Environmental Adaptations

Results: 2016

Relax

Relax is an accessible infrared (IR) learning remote that comes updated and is designed to provide simplified control of almost any IR device. With a light touch or with the use of one switch, an individual can control up to eight functions on the preferred IR device. It is designed for people with physical and motor disabilities. It can also be used by people with learning and cognitive disabilities. 

1/2-Inch & 3/4-Inch Wall Valves - Lever Handle (Models 818/013 & 818/014)

The 1/2-Inch and 3/4-Inch Wall Valves - Lever Handle are single-lever shower controls designed for use by individuals with fine motor or grasping disabilities. This wall-mounted, cast- brass valve has a single-lever handle to control on/off and volume functions in a shower system. The valve is available with either 1/2-inch (model 818/013) or 3/4-inch (model 818/014) NPT National Pipe Thread) standard threading. COLOR: Brushed nickel, diamond, platinum nickel, or polished chrome finish.

1100 Handrail

The 1100 Handrail is a handrail designed for use by individuals with balance, lower extremity, walking or mobility disabilities. The handrail angles toward the wall for greater wall protection. It is mounted on a 0.080-inch thick, continuous aluminum retainer, and it is covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl cover. The grip is 1.5 inches in diameter and it extends 3.75 inches from the wall. All mounting fasteners are included with the handrail. DIMENSIONS (LxH):

120 Angle Grab Bar For Wall

Stainless steel straight grab bar, with extension support. 1, 1 1/4 or 1 1/2 inch diameter, 1 1/2 inch wall clearance. Satin finish. Exposed or concealed mount. 12 inches long, with 12 inch perpendicular extension.

1200 Handrail

The 1200 Handrail is a handrail designed for use by individuals with balance, lower extremity, or mobility disabilities. The handrail provides a gripping surface with ergonomically designed handrail thumb groove. It is mounted on a 0.080-inch thick, continuous aluminum retainer; and is covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl cover. The grip is 1.5 inches in diameter and it extends 3 inches from the wall. All mounting fasteners are included with the product. DIMEN

1200 Handrail

The 1200 Handrail is a handrail designed for use by individuals with balance, lower extremity, or mobility disabilities. The handrail provides a gripping surface with an ergonomically designed thumb groove. It is mounted on a 0.08-inch thick, continuous aluminum retainer; and is covered with a 0.08-inch thick, scratch- and stain-resistant rigid vinyl cover. The grip is 1.5 inches in diameter, and it extends 3 inches from the wall. All mounting fasteners are included with the product. DIMENSIONS

1255 Handrail

The 1255 Handrail is a handrail designed for use by individuals with balance, lower extremity, or mobility disabilities. The handrail provides a gripping surface with ergonomically designed handrail thumb groove. It features a 2.5-inch high accent strip available in a selection of colors, patterns, finish options and custom colors. The 1255 is mounted on a 0.08-inch thick, continuous aluminum retainer; and is covered with a 0.08-inch thick, scratch and stain resistant rigid vinyl cover. The grip

130Bn Bluenose Surface Mount Corner Guard

The 130BN BlueNose Surface Mount Corner Guard is designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. This product features vinyl retainer which is nearly four times stronger than aluminum retainer, preventing chipped plaster or paint or torn wallpaper resulting from bumping by wheelchairs, scooters, walkers, crutches, or canes. The 130BN is lightweight and comes with top and bottom caps. The angle measures 135 degrees. DIMENSIONS: The wing is 3 inc

150 Surface Mount Corner Guard

The 150 Surface Mount Corner Guard is designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. This product features a continuous aluminum retainer that has pre-slotted holes. The guard can also be used to conceal previous dings and scrapes. Top and bottom caps are included with every unit and can be color coordinated. The angle measures 90 degrees. DIMENSIONS: The wing is 3 inches wide on each side. The rigid vinyl cover is 0.080 inch thick, and the co

160F Flush Mount Corner Guard

The 160F Flush Mount Corner Guard is designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. This product offers minimum design interruption by creating a smooth transition from wall to corner. The 160F is mounted on a sturdy 0.070-inch pre-punched continuous aluminum retainer. Mounting fasteners and closure caps are included with the product. DIMENSIONS: The wing is 2 inches wide on each side with a 90-degree corner angle. The scratch and stain resist

170Fr G2 Bioblend Fire Rated Corner Guard

The 170FR G2 BioBlend Fire Rated Corner Guard is designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. This product meets fire codes with the choice of one- or two-hour fire rating, and offers minimum design interruption by creating a smooth transition from wall to corner. The 0.080-inch non-PVC cover is manufactured with G2 blend Bio-PolyPETG+, which is made with a corn-based biopolymer and recycled content. The 170FR has an easy-wrap cover base aro

2-Lever Great Grips

The 2-Lever Great Grips are grasping aids for a door knob designed for use by individuals with arthritis, grasping disabilities, or upper extremity neuromuscular disabilities. Designed for round or awkward door knobs, this device has two flat levers that extend from opposite sides of the grip. The levers that are intended to make it easier to turn door knobs with a closed fist, elbow, or even a single finger. The Great Grips are made of soft material that easily stretches to fit the knob and bec

200 Series Hand / Hair Dryer

The 200 Series Hand/Hair Dryers are electric dryers designed for one handed use in public restrooms. The cover, nozzle, and pushbutton are made of rust and corrosion free diecast zinc with satined chrome over a nickel finish. The motor is a PSC induction motor (brushless), 1/10 HP, thermally protected, with self aligning quiet bearings and resilient ring motor mounts. The heating element is a 2000 watt nickel chromium blower that is inlet mounted (inaccessible through the nozzle), and protected

200 Series Towel Dispenser (Model 250-15)

The 200 Series Towel Dispenser ##250-15 is a wall mounted dispenser of paper towels designed for use in public rest rooms. The unit is fabricated of 22 gauge stainless steel with exposed surfaces in architectural satin finish. The dispenser has smooth corners and a tumbler lock. The cabinet is hinged at the bottom to allow facilitated filling. The refill indicator slot is located on the face of the cabinet. The dispenser opening has a rolled edge. The unit is surface mounted on the wall with mou

2000 Handrail

The 2000 Handrail is a handrail designed for use by individuals with balance, lower extremity, or mobility disabilities. The handrail is mounted on a 0.080-inch thick, continuous aluminum retainer, and it is covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl cover. The grip is 2.25 inches in diameter. All mounting fasteners are included with the product. The removable bottom access plate allows the handrail to be fastened to the wall. DIMENSIONS (LxD): 12 feet x 1.25 inches

2000W Handrail

The 2000W Handrail is a handrail designed for use by individuals with balance, lower extremity, or mobility disabilities. The handrail is mounted on a 0.080-inch thick, continuous aluminum retainer; and is covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl cover. The 2000W is manufactured with Woodland pattern full wrap, and includes all mounting fasteners and black reveals for returns and corners. The removable bottom access plate allows the handrail to be fastened to the

3-Inch Rock-N-Stop Footrest

The 3-Inch Rock-N-Stop Footrest is a footstool designed for use by individuals with lower extremity, circulatory, or back disabilities who spend long periods sitting at a desk. The unit is designed to promote proper positioning of the feet while sitting to reduce strain on neck and back muscles. The Rock-N-Stop features corrugated rubber rockers that allow for smooth motion as well as steady positioning at a desired footrest angle, a platform constructed of MDF covered with durable vinyl, and ch

3000/3055 Handrail

The 3000/3055 Handrail is a handrail designed for use by individuals with balance, lower extremity, mobility or walking disabilities. The handrail's gripping surface has an ergonomically designed thumb groove and delivers impact protection with a 0.070-inch continuous impact bumper. It is mounted on a 0.080-inch thick, continuous aluminum retainer, and it is covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl cover. The handrail has a 1.5-inch diameter grip, and it extends 3

3000W/3055W Handrail

The 3000W/3055W Handrail is a handrail designed for use by individuals with balance, lower extremity, mobility or walking disabilities. The handrail's gripping surface has an ergonomically designed thumb grip and delivers impact protection with internal vinyl bumper. It is mounted on a 0.080-inch thick, continuous aluminum retainer; and is covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl cover. The handrail has a 1.5-inch diameter grip with a wood grain surface, and it ex

32-Foot Wheelchair Accessible Restroom Trailer

The 32-Foot Wheelchair Accessible Restroom Trailer is a portable accessible restroom designed for use by individuals with mobility disabilities or spinal cord injury. This unit provides a wheelchair accessible restroom on a trailer equipped with air conditioning and heating, hardwood floors, oak paneling, and brass fixtures. The wheelchair accessible section has one accessible private toilet stall. The trailer also includes non-wheelchair accessible sections for men and women. The ladies' restro

3500Vw Silhouette Woodland Faux Wood Handrail

The 3500VW Silhouette Woodland Faux Wood Handrail is a handrail designed for use by individuals with balance, lower extremity, mobility or walking disabilities. The handrail provides a hand grasp for all users and protects interior walls from damage using a 0.070-inch continuous impact bumper with a faux wood finish below the handrail. The handrail and bumper are mounted on a 0.080-inch continuous aluminum retainer and are covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl

36 Inch Ada Transfer Shower ( Model Xst 4036 Bf. 5)

The 36 inch Transfer Shower, model XST 4036 BF. 5, is a one-piece gel-coat transfer shower designed for individuals with lower extremity disabilities. A 90-degree self-trimming dry wall flange maximizes wheelchair turning radius, allowing closer and safer wheelchair-to-seat transfers. Steel plate reinforcements are standard for thermoplastic over steel grab bars and seat. This model offers a four-inch tile finish, a textured slip resistant floor, a leg ledge and soap/shampoo ledges. The half-in

36 Inch Ada Transfer Shower (Model Xst 3699 Bf .5)

The 36 inch Transfer Shower, model is a one piece gel-coat shower with built-in grab bar and seat, model XST 3699 BF .5, designed for use by individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars and seat. This model offers a four- inch tile finish, a textured slip resistant floor, and soap/shampoo ledges. The half- inch tri-cell wall construction creates exceptional structural strength. The included handshowerkit has nyl

36 Inch Ada Transfer Shower (Model Xst 3938 Bf. 5)

The 36 inch Transfer Shower, model XST 3938 BF. 5, is a one-piece gel-coat transfer shower with built-in grab bar and seat designed for use by individuals with lower extremity disabilities. A 90- degree self-trimming dry wall flange maximizes wheelchair turning radius, allowing closer and safer wheelchair-to-seat transfers. Steel plate reinforcements are standard for thermoplastic over steel grab bars and seat. This model offers a six-inch tile finish with diamond accents, a textured slip-resis

36 Inch Ada Transfer Shower (Xst 3838 Bf 1.25)

The 36 inch Transfer Shower, model XST 3838 BF 1.25, is a one- piece gel-coat transfer shower with built-in grab bar and seat designed for use by individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars and seat. This model offers a six-inch tile finish with diamond accents, a textured slip resistant floor, leg ledges and soap/shampoo ledges. The half- inch tri-cell wall construction creates exceptional structural strength. Th

3M Safety Walk 710 Anti-Slip Tape

3M Safety Walk 710 Anti-Slip Tape is anti-skid floor covering for indoor or outdoor use. Designed for the decks of U.S. Coast Guard cutters, it is available for commercial or residential use. The tape has a larger grit surface to provide friction in the wettest conditions. The tape is pressure-sensitive. It is available in tape or custom, die-cut form. Replacement sets are available to allow installation if a section is damaged. DIMENSIONS (WxL): Tape rolls are 24 inches x 30 feet. Custom sizes

3M Safety-Walk Slip-Resistant General Purpose Tape - 600 Series

3M Safety-Walk Slip-Resistant General Purpose Tape – 600 Series is anti-skid tape designed for use to prevent slipping on floors and stairs. The tape has a mineral coated, high traction surface with pressure-sensitive adhesive backing. The adhesive is covered by a removable protective liner. The tape can be applied to flat surfaces, stairs, ramps, or entrances with light to heavy traffic. DIMENSIONS (LxW): 60 feet x 0.75, 1, 2, 4, 6, 12, 18, 24, 36, or 48 inches, or 2 feet x 6 inches. COLOR: Bla

3M Stamark Ada Pavement Marking Symbol

The 3M Stamark ADA Pavement Marking Symbol is a parking area access sign designed to be applied to the ground surface. The sign is constructed of a highly reflective, skid-resistant flexible material that will conform to irregular pavement surfaces. The material resists dirt and oil, and it won't chip, peel, or wear off. The sign uses the universal color (blue) and international access symbol is easily recognized by everyone, day or night. INSTALLATION: A strong adhesive keeps the marker securel

4 Station Franklin Voting Booth

The 4 Station Franklin Voting Booth is a wheelchair accessible voting booth designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This booth has four stations for voters and provides privacy for voters with and without disabilities. One station meets the ADAAG (Americans with Disabilities Act Accessibility Guidelines) requirements for approach, leg clearance, and height. This station has a lower writing shelf for use by wheelchair users or individua

4-Inch Tile Grip Portable Grab Bar

The 4-Inch Tile Grip Portable Grab Bar is a wall grab bar designed for use by individuals with balance and mobility disabilities. This grab bar features a telescoping handle that extends to adapt to most tile configurations and secures with large suction cups to most clean, smooth, flat surfaces without tools. When the unit is in place, pressing the top and bottom levers down locks the unit in place. Lifting the levers up releases the bar from the wall, allowing it to be removed as needed. DIMEN

6-Inch Rock 'n Stop Footrest

The 6-Inch Rock 'N Stop Footrest is a footstool designed for use by individuals with lower extremity, circulatory, or back disabilities who spend long periods sitting at a desk. The unit is designed to promote proper positioning of the feet while sitting to reduce strain on neck and back muscles. The Rock 'N Stop features corrugated rubber rockers that allow for smooth motion as well as steady positioning at a desired footrest angle, a platform constructed of MDF covered with durable vinyl, and

6-Seater Picnic Table- Fits 1 Wheelchair

This product is designed for people who use wheelchairs. It is a 6-seater picnic table and has room for a wheelchair to also be seated at the table. It is made from high-pressure wood from sustainable sources – FSC Certified. Item will arrive “flatpacked” to save transport costs. Shipping cost included.

60 Inch Curbless Shower (Sxt6333 Bf .75)

The 60 inch Curbless Transfer Shower, model SXT6333 BF .75, is a one piece gel-coat transfer shower with built-in seat and grab bar designed for use by individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars and seat. This model offers a two-inch apron and a four- inch tile finish with diamond accents, a textured slip resistant floor, seat-height storage ledges, and soap/shampoo ledges. The half- inch tri-cell wall constructi

60 Inch Curbless Shower (Sxt6337 Bf1.25)

The 60 inch Curbless Transfer Shower, model SXT6337 BF1.25, is a one piece gel-coat transfer shower with built-in seat and grab bars designed for use by individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars and seat. This model has a 1.25-inch steel reinforced threshold, a six-inch tile finish with diamond accents, a textured slip resistant floor, a leg ledge, and soap/shampoo ledges. The half- inch tri-cell wall constructio

60 Inch Curbless Shower (Sxt6437 Bf .75)

The 60 inch Curbless Transfer Shower, model SXT6437 BF .75, is a one piece gel-coat transfer shower with built-in seat and grab bars designed for use by individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars and seat. This model offers a three-quarter-inch steel reinforced threshold, a six- inch tile finish with diamond accents, a textured slip resistant floor, a leg ledge, and soap/shampoo ledges. The half- inch tri-cell wal

800 Handrail

The 800 Handrail is a handrail designed for use by individuals with balance, lower extremity, walking or mobility disabilities. The handrail provides protection for a wall and support for users. It is mounted on a 0.080-inch thick, continuous aluminum retainer, and it is covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl cover. The grip is 1.5 inches thick, and it extends 3 inches from the wall. All mounting fasteners are included with the product. DIMENSIONS (LxH): 12 feet

800 Series 120 Degree Angle Wall Grab Bar For Toilet (Model 004)

The 800 Series 120 Degree Angle Wall Grab Bar for Toilet ##004 is a stainless steel wall mounted grab bar. This bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. DIMENSIONS: Both segments of the bar are 12 inches each; mountings are 21 inches apart. Tubing comes in 1, 1.25, or 1.5 inch diameters. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip with Polished Finish. WEIGHT: 3 pounds.

800 Series 90 Degree Angle Wall Grab Bar For Toilet (Models 005 & 006)

The 800 Series 90-Degree Angle Wall Grab Bar for Toilet ##005/006 is a stainless steel wall mounted grab bar. This grab bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. The bar comes in right (##006) or left (##005) handed configurations. DIMENSIONS: Bar extends vertically 32 inches and horizontally 16 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip with Polish

800 Series 97 Degree Angle Wall Grab Bar For Toilet (Models 040 & 041)

The 800 Series 97 Degree Angle Wall Grab Bar for Toilet ##040/041 is a stainless steel wall mounted grab bar. This bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. Available with right (##041) or left (##040) handed configurations. DIMENSIONS: Bar extends 32 inches vertically, and 9 inches horizontally with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip with Polished Fini

800 Series Corner Wall Grab Bar For Toilet (Model 059)

The 800 Series Corner Wall Grab Bar for Toilet ##059 is a stainless steel wall mounted safety bar. The bar consists of two perpendicular sections that extend from the walls 6 inches. This corner bar attaches in three places, two on the side wall and one on the back wall. This grab bar is available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. DIMENSIONS: 36 x 52 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard Satin, Sanitary Safety G

800 Series Corner Wall Grab Bar For Toilet (Models 119 & 120)

The 800 Series Corner Wall Grab Bar for Toilet ##119/120 is a stainless steel grab bar configured for end or corner stalls. The grab bar consists of a U-shaped bar that goes on the open side of the toilet, and a perpendicular bar that mounts on the wall side of the toilet 5 inches from the opposing wall. These grab bars are avaialble with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. Configurations for right (##120) or left (##119) handed mounting. DIMENSIO

800 Series Grab Bar For Bathtub (Model 021)

The 800 Series Grab Bar for Bathtub ##021 is a stainless steel wall to floor grab bar designed for the wall end of a bathtub. The support consists of a U-shaped horizontal bar that attaches to the wall and 2 perpendicular bars that mount in the floor on either side of the tub. This bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 40 x 12 x 32 inches with 1, 1.25, or 1.5 inch diameter tubing. WEIGHT: 8 to 10 pounds. FINI

800 Series Grab Bar For Bathtub (Model 024)

The 800 Series Grab Bar for Bathtub ##024 is a stainless steel wall mounted grab bar designed for use at the wall end of a bathtub. The support consists of a U-shaped bar with support extensions at either end. The bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 40 x 12 x 6 inches with 1, 1.25, or 1.5 inch diameter tubing. WEIGHT: 6 to 7 pounds. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Gr

800 Series Grab Bar For Bathtub (Models 023 & 022)

The 800 Series Grab Bar for Bathtub ##023/022 is a stainless steel wall mounted grab bar for corner tub applications. The bar consists of an L-shaped horizontal bar that attaches to both walls, and a vertical bar that mounts in the floor. These grab bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. Available in right (##022) or left (##023) handed configurations. DIMENSIONS (LxWxH): 40 x 8.5 x 32 inches with 1, 1.25, or 1.5 inch diameter

800 Series Grab Bar For Bathtub (Models 026 & 027)

The 800 Series Grab Bar for Bathtub, ##026/027, is a stainless steel corner wall grab bar designed to be wall mounted at the corner end of the tub. The bar consists of one L-shaped bar and one support extension. These grab bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. Available in right (##026) or left (##027) handed configurations. DIMENSIONS (LxWxH): 40 x 12 x 6 inches with 1, 1.25, or 1.5 inch diameter tubing. WEIGHT: 4 to 5 pound

800 Series Grab Bar For Bathtub (Models 031 & 030)

The 800 Series Grab Bar for Bathtub ##030/031 is a stainless steel wall mounted grab bar designed for corner tub applications. The bar consists of an L-shaped horizontal bar with a perpendicular upright at one end. These bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. Available with right (##030) or left (##031) handed configurations. DIMENSIONS (LxWxH): 36 x 20 x 24 inches with 1, 1.25, or 1.5 inch diameter tubing. WEIGHT: 7 to 8 poun

800 Series Grab Bar For Shower (Model 007)

The 800 Series Grab Bar for Shower ##007 is a stainless steel wall mounted grab bar designed for shower applications. The support consists of a U-shaped bar that attaches to the wall in 4 places. This bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 25 x 1.5 x 34 inches with 1, 1.25, or 1.5 inch diameter tubing. WEIGHT: 8 to 9 pounds. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip with Pol

800 Series Grab Bar For Shower (Models 032 & 033)

The 800 Series Grab Bar for Shower ##032/033 is a stainless steel wall mounted grab bar for corner shower applications. The support consists of an L-shaped bar that attaches to the wall at two points on the vertical bar and one point on the horizontal bar. These bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. Available in right (##033) or left (##032) handed configurations. DIMENSIONS (LxWxH): 24 x 1.5 x 34 inches with 1, 1.25, or 1.5

800 Series Grab Bar For Shower (Models 034 & 035)

The 800 Series Grab Bar for Shower ##034/035 is a stainless steel wall mounted grab bar for corner shower applications. The support consists of an L-shaped horizontal bar with a perpendicular upright at one end. This bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. Available in right (##035) or left (##034) handed configurations. DIMENSIONS (LxWxH): 26 x 26 x 24 inches with 1, 1.25, or 1.5 inch diameter tubing. WEIGHT: 6 to 7 pounds. FINIS

800 Series Grab Bar For Toilet (Model 039)

The 800 Series Grab Bar for Toilet ##039 is a stainless steel floor mounted safety frame for a toilet. The frame consists of two parallel rails that form an upside down U shape and mount in the floor at 4 places. A perpendicular rail runs behind the toilet and connects the two rails. These grab bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 22 x 22 x 28 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Stan

800 Series Grab Bar For Toilet (Model 054)

The 800 Series Grab Bar for Toilet ##054 is a stainless steel wall to floor grab bar for unilateral support when accessing a toilet. The support consists of an L-shaped bar bent at 90 degrees that attaches to the wall and to the floor with a 3-inch extension at the floor mounting. This bar is available with a concealed or exposed mounting. DIMENSIONS (LxH): 33 x 30 inches with either 1.25 or 1.5 inch diameter tubing (1-inch tubing not available with this bar). WEIGHT: 6 to 7 pounds. FINISH: Stan

800 Series Grab Bar For Toilet (Models 001 & 002)

The 800 Series Grab Bar for Toilet ##001/002 is a stainless steel, wall mounted straight bar designed for horizontal attachment next to a toilet. This support attaches to the wall in two places for lengths up to 54 inches (##001), and has a center support mount for lengths over 54 inches (##002). This bar is available with concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. DIMENSIONS: Model 001 is available in the following lengths: 12, 16, 18, 24, 30, 32, 36, 42,

800 Series Grab Bar For Toilet (Models 010 & 011)

The 800 Series Grab Bar for Toilet ##010/011 is a stainless steel wall to floor grab bar for unilateral support while accessing a toilet. The support consists of an L-shaped bar bent at 90 degrees that attaches to both the wall and the floor, and an outrigger, or extension floor mount. These bars are available with a concealed or exposed mounting, right (##011) or left (##010) handed configuration, and have a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 30 x 6 x 33 inches with 1

800 Series Wall Grab Bar For Toilet (Model 003)

The 800 Series Wall Grab Bar for Toilet ##003 is a stainless steel grab bar that consists of a straight bar with a center post and one end return. This grab bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. DIMENSIONS: 48, 52, or 54 inch standard lengths with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip with Polished Finish. WEIGHT: 5 to 6 pounds.

800 Series Wall Grab Bar For Toilet (Model 012)

The 800 Series Wall Grab Bar for Toilet ##012 is a stainless steel wall to floor double bar for toilets. The grab bar consists of two parallel bars that go on either side of the toilet, like a safety frame, with one perpendicular bar situated approximately 5 inches from the wall, when mounted. These grab bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 30 x 24 x 33 inches with 1, 1.25, or 1.5 inch diameter tubing. FI

800 Series Wall Grab Bar For Toilet (Model 117)

The 800 Series Wall Grab Bar for Toilet ##117 is a stainless steel wall mounted grab bar. The frame consists of 2 U-shaped railings with a perpendicular bar between rails situated 5 inches from the wall when mounted. These grab bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 24 x 24 x 16 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip wi

800 Series Wall Grab Bar For Toilet (Models 115 & 116)

The 800 Series Wall Grab Bar for Toilet ##115/116 is a stainless steel U-shaped grab bar with extension support. These grab bars are available with a concealed or exposed mounting. All styles have a standard safety clearance of 1.5 inches, and are available in Right (##116) or Left (##115) handed configurations. DIMENSIONS: 16 x 24 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard, Sanitary Safety Grip, Bright Polished, or Safety Grip with Polished Finish. WEIGHT: 6 pounds.

800W Woodland Faux Wood Handrail

The 800W Woodland Faux Wood Handrail is a handrail designed for use by individuals with balance, lower extremity, walking or mobility disabilities. The handrail is mounted on a 0.080-inch thick, continuous aluminum container, and it is covered with a 0.080-inch thick, scratch and stain resistant rigid vinyl cover. The grip is 1.5 inches thick, and it extends 3 inches from the wall. The 800W is manufactured with Woodland pattern full wrap, and includes all mounting fasteners and black reveals for

855 Handrail

The 855 Handrail is a handrail designed for use by individuals with balance, lower extremity, or mobility disabilities. The handrail features a 3.19-inch high wayfinding accent strip available in a selection of colors and patterns. It is mounted on a 0.08-inch thick, continuous aluminum retainer, and it is covered with a 0.08-inch thick, scratch- and stain-resistant rigid vinyl cover. The grip is 1.5 inches in diameter, and it extends 3 inches from the wall. All mounting fasteners are included w

90 Degree Grab Bar

The 90 Degree Grab Bar is a wall mounted grab bar designed for use by individuals with balance or mobility disabilities or spinal cord injury. It features vertical and horizontal bars at right angles in either a left- or right-handed configuration. OPTIONS: Slide hook. DIMENSIONS: Vertical and horizontal bars are available in any combination of 12, 16, 24, or 32 inches. COLOR: Available finishes include polished chrome, antique brass, polished brass, polished nickel, satin chrome, satin nickel,

900 Handrail

The 900 Handrail is a handrail designed for use by individuals with balance, lower extremity, mobility or walking disabilities. The handrail is mounted on a 0.080-inch thick, continuous aluminum retainer; and is covered with a scratch and stain resistant, 0.080-inch thick vinyl cover. The 900 has a 1.5-inch diameter grip, and it extends 3 inches from the wall. All mounting fasteners are included with the product. DIMENSIONS (LxD): 12 feet x 1.5 inches. COLOR: Available in a variety of colors and

A*com System

The A*Com System is a modular ramp system designed to provide wheelchair access to dwellings and other structures. The system includes ramps, steps, and platforms. The system is customizable and can be reconfigured and/or relocated. The platform and steps come with a guardrail, plus an additional grasping rail for the steps. Steps come in flights of three to eight individual steps. DIMENSIONS (LxW): Platforms are 64 x 64 or 60 x 48 inches, with a 42-inch guardrail. Ramps are 60 x 48, 72 x 48, 96

A-Frame Voter Parking Sign With Handicap Symbol (Model Sg-167)

The A-Frame Voter Parking Sign with Handicap Symbol, model SG-167, is a parking area marker for a polling place to indicate parking that is accessible to voters with disabilities at polling sites. The sign features the International Access symbol beneath the words, "Voter Parking." The picture and text are pre-printed on both sides of an A-shaped frame made of corrugated plastic. DIMENSIONS (HxW): 30 x 15 inches. COLOR: Blue print on white background.

A.b.e. End Drain Wheelchair Access Shower Pan (Model Bf-6030)

The A.B.E. End Drain Wheel Chair Access Shower Pan, model BF-6030, is a wheelchair accessible shower pan designed for use in building roll-in showers. The pan is made in a single, molded piece with a slip-resistant floor, an integral molded drain, a single threshold, and a flange on three sides. The pan is available with either a left or right drain. OPTIONS: 12 x 60 inch access ramp, model BF-1260; flexible threshhold, model BF-FT. DIMENSIONS (LxW): 30 x 60 inches. The drain is 2 inches in diam

A1A Ultimate Edition Tub

The A1A Ultimate Edition Tub is a walk in whirlpool bathtub designed for use by individuals with lower extremity or mobility disabilities or arthritis. The tub is constructed of heavy-duty reinforced fiberglass composites with a high gloss triple gel resin finish. It has a free standing stainless steel support frame with six adjustable leveling feet, two side panels, two technical front access panels, a tile flange, a non-slip seat and tub floor, and a safety grab bar. It has an integrated 42 li

Abby Superglide Stair Lift

The Abby Superglide Stair Lift is an interior or exterior seat lift designed for use by individuals with lower extremity, mobility, or walking disabilities. Installed on a stairway, this unit moves the user up or down the stairs on a swivel seat. It has a smooth start-and-stop option, a handheld remote control, a joystick control, and five safety sensors to detect possible obstructions on the steps. Models include the standard lift, a space saver lift, an outdoor lift, a curved rail stair lift,

Able Table

The Able Table is a height-adjustable tilt-top work table and overhead bookholder designed for use by individuals who use wheelchairs or eith severe physical disabilities or spinal cord injury. This unit lifts books for eye-level or overhead reading within a range of 9 to 18 inches high. Springs provide the lifting power. The unit is designed so that the book will stay where placed: up or down, left or right, at any angle without adjustment of knobs or levers. A single knob locks the top in plac

Ableware 704401000 Corner Seat/Positioning Aid

This product is designed to promote head and upper extremity control in order to encourage the development of fine motor control. The corner seat stabilizes the shoulders, pelvis and trunk and facilitates the arms and shoulders to come forward which increases arm movements and allows the child to work on activities in the midline. Features an H-strap for anterior trunk support, a hip belt to maintain proper position and an abductor block to help maintain leg extension and reduce extensor thrust.

Ableware 706010000 Laptop Wheelchair Desk

Laptop Wheelchair Desk is designed for people that use a wheelchair. Roomy storage beneath the lid for lap top computers, business files, and personal items. Durable plastic clip on the inside of the lid holds books and newspapers open. Adjustable lid tilts forward for reading and writing; lies flat for lap top use and other activities. Tray top recesses securely hold paper clips, cups, cell phones, pens, etc.

Ableware 706160000 Wheelchair Carry-All

The Wheelchair Carry-All is designed as backpack for the wheelchair. The wheelchair user or the caregiver can attached to the back of the wheelchair. A full-width pocket inside helps keep things in order.

Ableware Door Knob Gripper

The ABLEWARE Door Knob Gripper is a grasping aid for hand designed for use by individuals with arthritis of the hand or fingers or other grasping disabilities. The Gripper fits over round door knobs and outdoor water faucets. The outside is smooth to the touch and the inside is ribbed to firmly grip the door knob. With this device, knobs can be turned with the stroke of the hand, and no hand strength is required.

Ableware Tko Turning Knob Operator (Model H75310)

The Ableware TKO Turning Knob Operator is designed to assist individuals with limited manual strength or dexterity to grasp, turn, and open any non-round control knob or appliance handle. The turner consists of a large T-handle attached to a large round base with retractable pins on its bottom. When the turner is pressed onto a knob the pins contacting with the knob’s surface retract, while the remaining pins surround the knob for a secure grip. The turner can be used on irregular knobs, includi

Access Route (With Handicap Access Symbol) Suction Cup Sign (Model 2050)

The Access Route (with Handicap Access Symbol) Suction Cup Sign, model 2050, is an access sign designed for use to indicate a wheelchair accessible route. The sign has the words "Access Route" above the International Access Symbol, a stylized drawing of a figure seated in a wheelchair. This sign can be hung in a window. The sign comes with 3 suction cups installed on the face of the sign, and a box for storage and transport. This sign is compatible with the Voter's Choice Portable Sign System. D

Access Route Barricade Tape (Model 2110)

Access Route Barricade Tape, model 2110, is a wheelchair access sign designed to mark an accessible route or pathway for individuals with lower extremity or mobility disabilities or spinal cord injury. The tape in this roll repeats the phrase, "Access Route," and the International Access Symbol, a stylized drawing of a figure seated in a wheelchair. DIMENSIONS (LxW): 200 feet x 3 inches. COLOR: Blue with white letters and symbol.

Access Route Sign (Model Sg-110F)

The Access Route Sign, model SG-110F, is an access sign designed for use to provide directional guidance for wheelchair users. The sign has a disabilities symbol (a stylized drawing of an individual in a wheelchair) with the word "Access" above the symbol and the word "Route" below. The sign is made from corrugated plastic for all weather conditions and attaches to the Corrugated A-Frame (model SG-F), which is sold separately. DIMENSIONS (HxW): 22 x 14 inches. COLOR: Blue and white.

Access Route With Handicap Symbol Sign (Model 1992)

The Access Route with Handicap Symbol Sign, model 1992, is an access sign designed for use to indicate a wheelchair accessible route. The sign is made of durable plastic and is screen printed on both sides with the words "Access Route" above the International Access Symbol, a stylized drawing of a figure seated in a wheelchair. It fits the Voter's Choice Portable Sign System (not included). DIMENSIONS (HxW): 16.25 x 10 inches. COLOR: White letters and drawing on a blue background.

Access Stairs

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted set of stairs to access a bed for a child with cerebral palsy, developmental delay, and vision and hearing impairment. The child required a raised bed with side railings to keep her safe at night, but it had to be easily accessible without caregivers having to bend over when caring for the child. The bed is 880 millimeters above the floor and has fixed railings on three sides; the railing on the fourth side slides up and do

Access Steps For Bathtub

CUSTOM ADAPTATION PURPOSE: To enable a teenage girl with short stature to independently enter and exit a bathtub. A stainless steel rail was installed along the side of the tub that extended five millimeters out from it. A three-step ladder was made of stainless steel tubing that clips to the rail for stability. The ladder also slides along the rail if needed. A trough of plastic downspout pipe clips over the tub to protect the tub edge from the ladder. Stair treads for the ladder were made of

Access4U Mini Wheelchair Ramps

Access4U Mini Wheelchair Ramps are designed for use to make steps or other rises wheelchair accessible. These lightweight ramps can be used semi-permanently on one to two steps. They have a welded aluminum frame with an aluminum skid-resistant deck. DIMENSIONS (LxW): 2, 3, 4, 5, or 6 feet x 30 or 36 inches. Custom sizes are available. CAPACITY: 600 pounds.

Access4U Modular Wheelchair Ramp

The Access4U Modular Wheelchair Ramp is a modular ramp designed to provide wheelchair access for individuals with mobility disabilities or spinal cord injury. These ramps are assembled from stock sections and can be configured to the user's home for permanent use on two or more steps. Modular systems include an aluminum frame, a two-rail handrail, an entry plate, adjustable legs, an ADA curb, vinyl or aluminum no-skid decking, an exit plate, and hardware. Systems are available with 90-degree tu

Access4U Portable Folding Ramp

The Access4U Portable Folding Ramp is a portable ramp designed for use by individuals with mobility disabilities or spinal cord injury. This ramp provides wheelchair access over one or two steps or a curb. The ramp is made of welded aluminum and folds to fit in a car trunk or van. DIMENSIONS (LxW): 2, 3, 4, 5, or 6 feet x 30 or 36 inches. Custom sizes are also available. CAPACITY: 600 pounds.

Accessabath Bath Safety System (Models Ab603072Sa And Ab603072Sa-Wc)

The AccessaBath Bath Safety System, models AB603072SA and AB603072SA-WC, is a roll-in shower with a seat and grab bars designed for use by individuals who use wheelchairs and individuals with balance or mobility disabilities. System components include one wheelchair accessible shower pan (models FBF-3060L or FBF-3060R) or retro-fit shower pan (models FBF-3260L or FBF-3260R); one barrier free ramp (model BF1260); one flexible threshhold (model BF-FT); one folding-L transfer seat (model HS 553N) o

Accessible Entrance Sign

Accessible Entrance Signs are wheelchair access signs designed for use by individuals with mobility disabilities. Signs include the international accessibility symbol with either a left arrow, a right arrow, or no arrow. Signs are made from a heavy-gauge sign grade aluminum alloy. The corners are rounded and the edges are smoothed to prevent injury. Holes for mounting are located in the middle top and bottom to match standard sign posts. The signs are non-reflective with a painted and baked-on e

Accessible Entry System (Model Aes-2000)

The Accessible Entry System, model AES 2000, is a building entry system designed for use by individuals who are blind or have low vision. The system includes a large print and voice output tenant directory with both written and verbal operating instructions. The system's visual display uses half-inch high black characters against a back-lit green background. The system incorporates the etched tactile diamond shaped EZ Help system developed by the University of Wisconsin TRACE Center. Pressing th

Accessible Kitchen Counter

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual who use a wheelchair to get under and use a counter. A molded laminate countertop can be supported by installing upright shelf tracks on the kitchen wall and adding deep shelf brackets. Wheelchairs fit underneath and the counter is thin enough to be useful. TITLE: The Accessible Kitchen Counter. WEB SITE: Workshop Solutions at http://www.workshopsolutions.com/COMPLETE/counter.htm. REF: The originator, Bruce Barney, can be contacted at efn

Accessible Living Collection - Accessible Cabinets

The Accessible Living Collection - Accessible Cabinets are accessible kitchen components designed for use by wheelchair users. These base cabinets for the kitchen feature countertops low enough to be accessible to wheelchair users, toe kicks allowing for wheelchair access, and wheelchair reachable storage options. Cabinets in the collection include an Accessible Tambour Base Cabinet, an Accessible Base Lazy Susan, an Accessible Base Cabinet with Pullout Table, an Accessible Dishwasher Base Cabin

Accessible Passenger Loading Zone Sign

The Accessible Passenger Loading Zone Sign is a wheelchair access sign designed for use by individuals with mobility disabilities. The sign includes the international accessibility symbol above the words "Accessible Passenger Loading Zone." These signs are made from a heavy-gauge aluminum alloy, with rounded corners and smoothed edges to prevent injury. Mounting holes are located in the middle top and bottom to match standard sign posts. The stroke and spacing of the letter style are designed fo

Accessible Pedestrian System

The Accessible Pedestrian System is an audible and vibrating pedestrian signal system designed to make street crossing safer for individuals who are blind, deaf, hard of hearing, or who have low vision. The system consists of a driver unit and a push button unit. The driver unit provides all the necessary electronics to drive an audio tactile transducer, located in the push button unit, which creates audible and tactile walk and don't walk signals. The audible output of the push button has three

Accessible Route Signs

Accessible Route Signs are facility access signs that display the international access symbol and a written message. Messages on these engraved Setonply acrylic signs include: Entrance, Exit, Rest Room, Women, Men, Telephone, and Accessible Route. With the exception of the "Telephone" sign, each sign is available with an arrow. MOUNTING: Foam mounting tape comes with each sign for indoor application. DIMENSIONS: 12 x 4 inches. COLORS: White lettering and graphics on green, blue, black, walnut, c

Accessible Saddle Threshold

Handicap accessible thresholds made of mill aluminum, anodized dark bronze alluminum, or mill brass, with various treads. DIMENSIONS: Thresholds have a maximum center-threshold height of 0.25, 0.31, 0.5, or 0.63 inches, with lengths of 2.5, 3, 4, 5, 6, 7, or 8 inches.

Accessible Shelves For Freezer

CUSTOM ADAPTATION PURPOSE: To enable an individual with upper extremity weakness to access the shelves of an upright freezer. The freezer enabled the user to shop for food less frequently by storing large amounts; however, the user was unable to lift items from the back of fixed shelves or reach the back of the higher ones, limiting his ability to utilize the freezer capacity. The need was for shelves that slide out individually on rollers. Replacement shelves were created by heating and bendin

Accessible Voter Parking (With Handicap Access Symbol) Suction Cup Sign (Model 2060)

The Accessible Voter Parking (with Handicap Access Symbol) Suction Cup Sign, model 2060, is a parking area marker for a polling place and access sign designed for use to indicate wheelchair accessible parking near a polling place. The sign has the words "Accessible Voter Parking" above the International Access Symbol, a stylized drawing of a figure seated in a wheelchair. It comes with three suction cups installed on its face allowing it to be mounted on the inside of a window near parking on E

Accessible Voter Parking Sign With Handicap Access Symbol (Model 2002)

The Accessible Voter Parking Sign with Handicap Access Symbol, model 2002, is a parking area marker for a polling place and access sign designed for use to indicate wheelchair accessible parking near a polling place. The sign is made of durable plastic and is screen printed on both sides with the words "Accessible Voter Parking" above the International Access Symbol, a stylized drawing of a figure seated in a wheelchair. DIMENSIONS (HxW): 16.25 x 10 inches. COLOR: White letters and drawing on a

Accesstair (Models Vmh36, Vmh42, & Vmh48)

AccesStair VMH is a platform wheelchair lift designed for use by individuals who use wheelchairs. This lift is a set of stairs with railings that, at a push of a button, converts into a vertical platform wheelchair lift. The steps slide back into the unit, similarly to a stadium bleacher system and the powder-coated steel handrails move vertically with the platform. The stairs are securely held in extended position for safe use as a stairway and retract into a stowage area under landing when the

Accuvote-Tsx

AccuVote-TSX is a voice output voting machine system designed for use by voters who are blind or have low vision. This direct record entry (DRE) voting machine system is a voter-activated, interactive touch-screen system with enhanced screen visibility for individuals with low vision and voice output through headphones to ensure voting privacy and independence for individuals who are blind. Using an intelligent Voter Card as the voter interface, this system permits voters to cast their votes eit

Acid Reflux (Ar) Pillow For Babies And Infants & Deluxe Ar Pillow For Babies And Infants

The AR Pillow for Babies and Infants is a wedge pillow designed for use with babies with gastric reflux or eating and digestive disabilities. This pillow includes a quilted poly/cotton harness and head ring to hold a newborn safely and maintain a 30-Degree angle, the optimal angle to relieve acid reflux, gastroesophageal reflux, Barrett's Syndrome, post surgical conditions, etc. naturally. The head ring is attached under the cotton pillow sheet with Velcro to the pillow surface. The quilted pill

Aco Detectable Warning Device

The ACO Detectable Warning Device is a detectable warning surface designed for use by individuals who are blind or have low vision. The polymer concrete surface is made from polyester resins reinforced with mineral aggregates and fillers, with an enhanced micro-texture design located on and between truncated domes for increased slip resistance and sound-on-cane detectability. The surface provides up to four times the compressive strength of cement concrete, with minimal water absorption to preve

Acorn Superglide 120

The Acorn Superglide 120 is an interior stair lift designed for use by individuals with balance, lower extremity, or mobility disabilities or arthritis. Designed for home use, this straight stair lift features directional paddle switches, a digital status display, smooth start/stop action, a lockable isolation switch, two infra-red remote controls, five safety sensors, electronic and mechanical braking systems, and quiet operation. The track is made of extruded aluminum. The lockable, swiveling,

Acorn Superglide Outdoor Stair Lift

The Acorn Superglide Outdoor Stair Lift is an exterior stair lift designed for use by individuals with balance, lower extremity, or mobility disabilities or arthritis. Designed for outdoor use, this lift features directional paddle switch controls, a digital status display, smooth start/stop action, a lockable isolation switch, two infrared remote controls, five safety cut-out sensors, electronic and mechanical braking systems, and quiet operation. The lockable, swiveling, padded seat has a foot

Acrovyn Handrail (Models Hrb-3C & Hrb-4C)

Hand rails serve also as bumper guards to protect person and wall. Free floating bumper guards snap over existing rails. Vinyl and acrylic rails, finished aluminum brackets and color coordinated end caps. Available in 26 colors. 1 3/4 inches clearance from wall. Rail is 2 1/4 inches thick and 5 3/8 inches high. Model HRB-3C features custom recessed color inserts; Model HRB-4C is contoured to match radiused walls.

Acrylic Special Care Unit (Model Sc4286)

Shower bathtub of reinforced fiberglass with right or left access. Cellular inner core with reinforced polyester outer protective coating for overall rigidity. Dimensions: 41 inches wide by 38 inches deep by 84 inches high outside dimensions. Weighs approximately 185 pounds. Vinyl shower curtain. 28 inch by 18 inch L shaped grab bar mounts on valve wall and backwall 34 inches above bottom of shower. 24 inch straight grab bar mounts vertically on valve wall with bottom 36 inches from floor. Textu

Acrylic Special Care Unit (Models Sc4983 & Sc4983)

Shower with built in grab bar with right or left access. Outside dimensions: 48 inches wide by 34 inches deep by 84 inches high. Door measures 76 1/2 inches by 38 inches. Weighs approximately 195 pounds. Options: custom grab bars and dome light. Above floor rough in. Fabricated of molded reinforced fiberglass. 2 stainles steel grab bars in unit: 18 inch by 23 inch L shaped wrap aound grab bar mounted on back wall of valve wall 36 inches above bottom of shower; 24 inch straight grab bar mounted v

Acrylic Special Unit (Model Sc6183)

Shower bathtub with right or left side access. Outside dimensions: 60 inches wide by 34 inches deep by 84 inches high. Weight approximately 225 pounds. Removable teakwood seat. Fabricated of molded reinforced fiberglass. Includes 5 grab bars. Two 42 inch straight grab bars mount horizontally on back wall at 24 and 36 inches from floor. One 24 inch straight grab bar mounts vertically on valve wall with bottom 41 inches from floor. 16 inch straight grab bar mounts horizontally on valve wall 36 inc

Action Sensory Room--Gold

This Action Sensory Room is designed to accommodate those individuals who have a disability that effects their temperament, who react with anger or frustration, those who have problems with concentration, those with Attention Deficit Hyperactivity Disorder (ADHD), and others who struggle with inappropriate behavior. Is intended to encourage play and build concentration as well as to relax the body and keep the mind alert. The Action Room tools include swings and rockers that provide rhythmic mov

Active Life Station

The Active Life Station is an accessible table designed for use with children and adults with severe cognitive, emotional, or physical disabilities who require constant supervision. This table system surrounds the user on all sides, with one side being a secure access door. The individual's wheelchair or feeder seat is positioned on a 360-degree rotating base in the center, enabling the user to access table surfaces on all sides. The station can be used for watching television, using a computer,

Activity Table

The Activity Table by Smirthwaite is designed for use by young children at daycare, school and home. The steel legs can be adjusted in height to ensure an upright seating posture for the child, and can easily be folded for storage. The activity table can be configured into five different layouts. OPTIONS: Suction hand grabs, dycem round non-slip round SIZES: 1 and 2 DIMENSIONS: Size 1: Height Range 15-23, Length (A) 30, Width (B) Size 2: Height Range 21-29, Length (A), Width (B) COLOR: Red sea

Activity Tray

The Activity Tray is a height adjustable tray designed for use by people with upper extremity, fine motor, grasping or neurological disabilities or conditions such as multiple sclerosis, cerebral palsy or Parkinson's. Made of rugged ABS, the Activity Tray can be set at any of 4 available heights by pulling the easy-open handle. The tray has two recessed cutouts for placing mugs or cups and can be used to place food and drink closer to a person's mouth. The Activity Tray can be reversed so that

Acu-Rite Outdoor Digital Thermometer (Model 00888A2)

The Acu-Rite Outdoor Digital Thermometer, model 00888A2, is a large print digital thermometer designed for indoor or outdoor use by individuals with low vision. Indoor and outdoor temperatures are displayed in large characters on a backlit liquid crystal display (LCD) display. Minimum and maximum temperatures are stored in memory. The unit has a plastic case with a submersible probe. POWER: Uses one triple-A battery (not included). DIMENSIONS: Probe is 10 feet long. COLOR: Gray.

Acutemp Instant Water Heater (Models 150, 180, 100, 120 & Remote)

Acutemp instant water heater is a compact tankless water heater with instant temperature selection, construction of copper, brass, stainless and solid state electronics. Width 14 1/4 inches, length 24 inches, thickness 3 1/4 inches. Turning external dial selects temperature between 40 degrees (F) and 160 degrees (F). Delivers water at a controlled, safe temperature. Controls water temperature to within 2 degrees of amount dialed. Can be mounted close to points of hot water use. Temperature selec

Ada Adaptable Roll-In Shower (Model 62060103)

The ADA Adaptable Roll-in Shower, model 62060103, is a modular roll-in shower designed to provide shower access for wheelchair users. Made from solid Vikrell material, its modular design allows it to be moved around corners and through doorways. Components include an End Wall Set (model 62065103), Receptor (model 62061100), and Back Wall (model 62062103), which snap together with tongue-and-groove installation. Features include a lightly textured swirl-gloss finish, a low profile threshold for w

Ada Adaptable Transfer Shower (Model 62050115)

The ADA Adaptable Transfer Shower, model 62050115, is an accessible modular shower stall designed for use by individuals in wheelchairs. Made of solid Vikrell, this four-piece shower stall can be moved around corners and through doorways, and be fit back together with tongue-and-groove connections. Components include a Receptor (model 62051100), End Wall Set (model 62055115), and Back Wall (model 62052113). The stall has a low-profile threshold for wheelchair access; structurally reinforced fact

Ada Bench (Model Tf5031)

The ADA Bench, model TF5031, is an accessible bench designed for use in outdoor locations. The bench is made from steel reinforced concrete, and can hold up to 3 people. Three finishes are available: Standard Weatherstone, smooth stain, and Premium Weatherstone Glass. OPTIONS: Inkjet or cast in place logo. DIMENSIONS: 48 x 26 x 17 inches. WEIGHT: 770 pounds. COLOR: Standard Weatherstone is gray, French gray, sand, buff, cream, brown, brick red, charcoal, soulard green or white; smooth stain is g

Ada Compliance Signs

The ADA Compliance Signs are designed to improve morale and encourage additional business by displaying that the facility is either in compliance with ADA regulations and/or open to suggestions about how to improve the accessibility of the facility. Messages include: Welcome. Our company is in compliance with the Americans with Disabilities Act; Our facility is Accessible and in Compliance; Please alert management if you find any area that is not accessible or needs additional assistance; We wel

Ada Compliant Classroom Sinks

ADA Compliant Classroom Sinks are accessible sinks for use in a classroom environment. The sinks are available with the faucet on the left ledge with bubbler on the right ledge or vice versa; the faucet on the rear ledge with the bubbler on the left or right ledge; or both the faucet and bubbler on the right or left ledge. Drain is located in the center unless otherwise specified. The sinks are made of seamless 18 gauge type 304 stainless steel. Interior and top surfaces polished to a satin fini

Ada Compliant Paver (Model 200)

The ADA Compliant Paver, model 200, is a detectable warning surface designed for use by individuals who are blind or have low vision. This paving stone with truncated domes provides visual as well as textural contrast to guide individuals with visual impairments on conventional publicly utilized pavements, sidewalks and other components of the public right of way, including wheelchair curb ramps at street intersections. The unit is made from a concrete mix under extreme pressure and high frequen

Ada Compliant Ultra Flush Two Piece Pressure-Assist Toilet (Models 21-317, 21-318, & 21-319)

The ADA Compliant Ultra Flush Two Piece Pressure-Assist Toilet is a tall toilet designed for use by individuals with mobility disabilities. This high, elongated toilet has a water consumption of 1.6 gallons per flush (gpf), with pressurized flushing and siphon-jet flush action. Model 21-319 features a bedpan rim. The seat is not included. DIMENSIONS (HxDxW): 30.5 x 28.25 x 20.25 inches (model 21-317), 30.5 x 28.75 x 20.25 (model 21-318), or 30.25 x 30 x 20.5 inches (model 21-319). The rim height

Ada Compliant Wall Hung Lavatory (Model Hcl-23520-T)

The ADA Compliant Wall Hung Lavatory, model HCL-23520-T, is an accessible sink for use in public restrooms and classrooms that includes a J1174KS faucet and J115FS drain. Drain locations are centered unless otherwise specified. This model is available with rear mount concealed overflow feature. The sink is made of seamless 18 gauge type 304 stainless steel. All interior and top surfaces are polished to a satin finish. Sink is undercoated with a smooth, sound-deadening material. The sink is insta

Ada Detectable Warning Paver

The ADA Detectable Warning Paver is a detectable warning surface designed for use on sidewalks, crosswalks and entries to provide tactile warnings to pedestrians who are blind or have low vision. The surface features truncated domes that can be felt underfoot or with a white cane. The paver is manufactured from recycled glass using RG Stone hardface technology. It has an extra dense surface that handles heavy traffic, harsh weathering, salt, and ice removal, and it can be cut, fit, and contoured

Ada Ez

The ADA EZ is a powered door operator designed for use doors at institutions and other high traffic areas that are manual opened and closes but occasionally require automatic operation. Upon installation, the unit determines the door's size and weight and automatically tune its controller to operate within ANSI 156.19 and 117.1 standards for door openers and closers. The ADA EZ also has adjustable speed, hold-open time, and opening/closing force. On-board diagnostics continually maintain control

Ada Fountain (Model Tf7070)

The ADA Fountain, model TF7070, is an accessible drinking fountain designed for use by wheelchair users. Made of steel reinforced concrete, this outdoor drinking fountain for parks, trails, and sports fields is configured to be accessible to an individual seated in a wheelchair. The unit comes assembled and with plumbing included. It is colored with a smooth stain, and is available with an inkjet or cast logo. DIMENSIONS (HxLxW): 34 x 39.25 x 21 inches. Reinforcing bar is 0.25 inches thick. WEIG

Ada Height Adjustable Podium (Model 70)

The ADA 70 Podium is a height-adjustable podium or lecterndesigned for use by individuals of any height or who use wheelchairs. The option of purchasing shelves and drawers is available so that audiovisual equipment can be integrated into the Podium. This podium features a fixed lectern shelf, power and cable management subsystems, external electrical outlets, a master power switch, and an input/output box. DIMENSIONS (WxDxH): 58.25 x 30.5 x 35.75 to 50.5 inches. COLOR: Mahogany woodgrain is sta

Ada Ice Machine (Model 30Ima)

The ADA Ice Machine, model 30iMA, is an under counter ice maker designed to be accessible to wheelchair users. The unit fits under countertops with lower heights, allowing an individual seated in a wheelchair to reach it. It produces up to 35 pounds of clear cubed ice per day, and stores up to 30 pounds of ice. The unit has full auto-defrost, and rrequires a gravity drain or a drain pump. Its field- reversible door has a frame that accepts a quarter-inch custom panel. OPTIONS: Marvel drain pump;

Ada Paver

The ADA Paver is a detectable warning surface designed for use by individuals who are blind or have low vision. These dry-pressed paving bricks bear a Braille-like detectable warning surface to help pedestrians with visual impairments anticipate and avoid a hazard ahead. The provision of the detectable warning surface on locations such as curb cuts and the edges of loading docks or elevated or level boarding platforms in transit stations enables most visually impaired persons to come to a stop b

Ada Ramp Thresholds (Models 442S, 443S, & 444S)

The ADA Ramp Threshold is a threshold ramp designed to provide wheelchair access for individuals with lower extremity or mobility disabilities or spinal cord injury. Model 442S provides a 1:12 slope from the floor to a point 0.5 inch higher. Model 443S provides a 1:12 slope starting from the edge of a threshold. Model 444S is a combination of 442S and 443S. Made of mill finished anodized aluminum, the ramp comes with ten 1.5-inch flat head wood screws. OPTIONS: Sure-Step non-slip abrasive coatin

Ada Restroom Sign With Braille (Models 507, 508, 509, 527, 528, & 529)

These Handicap Signs are access signs designed for use to indicate restrooms for individuals who are blind or have low vision, or to indicate wheelchair-accessible restrooms for individuals with mobility disabilities. Signs are for Men's, Women's, or unisex restrooms with or without wheelchair access, and include a pictogram of a man and/or a woman, with or without the international handicapped access symbol. The appropriate text is included (Men, Women, or Restroom for unisex restrooms). All si

Ada Series Classic Design

ADA Series Classic Design is a kitchen with accessible components designed for use by individuals with lower extremity or mobility disabilities, spinal cord injury,short stature, or other physical disabilities. This compact adjustable kitchen system includes an under-counter refrigerator, cooktop, oordinated finishes, and storage space for dry goods and cooking supplies. The Adaptable Sink Base easily converts to meet Americans with Disabilities Act specifications and the folding design stores c

Ada Stainless Steel Double Basins Sink (Model Pse-2020D)

The ADA Stainless Steel Double Basins Sink, model PSE–2020D, is a portable accessible sink designed for use by individuals who use wheelchairs. This portable accessible sink is equipped with two basins, each of which has a single lever faucet for each. The unit has a two 5-gallon tanks for fresh water and two 8-gallon tanks for waste water. An adjustable water heater allows the water temperature to be adjusted up to 145 degrees. It has six safety casters so it can be moved easily on firm flat su

Ada Stainless Steel Sink (Model Pse-2020)

The ADA Stainless Steel Sink, model PSE–2020, is a portable accessible sink designed for use by individuals who use wheelchairs. This single-compartment sink features a single handle for the faucet, and it provides hot and cold running water. The PSE–2020 has a 5-gallon tank for fresh water and a 7-gallon tank for waste water. It has a 20 AMPS Preset water heater, and it rolls on four safety casters. OPTIONS: Motion sensor and water filtration. DIMENSIONS: Cabinet (WxDxH): 34 x 18.5 x 31.75 inch

Ada Starter Kit

The ADA Starter Kit includes a sampling of products to initiate compliance to ADA regulations for public facilities. The kit includes a metal traffic sign that reads "Reserved Parking" and has the international access symbol on it; a metal secondary parking sign reading "Van Accessible" to be added underneath an accessible parking area marker to indicate those spaces wide enough for a wheelchair lift van; an engraved plastic Braille sign that reads "Rest Room" and has the men/women graphic on it

Ada Symbol Pavement Marker (Model J19-377)

The ADA Symbol Pavement Marker, model J19-377, is parking area marker designed for use in parking spaces designated for individuals with disabilities. This marker has a peel and stick back and a textured, skid-resistant surface. It features the wheelchair accessible symbol and is designed to be seen by drivers at night. DIMENSIONS (LxW): 36 x 30 inches. WEIGHT: 4 pounds. COLORS: White on blue. WARRANTY: Four- year limited warranty. DELIVERY TIME: 2 to 3 weeks.

