessible Picnic Table - Two End, model PUP238H-V8, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This long, rectangular table has an extended table top at both ends to allow access for two wheelchairs. The portable, surface- mounted table has two benches and is made from thermoplastic-coated steel with a powder-coated galvanized steel frame. DIMENSIONS (HxLxW): The table top is 30.5 x 96 x 30 inches. THe seats

Clamp-- Positioning, Swivel Hold Down, Fixed Hold Down

These Clamps are seating hardware designed to be used in wheelchair seating systems. The Positioning Clamp has applications where clamping of the mounting hardware is fastened to the tubing of the wheelchair. It is most often used on the rear of the wheel base to position the chair initially and to keep the chair from shifting. The Swivel Clamp is a riveted one-piece design, used for securing the seat to the wheel base or wheelchair. By turning the swivel hold-down 90 degrees, complete seating d

Clamp-On Cup Holder (Model 16C035)

The Clamp-On Cup Holder, model 16C035, is a wheelchair drink holder designed for use by individuals who use wheelchairs. This device attaches to most wheelchairs. Once the attachment clip (included) is installed onto the chair, the cup holder itself can be removed as needed. There are no tools required. DIMENSIONS: Attachment clips fit 7/8 and 1 inch tubes.

Clapper Plus With Remote Control

The Clapper Plus with Remote Control is a sound activated switch and radio remote control for lights or appliances designed for use by individuals with mobility disabilities. This unit allows the user to turn one or two appliances on or off by clapping hands or by pressing a button on a remote control. The remote control operates at a distance up to 25 feet away, and can operate through walls from another room or from outside. Operable appliances include lamps, Christmas tree lights, fans, and r

Clarity D714 Amplified Cordless Phone

The Clarity D714 Amplified Cordless Phone is a large button, cordless, amplifier telephone with speakerphone and answering machine, designed for use by individuals with vision, hearing, or mobility disabilities. This telephone amplifies incoming sound up to 40 decibels or 20 times louder than a standard home phone. It offers 4 tone settings to customize the user's listening experience. The handset utilizes DECT 6.0 technology for clear, interference-free communication that minimizes background n

Class Desk With Adjustable Legs

The Class Desk with Adjustable Legs is a computer desk designed for use by individuals who use wheelchairs. Work surface heights can be altered as needs change and the work surface is available in a variety of widths. The desk features a hinged "Flip-Top" door that runs the full length of the work surface to provide access to cords and cables. The scratch-resistant work surface has a smooth, rounded front edge and a chair rail to prevent hardware from sliding off. OPTIONS: Adjustable CPU sling;

Classic

The Classic is a manual wheelchair wheel designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. The wheel is spin forged from 6061-T-6 polished billet aluminum, with mirror bright surfaces, sealed bearings, and Double walled rims. Hand rim options include quad projections and an anodized or vinyl surface. DIMENSIONS: 24 or 25 inch diameter. CAPACITY: 250 pounds. WEIGHT: 3.9 to 4.4 pounds. COLOR: Polished aluminum, gold, red, blue, purple, or black. H

Classic

The Classic is a 4-wheel scooter designed for indoor and outdoor use by individuals with lower extremity and mobility disabilities. FRAME (LxWxH): 40 x 22 x 36 inches; folded 31 x 22 x 19 inches. The seat and tiller fold for transport or storage. The Classic has an underbody ground clearance of 3.65 inches and a turning radius of 29 inches. Available colors are red, blue and silver. A detachable basket located under the seat is included. CONTROLS: Analog battery gauge and battery indicators lig

Classic Hand Control By Veigel (Model 4100Cl)

The Classic Hand Control by Veigel, model 4100CL, is a hand control designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. Designed for right-handed use, the device attaches to the steering wheel. To accelerate, the driver turns the ergonomic handle clockwise. To brake, the driver pushes the unit slightly forward. The brake can be locked while waiting in traffic. The ergonomic handle can be adjusted to accommodate individual driver needs. The unit ca

Classic Foot Flush

Foot Flush is a foot-operated toilet flushing aid designed for use by individuals with mobility, upper extremity, or neurological disabilities or arthritis. This device fits most flapper-style tank toilets and does not interfere with the operation of the standard flush handle. Once installed, the device sits on the floor and enables the toilet to be flushed simply by stepping on the unit.

Classic Hand Control Knob Grip Offset (Model 3500Kx)

The Classic Hand Control Knob Grip Offset, model 3500KX, is a driving hand control designed to allow individuals with lower extremity disabilities to operate the accelerator and brake of a motor vehicle with one hand. For comfort and added leverage when braking and accelerating, this unit comes with a standard bent brake rod that allows the control to be mounted higher in the vehicle for ease in driving.The offset handle is fully adjustable 360 degrees to provide additional knee clearance for ta

Classic Lighted Umbrella

The Classic Lighted Umbrella is an umbrella with light designed for use by individuals with mobility disabilities or low vision or seniors. This umbrella combines high-intensity light with high-intensity reflective material to provide 360-degree visibility at night from over a quarter-mile of a mile away. The umbrella is equipped with a replaceable six-volt krypton bulb in a chrome housing. The umbrella has a fiberglass shaft and polycarbonate ribs and is windproof in winds up to 40 miles per ho

Classic Rock & Bounce Pony With Sound

The Classic Rock & Bounce Pony is a rocking horse with safety seat designed for use by children with balance, neurological, or lower extremity disabilties. Designed for children nine months to three years of age, this rocking horse has a rubber bounce suspension, a removable safety saddle that enables the toy to grow with the child, a removable and washable fabric body, and easy-grip handles. The horse's ears make a crinkle sound and a neighing sound effect is activated by motion. DIMENSIONS

Classroom Positioner Chair (Models Cpc25, Cpc29, & Cpc33)

The Classroom Positioner Chair is a youth positioning chair designed for use by children with mobility or neurological disabilities. This wooden chair features independent adjustment of the height, depth, and angle of the seat back and footrrest. The contoured seat cushion can be set at up to 20 degrees anterior tilt, as well as level or at a posterior tilt. The chair comes standard with a contoured seat cushion, seat belt, back pad, lateral supports, and locking casters. OPTIONS: Foot surface w

Classroom Positioner Desk / Stander (Models Ds1 & Ds2)

The Classroom Positioner Desk/Stander is a height-adjustable classroom desk and standing table designed for use by children with mobility or neurological disabilities. This desk can be used with the Classroom Positioner Chair (see separate entry) or independently. Features include height and angle adjustability, a multi-adjustable desktop, adjustable knee block, and lateral pelvic pads for standing positions. The desk also included latches to secure it to the Classroom Positioner Chair. The desk

Clear Acryic Wheelchair Tray (Model H1202)

The Clear Acrylic Wheelchair Tray, model H1202, is a lapboard designed for use by individuals who use wheelchairs. Made of clear acrylic, this tray attaches to the wheelchair armrests, has a round torso cutout, and provides a large surface for eating, working, and other activities.

Clear Acrylic Wheelchair Tray (Model 5000)

The Clear Acrylic Wheelchair Tray, model 5000, is a lapboard designed for use with wheelchairs. The transparent acrylic is lightweight and the universal design fits all wheelchairs. The tray attaches with Velcro straps. DIMENSIONS: 23 x 19 x 1/4 inch.

Clear Acrylic Wheelchair Tray (Model 6662)

The Clear Acrylic Wheechair Tray, model 6662, is a lapboard designed for attachment to a wheelchair with Velcro straps. It is transparent, lightweight and has a universal design. DIMENSIONS (LxWxH): 23 x 19 x 1/4 inches. WEIGHT: 3 pounds.

Clear Corner Guards

The Clear Corner Guards are designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. The protectors provide wall corner protection for light impact areas. These protectors offer the least amount of design interruption by allowing wall color or pattern to show through. They come with pre-drilled holes and self-tapping screws. Clear adhesive tape is also available. Available wing angles are 90 and 135 degrees. DIMENSIONS: Wing sizes are available in 0.75,

Clear Lucite Derby Walking Cane

The Clear Lucite Derby Walking Cane is a straight cane designed for use by individuals with mobility disabilities. Available in men's and women's models, this cane is made of Lucite and features a derby-style handle for right- or left-handed use and rubber tip. DIMENSIONS: 36 inches long (can be cut to size). This cane is 7/8 inch in diameter. CAPACITY: The women's model supports 250 pounds. COLOR: Clear.

Clear Non-Glare Acrylic Overlay (Models 11D.3A & 11D.3B)

The Clear Non-Glare Acrylic Overlays are designed for wheelchair trays by Consumer Care Products (model numbers starting with 11D, see separate entries). These overlays may be used for tracing activities and protecting communication aids and other accessories. The overlay snaps in and out. DIMENSIONS: Model 11D.3A is 16 x 20 inches; model 11D.3B is 19 x 24 inches. WEIGHT: Approximately 4 pounds.

Clever Clubs (Models Ccs1 & Cctr1)

Clever Cubs are wheelchair golf clubs sized for use by individuals who use wheelchairs. All clubs feature True-Temper shafts, high-quality heads, and Sure-Tac jumbo grips. Model CCS1 is a "shorty" set for an individual user designed to be used over the side of a wheelchair. This set includes a short-shaft metalwood, three different irons, a pitching wedge, and a putter. Also included are 12 golf balls. Model CCTR1 is a therapy and rehab package and includes two ambidextrous shorty putters, two

CLEVERCATCH® Exercise

CLEVERCATCH® Exercise is an activity and answer ball designed for use by children with learning disabilities, cognitive disabilities as well as for those working on improving their eye hand coordination, visual perceptual motor skills.  It allows children to build their learning skills. Each ball features a variety of graphics, problems, facts, and questions to reinforce learning in a fun way. Students will not mind practicing math, language, history, geography, etc. while they can play ball. Ba

CLEVERCATCH® Math

CLEVERCATCH® Math is an activity and answer ball designed for use by children with learning disabilities, cognitive disabilities as well as for those working on improving their eye hand coordination, visual perceptual motor skills.  It allows children to build their learning skills. Each ball features a variety of graphics, problems, facts, and questions to reinforce learning in a fun way. Students will not mind practicing math, language, history, geography, etc. while they can play ball. Basic

CLEVERCATCH® Multiplication

CLEVERCATCH® Multiplication is an activity and answer ball designed for use by children with learning disabilities, cognitive disabilities as well as for those working on improving their eye hand coordination, visual perceptual motor skills.  It allows children to build their learning skills. Each ball features a variety of graphics, problems, facts, and questions to reinforce learning in a fun way. Students will not mind practicing math, language, history, geography, etc. while they can play ba

CLEVERCATCH® World Geography

CLEVERCATCH® World Geography is an activity and answer ball designed for use by children with learning disabilities, cognitive disabilities as well as for those working on improving their eye hand coordination, visual perceptual motor skills.  It allows children to build their learning skills. Each ball features a variety of graphics, problems, facts, and questions to reinforce learning in a fun way. Students will not mind practicing math, language, history, geography, etc. while they can play b

Clinare Bath

Portable, freestanding water hydraulic bath lift. Tilts to an upright position for entry and reclines to a natural bathing position once user is seated in unit. Contoured and cutaway shape facilitates water circulation in the perineal area. Operated by single lever control.

Clinic Model Wide Base (Model 6827)

Wide based adjustable height four legged cane with straight shaft shovel type handle. Rubber safety tips. Base is 9 by 12 inches. Height adjustment is a double locking clamp. Adjustable height from 30 to 39 inches.

Clip On Ashtray (Model 16C034)

The Clip-On Ashtray, model 16C034, is a clip-on ashtray designed for use by individuals who use wheelchairs. A secure mounting system attaches the ashtray to the wheelchair. Two clips snap over the wheelchair tubing and for additional security, a rubber ring snaps over the ends of the clips to lock the unit in place to eliminate spilled ashes.

Clip Stroller / Pushchair Size 1

The Clip Stroller / Pushchair 1 is a lightweight folding stroller designed for children with mild to moderated neurological and mobility disabilities. It is designed to provide head and trunk support. The size 1 Clip special needs stroller will support up to 66 lbs (30 kg). The Clip comes standard with a reclining backrest that is adjustable by zippers located behind the backrest. The backrest will adjust from 0 to 12 degrees from the upright position. A height adjustable footboard is also inclu

Clip-On Ashtray With Remote Tube (Model 562187)

The Clip-On Ashtray with Remote Tube, model 562187, is a clip on ashtray and remote smoking device designed for use by smokers who use wheelchairs and have upper extremity disabilities. The cigarette is placed in one end of the tube, which holds it over the ashtray, and the smoker uses the mouthpiece of the tube to smoke. The ashtray has two clips which snap onto wheelchair. Security rubber rings snap over the ends of clips to lock the unit in place. DIMENSIONS: Tube is 36 inches long.

Clip-On Glass Holder (Model F74576)

The Clip-on Glass Holder, model F74576, is a drink holder designed to be attached to a wheelchair frame, commode, or other tubular frame haveing a diameter of 0.75 to 1 inch. This helical spring-wound wire holder has a baked-on enamel finish and a plated clip. DIMENSIONS: 2 7/8 inch inside diameter x 3 inches high.

Closed Chain Disk

Closed Chain Disk is designed for use during aqua therapy for leg and hip muscle toning. It also works on improving balance, increases range of motion in the lower extremities, strengthens the upper body and improves trunk stability. COLOR: White. WARRANTY/GUARANTEE: As stated by the manufacturer.

Closed Handgrip Cushion (Type 16)

Rubber cushion for crutch handgrip. For crutches with removable handgrip. Wooden handgrip must be removed to slip rubber handgrip over it.

Closed Seat Sling

The Closed Seat Swing is a transfer lift sling designed for use with individuals with lower extremity amputations and others requiring a closed seat. Available in polyester or nylon webbing, this sling attaches to a lifting bar with four adjustable braided nylon straps.

Closed Type 160

Rubber cushion for crutch handgrip. For crutches with removable handgrip. Wooden handgrip must be removed to slip rubber handgrip over it.

Closet Adaptations

DO IT YOURSELF ENTRYPURPOSE: To make an existing closet accessible to seniors and individuals with arthritis, balance disabilities, or mobility disabilities. This illustrated article, included in a chapter entitled "Bedroom & Getting Dressed," discusses various inexpensive modifications. Included are lowering the clothes rod, adding shelves at usable heights, storing items on the floor in baskets, and replacing the closet door with a curtain or lighter weight folding door. AUTHOR: Greenstein

Cloth Lap Tray.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Overcomes the difficulty of a person in a wheelchair to balance objects on the lap. Cloth tray with stiffened edges can be constructed to provide a flat surface on which to place articles. Stiffened edge serves to prevent things from slipping off the tray. Made of 1 and 1/8 yards of fabric or 1/2 yard each of two contrasting fabrics, velcro, and 1 and 1/8 yard rubber tubing or garden hose. COMMENTS: Simple pattern and instructions for construction are

Cloud Cushion, The

The Cloud Cushion is a foam wheelchair cushion designed for use by individuals at risk for pressure sores or ulcers. The Cloud Cushion offers protection and stability in a lightweight, low-profile design. It produces acceptable levels of pressure distribution, eliminating the risk of bottoming out and the potential for failures due to punctures or leaks. The cushion corrects to automatically adjust to the dynamic conditions that occur within the seating environment. The Lycra Cel-Pak is install

Cloud Matchmaker

Cloud Matchmaker is a shape making and matching game designed for children and adults. It consists of 24 wooden shape tiles, 24 matching cardboard cards, a card stand and a plastic chain-link. Players choose one of the cardboard shape cards and place it in the stand for only them to see. They then arrange and manipulate the chain to resemble the shape they have chosen. Other players try to identify the shape being made by matching it to the correct shapes on one of the wooden tiles. This game in

Cloud Nine by ROMPA

Cloud Nine by ROMPA® - Cloud Nine Frame, Mat and Cushion - complete set is designed for use by children with sensory processing disorder, cognitive and emotional disabilities.  It creates a fun, inviting safe enclosure with a range of accessories to suit different users and different requirements.  The environment is versatile and adaptable.  Cloud Nine Frame, Mat and Cushion are made out of fire resistant material and are easy to clean.

Coccyx Cushions (Models N1001 & N1002)

The Cocccyx Cushions are foam seat cushions designed for use in wheelchairs. These cushions have a firm foam base, a coccyx cutout, and a removable zippered cover. DIMENSIONS: Model N1001 is 3 x 16 x 16 inches and model N1002 is 3 x 16 x 18 inches. COLOR: The cover is navy.

Coccyx Gel Cushion

The Coccyx Gel Cushion is a foam wheelchair cushion designed for use by individuals with lower extremity and mobility disabilities and spinal cord injury. Designed to relieve pressure to the spine for wheelchair users, this cushion is made of a high density foam and gel combination for added strength and durability. It features a square shaped cutout for the coccyx to aid in proper weight distribution. DIMENSIONS (LxWxH: 18 x 16 x 3.5 inches. COLOR: Blue.

Collapsible Dam (Models Cwr-42, Cwr-54, Cwr-66 & Cwr-96)

The Collapsible Dam, models CWR-42, CWR-54, CWR-66 and CWR-96, is a water dam for a shower designed to control water spillage from all types of barrier-free, curbless showers. This device collapses easily by foot or wheelchair pressure and features a strong self-adhesive, water-resistant tape bottom. SIZES: 42 inches (for 36-inch opening); 54 inches (for 48-inch opening); 66 inches (for 60-inch opening); 96 inches (for 90-inch opening). OPTIONS: End caps for showers with radius end walls are ava

Collapsible Lap Tray.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Wheelchair lapboard folds and stores on back of chair. Lightweight lapboard attaches to full length wheelchair arms. It folds in half and can be used as a short lapboard, or removes and stored easily on the back of the wheelchair. Includes picture. SKILLS REQUIRED: Woodworking AUTHOR: Bob Warren, UCP of Akron, 318 Water STreet, Akron, OH 330-376-6041. TITLE: Tools, Equipment and Machinery Adapted for the Vocational Education and Employment of Handicapp

Collar & Bridge Assembly (Model 32669)

The Collar & Bridge Assembly, model 32669, is a control switch accessory for mounting hardware designed to secure wheelchair controllers to the chair. The Collar allows a full range of motion while holding controllers such as joysticks and sip-n-puff goosenecks in a stationary position relative to the user. The Bridge Assembly includes plastic spacers to position the control unit at a proper distance from the collar. Pre-drilled holes on the front of the collar enable a variety of height adj

Collins Allowable Alternate Vehicle - Wheelchair Accessible (Model Cdh12+2)

The Collins Allowable Alternate Vehicle (AAV) - Wheelchair Accessible, model CDH12+2, is a public transport van designed for use by passengers who use wheelchairs. Built on a Chevrolet chassis, the van can carry 12 adult passengers, including two in wheelchairs, and has a four-speed automatic transmission, dual rear wheels, and a six-liter gas tank. It comes with a Braun or Ricon wheelchair lift and either school bus certified or activity seats. DIMENSIONS (HxLxW): 114 x 260 x 95 inches. The wh

Coloured Jeans

Coloured Jeans are men's and women's jeans designed for adults who use wheelchairs. Made of extra strong denim with double and triple sewn seams, these pants have up to three extra zipper pockets on each leg, and each pair has an extra long, heavy-duty zipper at the front for wider opening. The jeans have belt loops and pull loops that extend from the top of the waistline to aid in putting on the pants. All of the studs are lined with a soft material to prevent pressure sores. OPTIONS: Closed o

Colson 0315 Seven Spoke Plastic Wheel

The 0315 Seven Spoke Plastic Wheel is a castor wheel designed for attendant operated wheelchairs. The caster wheel is made of high impact engineering thermoplastic to be virtually corrosion and oxidization free, and easy to clean. The rim section is designed to accept both pneumatic rubber and microcellular polyurethane (MCP) tires. The polyurethane tires have shallow tread patterns so that less debris is tracked indoors. WHEEL DIAMETER: 315mm (12.5 inches). TREAD WIDTH: 45mm (1.75 inches) or 57

Columbia Toilet Support (Models 4700 & 4800)

The Columbia Toilet Support, models 4700 and 4800, is a high-backed toilet support designed to provide head and trunk support for children and adults with balance disabilities. The unit has a full-length, height adjustable, high-impact ABS plastic back and a harness with a safety buckle. The support bolts directly to the toilet and the children's model, model 4700, includes a seat reducer ring. Model 4800, the adult model, sits 4 inches further back on the toilet seat than model 4700. OPTIONS: A

Columbia Wrap-Around Bath Support (Models 7200, 7300, & 7700)

The Columbia Bath Support is a child bath seat designed to hold a child in a normal sitting position to provide trunk stabilization and to free the hands of the individual helping to bathe the child. It may also be used in other seating applications and in supervised wading pools. The support has a secure, contoured trunk yoke. The chair frame rests on the bottom of the tub and has a soft coating to protect the tub's finish. The seat features a rustproof frame, a rip-proof mesh seat, and stainle

Combi-Walker

The COMBI-Walker is a nonfolding wheeled walker with a seat designed for use by individuals with mobility disabilities. This unit consists of a PVC resin tubing frame with a mesh seat and back. With small front ball-style casters and small fixed rear wheels, the unit can be used as a walker or ambulator. With the detachable rear wheelchair-style wheels in place, the unit enables the user to sit and propel themselves. A seatbelt is standard.

Combination Aid Rail (Model 1632)

The Combination Aid Rail ##1632 is a stainless steel wall mounted grab bar for use in bathtubs or showers. The support consists of an L-shaped bar that mounts in two places on the vertical side, and one on the horizontal side. The grab bar is available in exposed mounting styles and 4 concealed mounting styles. The rail comes in right or left hand configurations. DIMENSIONS: 16 x 32 inches with 1, 1.25, or 1.5 inch diameter tubing. Safety wall clearance is 1.5 inches. FINISH: Brushed Satin is st

Combination Dressing Stick And Shoehorn

The Combination Dressing Stick and Shoehorn is a long-handled and shoehorn and dressing stick designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of hard, durable plastic, this device features a large angled hook that holds and pulls clothing, and a long, notched shoehorn at the opposite end for removing socks. This aid also features a push/pull pointer for opening and closing drawers and doors, turning on and off light switches, and retrievi

Combo Walker / Wheelchair Bag (Model 6434)

The Combo Walker/Wheelchair Bag is a carrying bag or caddy for use by people who use wakers or wheelchairs. The denim bag features four pockets ataches to the front walker bar or wheelchair arm using the attached straps. DIMENSIONS: 13 x 9.5 inches. COLOR: Blue.

Comet

Comet is a three-wheeled scooter designed for use by individuals with mobility disabilities. FRAME (LxW): 250 x 130 millimeters. The scooter disassembles into four components for transport, and its front bumper serves as a carrying handle. This scooter is available in red or blue. CONTROLS: Dynamic Rhino 70 Amp speed control. BRAKES: Fully-automatic magnetic disc safety brake. WHEELS: The front tire is 200 millimeters in diameter x 50 millimeters wide and the two rear tires are 200 millimeters i

Comet Series 300

The Comet 300 Series are transport wheelchairs designed to transport individuals with mobility or cognitive disabilities who are unable to maneuver a wheelchair independently. FRAME: Steel folding frame in blue, red, or silver, depending on model. SEAT: The seat width is available in 17 inches (models 301, 317, 327), 17.5 inches (model 338), 18 inches (model 339), and 19 inches (models 309, 319, 329, 339). The seat depth is 16 inches. The distance from the seat to floor is 18 inches (model 330),

Comfort + Plus Clinical Recliner (Models 6902 & 6903)

Recliner chair with high back and full length armrests. Reclines to 3 positions. Legrest elevates as chair reclines. Four 5 inch casters. Self storing overlap table tray swings down to side. Upholstery is vinyl bonded to foam, flame and stain resistant seams. Push bar on back. Overall width 27 inches, overall depth 37 inches, overall height 45 1/2 inches, seat width 20 inches.

Comfort Bather Bath Lift (Model Mau-200140)

The Comfort Bather Bath Lift, model MAU-200140, is a bath lift designed for use by individuals with balance, mobility, or lower extremity disabilities. This motorized portable bath lift features an inflatable seat and back support, air pump, and a waterproof floating hand control. The user can raise and lower the lift using the hand control, and the unit is lowered to the bottom of the tub for bathing and raised to the top of the tub for exiting. A safety feature prevents lowering of the lift un

Comfort Carrier Evacuation System

The Comfort Carrier Evacuation System is an emergency evacuation system designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. Designed for use in multistory buildings, the package includes an ADA-compliant steel cabinet with an alarm and a clearly illustrated acrylic window, which is placed on the wall near a fire exit; a Comfort Carrier Evacuation Sling (see separate entry), which fits inside the cabinet; illustrated usage instructions; an overhead

Comfort Carrier Transfer Sling

The Comfort Carrier Transfer Sling is a manual transfer sling designed for use by wheelchair users with spinal cord injury, neurological disabilities, stroke, cerebral palsy, or brain injury. This sling enables wheelchair users to transfer with assistance from two helpers. The sling is slipped around the seated user, then is crisscrossed under the thighs and its buckle is fastened. Two assistants (in front and back or on each side) lift and transfer. The foldable sling is lightweight and machine

Comfort Crutches

Forearm crutches with Performance crutch tips, black or gray vinyl handgrips, nylon pivot block for cuffs. Front or side opening cuffs with gray or black vinyl coating or stainless steel. Cuff post fabricated from anodized aluminum tubing. Custom made to users length which amkes them rattle free and wear longer.

Comfort Lift Chair (Model 300)

Adjustable seat lift recliner. Adjustable lift angles, from 30 to 180 degrees or flat position in 5 increments. Full recline with 1 1/2 inch placement from wall. Complete chair rises via gear driven motor. Welded steel tube lift mechanism is plated. Uses motor-driven linear actuator with clutch and thermal protection. 110 Volt, 2.4 Amp, standard household current. 100% Dupont nylon fabric with 3M Scotch Guard Protection, foam filled. Solid hardwood frame. Control may be hand held or mounted on r

Comfort Pad For Economy Molded Lap Tray (Model A707-151)

The Comfort Pad for Economy Molded Lap Tray, model 707-151, is a lapboard overlay designed for use with the Economy Molded Lap Tray (see entry). This pad fits securely within the lip of the tray and is secured with the tray's D-ring straps. The pad has an integral cup/glass recess. OPTIONS: The pad and tray can be purchased separately or as a unit. DIMENSIONS: The pad is 0.5-inch thick.

Comfort Pads

The Comfort Pads are walker handgrip pads made of foam. These pads attach with Velcro and have a washable terry cloth cover. DIMENSIONS: 6 x 8 inches.

Comfort Plus Wheelchair Liner (Model Vlm6630)

The Comfort Plus Wheelchair Liner, model VLM6630, is a decubitus pad designed for use by individuals with mobility disabilities or spinal cord injury who are at risk for pressure sores/ulcers. The pad covers the wheelchair seat, sides and arms, and back, and is made of lightweight, latex-free fiber material that resists matting and allows air circulation. It has an incontinence cover on one side and is machine washable. COLOR: White.

Comfort Plus Wheelchair Seat Pad (Model Vlm6610)

The Comfort Plus Seat Pad, model VLM6610, is a decubitus pad designed for use by individuals with mobility disabilities, severe physical disabilities, or spinal cord injury who are at risk for pressure sores/ulcers. This latex-free wheelchair seat pad is made of a lightweight material that resists matting and allows air circulation. The pad has an incontinence cover on one side and is machine washable.

Comfort Plus, Comfort Plus Ii (Model 6960)

Seat lift recliner chair. Fully powered back; removable back for cleaning, portability; choice of upholstery; back reclines within 8 inches from wall; contoured back; arms elevate with seat; armrest covers; 5.5 inch thick seat made of multiply layered foam; ottoman extends prior to back reclining to allow elevation of legs while sitting upright; storage pouch; side mounted switch for powered recline and lift. Overall height 41 inches, overall width 30 inches, seat width 20 inches, seat depth 21

Comfort Standing Power Wheelchair (Models Ly-Esb22Sr, Ly-Esb22Dr, Ly-Esb22Ar, & Ly-Esb22Lr)

The Comfort Standing Power Wheelchair, models LY-ESB22SR, LY-ESB22DR, LY-ESB22AR and LY-ESB22LR, is a powered stand up wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME: Available in four sizes (HxLxW): 35 x 46.5 x 24.5 inches (small, LY-ESB22SR); 35.75 x 46.5 x 26 inches ((medium, LY-ESB22DR); 37.5 x 47.5 x 27.5 inches (large, LY-ESB22AR); or 39 x 47.5 x 29 inches ( extra large, LY-ESB22LR). The unit has a rigid steel framework

Comfort Standing Wheelchair Plus Power Lift Chair (Models Ly-Esb12Sr, Ly-Esb12Dr, Ly-Esb12Ar, & Ly-Esb12Lr)

The Comfort Standing Wheelchair plus Power Lift Chair, models LY-ESB12SR, LY-ESB12DR, LY-ESB12AR, and LY-ESB12LR, is a manual wheelchair with an integrated powered standing aid designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This is a manual wheelchair with an electric powered lift mechanism that helps the user to stand up. It is available in four sizes for individuals 4 feet 8 inches to 6 feet 3 inches in height. The lift actuator is a 12/24

Comfortarm Armrest

The ComfortArm Armrest is an arm trough designed for use by individuals with spinal cord injury, neurological disabilities, and other mobility disabilities and upper extremity disabilities. Appropriate for individuals with elbow contractures, this unit features a deep arm well, full articulation, and solid mounting. Available for the right or left arm in standard or elevating models, the standard unit allows the arm trough to be elevated and articulated with a quick release lever, while the swin

Comfortline Series

The Comfortline Series are lapboards designed for attaching to wheelchairs. The trays have a rectangular work surface and rounded torso cutout and are fabricated of wood and covered with foam padding and finished with molded satin vinyl. These trays are available in two models: the tray alone or the tray with straps. SIZE: Both models are available in child and adult sizes. DIMENSIONS (WxD): Child-size trays are 20.5 x 18 inches with a 12 x 6 inches torso cutout; adult-size trays are 23.5 x 22 i

Comfortpan

The Comfortpan is a bariatric bed pan designed for use by individuals with mobility or severe physical disabilities. Made of soft, flexible polymeric material, this high-strength bedpan holds two quarts of fluid, approximately twice the volume of a standard metal bedpan. The seat area is flexible and conforms to the shape of the body. The low rim at the back of the seat is only one half of an inch high allowing body positioning without having to arch the back. DIMENSIONS (HxLxW): 3 x 15 x 14.25.

Comfy Polyester Seatless Pants

Comfy Polyester Seatless Pants are slacks designed to be worn by women who use wheelchairs. Made of polyester, these pants feature a Velcro strip at the back of the waistband and a seat that can be fastened and unfastened to accommodate toileting needs and seated dressing. SIZES: Small, medium, large, extra large, and extra extra large. COLOR: Black, royal, purple, or assorted colors.

Comfylap

The Comfylap is a bookholder, bed tray, and laptop computer table designed for use by individuals with mobility, neurological, or upper extremity disabilities. This lightweight, rectangular table is supported two legs, each of which has two locking joints in addition to the locking joint that connects the table to the leg. Each joint has an angle lock button. All of the joints can be adjusted so that the table can be used at a variety of heights and angles to provide a surface to serve as a lapt

Commander Automatic Door Opener

The Commander Automatic Door Opener is a powered door opener and closer designed for use by individuals with physical disabilities and wheelchair users. This unit can be used in residential or commercial settings to convert new or existing swinging doors to automatic operation without modifying existing door frames. It works with both in-swing and out-swing door configurations. It can also be used on wheelchair lifts and elevators. The opening speed and hold open time are both adjustable. A cons

Commander Tricycle

The Commander Tricycle is a powered three wheel cycle designed for use by individuals with arthritis, mobility disabilities, or neurological disabilities. This cycle has three large spoked wheels, a saddle-style seat, upright handlebars, twist grip speed controller, and a rear basket. POWER: Uses an under-basket utility battery for a range of 15 miles or an in-basket industrial battery for a range of 40 miles. A 6 amp automatic charger is included. A Bosch Executive 200 Drive unit is standard.

