Walker Accessories

Results: 190

14-Inch & 16-Inch Walker Bags (Models 70100 & 70120)

The 14-inch and 16-inch Walker Bags, models 70100 and 70120, are carrying bags for attachment to the side or front of a walker. These lined bags are made of coated nylon Cordura and have quick release clips. The opening is made of a spring hex frame which requires very little manual dexterity or strength to operate. Opening the bag is achieved by placing the fingers in the middle of the frame and popping it outward; by pushing on the outside of the frame, the bag snaps shut. DIMENSIONS (HxWxD):

3 Inch Swivel Rubber Swivel Wheel Casters With Glide Brakes.

Casters for the front legs of standard Guardian walkers. 3 inches diameter, thermoplastic rubber tires won't mar floors. Standard rear glide brakes are provided for stopping.

3-Inch Single Fixed Wheel Attachments With Rear Glide Tips (Model 6270) & 5-Inch Single Fixed Wheel Attachments With Rear Glide Tips (Model 6271)

The 3-inch Single Fixed Wheel Attachments with Rear Glide Tips, model 6270, and the The 5-inch Single Fixed Wheel Attachments with Rear Glide Tips, model 6271, are wheeled leg attachments for walkers designed to convert standard walkers to wheeled walkers. Both models fit Invacare walkers and have easy-to-clean polypropylene wheel rims and non-marring thermoplastic rubber tires. The wheels and bearings are corrosion protected. WARRANTY: Limited lifetime warranty.

3-Inch Swivel Wheels With 13-Inch Rear Leg Extensions With Glide Tips (Model 6269), 3-Inch Swivel Wheels With 13-Inch Cambered Sure Glide Brakes (Model 6272) & 3-Inch Swivel Wheels Attachments With Rear Glide Tips (Model 6273)

The 3-inch Swivel Wheels with 13-inch Cambered Sure Glide Brakes, model 6272, are wheeled leg attachments for walkers designed to convert standard walkers to wheeled walkers. This set includes front swivel wheel attachments and rear leg attachments with cambered brakes. The 3-inch Swivel Wheels Attachments with Rear Leg Extensions with Glide Tips, model 6269, has the front swivel wheels attachments, rear leg extensions, and glide tips to replace the standard tips on the rear walker legs. The 3-i

3-Inch Wheeled Footpiece (Models 7729 & 7731)

Three inch nonswivelling wheels to replace front legs of Guardian Safe T Fold walker. Model 7731 for adult and youth sizes. Model 7729 for child and toddler sizes.

5-Inch Swivel Wheels With 13-Inch Cambered Sure Glide Brakes (Model 6268) & 5-Inch Swivel Wheels Attachments With Rear Glide Tips (Model 6267)

The 5-inch Swivel Wheels with 13-inch Cambered Sure Glide Brakes, model 6268, are wheeled leg attachments for walkers designed to convert standard walkers to wheeled walkers. This set includes front swivel wheel attachments and rear leg attachments with cambered brakes. The 5-inch Swivel Wheels Attachments with Rear Glide Tips, model 6267, has the front swivel wheels attachments and glide tips to replace the standard tips on the rear walker legs. Both models fit Invacare walkers and have easy-to

6922 Grip Covers

The 6922 Grip Covers are handgrip cushions for crutches, cane handles, and walkers. These spongy pads are made of 1/4-inch thick ventilated foam. DIMENSIONS: 6 inches long; fits handle diameters up to 1 inch. COLOR: Black.

Ableware 703190050 Deluxe Wire Walker Basket with Stabilizing Bars

The Ableware Deluxe Wire Walker Basket with Stabilizing Bars is plastic coated. Two hooks support the basket while two easy to bend, vinyl coated aluminum stabilizing strips keep it from swinging. The strips permit attachment to nearly all walker models. It features a heavy duty white plastic insert tray that has one large compartment, a coin or medication holder and a round compartment for a glass, can or cup. 

Ableware 703192000 Economy Walker Basket with Hook-and-Loop

Plastic-coated wire basket can be attached to most walkers and features a heavy duty clear plastic tray that has one large compartment, a coin or medication holder and a round compartment for a glass, can or cup.  

Ableware 703200050 Walker Bag Hook by Maddak

Creates a convenient spot on a walker to hang a bag or purse. Simply attach the clamp around the walker and hang a purse or bag on the hook. Can also be used on most standard bed rails. Clamp can be adjusted to accommodate tubing diameters of 1/2 to 1 1/8" (1.27 - 2.9 cm).  

Ableware 703220051 Double-Sided Quilted Walker Tote Bag-Printed Burgundy

Double-Sided Quilted Walker Tote Bags  hangs over walker crossbar Quilted decorative cotton tote bags have front and back pockets that are held in place by hook-and-loop closures. Is designed for people with fine motors disabilities.   

Ableware 703230000 Star Glide 1"

Nylon glides for wheeled walkers reduce friction and self-align with the floor to allow for easier movement of the walker. it is designed to be simple to use and easy to install by removing the rubber tips from the walker legs and replace them with Star Glides.

Ableware 703230001 Star Glide Walker Slides-1 1/8"

Star Glide Walker Slides are for wheeled walkers to reduce friction and self-align with the floor to allow for easier movement of the walker. To install, remove the rubber tips from the walker legs and replace them with Star Glides.

Ableware 703230010 Walker Glides

Walker Glides are intended for people who use walkers. For use on wheeled walkers Makes it easier to manipulate the walker For use on the rear legs of wheeled walkers. Enable smoother movement over a variety of surfaces. One size adjusts to fit most walkers. Sold in pairs.

Ableware 703230011 Walker Balls

Ablewar Walker Balls are designed for people that use a walker. It is an alternative to rubbed glides. Allow for effortless, scuff-free movement across floors. Felt covered rubber balls are ready to use and simple to install. Fit most walkers. Sold in pairs.

Ableware 703260000 Cane Hand Loop

The Cane Hand Loop is designed for people with disabilities that use a cane. One end wraps around the cane/walking stick shaft while the larger loop on the opposite end slips around the wrist. Even if the cane falls out of the hand, it won t drop to the ground. Made of  polypropylene webbing.

Ableware 703270000 Hand Band Grip Enhancer-Small-2/pack

Gives people with limited grip and hand strength additional control of walkers and canes. Band attaches to the handgrips of the walker or the cane shaft using hook-and-loop fastener. The user places the fingers in the band creating an enhanced grip. The elasticity in the band provides greater control and ensures a secure grip. Also useful for products that require a firm grip and swinging motion such as gardening tools, brooms and mops.  

Ableware 703290001 Crutch Bag-Vinyl-Black

Crutch Bag-Vinyl-Black  bag is designed to make it easier for users to carry personal items while using crutches. The deep pocket provides room to hold a cell phone, keys, wallet, etc. It attaches to the side of the crutch and does not interfere with any movement. Machine wash, air dry. 

Ableware 703300001 Cotton Tote Bag for Walkers and Wheelchairs

The cotton tote bag is intended for use by people that have a walking assistant such as walker or wheelchair, and is designed for keeping personal belongings safe and close by. Easy to use clips make it simple to attach and remove. Includes a sewn in key ring, side pocket for easy access to often used items and a carry strap that enables the user to hold the bag when it is detached.  

Ableware 703340010 Quilted Folding Cane Bag w/ Strap

The Quilted Folding Cane Bag w/ Strap is intended for people who have a cane. It is a bag with sufficient space to carry a folded cane. The quilted inside is designed to protect the cane.   

Ableware Crutch Bag

The Ableware Crutch Bag is a carrying bag for a crutch designed for use by individuals with walking or balance disabilities. This carrying bag has a deep pocket for carrying personal items, and a smaller front pocket that provides storage for items such as cell phones, wallets or keys. The bag attaches to the side of the crutch and will not interfere with movement. This bag can also be used with walkers. The bag can be machine washed and dried. DIMENSIONS (LXWxD: 9 x 6.5 x 2 inches. COLOR: Blac

Adaptive Tote Bag

The Adaptive Tote Bag is a wheelchair back pouch or a carrying bag for a walker designed for use by individuals with balance, walking, or mobility disabilities. Closed, this bag has the appearance of a knapsack. with two hook and loop attaching straps, a flap top, an outer trash receptacle or open pocket and a tissue holder. Inside is a zippered money holder with zipper pull, two pen/pencil holders, and three additional pockets. The bag is made of washable Codura nylon. DIMENSIONS (HxWxD): The b

All Terrain Walkaroos

These All Terrain Walkeroos are designed for individuals who use walkers to get around. The Walkaroos are supportive tips for walkers. They glide and move smoothly across carpet and floors while offering stability. Easy to install: remove old cap, put Walkaroo on and twist in place to secure. Comes in sets of 2. Designed not to catch on or mark flooring. Made of high density polyethylene. Non-porous material decreases chance of spreading harmful germs. Comes in a set of 2.