Ada Tactile Sign - Access Left/right (Models 369L & 369R)

The ADA Tactile Sign - Access Left/Right is a braille and tactile access sign designed to indicate wheelchair access for individuals with mobility or visual disabilities or spinal cord injury. The sign is made of plastic with a raised international access symbol (a stylized figure in a wheelchair) facing in the direction of a left arrow (model 369L) or right arrow (model 369R) above the word ACCESS. A Grade 2 braille translation is at the bottom. The sign is individually packed in a poly bag, an

Ada Tactile Sign - Exit (Model 368E)

The ADA Tactile Sign - Exit, model 368E, is a braille and tactile access sign designed for use by individuals who use wheelchairs and individuals who are blind or have low vision. This plastic sign has a raised international access symbol (a stylized figure in a wheelchair) above the word EXIT, with a Grade 2 braille translation at the bottom. Signs are individually packed in a poly bag, and are fastened with double-sided pressure sensitive tape. DIMENSIONS (HxW): 8 x 6 x 0.13 inch thick. COLOR:

Ada Tactile Sign - Men/women (Models 365M & 365W)

The ADA Tactile Sign - Men/Women is a braille and tactile bathroom sign designed for use by individuals who are blind or have low vision. Each plastic sign has a raised tactile symbol of a man (model 365M) or woman (model 365W), with the word Men or Women in raised letters and a Grade 2 braille translation. Signs are individually packed in a poly bag, and are fastened with double-sided pressure sensitive tape. DIMENSIONS (HxW): 8 x 6 inches x 0.125 inch thick. COLOR: Brown, black, or blue with w

Ada Tactile Sign - Men/women/restroom (Models 370M, 370U, & 370W)

The ADA Tactile Sign - Men/Women/Restroom is a braille and tactile sign designed for use by individuals who are blind or have low vision. The plastic sign is triangular (model 370M) or circular (models 370U and 370W) with raised symbols and lettering. Model 370M has a stylized male figure above the word MEN; model 370W has a stylized female figure above the word WOMEN; and model 370U has stylized male and female figures separated by a vertical bar above the word RESTROOM, all enclosed in a trian

Ada Tactile Sign - Numbers (Model 366R)

The ADA Tactile Sign - Numbers, model 366R, is a braille and tactile sign designed for use by individuals who are blind or have low vision. The sign is plastic with raised numbering and a Grade 2 braille translation. Signs are individually packed in a poly bag, and are fastened with double-sided pressure-sensitive tape. DIMENSIONS (HxW): 2.5 x 5 x 0.13 inch thick. COLOR: Brown, black, or blue with white numerals.

Ada Tactile Sign - Stairs (Model 366S)

The ADA Tactile Sign - Stairs, model 366S, is a braille and tactile sign designed for use by individuals who are blind or have low vision. The sign is made of plastic with a raised symbol representing a flight of stairs above the word STAIRS. A Grade 2 braille translation is at the bottom of the sign. Signs are individually packed in a poly bag and are fastened with double-sided pressure sensitive tape. DIMENSIONS (HxW): 8 x 6 x 0.13 inch thick. COLOR: Brown, black, or blue with white symbol and

Ada Tactile Sign - Unisex/men/women (Models 368U, 368M, & 368W)

ADA Tactile Sign - Unisex is a braille and tactile bathroom access sign designed for use by wheelchair user and individuals who are blind or have low vision. This plastic sign has a raised international access symbol (a stylized figure in a wheelchair) above the word MEN (model 368M), WOMEN (model 368W), or UNISEX (model 368U), with a Grade 2 braille translation at the bottom. Signs are individually packed in a poly bag, and are fastened with double-sided pressure sensitive tape. DIMENSIONS (HxW

Ada Transfer Shower Stall (Model C4136Bffus)

The ADA Transfer Shower Stall, model C4136BFFUS, is an accessible shower stall designed for use by individuals with mobility disabilities. The enclosure is molded from a single sheet of Lucite cast acrylic with no joints or seams, and with a trench drain system that directs water to the center drain, which is brass with a stainless steel strainer. A fold-up seat allows transfers from wheelchair to shower. Factory installed accessories include one wrap-around grab bar and one straight grab bar mo

Ada Undercounter Refrigerator (Model 6Ada)

The ADA Undercounter Refrigerator, model 6ADA, is a below counter refrigerator designed to be accessible to wheelchair users. This 5.4 cubic foot capacity refrigerator fits under a 34-inch high countertop. It has two easy-pull wire shelves with safety stops to prevent spillage. The top wire shelf has a 6.5-inch flip-up section to allow the user to store tall items underneath. Other features include an automatic interior light and full auto defrost. OPTIONS: Stainless steel door panel. DIMENSIONS

Adaag Pro

ADAAG Pro is ADA compliance evaluation software designed for use in facility audits for compliance with the Americans with Disabilities Act Accessibility Guidelines (ADAAG). The program creates fully customizable accessibility surveys for any type of facility, based on the ADAAG Checklist published by the US Architectural and Transportation Barriers Compliance Board. The program has features that enable easy laptop use for on-site surveys. All controls can be operated without a mouse, and the pr

Adapt Ada Compliance Signage

The Adapt ADA Compliance Signage is a series of access and parking area marker signs designed to help public facilities and private businesses to comply with the requirements of the Americans with Disabilities Act (ADA) for posting information. A variety of signage is available including main directory modules; secondary directory modules; plaque modules; overhead and wall mounts; building codes; and special modules. The signage is offered in Helvetica and Claredon typestyles with accompanying B

Adapta-Bench

The Adapta-Bench is jungle gym equipment that offers exercise features for children with and without disabilities. The wooden bench has metal, tubular bars on it for pull-ups from a seated position and sit-ups, and there is enough room for push-ups. GROUND SPACE: 7 by 3.5 feet. WEIGHT: 307 pounds. WARRANTY: 1-year on materials and workmanship.

Adapted Crib

CUSTOM ADAPTATION PURPOSE: To enable an individual with spinal cord injury to care for her infant as independently as possible. A standard wooden crib with drop sides was adapted. First, extensions were added to the legs to provide clearance for the wheelchair to roll under the crib. The extensions were secured with screws so that thee can be removed if necessary. Next the front drop side was removed and cut in half to provide two center opening gates. After the front corner posts were reinforc

Adapting A Conventional Drop-In Lavatory For Wheelchair Access

DO IT YOURSELF ENTRY --- PURPOSE: To provide access to a bathroom sink for wheelchair users. This illustrated article demonstrates how to modify the cabinet of a conventional lavatory to provide knee room for wheelchair users. Based on guidelines developed by the Center for Universal Design at North Carolina State University. Raising the counter height above the conventional 32 inches by one to two inches, installing the shallowest possible sink with the drain toward the rear of the bowl, and sl

Adaptivation Flexible Switch Set

The Adaptivation Flexible Switch is a bendable, pressure-activated switch designed to help people with limited mobility. Flexible Switches are adhesive-backed, pressure activated switches. These switches are flexible which allows them to be attached to various objects and surfaces, essentially turning those objects into the switch itself. It activates at the slightest touch whether it comes from above of a shallow angle and only requires less than two ounces of pressure. The Flexible Switch is a

Add-A-Ramp System

The Add-a-Ramp System is a modular wheelchair ramp designed for use by individuals with mobility disabilities. The modular ramp sections are molded from automotive-grade fiberglass with molded ribs on the underside for stiffness. Ramps and landings are height adjustable to accommodate site conditions. Step sections have four or five steps. All ramp segments, steps, and landings have a molded, skid-resistant surface. Ramps and landings have a slight crown in the center to prevent water accumulati

Add-On Table

CUSTOM ADAPTATION PURPOSE: To provide a dining table for a young woman with mobility disabilities. The add-on table is made of a 5/8- inch plywood and resembles a card table with only two legs. The front edge of the table is attached and removable from the main dining room table with two sturdy hooks. The height of the table has been lowered to a more comfortable level and a semi-circle has been cut out to fit the young woman’s waist, allowing her to get up close. TITLE: The Add-on Table. WEBSI

Adjustable Blanket Support

The Adjustable Blanket Support is a blanket support designed for use by individuals who cannot bear the weight of blankets on their feet or who have sensitive skin. The support is intended to provide relief from pain and irritation caused by diabetes, bunions or ingrown toenails, neuropathy, fibromyalgia, gout, injuries or surgery, and other foot conditions. Made of lightweight aluminum with a brass finish, this support blanket has a wide base that fits securely between the mattress and box spri

Adjustable Footstool

The Adjustable Footstool is a footstool designed for use by individuals with lower extremity disabilities. Intended to support proper posture and relieve stress on legs, this height-adjustable footstool allows the user to choose his or her desired level of comfort based on height. The frame is made of wood and the foot platform is covered in faux sheepskin. The unit folds when not in use. DIMENSIONS: 14 x 14 x 18 inches. The height can be set at 17 inches, 14.5 inches, or 11.5 inches.

Adjustable Grip Assist (Model 71406)

The Adjustable Grip Assist, model 71406, is a grab bar designed for use to provide balance assistance in the shower or bathtub. This grip has two pivoting handles that swivel to allow positioning for different needs. The grip can be installed and removed by flipping tabs. DIMENSIONS: Handles are 15 inches long.

Adjustable Height Clamp On Tub Rail (Model 70889)

The Adjustable Height Clamp On Tub Rail is a grab bar designed for use in bathtubs. The grab bar is made of powder-coated steel, and is adjustable in both height and width. It has a stainless steel locking mechanism for attaching to the side of a tub, with rubber pads that grip the tub without scratching. DIMENSIONS (HxW): 14 to 17 x 3 to 7 inches. COLOR: White. WARRANTY: Warranted.

Adjustable Rails And Backrest For Toilet

CUSTOM ADAPTATION PURPOSE: To enable individuals with a variety of disabilities to use a toilet. The rails were made from discarded hospital bedheads and mounted to the existing metal wall clamps. The backrest was made from the pad of a telephone table and mounted to a piece of wood connected to two wooden clamps that fit over the rails. A T-nut on either side enables the backrest to slide backward and forward along the rails for adjustment to meet individual needs. A chest strap provides addit

Adjustable Sun Lamp Stand

CUSTOM ADAPTATION PURPOSE: To enable an individual with rheumatoid arthritis to access and position a sun lamp used to treat her arthritis. A stand was made from a wheeled table base with a hole drilled in the center. A piece of metal pipe is inserted in the opening. A holder for the lamp was made from two pieces of plywood bolted together with a gap between them. The metal arms of the lamp's existing base fit into the gap, holding it securely, but allowing it to be removed as needed. The holde

Adjustable Table And Chair For Child

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To provide a custom adaptation of the Rawson Adjustable Chair and Table for a child with spinal muscular atrophy type II. Made to dimensions to suit each individual client, the Rawson provides seating for children who need to maintain an upright and stable posture. The seat, armrest and table height can be adjusted in 25 millimeter increments so the child can have the optimum position for play, eating and learning activities over several years. For e

Adjustable Tilt In Space Chair (Models Ts13-Lb, Ts13-Hb, Ts15-Lb, Ts15-Hb, Ts17-Lb & Ts17-Hb)

The Adjustable Tilt in Space Chair is a youth positioning chair designed for use by children with mobility or neurological disabilities. The chair adjusts to meet the specific needs of each individual as he/she grows, changes, and develops. It features locking casters; adjustable-height footrests; seat cushion with slight anti-thrust wedge; back pad; adjustable hip and trunk guides; and a seat belt. The chair can be adjusted from fully upright to approximately a 40-degree tilt. The footrest, sea

Adjustable Toilet Safety Rail (Model 521-1804-9601)

The Adjustable Toilet Safety Rail, model 521-1804-9601, is a safety frame and grab bar for toilet designed for use by individuals with balance or mobility disabilities. Constructed of anodized, rust resistant aluminum tubing with plastic molded armrests, the frame attaches securely with basic toilet seat hinge bolts, and provides support for the user when lowering to and rising from the toilet seat. DIMENSIONS: The tubing is 1 inch in diameter.

Adjustable Wooden Bed Tray (Model Ha-4801)

The Adjustable Wooden Bed Tray, model HA-4801, is a bed tray designed for use by individuals with mobility disabilities. This table has legs that fold out to allow the tray to be placed across the lap. The tray is adjustable to five different angles for reading, writing, and other activities, and it is laminated to allow easy cleaning. DIMENSIONS: 480 x 340 x 20 millimeters. WEIGHT: 1.5 kilograms.

Adult Safety Swing Chair

The Adult Safety Swing Chair is a swing with torso support designed for use by teens and adults who have good head control but who require extra torso support. This chair-style swing features a one-piece tubular steel frame, a seat and back of nylon belting, and adjustable seat and chest belts with Velcro closure. DIMENSIONS (WxLxH): 19 x 19 x 24 inches. The chest and seat belts are 2 inches wide.

Adult Swing Platform

The Adult Swing Platform is a wheelchair swing designed to enable children and adults who use wheelchairs to swing without leaving the wheelchair. Suitable for children aged seven and above through adult, the swing features a non-skid aluminum platform, an entry ramp with locking chains that keep the ramp in place during entry and exit and pull the ramp up to secure the chair in position, plastic-covered chains, aluminum or galvinized hardware, and continuous aluminum hinges. This swing attaches

Advantage Surface Applied Tactile Warning System

The Advantage Surface Applied Tactile Warning System is a detectable warning surface designed for use by individuals who are blind or have low vision. Made of stainless steel, this tactile warning system has truncated domes that resist snow plow damage during snow and ice removal in cold climates. The surface can be applied to curb ramps, platform edges, and other locations in public rights of way requiring an upgrade to meet ADA (Americans with Disabilities Act) guidelines. DIMENSIONS: 2 x 3 fe

Advantage Tactile Cast In Place Tile

The Advantage Tactile Cast In Place Tile is a detectable warning surface designed for use by individuals who are blind or have low vision. Made of stainless steel, the surface has truncated domes that are resistant to snow plow damage during winter clearing of snow and ice. This replaceable cast in place tile is installed by setting it directly in newly poured concrete, but can be replaced without demolishing the existing concrete. DIMENSIONS: 2 x 3 feet, 2 x 4 feet, or 2 x 5 feet.

Aerodyne Pt 1100

The AeroDyne PT 1100 is an alternating air pressure mattress surface designed to prevent pressure sores for people with lower extremity, mobility, or severe physical disabilities or spinal cord injury. This alternating pressure mattress system delivers pressure relief with 288 cycle changes per day. The pressure monitoring system uses pressure sensors, which monitor the user's movement and adjusts air pressure within the mattress to ensure maximum pressure relief. WARRANTY: One year warranty.

Aerosling Swing

The AeroSling Swing is a net swing designed for vestibular stimulation of children and youth (toddlers through teens). The mesh completely surrounds the swinger in a sitting position or a reclining position with full body support. The swing locks onto an existing swing chain with a stainless steel grip lock. A hardwood bar stabilizes the swinging motion. The swing itself and its carrying case (included) are made of Cordura nylon. All major seams are reinforced. The swing's safety harness is made

Afm-Wm Anti-Fracture Membrane With Waterproofing Material

The AFM-WM Anti-Fracture Membrane with Waterproofing Material is a waterproof membrane designed to provide waterproofing for roll-in showers. This 40-mil sheet membrane utilizes peel-and-stick technology to provide crack suppression and waterproofing underneath thin set tile and stone flooring, including ceramic tile, marble, and stone. This membrane features a two-inch overlap guide on one side for waterproofing in showers, on kitchen floors and decks, and in other indoor and outdoor applicatio

Afwall Ada Retrofit Toilet (Models 2294.011 & 2296.019)

The Afwall ADA Retrofit Toilet is a tall toilet designed to replace existing wall-hung toilets to bring them into compliance with the Americans with Disabilities Act (ADA) without requiring modification of the existing carrier or through-wall water supply. The Afwall toilet mounts on any standard carrier adjusted to set the rim of a conventional toilet at 15 inches above the floor, connects to the standard water supply, and automatically raises the seat height to 17 to 19 inches above the finish

Aid For Closing And Opening Doors From Wheelchairs For Entering And Leaving The Home.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Device to push or pull a door shut from a wheelchair. Aid made of a piece of broom handle or dowel with a crutch tip on one end and a leather loop at the other, which can be hung on a hook by the door. The leather loop hooks around the doorknob to allow the door to be pulled shut without a lot of maneuvering of the wheelchair. SKILLS REQUIRED: Assembly. AUTHOR: Independence Factory TITLE: How to Make it Cheap Manual: Volume 2 REF: Middletown, Ohio: Ind

Air Duct Kitchen Accessories

Air Duct Kitchen Accessories are adjustable kitchen components designed for use by individuals with upper extremity or mobility disabilities.This shelf-mounted unit stores a variety of items with in reach in otherwise unused space. When not in use, the unit retacts into the cabinet.

Aircraft Ada Recessed Hand Dryer (Model B-750)

The Aircraft ADA Recessed Hand Dryer, mode 750, is designed for use by people who have upper extremity disabilities or use of only one hand. It is made of cast iron with white vitreous enamel finish, and its sensor automatically turns the dryer on and off by sensing hand movement. The direction of the air can be adjusted. POWER: Available versions that can be powered by 115 volt or 222 volt power source. WARRANTY: 3 years on motor brushes; 10 years on all other parts.

Airvoter (Model Ac-0300-Av1V2)

The AirVoter, model AC-0300-AV1V2, is a pneumatic (sip and puff) voting machine control designed for use by voters with upper extremity disabilities or amputation, neurological or severe physical disabilities, spinal cord injury, or cerebral palsy. This system allows the user to vote independently on an accessible voting machine through sips or puffs on a disposable mouthpiece in time with visible or headphone-audible cues. After a voter has completed a ballot, the mouthpiece is discarded and th

Ajusta Shower.

Adjustable shower head which can be moved vertically and horizontally by sliding the nozzle on a vertical shaft. Installation can be done easily and may be installed in most showers. Solid brass. Colors available.

Al Len Faucet Gripper

Faucet wrench. One piece construction high impact plastic with lever handle. Fits over 6 dozen standard faucet handles, elliptical sink and toilet values, water meter shut off values and one to seven sided chrome handles.

Alertcast Detectable Warning Tile

The AlertCast Detectable Warning Tile is a detectable warning surface designed to provide tactile warning of danger to pedestrians who are blind or have low vision. Made from glass-reinforced thermoset plastic, it has a top panel molded with truncated domes and bottom docking anchors that are embedded into wet concrete. The anchors lock the unit securely into the concrete without trapping air beneath the surface. The surface is safety-speckled for slip resistance, and the perimeter has a beveled

Alertmat Detectable Warning System

alertmat Detectable Warning System is a detectable warning surface and non slip outdoor matting designed to provide tactile warning of dangers to pedestrians who are blind or have low vision. This surface-applied detectable warning mat is made from 100 percent recycled styrene butadiene from tires mixed with nylon, rayon and polyester fibers. It has truncated domes and can be used for retrofitting or new installations. It is slip-resistant and has a thin surface profile and perimeter beveled edg

Alerttile Detectable Warning

AlertTile Detectable Warning is a detectable warning surface designed for use to provide tactile warning of dangers ahead for pedestrians who are blind or have low vision. Applications include curb ramps and platform edges. Made from a glass reinforced thermoset composite, its semi-rigid composition is flexible enough to conform to ramp irregularities in retrofit applications. The surface has an in-line pattern of truncated domes to provide tactile warnings. The surface is safety-speckled for ad

All Deck Coating System

The ALL DECK Coating System is a non-slip floor covering system for indoor or outdoor use on walkways, decks, and ramps; parks and recreation areas; stairways and elevators; pool decks and athletic courts; and more. The material is a specially formulated fiberglass-reinforced, fire-resistant, waterproof, textured substance that may be used on old and new concrete, new and weathered plywood, steel, exposed aggregate in concrete or epoxy matrix, asphalt bitumen, masonry, magnesite/diato, or previo

All Purpose Voting Booth (Model Vb-Dapb)

The All Purpose Voting Booth, model VB-DAPB, is an accessible voting booth that can be used for voters with lower extremity or mobility disabilities or spinal cord injury. The adjustable height booth can be used by voters who are standing or seated. The writing surface can be raised for standing voters or lowered for sitting voters, including those seated in a wheelchair. The booth is collapsible for storage. It has aluminum legs and comes with a curtain for privacy. OPTIONS: Replacement curtain

All Terrain Walkaroos

These All Terrain Walkeroos are designed for individuals who use walkers to get around. The Walkaroos are supportive tips for walkers. They glide and move smoothly across carpet and floors while offering stability. Easy to install: remove old cap, put Walkaroo on and twist in place to secure. Comes in sets of 2. Designed not to catch on or mark flooring. Made of high density polyethylene. Non-porous material decreases chance of spreading harmful germs. Comes in a set of 2.

Allexton Rigid Blanket Cradle (Model 138)

The Allexton Rigid Blanket Cradle, model 138, is a blanket support designed for use by individuals at risk for pressure sores/ulcers. Constructed from plastic coated steel tubing, this device is a continuous closed loop, with one end of the loop being placed between the mattress and bed base. The weight of the bed clothes is supported, keeping them clear of the patient for ventilation and pressure relief. DIMENSIONS (WxHxL): 11 x 19.5 x 17.25 inches. COLOR: White.

Alternate Entrance (With Handicap Access Symbol And Arrow) Suction Cup Sign (Model 2072)

The Alternate Entrance (with Handicap Access Symbol & Arrow) Suction Cup Sign, model 2072, is a bilingual (English-Spanish) access sign designed for use to indicate a wheelchair access route for individuals with mobility disabilities or spinal cord injury. The sign has the words "Alternate Entrance" and "Entrance Alternitiva" under circles containing a right arrow and the International Access Symbol, a stylized drawing of a figure seated in a wheelchair. The sign comes with 3 suction cups i

Alternate Entrance With Symbol And Arrow Sign (Model 2014)

The Alternate Entrance with Symbol & Arrow Sign, model 2014, is a bilingual (English-Spanish) access ssign designed to indicate a wheelchair accessible entrance for individuals with mobility disabilities or spinal cord injury. The sign has the words "Alternate Entrance" (in English) and "Entrada Alternativa" (in Spanish) below two circles. The circle on the left contains the International Access Symbol, a stylized drawing of a figure seated in a wheelchair, and the circle on the right contai

Alternative Door Opener (Ado)

DO IT YOURSELF ENTRY PURPOSE: To assist individuals with upper extremity and mobility disabilities in activating a large-button powered door operator. Resembling a baton, this device is made from a wooden cylinder with a section cut from a bicycle handlebar grip covering the end used to push the activator button. The ADO is attached to the side of the door operator pad/button using Velcro. DIMENSIONS: 12 inches long x 0.75 inch in diameter. SKILLS REQUIRED: Basic shop skills with a table saw.

Alumilite Folding Curb Ramp

The Alumilite Folding Curb Ramp is a portable ramp designed to provide access over curbs or steps or in and out of vans for wheelchair users. The ramp folds in half for carrying and comes with a handle and closing strap. The ramp is made of welded aluminum with a permanent non-skid surface that is integral to the aluminum and cannot tear or wear off. DIMENSIONS (LxW): 3, 4, 5, or 6 feet x 29 or 36 inches (open) and 15 or 18 inches (closed). WEIGHT: 18 to 41 pounds depending on size. CAPACITY: 60

Alumilite Solid Curb Ramp

The Alumilite Solid Curb Ramp is a curb ramp designed to provide access over curbs or steps for wheelchair users. The ramp features welded aluminum construction with a permanent non-skid surface that is integral to the aluminum and cannot tear or wear off. The ramp can be used as a short fixed ramp or for temporary purposes. DIMENSIONS (LxW): 3, 4, 5, or 6 feet x 30 or 36 inches. WEIGHT: 18 to 41 pounds depending on size. CAPACITY: 600 pounds.

Aluminium Threshold Ramp

The Aluminum Threshold Ramp is a threshold ramp designed for use by individuals who use wheelchairs or scooters. The ramp is manufactured of anodized aluminum and trimmed at the edges with a coarse finish strip to prevent the risk of slippage. The treads are slotted to facilitate drainage and stop the build up of ice. It is also transportable in the back of a car. DIMENSIONS: 2 or 3 feet long.

Aluminum Doorstep Ramp

The Aluminum Doorstep Ramp is a one-step, curb-type entry platform for persons with physical disabilities requiring assistance in negotiating walkers and wheelchairs to and from curbs or buildings. The all-aluminum ramp requires no new construction and is completely rust-proof and slip-proof. It can be used as either a permanent or temporary solution to ramping needs. DIMENSIONS: Ramps are available in widths of 30, 36, 48, 60 and 72 inches. Ramp height is available from 3.5 to 8 inches, and len

Aluminum Modular Ramp

The Aluminum Modular Ramp is a portable modular ramp designed for use by individuals with mobility disabilities. This all-aluminum ramp system provides wheelchair access to homes or businesses. The system can be assembled with little or no site preparation, and the modular components can be reconfigured or disassembled and moved to a new location. Components include straight ramps, 45 degree turns, 90 degree turns, and 180 degree switchbacks . DIMENSIONS: The ramps are 36 inches wide. All modul

Aluminum Portable Wheelchair Ramp

The Aluminum Portable Wheelchair Ramp is a folding aluminum ramp designed for use by individuals with mobility disabilities or spinal cord injury. The ramp has a non-slip, raised button surface for traction and safety. It folds in the center and has a handle for carrying. OPTIONS: Wheel kit for rolling transport and removable hinge pins allowing the ramp to separate into two sections. DIMENSIONS: Ramps are available in 5, 6, 7, 8, 10, or 12 feet lengths. All ramps are 30 inches wide. Custom dime

Aluminum Sectional Wheelchair Ramp System

The Aluminum Sectional Wheelchair Ramp System is a modular ramp designed to provide building access for wheelchair users. Sections are made from heavy-duty aluminum with a raised-button non-slip surface, and can be assembled into semi-permanent wheelchair access ramps. Because ections are interchangeable, the system can be expanded or reconfigured when needed. Ramps come standard with double bar rails made from galvanized steel with aluminum mounting brackets. OPTIONS: Handrail retro-fit kits fo

Aluminum Threshold Ramp

The Aluminum Threshold Ramp is a threshold RAMP designed to make doorways accessible to individuals who use wheelchairs or scooters. This aluminum ramp has an anti-slip, high traction sandpaper surface. The ramp has mounting holes in its top corners and comes with hardware to secure it to the doorway surface. DIMENSIONS (LxW): 8, 10, 12, 16 or 24 x 32 inches or 16 or 24 x 36 inches. The rise is 0.25 to 0.5, 0.5 to 0.75, 0.75 to 1, 1.5 to 2, or 1.5 to 3 inches depending on length. WEIGHT: 3 to 15

Ambidextrous Lever Handle Lock (Model 7055)

The Ambidextrous Lever Handle, model 7055, is a keyless exterior door lock with lever designed for use by individuals with fine motor, grasping, or upper extremity disabilities. This heavy-duty door lock has an eight-button combination pad with an ambidextrous lever for right- or left-hand doors. The lock has double push capability, meaning a repeated digit can be used in the combination. To preserve the lock's mechanical functions, its inner parts are Teflon-coated. A hold-back feature allows t

American Access Modular Aluminum Wheelchair Ramp

The American Access Modular Aluminum Wheelchair Ramp is a modular ramp designed for use by individuals with mobility disabilities or spinal cord injury. Ramps come in four different lengths and two different widths. Platforms come in three sizes. Each ramp section comes with a pair of aluminum handrails. The top rails is round while the intermediate rail is rectangular. The handrails slide over the legs that support the ramp virtually disguising the legs from view and keeping the ramp system str

American Bidet Sitzbath Appliance

The American Bidet Sitzbath Appliance is a colonic treatment toilet seat with warm water for washing and warm air for drying. It is available with hand or food operated remote control, and easily attaches to any toilet in home or apartment. It is portable and removable; no special plumbing work necessary. The seat and lid also are removeable for cleaning.

American Ramp System Amramp Modular Steel Wheelchair Ramp

The American Ramp System AmRamp Modular Steel Wheelchair Ramp is a modular ramp designed for use by individuals who use wheelchairs or scooters or who cannot use stairs. The steel mesh design of the ramp allows for rain and snow to pass through, minimizing slippery conditions. Ramps are available for permanent and temporary applications, and may be installed the next day after purchase or rental. Ramps are available with or without handrails on both sides. OPTIONS: Turning landings. DIMENSIONS:

Americans With Disabilities Act Program (Model 94179)

The Americans with Disabilities Act Program, model 94179, is an ADA reference with in-depth information regarding the Americans with Disabilities Act and how to ensure compliance. The kit contains a 185-page Program Binder in easy-to-understand format to help the user to determine appropriate definitions of disability, undue hardship and reasonable accomodations; a thorough overview of the Americans with Disabilities Act; required reproducible forms; and a list of federal agency resources.

Ameriglide Battery Powered Stair Lift

The AmeriGlide Battery Powered Stair Lift is an interior stair lift designed for use by individuals with arthritis or mobility, lower extremity, or walking disabilities. The padded seat has vinyl upholstery, a movable footrest, and a curved backrest, and it swivels 180 degrees to allow the user to get on and off at top and bottom landings. The lift moves on nylon wheels. It has 24-volt Class 2 grounded controls and can be installed in left or right side orientation. Safety features includes sens

Ameriglide Electric Powered Stairlift

The Ameriglide Electric Powered Stairlift is an interior stair lift designed for use by individuals with mobility or lower extremity disabilities or arthritis. The lift has a movable footrest, a curved backrest, and a padded seat. The seat swivels 180 degrees to facilitate getting on and off at top and bottom landings. When seated, the user pushes a control button and the seat rides smoothly on nylon wheels. The lift has 24-volt Class 2 grounded controls throughout. Safety features include footr

Ameriglide Elite Residential Elevator

The AmeriGlide Elite Residential Elevator is a home elevator designed for use by wheelchair users or individuals with mobility or lower extremity disabilities or arthritis. The elevator can be installed in a multi-level home or public or commercial building that serves disabled or elderly individuals, such as a school, church, apartment complex, or senior citizen center. It has a rigid guide rail system; a traction sheave drive system with counterweights for energy-efficient operation; self-clos

Ameriglide Express Dumbwaiter

The AmeriGlide Express Dumbwaiter is a dumb waiter designed for use by individuals with mobility disabilities. This dumb waiter can be used to move goods and supplies in a multi-storied home. It carries up to 100 pounds, and moves up to 28 feet at a speed of 20 feet per minute while allowing for two to four stops along the way. The dumb waiter comes pre-assembled with a 1/3-horsepower 90 volts direct current (DC) motor with two automatic, low-voltage (24-volt) control switches. The unit has powd

Ameriglide Heavy Duty Stair Lift

The AmeriGlide Heavy Duty Stair Lift is an interior seat lift designed for use by individuals with balance, lower extremity, or mobility disabilities or arthritis. This stair lift has a large, contoured seat with ajustable armrests and footrests, a contoured high-backed backrest, a padded seat, and vinyl upholstery. The lift runs smoothly on nylon wheels with a half-horsepower 90-volt direct current (DC) motor. It fits on staircases 36 inches or wider, and can be oriented to the right or left. T

Angel Faucet

---- PROTOTYPE --------- PURPOSE: To design a prototype of a hand washing device for individuals who are one handed or had an arm amputated. The Angel Faucet is an electronic faucet with a scrubbing pad designed for use by individuals who have use of only one hand or arm. The sensor-activated tap has a scrubbing pad mounted on top of the spigot that allows the user to scrub and clean the single hand effectively. The pad is made of soft silicon, and it can be removed for cleaning. The flow of wat

Angle-Frame Two Position Tilt Mirror (Model B-294)

The Angle-Frame Two Position Tilt Mirror, model B-294, is a tilting mirror designed to provide easy visibility for persons in wheelchairs. This mirror has a type 304 stainless steel frame with satin finish, a float/plate glass mirror and a self-locking mechanism. The top of the mirror extends 7 inches from wall and the bottom of the mirror mounts on the wall with a full-length stainless steel hinge. DIMENSIONS (HxW): 30 x 16 inches. WARRANTY: 15 year warranty.

Anodized Aluminum Grab Bar (Models 6128, 6070, & 6129)

The Anodized Aluminum Grab Bar is a wall-mounted grab bar designed for individuals who need some assistance in maintaining their balance in a given setting. DIMENSIONS: 1 inch in diameter; extends 2 1/2 inches from the wall; length is 12 inches between mounting holes (6128); 18 inches between mounting holes (6070); or 24 inches between mounting holes (6129).

Anti-Snore Pillow

The Anti-Snore Pillow is an anti-snoring pillow designed for use by individuals with respiratory disabilities. Intended to position the head and neck to keep air passages open, this pillow has a built-in air chamber in the center that allows adjustable support to keep the user off his or her back while sleeping. The air chamber can be inflated to the desired height with a connected tube. The curved pillow is made of natural latex foam flocks that regulate moisture and warmth. The Euro soft cotto

Apollo Advantage Seated Bathing System (Models 6000 & 6300)

The Apollo Advantage Seated Bathing System is a whirlpool bathtub designed for use by caregivers in bathing individuals with mobility or severe physical disabilities. The system includes a bathing cabinet with a front door. Bathers enter the tub in a comfortable,secure chair and are bathed while seated. The chair is designed to move easily to allow the caregiver access to all areas of the body. Four whirlpool jets provide a gentle, massaging motion while a thermometer monitors water temperature.

Apollo Square Picnic Table - Wheelchair Accessible (Models T46Eb-3Sm & T46Eb-3S)

The Apollo Square Picnic Table - Wheelchair Accessible is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This square table is made of plastic-coated steel, with seats on three sides and space for a wheelchair on one side. The table has an umbrella hole in the center and is available in portable/surface mount (model T46EB-3SM) or inground frame (model T46EB-3S) models. OPTIONS: Aluminum mounting plates to hide mounting brackets and hard

Apollo Wheelchair Accessible Picnic Table (Models T9Ebrdcppsm & T9Ebhdcps)

The Apollo Wheelchair Accessible Picnic Table is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This rectangular picnic table has a single long table top with one long bench on one side and two shorter benches on the other, with space for a wheelchair between the two shorter benches. There is an umbrella hole in the center of the table top. The table is made of plastic-coated steel and is available with either a portable/surface mount

App Pump And Pad (Models P1210 & 1212)

The APP Pump And Pad is an alternating air pressure mattress surface with pump designed for use by individuals at risk for decubitis ulcers/pressure sores. The pad is available with either a fixed pump (model P1210) or an adjustable pump (model P1212). WEIGHT: 15 pounds. COLOR: Beige.

Approach For The Cabinet

The Approach for Cabinets are motorized adjustable kitchen components designed for individuals who use wheelchairs or who cannot reach standard cupboards. This motorized wall cabinet adjustment system uses a powered push button system to raise and lower kitchen cabinets (cabinetry not included) through a 20-inch height adjustment range. DIMENSIONS: Fits W3030 to W4830. WARRANTY: Two years.

Approach For The Sink & Approach For The Cooktop

Approachfor the Sink and Approach for the Cooktop (sold separately) are accessible and adjustable kitchen components designed for use by individuals who use wheelchairs. These motorized counter systems enable push-button height adjustment of kitchen sinks and cooktops. A flexible drain line is required and available for the sink system. INSTALLATION: Can be installed into a 36 to 48-inch wide cutout by any experienced contractor. DIMENSIONS: The height adjusts from 28 to 36 inches. WARRANTY: Two

Aps-10

The APS-10 is an audible pedestrian signal designed to aid pedestrians who are blind or have low vision in crossing streets safely. When connected to existing pedestrian signals, it produces separate and distinctive electronic bird chirping sounds for both north/south and east/west crossings. It has a universal mount and is easily installed on any existing pedestrian signal. The sound output of this audible pedestrian signal is 90 decibels (Db) at one meter, with sound output automatically switc

Aqua Pt

The AQUA PT is a heat therapy system specifically designed for use in medical and rehabilitation facilities to help increase circulation and range of motion in addition to reducing muscle spasms, pain and stress. Designed as a non-invasive self-contained unit, it is intended to provide to the major benefits of hydrotherapy, dry heat therapy and accupressure/percussion therapy in a reduced time format (10-20 minutes per session). When operating the unit, the user remains clothed and dry inside a

Aqua Ramp

The Aqua Ramp is a portable swimming pool ramp designed to provide swimming pool access for wheelchair users and others who have difficulty using a ladder or steps. This lightweight aluminum ramp has non-skid surfaces, and it is wide enough for most aquatic wheelchairs. It automatically adjusts with movable floor systems. The ramp includes a lower platform. DIMENSIONS (LxW): 12 x 3 feet; lower platform is 3 feet long. WEIGHT: 250 pounds. WARRANTY: 5 year structural warranty.

Aqua Saver Extended Height Ada Compliant Two Piece Gravity Fed Toilet (Model 21-717)

The Aqua Saver Extended Height ADA Compliant Two Piece Gravity Fed Toilet, model 21-717, is a tall toilet designed for use by individuals with mobility disabilities. This toilet has a high, elongated seat to support wheelchair transfers and to make sitting and rising easier for users with lower extremity disabilities or arthritis. Other features include low water consumption of 1.6 gallons per flush (gpf), siphon-jet flushing action, and a glazed trapway. DIMENSIONS (HxDxW): 31 x 27.5 x 20.25 in

Architectural Signage.

Access signs. Tactile etching raised image characters, braille logos, symbols and signs. Acrylic precision cut letters and numbers 1/8 to 1/4 inch thick, standard height 1 1/4 inches. International symbols can be custom made. Formats: Directories, acrylic plaques, overhead, right angle, modular frame, changeable frame, changeable message units, health care units, fire safety, administrative, elevator cues.

Area Of Rescue Signs

Area of Rescue Signs are designed for buildings and facilities to identify accessible areas of rescue assistance for persons with disabilities in emergency situations. The message "Area of Rescue Assistance" is coupled with the international access symbol, left, right, and bidirectional arrows. Model ARS4 carries the message "NOT an area of rescue assistance exit". MOUNTING: All signs have pressure-sensitive adhesive backings. DIMENSIONS: 14 x 10 inches. COLOR: Red lettering and arrows, blue and

Arjo Century Bathing Systems

Height adjustable and fixed height bathing systems, portable free standing units with caster bases. Single attendant battery powered or hydraulic lift hygiene chair. Height adjustable for transport. Security straps. Hydraulically height adjustable lift bath trolley for recumbent patients. Wheel guide for maneuvering ease. Safety straps for chest and hips. Back support adjustable to three positions. Gel coated fiberglass tub, optional stainless steel. Stainless steel control panel. 1900 mm tub av

Arm Support Aid Rail (Model 3033)

The Arm Support Aid Rail ##3033 is a stainless steel wall to floor grab bar for use next to a toilet. The support consists of an L-shaped bar with an extension arm that gives added stability to the vertical bar. This grab bar is available in 4 concealed or 4 exposed mountings, and in right or left hand configurations. DIMENSIONS: 30 (L) x 33 (H) inches with 5 (L) x 12 (H) inch extension arm. FINISH: Brushed Satin is standard; optional finishes include non-slip grips, metallic plating, and electr

Arm Support Rail

Stainless steel grab bar from wall to floor. 1, 1 1/4 or 1 1/2 inch diameter. Satin finish. Exposed or concealed mount. 30 by 30 inches.

Armada Modular Ramp System

The Armada Modular Ramp System is a modular ramp designed to provide access for wheelchairs and scooters. The system includes ramps, platforms, support legs, and handrails. The system's universal platform design allows for virtually any configuration. Curbs and handrails can be positioned on any side. Components are made from anodized aluminum with heavy-duty welded construction. The bi-directional knurled tread forms a rugged skid-resistant surface that cannot wear off or peel. Height and slope

Armor-Tile Tactile Systems

Armor-Tile Tactile Systems are detectable warning surfaces designed for use by individuals with low vision or who are blind. Designed to mark curb ramps and pedestrian walkways, these tiles can be used for casting into wet concrete or for surface applcation in retrofitting or new construction. The complete system includes tile, adhesive, fasteners, and sealant. The tile has a textured surface and beveled edges and can be cut to conform to angled and radius ramps. DIMENSIONS: Available in 12 x

Arnco 2000 Line

Custom bend railing system made of aluminum pipe. 1 1/2 inches diameter. Sections available up to 16 feet long, 2 1/4 inches wall clearance. Meet and exceed OSHA requirements.

Arrow Q Series Lever Lockset

The Arrow Q Series Lever Lockset is an exterior door lock with lever handle designed for use by individuals with grasping or upper extremity disabilities. Levers are pressure-cast zinc with a brass or bronze rose, and are non-handed to operate bi-directionally. The lockset is through-bolted, requiring a door from 1.75 to 2 inches thick with a 2.13 inch diameter bore through the door. An extra long bearing sleeve offers added support for interlocking tubes and provides extra lever rigidity. The l

Arrow W Series Lever Lockset

The Arrow W Series Lever Lockset is an exterior door lock with lever handle designed for use by individuals with grasping, fine motor, or upper extremity disabilities. The non-handed lever comes in Broadway, Sierra, or Ventura styles, and is set in a circular plate (rose) assembly. The lockset includes a solid brass, six-pin cylinder with Arrow “A” keyway; a brass latch with brass, bronze, or stainless steel latch front; thru-bolts with support plates; and two six-pin nickel silver keys. DIMENSI

Arthritis Daily Helper Kit (Model 557183)

The Arthritis Daily Helper Kit, model 557183), combine products designed for use by individuals with arthritis, fine motor or grasping disabilities or limited hand dexterity. Intended to assist arthritis sufferers with daily tasks, this kit features the following item: Dr. Grip Pen, Rubber Doorknob Extension, EZ Key Turner, Button Hook with Zipper Pull, and Shoe Buttons (see separate entries).

Ascension Protege Low-Rise Portable Wheelchair Lift (Model 5442P)

The Ascension Protege Low-Rise Portable Wheelchair Lift, model 5442P, is a mobile interior wheelchair lift designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This unit provides access to stages, platforms, risers, and other elevation changes up to 42 inches high. It has a steel frame and a sheet metal platform with an aluminum alloy underpan. The unit is fully portable and can be moved by one person for event setup. DIMENSIONS: Platform (LxW) 54

Ascension Virtuoso (Model 5460F)

The Ascension Virtuoso, model 5460F, is an interior wheelchair lift designed for use by individuals with spinal cord injury or lower extremity or mobility disabilities and others who use wheelchairs. This lift does not require a tower as part of its construction, nor does it have an access ramp so that a person can enter it directly from street level. The lift consists of a drive system, the passenger platform, and doors or gates. The platform is enclosed on four sides by transparent thermoplas

Ascension Virtuoso (Models 4860P And 5460P)

The Ascension Virtuoso are portable wheelchair lifts designed for use by individuals with spinal cord injury or lower extremity or mobility disabilities and others who use wheelchairs. These lifts do not have an access ramp so that a person can enter it directly from street level. The lifts consist of a drive system, passenger platform and doors or gates, all mounted on casters for portability. The casters lock, and the lift will not operate when they are not locked. The platform is enclosed on

Ascent Dumbwaiter

The Ascent Dumbwaiter is a dumb waiter designed for use by individuals with mobility or physical disabilities. It comes with the entire drive system pre-installed on the underside of the car, and the car chassis/trolley system pre-installed on a section of the track. Installation requires connecting sections of track, securing the drive cable to the header, and routing the wires to the control buttons and door interlocks. WARRANTY: 2-year warranty on parts and a 5-year drive train.

Ashby Bath Shortener (Model 6290)

The Ashby Bath Shortener, model 6290, is a bathtub shortener desinged for use by individuals with short stature. This unit fits inside the tub to shorten its length and is designed to prevent shorter users from slipping down the bathtub and possibly under the water. The unit attaches with rubber suction cups to the foot of the bath. DIMENSIONS: 370 x 280 x 300 millimeters. CAPACITY: 190 kilograms.

Asko Ada Height Compliant Dishwasher (Model D3112)

The ADA (American wth Disabilities Act) Height-Compliant Dishwasher, model D3112, is an under counter dishwasher designed for use by individuals who use wheelchaiirs. The unit has a front control panel, a balanced door, and operates at 49 decibels. It has upper and lower racks with adjustable tines in the lower rack and two adjustable stemware shelves, and can hold up to 12 place settings. It can be programmed for heavy wash, normal wash, quick wash, or rinse & hold, with 5 temperatures up t

Asko Ada Height Compliant Dishwasher (Models D3251Fi & D3251Hdss)

The ASKO ADA (American with Disabilities Act) Height-Compliant Dishwasher is a dishwasher designed for use by individuals who use wheelchairs. The dishwasher height is variable. Controls are hidden behind the door. Handle styles include towel bar, curved, or sense handles. The dishwasher can be programmed for six wash settings (Auto Wash, Heavy Wash, Normal Wash, Delicate Wash, Quick Wash, or Rinse & Hold) and for six temperatures up to 160 degrees Fahrenheit, or the right settings for washi

Assist Suction Tub Bar

The Assist Suction Tub Bar is a bathtub grab bar designed for use by individuals with balance or lower extremity disabilities. This grab bar attaches to the bathtub edge or shower wall with two suction cups, which are locked in place by lowering a switch located on the grab bar. Flipping the switch up releases the cups so the grab bar can be removed or repositioned. The grab bar is made of ABS plastic and rubber. DIMENSIONS: 11 inches long with suction cups 3.75 inches in diameter or 16 inches l

Assist-A-Tray

The Assist-A-Tray is a transfer aid and a swiveling tray for an armchair or sofa designed for use by individuals with balance or mobility disabilities. The unit features a sturdy, ergonomically designed handle for assistance when getting in or out of a sitting position and a multi-use swivel tray with cup holder and utensil compartment. The unit can be used on the right or left side of a chair or couch and the base slides underneath the furniture. The base has four feet with rubber pads to ensur

Assistive Tub Bar

The Assistive Tub Bar is a bathtub or shower grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. To install, the bar is positioned vertically, horizontally, or diagonally on the tub or shower wall, then tabs on the bar are flipped down to engage dual suction cups. Releasing the flip-tabs allows the bar to be removed. The bar is made from ABS plastic and rubber. DIMENSIONS (LxW): 16 x 3.5 inches. CAPACITY: 300 pounds.

Astro-Swing (Models 2511, 2553, 9331, 9342, & 9553)

The Astro-Swing, models 2511, 2553, 9331, 9342, and 9553, is a powered door operator that can be used on side hung or center pivot doors, in new or existing installations, inside or outside. Opening time is 3 to 5 seconds, and can be adjusted up to 30 seconds. Doors open to a 90-degree angle, closing with spring action, and exerting less than 15 pounds of pressure. For safety, the door will stop if obstructed. Models include concealed overhead mount, single door (2511); concealed overhead mount

Atm Permanent Symbol - Disabled Access

The ATM Permanent Symbol - Disabled Access is a parking area and access route marker for use with roadways, garages, or parking lots. This permanent marker is made using the manufacturer's 300 or 400 series durable tape. The symbol maintains a secure, permanent bond in high-traffic areas in hot and cold climates. This high-impact marker can be applied to asphaltic or concrete surfaces in virtually any outdoor space or parking lot. The marker is pre-cut and has a pre-applied, pressure-sensitive a

Attache & Credenza Lamp Dimmers

The Attache & Credenza Lamp Dimmers are designed for use by persons with physical disabilities. The dimmers are designed for use with table, floor and swag lamps and help to eliminate the need for three-way light bulbs. They offer the user the choice of adjusting the lamp brightness to any level preferred. The controls have a built-in night light so they can be found in the dark. The Attache model is constructed to attach to a lamp cord plugged in to a wall; the Credenza model is designed to

Attends Night Preserver Underpad

The Attends Night Preserver Underpad is an incontinence pads and bed underpad for use by individuals with urinary incontinence. They are intended to protect beds, chairs, and other surfaces. These pads are intended for overnight use. They feature an additional super absorbent polymer and cellulose fibers for heavy absorbency. DIMENSIONS (WxL): 23 x 36 inches; 30 x 30 inches; 30 x 36 inches.

Audiam Os & Audiam Fs

Audiam OS and Audiam FS are audible pedestrian signals designed for use by pedestrians who are blind or have low vision. Audiam OS is an audible signal designed to help pedestrians who are blind or who have low vision to locate the traffic signal request box. It gives off a ticking sound, which can be heard five meters from the traffic signal mast. The Audiam FS provides an acoustic signal to indicate when the green (go) signal is on, and to guide pedestrians who are blind or who have low visio

Auto-Equalizer (Models 2610, 4810, 4820, & 4840)

The Auto-Equalizer, models 2610, 4810, 4820, and 4840, is a powered door operator designed to make doors accessible to individuals with physical or mobility disabilities. This heavy duty, low energy pneumatic automatic door operator can be used on new or existing doorways. It opens interior or exterior doors automatically to 90 degrees when actuated, and holds the door open up to 30 seconds. Unit mounting options include a frame (2610), hinge side mount (4810), top jamb mount (4820), or parallel

Automark

The AutoMARK is a voice output and switch adapted voting machine designed for use by individuals who are blind or have low vision or upper extremity disabilities. This touchscreen electronic voting machines has adjustable on-screen font sizes for voters with low vision, voice output for voters who are blind, and a sip/puff tube for voters unable to use the touch screen or buttons. The unit also has multiple language capability and supports write-in candidates, and can be used in combination with

Automatic Balanced Door Operator

The Automatic Balanced Door Operator is a powered door closer designed for installation on existing balanced doors. The device operates by means of a motion detector or a push button.

Automatic Entrance Systems

Electric automatic door opener. Available for swinging doors, sliding doors, or conversion units for existing doors. Modular, self contained electromechanical operators fit into door header. Electronic control unit regulates operating mechanism. Sealed mechanical gear drive system with spring and safety clutch for door closing. Built in emergency reverse swing feature. Low noise level. Operates indoors or outdoors in temperatures -30 to 160 degrees Fahrenheit. All models activated by carpet swit

Automatic Faucet Control

The Automatic Faucet Control is a water flow control designed for use by individuals with memory or cognitive disabilities or upper extremity disabilities. This device prevents the water from being left on and provides access for those unable to turn a tap. The device replaces the aerator on existing faucets and turns the water on when the hanging wand is nudged. When the slight pressure is removed, the water automatically turns off.

Autopantry, The

The AutoPantry™ is a motorized, electric kitchen storage system designed for use by individuals with upper extremity, mobility, or neurological disabilities or spinal cord injury. It has 2 columns of shelves, one behind the other, and operates as a vertical carousel, bringing shelves up, down and around so that items are within reach. The AutoPantry™ can also bring items from the back of the pantry to the front for easier access.

Avc Advantage

AVC Advantage is a voice output voting machine designed for use by individuals who are blind or have low vision. This electronic voting system has a full ballot display with audio voting and smart card activation. A large candidate area on the ballot display accommodates large type. A tactile voting switch and visual indicator confirm that a voting selection has been made. The voting machine is wheelchair accessible. The machine supports up to 2,000 ballot styles with 504 ballot positions. POWER

Avc Edge

AVC Edge is a voice output voting machine designed for use by voters who are blind or have low vision. Its audio ballot capability helps voters with vision disabilities cast a secret ballot. It has a large high resolution color screen which is adjustable to serve voters of varying heights and physical abilities. The machine accommodates bilingual and multilingual ballots with up to 12 languages in up to 2,000 ballot styles, with a maximum ballot size of 500 pages with 1,000 contests/races/propos

Aviary Crib

The Avery Crib is a circle bed designed for use with infants with cognitive or severe physical disabilities. Designed to promote infant safety and provide an unrestricted view for the developing child, this hand forged iron crib offers easier child access to parents and eliminates the dangers of sharp corners found on standard cribs. The crib has doble drop-side access and a canopy assembly and includes a high-density foam mattress. OPTIONS: Bedding and linens watterproof pad, and mattress pad.

Awning Aid

CUSTOM ADAPTATION PURPOSE: To provide a means for an individual with limited strength to raise and lower awnings on the windows of a home. The western windows of the home were fitted with two-meter wide canvas awnings with steel fittings. The block-and-tackle system for raising and lowering the awnings was created using three-strand nylon anchor rope and stainless steel pulleys, all purchased from a boat shop. The lower pulley is fastened securely to an eyelet mounted on the brick wall of the h

Babeebrite

Babeebrite is a hands-free battery-operated light source deigned for use by individuals with upper extremity or vision disabilities. This light clips onto any surface up to one-inch thick, including shirt pockets, robes, bed headboards, and other surfaces, to provide soft, unobtrusive light. The unit features an automatic shut-off seven minute timer to help preserve the battery life. POWER: Uses two CR-2032 batteries (included).

Babeetenda Converting Crib

The BabeeTenda Converting Crib is designed to convert from a Baby Crib to a Toddler Crib to a Youth Bed and finally to a Junior Bed. It is made of hardwood on a steel frame with end panels covered in mar-proof laminate. There are plastic teething rails all the way around and the bed is mounted on 2-inch casters for mobility. The mattress is made of firm high-density non-allergenic foam. The sides have hardwood slats, glued and pinned with steel 2 3/8 inches apart. Both sides can be lowered by re

Balanced Spectrum Beale Street Floor Lamp

The Balanced Spectrum Beale Street Floor Lamp is a low vision light designed for use by individuals with vision disabilities. This lamp simulates the spectrum of natural daylight to aid visibility. The 26-watt bulb included with this lamp is brighter than a 100-watt incandescent bulb. The lamp is equipped with an adjustable, counter-balanced arm for optimal positioning. OPTIONS: Replacement bulbs. DIMENSIONS (LxWxH): 21.8 x 10.8 x 62.6 inches. WEIGHT: 15 pounds. COLOR: Brushed nickel with a che

Balanced Spectrum Beale Street Table Lamp

The Balanced Spectrum Beale Street Table Lamp is a low vision light designed for use by individuals with vision disabilities. This lamp simulates the spectrum of natural daylight to aid visibility. This table lamp's 26-watt bulb is brighter than a 100-watt incandescent bulb. The lamp is equipped with an adjustable, counter-balanced arm for optimal positioning. OPTIONS: Replacement bulbs. DIMENSIONS (LxWxH): 19.1 x 10 x 29 inches. WEIGHT: 8.5 pounds. COLOR: Brushed nickel with a cherry wood pole

Balanced Spectrum Desk Lamp

The Balanced Spectrum Desk Lamp is a low vision light designed for use by individuals with vision disabilities. This desk lamp simulates the spectrum of natural daylight to aid visibility. The lamp is equipped with a flexible gooseneck for optimal positioning. The unit uses an energy-efficient 8,000 hour, compact 27-watt bulb to produce the equivalent lighting of a 150-watt standard bulb. The on/off rocker switch is located under the head of the lamp. DIMENSIONS (LxW): The base is 9.5 x 7.5 inch

Balanced Spectrum Elegance Floor Lamp

The Balanced Spectrum Elegance Floor Lamp is a low vision light designed for use by individuals with vision disabilities. This lamp simulates the spectrum of natural daylight to aid visibility. The lamp is equipped with a flexible gooseneck for optimal positioning. The unit uses an energy-efficient 8,000 hour compact bulb. OPTIONS: Replacement bulbs. DIMENSIONS: 50 inches tall with a seven-foot power cord. The head is 5.5 x 10.5 x 1.5 inches. The base is 10.75 x 8 x 3 inches. WEIGHT: 10 pounds.

Balanced Spectrum Floor Lamp

The Balanced Spectrum Floor Lamp is a low vision light designed for use by individuals with vision disabilities. This lamp simulates the spectrum of natural daylight to aid visibility. The lamp is equipped with a weighted base and a flexible gooseneck for optimal positioning. The unit uses an energy-efficient 8,000 hour compact 27-watt bulb to produce the equivalent lighting of a 150-watt standard bulb. OPTIONS: Replacement bulbs. DIMENSIONS: 50 inches tall with a seven-foot power cord. The bas

Balanced Spectrum Lafayette Boulevard Lamp

The Balanced Spectrum Lafayette Boulevard Floor Lamp is a low vision light designed for use by individuals with vision disabilities. This lamp simulates the spectrum of natural daylight to aid visibility. This torchiere-style lamp provides warm ambient room light, and it has a Balanced Spectrum reading light that extends on a flexible gooseneck from the pole of the torchiere lamp. The reading lamp function uses a 25-watt bulb (included) and the torchiere lamp uses a 3-way 30-watt bulb (included)

Balanced Spectrum Market Street Lamp

The Balanced Spectrum Market Street Lamp is a low vision light designed for use by individuals with vision disabilities. This lamp simulates the spectrum of natural daylight to aid visibility. This 55-watt lamp is brighter than two 100-watt incandescent bulbs combined; however, the brightness can be adjusted to fit the user's needs and activity using a three-way switch which provides a choice of 55 watts, 42 watts, or 27 watts. The lamp is equipped with a flexible gooseneck for optimal positioni

Balanced Spectrum Sunset Boulevard Lamp

The Balanced Spectrum Sunset Boulevard Lamp is a low vision light designed for use by individuals with vision disabilities. This lamp simulates the spectrum of natural daylight to aid visibility. The floor lamp uses two 42 watt bulbs (included) that can be used independently or together. OPTIONS: Replacement bulbs. DIMENSIONS(LxWxH): 10.5 x 10.5 x 60 inches. WEIGHT: 12.8 pounds. COLOR: Antique brass. GUARANTEE: 90-day satisfaction guarantee.

Ballotcall

The BallotCall is a call signal system designed for use in polling places by voters with disabilities. The system provides a means for voters with disabilities to alert election officials when they need assistance. This temporary alert system can be used in government facilities, permanent polling locations and private facilities or venues that are outside of election officials' control. The BallotCall system includes a BigBell wireless alert system (see separate entry) with an oversized touch p

Bariatric Handrail

The Bariatric Handrail is a handrail designed for use by individuals with balance, lower extremity, or mobility disabilities. The handrail is made of aluminum with powder coat. Bracket and return/corner are available in stainless steel with optional powder coat. The grip is 1.5 inches in diameter, and it extends 3 inches from the wall. All mounting fasteners are included with the product. DIMENSIONS (LxD): 12 feet x 1.38 inches. CAPACITY: 1000 pounds. WARRANTY: Limited lifetime warranty.