Commercial Ada Concrete Table (Model Sw6012)

The Commercial ADA Concrete Table, model SW6012, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This round table has seats on three sides with space for a wheelchair on the fourth side. There is an umbrella hole in the center. The table is made of steel-reinforced precast concrete with a smooth polish finish and Natura Stone seats and frames. DIMENSIONS (HxD): The table is 31 x 66 inches in diameter. The table top is 38 inches in di

Commercial Double Bowl Kitchen Sink (Model 22129)

The Commercial Double Bowl Kitchen Sink, model 22129, is an accessible sink designed for use by individuals who use wheelchairs. Each bowl has a recessed drain opening located at the rear to allow more space underneath for a wheelchair user. Made of stainless steel with a polished satin finish, the sink has four fixture mounting holes and an undercoating that deadens sound and inhibits condensation. Mounting hardware is included. DIMENSIONS (HxDxW): Each bowl is 5.5 x 16 x 14 inches; overall cou

Commercial Gentleman Public Access Door Operator

The Commercial Gentleman Public Access Door Operator is a powered door operator kit designed for use in public settings to provide barrier free access for people with mobility issues. The operator allows manual use of the door by those not requiring the automatic opener. This operator can be totally pneumatic in operation or interfaced with low voltage (wired or wireless) electronics for total public access. Standard Kit Includes - Commercial Opener & mounting hardware, 4 1/2" square poly bo

Commercial Single Bowl Kitchen Sink (Models 22130 & 22131)

The Commercial Single Bowl Kitchen Sink is an accessible sink designed for use by individuals who use wheelchairs. The bowl has a recessed drain opening located at the left rear (model 22130) or right rear (model 22131) to allow more space underneath for a wheelchair user. Made of stainless steel with a polished satin finish, the sink has four fixture mounting holes and an undercoating that deadens sound and inhibits condensation. Mounting hardware is included. DIMENSIONS (HxDxW): Bowl is 5.5 x

Commode Footstool

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a customized commode chair for a youth with cerebral palsy and developmental delay to use the bathroom. Since this individual is 14 years old, his parents did not want to purchase a commode chair only to replace it in a few years when he grows taller. The most suitable commode was too big as his legs would not reach the footplate. The child’s therapist requested a waterproof platform that would sit on the footplate and provide a stable rest

Compact Activity Center & Side-Lyer Activity Center (Models 2300 & 2310)

The Compact Activity Center and the Side-Lyer Activity Center, models 2300 and 2310, is a play tray and sensory busy box designed for use by children with mobility, neurological, or severe physical disabilities. This small-scale activity center provides sensory stimulation and cognitive activity. Features include a bead curtain, a dome with brightly-colored sequins which spin when the button is pressed, a textured plate which vibrates and lights up when pressed, and a pullball that turns on a mu

Compact Featherlight 757 (Model 757, 757E, 757N, 757Ne, 757W, & 757We)

The Compactor Featherlight 757 is a lightweight folding adult manual wheelchair for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 757 model, this wheelchair comes in narrow (models 757N and 757NE) and wide (models 757W and 757WE) versions. FRAME (HxLxW): 34 to 37 x 43 or 45 x 23, 25, or 27 inches. The folded dimensions (LxW) are 31 x 11 inches. The dual axle position, multi-angle caster stem and adjustable heigh

Compact Hand Control By Veigel (Model 4200Cp)

The Compact Hand Control by Veigel, model 4200CP, is a hand control designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. To accelerate, the driver pulls the ergonomically-shaped handle backwards and a slight push forward operates the brake. The brake can be locked at the push of a button while waiting in traffic. The movements are transferred by sturdy push rods. The special transmission gives increased sensitivity at low revolutions per minute (RP

Compact Pediatric 997

The Compact Pediatric 997 is a child's manual wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury as well as amputees. FRAME (HxLxW): 31 to 34 x 35 or 36.5 x 20, 22, or 24 inches. Lightweight folding chrome-plated frame with composite side panel. Folded dimensions (LxW) are 26 x 11 inches. Anti-tippers and an anti-folding device are optional. SEAT (LxW): 14 x 12, 14, or 16 inches. The back height is 14 to 16 inches. UPHOLSTER

Compact Super Hemi 797 (Model 797, 797E, 797C, 797Ce, 797N, 797Ne, 797W, & 797We)

The Compactor Super Hemi 797 is a lightweight folding manual wheelchair for use by children and adults with lower extremity, mobility, or neurological disabilities or spinal cord injury as well as amputees. In addition to the standard adult 797 model, this wheelchair comes in children’s (models 797C and 797CE), narrow adult (models 797N and 797NE) and wide adult (models 797W and 797WE) versions. FRAME (HxLxW): 31 to 34 x 39 or 41 x 21, 23, 25, or 27 inches. The dual axle position, multi-angle ca

Compact Transporter 600 (Model 600, 600E, 600W, & 600We)

The Compactor Transporter 600 is a lightweight, attendant-driven transport wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 28.5 x 37 or 39 x 20 or 22 inches. The chrome plated frame folds; the folded dimensions (LxW) are 23.5 x 10 inches. Anti-tippers and an anti-folding device are optional. SEAT (LxWxH): 16 x 17 or 19 x 19 inches. A folding 16.75-inch high back is standard. A seatbelt is optional. UPHOLSTER

Compact Transporter 700 (Model 700, 700E, 700W, & 700We)

The Compact Transporter 700 is a lightweight, attendant-driven transport wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 28.5 x 37 or 39 x 20.75 inches. The chrome plated frame folds; the folded dimensions (LxW) are 23.5 x 10 inches. Anti-tippers and an anti-folding device are optional. SEAT (LxWxH): 16 x 17 or 19 x 19 inches. A folding 16.75-inch high back is standard. A seatbelt is optional. UPHOLSTERY: Bl

Compact Ultralight 777 (Model 777, 777E, 777N, 777Ne, 777W, 777We)

The Compactor Ultralight 777 is a lightweight folding manual wheelchair for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 777 model, this wheelchair comes in narrow (models 777N and 777NE) and wide (models 777W and 777WE) versions. FRAME (HxLxW): 34 to 37 x 44 or 46 x 23, 25 or 27 inches. The folded dimensions (LxW) are 32 x 12 inches. The dual axle position, multi-angle caster stem and adjustable height front caster

Companion 3-Wheel Scooter (Model Gc-221)

The Companion 3-Wheel Scooter, model GC-221, is a compact scooter designed for indoor and outdoor use by individuals with mobility disabilities. Standard features include a front basket, headlight, and tail light. The floor board is partially carpeted. FRAME(LxW): 41 x 23 inches. The turning radius is 30 inches and ground clearance is 3.5 inches. The scooter disassembles for transport. Color choices are vermillion red, Arctic blue, or Sahara. CONTROLS: 70-amp programmable, electronic speed contr

Companion Ii 3-Wheel Scooter (Model Gc-321)

The Companion 3-Wheel Scooter, model GC-321, is a compact, 3-wheeled scooter designed for use indoors and outdoors by individuals with mobility disabilities. The scooter comes standard with a front basket, headlight, and tail light. FRAME(LxW): 45.5 x 23.63 inches. The turning radius is 33 inches. Ground clearance is 4 inches. This scooter disassembles for transport and has a carpeted floor mat and expanded foot and leg room. The body is available in vermillion red, Arctic blue, or Sahara. CONTR

Companion Ii 4-Wheel Scooter (Model Gc-421)

The Companion 4-Wheel Scooter, model GC-421, is a compact, 4-wheeled scooter designed for use indoors and outdoors by individuals with mobility disabilities. The scooter comes standard with a front basket, headlight, tail light. FRAME(LxW): 49.5 x 23.75 inches. The turning radius is 58.5 inches and the ground clearance is 4 inches. This scooter disassembles for transport and has a carpeted floor mat and expanded foot and leg room. The body is available in vermillion red, Arctic blue, or Sahara.

Companion Remote Control (Model Hc1800C)

The Companion Remote Control unit, model HC1800C, is a remote environmental control unit designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. Using infrared and radio frequency technology, the unit can control many appliances in the home or workplace, including alarms, intercoms, door locks, door openers, window openers, lifts, telephones with loudspeakers, nurse call, pager, communication aids and computers, power sockets, lights, curtain openers,

Companion Shopper (Model 5500)

The Companion Shopper, model 5500, is a manual wheelchair designed for use by individuals with lower extremity, mobility, or physical disabilities or spinal cord injury. This chair features a swing-away shopping basket and is designed for use in commercial and retail environments. FRAME: Carbon steel, chrome-plated frame with rear anti-tips. UPHOLSTERY: Flame retardant upholstery that is mildew and bacteria resistant with heavy-duty inner liners to prevent stretching. WHEELS: Rear wheels with pe

Compass Spt Wheelchair

The Compass SPT Wheelchair is an adult tilt-in-space wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. The chair is configured for front wheel manual propulsion and can be re-configured to rear wheel propulsion without any additional parts. FRAME (LxW): 35.5 to 39.5 x 22.5 to 30.5 inches. The tilt frame offers tilt in space of 0 to 45 degrees. SEAT (LxW): 15 to 22 x 14 to 22 inches. The seat to floor height is 13.5 to

Compax (Models Cm16 & Cm18)

Compax is a lightweight travel wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. It folds and fits into the trunk of a car or on a plane, train, or bus. FRAME: The folding frame is 36.5 x 46 x 21 inches on model CM16 and 36.25 x 46 x 23.5 inches on model CM18. SEAT: 14 x 15.25 (model CM16) or 14.75 x 16.75 inches (model CM18). The back height is 15 inches on model CM16 or 16 inches on model CM18. A bucket seat and seat

Complete Hip Kit (Model A665-320)

The Complete Hip Kit is designed for use by individuals who have had a hip replacement or who have mobility disabilities. The kit includes a Savanah Toilet Seat (see also separate entry), a long-handled sponge for bathing, a dressing stick, a long-handled shoe horn, a Sock Notch sock aid to assist in putting on socks without bending, and a standard-size Handi-Reacher (see separate entry). DIMENSIONS: The Savanah Toilet Seat is 4 inches tall,

Complete Feet

Complete Feet is a foot support designed for use by individuals who use wheelchairs. This foam-padded unit covers the footplates, extends to the calf, and attaches to the chair with heavy-duty straps to help protect and control flaccid feet. The contoured leg troughs have foam in two densities to protect the ankles, reduce abrasions, and allign the legs. Rear cutouts reduce skin breakdown on the heels. DIMENSIONS (HxW): Available for 12 x 16,18,20, and 8 x 16,18,20 inch wheelchairs.

Complete Feet Single Foot

The Complete Feet Single Foot is a foot support designed for use by individuals who use wheelchairs. This foam-padded unit covers the footplates, extends to the calf, and clamps to the footplate to help protect and control a flaccid foot. The other foot remains free for foot propulsion of the wheelchair. The contoured leg trough has foam in two densities to protect the ankle, reduce abrasions, and align the leg. A rear cutout reduces skin breakdown on the heel. DIMENSIONS (HxLxW): 8-10 x 10 x 7.

Complete Platform Guide-Line Crutches (Models 676066 & 676076)

Aluminum auxillary crutch with Naugahyde padded platform attachment for forearm weightbearing. Platform attaches with screws and wing nuts and is completely adjustable from axilla to forearm height. Angle of platform tilt adjusts 20 degrees up or down from horizontal. Vertical handgrip adjusts for extension and rotation. Velcro closure over forearm. Tall adult 46 to 60 inches high, adult (model 676066) 45 to 55 inches high, youth (model 676076) 38 to 46 inches high.

Composite Caster

The Composite Caster is a caster wheel designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This lightweight composite unit has a smooth finish that promotes easier turning, reduces rolling resistance, and has no tread to collect dirt . DIMENSIONS (Diameter x Width): 4 x 1.25 inches; 5 x 1 or 1.5 inches; 6 x 1 or 1.5 inches; 8 x 1 inches.

Composite Three -In-One Commode

The Composite Three-In-One Commode is a height-adjustable commode designed for use by individuals with severe physical disabilities. Ergonomically-shaped for comfort, the commode features the Exact Level system for height adjustment. The commode can be converted from a bedside commode to a safety frame or a raised toilet seat. The pail, lid and splash guard are included. The pail capacity is nine quarts DIMENSIONS (HxDxW): 24.5 x 17.5 x 25 inches. The width between the arms is 20.75 inches. Th

Compression Sock Aid

The Compression Sock Aid is a sock aid designed for use by individuals with arthritis or mobility or grasping disabilities. Designed with a heel guide for putting on compression socks, this device features an extra wide design for people with edema or large feet, and high handles to reduce the need for bending or stretching. The sock aid is easily assembled and disassembled for travel. DIMENSIONS: The handle is 17 inches high.

Compression Stocking Aid (Models A75440 & A75441)

The Compression Stocking Aid, model A75440 and A75441, is a stocking aid designed for use by individuals who have difficulty bending or stretching to put on compression stockings. This device consists of a flexible plastic form which folds to fit inside a stocking to keep it open while the foot is placed in it. Grooves catch the stocking and keep it from sliding off the form until it is removed by pulling on the attached cord. As the cord is pulled, the unit slides out of the stocking, pulling t

Compression Stocking Aid With Heel Guide

Compression Stocking Aid with Heel Guide is designed for use by individuals with limited mobility as a result of surgery, arthritis, or stroke. This rigid and extra wide stocking aid includes extra-long handles as well as a heel guide that keeps the foot in position when pulling on a compression hose or stocking. 

Computer Chair

CUSTOM ADAPTATION PURPOSE: To provide mobile seating at a computer for an obese individual with mobility and other disabilities. The chair is mad of 35 millimeter square steel tube with gusseted legs and four casters. The chair also features angled back uprights and curved back cross bars to provide optimum support. At the front of each arm are soclets for mounting a keyboard and mouse tray. The seat, armrests, and backrest have plywood bases with foam padding.The backrest pads are split in two

Computer Desk Modifications

CUSTOM ADAPTATION PURPOSE: To enable an individual with spinal cord injury to use his computer from his wheelchair. A purchased self-assembly desk was modified to accommodate a powered wheelchair. Two 100-millimeter-high panels were added to the bottom sides of the desk to increase the height and enable the user to get his feet under the desk. A plywood panel was added across the back to strengthen it and the shelf below the desk top was removed. A U-shaped notch was cut in the keyboard surface

Computer Desk Modifications

CUSTOM ADAPTATION PURPOSE: To enable an individual with spinal cord injury to use a computer desk. With the purchase of a new wheelchair, the individual found that his existing desk was too high for comfortable use. Since the desk legs were mounted on square wooden blocks,the optimal height was determined and 50 millimeters was cut off the bottom of each block. TITLE: Helpful Adaptations. JOURNAL: TAD Journal. REF: Volume 26, Number 4, January 2007: p. 18. PAGES: 2 (including cover).

Computer Interface Music Maker

---- PROTOTYPE --------- PURPOSE: To develop a computer interface that tracks the movement of a user’s head, allowing them to produce electronic sounds and compose music on a virtual keyboard. Working with a team of musicians and programmers; Zane Van Dusen, Rensselaer Polytech Institute senior, creates a device to be used by individuals with severe mobility disabilities. This prototype allows individuals with severe mobility disabilities to express his or her creativity through music. The user

Comrade

Carrying bag for walker attaches to front bar of walker with velcro. Two pockets, one on either side of bar for balance. Interior pocket for small items. 12 inches long by 8 inches deep. Black or saddle. Vinyl.

Concept2 Indoor Rower (Model E)

The Concept2 Indoor Rower, model E, is a rowing machine designed for use by individuals with mobility ot lower extremity disabilities or low vision. The height of the seat makes it easier to get on and off for individuals with limited flexibility or mobility of the knees or hips, or with difficulties maintaining balance. The rower comes with a PM4 performance monitor with five display options, including large print. A long monitor arm puts the performance display within reach. Other features inc

Concord Ada Picnic Table (Model 07Eg1030)

The Concord ADA Picnic Table, model 07EG1030, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This table has seats on three sides and space for a wheelchair on one side. The table top is hexagon-shaped, with an umbrella hole in the center. The table is made from 100 percent recycled plastic. DIMENSIONS (WxH): The table top is 41 x 31.25 inches. Seats are 9.25 x 19 inches. The umbrella hole is 2 inches in diameter. WEIGHT: 330 pounds.

Concordia Wheelchair Tire, The

The Concordia Wheelchair Tire is a replacement tire designed for use by wheelchair users. This tire has non-marking and a center ridge for low rolling resistance. DIMENSIONS: 24 x 1.25 inches; this tire also fits 24 x 1 3/8 rims.

Concrete Deck Ramp System

The Concrete Deck Ramp System is a modular ramp system designed to provide wheelchair and scooter access in modular structures such as classrooms, offices, churches, and public buildings. This tough and durable ramp system looks and feels permanent, but is actually modular and can be relocated with a portable structure. The ramp has a heavy-duty steel tube frame with a concrete panel surface, with custom sizes and dimensions to fit the location. The ramp can withstand water, freezing and thawing

Cone Bed & Chair Raiser (Model Ha-4507)

Cone Bed and Chair Raisers, model HA-4507, are leg extenders designed for use by individuals with arthritis, back pain, or mobility or lower extremity disabilities. These molded plastic cone-shaped leg extenders raise the normal bed or chair height and are designed to be steady when in use. DIMENSIONS: The height is raised by 150 millimetes.

Conforma Extracted Pad (Models Msc0398046, Msc0398056, Msc0398057, Msc0398066, Msc0398157, & Msc0398156)

The Conforma Extracted Pad is a wheelchair decubitis pad designed for use by individuals with mobility disabilities or spinal cord injury at risk for pressure sores/ulcers. This foam pad is made of an anatomically conforming material that accommodates ischial tuberosities and the normal sacral shape to provide spinal support and stable positioning, distribute weight evenly, reduce pressure, and protect the integrity of the skin. The pad is available with a Nylex cover (models MSC0398046, MSC0398

Connect Tables (Rectangular)

The Connect Range series of rectangular and triangular tables have been designed to encourage an erect posture when your child is seated. All of the tables are adjustable in height and functional. The tables can be easily arranged into modular groups using rectangular and triangular configurations, to meet a variety of different classroom needs and to promote an inclusive environment for the child.

Conquest Wheelchair Bike

The Conquest Wheelchair Bike is a three-wheeled motorcycle with wheelchair platform designed for use by individuals who use wheelchairs. This vehicle is based on the BMW R-Series motorcycle with a front engine and rear wheel drive. Drivers can roll their wheelchairs onto the vehicle via an automated access ramp. The motorcycle has a reverse gear, and all of its controls are hand operated. Other features include keyless entry; waterproof interior trim; VDO Dayton single CD tuner with 140 watts ma

Conserver Dual Flush Het (Model 4213)

The Conserver Dual Flush HET, model 4213, is a tall toilet designed for use by individuals with mobility disabilities. This high, elongated toilet has a water consumption of 1.0 or 1.6 gallons per flush (gpf). It is made of stain-resistant vitreous china and has a brushed metal tank lever. The Conserver features a sanitary bar on the bowl for easy cleaning and a 2-inch glazed trapway. The seat and cover are not included. Installation instructions are included. DIMENSIONS (HxDxW): 30 x 29.875 x 1

Contemporary Styled Transfer Bench (Model 77356)

The Contemporary Styled Transfer Bench, model 77356, is a bathtub transfer bench designed for use by individuals with balance, lower extremity, or mobility disabilities. This bench has a contoured seat back with a handle for removal, sturdy legs with non-slip rubber feet, and a split seat with built-in drainage. The split seat allows the user to tuck in the shower curtain to avoid water leaking on the floor. The bench is reversible for shower use. OPTIONS: Shower Holder Attachment (model 77010);

Continental Back Pack

The Continental Back Pack is a wheelchair back pouch designed to attach to the chair's handgrips with straps. An inner pocket has a top zipper closure, or a flap with a velcro closure. One large and two small outer pockets are included for access to smaller items. DIMENSIONS: 16 x 16 inches. COLOR: Black or saddle vinyl.

Contour Seat Cushion (Model Sc1500)

The Contoured Seat Cushion, model SC1500, is a wheelchair seat cushion with a contoured base designed for individuals with severe physical disabilities who spend extended time in a wheelchair. The cushion is made of a variety of open-cell and closed-cell foams, starting with a closed-cell base and a contoured open-cell layer. Then a one-inch Viscoelastic contouring foam is overlayed, providing maximum pressure distribution. Velcro strips are sewn in the Rubatex slipcover for secure seat placemen

Contoured Handgrip Cushion (Model 816)

Contoured and angled handgrip of neoprene sponge with metal reinforced center. Completely replaces wooden crutch handgrip. Uses standard crutch hardware for attachment. Will fit all standard adult and medium size crutches. Width 4 1/16 inches.

Contoured Shawl (Model 16C301A)

The Contoured Shawl, model 16C301A, is a poncho or shawl designed for use by individuals who use wheelchairs. Designed specifically for use while a person is seated, this knee length shawl goes over the head requiring no arm insertion. This shawl has a high collar that can be turned up to protect the neck and ears from the cold. Other features include an overlapping front that fastens at the neck with hook and loop fastener. The shawl is made of polar fleece material. DIMENSIONS (LxW): 47 x 27 i

Convaid Carrot 3 Special Needs Booster Seat

Convaid Carrot 3 Special Needs Booster Seat is a restraint system designed for children and teens 3-15 years of age with special needs. This special needs booster was designed to provide optimal positioning & safety for children with limited head, trunk, and pelvic stability with neurological and motor disabilities. The “free angle” recline allows the hip area to recline for diaper access and changes (reclines at any position from 90 -180 degrees). Modular extensions and accessories allow e

Convert-Able Table

The Convert-Able Table is a height-adjustable tilt top work table designed for use by children and adults with mobility disabilities. This table features interchangeable snap-on table tops that allow it to be used for a variety of activities, such as reading and writing, art, and sensory stimulation. The height adjusts to enable a child in a floor sitter or an adult in a wheelchair or stander to use the table. Features include a powder-coated steel frame, four-dual locking casters, push-button

Converta Step

ConvertaStep is an incline platform lift that is designed for use by individuals with limited mobility and require assistance to navigate stairs. The ConvertaStep is constructed of heavy, weather-coated steel that can lift up to 750 pounds. Its smooth lift raises in 8 to 15 seconds and is 31 inches wide to accommodate most chairs and other mobility devices. It is designed to be inconspicuous to the eye and blends easily with any home decor. The small, cost-effective lift comes in 3 sizes and is

Convertible

---- PROTOTYPE --------- PURPOSE: To design a prototype a convertible ramp for individuals with mobility or lower extremity disabilities or spinal cord injury and others who use a wheelchair. The Convertible is a ramp that can be installed of a flight of functional stairs. It has several moveable plates that lay flat on each step; however, when a lever is pulled, these plates rotate to interlock into a single inclined plane, forming an access ramp that spans the flight of stairs. The device has

Converto Whirl-O-Wheel & School-Age Whirl-O-Wheel

The Converto Whirl-O-Wheel and School-Age Whirl-O-Wheel are hand-propelled, "chariot style" tricycles for recreational use by children age 3 and over. The device consists of a hammock seat of non-stretchable vinyl suspended on a steel tubular frame. The user sits between two cast aluminum wheels with non-marking, solid rubber tires. Each large wheel is powered directly by means of a horizontal handgrip fastened close to the outer circumference. The rear end of the carrier rides on a small third

Convoluted Wheelchair Pad With Nylex Cover (Models Cbc019055, Msc019008, Msc019005, & Msc019010)

The Convoluted Wheelchair Pad With Nylex Cover is a foam wheelchair cushion designed for use by individuals with mobility disabilities. The nylex cover is fluid-resistant and antimicrobial. The foam pad is convoluted or ridged to help prevent the user from sliding forward or out of the wheelchair. Model MSC019005 is latex-free. DIMENSIONS (HxLxW): 4 x 26 x 18 inches (model CBC019055), 2 x 16 x 22 inches (model MSC019008), 4 x 18 x 18 inches (model MSC019005), or 3 x 18 x 18 inches (model MSC0190

Copernicus Tabletop Easel

The Copernicus Tabletop Easel is an easel designed for use by individuals who use wheelchairs. This folding easel has a lightweight molded frame with a built-in carrying handle. The easel is equipped with two magnetic dry erase boards, one with one-inch spaced blue lines and one plain. The unit also features a ledge for books or markers on each side, a detachable pocket chart, and three removable Tiny Tubs that can be stored within the built-in tray. DIMENSIONS (WxDxH): 19 x 17 x 19 inches (fram

Core Laser Pro Exercise System By Laser Gym

The Laser Gym Core Laser Pro System is a therapeutic rehabilitation and training tool designed for physical therapy centers and other clinical settings. Each Pro system consists of two Core Laser Therapy Belts with travel bags, an institutional freestanding target that is specifically designed to accommodate a variety of patients, Tape Measure, Patient Progress Charting Material, instructional DVD and a premium carry case.

Corner Ball Pool

The Corner Ball Pool is a ball flotation therapy shape designed for use in soft play areas. This ball pool is designed to be used in conjunction with existing wall padding and so requires only two self-supporting walls. Both inner and outer walls (sold separately) are available. OPTIONS: Single ball pool step, set of four steps, ground sheet for ball pools, and sets of 1,000 balls. DIMENSIONS: The inner walls are 48 inches high. The outer walls are available in a choice of 36 inches high x 12 in

Corner Chair (Models C4, C4-C, C5 & C5-C)

The Corner Chair is an adjustable corner seat designed for use by children with neurological, mobility, or severe physical disabilities. This chair provides support for asymetrical posture and midline control of the head and trunk. All models include a firm, padded insert which converts the V-shaped back to a three-section wing back. The seat can be raised so the child can be positioned with the hips and knees flexed or lowered so that the hips are flexed and the legs extended to facilitate long

Corner Grab Bar

Stainless steel corner grab bar with vertical extension on one end. 1, 1 1/4 or 1 1/2 inch diameter, 1 1/2 inch wall clearance. Satin finish. Exposed or concealed mount. 48 by 24 by 32 inches high. Right or left.

Corner Guard (Model Dl2528)

The Corner Guard, model DL2528, is designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. The protectors prevent chipped plaster or paint or torn wallpaper resulting from bumping by wheelchairs, scooters, walkers, crutches, or canes. These protectors are made from durable plastic molded to fit over corner edges. They come with three screw holes pre-drilled on each side. DIMENSIONS: 48 inches high x 1/16 inch thick x 2.5 inches wide on each side. COLOR

Corner Mounted Tub Rail (Model 3236-C)

The Corner Mounted Tub Rail ##3236-C is a stainless steel wall to floor grab bar for bathtubs. The support consists of an L-shaped horizontal hand bar that attaches to the side and back walls of the tub, and a vertical bar that attaches to the underside of the hand bar and mounts in the floor on the outside of the tub. This grab bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS (WxDxH): 36, 40, 42, or 48 inch crosspieces x 12 x 32

Corner Shower Seat (Model F727120000)

The Corner Shower Seat, model F727120000, is a corner shower seat designed for use by individuals with balance or mobility disabilities. This shower chair fits into the corner of a stall requiring minimal space. It has a built-in front compartment that can be used to hold soap and a wash cloth. The chair is durable, rust proof, and easy to clean. DIMENSIONS (HxDxW): 16.5 x17 x 23 inches. The seat’s back height is 5.75 inches and the base is 24 inches. CAPACITY: 300 pounds. WEIGHT: 15 pounds. COL

Corner Toilet Bar (Models Gs711 & Gs712)

Stainless steel corner grab bar for toilet. 1, 1 1/4 or 1 1/2 inch diameter, 8 inch wall clearance. Satin finish. Exposed or concealed mount. 33 inches high with 8 inch perpendicular extension support. Right or left.

Corner Tub Bar.

Stainless steel corner wall grab bar. 1, 1 1/4 or 1 1/2 inch diameter. 3 1/2 inch wall clearance. Satin or safety grip finish. 20 inches by 36 inches.

Cot Modifications

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted cot modifications for a mother with cerebral palsy. This individual has balance disabilities related to her cerebral palsy and required a cot that she could lift the baby in and out from while in a kneeling position. The individual had an older-style steel cot with sides that slide down for access, but when the side was in the lowest position it was still above mattress height, and she could not reach over it to pick up the

Couch Cane

The Couch Cane is a transfer aid designed for use by individuals with mobility disabilities. This device consists of a crook-shaped handle with a cushioned grip on an adjustable powdercoated shaft resembling a standard cane affixed to a base with non-skid pads. This device can be used at either end of a couch or on either side of a large chair or recliner. The base slides under the furniture for stability and the handle can be used to assist in sitting down or in rising to a standing position.

Country Lift Chair (Model Tmr-400)

The Country Lift Chair, model TMR-400, is a seat lift recliner chair for individuals with limited mobility to help them get into and out of the chair. It features a sealed single switch, paddle type, hand control; 4 rubberized leveler legs; an oak frame; fire retardant materials; a quick disconnect of electrical components; and a double plate, wide base, steel frame for stability. The chair reclines 8 inches more than standard recliners for near full bed positioning. POWER: 115 volt AC, 1.5 amps

Country Pull-Out Kitchen Faucet (Model R77V3)

The Country Pull-Out Kitchen Faucet, model R77V, is a single lever kitchen faucet on flexible hose designed for use by individuals with grasping, upper extremity, or mobility disabilities. The end of the spout can be pulled out on a stainless steel coil. Other features include dissimilar ceramic discs for smooth operation, a chlorine-resistant inner liner, an IAPMO compliant double check valve, and 2.5 gallon per minute (GPM) capacity. OPTIONS: 1.75 inch extension kit for thick deck installation

CourtEdge Reducer

CourtEdge™ Reducers are threshold ramps designed to help make flooring transitions more accessible to individuals who use wheelchairs. These ramps can meet almost every floor transition requirement - from ½ inch up to 2½ inches in standard models, and custom heights exceeding 4½ inches. Made of 100% recycled rubber tire, CourtEdge™ Reducers have a slip-resistant surface and no load weight limitations. They are available in hundreds of configurations for interior and exterior use, and are pre-cut

Courtroom Lift Accessor

The Courtroom Lift Accessor is an interior wheelchair lift designed for use by individuals who use wheelchairs or who have walking or mobility disabilities. Designed for new construction or for retrofitting, this lift provides access to the witness box in a courtroom or it can be used to provide access the judge's bench floor level for court personnel.

Courtroom Rostrum Wheelchair Lift

The Courtroom Rostrum Wheelchair Lift is an interior wheelchair lift designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. It is intended to provide discrete access to an auditorium or courtroom. The lift has momentary (constant pressure) control switches on the platform, at the upper landing, and at the bottom landing. It features a twin-rail, chain and sprocket design. The quiet electric motor unit includes a standard battery backup. In the event

Cover-Up (Model 615)

Cover-Up, model 615, is a poncho-style robe designed for use by wheelchair users. This versatile garment can be used as a robe or for extra warmth when moving between the shower and bedroom. It goes over the head and is cut so the knees are covered when sitting. The back comes to the seat of the chair for transferring. The robe is made from a synthetic fabric and is washable. One size fits all. COLOR: Navy, green, or aqua.

Covered Outside Lift (Model Al3000)

The Covered Outside Lift, model AL3000, is a hitch-mounted scooter or powered wheelchair carrier designed for use by individuals who use wheelchairs. The plastic watertight cover keeps power chairs and scooters safe while the spring-assisted operation makes the cover easier to open and close. The carrier can be mounted on a class II or III trailer hitch and includes an integrated license plate mount. OPTIONS: Swing-away option. CAPACITY: 350 pounds. WARRANTY: Three-year transferable warranty.

Covered Solid Foam Cushion (Models F2050-6, F3050-6, & 4050-6)

Covered Solid Foam Cushions are foam seat cushions designed for use in wheelchairs. Made of high-density foam, these cushions provide firm seating and pressure relief and come with a zippered cover. DIMENSIONS: Model F2050-6 is 2 x 16 x 18 inches, model F3050-6 is 3 x 16 x 18 inches, and model F4050-6 4 is 4 x 16 x 18 inches. COLOR: The cover is navy.

Cozy Coats Caftan

The Cozy Coats Caftan is a men's or women's robe designed for use by individuals who use wheelchairs. Designed for after shower, bath, or swim, the garment is made of 100 percent cotton terrycloth. Its over-the-head style provides head-to toe coverarge, but has a short back to avoid difficult and time-consuming transitions for those who have inflexibility, contractures, or spasticity. Other features include dropped shoulders with ample armholes for easy access, short sides to avoid contact with

Cozy Coats Poncho

The Cozy Coats Poncho is rain poncho designed for use by youth who use wheelchairs. Designed to be convenient for power chair and scooter users, this hooded poncho has a 100 percent polyurethane shell and polyester lining and need only be wiped-clean for care. The poncho features two side snaps for an armhole option, and there are no pockets. SIZE: Youth size only. COLORS: Black, burgundy, and hunter.

Cozy Coats Raincoat

The Cozy Coats Raincoat is a raincoat designed for use by individuals who use wheelchairs. This multi-season coat can be worn for warmth and wet-weather protection. Designed with a long front and a short back to prevent bunching behind the seated user, this raincoat has short sides that do not drag in wheels, ample pouch pockets with right- and left-hand access, and a cowl collar and hood without strings, hooks, buttons or straps. Other features include a waterproof Taslan outer layer and an ant

Cozy Coats Slicker

The Cozy Coats Slicker is a raincoat designed for use by individuals who use wheelchairs. Features include Talsan weatherproof fabric cut with ample sleeves for easy access by individuals with limited flexibility, extra-long fabric in front to cover the legs, a short back to prevent bunching behind the seated user, and short sides to avoid fabric contact with wheels. Other features include a front pouch pocket with left-and right-hand access, and a cowl hood that requires no snaps, hooks, string

Cozy Coats Winter Coat

The Cozy Coats Winter Coat is a winter coat designed for use by individuals who use wheelchairs. Made with a double layer of anti-pill winter fleece and long in front and short in back, the coat provides full coverage without uncomfortable bunching in the back. The sides are short, and are designed not to drag in the wheels. Features include dropped shoulders and ample arm holes to accommodate users with limited flexibility, and a cowl collar with hood that does not require zippers, snaps, strin

Cozy Fleece Seatless Pants

Cozy Fleece Seatless Pants are designed to be worn by women who use wheelchairs. Made of polyester/cotton fleece, these pants feature a Velcro strip at the back of the waistband and a seat that can be fastened and unfastened to accommodate toileting needs and seated dressing. SIZES: Small, medium, large, and extra-large. COLOR: Navy, fuchsia, denim, or assorted colors.