Apron For Walker

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Apron with pockets which ties onto a walker to help carry small objects. Drawing with instructions on sewing a carrier bag to tie on a walker, with pockets on the inside and outside. SKILLS REQUIRED: Sewing. AUTHOR: Independence Factory TITLE: Make it Cheap: Volume 3 REF: Middletown, Ohio: Independence Factory NARIC CALL NUMBER: R1183 PAGES (including cover): 2 1980.

Balance Ring Attachment (Model 6068)

Metal body support ring covered with foam padding and Naugahyde. Opens for entry or exit. Adult ring size 14 1/2 by 17 1/2 inches, height adjusts 12 inches. Junior ring size 12 1/2 by 10 1/2 inches, height adjusts 8 inches. No further description given.

Cambered Sure Glide Brakes (Models 6274 & 6263)

The Cambered Sure Glide Brakes are rear brake attachments designed for use with 3- or 5-inch single fixed wheel attachments (sold separately). These brakes operate without interfering with the normal use of the walker. DIMENSIONS: Model 6274 are 10-inch extensions and model 6263 are 13-inch extensions.

Cane Holder For Walking Frames

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted walker modification that allows an individual with balance, mobility and walking disabilities to easily carry and store a walking stick or cane to their walker. An elderly gentleman uses his walker with seat for extra support and the chair portion when he needs to rest. When shopping in some of the more crowded shops at the mall, the gentleman realized that being able to park his walker outside the store and use his cane fo

Cane Tube

The Cane Tube is designed for individuals who use a walker or rollator. The Cane Tube is the tool-free cane holder that uses gripper clips to snap onto walkers, rollators.

Canvas Walker Seat (Model W1218)

The Canvas Walker Seat, model W1218, is a seat for a walker designed for use by people with mobility and balance disabilities. Designed for use on walkers with dual front crossbars. this seat installs on four points of the frame and folds out of the way when not in use. CAPACITY: 250 pounds.

Carex Canvas Walker Basket

The Carex Canvas Walker Basket is a carrying bag designed for use by individuals who carry items when using a walker. The bag attaches to the walker with elastic straps to hold items upright. Other features include a large space for personal items, collapsible hinges for travel and flat storage, and a privacy cover that keeps personal items protected and concealed. This bag fits most walkers. DIMENSIONS (HxDxW): 7.75 x 6 x 16.5 inches. WEIGHT: 0.5 pounds.

Carex Ultra Ride Rollator Transport Chair

The Carex Ultra Ride Rollator Transport Chair is a rollator and transport chair in one, designed for individuals who have walking disabilities and persons who can safely use both a walker and a transport chair. Adjustable locking brake handles. Large capacity storage bag. Wide backrest; seatbelt included. Folding footrest. Shipping/Handling is $14.80-$45.80.

Carry All Pouch For Walker (Model 1116)

The Carry All Pouch for Walker, model 116, is a carrying bag made of blue denim designed to attach to the side of a wheelchair or walker. The pouch has one inside pocket and 3 outside pockets with velcro closures.

Carry All Walker Bag

The Carry All Walker Bag is a carrying bag for walkers designed for use by individuals with walking or balance disabilities and seniors. Designed to fit over the front bar of a walker, this bag is held in place at the top and bottom with hook and loop closures. It has a zippered front compartment for storing small personal items and two front open pockets for easy access. The zippered pocket has a ring-type zipper pull for ease in opening. Other features include a large, opened back-side pocket

Carrying Basket (Model 7715)

Large vinyl coated wire basket attaches with hooks to the top of the walker frame. Easy to remove or install.

Carrying Pouch (Model 7719)

Zippered carrying pouch attaches to the top of the walker frame with velcro straps. Three side pockets and a large central storage area. Washable fabric.

Chair Sox

The Chair Sox are furniture tips designed for use by individuals with cognitive or emotional disabilities and balance disabilities. These non-slip furniture tips are designed to eliminate distracting noise of shuffling chairs and desks in a classroom setting. These tips come pre-cut and ready to assemble by slipping them over the feet of chairs or desks. The tips fit all standard classroom-style chair and desk legs. They can also be used as walker tips.

Cjt Tag-A-Long

The CTJ Tag-A-Long is a carrying aid for communicator or laptop/notebook computer support designed for use by individuals who use walkers. This tray attachment enables the user to mount a communication device or laptop computer to a reverse K-style walker without inhibiting the mobility or balance of the walker. The unit can be modified for carrying dual bags for personal belongings, small ventilators, or other items. The unit attaches to the rear of the walker using the TSP clamping system. It

Clear Plastic Tray

The Clear Plastic Tray is a tray for a walker designed to carry small items inside a walker basket. Made of molded plastic, the tray consists of three separate compartments specially designed to hold books, glasses, coins, medications, and a drinking glass, can or cup. DIMENSIONS: The largest compartment in the tray measures 8.5 inches x 3.75 inches x 2 3/8 inches deep (22 x 9 x 6 centimeters).

Combo Walker / Wheelchair Bag (Model 6434)

The Combo Walker/Wheelchair Bag is a carrying bag or caddy for use by people who use wakers or wheelchairs. The denim bag features four pockets ataches to the front walker bar or wheelchair arm using the attached straps. DIMENSIONS: 13 x 9.5 inches. COLOR: Blue.

Comfort Pads

The Comfort Pads are walker handgrip pads made of foam. These pads attach with Velcro and have a washable terry cloth cover. DIMENSIONS: 6 x 8 inches.

Comrade

Carrying bag for walker attaches to front bar of walker with velcro. Two pockets, one on either side of bar for balance. Interior pocket for small items. 12 inches long by 8 inches deep. Black or saddle. Vinyl.

Crutch Handgrip Covers

The Crutch Handgrip Covers are crutch handgrip cushions or walker handgrip pads designed for use by individuals with lower extremity, balance, or walking disabilities. These handgrip cushions are intended to help reduce pressure and chafing. Made of plush fleece fabric, these handgrip cushions have Velcro-style closure and are designed to fit all underarm crutches and most models of walkers. COLORS: Black, cobblestone, moss green, grape ape, peek-a-blue, orange fuzz, or tickled pink.

Crutch Handgrips

The Crutch Handgrips are handgrips designed for use on most crutches. These cushioned grips help provide comfort for individuals using ctutches. The grips are washable and persperation resistant.

Crutch Splints For A Quadriplegic Child.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Molded plastic finger splints to allow a quadriplegic child with no active finger motion to hold on to and propel crutches. Describes finger splints and provides a drawing and photographs of how they work. SKILLS REQUIRED: Plastics. AUTHOR: Carter, C TITLE: Crutch Splints for a Quadriplegic Child JOURNAL: American Journal of Occupational Therapy REF: Vol 33 no 8, Aug 1979: p 527-528 PAGES (including cover): 2 1979.

Crutcheze Walker Padded Handgrips

The Crutcheze Walker Padded Handgrips are handgrips for walkers designed for use by individuals who have balance or walking disabilities and others who use walkers. Made of foam premium padding and stretch, anti-bacterial fabric, these contoured pads fit all standard walker handgrips. The padded covers wrap around the walker handles and are held in place by hook and loop closures. The pads are reversible with a design that is sensitive to body weight to alleviate hand stress and sensitive to pre

Crutcheze Walker Side Bag

The Crutcheze Walker Side Bag is a carrying bag for walkers designed for use by individuals with walking or balance disabilities. This carrying bag has a stretchable pouch with an interior liner pocket to keep personal items such as wallets, electronic devices and water bottles. Other features include removable adjustable straps and side loops and hooks that allow the user to attach the bag to the side of the walker or bedrail for ease of access. The bag is made of durable stretch fabric that is

Deluxe Walker Basket With Stabilizing Bars

The Deluxe Walker Basket with Stabilizing Bars is a wire basket for walkers designed for use by individuals with mobility disabilities. This plastic-coated wire basket hooks over the walker's center bar and a stabilizer strip extends from each side of the basket to the upright to prevent the basket from swinging. The basket also features a heavy-duty clear plastic liner tray with one large compartment, a coin or medication holder, and a cup or can holder. DIMENSIONS: 5.5 x 16 x 7 inches.

Denim Arm Walker Pouch (Model 16C188A)

The Denim Arm Walker Pouch, model 16C188A, is a carrying bag for walkers designed for use by individuals with walking or balance disabilities. This pouch has a large full width pocket in the denim section and three pockets in the front section. The pouch attaches to a walker's cross bar with a Velcro closure. DIMENSIONS (DxW): 8 x 13 inches. COLOR: Blue denim with white front panel.

Depends Holder Bag (Model St107)

The Depends Holder Bag, model ST107, is a carrying bag designed for attaching to a wheelchair for individuals who use a wheelchair. This bag provides easy on/off handling and is made from light weight canvas. OPTIONS: Silk screening with your logo or message in a variety of colors is available upon request. DIMENSIONS: 16 x 24 with a 5.5 inch gusseted bottom. COLORS: Body color comes in natural. Assorted webbing and trim colors are available.

Diestco Deluxe Walker Bag

The Diestco Deluxe Walker Bag is a carrying bag for walker designed for use by individuals with walking or balance disabilities. Made of water-resistant nylon, this bag attaches to the side of the walker using four attachment straps. This bag has a side pocket with hook-and-loop closure, a front zipper pocket, front and side mesh pockets, and a back pocket. DIMENSIONS(WxLxD): 9 x 12 x 3 inches.