Bariatric Multifold Portable Ramp (Models Bar536, Bar636, Bar736, & Bar836)

The Bariatric Multi-Fold Portable Ramp is a bariatric portable ramp designed to provide access for wheelchairs and scooters. This welded aluminum ramp separates into two pieces for carrying. The two ramp panels fold in half and are locked together with a closure strap, then carried like a suitcase. The ramp has an anti-slip surface for traction during use and a center joint hinge for strength. The ramp comes with a visual aid to determine if it is on a safe slope. DIMENSIONS (LxW): 5 x 3 feet (m

Bariatric Panel Ramp (Models Bpr348, Bpr448, Bpr548, & Bpr648)

The Bariatric Panel Ramp is a ramp designed to provide wheelchair or scooter access for individuals with mobility disaabilities or spinal cord injury. This ramp consists of three interlocking sections with an additional panel the can be used to increase ramp widths. The outside panel has curbing to keep the wheelchair or scooter in place while in use. The ramp is made of welded aluminum with an anti-slip high- traction surface suitable for all weather conditions, and can accommodate wheelchairs

Bariatric Perching Stool (Model 405)

The Bariatric Perching Stool, model 405, is an adjustable stool designed for use by obese individuals with balance or mobility disabilities. Equipped with a heat-sealed polyvinyl chloride padded seat this chair features tubular tensile steel back, tubular steel arms, an H-section for added strength, and four rubber tipped legs. DIMENSIONS (HxDxW): Seat is 20 to 26 x 12 x 20.25 inches. The footprint is 28 x 18 inches at the lowest position, and 29 x 18 inches in the highest position. The distance

Bariatric Perching Stool (Model 406)

The Bariatric Perching Stool, model 406, is an adjustable chair designed for use by obese individuals with balance or mobility disabilities. This chair has a padded back and tubular arms. The padding is made of heat-sealed polyvinyl chloride for additional comfort and the tubing is of high tensile steel. Additional features include an H-section for added strength. DIMENSIONS (HxDxW): Seat is 20 to 26 x 12 x 20.25 inches. The backrest is 340 to 140 millimeters. The footprint is 28 x 18 inches at

Bariatric Seating (Models 7125, 7130, 7140, 7126, 7231 & 7141)

The Bariatric Seating chair, models 7125, 7130, 7140, 7126, 7231 and 7141, is a reinforced chair designed for use by individuals with obesity and mobility disabilities or by individuals who require support while sitting. The chair has a laminated wood frame, and seat and back platforms are removable. DIMENSIONS: Models 7125 and 7126 are 29 inches wide; models 7130 and 7131 are 34 inches wide; and models 7140 and 7141 are 44 inches wide. SEAT (DXW): 25 X 20 (models 7125 and 7126); 30 X 20 (models

Bariatric Step Stool With Handle (Model Ss-H-05C)

The Bariatric Step Stool With Handle, model SS-H-05C, is a step stool designed for use by individuals with balance disabilities, caregivers, people of short stature, and people who are obese. This single step stool's frame is made of heavy duty tubular aluminum with a textured powder coat that will not rust, and it has a self-leveling anti-tip design. The stool has a platform with safety strips, angled leg tips to prevent slippage, and a vertical steel handrail attached to the back of the platfo

Bariatric Threshold Ramp (Models Btr 1636 & Btr 2436)

The Bariatric Threshold Ramp is an accesible threshold designed to make doorways accessible to individuals who use wheelchairs or scooters. This bariatric threshold ramp is made of lightweight aluminum with an anti-slip, high-traction sandpaper surface. It covers a threshold rise of 1.5 to 3 inches (model BTR 1636) or 2 to 4 inches (model BTR 2436), and comes with mounting holes and the hardware needed to secure it to the door molding. DIMENSIONS (LxW): 16 or 24 x 36 inches. CAPACITY: 800 pounds

Barrier Free Accessible Vanity Systems

The Barrier Free Accessible Vanity Systems are modular, wall mounted units designed for wheelchair clearance in the lavatory. Eight series of models are available in a variety of lengths and configurations from a single bowl vanity 18 inches in length to multiple bowl units up to 144 inches in length. Each series features standard stainless steel towel dispensers, waste doors, soap dispensers, and a variety of faucets and fittings.

Barrier Free Bathtub

---- PROTOTYPE --------- PURPOSE: To design a prototype of a barrier free bathtub for older adults or people with balance, lower extremity or mobility disabilities. The Barrier Free Bathtub has collapsible side walls to facilitate entry and exit of the tub. When entering the bath, the user sits down like sitting on a bed then moves his or her legs into the bathtub. The user then moves a switch located adjacent to the faucets to raise the tub walls. Once the walls are in place, the tub can be fil

Barrier Free Drinking Fountain (Model 6800Wc)

Barrier free drinking fountain. Wall mounted. Stainless steel. Self closing lever handle operates in both directions. Two stream mound building projector with integral hood guard, stream height regulator and antisquirt feature. Stainless steel fountain. DIMENSIONS: 12.5 x 19 x 6.25 inches.

Barrier Free Fountain (Model Ovl-E)

Barrier free drinking fountain. Wall mounted. Stainless steel. Oval shaped receptor with semi circular push bar. Size: 17 inches wide by 18 inches deep by 7 3/8 inches high. Two stream mound building projector and automatic stream regulator.

Barrier Free Shower (Model 3Lrs4848B22B)

The Barrier Free Shower, model 3LRS4848B22B, is an accessible shower stall designed for wheelchair users. This three-piece shower stall is made of plywood-backed fiberglass, and has two walls and a center-drain shower pan with a low threshold. The stall has a polyester gelcoat smooth tile finish. OPTIONS: Shower valve; glide bar/hand shower; seat; grab bars; collapsible water stopper; drain; curtain and rod; amd tile accents. DIMENSIONS (HxDxW): 79 x 49 x 49 inches. Threshold curb height is 2.25

Barrier Free Shower Floor Ramp (Model Bf-1260)

The Barrier Free Shower Floor Ramp, model BF-1260, is a shower ramp designed to make a shower accessible to a wheelchair. The unit coordinates with Swanstone shower and bath systems. This ramp has a slip-resistant surface, and on its reinforced solid surface, color and texture run all the way through and cannot wear away. DIMENSIONS (DxW): 12 x 60 inches. COLOR: Available in 37 different colors.

Barrier Free Shower Floor Ramp (Model Fbf-1260)

The Barrier Free Shower Floor Ramp, model FBF-1260, is a shower ramp designed to make a shower accessible to a wheelchair. The ramp is made of Veritek, and it can be installed without grout. This unit coordinates with the Swanstone shower and bath systems. DIMENSIONS (DxW): 12 x 60 inches. COLOR: Bisque, bone, or white.

Barrier Free Shower Pan

The Barrier Free Shower Pan is a wheelchair accessible shower pan designed for use in building roll in showers. It comes with an integrated drain on the left, right, or center; splash walls; and a barrier-free and/or Americans with Disabilities Act (ADA) compliant entrance. The leak-proof shower pan surface accepts tile directly without liners, mudding, or hot mopping. The pan comes with a round, polished adjustable drain plate. OPTIONS: Square drain plate. DIMENSIONS (DxW): With center drain, 3

Barrier Free Signs.

Barrier free signs. Model PHP 75, Physically Handicapped Parking, 12 by 18 inches, has silk screen design and lettering on 1/8 inch aluminum or porcelain enamel on steel. Signs available with arrows or tow warning. Grade signs, 6 by 6 inches on cast aluminum. Signs show level grade, upgrade or downgrade. Bathroom access 6 by 6 inch plastic engraved signs; custom white copy on blue.

Barrier Free Wardrobe

The Barrier Free Wardrobe is an accessible wardrobe designed for wheelchair users. This wall mounted unit is available with different configurations of closet bar, shelves, or pull out drawers. MATERIALS: This wardrobe can be manufactured in wood or plastic laminate clad particle board. COLORS: Any color.

Barrier Free Water Cooler (Model Bfc 7)

Barrier free water coolers. Wall mounted, height 27 inches from floor to edge of fountain. Front and side push bar actuator have raised letters for the blind. Removable front panel for easy installation and service. 2 stream mound building projector and automatic stream regulator. DIMENSIONS (WxDxH): 18 x 18.5 x 22.75 inches.

Barrier Free Water Dam

The Barrier Free Water Dam is a water dam for showers designed to provide access to a roll-in shower by wheelchair and rolling shower chairs users while containing water. The soft vinyl dam is flexible for wheelchairs to roll over and then return to an upright position. It can be used in conjunction with a shower curtain to keep water in the shower area. The vinyl dam, made of poly-vinyl chloride, fits into an anodized and polished aluminum threshold. Installation requires a hack saw, measu

Barrier-Free Grab Bar (Models Bf-2448 & Gb-1432)

The Barrier-Free Grab Bar is a shower grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities or arthritis. This L-shaped stainless steel grab bar is for use when a shower seat is installed on either side. DIMENSIONS: 14 x 32 inches (model GB-1432) or 24 x 48 inches (model BF-2448).

Barrier-Free Grab Bar (Models Bf-5024 & Bf-5048)

The Barrier-Free Grab Bar is a wall grab bar for shower designed for use by individuals with balance or mobility disabilities. This straight stainless steel grab bar can be used on side walls when a shower seat is installed on the back wall of a shower. DIMENSIONS: Length is 24 inches (model BF-5024) or 48 inches (model BF-5048).

Barrier-Free Shower Floor With Entry Ramp (Model 360)

The Barrier-Free Shower Floor with Entry Ramp is a roll-in shower designed for use by individuals who use wheelchairs or walkers. The curbless floor and entry-ramp system can replace an existing bathtub, is designed for wheelchair access and is slip-resistant. Its offset drain placement (similar to that of a bathtub)in right- or left-hand configutation provides convenient installation or retrofit. The floor is made of molded fiberglass with resistance to mold, mildew and stains and a semigloss

Barton Little Milli Bathing System

The Barton Little Milli Bathing System is a walk-in bathtub designed for use by individuals with physical or cognitive disabilities. This system allows the user to bathe independently within a safe, secure, and hygienic environment. Its compact design allows it to be a free-standing unit or built into a tub enclosure. Tub fill is thermostatically controlled to prevent scalding. A side door provides step-in access, or the user can be transferred into the tub. OPTIONS: Whirlpool; lifter access cut

Basement Motorhome Lift (Model 129)

The Basement Motorhome Lift, model 129, is a wheelchair lift without a platform for use on high floor motorhomes and buses with a floor height between 34 and 51 inches. Instead of a platform to support the chair, manual and powered wheelchairs and their occupants are raised and lowered by means of a pivoting arm and a vertical track. The lift requires only 9.5 inches of wall space inside. The lift will not interfere with other people entering the vehicle. Chains with webbed strapping attach onto

Basic Walk-In Bathtub

The Basic Walk-In Bathtub is an accessible bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. This tub has a wide door with a lever-style handle, and is available with a right- or left-hinged door. It also has a safety speed middle drain. OPTIONS: Hydrotherapy package with variable speed 12-jet hydrotherapy spa and hot temperature maintainer; whirlpool package with two-jet whirlpool system; wall surround system with three-sided matching surround wa

Bath In Bed (Model Bb-1) & Portable Bath In Bed (Model Pbb-1)

The Portable Bath in Bed, model PBB-1, is a bed shower designed for use by individuals with mobility or severe physical disabilities. This system consists of a soft, flexible under liner surrounded by a lightweight, collapsible aluminum frame that supports the liner to create a bathtub; a shower unit with an electric pump to dispense water with the capacity to provide one continuous 10.5-minute shower; a flexible hose that connects to the under liner and the included waste water collection bottl

Bath Platform Step (Model 604)

The Bath Platform Step, model 604, is a bathtub access stair designed for use by individuals with arthritis or mobility or balance disabilities. The wooden step is made of birch with non-slip cork top and is designed to make getting in and out of the bath easier by reducing the distance from the floor to the top of the bathtub. DMENSIONS: The step is 6 inches high (152 millimeters). CAPACITY: 140 kilogram.

Bath Replacement Shower (Model Xst 6030 Bfkd 1)

The Bath Replacement Shower, model XST 6030 BFKD 1, is a curbless four-piece gel-coat roll-in shower with built-in seat and grab bar designed for use in assisted living, nursing home, and healthcare facilities serving individuals with lower extremity disabilities. This four-piece sectional shower replaces a standard tub for renovation projects with limited interior space and the need to fit into existing footprint and plumbing configurations. The unit fits the footprint of most existing tub/sho

Bath Replacement Shower (Model Xst 6030 Shkd 4)

The Bath Replacement Shower, model XST 6030 SHKD 4, is a four- piece gel-coat shower with built-in grab bar designed for use in assisted living, nursing home, and healthcare facilities serving individuals with lower extremity disabilities. This four-piece sectional shower replaces a standard tub for renovation projects with limited interior space and the need to fit into existing footprint and plumbing configurations. The standard left or right drain location eliminates the need to relocate the

Bath Safety Toilet Safety Bar (Model 575)

The Bath Safety Toilet Safety Bar, model 575, is a grab bar for toilet designed for use by individuals with balance or mobility disaibilies. This unit provides handles on both sides for use in getting on and off the toilet. Made of molded plastic tubing, it comes with adjustable mounting clamps and fits most standard and elongated toilets. DIMENSIONS (HxDxW): 8.5 x 23 x 18 inches. The tubing is 1 inch in diamter. CAPACITY: 250 pounds. COLOR: White.

Bath Steps For Child With Angelman Syndrome

CUSTOM ADAPTATION PURPOSE: To provide customized bath steps for a child with Angelman Syndrome. To assist the child’s mother with reducing lifting and relieving back strain from assisting her daughter in getting into the bath, a step-stool with a rail on one side was designed. A 19-millimeter piece of steel tubing was used for the frame, and was painted with white enamel. The stool has a 720-millimeter high hand rail on one side, and no rail on the other side. No railing on one side allows the

Bath+Safe Deluxe Tub Safety Rail (Model F72716-4000)

The Bath+Safe Deluxe Tub Safety Rail, model F727216-4000, is a clamp-on grab bar for bath tub designed for use by individuals with balance or mobility disabilities. This rail features a large base with an easy-to-grasp non-metal A-shaped handle. The base clamps over the edge of the tub and tightens with a large T-shaped knob. Rubber pads inside the base protect the tub from scratches. DIMENSIONS: The rail is 14.75 inches high and fits tubs 3 to 7 inches thick.

Bath+Safe Swirl Grip Designer Grab Bars (F72460 Series)

Bath+Safe Swirl Grip Designer Grab Bars, F72460 series, are wall grab bars designed for use by individuals with balance and mobility disabilities. These bars have a swirl texture for a non-slip grasp, even when wet. Diamond-shaped mounting brackets conceal the installation screws. Mounting hardware is included. DIMENSIONS: Available in 12, 16, 18, and 24 inches long. All bars are 1.25 inches in diameter and extend 1.5 inches from the wall.

Bathcrest Walk-Thru Insert

The Bathcrest Walk-Thru Insert is a bathtub insert designed for use by individuals with arthritis or balance, lower extremity, or mobility disabilities. This insert, which fits most bathtubs, lowers the barrier to bathtub entry and converts the bathtub into a walk-through shower with an entranceway close to the height of normal steps.

Bathease

The Bathease is a walk in bathtub and shower unit with a 24 inch water tight door built into front of tub. The tub is made of fiberglass. DIMENSIONS (WxDxH): Standard dimensions are 60 x 30.5 x 22.25 inches; other sizes available. COLOR: Available.

Bathmaster Sonaris

Bathmaster Sonaris is designed to assist users with limited mobility and balance as well as their caregivers during transfers in and out of the bathtub. The Bathmaster Sonaris is operated by a rechargeable battery and can perform an average of 18 lifts per charge. There is an audible beep and a blinking light to alert you when the battery needs to be recharged. The operator buttons on the hand controller are simple and large to make it easy for anyone to operate. The seat and back snap together

Bathroom Door Modification.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Curtain used instead of a door to allow a wheelchair through the doorway. Bathroom (or other) entrance widened by removing the door and installing an expansion rod, with material soft enough to gather and heavy enough to ensure privacy hung from it with shower rings. The curtain can be drawn back and held open with a tieback fastened with velcro. Includes drawings. SKILLS REQUIRED: Sewing. Assembly. AUTHOR: Hamilton, L TITLE: Why Didn't Somebody Tell M

Bathroom Flood Alarm

The Bathroom Flood Alarm is designed for use with individuals with cognitive disabilities or Alzheimer's disease. This sensor mounts to the lower wall near the toilet and sounds a loud alarm when it comes in contact with a puddle on the floor created when a tub overflows or a toilet overflows dut to the introduction of foreign objects or other blockages. COLOR: White.

Bathroom Gem Floor Toilet

The Bathroom Gem Wedge Toilet is a floor toilet designed for use by individuals who use catheters and leg bags. Intended to assist in independent management of leg bag emptying, this stainless steel toilet sits flush with floor and can be installed in any convenient location selected by the individual; it is designed to fit easily between the floor joists in most homes. The flushing mechanism is activated by an electronic sensor when a wheelchair is moved over the unit and ceases when a wheelch

Bathroom Gem Wedge Toilet

The Bathroom Gem Wedge Toilet is a floor toilet designed for use by individuals who use catheters and leg bags. Intended to assist in independent management of leg bag emptying, this stainless steel toilet sits on the floor and can be installed in any convenient location selected by the individual; special installation is not required and it can be moved from one location to another. The flushing mechanism is activated by an electronic sensor when a wheelchair is moved over the unit and ceases w

Bathroom Grab Bar (Models 410085, 410086, 410087, 410088, 410090, & 410091)

The Bathroom Grab Bar are wall mounted grab bars designed for use by seniors and individuals with physical disabilities. These bars are made of stainless steel with an exposed screw mount. DIMENSIONS: Length is 9 inches (model 410085), 16 inches (model 410086), 18 inches (model 410090), 24 inches (model 410087), 32 inches (model 410088), or 36 inches (model 410091). Diameter is 1.25 inches (models 410090 and 410091) or 0.88 inches (models 410085, 410086, 410087, 410088, 410090, and 410091). COLO

Bathroom Grab Bars

The Bathroom Grab Bars are wall grab bars designed for use by individuals with balance or mobility disabilities. Available in straight, right angle, or left angle models, these heavy-gauge steel bars provide additional support for sitting, standing, or transferring. Hardware for installation is included. DIMENSIONS: The straight models are available in 12, 16, 18, 24, or 32 inches long. The angled models are 24 x 16 inches. CAPACITY: 250 pounds. COLOR: Chrome or white.

Bathtub Grab Bar

The Bathtub Grab Bar is a grab bar for bathtub designed for use by individuals with balance and mobility disabilities. This U-shaped bar features a wide clamp base that fits over the edge of the tub. A screw clamp adjusts the width for a secure fit. DIMENSIONS: The unit fits tub walls 3 to 7 inches thick. The bar is 19.5 inches tall and extends 14.75 inches above the tub. The width adjusts from 8 to 11.5 inches.

Bathtub Rail With Chrome Finish

The Bathtub Rail with Chrome Finish is a grab bar for the bathtub designed for use by individuals with mobility disabilities. The rail provides the individual with support while moving into or out of the bathtub. The rail clamps to the tub with adjustable spring steel clamps lined with rubber pads to protect the tub. DIMENSIONS (HxDxW): 7 x 0.75 x 11 inches. The clamp adjusts from 3.5 to 6 inches in unlimited increments. COLOR: Chrome finish.

Bathtub Safety Rails (Models 1240, 1250, 1255, 1260, & 1265)

Bathtub Safety Rails are bathtub grab bars designed for use by individuals with balance or mobility disabilities. Made from powder-coated steel (models 1250 and 1255), plastic (models 1260 and 1265), or a composite material (model 1240), these rails provide added stability when getting in and out of the bathtub. Models 1240, 1250, 1255, and 1260 have two grip handles, including a lower one that allows for a seated grip position. Model 1265 has one grip handle. The rails attach to the tub sides w

Bathtub Safety Rails (Models H100, H200, H250 & H300)

The Bathtub Safety Rails are grab bars for bathtubs designed to provide stability for individuals with physical or neurological disabilities while bathing or transferring. Model H100 is made of steel with a white polyester coating. Models H200, H250 and H300 are made of chrome-plated steel. The mounts are coated with soft plastic brushing. DIMENSIONS: Model H100 - 5.74 x 14.75 inches; Model H200 - 11.75 x 11 inches; Model H250 - 16 x 14.75 inches; Model 300 - 18 x 6 inches. WEIGHT: Model H100 -

Battle Creek Deluxe Bedwarmer (Model 358)

The Battle Creek Deluxe Bedwarmer, model 358, is a foot warmer designed for use by individuals with circulatory disabilities or other conditions that cause cold feet. This electric warming pad slips under the sheet and mattress pad. It features a large switch on the power cord that is designed for easy use by seniors and others with fine motor disabilities. In addition to turning the bed warmer on and off, the switch allows the user to choose between high and low temperature settings. The unit h

Battle Creek Standard Bedwarmer (Model 058)

The Battle Creek Standard BedWarmer, model 058, is a foot warmer designed for use by individuals with circulatory disabilities or other conditions that cause cold feet. This electric warming pad slips under the sheet and mattress pad. It features a large switch on the power cord that is designed for easy use by seniors and others with fine motor disabilities. The switch is lighted when the pad is on. POWER: Uses standard household current. DIMENSIONS (LxW): 36 x 18 inches. The power cord is 10 f

Bci Grab Bars

BCI Grab Bars are wall grab bars designed for use by individuals with balance, mobility, or lower extremity disabilities. These grab bars can be mounted vertically, horizontally, or on an angle. DIMENSIONS: 16 or 24 inches long. COLOR: White, almond, biscuit, or gray.

Bci Walk-Thru Insert

The BCI Walk-Thru Insert is a bathtub insert designed to convert a standard bathtub into a walk-in shower tub accessible to individuals with balance, lower extremity, or mobility disabilities or arthritis. COLOR: White.

Beachrings2

Beachrings2 is a ground retention grid system for use on sandy areas to allow access over loose sand by pedestrians, wheelchair or scooter users, and other individuals with special ambulatory requirements. The tile material is made of injection molded Low Density Polyethylene (LPDE) consisting of very strong rings projecting from one side of a flexible grid and perforated membrane layer with slightly raised traction discs. Units can be linked together with integral posts and holes and either per

Beam N Read Led 6 Deluxe Hands Free Light (Model Bnr Led 6-3)

The Beam N Read LED 6 Deluxe Hands Free Light, model BNR LED 6-3, is a battery-operated lamp designed for use by individuals with low vision, mobility, or upper extremity disabilities. This versatile light is worn around the neck with the included adjustable neck strap to provide steady, hands-free lighting for reading, crafts, and other personal tasks. The light also provides personal space lighting for walking or wheeling a wheelchair in the dark and during power outages. The light is turned o

Bean Bag

The Bean Bag is a bean bag chair designed for use by youth and toddlers with cognitive or emotional disabilities or autism or with marginal trunk control. The chair is covered in heavy-duty, flame-retardant vinyl and filled with polystyrene beads that mold to the body. Features include an interior safety locking zipper and the surface can be cleaned with a damp cloth or non-bleach spray. SIZES: Toddler and youth. DIMENSIONS: The toddler size is 26 inches in diameter and 82 inches in circumferenc

Bed Access Support

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with mobility disabilities to transfer from a walker to her bed safely without assistance. The device was constructed from plywood that extended under the mattress and up the side] and a piece of 0.75 x 3 inch board that sits on the mattress top. Holes were drilled into the board to which a spare wheelchair armrest was attached. TITLE: The Bed Access Support. WEB SITE: Workshop Solutions at http://www.workshopsolutions.com/COMPLETE/bedacc

Bed Aid For Mattress With Side Support Rail (Model 130)

The Bed Aid for Mattress with Side Support Rail, model 130, is a grab bar for bed designed for use by individuals with mobility or balance disabilities. This tubular aid is designed to assist movement in bed. The large foot profile slides under mattress and the unit is counterbalanced by the bed side support rail. DIMENSIONS: The height of the side support is 509 millimeters (mm), the width of the base at the widest point is 597 mm, and the width of the support rail is 330 mm.

Bed Assist For Home Style Beds With Cushioned Hand Grip

Bed Assist Handle for Home Style Beds with Cushioned Hand Grip is designed for persons with limited mobility, the elderly, or those who have difficulty with balance, as it helps the user get in and out of bed safely. To set up, slide between the box spring and mattress. Laminated wood base. Cushioned hand grip.

Bed Buddy Plush Thermatherapy Neck Pillow

The Bed Buddy Plush ThermaTherapy Neck Pillow is a cervical pillow designed for use by individuals with neck and shoulder pain or arthritis. Filled with 100 percent all natural ingredients, this compact pillow drapes over the neck and shoulder while providing moist heat. It is long lasting, reusable, and lightly fragranced with lavender and chamomile. Other features include a velvety cover that is removable and washable. DIMENSIONS (HxLxW): 11.25 x 13.25 x 1 inches.

Bed Cane

The Bed Cane is a transfer aid designed for use by individuals with mobility disabilities. This device consists of a large, crook-shaped handle with a cushioned grip and a powdercoated shaft affixed to a wooden base. The base fits between the mattress and box springs to provide stability for the handle which can be used for assistance while entering and exiting the bed, as well as to maintain balance while rising to a standing position or transferring to a wheelchair. The unit can be installed o

Bed Desk

The Bed Desk is a bed tray, bookholder, and laptop/notebook computer support designed for use by individuals with mobility, upper extremity, or severe physical disabilities or spinal cord injury. This unit is a book stand with legs like a bed tray. The two legs are collapsible and the desk can be adjusted to an angle for holding books, paper, or magazines. Made of imported Baltic birch, the unit supports up to 20 pounds and can be used with the legs extended or folded. When the legs are folded,

Bed Enclosure

CUSTOM ADAPTATION PURPOSE: To provide a child with developmental disabilities with a safe sleeping environment and keep her from climbing out. The slatted base of the bed sat below the edge of te side rails. Runners were fitted to the inside of the side rails and the slatted base was raised to sit on the runners. The enclosure has independent support legs and can be unscrewed and removed if necessary. The enclosure has a wooden frame with two latched gates on each side. Sturdy, tranluscent whit

Bed Extension

CUSTOM ADAPTATION PURPOSE: To provide a bed extension for a hospital-style bed for a tall individual with acquired brain injury. A 150-millimeter extension with two metal bars was made that bolted into the existing holes at the top end of the bed base. A headboard, padded and covered with vinyl, was fixed at right angles to the bars. Straps with Velcro strips were used to fix the lower section of the mattress in position. This adaptation reduced the how often the individual’s position had to b

Bed Modification For Child With Angelman Syndrome

CUSTOM ADAPTATION PURPOSE: To provide a customized bed for a child with Angelman Syndrome. An evaluation of a standard IKEA bed already being used by the child resulted in the idea to turn the footboard into a gate. The customization had two parts: 1) the removal of the footboard and 2) the construction of an end gate. After removing the footboard, the end of the bed frame was strengthened with 19- millimeter plywood. The disassembled footboard was rebuilt to make a rigid end gate. The fitting

Bed Rails

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create custom adapted bed railings to protect a child with cerebral palsy, developmental delay, and vision impairment from hurting herself by climbing out of bed. The parents had purchased a bunk bed set that had a potential for modification with a solid frame and clean sides making it easy to add attachments. Matching the style of the bed, three new rails were added with the fourth side fixed to the wall. Extensions were made for the head and foo

Bed Rope Ladder (Model Ha-4508)

The Bed Rope Ladder, model HA-4508, is a bed ladder designed for use by individuals with mobility disabilities. The ladder is used to pull up to a sitting position in either a single or double bed. Ends of the rope cords are tied around the bed legs. WEIGHT: 286 grams.

Bed Side Rail Padded Cover (Model 120)

The Bed Side Rail Pad, model 120, is a side rail pad designed to prevent bruising or entrapment. These covers are made of plasticized mesh and are padded for comfort. The covers are equipped with a reinforced hole to accommodate tubes or wires.

Bed Surround

CUSTOM ADAPTATION PURPOSE: To provide a customized adaptation to a hospital bed frame for a young adult with a rare genetic disorder. A standard hospital bed with collapsible tubular steel rails was not ideal as the consumer was in danger of injuring himself due to involuntary movements. Placing the bed flush to the floor was not ideal for caregivers because it placed them at risk for back injury. A frame and net system was designed to attach to the existing hospital bed. Four metal posts are m

Bed Surround

CUSTOM ADAPTATION PURPOSE: To prevent a child with intellectual, communication, mobility, and vision disabilities from leaving the bed unattended during the night. An enclosure for the bed was built using eight plywood panels covered in fabric-covered foam. Each panel is equipped with two metal handles on the back to enable the child's parents to remove one or more when assisting the child in and out of bed or when changing sheets. Three panels fit down each side and the bed has a U-shaped pane

Bed Surrounds

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted bed enclosure for a child with global developmental delay and autism. The child outgrew her crib and her parents fitted her new bed with bedrails to prevent her from getting out; however, the child still managed to get out in the night despite being unable to crawl or walk. Concerned about the child’s safety, the family contacted TADNSW for assistance in creating bed surrounds for the bed to help keep the child safe. Three

Bed Wedge With Pocket

The Bed Wedge with Pocket is a positioning wedge or wedge pillow designed for use by individuals with circulatory, lower extremity, respiratory or digestive disabilities or neck, back, or shoulder pain or injury. Filled with shape-retaining latex foam, this wedge is made of durable foam with a washable zippered cover, and it provides elevation for the head, foot or leg while in bed. Features includes a 7-inch sewn in pocket for storing small items such as television remote controls, magazines,

Bedmount For Ipad Air

BedMount for iPad Air is designed for individuals with multiple sclerosis, muscular dystrophy, spinal cord injuries or any other neurological impairments that impact mobility and accessibility while positioned in bed. The Bed Mount is designed to work for all types of mattresses. It is positioned under the mattress for stability.

Bedrail Adaptations

CUSTOM ADAPTATION PURPOSE: To enable an individual with multiple sclerosis to raise and lower side rais on a home hospital-style bed independently. The rails were mounted toward the head of the bed and folded toward the foot of the bed, making it impossible for the user to raise or lower them while in bed. The rails were reversed and re-mounted toward the foot of the bed, enabling them to be opened from the top by the user. TITLE: Bathroom Assistance. JOURNAL: TAD Journal. REF: Volume 26, Numbe

Bedside Computer Stand

CUSTOM ADAPTATION PURPOSE: To enable an individual with spinal cord injury to utilize a computer from a bed. The base of the stand is a standard overbed table on a wheeled base. A box of varnished plywood on a caster base was added to the table. The box was equipped with a central shelf, creating three surfaces on which to store computer equipment and other items. The original table surface was attached to the side of the box and is height adjustable using a trinut. The surface also rotates so

Bedside Computer Stand And Monitor Positioning System

CUSTOM ADAPTATION PURPOSE: To position a computer screen to be easily seen from a bed, hold the monitor and printer, and store other computer-related equipment such as cables and CDs) for an individual with quadriplegia. Laminated MDF was used to make a stand, which has a base with locking castors, a range of drawers for storage at the bottom and shelves above them, one with larger space to hold the monitor. There is also a pull-out shelf above the drawers for a keyboard and can be used when i

Bedside Table

CUSTOM ADAPTATION PURPOSE: To provide custom adaptation to bedside table for an individual with rheumatoid arthritis. A plywood box was constructed and screwed into an existing table top. The inside of the box forms a lower shelf, and the top forms the upper one. Inside the box, a shelf mounted on drawer runners was added. The shelf has a small hook-style handle in the center for easy, out of the way use. A small gap all the back of the box accommodates cords for various equipment. A larger hol

Bellman Amplified Telephone Ringer

The Bellman Ringer is designed for use by individuals who are hearing impaired, hard of hearing or deaf.  It amplifies the telephone ring and allows the user to adjust not only the ring volume but also the ring characteristics. The adjustable ring frequencies are optimized for the best audibility and the light signal further facilitates the recognition.

Belmont Pu Corner Shower Stool (Model 124)

The Belmont PU Corner Shower Stool, model 124, is an adjustable shower stool designed for us by individuals with mobility or balance disabilities. This stool has a plastic coated tubular steel frame and a polyurethane molded padded seat. It is designed to fit into the corner of a shower, allowing full access to the caretaker. It has four rubber tip legs. DIMENSIONS: The seat height adjusts from 20 to 24 inches, the seat width is 16 inches, and the seat depth is 13.125 inches. The footprint is 1

Beneke Samaritan Lift Seat (Model Sl 503)

The Beneke Samaritan Lift Seat, model SL503, is toilet lift seat designed for use by individuals with physical disabilities. The lift raises the seat height by 3-7/8 inches. The seat is elongated and has an open front. A full rotational stainless steel hinge bracket raises the lift seat two inches away from the bowl for cleaning. The sanitary inner rim directs all moisture into the bowl and prevents moisture flow to the outside rim. The seat is made of plastic with stainless steel mounting bolts

Beneke Universal Sheltering Arms Seats (Models Sa500 Pc, Sa501 Pc, & Sa507 Pc)

The Beneke Universal Sheltering Arms Seats, models SA500 PC, SA501 PC, and SA507 PC, are safety frames with elongated seats designed to attach to toilets. The support arms are fashioned from one continuous piece of heavy-gauge, non-corrosive stainless steel tubing with a powder coat finish. Arms have polypropylene pistol grips. Model SA500 PC comes with a closed front seat with cover. Model SA501 PC comes with an open front seat with cover. Model SA507 PC comes with a closed front seat without c

Berlin Button

The Berlin Button is a pedestrian signal control switch designed for use by individuals who are blind, deaf blind, or who have low vision or mobility disabilities. The button can be fitted to all traffic lights, including retrofits. The button has a large surface and is touch sensitive. Available features include extension of the green phase for pedestrians with mobility disabilities; audible signals for visually impaired pedestrians; tactile signaling through a vibration module for pedestrians

Besam Electra 150 Series

The Besam Electra 150 Series are commercial powered door operators suitable for residential use on standard or swinging doors, both inside and outside. The units are available with remote control, key controls, push button, sensor, elbow switch, contact mats, or kick plate switchs. Hold open time is adjustable from 0 to 30 seconds. An optional security lock when power is on is available. POWER: 110 volt 4 amp. If power fails, 14 pounds of force are required to open the connected door. DIMENSIONS

Besam Powerglide 4000 Automatic Sliding Door System

The Besam Powerglide 4000 Automatic Sliding Door System is a powered door operator system that can be installed in new or existing installations on interior or exterior doors. The operator is mounted on a frame, which is supplied with the unit. FEATURES: Opening time is adjustable from 0 to 5 seconds; hold open time is adjustable from 0 to 45 seconds; door automatically stops if obstructed; and security lock when the power is off. If the door is locked and the operator is activated, the operator

Betadoor

BETAdoors are automatic opening and closing doors that allow hands-free operation in commercial or residential buildings. Specifically, they are electric powered roller blind mechanisms that are self-contained in vertical aluminum frames. Low voltage floor mats, electric eye sensors or push buttons trigger the doors to operate. BETAdoor is available in single (160 Watts), double (320 Watts), 3-way (480 Watts), and 4-way (640 Watts) models. All models available in wheelchair dimensions. BETAdoors

Better Living Modular Homes

Better Living Modular Homes are prefab houses designed for use by wheelchair or walker users and others with physical disabilities. These homes are affixed to a permanent foundation (crawl space, basement, or pilings) and have floor plans with one to five bedrooms and one to three bathrooms. Features include wider hallways and doorways; closets with bi-fold doors; expanded space in bathrooms; rocker-style light switches for individuals with fine motor disabilities; light switches set lower in th

Betterposture Kneeling Chair - Standard (Model F1420)

The BetterPosture Kneeling Chair - Standard, model F1420, is a height-adjustable posture chair designed to promote good posture and strengthen the lower back muscles. The user sits in a kneeling posture with the knees resting on a knee pad. This manually height adjustable kneeling chair has a steel frame with nylon casters. The seat and knee pad are made of supportive polyurethane foam covered with durable fabric. DIMENSIONS (HxLxW): 21 to 28.5 x 29 x 18 inches. The seat is 12.5 x 17.5 inches. T

Bi-Level Tub Grab Bar

The Bi-Level Tub Grab Bar is a grab bar for the bathtub designed for use by individuals with balance or mobility disabilities. Ergonomically designed to encourage a proper grasp while entering or exiting the tub, this heavy-gauge welded steel bi-level bar clamps to the tub using a stainless steel locking mechanism and rubber pads. The unit can be installed without tools for temporary or permanent use. DIMENSIONS: The bar extends 14.75 inches above the tub and adjusts to fit tubs from 3 to 7 inch

Bidan Pneumatic

The Bidan Turbo is a toilet bidet designed for use by individuals with physical or mobility disabilities. The device consists of a toilet seat equipped to deliver a stream of oxygenized warm water for cleansing and warm air for drying. The user activates the device by a pressing on micro switches with a foot or another part of the body. The seat, lid, and antibacterial water spray nozzle are removable for cleaning. The seat fits most standard toilets. OPTION: Raised seat.

Bidan Turbo

The Bidan Turbo is a toilet bidet designed for use by individuals with physical or mobility disabilities. The device consists of a toilet seat equipped to deliver a stream of oxygenized warm water for cleansing and warm air for drying. For privacy, a remote control allows the device to be activated by a caregiver outside the bathroom. The seat, lid, and antibacterial water spray nozzle are removable for cleaning. The seat fits most standard toilets. OPTION: Raised seat.

Bidetspa (Models Cb7500, Cb7510, Cb7700, & Cb7710)

The BidetSpa is a toilet bidet and personal cleansing system designed for use by individuals with incontinence. This electronic replacement toilet seat bidet attaches to most elongated or round toilet bowls. Features include posterior wash, feminine wash, heated seat, self-cleaning nozzle, warm air dryer, variable water temperature and pressure, spray guard, and automatic deodorizer. The unit is available in round (models CB7510 and CB7710) or elongated (models CB7500 and CB7700). POWER: Uses a

Bidetspa With Wireless Remote (Models Cb-7500R, Cb-7510R, & Cb-7710R)

The BidetSpa with Wireless Remote, models CB-7500R, CB-7510R, and CB-7710R, is a toilet bidet and personal cleansing system designed for use by individuals with physical or mobility disabilities or incontinence. This electronic replacement toilet seat bidet attaches to most elongated or round toilet bowls. It comes with a wall-mountable wireless remote control. Other features include posterior wash, feminine wash, heated seat, self-cleaning nozzle, warm air dryer, variable water temperature and

Big Button Electric Bed Control

The Big Button Electric Bed Control is a bed control panel designed for use by individuals with fine motor, upper extremity, or severe physical disabilities or spinal cord injury. The control face features six large, heavy-duty buttons to control the head up/down, foot up/down, and bed up/down. Buttons function using the weight of the user's hand and do not require finger dexterity.

Bigbell Basic & Bigbell Xl

BigBell Basic and BigBell XL are accessible doorbells designed for use by individuals with upper extremity or severe physical disabilities or spinal cord injury. This wireless doorbell features an oversized touch pad button marked with the universal access symbol and is designed to enable individuals with disabilities to summon entry assistance when a powered door operator is not available. BigBell has a range of 100 feet from touch button to receiver. BigBell XL has a range of 600 feet, and als

Bighorn Plastic Threshold (Model Bhr1110)

The BigHorn Plastic Threshold, model BHR1110, is a threshold ramp designed for use to make doorways accessible to wheelchair users. This threshold is slip resistant and can support a heavy load. Made from recycled plastic, it can be vertically cut for height and notched for door molding with typical rotary saws. It has molded miter ends and comes with high grade butyl rubber peel and stick tape for installation. OPTIONS: Shim kit to accommodate rise up to 2 inches. DIMENSIONS (LxW): 12 x 42.75 i

Bilevel Barrier Free Water Cooler (Models Ht-Esr & Ovl-Esr)

Barrier free water coolers with attached general public cooler. Wall mounted. Model HT-ESR has lever handles; sizes: 12 1/2 inches wide by 19 inches deep by 6 1/4 inches high and 10 inches wide by 10 inches deep by 7 5/8 inches high. Model OVL-ESR has semi circular handles; sizes: 17 inches wide by 18 inches deep by 7 3/8 inches high, and 17 inches wide by 13 5/16 inches deep by 7 3/8 inches high. Both models have two stream mound building projector and automatic stream regulator with chiller an

Bilingual Braille Signs

Bilingual Braille Signs are tactile facility signs with engraved English and Spanish printed messages along with Grade 2 Braille translations of each language. These acrylic signs are available with the following messages: Women/Mujeres, Men/Hombres, Restroom/Baños, Lunch Room/Merendero, Stairway/Escaleras, No Smoking/No Fumar, Exit/Salida, and Elevator/Elevadore. All lettering is in capital letters. MOUNTING: Foam tape supplied with each sign for indoor mounting. DIMENSIONS: 8 x 4 inches. COLOR

Bilingual Handicap Access Sign (With Access Symbol) (English/spanish) (Model 1573)

The Bilingual Handicap Access Sign (with Access Symbol) (English/Spanish), model 1573, is a bilingual access sign designed for use to indicate a wheelchair accessible route into a polling place or other public area. This sign has the International Access Symbol, a stylized drawing of a figure seated in a wheelchair, with the words, "Handicap Access," above the symbol and the phrase, "Acceso Para Personas Con Discapacidades," below it. The sign is imprinted on both sides and comes with a wire H-f

Bilingual Handicap Accessible Sign (With Arrow & Access Symbol) (English/spanish) (Model 1572)

The Bilingual Handicap Accessible Sign (with Arrow & Access Symbol) (English/Spanish), model 1572, is a bilingual access sign designed for use to indicate wheelchair accessible routes for individuals with mobility disabilities or spinal cord injury. The sign features the phrase, "Handicap Accessible," above the International Access Symbol, a stylized drawing of a figure seated in a wheelchair, with a left pointing arrow beside it. Below the symbol and arrow is the phrase, "Acceso Para Person

Bilingual Traffic And Parking Signs

The Bilingual Traffic and Parking Signs are access signs with the international access symbol and written messages in English and Spanish. The screened messages appear on the same side of the sign with English first and then the Spanish separated with a thin line. Messages include the following: Parking/Estacionamiento, Wheelchair Ramp/Rampa para Incapacitados, Access at Rear/Acceso al Exterior, and Van Accessible/Camioneta Disponible. Signs are made of 18 gauge steel. DIMENSIONS: 18 x 24 inches

Biolock 333

Biolock 333 is a fingerprint door lock with remote control and a lever handle, designed for use by individuals with fine motor or grasping disabilities. This remote-controlled fingerprint lock for single-latch doors has a programmable LED control with storage for up to 99 users, a 500-dots-per-inch optical fingerprint reader, CMOS image sensor, and a reversible lever handle that can be installed to the right or left. The lock has three levels of administrator security which allow the administrat

Bladeless Fan

This Bladeless Fan has no moving parts. It has continuously changing LED lights and no visible fan blade making it safe for curious children. Works both with and without a switch.

Body Pillow

The Body Pillow is a body support pillow designed for use by individuals with back, neck, and shoulder pain. This pillow is designed to reduce strain on the head, neck, back and shoulder, cushion the entire body, and promote proper spine alignment. The pillow is stuffed with hypo-allergenic 100 percent polyester fill and is machine washable. OPTIONS: A machine washable protective cover made of a polyester-cotton blend is available. DIMENSIONS: The pillow is 48 inches long and the cover is 56 i

Boldstep Safety Stair Tread

Boldstep Safety Stair Tread is an anti-slip stair tread designed to improve stairway footing of individuals with physical or walking disabilities. This durable anti-slip stair tread is built into an aluminum platform with an epoxy-based filler. The tread can be anchored into cement, steel, or wood surfaces, and can be used in new construction or attached to existing stairs in renovation projects, including interior or exterior stairs in high-traffic areas. Treads are chemical resistant and ultra

Boolee ADA Compliant Booth

The Boolee ADA Compliant Booth is a wheelchair accessible voting booth designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. The unit has a 1-inch diameter tubular aluminum frame with urethane-coated polyester fabric side panels and an ABS sheet table. All fasteners are zinc plated. This voting booth has an X-brace design and folds for storage and transportation. OPTIONS: Precinct on a Cart system for storage and tran

Boolee Twin Booth With Ada Compliant Station

The Boolee Twin Booth with ADA Compliant Station is a wheelchair accessible voting booth designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. The voting booth has a tubular aluminum frame with an X-Brace system so it can be folded for transportation and storage. Side panels are urethane-coated polyester fabric. OPTIONS: Precinct on a Cart system for storage and transport. DIMENSIONS (HxDxW): 60 x 24 x 59 inches; 60 x

Boomerang Bar (Model 1220)

The Boomerang Bar ##1220 is a stainless steel wall grab bar for use in a shower or bathtub, or by a toilet. This support consists of a half diamond shaped bar bent at 110 degrees, that mounts to the wall in two places at the ends. This bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS: Each side is 12 inches, with 20 inches separating the two ends; 1, 1.25, or 1.5 inch diameter tubing. Safety wall clearance is 1.5 inches. FINISH: B

Boppy

Boppy is a body positioner designed to provide support for infants in a prone or suppine position and to provide support while sitting for young children.The C-shaped padded, cushion style support features an opening to cradle an infant or to fit around a child's hips. Two of these cushions may be stacked for support while sitting. OPTIONS: Cotton slipcover. COLOR: The pillow is white. The slipcover is available in blue with bees or pistachio dots.

Boys Restroom Ada Sign & Girls Restroom Ada Sign

The Girls Restroom ADA Sign and Boys Restroom ADA Sign are braille signs designed for use by individuals who are blind or who have low vision. Each sign is made of high impact styrene with a non-glare surface, and can be used outdoors or indoors. Each sign features a pictogram of a boy or a girl with the word "BOYS" or "GIRLS" in sans serif lettering and Braille. Each sign comes with double-faced adhesive tape on back for mounting. DIMENSIONS (HxW): 9 x 6 inches. Signs are 1/8 inch thick with 0.

Bp442 Elevator Braille Jamb Plate

The BP442 Elevator Braille Jamb Plate is a braille elevator button label designed for use by individuals who are blind or have low vision. These plates have a powder epoxy background color with brushed stainless steel character(s). Standard plates carry one or two characters; three-character plates are also available. Plates are 19 gauge with pressure sensitive adhesive backing. DIMENSIONS (HxW): 4 x 4 inches (some 3-character plates may be 4 x 5 inches). Characters are 2 inches high. Plate is 0

Bradpack Wash Center (Models 1027, 1127, 1128, & 1123)

Lavatory with blade faucets, meets ANSI A117.1 1980 specifications. Countertop model, stainless steel, 17 1/8 by 11 3/4 inches, 5 inch apron. Mirror, towel dispenser, optional cup dispenser, waster receptacle, light, electrical outlet optional.

Braided Stair Rugs

The Braided Stair Rugs are non-slip stair tread coverings designed for use by individuals with balance or walking disabilities. Made of soil- hiding polyester with a rubberized backing, these woven carpet treads aid in protecting against slipping while climbing stairs. They can be permanently installed with tacks (included) and placed on wood, tile or concrete steps. DIMENSIONS (LxW): 28.75 x 8.75 inches. COLOR: Natural, navy, hunter green, and burgundy.

Braille / Tactile Designer Graphic Signs

The Braille/Tactile Designer Graphic Signs, DB Series, are access signs designed to provide alternative reading formats of sign messages for Braille readers. Sign messages and graphics indicate the international access symbol, restrooms, accessible restrooms, no smoking, left/right and up/down directional arrows, and volume control and text telephones, fire extinguisher, directions in the event of fire, and exit. The signs feature grade 2 braille, raised letters, and white on black graphics. Mad

Braille Car Plate (C100138, C125125, C138138, & C163125R)

The Braille Car Plate, movels C100138, C125125, C138138 and C163125R, is a braille elevator button label designed for use by individuals who are blind or have low vision. Made of acrylic, this square or rectangular plate displays a floor number, a letter comination such as PH (penthouse), or a word such as "Lobby" in large characters with the braille equivalent just below the text. DIMENSIONS (HxW): 1.375 x 1 inch (model C100138), 1.25 x 1.25 inches (C125125), 1.375 x 1.375 inches (C138138), or

Braille Car Plate (Model Crsnt145125)

The Braille Car Plate, model CRSNT145125, is a braille elevator button plate designed for use by individuals who are blind or have low vision. Made of acrylic, this plate has one side that is crescent-shaped so it fits around the side of an elevator buttons that is 1.5 inches in diameter. Each plate displays a floor number or letter combinations such as PH (penthouse) in large characters with the braille equivalent of the label just below. COLOR: Available in a variety of color combinations.

Braille Car Plate (Models C125Rnd & C138Rnd)

The Braille Car Plate, models C125RND and C138RND, is a braille elevator button plate designed for use by individuals who are blind or have low vision. Made of acrylic, this circular plate displays a floor number or a letter comination such as PH (penthouse) in large characters with the braille equivalent just below the text. DIMENSIONS: Diameter is 1.25 inches (model C125RND) or 1.375 inches (C138RND). COLOR: Available in a variety of color combinations.

Braille Car Plate (Models Oval238138 & Oval175135)

The Braille Car Plate, models OVAL238138 and OVAL175135, is a braille elevator button label designed for use by individuals who are blind or have low vision. Made of acrylic, this oval plate displays a floor number, a letter combination such as PH (penthouse), or a word such as "Lobby" in large characters with the braille equivalent just beneath the text. DIMENSIONS (LxH): 2.375 x 1.125 inches (OVAL238138) or 1.75 x 1.375 inches (OVAL175135). COLOR: Available in a variety of color combinations.

Braille Jamb Plate (Models J500400, J400400, J350350, J325325, J300400, & J400Rnd)

The Braille Jamb Plate, models J500400, J400400, J350350, J325325, J300400 and J400RND, is a braille sign designed for use to indicate floor numbers for elevator passengers who are blind or have low vision. Each unit has a floor number or a designation such as PH (penthouse) in large print, together with the braille equivalent. The unit is placed in the elevator door jamb so that passengers can tell which floor they have reached before leaving the car. Made of acrylic, the unit comes in rectangu

Braille Room Number Signs

Braille Room Number Signs are tactile signs with Alpha/numeric printed letters and Braille designed to permanently designate assigned room numbers. The signs will fit up to 5 letters or numbers per sign. MOUNTING: Double faced tape. DIMENSIONS: 4 x 4 inches. COLOR: Brown, Black, Red, Blue, and Burgundy. Choice of white lettering on these colored backgrounds, or these colors on a white background.

Braille Signage For Atm's

Braille Signage for ATM's are braille overlays for automatic teller machine (ATM) controls designed to make ATM's accessible to individuals who are blind or have low vision. These overlays have both graphics and braille to indicate ATM functions. The overlays are made of heavy stainless steel to prevent corrosion and are applied to the ATM using strong adhesives to prevent vandalism. Overlays are available for the following ATM models: Diebold models 906, 910, 911, 1060 MDS, 1062, 1064, 1072, 10

Braille Signs

Braille Signs are designed for use by individuals who are blind or have low vision. These signs have pictorial symbols and/or lettering along with braille. They are made of thick, rigid plastic and have pressure-sensitive self-adhesive mounting pads. Messages and symbols include Men - Wheelchair Accessible; Women - Wheelchair Accessible; Men/Women & Wheelchair Accessible; Men/Women Restroom; Men/Women Restrooms; No Smoking; Wheelchair Accessible; Exit; Arrow (horizontal or up 45 degrees); Me

Braille Signs

Braille signs for elevators and room numbers. Stainless steel or bronze, braille and raised letter plates. Various stock sizes. Custom sizes and finishes available.

Braille Signs With Graphics

Braille Signs with Graphics are tactile access facility signs that include the English printed word and a graphic and the Braille corresponding to that word. The outline engraved signs feature English words in 5/8-inch high letters raised 1/32-inch, and Grade 2 Braille raised 1/32-inch from the sign. Sign messages include: Stairway, Men, Elevator, Escalator, Cafeteria, Telephone, Lobby, Rest Room, and Women. The signs are made of acrylic. MOUNTING: Double faced tape. DIMENSIONS: 8 x 8 inches. CO

Braille Strips

Braille Strips are adhesive-backed strips with Grade 2 Braille designed for retrofitting existing signs to comply with ADA regulations. Manufacturer will translate existing sign messages at no extra cost and supply the Braille version along with a paper copy so that the strips will be correctly applied to the corresponding sign. The messages come in a holder to be mounted on the sign. DIMENSIONS: Each Braille character is .25 x .50 inches. COLOR: Braille characters and holders are available in

Braillewise Signage System

---- PROTOTYPE --------- PURPOSE: To create a prototype of a Braille signage system to assist individuals who are blind or have low vision to navigate airline lavatories. Airplane lavatories can be challenging to navigate for any traveler, but for individuals who are blind or have low vision they can be especially difficult to navigate. Designers at Hong Kong Polytechnic University have developed an easy to use system that helps readers of Braille know where everything is once they enter the lav

Brandt Gooseneck (Model 41413)

Adjustable gooseneck lamp. Air cooled shade with center suspended inner reflector. Focuses light out front and convects heat out back. Adjusts from 34 inches to 59 inches.

Brass Tone Canopy Crib

The Round Brass Crib is a circle bed designed for use with infants with cognitive or severe physical disabilities. Designed to promote infant safety and provide an unrestricted view for the developing child, this brass crib offers easier child access to parents and eliminates the dangers of sharp corners found on standard cribs. The crib has clear brass rope spindles, drop-side access, and a fluted dome assembly and includes a high-density foam mattress. OPTIONS: Bedding and linens watterproof p

Braun Ra 300 Transit Ramp

The Braun RA300 Transit Ramp is a hydraulic bus ramp designed to provide wheelchair access for a low-floor bus. The ramp comes in a self-contained drop-in unit. When stored, the bi-fold ramp section folds onto itself and then back onto the base. When the ramp is extended, the first section is raised hydraulically and once it passes 90 degrees vertical, it is allowed to lower to its partially extended position using gravity; then the second section uses a similar procedure to reach it fully exten

Braun Ra400 Transit Ramp

The Braun RA400 Transit Ramp is a hydraulic bus ramp designed to provide wheelchair access for a low-floor bus. The ramp comes in a self-contained drop-in unit. When stored, the ramp section folds back onto the base. When the ramp is extended, it is raised hydraulically and once it passes 90 degrees vertical, it is allowed to lower to its fully extended position using gravity. It closes in a similar manner. It has a manual override in case of power loss or malfunction. No pre-assembly is require

Braun Ra400H Transit Ramp

The Braun RA400H Transit Ramp is a hydraulic bus ramp designed to provide wheelchair access for a low-floor bus. The ramp comes in a self-contained drop-in unit. When stored, the ramp section folds back onto the base. When the ramp is extended, it is raised hydraulically and once it passes 90 degrees vertical, it is allowed to lower to its fully extended position using gravity. It closes in a similar manner. It has a manual override in case of power loss or malfunction. No pre-assembly is requir

Bridge Medical Pivot Grip Telescoping Portable Grab Bar (Models Bc400M & Bc400L)

The Bridge Medical Pivot Grip Telescoping Portable Grab Bar is a wall grab bar designed for use by individuals with balance or mobility disabilities. Because the bar telescopes and the ends pivot and rotate, this bar offers a variety of installation options, including stretching across a corner, stretching across the inside of a bathtub, or stretching across unparallel surfaces. The bar pivots 180 degrees. The bar attaches with large suction cups which lock and release with levers. SIZES: Model

Bridge Medical Telescoping Portable Grab Bar (Model Bc400M)

The Telescoping Grip Portable Grab Bar is a portable bathtub or shower grab bar designed for use by individuals with balance or mobility disabilities. The telescoping grip allows the portable grab bar to lengthen and shorten based on the specific need of the user. It is constructed with rubber suction pads capable of holding over 200 pounds of pull force strength for a reliable hold. The telescoping grip is available in two sizes to accommodate most needs and no tools are required for installati

Bridge Threshold Ramp (Models Tr1, Tr1.5, Tr2, & Tr3)

The Bridge Threshold Ramp is designed to provide wheelchair or scooter access over single steps or doorways. The ramp is made from aluminum with a non-slip surface. OPTIONS: Light duty plate for creating a bridge between the ground and doorway threshold. DIMENSIONS (LxW): 8 x 36 (model TR1), 10 x 36 (model TR1.5), 14 x 36 (model TR2), or 18 x 36 inches (model TR3). Rise is 1 inch (model TR1), 1.5 inches (model TR1.5), 2 inches (model TR2), or 3 inches (model TR3). CAPACITY: 750 pounds.

Bridge-Medical Single Grip Portable Grab Bar (Model Bc-201)

The Bridge-Medical Single Grip Portable Grab Bar, model BC-201, is a bathtub or shower grab bar designed for use by individuals with balance or mobility disabilities. This portable grab bar has suction cups for attaching to a tub, shower, or other smooth, non-porous surfaces. The suction cups provide over 200 pounds of pull strength and will not damage surfaces. DIMENSIONS: 13 inches long. The suction cups are 4.5 inches in diameter. WEIGHT: 3 pounds.

Bruno Elan (Model Sre-3000)

The Bruno Elan, model SRE-3000, is a straight rail interior seat lift designed for use by individuals with balance, lower extremity, mobility and cognitive disabilities. The Elan has a 0-, 67- and 90-degree locking swivel seat at the top and the bottom of the stairway. The height-adjustable, folding seat is equipped with an adjustable footplate with a safety sensor, flip-up arm rests, and a seatbelt. It has an infra-red wireless control with momentary switching requiring a user to hold button co

Bruno Electra-Ride Elite

The Bruno Electra-Ride Elite is a straight rail interior seat lift designed for use by individuals with mobility disabilities and cognitive disabilities. The Electra-Ride has a 45- and 90-degree locking swivel seat at the top and the bottom of the stairway. The height-adjustable seat is equipped with an adjustable footplate with a safety sensor, flip up arm rests, and a retractable seatbelt. This lift can be installed on either side of the stairway, to within five inches of the wall. POWER: Us

Bruno Electra-Ride Ii (Model Sre-1550)

The Bruno Electra-Ride II is a straight rail interior seat lift designed for individuals with mobility disabilities and cognitive disabilities. The Electra-Ride II can be installed on either side of the stairway. There is a final end stop bumper at each end of rail. Adjustable speed control up to 32 feet per minute; actual loaded top speed is 28 feet per minute. SEAT: The seat width adjusts from 16 to 20 inches between the armrests, and the seat depth is 14 inches. The seat rotates, locking at

Bruno Electra-Ride Iii (Model Cre-2110)

The Bruno Electra-Ride III, model CRE-2110, is a custom rail interior seat lift designed for individuals with mobility disabilities and cognitive disabilities. The stairlift rail can be installed as close as 7 inches from the wall. The unit anchors to the steps, not the wall. Tight radius inside turns fit typical bi-level houses. The tight turn and narrow rail will keep the majority of the staircase free of obstruction. The height-adjustable seat swivels and locks at 45 degrees (bottom), 0 degre

Bruno Electra-Ride Lt (Model Sre-2700)

The Bruno Electra-Ride LT, model SRE-2700, is a straight rail interior seat lift designed for use by individuals with mobility disabilities and cognitive disabilities. The LT has a rack and pinion drive system will sense and automatically stop when obstacles are encountered. The seat and arms of the carriage flip up out of the way when the unit is not in use. The swivel seat locks for getting on or off. The rocker switch control is conveniently located at the end of the arm rest. The two wireles

Btx Tubular Motor (Tumo) Xcel Drapery System

The BTX Tubular Motor (Tumo) Xcel Drapery System is a powered drapery control system designed for use by individuals with severe physical or neurological disabilities. This plug-and-play automation system has a built-in radio receiver, an electronic controller, and a direct current (DC) motor capable of pulling up to 60 pounds of drapery fabric (120 pounds for tandem drive). The integrated radio allows for up to six systems or six groups of systems to be controlled by one remote. The electronic

Buckingham Showereasy

The Buckingham Showereasy is a shower aid designed for use by individuals with upper extremity and severe physical disabilities. The showereasy is a shower arm device that complements the use of bath and shower boards, allowing hands-free showering and washing by the user. In use, the shower arm can be moved into three different directions, either directly upright or with a gentle push it can be moved to the left or right until it clicks into a particular position.