Cozy Lap Blanket (Model 186)

The Cozy Lap Blanket, model 186, is a lap robe designed for use by men or women who use wheelchairs. This machine-washable lap blanket attaches around the waist with Velcro tabs. It is made of thermal, non-pill, hypo-allergenic, 100 percent polyester fleece. COLORS: Royal blue, charcoal gray, or purple.

Cozy Lap Blanket For Children (Model C186)

The Cozy Lap Blanket for Children, model C186, is a lap robe designed for use by children with mobility disabilities or spinal cord injury. This lap blanket attaches around the waist with Velcro tabs and is made from 100 percent polyester fleece. It is hypo-allergenic and machine washable. COLOR: Royal blue, charcoal gray, or purple.

Cozy Seat (Models 703005 & 703006)

The Cozy Cushion is a combination foam seat and back cushion with attached armrest pads designed for use with wheelchairs. This one-piece unit is covered in soft brushed poly and padded with high-density foam and prevents skin contact with a wheelchair's vinyl upholstery and metal parts. Covering the seat, back, and armrests, the Cozy Cushion permits use of seatbelts and positioning belts. SIZES: Model 703005 fits 16-inch wide chairs and 703006 fits 18-inch chairs.

Cpsc Standard Back (Models Sb-01 Thru Sb-06)

Seating insert. The standard back has integral waist bolsters that contribute to central positioning of the lower spine. Chest bolsters may be added easily without modifying the upholstery.

Cpsc Standard Pommel Seat (Models Sp-01 Thru Sp-06)

Wheelchair seat insert with integral pelvic bolsters and tapered side sections for pelvic centralization. Has a 15 degree wedged seat, a thigh shelf and an integral abduction pommel to provide good positioning and weight distribution. Standard cushion is removable and vinyl covered. Options include polyfoam or viscofoam cushion, lateral padding, reinforced side panels. 7 sizes: 11 inches wide by 13 inches deep, 12 by 14 inches, 13 by 17 1/2 inches, 14 by 18 inches, 15 by 20 1/ 2 inches, 16 by 20

Cpsc Transfer Seat (Models Ts-02, Ts-04, & Ts-06)

Wheelchair insert with integral pelvic bolsters and tapered side sections for pelvic centralization. Seat has 7 slope and a flat front profile. Unit clips directly over the wheelchair seat frame tubes, it seats the persons lower than normal for easier transfers, while still providing appropriate positioning.

Cpsc Wheelchair Trays (Models Lt 01, Lt 03, Lt 11, & Lt 13)

Wheelchair lapboards, ABS plastic. Safety rim around the perimeter keeps articles from sliding off. Inside edge may be modified as required. The tray attaches to any size wheelchair with brackets.

Crawford Wheelchair Accessible Picnic Table (Model Kspb6Gpicada)

The Crawford Wheelchair Accessible Picnic Table, model KSPB6GPICADA, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This long table has seats on two sides with space for a wheelchair on one end. The table top and seats are made from 100 percent solid recycled plastic boards with UV stabilized color. The galvanized steel frame has cross braces for additional support. Stainless steel assembly hardware is included. DIMENSIONS (HxLxW):

Crawl Along Snail

The Crawl Along Snail, model 1215, is a touch activated toy designed for use by children with severe physical or upper extremity disabilities or spinal cord injury. This toy snail in mounted on a tray for table top use to encourage swiping and reaching. Swiping at this smiley face snail causes it to move back and forth as it entertains users with lively music, dancing lights, and sounds. Users can lock the snail’s wheels and enjoy looking into the large mirror. POWER: Uses 2 AA batteries. DIMENS

Crawlabout Crawl Trainer

The Crawlabout Crawl Trainer is designed for children with neurological, physical, upper or lower extremity disabilities while instructing, encouraging and reinforcing crawling. The aluminum frame and foam-padded, suspended harness are height adjustable. Push handles can be attached as crawling skill progresses. The caregiver can steer from the rear to provide necessary assistance. SIZES: Small: Overall Width 23”, Overall Height 22-25", Overall Depth 18", Harness Width x Depth 12”, Harness Dept

Creating Ability's Universal Paddling Seat For Canoes

Creating Ability's Universal Paddling Seat for Canoes is designed for individuals with limited mobility due to a spinal cord injury, neurological impairment or illness impacting motor control. The Universal Paddling Seat’s back structure consists of pelvic, lateral, lumbar, and upper-back supports. The back has several vertical adjustments to fit different torso lengths and types. The upper unit (the upper-back rest and laterals) can be adjusted independently or removed completely, for those wh

Creating Ability's Universial Padding Seat

Creating Ability's Universal Paddling Seat is designed for kayakers with limited mobility due to a spinal cord injury, neurological impairment or illness impacting motor control. The Universal Paddling Seat’s back structure consists of pelvic, lateral, lumbar, and upper-back supports. The back has several vertical adjustments to fit different torso lengths and types. The upper unit (the upper-back rest and laterals) can be adjusted independently or removed completely, for those who do not need t

Crocodile Gait Trainer

The Crocodile Gait Trainer is designed for use in developing the walking skills of children with cerebral palsy or balance, neurological, or lower extremity disabilities. Standard features include a folding frame, anti-reverse locks, a height- adjustable back frame, rotational hand grips, directional lockout, and large solid wheels. OPTIONS: Sling seat; fold down seat; anti-tips; forearm supports with hand grips; and pelvic supports. SIZES: Sizes 1 and 2. DIMENSIONS (LxW): Size 1 is 28.75 x 24.5

Crosom 12 Inch Manual Scooter Board With Ultra Glide Casters

These scooter boards are designed for children or individuals who have physical developmental disabilities to help users further their gross motor skills by sitting and moving around by pushing off the floor with their legs. High impact resistant. Allow movement in any direction. Grasp inside handles to protect fingers during play. MATERIALS: Molded polypropylene, nylon casters. DIMENSIONS: 12 inch Length x 12 inch Width. COLORS: Purple, Orange, Yellow, Green, Blue, or Red.

Cross

The Cross is a manual wheelchair wheel designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. The wheel is made from computer machined 6061-T-6 polished billet aluminum. The spokes resemble a maltese cross. It has mirror bright surfaces, sealed bearings, and a double walled rim. Hand rims are available with quad projections and with an anodized or vinyl-coated surface. DIMENSIONS: 24 or 25 inch diameter. CAPACITY: 250 pounds. WEIGHT: 5 to 5.2 pounds.

Cross Wheelchair

The Swede Cross is a custom-built manual everyday wheelchair designed for use by individuals with mobility disabilities. FRAME: One piece aluminum casting side frames, aluminum double cross bars, steel back frame. Available widths: 14 to 18 inches in 1-inch increments. ARMRESTS: Height adjustable/reversible; 2 lengths with hard side guard included. UPHOLSTERY: Backrest is folding and locking back with an adjustable angle range of -7 to +15 degrees. Adjustable height range: 11.75 to 17.75 inches.

Cross-Sport

The Cross-Sport is a sport wheelchair designed for everyday use and use in occasional sporting events. FRAME: Lightweight, rigid titanium frame. WEIGHT: 15 pounds.

Cross-Sport C

The Cross-Sport C is a custom-designed sport wheelchair designed for everyday use and use in occasional sporting events. This chair enables the consumers to select the exact specifications and accessories desired for the chair. FRAME: Lightweight, rigid titanium frame with a fixed center of gravity. SEAT: Tapered seat. WEIGHT: 15 pounds.

Cruisaire (Models Ca11 & Ca13)

The Cruiseaire is a child's transport chair designed for use with children with mobility disabilities. FRAME (WxHxL): Both models have a lightweight folding frame with a grey hammertone finish. Open, odel CA11 is 20 x 37 x 31 inches without footrests and model CA13 is 21.5 x 37 x 33 inches without footrests. Folded, both models are 13 x 11 x 47 inches. An optional anatomic back frame is available on both models which stabilizes the head and neck to assist in the development of righting reflexes.

Cruiser (Models Cr11 & Cr13)

The Cruiser is a child's manual wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. Both models are available in standard and transit (bus/van tie-down) models. FRAME (HxLxW): Model CR11 is 37.5 x 31.5 x 19.5 inches and model CR13 is 37 x 33 x 21 inches. Folded dimensions are 12 x 46.5 x 12.25 for model CR11 and 12 x 46.5 x 12 inches for model CR13. SEAT (LxW): 9 to 12 x 11 inches on model CR11 or 10 to 13 x 13 inches on mod

Cruiser Anatomic (Models Cx12, Cx14, Cx16, & Cx18)

Cruiser Anatomic is a manual wheelchair designed for use by children or adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. This chair is available in standard and transit (bus/van tie-down) models. FRAME (HxLxW): Model CX12 is 36.5 x 44.5 x 21 inches, model CX14 is 36 x 36 x 23 inches, model CX16 is 37.5 x 39.5 x 26 inches, and model CX18 is 38 x 40 x 28 inches. Folded dimensions are 14 x 46 x 13 inches for model CX12, 14 x 46.5 x 14 inches for model CX14

Cruiser Ii

The Cruiser II is a folding wheeled walker with a seat designed for use by individuals with mobility disabilities. The 5-inch front wheels and rubber tips on the rear legs make the Cruiser II a beginning gait trainer. The frame is stable enabling the user to establish a natural walking pattern. OPTIONS: Seat pad, tray, tote bag, basket cover bag, hanging walker bag and travel bag. DIMENSIONS: Seat height is 20 inches; seat width is 17.5 inches; overall width is 21 inches; the handle can be a

Cruiser Ready

The Cruiser Ready is a child transport chair fitted with a range of positioning options. FRAME: Folding frame with reversible push handles available in the same sizes as the standard Curisers (see separate entry). This chair is available with or without tie-down brackets. SEAT: The seat is depth adjustable and the back-to-seat angle is adjustable. A reinforced seat with a canopy, headwings, trunk support, hip abductor, and padded shoulder straps with covers is standard. ARMRESTS: Padded armrests

Crutch Accessory Kit (Model T70040)

The Crutch Accessory Kit, model T70040, is a set of crutch tips, crutch handgrip pads, and crutch underarm cushions designed for use on wooden or aluminum axillary crutches. The set includes two reinforced rubber underarm pads (model T70010), two solid tube-style crutch handgrip pads (model 70020) with extra-thick cushioning, and two rubber crutch tips reinforced with metal washers (model 70034). DIMENSIONS: The crutch tips fit crutches with 7/8- or one-inch shafts. COLOR: The handgrip and under

Crutch Accessory Kit (Models 114 & 115)

The Crutch Accessory Kit, models 114 and 115, are crutch underarm cushion covers and crutch handgrip pads designed for use by people with walking, mobility and lower extremity disabilities who use axillary crutches. Each kit includes two covers that fit over the underarm portion of the crutch and two pads that wrap around the handgrip of each crutch. The pads are made from sheepskin and fasten with Velcro closures. All covers and pads are machine washable and dryable. SIZES: Regular (model 114)

Crutch And Cane Holder (Model 92)

The Crutch and Cane Holder, model 92, is designed to mount to the back of a wheelchair. The device features a strap and buckle at the top and a cup attached to the tipping lever to secure the crutches or cane.

Crutch And Cane Rack (Model 790)

The crutch and cane rack is constructed of ash hardwood and is equipped to hold up to 30 crutches and 10 canes. The mounting hardware is not supplied. DIMENSIONS (LxH): 60 x 17 inches; rod extensions are 15.5 inches from the wall.

Crutch Bag For Scooter

The Crutch Bag for Scooter is designed for use by people with lower extremity, walking or mobility disabilities who use crutches and a scooter. This bag, which is available made of nylon, sunbrella, or cordura, provides the means for transport a pair of crutches while seated in a wheelchair. The bag attaches to the back of a scooter using a bungee tie (included) and fits one pair of crutches in an upright position. It has an outer pocket for additional items and a flap with a Velcro closure. DIM

Crutch Bag For Wheelchair

The Crutch Bag for Wheelchair is designed for use by people with lower extremity, walking or mobility disabilities who use crutches and a wheelchair. This bag, which is available made of nylon, sunbrella, or cordura, provides the means for transport a pair of crutches while seated in a wheelchair. The bag attaches to the back of a wheelchair and fits one pair of crutches in an upright position. It has an outer pocket for additional items and a flap with a Velcro closure. DIMENSIONS (HxWxD): 20.5

Crutch Bag.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Bag attaches to handle of crutch to assist in carrying small items. Instructions are provided to make a small bag with gussets to attach to the side handgrip of a crutch. Includes drawing. SKILLS REQUIRED: Sewing. AUTHOR: Occupational Therapy Service. TITLE: REF: Resource Sheet: Institute of Physical Medicine and Rehabilitation, New York. .

Crutch Carrier

CUSTOM ADAPTATION PURPOSE: To provide a customized crutch carrier for a scooter used by person with post-polio syndrome. This device is created by cutting two 30 centimeter lengths of PVC tubing that are large enough in diameter to accommodate the lower part of the crutches while holding them firmly in position. Two tube clips are used to hold each piece of tubing in place, and are screwed through into the frame of the scooter seat back. TITLE: Carrying Crutches. JOURNAL: TAD Journal. REF: Volu

Crutch Chair

---- PROTOTYPE --------- PURPOSE: To design a prototype of crutches which can transform into a seat to rest the user's tired legs for individuals with mobility, lower extremity or walking disabilities or a person recovering from an injury. These forearm crutches are made from plastic polymer and have an arch-type construction so that the hand grips can be joined together to form a small seat. The user can lean the joined crutches up against a wall to form a seat on which the individual can lean

Crutch Handgrips (Models 6018 & 6475)

Crutch Handgrips are handgrip cushions made of molded sponge rubber with a ribbed inside surface. The handgrips come in both an open style (6018) and a closed style (6475).

Crutch Holder

DO IT YOURSELF ENTRY --- PURPOSE: To keep his wife’s crutches handy from her wheelchair, Mel Nowland, a retired engineer, mounted a loaf pan to the bottom of the chair with electrical brackets. He added Velcro straps to fasten the crutches in the pan so his wife can carry them with her. AUTHOR: Wechsler, K. TITLE: Doing It Yourself. JOURNAL: Quest. WEB SITE: http://www.mda.org/publications/Quest/q113diy.html. REF: Vol. 11, No. 3, May/June 2004. PAGES (including cover): 4.

Crutch Organizer (Model C125), Crutch Bag (Model C140), & Large Crutch Bag (Model C145)

The Crutch Organizer, model C125, Crutch Bag, model C140, and Large Crutch Bag , model C145, are carrying bags designed for use by individuals who use crutches. These waterproof nylon bags attach to the crutch handgrips with Velcro loop loc straps and have Velcro closures. DIMENSIONS (HxWxD): Model C125 is 5.5 x 8 x 2 inches; model C140 is 10 x 6 x 3.5 inches; and model C145 is 12 x 10 x 3.5 inches. COLOR: Black.

Crutch Pads (Model 6017)

Crutch Pads are underarm cushions designed to pad the top of axillary crutches to make them more comfortable. The pads are made of molded sponge rubber with a ribbed inside surface.

Crutch Splints For A Quadriplegic Child.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Molded plastic finger splints to allow a quadriplegic child with no active finger motion to hold on to and propel crutches. Describes finger splints and provides a drawing and photographs of how they work. SKILLS REQUIRED: Plastics. AUTHOR: Carter, C TITLE: Crutch Splints for a Quadriplegic Child JOURNAL: American Journal of Occupational Therapy REF: Vol 33 no 8, Aug 1979: p 527-528 PAGES (including cover): 2 1979.

Crutch Tip For Ice Walking.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Retractable metal rod attached to crutch tips for increased safety when walking on ice. A wooden block is screwed onto a metal faceplate slotted to permit a metal rod to slide up and down the middle of a crutch and lock into place. The block is bolted to the crutch just under the handgrips. A small hole is drilled through the crutch tip to allow the point of the metal rod to extend beyond the crutch tip as needed. Includes photograph and diagram. COMME

Crutch Tips (Models 6020 & 6021)

The Crutch Tips are designed to fit on the bottom of crutches for better traction. The tips are made of natural rubber with a swivel design for traction and flexibility. Shock is absorbed by a large cushioned base. The tips have wide vacuum sealings grip. DIMENSIONS: 1 7/16 inch diameter base x 2 inches high (Medium, $1.65) and 2 inch diameter base x 3 inches high (Super, $2.75).

Crutcheze Crutch Padded Covers

The Crutcheze Crutch Padded Covers are crutch handgrip pads underarm cushion with covers designed for use by individuals with balance, walking, mobility and lower extremity disabilities and others who use crutches. The set includes two underarm covers and two wrap hand grip covers, each with 2 pieces of removable contoured design padding. These contoured pads fit all standard youth and adult underarm crutches. The padded covers wrap around the crutch handles and are held in place by hook and loo

Crutcheze Walker Padded Handgrips

The Crutcheze Walker Padded Handgrips are handgrips for walkers designed for use by individuals who have balance or walking disabilities and others who use walkers. Made of foam premium padding and stretch, anti-bacterial fabric, these contoured pads fit all standard walker handgrips. The padded covers wrap around the walker handles and are held in place by hook and loop closures. The pads are reversible with a design that is sensitive to body weight to alleviate hand stress and sensitive to pre

Crutcheze Walker Side Bag

The Crutcheze Walker Side Bag is a carrying bag for walkers designed for use by individuals with walking or balance disabilities. This carrying bag has a stretchable pouch with an interior liner pocket to keep personal items such as wallets, electronic devices and water bottles. Other features include removable adjustable straps and side loops and hooks that allow the user to attach the bag to the side of the walker or bedrail for ease of access. The bag is made of durable stretch fabric that is

Ctl Series Classroom Table

The CTL Series Classroom Table is a height-adjustable classroom table and computer work station designed for use by children who use wheelchairs. This table can be used in school computer labs. The work surface is made from high-density laminated wood and is supported by a powder-coated steel frame. OPTIONS: Enclosed CPU holder; keyboard drawer; keyboard arm and tray; modesty panel; wheel kit; surge protector; cable management kit; table to table cable connection kit; floor to table cable connec

Ctm 3-Wheel Economy Scooter (Model Hs-320)

The CTM 3-Wheel Economy Scooter, model HS-320, is a 3-wheeleed scooter designed for use by individuals with mobility disabilities. Standard features include a front headlight, front basket, side reflectors, and rear view mirror. FRAME (HxLxW): 37 x 43 x 21 inches. The ground clearance is 1.5 inches and the turning radius is 33.5 inches. Available in red, silver, or blue. CONTROLS: Large control panel with key switch and thumb levers. The tiller is adjustable. SEAT: 18-inch lightweight, padded, s

Ctm 3-Wheel Road Class Scooter (Model Hs-730)

The CTM 3-Wheel Road Class Scooter, model HS-730, is a 3-wheeled heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front and rear bumpers, a headlight, directional signals, rear view mirror, and under-seat storage. FRAME (HxLxW): 39.8 x 53.5 x 25.2 inches. The ground clearance is 3.0 inches and the turning radius is 43.3 inches. Color choices are blue, silver, or red. CONTROLS: Adjustable tiller with charging port, ke

Ctm 4-Wheel Deluxe Scooter (Model Hs-686)

The CTM 4-Wheel Deluxe Scooter, model HS-686, is a 4-wheeled heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front and rear bumpers, headlight, directional signals, rear view mirror, and under-seat storage. FRAME (HxLxW): 39.8 x 52.4 x 25.2 inches. The ground clearance is 3.0 inches and the turning radius is 43.5 inches. Color choices are blue, silver, or red. CONTROLS: Adjustable tiller with charging port, key swit

Ctm 4-Wheel Economy Scooter (Model Hs-360)

The CTM 4-Wheel Economy Scooter, model HS-360, is a 4-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, headlight, side reflectors, and under-seat storage. FRAME (HxLxW): 36 x 46 x 21 inches. The ground clearance is 1.5 inches and the turning radius is 52.3 inches. Color choices are blue, silver, or red. CONTROLS: Angle-adjustable tiller with full tiller shroud with charging port, key switch, and

Ctm 4-Wheel Mid Range Scooter (Model Hs-580)

The CTM 4-Wheel Mid Range Scooter, model HS-580, is a 4-wheeled scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front and rear bumpers, headlight, side reflectors, rear view mirror, and under-seat storage. FRAME(HxLxW): 38 x 50 x 24 inches. The ground clearance is 1.9 inches and the turning radius is 62.6 inches. Color choices are blue, silver, or red. CONTROLS: Console with charging port, key switch, and handle bars. The till

Ctm 4-Wheel Mini Scooter (Model Hs-250)

The CTM 4-Wheeled Mini Scooter, model HS-250, is a 4-wheeled travel scooter designed for use by individuals with mobility disabilities. A front basket is standard. FRAME(HxLxW): 33 x 38.6 x 18.7 inches. The leg room is expandable. The ground clearance is 1.6 inches and the turning radius is 44.3 inches. This scooter is available in red or yellow and has a front bumper. CONTROLS: Foldable tiller with large control panel with key switch and handlebars. SEAT: Foldable, padded 14-inch seat. ARMRESTS

Ctm 4-Wheel Mobility Scooter (Model Hs-890)

The CTM 4-Wheel Mobility Scooter, model HS-890, is a 4-wheeled heavy-duty scooter designed for individuals with mobility disabilities to use over rugged outdoor terrain. Standard features include full light kit with directional turn signals, front basket, front and rear bumpers, headlight, rear view mirror, and under-seat storage. FRAME(HxLxW): 49.6 x 60.0 x 26.0 inches. The ground clearance is 3.4 inches and the turning radius is 66.2 inches. This scooter has front and rear suspension. Color ch

Ctm 4-Wheel Road Class Scooter (Model Hs-740)

The CTM 4-Wheel Road Class Scooter, model HS-740, is a 4-wheeled heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front and rear bumpers, headlight, directional signals, rear view mirror, and under-seat storage. FRAME (HxLxW): 39.8 x 55.5 x 25.2 inches. The ground clearance is 3.0 inches and the turning radius is 66.9 inches. Color choices are blue, silver, or red. CONTROLS: Adjustable-angle tiller with charging port

Ctm Mid Range Scooter (Model Hs-570)

The CTM Mid Range Scooter, model HS-570, is a three-wheel powered scooter designed for use by individuals with mobility or lower extremity disabilities. FRAME (HxLxW): 39 x 49 x 24 inches. The frame has 1.9 inch ground clearance and is available in red, blue, or silver. Features include reflectors, a mirror, and a storage area. CONTROLS: On/off key switch and speed control knob. RWD: Rear-wheel drive. SEAT: 18-inch wide swivel seat with headrest. ARMRESTS: Flip-up, width-adjustable armrests. BRA

Ctm Mini Scooter (Model Hs-235)

The CTM Mini Scooter, model HS-235, is a 3-wheeled travel scooter designed for use by individuals with mobility disabilities. A front basket is standard. FRAME(HxLxW): 33 x 38.6 x 18.7 inches. The ground clearance is 1.6 inches and the turning radius is 35.8 inches. This scooter disassembles into two parts for travel or storage, offers expandable leg room, and has a front bumper. This scooter is available in red or yellow. CONTROLS: Large control panel with key switch on the adjustable folding t

Cubex Therapy System On Wheels

The Cubex Therapy System on Wheels is a fine motor training kit designed for use with individuals with neurological disabilities and/or who use wheelchairs. This wheeled station accommodates four users standing and/or in wheelchairs At the ends of the unit are 90-degree fold-away work surfaces with bolt boards and a pegboard that opens to 60 or 90 degrees. Other features include a slide-out full-width plastic-laminate work surface and a reversible activity board in the top with a pegboard on one

Cubit Cane

DO IT YOURSELF ENTRY" ----- PURPOSE: To assist individuals with low vision who use powered wheelchairs in reaching elevator call buttons or buttons on the control panel for higher floors. This short cane constructed from parts of damaged canes can be constructed of spare parts from damaged canes and attached to the wheelchair using hook-and-loop strips. Cut a cane grip and shaft to 17 inches. Install a slip-over tip on the end of the shaft, increasing the length to 18 inches. Complete the tool b

Cuddlebug

The CuddleBug is a stroller designed for use with children with mobility, neurological, or severe physical disabilities. This stroller offers tilt, full recline, and hi/lo capabilities and accepts two seating modules to accommodate growth. The unit folds for transportation and storage without removing the seating module. The unit offers 5 to 30 degrees of adjustable tilt and 90 to 160 degrees of adjustable recline. Standard features include a height-adjustable push handle; a padded seat insert w

Cumfy Forearm Crutches

Cumfy Forearm Crutches are height adjustable Canadian style crutches. These single adjustment front opening crutches are available with plastic closed or open cuff. DIMENSIONS: Model 3500 is adjustable from 25 to 30 inches; Model 3550 adjusts from 35 to 44 inches; model 3555 adjusts from 27 to 36 inches; and model 3560 adjusts from 19 to 28 inches.

Cup Holder

The Cup Holder is a wheelchair cup, glass, mug, or can holder designed to allow individuals who do not have the use of their hands to drink through a straw from his/her own cup without assistance. The plastic adjustable cup cradle is fixed to the top of a 10 mm stainless steel rod. The rod is mounted onto the wheelchair arm with a plastic connector. The cradle has two openings on either side for a mug handle and will accommodate a wide variety of drinking containers, allowing the user to use a p

Cup Holder

DO IT YOURSELF PURPOSE: To provide powered wheelchair users with the ability to carry beverages. A cup holder designed to clamp to an automotive air vent can be adapted for use on a wheelchair. Zip ties can be used to secure the holder squarely to the frame where it works best for the user. TITLE: Cup Holder. REF: http://www.wheelchairmodifications.org. The organization can also be reached at Wheelchair Modifications, 5533 A Pony Farm Drive, Richmond, VA 23227.

Curb Cut Ramp

The Curb Cut Ramp, also called the Built-Up Curb Cut Ramp, is a curb ramp designed for use to provide wheelchair access at curbs. This ramp has a built-in non skid surface with side wings to allow safe access onto and off the curb. This portable unit can be installed at any curb, and is suitable for either permanent or temporary use. It is sturdy enough to support the weight of a vehicle that may roll over it.

Curb Ramp

The Curb Ramp is a portable ramp designed for use by people who have lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. It is intended to help a person to get over curbs or uneven thresholds. Made from aluminum, the ramp is available with wheel guards on both sides, or with no wheel guards, allowing it to be used at a threshold where a door swings out. It has transition plates on both ends for a smooth entrance onto or exit off of the ramp. DIMENSIONS

Curbside Voting Sign

The Curbside Voting Sign, model O-40, is an access sign indicating the availability of curbside voting for boters with disabilities. This silk screened sign is made of rust-proof corrugated plastic, and has the words, "Curbside Voting," above the International Access Symbol. The lightweight sign fits on a stand, which is sold separately. DIMENSIONS (HxW): 22 x 14 inches. COLOR: Blue print on white background.

Curbside Voting Sign (Model Sg-103F)

The Curbside Voting Sign, model SG-103F, is an access sign designed for use to direct voters with disabilities to an accessible voting location or polling place. The sign features the International Access Symbol (a stylized drawing of an individual in a wheelchair) with the word "CURBSIDE" above the symbol and the word "VOTING" below. It is made from corrugated plastic for all weather conditions and attaches to the Corrugated A-Frame (SG-F) which is sold separately. DIMENSIONS (HxW): Sign face i

Curling Guide

CUSTOM ADAPTATION PURPOSE: To provide a customized adaptation to enable individuals who use powered wheelchairs to participate in curling (a game similar to shuffleboard). Since one hand was required to control the speed and direction of the wheelchair, this left the players only one hand with which to control the push rod and rock when two hands are required. The Curling Guide allows users to finely aim and control the forward motion of the rock. The guides are a quick connect/disconnect to th

Cursum Stroller

---- PROTOTYPE --------- PURPOSE: To design a prototype of a stroller adapted for a wheelchair to be used by individuals with lower extremity and mobility disabilities, spinal cord injury, and others who use wheelchairs. The Cursum stroller, a wheelchair adaptive stroller, is designed to be used in tandem with a wheelchair. It connects to the front of a wheelchair. Swivel wheels, complete height adjustment, attention to comfort and visibility, and advanced safety features give parents with disab

Curtis Pmc Speed Controller (Model 1203A)

The Curtis PMC Speed Controller, model 1203A, is an electronic acceleration and speed limiter designed for heavy duty permanent magnet motor applications for wheelchair users. It offers infinite y adjustable drive and brake control; automatic dual ramp reversing; adjustable reversing speeds; regenerative braking; a high frequency (silent) operation with low end torque, and thermal protection in case of overheating. This speed controller is compatible with most motor units, and the main power con

Curtis Wheelchair Battery Fuel Gauge (Model 900W)

Battery gauge monitors charge for any lead acid deep cycle 12 or 24 volt wheelchair battery. LED bar displays battery charge level. Attaches to arm of chair in view of user with a hook loop fastening system. Alarm flashes once when battery is low and needs recharging, double flashing light indicates battery is near dead. When on empty, wheelchair can still travel short distance. Unit resets to full when charge is 80 percent complete and charge takes another 2 or 3 hours to complete. Display ligh

Curved Handicap Voting Booth Leg Adapter Kit (Model 1270)

The Curved Handicap Voting Booth Leg Adapter Kit, model 1270, is a voting booth accessory designed for use to make a standard voting booth accessible to individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs. The legs are curved to provide greater width between the booth legs to accommodate a wheelchair. This kit converts any Poll Star Voting Booth or All Vote Voting Booth into an accessible voting booth.

Curved Transfer Board

The Curved Transfer Board is a transfer board designed for use by individuals who use wheelchairs. Made of solid, reinforced, waterproof plastic that resists chipping, shattering, and splintering, this board has tapered ends and a smooth surface for easy sliding. The curved design accommodates a variety of transfer situations, and slip-resistant pads on the underside at each end increase stability. DIMENSIONS: 27 5/8 inches long and 14 5/8 inches wide tapering to 10 1/8 inches wide in the middle

Cushion Grip Shoehorns (Models 30035, 30036, 30037, 30038 & 30039)

Cushion Grip Shoehorns are long-handled shoehorns and shoehorns with built up handles to assist people with difficulty in bending and grasping in donning and removing shoes. All models have padded foam handles with a rope loop. DIMENSIONS: Model 30035 is 12 inches long, model 30036 is 18 inches long, model 30037 is 24 inches long, model 30038 is 30 inches long, and model 30039 is 36 inches long. The foam handles are 5.5 inches thick. WARRANTY: The manufacturer warrants this product against defec

Cushion Stop (Model 5035)

The Cushion Stop, model 5035, is a cushion retainer designed to prevent a cushion from sticking out the back of a wheelchair. The heavy cotton duck fabric insert attaches permanently to the seat and back of the wheelchair to prevent the cushion from sliding out. Grommets in the webbing straps attach to the upholstery screws on the back and seat. SIZE: For standard adult or narrow adult wheelchair.

Cushion-It: Medical Sheepskin Wheelchair Pad

The Cushion-it: Medical Sheepskin Wheelchair Pad is a wheelchair seat cover designed for use by individuals at risk for pressure sores/ulcers. Machine washable and urine resistant, this Australian Medical Sheepskin pad can also beused as a back pad and reduces pressure and absorbs perspiration. The HiTemp UR Australian Medical Sheepskin Pads are held securely in place by straps with Velcro adjustment and closure. The leather of these sheepskins is perforated by an array of small holes to facilit

Custom Adapted Cot

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted cot/crib for a mother with muscular dystrophy who has difficulty bending and lifting. An adaptation was needed to a cot that is low enough for the mother to access from her wheelchair but tall enough for her chair to slide under and to access easily while standing. First the cot was raised onto timber pillars to lift it higher. A sliding door was cut in half to create two doors which open out at 180 degree angles. The doubl

Custom Adapted Footstool

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted footstool for an adult with cerebral palsy. This individual worked as a disability advocate and often spends most of her eight-hour work day at her desk. She had difficulty with her feet resting on the floor while sitting and would experience swelling and muscle spasms, particularly when she was tired. Commercially available footstools were ill suited. The custom adapted stool was created using lightweight plywood to constr

Custom Adapted Wheelchair Lawnmower

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted lawn mower for an avid gardener and an individual enjoys working on her garden and also uses a manual wheelchair. Since sustaining a spinal cord injury, a woman uses a manual wheelchair for mobility but as a result she is no longer able to push a lawn mower and propel her wheelchair at the same time. To create a wheelchair lawnmower, a string line trimmer was modified to operate similar to an upright vacuum cleaner, pushin

Custom Basketball Wheelchair

The Custom Basketball Wheelchair is a sports wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. Each wheelchair is custom built to individual specifications for size, rake and camber. FRAME: Aluminum (standard) or titanium (optional); fixed camber bars from 10 to 20 degrees; rear anti-tips; powder coat finish. SEAT: Adjustable back height (standard). Options include adjustable tension seat back; alloy seat base; waist strap; back bar c

Custom Bath Seat

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted bath seat for an individual with multiple sclerosis. After falling in the shower, this individual determined she needed some way of stabilizing herself when using her over-bath shower. Various devices suggested by her physical therapist provided to be unsuitable for the older-style bath that has a narrow lip on the wall side. A customized bath seat, which the individual could transfer on and off independently and was remova

Custom Chair

CUSTOM ADAPTATION PURPOSE: To accommodate a child's disabilities to improve upper body range of motion and overall independence. The chair was built to the style of a supplied model. Features include a slightly reclined back, side panels, a drop-away pommel at the front of the seat plate, provision for fitting a pelvic positioning belt, and a footplate with footcups. TITLE: Successful Projects in Brief: Chair for Boy in Special School. JOURNAL: TAD Journal. REF: Vol 23 no 1, Autumn 2003: p.19

Custom Fit Aluminum Cane

The Custom Fit Aluminum Cane is an adjustable cane designed for use by individuals with mobility disabilities. This cane can be cut to fit the needs of the user and features a choice a standard crook or offset handle, a foam grip, and a rubber tip with metal reinforcement. CAPACITY: 250 pounds. WEIGHT: 13 ounces. COLOR: Silver. WARRANTY: Limited lifetime warranty.