Diestco Large Front Walker Bag (Model 5412)

The Diestco Large Front Walker Bag, model 5412, is a carrying bag for walker designed for use by individuals with walking or balance disabilities. Made of water-resistant nylon, this bag attaches to the front of the walker using straps. This bag has a large pocket in back and two front mesh pockets. DIMENSIONS(WxLxD): 17 x 12 x 2 inches.

Diestco Standard Walker Bag

The Diestco Standard Walker Bag is a carrying bag for walker designed for use by individuals with walking or balance disabilities. Made of water-resistant nylon, this bag attaches to the side of the walker using four attachment straps. This bag has a flap cover with hook-and-loop closure.

Diy Mounting Board For Walker

---- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself mounting board for walker with a seat. A piece of band iron is attached to the support bard of the walker. Then attach the board to the support bar on the walker using the bolts, nuts, and washers. The size of pipe holders, bolts, nuts, and washers depends on the cutting board being used. Finally, industrial strength Velcro is used to attach the Vantage to the board. MATERIALS: Hard plastic cutting board with rubber trim, 2

DIY Seat For a Walker

DIY Seat for a Walker is designed for use by individuals who have walking disabilities and use a walker for mobility. It is designed to provide a seat to rest during ambulation.

Do It Yourself Walker Seat

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: The DIY Walker Seat allows those who don't have a walker seat attachment or a seat nearby, sit and relax when he or she needs rest. Nylon webbing, steel rings and basic stitching aid in the creation of this seat. COMMENTS: Certain walkers do not come standard with a seat attachment, making it difficult for those who need frequent rests to utilize their walker effectively.

Double-Sided Quilted Walker Bag (Model F703220050)

The Double-Sided Quilted Walker Bag, model F703220050, is a carrying bag for walker designed for use by individuals with mobility, walking or balance disabilities. Made from a durable poly/cotton blend, this bag drapes over the center bar of a walker, and it has front and back pockets to hold personal items. The bag is secured with hook-and-loop closures. DIMENSIONS (LxWxD): 15.5 x 6.5 x 1.5 inches. The pockets are 13 x 10 inches. COLORS: Available in blue and burgundy prints or gray and burgund

Double-Sided Quilted Walker Tote Bag

The Double-Sided Quilted Walker Tote Bag is a carrying bag for a walker designed for use by individuals with mobility disabilities. This cotton bag drapes over the center bar of the walker and has a large pocket on each side. The bag is secures with hook-and-loop closure and is machine washable and dryable. DIMENSIONS: The pockets are 13 x 9 inches. COLOR: Available in patterns or solid colors.

Drink Holder

The Drink Holder is a wheelchair drink holder designed for use by individuals with lower extremity, mobility or walking disabilities or spinal cord injury. The unit consists of a stainless steel frame with a clamping system for attaching to a chair, crutches or walker. The clamp has a rubber grommet to prevent scratching, along with an adjustable Velcro tightening strap. The holder can be carried in the user's wheelchair bag until it is needed. An insulated beverage jacket is included. It can al

Drive Tennis Ball Walker Glides (Model 10121)

The Drive Tennis Ball Walker Glides, model 10121, are rear walker glide tips designed for use by individuals with balance, lower extremity, or walking disabilities or arthritis. These tennis ball-like glides slip over the back legs to aid in moving the walker. The set includes two glides and two replacement pads that fit on the bottom of the glides. WARRANTY: Limited one-year warranty.

Dual Purpose Oxygen Cylinder Holder (Model Cs1200)

The Dual Purpose Oxygen Cylinder Holder, model CS1200, is an oxygen cylinder carrying case designed for use by individuals with respiratory disabilities who use either a wheelchair or a walker. This dual purpose unit allows the user or a caregiver to move oxygen cylinders from a wheelchair to a two-wheeled walker and back. The unit attaches to most two-wheeled walkers and most wheelchairs, including bariatric wheelchairs. The unit is made of polyester with Velcro straps for attaching to the whee

E-Z Ski Universal Walker Skis (Model W604)

The E-Z Ski Universal Walker Skis, model W604, are walker glide tips designed for use on walkers with front wheel attachments. These ski-shaped glides install on the rear legs using the attached adjusting cylinder to improve walker mobility. DIMENSIONS: The adjusting cylinder accommodates 7/8- and one-inch leg shafts. COLOR: White.

Easy Basket (Model W1616)

Easy Basket, model W1616, is a wire basket for walkers designed to provide carrying capacity for individuals with mobility disabilities. Made of vinyl-coated metal wire, this baskets hang on the front cross brace of most walkers. DIMENSIONS (LxDxW): 14.5 x 9 x 8 inches. COLOR: White.

Easy Caddy (Model 14A108A)

The Easy Caddy, model 14A108A, is a carrying tray and cup holder designed for use by individuals who use walkers. This tray clips in place on most folding wheeled walkers. It features a large compartment and a smaller shallower section. The top tray is recessed to hold items such as a dinner plate in place. The contoured sides have no dirt traps. A cup holder helps prevent spillage. The tray is made from durable plastic, supports up to 4.4 pounds, and can be cleaned by hand or in a domestic dish

Easy-Up Handle For Walker

Easy-Up is a handgrip attachment and walker handgrip extension bracket standing aid designed to alleviate discomfort and build greater self-reliance for persons with mobility disabilities. Composed of high impact molded polycarbonate, these standing aids are attached along the sides of a walker and are intended to help users rise from a sitting position without assistance in a variety of places: Chairs, couches, beds, and automobiles. WARRANTY: Three year limited warranty on material and defects

Easyglide Walker Tips

The Easyglide Walker Tips are walker and commode tips designedd to facilitate moving a walker by individuals with mobility disabilities. These glide tips fit over the existing rubber tips on the rear walker legs. DIMENSIONS: Attach without tools to standard 1 1/8 inch walker leg tips. COLOR: Bright yellow.

Easyglider Walker Tips

The EasyGlider Walker Tips are walker glide tips designed for use by individuals who use walkers. These dish-shaped tips fit over the rubber tips on the back legs of a two-wheeled walker for increased maneuverability on any surface. The tips attach without tools. DIMENSIONS: 3 inches in diameters; fits standard 1.125-inch tips. COLOR: Bright yellow.

Economy Walker Basket (Model F70319-2000)

The Economy Walker Basket, model F70319-2000, is a wire basket for walker designed to provide carring capability for people with walking or balance disabilities. This plastic-coated wire basket attaches to the cross bar and upright bars of most walkers with Velcro strips. The basket includes a heavy-duty plastic tray with one large compartment, a coin or medication holder, an a round compartment for a glass, can, or cup. DIMENSIONS: 5.5 x 16 x 7 inches.

Essential Deluxe 3 Pocket Walker Pouch (Model 1216)

The Essential Deluxe 3 Pocket Walker Pouch, model W1216, is a carryin bag for walkers. This bag attatches to a walker cross bar using the Velcro straps and features one large pocket and two smaller pockets with Velcro closures. COLOR: Royal blue.

Executive Walker Organizer

The Executive Walker Organizer is a carrying bag for walker designed for use by individuals with balance or walking disabilities. This bag fits most walkers and is installed on the walker with advanced hook and loop closures. This bag is made of easy-clean fabric and features a window pocket for an ID card and multiple pockets for organization. DIMENSIONS: 7.75 x 10.75 x 0.75 inches. COLOR: Black.

Fixed Wheels

Fixed Wheels are wheeled leg attachments for walkers designed for use on the front of a walker. The wheeled attachments increase the maneuverability of the walker. The wheels roll freely, helping the individual to walk naturally and take fewer steps and allow the walker to glide easily over irregular surfaces. DIMENSIONS: Available in 3- or 5- inch lengths. Both sizes fit 1-inch diameter walker tubing. CAPACITY: 300 pounds.

Flashlight And Attachment (Model Fl-1000)

The Flashlight and Attachment, model FL-1000, is a cane, walker and wheelchair light designed for use by individuals who use walkers, canes, and wheelchairs. The light attaches to any tube product with a diameter of .875 to 1 inch. It comes with a wrist strap and a clip that pivots 360 degrees to change the direction of the light. The light can also be detached from the clip for use as a flashlight. This light can also be used with bicycles and baby strollers. No tools are required for attachmen

Fleece Arm Rest Pads Or Fleece Wheelchair Arm Rest Pads

The Fleece Arm Rest Pads or Fleece Wheelchair Arm Rest Pads are designed for use on wheelchairs, office chairs, or walkers. These pads can be taken on and off with the sewn in Velcro brand closure strips. DIMENSIONS: 12 x 11 inches. COLOR: Dark green, brown, gray, black, red, blue, fuchsia, white, or purple.

Fleece Walker Hand Rest Pads

The Fleece Walker Hand Rest Pads are walker handgrip pads designed for use by individuals who use walkers. These soft fleece pads wrap all the way around the walker handles and are held in place by Velcro closures. COLOR: Dark green, brown gray, black, red, blue, fuchsia, white, or purple.