Bumblebee Pedestrian Buttons (Models D-001-100, D-002-100, D-003-100, D-004-100, 453-1690, & 453-0400)

BumbleBee Pedestrian Buttons are pedestrian signal control switches designed for use as crosswalk control switches by pedestrians with physical disabilities or low vision. These switches are large and easy to push, with high visual contrast between the button and its mount. These switches operate through magnetic actuation, and have no sensitive electronics, no mechanical parts to wear out, and no exposed parts to ice up. They are self-powered and do not depend on controller input or other devic

Bumper Threshold (Model 477S)

The Bumper Threshold, model 477S, is a threshold ramp designed for use in emergency exits to allow wheelchair users to exit a room while not allowing entrance. The threshold is made of aluminum with a vinyl, neoprene, EDPM, TPE, silicone or pile insert, and comes with 10 1.5-inch wood screws. OPTIONS: Sure-Step non-slip abrasive coating; other screw types or anchors. DIMENSIONS (HxW): 0.5 x 5 inches. COLOR: Mill finish aluminum, dark bronze anodized aluminum, or gold anodized aluminum.

Bunk Bed Feeder Mount

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted feeder mount for a Kangaroo Pump feeder to a bunk bed for a child with Edwards Syndrome. There was no room for the feeder to be placed at the head of the bed; therefore, it was suggested that the child’s sleeping position be reversed. Despite the change in sleeping position the feeder could not be fixed directly onto the rails as they were too close together. A new bracket was added which holds the feeder just out from the

Bunk Bed Ladder Modification

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a customized bunk bed ladder for a child with Edwards Syndrome. To protect the child from injury the bottom three rungs of the bunk bed ladder needed to be screened off by putting mesh on the inside. However, this would make the child’s sister unable to use the ladder rungs safely to climb into the top bunk. A new rung unit was created which completely covers the bottom three existing rungs. The new rung unit has mesh fabric on the inside,

Bunk Bed Rails

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create customized bunk bed rails for a child with Edwards Syndrome. A side rail for the bunk was created using a steel tube frame padded with foam and covered in strong white mesh fabric and held in place by canoe clips. The rail is mounted on two brackets which fit over the frame of the bunk base, and can be easily lifted in and out of the bed. This adaptation is strong enough to avoid damage to the frame and safe for the child should she bang ag

Busy Fingers™ Gel Fidget

Busy Fingers™ Gel Fidget is a fidget toy designed for children with autism, with sensory integration disorder, or any child who has trouble paying attention or sitting still. Use when stressed, bored or seeking sensory input. Has the added benefit of it helping to boost their concentration and focus as well as fine motor skills and fine motor strengthening. Can be kept in a backpack or parent’s bag and used at home, school, clinic, or while riding in a car. For ages 3 and up. DIMENSIONS: 5.5 inc

Butler Inclined Platform Wheelchair Lift

The Butler Inclined Platform Wheelchair Lift is an interior wheelchair lift designed for use to enable wheelchair users to traverse stairways. The lift has two rails that mount on the landings at the top and bottom of the stairs with no modifications needed to walls. The power unit can be located almost anywhere at the bottom of the stairs including through an adjoining wall. The lift has three directional switches on the platform, at the upper landing, and at the bottom landing. All switches ar

Butler Residential Dumbwaiter (Models 1000, 2000, 3000, & 4000)

The Butler Residential Dumbwaiter is a dumb waiter designed for use by individuals with mobility disabilities or spinal cord injury. The motor for this modular electric dumbwaiter is located at the top of its shaft. The model 1000 (ultralite) car is made of powder-coated heavy gauge steel and comes with a vertical-rising vinyl curtain. Standard dumbwaiter cars are made of cabinet-grade birch ply with steel reinforcements front and rear and a scratch- and stain-resistant bottom liner. Three types

Butler Vertical Wheelchair Lift

The Butler Vertical Platform Lift (VPL) is an interior or exterior wheelchair lift designed for use by individuals with mobility disabilities or spinal cord injury. The lift has momentary (constant pressure) control switches on the platform, at the upper landing, and at the bottom landing. Outdoor installations include an enclosure. OPTIONS: Wall mounted controls; key-operated controls; automatically folding end ramp and guard that locks in place during operation. POWER: Uses standard residentia

Butt Ramp

The Butt Ramp is a portable threshold ramp designed for use by people who have lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. It is intended to help a person to get over thresholds or to get on or off of a curb. This straight aluminum ramp has a low rise and is available with wheel guards on both sides or on the left or right side only. The high end of the ramp butts up against the wall under the threshold, and it is raised by legs. The lower end

Cable-Waiter

The Cable-Waiter is a dumbwaiter designed for use by individuals with mobility disabilities. Available with wood, steel, or stainless steel cars, this unit carries cargo such as groceries, laundry, or household supplies up to 50 feet with up to six stops. The unit has momentary contact call/send push button controls at each landing and travels at 30 feet per minute. This dumb waiter is available with a carrying capacity of 50 or 100 pounds. A roll top gate and shelf are standard on the wood car

Cambrian Elevator

The Cambrian Elevator is a home elevator designed for use by individuals with mobility disabilities. This residential elevator features automatic sliding doors on the cab and on each landing; infrared safety light curtain; digital position indicators in the elevator and over each landing; and custom fixtures to coordinate with interior decoration. OPTIONS: Solid wood paneling in oak, maple, or cherry; mirrors or glass cab walls; touch-screen controls; and television or music in the cab. COLOR: C

Cambridge Elevating Deck Lift

The Cambridge Elevating Deck Lift is an outdoor home elevator designed for use by individuals with mobility, lower extremity, or walking disabilities or spinal cord injury. This compact unit can lift an individual using a wheelchair or walker up to six feet to the level of a porch or doorway. The unit is engineered to endure harsh weather conditions, with weather-protected controls and powder coated panels to resist corrosion. A manual lowering function is included. Custom cab configurations are

Cambridge Elevating Limited-Use / Limited-Application Elevator

The Cambridge Elevating Limited-Use/Limited-Application (LU/LA) Elevator is an elevator designed to provide wheelchair access in schools, libraries, low rise commercial buildings, churches, and multi-family housing. This unit combines the functionality of a commercial elevator with the style options of a residential elevator, including various finishes and door systems to allow the elevator to blend into the surrounding decor. Features include a hydraulic drive system and controls; fire-rated sl

Campbell Ada Compliant Pedestrian Push Buttons (Models 200, 400, 500, 800, 900, 4 Evr 120, 1371-412, & 4960-412)

Campbell ADA Compliant Pedestrian Push Buttons are audible pedestrian control switches designed for use by individuals who are blind or have low vision. Controls include a large round button in a round or rectangular mounting plate of stainless steel, aluminum, or PVC plastic. An audible tone and LED visual signal are momentarily activated when the button is pressed. Available switches include pressure sensitive solid state (model 4 EVR 120), typical movement solid state (model 700, 800, and 900

Canopy Enclosed Bed

The Canopy Enclosed Bed is an enclosed bed designed for use by children with autism, behavior disorders or sleep disorders such as sleepwalking that cause wandering. The bed's stainless steel frame includes two folding bed rails and four poles at the corners that support an upper section on which a full canopy is mounted. The frame and bed rails are padded. The mesh panels unzip on all four sides for complete access to the child. Locking zippers can be positioned where needed for the use of IV l

Careassist Es Bed

The CareAssist ES Bed is a motorized bed designed for use by individuals with severe physical disabilities. This adjustable electric hospital bed includes siderails, dual-locking brake casters with audible alarm, and integrated bed extenders for adding length to the bed. The bed moves in and out of a chair position for dining with a one-button control. Large button caregiver controls are located in one central location at the point-of-care, along with an angle of bed indicator and customizable a

Carelift Wheelchair Lift

The Carelift Wheelchair Lift is a commercial elevator designed for use by individuals with walking, mobility or lower extremity disabilities, spinal cord injury or arthritis and others who use wheelchairs. The Carelift is a heavy-duty, fully enclosed elevator with a manual or automatic swing door. It can be fitted into a new or existing building with up to 6 stories. The elevator requires an 8-inch pit and 96 inches of overhead space. The interior of the cab has Melamine wall panels with stainle

Carex Easy-Up Bed Rail

The Carex Easy-Up Bed Rail is a side rail designed for use by individuals with mobility disabilities. Features include a two-in-one design that provides the security of a bed safety rail with the convenience of a padded bed support bar and a single-step release that can be easily raised and lowered by a caregiver. Designed for home use with a powder-coated compact frame, this bed rail fits any standard sized bed and can be assembled without the use of tools. DIMENSIONS (HxDxW): 22 x 1.50 x 41 in

Carex Enablers Doorknob Gripper (Model En19Crd)

The Enablers Doorknob Gripper, model EN19CRD, is a door knob accessory designed to assist individuals with limited hand strength or geasping ability in turning standard round door knobs. This glow-in-the-dark gripper slips over the existing knob to provide a slip-free surface. DIMENSIONS: 1.5 inches long x 2.13 inches in diameter.

Carex Enablers Jar Opener & Closer (Model En17Crd)

The Carex Enablers Jar Opener & Closer, model EN17CRD, is a jar opener and tap turner designed for use by individuals with limited manual dexterity. The large round disk fits over jar lids or taps, while the pinwheel design in the surface helps secure the user's grip and concentrate hand strength while turning. DIMENSIONS (HxDxW): 4.75 x 1.25 x 4.75 inches.

Carex Enablers Lamp Switch Turner (Model En23Crd)

The Enablers Lamp Switch Turner, model EN23CRD, is a lamp switch extension lever designed for use by individuals with limited manual dexterity or arthritis. This large triangular extender slips over the existing twist-type lamp switch to provide a larger gripping area. No electrical connections are required. DIMENSIONS (HxDxW): 1.5 x 0.81 x 1.5 inches.

Carex Ultra Grip Pivot Suction Grab Bar

The Carex Ultra Grip Pivot Suction Grab Bar is designed to assist individuals in the tub, shower, and bathroom to prevent slips and falls, and offer support. These grab bars are available in straight lengths and 22 different custom designs. The unique pivoting center design allows for installation in whatever position it is needed and the handy visual indicators on the suction cups ensure you're grabbing onto a solid handle. Handy and easy to use, this suction cup grab bar delivers ideal balance

Carex White Wall Grab Bars

Carex White Wall Grab Bars are wall grab bars designed for individuals with balance disablities. These grab bars are made of durable heavy duty steel tubing with a powder coat finish. DIMENSIONS: The bars range are available in 12, 16, 18, or 24 inches long with a depth of 1.25 inches and height of 1.5 inches. Each bar requires an additional 2.5 inches in length and 2.5 inches in height. COLOR: White.

Carlite Series Ramp

The Carlite Series Ramp is a portable ramp designed to provide wheelchair access for individuals with lower extremity or mobility disabilities or spinal cord injury. Made from aluminum, the ramp has an anti-slip tread with safety curbs on the sides. DIMENSIONS: Standard lengths are 1 to 6 feet and standard widths are 30 to 36 inches. Custom sizes are available.

Carlstadt Rail System

The Carlstadt Rail System consists of aluminum handrails designed to be assembled on site. DIMENSIONS: 1.25 to 1.5 inch wide rails with 1.5 inch wall clearance; available in 20 foot lengths only. OPTIONS: All accessories available.

Carpet Threshold (Models 503S, 504S, 505S, 506S, & 508S)

The Carpet Threshold, models 503S, 504S, 505S, 506S and 508S, is a threshold ramp designed for use to allow wheelchair users to move between carpeted areas. The threshold comes with 10 1.5-inch wood screws. OPTIONS: Sure-Step non-slip abrasive coating; other screw types or anchors. DIMENSIONS (HxW): 0.875 x 2 inches (model 503S); 0.5 x 2.13 inches (model 504S); 0.45 x 0.81 inches (model 505S); 0.81 x 4 inches (model 506S); 0.69 x 1.81 inches (model 508S). COLOR: Mill finish aluminum, dark bronze

Cast In Place Replaceable Tactile Warning Surface Tile

The Cast in Place Replaceable Tactile Warning Surface Tile is a detectable warning surface designed to provide warnings of streets and other potentially dangerous areas for individuals who are blind or have low vision. This is a detectable warning surface with truncated domes for use in new curb ramps or new construction. It is installed by being pressed into place in freshly poured concrete. The unit may be replaced by removing the bolts and inserting a new interchangeable unit in the existing

Cast-Dwd

CAST-DWD is a detectable warning surface designed for use by individuals who are blind or have low vision. The CAST-DWD panels are made from cast iron, with truncated domes to provide tactile warnings to visually impaired pedestrians. The panels can withstand rigorous conditions such as snow plows, street cleaning machines, and vehicular traffic. Panels are installed directly into wet concrete and held in the concrete by a locking device. The panels have a static coefficient or friction (slip re

Castintact 3 Tactile Warning Panel

The CASTinTACT 3 Tactile Warning Panel is a detectable warning surface designed for use by individuals who are blind or have low vision. This cementitious concrete panel is for exterior use at the bottom of curb ramps and other locations where tactile warnings are needed, such as depressed corners, raised crosswalks, raised intersections, borders of medians and islands, the edge of transit platforms, and sidewalks where railroad tracks cross. Panels can be used for both new construction and retr

Cedar-Black Ada Picnic Table (Model 07Ey1148)

The Cedar-Black ADA Picnic Table, model 07EY1148, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. Made of recycled plastic, this long table has space for a wheelchair at each end. The table top and seats are slightly grained for a cedar wood appearance. DIMENSIONS (HxLxW): The tabletop is 31 x 97.5 x 29 inches. The seats are 20 x 72 x 9.5 inches. WEIGHT: 358 pounds. COLORS: The top and seat are cedar-colored and the frame is black. D

Centurion Stainless Steel Grab Bars

Stainless steel grab bars. Diameters: 1, 1 1/4, 1 1/3 inches. 1 1/2 inch hand to wall clearance. Oval or round flanges, concealed or exposed mountings. Tested to withstand 1000 pounds of pull when properly installed. Straight: 12, 16, 18, 24, 30, 32, 36, 42, 48 inches.

Ceramic Floor Tiles

Ceramic Floor Tiles are non slip floor tiles designed to meet ADA standards to prevent slipping and falls from occurring. A variety of floor styles and textures are available, all having a coefficient of friction of at least 0.6 when wet. Naturetones are highly glazed floor tiles with textured semi-matte glaze and a cushioned edge. The Porcelain Pavers are unpolished larger style tiles with a square edge. Quarry Tile is the largest category offering tiles that have raised patterns and abrasive g

Chair Raisers

CUSTOM ADAPTATION PURPOSE: To provide a child with multiple disabilities with access to an elevated cut-out table. The cruciform-shaped risers were made of 9-millimeter plywood and have vertical housings at each corner. The housings accommodate the full depth of the chair legs, but pine inserts were also made which can be dropped into the housing to further elevate the chair for taller children. DIMENSIONS: The vertical housings are 180 millimeters high. TITLE: Supporting Early Intervention. JO

Chair Sox

The Chair Sox are furniture tips designed for use by individuals with cognitive or emotional disabilities and balance disabilities. These non-slip furniture tips are designed to eliminate distracting noise of shuffling chairs and desks in a classroom setting. These tips come pre-cut and ready to assemble by slipping them over the feet of chairs or desks. The tips fit all standard classroom-style chair and desk legs. They can also be used as walker tips.

Chair With Double Seat

CUSTOM ADAPTATION PURPOSE: To enable an individual with neurological disabilities to sit upright. Because of severe pain, the only comfortable position for the individual is with his legs completely curled up. A chair with essentially with a two-layer seat was developed. The upper section supports the user's buttocks and the lower section supports the legs in a curled position. The seat layers are mounted on a base made of one-inch square tubular steel. Castors at one end allow the chair to be

Cherry / Oak / Walnut Ada Compliant Interior Threshold

The Cherry / Oak / Walnut ADA Compliant Interior Threshold is a threshold ramp designed to provide access for wheelchair users and others with mobility, lower extremity, or walking disabilities. The ramp slopes up both sides gradually, to allow wheelchair users to roll over, and also to provide less obstruction for individuals with walking disabilities. This wooden ramp is available in cherry, oak, or walnut. DIMENSIONS (HxLxW): 0.5 x (24, 36, 48, 60, or 96) x (3.5, 4.5, or 6.5) inches.

Child Swing Platform

The Child Swing Platform is a wheelchair swing designed to enable children and adults who use wheelchairs to swing without leaving the wheelchair. Suitable for children aged five to fourteen, the swing features a non-skid aluminum platform, an entry ramp with locking chains that keep the ramp in place during entry and exit and pull the ramp up to secure the chair in position, plastic-covered chains, aluminum or galvinized hardware, and continuous aluminum hinges. This swing attaches to the exist

Child's Standing Frame For Shower

CUSTOM ADAPTATIONPURPOSE: To enable a child with spina bifida to stand in the shower. The standing frame is square-shaped with one end open. The child supports herself on the sides or the closed end of the frame. The frame is constructed of one-inch PVC tubing with rubber suction cups on the bottom of each of the four legs. There is additional bracing across the top of the closed side. DIMENSIONS: The frame's approximate height is 65 centimeters (cm). TITLE: Sara Walks! JOURNAL: TAD Journal. REF

Chromalux Full Spectrum Incandescent Light Bulbs

Chromalux Full Spectrum Incandescent Light Bulbs are high intensity light bulbs designed for use by individuals with low vision or seasonal affective disorder (SAD). The bulbs are made of glass that contains neodymium, a rare earth element that absorbs yellow and other dulling components of the spectrum, allowing violet, blue, green, and red components to be strengthened without producing an imbalance of one color over another. A heavy duty filament provides long life (5000 hours average). They

Chrome Plated Flanged Grab Rail (Model 118)

The Non-Peel Flanged Grab Rail, model 117, is a grab bar designed for use by individuals with balance or mobility disabilities. This grab bar has flanged ends with mounting holes. DIMENSIONS: Available in 12, 15,18, 24, or 28 inches long with a 2.75-inch hand clearance. The rail is 1-inch in diameter. COLOR: Chrome.

Church Sanctuary Wheelchair Lift

The Church Sanctuary Wheelchair Lift is an interior wheelchair lift designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. It is intended to provide discrete access to the raised sanctuary of a church. The lift has momentary (constant pressure) control switches on the platform, at the upper landing, and at the bottom landing. It features a twin-rail, chain and sprocket design. The quiet electric motor unit includes a standard battery backup. In the e

Circular Fiber Optic Shower

The Circular Fiber Optic Shower is designed to give the user the impression of being in a tunnel with over 150 strands of fiber optics that hang from the ceiling to create a special spot for people of all ages, who benefit from sensory integration. Big enough to accommodate a wheelchair or standing frame. The safe acrylic mirror on the ceiling gives the impression that the fiber optic strands continue ‘into’ the ceiling. The product can be either relaxing or stimulating depending on the model ch

Cirqlation Elite Foot And Calf Massager (Model Ht-1360)

The CirQlation Elite Foot and Calf Massager, model HT-1360, is a foot and calf massager designed for use by individuals with circulatory and lower extremity disabilities. This massager is covered in leather-like upholstery and has two U-shaped slots into which the user places the foot and lower leg. It is mounted on a metal frame so it can rotate 180 degrees. It massages the calves in an upward, rolling or wave-like fashion and vibration can be added. The user can select from three auto-massage

City Round Pedestal Wheelchair Accessible Picnic Table

The City Round Pedestal Wheelchair Accessible Picnic Table is designed for use by individuals who use wheelchairs. This round picnic table has three seats attached to the pedestal which can accommodate six adults. The table also has an opening to accommodate a wheelchair. The table top is thermoplastic coated and sits on a powder-coated steel pedestal. The table also has an umbrella hole. DIMENSIONS: Table is 30 inches high and the table top is 46 inches in diameter. The seats are (HxW) 18.25 x

City Square Picnic Table - Wheelchair Accessible (Model Pup358H-V)

The City Square Picnic Table - Wheelchair Accessible, model PUP358H-V, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This table has three attached seats with space for a wheelchair on the fourth side. It has a galvanized, powder-coated steel frame, with a high-gloss plastic coated table top and seats, and is portable/surface mounted. The table top has an umbrella hole. DIMENSIONS (HxLxW): The table top is 30 x 56 x 46 inches. The s

City Wheelchair Accessible Picnic Table - One End (Model Pup238H-V8S)

The City Wheelchair Accessible Picnic Table - One End, model PUP238H-V8S, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This long table has seats on two sides and space for a wheelchair on one end. It is made from powder-coated galvanized steel, with plastic coating on the table top and seats, and has a portable/surface mount. DIMENSIONS (HxLxW): The table top is 30.5 x 96 x 30 inches and the seats are 18.75 x 72 x 12 inches. WEIGH

City Wheelchair Accessible Picnic Table - Two End (Model Pup238H-V8)

The City Wheelchair Accessible Picnic Table - Two End, model PUP238H-V8, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This long, rectangular table has an extended table top at both ends to allow access for two wheelchairs. The portable, surface- mounted table has two benches and is made from thermoplastic-coated steel with a powder-coated galvanized steel frame. DIMENSIONS (HxLxW): The table top is 30.5 x 96 x 30 inches. THe seats

Clapper Plus With Remote Control

The Clapper Plus with Remote Control is a sound activated switch and radio remote control for lights or appliances designed for use by individuals with mobility disabilities. This unit allows the user to turn one or two appliances on or off by clapping hands or by pressing a button on a remote control. The remote control operates at a distance up to 25 feet away, and can operate through walls from another room or from outside. Operable appliances include lamps, Christmas tree lights, fans, and r

Classic Foot Flush

Foot Flush is a foot-operated toilet flushing aid designed for use by individuals with mobility, upper extremity, or neurological disabilities or arthritis. This device fits most flapper-style tank toilets and does not interfere with the operation of the standard flush handle. Once installed, the device sits on the floor and enables the toilet to be flushed simply by stepping on the unit.

Classroom Light Filters

The Classroom Light Filters are designed to reduce sensory stimulation in the classroom. The harsh glare and flickers from fluorescent classroom lighting can cause eyestrain, headaches, and anxiety. Calm and soothe students by decreasing glare. These panels can also be used to reduce light in sensory rooms. Fabric panels fit over standard ceiling fixtures with sturdy, sewn-in magnets. Each set includes four heat-resistant panels.

Classroom Positioner Chair (Models Cpc25, Cpc29, & Cpc33)

The Classroom Positioner Chair is a youth positioning chair designed for use by children with mobility or neurological disabilities. This wooden chair features independent adjustment of the height, depth, and angle of the seat back and footrrest. The contoured seat cushion can be set at up to 20 degrees anterior tilt, as well as level or at a posterior tilt. The chair comes standard with a contoured seat cushion, seat belt, back pad, lateral supports, and locking casters. OPTIONS: Foot surface w

Classroom Positioner Desk / Stander (Models Ds1 & Ds2)

The Classroom Positioner Desk/Stander is a height-adjustable classroom desk and standing table designed for use by children with mobility or neurological disabilities. This desk can be used with the Classroom Positioner Chair (see separate entry) or independently. Features include height and angle adjustability, a multi-adjustable desktop, adjustable knee block, and lateral pelvic pads for standing positions. The desk also included latches to secure it to the Classroom Positioner Chair. The desk

Clear Corner Guards

The Clear Corner Guards are designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. The protectors provide wall corner protection for light impact areas. These protectors offer the least amount of design interruption by allowing wall color or pattern to show through. They come with pre-drilled holes and self-tapping screws. Clear adhesive tape is also available. Available wing angles are 90 and 135 degrees. DIMENSIONS: Wing sizes are available in 0.75,

Clip-On Booklight

The Clip-On Booklight is a low vision light designed for use by individuals with low vision. This clip-on light can also be used as a freestanding light. The extra long clip attaches to any size book and most table tops. This light has an ultra bright LED that never needs replacing. POWER: Uses 3 AAA batteries (not included). COLORS: Blue and silver.

Closet Adaptations

DO IT YOURSELF ENTRYPURPOSE: To make an existing closet accessible to seniors and individuals with arthritis, balance disabilities, or mobility disabilities. This illustrated article, included in a chapter entitled "Bedroom & Getting Dressed," discusses various inexpensive modifications. Included are lowering the clothes rod, adding shelves at usable heights, storing items on the floor in baskets, and replacing the closet door with a curtain or lighter weight folding door. AUTHOR: Greenstein

Closet Carousel

Clothing storage/retrieval system operated by a push button control brings clothes to location of choice within the closet or closet doorway. Motor, which is bidirectional, automatically stops in event of interface; reset button restarts motor once obstruction is removed. Adjustable hanging rods, baskets and shoe racks provide total flexibilty within easy-to-organize storage sections. Operates on standard household current. Available in ten sizes. Minimum closet dimensions needed: 4 feet, 6 inch

Collapsible Dam (Models Cwr-42, Cwr-54, Cwr-66 & Cwr-96)

The Collapsible Dam, models CWR-42, CWR-54, CWR-66 and CWR-96, is a water dam for a shower designed to control water spillage from all types of barrier-free, curbless showers. This device collapses easily by foot or wheelchair pressure and features a strong self-adhesive, water-resistant tape bottom. SIZES: 42 inches (for 36-inch opening); 54 inches (for 48-inch opening); 66 inches (for 60-inch opening); 96 inches (for 90-inch opening). OPTIONS: End caps for showers with radius end walls are ava

Combination Aid Rail (Model 1632)

The Combination Aid Rail ##1632 is a stainless steel wall mounted grab bar for use in bathtubs or showers. The support consists of an L-shaped bar that mounts in two places on the vertical side, and one on the horizontal side. The grab bar is available in exposed mounting styles and 4 concealed mounting styles. The rail comes in right or left hand configurations. DIMENSIONS: 16 x 32 inches with 1, 1.25, or 1.5 inch diameter tubing. Safety wall clearance is 1.5 inches. FINISH: Brushed Satin is st

Combination Sink And Shower Unit.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: To make an accessible bathroom facility for a quadriplegic in an affordable manner with a simple efficient low cost facility which combines the sink and shower in a single unit. Cabinet is made of lightweight sink and drainage system that can easily be removed to free the entire shower area for bathing. Shower is accessible on a roll-in track. Rolling pulley lift is fitted to a 10 foot 4 inches wide steel I beam that attaches to ceiling. SKILLS REQUIRE

Comfy Sack

The Comfy Sack is a soft chair designed for use by children or adults with autism, Alzheimer's disease, or cognitive or emotional disabilities. Designed to provide comfort, these chairs are similar in design to bean bag chairs, but are made of polyurethane foam with memory properties. These chairs have come with an internal liner that allows the cover to be taken off and machine washed. The cover is available in a choice of microsuede or twill. DIMENSIONS: Available in 3.5 feet in diameter, 5 fe

Comfylap

The Comfylap is a bookholder, bed tray, and laptop computer table designed for use by individuals with mobility, neurological, or upper extremity disabilities. This lightweight, rectangular table is supported two legs, each of which has two locking joints in addition to the locking joint that connects the table to the leg. Each joint has an angle lock button. All of the joints can be adjusted so that the table can be used at a variety of heights and angles to provide a surface to serve as a lapt

Commander Automatic Door Opener

The Commander Automatic Door Opener is a powered door opener and closer designed for use by individuals with physical disabilities and wheelchair users. This unit can be used in residential or commercial settings to convert new or existing swinging doors to automatic operation without modifying existing door frames. It works with both in-swing and out-swing door configurations. It can also be used on wheelchair lifts and elevators. The opening speed and hold open time are both adjustable. A cons

Commercial Ada Concrete Table (Model Sw6012)

The Commercial ADA Concrete Table, model SW6012, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This round table has seats on three sides with space for a wheelchair on the fourth side. There is an umbrella hole in the center. The table is made of steel-reinforced precast concrete with a smooth polish finish and Natura Stone seats and frames. DIMENSIONS (HxD): The table is 31 x 66 inches in diameter. The table top is 38 inches in di

Commercial Double Bowl Kitchen Sink (Model 22129)

The Commercial Double Bowl Kitchen Sink, model 22129, is an accessible sink designed for use by individuals who use wheelchairs. Each bowl has a recessed drain opening located at the rear to allow more space underneath for a wheelchair user. Made of stainless steel with a polished satin finish, the sink has four fixture mounting holes and an undercoating that deadens sound and inhibits condensation. Mounting hardware is included. DIMENSIONS (HxDxW): Each bowl is 5.5 x 16 x 14 inches; overall cou

Commercial Gentleman Public Access Door Operator

The Commercial Gentleman Public Access Door Operator is a powered door operator kit designed for use in public settings to provide barrier free access for people with mobility issues. The operator allows manual use of the door by those not requiring the automatic opener. This operator can be totally pneumatic in operation or interfaced with low voltage (wired or wireless) electronics for total public access. Standard Kit Includes - Commercial Opener & mounting hardware, 4 1/2" square poly bo

Commercial Single Bowl Kitchen Sink (Models 22130 & 22131)

The Commercial Single Bowl Kitchen Sink is an accessible sink designed for use by individuals who use wheelchairs. The bowl has a recessed drain opening located at the left rear (model 22130) or right rear (model 22131) to allow more space underneath for a wheelchair user. Made of stainless steel with a polished satin finish, the sink has four fixture mounting holes and an undercoating that deadens sound and inhibits condensation. Mounting hardware is included. DIMENSIONS (HxDxW): Bowl is 5.5 x

Compact-Wide Soaker Walk In Bathtub

The Compact-Wide Soaker Walk In Bathtub is an accessible bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. This model replaces and fits into the space of an existing shower stall, standard bathtub, and most small or hard- to-fit areas. Its large outward opening door can swing open up to 180 degrees, with a required door clearance of 23 inches, and is available left- or right-mounted. The tub has a low threshold; a contoured seat with built-in arm

Computer Desk Modifications

CUSTOM ADAPTATION PURPOSE: To enable an individual with spinal cord injury to use his computer from his wheelchair. A purchased self-assembly desk was modified to accommodate a powered wheelchair. Two 100-millimeter-high panels were added to the bottom sides of the desk to increase the height and enable the user to get his feet under the desk. A plywood panel was added across the back to strengthen it and the shelf below the desk top was removed. A U-shaped notch was cut in the keyboard surface

Computer Desk Modifications

CUSTOM ADAPTATION PURPOSE: To enable an individual with spinal cord injury to use a computer desk. With the purchase of a new wheelchair, the individual found that his existing desk was too high for comfortable use. Since the desk legs were mounted on square wooden blocks,the optimal height was determined and 50 millimeters was cut off the bottom of each block. TITLE: Helpful Adaptations. JOURNAL: TAD Journal. REF: Volume 26, Number 4, January 2007: p. 18. PAGES: 2 (including cover).

Concord Ada Picnic Table (Model 07Eg1030)

The Concord ADA Picnic Table, model 07EG1030, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This table has seats on three sides and space for a wheelchair on one side. The table top is hexagon-shaped, with an umbrella hole in the center. The table is made from 100 percent recycled plastic. DIMENSIONS (WxH): The table top is 41 x 31.25 inches. Seats are 9.25 x 19 inches. The umbrella hole is 2 inches in diameter. WEIGHT: 330 pounds.

Concrete Deck Ramp System

The Concrete Deck Ramp System is a modular ramp system designed to provide wheelchair and scooter access in modular structures such as classrooms, offices, churches, and public buildings. This tough and durable ramp system looks and feels permanent, but is actually modular and can be relocated with a portable structure. The ramp has a heavy-duty steel tube frame with a concrete panel surface, with custom sizes and dimensions to fit the location. The ramp can withstand water, freezing and thawing

Cone Bed & Chair Raiser (Model Ha-4507)

Cone Bed and Chair Raisers, model HA-4507, are leg extenders designed for use by individuals with arthritis, back pain, or mobility or lower extremity disabilities. These molded plastic cone-shaped leg extenders raise the normal bed or chair height and are designed to be steady when in use. DIMENSIONS: The height is raised by 150 millimetes.

Connectorail System

The Connectorail System is a handrail system for portable ramps. The system consists of non-welded, pre-engineered pipe railing designed to be assembled on site. A full range of stock components for use on handicapped access ramps is available. DIMENSIONS: 1.25 to 1.5 inches IPS, with brackets to provide 1.5 inch wall clearance. Available in 20 foot lengths only.

Conni Waterproof Bed Protector

This Conni waterproof bed protector is designed for the elderly and/or any individual who has incontinence, difficulty walking to the restroom or who has a history of wetting the bed. The waterproof bed protector is absorbent and breathable to allow for a restful night's sleep.

Conserver Dual Flush Het (Model 4213)

The Conserver Dual Flush HET, model 4213, is a tall toilet designed for use by individuals with mobility disabilities. This high, elongated toilet has a water consumption of 1.0 or 1.6 gallons per flush (gpf). It is made of stain-resistant vitreous china and has a brushed metal tank lever. The Conserver features a sanitary bar on the bowl for easy cleaning and a 2-inch glazed trapway. The seat and cover are not included. Installation instructions are included. DIMENSIONS (HxDxW): 30 x 29.875 x 1

Contour Cloud Memory Foam Mattress Topper

The Contour Cloud Memory Foam Mattress Topper is a foam mattress surface designed to provide proper lumbar support and spinal alignment while sleeping. This topper has three layers of memory and support foams. The top layer is contoured to fit body position, relieving stress and pressure on sensitive areas. The inner layer is designed with inserts that adds lumbar support for the waist, lower back and hips, and the base layer provides overall cushioning designed to eliminate sagging due to overa

Converta Step

ConvertaStep is an incline platform lift that is designed for use by individuals with limited mobility and require assistance to navigate stairs. The ConvertaStep is constructed of heavy, weather-coated steel that can lift up to 750 pounds. Its smooth lift raises in 8 to 15 seconds and is 31 inches wide to accommodate most chairs and other mobility devices. It is designed to be inconspicuous to the eye and blends easily with any home decor. The small, cost-effective lift comes in 3 sizes and is

Convertible

---- PROTOTYPE --------- PURPOSE: To design a prototype a convertible ramp for individuals with mobility or lower extremity disabilities or spinal cord injury and others who use a wheelchair. The Convertible is a ramp that can be installed of a flight of functional stairs. It has several moveable plates that lay flat on each step; however, when a lever is pulled, these plates rotate to interlock into a single inclined plane, forming an access ramp that spans the flight of stairs. The device has

Coracle Swings (Standard, Deep Window, & Shallow Heavy Duty)

Coracle Swings are designed for use by children and adults with severe physical or neurological disabilities. These swings are designed to enable the user to lie or sit in them. Made of reinforced nylon material that conforms to the users body shape, the ends of the swings are padded and pull ropes enable the user to move the swing independently. The separate suspension ropes are adjustable so that the user's head may be raised. Three different models are available: The Standard Coracle, model

Corduroy Wedge Pillow

The Corduroy Wedge Pillow is a wedge pillow designed to provide support for individuals with neck, back, or shoulder pain or injury. Filled with shape-retaining latex foam, this wedge pillow is designed to retain its shape while providing comfortable support to the neck, back, or shoulder during relaxation on a couch, daybed or regular bed. The pillow is covered with 100-percent cotton corduroy that is machine washable. DIMENSIONS (HxLxW): 11.5 x 18 x 10 inches. COLORS: Slate blue, burgundy, h

Corner Grab Bar

Stainless steel corner grab bar with vertical extension on one end. 1, 1 1/4 or 1 1/2 inch diameter, 1 1/2 inch wall clearance. Satin finish. Exposed or concealed mount. 48 by 24 by 32 inches high. Right or left.

Corner Guard (Model Dl2528)

The Corner Guard, model DL2528, is designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. The protectors prevent chipped plaster or paint or torn wallpaper resulting from bumping by wheelchairs, scooters, walkers, crutches, or canes. These protectors are made from durable plastic molded to fit over corner edges. They come with three screw holes pre-drilled on each side. DIMENSIONS: 48 inches high x 1/16 inch thick x 2.5 inches wide on each side. COLOR

Corner Mounted Tub Rail (Model 3236-C)

The Corner Mounted Tub Rail ##3236-C is a stainless steel wall to floor grab bar for bathtubs. The support consists of an L-shaped horizontal hand bar that attaches to the side and back walls of the tub, and a vertical bar that attaches to the underside of the hand bar and mounts in the floor on the outside of the tub. This grab bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS (WxDxH): 36, 40, 42, or 48 inch crosspieces x 12 x 32

Corner Shower Seat (Model 0010)

Folding corner shower seat made of 16 gauge stainless steel polished to a satin finish. Bracket for wall mounting, Heavy duty stainless steel piano hinge. Overall size: 15 1/2 by 15 1/2 inches by 3/4 inch. Folds up against the wall.

Corner Shower Seat (Model F727120000)

The Corner Shower Seat, model F727120000, is a corner shower seat designed for use by individuals with balance or mobility disabilities. This shower chair fits into the corner of a stall requiring minimal space. It has a built-in front compartment that can be used to hold soap and a wash cloth. The chair is durable, rust proof, and easy to clean. DIMENSIONS (HxDxW): 16.5 x17 x 23 inches. The seat’s back height is 5.75 inches and the base is 24 inches. CAPACITY: 300 pounds. WEIGHT: 15 pounds. COL

Corner Sitter

The Corner Sitter is a corner chair designed for use by children with neurological or severe physical disabilities. This chair is designed to help improve posture and promote upper body control. Features include a reclining backrest with adjustable sides for lateral support. The backrest angle is adjustable from a 20 degree recline to 15 degrees prone. Other features include a hip belt and an adjustable depth, removable pommel. The chair folds flat for storage. OPTIONS: Options include a high-ba

Corner Toilet Bar (Models Gs711 & Gs712)

Stainless steel corner grab bar for toilet. 1, 1 1/4 or 1 1/2 inch diameter, 8 inch wall clearance. Satin finish. Exposed or concealed mount. 33 inches high with 8 inch perpendicular extension support. Right or left.

Corner Tub Bar.

Stainless steel corner wall grab bar. 1, 1 1/4 or 1 1/2 inch diameter. 3 1/2 inch wall clearance. Satin or safety grip finish. 20 inches by 36 inches.

Country Pull-Out Kitchen Faucet (Model R77V3)

The Country Pull-Out Kitchen Faucet, model R77V, is a single lever kitchen faucet on flexible hose designed for use by individuals with grasping, upper extremity, or mobility disabilities. The end of the spout can be pulled out on a stainless steel coil. Other features include dissimilar ceramic discs for smooth operation, a chlorine-resistant inner liner, an IAPMO compliant double check valve, and 2.5 gallon per minute (GPM) capacity. OPTIONS: 1.75 inch extension kit for thick deck installation

CourtEdge Reducer

CourtEdge™ Reducers are threshold ramps designed to help make flooring transitions more accessible to individuals who use wheelchairs. These ramps can meet almost every floor transition requirement - from ½ inch up to 2½ inches in standard models, and custom heights exceeding 4½ inches. Made of 100% recycled rubber tire, CourtEdge™ Reducers have a slip-resistant surface and no load weight limitations. They are available in hundreds of configurations for interior and exterior use, and are pre-cut

Courtroom Lift Accessor

The Courtroom Lift Accessor is an interior wheelchair lift designed for use by individuals who use wheelchairs or who have walking or mobility disabilities. Designed for new construction or for retrofitting, this lift provides access to the witness box in a courtroom or it can be used to provide access the judge's bench floor level for court personnel.

Courtroom Rostrum Wheelchair Lift

The Courtroom Rostrum Wheelchair Lift is an interior wheelchair lift designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. It is intended to provide discrete access to an auditorium or courtroom. The lift has momentary (constant pressure) control switches on the platform, at the upper landing, and at the bottom landing. It features a twin-rail, chain and sprocket design. The quiet electric motor unit includes a standard battery backup. In the event

Cozycare Unreal Sheepskin (Model 94076-Mn)

The Cozycare Unreal Sheepskin is a decubitus pad designed to prevent pressures sores in infants in incubators or open cribs. The pads are made of plush, thick polyester material that provides extra support and helps to evenly distribute pressure while allowing air to circulate. This pad is flame resistant, nonallergenic, and machine washable. DIMENSIONS (LxW): 17 x 20 inches.

Crawford Wheelchair Accessible Picnic Table (Model Kspb6Gpicada)

The Crawford Wheelchair Accessible Picnic Table, model KSPB6GPICADA, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This long table has seats on two sides with space for a wheelchair on one end. The table top and seats are made from 100 percent solid recycled plastic boards with UV stabilized color. The galvanized steel frame has cross braces for additional support. Stainless steel assembly hardware is included. DIMENSIONS (HxLxW):

Crystal Crib

The Crystal Crib is a circle bed designed for use with infants with cognitive or severe physical disabilities. Designed to promote infant safety and provide an unrestricted view for the developing child, this metal crib offers easier child access to parents and eliminates the dangers of sharp corners found on standard cribs. The crib has clear Plexiglas spindles, drop-side access, and a canopy assembly and includes a high-density foam mattress. OPTIONS: Bedding and linens watterproof pad, and ma

Ctl Series Classroom Table

The CTL Series Classroom Table is a height-adjustable classroom table and computer work station designed for use by children who use wheelchairs. This table can be used in school computer labs. The work surface is made from high-density laminated wood and is supported by a powder-coated steel frame. OPTIONS: Enclosed CPU holder; keyboard drawer; keyboard arm and tray; modesty panel; wheel kit; surge protector; cable management kit; table to table cable connection kit; floor to table cable connec

Curb Cut Ramp

The Curb Cut Ramp, also called the Built-Up Curb Cut Ramp, is a curb ramp designed for use to provide wheelchair access at curbs. This ramp has a built-in non skid surface with side wings to allow safe access onto and off the curb. This portable unit can be installed at any curb, and is suitable for either permanent or temporary use. It is sturdy enough to support the weight of a vehicle that may roll over it.

Curb Ramp

The Curb Ramp is a portable ramp designed for use by people who have lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. It is intended to help a person to get over curbs or uneven thresholds. Made from aluminum, the ramp is available with wheel guards on both sides, or with no wheel guards, allowing it to be used at a threshold where a door swings out. It has transition plates on both ends for a smooth entrance onto or exit off of the ramp. DIMENSIONS

Curbside Voting Sign

The Curbside Voting Sign, model O-40, is an access sign indicating the availability of curbside voting for boters with disabilities. This silk screened sign is made of rust-proof corrugated plastic, and has the words, "Curbside Voting," above the International Access Symbol. The lightweight sign fits on a stand, which is sold separately. DIMENSIONS (HxW): 22 x 14 inches. COLOR: Blue print on white background.

Curbside Voting Sign (Model Sg-103F)

The Curbside Voting Sign, model SG-103F, is an access sign designed for use to direct voters with disabilities to an accessible voting location or polling place. The sign features the International Access Symbol (a stylized drawing of an individual in a wheelchair) with the word "CURBSIDE" above the symbol and the word "VOTING" below. It is made from corrugated plastic for all weather conditions and attaches to the Corrugated A-Frame (SG-F) which is sold separately. DIMENSIONS (HxW): Sign face i

Curved Handicap Voting Booth Leg Adapter Kit (Model 1270)

The Curved Handicap Voting Booth Leg Adapter Kit, model 1270, is a voting booth accessory designed for use to make a standard voting booth accessible to individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs. The legs are curved to provide greater width between the booth legs to accommodate a wheelchair. This kit converts any Poll Star Voting Booth or All Vote Voting Booth into an accessible voting booth.

Cushion Ease Side Rail Pads (Models 6013363, 6013365 & 6013663)

The Cushion Ease Side Rail Pads, models 6013363, 6013365 and 6013663) are side rail pads designed for use by individuals with physical disabilities. The pads' pressure relieving foam helps protect the user from hard side rails and reduces gaps between the bed-rails and mattress. Each pad has a Staph-Chek vinyl cover, and it is antimicrobial, flame- and stain-resistant and easily cleaned. The pads can be used with standard or swing-down bed rails, and they attach to the top rail using hook-and-lo

Custom Adapted Footstool

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted footstool for an adult with cerebral palsy. This individual worked as a disability advocate and often spends most of her eight-hour work day at her desk. She had difficulty with her feet resting on the floor while sitting and would experience swelling and muscle spasms, particularly when she was tired. Commercially available footstools were ill suited. The custom adapted stool was created using lightweight plywood to constr

Custom Braille Signs

Custom Braille Signs are tactile access and facility signs that the purchaser may have customized to include the messages they need, with or without graphics, with the Grade 2 Braille translation. Depending on the model, messages may include 1, 2, or 3 lines of 5 to 11 letters each. DIMENSIONS: 8 x 8 inches ($32), 8 x 4 inches ($23.95), 8 x 2 inches ($18.30), and 4 x 4 inches ($18.30). COLOR: White on black, brown, red, blue, or burgundy background; or black, brown, red, blue, or burgundy on whi

Custom Dining Chair

CUSTOM ADAPTATION PURPOSE: To enable an individual with short stature to sit comfortably while dining. A custom-designed wooden chair was built. The seat height is the standard 45 centimeters from the floor; however, the seat depth is shallower than is standard to enable her to sit comfortably and be supported by the chair back. The chair has a lacquered finish and an upholstered seat. A small matching wooden stool was also built, which the individual can use to step up to get on to the chair a

Custom Level Numbering With Braille (Model Rre-675)

Custom Level Numbering with Braille, model RRE-675, is a braille and tactile sign designed for use by individuals who are blind or have low vision. Signs are custom engraved to mark the levels in a building. Each sign has a large number in raised text in the center. Below the number in Grade 2 braille are the word "level" and the number. The sign has an acrylic core with a laser-engraved top color / tactile layer and a matte finish. The sign includes permanent acrylic adhesive with removeable ba

Custom Lumnar Pillow

This custom lumbar cushion is an especially made-to-order lumbar pillow designed to help individuals who have a disability or condition that affects their lower back. Lumbar cushions are made to support the lumbar vertebrae, L1 to L5 of the spine. Non-returnable.

Custom Redwood Ramp

Custom Redwood Ramps are ramps designed for use by individuals with lower extremity, mobility, or walking disabilities or spinal cord injury. This heavy duty ramp works with wheelchairs, walkers, scooters or canes. Each ramp is custom designed to meet the requirements of a specific environment, including situations where an redwood ramp is preferred over a standard aluminum ramps for aesthetic reasons. OPTIONS: Handrails can be added on one or both sides.

Custom Symbol Of Access Signs

The Custom Symbol of Access Signs provide a means of posting unique messages on signs with the international access symbol. These messages may include handicapped parking signs for a particular company at a shopping center or specific penalty amounts or fines for illegally parking in spaces reserved for persons with disabilities. These signs are made of 18 gauge steel and are equipped with mounting holes for immediate posting. Messages may contain from 8 to 20 two-inch letters per line and 2 to

Custom Wording With Braille Sign (Model Rsme-Custom)

The Custom Wording with Braille Sign, model RSME-CUSTOM, is a braille and tactile sign designed for use by individuals who are blind or have low vision. This sign is engraved with the print word or phrase specified by the user and the braille equivalent of that word or phrase just below the print. The sign has an acrylic core with a laser-engraved top color layer, tactile symbol, Grade 2 Braille, and a matte finish. The sign can be mounted using the included permanent acrylic adhesive with remov

Customized Double Sized Bed

CUSTOM ADAPTATION PURPOSE: To provide a customized bed for children with multiple disabilities. The customized bed was created for twin boys who have multiple disabilities including cerebral palsy, epilepsy, developmental delays, and vision and hearing disabilities. Caregivers wanted the two boys to be able to have shared sleeping arrangements due to the therapeutic benefits seen as a result of the boys' emotional bond. Additionally, the customized bed was to be placed in a family room rather t

Customized Table

CUSTOM ADAPTATION PURPOSE: To provide a customized table with a top level for a laptop computer and a lower slide-out lockable tray for a keyboard for persons with visual impairments, diabetes, and mobility disabilities who use a manual wheelchair. The table top and tray are made from plywood with pine surrounds, and the legs are solid maple. The legs have lockable casters so the table can be easily moved and stored when not in use. The tray slides back and forth in slots on either side, and i

Cut-Out Table And Foot Support

CUSTOM ADAPTATION PURPOSE: To provide a child with multiple disabilities with a work and play surface. Using an existing round table as a base, a removable square tabletop with a cut out in the center of each side was designed to be clamped on. Made of 18-millimeter (mm) thick MDF, the corners of the top were rounded and wooden cleats were fitted under each of the four sides. The cleats are turned and locked with T-bolts to secure the square top to the table. A platform of 9-millimeter plywood

D'lux Pullout Kitchen Faucet (Models R3830U-Apc, R3810U-Stn, R3805U-Wh, R3802U-Bk, R3835U-Pc/wh, & R3832U-Pc/bk)

The D'Lux Pullout Kitchen Faucet, models R3830U-APC, R3810U-STN, R3805U-WH, R3802U-BK, R3835U-PC/WH, and R3832U-PC/BK, is a single lever kitchen faucet designed for use by individuals with grasping, upper extremity, or mobility disabilities. This faucet has an ergonomic loop handle and the end of its spout can be pulled out on a stainless steel coil. Other features include a ceramic disc cartridge, a hard water resistant soft touch elastomer spray face and anti-scald device, dissimilar ceramic d

D.I.Y. Lamp Switch For Dogs

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: This DIY product is specially designed for people who use trained service dogs to help them in daily life. The problem was that the service dog could not push the button very well, therefore this lever system was the solution. Another advantage of this specific product is that it can be used by service dogs, people who use a wheelchairs and older people. MATERIALS USED: Strong wooden plates (we used multiplex) thickness: 6millimeter; surface: 1x 450mil

D.I.Y. Make-N-Take Cutting Board

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: This cutting board is for anyone who has the use of only one hand. It has stainless steel nails to hold vegetables in place. PVC corner guards help prevent food from sliding off the board. It has a non-slip material to keep the board from sliding. MATERIALS USED: 1 - Plastic Cutting Board, 2 - PVC Pipe (around 4 inches), 3 - Long Nails (1¾ inch), 4 - Screws (½ inch), 1 - Small Package of Easy Liner shelf paper or any type of non-slip material that can

D9-6 Handicap Access Sign

The D9-6 Handicap Access Sign is an access sign designed for use on highways and streets to identify locations accessible to individuals with disabilities. The sign is square and features the international access symbol. The sign is made from heavy-gauge aluminum alloy, with rounded corners and smoothed edges to prevent injury. Holes are punched in the sign for mounting and are located in the center of the sign at one inch increments from top to bottom to match standard sign posts. The sign has

Dado Express Pocket Door

The Dad0 Express Pocket Door is a motorized space saving door designed for use by individuals with mobility or severe disabilities or spinal cord injury. This modernized pocket door uses tempered Starphire glass and features a patented motorized system with advanced motion control. The glass door lies flush with any finished wall. The system features a pre-fabricated pocket door frame, a precision silent track, micro-processor controlled operation, and glass touch panels. Using a sensor, a maste

Decpac Multipurpose Ramp (Model Mp44)

The Decpac Multipurpose Ramp, model MP44, is a portable ramp designed for use to provide access to vans or steps for individuals with mobility or lower extremity disabilities or spinal cord injury. This four-panel folding ramp can be used for a rise up to 13 inches over steps at home or to enter the side of a minivan. When folded it can fit into a van and slide under a seat. The ramp is constructed from laminated fiberglass. The top surface has a textured non-slip tread and the edges are marked

Decpac Multipurpose Ramp (Model Mp55)

The Decpac Multipurpose Ramp, model MP55, is a portable ramp designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. It can be used as a temporary wheelchair ramp in a rented home or in a building that does not have homes, such as one that has historical significance. The ramp can accommodate a rise of up to 16 inches. It is made from laminated fiberglass. The top surface has a textured non-slip tread and the edges are marked with a caution stripe. Th

Decpac Multipurpose Ramp (Model Mp66)

The Decpac Multipurpose Ramp, model MP66,is a portable ramp designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. It can be used for a rise of up to 20 inches. It has four laminated fiberglass panels that are secured with a hook and loop strap when folded. The top surface has a textured non-slip tread and the edges are marked with a caution stripe. The top edge is indicated with a label and has a thick, grooved rubber pad to hold at the edge of the

Decpac Multipurpose Ramp With Edge Barrier (Model Mpeb44 )

The Decpac Multipurpose Ramp with Edge Barrier, model MPEB44, is a ramp designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. It is a four-panel folding ramp with side barriers to help keep a wheelchair, scooter or stroller on the ramp. This ramp can be used for entryways with steps or to enter or exit a minivan on the side. The ramp can be used for a rise up to 13 inches. When folded the ramp can fit in a van and slide under a seat. The ramp is mad

Decpac Multipurpose Ramp With Edge Barrier (Model Mpeb55)

The Decpac Multipurpose Ramp with Edge Barrier, model MPEB55, is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This collapsible four panel ramp can fit a rise of up to 16 inches. It fits in the side of a minivan, but when folded is compact enough to store under the seat of the van. Constructed from laminated fiberglass. its top surface has a textured non-slip tread and the edges are marked with a caution stripe. The top edge

Decpac Multipurpose Ramp With Edge Barrier (Model Mpeb66)

The Decpac Multipurpose Ramp with Edge Barrier, model MPEB66, is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This ramp can accommodate a rise of up to 20 inches, and it can be used for van access. Constructed from laminated fiberglass, its top surface has a textured non-slip tread and the edges are marked with a red caution stripe. Edge barriers are included for safety. The top edge is indicated with a label and it has a th

Decpac Personal Mini Ramp (Model Mp24)

The Decpac Personal Mini Ramp, model MP24, is a portable curb or threshold ramp designed for use by individuals with mobility disabilities. The ramp is small enough to carry in a bag on a wheelchair and can be stored in a vehicle or at home. The ramp is made from laminated fiberglass. The top surface has a textured non-slip tread and the edges are marked with a caution stripe. The top edge is indicated with a label and has a thick, grooved rubber pad to hold at the edge of the step. The rubber g

Decpac Personal Standard Ramp (Model Mp210)

The Decpac Personal Standard Ramp, model MP210, is a portable curb or threshold ramp designed for use by individuals with mobility disabilities. This ramp can be used to navigate over curbs or thresholds with a rise of up to 9 inches, and it is small enough to be carried in a bag on a wheelchair. The ramp is constructed from laminated fiberglass. The top surface has a textured non-slip tread, and the edges are marked with a caution stripe. The top edge is indicated with a label and has a thick,

Deep Steps

DO IT YOURSELF ENTRY --- PURPOSE: To enable a person to uses a walker when climbing stairs. Deep treads are added over existing steps without removing original treads, allowing easy conversion back to the original steps when deep treads are no longer needed. A reputable building contractor can design and build deep steps. ATSolutions makes the following recommendations: Make stair treads and stair runners from 2x6 feet and 2x12 feet CCA/Treated lumber. This provides protection from wood decay an

Delta Ultra Light 1000 Full-Electric Bed (Model 15033)

The Delta Ultra Light 1000 Full-Electric Bed, model 15033, is a motorized bed designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. This bed can be raised and lowered at three independent points, the head, knee and foot, and the entire bed can be raised and lowered to facilitate transfer. The headboards and footboards are interchangeable with Drive's and some other manufacturers bed ends. FRAME: The frame includes woodgrain head- and footboards and

Delta Ultra Light 1000 Full-Electric Low Bed (Model 15035)

The Delta Ultra Light 1000 Full-Electric Low Bed, model 15035, is a motorized bed designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. This bed can be raised and lowered at three independent points, the head, knee and foot, and the entire bed can be raised and lowered to facilitate transfer. The headboards and footboards are interchangeable with Drive's and some other manufacturers bed ends. FRAME: The frame includes woodgrain head- and footboards

Delta Ultra Light 1000 Semi-Electric Bed (Model 15030)

The Delta Ultra Light 1000 Semi-Electric Bed, model 15030, is a motorized bed designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. This bed can be raised and lowered at three independent points, the head, knee and foot, and the entire bed can be raised and lowered to facilitate transfer. The headboards and footboards are interchangeable with Drive's and some other manufacturers bed ends. FRAME: The frame includes woodgrain head- and footboards and

Deluxe Blanket Support

The Deluxe Blanket Support is a blanket support designed for use by individuals with fractures of the foot, burns, pressure sores/ulcers, or sensitive skin. Made of aluminum, the blanket support is designed to hold blankets away from the feet. It folds flat when not in use. DIMENSIONS (HxW): 1.5 x 12 inches. WEIGHT: 1 pound.

Deluxe Grab Bar

The Deluxe Grab Bar is a decorative wall-mounted grab bar designed for use by individuals with balance or mobility disabilities or spinal cord injury. The bar attaches to the wall at two points, with round, square, or diamond-shaped flanges at the points of attachment. DIMENSIONS: 12, 16, 18, 24, 32, or 36 inches long. The round flanges are 3 inches in diameter; the square flanges are 3 x 3 inches, and the diamond-shaped flanges are 4.25 inches. COLOR: Available finishes include antique brass, p

Deluxe Grab Bars (Models H212, H216, H218, H224, H232, H232L, & H232R)

The Deluxe Grab Bars are grab bars designed for use by individuals with balance and mobility disabilities. All models are made of chrome-plated steel. The mounts are coated with soft plastic brushing. Models H232L and H232R are 90- degree angle grab bars and are available with a left or right mounting. DIMENSIONS: Model H212 is 12 x 4.75 inches; model H216 is 16 x 4.75 inches; model H218 is 18 x 4.75 inches; model H224 is 24 x 4.75 inches; model H232 is 32 x 4.75 inches; model H232L is 32 x 4.5

Deluxe Hand-Held Shower (Model A830004)

The Deluxe Hand-Held Shower, model A830004, is a handshower with a flexible hose designed for use by individuals who shower or bathe while seated. The flexible metal hose attaches to the existing wall-mounted shower head and the handshower provides fingertip, push-button control of the water flow. Two chrome-plated, adhesive wall mounts are included for height-adjustable storage or hands-free use. DIMENSIONS: Hose is 84 inches long and 0.5 inches in diameter.