Custom Footplates

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create custom adapted footplates for an electric wheelchair used by an individual with reduced mobility and strength. When this individual sits in her chair with the footplates at a comfortable height for her, they rubbed on the wheels, particularly when she was turning. Additionally, this individual did not have enough strength in her feet to push the footplates up out of the way when she wanted to get out of the chair. Sometimes a care giver co

Custom Lawn Bowl Wheelchair

The Custom Lawn Bowl Wheelchair is a sports wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. Built to comply with lawn bowls regulations for using wheelchairs on the green, this wheelchair is custom built to the user's specifications for size, rake and camber. The low ride height puts the user closer to the green, and the wide castor positions allow the user's feet to clear the castor wheels. Wheel/frame offsets can be built in to he

Custom Motorized Trikes

Custom Motorized Trikes are powered adult tricycles designed for use by individuals with mobility or lower extremity disabilities. Motorcycles and sidecars are custom converted to motorized tricycles with hand controls that eliminate shifting with the left foot. Honda and Harley Davidson models can be converted using Motor Trike conversion kits. OPTIONS: Kliktronic electronic shifter; Champion reverse gears; Champion EZ-Steer; trailer hitch dock.

Custom Powered Scooter

---- PROTOTYPE --------- PURPOSE: To create a prototype a custom powered scooter for an child with Thrombocytopenia with Absent Radius (TAR) syndrome that assists him in traveling but is not as cumbersome and restrictive as a powered wheelchair. The Custom Powered Scooter is modified from an E200 Razor electric scooter. Custom additions include a free-wheel mechanism, adjustable seat, auxiliary wheels, extended handlebar, and foot-mounted brake and accelerator controls. A one-way bearing incorpo

Custom Redwood Ramp

Custom Redwood Ramps are ramps designed for use by individuals with lower extremity, mobility, or walking disabilities or spinal cord injury. This heavy duty ramp works with wheelchairs, walkers, scooters or canes. Each ramp is custom designed to meet the requirements of a specific environment, including situations where an redwood ramp is preferred over a standard aluminum ramps for aesthetic reasons. OPTIONS: Handrails can be added on one or both sides.

Custom Seat Cushion

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual who uses a wheelchair to sit for longer periods. A sideways groove 1.5 inches wide was cut into a four-inch thick piece of foam exactly where the user's sitting pressure points are. To maintain the integrity of the foam, the groove starts 2 inches in from each side. A V-shaped groove was cut under the tail bone. The two grooves move sitting pressure to the fleshier parts of the legs and buttocks and alieviates direct pressure on bony area

Custom Solution Comfort Seat (Model Scs-Cust)

The Custom Solution ComfortSeat, model SCS-CUST, is a custom-built personal cleansing system designed for individuals with mobility, balance, upper ectremity, or neurological disabilities, spinal cord injury, or arthritis. The device installs on the toilet, replacing the seat. This model can be configured for the individual's special needs. The customized controls include the choice of a left or right control lever, back controls, or wired remote control. Features include an adjustable rear was

Custom Swing

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted swing for a child with muscular dystrophy (MD). The child wanted to play on the swing set in his backyard, but he had difficulty maintaining his posture and staying upright and balanced. After an initial evaluation, two TAD volunteers created a design for a swing that would suit the child and fit the families’ swing set. The design incorporated a tilt in swing seat that allowed gravity to support the child’s upper body when

Custom Tennis Wheelchair

The Custom Tennis Wheelchair is a sports wheelchair intended for individuals with lower extremity or mobility disabilities or spinal cord injury. The strong lightweight frame is configured to allow adjustment of the seat for comfort while playing tennis. FRAME: Each frame is built to individual specifications for size, rake and camber. Oval aero tubing is used extensively throughout the frame for increased lateral strength. Rolled oval tubing under the seat sling allows the use of an adjustable

Custom-Designed Shower Chair

CUSTOM ADAPTATIONPURPOSE: To enable caregiver -assisted showering of an adult with severe multiple disabilities. This individual is unable to sit independently and cannot use a conventional shower chair due to scoliosis and hip positioning issues. The chair was built with the narrowest possible width to accommodate maneuvering in narrow areas of the home. This chair has a 22 millimeter zinc-dipped, powder-coated steel tube frame with triangular struts for added durability and stability. Caster w

Customized Double Sized Bed

CUSTOM ADAPTATION PURPOSE: To provide a customized bed for children with multiple disabilities. The customized bed was created for twin boys who have multiple disabilities including cerebral palsy, epilepsy, developmental delays, and vision and hearing disabilities. Caregivers wanted the two boys to be able to have shared sleeping arrangements due to the therapeutic benefits seen as a result of the boys' emotional bond. Additionally, the customized bed was to be placed in a family room rather t

Customized Electronic Stroller

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a customized electronic wheelchair (herein referred to as stroller) for a 10-year-old boy who has spinal muscular atrophy. Due to the nature of his condition, the child prefers to remain horizontally positioned, and the stroller design accommodated that. The electronic stroller can be manually pushed or controlled electronically. The user interface for the electronic controls includes a single touch button that the user can press whenever t

Customized Four-Wheel Bike

CUSTOM ADAPTATION PURPOSE: To provide mobility for a child with Ullrich congenital muscular dystrophy. Although the child has a wheelchair, it proved difficult to maneuver in the house and did not provide any lower extremity exercise. It was discovered that a four-wheeled bike without pedals worked well for him, allowing him to propel the bike with his feet. However, commercially-available models were not strong enough for daily mobility use, so a custom model was built. The forks and handlebar

Customized Hand Controls

The Customized Hand Controls are a driving control system designed for use by people with lower extremity or neurological disabilities or spinal cord injury to use only their hands to operate automobiles, trucks, self-propelled lawn and garden equipment (including riding lawn mowers), and farm vehicles (including tractors). Each set of controls is individually developed for a user. The controls can be applied to the clutch, brakes, throttle and any other function of the vehicle. They can be int

Customized Shower Seat

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a customized shower chair for an individual with campomelic dwarfism and intellectual disabilities. This individual required a caregiver to bathe her but without getting water in her ears. Previous methods and adaptations were not useful as they required the assistance of another individual and/or they were hard on the care giver’s back. This customized adaptation is modified version the “Matilda” bath seat design which rests on a bath stan

Customized Table

CUSTOM ADAPTATION PURPOSE: To provide a customized table with a top level for a laptop computer and a lower slide-out lockable tray for a keyboard for persons with visual impairments, diabetes, and mobility disabilities who use a manual wheelchair. The table top and tray are made from plywood with pine surrounds, and the legs are solid maple. The legs have lockable casters so the table can be easily moved and stored when not in use. The tray slides back and forth in slots on either side, and i

Cut-Out Table And Foot Support

CUSTOM ADAPTATION PURPOSE: To provide a child with multiple disabilities with a work and play surface. Using an existing round table as a base, a removable square tabletop with a cut out in the center of each side was designed to be clamped on. Made of 18-millimeter (mm) thick MDF, the corners of the top were rounded and wooden cleats were fitted under each of the four sides. The cleats are turned and locked with T-bolts to secure the square top to the table. A platform of 9-millimeter plywood

Cut-Out-Seat Slip (Model Wb018)

The Cut-Out-Seat-Slip, model WB018, is a slip designed for women who have difficulty raising their arms or who use wheelchairs. It is made of a cotton/polyester blend material, snaps down the back for ease of dressing, and has wide straps prevent slipping off shoulders. SIZES: Small, medium, large, extra large, extra extra large, and extra extra extra large. COLOR: White.

Cycl-One 3, 12, 48

The Cycl-One is a cycle attachment for manual wheelchairs designed to transform the chair into a hand-propelled cycle. The attachment consists of a front wheel, handcrank shaft, and attachments for mounting onto the wheelchair frame. FRAME: The frame is made of high tensile steel tubing and the crankset is alloy with a 28-tooth chainring (3 and 12 speed models) and 34 tooth chainring on the 48-speed model. HANDLES: The "together"-style hand pedals with parallel horizontal handgrips are designed

Cycle Rack

CUSTOM ADAPTATION PURPOSE: To enable an individual who uses a hand-propelled cycle wheelchair to transport it to cycling trails. A solution was developed that enables the individual to load the cycle, one end at a time, from his wheelchair onto a rack attached to a hitch on the back of his car. A short tubular bracket was attached transversely to the frame of the cycle at the center of gravity. A carrier pin was mounted to project horizontally from the hitch bracket; the pin engages with the tu

Cyclone Advantage 4

The Cyclone Advantage 4 is an adult manual wheelchair designed for use by individuals with lower extremity or mobility disabilities and spinal cord injury. The chair is adjustable for use in everyday life or as a sport wheelchair, with a low and maneuverable configuration for tennis or a high and stable configuration for basketball. FRAME: Hand-built adjustable frame. SEAT: The seat height can be raised and lowered without changing the backrest angle.

Cyclone Enigma

The Cyclone Enigma is a lightweight sport wheelchair designed for use by individuals with lower extremity and mobility disabilities or spinal cord injury. The chair is available in rugby or basketball configurations. FRAME: Manufactured from aluminium alloy or titanium aerospace alloy tubing.

Cyclone Mtm 7020

The Cyclone MTM (Made To Measure) 720 is a lightweight manual wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME: Handbuilt frame made from 7020 aluminium alloy, with adjustable camber bar and choice of frame color. Optional one arm drive. CUSHION: Choice of cushion thickness. UPHOLSTERY: Fabric or leather upholstery; leather upholstery is available in black or red. BRAKES: Choice of brakes. CASTERS: Choice of caster size and sty

Cyclone Pro-Competition (Models Pc Ht & Pc Ti 325)

The Cyclone Pro-Competition is a sport wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Available in high tensile aluminium alloy (model P CHT) or titanium aerospace alloy (model PC Ti 325). SEAT: Tapered seat for leg stability. The chair is available with a high frame for basketball or low seating for rugby and tennis. CASTERS: Wide caster positions to prevent picking.

D'lux Pullout Kitchen Faucet (Models R3830U-Apc, R3810U-Stn, R3805U-Wh, R3802U-Bk, R3835U-Pc/wh, & R3832U-Pc/bk)

The D'Lux Pullout Kitchen Faucet, models R3830U-APC, R3810U-STN, R3805U-WH, R3802U-BK, R3835U-PC/WH, and R3832U-PC/BK, is a single lever kitchen faucet designed for use by individuals with grasping, upper extremity, or mobility disabilities. This faucet has an ergonomic loop handle and the end of its spout can be pulled out on a stainless steel coil. Other features include a ceramic disc cartridge, a hard water resistant soft touch elastomer spray face and anti-scald device, dissimilar ceramic d

D.I.Y. Adult Johnny Jumper

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: This DIY device helps a disabled individual participate in recreational activities such as dancing and exercise. Innertube material, harnesses, and a ceiling attachment rod make up the Adult Johnny Jumper. COMMENTS: The Adult Johnny Jumper is designed to accommodate those with disabilities who normally wouldn't be able to dance or exercise independently. SKILLS REQUIRED: Construction (fine motor). AUTHOR: Unspecified. TITLE: Adult Johnny Jumper. REF: I

D.I.Y. Lamp Switch For Dogs

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: This DIY product is specially designed for people who use trained service dogs to help them in daily life. The problem was that the service dog could not push the button very well, therefore this lever system was the solution. Another advantage of this specific product is that it can be used by service dogs, people who use a wheelchairs and older people. MATERIALS USED: Strong wooden plates (we used multiplex) thickness: 6millimeter; surface: 1x 450mil

D.I.Y. Ooglies

***Do It Yourself*** OOglie adaptation allows children with limited fine motor, grasping and motor control due to cerebral palsy, traumatic brain injury and/or illnesses activate mechanical toys and watch it move and light up. Materials: Any OOglie with a 3x 3.5 millimeters headphone socket; thin wire (e.g 7strand 0.2 millimeters). A Soldering iron (15 to 30 Watt power). Thin solder. Soldering flux. Desoldering braid. Cordless drill with drill bit 6 (1/4"); knife or wire strippers; small screwdr

D.I.Y. Toy Bar/Gym

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: To allow children with cortical blindness MATERIALS USED: 2 right angles, 3 opening 1 inch diameter “T” connectors, 4 right angles, 2 opening 1 inch diameter “elbow” connectors, 4 right angles, 3 opening 1 inch diameter “corner” connectors, Nine 2 foot long pieces of 1 inch diameter PVC piping**, Four 1 foot long pieces of 1 inch diameter PVC piping**, Elastic bands (typical white elastic bands, found at fabric and arts & crafts stores), Toy rings,

Dadc 500 Manual Push Pull

The DADC 500 Manual Push Pull is a hand control designed for use by individuals with mobility disabilities, spinal cord injury, or upper extremity disabilities, including limited range of motion. It is designed for drivers who like the traditional push/pull handle. The user pulls the handle to control the accelerator and pushes it to apply the brakes. The DADC 500 Manual Push Pull features quick, light action and smooth response to the user's motions. It fits a wide range of vehicles with little

Dadc 500 Manual Push Rock

The DADC 500 Manual Push Rock is a hand control designed for use by individuals with mobility disabilities, spinal cord injury, or upper or lower extremity disabilities, including limited range of motion. Designed for drivers who want a higher hand position on the steering wheel, the DADC 500 Manual Push Rock features a vertical handle and provides a quick, light action and smooth response to the user's motions. The user pulls (or rocks) the vertical handle back to control the accelerator and pu

Dadc 500 Push Pull Hand Control

The DADC 500 Push Pull is a hand control designed for use by individuals with mobility disabilities, spinal cord injury, or upper extremity disabilities, including limited range of motion or hand strength. The user pulls the handle to control the accelerator and pushes it to apply the brakes. Designed for drivers who like the traditional push/pull handle, the DADC 500 Push Pull is vacuum assisted and requires only a light touch to operate. The full range of motion from idle to full throttle is l

Dadc 500 Twist

The DADC 500 Twist is a hand control designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury, including people with limited range of motion. This power assisted hand control has a handle that is twisted gently for gas and a lever that is pushed for brakes. The DADC 500 Twist is intended for drivers who want ease of operation and precise, fingertip control. Its vacuum-assisted, motorcycle-style handle enables full throttle in one quarter turn of the wri

Dadc Brake Only

The DADC Brake Only is a hand control designed for use by individuals with mobility disabilities, spinal cord injury, upper or lower extremity disabilities, including limited range of motion or use of only one leg, or drivers who can operate the pedals, but are challenged with the transition from gas to brake. The user pushes the control's handle to apply the brakes. It does not connect to the accelerator. The DADC 500 Brake Only provides a quick, light action and a smooth response. It fits a wi

Dadc Game Wheel

The DADC Game Wheel is a modified game controller designed for people with fine motor or upper or lower extremity disabilities, or spinal cord injury that prevent them from using a joystick or pedal control. This controller consists of a steering wheel controller for games involving racing or driving, and a hand control lever extending from the base of the unit to control acceleration and braking functions.

Dado Express Pocket Door

The Dad0 Express Pocket Door is a motorized space saving door designed for use by individuals with mobility or severe disabilities or spinal cord injury. This modernized pocket door uses tempered Starphire glass and features a patented motorized system with advanced motion control. The glass door lies flush with any finished wall. The system features a pre-fabricated pocket door frame, a precision silent track, micro-processor controlled operation, and glass touch panels. Using a sensor, a maste

Daessy Accessible Workstation - Double Surface Table

The Daessy Accessible Workstation - Double Surface Table is a height adjustable computer desk designed for use by individuals with mobility disabilities or spinal cord injury. This workstation has two independently height- adjustable surfaces with clear access underneath for a user seated in a wheelchair. The frame is made from welded, plastic-coated tubular steel, and the table surface is made from arborite laminated MDF board. OPTIONS: CPU bracket, double locking casters, front surface tilt an

Daessy Accessible Workstation - Single Surface Table

The Daessy Accessible Workstation - Single Surface Table is a height-adjustable computer desk designed for use by individuals with mobility disabilities, spinal cord injury, or low vision. The height-adjustable work surface makes this table accessible to a user seated in a wheelchair, while an optional keyboard surface allows users with low vision closer access to a monitor located on the main surface. The frame is made from welded, plastic-coated tubular steel, and the table surface is made fro

Daessy Desktop Mount (Model Ddm-1)

The Daessy Desktop Mount, model DDM-1, is a mounting clamp designed to hold a communication device for individuals who have physical disabilities and use a communication device. The desktop mount provides a stable, hands-free support for any flat surface. It is ideal for individuals who have limited upper limb mobility. The stand comes with the Quick Release Mount, which holds the device firmly yet allows you to remove it with just a flip of a lever.

Daessy Mini Adjustable Mount (Model M75-Am)

The DAESSY Mini Adjustable Mount, model M75-AM, is a stand for a tablet computer and a computer mounting kit for wheelchair designed for use by individuals with use of only one hand, or mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The system has several points of adjustment to set up and position the mount. Two rotating joints can be angled and twisted in various directions to adjust the horizontal tube position. The system is supported on the wheelchair by a

Daessy Mini Bent-Tube Mount (Model M75-Btm)

The DAESSY Mini Bent-Tube Mount, model M75-BTM, is a stand for a tablet computer, switch mounting hardware and a computer and communicator mounting kit for wheelchair designed for use by individuals with use of only one hand, or mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The mount is non-directional and can be installed on either side of the wheelchair. This product also can be removed from the wheelchair when not needed. The frame clamp assembly includes a

Daessy Mini Folding Mount (Model M75-Fm)

The DAESSY Mini Folding Mount, model M75-FM, is a stand for a tablet computer, switch mounting hardware and a computer and communicator mounting kit for wheelchair designed for use by individuals with use of only one hand, or mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The mount is non-directional and can be installed on either side of the wheelchair. The system folds the horizontal tube down to the outside. The folding joint between the two mount tubes brin

Daily Care Kit, Model 6638

Daily Care Kit provides people of all ages with products they need for activities of daily living. Designed for people with limited range of motion, arthritis, poor grasp and more. Handle can be bent with heat gun for desired angle.

Daily Living Reporting System (Adlrs)

The Daily Living Reporting System (ADLRS) is utilized to monitor task-oriented behavior of individuals who are at risk for injuries in their homes due to disabilities. The ADLRS utilizes a system of unobtrusive electronic sensors, microprocessors, and wireless technologies to record, track, store, and analyze key functional behaviors, and then post the information to a PIN-protected secure website. The system is able to record the individual’s movement and interactions with objects in the envir

Daily-Weigh Scale (Model Sr255)

The Daily-Weigh Scale, model SR255, is a digital hydraulic lift scale designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. The scale has a wheeled base, a hydraulic lifting mechanism, and a tray on which the person to be weighed lies. Weight readings are displayed in pounds or kilograms on a 16-character liquid crystal digital display (LCD). The unit also has auto power shut down. POWER: Uses six D cell alkaline batteries and is equipped with a low

Dalton 3 Wheel Scooter (Model Sc-S135)

The Dalton 3 Wheel Scooter, model SC-S135, is a scooter designed for use by individuals with mobility disabilities. FRAME: Red or blue ABS plastic body with a chrome steel bumper that also functions as lift handle. CONTROLS: Dynamic DL Rhino controller and adjustable-height tiller. RWD: Rear wheel drive with high torque drive train. SEAT: Padded seat with headrest. ARMRESTS: Flip-up armrests with height, width, and angle adjustments. BRAKES: Intelligent regenerative electromagnetic brakes. WHEEL

Dance Beat Drum (Model 4412)

The Dance Beat Drum, model 4412, is a sensory integration activity designed for children with physical, cognitive, neurological, and visual disabilities. This see-through drum has lights, three large buttons with musical symbols to select three rhythmic modes, a switch to select from four different activity modes, and an on/off switch. In "drum" mode, children can tap out any rhythm and watch as fascinating light patterns appear on the top of the toy. In "funny" mode, Dance Beat Drum makes six r

Danika Vest

The Danika Vest is a women’s vest designed for use by women who use wheelchairs or who have difficulty dressing. This sleeveless cardigan vest features a halter neckline and razorback details giving the top oversized arm holes that make it easy to put on or take off, and front snaps that allow the vest to be worn open or closed. When worn closed, the vest gives the appearance a v-neckline and the cardigan drapes across the body for a slimmer look. This vest also has a large back opening for eas

Davis Suspension Forks

Shock absorbing suspension caster fork for wheelchairs. For semipneumatic and pneumatic caster tires. Fits most wheelchairs. Fork sandwiched with additional plate, fastened by bolt with spring to absorb vibrations.

Day Cruiser Mini Pack

The Day Cruiser Mini Pack is a wheelchair side or legrest pouch designed for use by individuals with mobility disabilities or spinal cord injury. Made from water-resistant heavy-duty Cordura with a full lining, this pack attaches to the armrest or legrest of a wheelchair with two Velcro straps, which are sewn on the back of the unit. It can also be worn around the user's neck. The pack has two compartments, an adjustable neck strap, and a sewn-on elastic loop on the side to carry glasses or a pe

Day Cruiser Wheelchair Bag

The Day Cruiser Wheelchair Bag is a wheelchair back pouch designed for use by individuals with mobility disabilities or spinal cord injury. Made from water resistant heavy-duty Cordura with a full lining, this backpack attaches to most wheelchairs with or without push handles with two adjustable straps. The backpack has two compartments, a large main area with Velcro flap closure and an expandable zippered front pocket for smaller items. Power chair users must have handles to attach the bag. DIM

Daytona 3 (Models S35005 & S35006)

The Daytona 3 is a three-wheeled powered scooter designed for use by individuals with mobility disabilities. FRAME (LxW): 44.4 x 22.5 inches. This scooter disassembles into three pieces for transport. The frame is available in red (model S35005) or blue (model S35006)and includes anti- tippers and a headlight. The scooter has a 40.2- degree turning radius, a climbing angle of 8 degrees, and ground clearance of 2.5 inches. CONTROLS: Adjustable tiller and "Finger-Pull" throttle. SEAT: Contoured he

Daytona 3 Gt (Models S35005Gt & S35006Gt)

The Daytona 3 GT, models S35005GT and S35006GT, is a three-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 47.4 x 22.8 x 40 inches. The ground clearance is 2.5 inches, and the turning radius is 40.2 inches. The unit includes rear anti-tip wheels, a headlight, a tail light, a front large carry basket, and a front bumper. The scooter can be disa

Daytona 4 (Models S45001 & S45002)

The Daytona 4 is a four-wheeleed scooter designed for use by individuals with mobility disabilities. FRAME (LxW): 49 x 22.5 inches. The frame is available in red (model S45001) or blue (model S45002). This scooter is equipped with anti-tippers, headlights, and a large carrying basket. The scooter has a 64-inch turning radius, an 8-inch safe climbing angle, and 3-inch ground clearance, and it disassembles for transport. CONTROLS: Adjustable tiller and "Finger-Pull" throttle. SEAT: Contoured swiv

Daytona 4 Gt (Models S4501Gt & S4502Gt)

The Daytona 4 GT, models S45001GT and S45002GT, is a four-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 49.6 x 22.8 x 44 inches. The ground clearance is 3 inches, and the turning radius is 64 inches. This scooter includes rear anti-tip wheels, two headlights, a tail light, a front large carry basket, and a front bumper. It has anti-tippers.

Debug Beach Wheelchair

The DeBug Beach Wheelchair is an attendant-propelled beach wheelchair designed for use by individuals with mobility disabilities. FRAME: High-grade 316L stainless steel tubing. An articulating rear suspension system and push handles are included. The chair comes standard with a high-gloss, stainless steel finish. Custom powder-coat colors are available. Optional quick-release pins for disassembling the chair without tools are available. The chair is 33.5 inches wide with the standard wheels and

Decorative Adjustable Canes

The Decorative Adjustable Canes are adjustable straight canes designed for use by individuals with walking or balance disabilities. These canes have decorative shafts and wooden handles. DIMENSIONS: Height is adjustable from 30 inches to 39 inches. The shaft diameter is 7/8 inch. CAPACITY: 250 pounds. COLOR: The patterns on the cane shafts are available in small or large flower bouquet, blue and pink or lilac and green leaves, aloha, and pink or maui flowers.

Decpac Multipurpose Ramp (Model Mp44)

The Decpac Multipurpose Ramp, model MP44, is a portable ramp designed for use to provide access to vans or steps for individuals with mobility or lower extremity disabilities or spinal cord injury. This four-panel folding ramp can be used for a rise up to 13 inches over steps at home or to enter the side of a minivan. When folded it can fit into a van and slide under a seat. The ramp is constructed from laminated fiberglass. The top surface has a textured non-slip tread and the edges are marked

Decpac Multipurpose Ramp (Model Mp55)

The Decpac Multipurpose Ramp, model MP55, is a portable ramp designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. It can be used as a temporary wheelchair ramp in a rented home or in a building that does not have homes, such as one that has historical significance. The ramp can accommodate a rise of up to 16 inches. It is made from laminated fiberglass. The top surface has a textured non-slip tread and the edges are marked with a caution stripe. Th

Decpac Multipurpose Ramp (Model Mp66)

The Decpac Multipurpose Ramp, model MP66,is a portable ramp designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. It can be used for a rise of up to 20 inches. It has four laminated fiberglass panels that are secured with a hook and loop strap when folded. The top surface has a textured non-slip tread and the edges are marked with a caution stripe. The top edge is indicated with a label and has a thick, grooved rubber pad to hold at the edge of the

Decpac Multipurpose Ramp With Edge Barrier (Model Mpeb44 )

The Decpac Multipurpose Ramp with Edge Barrier, model MPEB44, is a ramp designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. It is a four-panel folding ramp with side barriers to help keep a wheelchair, scooter or stroller on the ramp. This ramp can be used for entryways with steps or to enter or exit a minivan on the side. The ramp can be used for a rise up to 13 inches. When folded the ramp can fit in a van and slide under a seat. The ramp is mad

Decpac Multipurpose Ramp With Edge Barrier (Model Mpeb55)

The Decpac Multipurpose Ramp with Edge Barrier, model MPEB55, is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This collapsible four panel ramp can fit a rise of up to 16 inches. It fits in the side of a minivan, but when folded is compact enough to store under the seat of the van. Constructed from laminated fiberglass. its top surface has a textured non-slip tread and the edges are marked with a caution stripe. The top edge

Decpac Multipurpose Ramp With Edge Barrier (Model Mpeb66)

The Decpac Multipurpose Ramp with Edge Barrier, model MPEB66, is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This ramp can accommodate a rise of up to 20 inches, and it can be used for van access. Constructed from laminated fiberglass, its top surface has a textured non-slip tread and the edges are marked with a red caution stripe. Edge barriers are included for safety. The top edge is indicated with a label and it has a th

Decpac Personal Mini Ramp (Model Mp24)

The Decpac Personal Mini Ramp, model MP24, is a portable curb or threshold ramp designed for use by individuals with mobility disabilities. The ramp is small enough to carry in a bag on a wheelchair and can be stored in a vehicle or at home. The ramp is made from laminated fiberglass. The top surface has a textured non-slip tread and the edges are marked with a caution stripe. The top edge is indicated with a label and has a thick, grooved rubber pad to hold at the edge of the step. The rubber g

Decpac Personal Standard Ramp (Model Mp210)

The Decpac Personal Standard Ramp, model MP210, is a portable curb or threshold ramp designed for use by individuals with mobility disabilities. This ramp can be used to navigate over curbs or thresholds with a rise of up to 9 inches, and it is small enough to be carried in a bag on a wheelchair. The ramp is constructed from laminated fiberglass. The top surface has a textured non-slip tread, and the edges are marked with a caution stripe. The top edge is indicated with a label and has a thick,

Deep Penetrating Infrared Lifght (Dpl)

This Deep-Penetrating Infrared Light (DPL) is designed for individuals with arthritis or fibromyalgia or any disability which causes poor circulation or tight muscles and/or achy joints. Stimulates cellular regeneration and activates endorphins which block pain-transmitting chemicals or nerves. Can replenish skin cells and stimulate the formation of elastin, a regenerating protein, and collagen, a structural protein/connective tissue. Not intended to diagnosed, treat, curve, or prevent any disea

Deep U Headrest (Model Duhr100)

The Deep U Headrest, model DUHR100, is a wheelchair headrest designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs who need to keep their heads positioned upright and centered. DIMENSIONS: 11 x 5 inches.

Defender Ii

The Defender II is an air wheelchair cushion system designed for use by individuals who do not currently have pressure sores. The cushion's multiple air cells are divided into two zones to provide pressure relief at the boney areas of the posterior. The cushion is made of soft, durable neoprene (latex free), and comes with a machine washable, breathable cover. Each air cell is reinforced with an internal air bladder for additional durability and a foam insert to prevent bottoming out. The manu

Delta Folding Walker (Model 4100)

The Delta Folding Walker 4100 is a height adjustable, tri-wheeled walker with hand brakes. A special mechanism assures that the bracing hinge automatically locks into a stable, rigid position when the frame is unfolded. The triangular frame consists of two sections that fold flat for transport and storage. DIMENSIONS: Height range is adjustable from 30 to 36 inches.

Delta Ultra Light 1000 Full-Electric Bed (Model 15033)

The Delta Ultra Light 1000 Full-Electric Bed, model 15033, is a motorized bed designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. This bed can be raised and lowered at three independent points, the head, knee and foot, and the entire bed can be raised and lowered to facilitate transfer. The headboards and footboards are interchangeable with Drive's and some other manufacturers bed ends. FRAME: The frame includes woodgrain head- and footboards and

Delta Ultra Light 1000 Full-Electric Low Bed (Model 15035)

The Delta Ultra Light 1000 Full-Electric Low Bed, model 15035, is a motorized bed designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. This bed can be raised and lowered at three independent points, the head, knee and foot, and the entire bed can be raised and lowered to facilitate transfer. The headboards and footboards are interchangeable with Drive's and some other manufacturers bed ends. FRAME: The frame includes woodgrain head- and footboards

Delta Ultra Light 1000 Semi-Electric Bed (Model 15030)

The Delta Ultra Light 1000 Semi-Electric Bed, model 15030, is a motorized bed designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. This bed can be raised and lowered at three independent points, the head, knee and foot, and the entire bed can be raised and lowered to facilitate transfer. The headboards and footboards are interchangeable with Drive's and some other manufacturers bed ends. FRAME: The frame includes woodgrain head- and footboards and

Deluxe Adjustable Bath Bench With Red Safety Handle (Models 9100 & 9120)

The Deluxe Adjustable Bath Bench With Red Handle is a bath seat designed for use by individuals with mobility, balance, and cognitive disabilities who have difficulty standing in a tub or shower. Available with or without a contoured back which slides into seat, the bench has a hard plastic seat and back with multiple drainage holes. The safety handle provides support and balance assistance when entering and exiting the tub. The handle can be attached to eaither side and additional handles can b

Deluxe Bariatric Commode (Model 16B306A)

The Deluxe Bariatric Commode, model 16B306A, is designed for use by individuals with mobility disabilities. The welded frame of this commode is constructed of one-inch steel tubing that is zinc plated and powder coated for durability. Features include an extra-large seat, complete pail, and the ability to fit over most toilets. DIMENSIONS (LxW): 18.5 x 27.75 inches. The height under the seat adjusts from 17.5 to 21.5 inches; the seat height is 22 inches. The width between the arms is 25.5 inches

Deluxe Bath Safety Mat (Models B3416B & B3416C)

The Deluxe Bath Safety Mat is a bathtub mat designed to prevent slipping for people with balance, mobility, or lower extremity disabilities. Extra large for complete coverage, suction cups over the bottom surface anchor the mat to the tub or shower floor. DIMENSIONS (WxL):16 x 41.25 inches. COLOR: Model B3416B is blue and model B3416C is cream.