Folding Walker Basket

The Folding Walker Basket is a wire basket for walkers designed to provide carrying capability for people with mobility disabilities. The vinyl-coated steel basket fits any walker with a crossbar and attaches with clips and adjustable Velcro straps. It folds flat when not in use. DIMENSIONS (HxDxW):7 x 6 x 16.5 inches.

Forearm Rest Attachment (Model 6035)

Neolite covered trough and vertical handgrips that adjust fore, aft, and rotate. For attachment to Invacare wheeled walkers.

Front Mount Walker Carryon (Model Ez0040)

The Front Mount Walker Carryon, model EZ0040, is a carrying bag for a walker designed for use by individuals with mobility or walking disabilities. Made of weather-resistant nylon, this pack attaches to the front of a walker using dual-strap attachment anchors that fasten to the front of the walker’s frame. Features include a detachable beverage holder, a large storage compartment and three deep pockets designed to provide access to personal items such as cell phones or remote controls. DIMENSIO

Gel Walker Handle Cover

Gel Walker handle covers are designed for individuals who use walkers. The covers can protect users skin and aid in healing existing sores and/or abrasions. Made to fit over the side tubes of all brands of traditional walkers. The pads are OPEN at both ends and are applied over the existing hand grips. These are for walkers that have a mostly straight circular grip like found on bicycles and U shaped walkers. Regardless of the covering on the hand grip - they Velcro over the existing grip. Will

Glide Caps (Model W602)

The Glide Tips, model W602, are walker glide tips designed for use on walkers with front wheel attatchments. These tips replace the existing rear walker tips to improve walker mobility. DIMENSIONS: These tips fit one-inch leg shafts. COLOR: Black.

Glides

Glides are walker glide tips designed for use on the back of a walker when using wheels on the front leg. The nylon tips help glide the walker along a surface until weight is applied to handgrips, activating brakes.

Granny Jo Deluxe Walker Bag

The Granny Jo Deluxe Walker Bag is a carrying bag for a walker designed for use by individuals with mobility and walking disabilities. This lightweight cotton bag features two straps with leather trimmed buckles and Velcro closures that secure the bag to the walker. There are two external pockets for convenient access to small items such as cell phones or glasses, and the main compartment is fully lined and has interior slots for identification and credit cards, a key holder and an interior Velc

Granny Jo Designer Walker Bag

The Granny Jo Designer Walker Bag is a carrying bags for a walker designed for use by individuals with mobility and walking disabilities. This line of lightweight bags features two straps with brass buckles, clip closures, or metal clips that secure the bag to the walker. The bags are fully lined and have interior pockets. COLORS: Various colors and patterns.

Granny Jo Walker Bag

The Granny Jo Walker Bag is a carrying bag for a walker designed for use by individuals with mobility and walking disabilities. This lightweight cotton bag features two straps with large buttons and Velcro closures that secure the bag to the walker. There are two external pockets for convenient access to small items such as cell phones or glasses, and the main compartment is secured inside with Velcro closure. The bag is machine washable. DIMENSIONS(LxW): 17.5 x 10 inches. COLORS: Charcoal gray

Gray Tips

The Gray Tips are walker and commode tips designed for replacement of the worn tips on commodes, canes, or walkers. These tips are made of one hundred percent natural rubber and are metal reinforced for skid-resistant traction. SIZES: Aluminum and quad cane tips fit tips 5/8 inch in diameter. The cane tips fit tips 0.75 inch in diameter. The walker and commode tips fit tips 1 1/8 inch in diameter.

Hangin Out Bag (Model 160)

The Hangin Out Bag, model 160, is a wheelchair backpack or carrying bag for walker designed for use by individuals with walking or mobility disabilities. Available in cordura nylon or heavy denim, this bag is equipped with wide patterned or solid polyester webbing with black plastic side release buckle belt for hanging from U-shaped handles, wide armrests, walkers, or chairs that have no push handles. A top bag flap is also featured for monogramming. Other features include a single inner compart

Hanging Basket / Tote Bag / Tray

DO IT YOURSELF ENTRY --- PURPOSE: To provide a means for individuals who use walkers to carry items. . Included in a chapter entitled "Housekeeping & Getting Around," this illustrated article describes how to fashion and attach a container to a walker for use as a tote or tray. The selected basket or other container is fastened to the top bar of the walker with plastic ties. Attaching a dowel to the bottom of the container with plastic ties stabilizes the container and prevents swinging. MA

Have-A-Tray Carrier (Models 70612-3200/3400/6100)

The Have-A-Tray Carriers are caddys for wheelchairs, walkers, and crutches. The two-compartment carriers allow ready access to personal itms. The caddies are made of molded polypropylene copolymer with a drain hole in each compartment. Hardware is supplied with each model for proper attachment. DIMENSIONS: Inside dimensions are 11.25 x 2 7/8 x 7.75 inches. WEIGHT: Wheelchair carrier (70612-6100) is 2 pounds, walker caddy (70612-3200) is 1.3 pounds, and the crutch caddy (70612-3400) is 1.3 pounds

Helping Hand Tray

The Helping Hand Tray is a carrying accessory that can be used with a walker, wheelchair, or armchair. Hot or cold foods can be transported on the tray, which is dishwasher safe and can be sanitized. The tray will attach to walkers with 18-inch crossbars by means of clips, so persons with limited hand dexterity are able to attach or detach the unit. The tray slides forward on the walker to permit walking in a correct and safe position, then can be pulled back for use in a sitting position. The t

Kangapouch (Model 977)

The Kangapouch, model 977, is a wheelchair and walker caddy designed to afford people with mobility disabilities the ability to carry items with them. Made of corduroy, the Kangapouch features oversized, deep pockets and attaches to the front of a walker or the back of a wheelchair using Velcro straps. DIMENSIONS (LxW): 19 x 16.5 inches. COLOR: Assorted. WARRANTY: The manufacturer guarantees satisfaction with this product or it may be exchanged or returned for a full refund.

Keepabouts Carrybag

The Keepabouts Carrybag is a carrying bag for walker designed for individuals with walking disabilities. The bag is intended for use as a bag that attaches to a walker and as a tote bag that can be carried by hand or over the shoulder. It attaches to a walker using a rectangular piece of fabric with Velcro on each end that is attached at the center to the top of one of the handles of the bag; the closure can be wrapped around a section of the walker frame and closed using Velcro to attach one or

Maddacomfort Walker And Crutch Hand Pads

The Maddacomfort Walker and Crutch Hand Pads are designed to provide cushioning for the hands of walker and crutch users. These washable terry cloth and foam pads wrap around standard walker handles or crutch hand grips and are secured by Velcro fasteners. DIMENSIONS: 6.5 x 6.75 inches.

Merry Walker Serenity Trays

The Merry Walker Serenity Trays are wooden trays for walkers designed to provide activity for individuals with dementia and other cognitive or neurological disabilities. All models feature implements or devices securely fastened to the tray. Five models are available. The Chef includes a small aluminum bread pan, a plastic bowl, and a wooden spoon. The Homemaker is equipped with a rolling pin, a small bread pan, and a wooden spoon. The Carpenter has a block of wood and a sponge sanding block. Th

Metro Walker Ski Glides

The Metro Walker Ski Glides are walker glide tips designed for use on back of a wheeled walker. These replacement ski glides are designed for use with the Metro Walker (see separate entry) or other walkers. These glides are designed to mover easily over most surfaces and are used to stabilize the walker and control the user's pace. DIMENSIONS: 2 x 1 x 2 inches. COLOR: Black.

Mobility Clutch And Pouch

The Mobility Clutch and Pouch is a carrying bag that can be attached to canes, crutches or walkers, a wheelchair side pouch, or a bed pouch. This pouch carries items such as keys, money, and medications and attaches with Velcro to mobility aids and bed rails. This clutch has a removable carrying strap and an outside pocket for glasses or a cell phone. COLOR: Black, red, or pink.

Mounting System For Walking Stick

CUSTOM ADAPTATION PURPOSE: To enable an individual who uses both a cane and a walker to transport the cane on the walker. A plastic cup was fastened to the lower part of the frame with a screw-tightened hose clamp to hold the tip of the cane. The top of the cane rests in a hook attached to the upper frame with another screw-tightened hose clamp. A hole in the bottom of the plastic cup enables dirt or debris picked up by the cane tip to be cleaned out. TITLE: Walking Stick Carrier. JOURNAL: TAD

Multi Purpose 5 Pocket Pouch (Model 156)

The Multi Purpose 5-Pocket Pouch, model 156, is a wheelchair side pouch which may also be used on walkers. This transparent plastic carrying caddy features two adjustable hooks for fastening.

Mushroomglide Tips

The MushroomGlide Tips are walker and commode tips designed to improve the maneuverability of walkers. These solid plastic tips fit most standard walkers and allow maneuverability of the walker on such surfaces as uneven concrete, tiles, and carpeting. INSTALLATION: Instructions ans mounting screws are included. DIMENSIONS: Models are available to fit walkers with 5/8-inch, 7/8-inch, or 1-inch inner diameter tubing.