Deluxe Handheld Shower Massager (Model 556914)

The Deluxe Handheld Shower Massager, model 556914, is a handshower with flexible hose designed for use by individuals with spinal cord injury or mobility or balance disabilities. The unit features an adjustable massaging head with three spray options, a chrome/mylar-reinforced hose, and a chrome shower arm mount. DIMENSIONS: The hose is 84 inches long.

Dementia Organization Care System

---- PROTOTYPE --------- PURPOSE: To create a prototype of an organizational aid to assist individuals with dementia organize items essential to daily life. The Dementia Organization Care System is designed to eliminate the distress caused from the confusion of individuals with dementia. The design process involved meeting with occupational therapists to discuss the issues with current commercial products and the layout of home environments. Multiple sketches and designs were presented to a prof

Dependa-Bar

The Dependa-Bar is a wall-mounted grab bar designed for use by individuals with balance, walking, or mobility disabilities. Designed for use in the tub or shower or beside the toilet, this bar consists of a vertical wall-mounted grab bar with a horizontal fixed bar at the bottom, and a moveable P-shaped bar in the center. The moving bar locks every 45 degrees (5 positions), providing a support rail that moves with the user. This stainless steel unit mounts securely to structural studs behind bat

Design Basics Universal Access House Plans

Design Basics Universal Access House Plans are plans designed for use by builders of homes accessible to individuals with mobility or other disabilities. Designs include 2-, 3-, and 4-bedroom homes in Country, Traditional, or Farm House style with 1, 1.5, or 2 stories. Finished houses range from 1,394 to 3,061 square feet. Custom alterations can be made.

Designerseries 1040 Toilet Partition System

The DesignerSeries 1040 Toilet Partition System are accessible restroom stall partitions designed for use by people with grasping, fine motor, neurological or upper extremity disabilities, arthritis or other conditions that may cause weakness in the hands. Custom made to fit field conditions, these partitions are made of industrial grade particle board with stainless steel edge trim and concealed stainless steel hardware. They are scratch, dent and impact resistant and allow for complete removal

Desktop Desk

The Desktop Desk is an adapted desk or table adapter designed for use by individuals with fine motor, orthopedic, or mobility disabilities. Placed on top of a table or other table-like surface, this lightweight, portable unit provides a large, stable writing surface with adjustable heights and angles. The unit's clear plastic, removable and erasable writing surface allows for templates to be used in writing practice or for tracing art. An accessory tray attaches to either side of the unit and pr

Detectable Warning Panel

The Detectable Warning Panel is a detectable warning surface designed for use on pre-cast curb ramps and other locations to provide tactile warnings to pedestrians who are blind or have low vision. The surface comes as cladding for a custom precast concrete unit available in various colors and configurations, with matching custom components. The paver is wet set into fresh concrete and mechanically anchored to the sidewalk to become part of the walking surface. The non slip surface has truncate

Detectable Warning Plate

The Detectable Warning Plate is a detectable warning surface designed for use by individuals who are blind or have low vision. Made of cast iron, the plate is durable and adheres to concrete without wearing, pealing, cracking or delaminating. The measured coefficient of friction is 0.9. The cast iron material can withstands snow plow abuse. The unit is installed into prepared concrete with reusable lifting springs. Upon exposure to moisture, the unpainted cast iron plates forms a temporary iron

Detectashield

DetectaShield is a detectable warning surface designed for use by individuals who are blind or have low vision. It is composed of panels that can be integrated into paved surfaces to help visually impaired individuals detect intersections by foot or cane. It has high-traction surfaces located on both truncated domes and bands of the panel surface between the rows of domes. The domes' smooth sides increase audibility when a pedestrian's cane strikes the surface. Made from sealed concrete reinforc

Device For Star Shaped Water Faucets.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Device enables those with limited hand function to turn faucets on and off. Partially straighten out a steel S hook and saw it in half. Saw a U bolt in half. Weld half of the S hook to half of the U bolt. Drill a 1/4 inch hole in the top of a number 2 size file handle. Epoxy the file handle to the end of the U bolt. Includes diagrams. SKILLS REQUIRED: Welding. AUTHOR: Independence Factory TITLE: Make It Cheap Volume 3 REF: Middletown, Ohio: Independenc

Device To Flush Toilet

CUSTOM ADAPTATION PURPOSE: To enable a teenage girl with short stature to independently flush a toilet with a push-button flush mechanism. A long lever was fashioned that enables the user to operate both the full- and half-flush buttons. The device consists of a horizontal stainless steel rod housed in a stainless steel casing. At one end, the rod is fitted with a long, flat handle which the user is able to push. The other end of the rod is bent into a vertical position and the point, which is

Device To Flush Toilet

CUSTOM ADAPTATION PURPOSE: To provide a customized toilet flushing device for use by person with osteoarthritis. The adapted mechanism is designed to operate the two flush buttons easily. A mainly stainless steel frame, with three supports holds the frame in place just above the two flush buttons. The three supports are a commercial suction cup which fastens to the tiled wall behind the toilet, and two vertical legs made of small-diameter pipe, that sit on the porcelain of the cistern. Two hori

Devon Deluxe Folding Support Rail

The Devon Deluxe Folding Support Rail is a wall grab bar designed for use in the bathroom by individuals with mobility or balance disabilities. The U-shaped epoxy-coated steel tube rail is affixed to a plated mounted on the wall. A spring mechanism allows the rail to fold up against the wall when not in use. DIMENSIONS: The tubing 1.75 inches in diameter and the unit is 30 inches long. COLOR: White.

Devon Floor-Mounted Folding Rail

The Devon Floor-Mounted Folding Rail is a floor-mounted grab bar for toilet designed for use by individuals with mobility or balance disabilities. The U-shaped epoxy-coated steel tube rail is affixed to a floor-mounted post using an adjustable clamp. A large plastic adjustment knob enables the rail to be placed wherever needed on the post. A spring mechanism reduces the effort required to lower and raise the rail, and holds it up securely out of the way when not in use. The post is fixed to a fl

Devon Rail With Folding Leg

The Devon Rail with Folding Leg is a wall grab bar for toilet designed for use by individuals with mobility or balance disabilities. The U-shaped epoxy-coated steel tube rail is affixed to a plate mounted on the wall. A spring mechanism allows the rail to fold up against the wall when not in use. The folding leg provides additional security and lessens strains on the wall. The height of the rail can be adjusted prior to wall mounting. DIMENSIONS: The rail is 30 inches long. The height adjusts fr

Devon Support Rail

The Devon Support Rail is a wall grab bar designed for use in the bathroom by individuals with mobility or balance disabilities. The U-shaped epoxy-coated steel tube rail is affixed to a plated mounted on the wall. A spring-loaded cam allows the rail to fold up against the wall when not in use. SIZES: Standard and short. DIMENSIONS: The tubing on both models is one-inch in diameter. The standard model is 30 inches long and the short model is 21.5 inches long. COLOR: White.

Die Cut Symbol Of Access Decal

The Die Cut Symbol of Access Decal is made from an outdoor grade permanent vinyl material that applies to most smooth surfaces. This decal was designed for use on signs, doors, walls, and other similar applications. DIMENSIONS: 2 inches ($5.15 ea), 3 inches ($5.65), and 4 inches ($6.45). COLOR: White.

Die-Raised Aluminum Ada-Compliant Signs

The Die-Raised Aluminum ADA-Compliant Signs are tactile and braille signs designed for indoor and outdoor use at schools, institutions, mass transit stations, and other public settings. These signs are fabricated using .102-inch thick 3003 alloy H-13 anodized aluminum sheet. The copy is then die-raised to produce raised, anodized copy. The background has a baked enamel matte or wrinkle finish. OPTIONS: ADA-compliant copy with Grade 2 Braille and vandal-resistant mounting are available. COLOR: Sa

Digital T87 Round Thermostat (Model Ct8775)

The Digital T87 Round Thermostat, model CT8775, is a digital thermostat designed for use by individuals with low vision. Temperature is adjusted by twisting a cover ring. As the ring is twisted, the user can feel and hear clicks that confirm the changes. The new temperature setting is registered on a large digital display. A backlight illuminates the display when a button is touched or when the dial is twisted. Heating mode is indicated by a flame icon; a snowflake indicates cooling mode. The te

Digital Talking Indoor / Outdoor Thermometer

The Digital Talking Indoor/Outdoor Thermometer is an electronic thermometer designed for use by persons who are blind or have low vision. The unit can sit on a table or be mounted to a wall. It has two large liquid crystal displays (LCD), and reads indoor and outdoor temperatures in a true human voice when a button is pressed. It can be preset to read temperatures at a fixed time or hourly, or to give alerts for high temperatures and freezing temperatures. It also can provide the daily high and

Dignity Series (Model 2653)

The Dignity Series, model 2653 is an accessible bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. This tub has a side door that swings open to allow the bather walk in and sit down on a built-in, contoured raised seat. The door has an oversize handle, and a low entry threshold to facilitate entry. There is a large grip bar on the back wall of the tub and a slip-resistant floor. A water jet massage system with in-line heater and air massage system

Dignity Series (Model 3052)

The Dignity Series Model 3052 is an accessible bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. This tub has a side door that swings open to allow the bather walk in and sit down on a built-in, contoured raised seat. The door has an oversize handle, and a low entry threshold to facilitate entry. There is a large grip bar on the back wall of the tub and a slip-resistant floor. A water jet massage system with in-line heater and air massage system

Dignity Series (Model 3260)

The Dignity Series Model 3260 is an accessible bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. This tub has a side door that swings open to allow the bather walk in and sit down on a built-in, contoured raised seat. The door has an oversize handle, and a low entry threshold to facilitate entry. There is a large grip bar on the back wall of the tub and a slip-resistant floor. A water jet massage system with in-line heater and air massage system

Dining Chair With Torso Support

CUSTOM ADAPTATION PURPOSE: To provide support while eating for an individual with Parkinson's disease who leans to the right when fatigued. The dining chair was created from a standard office chair with a high back and a central metal back post. Because the chair was intended only for use over short periods, a single thoracic fin was added to adapt the chair, rather than the usual pair of fins. A plywood mounting plate was fixed to the right armrest and the back of the seat with metal brackets.

Dishdrawer Single Drawer Dishwasher (Model Ds605)

The DishDrawer Single Drawer Dishwasher, model DS605, is an under counter dishwasher designed for use by individuals who use wheechairs or who have difficulty bending over. This compact dishwasher holds five place settings in a drawer located just under the kitchen counter. Features includes nine cycles for specific washing needs, a flow-through detergent dispenser, electronic controls, nylon racks, a delay wash option, and sound insulation. OPTIONS: Two-drawer model (model DD605) with one draw

Diy Adjustable Tray

---- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself adjustable tray for a child with severe disabilities to use drawing, coloring, etc. This DIY tray is a PVC frame with a leg in the middle to allow for angle adjustment. The tray is created from a piece of shower board which is cut to the size needed. The child is then measured and a cutout added to go around the child. The PVC frame is a little smaller than the tray itself and is attached to the tray using Velcro. A drill an

Diy Computer Desk

---- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself accessible computer desk for an individual with Amyotrophic Lateral Sclerosis (ALS). This do-it-yourself computer desk is adapted from Sauder assemble-it-yourself furniture. First, the bookshelf was assembled according to instructions and necessary for getting the proper measurements for the height needed for the desktop. The desktop was constructed from 30 by 30 inch sheet of ¾ inch plywood. The length of the desktop can be

Diy Portable Wheelchair Ramps

--- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself (DIY) portable wheelchair ramp for individuals with lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair to enter or exit to houses, shops or other locations. An individual had used store-bought ramps made of aluminum and found they did not work well and were expensive. Step 1: Calculating the ramp length - The Americans with Disabilities Act Accessibility Guidelines (ADAAG) recommend

DIY Seashell Mirror

The DIY Seashell Mirror is an occupational therapy craft project designed for people with disabilities to use eye-hand coordination to create a beautiful mirror. The creation of this product can serve as a sensory integration exercise.

Diy Wheelchair Rain Poncho

DO-IT-YOURSELF ENTRY --- PURPOSE: The DIY Wheelchair Rain Poncho allows users in wheelchairs to enjoy outdoor activities, even when raining. The poncho not only covers the user, but the chair as well (without touching the ground). TITLE: Wheelchair Rain Poncho Tutorial WEBSITE: http://adaptingcreatively.blogspot.com/search/label/Tuesday%20Tutorial?u....

Door Aid

Powered door operator with adjustable opening and holding times. Uses a DC motor. Can be retrofit to side opening doors. (No information on controls for operating the system.).

Door Butler

Door Butler is a door opener and door closer designed for use by individuals with mobility disabilities. This non-electric device utilizes a Red Thing non-slip hold-open tab to open the door to the position determined by the setting of the tab. The unit enables the individual to close the door while the tab is still engaged on the closer rod. To activate the auto open feature, the door is unlatched from the closed position, and the door automatically opens to the preset position. The door closes

Door Closer

DO IT YOURSELF ENTRY --- PURPOSE: To provide a means for individuals with arthritis or upper extremity, balance, or mobility disabilities to close doors. Included in a chapter entitled "Housekeeping & Getting Around," this article provides detailed instructions and illustrations for creating a door closer using basic materials. Screw eyes are screwed into the door and the doorframe and a heavy, smooth cord is tied to them. A heavy ring-shaped handle is tied to the end to the end of the cord

Door Closer - Archtectural (Series 8000)

Door closer can be used on side hung, balanced door, interior or exterior. Can be mounted on push side, pull side, on jamb or on door. Hydraulic closer. Has adjustable sweep and latch speed, back check cushioning and closing force is optional, by model. Optional hold open arm, finished and metal covers. Standard parts and labor warranty.

Door Finger

The Door Finger is a door closing aid designed for use by people with mobility or lower extremity disabilities, spinal cord injury, and others who use a wheelchairwho have difficulty closing a door behind them. The unit is made of a light weight durable acrylic tube with a soft neoprene hand grip. A cord lock at the top allows it to fit around standard door knobs as well as door levers. With the cord looped around the knob or lever, the user can close a typical door by pulling on the tube. DIME

Door Handle Opener Aid.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Adaptation of a standard round doorknob includes a lever to make it easier to use by a person with hand weakness. Illustrates doorknob adaptation made with 2 round junction box covers, 2 1/2 inch bolts and nuts (4), and a strip of aluminum. One of the junction box covers has a slot cut to allow it to be slipped over the narrow part of the doorknob near the door; the other has a circle cut out of the center so it won't slip off the face of the knob. The

Door Handle Pull

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with limited grasp to opene a door. Form a loop large enough to fit over the door handle at one end of a length of parachute cord (available in hardware stores) Secure the loop around the handle and knot the remaining cord into a large loop to act as a pulling aid. MATERIALS: Parachute cord. AUTHOR: Labbe, A. TITLE: Quest Extra: Doing It Yourself. JOURNAL: Quest. WEB SITE: http://www.mda.org/publications/quest/extra/qe14-5_diy.html REF: V

Door Hinge Expandable (Model 10654)

The Door Hinge Expandable is a door hinge designed to widen doorway openings for wheelchair users. The hinge adds two inches to any doorway opening. The hinges are installed using existing hinge holes and screws. DIMENSIONS (LxW): 3.5 x 2 inches.

Door Knob Gripper

The Door Knob Gripper is a grasping aid for hand designed for use by individuals with arthritis of the hand or fingers or other grasping disabilities. Made of durable rubber, this round gripper slips over the existing knob minimizing hand stress.

Door Knob Helper (Model 640-8114-0200)

The Door Knob Helper, model 640-8114-0200, is a door handle lever designed for use by individuals with grasping or upper extremity disabilities, arthritis, or other wrist or hand pain. The lever device is constructed of rubber and fits over most standard round door knobs. It is designed to eliminate turning or twisting of wrists and hands by enabling the user to press down on the lever to open a door.

Door Loop.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Loop on door handle to use forearm to open or close a door. A large loop of webbing or other strap is placed on a door handle to allow a poerson to use their forearm to open or close a door rather than using their hand. SKILLS REQUIRED: Sewing. AUTHOR: Lorig, K; Fries, J. TITLE: The Arthitis Helpbook: what You can Do For Arthritis. REF: Book: Addison-Wesley Publishing Co, Reading, MA: p 69. NARIC CALL NUMBER: R2178. 1979.

Door Protection Kick Plate (Model 194S)

The Door Protection Kick Plate, model 194S, is a protective panel designed to protect a door from wheelchair-related damage. The plate is available in 0.05-inch gauge aluminum, brass, bronze, or stainless steel with six 0.63-inch truss head screws. OPTIONS: Self-adhesive tape; Spanner head screws; Torx head screws; counter sunk hole. DIMENSIONS: 8, 10, or 12 inches high, with custom width 2 inches less than door width.

Door Securement Hooks

DO IT YOURSELF ENTRYPURPOSE: To prevent children and adults with cognitive disabilities and poor impulse control from repeatedly slamming doors. This project was designed to prevent a child with Down Syndrome from slamming French doors, reducing noise and breakage. The solution was use 75 millimeter cabin hooks to hold the doors firmly against the existing white plastic door stops. The hooks were screwed to the skirting board behind the doorstops in a position too difficult for the child to rea

Door Stopper.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Device to prevent door from closing completely. Inexpensive stopper to prevent door from closing and latching. A snap closing plastic shower curtain ring is wrapped around the edge of the door above the knob. The knob prevents the ring from slipping down the edge of the door. AUTHOR:Idea was in Better Homes and Gardens magazine. REF:Article. 1990.

Doorknob Extender

The Doorknob Extender is a door handle lever designed for use by individuals with grasping disabilities. This door knob extension handle converts a standard doorknob into a door lever, providing extra leverage so less pressure is needed to turn the doorknob. The extender fits over a standard doorknob and allows access to keyholes. A cord or string can be inserted through the handle slot, making doorknobs easier to access for people with limited reach. DIMENSIONS: Handle length is 5 inches. COLOR

Dorma 4600 Series Easy Access

Door closer can be used on hinge hung door, exterior or interior, mounted on push side, pull side, on jamb or on door. Adjustable sweep speed, latch speed and backcheck. Can be set to meet interior barrier free requirements of 5 pounds maximum opening force. Optional delayed action and finishes. Covers standard. 5 year warranty.

Dorma 7600 Series Full Range Door Closer

Door closer can be used on interior or exterior doors. Can be mounted on push side, pull side, on jamb or on door. Adjustable sweep speed, latch speed, back check cushioning. Closing force can be set to meet exterior barrier free requirements of 8.5 pounds maximum opening force. Optional hold open arm and finishes. Delayed action optional. Standard with covers. 5 year warranty.

Dorma Easy Access Door Closer (Ts 83 U1 Series)

Surface applied hydraulic door closer with narrow 2 inch projection. Adjustable from sizes 1 to 4. Can be set to meet interior barrier free requirements of 5 pounds maximum opening force. Standard features include non-critical thermostatic sweep and latch valves, adjustable hydraulic backcheck, and flatform arm assembly. Delayed action optional. Mountings and accessories available for virtually any application. Five year warranty.

Dorma Full Range Door Closer (Ts 83 U2 Series)

Full range surface applied hydraulic door closer with narrow 2 inch projection. Adjustable from sizes 2 to 6. Can be set to meet exterior barrier free requirements of 8.5 pounds maximum opening force. Standard features include non-critical thermostatic sweep and latch valves, adjustable backcheck, and flatform arm assembly. Delayed action optional. Mountings and accessories available for virtually any application. Five year warranty.

Double Acting Door Pivot (Model Dap-3)

The Double Acting Door Pivot, model DAP-3, is a double acting door hinge that allows a door that normally swings inward to swing outward to reach someone who might have fallen in the path of the door. The hinge set includes extra heavy, finely finished top and bottom frame plates, with malleable iron top and bottom door plates, and can be used in conjunction with Stanley Emergency Stop, model ES-I, on commercial double acting interior doors weighing up to 135 pounds and up to 3 feet wide. OPTION

Double Acting Hinge (Model 463040)

The Double Acting Hinge, model 463040, is a door hinge designed for use in the homes of individuals who are at risk for falls or medical emergencies. The hinge allows a door to swing in both directions, enabling a caregiver to open the door even if the individual has fallen against it. Fully adjustable spring tension returns the door to opening. This Class CD160-R hinge accepts doors from 0.38 to 1.38 inches thick and weighing up to 30 pounds. It comes with an adjusting rod, stop pin, and screws

Double Bar Handrails

Double Bar Handrails are handrails designed for use on wheelchair ramps to provide support for users with balance or walking disabilities. The railings are made from galvanized or schedule 40 steel and are designed for permanent or semi-permanent installation. They come in sections which can be used individually or as a component of a larger ramp system. Double bar construction provides an added level of safety by adding a second support bar 16 inches below the handrail bar. Railings can be moun

Double Bed Hand Bed Assist (Model 135)

The Double Bed Hand Assist, model 135, is a grab bar for bed designed for use by individuals with mobility or balance disabilities. This tubular metal frame fits between the bed base and the mattress, offering a rigid handle on either side of the bed. DIMENSIONS: The width is adjustable to fit a 3-foot twin bed through a 5-foot double bed. The height of handle from mattress base is 440 millimeters (mm) and the overall length is 335 mm.

Double Faced Signs

Double Faced Signs are access signs and parking area markers that offer visibility in two directions. The vinyl signs have the following messages on both sides: Exit, Parking, Restrooms, Men, and Women. Each has the international access symbol somewhere on them. MOUNTING: One edge of each sign is bent at a 90 degree angle, and has predrilled holes and foam tape for mounting. DIMENSIONS: 9 x 12 x .030 inches. COLOR: White lettering and symbols on blue background.

Double Medical Sheepskin (Model 105)

The Double Medical Sheepskin, model 105, is a decubitus pad designed for use by individuals at risk for pressure sores or ulcers. This tanned natural sheepskin is machine washable and dryable. It can be used in hospital and nursing home beds, wheelchairs, and in homes on chairs and beds. DIMENSIONS (LxW): 6 x 2.5 feet average size. COLOR: Natural.

Double Wide Rock 'n Stop Footrest

The Double Wide Rock 'N Stop Footrest is a footstool designed for use by individuals with circulatory disabilities or those who spend long periods sitting at a desk. Designed with an extra-wide surface to accommodate a more natural leg spread, this footrest features corrugated rubber rockers that allow for smooth motion as well as steady positioning at a desired footrest angle, a platform constructed of MDF covered with durable vinyl, and channels across the surface of the platform that provides

Doze

---- PROTOTYPE --------- PURPOSE: To design a prototype of a sleep positioner for children with disabilities, particularly those children who experience muscle tension and loss of muscle tone. Doze is a sleep positioner that assists with side-lying posture at bedtime. The pod-like design decreases the risk of sleeping in awkward positions that may interfere with growth, put pressure on the spine, as well as affect air flow resulting in breathing problems. The Doze design is inspired by the armad

Drain Fitting (Model Lkad18)

Drain Fitting, model LKAD18, is an offset draining fitting designed for use under wheelchair-accessible sinks. Made of chrome-plated brass, it has an offset tailpiece that allows wheelchairs to fit under the sink and a chrome-plated steel perforated grid strainer. DIMENSIONS: Drain opening is 3.5 inches in diameter; the strainer is 3 inches in diameter; top diameter is 4.5 inches. The tailpiece is offset up to 12.75 inches.

Drain Fitting (Model Lkad35)

The Drain Fitting, model LKAD35, is an offset drain fitting designed for use in wheelchair-accessible bathrooms and kitchens. This fitting has a stainless steel body and strainer basket, with a chrome-plated brass tailpiece that is offset to allow wheelchairs to fit under the sink. The drainer has a flex stem and rubber stopper. DIMENSIONS: Drain opening is 3.5 inches in diameter. The top diameter is 4.5 inches. The tailpiece is offset 12.75 inches.

Drawer And Cabinet Pulls

DO IT YOURSELF ENTRYPURPOSE: To enable individuals with upper extremity disabilities or tremors, arthritis, or grasping or fine motor disabilities to open cabinets and other doors. Included in a chapter entitled "Kitchen & Meal Time," this article describes how cabinet door knobs and drawer pulls can be replaced with D-shaped handles to facilitate grasping. A D-handle can also be attached to the door of a front-loading dishwasher for easier opening. Attaching a loop of rope or webbing to a D

Drawer Pulls

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with limited grasp to open drawers with knob pulls. The knobs can be removed and a length of parachute cord (available in hardware stores) threaded through the holes and knotted inside the drawer. In lieu of removing the knobs, cut a length of cord several inches longer than the distance between the two knobs, then form and knot a loop at each end large enough to slip over the knobs. MATERIALS: Parachute cord. AUTHOR: Labbe, A. TITLE: Que

Dream Series Hi Side Bed (Models 1200, 1700, 1900, 2200 & 2700)

The Dream Series Hi Side Bed, models 1200, 1700, 1900, 2200 and 2700, is an enclosed bed designed designed to prevent individuals with cognitive, emotional, or behavioral disabilities or autism from leaving the bed without the use of restraints. This bed features solid wood construction and an enclosure that extends 32 inches above the mattress (up to 40 inches when mattress is lowered on model 1900). It has a poly resin coated Bunkie board. There is a door on one side of the bed that locks on t

Dream Series Standard Side Bed (Models 1200, 1700, 1900, 2200 & 2700)

The Dream Series Standard Side Bed, models 1000, 1500, 1800, 2000 and 2500, is an enclosed bed designed designed to prevent individuals with cognitive, emotional, or behavioral disabilities or autism from leaving the bed without the use of restraints. This bed features solid wood construction and an enclosure that extends 20 inches above the mattress (up to 30 inches when mattress is lowered on model 1900). It has a poly resin coated Bunkie board. There is a door on one side of the bed that lock

Dressing Table

DO IT YOURSELF -- PURPOSE: To make daily grooming tasks more accessible to individuals who use wheelchairs or who are unable to stand for long periods. This article, included in a chapter entitled "Bedroom & Getting Dressed," provides suggestion for creating an accessible vanity and personal grooming area. Suggestions include using a small, sturdy table with a comfortable seated height and sufficient knee clearance for a dressing table. If needed, select a chair that meets the user's specifi

Ds100 Series Audible Pedestrian Signal

The DS100 Series Audible Pedestrian Signal is designed to improve crosswalk safety for pedestrians who are blind or have low vision. This audible pedestrian signal (APS) features up to four Walk "Cuckoo" & "Peep" sound and Dynamic Proportional Volume Compensation that monitors the ambient noise level and adjusts output to ensure the audibility of the signal. Volume is normally preset to 5 decibels (dB) above ambient noise. Another feature, Sound Inhibit, allows the audible signal to be disab

Dual Level Bathtub Rail

The Dual Level Bathtub Rail is a grab bar for the bathtub designed for use by for individuals with mobility disabilities. The rail provides the individual with a high/low grip support, including a straight crossbar, for support while moving into or out of the bathtub. Each gripping area has a textured finish. The rail clamps to the side of the tub with adjustable spring steel clamps lined with rubber pads to protect the tub. DIMENSIONS (HxDxW): 16 x 1 x 12 inches. The clamp adjusts from 3.5 to

Dumbwaiter

The Dumbwaiter is a dumb waiter designed for commercial use by individuals with mobility or upper extremity disabilities. This monorail-style unit features a steel rail and a steel car and can accommodate openings on three sides. The unit offers automatic controls from any floor. Safety features include a broken cable safety device and slack cable disconnect. The unit can be installed at floor or counter level and comes partially pre-wired and pre-assembled for easy installation. DIMENSIONS: Dim

Dura-Glide 2000/3000 Sliding Door Operator

Powered door operator for sliding doors. For single or bi-parting doors. Heavy duty, high pedestrian traffic volume system. Threshold activating and safety systems.

Dura-Grip General Code Stair

The Dura-Grip General Code Stairs are ADA compliant stairs with an easy grip handrail designed for use by individuals with balance, lower extremity, or walking disabilities. This portable aluminum stair can be adjusted to fit varying threshold heights. It comes in 3-step and 4-step models, each with a landing and two handrails. The landing has holes for drainage. DIMENSIONS: 3-step model is 28 inches high with four 7-inch risers; 4-step model is 35 inches high with five 7-inch risers. Leg height

Durabak Detectable Warning Mat

The Durabak Detectable Warning Mat is a detectable warning surface designed for use as a tactile warning system for pedestrians who are blind or have low vision. This suface is designed to be applied to an existing surface to make it compliant with the Americans with Disabilities Act (ADA). It is a permanent single-piece mat with truncated domes, molded in resilient rubber. The mats come pre-coated with 3 coats of Durabak, a slip-resistant, flexible polyurethane safety coating. The bottom of the

Durachair 1000

Durachair 1000 is a geriatric chair with wheels. The chair has a furniture-grade PVC tubular frame that provides support without sharp edges; a multi-position backrest and multi-position legrest that operate independently; non-absorbent waterproof fabric covers; twin wheel casters; and a safety belt. DIMENSIONS (HxLxW): 48 x 48 x 24 inches. Casters are 4 inches in diameter. WEIGHT: 38 pounds. COLOR: White frame. Fabric or solid vinyl upholstery is available in a variety of colors.

Duralast Detectable Warning Plate

The DURALAST Detectable Warning Plate is a detectable warning surface designed for use to provide tactile warning of potential danger to pedestrians or transit passengers who are blind or have low vision. This surface-mounted, square or rectangular iron plate has a surface pattern of raised bumps. It is locked in place with underside bolts. DIMENSIONS (LxW): 24 x 18 inches; 24 x 24 inches; or 30 x 24 inches. COLOR: Gray.

Duralast Radial Detectable Warning Plate

The DURALAST Radial Detectable Warning Plate is a detectable warning surface designed for use to provide tactile warning of potential danger to pedestrians who are blind or have low vision. The plate has a radial shape, based on a radius of either 10 or 15 feet, for use in a curb ramp. Its surface has a pattern of raised bumps. This surface-mounted iron plate is locked in place using underside bolts. It is available with no coating or powder coated. DIMENSIONS (LxW): 18.81 x 24 inches. COLOR: Gr

Duraswing Mk 4R On-Demand Door Operator

The DuraSwing MK 4R On-Demand Door Operator is a powered door operator designed for use by individuals with mobility disabilities. This door operator unlocks, power opens, holds open, power closes and re-locks doors. It can close doors automatically or on demand. It works with interior and exterior doors up to four feet wide that latch when closed, including wheelchair lift gates and elevator swing doors. It can operate in either an in-swing or out-swing configuration, can be configured for righ

Duratek

Duratek tile is a detectable warning surface designed to provide tactile warning of possible danger to individuals who are blind or have low vision. Applications include curb ramps and pedestrian crossings, transit platforms and bus stops, store entrances, parks and recreational areas, building access areas, and temporary ramps. These heavy duty tiles are pressure molded into rigid, solid plates with tactile surfaces using the preferred truncated dome design. Tiles are lightweight and transport

Duratek-Ci

Duratek-CI is a detectable warning surface designed for use to provide warning of potential danger to pedestrians who are blind or have low vision. This detectable warning tile has a solid cast iron plate with a truncated domes design. Applications include curb ramps and pedestrian crossings, transit platforms and bus stops, store entrances, parks and recreational areas, and building access areas. Cast-in-place installation is helped by the tiles slim undercarriage. Fasteners are built into the

Duro-Matic Door Hinge

The Duro-Matic Door Hinge is designed to provide easier access through narrow doorways for people who use wheelchairs. Replacing the existing hinges with these brass hinges adds two inches of clear space to the doorway. INSTALLATION: Uses the existing screws and holes.

Dw Dots

DW Dots is a detectable warning surface designed to provide tactile warning of danger to pedestrians who are blind or have low vision. The surface features a pattern of raised domes that can be felt by a pedestrian. The surface can be installed onsite after the walking surface is installed or cured, or it can be installed offsite in a marble, granite or paver stone prior to a tile installation. It can be installed in any spacing pattern. DW Dots are made with precise tolerances and appearance. D

Dwyer Ada Kitchen Series - Elevated Refrigerator Design (Models Sae0735Bhr, Sae0765Bbr, Sae0795Bbr, Sae0825Bbr, Sae0855Bbr, Sae0885Bbr, Sae091Bbr, Sae0945Bbr, & Sae0975Bbr)

The Dwyer ADA Kitchen Series - Elevated Refrigerator Design, is an accessible kitchen with an elevated refrigerator, designed for use by individuals with arthritis or other disabilities that make it harder to bend over to reach lower shelves. The standard unit includes upper and lower cabinetry with bail style handles, post-formed laminate countertop, built-in upright refrigerator/freezer, 2-burner Ceran cooktop, range hood, drop-in stainless steel sink and Dwyer limited swing faucet. Except in

Dwyer Signature Ada Series

The Signature ADA Series is a kitchen with accessible components designed for use by individuals with lower extremity or mobility disabilities, spinal cord injury, short stature, or other physical disabilities. This kitchen system includes a large-capacity, frost-free upright refrigerator; electric surface burners; sink bowl; single- lever faucet; and exhaust hood. The Adaptable Sink Base converts to meet Americans with Disabilities Act specifications and the folding design stores components an

E-Z Access Ramp (Models Raez0110, Raez0120, Raez0130, Raez0140, Raez1110, Raez1120, Raez1130, Raez1140, Raez1510, Raez1520, Raez1530, Raez1540, Raez2150, Raez2160, & Raez2170)

The E-Z Access Ramp is a ramp designed for use by individuals with mobility disabilities or spinal cord injury. The ramp has a 1:12 slope and can be installed on any surface at interior or exterior thresholds. It has a slip-resistant, scuff-resistant surface, and can be cut to exact size and covered with carpet. DIMENSIONS (HxLxW): 7/8 x 6 x 42 inches (model RAEZ0110), 7/8 x 6 x 60.5 inches (model RAEZ0120), 7/8 x 6 x 69.5 pounds (model RAEZ0130), 7/8 x 6 x 78.5 inches (model RAEZ0140), 1.25 x

E-Z Pull Door Closer

The E-Z Pull Door Closer is a door closer designed for use by individuals with mobility or walking disabilities or spinal cord injury. This unit enables the user to close any size door behind him or her while using a walker, wheelchair, or mobility scooter. The device consists of a unit that snaps onto the door handle, and an acrylic hook that is applied to the door to pull it shut. WARRANTY: Lifetime warranty replaces any unit damaged through normal use.

Easy Access Drawers

DO IT YOURSELF ENTRY --- PURPOSE: To make the contents of a drawer more readily accessible to people who cannot reach into the drawer or see its contents. Remove a portion of one side of a drawer so a person can reach and see into the side of the drawer. TOOLS: Saw. SKILLS REQUIRED: Woodworking. TITLE: Easy Access Drawers. WEB SITE: Assistive Technology Solutions at http://www.atsolutions.org/devices/easy_access_drawer.htm. REF: Assistive Technology Solutions can be contacted at PO Box 3071, Bur

Easy Bath

Easy Bath is a walk in bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. This tub features a low entry and is twice as deep as a standard tub. It is available with either a left- or right-hand door. It has a built-in, anti-slip, contoured seat; a built-in safety bar; and Giovanni chrome fixtures and drain assembly. DIMENSIONS: Entry is 6 inches high. COLOR: White. WARRANTY: 10-year warranty and a lifetime guarantee on the tub door seal.

Easy Bath Plus

Easy Bath Plus is a walk in whirlpool bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. This walk in tub with a low entry has multiple adjustable speed massage jets. It is available with either a left- or right-hand door, and comes with a built-in, anti-slip, contoured seat; a built-in safety bar; and Giovanni chrome fixtures and drain assembly. DIMENSIONS: The entry is 6 inches high. COLOR: White. WARRANTY: 10-year warranty and a lifetime guarant

Easy Bathe Walk-In Bathtub

The Easy Bathe Walk-In Bathtub is a walk-in bathtub designed for use by individuals with mobility or balance disabilities. Designed to fit most bathrooms, this tub features a guaranteed leak-free design and compact footprint; a low-level entry; a wide access door with a choice of right or left entry; an integral safety handle; a contoured, slip-resistant seat and backrest; height-adjustable showerhead; and, temperature-controlled hot water. The unit is available in corner or back-to-wall configu

Easy Comfort Lift Chair (Model Lc200)

The Easy Comfort Lift Chair, model LC200, is a seat lift and recliner chair designed for use by individuals with physical or mobility disabilities. The chair has a two-position all-electric lift and reclining mechanism with a button control, which either tilts the user back to rest, or rises to help the user stand. The chair has a hardwood frame, a heavy-duty steel lift mechanism, and a wide seat with soft fabric. POWER: Uses household current, with integrated emergency battery backup. CAPACITY:

Easy Exit.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: An extra handle is placed toward the hinge side of a door to facilitate closing it when an individual is in a wheelchair. A closed loop type of handle is installed in the hinge side of a door. Door closing can be initiated without going back into the doorway. SKILLS REQUIRED: Assembly. AUTHOR: Walter Zell TITLE: Household Items for Easier Living. REF: Journal article: Accent on Living, Summer 1980: p 62. 1980.

Easy Gentleman Swing Door Opener (Interior Doors)

The Easy Gentleman Swing Door is a pneumatically opened & closed swing door operator kit designed to convert side-hinged doors to automatic doors to provide barrier free access for people with mobility issues. The converter allows manual use of the door by those not requiring the automatic opener. Designed for interior residential doors, this operator is mounted to the push side of the door and both sides of the cylinder are pressurized during the entire cycle. The standard includes the Pneu

Easy Living 48 Inch Shower (Model Xst4836 Bf .5 Curbless)

The Easy Living 48 Inch Shower, model XST4836 BF .5 CURBLESS, is a one piece gel-coat 48 inch curbless roll-in shower with bult-in grab bar designed for use by individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars. A half-inch steel reinforced threshold is standard. This model offers a six-inch tile finish with diamond accents, a textured slip resistant floor, a leg ledge, and soap/shampoo ledges. The half- inch tri-cell wa

Easy Living 48 Inch Shower (Model Xst4836 Sh 4.0 Low Threshold)

The Easy Living 48 Inch Shower, model XST 4836 SH 4.0 LOW THRESHOLD, is a one-piece gel-coat shower with built-in grab bar designed for use by individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars. A half-inch steel reinforced threshold is standard. This model offers a low, step-over four-inch dam, a six-inch tile finish with diamond accents, a textured slip-resistant floor, a leg ledge, and soap/shampoo ledges. The half-inc

Easy Living 48 Inch Shower (Model Xst5038 Bf .5 Curbless)

The Easy Living 48 Inch Shower, model XST5038 BF .5 CURBLESS, is a one-piece gel-coat shower with built-in seat and grab bar designed for use by individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars. A half-inch steel reinforced threshold is standard. This model also offers a four-inch tile finish with diamond accents, a textured slip-resistant floor, a double wall leg ledge, and soap/shampoo ledges. The half-inch tri-cell

Easy Living 60 Inch Shower (Model Xss 6032 Sh 4.0)

The Easy Living 60 Inch Shower, model XSS 6032 SH 4.0, is a one piece gel-coat shower with built-in seat and grab bar designed for use in assisted living, nursing home, and healthcare facilities serving individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars. This model offers a low four-inch step-over dam, a six- inch tile finish with diamond accents, a textured slip-resistant floor, a tall bench seat, and seat-height soap/s

Easy Living 60 Inch Shower (Model Xst 6033 Sh 4.0)

The Easy Living 60 Inch Shower, model XST 6033 SH 4.0, is a one- piece gel-coat 60 inch shower with a built-in seat and grab bar designed for use in assisted living, nursing home and healthcare facilities serving individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars. This model offers a four-inch low step-over dam, a six-inch tile finish with diamond accents, a textured slip-resistant floor, and seat-height soap/shampoo ledg

Easy Living 60 Inch Shower (Model Xst 6038 Bf 2.0)

The Easy Living 60 Inch Shower, model XST 6038 BF 2.0, is a one- piece gel-coat roll-in shower designed for use in assisted living, nursing home, and healthcare facilities serving individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars. A two-inch curbless threshold is standard. This model offers a six- inch tile finish with diamond accents, a textured slip resistant floor, and soap/shampoo ledges. The half-inch tri-cell wall

Easy Toilet Riser

The Easy Toilet Riser is a toilet riser designed to elevate a toilet for people with mobility or balance disabilities. This unit attaches to the floor and is designed to fit toilets with a base that is 14 inches or less in length. The unit is constructed of ridged poly vinyl chlorate and elevates the entire toilet by 4 inches. It is easy to clean and can be used in homes or commercial facilities. The unit comes with two 6-inch closet bolts, two wax rings, one extended water pipe, two washers, tw

Easy Turn Lampswitch Kit (M0Del Nc28750)

The Easy Turn Lampswitch Kit, model NC28750, is a lamp switch extension lever designed to assist people with limited hand strength or grasp in turning lamps on and off. The kit extends the length of the turning knob and provides a large triangular knob for ease in grasping and turning. DIMENSIONS: 1.75 inches in diameter.

Easyeye Floor Lamp

The EasyEye Floor Lamp is a low vision light designed for use by individuals with low vision. This lamp includes an lonizer Air Purifier that is activated when the light is turned on. It has an adjustable gooseneck and a swivel head. The light uses a 27 watt fluorescent bulb (included) with an anti-reflective lens designed to reduce eyestrain and glare. Other features include energy efficient flicker free electronic ballast. DIMENSIONS (HxDxW): 48 x 10 x 9 inches.

Eclipse Residential Elevator

The Eclipse Residential Elevator is a home elevator designed for use by individuals with mobility disabilities or who use wheelchairs. This elevator can travel up to 60 feet, with up to six stops. Safety features include a stop switch; battery-powered emergency lowering and lighting; hand crank for manual lowering; motor brake; lockable control panel; elevator door interlocks; stop switch in car; in use indicator lights on hall stations; and, slack chain brake system. Other standard features inc

Eco Ada Compliant Dishwasher

The Eco ADA Compliant Dishwasher is a below counter dishwasher designed for use by individuals who use wheelchairs. This diswasher fits beneath ADA-compliant counters, as well as standard counters, and is full-size inside. Adjustable legs allow for under counter alignment and leveling to accommodate standard counters as well. Installation is simplified because the drain hose and electric supply cord come pre-connected. This device is Energy Star rated and uses 4.2 gallons of water per load. Feat

Economy Bed Pad

The Economy Bed Pad is a bed pad and incontinence pad designed for individuals with incontinence. This pad is made with a quilted top cloth for absorbency and comfort combined with a waterproof liner. The pad provides protection for every-night mattress use or on household furniture. The pad can be machine washed and dried. COLORS: Light blue top with white liner.

Economy Grab Bars (Models H112, H116, H118, H124, H132, H132L & H132R)

The Economy Grab Bars are grab bars designed for use by individuals with balance or mobility disabilities. All models are made of steel with a polyester coating. The mounts are coated with soft plastic brushing. Models H132L and H132R are 90-degree angle grab bars available for right or left mounting. DIMENSIONS: Model H112 is 12 x 4.75 inches; model H116 is 16 x 4.75 inches; model H118 is 18 x 4.75 inches; model H124 is 24 x 4.75 inches; model H132 is 32 x 4.75 inches; model H132L is 32 x 4.5 i

Economy Hand-Held Shower (Model A830001)

The Economy Hand-Held Shower, model A830001, is a handshower with flexible hose designed for use by individuals with spinal cord injury or mobility or balance disabilities. The unit fits over the tub faucet and is equipped with a flexible vinyl hose. A suction lock wall bracket is included. DIMENSIONS: The unit fits faucets with outside diameter of 1.375 inch to 1.75 inches and the hose is 60 inches long.

Economy Shower Stall (Model Ess-1)

The Economy Shower Stall, model ESS-1, is a portable shower designed for use by individuals who cannot access a conventional bathroom. The stall requires no permanent installation or electrical or water connections, enabling it to be moved as needed, and it can be used for showering or as a privacy enclosure for a commode. The stall features replaceable vinyl shower curtains on all four sides for privacy. Other standard features include a shower unit with an electric pump for dispensing water fo

Economy Tub Rail

The Economy Tub Rail is a grab bar for bathtub designed for use by individuals with balance or mobility disabilities. The bar is made of chrome-plated steel with rubber pads on all tub contact points. Knurling around grab bar diameter provides a permanent no-slip grip. DIMENSIONS: 8 x 11 or 7 x 17 inches. WARRANTY: Limited lifetime warranty.

Ed 800 Series Door Control

The ED 800 Series Door Control is a door closer and powered door operator designed to provide the level of assistance required by the user for safe, barrier-free passage. The ED 800 is a combination surface closer and microprocessor-controlled electromechanical unit which continuously monitors door position, resistance, opening and closing speeds, and other variables, detecting the slightest deviation from the norm and responding appropriately. The unit functions as a standard door closer until

Effect 5000

The Effect 5000 is an alternating air pressure mattress surface designed to prevent pressure sores for people with lower extremity, mobility, or severe physical disabilities or spinal cord injury. This mattress overlay is placed on the regular mattress on a bed. It comes in a single bed or hospital bed size. If placed on a king sized bed, it covers half the bed. POWER: Uses 110-volt AC. OPTIONS: 12-volt to 110-volt AC inverter for use in a van. WARRANTY: One year warranty.

Elastic Mesh Side Rail Protectors (Model 5707 & 5707H))

The Elastic Side Rail Protectors, model 5707 and 5707H, are side rail pads designed to prevent injury from entrapment in bed side rails. This product features pads for two side rails connected by a one-piece under-mattress section. Each pad covers a rail and fills the gap between the rail and the mattress. Designed to fit most healthcare facility beds, these machine-washable covers stretch to fit the rails, expand and contract during bed positioning, and allow access to control buttons. DIMENSIO

Electric Can Opener And Knife Sharpener

The electric can opener and knife sharpener is a kitchen tool for teens and up, who have a hard time using a regular can opener. This product would be ideal for those who have a disability that affects their motor skills and for persons with arthritis. Twist-Off cutting lever for easy cleaning. Built-in manual knife sharpener. Cord storage. Opens cans up to 6 ½ inches height. COLOR: White. DIMENSIONS: 8 ½ inches height x 4 3/8 width x 4 5/8 depth.

Electrical Room Sign With Braille (Model Rre-945)

The Electrical Room Sign with Braille, model RRE-945, is a braille and tactile sign designed for use by individuals who are blind or have low vision. The sign features a stylized drawing of a bolt of lightning, with an arrow point at the end, above the phrase, "Electrical Room," in raised text with the Grade II braille equivalent of that phrase printed just below the text. The sign provides visual, tactile and Grade 2 Braille information. It has an acrylic core with a laser-engraved top color /

Electro Melt System.

Automatic snow melting and anti-icing system for concrete pavement in driveways, sidewalks, steps and ramps. Heating cables are cut to length on site and imbedded in concrete. Self regulating to provide heat only where needed. Field repairable if cables are cut or damaged.

Electronic Toilet Flush Valve (Model 44-911)

The Electronic Toilet Flush Valve, model 44-911, is a toilet flushing aid designed for use by individuals with Alzheimers disease or cognitive disabilities who forget to flush the toilet, or by individuals with grasping, fine motor, or upper extremity disabilities. This electronic module can be used to retro-fit an existing toilet. When it detects the presence of the user, it enters stand-by mode. The toilet flushes when the user leaves the detection area. The unit also flushes the toilet automa

Elevated Bathtub Seat

Elevated Bathtub Seat is designed for children and adults with physical disabilities who have difficulty sitting in a tub or standing in a shower. The open front and coccyx dimple in the back provide access for personal hygiene. Additional features include smooth, rounded corners for comfort, a finger indent handle for transport and suction cup feet for stability. DIMENSIONS: 13 x 15 ½ x 8 1/2” (33 x 39 x 22 cm) CAPACITY: Supports up to 400 lbs. (181.8 kg) WEIGHT: 4 ½ lbs. (2kg) WARRANTY/GUA

Elevated Crib

CUSTOM ADAPTATION PURPOSE: To enable an individual with a spinal cord injury to care for her baby. A standard wooden crib with a drop front was purchased and adapted. First the legs were exended using matching wood to provide the necessary wheelchair clearance. The drop front was then removed and cut in half to form two gates. Once the front corner posts were reinforced with steel brackets, the gates were attached with swinging bar hinges. The gates stay open until they self-close after an init

Elevating Chair

CUSTOM ADAPTATION PURPOSE: To enable an individual with muscular dystrophy to rise from a chair independently. The user required a chair that would raise him almost to a standing position and enable him to wiggle off the seat while adjusting the height as needed. A commercially-available swiveling, reclining armchair was purchased and mounted on a castored steel base equipped with a motor, gearbox, and power screw. A square metal tube frame was added to the base to support the chair, retaining

Elevating Shower Trolley

Wheeled trolley can be used as stretcher to transfer person from bed, can be lowered for wheelchair transfer. Waterproof shower mattress has built in pillow, sides raise with side rails. Control panel has thermostat, shower hose and low sink for use under drain hole at end of mattress. Can be tilted to side for cleaning.

Elevator

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with mobility or neurological disabilities to enter a back porch without climbing the porch stairs. Two metal sliding uprights were bolted to the concrete floor of the porch and anchored to the underside of the roof overhang. The actual elevator was built of square tubing with a platform to stand on. A screen was placed on the elevator floor to provide a nonslip surface. A switch was wired in and a safety gate was attached. The elevator i

Elevator Control Panels With Braille

Elevator Control Panels with Braille are tactile signs for use in elevators designed to comply with Section 4.10.12(2) of the ADA. These signs identify floors, alarms, emergency stop buttons, telephone, and other button messages. Several styles are available. Style ECP12 ($9.05 ea) contain 1 or 2 Braille characters only. Style ECP15 ($13.00 ea) show 1 or 2 English characters above 1 or 2 Braille characters. Style ECP26 ($21.40) are slightly larger signs with the following legends available: Alar

Elevette 2100 Convenience Elevator

The Elevette 2100 Convenience Elevator is a home elevator designed for use by individuals with mobility disabilities. This elevator can be placed in a shaft or freestanding. Cab features include an aluminum frame with custom snap-in panels in a variety of hardwoods, laminates, or acrylics; a choice of an aluminum collapsible gate or an accordian gate in wood and/or acrylic, and automatic safety devices. The drive system is available with a winding drum, monorail HydraRide, or CD2200 winding drum

Elevette 3400 Style Elevator

The Elevette 3400 Style Elevator is a home elevator designed for use by individuals with mobility disabilities. This elevator can be placed in a shaft or freestanding. Cab features include smooth walls with square, flush corners; a choice of an aluminum collapsible gate or an accordian gate in wood and/or acrylic, and automatic safety devices. The drive system is available with a winding drum, monorail HydraRide, or CD2200 winding drum and hydraulic system. DIMENSIONS: Standard sizes are up to 1

Elevette Elegance Elevator

The Elevette Elegance Elevator is a home elevator designed for use by individuals with mobility disabilities. This elevator can be placed in a shaft or freestanding. Cab features include a choice of raised or recessed panels, solid wood with hardwood veneer center panels, a choice of an aluminum collapsible gate or an accordian gate in wood and/or acrylic, and automatic safety features. The drive system is available with a winding drum, monorail HydraRide, or CD2200 winding drum and hydraulic sy

Elite Winding Drum Home Elevator

The Elite Winding Drum Home Elevator is a home elevator designed for use by individuals with mobility disabilities. It has a winding drum drive with a nominal operating speed of 40 feet per minute, programmable solid state controls, an A-style Sierra prewired cab, and two to five stops with up to 50 feet of travel. The machine is installed either adjacent to the elevator shaft or overhead. POWER: Uses household current with battery for emergency lowering and lighting. DIMENSIONS: Available with

Ellison Balanced Door

Exterior door. 42 inch wide door with balanced door type made of bronze, aluminum, wood, or stainless steel and tempered glass. Complete hardware included. Optional kickplate. Standard hardware accessible. Has a quick bottom rail height with optional power or manual closer.

Elmira Elevator

The Elmira Elevator is a home elevator designed for use by individuals with mobility disabilities or spinal cord injury. This compact elevator fits virtually any new or existing home or floor plan. It is available with custom cab configurations. Integrated safety locks protect against the door opening without cab present. POWER: Uses electrical current. An emergency 24-volt direct current (DC) battery backup provides lowering, lighting, and door unlocking in the event of a power outage.

Elongated Wall Hung Top Spud Bowl (Models 25-030 & 25-031)

The Elongated Wall Hung Top Spud Bowl, model 25-030, is a tall toilet designed for use by individuals with mobility disabilities. This toilet has a wall waste outlet, a spud for the flushometer valve, and a siphon-jet. The vertical rough in (the distance from the floor to the center of the waste drain) can be adjusted to increase the height of the installed toilet. Model 25-031 has a bedpan rim. A seat is not included. DIMENSIONS (HxDxW): 13 x 25.5 x 14.5 inches. The vertical rough in is 7.25 in

Elvoron Mr In-Line Drive Home Elevator

Elvoron MR In-Line Drive Home Elevator is an interior elevator designed to provide multi-level access in private residences for people with limited mobility, mobility disabilities and spinal cord injuries. There is a choice of two drive systems available; hydraulic or in-line (machine room-less). The hydraulic drive system offers a control system and a quiet operation. An area outside the elevator hoist-way is required to accommodate the controller and the hydraulic pump unit. This area can b

Elvoron Stella Home Elevator

The Elvoron Stella home elevator by Garaventa Lift is an interior elevator with the look and feel of a commercial elevator. It is designed to provide multi-level access in private residences for people with limited mobility and mobility disabilities. It features automatic horizontal sliding elevator doors in either stainless steel or other finishes. The walls and fixtures can be customized for the user.

Embossed Braille Identification Plates

Embossed Braille Identification Plates are tactile door jamb signs that indicate floor designations for hoistway entrances of elevators and for doors. The plates are available with one printed and one Braille character (style DJ3, $16.10 ea) or two printed and two Braille characters (style DJ4, $17.05 ea). The plates are made of .040 aluminum. DIMENSIONS: One character plates are 2.5 x 3.5 inches; 2 character plates are 3.75 x 3.5 inches. COLOR: Numerals are printed in white on a black backgroun

Empower Walk-In Bathtub

The Empower Walk In Bathtub is an accessible bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. This walk-in tub is the length of a standard bathtub, with a side door and a contoured bath seat. After entering the tub and sitting on the seat, the user turns a handle to seal the door and open the taps. After the tub is filled, the user presses a button to be gently lowered into the water. After bathing, the user presses the button again to be raised

Endurant Receptor Ramp

The Endurant Receptor Ramp is a shower ramp designed to make shower stalls accessible to individuals with mobility or lower extremity disabilities or spinal cord injury and others who use wheelchairs. The ramp offers a transition between the floor and a BioPrism shower base receptor (sold separately). The ramp has a non-skid, textured surface which helps prevent slips and falls. It is manufactured from a solid pour of BioPrism solid surface. DIMENSIONS (WxL): 12 inches wide; up to 72 inches long

Engraved Plastic International Symbol Sign - Handicap (Models 364L, 364M, & 364S)

The Engraved Plastic International Symbol Sign - Handicap, models 364L, 364M, and 364S, is a tactile access sign designed to indicate that an area is accessible to wheelchair users and other individuals with disabilities. The sign is plastic with a raised International Access Symbol (a stylized figure in a wheelchair). Signs are individually packed in a poly bag, and come with double-sided pressure sensitive tape for fastening. OPTIONS: Fastening screws. DIMENSIONS (HxW): 6 x 6 x 0.13 inch thick

Engraved Plastic Sign - Men/women With Handicap (Models 352M & 352W)

The Engraved Plastic Sign - Men/Women with Handicap is a tactile access sign designed for us in indicating that a bathroom is wheelchair accessible. This plastic sign has the international Access symbol, a stylized figure in a wheelchair, with the words Men (model 352M) or Women (model 352W) in a Helvetica font. The sign is available with double-sided pressure sensitive tape or screws for fastening. DIMENSIONS (HxW): 2.5 x 7 x O.125 inch thick. Letters are 0.75 inches high. COLOR: Brown with whi

Engraved Symbol Of Access Signs

Engraved Symbol of Access Signs Setonply signs are designed for identifying restrooms and exits equipped for persons with disabilities. Each has the international access symbol on the right hand side, and a printed message on the left: Men, Women, Restroom, and Exit. MOUNTING: Signs are supplied with pressure sensitive adhesive for mounting to most surfaces. DIMENSIONS: 12 x 4 inches. COLOR: White lettering and symbols on blue background.

Enlightened Pedestrian Pushbutton Crosswalk Signal

The Enlightened Pedestrian Pushbutton Crosswalk Signal is a pedestrian signal control switch designed for use in crosswalks with signals that change by pedestrian request. The system includes a Superbrite LED that lights when the user presses the system's pedestrian push button to request a crosswalk signal. By lighting when the pedestrian presses the button to place a crossing request, then going off when the walk cycle is initiated, the Superbrite LED provides important information to the user

Entrance Sign With Braille (Model Rre-185)

The Entrance Sign with Braille, model RRE-185, is a braille and tactile access sign designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury, or who are blind or have low vision. The sign features the International Access Symbol, a stylized drawing of a figure seated in a wheelchair, above the word, "Entrance," in raised text with the Grade II braille equivalent of that word printed just below the text. An arrow above the figure points to the left. The

EntryLevel Landing

EntryLevel Landings are accessible thresholds designed for use in commercial and public buildings to provide access for individuals who use wheelchairs. This modular, pre-fabricated unit is made from 100-percent recycled materials and is installed with high-grade adhesive to provide a solid door threshold transition. COLOR: The unit is available in color options that match the original substrate or to provide a visual color cue for pedestrian safety. DIMENSIONS: All models are 60 inches wide; av

Envirodor (Re) & Securitidor (Rs).

Revolving door large enough to accommodate wheelchairs. Fully automatic, requires no pushing, pushbutton for handicapped or elderly use slows down the door to 50% of normal rotation speed (from 5-6 rpm's to 2-3 rpm's).