Deluxe Child Wheeled Walker (Model 1763)

The Deluxe Child Wheeled Walker, model 1763, is a multi-purpose designed for use by children two to eight years old with mobility disabilities. This walker can be used in a walking or seated position. Features include a padded body ring that opens in the rear for easy entry and exit. The entire unit disassembles for transport and storage. DIMENSIONS: Height adjustable from 15 to 23 inches. The removable saddle seat adjusts from 10 to 18 inches from the floor. The inside diameter is 9.5 inches, a

Deluxe Commode

The Deluxe Commode is a height-adjustable commode designed for use by individuals with severe physical disabilities. The removable back allows for placement over the toilet for use as a raised toilet seat or safety frame. This commode is equipped with padded armrests, skid-resistant rubber tips, a removable commode bucket with lid and a splash guard. The pail capacity is nine quarts. DIMENSIONS (HxDxW): 28.5 x 21.75 x 23.5 inches. The width between the arms is 19.75 inches. The seat height adjus

Deluxe Convalescent Recliner

The Deluxe Convalescent Recliner is a recliner chair designed for use by individuals who require support while sitting. This chair can be adjusted and locked in three positions: upright, with the footrest elevated, and fully reclined. It has a high back headrest, padded arms, and oversized casters. The large, molded plastic tray attaches to the arms, slide ajusts, and can be stored on the chair back. The cushions are covered in mildew resistant vinyl. A built-in moisture barrier prevents seepage

Deluxe Down-Under (Model Wh175) & Junior Down-Under (Model Wh175J)

The Deluxe Down-Under WH175 and the Junior Down-Under WH175J are removable under seat pockets designed for use by wheelchairs users. The bags have one main compartment and an additional outside pocket suitable for carrying a checkbook, wallet, small book, wheelchair tools etc. The pockets have zip closures with large pull rings. The Junior Down- Under is sized for small chairs. DIMENSIONS (WxHxD): Deluxe Down-Under - 11x7x3 inches; Junior Down-Under is 9x7x3 inches. COLOR: All black or black wit

Deluxe Dressing Stick (Models A69820 & A6983)

The Deluxe Dressing Stick, models A69820 and A6983, is a dressing aid designed for use by individuals with grasping, upper extremity or mobility disabilities, spinal cord injury, arthritis or reaching difficulties. This device is intended to assist with putting on and removing clothing. It can also be use to push and pull objects. This dressing stick is comprised of a wooden dowel with reinforced hook at one end. DIMENSIONS (L): 19 inches (model A69820) or 26 inches (A6983); the dowell has a dia

Deluxe Durawalker (Model 1100)

The Deluxe Durawalker, model 1100, is an adjustable height wheeled walker with seat. The walker has a furniture-grade PVC tubular frame with a front stabilizer bar. A personal property pocket is included. DIMENSIONS (HxLxW): 40 x 42 x 25 inches. WEIGHT: 33 inches. COLOR: Frame is white. Cushion fabrics are available in a variety of colors.

Deluxe Fly-Weight Aluminum Transport Chair (Fw17 & Fw19 Series)

The Deluxe Fly-Weight Aluminum Transport Chair, FW17 and FW19 series, is a folding transport wheelchair designed for use by individuals with lower extremity, mobility, or walking disabilities. FRAME (LxWxH): 33 x 20 x 36 inches (FW17 series) or 33 x 22 x 37.25 inches (FW19 series). The folded width is 9 inches for both series. Aluminum frame is available in blue, green, black, or silver. SEAT (WxD): 17 x 16 inches (FW17) or 19 x 16 (FW19). Back height is 18 inches; and the seat-to-floor height i

Deluxe Folding Personal Worktable

The Deluxe Folding Personal Worktable is a height adjustable tilt top worktable designed for use by individuals who use wheelchairs. This table is height- and tilt-adjustable and hand knobs adjust and secure its telescoping legs. The top tilts from 0 to 45 degrees. The scratch-resistant melamine top has a half-moon cutout for accessibility and an outer rim to protect against spills. The table folds flat for storage. DIMENSIONS: Table height adjusts from 29 to 44 inches. The tabletop measures

Deluxe Folding Walker (Models 2130, 2135, Dme 17)

Folding adjustable height walker. Anodized aluminum tubing with angled front legs for security, double tube cross brace with epoxy coating, side leg safety braces. Over toilet design. Height adjusts in 1 inch increments. Dual safety release pins allow each side to be folded independently, activated by depressing knob at top of safety release pin and pulling toward front brace. Folds flat. Adult size: Adjustable height 32 to 36 inches, width at base 24 inches, width between grips 16 1/2 inches, d

Deluxe Folding Walker (Models W200, W200Bw, & W200Bf)

The Deluxe Folding Walker, model W200, is a folding, height-adjustable walker designed for use by individuals with mobility or walking disabilities. The folding, anodized aluminum frame has a reinforced dual steel crossbrace and a single button one-hand release folding mechanism. Models W200BW and W200BF have front wheels and both wheeled models include rear glide brakes. DIMENSIONS (HxDxW): 30.5 to 35.5 x 17.5 x 23 inches. Folded dimensions are 30.5 to 35.5 x 3.5 x 23 inches. The width between

Deluxe Folding Walker, Two Button V-Brace (Models 10200Dx-2 & 10201Dx-2)

The Deluxe Folding Two Button Walker with V-Brace is a folding height-adjustable walker designed for use by individuals with walking or balance disabilities. The walker is constructed of one-inch anodized, extruded aluminum. SIZES: Junior and adult. DIMENSIONS (HxW): 32 to 39 x 23 inches (model 10200DX-2) or 25 to 32 x 23 inches (model 10201DX-2). CAPACITY: 375 pounds. WEIGHT: 6.5 pounds (10200DX-2) or 6.3 pounds (10201DX-2).WARRANTY: Limited lifetime warranty.

Deluxe Four-Wheel Rollator Walker

The Four-Wheel Rollator Walker is a folding wheeled walker designed for use by individuals with mobility disabilities. This walker features a lightweight folding frame, a padded seat and backrest, foam-covered handgrips, loop hand brakes, swivel front wheels, and locking rear wheels. An included removable tote basket fits under the seat and has a carrying handle. DIMENSIONS: The front wheels are five inches in diameter and the back wheels are four inches in diameter. The walker is 23 inches wide

Deluxe Gopher

The Deluxe Gopher is a folding reacher designed for use by individuals with mobility or upper extremity disabilities. This folding reacher has trigger activation with a lock to hold items in the jaws. The jaws are equipped with suction cup grips and can lift up to five pounds. The device is aluminum with a plastic handle. DIMENSIONS: 33 inches long.

Deluxe Grab Bar

The Deluxe Grab Bar is a decorative wall-mounted grab bar designed for use by individuals with balance or mobility disabilities or spinal cord injury. The bar attaches to the wall at two points, with round, square, or diamond-shaped flanges at the points of attachment. DIMENSIONS: 12, 16, 18, 24, 32, or 36 inches long. The round flanges are 3 inches in diameter; the square flanges are 3 x 3 inches, and the diamond-shaped flanges are 4.25 inches. COLOR: Available finishes include antique brass, p

Deluxe Grab Bars (Models H212, H216, H218, H224, H232, H232L, & H232R)

The Deluxe Grab Bars are grab bars designed for use by individuals with balance and mobility disabilities. All models are made of chrome-plated steel. The mounts are coated with soft plastic brushing. Models H232L and H232R are 90- degree angle grab bars and are available with a left or right mounting. DIMENSIONS: Model H212 is 12 x 4.75 inches; model H216 is 16 x 4.75 inches; model H218 is 18 x 4.75 inches; model H224 is 24 x 4.75 inches; model H232 is 32 x 4.75 inches; model H232L is 32 x 4.5

Deluxe Hand-Held Shower (Model A830004)

The Deluxe Hand-Held Shower, model A830004, is a handshower with a flexible hose designed for use by individuals who shower or bathe while seated. The flexible metal hose attaches to the existing wall-mounted shower head and the handshower provides fingertip, push-button control of the water flow. Two chrome-plated, adhesive wall mounts are included for height-adjustable storage or hands-free use. DIMENSIONS: Hose is 84 inches long and 0.5 inches in diameter.

Deluxe Handheld Shower Massager (Model 556914)

The Deluxe Handheld Shower Massager, model 556914, is a handshower with flexible hose designed for use by individuals with spinal cord injury or mobility or balance disabilities. The unit features an adjustable massaging head with three spray options, a chrome/mylar-reinforced hose, and a chrome shower arm mount. DIMENSIONS: The hose is 84 inches long.

Deluxe Occupancy Control

The Deluxe Occupancy Control is a wandering patient system designed for use by individuals who are at risk for falls when leaving a bed, chair, or wheelchair without assistance. The system utilizes a control unit and a pressure-sensitive chair pad or bed pad to monitor when the individual rises without assistance, causing an alarm to sound. Features include five alarm sounds, adjustable alarm delay, automatic alarm reset, nurse-call interface, and system status light. POWER: Uses batteries; the

Deluxe Padded Bathtub Transfer Bench With Full Seat

The Deluxe Padded Bathtub Transfer Bench with Full Seat is a transfer bench designed for use by individuals with mobility and balance disabilities. The height-adjustable padded vinyl seat resists tearing. The seat is equipped with a side rail to provide support during transfers. DIMENSIONS (HxDxW): 31 x 22 x 29 inches to top of back. The height adjusts from 18 to 22 inches in 0.75-inch increments. CAPACITY: 300 pounds. WEIGHT: 13 pounds, 4 ounces. COLOR: White.

Deluxe Pediatric Shower / Commode Chair (Model 350)

The Deluxe Pediatric Shower/Commode Chair, model 350, is a child caster shower commode designed for use by children with physical disabilities. Constructed of durable, furniture-grade PVC tubing shaped to eliminate sharp corners, the commode features a hinged seat with four interlocking seat supports, a wide wheel-base, a removable back made of vinyl coated polyester mesh, a detachable 7.5 quart pail, a footrest, and a safety belt. OPTIONS: Privacy skirt; open front toilet seat; removable padded

Deluxe Plastic Toilet Seat Riser

The Deluxe Plastic Toilet Seat Riser is an elevated toilet seat designed for use by individuals with balance, lower extremity or mobility disabilities. This contoured seat elevates the toilet by 5 inches and fits most standard size toilet bowls. It is made of unbreakable polyethylene molding and comes with four slip-resistant pads that adhere to the underside of the toilet seat. The unit is completely portable and can be assembled without tools. DIMENSIONS (HxLxW): 5 x 15 x 14.5 inches. CAPACIT

Deluxe Pontoon Style Bed Pan

The Deluxe Pontoon Style Bed Pan is designed for use by individuals with severe physical or mobility disabilities. Made of strong polypropylene, this bed pan is easy to clean and contoured for comfort.

Deluxe Prism Glasses (Model A18002)

Deluxe Prism Glasses, model A18002, are prism glasses designed for use by individuals with severe physical disabilities or spinal cord injury. The prism allows the user to see at a 90 degree angle, enabling the user to read in bed or watch TV while lying flat. A propped-up book can be read while the user's head is flat on a pillow. The glasses can also be used for reading during an MRI scan. The streamlined frame fits over regular glasses. These glasses are latex free and come with a protective

Deluxe Pt Walker (Model 2116)

Walker, adjustable height. Over toilet design allows use as temporary toilet safety frame. High front cross bar does not interfere with stride. Aircraft rivets. Available in polished or anodized aluminum tubing. Adjustable height 25 1/2 to 35 1/2 inches, width 23 1/2 inches, depth 19 1/2 inches. Weight 4 pounds. rubber leg tips and handgrips.

Deluxe Raised Toilet Seat (Models 1632, 1634, 1636, 1682, & 1684)

The Deluxe Raised Toilet Seat is an elevated toilet seat designed for use by individuals with balance or mobility disabilities. The contoured seat distributes the user’s weight over a wide area to help hold the user in position. A wide frontal opening allows easy access for personal cleaning. The seat is made with one piece polyethylene molding, and is available with or without a lid. The lid has a high gloss finish. Three L-shaped stainless steel clamps are included for fitting to the toilet. D

Deluxe Reversible Extenda Arm (Model 31094)

The Deluxe Reversible Extenda Arm, Model 31094, is lapboard mounting hardware designed for use with wheelchairs. The tubulat steel telescoping arm mounts under the armrest on standard padded or desk-length wheelchair arms to provide up to 8.5 inches of additional support for trays in front of the armrest. The device can also br retracted under the armrest overhang. This deluxe heavy duty version is reversible for use on the right or left side. WARRANTY: The manufacturer warrants this product to

Deluxe Side Walker (Model 2600)

Folding hemi walker, adjustable height. Provides more support than quad cane, but less support than a walker. Heavy wall anodized aluminum tubing, secured by aircraft type rivets. Tubular link folding mechanism for pinch free opening and closing. Nonskid reinforced rubber tips and handgrips. Adjustable height 30 1/4 to 34 1/4 inches.

Deluxe Steer & Stroll Trike

The Deluxe Steer & Stroll Tricycle is a child's tricycle designed for use by children with lower extremity or mobility disabilities. Designed for children two to five years of age, this tricycle has a rear push handle and an internal geared steering feature that enables an adult to turn the front wheel with push handle. Freewheeling pedals allow the rider to coast while an adult pushes. When the stroller-style handle is no longer required, it can be removed. Other features include an oversi

Deluxe Transfer Bench With Back (Model 9070)

The Deluxe Transfer Bench with Back, model 9070, is designed for use by individuals with mobility disabilities, balance disabilities and cognitive disabilities who have difficulty standing in a tub or shower. The bench extends over the side of the tub, allowing the individual to sit and slide into the tub without having to step over the side. The bench has an anodized aluminum frame with a hard plastic seat and back. It adjusts to left- or right-side tub entry by placing the back on either side.

Deluxe Transfer Board (Models Nc94205 & Nc94205-B)

The Deluxe Transfer Board, models NC94205 and NC94205-B, is designed to assist people who use wheelchairs. The Deluxe Transfer Board (NC94205) is made from 0.5-inch thick birch and tapers at both ends for transfers. The Bariatric Transfer Board (NC94205-B) features two hand holes and a heavy duty 9 ply birch wood base with 3 additonal piles form-laminate on top. CAPACITY: 450 pounds for NC94205 and 650 pounds for NC94205-B. DIMENSIONS (WxL): 8 x 24 inches for NC94205 and 10 x 32 inches for NC942

Deluxe Trigger Release Folding Walker (Models 10224-2, 10224Gy-2, 10225-2, & 10225Gy-2)

The Deluxe Trigger Release Folding Walker is a height-adjustable folding walker designed for use by individuals with walking or balance disabilities. It features trigger release levers enabling the user to fold the walker without letting go of the handles. SIZES: Junior and adult. DIMENSIONS (HxLxW): 32 to 38 x 18 x 24 inches (models 10224-2 and 10224GY-2), 25 to 32 x 18 x 24 inches (models 10225-2 and 10225GY-2). CAPACITY: 300 pounds. WEIGHT: 6 pounds (models 10225-2 and 10225GY-2) or 6.5 poun

Deluxe Ups Walker (Model 2105)

Walker, adjustable height. Heavy wall anodized aluminum tubing, secured with aircraft rivets. Nonskid reinforced rubber tips, rubber handgrips. Adult size: adjustable height 32 to 36 inches, width 23 inches, depth 20 1/2 inches. Youth size: adjustable height 28 to 32 inches, width 22 inches, depth 19 inches. Weight 4 pounds.

Deluxe Walker Basket With Stabilizing Bars

The Deluxe Walker Basket with Stabilizing Bars is a wire basket for walkers designed for use by individuals with mobility disabilities. This plastic-coated wire basket hooks over the walker's center bar and a stabilizer strip extends from each side of the basket to the upright to prevent the basket from swinging. The basket also features a heavy-duty clear plastic liner tray with one large compartment, a coin or medication holder, and a cup or can holder. DIMENSIONS: 5.5 x 16 x 7 inches.

Deluxe Wall-Mounted Folding Parallel Bars (Model 920960)

The Wall-Mounted Folding Parallel Bars, model 920960, are designed for use with individuals with mobility disabilities. These parallel bars are mounted to the wall and the floor and fold against the wall when not in use. Floor plates are permanently attached to the flooor. The bars have wooden handrails. DIMENSIONS: The bars are 7 feet long. The height adjusts from 26 to 39 inches and the width between rails is 24 inches. CAPACITY: 250 pounds

Deluxe Wheelchair Mac with Sleeves

eluxe Wheelchair Mac (raincoat) with Sleeves is designed to provide protection of the elements for individuals who use a wheelchair for mobility. It has a seam sealed for waterproofing. The knitted cuffs are covered by the ends of the sleeves, to prevent the fabric from getting wet. Vents at the rear of the raincoat allow use of the wheelchair’s pushing handles and a small pouch at the front provides handy storage. 

Deluxe Wheelchair Tray (Models H1200 & H1201)

The Deluxe Wheelchair Tray is a lapboard designed for use by individuals who use wheelchairs. The wooden tray features extra-wide, screwed-in straps for attaching the tray to the wheelchair armrests, a rounded torso cutout, and a raised lip to prevent items from falling off. DIMENSIONS (WxD): 25 x 22 inches. COLOR: Model H1200 is butternut and model H1201 is rosewood.

Deluxe Wood Transfer Board

The Deluxe Wood Transfer Board is designed for use in transfers to and from wheelchairs. This solid hardwood board has tapered ends and is urethane coated, sealed, and polished for smoothness. The board has a cut-out handle for gripping and carrying. DIMENSIONS (LxW): 30 x 8 inches. CAPACITY: 250 pounds.

Denim 30-Inch Skirt (Model 030)

The Denim 30-Inch Skirt, model 030, is a women’s skirt desired for use by individuals with mobility disabilities, incontinence, or who have difficulty in dressing. Available lined or unlined, this stretch denim skirt is designed for ease in sitting as the front is made with less bulk of fabric making for a longer back and higher back waist. Features include a 4-inch invisible zipper to accommodate catheter tubing should the wearer choose to wear catheter accessories outside of clothing. The zipp

Denim Jeans (Model 017)

Denim Jeans, model 017, are women’s jeans designed for use by individuals with catheters, mobility disabilities, spinal cord injury, or those who have difficulty dressing. Available lined or unlined, these stretch jeans are designed for ease in sitting as the material contours to the curve of the body. Features include topstitching detail with a long rise and inseam, a 4-inch invisible zipper (available on the right or left side) to accommodate catheter tubing should the wearer choose to wear ca

Dependa-Bar

The Dependa-Bar is a wall-mounted grab bar designed for use by individuals with balance, walking, or mobility disabilities. Designed for use in the tub or shower or beside the toilet, this bar consists of a vertical wall-mounted grab bar with a horizontal fixed bar at the bottom, and a moveable P-shaped bar in the center. The moving bar locks every 45 degrees (5 positions), providing a support rail that moves with the user. This stainless steel unit mounts securely to structural studs behind bat

Depends Holder Bag (Model St107)

The Depends Holder Bag, model ST107, is a carrying bag designed for attaching to a wheelchair for individuals who use a wheelchair. This bag provides easy on/off handling and is made from light weight canvas. OPTIONS: Silk screening with your logo or message in a variety of colors is available upon request. DIMENSIONS: 16 x 24 with a 5.5 inch gusseted bottom. COLORS: Body color comes in natural. Assorted webbing and trim colors are available.

Derby Style Wooden Cane

The Derby Style Wooden Cane is a straight cane designed for use by individuals with walking or balance disabilities. Made of hardwood, this cane has an offset inverted L-style handle. The cane can be cut to the desired length. DIMENSIONS: 36 inches long. COLOR: Natural ash or burgundy.

Desborough Stacking Adjustable Height Commode (Model 181)

The Desborough Stacking Adjustable Height Commode, model 181 is a height adjustable commode designed for use by individuals with balance or mobility disabilities. Made from durable steel tubing with a plastic coating, this commode features a cushioned over seat, a flame-retardant and waterproof vinyl-covered back , a hinged toiled seat, a five-litre pan and lid, and adjustable-height leg tips. DIMENSIONS: The adjustable range from floor to top of toilet seat is 19.5 to 25.5 inches (495 millimet

Desborough Stacking Commode (Models 180 )

The Desborough Stacking Commode, model 180, is a fixed height commode designed for use by individuals with balance or mobility disabilities. Made from durable steel tubing with a plastic coating, this commode features a cushioned over seat, a flame-retardant and waterproof vinyl covered back, hinged toilet seat, two side arm supports, and a five-litre pan with lid. DIMENSIONS: The height from floor to top of the commode is 18.75 inches (475 millimeters[mm]). The width between the arms is 18 inch

Design And Drill Activity Center

Design and Drill Activity Center is designed for children 4 years and older through adult. It can be used with individuals with cognitive impairments, fine motor delays, and other neurological impairments. Users can use the patterns or their imagination to create pictures with colorful plastic 'bolts' and power drill or screwdriver. This kit includes 20 pattern cards, 120 bolts, plastic grid box and reproducible blank grid for make-your-own cards.

Design Basics Universal Access House Plans

Design Basics Universal Access House Plans are plans designed for use by builders of homes accessible to individuals with mobility or other disabilities. Designs include 2-, 3-, and 4-bedroom homes in Country, Traditional, or Farm House style with 1, 1.5, or 2 stories. Finished houses range from 1,394 to 3,061 square feet. Custom alterations can be made.

Designer Lighted Umbrella - Ripple Effect

The Designer Lighted Umbrella-Ripple Effect is an umbrella with light designed for use by individuals with mobility disabilities or low vision or seniors. This umbrella combines high-intensity light with high-intensity reflective material to provide 360-degree visibility at night from over a quarter-mile of a mile away. The umbrella is equipped with a replacable six-volt krypton bulb in a chrome housing. The umbrella has a fiberglass shaft and polycarbonate ribs and is windproof in winds up to 4

Designer Lighted Umbrella - Slow Flow

The Designer Lighted Umbrella - Slow Flow is an umbrella with light designed for use by individuals with mobility disabilities or low vision or seniors. This umbrella combines high-intensity light with high-intensity reflective material to provide 360-degree visibility at night from over a quarter-mile of a mile away. The umbrella is equipped with a replacable six-volt krypton bulb in a chrome housing. The umbrella has a fiberglass shaft and polycarbonate ribs and is windproof in winds up to 40

Designer Lighted Umbrella - Water Beads

The Designer Lighted Umbrella - Water Beads is an umbrella with light designed for use by individuals with mobility disabilities or low vision or seniors. This umbrella combines high-intensity light with high-intensity reflective material to provide 360-degree visibility at night from over a quarter-mile of a mile away. The umbrella is equipped with a replacable six-volt krypton bulb in a chrome housing. The umbrella has a fiberglass shaft and polycarbonate ribs and is windproof in winds up to 4

Desk Arm / Large Lap Hugger (Models 6515L, & 6517)

The Desk Arm/LargeLap Hugger is a torso support designed to prevent forward leaning by people who use wheelchairs. This foam padded support is covered with wipe-clean vinyl and fits between the wheelchair user and the wheelchair frame and also provides arm support. Notches fit around the armrest posts. DIMENSIONS: Model 6517 fits wheelchairs 18 to 20 inches wide with desk-length arms and model 6515L fits wheelchairs 20 to 24 inches wide.

Desk Chair

DO-IT-YOURSELF-ENTRY --- PURPOSE: To create an adjustable, mobile desk chair that assists with standing. A barber’s chair was fixed to a homemade wooden platform equipped with casters and a hydraulic unit attached. The chair can be raised and lowered while in use by pulling on a rope attached to the foot lever or pushing on the lever with an inverted cane. The user can also use it to assist with standing by maneuvering the chair into place, stabilizing the user’s knees, and rising. MATERIALS: Ba

Desk Shelf

DO IT YOURSELF ENTRYPURPOSE: To create a lower work surface on an existing desk. This shelf adapts an old-style rolltop desk with twin drawer pedestals (one on each side) beneath the desktop, with an open area between them. A pair of roller drawer slides is installed on the inner faces and a piece of plywood is fit between them, creating a shelf that slides out of sight when not in use. The shelf accommodates a laptop computer and a mouse or it can be used as a writing surface and for paper st

Desk Wheelchair Cover

SureFit's Desk Wheelchair Cover is designed for use by individuals with limited mobility due to physical disabilities or neurological impairments who want to add a touch of style and comfort to the manual wheelchair. It features a classic quilting on the back and arms (which are padded for added comfort) and attractive colors, these Standard Wheelchair Covers instantly transform your chair into a more comfy place to be. Each Standard Wheelchair Cover also features a reversible, removable, dual-

Desk-Length Armrest (Model Ar20) And Full-Length Armrest (Ar24)

The Desk-Length Armrest (model AR20) and Full-Length Armrest (AR24) are single post armrests that come with mounting hardware and are designed for use on seating systems. They can be attached to aluminum pans to be non-removeable, removeable with fixed height, or height- adjustable with fixed lower limit. Desk-Length Armrests are 9 inches long and Full-Length are 14 inches long.

Desktop Desk

The Desktop Desk is an adapted desk or table adapter designed for use by individuals with fine motor, orthopedic, or mobility disabilities. Placed on top of a table or other table-like surface, this lightweight, portable unit provides a large, stable writing surface with adjustable heights and angles. The unit's clear plastic, removable and erasable writing surface allows for templates to be used in writing practice or for tracing art. An accessory tray attaches to either side of the unit and pr

Developmental Pull-Up Bar

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Designed to allow children to work on developing their upper body strength with a pull-up bar. This pull-up bar takes gravity out of the equation by allowing the student to practice the same motion using a scooter and choices for difficulty. The child or teacher can select which height is best for the attempt. Children grab on to the bar while placing their bodies on the scooter (long scooters are easier than short scooters) and they pull up and relea

Developmental Scooter (Model 1470)

The Developmental Scooter, model 1470, is a hand propelled scooter that allows a child with mobility or neurological disabilities to move in a prone position. Constructed of 3/4 inch plywood with padding. The padding gradually increases to 9 inches thick under chest area, elevating head and shoulders. Covered in washable vinyl coated nylon. Rolls on four 2 inch diameter casters. Front casters swivel 360 degrees. Includes safety straps and rope for pulling. DIMENSIONS (LxW): 43 x 16 inches.

Device To Access Swimming Pool

CUSTOM ADAPTATION PURPOSE: To provide swimming pool access for a person with intellectual and physical disabilities. A 24-volt solar-charged pool hoist from Australian manufacturer Wymo was chosen for this adaptation. However, when lowered into the pool using the hoist, the user needed to be supported while she was removed from the sling. She also needed support during the reverse process of putting the sling back on when she was being taken out. A “landing bay” was made in the pool for the ind

Device To Assist In Reaching Stove Knob

CUSTOM ADAPTATION PURPOSE: To enable an individual with mobility and upper extremity disabilities to safey access the knobs located on a panel above and behind the burners of a stove. A device was created using a piece of standard PVC pipe with a stopper at one end and a thread at the other end which fits precisely over the splines on the stove knobs. To make the thread, a piece of brass was machined on a lathe to match the knob profile. Twenty-four splines to match the knob were then machined

Device To Attach Pram (Child's Stroller) To Wheelchair

CUSTOM ADAPTATION PURPOSE: To design and build a removable device which would lock a pram (child's stroller) into position at the front of a wheelchair for a person with paraplegia. Several ideas were considered but the final solution involved lifting the back wheels of the pram off the ground and putting the weight on the front pram castors and the front wheelchair castors. Lightweight 16-millimeter square steel tubing was used to build a frame which clamps in place on both wheelchair and pram

Device To Tilt Wheelchair Backwards

CUSTOM ADAPTATION PURPOSE: To tilt the wheelchair backwards during hair washing and perming. Once the sink water discharge point was lowered by a plumber, a platform was constructed to tilt the wheelchair backwards. The hinged platform was made of steel angle and 12 millimeter plywood and is raised and lowered using a standard scissor car jack. A belt of the type used to secure wheelchairs for vehicle transport is bolted to the higher end of the platform. A removable ramp at the lower end provi

Devon Deluxe Folding Support Rail

The Devon Deluxe Folding Support Rail is a wall grab bar designed for use in the bathroom by individuals with mobility or balance disabilities. The U-shaped epoxy-coated steel tube rail is affixed to a plated mounted on the wall. A spring mechanism allows the rail to fold up against the wall when not in use. DIMENSIONS: The tubing 1.75 inches in diameter and the unit is 30 inches long. COLOR: White.

Devon Floor-Mounted Folding Rail

The Devon Floor-Mounted Folding Rail is a floor-mounted grab bar for toilet designed for use by individuals with mobility or balance disabilities. The U-shaped epoxy-coated steel tube rail is affixed to a floor-mounted post using an adjustable clamp. A large plastic adjustment knob enables the rail to be placed wherever needed on the post. A spring mechanism reduces the effort required to lower and raise the rail, and holds it up securely out of the way when not in use. The post is fixed to a fl

Devon Rail With Folding Leg

The Devon Rail with Folding Leg is a wall grab bar for toilet designed for use by individuals with mobility or balance disabilities. The U-shaped epoxy-coated steel tube rail is affixed to a plate mounted on the wall. A spring mechanism allows the rail to fold up against the wall when not in use. The folding leg provides additional security and lessens strains on the wall. The height of the rail can be adjusted prior to wall mounting. DIMENSIONS: The rail is 30 inches long. The height adjusts fr

Devon Support Rail

The Devon Support Rail is a wall grab bar designed for use in the bathroom by individuals with mobility or balance disabilities. The U-shaped epoxy-coated steel tube rail is affixed to a plated mounted on the wall. A spring-loaded cam allows the rail to fold up against the wall when not in use. SIZES: Standard and short. DIMENSIONS: The tubing on both models is one-inch in diameter. The standard model is 30 inches long and the short model is 21.5 inches long. COLOR: White.

Diamond Homecare Bed

The Diamond Homecare Bed is a motorized bed designed for use by individuals with obesity and severe physical or mobility disabilities or spinal cord injury. This bed is available in semi-electric and full electric models with Trendelenburg, Reverse Trelenburg, and cardio-chair positions. The bed has two electric drive modules and is equipped with a manual emergency crank and a hand control. The bed deck is thermoformed plastic. The frame splits in half for transportation and assembly and has fou

Diana Lift

The Diana Lift is a free-standing powered or hydraulic transfer lift designed for use with individuals with mobility disabilities. Available in mini, compact, and comfort models, the lifts come a choice of a manual hydraulic pump lifting mechanism or an electric motor and push-button controls. All models feaure a tip-free U-shaped base, easy-grip handlebars, a pinch-free boom arm, and four heavy-duty ball bearing double caster wheels for mobility. Two wheels are equipped with parking breaks for

Diestco Armrest Front Bag

The Diestco Armrest Front Bag is a caddy for a scooter or powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This large basketball-shaped and sized bag mounts to the end of armrests with the included straps and is detachable when not in use. Made of water-resistant nylon, this bag has a lightweight aluminum frame to retain the shape and a zippered top cover. DIMENSIONS: 7 inches high x 12 inches in diameter.

Diestco Armrest Pocket

The Diestco Armrest Pocket is a wheelchair side pocket designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. Made of waterproof nylon, the pocket attaches to the wheelchair armrest with the included straps. DIMENSIONS: 11 x 5 x 3 inches.

Diestco Basket Liner

The Diestco Basket Liner is a liner for scooter baskets designed for use by individuals with mobility or lower extremity disabilities. Made of water-resistant nylon, this liner has a zippered top. DIMENSIONS(WxLxD): 13 x 10 x 7 inches.

Diestco Cargo Shelf

The Diestco Cargo shelf is an under seat pocket designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. This mesh shelf attaches to the frame of manual wheelchairs underneath the seat with the included hook-and-loop straps. DIMENSIONS(WxD): 15 x 16 inches.

Diestco Deluxe Armrest Saddle Bag (Model B2121)

The Diestco Deluxe Armrest Saddle Bag, model B2121, is a wheelchair or scooter side pouch designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of water-resistant nylon, this pouch can be mounted on the inside or outside of an armrest on a scooter or wheelchair. This pouch has one flap-covered main compartment, side pockets, a zippered interior pocket, and two small outside pockets for a cell phone or glasses. DIMENSIONS(WxLxD): 10 x 8 x 3 inch

Diestco Deluxe Scooter Tiller Bag

The Diestco Deluxe Scooter Tiller Bag is a scooter fron pouch designed for use by individuals with lower extremity or mobility disabilities. Made of watter-resistant nylon, this bag has a front zippered pocket, a front mesh pocket, a side pocket, and an inside pocket. It attaches to the handlebars and can be mounted in front or behind the tiller. DIMENSIONS(WxLxD): 9 x 12 x 3 inches.

Diestco Deluxe Seatback Bag

The Diestco Deluxe Seatback Wheelchair Bag is a wheelchair or scooter back pouch designed for use by individuals with lower extremity, severe physical, or mobility disabilities or spinal cord injury. Made of water-resistant nylon, this pouch attaches to the seat back with the included harness-style mount. The bag can be used with captain-style scooter seats or with wheelchairs with push handles. The bag has several pockets, including a back mesh pocket, a zippered back pocket, side pockets, and

Diestco Deluxe Walker Bag

The Diestco Deluxe Walker Bag is a carrying bag for walker designed for use by individuals with walking or balance disabilities. Made of water-resistant nylon, this bag attaches to the side of the walker using four attachment straps. This bag has a side pocket with hook-and-loop closure, a front zipper pocket, front and side mesh pockets, and a back pocket. DIMENSIONS(WxLxD): 9 x 12 x 3 inches.

Diestco Down-In-Front Wheelchair Bag

The Diestco Down-in-Front Wheelchair bag is an under seat pocket desighed for use on manual wheelchairs without armrests. Made of water-resistant nylpn, this single-pocket bag attaches to the lower front frame of the wheelchair behind the user's legs with buckle-closure straps. DIMENSIONS(WxLxD): 11 x 6 x 3 inches.

Diestco Extra Large Armrest Saddle Bag (Model 2131)

The Diestco Extra Large Armrest Saddle Bag, model B2131, is a wheelchair or scooter side pouch designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of water-resistant nylon, this pouch mounts on a scooter or powered wheelchair armrest and has a front zippered pocket, mesh pockets in front and on the sides, an inside pocket, side loops, and a secret pocket. DIMENSIONS(WxLxD): 12 x 16 x 2 inches.