No-Wire Walker Basket

The No-Wire Walker Basket is a caddy for a walker designed for use by children or adults with mobility disabilities. Made of polypropylene, this basket attaches to the horizontal and vertical bars of the walker on the inside or the outside. Retracting stabilizing arms lock onto the legs of the walker to eliminate swinging. A slot on the front of the basket holds an identification tag. The bottom of the basket features a built-in glass, can, or cup holder; a smaller compartment for coins or medic

Norco Adaptable Wire Basket (Model Nc94326-1)

The Adaptable Wire Basket, model NC94326-1, is a plastic-coated steel wire basket designed to carry small, lightweigtht items for people who use folding or standard walkers. The basket attaches to the walker's side frame and front cross bar and can be bent to ensure a perfect fit. DIMENSIONS (HxLxW):7 x 18 x 7 inches. WEIGHT: 26 ounces.

One Handed Brake For Walking Frames

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted walker brake system for individuals who are unable to use both hands to brake a walker. An individual with multiple sclerosis utilizes a walker but he was increasingly unable to have the strength to use both hand brakes to stop/slow his walker down. The result was the walker would pull to one side and leave the individual prone to falling. A therapist at the MS Society referred this individual to TAD where a brake-splitter

One-Handed Walker

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted one-handed walker for an individual having use of only one hand following a stroke. This simple but effective adaptation was created by cutting off the existing handles of the walker while managing to remove one of the handgrips intact. The handgrip was placed in the center of a new bar which spans the space between the two original handlebars. Underneath the handgrip, a single brake lever was mounted which was then connect

Parsons Netted Walker Pouch (Model 16C191A)

The Parsons Netted Walker Pouch, model 16C191A, is a carrying bag for walkers designed for use by individuals with walking or balance disabilities. This pouch has many pockets, including private pockets and pockets that are visible because of the netting. The front features one zippered private pocket, one open private pocket, and one mesh pocket. The back features a large see-through mesh pocket so the user can see what he or she is carrying. A hook- and-loop strap attaches the pouch to the cro

Pediatric Walker Bag

The Pediatric Walker Bag is carrying bag for walker designed for use by children with balance, walking, or mobility disabilities. This small denim walker bag is designed to be attached to the front of a child's walker. It also can be used with an adult walker hanging from the the side arm support. The Pediatric Walker Bag attaches to the walker with two straps that are secured with plastic clips, and it features to outside pockets that do not close. DIMENSIONS (LxW): 8.5 x 7 inches. COLOR: Blue

Penco Walker Glides

The Penco Walker Glides are walker glide tips designed for use by individuals who use walkers. Designed to insert easily into walker tubing, these glides are constructed with a curved front to enable wheeled walkers to move smoothly over a variety of surfaces, thresholds and elevations without snagging or lifting. They are made of a durable polymer resin suitable for both indoor and outdoor usage and can also navigate bumps and ridges without getting entangled, such as crossing cracks in sidewal

Platform Attachment (Model 6027)

The Platform Attachment, model 6027, is a platform forearm attachment for a walker designed to enable individuals with upper extremity and mobility disabilities to use walkers. These height-adjustable platforms install without tools and feature a thick, vinyl-covered arm pad with a heavy-duty Velcro strap and a padded hand grip. WARRANTY: Limited lifetime warranty.

Platform Crutch Attachment For Walkers (Model 7702)

Padded forearm trough mounted on aluminum upright. Vertical vinyl handgrip can be positioned fore and aft to accommodate forearm length. Aluminum upright clamps on to upper and lower horizontal side bars of walker. Height adjustable. Velcro closure restraining strap for forearm.

Platform Walker Attachment

The Platform Walker Attachment is a platform forearm attachment for a walker. This attachment fits most walkers and is intended for use by a person who cannot bear weight on his or her hand.

Platform Walker Attachment (Model W1219)

The Platform Walker Attachment, model W1219, is a platform forearm attachment for walker designed to enable individuals with use of only one arm to use a walker. The unit clamps to the side bars of most walkers and extends above the walker arm. A contoured platform supports the affected arm and a hook-and-loop closure strap secures the arm. The unit is equipped with an upright padded handgrip.

Quilted Walker Bag

The Quilted Walker Bag is a carrying bag for a walker designed to provide carrying capability for people who use walkers. Made of quilted fabric, this bag hangs over the front crossbar of a walker, placing one large flapped pocket inside the walker and a second large flapped pocket on the front of the walker. Strips of hook-and-loop material on the back of each pocket secure the pockets to each other and keep th bag in place. This bag may be machine washed and air dried. DIMENSIONS:13.25 x 15.25

Rear Wheel Brakes (Models 6264 & 6265)

The Rear Wheel Brakes are rear brake attachments for walkers designed for use with 3- or 5-inch wheel attachments (sold separately). Model 6264 is intended for use with single fixed wheel attachments and model 6265 is intended for use with swivel wheel or Tall Fixed Wheel attachments (not included). Both models are combination brakes and small wheels. These brakes operate without interfering with the normal use of the walker. DIMENSIONS: Model 6264 are 10-inch extensions and model 6265 are 13-i

Robocup

The RoboCup is a cup, can or drink holder designed for use by people who use a walker, wheelchair or mobility scooter and other individuals with a disability that affects their ability to hold or grasp objects. This portable dual caddy can securely hold two drinks, two fishing poles, tools, gear and personal belongings such as a telephone, keys, glasses and flashlight. The unit attaches to wheelchairs, walkers, scooters, grab bars, hospital beds or golf carts using the integrated clamp. The Robo

Rollator Seat Cushion (Model 2341)

The Rollator Seat Cushion, model 2341, is a seat cushion for rollators designed for use by individuals with walking or balance disabilities. This dense foam cushion attaches to the walker with Velcro straps for a secure hold. The cushion includes a removable, washable cover. DIMENSIONS (HxLxW): 3 x 12 x 13 inches. The cushion is 3 inches thick. COLOR: Light blue.

Rollator Seat Cushion (Model P-11044)

The Rollator Seat Cushion, model P-11044, is a seat cushion for rollators designed for use by individuals with walking disabilities. This padded cushion has a removable, washable cover and fits most rollator seats. DIMENSIONS(HxLxW): 2 x 15 x 5 inches. COLOR: Blue.

Rolyan Walker Splint (Models A7671 To A7674)

The Rolyan Walker Splint, models A7671 to A7674, are splints designed to help individuals with arthritis and neurological disabilities to securely grasp a walker handle. It features wrist straps for stability and is made from Polyform splinting material with a Kushionflex pad. The splints can be specifically adapted to each user by using a heat gun or hot water. Available for right- or left-handed use. DIMENSIONS: Determined by width of 2nd to 5th metacarpal phalangeals (MCPs). Small/Medium is 3

Round Mobility Clutch

The Round Mobility Clutch is a carrying bag designed for use by individuals with lower extremity, mobility, balance and walking disabilities. This oval carrying bag attaches to most canes, walkers, crutches, and wheelchairs or transport chairs with two hook-and-loop straps. The bag has an outside easy-access pocket that features an elasticized top and an interior zippered pocket for storing items such as keys, cell phones or other small items. The bag easily detaches and can be worn on the wrist

Rubber Mag Wheels

The Rubber Mag Wheels are wheeled leg attachments for walkers. Designed to enable users to move the walker without lifting the walker, these wheels fit walkers with one-inch tubing and eight adjustment holes. DIMENSIONS: 5 inches in diameter for outdoor ($29.99) use or 3 inches in diameter for indoor use ($24.99). WARRANTY: Included.

Sammons Preston Comfort Walker / Crutch Pads

The Comfort Walker/Crutch Pads are handgrip pads designed to be fastened over the standard hard rubber handgrips of most walkers and crutches. These pads are of a synthetic sheepskin material. The pads can be machine washed and dried. DIMENSIONS: The pads are 6 inches long.

Sammons Preston Mini Wheelchair/walker Pouch

The Sammons Preston Mini Wheelchair/Walker Pouch doubles as a carrying bag for a walker and a wheelchair side pouch for use by people with mobility disabilities. The machine-washable nylon pouch snaps over the front walker bar or hangs from the wheelchair armrest. DIMENSIONS (WxH): 10 x 8 inches. COLOR: Gray.

Sammons Preston Walker/crutch Pads

The Sammons Preston Walker/Crutch Pads are walker handgrip pads designed to provide a cushioned grip and prevent the hands from slipping. The washable, terrycloth-covered foam pads fasten to most walker handgrips using the attached Velcro. DIMENSIONS: 6.5 x 6.75 inches. COLOR: Black.

Seat For U-Step Walker

The Seat for U-Step Walker is a walker accessory designed for individuals with mobility difficulty. It allows the user to take breaks while walking and aims to make users feel more independent and able to walk longer distances, while taking breaks. It can stay on the seat while folding up the walker.

See 4 Safety Mobility Light

The See 4 Safety Mobility Light is a small light designed for people with low vision and others that may need assistance navigating in low light conditions. Attaches to any size walker, rollator, or cane tubing. Senses both low light level and motion and automatically turns on and off.