Ergo-Comfort Adjustable Footrest (Models 2105 & 2106)

The Ergo-Comfort 5-Inch and 8-Inch Adjustable Footrest, models 2105 and 2106, is a footstool designed for use by individuals with lower extremity or circulatory disabilities. This adjustable footrest elevates the feet of a user sitting in a chair. The angle foot pad can be moved on the frame to improve circulation by allowing repositioning of legs and feet while the footrest is in use. The unit has a steel frame with a vinyl covered footpad. DIMENSIONS (HxDxW): is 5 x 11.5 x 18.5 inches (Model 2

Ergo-Wise Foot Rest (Model 6105)

The Ergo-Wise Foot Rest, model 6105, is a footstool designed for use by individuals with circulatory disabilities or those who spend long periods sitting at a desk. This foot rest is ergonomically designed to support proper posture, and relieve stress on the legs, back, and neck. Features include textured rollers that move automatically allowing the user various leg positioning options, angle adjustment knobs that tighten to stabilize the platform in a desired tilt position. The knobs can be loo

Ergobar

The Ergobar is a bathtub grab bar designed for use by individuals with balance or mobility disabilities. This all-acrylic grab bar is made of 100 percent industrial-grade acrylic and it comes in a variety of standard or custom shapes and sizes. COLORS: Available in the same shades as the acrylic sheets used by bathtub manufacturers, or in custom colors.

Ergolife Tablet Dining Table(Model Gc3-42)

The Ergolife Tablet Dining Table, model GC3-42, is a wheelchair accessible table designed for use in cafeterias or in family, common, activity or dining room settings in long term care facilities and hospitals. The table is pre-drilled so an optional tablet can be attached on any side for wheelchair access. Tops are available in solid hardwood, melamine, or high pressure laminate. The legs are heavy duty steel. DIMENSIONS (HxDxW): 29.5 x 42 x 42 inches. Custom heights are available.

Ergonomic Office Chair With Headrest

The Ergonomic Office Chair with Headrest is an adjustable office chair designed to provide, neck, back, and head support for individuals while working at a desk. Ergonomically designed, this chair features pneumatic seat height adjustment, 360-degree swivel, tilt tension adjustment, and tilt to lock chair in upright position. A two-to-one synchro-tilt (back reclines at two-to-one ratio to seat angle) allows the user to recline while keeping seat cushion relatively level to the floor. Other feat

Ergonomic Plastic Reacher with Rotating Claw

The Ergonomic Plastic Reacher with Rotating Claw is a reacher designed for individuals who have trouble bending or those individuals confined to a wheelchair to grab objects in hard to reach places. Rotates vertically and horizontally. Rubber tips. Metal magnet to hold small metal objects.

Ergotek Plus 32 inch Folding Reacher

The Ergotek Plus 32 inch Folding Reacher is a folding reacher designed for people with difficulty reaching and bending or for individuals confined to a wheelchair or for individuals with upper extremity disabilities to allow these persons to grab things in difficult places to reach. Can be rotated 90 to 180 degrees.

Escape Walk In Tub (Models Ltow5030 & Ltowj5030)

The Escape Walk In Tub, models LTOW5030 and LTOWJ5030, is a walk-in bathtub designed for use by individuals with mobility disabilities. This single-piece tub is made of fiberglass with a polyester gelcoat finish, and is available with a right- or left-hand drain. Features include waste/overflow, safety assist bar, standard valve, tub filler, and hand shower package. Model LTOWJ5030 has air and water jets. OPTIONS: Wall surround; curtain and rod; and tile accenting. DIMENSIONS (HxDxW): 37.75 x 30

Eslate Disabled Access Unit (Model Dau 5000)

The eSlate Disabled Access Unit, model DAU 5000, is a voice output and switch-accessible voting machine designed for use by voters who are blind or have low vision or who have severe physical or upper extremity disabilities. This voting machine has interfaces for head movement and sip and puff switches, which enable individuals with severe physical disabilities to cast their ballot using only head movement or their breath. An audio ballot reader includes audible signals that provide confirmation

Essential Bath Safety Plus Bathtub Safety Bar (Model B3200)

The Essential Bath Safety Plus Bathtub Safety Bar, model B3200, is a grab bar for bathtub designed for use by individuals with arthritis or balance or lower extremity disabilities. Made of enamel-coated steel, this rounded A-shaped bar offers two levels of support. A rubber-padded clamp adjusts to secure the bar to tub walls. DIMENSIONS: The steel bar is one-inch in diameter and the clamp fits tub walls 3 to 7 inches wide.

Essential Bath Safety Plus Grab Bar (Models B3212, B3216, B3218, & B3224)

The Essential Bath Safety Plus Grab Bar is a wall grab bar designed for use by individuals with balance, mobility, or lower extremity diisabilities, arthritis, or spinal cord injury. Made of enamel-coated steel, the bars have round mounting plates and include stainless steel mounting hardware. DIMENSIONS: Model B3212 is 12 inches long, model B3216 is 16 inches long, model B3218 is 18 inches long, and model B3224 is 24 inches long. All models are one-inch in diameter and mount 1.5 inches from the

Euro-Tub Walk-In Bathtub

The Euro-Tub Walk-In Bathtub is an accessible whirlpool bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. This tub provides a deep soak in a hydrotherapy spa system. Features include an anti-slip floor and seat; right- or left-mounted door; 16-jet hydrotherapy spa with hot temperature maintainer; thermostatic mixing valve control unit; hand-held shower head; curtain rod and matching shower curtain. DIMENSIONS (HxLxW): 41 x 49 x 26 inches. The door

Eurotech Adjustable Intensive Task Chair

The Eurotech Adjustable Intensive Task Chair is an office chair with height adjustment designed for use by individuals who require position changes throughout the day. This seat is designed to provide ergonomic comfort, tension control, and lumbar support for individuals who sit at a desk all day. The seat is covered in 100 percent olefin fabric and has a thick foam cushion. Other features include pneumatic height control; a swivel, tilt seat; an adjustable-height ratchet back; independent back

Eva-Dry Home Dehumidifier

The Eva-Dry Dehumidifier is a dehumidifier that is designed to help persons who have allergies or for anyone who is adversely affected by the presence of moisture in musty places. This basement dehumidifier is very small but powerful enough to service an area of 250 square feet. Protects homes from growing mold spores and moisture-liking bacteria. Does not need water poured into it because it automatically grabs the moisture out of the air through non-toxic water-glass crystals inside the home d

Evacupod Overlay (Models Evp 1 & Evp 100)

The Evacupod Overlay, models EVP 1 and EVP 100, is an emergency evacuation system that serves as a foam mattress overlay when not in use. The Evacupod Overlay is made of pressure-relieving, visco-elestic memory foam covered by quilted, 4-way stretch antimicrobial sheeting. It attaches to the mattress of a standard hospital bed with four elastic straps that fit over the mattress corners. In case of emergency, the Evacupod Overlay is detached from the mattress and secured around the user using thr

Evoassist

Evoassist turns an iPhone, iPod touch or iPad into a universal environmental control device. It is designed for use by individuals with limited mobility due a spinal cord injury, neurological injury or illness. It is designed to be accessible via touch screen or input switches. Evoassist is designed to integrate seamlessly with RSLSteeper’s comprehensive range of home automation systems. This product provides users with independent and total control of their environment while using a mainstream

Excel 50+ Modular Homes

Excel 50+ Modular Homes are prefabricated houses designed for use by seniors or individuals with physical disabilities. The modular process allows builders to construct multiple units and larger facilities at lower cost. All home types can be customized with accessible design plans.

Executive Ergonomic Task Chair

The Executive Ergonomic Task Chair is an adjustable office chair designed for use by individuals who require position changes throughout the day. This chair is designed to provide lumbar support for individuals who sit at a desk for long periods. Features include a lock tilt swivel mechanism, gas lift height adjustment, seat pitch adjustment, back height and pitch adjustments, and 7-position adjustable height armrests. DIMENSIONS: The overall height is 46.5 to 50 inches. Seat (WxD): 20 x 19.5 in

Exit Ada Sign

The Exit ADA Sign is a braille sign designed for use by individuals who are blind or who have low vision. The sign shows a pictogram of a figure running out a door, with the word Exit in sans serif lettering and braille. The sign is made of high impact styrene with a non-glare surface and can be used outdoors or indoors. Double-faced adhesive tape is included on back for mounting. DIMENSIONS (HxW): 9 x 6 inches. Signs are 1/8 inch thick with 0.5-inch radius corners. Pictograms, borders, letterin

Exit Devices (90 Series)

Panic bars come in wide and narrow style, including concealed and surface vertical rods, rim and mortise. All crossbar assemblies are brass, bronze, stainless steel, or steel.

Exit Sign & Exit Route Sign (Models Caext69 & Caexrt4534)

The Exit Sign, model CAEXT69, and the Exit Route Sign, model CAEXRT4534, are braille and tactile signs designed for use to mark exits in a way that can be read by individuals who are blind or have low vision. Each sign has tactile raised letters and/or symbols with Grade II Braille. Both models are rectangular in shape. The Exit Sign (CAEXT69) has a stylized human figure running towards a door above the word "EXIT." The Exit Route Sign (CAEXRT4534) has only the words "EXIT ROUTE." Signs come wit

Exit Sign With Braille (Model Rre-655)

The Exit Sign with Braille, model RRE-655, is a braille and tactile sign designed for use by individuals who are blind or have low vision. The sign features the word "Exit" in raised print with the Grade II braille equivalent just below the print. It has an acrylic core with a laser-engraved, .03125-inch top color and tactile layer and a matte finish for improved visibility. Each sign includes permanent adhesive tape with removable backing for mounting. DIMENSIONS (HxW): 4 x 6 inches. COLOR: Ava

Extend A Hand

Extend A Hand is a wall grab bar designed for use by individuals with balance and mobility disabilities. Suitable for use in tubs and showers, near toilets, in hot tub areas, and more, this bar installs directly to existing wall studs and features a C-shaped horizontal extension for additional leverage and assistance. The extension locks in place with push-button releases. The extension can be left permanently in position or flipped up and out of the way when not in use. DIMENSIONS: 11 x 12, 16

Extensions For Cabinet Knobs.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Pull handle for a drawer or cabinet door for someone who has difficulty using small knobs. Pull handle made of a large electrical ring tongue, plastic coated cable and a piece of soft rubber hose. This is held in place by the knob itself. Includes drawings. SKILLS REQUIRED: Assembly. AUTHOR: Independence Factory TITLE: Make it Cheap: Volume 3 REF: Middletown, Ohio: Independence Factory NARIC CALL NUMBER: R1183 PAGES (including cover): 2 1977.

Extra Care Bariatic Bed (Models 4054Sd & 4054Sdx)

The Extra Care Bariatric Bed, models 4054SD and 4054SDX, is a motorized, reinforced bed designed for use by individuals with obesity and severe physical disabilities or spinal cord injury. This bed features a two-piece frame with powered height adjustment, fowler backrest and leg lift. Model 4054SDX also has powered Trendelenburg and reverse Trendelenburg. It has a battery backup and a standard remote control. OPTIONS: Scale system; over-bed trapeze transfer aid; bariatric mattress; bolsters; s

Extra Care Bariatric Patient Room Recliner (Models 7150 & 7155)

The Extra Care Bariatric Patient Room Recliner, models 7150 and 7155, is a reinforced recliner chair designed for use by individuals with obesity and mobility disabilities or by individuals who require support while sitting. This chair back reclines up to 40 degrees and the leg rest articulates as the back reclines. The manual reclining mechanism is located in the rear of the chair and is intended to be operated by an attendant. The chair also has four locking casters. DIMENSIONS: Model 7150 is

Extra Long Drinking Straw

This Extra Long Flexible Drinking Straw is designed for those individuals confined to a wheelchair or a bed. With its ability to bend in three places, the user may drink while laying down in bed, or from an upright position when sitting in a wheel chair so that those persons will not have to strain their neck, trying to reach the straw, and with this product the individual will not have to hunch down. OPTIONS: Sold in package of 10 or may buy a set of 50 in bulk. To buy this item in bulk, contac

Eye Pillow

The Eye Pillow is a pillow designed to ease eyestrain for individuals who have nervous tension, headache, migraines or insomnia. These flaxseed-filled pillows are shaped to fit snugly around the facial curves and gently press on key acupressure points in the eye area to help eliminate visual stimuli through deep relaxation and repose. The pillow comes with silk casings that have a microwave-safe zipper. The pillows are available unscented or scented with herbs or essential oils. DIMENSIONS (LxW

Ez Boost Power Seats

The EZ Boost Power Seat is a self rising seat that helps individuals who need help getting out of chairs. Self riser gently lowers or raises user and helps relieve stress and strain on joints. No batteries or electricity needed. Foam filling provides seated comfort. Handle makes it easy to move from chair to chair or take when traveling.

Ez Care Coil Mattress (Model Ez-115000)

The EZ Care Coil Mattress, model EZ-115000, is a hospital mattress designed to provide firm innerspring support. The vinyl cover can be cleaned with a mild disinfectant. Perimeter wire allows for full gatch adjustments without breakdown. DIMENSIONS (HxLxW): 6.5 x 80 x 36 inches.

Ez Care Fitted Mattress Cover (Model Ez-115100)

The EZ Care Fitted Mattress Cover, model EZ-115100, is a mattress protector designed for use by individuals with incontinence. This protector is made of waterproof, non-allergenic vinyl and has elasticized edges to keep it in place.

Ez Care Foam Mattress (Model Ez-115020)

The EZ Care Foam Mattress, model EZ-115020, is a foam mattress designed to provide firm support. The vinyl cover is easily cleaned with a mild disinfectant.

Ez Care Height Adjustable Overbed Table (Model Ez-110550)

The EZ Care Height Adjustable Overbed Table, model EZ-110550, is designed to provide eating and work space for individuals who are in bed for extended periods or who use wheelchairs. This height-adjustable table has an open frame base to slide under the bed or for wheelchair accessibility. The table has a laminate top and an H-frame base with four swivel casters. It can be turned for either right- or left-hand use. The height is adjusted using a one-touch release lever, and gentle pressure on th

Ez Care Height Adjustable Pivot And Tilt Overbed Table (Model Ez-110500)

The EZ Care Height Adjustable Pivot and Tilt Overbed Table, model EZ-110500, is designed to provide eating and work space for individuals who are in bed for extended periods or who use wheelchairs. This table has an open frame base to slide under the bed or for wheelchair accessibility. It has a laminate top and a C-frame base with four swivel casters. The table is supported by a height-adjustable column that angles upward toward the user from the right side of the frame. The table top tilts to

Ez Care Home Care Bed

The EZ Care Home Care Bed is a motorized bed designed for use by people with severe physical or mobility disabilities or spinal cord injury. This fully electric bed can be raised and lowered at three independent points, the head, knee and foot, and the entire bed can raised and lowered to facilitate transfer. Trendelenberg and reverse Trendelenberg positions can be attained. By moving all three independent areas, the head/foot gatch can be raised or lowered. FRAME: The frame splits into independ

Ez Care Mattress Cover With Zipper (Model Ez-115200)

The EZ Care Mattress Cover with Zipper, model EZ-115200, is a mattress protector designed for use by individuals with incontinence. This protector is made of waterproof, non-allergenic vinyl and has a zippered closure to keep it in place.

Ez Care Pressure Relief Mattress (Model Ez-115050)

The EZ Care Pressure Relief Mattress, model EZ-115050, is a foam mattress designed for use by individuals at risk for pressure sores or ulcers. This pressure-relieving mattress is made of two layers of foam. The diagonally-cut foam top layer reduces pressure and friction, and the resilient firm foam base provides support and comfort. The mattress has a durable, zippered, waterproof, antimicrobial cover. The mattress and cover are latex-free.

Ez Care Side Rails (Model Ez-110100)

The EZ Care Side Rails, model EZ-110100, are hospital or home care full-length bed side rails designed for use by individuals with spinal cord injury or mobility disabilities. The rails install without tools on most split spring beds. The rails are made of 1-inch diameter chrome-plated steel, and they telescope to adjust to the length of the bed.

Ez Care Side Rails (Model Ez-110110)

The EZ Care Side Rails, model EZ-110110, are heavy-duty half-length hospital or home care bed side rails designed for use by individuals with spinal cord injury or mobility disabilities. The rails install without tools on either the head or foot of a bed. The rails are made of heavy duty chrome-plated steel.

Ez Care Side Rails (Model Ez-110200)

The EZ Care Side Rails, model EZ-110200, are hospital or home care full-length bed side rails designed for use by individuals with spinal cord injury or mobility disabilities. These rails install without tools on most conventional or adjustable beds. The rails are made of chrome-plated steel, and they expand to accommodate a king size bed.

Ez Door Closer

"DO IT YOURSELF" ENTRY --- PURPOSE: To enable wheelchair users to close the door behind them. To make this door-closing aid, drill holes to install the eye hooks in three separate locations: at the top corner of the door,.at the inside top corner of door frame, and at the center of door frame. Tie one end of the rope to the hook on the door. Thread the rope through the hook on the top door frame. Thread the rope through the eye hook on the center of the frame. Attach a bracelet or other handle

Ez Edge Ramp System (Models Raez0010, Raez0020, Raez0030, Raez0040 & Raez0050)

The EZ Edge Ramp System, models RAEZ0010, RAEZ0020, RAEZ0030, RAEZ0040 and RAEZ0050, is a threshold ramp designed to provide access for individuals with lower extremity, mobility and walking disabilities, spinal cord injury and others who use wheelchairs. Molded under heat and pressure, these 100 percent recycled rubber, anti-slip ramps feature rounded front edges and molded traction pads and can be planed or trimmed to fit any doorjamb or uneven rise. The ramps may be installed using silicone

Ez Landing Fall Mat (Models 911585 & N911590)

The EZ Landing Fall Mat is a fall mat designed to protect individuals with balance or mobility disabilities. Intended to provide protection for individuals who are at risk of falling out of bed or while entering or exiting the bed, this one-piece mat features trip-resistant beveled edges; a low profile, stable surface; and nano-silver throughout which protects the mat from stains, odor-causing bacteria, mold, and mildew. DIMENSIONS (HxLxW): 1 x 68 x 30 inches or 1 x 68 x 24 inches.

Ez Open Door Latch

The EZ Open Door Latch is designed to aid individuals open screen doors. Features a paddle attachment to help push screen door latch. Slides over your existing screen door latch—no tools needed.

Ez-Access Modular Ramp

The EZ-ACCESS Modular Ramp is a modular ramp designed for use by individuals who use wheelchairs or scooters or who cannot use stairs. The ramp and handrails are made of aluminum, and the ramp has a non-skid surface. The components can be assembled in several configurations that comply with ADA guidelines, including a straight ramp, two sections connected with a 90-degree turn, and two sections connects with a 180-turn. Handrails can be installed on both sides of the ramp in all configurations.

Ez-Access Rollup Ramp

The EZ-Access Rollup Ramp is a portable ramp designed for persons with physical disabilities who use wheelchairs and scooters. Designed to bridge gaps over one step or a curb, the ramp features a durable, non-skid driving surface. The detachable side rails add support and act as a guide for maximum safety. Made of rust-resistant lightweight aluminum, the ramp rolls up for storage in the included nylon bag. DIMENSIONS (LxW): 36 x 30 inches. When rolled for storage, the ramp has a diameter to 6 in

Ez-Access Rubber Threshold Ramp (Models Thr 250-1 & Thr Riser 225-1 Pr)

The EZ-ACCESS Rubber Threshold Ramp is designed for use by persons with mobility disabilities or spinal cord injury who use wheelchairs or scooters. The ramp provides smooth riding over doorway thresholds. Designed for most standard and sliding-door entrances, the ramp is made of rubber from recycled tires. This ramp can be trimmed for lower heights. For thresholds higher than 2.5 inches, risers (model THR RISER 225-1 PR) are available that can be placed under the ramp. DIMENSIONS (HxLxW): 2.5 x

Ez-Access Rubber Threshold Ramp With Beveled Sides (Models Thrw36 150-1)

The EZ-ACCESS Rubber Threshold Ramp with Beveled Sides, model THRW36 150-1, is designed for use by persons with mobility disabilities or spinal cord injury who use wheelchairs or scooters. The ramp provides smooth riding over doorway thresholds. Designed for most standard and sliding-door entrances, the ramp is made of rubber from recycled materials. The ramp can be trimmed for lower heights. DIMENSIONS (HxLxW): 1.5 x 24 x 36 inches (usable surface). The overall width including the beveled sides

Ez-Access Suitcase Advantage Series Ramp (Models As2, As3, As4, As5 & As6)

The EZ-ACCESS SUITCASE Advantage Series Ramp are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface with reflective stripes on each side of the surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to enter some minivans (models AS5 and AS6) and sport utility vehicles (AS

Ez-Access Suitcase Ramp (Models 2, 3, 4, 5 & 6)

The EZ-ACCESS SUITCASE Ramp is a portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. Th1s ramp is made of aluminum and features an non-skid driving surface. The ramp is designed for use over curbs and steps and to enter some minivans (models 5 and 6) and sport utility vehicles (model 6 only). Each ramp has a fold-in-half design for compact portability, and a built-in carrying handle. DIMENSIONS (LxW): 24 x 29 inches (model 2); 36 x 29 inches

Ez-Access Suitcase Signature Series Ramp (Models Ss2, Ss3, Ss4, Ss5, Ss6, Ss7 & Ss8)

The EZ-ACCESS SUITCASE Signature Series Ramps are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to with some minivans, vans and sport utility vehicles. Each ramp divides into two halves by removing two hinge pins, and whe

Ez-Access Threshold Ramp (Models 1, 1.5, 2, 3, 4, 5 & 6)

The EZ-Access Threshold Ramp is designed for persons with physical disabilities who use wheelchairs or scooters. The ramp provides smooth riding over doorway thresholds. Designed for most standard and sliding-door entrances, the ramp is made of durable extruded anodized aluminum and has a long, non-skid driving surface for maximum safety and support. A special finish resists dents and scratches. A flap attachment for sliding door tracks and installation hardware are included. Ramps accommodate t

Ez-Access Trifold Advantage Series Ramp (Models As5, As6, As7, As8 & As10)

The EZ-Access Trifold Advantage Series Ramp is a portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface with reflective stripes on each side of the surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to enter some minivans and sport utility vehicles. Each ramp divides into

Ez-Bathe

The EZ-BATHE is an inflatable bathtub designed for use with individuals with mobility disabilities or who are unable to leave the bed. The user is placed in the deflated tub on the bed using the half sheet transfer method. The 20-gauge vinyl tub Inflates with a vacuum pump in 30 seconds. A hand-held shower head connects to a bathroom faucet and a hose connects to a faucet at a sink or bathtub for filling and draining. The set includes the tub, an inflatable pillow, the hose, the shower head and

Ez-Close

The EZ-Close is a door opener and closer designed to make the process easier for individuals using crutches or a cane. The EZ-Close is a plastic-cup like structure that mounts to the door. It forms a pocket that you can place the tip of your crtch or cane into and pull the door opened or closed. This is ideal inthat is prevents a loss of balance from having to reach for the handle.

Ez-Set Tile

The EZ Set Tile is a detectable warning surface designed for use to provide tactile warnings of danger to pedestrians who are blind or have low vision. This heavy duty replaceable cast-in-place detectable warning tile is a double-reinforced polymer concrete composite with a stainless steel anchoring system,. It is an all season product that can be used in high wear conditions such as transit platforms or shopping cart areas. The tile installs in concrete, and it has a flat bottom surface to elim

Ez-Shower

The EZ-SHOWER is a portable shower designed for use with individuals with mobility disabilities or who cannot leave the bed. Made of mildew-resistant vinyl, the EZ-SHOWER hangs on a bed post or IV pole by the wooden carrying handle or nylon cord and holds 2.5 gallons of water. An easy-fill spout prevents splashing snd snaps shut for watertight seal. The included flexible 4-foot hose has an on/off valve for easy water control. WARRANTY: 1-year limited warranty.

Ezyfold Door Control Arms

Ezyfold Door Control Arms is a door control system designed to create improved access and barrier-free living environments for persons with mobility and other physical disabilities. The system glides bi-fold doors, from cabinets to full size, smoothly, silently and dependably to and from their closed position. When the doors are open, rather than sticking out a 90 degree angle, these doors fold back a full 180 degrees agianst adjacent walls or cabinets and out of harms way. This feature improves

Facility Access Signs

Facility Access Signs are signs with the international symbol of access designed for use on commercial and public grounds and buildings to indicate accessible entrances and areas. Messages written underneath the access symbol include: Access at Side of Building (with right or left arrows), Wheelchair Ramp, Access at Rear, Exit, and Disabled Persons Crossing. DIMENSIONS: 12 x 18 inches, 18 x 24 inches, and 30 x 30 inches. COLOR: All signs have white lettering and arrows on blue background except

Family Restroom Sign Ada

The Family Restroom Sign ADA is a braille wheelchair access sign designed for use by individuals who are blind or who have low vision or mobility disabilities. The sign has the international disability symbol, a pictogram of a man and a woman holding a child by the hand, and the words "Family Restroom" in sans serif letters and braille. The sign is made of high impact styrene with a non-glare surface, and can be used outdoors or indoors. It comes with double-faced adhesive tape on back for mount

Fastaire (Models Hd03, & Hd04)

The Fastaire, models, HD03 and HD04, are electric hand dryers designed for use by individuals with one hand. These warm air hair dryers are easily operated and the direction of air is easily adjusted.

Faucet Extension

The Faucet Extension is a lever tap handle designed to enable users with a weak grip to operate a kitchen or bathroom faucet. The extension lever may also help to make a sink's taps more accessible to wheelchair users. The lever is a strip of stainless steel that has one end bent up to form a vertical handgrip. The unit is bolted into place on top of the existing faucet tap. PROTOTYPE DEVELOPMENT: Designed by John Duffus for users with poor grip strength to increase the leverage, reach, and grip

Faucet Genie

The Faucet Genie, also called Auto Spout SK-FG001, is a hands-free faucet designed for use by individuals with upper extremity disabilities. This unit attaches to existing kitchen, bathroom, or laundry room faucets and is activated by placing the hands under the faucet. The distance between unit and the activation sensor is adjustable. The unit also has a feature that enables continuous water flow for three minutes before it automatically shuts off. POWER: Uses 1 pc lithium battery.

Faux Sheepskin Bed Sore Cover

The Faux Sheepskin Bed Sore Cover is a decubitus pad designed for use by individuals at risk for pressure sores/ulcers and/or incontinence. The sheepskin cover is constructed to keep air flow between the skin and sheets.

Fawssit Foldaway Wheelchair Shower (Models S2000, Ss4040, R3000, T4000, & B5000)

The FAWSsit Foldaway Wheelchair Shower is a portable shower designed for use by individuals who use wheelchairs. This self-contained portable shower stall can be used anywhere there is access to warm water, a drain and an electric outlet. The unit comes completely assembled and no tools are required for set up. The unit has a nylon mesh embedded double-layer vinyl drain pan. The custom design allows for maximum water removal and Velcro strips to hold sides in place. The front folds down for whee

Fibar System

Processed wood fiber surface, consisting of top layer of 12 inches of Fibar wood fiber, a layer of Fibarfelt fabric, to hold the wood fiber in place; a layer of gravel for drainage and another layer of Fibarfelt to hold gravel in place. It is a non-toxic, chemical free, natural colored system that can be installed above or at ground level. 3 year warranty available.

Finestra Walk In Bath

The Finestra Walk In Bath is a walk in bathtub for people with balance, lower extremity or mobility disabilities. The Finestra is available in several configurations that can include water or air jets. All versions of the Finestra include a grab bar; an integrated seat available heights of 17 or 14 inches; an easy access door with magnetic seal and interior handle lock; a slip-resistant bottom; and a chrome rotary drain. It is made of easily cleaned, high-gloss acrylic over an aluminum frame wit

Fire Exit Sign With Braille (Model Rre-275)

The Fire Exit Sign with Braille, model RRE-275, is a braille and tactile sign designed for use by individuals who are blind or have low vision. The sign features a human figure moving away from a flame, in the direction indicated by a pointing arrow. Below is the phrase, "Fire Exit," in raised text with the Grade II braille equivalent of that phrase printed just below the text. The sign provides visual, tactile and Grade 2 Braille information. It is available in standard or metallic acrylic with

Fireguard Doors

FireGuard Doors are accordian type fire doors designed to preserve the architectural beauty of large open rooms and foyers while offering protection from fire and smoke. These doors are placed in the wall, encased in mahogany frames and pocket covers, and are totally hidden from view. They allow one to follow building code requirements and fire safety standards without having to close off rooms or spend lots of money on renovations. The doors work on a patented track and trolley system that supp

First Aid Sign With Braille (Model Rsme-350 & Rsme-350-Sym)

The First Aid Sign with Braille, models RSME-350 and RSME-350-SYM, is a braille and tactile sign designed for use by individuals who are blind or have low vision. The sign has the phrase, "First Aid," in raised print. The Grade II braille equivalent is located just below the text. In model RSME-350-SYM signs, there is a first aid symbol (a Swiss-style cross) to the right of the words; in RSME-350, the words appear without a symbol. The sign has an acrylic core with a laser-engraved top color lay

Fixed And Adjustable Tilt Framed Mirrors (Models 740 & 741)

The Fixed Tilt (##740) and Adjustable Tilt (##741) Framed Mirrors are tilting mirrors designed for use in public restrooms. These mirrors have 18 gauge stainless steel frames with Heliarc welded corners and 20 gauge angle stiffeners wleded to the frame for additional rigidity. The backs of the mirrors are 20 gauge galvanized steel, secured to the frame with concealed screws. The mirrors are 1/4-inch float glass, triple silver plated with an electro-copper plated layer and thermosetting infrared

Fixed Position Shower Seat (Models 712 & 712H)

Corner mounted shower seat of 16 gauge stainless steel, satin finish. Overall dimensions are 15 1/2 inches by 15 1/2 inches by 22 inches with 1 inch lip. Seat height determined by wall mounting. Model 712h ($188.95) is hinged.

Fixed Position Tilt Mirror (Model B-293)

The Fixed Position Tilt Mirror, model B-293, is a tilting mirror designed to provide easy visibility for persons in wheelchairs. This mirror has a stainless steel frame with float/plate glass mirror. The top of the mirror extends 4 inches from wall and tapers to 1 inch at bottom. DIMENSIONS (HxW): 30 x 16 inches; 30 x 18 inches; 36 x 18 inches or 36 x 24 inches. WARRANTY: 15 year warranty.

Fixed Ramp For Trains

The Fixed Ramp for Trains is a rail car ramp designed enable wheelchair users to enter and exit trains. The ramp set-up consists of three main elements: a Stepless Lite Ramp (see separate entry); a mechanical arm that is attached to the ramp and holds it in position; and a free-standing cabinet to store the ramp when it is not in use. When not in use, the ramp is folded width-wise and placed in the cabinet by the door. The mechanical arm allows train staff to operate the ramp and make it ready f

Flex-A-Bed Hi-Lo Series Adjustable Bed (Series 185)

The Flex-A-Bed Hi-Lo Series Adjustable Bed, series 185, is a motorized bed designed for use by individuals with mobility, respiratory, digestive, or severe physical disabilities or spinal cord injury. This bed enables the user to raise the head and feet independently or simultaneously, and the bed height is adjustable. Features include a choice of a wired or wireless hand-operated pendant control; an innerspring mattress in a choice of soft, medium, or firm; a high-density foam foundation; and r

Flex-A-Bed Premier Adjustable Bed (Model 790)

The Flex-A-Bed Premier Adjustable Bed, model 790, is a motorized bed designed for use by individuals with mobility, respiratory, digestive, or severe physical disabilities or spinal cord injury. This bed enables the user to raise the head and feet independently or simultaneously. Features include a choice of a wired or wireless hand-operated pendant control; wood trim panels over metal frame and the mattress retainer at the foot of the bed; an innerspring mattress in a choice of soft, medium, or

Flex-A-Bed Value-Flex Adjustable Bed (Model 158)

The Flex-A-Bed Value-Flex Adjustable Bed, model 158, is a motorized bed designed for use by individuals with mobility, respiratory, digestive, or severe physical disabilities or spinal cord injury. This bed enables the user to raise the head and feet independently or simultaneously. Features include a hand-operated pendant control; mattress retainer at the foot of the bed; an innerspring mattress in a choice of soft, medium, or firm; locking casters; Bioguard treatment of mattress fabrics to inh

Flex-Ramp

The Flex-Ramp is a van ramp designed for use by individuals with mobility disabilities. This lightweight aluminum ramp converts a mini-van or full-size van into a wheelchair-accessible vehicle. The ramp is attached to the floor of the vehicle and extended outward when the door is opened. It can also be detached from the floor and moved to another location such as a curb or steps. OPTIONS: Two wheel cart for transporting ramp. SIZES: Mini-van, full-sized van, or extra capacity. DIMENSIONS (LxW):

Flexible Corner Guards

The Flexible Corner Guards are designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. The protectors offer a low profile appearance for minimum design interruption, and protect wall corners from dents and scratches. These protectors feature smooth, stain finish and can be installed with heavy duty adhesive. Available wing angles are 90 and 135 degrees. Angles can be adjusted plus or minus 10 degrees for installation on irregular corners. DIMENSIONS: W

Flexigrip (Model 6090)

FlexiGrip, model 6090, is a bed transfer aid designed for use by individuals with mobility disabilities. This eight-handle transfer aid can be used when getting out of bed or when making transfers. It is made from soft nylon that resists soiling, and can be fitted at the foot end of the bed using a loop. DIMENSIONS (LxW): 175 x 9 centimeters.

Flextable (Model A)

The FlexTable, model A, is an adjustable height tilt top table designed for use by individuals with lower extremity or mobility disabilities and others with special seating needs. This table, which is designed to accommodate four people, has four height-adjustable work stations mounted on the ends and each side of a rectangular base. The side stations also tilt. The end stations are removable. The base rests on 4 4-inch lockable casters so the table can be positioned as needed. DIMENSIONS (LxW)

Flextable (Model B)

The FlexTable, model B, is an adjustable height tilt top table designed for use by individuals with lower extremity or mobility disabilities and others with special seating needs. This table, which is designed to accommodate six people, has six height-adjustable work stations mounted on a rectangular base, one on each end and two on each side. The side stations also tilt. The end stations are removable. The base rests on 4 4-inch lockable casters so the table can be positioned as needed. DIMENS

Flextable (Model C)

The FlexTable, model C, is an adjustable height tilt top table designed for use by individuals with lower extremity or mobility disabilities and others with special seating needs. This table, which is designed to accommodate eight people, has eight height-adjustable work stations mounted on a rectangular base, one on each end and three on each side. The side stations also tilt. The end stations are removable. The base rests on 4 4-inch lockable casters so the table can be positioned as needed.

Flint-Worry Eater

Flip A Grip Folding Support Handle

The Flip a grip folding support handle is designed for individuals that have balance difficulties, anyone with poor special awareness, or those who need a little extra help walking through doorways. This product glows in the dark so it is visible in the dark when those with visual impairment may benefit from its use. It mounts on doorways or on the stairs or between a door and a screen door. Product can be folded away when not needed. Latex-free non slip grip.

Flood Buzz

The Flood Buzz is a flood alarm designed for use with individuals with cognitive disabilities or Alzheimer's disease. This sensor can be placed on the floor near a toilet or bathtub, and it will sound a loud (95 decibels) alarm when it comes in contact with water on the floor created by an overflow or leak. This flood alarm can also be used to detect leaks near washing machines and hot water heaters. DIMENSIONS: Diameter is 1.5 inches. POWER: Includes a non-replaceable battery estimated to last

Floor Mounted Tub Rail (Model 3236)

The Floor Mounted Tub Rail ##3236 is a stainless steel wall to floor grab bar for the bathtub. The support consists of a U-shaped hand bar that mounts at two points to the wall, and two vertical bars attached to the underside of the hand bar that extend to and mount in the floor on either side of the tub. Due to this construction, this model may be especially suited for island tubs. This grab bar is available in 4 concealed or 4 exposed mounting styles. DIMENSIONS (WxDxH): 36,40, 42, or 48 inch

Florlift Multi-Level Vertical Lift (Models Fl-100, Fl-102, And Fl-105)

The Florlift Multi-Level Vertical Lifts (Models FL-100, FL-102, and FL-105) are interior wheelchair lifts designed to provide access between floors for people with physical disabilities or limited mobility. PLATFORM UNIT: Model FL-100 measures 34 x 60 inches and operates through a trap door in the floor that opens and closes automatically. Model 102 lift can be installed in a shaft for open platform loading and measures 32 x 90 inches. Model FL-105 is a totally enclosed short rise platform lift

Flume Bathtub

---- PROTOTYPE --------- PURPOSE: To design a prototype of a accessible tub that can pivot to facilitate tranfers in and out by individuals with lower extremity, balance or mobility disabilities or spinal cord injury. The Flume (seesaw) bathtub has a unique design based on principle of playground seesaws and slides while keeping the safety of individuals with mobility disabilities in mind. The Flume’s point of entry can be tilted downward so that it is easy for an individual to move his or her b

Flush Mount Stainless Steel Corner Guard

The Flush Mount Stainless Steel Corner Guard is designed to protect wall corners from damage by wheelchairs, walkers, and other mobility devices. It is intended to provide impact protection for use in kitchens, sanitary or other high abuse areas; and it offers minimum design interruption by creating a smooth transition from wall to corner. Both Type 304 and Type 430 are available in standard 16-gauge stainless steel. It is installed with screws. DIMENSIONS: Wing sizes are available in 2 or 3 inc

Fold-A-Way Ramp (Model D-Far-120)

The Fold-A-Way Ramp, model D-FAR-120, is a pair of folding tracks designed for use by individuals with in wheelchairs. Tracks have a slip-resistant surface for traction. Each ramp track comes with two handles for positioning and can be folded for storage. DIMENSIONS (HxLxW): Each track is 4.25 x 120 x 7 7/8 inches. CAPACITY: 550 pounds. WEIGHT: 77 pounds per pair.

Foldable Shower Seat (Model 9404)

The Foldable Shower Seat, model 9404, is a shower seat designed to mount directly to the wall of the shower for use by individuals with lower extremity, mobility, and balance disabilities who have difficulty standing in the shower. The seat folds down against the wall when not in use. The seat has a horseshoe design for hygiene. DIMENSIONS: The seat height can be adjusted from 20 inches to 23 inches and is 16 inches x 16 inches. When folded the seat is 5 inches wide. CAPACITY: The weight capac

Folding Aluminum Ramp

The Folding Aluminum Ramp is an accessible folding ramp designed for use by individuals who use wheelchairs or scooters. Made of anodized aluminum, this ramp is trimmed at the edges with a coarse finish strip to the side to prevent slippage. The build up of ice is prevented by treads that are slotted to facilitate drainage. This ramp comes with a handle and locks and can be stored in the back of a car. DIMENSIONS: Available is 3 inches, 4 inches, and 5 inches.

Folding Bed Wedge

The Folding Bed Wedge is a positioning wedge designed for use by individuals with respiratory or circulatory disabilities. Made of lightweight, breathable polyurethane foam, this wedge can be used to support the upper body or the knees and lower legs. A washable polyester velour cover is included. DIMENSIONS (LxW): 24 x 24 inches unfolded, 24 x 12 inches folded; 9.5 inches high at the top when unfolded, 10 inches high folded. WEIGHT: 3.5 pounds.

Folding Ramp

The Folding Ramp is a portable ramp designed for use by people who have lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. It is intended to help a person to get over vertical barriers. The ramp is made of aluminum with an anti-slip tread surface and safety curbs. It folds for carrying or storage. DIMENSIONS: Standard lengths is 3 to 6 feet, and standard width is 30 inches. Custom sizes are available. WARRANTY: 10 years.

Folding Seat (Model 8210)

Folding shower seat with stainless steel frame and naugahyde seat. Mounted on 3/8 inch marine plywood base, projection 23 inches, overall size 32 by 20 inches. Folds up against the wall.

Folding Shower Chair

The Folding Shower Chair is a folding shower seat designed for use by individuals with mobility or balance disabilities. This height-adjustable chair has an epoxy polyester lacquered steel frame and an injection-molded polypropene seat and back with an embosed anti-slip pattern. The seat can be inclined forward to assist people with limited joint mobility in the knees and hips and can be ordered with or without a recessed cutout for personal hygiene. Height adjustment is accomplished by means of

Folding Shower Seat (Models 956 & 9561)

The Folding Shower Seat ##956 and ##9561, is a wall mounted shower seat designed for public facilities that folds up and out of the way when not in use. The frame is made of 18 gauge stainless steel tubing with Heliarc welding. The Wall bracket is made of 16 gauge stainless steel with piano hinges. The retaining bracket is 11 gauge stainless steel with a positive bullet-type catch designed to hold the seat securely in an up or down position. The seat is blow-molded polyethylene that will not ret

Folding Shower Seat (Models B-517 & B-518 )

The Folding Shower Seat, models B-517 and B-518, is a wall-mounted folding shower seat designed for use by people with balance, lower extremity or mobility disabilities. It has a stainless steel tubular frame and mounting brackets, and it features a self-locking mechanism. The seat is L-shaped and is foam-padded, water-resistant naugahyde seat with an enclosed plywood base. DIMENSIONS: Seat is 32.875 inches wide and 1.5 inches thick; when extended, it projects 22.6875 inches from the wall. CAPA

Folding Shower Seat (Models B-5181 & B-5191)

The Folding Shower Seat, models B-5181 and B-5191, is a wall-mounted folding shower seat designed for use by people with balance, lower extremity or mobility disabilities. It has a stainless steel tubular frame and mounting brackets, and it features a self-locking mechanism. The seat is available in an L-shape (model B-5181) or rectangular shape (B-5191). The seat is constructed of durable, water-resistant solid phenolic with slats for drainage. DIMENSIONS: Seat is 33 inches (model B-5181) or 18

Folding Teakwood Shower Seat (Model 9559)

The Folding Teakwood Shower Seat ##9559 is designed to be wall mounted in the shower and to fold up and out of the way when not in use. The frame is made of 18 gauge stainless steel tubing with Heliarc welding. The seat is made of 3 handrubbed teakwood slats with rounded edges. The wall bracket is made of 16 gauge stainless steel with piano hinges, and the retaining bracket is 11 gauge stainless steel with positive, bullet-type catch to hold the seat securely in an up or down position. MOUNTING:

Foldover 1:6 Low Floor Bus Ramp Er7 Series

The FOLDover 1:6 Low Floor Bus Ramp ER7 Series is a bus ramp designed for use by individuals with mobility disabilities. This electric ramp is made of stainless steel and aluminum alloy. It has a 1:16 slope and provides access to low floor buses with a floor height of 12 inches or less. A stainless steel chain and counterbalanced ramp platform allow for manual deployment or stowage. Its mechanism and controls are water resistant. An electro-magnetic latch system secures the ramp in the stowed p

Foot Flusher

The Foot Flusher is designed for use by individuals with limited use of their upper extremities or limited coordination and balance of their lower extremity while flushing the toilet. Step 1: Gather Materials. Materials: 2 Paper Towel Rolls. 1 Wire Hanger. 1 Kiwi Express Shoe Shiner (or similar). 1 Package of 3M (I used the "Utensil Hooks" but technically any one of these Command Strip products will work - more on that later). 1-5 Rubber Bands. Some tape or glue.

Foot Free Pillow

The Foot Free Pillow is a wedge pillow and blanket support designed for use by individuals who cannot bear the weight of blankets on the feet or who have sensitive skin. This pillow is designed to create a free space at the end of the bed between the covers and the mattress to allow free foot movement. The pillow can also be used as a back or arm rest. The inner lining and outer cover are made of polyester and the pillow is made of durable polyurethane foam. It is washable by hand. DIMENSIONS (

Foot Rocker Foot Rest (Model 2122Bl)

The Foot Rocker Foot Rest, model 2122BL, is a footstool designed for use by individuals with lower extremity or circulatory disabilities. The footstool's rocking action encourages leg movement to promote circulation and muscle activity. It has a rock-and-stop design that provides subtle position stops. It is made of vinyl-covered MDF with anti-skid feet. DIMENSIONS (HxDxW): 3.5 x 11.5 x 17.5 inches. WEIGHT: 4 pounds. COLOR: Black.

Fox Cabrail System

The Fox CabRail System is composed of adjustable cabinet units for kitchens, offices, bedrooms, and other applications requiring adaptable and accessible cabinetry. Available units include office desks and computer stands, file cabinets, oven units, stovetop cooking units, night stands and vanities, countertops, stackable drawer units, closet systems, and bathroom sink and vanity units. The units are designed to make efficient use of space while still making the cabinet contents accessible. For

Franklin Brass Ada Grab Bars (Model 5736, 5742, & 5748)

Franklin Brass ADA Grab Bars are wall grab bars designed for use by individuals with balance or mobility disabilities. The bar is made of 18- gauge, type 304 stainless steel tubing with a round flange for concealed mounting. Stainless steel Philips head screws are included. DIMENSIONS: All models have an outside diameter of 1.25 inches with 1.5 inch wall clearance. The bar is available in 12, 16, 18, 24, 30, 36, 42, or 48 inches long. The flange is 3 inches in diameter. CAPACITY: 500 pounds. COL

Franklin Brass Shower Seat With Phenolic Slats (Model 5404Lh & 5404Rh)

The Franklin Brass Shower Seat with Phenolic Slats is a folding shower seat designed for use by individuals with balance or lower extremity disabilities or arthritis. This seat is made of solid phenolic resin with laminated wood grain, 14-gauge stainless steel tubing, and 12-gauge stainless steel mounting brackets. The seat folds up against the wall when not in use, and is available in left-hand (mode l5404LH) or right- hand (model 5404RH) configuration. DIMENSIONS: The mounting heightis 19 inch

Franklin Brass Swing Up Bar (Model 5215)

The Franklin Brass Swing Up Bar, model 5215, is a wall-mounted grab bar designed for use by individuals with balance or mobility disabilities or spinal cord injury. Made of 18-gauge stainless steel with a knurled gripping surface, this bar swings out from the wall and is curved to provide upper and lower gripping surfaces. It comes with a stainless steel wall retaining clip to secure its upright position. DIMENSIONS: The 1.25-inch diameter bar projects 30 inches off the wall. CAPACITY: 500 pound

Freestanding Shower Support Railing

CUSTOM ADAPTATION PURPOSE: To provide shower support for people with mobility and balance disabilities who do not or cannot have rails installed in the bathroom for the toilet or shower. Freestanding rails are adapted for use in the shower to provide support and an overall feeling of safety. Freestanding rails used as a toilet rail system are adapted by using 25 millimeter (mm) stainless steel tubing to add new rails at 1065 mm above the floor. Non-slip foam tubing is glued to the upper rails,

Freewill Barrier-Free Transfer Shower Module (Models K-12100 & K-12101)

The Freewill Barrier-Free Transfer Shower Module is an accessible roll-in shower module with built-in seat and grab bars, designed for use by individuals with mobility disabilities or spinal cord injury. This one-piece acrylic shower stall has an integral soap ledge, brushed or polished stainless steel grab bars, a fold-up seat on left (model K-12101) or right (model K-12100), molded-in floor pattern, and pit installation option. DIMENSIONS (HxLxD): 84 x 45 x 37.25 inches. Inside dimensions are

Frette Crib

The Frette Crib is a circle bed designed for use with infants with cognitive or severe physical disabilities. Designed to promote infant safety and provide an unrestricted view for the developing child, this metal crib offers easier child access to parents and eliminates the dangers of sharp corners found on standard cribs. The crib has a hand-forged iron dome and drop-side access and includes a high-density foam mattress. OPTIONS: Bedding and linens watterproof pad, and mattress pad. DIMENSIONS

Fridge Lock

CUSTOM ADAPTATION PURPOSE: To provide customized childproof refrigerator lock for a child with autism that can be easily opened by an adult, but not allow for the child to accidentally lock himself inside the refrigerator. The final design includes two purpose-made pad bolts mounted in metal boxes on top of the refrigerator and freezer doors. The bolts are spring-loaded to make them extend and engage in a slot in a plate which is mounted between the bolts on the top of the fridge cabinet and pr

Friendly Bed System (Model Eb)

The Friendly Bed System, model EB, is a bed mobility, transfer and positioning aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. The system has a steel framework that fits king, queen or double conventional beds. The frame has two end pieces that are placed beyond a bed’s headboard and footboard (or end if the bed does not have a footboa

Friendly Bed System (Model Fb)

The Friendly Bed System, model FB, is a bed mobility, transfer and positioning aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. The system has a steel framework that fits queen, double, and twin conventional beds. The frame has two end pieces that are placed beyond a bed’s headboard and footboard (or end if the bed does not have a footb

Friendly Bed System (Model Tb)

The Friendly Bed System, model TB, is a bed mobility, transfer and positioning aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. The system has a steel framework that fits twin conventional beds. The frame has two end pieces that are placed beyond a bed’s headboard and footboard (or end if the bed does not have a footboard). The ends ar

Friendly Bed System (Model Tb/hw)

The Friendly Bed System, model TB/HW, is a bed mobility, transfer and positioning aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. The system has a steel framework that fits twin beds with a Hollywood style frame. The system’s frame has two end pieces that are placed beyond the head and foot of the bed. The ends are connected by two pa

Frigidaire Window-Mounted Room Air Conditioner (Models Fam186R2A, Fam156R1A, Fac126P1A, Fas296R2A, Fas256R2A, Fas226R2A, Fac106P1A, & Faa086P7A)

The Frigidaire Window-Mounted Room Air Conditioner is a room air conditioner designed for use by individuals with mobility disabilities. This unit has a full function remote control that allows the user to select temperature and fan speed from a distance. A remote thermostat allows the user to set the temperature at the location of the remote. An antibacterial filter reduces bacteria and other airborne particles. In sleep mode, room temperature is increased by two degrees in the first thirty min

Front-Door Walk-In Bathtub

The Front-Door Walk-In Bathtub is an accessible bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. Its door is located on the front of the bathtub. Other features include an anti-slip surface on the floor and seat; right- or left- mounted doors; a 16-jet hydrotherapy spa with hot temperature maintainer; thermostatic mixing valve control unit; hand-held showerhead; palm door latch; and curtain rod and matching shower curtain. Fixtures can be mounted

Fuelcall

The FuelCall is a call signal system designed for use by gas station customers with disabilities. This system enables customers who need assistance at self-service gas stations to attract the attention of gas station employees. Components include BigBell transmitters (see separate entry) with an oversized touch pads that can be used by customers with limited dexterity; wireless chime receivers; two steel J-shaped mounts for the BigBell transmitters, reinforced to handle abuse; signage for two is

Fun Foot Flush

Foot Flush is a foot-operated toilet flushing aid designed for use by individuals with mobility, upper extremity, or neurological disabilities or arthritis. This device fits most flapper-style tank toilets and does not interfere with the operation of the standard flush handle. Once installed, the device sits on the floor and enables the toilet to be flushed simply by stepping on the unit. This unit has a foot-shaped base, complete with toes.

Furniture Risers

Furniture Risers are leg extenders designed for use by individuals with arthritis, back pain, or mobility or lower extremity disabilities. These leg extenders are designed to make sitting or rising from a couch or bed easier for the user. They are made of plastic with reinforced ribbed construction and include protective non-skid pads to protect the furniture and floor. DIMENSIONS: Raise furniture 3 or 4 inches when used as individual sets or 5 inches when stacked. The width of the 4-inch Risers

Futura Faucet Model 900

Electronic faucet turns on automatically when user's hands enter infrared detection area within bowl perimeter, turns off when hands are removed. Operates at pre-set temperature, either warm or cold water. Heat valve optional. Solenoid has few moving parts. Operation unaffected by most chemicals and minerals frequent in water supplies. Flow constant at all pressures. Self-cleaning diffuser. Chrome-plated, solid cast brass body. Sensor shuts off water after 30 to 45 seconds if something is left i

Galvanized Steel Wheelchair Access Ramp

Galvanized Steel Wheelchair Access Ramps are permanent or semi-permanent modular ramps designed for use to provide access for wheelchairs or scooters to homes, churches, businesses and other public commercial buildings. Each section can be used individually or as a component of a larger wheelchair ramp system. Ramps are made from galvanized steel and with a non-skid surface. Its open grate style allows for dirt, leaves, and other outside debris to fall through the surface, and there is virtually

Garaventa Stair-Lift

The Garaventa Stair-Lift is a wheelchair lift for interior stairway access in multi-story buildings, and some exterior applications. The lift can be configured to fit most straight stairways without any intermediate landings. The system includes a grab rail to assist passengers in entering or exiting the platform, and the Garaventa Intelligent Control System (ICS), an electronic control system designed to simplify wiring and reduce service time. The lift can be operated by the user or an attenda

Garaventa Stair-Lift, Xpress Ii

The Garaventa Stair-lift, Xpress II is an inclined wheelchair platform lift designed to transport wheelchair users up and down a single flight of stairs with two landings. Designed for indoor and outdoor use, this wheelchair lift system consists of two extruded aluminum rails that run along the edge of the stairway, a stainless steel platform with sidewalls, and retractable restraining arms. The platform is available in two different models, 1000 and 1220. Model 1220 is a longer platform. A loa

Garaventa Stair-Trac

The Garaventa Stair-Trac is a portable wheelchair stairlift designed for indoor or outdoor use to allow an attendant to easily move a wheelchair user up and down most stair surfaces. The device fits most crossbrace wheelchairs, and will adapts to a child's narrow wheelchair. The device consists of a folding L-shaped unit with steel belted caterpillar tracks on the botton side to securely grip stairs, auxiliary wheels for flat surface travel, and a handle with the control mechanisms on the uprigh

Garaventa Super-Trac (Model Tre-52)

The Garaventa Super-Trac, model TRE-52, is a portable inclined platform wheelchair lift designed for use by wheelchair users. This lift can be used indoors or outdoors on the stairways of public or residential buildings. Its moving platform design accommodates all types of wheelchairs, including power, children's, sports, and conventional adult wheelchairs. To operate the lift, an attendant guides the user onto the platform in a reverse position. The user is secured on the platform by a series o

Gate Latch

CUSTOM ADAPTATION PURPOSE: To lock the entry gate to a yard in position to provide support for an individual with post-polio syndrome as she negotiated the entry steps. A brace was made to hold the gate open at a 45-degree angle. The brace consists of a metal stay bar attached to a ring fitted into the side brick wall at one end and a short piece bent at a right anfle at the other end. The bent piece fits into a slot drilled into the back of the gate's top bar to lock the gate in position. When

Gatehouse Customizable Access Ramp

The Gatehouse Customizable Access Ramp is a modular ramp system designed for use to provide wheelchair access for individuals with lower extremity or mobility disabilities or spinal cord injury. The system includes a flexible substructure of aluminum and galvanized steel that can be configured to fit specific site layouts, and finished with a variety of decking and railing options, including wood. Available components include Diagonal cross bracing, landings (right turn, left turn, and U-turn),

Gatorgrip Bath Tub Mat

The GatorGrip Bath Tub Mat is a removable slip-resistant coating for bathtubs designed for use by individuals with balance or walking disabilities. This mat is designed for peel and stick application and is suitable for all bathtub and shower types, including metal, porcelain, fiberglass, non-skid surfaces, etc. Designed to be extra-thick and soft, the mat has peel and stick adhesive that seals out mold and mildew, eliminating the need to remove it to clean underneath. The three-dimensional surf

Gatorgrip Sheet

GatorGrip Sheets are removable non-slip surfaces designed for use by individuals with balance disabilities. Each sheet has a peel and stick adhesive backing and a soft, non-slip suface for walking or standing. The sheets are made of a polymer psuedo-rubber that is chemically resistant to mold and mildew. DIMENSIONS (LxW): 42 x 64 inches. COLOR: Beige and white, black and gray, red and black, blue and white, green and white, gray and white, or pink and white.

Ge Tall Tub Built-In Dishwasher (Models Glda696Pss, Glda690Pbb, & Glda690Pww)

The GE Tall Tub Built-in Dishwasher is an undercounter dishwasher designed for use by individuals with mobility disabilities. This dishwasher has nine electronic touchpad controls located on the front for access by wheelchair users. Controls include four cycles and four options, with a two-digit countdown display with two-, four-, or eight-hour delayed start time. DIMENSIONS (HxDxW): 32.35 x 24 x 24 inches. COLOR: Stainless steel (model GLDA696PSS), black (model GLDA690PBB), or white (model GLDA

Gelcoat Special Care Unit (Model Sc4883)

Shower with built in grab bar, adjustable soap-dish and rear corner seat. Seat: 16 by 16 inches, 18 inches off shower floor. Outside dimensions: 48 inches wide by 36 inches deep by 78 inches high. Door size 66 7/8 by 43 7/8 inches. Weight approximately 140 pounds. Fabricated of molded fiberglass. One 18 inch straight stainless steel grab bar mounts vertically on valve wall 31 inches above floor bottom. One 16 inch by 24 inch L shaped grab bar mounts on back wall with long leg installed verticall

Gemini Metal Ada Plaques

Gemini Metal ADA Plaques are braille signs designed for use by individuals who are blind or have low vision. These signs have large restroom symbols (a stylized drawing of a man in pants and/or a woman in a skirt), with the word Restroom(s) in large letters below the symbols and in braille letters underneath. Symbols and letters are available with either a smooth or stippled background. These signs are made of solid aluminum, bronze, or brass. DIMENSIONS (HxWxD): 8 x 6 x .25 inches. COLORS: Male

Genesis Shaftway Vertical Platform Lift

The Genesis Shaftway Vertical Platform Lift is an interior or exterior wheelchair lift designed for use by individuals with spinal cord injury, lower extremity disabilities, or mobility disabilities and others who use wheelchairs. This platform wheelchair lift fits inside a pre-built vertical runway, and can be installed for interior or exterior use. The lift system consists of a drive mast, passenger platform and doors or gates. The platform is enclosed on three sides by galvanized steel panels

Genesis Staage 44 Portable Vertical Wheelchair Lift

The Genesis STAAGE 44 Portable Vertical Wheelchair lift is a wheelchair lift designed for use by individuals who use wheelchairs. This three-wheeled portable lift can be wheeled into place to provide an accessibility solution for low-rise vertical barriers such as stages or podiums. It comes fully assembled for immediate use after setting the upper landing limit to the height required. This lift can reach vertical heights of up to 44 inches. Standard safety features include a lower landing call

Genesys Series Grade 1 Cylindrical Lockset

The Genesys Series Grade 1 Cylindrical Lockset is a door lock with lever handle designed for use by individuals with grasping or upper extremity disabilities or arthritis. This door lock has a full length non-handed lever handle. It has a solid brass 6-pin keyway cylinder and fits doors from 1.375 to 1.75 inches thick, with fixed Thru Bolt Installation and concealed mounting screws. The housing is made from cold rolled steel and zinc dichromate finish for rust resistance with precision cast st

Genoa Motion Activated Clock

The Genoa Motion Activated Clock, JMR868A, is a low vision wall clock and automatic night light designed for use by individuals with low vision. This self-setting atomic wall clock has a large liquid crystal display (LCD) display in either 12- or 24-hour format. The month, day, and indoor temperature is shown in much smaller characters. When motion is detected in a dark room, the nightlight and wall clock backlight temporarily activate. The clock has a daily crescendo alarm and user-selectable h

Gentleman Automatic Swing Door Operator

The Gentleman Automatic Swing Door Operator is a powered door operator kit designed to convert side-hinged doors to automatic doors, enabling access to those with mobility issues. The converter allows manual use of the door by those not requiring the automatic opener. The standard kit includes a Pneumatic opener, Hydraulic closer, Liftmaster MyQ wireless controls, Latch Release Kit, 100’ air tubing, 12 VDC Solenoid, 12 VDC Power Supply, compressor fitting, and mounting hardware. Each kit also in

Gentleman Sliding Door / Pocket Door / Window Operator

The Pocket Gentleman Door Operator is a powered pocket door kit designed to provide barrier free access for people with mobility issues. Although pocket doors create more space for wheel chairs, without automation, many clients are unable to operate the door for desired privacy. The operator allows manual use of the door by those not requiring the automatic opener. This kit includes the custom pneumatic opener integrated with track, Liftmaster MyQ wireless controls, 100 feet of air tubing, 12 VD

Geriatric Tub Bar

Stainless steel U shaped grab bar for end tub wall. 1, 1 1/4 or 1 1/2 inch diameter, 12 inch wall clearance. Exposed or concealed mount. 39 inches wide, 14 inch high sides. Satin finish.