Diestco Fabric Cane And Crutch Holders (Models B6213 & B6313)

The Diestco Fabric Cane and Crutch Holders are cane or crutch holders for wheelchairs or scooters side pouch designed for use by individuals with mobility, walking, or lower extremity disabilities. Made of water-resistant nylon, this carrier is shaped similarly to a golf bag and is available with a mounting system for use on captain-style scooter seats or wheelchairs without push handles (model B6213) or on wheelchairs with push handles (model 6313).

Diestco Fabric Oxygen Tank Holder (Models B6211 & 6311)

The Diestco Fabric Oxygen Tank Holder is a oxygen cylinder carrying case designed for use by individuals with mobility and respiratory disabilities. Made of water-resistant nylon, this case attaches to wheelchairs and scooters with hook-and-loop straps. Model B6211 is designed for use on scooters with captain-style seats or powered wheelchairs without push handles. Model B6311 is designed for manual and transport wheelchairs with push handles.

Diestco Large Armrest Saddle Bag (Model B2125)

The Diestco Extra Large Armrest Saddle Bag, model B2131, is a wheelchair or scooter side pouch designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of water-resistant nylon, this pouch mounts on a scooter or powered wheelchair armrest and has a variety of pockets and compartments. DIMENSIONS(WxLxD): 9 x 12 x 3 inches.

Diestco Mid-Range Seatback Bag (Model B1117)

The Diestco Deluxe Seatback Wheelchair Bag, model B1117, is a wheelchair or scooter back pouch designed for use by individuals with lower extremity, severe physical, or mobility disabilities or spinal cord injury. Made of water-resistant nylon, this pouch attaches to the seat back with the included harness-style mount. The bag can be used with captain-style scooter seats or with wheelchairs with push handles. The bag has several pockets, including a back mesh pocket, a zippered back pocket, and

Diestco Monster Seatback Bag (Model B1113)

The Diestco Monster Seatback Bag, model B1113, is a wheelchair or scooter back pouch designed for use by individuals with lower extremity, severe physical, or mobility disabilities or spinal cord injury. Made of water-resistant nylon, this pouch attaches to the seat back with the included harness-style mount. The bag can be used with captain-style scooter seats or with wheelchairs with push handles. The bag has a lightweight aluminum frame to keep it open. DIMENSIONS(WxLxD): 13 x 18 x 10 inches.

Diestco Standard Armrest Saddle Bag (Model B2111)

The Diestco Standard Armrest Saddle Bag, model B2111, is a wheelchair or scooter side pouch designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of water-resistant nylon, this pouch can be mounted on the inside or outside of an armrest on a scooter or wheelchair. This pouch has one flap-covered main compartment and two small outside pockets for a cell phone or glasses. DIMENSIONS(WxLxD): 10 x 8 x 3 inches.

Diestco Standard Seatback Wheelchair Bag

The Diestco Standard Seatback Wheelchair Bag is a wheelchair or scooter back pouch designed for use by individuals with lower extremity, severe physical, or mobility disabilities or spinal cord injury. Made of water-resistant nylon, this pouch attaches to the seat back with the included harness-style mount. The bag has a zippered top. DIMENSIONS: 12 x 12 x 3 inches.

Diestco Universal Cup Holder

The Dietsco Universal Cup Holder is a wheelchair drink holder designed for use by individuals with mobility disabilities or spinal cord injury. This holder attaches to the wheelchair or scooter armrest with the included mounting hardware.

Digging Tool

DO IT YOURSELF ENTRY --- PURPOSE: To produce a long-handled digging tool designed for use by individuals in a sitting position. Cut curved handles out of wood with a bandsaw, designing them to be as long as needed to provide an easy reach from a sitting position. Attach a broken hay rake tine to create the digger. MATERIALS: Wood to be cut for handle; hay rake tine. TOOLS: Bandsaw. SKILLS REQUIRED: Basic shop skills. TITLE: Doing It Yourself. AUTHOR: Wechsler, K. JOURNAL: Quest. WEB SITE: http:/

Digipad-Ii Econo Series Touchpad

The Digipad-II Econo Series Touchpad is a driving control system designed for use by individuals with upper extremity disabilities. It can be configured for almost any make or model of vehicle. The touchpad can be used to access 15 commonly used vehicle functions: ignition; start; intermittent, low and high wipers; wiper wash; park lights; headlights; low, medium, and high front fan speeds; cruise on; cruise set; park brake; and one additional auxiliary function. Access to these 15 functions is

Digital Chair Scale (Model 6475)

The Digital Chair Scale, model 6475, is designed to accommodate individuals needing to be weighed in a seated position. The unit features lift-away armrests and footrests, oversized transport wheels, power switch, L.E.D. readout, pound/kilogram selector switch, and a zero reset button. OPTIONS: Rechargeable Ni-cadmium battery pack ($195). POWER: 120 Alternating Current Volts (VAC), 50/60 Herz power adapter with 6 foot power cord. CAPACITY: 400 pounds or 181.4 kilograms. WEIGHT: 94 pounds. COLOR

Digital Door Viewer

The Digital Door Viewer is a visual security system designed for use by individuals with physical or visual disabilities. The device is designed to allow the user to see who is outside their door without having to stand or to position their face against the door. Features include a color digital camera and large liquid crystal display (LCD) distortion-free display monitor. The system is operated by pressing a large, clearly marked button. Installation (installation kit included) requires no ext

Digital Home

Digital Home is a voice input and output environmental control unit designed for use by peoples with a a variety of disabilities, including wheelchair users and people with severe physical disabilities. It has built in independent voice recognition, and enables the user to control home lighting and appliances with verbal commands. The system responds to the user's voice by speaking back and confirming the verbal commands over a home theater system or stereo system, if such a system is connected.

Digital Scale (Model Bf 878)

The Digital Scale, model BF 878, is a transfer lift scale attachment designed to enable individuals with mobility disabilities to be weighed in a transfer lift. The compact self-contained scale attaches to the lift and provides a digital readout in pounds and kilograms. Calibrated to 0.1 percent in acuracy, this scale features automatic shutoff to conserve battery life. POWER: Uses one 9-volt lithium battery to provide approximately 3,000 readings. DIMENSIONS: 3 x 3 x 4 inches. CAPACITY: 400 pou

Digital Wheelchair Scale (Model Mph072241)

The Digital Wheelchair Scale, model MPH072241, is a digital wheelchair scale designed for use by individuals with mobility disabilities or spinal cord injury. This scale has a non-skid platform with ramp to accommdate users in wheelchairs or straight leg chairs, as well as ambulatory users. Other features include vertical fold-up and heavy-duty wheels for storage and transport. The scale is accurate to 0.2 pounds. POWER: Uses battery. DIMENSIONS (LxW): 28 x 32 inches. CAPACITY: 800 pounds.

Dino Wheel

The Dino Wheel is a manual wheelchair wheel designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. The wheel has a hub milled from a solid piece of billet aluminum, with 12 tubular aluminum spokes, and double wall deep V aluminum rims. The wheel is lightweight and responsive to the user's push, and it has the strength for everyday use. The low spoke count allows access through the wheel. The wheel has standard 6-tab handring mounting holes. The maxim

Direct Mount Clamp (Model 247-Dm100)

The Direct Mount Clamp, model 247-DM100, is lapboard mounting hardware designed specifically for attaching the MYDESC desktop lapboards (see separate entries) to wheelchairs without armrests or without removable armrests. This metal clamp block has a tightening knob for use with tube framing from 0.75 to 1.25 inches in diameter. The device can be mounted either vertically or horizontally, and also features an 0.83-inch cylinder slot to mount the lapboard, or umbrellas, directly onto the wheelcha

Dishdrawer Single Drawer Dishwasher (Model Ds605)

The DishDrawer Single Drawer Dishwasher, model DS605, is an under counter dishwasher designed for use by individuals who use wheechairs or who have difficulty bending over. This compact dishwasher holds five place settings in a drawer located just under the kitchen counter. Features includes nine cycles for specific washing needs, a flow-through detergent dispenser, electronic controls, nylon racks, a delay wash option, and sound insulation. OPTIONS: Two-drawer model (model DD605) with one draw

Disposable Wheelchair Cover (Model Mc-5)

The Disposable Wheelchair Cover, model MC-5, is designed to protect manual and power wheelchairs, commodes, oxygen tanks, etc. DIMENSIONS: 28 x 22 x 35 inches. COLOR: Clear plastic.

Diy Balance Board

--- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself, low-cost balance physical therapy board for children with balance disabilities. First, using Popsicle sticks evenly spread the glue all over each side of the cardboard pieces. Adhere the three pieces of cardboard together using clothes pins or a clamp. Cut a pool noodle to about 10 inches length wise and glue it to the underside of the cardboard square. After the glue has dried, the balance board is ready for the child to u

Diy Computer Desk

---- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself accessible computer desk for an individual with Amyotrophic Lateral Sclerosis (ALS). This do-it-yourself computer desk is adapted from Sauder assemble-it-yourself furniture. First, the bookshelf was assembled according to instructions and necessary for getting the proper measurements for the height needed for the desktop. The desktop was constructed from 30 by 30 inch sheet of ¾ inch plywood. The length of the desktop can be

DIY Giant Hospital Nurse Call Button (3D Printed)

Giant hospital nurse call button 3D printed is designed for use by individuals with limited upper extremity strength and coordination who need to press a call button for assistance while positioned in a hospital bed. 

DIY Go Baby Go - Joystick controlled powered device

Go Baby Go - Joystick controlled powered device is designed for use by children with limited physical mobility as a result of spinal bifida, cerebral palsy, or stroke. It allows children to experience independent movement through a modified toy off the shelf.  

Diy Incredible Elevator Stick

--- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself utility reaching stick for pressing buttons for individuals with upper extremity disabilities. When navigating in small spaces such as an elevator, pressing buttons can be problematic. First, determine the length of the stick needed. The stick should be long enough to reach the highest elevator button for the elevator(s) most likely to be used, but not so long that it is difficult to carry. To determine how long the stick sho

Diy Kinetic Photovoltaic Vehicle (Kpv)

---- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself easily transportable solar-electric two-wheeled scooter for use by individuals with mobility disabilities. Working as an engineer on a Canadian schooner, Terry Hope, found himself in need a solution to bring aboard an electric scooter that could fit in a suitcase. A stock steel scooter frame is augmented with a variety of hand-made and off-the-shelf parts. The end result is home-built solar-electric Kinetic Photovoltaic Veh

Diy Mounting Board For Walker

---- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself mounting board for walker with a seat. A piece of band iron is attached to the support bard of the walker. Then attach the board to the support bar on the walker using the bolts, nuts, and washers. The size of pipe holders, bolts, nuts, and washers depends on the cutting board being used. Finally, industrial strength Velcro is used to attach the Vantage to the board. MATERIALS: Hard plastic cutting board with rubber trim, 2

DIY Nurse Call through Voice Recognition

DIY: Nurse Call Through Voice Recognition is designed for use by individuals with limited upper and lower extremity mobility as a result of multiple sclerosis, stroke or a spinal cord injury.

Diy Pediatric Arm Immobilizer

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: To prevent bending at the elbow. It can be used to keep the arms straight while putting weight through hands during activities such as sitting or lying over a therapy wedge. It can also be used to keep a child from bending their elbows to prevent further damage to a surgery site.

Diy Portable Wheelchair Ramps

--- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself (DIY) portable wheelchair ramp for individuals with lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair to enter or exit to houses, shops or other locations. An individual had used store-bought ramps made of aluminum and found they did not work well and were expensive. Step 1: Calculating the ramp length - The Americans with Disabilities Act Accessibility Guidelines (ADAAG) recommend

Diy Snow Tires

--- DO IT YOURSELF ENTRY --------- PURPOSE: To create do-it-yourself snow tires for manual or powered wheelchair for individuals with mobility disabilities. Acquire sturdy/plastic wire ties that are long enough to go around the thickness of the wheelchair’s tire and wheel (approximately 6.5 to 8 inches and 50 pound strength or more). Depending on the size of the wheelchair’s wheel and tire, tie approximately 25 to 30 ties evenly around each wheel and tire of a manual wheelchair. Power wheelchai

DIY Switch Air-Surfer

DIY Switch Air-Surfer is designed to assist individual with limited mobility and fine motor coordination due to cerebral palsy, stroke, and brain injuries participate in recreational play by using a switch to fly the model plane. Materials 1x "Air-Surfer". 2x 3.5 millimeter mono headphone socket. Thin wire (e.g 7strand 0.2 millimeter). Shrink-wrap. Soldering iron (15 to 30 Watt power). Thin solder. Soldering flux. Desoldering braid. Cordless drill with 1x 1/4 drill bit. Knife or wire strippers.

DIY Transfer Bath Bench

DIY Transfer Bath Bench is designed for use by individuals with mobility disabilities to assist with moving from one surface to another. 

Dolphin Bath Seat (Model Do 2000)

The Dolphin Bath Seat, model DO 2000, is a child's bath seat designed for use by children with severe physical, neurological, balance, or mobility disabilities or spinal cord injury. This seat fits all standard tubs and has a folding aluminum frame upholstered with quick-drying mesh fabric. The chair is length adjustable and the seat and back adjust independently, with the back support offering 10 angle positions, including trendelenberg. The seat is depth-adjustable and offers five tilt positio

Dolphin Patient Positioner

The Dolphin Patient Positioner is a transfer lift sling designed for use with individuals with mobility disabilities. Designed to aid in patient repositioning during the use of a lifting sling, this dolphin-shaped unit enables patients to be lifted or repositioned to or from a sitting or reclining position. Individuals lifted from a sitting position will remain sitting up unless being positioned in or to a bed. In those instances, as the upper body reclines, the unit automatically adjusts to ena

Dominik

The Dominik is a child's manual wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: Three different frame lengths are available. The brightly-colored frame is includes push handles and a support roll. It folds compactly for transport and storage. Seat tubes are integrated into the side frame. SEAT: A variety of seat widths and lengths are available in connection with the different frame lengths. The back includes adju

Donning Shoe Stand

Donning shoes is a stand design that can be done at home to help people with physical and cognitive disabilities, Hemiplegia, hip problems, and other related disabilities. The stand helps to elevated the shoe so that the user can independently put it on, tie it, or tighten it. It is built like a store stool with a triangular center for precision and stability. To make, start with foam with a shallow channel in the center. Then insert and glue a loop of webbing to make the device easy to pick up

Door Butler

Door Butler is a door opener and door closer designed for use by individuals with mobility disabilities. This non-electric device utilizes a Red Thing non-slip hold-open tab to open the door to the position determined by the setting of the tab. The unit enables the individual to close the door while the tab is still engaged on the closer rod. To activate the auto open feature, the door is unlatched from the closed position, and the door automatically opens to the preset position. The door closes

Door Closer

DO IT YOURSELF ENTRY --- PURPOSE: To provide a means for individuals with arthritis or upper extremity, balance, or mobility disabilities to close doors. Included in a chapter entitled "Housekeeping & Getting Around," this article provides detailed instructions and illustrations for creating a door closer using basic materials. Screw eyes are screwed into the door and the doorframe and a heavy, smooth cord is tied to them. A heavy ring-shaped handle is tied to the end to the end of the cord

Door Finger

The Door Finger is a door closing aid designed for use by people with mobility or lower extremity disabilities, spinal cord injury, and others who use a wheelchairwho have difficulty closing a door behind them. The unit is made of a light weight durable acrylic tube with a soft neoprene hand grip. A cord lock at the top allows it to fit around standard door knobs as well as door levers. With the cord looped around the knob or lever, the user can close a typical door by pulling on the tube. DIME

Door Hinge Expandable (Model 10654)

The Door Hinge Expandable is a door hinge designed to widen doorway openings for wheelchair users. The hinge adds two inches to any doorway opening. The hinges are installed using existing hinge holes and screws. DIMENSIONS (LxW): 3.5 x 2 inches.

Door Protection Kick Plate (Model 194S)

The Door Protection Kick Plate, model 194S, is a protective panel designed to protect a door from wheelchair-related damage. The plate is available in 0.05-inch gauge aluminum, brass, bronze, or stainless steel with six 0.63-inch truss head screws. OPTIONS: Self-adhesive tape; Spanner head screws; Torx head screws; counter sunk hole. DIMENSIONS: 8, 10, or 12 inches high, with custom width 2 inches less than door width.

Doozy Mains Controller

Doozy Mains Controller is designed by children and adults with limited motor control as a result of cerebral palsy, stroke or motor neuron disease who use switches to control electrical appliances or adapted toys.  There are two mains sockets it can operate two devices simultaneously using the same settings. The easy touch controls and clear indicator lights, it is simple to choose the desired functions. Insert your switch or switches into the input sockets on the front of the controller or use

Dorado

The Dorado is an adaptive fishing rod holder designed for individuals who use wheelchairs or who have upper extremity disabilities. This adapted fishing device has a unique spring-loaded tube that allows the user to adjust the fishing rod to 1 of 4 fishing positions, including lift and reel. No wheelchair modifications are required to mount the Dorado clamps to the wheelchair - just drill 2 holes into the base plate of the Dorado to securely clamp it in place. This will give the rod holder more

Dot-To-Dot Therapy Book

This Dot-To-Dot Alphabet Book is designed for individuals with upper extremity disabilities or those who have poor fine motor ability, poor dexterity, etc. or to help novice learners or slower learners to learn the sequence of alphabet letter, while at the same time, building their eye-hand coordination skills. Contains 64 pages of dot-to-dot alphabet activities, a bonus incentive chart, and 140 gold star stickers.

Double Bed Hand Bed Assist (Model 135)

The Double Bed Hand Assist, model 135, is a grab bar for bed designed for use by individuals with mobility or balance disabilities. This tubular metal frame fits between the bed base and the mattress, offering a rigid handle on either side of the bed. DIMENSIONS: The width is adjustable to fit a 3-foot twin bed through a 5-foot double bed. The height of handle from mattress base is 440 millimeters (mm) and the overall length is 335 mm.

Double Button Folding Walker (Models Pc1767Ys & Pc1789)

The Double Button Folding Walker, models PC1767YS and PC1789, is a folding walker designed for use by individuals with mobility disabilities. Features include a push button adjustable frame, vinyl hand grips, two front castors, and two rear rubber leg tips. Other features include a raised front crossbar that permits use over a commode. Model PC1767YS is for use by children and Model PC1789 is for use by adults. DIMENSIONS: The height adjusts from 32 inches to 36 inches. The width between hand g

Double Joyrider

The Double Joyrider is a 4-wheeled cycle with side-by-side seating for two people designed for use by individuals with balance, neurological, or physical disabilities. Designed similarly to a over-sized three-wheeler, this cycle features two large mag wheels in the rear and two independent smaller mag front wheels. This cycle offers independent pedaling, enabling two riders to pedal, one rider to pedal while the other rests, or one rider to pedal alone. Standard features include individual handl

Double Reeboundnet Kit

The ReeBoundNet Kit is an eye-hand coordination activity designed for use by children 13 years of age and older and adults with fine motor or neurological disabilities. The Kit includes two back-to-back nets on a large square frame enabling two activities to take place simultaneously. The users can hit the net target with bean bags and balls in any eye-hand coordination activity program. The net has one fixed bounce-back angle designed for maximum returns; however, the bounce-back angle can be s

Double-Sided Quilted Walker Bag (Model F703220050)

The Double-Sided Quilted Walker Bag, model F703220050, is a carrying bag for walker designed for use by individuals with mobility, walking or balance disabilities. Made from a durable poly/cotton blend, this bag drapes over the center bar of a walker, and it has front and back pockets to hold personal items. The bag is secured with hook-and-loop closures. DIMENSIONS (LxWxD): 15.5 x 6.5 x 1.5 inches. The pockets are 13 x 10 inches. COLORS: Available in blue and burgundy prints or gray and burgund

Double-Sided Quilted Walker Tote Bag

The Double-Sided Quilted Walker Tote Bag is a carrying bag for a walker designed for use by individuals with mobility disabilities. This cotton bag drapes over the center bar of the walker and has a large pocket on each side. The bag is secures with hook-and-loop closure and is machine washable and dryable. DIMENSIONS: The pockets are 13 x 9 inches. COLOR: Available in patterns or solid colors.

Down-Under Shelf (Model Wh185)

The Down-Under Shelf, model WH185, is an under seat carrying caddy designed for use by individuals who spend long periods of time in wheelchairs. Designed for rigid wheelchairs, this caddy attaches under the chair with Velcro straps and provides ample space for school books, shopping items, clothing, etc. DIMENSIONS (HxWxD): 4 x 14 x 11 inches. COLOR: Black.

Doze

---- PROTOTYPE --------- PURPOSE: To design a prototype of a sleep positioner for children with disabilities, particularly those children who experience muscle tension and loss of muscle tone. Doze is a sleep positioner that assists with side-lying posture at bedtime. The pod-like design decreases the risk of sleeping in awkward positions that may interfere with growth, put pressure on the spine, as well as affect air flow resulting in breathing problems. The Doze design is inspired by the armad

Dr. Joseph's Diabetic Foot Kit

Dr. Joseph's Diabetic Foot Kit is a footbrush and inspection mirror set designed for use by individuals with diabetes and mobility disabilities or arthritis. This kit includes a long-handled brush, an adjustable inspection mirror, two small sponges for cleaning between toes and applying medication, a larger sponge for general cleaning, and a monafilament for testing foot sensation. The assorted sponges, the brush, and the mirror snap on to the long plastic handle. A wrist strap is also included.

Dr. Joseph's Universal Adl Accessories

Dr. Joseph's Universal ADL Accessories are a footbrush, inspection mirror, dressing hook, leg lifter, and shoe horn designed for use by individuals with diabetes and mobility disabilities or arthritis. Designed to provide hygiene, inspection, and care of the lower leg, ankle, and foot, the components are available individually to enable the user to select only those items that are needed. Available components include the universal long handle only, the universal handle with footbrush, a packag

Dragon

The DragonFly is a powered elevating wheelchair designed for indoor or outdoor use by individuals with mobility or neurological disabilities or spinal cord injury. FRAME: Modular powerbase in a choice of six standard colors. The chair disassembles for transport. CONTROLS: Programmable joystick with a separate controller for the elevator. SEAT: The seat features an elastometric suspension and is custom-made to fit every individual. SEAT ELEVATOR: The powered seat elevator adjusts the height of th

Drain Fitting (Model Lkad18)

Drain Fitting, model LKAD18, is an offset draining fitting designed for use under wheelchair-accessible sinks. Made of chrome-plated brass, it has an offset tailpiece that allows wheelchairs to fit under the sink and a chrome-plated steel perforated grid strainer. DIMENSIONS: Drain opening is 3.5 inches in diameter; the strainer is 3 inches in diameter; top diameter is 4.5 inches. The tailpiece is offset up to 12.75 inches.

Drain Fitting (Model Lkad35)

The Drain Fitting, model LKAD35, is an offset drain fitting designed for use in wheelchair-accessible bathrooms and kitchens. This fitting has a stainless steel body and strainer basket, with a chrome-plated brass tailpiece that is offset to allow wheelchairs to fit under the sink. The drainer has a flex stem and rubber stopper. DIMENSIONS: Drain opening is 3.5 inches in diameter. The top diameter is 4.5 inches. The tailpiece is offset 12.75 inches.

Drawstaring Linen/cotton Pant (Model 015)

The Drawstring Linen/Cotton Pant, model 015, is women’s slacks designed for use by individuals with catheters, mobility disabilities, or spinal cord injury. Made of linen and cotton, these pants feature a functional drawstring in front, an elastic waist at the back, and a long rise and inseam. Other features include a four-inch invisible zipper to accommodate catheter tubing should the wearer choose to wear catheter accessories outside of clothing. The zipper is on the right side (left side ava

Dreamfit Motorcycle

---- PROTOTYPE --------- PURPOSE: To design a prototype of a motorcycle that can be used by individuals with paraplegia. Inspired by a paraplegic ex-motorcross champion, West Australian Darren Lomman established a project to create a motocycle for paraplegic riders based on a heavily modified Honda CBR250RR. The prototype is road licensed and operational and has the potential to become a commercial product. Started as a university project, the Dreamfit CBR250RR has been modified to suit riders p

Dress (Model 20150)

The Dress, model 20150, is a women's dress designed for wear by senior women and women with arthritis or other physical disabilities. Made of silky polyester, this dress offers three-quarter length sleeves, a full overlap back, and dome closures at each shoulder for ease in assisted dressing. Other features include a shallow V neckline, a pleated front, and one patch pocket. SIZES: Small, medium, large, and extra large. DIMENSIONS: The sleeves are 17 inches long. COLOR: Enchanted blue or assorte

Dressing Stick

DO IT YOURSELF ENTRYPURPOSE: To enable individuals with upper extremity disabilities, arthritis, or mobility disabilities to dress independently. The dressing stick can be used to pull up trousers, pull a shirt or sweater up onto a shoulder, an pull socks up. This illustrated article, included in a chapter entitled "Bedroom & Getting Dressed," provides detailed instructions and illustrations for making a dressing stick from materials readily available at hardware stores: a dowel and a plasti

Dressing Stick

"DO IT YOURSELF" ENTRY --- PURPOSE: To enable individuals with upper extremity disabilities, arthritis, or mobility disabilities to dress independently. To make this device, pre-drill starter holes in each end of dowel. Insert dowel into pipe insulation, if desired. Put a dab of glue in one hole of in the dowel. Twist the cup holder into hole, being careful not to split dowel. Put a dab of glue in open hole at other end of dowel. Twist the hat/coat hook into hole, being careful not to split dow

Dressing Stick (Model Da-5201)

The Dressing Stick, model DA-5201, is a dressing aid designed for use by individuals with arthritis or mobility disabilities. It has a smooth wooden shaft with a large plastic coated "C" hook at one end and a push/pull hook at the other, and can be used to position clothing. DIMENSIONS: 690 millimeters long. WEIGHT: 127 grams.

Dressing Table

DO IT YOURSELF -- PURPOSE: To make daily grooming tasks more accessible to individuals who use wheelchairs or who are unable to stand for long periods. This article, included in a chapter entitled "Bedroom & Getting Dressed," provides suggestion for creating an accessible vanity and personal grooming area. Suggestions include using a small, sturdy table with a comfortable seated height and sufficient knee clearance for a dressing table. If needed, select a chair that meets the user's specifi

Drink Holder

The Drink Holder is a wheelchair drink holder designed for use by individuals with lower extremity, mobility or walking disabilities or spinal cord injury. The unit consists of a stainless steel frame with a clamping system for attaching to a chair, crutches or walker. The clamp has a rubber grommet to prevent scratching, along with an adjustable Velcro tightening strap. The holder can be carried in the user's wheelchair bag until it is needed. An insulated beverage jacket is included. It can al

Drink Holder

CUSTOM ADAPTATION PURPOSE: To provide a means for an individual with severe phyical disabilities to carry beverages. A chrome-plated curtain rod was used to make a vertical tube system that fits into brackets installed on a wheelchair. A horizontal crossbar supports a plastic container which, in turn, holds a cup or glass that the user can access with a straw. TITLE: Easels, Calling Systems and More. JOURNAL: TAD Journal. REF: Volume 24, Number 4, Summer 2004: P. 16-17. PAGES: 3 (including cove

Drinkup Travel Lite

The Drinkup Travel Light is a wheelchair drink holder with a long straw designed for people who have lower extremity or mobility disabilities and spinal cord injury and grasping, fine motor, upper extremity, severe physical disabilities or upper extremity amputation. The Drinkup Travel light consists of a water bottle cage with a bracket so it can be attached to the backrest frame of a wheelchair. It has a semi-rigid flexible arm that extends upward past top of backrest and forward around to the

Drive Along Play Car (Model 1008)

The Drive Along Play Car, model 1008, is a puzzle with large pieces and a sensory integration activity designed to teach beginning matching skills to children with physical, cognitive, or neurological disabilities. This toy car features a plastic body with an oversized steering wheel on the back and a large key on the top. The horn honks and the windows can be rolled up. The key clicks when turned, and the engine revs when the car is pushed. Other features include a shape sorter in the hood. Whe

Driver Side Transfer Seat By Veigel (Model 4500)

The Driver Side Transfer Seat, model 4500, is a car transfer aid designed for use by people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and drive automobiles. Designed to assist a car driver who uses a wheelchair when transferring into and out of an automobile, this padded seat bridges the gap between the wheelchair and the driver seat. The padded seat can be removed or folded when not in use.

Drop Arm Commode

The Drop Arm Commode is a commode with removable arms designed for use by individuals with severe physical disabilities requiring easy transfer from a wheelchair or bed. The commode features an adjustable position backrest and a plastic pail with a 6 3/8 quart capacity. The commode assembles without tools. DIMENSIONS (HxDxW): 22 x 20 x 22.75 inches. The width between the arms is 18 inches. WEIGHT: 18 pounds.

Drop Base

The Drop Base is a ABS plastic solid seat panel with cutouts for wheelchair cross braces designed to allow the mounting of custom or commercial seat cushions level with or below seat rail level. The panel fits between the seat rails, with 1- and 2-inch drop hooks to fit 7/8-inch or 1-inch rails. DIMENSIONS: Sized to fit 16 and 18 inch widths.

Drop Front Or Inner Seam Opening Fleece Pants (Model C121-2)

The Drop Front or Inner Seam Opening Fleece Pants, model C121-2, are children's pants designed for use by children with mobility disabilities, severe physical disabilities, spinal cord injury, or incontinence. These pants come with either a complete inner crotch opening, or a drop front opening from waist to hip on both sides. Drop front openings can be used with urinals and provide space for dressing. The inner seam crotch opening allows for changing of personal needs without undressing or taki

Drop Seat And Cushions (Models 6540, 654020, 6541, & 6519)

The Drop Seat and Cushions is a solid seat insert and a gel and foam or foam seat cushion designed to lower the height of wheelchair seats to enable self-propulsion using the feet or to enable the user to reach the footplates to stop sliding. This seat can be used with standard or hemi chairs and lowers the center of gravity, making the chair less likely to tip. This seat attaches to the frame in place of the standard seat without the use of tools. A drop seat gel and foam cushion to reduce the

Drop Seat Base And Hardware

The Drop Seat Base ($42.50) and Hardware ($169) are a combination solid seat insert and adjustable hook hardware designed to fit 7/8 or 1 inch diameter wheelchair seat rails. Gravity hook assemblies allow automatic locking of the seat base onto the frame. It requires cutting of the plate to accommodate wheelchair cross-frame tubes, and drilling to mount hardware in appropriate locations.

Drop Seats (Models 31649, 31651, 31655, & 31656)

Drop Seats are solid seat inserts are designed for use by individuals who use wheelchairs. Made of seven-ply birch, these seats have pre-drilled mounting holes and include T-nuts. Cutout slots fit around chair frame crossmembers. DIMENSIONS: Model 31649 fits chairs with 14-inch seats and is 14 x 11 inches; model 31651 fits chairs with 16-inch seats and is 15 x 13 inches; model 31655 fits chairs with 18-inch seats and is 17 x 15 inches; and model 31656 fits chairs with 20-inch seats and is 19 x 1

Drop-Arm Commode (Model 8900)

The Drop-Arm Commode, model 8900, is a commode with removable arms designed for use by individuals with balance and mobility disabilities and incontinence. A push-button arm release accommodates transfers. The arms have soft foam handles. DIMENSIONS: Overall width is 21.75 inches. CAPACITY: Maximum weight capacity is 300 pounds. COLOR: Available in white or chrome.

Drop-Arm Commode (Model 9669)

The Drop Arm Commode is a commode with removable arms designed for use by individuals with mobility or severe physical disabilities. Designed to aid with transfers within restricted or confined areas, this commode features lever release for drop down-arm, angled legs with adjustable-height leg extensions, silencing collars to minimize rattles, four non-skid rubber tips, and snap-on seat and lid. OPTIONS: Convertible to mobile model with optional adjustable wheeled legs. A splash shield is availa

Drop-Arm Commode (Models A92407 & A92408)

The Drop-Arm Commode, model A92407 and A92408, area height-adjustable commodes designed for use by individuals with mobility disabilities. These units can be used at a bedside or over a toilet and features side arms that drop out of the way for smooth transfers. The polyester coated steel angled frames allow for the extension of the leg and hip. A commode pan and cover are included. DIMENSIONS: (Model A92407): The base is 28 inches wide and 20 inches deep. The seat is 8 inches wide and 16 inches

Drop-Stop Footrest Extender /legrest Pad(Series 7032)

Drop-Stop is a footrest extender designed to prevent foot drop in people who use wheelchairs. The modular extenders create a platform which enables footrests on footrests and geri chairs to be raised from one to four inches to provide improved positioning, sliding control, and weight distribution. The included padded legrest cushion prevents the user's feet from sliding off the footrests. DIMENSIONS: Available in 16- and 18-inch widths and in a choice of one, two, three, or four inches high.