Sheepette Walker Grip Covers (Model D5008)

Sheepette Walker Grip Covers, model W5008, are walker handgrip pads designed to cushion walker handgrips of most standard walkers. Made of thick, plush Sheepette (synthetic sheepskin), these grips wrap around the existing handgrips and secure with Velcro-style closure. COLOR: Natural.

Sheepskin Handgrips

The Sheepskin Handgrips are walker handgrip pads designed to cushion the hand. The pads are made of two layers of soft, washable, synthetic sheepskin and attach to most walkers with hook-and-loop closures. DIMENSIONS: 6 inches long.

Sheepskin Walker Handle Cover

The Sheepskin Walker Handle Cover is a walker handgrip pad designed to cushion the hands of individuals who use walkers. This sheepskin cover wraps around the walker handle and is held in place by a Velcro strip. Velcro tightens the cover so that it will not slip.

Side Mount Walker Carryon (Model Ez0030)

The Side Mount Walker Carryon, model EZ0030, is a carrying bag for a walker designed for use by individuals with mobility or walking disabilities. Made of weatherproof nylon, this pack attaches to the side of a walker using dual-strap attachment anchors that fasten to the front of the walker's frame. Features include a detachable beverage holder and several pockets designed to provide access to personal items such as cell phones or remote controls. DIMENSIONS (DxLxW): 2.5 x 15 x 14.5 inches. COL

Simple Walker Bag

DO IT YOURSELF ENTRY --- PURPOSE: To provide a means for individuals who use walkers to carry items. . Included in a chapter entitled "Housekeeping & Getting Around," this article provides detailed instructions with illustrations for making a simple three-pocket caddy from a decorative dishtowel or hand towel. The towel is folded in half with the decorated sides together, and then one side is folded back so the hemmed edges line up with the half fold, creating the pockets. After pinning the

Smart Walker

---- PROTOTYPE --------- PURPOSE: To create a prototype of a walker braking system that can prevent slips, slides, and falls for the elderly, individuals with mobility, balance disabilities, and/or grasping disabilities. A team of graduate students from the Department of Biomedical Engineering and undergraduate seniors from several departments in the College of Engineering have worked with David Lipson, Cornell professor of engineering, as well as with Dr. Eli Einbinder to design an electronic b

Snap-On Walker Basket

The Snap-On Walker Basket with Tray is a wire basket for a walker designed for use by individuals who carry items when using a walker. The Basket attaches to a walker without tools includes a tray and cup insert.

Star Glide Walker Slides (H70323 Series)

Star Glide Walker Slides, model H70323, are walker glide tips designed for use by individuals with walking and balance disabilities. These nylon glides replace the rubber tips on the rear legs of wheeled walkers and self-align with the floor to reduce friction and allow easier movement. DIMENSIONS: For walkers with one-inch and 1 1/8-inch diameter legs.

Supertote Carryall

The SuperTote Carryall is a wheelchair side pouch or a carrying bag for a walker or crutch designed to provide carrying capability for people with mobility disabilities. Made of durable machine-washable nylon, this tote features pockets with zipper closure. DIMENSIONS: 9.5 x 7 x 4.5 inches. COLOR: Blue or black.

Swivel Wheels

Swivel Wheels are wheeled leg attachments for walkers designed for use on the front of a walker. These wheeled attachments increase the maneuverability of the walker and swivel to turn in any direction, allowing the walker to be maneuvered without being lifted. DIMENSIONS: Available in 3- or 5-inch lengths. Both sizes fit 1-inch diameter walker tubing. CAPACITY: 300 pounds.

Tall 3-Inch Single Fixed Wheel Attachments With Tall Rear Legs And Glide Tips (Models 6277 & 6278)

The Tall 3-inch Single Fixed Wheel Attachments with Tall Rear Legs and Glide Tips are wheeled leg attachments for walkers designed to convert standard Invacare walkers to wheeled walkers for use by individuals up to 6 feet, 6 inches tall. Both models have easy-to-clean polypropylene wheel rims and non-marring thermoplastic rubber tires. The wheels and bearings are corrosion protected. DIMENSIONS: Model 6277 includes 10-inch rear leg extensions and model 6278 includes 13-inch rear leg extensions.

Tall Leg Extensions (Model 6275) & 13-Inch Rear Leg Extensions With Glide Tips (Model 6266)

The Tall Leg Extensions, model 6275, and the 13-inch Rear Leg Extensions, model 6266, are leg extensions for walkers designed to convert standard-height walkers to walkers designed for use by individuals up to 6 feet, 6 inches tall. Model 6275 is intended for use with standard walkers without wheels and model 6266 is designed for use on walkers with fixed or swivel front wheels and includes glide tips.

Ten-Inch Rear Glide Brakes

The Ten-inch Rear Glide Brakes are wheeled leg attachments with brakes for walkers. Designed for use on walkers with front wheels, these brakes fit walkers with one-inch tubing and eight adjustment holes. WARRANTY: Included.

Tennis Ball Walker Glides

The Tennis Ball Walker Glides are walker glide tips designed for use by individuals with walking or balance disabilities. Made from real tennis balls, these glides slip over the bottom of the rear legs. To replace them, the user simply pops in the replacement caps. The set includes two tennis ball glides and two replacement caps. OPTIONS: Additional replacement caps are available.

To2Te Oxygen Cylinder Holder (Model Cs 1100)

The TO2TE Oxygen Cylinder Holder, model CS 1100, is an oxygen cylinder carrying case for walker designed for use by individuals with respiratory disabilities who use walkers. This nylon holder attaches to most 2-wheeled walkers. It holds one cylinder and attaches to the walker with Velcro straps. It has a valve wrench pocket located on back. SIZES: D for "D" cylinder, E for "E" cylinder, M9[C]/M7 for "C" cylinder, M6[B] for "B" cylinder.

Travel Cushion

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted seat cushion for a senior with advanced osteoporosis. Using previous cushions as a model, a new set of cushions that are 420 by 475 millimeters and joined by a 75 millimeter spine, with a 50 millimeter-thick Dunlop Enduro foam filling were created. The long-wearing fabric covers are zippered so they can be taken off for washing. Two pieces of 39 millimeter wide webbing form the handles. The travel cushions have made it poss

Ultratip

The UltraTip is a cane, crutch, or walker tip designed for use by individuals with walking, lower extremity, or balance disabilities. Made of a special soft material, these tips are designed to last four to ten times as long as traditional tips. The design provides 100 percent touchdown elasticity and a firm grip and enables the tip to flex to maintain ground contact. DIMENSIONS: Available in .75-inch or 5/8-inch. COLOR: Blue, white, red, black, violet, yellow, or silver.

Universal Carry All

The Universal Carry All is a carrying bag for walkers designed to provide carrying capability for people with mobility disabilities. This heavy-duty nylon pouch secures to walker crossbars, wheelchairs, and bed rails and features one large compartment, a security pocket and eyeglass pouch, and a keypouch with cord. DIMENSIONS (WxL): 18.75 x 11 inches.

Universal Tote (Models Ez0101 & Ez0102)

The Universal Tote is a carrying bag for a walker or a wheelchair side pouch designed for use by individuals with mobility or walking disabilities or spinal cord injury. Made of nylon, this pack attaches with two adjustable straps to the front of a walker, and the smaller size (model EZ0102) attaches to the armrest of a wheelchair. An inner pocket can be accessed by opening a full-length zipper. There are two (model EZ0101) or three (model EZ0102) pockets on the outside. SIZES: Large (model EZ01

Walk-A-Tray (Model 101)

The Walk-A-Tray, model 101, is a tray for a walker designed to allow people who use walkers to carry food and other items. The tray snaps on and off most walkers up to 18.5 inches wide and features a special slot to hold cups steady. WARRANTY: The manufacturer guarantees satisfaction with this product or it may be exchanged or returned for a full refund.

Walker / Wheelchair Bag

The Walker/Wheelchair Bag is a carrying bag for a walker or a wheelchair back pouch designed to enable persons with mobility disabilities to transport personal items. Made of plastic-coated nylon with cotton binding, the bag features two reinforced pockets and attaches to the walker or wheelchair using hook-and-loop fasteners. The bag is mildew and fungus resistant and can be machine washed and dried. DIMENSIONS (LxH): 22 x 10 inches. COLOR: White.

Walker / Wheelchair Bag (Model M2930)

The Walker / Wheelchair Bag, model M2930, is a lightweight canvas bag that attaches to a walker or wheelchair and features outside compartments with a fold-over flap. COLORS: Asssorted.