Ghc Universal Access Homes

GHC Universal Access Homes are modular homes designed for use by individuals with mobility disabilities. Twelve universal access floorplans are available, and each can be customized. All doorways are wide enough for wheelchair access with lever handle locksets. Other features include Aker Barrier-Free Shower Stalls with adjustable shower heads, Gerber Elongated Handicap Toilets, stainless steel brab bars, and Merillatt 24-inch bath and kitchen cabinetry. DIMENSIONS: All doors are 36 inches wide.

Ginger Canterbury Grab Bars

Ginger Canterbury Grab Bars are wall grab bars designed for use by individuals with balance or mobility disabilities or arthritis. These heavy-gauge grab bars are forged in solid brass and are available in straight, left- or right-hand L-shaped, and corner configurations with concealed mounting hardware. OPTIONS: Decorative ring. DIMENSIONS: Straight grab bars are 12, 16, 18, 24, 32, 36, 42, or 48 inches long. The bars are 1.25 inches in diameter. COLOR: Antique nickel, polished brass, polished

Ginger Circa Grab Bars

Ginger Circa Grab Bars are wall grab bars designed for use by individuals with balance or mobility disabilities or arthritis. These heavy-gauge grab bars are forged in solid brass. They are available in straight, left or right L-shaped, and corner configurations and come with concealed mounting hardware. DIMENSIONS: Straight grab bars are 12, 16, 18, 24, 32, 36, 42, or 48 inches long. All lengths and configurations are 1.25 inches in diameter. COLOR: Polished brass, polished chrome, satin nickel

Ginger Hotelier Grab Bars

Ginger Hotelier Grab Bars are wall grab bars designed for use by individuals with balance or mobility disabilities or arthritis. These heavy- gauge grab bars are forged in solid brass and are available in straight, left- or right-hand L-shaped, or corner configuration, with concealed mounting hardware. DIMENSIONS: Stright grab bars are 12, 16, 18, 24, 32, 36, 42, or 48 inches long. The bars are 1.25 inches in diameter. COLOR: Polished brass, polished chrome, or satin nickel.

Glide-Out Shelves

Glide-Out Shelves are slide out drawers for cabinets designed for use by individuals who use wheelchairs or who have limited reach. Shelving is custom-built to fit existing cabinets in the kitchen, pantry, bathroom, entertainment center, office, laundry room, or workshop. The shelving glides in and out at a touch, with full extension rails to maximize accessibility and space. Special solutions include blind corners, center stile removal and replacement, custom dividers, riser units for under sin

Glo Mats

The Glo Mats are non-slip stair tread coverings designed for use by individuals with walking or balance disabilities or low vision. Designed for indoor or outdoor use, these plastic glow-in-the-dark floor mats illuminate problem areas such as stairs or darkened hallways or patios. They provide enough light to see, without creating a "bright spot" that may cause a distraction. They feature a non-slip adhesive backing. DIMENSIONS(LxWxH): 7 x 15 x 0.125 inches. WEIGHT: 1.5 pounds.

Glo-Strip Rubber Stair Tread

The Glo-Strip Rubber Stair Tread is a non slip stair tread covering designed to glow in the dark for individuals with a physical or visual disability. The stair tread has a permanent photoluminescent abrasive strip whose lumincescence can be seen after lights cease to operate. This feature helps individuals to evacuate safely on steps in suddenly darkened areas. DIMENSIONS: The strip is two inches wide.

Global Tile (Model Pf2)

Global Tile, model PF2, also called Global Tread, is an anti slip synthetic rubber floor covering for interior or exterior use. Designed for permanent flooring, these heavy duty square-nosed tiles are applied to ramp or stairs with underlayment of wood, metal or concrete. DIMENSIONS: Tiles are 0.19 inches thick, tapering to 0.14 inches, 12.25 inches deep, and 36, 42, 48, 54, 60, or 72 inches long. COLOR: Beige, black, brown, or gray.

Glow In The Dark Gripper (Model 16H162A)

The Glow In The Dark Gripper, model 16H162A, is an illuminated door knob gripper designed for individuals with low vision or fine motor or grasping disabilities. Exposure to bright light or sunlight recharges the power of this device. Illuminating power lasts up to eight hours keeping door knobs visible in a dark room for greater safety.

Glyder Controls

Glyder Controls are lighting control systems designed for use by individuals with physical disabilities. The controls feature a large, slide-to-off dimmer lever, power failure memory and radio frequency interference (RFI) supression. OPTIONS: Pre-set dimmer model is available in addition to a choice of incandescent or magnetic low-voltage lighting. Fan-speed control model is also available. COLORS: White or ivory.

Grab Bar

DO-IT-YOURSELF-ENTRY --- PURPOSE: To assist an individual with mobility disabilities in rising from the toilet. A suction cup was attached to each end of a grab bar. The grab bar was then attached to the front of the bathtub, which faces the toilet. Using a rope attached to the bar, the individual pulls him/herself to a standing position. MATERIALS: Grab bar, suction cups, and rope. TOOLS: Shop tools. SKILLS REQUIRED: Basic shop skills. TITLE: Doing It Yourself. JOURNAL: Quest. REF: Volume 12, N

Grab Bar (Model 3100 K Series Type 02)

Stainless steel grab bar, 48 inches in length or 60 inches. Peened finish for better grip, wall mounted. 1 1/4 inch diameter, 18 gauge stainless steel. Available with concealed or exposed mounting.

Grab Bar (Model 3100 K Series Type-15)

Stainless steel wall to floor Grab Bar; 33 inches high and 30 inches projected out from wall with vertical bar to attach to floor; peened finish for better grip. 1 1/4 inch diameter, 18 gauge.

Grab Bar - Knurled Chrome (Models 1234A, 1234B, 1234C, 1234D, & 1234E)

The Grab Bar- Knurled Chrome is a wall grab bar designed for use by individuals with balance or mobility disabilities. Made of chrome-plated steel, the bar mounts vertically or horizontally. Knurling around grab bar diameter provides a no-slip grip. DIMENSIONS: Length is 12 inches (model 1234A), 16 inches (model 1234B), 18 inches (model 1234C), 24 inches (model 1234D), or 32 inches (model 1234E). Grip diameter is 1.25 inches. The distance from the wall is 1.5 inches. CAPACITY: 250 pounds. WARRAN

Grab Bar - Powder Coated (Models 1244, 1244A, 1244B, 1244C, 1244D, & 1244G)

The Grab Bar- Powder Coated is a straight, wall-mounted grab bar designed for use by individuals with balance or mobility disabilities. The bar is made of powder-coated steel tubing with large 3-hole welded flanges, and can be mounted vertically or horizontally. DIMENSIONS: Length is 12 inches (model 1244), 16 inches (model 1244A), 18 inches (model 1244B), 24 inches (model 1244C), 32 inches (model 1244D), or 36 inches (model 1244G). Tubing is 1 inch in diameter; the frame is 2.5 inches in diamet

Grab Bar For Toilet (Model 3100 K Series Type-04)

L shaped Grab Bar; wall mounted 24 inches above floor; horizontal bar 16 inches long; vertical bar 32 inches long. 1 1/2 inches wall clearance; peened finish for better grip; available for left hand and right hand.

Grab Bar For Wall

Stainless steel grab bar for tub wall. 8 inch extensions for support on each end. 1, 1 1/4 or 1 1/2 inch diameter. Satin finish. Exposed or concealed mount. 36 inches long.

Grab Bar For Wall

Stainless steel corner grab bar for tub wall. 1, 1 1/4 or 1 1/2 inch diameter, 12 inch wall clearance. 8 inch extension for support. Exposed or concealed mount. 34 inches long. Satin finish. Left or right.

Grab Bar For Wall.

Grab bars, outside diameter 1 1/4 to 1 1/2 inches, meets 250 pound stress load, does not rotate in fittings, optional concealed or exposed mounting, smooth safety guard finish. Lengths: straight 24, 36, 42 inches or two different models at 48 inches long. Also l shaped, 36 by 36 inches long.

Grab Bar Series

Wall mounted stainless steel grab bars. Standard and custom styles available.

Grab Bars

DO IT YOURSELF ENTRYPURPOSE: To aid in selecting and installing grab bars for use by individuals with balance, mobility, or lower extremity disabilities. This article, part of a chapter entitled "Bathroom & Washing Up," discusses fit and placement, materials, weight support, and installation of grab bars. AUTHOR: Greenstein, D. TITLE: Grab Bars. BOOK: Easy Things to Make to Make Things Easy: Simple Do-It-Yourself Home Modifications for Older People & Others with Physical Limitations. REF

Graphic Braille Signs

Graphic Braille Signs are tactile facility signs made of acrylic designed to indicate rooms, services, and other features of a building. The signs contain a graphic, English word, and Braille translation for the following: Restrooms, Men, Women, Escalator, Telephone, Stairway, Elevator, Cafeteria, and Lobby. MOUNTING: Signs supplied with double-faced foam tape for mounting. DIMENSIONS: Signs are 8 x 8 inches; letter height is 5/8 inch; graphics area is 6 inches; and Braille is raised 1/32 inch.

Grasspave2

Grasspave2 is a ground retention grid designed for use on grass to allow wheelchairs and scooters--or motor vehicles up to 80,000 pounds--to traverse lawns and other grassy areas without damaging the turf or restricting wheel motion. The grid consists of thin-walled, independent plastic rings connected by an interlocking geogrid structure at their bottom. The rings are rigid while the grid remains flexible to allow the structure to match uneven terrain. The rings act to transfer loads from the t

Grate Ramp (Models D-Aw-88, D-Aw-132, & D-Aw-168)

Grate Ramp is a ramp designed for use by individuals who use wheelchairs. This semi-permanent ramp can be used in high traffic areas such as restaurants, churches, or shopping malls. OPTIONS: Handrails. DIMENSIONS (LxW): 88, 132, or 168 x 36 inches. CAPACITY: 500 pounds. WEIGHT: 118 pounds (model D-AV-88), 177 pounds (model D-AW-132), or 227 pounds (model D-AW-168).

Gravelpave2

Gravelpave2 is a ground retention grid system designed for use on high traffic areas of gravel, small stone, decomposed granite, crushed rock or brick, etc. to allow wheelchairs, scooters, pedestrians, and vehicles to traverse without restricting wheel motion. The grid consists of interconnected plastic rings with a porous fabric backing to retain small aggregate particles. Made of 95 percent recycled post-consumer plastic, the grid is injection molded for uniformity with fabric heat bonded. DIM

Great Grabz Horizon Grab Bars

Great Grabz Horizon Grab Bars are wall grab bars designed for use by individuals with balance or mobility disabilities. The bars are designed to be stylish for residential use. DIMENSIONS: 10, 24, 36, or 42 inches long. Distance from wall to bar is 2.5 inches. COLOR: Polished chrome, polished brass, satin nickel, or wrought iron finish. WARRANTY: Warranted to be free of manufacture defects in material and workmanship for 1 year from date of delivery.

Great Grabz Splash Peak Grab Bar

The Great Grabz Splash Peak Grab Bar is a wall grab bar designed for use by individuals with balance, neurological, or mobility disabilities or lower extremity arthritis. These stainless steel bars have a modern design that rises to a peak, making one end higher than the other; concealed mounting; and twist lock flanges. OPTIONS: SNAPTOGGLE mounting kit. DIMENSIONS: Available in 24 or 36 inches long. These bars are 1.25 inches in diameter and the distance between the wall and the bar is 1.5 inch

Great Grabz Splash Plateau Grab Bar

The Great Grabz Splash Plateau Grab Bar is a wall grab bar designed for use by individuals with balance, neurological, or mobility disabilities or lower extremity arthritis. These stainless steel bars have a modern linear design, concealed mounting, and twist lock flanges. OPTIONS: SNAPTOGGLE mounting kit. DIMENSIONS: Available in 12, 24, 36, or 48 inches long. These bars are 1.25 inches in diameter and the distance between the wall and the bar is 1.5 inches. COLOR: Stainless, polished stainless

Great Grabz Wave Grab Bars

Great Grabz Wave Grab Bars are wall grab bars designed for residential use by individuals with balance or mobility disabilities. The bar has a decorative wave shape. DIMENSIONS: Length is 24 or 36 inches. COLOR: Polished chrome, polished brass, satin nickel, or wrought iron finish. WARRANTY: Warranted to be free of manufacture defects in material and workmanship for 1 year from date of delivery.

Great Grips

Great Grips are door knob or faucet covers designed for use by individuals with arthritis, grasping disabilities, or little or no manual dexterity or strength to open doors or turn faucets. These soft thermoplastic sleeves slip over existing rounded door knobs or faucets. Made of a soft latex-free material, they have a smooth surface to assist in turning. OPTIONS: Built-in AgION antimicrobial, a combination of silver ions bonded to a ceramic material called zeolite; built-in glow-in-the-dark cry

Grid System

High density polyethylene grid, that supports and protects grassy areas with heavy pedestrain or wheelchair traffic from erosion and damage. The grid allows grass to grow through the squares and provides a firm surface to walk on or roll a wheelchair without damaging the ground. It allows heavy water run off without erosion. Interlocking 2 by 2.5 foot pieces.

Gripper Water Faucet Handle (Model 003)

The Gripper Water Faucet Handle, model 003, is a tap turner designed for use by individuals with grasping disabilities, arthritis, Parkinson’s disease, or use of only one hand. This turner attaches over existing tap handles, giving users a gripping area with more leverage. The device features red and blue color-coded indicators that identify hot and cold valves, and two separate grip locks that are compatible with most valve and spigot handles are included. COLOR: White

Grohmix Concealed Thermostat

Thermostatic and pressure balanced water valve for bathtub or shower. Safety stop at 100 degrees fahrenheit.

Groovy Grip Grab Bar (Models H724580016, H724580018, & H724580024)

The Groovy Grip Grab Bar is a wall grab bar for bathroom, designed for use by individuals with balance or mobility disabilities. This wall-mounted plastic grab bar has grooved surfaces to provide a non-slip grasp, even when wet. Mounting brackets conceal the installation screws. Hardware and detailed installation instructions are included. DIMENSIONS: 1.5 inches in diameter. The distance from wall to bar is 2 inches. Availabe lengths are 16 inches (model H724580016), 18 inches (model H724580018)

Gsl Artira Inclined Platform Lift

The GSL Artira Inclined Platform Lift is an interior or exterior wheelchair stair lift designed for use by people with lower extremity, mobility, or physical disabilities or spinal cord injury and others who use wheelchairs and those with limited mobility. This lift can be customized to fit existing stairs and fits straight or curved stairs and can accomodate turning stairways and intermediate landings. The unit folds up when not in use. The platform travels along guide rails mounted to the insi

Guardian Hand Held Shower With Ergonomic Handle (Model 98035)

The Guardian Hand Held Shower with Ergonomic Handle, model 98035, is designed for use by individuals with physical disabilities who require a flexible shower hose to direct the spray while either standing or sitting. This hand-held unit has an extra long hose and an ergonomic handle with a textured surface. The unit provides a choice of standard or pulsating sprays. It installs on existing 1/2-inch shower arm, and comes with a mounting bracket to allow for fixed usage as well as hand held operat

Guide Light 911

The Guide Light 911 is a strobe light and blinking locator designed to guide emergency response personnel to the location from where a “911” call is placed by individuals with physical disabilities, seniors or people who are confined to a bed. The Guide Light has two parts – a transmitter and the strobe light. The transmitter is plugged into an standard telephone jack, and when a “911” call is placed, it transmits a wireless signal to activate the light. The high intensity Xenon strobe light i

Guide Strip

The Guide Strip is a tactile orientation marking, detectable orientation surface, and emergency evacuation navigation aid designed for use by individuals who are blind or have low vision. It is a surface material with grooves that can be detected and followed using a white cane. It serves as a tactile guidance system enabling individuals to track safely to an emergency exit or place of refuge. At transit platform door openings, it can indicate door location and appropriate path of travel. It can

H Base Overbed Table (Models 11600 & 11610)

The H Base Overbed Table, models 11600 and 11610, is an overbed table designed for use by individuals with mobility or severe physical disabilities. The table has a four point H-shaped base with four dual wheel nylon casters, two of which lock. Plastic glides are also included to replace the casters. The table also features spring-loaded height adjustment. DIMENSIONS(LxW): 26.38 x 15.25 inches (base); 30 x 15 inches (tabletop). The height of the table adjusts from 26.75 to 43.25 inches. CAPACITY

Hafele Hewi Lifesystem Hinged Support Rail

The Hafele HEWI LifeSystem Hinged Support Rail is a wall grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. This rail is made of a smooth, non-porous nylon, resistant to cosmetic staining and disinfectants. This single-arm rail lifts up and out of the way when not in use and has a non-slip ergonomic-shaped polyurethane grip for supporting, steadying, and pulling oneself up. The rail is made of epoxy-coated, mat aluminum with chrome plated accents. M

Hafele Hewi Lifesystem Support Shelf

The Hafele Hewi LifeSystem Support Shelf is a bathroom wall shelf with grab bar designed for use by individuals with balance or mobility disabilities. The unit has a non-breakable shelf with raised edge, integrated support handles used for support to stand up independently, and to hold accessories. The support handles are manufactured at an angle of 30 degrees. The unit has an easy-to-clean surface and the mirror can be mounted with the shelf in the center. The shelf has concealed assembly with

Hall Divider For Blind Students

DO IT YOURSELF ENTRY --- PURPOSE: To indicate to blind students and staff in a school hallway that they are moving to the left side of the hall into oncoming students. Apply a colored "tap strip" down the middle of the hall for its entire length. The strip is easily seen by sighted staff, and it returns a distinct sound and feel when tapped by the blind students' canes. TITLE: Hold That Line (in Springboard). AUTHOR: Pfotenhauer, M.. JOURNAL: RE:view. REF: Vol. 36, No. 1, Spring 2004: p. 34. PAG

Hammacher Schlemmer Warm Mist Humidifier

The Hammacher Schlemmer Warm Mist Humidifier is designed for individuals with respiratory disabilities, like asthma, individuals who would benefit from using a humidifier. The Hammacher Schlemmer Warm Mist Humidifier produces warm or cool mist humidification and increases air moisture in areas up to 900 square feet. This humidifier produces ultrasonic vibrations that generate a fine mist, that evaporates. Deeply pitched fan blades and air ducts create a vortex of air that distributes moisture ev

Hammock Swing Seat

The Hammock Swing Seat is a Hammock Swing Seat designed for use by children and adults with physical and neurological disabilities. The hammock-style swing has a lightweight steel frame with a height- and angle-adjustable heavy-duty nylon seat and chest and leg straps with Velcro closure. The swing is shipped assembled and includes chains. DIMENSIONS (LxW): 50 x 24 inches. CAPACITY: 250 pounds.

Hampshire Contoured Tap Rail (Model 09-107-8534)

The Hampshire Contoured Tap Rail, model 09-107-8534, is a bathtub grab bar designed for use by individuals who need support rising from or sitting down in a bathtub. The plastic rail is fixed to taps by means of a clamping bar. Its contoured plastic moldings enhance the user's grip on the rail when raising and lowering. In use, the rail rests on the edges of the tub; the unit may be folded up against the wall when not in use. DIMENSIONS: Max diameter of taps 80mm (31/8"). Distance of bar from ta

Hand Dryer (Model 0110 R)

Electric Hand Dryer, 115 volts, 15 amps. Also available in 230 volts, 10 amps-0113 R. Available in recessed model(0115R) or surfaced mounted model- (0101). Universal type motor 1/100 horse power, and life lubricated, fully sealed ball bearings, self cleaning and self cooling. Chrome plated "Push" bar for easy activation and positive stop protective timer. 30 second shut off.

Hand Held Shower Set (Model 09300)

The Hand Held Shower Set is a handshower with flexible hose designed for use by individuals with mobility or balance disabilities. The Hand Held Shower Set mounts to the existing shower head. It consists of long hose with a push-button on/off control. No tools are necessary for installation. DIMENSIONS: The hose is 84 inches long. COLOR: White

Hand Held Shower Spray & Diverter Valve

The Hand Held Shower Spray and Diverter Valve is a handshower with a flexible hose designed for use by individuals with mobility disabilities. The extra-long nylon reinforced hose allows the individual to bathe while sitting on a bath bench in the shower or tub. An on-off button at the shower head provides control of the water flow. The Diverter Valve gives the option of using the existing shower head or using the hand held shower spray. The Shower Spray attaches to a standard half-inch shower a

Hand Washing Signs - Braille

The Hand Washing Signs - Braille are tactile braille signs designed for use by individuals who are blind or have low vision. Each surface mount acrylic signs carries one of the following phrases in raised print: "Wash Hands," "Hand Wash Sink Only," or "Hand Wash Station." The Grade II braille equivalent of the phrase is located just below the print. These signs come in a large format with one of three drawings above the words, or in a smaller horizontal format with or without a drawing to the ri

Handi Lever

The Handi Lever is a cast aluminum retrofit door handle that converts existing conventional round doorknobs between 1 7/8 and 2 5/16 inches to lever style handles. The levers can be installed with an Allen wrench. No gripping or twisting is necessary to use the lever, and it is designed to not interfere with key locks or knob lock functions. SIZES: There are 7 sizes; right or left hand models. COLORS: Oil rub bronze, brushed chrome, antique brass, polished chrome, black, brass, satin brass, plat

Handi Unit

Wheelchair accessible portable toilet. Fiberglass entry ramp 49 by 60 inches. 24 inch grab bars on 2 walls. Constructed of lightweight fiberglass. Dimensions: 87 inches high by 61 inches wide by 61 inches deep. 45 gallon tank capacity. Non-skid flooring.

Handi-Grip Portable Grab Bars

Handi-Grip Portable Grab Bars are wall grab bars designed for use by individuals with balance or mobility disabilities. These telescoping bars attach to most smooth surfaces such as marble, glass, or tile, with strong suction cups at each end. Flip switches at each end anchor or release the bar. Most models are available with or without a safety indicator: When the rocker is flat to the lever, the suction is adequate for the load, when the warning rocker rises and the red edge shows, release and

Handi-Ramp Trak System

The Handi-Ramp Trak System is a pair of portable folding tracks designed for wheelchairs and scooters. Tracks are made from extruded aluminum with a non-skid surface. The pair can adjust to any door width, accommodating even the narrow entries into recreational vehicles or minivans. Tracks come in non-folding, regular folding, and heavy-duty folding versions, and include built-in handles. OPTION: Stabilizer Bar to keep the ramps from moving or sliding while in use. DIMENSIONS: All tracks are 6.7

Handi-Swing (Model 9840)

The Handi-Swing is a swing designed for persons with lower limb disabilities that would prohibit their ability to propel the swing with their legs. This arm-propelled swing has a sling style seat with waist safety belts. The seat is mounted by chains on a movable frame that has two extensions with hand grips on the ends. The user pushes and pulls on the extension poles to induce the swinging motion. WEIGHT: 47 pounds. WARRANTY: 1-year on materials and workmanship.

Handi-Tread Non Skid Stair Strips

Handi-Tread Non Skid Stair Strips are anti-slip tape designed for use to make ramps, floors, and other surfaces safer for individuals with balance or walking disabilities. This non-skid traction tread can be applied where water, ice, snow or sand can make walking slippery and dangerous, including boat docks, marinas, staircases, ramps, curb cuts, and homes. Strips are made of aluminum with a plain, anodized, or powder coated surface. DIMENSIONS (LxW): 30 x 1.875 inches. COLOR: Black, brown, red,

Handi-Tread Non Slip Pads

Handi-Tread Non Slip Pads are non slip floor covering designed for use to make floor surfaces safer for individuals with balance or walking disabilities. These non-slip pads are suitable for indoor, outdoor, residential and commercial applications. They can improve the safety of many slippery surfaces and can substitute for non slip tape and salt. The pad is made from a non-rusting, perforated button, aluminum material, and attaches to any surface using screws. Anchors may be necessary in the ca

Handicap Access Sign (Model 1550)

The Handicap Access Sign, model 1550, is an access sign designed for use to indicate accessible entryways or areas at polling places for voters with disabilities. The lightweight sign has the phrase, "Handicap Access." It is made from rust-proof corrugated plastic with Velcro for mounting to a compatible stand (not included). OPTIONS: Metal sign stand; 2-Sided Interchangeable Sign Stand. DIMENSIONS (HxW): 11 x 14 inches. WEIGHT: 2 pounds with stand. COLOR: Black letters on white background.

Handicap Access Sign (Model 1986)

The Handicap Access Sign, model 1986, is an access sign designed for use to indicate an accessible entrance or voting area at a polling place. This sign fits the Voter's Choice Portable Sign System (not included). The sign shows the International Access Symbol, a stylized drawing of a figure seated in a wheelchair. The sign is made of durable plastic and is screen printed on both sides. DIMENSIONS (HxW): 16.25 x 10 inches. COLOR: White symbol on blue background.

Handicap Access Sign (With Access Symbol) (Model 1460)

The Handicap Access Sign (with Access Symbol), model 1460, is an access sign designed to provide directions for individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs. The sign has the words "Handicap Access" beneath the International Access Symbol, a stylized drawing of a figure seated in a wheelchair. The sign comes with a wire frame. DIMENSIONS (HxW): 18 x 24 inches. COLOR: White letters and drawing on a blue background.

Handicap Access Suction Cup Sign (Model 2044)

The Handicap Access Suction Cup Sign, model 2044, is an access sign designed for use to indicate locations and routes accessible to wheelchair users. The sign has a stylized drawing of a figure seated in a wheelchair. This sign can be hanged in a window on Election Day to indicate that the polling place is wheelchair accessible. The sign comes with 3 suction cups and a storage box. This sign is also compatible with the Voter's Choice Portable Sign System (not included). DIMENSIONS (HxW): 16.25 x

Handicap Accessible Sign With Arrow And Access Symbol (Model 1459)

The Handicap Accessible Sign With Arrow and Access Symbol, model 1459, is an access sign designed to provide directions to an accessible polling place for individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs. The sign has the phrase, "Handicap Accessible," above a left pointing arrow and beneath the International Access Symbol, a stylized drawing of a figure seated in a wheelchair. The sign comes with a wire H-frame. The sign is imprinted

Handicap Bar

Stainless steel grab bar, satin finish, straight, 1 1/2 inch diameter, 1 1/2 inch wall clearance. Exposed or concealed mounts. Lengths: 18, 24, 36, 42, 48, 52 inches. Available with non slip peened surface.

Handicap Corner Bar

Stainless steel grab bar, satin finish, straight bar with one straight end and one curved end to attach at corner of wall. 1 1/2 inch diameter, 1 1/2 inch wall clearance. Exposed or concealed mounts. Lengths: 24, 30, 36, 42, 48, 52 inches. Available with peened non slip surface.

Handicap Parking Signs

Handicap Parking Signs are parking area markers designed to mark parking spaces for use by drivers or passengers with disabilities. All signs include the international access symbol, with one of the following phrases: "Handicapped Parking," "Parking," "Handicapped Parking Permit Required," "Handicapped Parking State Permit Required," or "Reserved Parking" (with or without a two-way arrow). Signs are also available meeting the specific requirements for handicapped parking signs in the states of A

Handicap Revolving Door

The Handicap Revolving Door is an accessible door that is large enough to accommodate wheelchairs. The door system includes a floor mat or motion detector to start rotation of the door, an emergency collapsing door wing mounting, a button to slow rotation to half the normal speed, and an emergency power shut off.

Handicap Sign

The Handicap Sign is a parking area marker designed for use to indicate parking areas reserved for vehicles with drivers or passengers with disabilities. This pre-painted aluminum sign features the international handicap symbol, and can be used in corporate or school parking areas. The sign is laminated with a tough poly film for durability and abrasion and chemical resistance. Its service temperature range is -20 to 140 degrees Fahrenheit. DIMENSIONS: 0.04 inch thick.

Handicap Stencils

Handicap Stencils are parking area markers designed for use by individuals with mobility disabilities. These pavement marking stencils are made from hard Dura-Tuff, a non-porous polyethylene plastic, with stencil lines in the shape of the international accessibility symbol. Paint can be applied with spray equipment or by brush or roller. The stencil can be cleaned after use by bending it or hitting a hard surface when the paint is dry so paint will flake off. The stencil can be rolled up for sto

Handicap Symbol (Model Hndcap-1)

The Handicap Symbol, model HndCap-1, is an access sign designed for use to indicate facilities that are accessible to individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs. Made from ADA acrylic, the sign features the International Access Symbol, a stylized drawing of a figure seated in a wheelchair. DIMENSIONS: 3 x 3 feet. COLOR: Variety of color combinations available.

Handicap Thresholds, Utility Thresholds, Rabetted Thresholds, & Traction Tread Thresholds

Handicap Thresholds, Utility Thresholds, Rabbetted Saddles, and Traction Tread Thresholds are accessible threshold saddles in a variety of styles. The saddles are constructed of extruded aluminum, with an aluminum, bronze, or stainless steel finish.

Handicap Voter Parking Cone Cap Sign (Model 1941)

The Handicap Voter Parking Cone Cap Sign, model 1941, is a parking area marker for a polling place designed for use to mark parking areas designated for voters with disabilities. This sign turns an existing traffic cone into a sign stand. The cone cap sign fits into a standard hole in the top of the cone. The sign has the words "Voter Parking" at the top, with two International Access Symbols (stylized drawings of a figure seated in a wheelchair) below. In use, the words wrap around the top of t

Handicap Voter Parking Sign (Model 1922)

The Handicap Voter Parking Sign, model 1922, is a parking area marker for a polling place designed to indicate parking spaces reserved for voters with disabilities. The sign has the phrase, "Handicap Parking," in the middle, between two rows of stars at the top and bottom. The sign is made of weather resistant corrugated plastic with a one-sided silk screened imprint, and fits the EZ Sign XL sign stand (not included). DIMENSIONS: Imprint area is 36 x 24 inches. COLOR: Black stars and letters on

Handicapped Accessible Ada Sign

The Handicapped Accessible ADA Sign is a braille and tactile sign designed for use by individuals who are blind or have low vision. The sign features the international access symbol above the word "Accessible" in sans serif letters and in braille. The sign is made of high impact styrene with a non-glare surface and can be used outdoors or indoors. The sign comes with double- faced adhesive tape for mounting. DIMENSIONS (HxW): 9 x 6 inches. The sign is 1/8 inch thick with 0.5-inch radius corners.

Handicapped Model Shower Cabinet.

Shower cabinet is 40 inches wide, 40 inches deep and 82 inches high. It is finished in either baked enamel or stainless steel, and features double wall construction and fibercore insulation. The pressure balanced shower valve is equipped with separate adjustable temperature limit stops. The unit also features a hand-held shower head with swivel fitting , 69 inch flexible brass hose, stainless steel curtain rod and approved curtain, a folding shower seat with a stainless steel frame, and one hori

Handicapped Shower

The Handicapped Shower is a roll-in shower designed for use by individuals who use wheelchairs. This wheelchair-accessible shower has a molded, removable incline ramp that clips into the shower base, and a removable rubber threshold that folds down when a wheelchair crosses over it, then pops up again to hold the water inside the shower. Other features include a built-in, wall-mounted, padded fold-up seat with a heavy-duty stainless steel frame; a single-handle water faucet with an anti-scald va

Handicapped Tilt Mirror (Model 0600Ta)

Adjustable tilt frame with mirror, designed to provide easy visibility for persons in wheelchairs. Frame fabricated entirely of 18 gauge stainless steel with corners welded and ground smooth. tilts a full 7 inches with bottom mounted on stainless steel piano hinge. Standard sizes: MODEL 0600TA 16 by 24 inches, MODEL 0601TA - 16 by 30 inches.

Handicapped Wheelchair Ramp Sign

The Handicap Wheelchair Ramp Sign is a wheelchair access sign designed for use by individuals with mobility disabilities. This sign shows the international accessibility symbol above the words "Wheelchair Ramp." It is made from a heavy gauge aluminum alloy, with rounded corners and smoothed edges to prevent injury. Mounting holes are located at the top and bottom center of the sign to match standard sign posts. The signs are non-reflective with a painted enamel background. OPTIONS: Reflective ba

Handiramp Single Bar Handrails

Handi-Ramp Single Bar Handrails are ramp handrails designed for use by individuals with balance, mobility, or walking disabilities. Constructed of galvanized or schedule 40 steel, these handrails help reduce slips and falls. The single rail bar can be used on stairways, ramps, pools, decks, escalators, porches, walkways, platforms, bridges and machine barriers. The handrails can be bolted directly onto the system or slid into the receiver tubes which are welded onto the HandiRamp ramp systems (s

Handiramp Singlefold Ramp (Models Asf 2, Asf 3, Asf 4, & Asf 5)

The HandiRamp Singlefold Ramp is a portable ramp designed for use by individuals with mobility disabilities or spinal cord injury. Made from durable welded aluminum, the ramp folds in half and can be carried like a suitcase. Its full platform has an anti-slip, high-traction surface, and can accommodate wheelchairs and scooters with various wheel configurations. DIMENSIONS (LxW): 2, 3, 4, or 5 feet x 30 inches. When folded, the ramp is 24 x 16 x 4 inches (model ASF 2), 36 x 16 x 4 inches (model A

Handiramp Wheelchair Porch Lift (Models Hpl-50 & Hpl-72)

The HandiRamp Wheelchair Porch Lift is an extrerior wheelchair lift designed for use by individuals with mobility disabilities or spinal cord injury. This porch lift uses a gear box and chain system to raise and lower wheelchairs or scooters. The drive system operates in all weather conditions, from minus 30 degrees to 120 degrees Fahrenheit. With a key-operated, constant-pressure switch, the rider can start, stop, and change directions at any point. The electrical system is placed well above gr

Handirest

Portable wheelchair accessible restroom. Three grab bars on walls, designed to allow forward, side or back transfers. Interior floor space, 48 by 48 inches. Door, 34 inches wide, adjustable timed release door closer, slide bolt interior lock and hasp and padlock exterior lock. Hinged front ramp, 16 by 48 inches. Wall urinal. Roof includes 24 by 36 inch skylight. Sixty gallon tank.

Handrail (Models Rt103, Rt110, Rt115/rt119, Rt114/rt118, & Rt120)

The Handrail is a hand rail designed for use by individuals with balance, lower extremity, or mobility disabilities. Model RT103 is straight; model RT110 bends at a 135-degree angle; models RT115/RT119 and RT114/RT118 bend at a 90-degree angle, with a reinforced vertical bar on the left on models RT115/RT119 or right on models RT114/RT118; and model RT120 has a bar with a 90-degree bend set an extra distance from the wall. COLORS: White, red, dark blue, gray, or turquoise.

Handrail (Models Rt130, Rt131, Rt136, & Rt138)

The Handrail is a shower wall grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. All models include a vertical bar and an angled horizontal bar, and are designed to be installed in the corner of a shower stall. COLORS: White, red, dark blue, gray, or turquoise.

Handrails.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Describes how to add handrails on porch and basement steps, and wooden handrails on long stretches of wall for anyone with difficulty walking. Pictures handrails on stairways and along walls for persons who havedifficulty walking (suggested by a woman with ALS). Handrails are availablein hardware and lumber stores. SKILLS REQUIRED: Metalworking. Woodworking. AUTHOR: Hamilton, L TITLE: Why Didn't Somebody Tell Me About These Things? REF: Pleasant Hill,

Hands-Free Faucet Controller

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with upper extremity disabilities to operate a faucet. The faucet controller attached to a shower head will convert any faucet to hands-free operation. The foot controls both water frow and temperature. This easy to install assistive device offers temperature memory, scald protection, hand sanitation and saves water and energy. For more detailed information, contact the originator. TITLE: The Hands-Free Faucet Controller. WEB SITE: Worksh

Handshower And Faucet Fitting

Hand shower stores on bathtub faucet unit, knob type handles. Models for wall or deck mount.

Handshower On Adjustable Bar.

Variety of hand showers with flexible hose: standard, swivel base, massage. Adjustable bar or hook type wall attachment, tub spout or shower head adapters.

Handshower On Adjustable Bar.

Hand shower attaches to vertical bar on wall for sliding height adjustment as wall shower. Spout adapter available to allow use of standard shower head for others.

Handshower With Flexible Hose

Flexible hose with hand shower for attachment to standard shower head. Tub spout adapter available.

Handshower With Flexible Hose

The Handshower with Flexible Hose is an attachment for standard shower heads. A tub spout adapter is available.

Handy Hook

The Handy Hook is an assistive door opener designed to help wheelchair users turn door knob locks and deadbolt locks. Doorways with limited access (i.e., a hallway) can create a barrier for many wheelchair users, prohibiting them from being able to enter or exit a location with ease. The Handy Hook solves this problem. It is a Multi-Functional Device that is capable of turning a door knob and opening a door from a distance that is clear of the door’s swing path, promoting greater independence fo

Hanover Detectable Warning Paver

The Hanover Detectable Warning Paver is a detectable warning surface that can be used in a pedestrian area to warn individuals who are blind or have low vision of an impending hazard on the route ahead. The paver has a distinctively textured walking surface with truncated domes that can be sensed by a cane or underfoot. The paver is made from crushed limestone and granite bonded together under extreme hydraulic pressure. A non-slip texture is applied to the surface of the paver. The paver can wi

Hard Curtain Ada Voting Booth (Model 2000Hcl)

The Hard Curtain ADA Voting Booth, model 2000HCL, is a wheelchair accessible voting booth designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. Made of heavy duty plastic, this unit is self-contained and lightweight. It is large enough to accommodate up to a 21-inch optical scan ballot. The booth is stackable so multiple units require minimal storage space. It has an injection molded lid and base, blow molded plastic side panels, and aluminum legs.

Haven Walk-In Bathtub

The Haven Walk-In Bathtub is a walk-in tub designed to be accessible to individuals with arthritis of the upper or lower extremities. The tub has a broad, low-level entry with an inward-swinging door. Water levels for bathing are twice as deep as a traditional tub, with wider and longer bath dimensions, and more room to soak in soothing, temperature-controlled hot water. The tub has a contoured, slip-resistant seat and backrest, and a flexible, height adjustable shower wand with an adjustable sh

Hawaii State Handicap Access Aisle Sign

The Hawaii State Handicap Access Aisle Sign is an access sign designed for use in parking lots and on streets near curb cuts to designate wheelchair-accessible pathways. The sign contains the words "No Parking - Access Aisle." The sign is made from aluminum alloy and has rounded corners and smoothed edges to prevent injury. Mounting holes are punched in the center top and bottom of the sign to match standard sign posts. The reflective background is visible in daytime or nighttime from a wide ran

Haws Barrier-Free Drinking Fountain (Model 2405)

The Haws Barrier-Free Drinking Fountain, model 2405, is an accessible fountain designed for use by individuals with upper or lower extremity disabilities, spinal cord injury, and all wheelchair users. This wall-mounted unit is designed to be installed above a wheelchair access area in public or private indoor settings such as schools, office buildings and shopping malls. The exterior is made of 18-gauge Type 304 stainless steel with a satin finish. The bubbler head is brass with chrome-plating,

Haws Barrier-Free Electric Water Cooler (Model H1119.8)

The Barrier-Free Electric Water Cooler, model H1119.8, is an accessible fountain designed for use by individuals with upper or lower extremity disabilities or spinal cord injury. This wall-mounted unit is designed for public or private indoor settings such as schools, office buildings and shopping malls. It features two water fountains - an upper unit for people who can stand and a lower unit that extends further from the wall and is intended for use by people who use wheelchairs. The unit’s MTG

Hear-More Alarm Clock With Strobe (Model Hmb300)

The Alarm Clock with Strobe is designed to awake individuals through a combination of strobe and alarm for individuals who are deaf or hard of hearing. The LCD display alarm clock features large, easy to read numbers, snooze function, AM/PM indicator and a powerful strobe attached to its top. This alarm/ strobe combination is also ideal for heavy sleepers who tend to sleep through audible alarms. The clock also features a plug in the back for a bed shaker. POWER: AC power.

Hear-More's Super Strobe Light (Model B725 & B825)

The Super Strobe Light is designed to be used with alarm clocks for individuals who are deaf or hard of hearing. This powerful strobe plugs easily into your existing alarm clock to quickly and safely awaken you. POWER: Available in AC or DC power.

Heatguard Tmv3 Shower Valve (Model Dc153)

The Heatguard TMV3 Shower Valve, model DC153, is a a water temperature control valve designed to prevent scalding of individuals with cognitive or severe physical disabilities or Alzheimers disease. This shower valve contains a single-piece thermostatic cartridge with a temperature sensitive element that expands and contracts depending on the temperature of the water flowing past it. This changes the size of the openings through which the hot and cold water enter the shower, and balances the tem

Heavy Duty Bathtub Safety Rail (Model 69603A)

The Heavy Duty Bathtub Rail, model 69603A, is a grab bar for bathtub designed for use by individuals with balance, lower extremity or mobility disability disabilities. Made of heavy-gauge, powder-coated steel, the grab bar provides two gripping surfaces to facilitate both entry and exit from tub. It attaches to a tub with extra-large suction cups. DIMENSIONS: Fits tubs with walls 3 to 7.25 inches thick. CAPACITY: 300 pounds. COLOR: White. WARRANTY: Lifetime limited warranty.

Heavy Duty Floor Closer (Ph Series)

Automatic door closer. Unit is inserted in floor beneath door with lever arm attached to bottom edge of door. Separate latch and closing speeds. 3 options: non hold open, automatic hold open, and selector hold open. 8 1/2 pounds of force required to open door.

Heavy-Duty Cylindricallever Lockset (Cl3500 Series)

The Heavy-Duty Cylindrical Lever Lockset, CL3500 Series, is a lever style security lockset designed for use by individuals with grasping or fine motor disabilities. This Grade 1 lockset has a through-bolted cylindrical chassis and solid cast levers with independent return springs to prevent lever sag. Two lever styles are available: Armstong, with a straight lever handle; and Newport, with a square-hooked lever handle. Available finishes are Bright Brass, Satin Brass, Bright Bronze, Satin Bronze

Heavy-Duty Plastic Fluted Grab Bars

The Heavy-Duty Plastic Fluted Grab Bars are grab bars designed for use by individuals with lower extremity, mobility, or balance disabilities or arthritis. These bariatric grab bars are reinforced with an aluminum tubular core for greater strength. The plastic fluted surface provides additional grip and provides assistance in preventing accidental slipping. DIMENSIONS: 12, 16, 18, 24, or 32 inches long x 1.25 inches in diameter. CAPACITY: 385 pounds. COLOR: White or blue.

Heavy-Duty Safety Tub Bar (Model 1609)

The Heavy-Duty Safety Tub Bar, model 1609, is a grab bar for bathtub designed to assist those who need extra support when using the tub. The bar is chrome-plated and has vinyl sleeves to prevent marring. A unique Lok-Fit design assures support. DIMENSIONS: 18 x 17 inches, bracket adjusts 4 to 7 1/2 inch width.

Heavy-Duty Safety Tub Bar (Models 1605, 1606, & 1607)

Heavy-Duty Safety Tub Bar, models 1605, 1606, 1607, is a grab bars for bathtub designed to make for safer entry and exit from the bathtub. The chrome-plated bars have vinyl sleeves to prevent marring and a unique Lok-Fit design to assure patient support. DIMENSIONS: 6 x 17 inches. 3 type of brackets available: for 3 to 4 1/2 inch width, for 4 to 7 1/2 inch width, for old style roll rim tubs.

Helping Hand Grab Bar, The

The Helping Hand Grab Bar is a grab bar for the toilet designed for use by individuals with arthritis or mobility or balance disabilities. This D-shaped bar mounts to the wall in front of the toilet. When needed it flips up, extends from the wall, and locks in place.When not in use, it flips down against the wall. DIMENSIONS: 16 or 24 inches. COLOR: White.

Heritage Elevator

The Heritage Elevator is a home elevator designed for use by individuals with mobility disabilities or spinal cord injury. This elevator is available with regular or custom doors to match the decor throughout the home. Features include automatic sliding doors on the cab; solid vinyl accordion gate; position indicators in the cab and on each floor; an infrared safety light curtain; custom cab sizes; and a two-speed valve for soft start and stop. The standard car operating panel has buttons and is

Heritage Natural Spectrum Desk Lamp

The Heritage Natural Spectrum Desk Lamp is a low vision light designed for use by individuals with low vision. This lamp features the patented 27 Watt 10,000-hour Verilux Natural Spectrum bulb and an Optix Glare Control Filter to reduce reflective and peripheral glare. Multi-level illumination offers adjustable brightness equivalent to 75, 100, or 150 Watts. This all-metal light also has a replaceable remote ballast and no-buzz operation with instant-on, flicker-free illumination. DIMENSIONS (Hx

Heritage Natural Spectrum Floor Lamp

The Heritage Natural Spectrum Floor Lamp is a height-adjustable low vision lamp designed for use by individuals with low vision. This lamp uses a special three-way replacable bulb (included) that offers bright, natural white light, consumes only 27 watts, delivers up to 150 watts of brightness, and lasts up to 10,000 hours (about two to three years of normal usage). It emits no harmful ultra violet (UV) rays, and generates very little heat. The lamp is fitted with a glare control filter. OPTIONS

Hero Threshold Ramp (Models Aa Thresh 1, Aa Thresh 2, & Aa Thresh 3)

The Hero Threshold Ramp, models AA Thresh 1, AA Thresh 2 and AA Thresh 3, is an accessible threshold designed for use by individuals with mobility disabilities or spinal cord injury. This aluminum threshold ramp has an anodized, non-skid surface, and it is designed as a modular system in both the top surface and legs. DIMENSIONS (HxLxW): Usable area is 1 x 8.5 x 34 inches (AA Thresh 1); 2 x 14.5 x 34 inches (AA Thresh 2); 3 x 20.5 x 34 inches (AA Thresh 3). CAPACITY: 800 pounds. WEIGHT: 4 pounds

Hes-125 Stair Platform Lift

The HES-125 Stair Platform Lift is an interior stair lift designed for use to provide access for wheelchairs and scooters in residential or commercial settings. Features include three- sided access to the wheelchair lift platform, custom colors, self-support posts, an emergency stop switch, and a fold-up seat with safety belt. The platform can be folded manually or by power to take up less stairway width. DIMENSIONS (DxW): Available platform sizes are 36 x 27.5 inches, 44 x 28.5 inches, 48 x 30

Hexagonal Picnic Table - Wheelchair Accessible (Model Ohtha)

The Hexagonal Picnic Table - Wheelchair Accessible, model OHTHA, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This six-sided table has space on one side for a wheelchair. The frame, seats, and table top are made from 100 percent recycled plastic, with stainless steel hardware. The table also includes an umbrella hole. DIMENSIONS (HxW): The table top is 30.5 x 40 inches. The seats are 17.5 x 9.5 inches. The umbrella hole is 2 inche

Hidden Access Lift (Hal)

The HAL is an interior wheelchair lift designed for use in theaters, historic buildings, performing arts centers, and similar venues. This vertical platform lift stores beneath the floor's surface, hidden by hinged floor panels. When the lift is needed, the floor panels open and the lift raises to the surface, ready for travel up to the upper elevation. The lift is invisible until needed. The lift is designed to be durable and is easy to maintain. For the user, it provides a direct connection fr

Highlander Commercial Vertical Platform Wheelchair Lift

The Highlander Commercial Vertical Platform Wheelchair Lift is an interior and exterior wheelchair lift designed for use by individuals with spinal cord injury or lower extremity or mobility disabilities and others who use wheelchairs. This lift is a freestanding unit that requires minimal construction to provide access to a building. The lift consists of a drive system and the passenger platform. The platform is enclosed on two sides. Safety features include constant pressure, paddle switch con

Highlander Residential Vertical Platform Lift

The Highlander Residential Vertical Platform Lift is an interior and exterior wheelchair lift designed for use by individuals with spinal cord injury or lower extremity or mobility disabilities and others who use wheelchairs. This lift is a freestanding unit that requires minimal construction to provide access to a home or other structure. The lift consists of a drive system and the passenger platform. The platform is enclosed on two sides. Safety features include constant pressure, paddle switc

Hill-Rom Np50 Prevention Surface

The Hill-Rom NP50 Prevention Surface is a foam mattress surface and decubitis pad designed for use individuals in acute care or with severe physical disabilities or spinal cord injury. This lightweight, durable surface is constructed of high-density medical-grade foam with fluid proof nylon ticking and a vinyl base. The surface redistributes pressure to help prevent decubitis ulcers. It articulates with a frame and is reversible from head to foot. OPTIONS: Bolster/raised firm perimeter. CAPACITY

Hinged Arm Support, Set For Mounting At 45 Degrees, Fixed Arm Supports (Models 2601 & 2603)

The Hinged Arm Support, Set for Mounting at 45 Degrees, Fixed Arm Supports, Models 2601 & 2603, are wall grab bars for toilets designed for use by people with physical disabilities. The hinged units have single hand operation, lock in the upright position, and have an aluminum and nylon hinge point. The mounting set has a 45 degree angle for corner toilets. Both models are available in stainless steel. OPTIONS: An optional paper hook is available. DIMENSIONS: Wall mount dimensions are 11 x 4

Hinged Corner Shower Seat (Model 954) & Fixed Corner Shower Seat (Model 9541)

The Hinged Corner Shower Seat ##954 is a folding shower seat that is hinged on one wall, and folds down for use. The seat is made of 16 gauge stainless steel. Joints are 3/4 inch channel formed return edges, corners are Heliarc welded and ground smooth for maximum rigidity and safety, and it has a piano hinge. The support angle and the retaining clip are made of stainless steel. The Fixed Corner Shower Seat ##9541 has the same dimensions and specifications as the Hinged Corner Shower Seat, but d

Hockey Stick Bar (Model 832)

The Hockey Stick ##832 is a stainless steel wall mounted grab bar that can be used in bathtubs and showers, or next to toilets. The support is shaped in the form of a hockey stick with a longer vertical bar and a shorter horizontal bar that attaches to the wall in two places at the ends. The bar is bent at 97 degrees to create these two sides. The bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS: 32 x 8 inches with 1, 1.25, or 1.5

Home Care Bariatic Bed (Models 3639 & 3648)

The Home Care Bariatric Bed, models 3638 and 3648, is a reinforced, motorized bed designed for use by individuals with obesity and severe physical disabilities or spinal cord injury. This bed features a split-frame construction with powered height adjustment, fowler backrest and leg lift. Drop-down removable side rails, a footboard, a headboard and a remote control are standard. OPTIONS: Bariatric mattress; emergency battery backup. DIMENSIONS: The length is 84 inches. The width can be adjusted

Home Thermostat Setting Aid.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Modification to home thermostat to make it easier to read and to set for use by those with poor eyesight or limited fine finger dexterity. Shows two standard home thermostats modified with pointers and expanded size temperature scales. Diagram included. COMMENTS: Does not list materials used or provide instructions. For further information contact Leonard Anderson, Cerebral Palsy Research Foundation of Kansas Rehabilitation Engineering Center, 2021 Nor

Homecare Advantage Bed

The Homecare Advantage Bed is a motorized bed designed for use by obese individuals and people with severe physical or mobility disabilities or spinal cord injury. This fully electric bed has eight functions, including raising and lowering the head section; raising and lowering the entire bed; raising and lowering the foot section; and raising or lowering the sections into a Comfort Chair position. FRAME: The heavy-duty steel frame splits in half for transport and includes oak head- and footboar

Homemade Van Ramp.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Wheelchair ramp for a van. Describes a wheelchair ramp made of strong 1/4 inch aluminum channel irons and angle cross pieces from a boat manufacturing plant. The runners are made of two 45 inch sections each, hinged together with barn door hinges. Shallow steps are built between the runners, and covered with indoor-outdoor carpeting. Includes photographs. COMMENTS: Developed by Harley Karvonen of Perham, Minnesota. SKILLS REQUIRED: Metalworking. Woodwo

Homewaiter 75

The Homewaiter 75 is a dumb waiter designed for home or office use by individuals with mobility or upper extremity disabilities. This monorail-style unit features an aluminum rail and a steel car and can accommodate openings on three sides. The unit offers automatic controls from any floor. Safety features include a broken cable safety device and slack cable disconnect. The unit comes partially pre-wired and pre-assembled for easy installation. POWER: Uses standard household current. DIMENSIONS:

Honeywell Easy-To-See Thermostat (Model T87N1026)

The Honeywell Easy-To-See Thermostat, model T87N1026, is a large-number and tactile thermostat designed for use by individuals who are blind or have low vision. This mercury-free thermostat controls both heating and air-conditioning in one unit. Its large, easy-to-see numbers are tactually raised, and the thermostat clicks at every 2-degree setting change from 40 to 90 degrees Fahrenheit. DIMENSIONS: 4 inches in diameter and 1.75 inches deep. Numbers are 0.38 inches high.

Honeywell Ultrasonic Egg Humidifier

The Honeywell Ultrasonic Egg Humidifier is designed to help persons with disabilities that negatively affect their breathing, such as asthma or an allergic reaction to elements in the air. Quiet operation, adjustable humidity control (3 speeds). For a room size of 300-500 feet. Can run 24 hours on one fill. Cool mist. Moisture output: 1.0 gallons. Includes Owner’s manual. Requires 120 volts.

Hookless Hangers

Hookless Hangers are hangers with no hook intended for people with fine motor, standing and neurological disabilities and people of short stature. These hangers attach to a metal strip (sold separately) using a neodymium magnet at the top of the hanger. Using Hookless Hangers lowers the overall height necessary for hanging clothes so that a shelf above the clothes or a second level of hangers is also lower. Hookless Hangers are available in several different types of wood, including walnut, bamb

Hookless Tie / Belt Hangar

The Hookless Tie/Belt Hanger is a hanger with no hook intended for people with fine motor, standing and neurological disabilities and people of short stature. The hanger attaches to a metal strip (sold separately) using a neodymium magnet at the top of the hanger. It consisted of a vertical wooden post with the magnet at one end and four perpendicular, evenly spaced, smaller rods attached to the central post to form crossbars. Ties or belts can be hung from the crossbars which extend from both s

Horizon Lift Traction Elevator

The Horizon Lift Traction Elevator is a home elevator designed for use by individuals with mobility or walking disabilities. This variable speed traction residential elevator provides a smooth ride and does not require a separate engine room. Supported by three heavy-duty aircraft cables, the lift travels up to 50 feet at a speed of 40 feet per minute. In the event of a power outage, the lift's auto lowering emergency system lowers the lift to the next landing, allowing passengers to exit. The l

Horizontal Shower Bar With Vertical Arm (Model 2424-V)

The Horizontal Shower Bar with Vertical Arm ##2424-V is a stainless steel wall mounted grab bar. The support consists of a horizontal bar with an L- shape to fit the corner of the shower and a vertical bar for additional hold when entering or exiting the shower. The bar is available in 4 concealed or 4 exposed mounting styles. DIMENSIONS: 24 x 24 x 32 inches with 1, 1.25, or 1.5 inch diameter tubing. Safety wall clearance is 1.5 inches. FINISH: Brushed Satin is standard; optional finishes includ

Horizontal Tub Bar With Vertical Arm (Model 2040-V/vm)

The Horizontal Tub Bar with Vertical Arm is a stainless steel wall mounted grab bar for bathtubs. The support consists of a horizontal bar with an L- shape to fit to the corner of the side and back walls of the tub, and a vertical bar for additional hold when entering or leaving the bathing area. The bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS: 40 x 20 x 32 inches (##2040- V) or 24 x 48 x 32 (##2040-VM with center mounting) w

Horton Automatic 7000 Easy Access For Swing Doors

Powered door operator features 3 to 8 second adjustable opening time, side hung and balanced, exerts less than 15 pounds pressure, can be used on new or existing installations. Maximum door width 42 inches, maximum door weight 140 pounds. Power requirements are 115 volt 2.5A. Door opens to 90 degree angle, for exterior or interior use. Hold open time is adjustable 2 to 25 seconds. Door will stop if obstructed. In case of power failure, 15 pounds force needed to open, but force is adjustable. Has

Horton Automatics Series 8700 Residential Sliding Door Operator

Powered door operator for residential sliding door. Size: 3 inches by 3 1/2 inches by width of door. Opening speed adjustable, approximately 3 seconds minimum. Closing speed adjustable, approximately 4 seconds minimum. Hold open time delay, adjustable 1 to 15 seconds. Reverses if door contacts object during closing. Activated by push button switch. Optional: automatic locking, remote radio control.

Hr1 Bamboo Handrail

The HR1 Bamboo Handrail is a handrail designed for use by individuals with balance, lower extremity, mobility or walking disabilities. The handrail is made of bamboo coated with a low-VOC UV-protective clear finish. It has a 1.5-inch diameter grip, and it extends 3 inches from the wall. All mounting fasteners are included. DIMENSIONS (LxD): 8 to 16 feet x 5.5 inches. COLOR: Carbonized or natural finish. WARRANTY: Limited lifetime warranty.