Dual Level Bathtub Rail

The Dual Level Bathtub Rail is a grab bar for the bathtub designed for use by for individuals with mobility disabilities. The rail provides the individual with a high/low grip support, including a straight crossbar, for support while moving into or out of the bathtub. Each gripping area has a textured finish. The rail clamps to the side of the tub with adjustable spring steel clamps lined with rubber pads to protect the tub. DIMENSIONS (HxDxW): 16 x 1 x 12 inches. The clamp adjusts from 3.5 to

Dual Paddle Adult Folding Walker

The Dual Paddle Adult Folding Walker is a folding adjustable walker designed for use by individuals with walking disabilities. The Ergonomic Paddle can be depressed with the palm for the folding and unfolding of the walker. The handles "lock-in" when the walker is opened. This walker folds flat for compact storage. OPTIONS: Walker wheel and glide accessories are available. DIMENSION (HxDxW): 30 x 17 x 20 inches. The eight adjusts from 30 to 37 inches in 1-inch increments. The width between the

Dual Paddle Youth Size Folding Walker

The Dual Paddle Youth Size Folding Walker is a folding adjustable walker designed for use by children with walking disabilities. The Ergonomic Paddle can be depressed with the palm for folding and unfolding of the walker. The handles "lock-in" when the walker is opened. This walker folds flat for compact storage. OPTIONS: Walker wheel and glide accessories are available. DIMENSION (HxDxW): 25.25 x 16 x 20.5 inches. The height adjusts from 25.25 to 32.75 inches in 1-inch increments. The width be

Dual Purpose Oxygen Cylinder Holder (Model Cs1200)

The Dual Purpose Oxygen Cylinder Holder, model CS1200, is an oxygen cylinder carrying case designed for use by individuals with respiratory disabilities who use either a wheelchair or a walker. This dual purpose unit allows the user or a caregiver to move oxygen cylinders from a wheelchair to a two-wheeled walker and back. The unit attaches to most two-wheeled walkers and most wheelchairs, including bariatric wheelchairs. The unit is made of polyester with Velcro straps for attaching to the whee

Dual Tilt In Space With Shear-Controlling Power Recline Systems

Dual Tilt in SpaceShear-Controlling Power Recline Systems are powered reclining systems designed for use with power-base style powered wheelchairs. This system fits Invacare, Quickie, Jazzy, Everest & Jennings power bases and offers a full 90 degrees of tilt and 57 degrees of tilt or any combination in between. This system slides the seat backward as the seat back reclines, taking pressure off sensitive areas and controlling shearing in the lumbar, sacral, and ischial regions. Standard featu

Dublup Ballpool

The Dublup Ballpool is ball flotation therapy designed for use with children with neurological, balance, or mobility disabilities. The Ballpool walls are created by joining two Dublup Size 1 shapes (see separate entry). The unit is then lined by attaching the included ball sack inside the walls with Velcro to complete the pool, which can then be filled with the included 800 balls. OPTIONS: An additional sack of balls is included. DIMENSIONS: The pool is 57 inches in diameter. COLOR: The balls co

Ducks On A Pond

Ducks on a Pond is designed for children with neurological and upper extremity disabilities who are working on improving their kinesthetic awareness, hand skills and upper extremity stability. Players work to move the magnetic duck through each maze by moving the magnetic handle under the maze board. Vision is blocked so sense of kinesthesia is facilitated. Comes with 3 ducks, 3 handles, 6 maze boards and wooden maze holder. Frame requires some assembly. COLOR: Blue table top. WARRANTY/GUARANTEE

Duct Tape Crutch Pockets

“DO IT YOURSELF” ENTRY --- PURPOSE: To adapt crutches with pockets for storage of everyday items such as a book, eye glasses, Kleenex, etc. for persons with mobility disabilities. The pockets are made of videotape boxes cut in half and spliced together; although, duct tape alone or other thin-type boxes can be substituted for shape and structure. To make pockets for the crutches, tape across a nice-sized box, straight around the crutch frame. Taping on a diagonal keeps the pockets stable. Posi

Duet Transport Chair And Rollator

The Duet is a combination transport wheelchair and rollator designed for use by individuals with lower extremity, walking, or mobility disabilities. This product functions as a four-wheeled rollator and as a transport wheelchair. The Duet folds for storage or transport, and it converts from a rollator to a wheelchair by flipping up a backrest. It is equipped with a front footrest bar, loop hand brakes, and under-seat storage. DIMENSIONS(WxLxH): 25.5 x 26 x 37 inches open; and 25.5 x 14 x 37 inch

Durachair 1000

Durachair 1000 is a geriatric chair with wheels. The chair has a furniture-grade PVC tubular frame that provides support without sharp edges; a multi-position backrest and multi-position legrest that operate independently; non-absorbent waterproof fabric covers; twin wheel casters; and a safety belt. DIMENSIONS (HxLxW): 48 x 48 x 24 inches. Casters are 4 inches in diameter. WEIGHT: 38 pounds. COLOR: White frame. Fabric or solid vinyl upholstery is available in a variety of colors.

Durasoft Half Tray

The DuraSoft Half Tray is a swing-away lap tray designed for use as a wheelchair accessory by individuals with lower extremity or mobility disabilities or spinal cord injury. For those people who do not need the surface area that a full lap tray provides, the DuraSoft Half Tray provides a smaller surface on one side of the wheelchair. It is available in left- and right-handed models. The unit has a rigid insert covered by high resiliency foam with a solid cover. A raised outside edge keeps the u

Duraswing Mk 4R On-Demand Door Operator

The DuraSwing MK 4R On-Demand Door Operator is a powered door operator designed for use by individuals with mobility disabilities. This door operator unlocks, power opens, holds open, power closes and re-locks doors. It can close doors automatically or on demand. It works with interior and exterior doors up to four feet wide that latch when closed, including wheelchair lift gates and elevator swing doors. It can operate in either an in-swing or out-swing configuration, can be configured for righ

Dwyer Ada Kitchen Series - Elevated Refrigerator Design (Models Sae0735Bhr, Sae0765Bbr, Sae0795Bbr, Sae0825Bbr, Sae0855Bbr, Sae0885Bbr, Sae091Bbr, Sae0945Bbr, & Sae0975Bbr)

The Dwyer ADA Kitchen Series - Elevated Refrigerator Design, is an accessible kitchen with an elevated refrigerator, designed for use by individuals with arthritis or other disabilities that make it harder to bend over to reach lower shelves. The standard unit includes upper and lower cabinetry with bail style handles, post-formed laminate countertop, built-in upright refrigerator/freezer, 2-burner Ceran cooktop, range hood, drop-in stainless steel sink and Dwyer limited swing faucet. Except in

Dwyer Signature Ada Series

The Signature ADA Series is a kitchen with accessible components designed for use by individuals with lower extremity or mobility disabilities, spinal cord injury, short stature, or other physical disabilities. This kitchen system includes a large-capacity, frost-free upright refrigerator; electric surface burners; sink bowl; single- lever faucet; and exhaust hood. The Adaptable Sink Base converts to meet Americans with Disabilities Act specifications and the folding design stores components an

Dx Compact 900 (Maxiflex)

DX Compact 900, also called Maxiflex, is a powered wheelchair designed for indoor or outdoor use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 87 x 62 centimeters. The chair has a 117 centimeter turning radius. CONTROLS: P&G Dynamic electronic controls. FWD: Front wheel drive. SEAT (LxW): 40 to 51 x 49 centimeters. The backrest (HxW) is 51 to 64 x 50 centimeters. The comfort seat is padded with a full back. ARMRESTS: Height- and width-adjustable armrests. WHEE

Dycem Jar Opener (Model 16K027A)

The Dycem Jar Opener, model 16K027A, is a jar opener designed for use by individuals with upper extremity disabilities, arthritis, or grasping disabilities. The device is a hollow cone lined with Dycem, which exerts a strong grip on most surfaces. The user places it over the top of the jar and turns. The device can be used to open jars with lids from 1 to 4 inches in diameter. COLOR: Blue.

Dynamic Articulating Footrest

The Dynamic Articulating Footrest is a footrest extender designed for use by people with lower extremity or mobility disabilities or spinal cord injury and others who use a manual or power wheelchair. This footrest extender allows for both extension and rotation of the footplates to mimic the motion of the knee joint and leg. It also allows for three different ranges of articulation (knee rotation): 0 degree (linear motion only), 30 degrees and 50 degrees. A shield is used to prevent pinch point

Dynamic Forehead Strap System (Model Dfs-1)

The Dynamic Forehead Strap System is a headrest accessory designed to support the head for individuals who have difficulty maintaining their head in an upright position. It is meant for use with the S.O.F.T. headrest system (see separate entry). The system consists of pulleys that allow the forehead band to move with the user, providing greater freedom of movement. The strap is designed to float about freely with the user. The straps are available in two different styles. The first features a te

Dynamic Parapodium

The Dynamic Paradium is parapodium designed for use by individuals with paraparesis and paraplegia. A Parapodium is a type of orthosis equipped with a large base and is used to assist individuals with lower extremity and trunk paralysis in assuming an upright position without the additional support of crutches. The Dynamic Parapodium is designed to enable users to gain vertical position of the body while allowing for active rehabilitation and movement. The device is composed of a frame with late

Dynavox T10

DynaVox T10 and its incorporated compass app, is a portable communication board that includes a range of communication page sets designed to specifically address the needs and strengths of individuals with Autism, Cerebral Palsy, Stroke, Traumatic Brain Injury, Apraxia, Down Syndrome, ALS and other neurological, developmental and communication challenges. DynaVox Compass software is research-based communication option for individuals who cannot use their natural voice to participate more fully

E Z Back System (Models Ezl2001, Ezl2002, & Ezl2003)

The E Z Back System, models EZL2001, EZL2002, and EZL2003, is a back support that can be mounted on sling back wheelchairs, commodes, driver or automobile passenger seats, or chairs. The system includes two laterals, a Velcro back, and a front panel with lumbar support. The system's lateral supports are independent of one another, so they are interchangeable from side to side. The system's lumbar support is also adjustable, so the system can give the user needed lateral or pelvic support. OPTION

E-Motion

E-Motion is a power assist for wheelchairs designed for use by individuals with mobility disabilities. This unit can be retrofitted to most manual wheelchairs simply by replacing the existing rear push wheels with the e-motion wheels and installing a universal bracket on the wheelchair frame. The quiet brushless, gearless electric motors are located in the wheel hubs. The unit offers three different levels of power that can be selected at the touch of a button. Stage 1 offers a 30 percent power

E-Move

The E-Move is a wheelchair designed for use by individuals with limited physical mobility.  The motor is built into the hub. The range has been extended by 20%. The extra width of the wheelchair has also been reduced by 10%.  The E-Move can be programmed to suit each user’s needs. It is also possible to have two programs and switch between them, for example, 1 for indoor use and 2 for outdoor use. Some examples of the adjustments that we can make for users are:  Power assist, between 0% and 100%

E-Pad Portable Laptop Desk (Model 643585P)

The e-Pad Portable Laptop Desk with Speakers, model 643585p, is a notebook/laptop computer support designed for use by individuals with mobility disabilities. This lap desk has a sturdy surface designed to keep a laptop computer stable and the padded, angled design keeps the user's lap cool. This desk features a built-in carry handle and cable pass-through. COLOR: Bamboo top with tangerine or plum cushion or walnut top with cocoa, cranberry, or olive cushion. WARRANTY: One-year limited warranty.

E-Pad Portable Laptop Desk With Speakers (Model 653246P)

The e-Pad Portable Laptop Desk with Speakers, model 653246p, is a notebook/laptop computer support designed for use by individuals with mobility disabilities. This lap desk has a sturdy surface designed to keep a laptop computer stable and the padded, angled design keeps the user's lap cool. This desk features two built-in stereo speakers that connect to a laptop, MP3 player, or other handheld device via 3.5 millimeter (mm) jack. Other features a storage pouch for media players, built-in carry h

E-Z Access Ramp (Models Raez0110, Raez0120, Raez0130, Raez0140, Raez1110, Raez1120, Raez1130, Raez1140, Raez1510, Raez1520, Raez1530, Raez1540, Raez2150, Raez2160, & Raez2170)

The E-Z Access Ramp is a ramp designed for use by individuals with mobility disabilities or spinal cord injury. The ramp has a 1:12 slope and can be installed on any surface at interior or exterior thresholds. It has a slip-resistant, scuff-resistant surface, and can be cut to exact size and covered with carpet. DIMENSIONS (HxLxW): 7/8 x 6 x 42 inches (model RAEZ0110), 7/8 x 6 x 60.5 inches (model RAEZ0120), 7/8 x 6 x 69.5 pounds (model RAEZ0130), 7/8 x 6 x 78.5 inches (model RAEZ0140), 1.25 x

E-Z Lock Raised Toilet Seat

The E-Z Lock Raised Toilet Seat is an elevated toilet seat designed for use by for individuals with balance and mobility disabilities. The raised toilet seat assists individuals who have difficulty bending or sitting. A locking mechanism secures the seat to the toilet bowl. The smooth, contoured seat has built-in handgrips. DIMENSIONS (HxDxW): 8.5 x 17 x 15.5 inches. The unit adds 5 inches to the height of the toilet seat. COLOR: White.

E-Z Lock Raised Toilet Seat With Arms

The E-Z Lock Raised Toilet Seat with Arms is a safety frame with an elevated toilet seat designed for use by individuals with balance and mobility disabilities. The raised toilet seat assists individuals who have difficulty bending or sitting by raising the height of the toilet seat. A locking mechanism secures the seat to the toilet bowl. The smooth, contoured seat has built-in handgrips. The seat is equipped with padded armrests. DIMENSIONS (HxDxW): 20 x 17 x 15.5 inches to the top of the arms

E-Z Pull Door Closer

The E-Z Pull Door Closer is a door closer designed for use by individuals with mobility or walking disabilities or spinal cord injury. This unit enables the user to close any size door behind him or her while using a walker, wheelchair, or mobility scooter. The device consists of a unit that snaps onto the door handle, and an acrylic hook that is applied to the door to pull it shut. WARRANTY: Lifetime warranty replaces any unit damaged through normal use.

E-Z Ski Universal Walker Skis (Model W604)

The E-Z Ski Universal Walker Skis, model W604, are walker glide tips designed for use on walkers with front wheel attachments. These ski-shaped glides install on the rear legs using the attached adjusting cylinder to improve walker mobility. DIMENSIONS: The adjusting cylinder accommodates 7/8- and one-inch leg shafts. COLOR: White.

E-Z Slider Shoehorns

E-Z Slider Shoehorns are long-handled shoehorns designed to assist people who have difficulty bending with donning and removing shoes. Fabricated of Thera-coated spring steel, the shoehorns have non-slip handle grips. DIMENSIONS: Shoehorns are available in 12-, 18-, 24-, 30-, and 36-inch lengths. The handle grips are 6 inches long. WARRANTY: The manufacturer warrants this product against defects in materials and workmanship for 90 days from the date of purchase.

E-Z-Lock Tray Clamp (Model 31096)

The E-Z-Lock Tray Clamp, Model 31096, is lapboard mounting hardware designed to secure lapboards and trays to wheelchairs. This clamp is designed to attach any tray to any wheelchair arm using a simple locking motion. OPTION: An attaching hardware kit for securing the clamp to the tray is available separately ($10.50). WARRANTY: the manufacturer warrants this product against defects in workmanship and materials for 90 days from the date of purchase.

E-Zee Gait Belt (Models 6524V & 6528V)

The E-Zee Gait Belt, models 6524V and 6528V, is designed to provide a secure grasp for therapists and caregivers during ambulation training and transfers for people with balance, lower extremity, mobility or walking disabilities. This machine-washable cotton belt has Velcro closure for easy application. DIMENSIONS (LxW): 62 x 2 inches. The belt fits 24- to 52-inch waists. COLOR: Model 6524V is white and model 6528V is navy.

E.fix Basic & E.fix Plus

E.fix Basic and E.fix Plus are add-on power units for manual wheelchairs designed for use by individuals with mobility disabilities or spinal cord injury. These units come as a solid insert or pneumatic drive wheel system for adult or children's manual wheelchairs. With the electric drive installed, the wheelchair remains foldable and portable. Users can switch from power to manual operation by turning the wheel hubs. The ergonomic joystick controller indicates battery capacity on a back lit liq

Eagle Eyes

EagleEyes is designed for individuals who have limited to no intentional muscular control but have control of their eye movement as a result of stroke, traumatic brain injury, Rett syndrome, neurological disorders, spinal muscular atrophy and severe cerebral palsy. The mouse pointer follows the location that the user is looking at on the screen. The eyes replace the mouse. Selection is made by looking at a small area of the screen for a short period of time, which causes a mouse click. Usable wi

Eagle Health Aluminum Companion Chair

The Eagle Health Aluminum Companion Chair is a folding manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 32.5 x 24 inches. The frame is lightweight aluminum and is available in either black or blue. SEAT (LxW): 16.5 x 16 inches. The floor-to-seat height is 20 inches. UPHOLSTERY: Blue padded nylon upholstery. ARMRESTS: Fixed full-length armrests. WHEELS: Nylon wheels with polyurethane tires. FOOTRESTS: Detachable, swing-away footrests

Eagle Health Aluminum Frame Wheelchair

The Eagle Health Aluminum Frame Wheelchair is a folding manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 41.25 x 36 inches. The frame is lightweight aluminum and is finished in black lacquer. SEAT (LxW): 16.5 x 15.5 to 16.5 inches. The floor-to-seat height is 19.5 inches. UPHOLSTERY: Blue padded nylon upholstery. ARMRESTS: Flip-up desk-length armrests. WHEELS: Nylon wheels with polyurethane tires. FOOTRESTS: Detachable, swing-away f

Eagle Health Steel Frame Wheelchair

The Eagle Health Steel Frame Wheelchair is a folding manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 43 x 23.375 to 25.75 inches. The frame is triple-coated chrome steel. SEAT (LxW): 16.5 x 15.75, 17.75 or 19 inches. The floor-to-seat height is 19.5 inches. UPHOLSTERY: Blue padded nylon upholstery. ARMRESTS: Flip up desk-length armrests. WHEELS: Nylon wheels with polyurethane tires. FOOTRESTS: Detachable, swing-away footrests. CAPA

Eagle Single Rider Vehicle With Standard Seat

The Eagle Single Rider Vehicle with Standard Seat is an adapted golf cart and personal electric vehicle designed for use by individuals with walking or balance disabilities, arthritis or limited stamina. This single rider golf car allows the user to play golf without getting out of the cart. When the user approaches a golf ball, he or she can position the vehicle, put it in “park,” and then rotate the seat and hit the ball while seated. The frame/chassis is made of welded tubular painted steel a

Eagle Single Rider Vehicle With Tilt Seat (Model 724Ts)

The Eagle Single Rider Vehicle with Tilt Seat, model 724TS, is an adapted golf cart and personal electric vehicle designed for use by individuals with walking or balance disabilities, arthritis or limited stamina. This single rider golf car allows the user to play golf without getting out of the cart. When the user approaches a golf ball, he or she can position the vehicle, put it in “park,” and then rotate the seat and hit the ball while seated. The frame/chassis is made of welded tubular paint

Eagle's Nest Field Events Chair

The Eagle's Nest Field Events Chair is a sport wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. The chair is designed to leave the throwing arm free and to support the user while throwing. The standard design has casters and an armrest / push handle on the non-throwing side. The throwing side has no armrest, so the throwing arm is free, and has non-wheeled legs so the chair stays in place during the throw. Each chair is custom made.

Eas Ille Lift Chair Ii (Model 196)

The EAS ILLE Lift Chair II, model 196 is a powered bath lift for hydrotherapy. Features include a handheld pushbutton controller, a U-shaped base, casters with a foot controlled locking and release device, a removable seat with tubular armrests and padded headrest, and handles on the back of the unit for attendant propulsion. POWER: Rechargeable battery. CAPACITY: Maximum user weight is 600 pounds.

Eas Ille Lift Stretcher Ii (Model 197)

The EAS ILLE Lift Stretcher II, model 197, is a powered bath lift designed for transferring individuals from bed to therapeutic modality (e.g. whirlpool, tub, tank) for hydrotherapy. The stretcher has a tubular frame which is adjustable from 180 degrees horizontal to partial or full sitting position. The lift features a handheld pushbutton control, a U-shaped base, casters with a foot controlled locking and release device, side support at the hip section, and a headrest extension. POWER: Recharg

Ease-A-Bump, Wheelchair Bumper

Wheelchair bumper fabricated of 1 inch wall steel tubing. Covered in urethane foam padding with nylon cover. Weighs 5 pounds. Attaches to most wheelchairs with swing away foot rests. 13, 15, and 17 inch widths. Specify width of chair when ordering. Black.

Easel For Wheelchair

CUSTOM ADAPTATION PURPOSE: To provide a means for an individual with severe phyical disabilities to paint. The easel has a crossbar that restson the arms of a wheelchair with an arm in the center that points away from the user; a clamp at the end of the arm holds the vertical mount for the easel, which extends between the user's legs. The vertical mount supports a vertical rail equipped with two horizontal carriers that hold the painting in place. Another arm, mounted on the left, is equipped w

Easel Switch

--- "DO IT YOURSELF" ENTRY ------- A switch mounted to the front surface of a Triwall easel and covered by a square plate of expanded PVC material to enlarge the switch surface.

Easireach II (Models Aa8042 & Aa8043)

The Easireach II is a reacher designed for use by individuals with mobility disabilities. This device enables users to reach items overhead or on the floor without stretching or bending. This reacher features non-slip grasping jaws and a textured pistol grip handle. A magnetic tip aids in picking up small metal items and a post on top of the jaw aids with dressing and pulling objects to the user. A detachable clip secures the reacher to walkers, wheelchairs, bed rails, etc. and a hook on top fa

Easy Basket (Model W1616)

Easy Basket, model W1616, is a wire basket for walkers designed to provide carrying capacity for individuals with mobility disabilities. Made of vinyl-coated metal wire, this baskets hang on the front cross brace of most walkers. DIMENSIONS (LxDxW): 14.5 x 9 x 8 inches. COLOR: White.

Easy Bath

Easy Bath is a walk in bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. This tub features a low entry and is twice as deep as a standard tub. It is available with either a left- or right-hand door. It has a built-in, anti-slip, contoured seat; a built-in safety bar; and Giovanni chrome fixtures and drain assembly. DIMENSIONS: Entry is 6 inches high. COLOR: White. WARRANTY: 10-year warranty and a lifetime guarantee on the tub door seal.

Easy Bathe Walk-In Bathtub

The Easy Bathe Walk-In Bathtub is a walk-in bathtub designed for use by individuals with mobility or balance disabilities. Designed to fit most bathrooms, this tub features a guaranteed leak-free design and compact footprint; a low-level entry; a wide access door with a choice of right or left entry; an integral safety handle; a contoured, slip-resistant seat and backrest; height-adjustable showerhead; and, temperature-controlled hot water. The unit is available in corner or back-to-wall configu

Easy Caddy (Model 14A108A)

The Easy Caddy, model 14A108A, is a carrying tray and cup holder designed for use by individuals who use walkers. This tray clips in place on most folding wheeled walkers. It features a large compartment and a smaller shallower section. The top tray is recessed to hold items such as a dinner plate in place. The contoured sides have no dirt traps. A cup holder helps prevent spillage. The tray is made from durable plastic, supports up to 4.4 pounds, and can be cleaned by hand or in a domestic dish

Easy Cardholder

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: To assist children and adults with fine motor and grasping difficulties participate in a card game by using a phone book to hold the card.

Easy Comfort Lift Chair (Model Lc200)

The Easy Comfort Lift Chair, model LC200, is a seat lift and recliner chair designed for use by individuals with physical or mobility disabilities. The chair has a two-position all-electric lift and reclining mechanism with a button control, which either tilts the user back to rest, or rises to help the user stand. The chair has a hardwood frame, a heavy-duty steel lift mechanism, and a wide seat with soft fabric. POWER: Uses household current, with integrated emergency battery backup. CAPACITY:

Easy Crutch

The Easy Crutch is an axillary knee crutch designed for use by individuals with non-weight bearing lower leg injuries or lower extremity or mobility disabilities. This product resembles a standard axillary crutch except that it has a second leg attached near the bottom of the crutch, and there is a curve platform on top of the second leg on which the user rests his or her knee with the leg bent. The Easy Crutch is intended to be used singly on the side of the body with the injured or disabled le

Easy Glide Series (Models Eg100, Eg300, Eg400, & Eg900)

Manual folding wheelchair. Chrome plated steel frame with vinyl upholstery. Seat width 16 or 18 inches. Seat depth 16 inches. Spoked 24 inch rear wheels with pneumatic tires. Solid 8 inch front snap on casters. Footrests: fixed, adjustable, swing-away, or elevating. Armrests: fixed or removable with side guards. Wheel locks. Weight: 62 pounds with legrests.

Easy Mover Slide

Transfer aid made of unbreakable material and sealed steel bearings on a track. Eliminates need of physical lifting by attendant. Moves 650 pounds up or down a 20 degree incline. Available in 8 by 8 inch, and 8 by 12 inch seats. Overall size 8 inches by 30 inches.

Easy Pivot (Model Ep-250 & Ep-250/dr)

The Easy Pivot, model EP-250, is a hydraulic transfer lift designed for institutional and home use. This device uses a technique similar to standing pivot transfer: the person transferring bends over chest pad with a safety belt around hips and a front knee pad to prevent the knees from moving. This no sling approach minimizes skin injury during transfer and facilitates removal and adjustment of clothing in daily hygiene. FRAME: Welded tubular steel frame with a locking caster base. FEATURES: An

Easy Pivot Transfer Machine (Models Ep-100, Ep-100/dr, Ep-200, Ep-200/dr, Ep-300, & Ep-300/dr)

The Easy Pivot Transfer Machines are mechanical transfer lifts that duplicate commonly used standing pivot maneuver used for assisted transfers and eliminates need for weight support by an assistant. The user's legs are positioned against a padded knee retainer and the user leans over a cushioned chest pad. The assistant secures leg and shoulder straps and then pulls lever handle up to lift person to the transfer position. The user's feet and knees are stabilized as torso is raised to lift the b

Easy Platform Wheelchair Rocker

The Easy Platform Wheelchair Rocker is a rocking attachment for a wheelchair designed for use by individuals who use wheelchairs. This device enables the user to experience the benefits of rocking without transfering from a wheelchair. The rocker features entry/exit using a rear ramp. The adjustable front caster stops center the wheelchair on the platform and two safety straps secure the wheelchair to the platform for added security. DIMENSIONS (LxW): 48 x 30 inches.

Easy Reach

The Easy-Reach is a van lift designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This lift seat allows the original seat of a truck, SUV, van, or minivan to swivel out of the vehicle and lower to wheelchair height. The user then transfers from the chair to the vehicle seat, and presses a button to be lifted into the vehicle. The lift extends from the vehicle at an angle matching that of the door. A manual back-up system in case of vehicle power fa

Easy Risers

Easy Risers are cone-shaped leg extenders designed to assist individuals with arthritis, neurological, mobility and balance disabilities in rising from a seated position. These hardened plastic cones can also be used to elevate the head of a bed for individuals with respiratory disabilities or acid reflux or related conditions. The risers can also be used to elevate the back legs of a chair to aid individuals in shifting their weight over their feet to aid in rising. Other uses include elevating

Easy Up Caregiver Lifting Aid

The Easy Up Caregiver Lifting Aid is a transfer aid designed for use with individuals with mobility disabilities or Alzheimer's Disease. This device is a strong, comfortable, wide belt with handles on each end that enable a caregiver to firmly hold on and maintain control while assisting someone with sitting or standing. The belt allows the caregiver to use his/her weight to counterbalance. Reinforced with nylon, the machine-washable belt slips under the arms and around the back of the person b

Easy-Transfer

The Easy-Transfer is a car transfer aid designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This flip-down transfer seat acts as a bridge between a wheelchair or scooter and a vehicle seat. It attaches to the vehicle and can be stowed when the user is driving or when the car is used by other drivers or passengers. There are three levels of stowage: Flip-up to remain vertical between the car seat and the car door, detach and stow behind the car sea

Easy-Up Handle For Walker

Easy-Up is a handgrip attachment and walker handgrip extension bracket standing aid designed to alleviate discomfort and build greater self-reliance for persons with mobility disabilities. Composed of high impact molded polycarbonate, these standing aids are attached along the sides of a walker and are intended to help users rise from a sitting position without assistance in a variety of places: Chairs, couches, beds, and automobiles. WARRANTY: Three year limited warranty on material and defects

Easybelt (Models 6012, 6013, 6014, & 6015)

EasyBelt, models 6012, 6013, 6014, and 6015, is a transfer aid and gait belt designed for use with individuals with mobility or walking disabilities. The belt has strong vertical and horizontal handles for gripping support and can be used for sitting transfers or for supporting an individual when standing or walking. Made of moisture- and soiling-resistant nylon. SIZES: Extra small, with 5 handles (6012), small, with 7 handles (6013), medium, with 9 handles (6014), or large, with 11 handles (601

Easyglide (Models 5020, 5050, 5060, & 5070)

The Easyglide, models 5020, 5050, 5060, and 5070, is a transfer board designed for use by individuals with mobility disabilities. Designed to facilitate seated transfers between two surfaces, this hard, slick polypropylene board is also flexible to allow it to be bent over the wheel of a wheelchair. Anti-slip tape on the underside of the board prevents the board from sliding during use. This board also features a hand slot at each end. DIMENSIONS (LxWxH): Model 5020 is 24 x 13 x .2 inches. Model

Easyglide Walker Tips

The Easyglide Walker Tips are walker and commode tips designedd to facilitate moving a walker by individuals with mobility disabilities. These glide tips fit over the existing rubber tips on the rear walker legs. DIMENSIONS: Attach without tools to standard 1 1/8 inch walker leg tips. COLOR: Bright yellow.

Easypivot (Model 85 And 85/dr)

The EasyPivot, Model 85, is a mechanical transfer lift designed to assist in transfers from wheelchair to bed or shower for individuals who need total lift assistance, such as multiple sclerosis or spinal chord injury patients. This lift has dual lift handles which promotes good caregiver's body mechanics and reduces strain, helping to prevent back injuries. The patient places their feet on the base of the machine and then leans forward against the chestpad. When the patient is strapped, the car

Easyriser (Model Pl24Aj)

The EasyRiser, model PL24AJ, is a foot support designed to prevent pain in the back shoulders or arms for individuals whose workstation is standing at a tall counter. There is an anti-fatigue mat that provides cushioned comfort for the feet and legs and the sturdy steel frame and legs are built for durability. The platform adjusts to put the user at the right height to reduce fatigue and back strain, and the rubber feet hold the platform in position. The foot support is large enough to move arou

Easyslide (Model 1030)

The Easyslide, model 1030, is a transfer aid designed to assist caregivers in transferring individuals with mobility disabilities to X-ray, treatment, or operating tables; stretchers; or shower stretchers or to move the individual in bed. This tubular device consists of a protective woven nylon cover coated on one side with polyurethane and a quilted mat with a woven cotton outer shell; a woven, ultra-low friction nylon liner; and flame-retardant trevira padding. To use the slide, the individual

Easyslide (Model 1230)

The Easyslide, model 1230, is a transfer aid designed to assist caregivers in transferring individuals with mobility or severe physical disabilities. It can be used for transfers between beds and x-ray or operating tables, shower trolleys, and cots. It has a soft, padded outer surface for comfort in transferring, with ultra low friction (ULF) material on the inner surface of the sliding mat to reduce friction so individuals can be moved with minimal exertion. OPTIONS: Disposable protective polye

Easyslide (Model 1480)

The Easyslide, model 1480, is a transfer aid designed for use in moving individuals with mobility disabilities. It can be used to aid in transferring between beds and x-ray or operating tables, shower trolleys, or cots. This transfer aid has a soft, padded outer surface for comfortable transfers, with ultra low friction (ULF) material on the inner surface of the sliding mat to reduce friction so individuals can be moved with minimal exertion. OPTIONS: Disposable protective polyethene covers. DIM

Easyslide (Models 2010, 2015, 2020, & 2030)

The Easyslide, models 2010, 2015, 2020, and 2030, is a transfer aid designed to assist caregivers in moving or transferring individuals with mobility disabilities. It can be used in transferring between bed and x-ray or operating tables, shower trolleys, and cots. It has a soft, padded outer surface for comfortable transfers. Models 2010 and 2015 are made of polyester with ultra low friction (ULF) material on the inner surface of the sliding mat to reduce friction so individuals can be moved wit

Easystand Magician (Model 7000) & Mobile Magician (Model 7500)

The EasyStand Magician, model 7000, is a standing aid designed for children with mobility disabilities. This aid accommodates children in a variety of positions from seated to fully standing. Designed for children from 32 to 36 inches tall, this fully-adjustable aid has a tubular frame, a padded seat and back, side supports, knee supports, foot holders with foot straps, a seat belt, a clear acrylic tray, four locking casters, and a gas spring lift mechanism. The Mobile Magician, model 7500, offe

Easystand Magician Comfy Seat

The EasyStand Magician Comfy Seat is a child's mobile standing frame designed for use by children with lower extremity, mobility, or neurological disabilities. This standing system includes a wheeled frame with an upholstered seat that can be positioned for sitting, anterior tilt, or standing. Head and back supports maintain the child's position. Adjustments can be made to seat depth, kneepads, and footrests to accomodate growth or to enable different children to use the frame in a multi-user se

Easystand Magician-Ei

The EasyStand Magician-EI is a standing aid designed for children with mobility disabilities. This aid accommodates children in a variety of positions from seated to fully standing. This fully-adjustable device has a tubular frame, a wrap-around seat and back made of neoprene with Comfy Seat technology, side supports, knee supports, foot plates, a seat belt, a clear acrylic tray with front pad, four locking casters, and a gas spring lift mechanism. The Magician-EI, designed to be used by childre

Easytrack 2 Post, 3 Post, & 4 Post Systems

The Easytrack System is an overhead ceiling lift system designed for use with individuals with balance disabilities, cognitive disabilities, lower extremity disabilities, mobility disabilities, severe physical disabilities, and spinal cord injury. The system comes in a kit with no tools required and fits most standard ceilings in homes. The non-slip neoprene surface on both the foot plate and top plate ensure that the posts stay in place. The 2 Post System is designed to ease transfers. The 3 Po

Ec+ Extra Care Bariatric Transport Chair (Model 6850)

The EC+ Extra Care Bariatric Transport Chair, model 6850, is a powered transport chair and stretcher designed for use by individuals with obesity and mobility, neurological, or severe physical disabilities. It converts from a chair to a stretcher in order to facilitate transport and transfers. FRAME: In stretcher position, height is adjustable from 24.5 to 32.5 inches. Overall greatest width is 33.5 inches. There is a full width push handle. CONTROLS: Electric operation with pendant controls. SE

Eclipse

The Eclipse is a manual sport wheelchair that is both lightweight (16 lbs. base weight) and strong (made of alloy materials of aerospace quality). FRAME: Frame is provided with an 85 degree front end to enhance mobility with a reduced turning radius. SEAT DEPTH: 10 to 15 inches. SEAT WIDTH: 10 to 20 inches. SEAT HEIGHT: 8 to 16 inches. BACKREST: Folding or non- folding, 8 to 16 inches high, 10 to 20 inches wide. Folding design allows adjustment, upright locking, and folding within one mechanism.