Walker And Wheelchair Bags

The Walker and Wheelchair Bags are designed to provide carrying assistance for people who use whelchairs or walkers. All styles are made of washable packcloth (400 denier nylon with a waterproof coating) and feature Velcro straps to hold them in place. The Style A Walker Bag ($25) secures to the front bar and and legs of the walker with five Velcro straps and features flap closure and inside compartments. Style B ($15) is a saddle-bag style pouch and secures to the side of a walker or over a wh

Walker Armrests

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted armrests for a walker to be used by an individual with cerebral palsy and limited mobility. A previous modification to the walker added a padded, curved bar for the individual’s safety, but the existing gutter split armrests were at the wrong angle for his posture and were not comfortably padded. The existing armrests were removed, and two new rests created from a 12 millimeter ply base and 25 millimeter foam pads covered i

Walker Bag (Models Wb-S, Wb-M, Wb-L)

The Walker Bag is a carrying bag for Kaye Posture Walkers (see separate entry). These nylon bags offer pockets for carrying capacity for school or personal items and attach to the walker with straps. Models WB-S and WB-M can be side or rear mounted and model WB-L is designed for rear mounting only. SIZES: Model WB-S is small, model WB-M is medium, and model WB-L is large. DIMENSIONS (WxH): model WB-S is 13.5 x 9.5 inches, model WB-M is 14 x 16 inches, and model WB-L is 18.5 x 17 inches. COLOR: M

Walker Bag Hook

The Walker Bag Hook is a carrying hook for a walker designed for use by individuals with mobility disabilities. This large plastic hook attaches to the walker with an adjustable clamp and carries a pocketbook or similar item, leaving the individual's hands free to use the walker. DIMENSIONS: The clamp adjusts to fit tubing from 0.5 to 1.125 inches in diameter.

Walker Bag.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Carrying aid to attach to the front of a standard walker. Instructions are provided to make a fabric bag to attach to the front of a walker. Includes drawings. SKILLS REQUIRED: sewing. AUTHOR: Occupational Therapy Service. TITLE: REF: Resource Sheet: Institute of Physical Medicine and Rehabilitation, New York. NARIC CALL NUMBER: PAGES (including cover): (year-replace this).

Walker Basket (Model 6098)

The Walker Basket, model 6098, is a wire basket for a walker designed to provide carrying capability for individuals with mobility disabilities. This vinyl-coated wire basket mounts to the front crossbar of the walker with snap hooks and can be installed on the inside or the outside of the walker. COLOR: Grey. WARRANTY: Limited lifetime warranty.

Walker Basket (Model A772-1)

The Walker Basket, model A772-1, is a wire basket for walkers designed to increase the functionality of walkers and the independence of individuals by providing users a means to transport light objects. The vinyl-covered basket slips over many types of traditional or folding style walkers. The included plastic liner enables individuals to carry small items such as keys and pens. OPTIONS: Replacement liners are available. DIMENSIONS (LxHxW): The basket measures 18 x 7 x 4.75 inches (46 x 18 x

Walker Basket Liner (Model Ez0127)

The Walker Basket Liner Organizer, model EZ0127, is a liner for a walker basket designed for use by individuals with mobility or walking disabilities. Made of nylon, the liner includes an adjustable drawstring to fit most baskets. There is a zippered pocket for personal items (e.g. wallet, keys) and two expandable pouches to hold such items as cell phones, remote controls, or beverages. DIMENSIONS (HxLxW): 7 x 16 x 6 inches. COLOR: Black. WARRANTY: One-year limited warranty.

Walker Basket With Tray

The Walker Basket with Tray is a tray and wire basket for a walker designed for individuals who carry items when using a walker. The basket attaches to a walker with Velcro and includes a tray and cup insert to prevent items from slipping through the basket. DIMENSIONS (HxDxW): 7 x 6 x 16 inches.

Walker Basket.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Carrying basket can be attached to the front of a walker with a tubular frame. A child's bicycle basket can be attached to the frame of the front of a walker. The bicycle basket are available at most stores selling bicycles. SKILLS REQUIRED: Assembly. AUTHOR: Idea in Better Homes and Garden magazine. REF:Article. 1990.

Walker Brake System

CUSTOM ADAPTATION PURPOSE: To provide a customized braking system to a walking frame for use by a person with spina bifida, necrosis, and thrombosis. The walker was adapted by attaching a pair of locking bicycle hand-brake levers to the handlebars of the walking frame. The hand-brake cables are connected to the L-shaped brake friction bars to engage for both sets of rear wheels. The bars have a spring return so that the brakes can be easily applied and released when used on a steep slope such a

Walker Buddy

The Walker Buddy is a limb support sling for walkers designed for use by individuals with lower extremity disabilities or amputation. Designed to support a leg or stump that is not weight bearing while the user is walking with a walker. Available in standard and heavy-duty (for use with a heavy-duty walker) models, this device is a reinforced sling attached to steel brackets which hang over the top rails of a walker. OPTIONS: Fleece cover. CAPACITY: 250 pounds. COLOR: Available in assorted color

Walker Carrier

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted walker carrier frame for an individual with mobility disabilities due to lymphoedema. The individual could not transport her walker in the trunk or back seat of the family car, even when folded. While there were some commercially available carrier frames none fit the walker frame or could be used independently by the individual. A custom adapted carrier, which would fit into the car’s existing towbar socket, and meet the NS

Walker Carry-All.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Carrier bag that attaches to a walker to facilitate transporting small articles. Pattern and instructions for a seven-pocket fabric carry-all that folds over the top front bar of a walker and fastens with a velcro strip. Includes photograph. SKILLS REQUIRED: Sewing. AUTHOR: Kernaleguen, A TITLE: Clothing Designs for the Handicapped REF: Edmonton, Alberta, Canada: University of Alberta Press: p 216-217 NARIC CALL NUMBER: R0866 PAGES ( including cover):

Walker Extension Legs

The Walker Extension Legs are leg extensions for walkers designed to increase the height of a walker. They can be installed without tools. DIMENSIONS: Walker Extension Legs adjust the walker height up to 6.25 inches.

Walker Front Pac (Model W18) & Walker Side Pac (Model W12)

The Walker Front Pac W18 and Walker Side Pac W12 are carrying bags for walkers made of heavy packcloth. The pacs have polpropylene snap straps and velcro straps for attachment to the walker and velcro closures. Model W18 attaches to the front of the walker; Model W12 attaches to the side and has a pocket facing the user for added security and quick access. DIMENSIONS: The Walker Front Pac is 18 x 12 inches, and the Walker Side Pac is 12 x 12 inches.

Walker Glides

"DO IT YOURSELF" ENTRY --- PURPOSE: To enable individuals who use standard walkers to move across carpet and other surfaces without lifting the walker. To make the glides for a walker with front wheeled legs, cut a small "X" in a tennis ball and push leg of walker down into it. Make sure the ball is snug around the leg and does not slide when the user lifts the walker leg. Repeat for the second leg. MATERIALS: Tennis balls and walker. TOOLS: Sharp knife or scissors. SKILLS REQUIRED: Cutting

Walker Hand Grip Pads

The Walker Hand Grip Pads are handgrips for walker designed for use by people with balance, walking, mobility and lower extremity disabilities that use a walker. Made of a combination of polyester and acrylic sheepskin-like fleece, this product includes two pads that wrap around the handgrip of each side of a walker. Other features include 100-percent cotton linings with Grip Dots that prevent the pad from sliding. The pads can be machine washed and dried. DIMENSIONS (LxW): 6.5 x 6.5 inches.

Walker Hand Grips (Model 120)

The Walker Hand Grips, model 120, are walker handgrip pads designed for use by people with walking, mobility and lower extremity disabilities who use a walker. The grips are sold in pairs and include two pads that wrap around the handgrip of each side of the walker. The pads are made from sheepskin and fasten with Velcro closures. The pads are machine washable and dryable. DIMENSIONS (LxW): 5 x 5 inches. COLOR: Natural.

Walker Handle Grip

The Walker Handle Grip is a walker handgrip pad designed for use by individuals who use walkers. Made of a polyester and acrylic blend sheepskin-like fleece, this cover wraps over the walker handle and is held in place by a Velcro strip. The pads fit most standard walkers.

Walker Handle Pads

The Walker Handle Pads are walker handgrip pads designed for use by youth and adults with balance or walking disabilities and others who use walkers. These hand grips are designed to fit all walkers, rollators and knee rollers with a frame made of standard tubing. Made of 100-percent cotton fabric, thread, locking tape and high density foam, these pads can be quickly detached and attached to another mobility device. The pad's protective cover guards against germs and bacteria. The pads are light

Walker Modification.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Modification to walker to control stride length when walking into walker. Two side supporting boards are attached to the bottom of both sides of the walker by cutting notches at the appropriate widths to fit onto walker by pressure. A wide board is inserted perpendicular to the narrow boards and slid to the correct place to prevent person from walking too far into the walker. Includes pictures. SKILLS REQUIRED: Woodworking. AUTHOR: Carolyn Jorgensen TI

Walker Modifications

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create walker modifications for an adult with paralysis on his right side, use of only the left arm and hand, and with balance disabilities. The user attends a local bridge club with an entrance that has a steep ramp with no handrail on the left side, and he had to rely on someone to walk next to him for stability and balance in addition to using his walker. The walker was helpful, but without the use of his right hand, when the frame brakes were

Walker Pannier (Model W130)

The Walker Pannier W130 is a carrying bag for walkers that attaches to the side of the walker with velcro closures for better stability. The bag is made of waterproof nylon with a hidden back pocket for a wallet or checkbook. DIMENSIONS: The Walker Pannier measures 12 x 12 x 2 inches.