Eclipse Residential Elevator

The Eclipse Residential Elevator is a home elevator designed for use by individuals with mobility disabilities or who use wheelchairs. This elevator can travel up to 60 feet, with up to six stops. Safety features include a stop switch; battery-powered emergency lowering and lighting; hand crank for manual lowering; motor brake; lockable control panel; elevator door interlocks; stop switch in car; in use indicator lights on hall stations; and, slack chain brake system. Other standard features inc

Eco Ada Compliant Dishwasher

The Eco ADA Compliant Dishwasher is a below counter dishwasher designed for use by individuals who use wheelchairs. This diswasher fits beneath ADA-compliant counters, as well as standard counters, and is full-size inside. Adjustable legs allow for under counter alignment and leveling to accommodate standard counters as well. Installation is simplified because the drain hose and electric supply cord come pre-connected. This device is Energy Star rated and uses 4.2 gallons of water per load. Feat

Eco-Buggy (Model 3210)

The Eco-Buggy, model 3210, is a stroller designed for use by children with lower extremity, mobility, or neurological disabilities who are able to remain upright without upper-body positioning aids. FRAME (HxLxW): 11.5 x 45 x 16.5 inches when folded. The frame is powder-coated aluminum with a snap-on under-frame storage bag. SEAT (LxW): 11.8 x 13.75 inches. The seat depth can be adjusted from 11.8 to 14 inches to accommodate growth. The backrest reclines and has a height of 21 5/8 inches. A pel

Ecomfort Lap Desk

The eComfort Lap Desk is a notebook/laptop computer support and stand for tablet computer designed for use by individuals with mobility or upper extremity disabilities. This lap desk can be used in a wheelchair, chair, bed, or at a table. This lap desk has a sturdy surface with a raised ledge near the bottom to keep a laptop or tablet computer stable and to keep other items from rolling or sliding off of the desk. The desk rests on a cushion with a padded, angled design intended to keep the user

Econo-Gel Pad (Models 751150, 751151, 751154, & 751155)

The Econo-Gel Pad is a single chamber gel flotation seat cushion designed for use in wheelchairs. This cushion combines heat-dissipating and pressure-reducing gel with a foam pad. All models are factory sealed in vinyl. Models 751150 and 751151 also include a launderable fabric cover. DIMENSIONS: Models 751150 and 751154 are 16 x 16 x 2 inches and models 751151 and 751155 are 16 x 18 x 2 inches.

Econoglide Transfer Boards

The Econoglide Series are Transfer boards designed to assist people with physcial disabilities in transferring from one surface to another. The boards are fabricated high density stress-relieved linear plastic. The moisture-proof boards are striate-sanded on one side and buff-sanded on the other. Models include the plain board, board with telescope and hand hole, board with hand hole, board with 2 hand holes, board with hand hole and notches, and board with 2 hand holes and notches. CAPACITY: 40

Economy (Model 8555) & Economy Lightweight

The Economy 8555, Economy Lightweight is a manual folding wheelchair. The 8555 is designed for home, rental and institutional use. The hardened steel frame has a double crossbrace construction. The seat and back dimensions are: overall 24.5 w x 36.25 h x 36 7/8 l, seat width 16.25, seat from floor height 20.25, back from seat height 15.5, and seat depth 15.75 inches. The embossed upholstery has textilene inner lining, royal blue being the standard color. Extra long toggle brakes, "Uni-Mold" Mag

Economy Ball Pool (Model 9Bpec)

The Economy Ball Pool, model 9BPEC, is a ball flotation therapy unitdesigned for use with children with mobility, neurological, or balance disabilities. This unit consist of a padded metal frame with a vinyl liner. The unit has a 6,000 ball capacity (balls not included).OPTIONS: Single large ball pool step, ball nets, and sets of 1,000 balls. DIMENSIONS (HxLxW): 24 x 90 x 65 inches.

Economy Grab Bars (Models H112, H116, H118, H124, H132, H132L & H132R)

The Economy Grab Bars are grab bars designed for use by individuals with balance or mobility disabilities. All models are made of steel with a polyester coating. The mounts are coated with soft plastic brushing. Models H132L and H132R are 90-degree angle grab bars available for right or left mounting. DIMENSIONS: Model H112 is 12 x 4.75 inches; model H116 is 16 x 4.75 inches; model H118 is 18 x 4.75 inches; model H124 is 24 x 4.75 inches; model H132 is 32 x 4.75 inches; model H132L is 32 x 4.5 i

Economy Hand-Held Shower (Model A830001)

The Economy Hand-Held Shower, model A830001, is a handshower with flexible hose designed for use by individuals with spinal cord injury or mobility or balance disabilities. The unit fits over the tub faucet and is equipped with a flexible vinyl hose. A suction lock wall bracket is included. DIMENSIONS: The unit fits faucets with outside diameter of 1.375 inch to 1.75 inches and the hose is 60 inches long.

Economy Molded Lap Tray (Model A70711)

The Molded Lap Tray, model A70711, is a lapboard designed for use by individuals with mobility or lower extremity disabilities who use wheelchairs. The lap tray is designed to enable the user to eat or do other activities from their wheelchair and to provide some protection from spills. The tray fits standard and desk arm wheelchairs and includes a cut-out area to accommodate the torso. Other features include a molded recess area for holding a cup or glass. OPTIONAL: A Comfort Pad (see separate

Economy Sand & Water Table (Model La309)

The Economy Sand & Water Table, model LA309, is a sand/water table designed for use by children with upper extremity, mobility, or cognitive disabilities. This table has a height-adjustable metal frame with a removable plastic tub. OPTIONS: A top is available. DIMENSIONS: This table has a 6.5-inch deep tub and is 20inches wide x 27.25 inches long. The stand adjusts from 18 to 21 inches high.

Economy Scooter Boards

The Economy Scooter Boards are designed to encourage movement, balance reactions and directionality. Fabricated from molded polyethylene, they roll on screwed-on rubber casters. OPTIONS: Sold individually or in sets of 12. One model features safety hand guards. DIMENSIONS: (Length x Width) - the boards are 12 x 12 inches or 16 x 16 inches.

Economy Shower Stall (Model Ess-1)

The Economy Shower Stall, model ESS-1, is a portable shower designed for use by individuals who cannot access a conventional bathroom. The stall requires no permanent installation or electrical or water connections, enabling it to be moved as needed, and it can be used for showering or as a privacy enclosure for a commode. The stall features replaceable vinyl shower curtains on all four sides for privacy. Other standard features include a shower unit with an electric pump for dispensing water fo

Economy Tub Rail

The Economy Tub Rail is a grab bar for bathtub designed for use by individuals with balance or mobility disabilities. The bar is made of chrome-plated steel with rubber pads on all tub contact points. Knurling around grab bar diameter provides a permanent no-slip grip. DIMENSIONS: 8 x 11 or 7 x 17 inches. WARRANTY: Limited lifetime warranty.

Economy Walker Basket (Model F70319-2000)

The Economy Walker Basket, model F70319-2000, is a wire basket for walker designed to provide carring capability for people with walking or balance disabilities. This plastic-coated wire basket attaches to the cross bar and upright bars of most walkers with Velcro strips. The basket includes a heavy-duty plastic tray with one large compartment, a coin or medication holder, an a round compartment for a glass, can, or cup. DIMENSIONS: 5.5 x 16 x 7 inches.

Economy Walsall Trolley

Economy Walsall Trolley is designed for use by individuals with generalized weakness, decreased strength and coordination associated with fractures, multiple sclerosis or other neurological disorders.   This trolley has a steel frame with angled handles to provide improved grip and stability.  The shelves have open sides for easy transfer of plates and dishes, and rubber castors give control on any floor surface.  Adjustable version features telescopic legs which adjust when pin clips are remove

Economy Wheelchair Belt (Model Mdt829110C)

The Economy Wheelchair Belt, model MDT829110C, is a wheelchair seatbelt designed for use by individuals with mobility disabilities or spinal cord injury. This seatbelt restraint helps the wheelchair user to remain upright in the chair without sliding. This belt encircles the user and crosses in back. The belt is made of washable nylon and is latex-free. SIZES: One size fits all.

Econoslide Series Transfer Boards

Econoslide Series Transfer Boards are designed to assist people who use wheelchairs. The 20 models of these boards are made from defect-free 7-ply birch plywood and have rounded corners, ends, and edges. The surface is machine-sanded and finished with clear lacquer. Models include the plain board, board with hand hole and telescope, board with hand hole, board with hand hole and notches, board with 2 hand holes, and board with 2 hand holes and notches. CAPACITY: 400 pounds. DIMENSIONS: All model

Econotray Series

The EconoTray Series are lapboards designed for use on wheelchairs. Fabricated of tempered hardboard with a woodgrain vinyl top, the trays are available in five models: the tray only, tray with 3-piece wood rim, tray with straps, tray with rim and straps, and tray with straps, pads, and a back strap. The Juvenile tray has an oblong worksurface, while the other models have a square worksurface. SIZE: The tray with straps, pad, and backstrap is available only in an adult size. The other models com

Ecovehicle Sledgehammer Series

The EcoVehicle is a personal electric vehicle designed for use by individuals with walking or balance disabilities or arthritis or limited stamina. This lower-speed vehicle does not require a driver's license for most applications. The frame and body panels are made of diamond-plate steel. All parts are protected against corrosion. Features include handrails on the outside, additional grab-handles inside, headlights, taillights and turn signals, seat belts, automotive safety glass windshield and

Edge Monoski

The Edge MonoSki is a mono ski and sit ski designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. The ski comes with a carbon fiber seat, a suspension system with a steel spring, a nylon web waist restraint, and a nylon web foot restraint. The user can select a small (13.5 inches), medium (14.5 inches) or a large (15.5 inches) bucket seat and ride height is adjustable.The following spring rates are available (weight necessary to move the spring 1 inc

Effect 5000

The Effect 5000 is an alternating air pressure mattress surface designed to prevent pressure sores for people with lower extremity, mobility, or severe physical disabilities or spinal cord injury. This mattress overlay is placed on the regular mattress on a bed. It comes in a single bed or hospital bed size. If placed on a king sized bed, it covers half the bed. POWER: Uses 110-volt AC. OPTIONS: 12-volt to 110-volt AC inverter for use in a van. WARRANTY: One year warranty.

Effortless Stretching Strap

The Effortless Stretching Strap is an exercise band designed for use by insividuals with mobility or upper extremity disabilities. Usable for individuals up to 6 feet, four inches tall, this strap is made of polypropylene webbing and is constructed as an adjustable single unit with loops at each end.

Eight-Ten Pac (Model Wh810)

The Eight-Ten Pac is an under seat pocket carrying accessory designed for use by individuals who spend long periods of time in a wheelchair. This carrying aid attaches to the frame of wheelchairs and hangs under the seat behind the user's legs. Features include SR-ADST Side Release Adapt A Straps system for quick attachment and detachment, and a large circular custom pull ring for easy detection and opening. This bag is made in the USA of highly durable nylon fabric with nylon tape bonded seams.

El Tucura Off-Road Trike

---- PROTOTYPE --------- PURPOSE: To design a prototype of an off-road hand-propelled tricycle for individuals with paraplegia or other mobility disabilities. The El Tucura ("the Grasshopper") is a hand-propelled trike that provides paraplegic users the opportunity to enjoy the thrill of off-road, downhill, mountain biking. The El Tucura’s crank handle drive allows hands to be free for steering while accelerating. The three 180-millimeter disc brakes and a 250-millimeter suspension provide add

El-E: An Assistive Object Fetching Robot For Human Environments

---- PROTOTYPE --------- PURPOSE: To design an assistive robot (El-E) that takes advantage of common flat surface structures in order to retrieve unmodeled, everyday objects for people with motor impairments. El-E is able translate its manipulator and associated sensors to different heights, which enables it to grasp objects on a variety of surfaces, such as the floor and tables, using the same perception and manipulation strategies. The robot can approach an object selected with the laser poin

Elastic Shoelaces

Elastic Shoelaces are designed for use by individuals who are unable to tie laces. The shoes are laced, the laces pulled to the desired tightness, and tied and the shoe can be treated as a slip on. The laces are available in wide or narrow. DIMENSIONS: The narrow laces are 3/16 inches wide and available in a choice of 24 or 26 inches long. The wide laces are 5/16 inches wide and available in a choice of 26 or 36 inches long. COLOR: Both styles are available in black, white, or brown.

Elastic Shoelaces

The Elastic Shoelaces are designed for individuals with arthritis or a disability that makes it difficult to perform fine motor skills. These elastic shoelaces stay in place and turn shoes into slip-ons. One set comes with three shoelaces.

Elastic Shoelaces (Models Da-5120-L-24 & Da-5121-L-32)

The Elastic Shoelaces are elastic shoe laces designed for use by individuals with arthritis or fine motor or mobility disabilities who have difficulty reaching or tying laces. These laces can be put in shoes and tied and the shoes can be used as slip-ons. WEIGHT: 25 grams (model DA-5121-L-32) or 17 grams (model DA-5120-L-24). COLORS: Brown, black, or white.

Elastic Waist Corduroy Pants (Model 101Ecx)

The Elastic Waist Corduroy Pants, model 101ECX, are trousers designed for use by men with physical disabilities or who have difficulty dressing. These pants feature a sewn-in elastic waist, mock fly, two front pockets, drawstring, belt loops, and a full cut in the seat and thigh. SIZE: 40, 42, and 44. DIMENSIONS: 34-inch inseam. COLOR: Black, navy, olive, or taupe.

Elastic Waist Pant (Model 016)

The Elastic Waist Pant, model 016, is women's slacks designed for use by individuals with catheters, mobility disabilities, spinal cord injury, or those having difficulty dressing. Available lined or unlined, these slacks are designed for ease in sitting as the material contours to the curve of the body leaving less bulk at the front making the back fuller and longer. Features include stretch fabric for comfort, a generous rise and inseam, and a 4-inch invisible zipper to accommodate catheter tu

Electra Ride Power Kits (Models 100 Deluxe, 200 Executive For Trikes, Series 3, & 200 Executive For Bikes)

The Electra Ride Power Kits are add-on power units for tricycles and bicycles designed for use by individuals with mobility disabilities, neurological disabilities, spinal cord injury, or arthritis. These kits mount to most adult tricycles or bicycles and enable risers to choose the amount of assistance required: total power, power-assisted pedaling, or standard pedaling with no power. The kits include the drive unit, battery, battery case, wiring, and all components. Tricycle drive units mount

Electric Can Opener And Knife Sharpener

The electric can opener and knife sharpener is a kitchen tool for teens and up, who have a hard time using a regular can opener. This product would be ideal for those who have a disability that affects their motor skills and for persons with arthritis. Twist-Off cutting lever for easy cleaning. Built-in manual knife sharpener. Cord storage. Opens cans up to 6 ½ inches height. COLOR: White. DIMENSIONS: 8 ½ inches height x 4 3/8 width x 4 5/8 depth.

Electric Carrier & Carrier Cover Package (Models Wc210M-52 & Wc211M-52)

The Electric Carrier, model WC210M-52, is a Class 3 hitch mounted carrier for scooters or power wheelchairs. The lift is equipped with an electrical-operated screw jack that is activated by a switch. The power unit comes with a single wire that can be attached directly to the vehicle's electrical system or wired to a trailer plug. The power unit has built-in night lights which are switched on and off with a hidden push button under the red access cap. An emergency crank is also supplied to lower

Electric Height Adjustable Activity Table

The Electric Height Adjustable Activity Table is a powered height adjustable work table designed for use by individuals who use wheelchairs. Height adjustment is achieved with push-button controls. Both models have a laminate top and an extruded aluminum base. DIMENSIONS (HxLxW): 27 to 39 x 48 x 30 inches or 28 to 34 x 60 x 30 inches. COLOR: Maple top. WARRANTY: Two-year warranty.

Electric Holdown (Model 128)

The Electric Holdown, model 128, is wheelchair restraint system that may be installed for the driver or passenger wheelchair position. (Installation depends on the underside of the van.) The holdown consists of two pieces: one piece hooks to the wheelchair frame behind the casters, and the second mounts into the floor of the van. The floor mounted piece clamps onto the piece attached to the chair. The control switch mounts to the vehicle's dashboard or the most convenient position for the operat

Electric Work Table (Model 4375)

The Electric Work Table, model 4375, is a powered height adjustable work or therapy table designed for use by wheelchair users. This height-adjustable table has a direct-drive lift mechanism that elevates the tabletop and a pedestal design that allows wheelchair access, and a hand-control panel mounted on the underside of the tabletop. The table has a high-pressure laminate top with a natural oak finish and protective molding along the edges. It can can accommodates two wheelchairs and up to fiv

Electrical Switches

DO IT YOURSELF" ENTRY --- PURPOSE: Switches for use by individuals with mobility or neurological disabilities. Mel Nowland, a retired engineer, has designed many types of electrical switches for people with limited mobility, using easily found materials such as soap dishes and Tupperware, including eye-blink, two-handed, voice-operated, and pillow switches. AUTHOR: Wechsler, K. TITLE: Doing It Yourself. JOURNAL: Quest. WEB SITE: http://www.mda.org/publications/Quest/q113diy.html. REF: Vol. 11, N

Electrically-Assisted Human-Powered Vehicle

A multi-purpose four-wheeled two-passenger electrically assisted human-powered vehicle (EHPV) prototype is created to be used by people with physical disabilities, such as a person who does not have full strength in his or her legs. Additionally, the EHPV can also be used as a rehabilitation device, where an instructor can aid in pedaling the vehicle. The EHPV also functions as an alternate form of transportation for the environmentally conscious consumer, and is suitable as a recreational vehi

Elegs

---- PROTOTYPE --------- PURPOSE: To design a prototype of a wearable, artificially intelligent device that provides power and assists individuals with paraplegia to stand and walk. The eLEGS is an exoskeletal orthosis for the legs that provides support for standing and and initiates leg movement. eLEGS has a unique knee flexion that provides a natural human gait that allows it to handle mixed terrains and reach speeds in excess of 2 miles per hour in certain conditions. It consists of two frame

Elevated Bathtub Seat

Elevated Bathtub Seat is designed for children and adults with physical disabilities who have difficulty sitting in a tub or standing in a shower. The open front and coccyx dimple in the back provide access for personal hygiene. Additional features include smooth, rounded corners for comfort, a finger indent handle for transport and suction cup feet for stability. DIMENSIONS: 13 x 15 ½ x 8 1/2” (33 x 39 x 22 cm) CAPACITY: Supports up to 400 lbs. (181.8 kg) WEIGHT: 4 ½ lbs. (2kg) WARRANTY/GUA

Elevated Crib

CUSTOM ADAPTATION PURPOSE: To enable an individual with a spinal cord injury to care for her baby. A standard wooden crib with a drop front was purchased and adapted. First the legs were exended using matching wood to provide the necessary wheelchair clearance. The drop front was then removed and cut in half to form two gates. Once the front corner posts were reinforced with steel brackets, the gates were attached with swinging bar hinges. The gates stay open until they self-close after an init

Elevated Push-Up Toilet Seat With Armrest ( Modelw38878 )

The Elevated Push-Up Toilet Seat with Armrest, model W38878, is an elevated toilet seat designed for use by individuals with balance or mobility disabilities or arthritis. This toilet seat is designed to help users to lower or push themselves up from a toilet seat with the added on elevation and armrests. The seat fits most standard toilet seats. Mounting hardware is included. Features include extra width between armrests and lateral gripping slots. DIMENSIONS: Width between armrests is 20.25 i

Elevated Toilet Seat With Arms (Models 1156A & 1156B)

The Elevated Toilet Seat with Arms is an elevated toilet seat designed for use by individuals with arthritis, lower extremity disabilities, or mobility disabilities. The seat has built-in arms on both sides, and can be installed without tools on a standard toilet (model 1156A) or an elongated toilet (model 1156B). COLOR: White. CAPACITY: 300 pounds. WARRANTY: Limited lifetime warranty.

Elevated-Arm Lateral Support (Models 706020 & 706021)

The Elevated-Arm Lateral Support is a combination lateral trunk support and elevating armrest designed for use by individuals who use wheelchairs or geri chairs. This support, which comes with a launderable synthetic sheepskin cover, helps reduce leaning to one side while permitting the arm to be elevated to control edema. Model 706020 is a right-handed model and model 706021 is a left-handed model. DIMENSIONS: Both models are 12.75 inches high at the lowest point.

Elevating Wheelchair

---- PROTOTYPE --------- PURPOSE: To create a prototype of a elevating wheelchair which allows individuals with mobility disabilities to access items out of vertical reach and/or to have visual access to items that could be seen by an individual standing. Two students focused on this problem for a final year project. Their answer is to lift the wheelchair and/or the occupant. The detailed answer is in a 130 page formal engineering report with 13 AutoCAD drawings to support the idea. The base was

Elevator

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with mobility or neurological disabilities to enter a back porch without climbing the porch stairs. Two metal sliding uprights were bolted to the concrete floor of the porch and anchored to the underside of the roof overhang. The actual elevator was built of square tubing with a platform to stand on. A screen was placed on the elevator floor to provide a nonslip surface. A switch was wired in and a safety gate was attached. The elevator i

Elevator 350 Patient Lift

The Elevator 350 Patient Lift is a seat lift designed for use by individuals with balance, standing, mobility and walking disabilities or arthritis or spinal cord injury. This wheeled lift is lightweight and intended as an aid in lifting a person from floor level to a maximum height of 30 inches and transporting him or her, while seated, over short distances. It can be used in the home or in institutions. The lift's frame is constructed of powder coated, scratch resistant aluminum. It also featu

Elevator 700 Patient Lift

The Elevator 700 Patient Lift is a seat transfer lift designed for use by individuals with balance, standing, mobility and walking disabilities or arthritis or spinal cord injury. This wheeled lift is lightweight and intended as an aid in lifting a person from floor level to a maximum height of 31 inches and transporting him or her, while seated, over short distances. It can be used in the home or in institutions. The lift's frame is constructed of powder coated, scratch resistant aluminum. It a

Eliminator & Eliminator X

The Top End Eliminator and the Eliminator X are racing wheelchairs that are designed with aerodynamic frames and lower center of gravity for athletic individuals who use a wheelchair and wish to compete. Each bike comes standard with a helmet and tool kit. FRAME: The frame is made of custom 6061 T6 Aluminum T-frame. There are three cage designs: V, open-V, ar I-cage. The Eliminator X has a one-sided triagular fork. Overall length measures 56 to 66 inches in two inch increments. STEERING: Custom

Eliminator, The

The Eliminator is an airless cushion innertube designed for flat free use. It is lightweight, easy to install and shock absorbent. The arched web in the tube's interior protects from overload and permanent deformation. It may be used with standard tires of wheelchairs and bicycle tires, and can be reused when the tire wears out. DIMENSIONS: From 8 x 1.25 inches to 24 x 1 3/8 inches, at least 17 different sizes listed. WEIGHT: Can support over 200 pounds. WARRANTY: 2 year limited. COLOR: 14 avail

Elite

The Elite is a 3-wheeled scooter designed for indoor and outdoor use by individuals with lower extremity and mobility disabilities. FRAME (LxWxH): 43 x 22 x 37 inches, foldable for transport or storage. The Elite has an underbody ground clearance of 3.65 inches and a turning radius of 35 inches. Available colors are red, blue and silver. A detachable basket located under the seat is included. CONTROLS: An analog battery gauge and a battery indicator light are located at the top of the tiller bet

Elite Wheelchair

The Swede Elite is a lightweight manual wheelchair designed for use by adults with mobility disabilities. FRAME: Rigid titanium; available in black, seagreen, plum, lilac, blue, or red. SEAT: Seat width available from 14 to 18 inches; seat height is adjustable; seat depth is adjustable from 14 to 16, or 16 to 18 inches. Seat angle ranges from 3 to 10 degrees. Backrest is foldable. UPHOLSTERY: Detachable, washable nylon velour; black. ARMRESTS: Optional. BRAKES: Medium mounted. CASTERS: 5 or 6 in

Elite Winding Drum Home Elevator

The Elite Winding Drum Home Elevator is a home elevator designed for use by individuals with mobility disabilities. It has a winding drum drive with a nominal operating speed of 40 feet per minute, programmable solid state controls, an A-style Sierra prewired cab, and two to five stops with up to 50 feet of travel. The machine is installed either adjacent to the elevator shaft or overhead. POWER: Uses household current with battery for emergency lowering and lighting. DIMENSIONS: Available with

Elliot Elephant (Model 9307)

Elliot Elephant, model 9307, is a switch operated toy designed for use by children with upper extremity, mobility, or severe physical disabilities or spinal cord injury. When the child activates a capability switch (not included) this plush toy elephant will sing and sway to the song “Do Your Ears Hang Low” while its ears flap up and down. The toy also works without a switch. POWER: Uses 3 AA batteries. DIMENSIONS (HxW): 10 x 7 inches. WEIGHT: 2 pounds.

Elmira Elevator

The Elmira Elevator is a home elevator designed for use by individuals with mobility disabilities or spinal cord injury. This compact elevator fits virtually any new or existing home or floor plan. It is available with custom cab configurations. Integrated safety locks protect against the door opening without cab present. POWER: Uses electrical current. An emergency 24-volt direct current (DC) battery backup provides lowering, lighting, and door unlocking in the event of a power outage.

Elongated Wall Hung Top Spud Bowl (Models 25-030 & 25-031)

The Elongated Wall Hung Top Spud Bowl, model 25-030, is a tall toilet designed for use by individuals with mobility disabilities. This toilet has a wall waste outlet, a spud for the flushometer valve, and a siphon-jet. The vertical rough in (the distance from the floor to the center of the waste drain) can be adjusted to increase the height of the installed toilet. Model 25-031 has a bedpan rim. A seat is not included. DIMENSIONS (HxDxW): 13 x 25.5 x 14.5 inches. The vertical rough in is 7.25 in

Elvoron Mr In-Line Drive Home Elevator

Elvoron MR In-Line Drive Home Elevator is an interior elevator designed to provide multi-level access in private residences for people with limited mobility, mobility disabilities and spinal cord injuries. There is a choice of two drive systems available; hydraulic or in-line (machine room-less). The hydraulic drive system offers a control system and a quiet operation. An area outside the elevator hoist-way is required to accommodate the controller and the hydraulic pump unit. This area can b

Emergency Chair (Model 400)

The Emergency Chair, model 400, is an emergency evacuation carrier designed for the quick evacuation of individuals with severe physical disabilities and cognitive disabilities from multi-floor buildings. It is designed to go both up and down stairs with the ability to quickly change directions in the event of an obstruction. There are multiple points of lift and it negotiates stairs easily. Made of fire-retardant material, it is equipped with built in leg straps and a harness for secure transp

Emg Retrainer

The EMG Retrainer is an EMG feedback unit for muscle re-education for individuals with neurological disabilities and motor disabilities. The EMG Retrainer measures and quantifies muscle movement with the results displayed on a liquid crystal display (LCD). It can be programmed to assess the activity of healthy and damaged muscle. This dual channel unit is designed to continuously monitor muscle movement, providing visual and auditory feedback. Standard features include a menu-based system for ea

Emma Poncho

The Emma Poncho is a poncho designed for use by individuals with upper extremity, lower extremity or mobility disabilities or arthritis. Designed to be easily put on or taken off, this poncho is made of a wool and acrylic blend. It is lightweight and features a large front pocket and is machine washable. COLORS: Black and grey stripes.

Empower Walk-In Bathtub

The Empower Walk In Bathtub is an accessible bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. This walk-in tub is the length of a standard bathtub, with a side door and a contoured bath seat. After entering the tub and sitting on the seat, the user turns a handle to seal the door and open the taps. After the tub is filled, the user presses a button to be gently lowered into the water. After bathing, the user presses the button again to be raised

Emt Link

EMT Link is an emergency alert system with monitoring service designed for use by seniors or individuals with mobility or severe physical disabilities or spinal cord injury. This personal emergency response system (PERS) allows the user to send an alarm and request assistance by pressing a button on an automatic calling console unit or a hand-operated radio transmitter. A telephone connection is established automatically with the SafetyCare Response Center. A third button on the console can be p

Emu Max

The EMU-Max is a three wheeled mobility scooter designed for use by individuals with lower extremity or mobility disabilities. This scooter offers the user the option of sitting or standing while riding. The EMU-Max's special standing design offer users eye-to-eye contact with individuals who are standing upright. FRAME: The EMU-Max is constructed of a white and chrome finish frame. It has collapsible, height adjustable handlebars; front LED headlight; rear tail and brake lights, left and right

Endoflex Back

Contoured back with internal metal frame. Mounts in wheelchair frame with back hooks with nylon straps and buckles. Back height and back angle adjustable. Mid-back can flex or be fixed in one position. Vinyl or fabric. .

Endorphin Double Wall Pulley (Wall Mount) (Model 306)

The Endorphin Double Wall Pulley (Wall Mount), model 306, is a weight exercise machine designed for use by individuals with spinal cord injury or lower extremity, mobility, or upper extremity disabilities. This unit offers a total body workout from either a standing or seated position. The high and low pulley stacks are designed to increase upper and lower body strength. Made of tubular steel, the unit comes with two-single grip handles and two 75-pound (34 kilogram) pin-select weight stacks in

Endurance Aluminum Crutches (Models W 4000, W4001, W4002, & W4003)

Endurance Aluminum Crutches are axillary crutches designed for use by individuals with lower extremity and walking disabilities. These lightweight anodized aluminum crutches have a reinforced center tube, an unbreakable silencing collar, and rubber tips, hand grips, and underarm pads. These crutches also feature one-button height adjustment and an easy-to-read calibrated height scale for adjustment to a wide range of heights. SIZES: Model W4000 is a child's model (for users four feet to four fee

Endurance Heavy Duty Walker (Model W1800)

The Endurance Heavy Duty Walker, model W1800, is a height-adjustable rollator-style folding wheeled walker with seat designed for use by large individuals with walking or balance disabilities. This walker has a wide base for stability and features a padded, flip-up hinged seat; an adjustable back strap for seated security ; four mag wheels with flat-free tires and ball bearings; a clear tray; and a large storage basket under the seat. The unit is equipped with loop brakes on the handle bars. DIM

Endurance Lightweight Folding Walkers (Models W1100 & W1200)

Endurance Lightweight Folding Walkers are folding adjustable folding walkers designed for use by individuals with walking disabilities. Model W1100 is the Junior Folding Walker and is designed for users four feet, ten inches tall and up. Model W1200 is the adult model. Both models have lightweight anodized aluminum frames with chrome-plated steel cross bars, single-button release for opening and folding, and foam handgrips. OPTIONS: Three- or five-inch fixed wheel attatchments, three- or five-in

Endurant Receptor Ramp

The Endurant Receptor Ramp is a shower ramp designed to make shower stalls accessible to individuals with mobility or lower extremity disabilities or spinal cord injury and others who use wheelchairs. The ramp offers a transition between the floor and a BioPrism shower base receptor (sold separately). The ramp has a non-skid, textured surface which helps prevent slips and falls. It is manufactured from a solid pour of BioPrism solid surface. DIMENSIONS (WxL): 12 inches wide; up to 72 inches long

Enduroline E-Z Lock Quik-Fit Trays (Models 33003P, 33004P, 33005P, 33020P, 33003, 33004, 33005, & 33020)

The Viewline E-Z Lock Quik-Fit Trays are lap trays designed for use with wheelchairs. These trays feature an E-Z Lock Clamping System that adjusts for standard or thick arm pads, enables the tray to slide on to the armrests from the front, and secures the tray with a simple locking motion. These trays are made of melamine-impregnated fiberboard. Models 33003P, 33004P, 33005P, and 33020P have a black PVC rim. The other models do not have a rim. SIZES: Child (fits wheelchairs 12 to 14 inches wide)

Enduroline Plus Trays (Series 31200)

The Enduroline Plus Trays are lap trays designed for use with wheelchairs. These trays are made of melamine-impregnated fiberboard. These moisture-resistant trays can be attached using the E-Z Lock Clamp, Top Drop Clamp, Tube Arm Braxkets (not included), or other attaching system. Models include the tray only, tray with hook-and-loop attaching straps, tray with a PVC rim, and tray with straps and rim. SIZES: Child (fits whe