Walker Pegs (Model Es-720)

Walker Pegs, model ES-720, are vertical handgrips suitable for adapting a child's walker to facilitate better posture and walking pattern. The plastic bicycle style handles are installed by drilling 2 holes in the walker's existing handles.

Walker Pouch (Model 6015-4)

The Walker Pouch, model 6015-4, is a carrying bag for a walker designed to provide carrying capability for individuals with mobility disabilities. Designed to fit adult walkers, this pouch is made of lightweight, water-repellent denier nylon with urethane-coated backing. This bag attaches over the front crossbar of the walker and features an inner and an outer pocket. COLOR: Forest green and deep blue sea combination. WARRANTY: One-year limited warranty.

Walker Pouch (Model 617)

Carrying bag attaches to the front cross frame of standard walker, web and slide bar attachment. Snap open frame stays open until pushed closed. Outside pocket for readily accessible items. Cordura nylon. 8 colors.

Walker Ski Glides

Walker Ski Glides are walker glide tips designed for use on the back of a wheeled walker by people with balance or walking disabilities. The Walker Ski Glides are made of durable plastic, and they fit onto the bottom of the extension legs of most walkers.

Walker Tennis Balls

Walker Tennis Balls are walker glide tips designed for use by individuals with walking, balance or mobility disabilities. These cushioning balls are made for standard walker feet and are intended to protect floors while ensuring that the walker will not slip on smooth surfaces or snag on carpeting. COLORS: Blue.

Walker Tote (Model St119)

The Walker Tote, model ST119, is a carrying bag designed for use with a walker by individuals with walking disabilities. This bag is made to provide easy on/off handling with adjustable velcro straps and a velcro closing. It is made from medium weight canvas. OPTIONS: Silk screening with a logo or message is available in a variety of colors. DIMENSIONS: 8 x 12 inches with a 3.5 inch gusseted bottom. COLORS: Body colors are natural, red, navy, royal, green and black. Assorted webbing and trim col

Walker Tote Bag

The Walker Tote Bag is a carrying bag for walker designed for use by individuals with balance or walking disabilities. Made of cotton fabric, this lightweight walker bag has hard plastic buckles and two vertical straps sewn on the back so it can be attached to a variety of walkers and rollators as well as knee walkers and wheelchairs. When properly attached and tightened, the straps prevent the bag from swinging back and forth. The Walker Tote Bag has a large interior central storage area, four

Walker Tray

The Walker Tray is a tray for a walker designed to provide carrying capability for people who use walkers. This molded plastic tray supports up to 10 pounds, clamps to the front crossbar of rigid and folding walkers, and features two recessed areas to secure cups or glasses and a large center recess for carrying food or other items; the recessed areas are lined with non-slip material. Top-rack dishwasher-safe, the tray is easily removed for cleaning, and when not in use, it can be clipped to the

Walker Tray

CUSTOM ADAPTATIONPURPOSE: To enable an individual who uses a reverse walker to transport such items as food on a plate or liquids. The individual needs to be able to keep both hands on the walker while transporting items. An 12x18 inch detachable wooden box-style tray is held horizontally by two uprights that hook over the top bar and rest on the lower bar of the walker. The tray has two divided compartments to hold juice and milk containers. The layout and size can be customized to suit indivua

Walker Tray (Model 6007)

The Walker Tray, model 6007, is a tray for a walker designed to provide carrying capability for individuals with mobility disabilities. This molded plastic tray features raised edges, cup and pen holders, and rounded corners. The tray clips to the crossbar of the walker, folds down and out of the way when not in use, and supports up to five pounds. WARRANTY: One-year limited warranty.

Walker Water Bottle

DO IT YOURSELF ENTRY --- PURPOSE: To provide a means for individuals who use walkers to keep a supply of water with them. Included in a chapter entitled "Housekeeping & Getting Around," this article explains how a bicycle water bottle can be attached to the upright tubing of the walker using the supplied bracket. If the bracket is too wide for the walker tubing, it can be padded with hot-water-pipe insulation to fit. MATERIALS: Water bottle for bicycle with bracket and hot-water-pipe insulat

Walker-Commode-Shower Bench Tips (Models T40100 & T40118)

The Walker-Commode-Shower Bench Tips are walker and commode tips designed for use with most commodes, walkers, and shower benches. Sold in sets of four, these rubber tips are lined with a metal washer for longer wear. DIMENSIONS: Model T40100 fits items with one-inch shafts and model T40118 fits items with 1 1/8-inch shafts. COLOR: All models are available in grey or black.

Walking Frame Adjustments

CUSTOM ADAPTATION PURPOSE: To enable an individual with short stature to be assisted while using a walker. The walker consists of a fixed frame with a U-shaped base. Angled vertical uprights support arm troughs and handgrips. Four small casters provide mobility. The walker enables the user to carry out daily living activities as long as a caregiver guided the walker in the right direction. However, because the user was of short stature, the caregiver was required to bend over to provide this as

Walking Frame Carrying Stick Modification

CUSTOM ADAPTATION PURPOSE: To provide a customized adaptation to a four-wheel walker enabling an individual with cerebral palsy and visual and hearing impairments to carry her walking stick and white cane while using her walker. Previous adaptations generally put the carry stick attachments on the outside of the frame; however, there was concern that this would reduce maneuverability of the walker within the individual’s small home. Attachments were added that allow the sticks to be carried wit

Walking Frame Modification

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted walking frame modification for and individual with congenital hip dislocation and has difficulty walking unaided. While this individual uses an electric scooter for going to the local shops and an electric wheelchair around her home, she requires a folding walker to take with her when going on outings in a car. The Admed seat walker with a basket and hand brakes was best suited for the individual’s needs but was too difficu

Walking Frame Modification

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted walking frame for an older individual who has had a stroke and can be safely used with only one hand. The individual was experiencing several problems with her current walking frame—the existing gutter splints were not strong enough for her and had broken in addition to being too uncomfortable to start. Additionally, this individual needed a back rest for the seat and a method for braking safely with one hand. A unique solu

Walking Frame Modifications

CUSTOM ADAPTATION PURPOSE: To provide a custom adaptation to a walking frame for an individual with spinal cord injury and mobility disability. A folding rollator frame was ideal for this individual, but it did not include features such as a basket to carry everyday things or a tray for carrying meals from the kitchen to the table. The basket and tray needed to be easily removable for occasions where the walking frame would be folded to go in the car. A basket from Howards Storage World was hoo

Walking Frame Modifications

CUSTOM ADAPTATION PURPOSE: To provide custom adaptation to a walking frame for an individual with rheumatoid arthritis. The current walking frame provided to the individual by the hospital had several issues. The individual’s arms are quite short and slender, and the armrests were set too wide for her; therefore, her arms were not at the right angle and the sides of the armrests were cutting into her. The existing vinyl cover and foam padding on the armrests was removed, the armrests were repos

Water-Repellent Walker Pouch

The Water-repellent Walker Pouch is a carrying bag for walker designed to provide carrying capacity for individuals who use walkers. This Dernier nylon bag has a urethane-coated back and attaches over a front crossbrace using hook-and-loop closure straps. Mildew- and rot-resistant, this bag has two zippered pockets and holds up to five pounds. COLOR: Forest Green. WARRANTY: Limited warranty.

Wheel Glide

Wheel Glides are walker glide tipsdesigned for use on the back of a walker when using wheels on the front legs. Wheel glides enable the walker to glide along a surface until weight is applied to handgrips, activating brakes.

Wheelchair / Walker / Scooter Bag

The Wheelchair / Walker / Scooter Bag is a caddy, or carrying bag, for wheelchairs, walkers, and scooters designed for individuals with mobility, balance, and walking disabilities or spinal cord injury. This bag attaches using adjustable straps and clip fasteners. Made of 100 percent cotton duck with Velcro closure, this bag features an outside pocket with a zippered compartment to store a cell phone and interior slots to store credit cards and identification. For wheelchair use, the bag can be

Wheelchair / Walker Pouch (Model 16C002)

The Wheelchair / Walker Pouch, model 16C002, is a wheelchair side pouch and a carrying bag for walker designed for use by people with balance, lower extremity, mobility and walking disabilities, spinal cord injury and others who use a walker or wheelchair. Made of leatherette material, this pouch features a single pocket for storage of magazines or other small items. The pouch attaches over a cross bar and is held in place with dome snaps. The pocket fastens with Velcro closure. DIMENSIONS (LxW)

Wheelchair Arm Pouch (Model 16C003)

The Wheelchair Arm Pouch, model 16C003, is a wheelchair side pouch designed for use by wheelchair users. The pouch is designed to fit wheelchairs with desk-length arms and can also be used with walkers. It is made of leatherette material. DIMENSIONS: 8 x 9 inches.

Wheeled Walker With Hand Brakes (Model 6206)

Hand operated brakes attach to wheel to prevent movement. Brake handle is attached to handrail and is operated by downward pressure. May be installed on any Invacare walker.

 
Processing...


Driving Walking/Biking Public Transit  Get Directions