Hr12 Northern Hardwoods Real Wood Handrail

The HR12 Northern Hardwoods Real Wood Handrail is a handrail designed for use by individuals with balance, lower extremity, mobility or walking disabilities. The handrail is made of red oak, maple, ash or poplar coated with a low-VOC UV-protective clear finish. It has a 1.5-inch diameter grip, and it extends 3 inches from the wall. All mounting fasteners are included with the product. Available insert options include IPC rigid sheet, solid wood, v-groove wood, BioPrism Solid Surface or a flex bu

Hr2 Northern Hardwoods Real Wood Handrail

The HR2 Northern Hardwoods Real Wood Handrail is a handrail designed for use by individuals with balance, lower extremity, mobility or walking disabilities. The handrail is made of red oak, maple, ash or poplar coated with a low-VOC UV-protective clear finish, and it incorporates a 1.125-inch impact bumper. It has a 1.5-inch diameter grip and extends 3.5 inches from the wall. All mounting fasteners are included with the product. The product can be ordered as pre-assembled units complete with ret

Hr3 Northern Hardwoods Real Wood Handrail

The HR3 Northern Hardwoods Real Wood Handrail is a handrail designed for use by individuals with balance, lower extremity, mobility or walking disabilities. The handrail is made of red oak, maple, ash or poplar, and it incorporates a 2-inch impact bumper. It has a 1.5-inch diameter grip, and extends 3.5 inches from the wall. All mounting fasteners are included with the product. The product can be ordered as pre-assembled units complete with returns per customer's specifications or as stock lengt

Hr4 Northern Hardwoods Real Wood Handrail

The HR4 Northern Hardwoods Real Wood Handrail is a handrail designed for use by individuals with balance, lower extremity, mobility or walking disabilities. The handrail is made of red oak, maple, ash or poplar coated with a low-VOC UV-protective clear finish. It has a 1.5-inch diameter grip and extends 3 inches from the wall. All mounting fasteners are included with the product. Available insert options include IPC rigid sheet, solid wood, v-groove wood, and BioPrism Solid Surface. The product

Hr5 Northern Hardwoods Real Wood Handrail

The HR5 Northern Hardwoods Real Wood Handrail is a handrail designed for use by individuals with balance, lower extremity, mobility or walking disabilities. The handrail is made of red oak, maple, ash or poplar coated with a low-VOC UV-protective clear finish. It has a 1.5-inch diameter grip and extends 3 inches from the wall. All mounting fasteners are included with the product. Available insert options include IPC rigid sheet, solid wood, v-groove wood, and BioPrism Solid Surface. A rear mount

Hr8 Northern Hardwoods Real Wood Handrail

The HR8 Northern Hardwoods Real Wood Handrail is a handrail designed for use by individuals with balance, lower extremity, mobility or walking disabilities. The handrail is made of red oak, maple, ash or poplar coated with a low-VOC UV-protective clear finish. It has a 1.5-inch diameter grip which extends 3 inches from the wall. Available insert options are IPC rigid sheet, solid wood, v-groove wood, BioPrism Solid Surface or a flex bumper. All mounting fasteners are included with the product. A

Hr9 Bamboo Real Wood Handrail

The HR9 Bamboo Real Wood Handrail is a handrail designed for use by individuals with balance, lower extremity, mobility or walking disabilities. The handrail is made of bamboo coated with a low-VOC UV-protective clear finish. DIMENSIONS: The handrail grip is 1.5 inches in diameter; the handrail assembly is 1.375 inches high. COLOR: Carbonized or natural finish. WARRANTY: Limited lifetime warranty.

Hr9 Northern Hardwoods Real Wood Handrail

The HR9 Northern Hardwoods Real Wood Handrail is a handrail designed for use by individuals with balance, lower extremity, mobility or walking disabilities. The handrail is made of red oak, maple or poplar coated with a low-VOC UV-protective clear finish. A rear mount bracket assembly is also available. DIMENSIONS (LxH): 8 to 16 feet x 1.375 inches; the handrail grip is 1.5 inches in diameter. COLOR: Available in a variety of wood grain patterns. WARRANTY: Limited lifetime warranty.

Hy-Gina Care Personal Portable Shower (Models 1000 & 2000)

Hy-Gina Care is a portable shower designed to enable caregivers and people with physical disabilities to perform personal bathing, hygiene, and shampooing tasks. Constructed of heavy-duty polyester resins and fiberglass compunds, this cabinet-style shower features side or front entry, an attached transfer seat with support legs, and a built-in hydro-powered seat with one-touch controls. Showering nozzles are placed to provide total body water coverage in a criss-cross pattern and a hand-held sha

Hy-Ko Lite Access Signs

Hy-Ko Lite is a line of signs with the international access symbol on them. Model HW-13 is made of heavy gauge aluminum ($4.95 ea), model HSV-7 is a self-adhesive vinyl sticker ($0.40 ea). DIMENSIONS: HW-13 is 12 x 18 inches, HSV-7 is 3.75 x 4.75 inches. COLOR: Both signs are white with blue lettering.

Hy-Ko Lite Parking Signs

The Hy-Ko Lite Parking Signs are self-adhesive vinyl or aluminum parking signs featuring the international accessibility symbol. DIMENSIONS: 7 x 10 inches. COLOR: White with blue lettering.

Hygenique Bidet

The Hygenique Bidet is a toilet bidet for people with mobility or upper extremity disabilities. It consists of a cleansing wand that attaches to a nearby faucet with a 10-foot hose and a premium diverter faucet adapter. The wand can be used to wash the perineal area. When the door on the insert is closed, the sitz bath can fill. Twenty glycerin cleansing cartridges that fit inside the spray wand are included.

Hygenique Deluxe Whirlpool Sitz Bath / Bidet

The Hygenique Deluxe Whirlpool Sitz Bath/Bidet is a portable sitz bath and toilet bidet for people with mobility or upper extremity disabilities. It consists of a molded plastic insert that fits into standard toilet seat; a cleansing wand that attaches to a nearby faucet with a 10-foot hose; and a premium diverter faucet adapter. The insert has an opening that, when left open, allows the product to act as a bidet, gently washing the perineal area. When the door on the insert is closed, the sitz

Hygenique Standard Whirlpool Sitz Bath / Bidet

The Hygenique Standard Whirlpool Sitz Bath/Bidet is a portable sitz bath and toilet bidet for people with mobility or upper extremity disabilities. It consists of a molded plastic insert that fits into standard toilet seat; a cleansing wand that attaches to a nearby faucet with a 10-foot hose; and a diverter faucet adapter. The insert has an opening that, when left open, allows the product to act as a bidet, gently washing the perineal area. When the door on the insert is closed, the sitz bath c

Hygiene Refresher

The Hygiene Refresher is designed for individuals with limited upper body mobility or for persons who cannot twist at the waist. This product may also be used by individuals who find toilet tissue to be too rough on their skin, or for persons who cannot completely clean themselves after using the restroom, or for persons who prefer a bidet-style way of using the restroom. To use, the user fills bottle with water. Then, the user squeezes the bottle and water sprays out of the nozzle. Lightweight.

I-Openr

The I-OpenR is a powered door opener for a trash receptacle with a swinging door designed for use by individuals with upper extremity or severe physical disabilities or spinal cord injury. Usable in the home or in restaurants, food courts, and other public venues, this device permits hands-free use of the receptacle. An infra-red eye detects an object being thrown away and automatically opens the trash door. Features include an LED trash-level sensor that changes from solid green to flashing red

Idea Works Super Grip Suction Mount Handle

The Idea Works Super Grip Suction Mount Handle is a grab bar for bathtub designed for use by individuals with mobility or balance disabilities. Designed to assist in getting in and out of a bathtub, this device features two suction cups that secures the handle on the side of the tub or shower wall. Once the lever is released, the unit can be removed and made portable for travel. There are no tools required for mounting. CAPACITY: 156 pounds

Ihip Sound System

iHip Sound System is a lightweight wearable platform for a smart phone for individuals with physical, cognitive or communication disabilities. This system allows the user to mount a smart phone or iTouch on the iHip platform, plug in the speaker and wrap it around the user’s waist to start communicating or listening to music. There are two flexible cords (adjustable from 3¼" to 3¾" apart) to securely hold the device in place. The iHip can also sit on a tabletop or tray with its two adjustable l

Il500 Sierra Inclined Platform Lift

The IL500 Sierra Inclined Platform Lift is an interior and exterior platform wheelchair lift designed to transport people with lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair or scooter users up and down a single flight of stairs with two landings. This lift is a freestanding unit that requires minimal construction to provide access to a home or other structure. Designed for indoor and outdoor (with optional Outdoor Package IL500OD) use, this lift s

Imagecast Precinct

The Imagecast Precinct is a voice output voting machine designed for use by voters who are blind or have low vision. The machine has an LCD touchscreen with an alternative audio and tactile interface using off-the-shelf headphones, and it includes a display for accessible interactive voter review of the ballot. It retains a secure digital image of every ballot cast, and eliminates ambiguous vote markings. The unit has one off/on switch and one security key. Tabulation and central databases encry

In Case Of Fire Use Stairway (With Braille) Sign (Model Rre 260)

The In Case of Fire Use Stairway (with Braille) Sign, model RRE 260, is a braille emergency evacuation navigation sign designed for use by individuals who are blind or have low vision. The sign is made from acrylic plastic or metalized acrylic. It features a drawing representing flames and a figure walking down a stairway, with the upper case words "IN CASE OF FIRE USE STAIRWAY" and the equivalent in lower case braille ("in case of fire use stairway"). DIMENSIONS (HxW): 9 x 6 inches. COLOR: Acry

Inclinator Vl

The Inclinator VL is an interior or exterior wheelchair lift designed for use in churches, schools, meeting halls, offices or homes. Made of 16-gauge steel with a weather-resistant coating, this platform lift is designed for quiet operation and features keyswitch operation, emergency stop, and an emergency alarm. The one horse power (HP) motor is located at the top for ease in servicing. OPTIONS: 42-inch high landing gate, 42-inch high platform gate, an auto-fold ramp, a stationary ramp at the l

Inclined Aid Rail (Model 2245)

The Inclined Aid Rail ##2245 is a stainless steel wall mounted grab bar for use in bathtubs and showers, or by toilets. This support is a straight bar that attaches to the wall at both ends. It is available with 4 concealed or 4 exposed mountings, and, when diamond shaped mountings are ordered, is available in right or left hand configurations. When mounted at a 45 degree angle with 22 5/8 inch centerline, this bar is designed to exactly hit building studs 16 inches apart. DIMENSIONS: 22 5/8 inc

Independence Line 1-Piece Transfer Shower

The Independence Line 1-Piece Transfer Shower, model MP3837BF, is an accessible shower stall designed for use by individuals with mobility or balance disabilities. This fiberglass-reinforced gelcoat shower has a built-in corner seat, grab bars, a flexible hose shower head, and a slip-resistant, textured floor with a center drain. OPTIONS: Dome (model IN38). DIMENSIONS (HxDxW): 78.25 x 38 x 38 inches. The unit has an ADA-compliant 2-inch threshold if it is installed in a 1.5-inch recess. COLOR: W

Individual Sitz Bath (Models 06-665-03 & 06-665-05)

Portable disposable sitz bath. Plastic basin with drain holes fits over toilet seat. Water bag with tubing attaches to basin. Deluxe (06-665- 03) and economy (06-665-05) models available.

Indoor / Outdoor Braille Signs

Indoor/Outdoor Braille Signs are tactile signs for facilities made of Makrofol EPC, a mix of Tedlar and polycarbonate materials designed to withstand the elements. Sign messages include: Volume Telephone, Text Telephone, Hearing Loss Accessible, Handicapped Access, Men, Women, Restroom, Telephone, No Smoking, Cafeteria, First Aid, and Garage. Signs have printed, capitalized lettering with the Braille underneath; some signs have symbols. MOUNTING: Signs are mounted on a 1/8-inch acrylic back plat

Indoor / Outdoor Graphic Symbol Signs

The Indoor/Outdoor Graphic Symbol Signs are designed for indicating accessible features of a building or parking area primarily be means of graphics. All signs include the international symbol of access. Signs are available for a ramp, wheelchair accessible phone, elevator, handicapped parking, and restrooms. The signs are made from embossed steel or polished plastic. The steel signs consist of heavy galvanized bonderized steel with backed enamel finish. Borders, legends, and symbols are embosse

Infant Maze

The Infant Maze is a freestanding playground equipment with activity boards designed to help infants from 6 to 18 months discover learning at their own level. The compact system includes interactive activity panels with aluminum handles to encourage mobility, stimulate the senses, and develop physical skills. A ground-level crawl tunnel lets infants explore new shapes and spaces, while a square poly roof covers the interior space to create a playhouse effect. The activity panels are cut from 3/4

Infinity Residential Elevator

The Infinity Residential Elevator is a home elevator designed for use by individuals with mobility or walking disabilities or spinal cord injury. This elevator has a 1:2 cable hydraulic drive for smooth starts and stops and comes standard in a two-station model in a choice of two cab styles. Standard features include a scissor gate, automatic cab lighting, vertical stainless steel keyed control panel, melamine wall panels, in-car digital floor indicator, metal car station buttons with halo light

Inflatable Neck Cushion (Model 555-7910-0000)

The Inflatable Neck Cushion, model 555-7910-0000, is a cervical pillow designed for use by individuals who need head and neck support. This neck cushion is ergonomically designed to support the head and neck during napping or relaxation. It inflates to the desired comfort level and deflates for compact storage in a pocket, purse or briefcase. It is made of brushed velour-like vinyl and comes with a storage case. COLOR: Gray.

Injection Molded Braille Signs

Injection Molded Braille Signs are tactile access and facility signs with international graphic symbols in addition to the English and Braille. Lettering is raised and presented in all capital letters. Messages include: Women, Men, Restroom, No Smoking, Handicapped, and Stairs. DIMENSIONS: 8 x 8 inches. COLOR: White lettering/graphics on black or brown background.

Innovations Centered Bath Faucet (Models 547 & 547-Nn)

The Innovations Centerset Bath Faucet, models 547 and 547-NN, is an electronic faucet designed for use by individuals with fine motor, grasping, or neurological disabilities. An electronic sensor starts the flow of water when hands are placed under the faucet. The faucet has a temperature control handle with a high-temperature limit stop to prevent rotation into dangerously hot zones. Six interchangeable handles are included in different colors to match the bathroom decor. The faucet fits 3-hole

Inside Corner Grab Bar

Stainless steel corner grab bar. 1, 1 1/4 or 1 1/2 inch diameter, 1 1/2 inch wall clearance. Satin finish. Exposed or concealed mount. 20 by 40 inches.

Inspire Walk-In Shower

The Inspire Walk-In Shower is an accessible roll in shower stall designed for use by individuals with mobility disabilities, including wheelchair users and individuals with arthritis. The shower entrance has bi-fold shower doors that open a full 180 degrees to provide barrier-free access across the entire width of the shower. The shower doors are comprised of a single full height tempered glass panel coupled with two half-height panels. All panels feature tempered raindrop patterns. This accessi

Inswing Exterior Door Threshold - Dark Bronze - Ada Compliant

The Inswing Exterior Door Threshold - Dark Bronze - ADA Compliant is an accessible threshold designed to modify a doorway to make it wheelchair accessible. A continuous dam provides a sill with a positive barrier to wind driven air and water infiltration, and helps maintain proper contact between the door bottom and sill for insulation and maintenance of the structure. Made of aluminum, the unit accomodates most single, hinged patio and french door systems configured with the door swinging inwar

Invacare Knurled Chrome Grab Bar (Models 512-3, 516-3, 518-3, 524-3. & 532-3)

The Invacare Knurled Chrome Grab Bar is a bathroom wall grab bar designed for use by individuals with balance or mobility disabilities. This grab bar is made of chrome-plated steel with a knurled surface. It mounts at a variety of angles to a wall's structural supports. Rubber gaskets protect the wall surface. DIMENSIONS: 1 inch diameter with length of 12 inches (model 512-3), 16 inches (model 516-3), 18 inches (model 518-3), 24 inches (model 524-3), or 32 inches (model 532-3). Wall clearance is

Invacare Molded Tub Bar (Model 710-4)

The Invacare Molded Tub Bar, model 710-4, is a grab bar for bathtub designed for use by individuals with balance or mobility disabilities or arthritis. Made of molded plastic, this unit attaches to the wall of the bathtub to provide two gripping surfaces. The upper gripping surface helps the user to enter the tub, and the lower gripping surface assists the user in lowering into or rising from a seated position in the tub. The unit has an adjustable locking mechanism for attaching to the wall of

Invacare Ramps (Models Icr630 & Icr330)

The Invacare Ramps are suitcase-style portable ramps designed for use with manual and power wheelchairs and three- and four-wheel scooters. Both models fold and feature a slide-on clip and carrying handle for secure storageand transport. Model ICR330 is a single-fold model and model ICR630 is a multi-fold model. High traction tape on the surface of both models is long-lasting and maintenance-free. DIMENSIONS: Open, model ICR630 is 6 feet long x 30 inches wide and model ICR330 is 3 feet long x 3

Invacare White Grab Bar (Models 312-3, 316-3, 318-3, 324-3, & 332-3)

The Invacare White Grab Bar is a wall grab bar designed for use by individuals with balance or mobility disabilities in bathrooms. The grab bar is made of steel with a vinyl coating. DIMENSIONS: 1 inch diameter with length of 12 inches (model 312-3), 16 inches (model 316-3), 18 inches (model 318-3), 24 inches (model 324-3), or 32 inches (model 332-3). Wall clearance is 3.75 inches. CAPACITY: 250 pounds. WEIGHT: 1 pound (312-3), 1 pound 4 ounces (316-3), 1 pound 8 ounces (318-3), 1 pound 12 ounce

Inverted T Grab Bar

The Inverted T Grab Bar is a wall-mounted grab bar designed for use by individuals with balance or mobility disabilities or spinal cord injury. It has one vertical bar perpendicular to a horizontal bar. The bars attach to the wall at four points. OPTIONS: Slide hook. DIMENSIONS (HxW): 24 x 32 or 32 x 24 inches. COLOR: Available finishes include antique brass, polished brass, polished nickel, satin chrome, satin nickel, satin brass, satin gold, antique copper, black nickel, polished gold, oil-rub

Invisia Accent Bar

The Invisia Accent Bar is a decorative grab bar, that allows one to disguise its purpose. The bar can hold up to 500 pounds and can be installed vertically, horizontally, or angled. Choose from chrome, bronze or stainless steel.

Invisia Accent Ring

The Invisia Accent Ring is a curved wall grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. This stainless steel bar forms a three-quarter circle and is contoured to fit around circular shower and bathtub control fixtures. This unit has concealed mounting screws and multiple points of contact with the wall. CAPACITY: 350 pounds. COLOR: Brushed nickel or triple-plated chrome

Invisia Bath Bench

The Invisia Bath Bench is a sturdy seat/table for a bath tub. The product is designed to keep bath bench use discreet, while providing a decorative accessory. The bench is made from Brazilian walnut which is naturally resistant to moisture, mildew and decay. Choose either a powder bronze or power grey side frame.

Invisia Corner Shelf

The Invisia Corner Shelf is a corner shelf for shower with wall grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. This unit comprises a triangular Dupont Corian shelf with a curved stainless steel grab bar in front. This unit has concealed mounting screws and two points of contact with the wall. CAPACITY: 350 pounds. COLOR: Brushed nickel or triple-plated chrome.

Invisia Serenaseat

The Invisia SerenaSeat is a wall-mounted folding shower seat designed for use by individuals with balance, mobility, or lower extremity disabilities. This seat has a Brazilian walnut seat and back and an aluminum frame. Brazilian Walnut is naturally resistant to moisture, mildew and decay. The removable backrest conceals the screws of the mounting brackets. The seat folds up when not in use. DIMENSIONS: Folded, the seat has a 3-inch profile. Open, the seat is 18 x 15 x 15 inches. The mounting br

Invisia Shampoo Shelf

The Invisia Shampoo Shelf is a dual product, that stores shampoos, soaps, and other shower items, while discreetly providing support as a grab bar. The Shampoo Shelf can hold up to 500 pounds and includes a solid surface tray that resists the growth of mold and bacteria.

Invisia Towel Bar With Integrated Safety Rail / Grab Bar

The Invisia Towel Bar with Integrated Grab Bar/Safety Rail is a towel bar with grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. Made of stainless steel, this unit comprises a towel bar suspended below a curved grab bar. For maximum support, these bars have three points of contact with the wall. DIMENSIONS: 16 or 24 inches long. CAPACITY: 350 pounds. COLOR: White powdercoat, brushed nickel, or triple-plated chrome.

Invisible Lift

The Invisible Lift is an interior seat lift designed to make places more accessible for individuals who use a wheelchair. This lift is unique in that is concealed when not in use, thus saving valuable space by eliminating a lifting tower. It is designed to provide adequate lifting capabilities without obvious mechanisms or audible noise. Additional custom features include colors, materials, and finishes to blend with the surrounding decor. Proven dependability, easy maintainance, and safety feat

Iris+ App

IRiS+ is an application designed to allow an iPad®, iPhone®, or iPod Touch® to control sensory equipment or to enable the user to easily control a multi-sensory room. Offers several control switches in one— sound, touch, vibration, and movement. The full IRiS+ app is free to download and by doing so, one can control either one or a number of multi-sensory products in a variety of ways. Through touch, the user may choose Multiple Buttons Mode: Choose between two, four and eight switches to contro

Itty-Bitty Book Light

The Itty-Bitty Book Light is a low vision light designed for use by individuals with low vision. Designed to be lightweight and portable, this reading light has telescoping arms and a revolving lamp hood. Made of durable plastic, the light clips to any paperback and hardcover book and provides direct reading light through two bright LED bulbs. The bulbs are heat-free and provide 100,000 hours of light. The light automatically turns on when the telescoping arm is extended. A durable carrying case

Ivotronic Touch Screen Voting System With Audio Ballot Feature

The iVotronic Touch Screen Voting System with Audio Ballot Feature is a voice output voting machine designed for use by voters who are blind or have low vision. The voice output feature presents both general use instructions and ballot choices to the voter in a human voice (not digitally synthesized) through headphones attached to the iVotronic unit. The voter puts on the audio headset provided with the unit, and the ballot is activated by inserting the ballot activator cartridge into the unit.

Izi-Flow

IZI-flow is a hands-free faucet control designed to allow individuals with fine motor, grasping, or upper extremity disabilities to control a faucet. The IZI-flow is a mechanical valve that is connected to the faucet's water input(s) under the sink and controlled by a mechanical foot pedal (included). The flow speed and temperature are still set using the faucet's handle(s) or knob(s). The user turns on the faucet by depressing the foot pedal and turns it off by releasing the pedal. The IZI-flow

Jackson 3185 Mid Panel Exit Device

The Jackson Mid Panel Exit Device is a panic bar that requires minimum pressure anywhere along the push section for activation. Designed for narrow, medium, and wide style aluminum doors. DIMENSIONS: 5 (h) x 24.5 (w) inches. UL approved for doors up to 48 inches wide. FINISHES: Available in dark bronze, black, and clear aluminum.

Jamesair Support Surfaces

The JamesAir Support Surfaces are alternating air pressure mattress surface designed to prevent and treat pressure sores/ulcers. The units are available with low air loss and/or alternating pressure. Also available is a turning mattress. These surfaces are available in standard and bariatric models. POWER: 120-volt alternating current (AC), 60 hertz (Hz), 22/230 volt AC, 50 Hz. OPTIONS: Fast inflate/deflate pump, carrying case. SIZES: Small, medium, large, extra-large, or extra-extra large. Cust

Jed-101 Concealed Door Closers

The Jackson Concealed Door Closer is a door closer with extra light springs. Models available for Center Hung, Offset Hung, Overhead Center Hung with extended spindle, and mechanism only.

Jennswing

The Jennswing is a swing with torso support designed for use by children with mobility disabilities. This lightweight, rotational-molded plastic swing provides total body support, including upper and lower torso and legrest support. The swing includes upper torso and waist safety straps and armrests. It can be attached to any standard outdoor swing set, used indoors with its own stand (included), or suspended from the ceiling (proper hooks required). OPTIONS: JennSwing Frame and replacement 5-po

Jetta Jr

The Jetta Jr. is a hydrotherapy unit designed to provide whirpool benefits to the feet and lower limbs. Therapeutic uses of hydrotherapy include, but are not limited to, pain relief, increasing circulation, softening of scar tissue, postoperative rehabilitation, arthritis relief, and the reduction of inflammation or tissue swelling. The unit features 14 hydrotherapy jets, dual silent air controls, a ground fault interrupter, and a handle and casters to enhance portability. It may be used ind

Jobri Mobile Desk Caddy (Model F7300-Xx)

The Jobri Mobile Desk Caddy, model F7300-xx, is a height-adjustable tilt top table that can be used with a recliner or as a freestanding unit. This mobile desk caddy has multiple combinations of height and tilt adjustments, and can be used to hold a laptop or book or for writing. Locking casters help keep it in place and a full lip on the table top keeps items from sliding off. It holds up to 25 pounds. DIMENSIONS: The tabletop adjusts from 30 to 39.5 inches high with a table surface of 16 x 31

Jonvac Vacuum Mattress

JonVac Vacuum Mattress is designed for children with mobility disabilities. It is a mattress that offers a variety of positioning options to help keep a child comfortable while resting. The JonVac Vacuum Mattress is designed with a lasting mold, but is easy to remold for the child’s unique need. OPTIONS: JonVac Electronic Pump and JonVac Foot Pump. SIZES: Please speak to us about sizes and suitability of each bed, cot or sleeping system. WARRANTY/GUARANTEE: As stated by the manufacturer.

Jumbo Atomic Clock With Remote Thermometer (Model Jmr838Wfa)

The Jumbo Atomic Clock with Remote Thermometer, model JMR838WFA, is a low vision digital wall clock and outdoor thermometer designed for use by individuals with low vision. This desktop or wall-mount clock for home or office displays the time in large digits on a liquid crystal display (LCD) screen. It also displays indoor and outdoor temperatures and the date in smaller characters, and shows pressure trends and local weather forecasts using graphical icons. The clock sets itself automatically t

Jumbo Atomic Wall Clock With Indoor Temperature (Model Jm889Na)

The Jumbo Atomic Wall Clock with Indoor Temperature, model JM889NA, is a low vision digital wall clock and household thermometer designed for use by individuals with low vision. This clock has a large liquid crystal display (LCD) display showing the time in very large digits and the indoor temperature and date in smaller digits. It sets itself automatically to the U.S. Atomic Clock. It also features an alarm with snooze, and can be mounted on the wall or a table stand. DIMENSIONS (HxDxW): 9.5 x

K-M Electrohydraulic Swinging Door Operators (Series 2000)

The K-M Electrohydraulic Swinging Door Operators, Series 2000 is an automatic door operators surface mounted to the top jamb of new or exiting doors. They are completely self-contained with the electrohydraulic operator and controls mounted on a signal backplate and enclosed with an aluminum cover. The doors are available for single or double doors in any swinging configuration. Doors can be controlled to operate independently or simultaneously. Features include electrohydraulic power open and

Kangaroo Chair And Table

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create custom adapted Kangaroo chair and table set for a child with developmental delays. The child has had a Kangaroo chair and table set for several years. The Kangaroo is generally designed to provide well-supported long floor sitting for children up to primary school age, and has a chair with a winged back support and a height-adjustable table. However, the child still needs long periods on floor sitting to stretch his legs and loosen his leg

Kelvin Talking Thermostat

The Kelvin Talking Thermostat is a low vision thermostat designed for use by individuals who are blind or have low vision, mobility disabilities, or severe physical disabilities. This programmable thermostat controls heat, fan, and air conditioner functions. It can be operated by pushing its large tactile buttons, all of which talk, or through voice commands. To initiate voice commands, the user presses a button, claps hands, knocks on a table or desk, or whistles. When a button is pressed, a cl

Keyguard For Keysusee Large Print Kerboard

The Keyguard for KeysUSee Large Print Keyboard is a keyboard designed for those individuals with disabilities that affect upper body mobility, gross or fine motor ability, and/or a person’s ability to use their hands (Parkinson's). This product is only for use with the KeysUSee keyboard. Increases typing speed and accuracy. Frame/handrest prevents accidental keystrokes. Made of thick clear acrylic. Easy to attach and remove with Velcro strips.

Keyless Doorknob Lockset

The Keyless Doorknob Lockset is a keyless door lock designed for use by individuals with fine motor or grasping disabilities or arthritis. This solid brass lockset features a glow-in-the-dark electronic keypad that accepts up to six different entry codes of two to eight digits. Codes can be changed as needed. If an incorrect code is entered four consecutive times, an alarm sounds. This lockset replaces existing hardware and installs with the included mounting hardware. Two keys are included for

Keyless Entry (Model Ke 250)

Keyless door lockset. Electronic pushbutton combination lock. Owner programs 5 digit master code, and secondary code which may be used to provide access to others and can be changed. Tamper alarm and keyboard lock activates when 16 random numbers are pressed. Stainless steel keyboard, weather resistant. Includes keyboard, control module, optional electric door strike, batteries, relay, cables, hardware and instructions.

Keyless Entry (Model Ke275)

Keyless door lockset. Electronic pushbutton combination lock eliminates the need for keys. Control module ($346 to $232) functions include 5 second unlock, 1 to 60 second adjustable shut, momentary or latching contact, and 25 second first touch relay. A five digit combination at the touchpad operates the system to unlock the door. 110 or 220 volt AC option, instant reprogramming at the touchpad, tamper alarm. 5 by 7 by 3 inches. Touchpad ($231 to $116) is waterproof, several finishes available w

Keyless Lockset With Lever Handle

The Keyless Lockset with Lever Handle is a keyless door lock designed for use by individuals with fine motor or grasping disabilities or arthritis. This solid brass lockset features a glow-in-the-dark electronic keypad that accepts up to six different entry codes of two to eight digits. Codes can be changed as needed. If an incorrect code is entered four consecutive times, an alarm sounds. This lockset replaces existing hardware and installs with the included mounting hardware. Two keys are incl

Kick Plates

Kick Plates are protective panels of metal or acrylic plastic designed for use to prevent damage to doors from wheelchairs. Metallic plates have a brass, aluminum, or stainless steel base with a laquered, polished, anodized, or powder-coated surface. OPTIONS: Magnetic mount; adhesive mount. DIMENSIONS (HxW): 6 or 8 x 28, 30, 32, 34, 36, 38, 40, or 42 inches. Acrylic sheets are 0.13 inches thick. COLOR: Metalic plates are available with a polished brass, stainless steel satin, stainless steel pol

Kiddo

Kiddo is a sleeping system designed for children with health and mobility disabilities. It offers removable metal grids or wood slats as well as a 4-part rolling mattress platform. There is an electrically operated backrest that can be adjusted from 0-80 degrees. In addition there is an electrically operated knee break and a handset with a locking device. The Kiddo is equipped with 2 IV (intravenous) pole supports at the headboard.

Kids Porta-Shower Set (Models Psr40-91, Psr40-93 & Psr40-96)

The Kids Porta-Shower Set is a portable handshower with flexible hose and faucet fitting, designed for use by individuals with spinal cord injury or mobility or balance disabilities. This shower set comes with an adapter that connects to most standard faucets and disconnects for portability. DIMENSIONS: The Hose is 60 inches long and the hand shower unit is 9.75 inches long. COLOR: White with decorative picture of fish (model PSR40-91), a seal (model PSR40-93), or an elephant (model PSR40-96).

Kinsman U Drink Adaptable Holder, Model 16060

Kinsman U Drink Adaptable Holder is a device that allows the user to hold and drink a beverage independently. It is intended for people with limited or no grip strength due to spinal cord injury, MS, cerebral palsy, stroke, arthritis or other disabilities. This holder can be adjusted to fit onto bottles, cans, and glasses of all different shapes, sizes, and materials.

Kitchen Cabinet Accessories.

Kitchen cabinet accessories. Combination pull out cutting board and drawer with slits for knives. Base cabinet with extra wide drawer unit with 2 side out trays. Divided pot lid slide out basket. Utility, vegetable slide out basket drawer. Cutlery tray with wooden dividers in drawer. Back of the counter storage space with tambor roll up door. Complete line of base cabinets designed for use by handicapped individuals using wheelchairs. Toe space height has been increased to clear wheelchair foot

Kitchen Carousel

Automated shelving system provides over 30 square feet for kitchen storage in a unit only slightly larger than a refrigerator. Shelves rotate vertically by pushing a button. All stored items are accessed at one convenient height. Electronic circuitry includes numbered key pad panel with space to isentify contents of each of the 14 shelves. Shelf dimensions: 28 1/4 inches wide, 11 inches deep, 9 inches high. Cabinet: 39 inches wide, 31 1/2 inches deep, 92 incehs high. 110 VAC. Designed to accept

Kitchen Faucet

Two handle kitchen water faucet with horizontal 12 inch spout.

Kitchen Faucet.

Single lever and tricorn handle kitchen faucets. Some with longer spouts. Large variety of styles.

Kitchenaid Single Drawer Dishwasher (Models Kudd03Stss, Kudd03Stwh, Kudd03Stbl, & Kudd03Stpa)

The KitchenAid Single Drawer Dishwasher is an under counter dish washer designed for use by individuals who use wheelchairs. Features include a variety of wash and rinse cycles, hard food disposal, a fan to dry dishes after washing, a rack system with flexible and removable tines and a cup shelf, sound insulation, optional automatic adjustment of temperature and cycle time, and a mesh bag to hold small or lightweight items. OPTIONS: Custom panel accessory (model KUDD03STPA). DIMENSIONS (HxDxW):

Knee Wedge Sleep Aid

The Knee Wedge Sleep Aid is body positioner designed for use by individuals with lower back pain or lower extremity disabilities who require knee elevation while lying on their back. The cushion comes with a washable cover. DIMENSIONS (HxL) 5.5 x 18 inches. COLOR: White cushion with blue cover.

Knob For Gas Connector

CUSTOM ADAPTATION PURPOSE: To enable an individual to connect a portable gas heater in different rooms. The bayonet fitting for the portable heater required that the knob be pushed and turned simultaneously. A new, larger knob was fabricated with a scalloped edge rather than a knurled edge. TITLE: Retirement Projects. JOURNAL: TAD Journal. REF: Volume 27, Number 2, August 2007: p. 14-15. PAGES: 3 (including cover).

Kohler Baths And Whirlpools

Kohler Baths and Whirlpools are bathtubs and whirlpool bathtubs designed for use by people with physical disabilities. The manufacturer offers 16 models, 13 of which are available in standard or whirlpool bathtub models. The Guardian, Repartee, and Mendota models are available only as standard bathtubs; and the Hourglass 30 is available only in a whirlpool version. COLOR: A choice of colors is available.

Kohler Countertops

Kohler Countertops are accessible vanities designed for use by people with disabilities. Countertops are available in 22 models, and are constructed either of vitreous china or Kohler cast iron. DIMENSIONS: Faucet drillings are 4, 8, or 12 inches; lengths range from 18 to 37 1/8 inches and widths range from 14 to 21.75 inches; basin depths range from 4.5 to 7 inches; minimum rim height installed is 34 inches. COLOR: A choice of colors is available.

Kohler Faucets

Kohler Faucets are lever tap handle faucets designed for use by people with physical disabilities. The manufacturer offers 11 models, most for use in a variety of situations, including kitchen, lavatory, bath, and shower. Three models are also available with wristblade handles.

Kohler Flush-Valve Toilets

Kohler Flush-Valve Toilets are tall toilets designed for use by people with disabilities. Available models include the Highcliff Water-Guard, Highcliff Lite, Highcrest Water-Guard, Kingston Water-Guard, and Kingston Lite. All models have an elongated bowl style. Both Highcliff models and the Highcrest Water-Guard are floor-mounted with floor outlets; the Kingston Models are wall-mounted with wall outlets. OPTIONS: Bedpan lugs are available on all models. DIMENSIONS: Lengths range from 25 5/8 to

Kohler Freewill Barrier-Free Bath And Shower Module (Models K-12103 & K-12104)

The Kohler Freewill Barrier-Free Bath and Shower Module, models K-12103 and K-12104, is a shower bathtub designed for use by people with physical disabilities. The unit includes slip-resistant floors, and a lift-out transfer seat. It is available with either a left or right side drain. The module is made of acrylic and comes with grab bars made of either brushed stainless steel, polished stainless steel, or nylon. COLOR: White, almond, sunlight yellow, ice grey, biscuit, cashmere, sandbar, or te

Kohler Glenbrook Semi-Recessed Drinking Fountain

The Kohler Glenbrook Semi-Recessed Drinking Fountain is an accessible fountain designed for use by people with physical disabilities. The fountain is constructed of vitreous china. DIMENSIONS: 14.25 x 26 5/8 inches. COLOR: A choice of colors is available.

Kohler Tank-Style Toilets

Kohler Tank-Style Toilets are tall toilets designed for use by people with disabilities. Models include the Highline Water-Guard, Highline Lite PC, Northline Water-Guard, Wellesly Water-Guard, and Barrington Water-Guard. All models use an elongated bowl style. The Wellesley Water-Guard is a wall-mounted, wall-outlet model; all others are floor mounted with a floor outlet. OPTIONS: Most models have tank locks, bedpan lugs and an Insuliner tank lining available. The Insuliner is included with the

Kohler Touchless Electronic Faucet (Models K-10950-4 & K-10951-4)

The Kohler Touchless Electronic Faucet, models K-10950-4 and K-10951-4, is an electronic faucet designed for use by people with physical disabilities. This brass faucet for single-hole mounting has a TriPoint electronic infrared sensor that activates the unit when a hand is placed beneath it. A mixer handle allows the user to adjust the water temperature. The flow rate is 0.5 gallons per minute. A flexible hose and stainless steel mounting hardware are included for installation. OPTIONS: Aerator

Kohler Wall-Mount Lavatories

Kohler Wall-Mount Lavatories are accessible lavatories designed for use by people with disabilities. The Kingston, Morningside, Greenwich, Chesapeake, and Jamestown models are available. All models are constructed of vitreous china, and most require a Kohler offset drain. DIMENSIONS: Faucet drillings are 4, 8, or 11.5 inches; lengths range from 18 to 24 inches and widths range from 15 to 20 inches; basin depths range from 5.25 to 6.75 inches; minimum rim height installed is 34 inches. COLOR: A c

Kurled Grab Bars

Kurled Grab Bars, model 22120, are wall grab bars designed for use by individuals with balance or mobility disabilities. Grab bars have a kurled finish and are made of heavy-wall chrome-plated steel tubing. Mounting hardware is included. DIMENSIONS: Available lengths are 12, 16, 18, 24, or 32 inches. Diameter is 1 inch.

Kwikset Delta Door Lever

The Kwikset Delta Door Lever is an interior or exterior door lock with lever handle designed for use by individuals with grasping disabilities. This straight-blade-style lever handle is non-handed and is available with a keyed lockset for exterior use, a pushbutton lock for interior privacy use, or without a lock mechanism. COLOR: Lifetime brass, polished brass, antique brass, antique nickel, polished chrome, or satin chrome finish.

Kwikset Dorian Door Lever

The Kwikset Dorian Door Lever is an exterior or exterior door lock with lever handle designed for use by individuals with grasping disabilities. This hook-ended lever handle is non-handed and is available with a keyed lockset for exterior use, a pushbutton lock for interior privacy use, or no lock mechanism. COLOR: Satin nickel, ifetime brass, polished brass, antique brass, antique nickel, Venetian bronze, polished chrome, or satin chrome finish.

Kwikset Signature Series Door Levers

Kwikset Signature Series Door Levers are lever door handles designed for use by individuals with grasping disabilities. Levers come in a variety of handle styles, including Ashfield, Avalon, Brooklane, Commonwealth, Pembroke, Lido, and Tustin. Most handle styles are curved, with or without scrolling. The Ashfield handle is straight and thick. Most styles are handed. Tustin is a reversible handle style that fits both right handed and left handed doors. The handle is available with a keyed lockset

Laborsaver Button Station

The Laborsaver Button Station is an elevator call button system designed to lower existing elevator hall buttons to wheelchair level without rewiring. The fixture is surface-mounted to the existing station, eliminating any need for piping, rewiring, patching, or the installation of a new electrical wall box. The device features a backplate that bolts to the existing hall station box. The prewired electrical harness is butt spliced to the existing wiring and the faceplate is then attached to the

Ladder To Assist Getting Out Of Bath

CUSTOM ADAPTATION PURPOSE: To provide a customized bracket and ladder system for use in getting in and out of the bath unaided for a person with mobility disabilities. A bracket is mounted on a stainless steel plate, and a fixed stainless steel tube is welded onto the plate. A smaller diameter inner tube with a 500 millimeter (mm) long piece of tube is welded at 90 degrees, creating an L-shape that sits in the outer tube and rotates from flush against the wall to 90 degrees from the wall. Hangi

Laguna Walk-In Bathtub

The Laguna Walk-In Bathtub is an accessible bathtub designed for use by individuals with balance or mobility disabilities or arthritis. This extra-large walk in tub has a wide door with left or right hinges, a low doorway entry level, a contoured seat and back rest, and thermostatically controlled water temperature. OPTIONS: Lever, cross head, or contemporary style faucets; bathtub hand grips; hydrotherapy spa system; shower option; and shower canopy for the hanging of shower curtains. DIMENSION

Lamp Switch Enlarger

The Lamp Switch Enlarger is a knob turner designed for use by individuals with grasping disabilities, arthritis, or limited hand strength. Designed for use without the need of electrical connections, this device fits over the existing switch to provide an easier grasp.

Lamp Switch Extension Lever (Model 6386)

The Lamp Switch Extension Lever, model 6386, is a knob turner for use on table lamps by persons with grasping disabilities. The lever has three spokes and can be operated from any direction. It fits most lamp threads. Latex free.

Lap King Wheelchair Lap Desk

The Lap King Wheelchair Lap Desk is a wheelchair lap tray designed for use by wheelchair users. The Lap King is constructed of a two-sided detachable lap tray made of ABS plastic that is attached to a U-shaped microbead fill cushion. The lap tray is reversible with one side having a flat surface on which the user can write, read or eat; and the other side has a dimpled surface that allows the heat generated by a laptop computer to disperse and the computer to remain cool. Both sides of the lap

Laptop Laidback Ergonomic Laptop Table

The Laptop Laidback Ergonomic Laptop Table is a bed desk that allows laptop users to be completely reclined. The height and angle of the laptop table surface can be micro-adjusted to accommodate an individual’s body size and arm length. The ergonomic design of this laptop table keeps the user's arms and elbows in a flat resting position while allowing the palm and fingers to lie flat on the keyboard.

Large In-Line Switch

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with upper extremity disabilities to oprate a lamp. A small stained and varnished wooden box was built to contain two electrical boxes. One electrical box is for a large rocker switch and the other box is for a regular 120- volt receptacle. It is connected to a three-wire supply cable complete with plug, recycled from an old refrigerator. The wiring is arranged so that the rocker switch controls the power to the receptacle. The wooden box

Lavatory Mounted All Purpose Soap Dispenser (Model 0332)

The Lavatory Mounted All Purpose Soap Dispenser, model 0332, is a pump-top soap dispenser designed for use by individuals with grasping or fine motor disabilities. The unit's corrosion-resistant valve dispenses viscous lotion soaps and synthetic detergents. Polyethylene globe fills from the top and holds 20 or 34 fluid ounces. The free turning spout and stem are stainless steel with bright finish. The escutcheon is chrome-plated brass. The adjustable threaded shank allows for installation in cou

Lazlight

The LazLight is a low vision light designed for use by individuals with vision disabilities. This high-performance reading lamp offers 700-foot candles of pure intense glare-free white light without blue light radiation. Features include a 4,000-hour bulb, a dimmer switch, and an adjustable gooseneck. OPTIONS: Replacement bulbs are available. WARRANTY: 12-month warranty that includes parts, labor and the light bulb.

Lazy Susan / Corner Susan

The Lazy Susan/Corner Susan is a lazy susan for cabinets designed for use by individuals who have difficulty reaching to the back of shelves. This revolving, three-quarter round pie-cut tray has a non-slip surface and can hold 35 pounds per shelf when the weight is evenly distributed. It is available in shelf-mounted or post-mounted versions for framed or frameless cabinets in the manufacturer's Arena Champagne cabinet accessory collection. DIMENSIONS: Tray diameter is 24, 28, or 32 inches.

Led Fiber Optic Softie

The LED Fiber Optic Softie is a sensory integration product that allows the user to sit comfortably on a beanbag with fiber optics to hold, look at, touch and feel, creating a visual and tactical experience. It can be used to calm and relax or stimulate depending upon whether the Calming or Superactive Model is purchased.

Legacy Residential Elevator

The Legacy Residential Elevator is a home elevator designed for use by individuals with walking, mobility or lower extremity disabilities or arthritis and others who use wheelchairs or have difficulty walking up or down stairs. This elevator requires no mechanical room. It is operated by an inverted controlled winding drum unit utilizing steel core aircraft wire rope, which can be installed the top or bottom of the hoistway, making the Legacy a good option when there is no space for a separate m

Lever Door Handle

DO IT YOURSELF ENTRY --- PURPOSE: To provide a means for individuals with arthritis, spinal cord injury, or upper extremity disabilities to open doors. Included in a chapter entitled "Housekeeping & Getting Around," this article provides detailed instructions and illustrations for creating a lever door handle. A pipe hanger bracket is attached horizontally to a doorknob with a radiator hose clamp. Prongs and sharp edges are covered with plastic tape. Plastic tape can also be used to cover th

Lever Door Handle Extension

CUSTOM ADAPTATIONPURPOSE: To enable an individual with upper extremity disabilities to open a residential fire door with an automatic closer. A lever made of lightweight aluminum tubing with rubber tips at each end was attached to the existing small lever handle with two hose clamps. This enabled the user to grasp the handle with both hands to turn it and use body weight to pull the door open. DIMENSIONS: The aluminum tube is 20 centimeters long. TITLE: Opening Gambit. JOURNAL: TAD Journal.

Lever Extender

The Lever Extender is an extension handle for a recliner designed for use by individuals with upper extemity or balance disabilities. Made of heavy-duty padded steel, this handle attaches with four bolts to the existing handle used to raise the footrest of a recliner. DIMENSIONS (LxW): 9 X 7 inches. WEIGHT: 2 pounds.

Lever Faucet Handle.

Wide selection of single and two handle lever water mixers for bathroom and kitchen.

Lever Handle Lock (Model 2835)

The Lever Handle Lock, model 2835, is a keyless exterior door lock with lever designed for use by individuals with fine motor, grasping, or upper extremity disabilities. This lock has levers on the inside and the outside, with a passage function that allows the outside lever to remain unlocked while the function is set. To enter from the outside while the door is locked, the user punches in the secret code, then pushes down on the lever. To exit, or to enter while the door is unlocked, the user

Leveron Door Lever

The Leveron is a door handle lever designed for use by individuals with grasping and other upper extremity disabilities. The device fits over conventional round door knobs to provide a lever handle and features an opening to allow full key access. The Leveron is constructed of high impact resin, fits left or right door openings, and is suitable for indoor or outdoor use. A plastic installation wrench is included. COLOR: Almond, antique brass, silver, dark bronze, and hi-glow white.

Levon Door Handle

The Levon Door Handle is a lever door handle designed for use by individuals with fine motor or grasping disabilities. Designed for heavy-duty residential or light and medium-duty commercial use, it is available on inside only of deadlatch and keyed functions. The lever is zinc-based and brass, bronze, or stainless steel plated. DIMENSIONS: Length of lever arm is 2-9/16, 3-3/32, or 3-3/16 inches.

Liberty Assist Grab Bars (500 Series)

Liberty Assist Grab Bars, 500 series, are grab bars designed for use by individuals with balance or mobility disabilities. Bars are straight and made of chrome plated brass, polished brass, or polished stainless steel. DIMENSIONS: 9, 12, 16, 18, 24, 30, 32, or 36 inches long. COLOR: Brass, chrome, stainless steel, or white.

Liberty Crib

The Little Miss Liberty Crib is a circle bed designed to promote infant safety and provide an unrestricted view for the developing child. The crib offers easier child access to parents and eliminates the dangers of sharp corners found on standard cribs. Wood buttons are included to cover hardware. OPTIONS: Sheet set, watterproof pad, and mattress pad. DIMENSIONS: The crib is 45 inches in diameter and fits under any 8-foot ceiling. COLOR: Standard crib finishes include matte white, matte ivory, a

Liberty Lift

The Liberty Lift is a platform pool lift designed for use in pools by individuals with mobility disabilities. This lift can be used for residential applications and light commercial locations such as hotels, motels, and HOA pools. The large platform will accommodate a user in a wheelchair, and can be lowered up to 38 inches below deck level. The platform tilts out of the way so the entire pool can be utilized for therapy or recreation. The lift comes with an anchor and a handheld, waterproof sub

Liberty Walk In Tub (Model Xtw5026)

The Liberty Walk In Tub, model XTW5026, is a walk in bathtub designed for use by individuals with balance, lower extremity, or mobility disabilities. This single-piece fiberglass bathtub has a side door and a polyester gelcoat finish, and is available with a right- or left-hand drain. Other features include waste/overflow, safety assist bar, standard valve, tub filler, and hand shower package. OPTIONS: Jetted version with water and air jets; deck extension and curtain and rod. DIMENSIONS (HxDxW)

Life Lift

The Life Lift is a hydraulic weatherproof wheelchair lift that installs on any flat surface, and is designed for people with limited mobility. It has a 3 by 4 foot non-skid platform with retractable ramp with a hinged plate to prevent a wheelchair from rolling off while elevated. The lift also has an emergency hand lowering system if power fails. The motor does not operate in downward motion; instead, the downward operation of the lift is activated hydraulically by an open solenoid valve. The ga

Life Safety Exit Devices (Models 8100, 8200, 8300, 8400, 8500, 8600, 8700, 8800, & 8900)

Life Safety Exit Devices are panic bars designed for use by individuals with grasping, fine motor, or mobility disabilities. Models include a panic bar with a surface vertical rod for wood and hollow metal doors (8100), a panic bar with a narrow stile surface vertical rod for aluminum doors (8200), a panic bar with a mortise exit device for wood and hollow metal doors (8300), a panic bar with a narrow stile mortise for aluminum doors (8400). a panic bar with a concealed vertical rod for hollow m

Lift Button Depressor

CUSTOM ADAPTATION PURPOSE: To enable an individual in a wheelchair to reach elevator buttons. Made from lightweight telescoping aluminum tubing, this wand has a plastic grip and collapsesw when not in use. The device caqn be carried in a holster on the wheelchair or in a purse or storage pack. DIMENSIONS: The extended length is 850 millimeters and folded the device is 390 millimeters long. TITLE: Tried and Tested. JOURNAL: TAD Journal. REF: Vol. 12 no. 1, Autumn 2001: p. 18. PAGES (including c

Lift Chair

CUSTOM ADAPTATION PURPOSE: To enable an individual with dermatomyositis to use a chair. Because the individual was unable to get out of a chair independently, she often had to stand for long periods. Commercially-available lift chairs did not placer in the position she needed in order to stand. The custom-made chair started with a padded, vinyl-covered executive-style office chair which removed from its star-shaped wheeled base. The chair was bolted to a rectangular base tig welded together fro

Light Switch Extender (Model 557182)

The Light Switch Extender, model 557182, is an extension for standard wall light switch, designed for use by individuals of short stature and wheelchair users. This handle lowers a regular height light switch to a more convenient height. A rubber cap fits over the light switch knob. Push up on plastic rod to turn light on, pull rod down to turn light off. Latex free. DIMENSIONS: 14 inches long.

Light Switch Extension Handle

DO IT YOURSELF ENTRY --- PURPOSE: To provide a means for individuals with arthritis, spinal cord injury, or upper extremity or mobility disabilities to turn light wall switches on and off. Included in a chapter titled "Housekeeping & Getting Around," this article provides detailed instructions and illustrations for creating a simple extension for light switches. A small hole is drilled in the end of the light switch and a corresponding hole is drilled in the end of an acrylic rod or wooden

Light-It 4 Led Sensor Light

Light-It 4 LED Sensor Light is a product intended to increase the amount of light to an area for individuals with severe pain and limited mobility such as arthritis and gout. These sensor lights can be added to any stairway, hallway or pathway. This nightlight provides light coverage for use in any room of the house. The light automatically turns on at the detection of any motion and automatically shuts off after 20 seconds. Stays on with continuous motion. Place anywhere in your home. Easy to

Light-It 4 Led Sensor Light

Light-It 4 LED Sensor Light is intended to increase the amount of light to an area for individuals with severe pain and limited mobility such as arthritis and gout. These sensor lights can be added to any stairway, hallway or pathway. This nightlight provides light coverage for use in any room of the house. The light automatically turns on at the detection of any motion and automatically shuts off after 20 seconds. Stays on with continuous motion. Place anywhere in the home. Easy to use, peel

Lightweight Half Step

This Lightweight Half Step is designed for persons with limited lower body mobility or anyone with walking disabilities. It is for those who find going up or down steps challenging. The Lightweight Half Step is designed to reduce the step height for older and for disabled people. It can be used indoors or outdoors. Made from durable recycled heavy duty plastic. Stable in sunlight and freezing conditions. Top of step has a cross hatch design providing a textured, nonslip service. Can be leveled b

Lil' Desk Mate

The Lil' Desk Mate is a height adjustable tilt desk designed for use by individuals with physical disabilities. This height-adjustable desk features a wide T-shaped base with locking casters and a two-section table top. The desk adjusts for right or left hand use. The smaller section of the table is fixed in a flat position, while the other can be used flat or tilted to support laptop computers, books, or papers. The Lil' Desk Mate's base can roll under most sofas, chairs or beds to position the

Literamp Portable 1-Piece Wheelchair Ramp

The LiteRamp Portable 1-Piece Wheelchair Ramp is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury or others who use a wheelchair or scooter. The ramp has carrying handles, folds in the middle, and can be carried like a suitcase. It is made from aircraft aluminum, and it is fully covered with safety non-skid tape. This ramp is weather resistant so it can be left outdoor year-round. It is self-supporting to prevent slippage on sta

Literamp Portable 2-Piece Wheelchair Ramp

The LiteRamp Portable 2-Piece Wheelchair Ramp is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. The ramp can be taken apart into two separate pieces side by side. Each piece folds length-wise and has two handles so it can be carried like a suitcase. The ramp can accommodate 3-wheel scooters as well as manual or electric wheelchairs. It can be used on curbs, decks, and steps; on side doors of vans; on back doors of most vans an

Liteshower Recliner Model

The LiteShower Recliner Model is a portable accessible shower stall designed for use by individuals with mobility or severe physical disabilities. The unit consists of a shower tray with collapsible walls to facilitate roll-in access; a folding screen and curtains that close around the sides; a handheld showerhead on a 7-foot hose that connects to a faucet; and a pump for draining the tray after the shower. The tray is placed on the floor near a faucet and a sink or toilet. The user reclines on

Liteshower Shower-In-Bed Model

The LiteShower Shower-in-Bed Model is a bed shower designed for use by individuals with mobility or severe physical disabilities. It allows a person to remain in bed during a shower. The unit includes a shower tray with collapsible walls for easy access, which is placed on top of the bed; a handheld shower head with a 7-foot hose that connects to a shower or faucet; and a waste water disposal pump. The user showers with a handshower connected to a faucet. After the shower, an electric pump drai

Liteshower Standard Model

The LiteShower Standard Model is a portable shower stall that is accessible to wheelchair users and other individuals with mobility disabilities. It consists of four components: a handheld shower head with a 7-foot hose that connects to a shower or faucet; a tray large enough to fit a wheelchair and occupant with collapsible walls for roll-in access; a free-standing screen that surrounds the shower on all four sides; and a waste water disposal pump. The unit's shower tray is placed on the floor,

Liteshower Tall Model

LiteShower Tall Model is a portable accessible shower stall designed for use by individuals with mobility disabilities. It consists of four components: a handheld shower head with a 7-foot hose that connects to a shower or faucet; a tray large enough to fit a wheelchair and occupant with collapsible walls for roll-in access; a free-standing screen that surrounds the shower on all four sides; and a waste water disposal pump. The user stands to shower in this portable stall, which also can be ente

Litetouch Lighting Control System

Lighting control systems have control modules that are wired into a house's electrical system. Each module can handle 2 to 6 independent incandescent loads (maximum 15 amps per load) of which 2 or 4 may be dimmers. Relay modules can be used for florescent, low voltage and higher load switching and are capable of handling up to four independent 20 amp loads. Lighting can be turned on/off individually or programmed to create functional light paths. Master panels are available for complete control

Living Ramp

The Living Ramp is a modular ramp for persons with mobility disabilities requiring assistance in negotiating walkers and wheelchairs into and out of homes and buildings. The corrosion-resistant, all-aluminum, anti-slip ramp is lightweight, portable and flexible enough in design to be placed around corners. Guaranteed not to crack, crumble, splinter, rot or rust, the ramp is designed with 32 inch handrails to provide easy gripping for wheelchair users. The ramp is shipped in sections and require

Lmd Elevating Deck

The LMD Elevating Deck is an elevating deck designed for use by individuals with mobility disability or spinal cord injury. This elevating deck can be installed on a yacht or a land dock to provide dock to deck wheelchair access for a yacht, dinghy, ski boat, or personal watercraft. It can also be used on a porch to provide wheelchair access to a recreational vehicle (RV). The deck raises, lowers, and stops smoothly at any point in between. Decks are custom designed in size and shape with hydrau

Lombard Bathtub Handrail

Stainless steel straight grab bar, 1 1/4 inch diameter. Adjusts and locks to desired length, no screws. For installation in 3 wall tub alcove with tile walls. 54 or 56 inches long.

Long Tub Assist Bar

The Long Tub Assist Bar is a grab bar for the bathtub designed for use by individuals with balance or mobility disabilities. Made of heavy-duty plastic, this bar adheres to the tub or wall using the large suction cup at each end. The bar can be used horizontally or vertically. Flip tabs release the bar for repositioning. DIMENSIONS: 16.5 inches long. The suction cups are 4 inches in diameter. COLOR: White with green tabs.

Lounge Modification

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a lounge modification for seniors and individuals with mobility disabilities to make it easier to get up from a lounger (i.e. couch) that is low to the ground. This adaptation was created for a woman who found it increasingly difficult to stand up after sitting on her couch due to increase muscle weakness in her upper legs. The couch was set very low to the floor so extra strength was required to rise up to a standing position. A TAD volunt

Low H Base Overbed Table (Model 11640)

The Low H Base Overbed Table, model 11640, is an overbed table designed for use by individuals with mobility or severe physical disabilities whose bed has low clearance. The table has a four point H-shaped base with four dual wheel nylon casters, two of which lock. Plastic glides are also included to replace the casters. The table also features spring-loaded height adjustment. DIMENSIONS(LxW): 26.38 x 15.25 inches (base); 30 x 15 inches (tabletop). The height with casters adjusts from 19.75 to 2

Low-Rise Walk-In Bathtub (Models 6032, 6032-S, & 6042)

The Low-Rise Walk-In Bathtub is an accessible bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. Models 6032 and 6042 are available with or without a bench-style seat; model 6032-S has a sloping back wall with integral arm rests and no seat. Model 6042 is wider to accommodate larger users. All tubs have a slip-resistant floor and seat (where applicable). The tub is made from stainless steel, vacuum-formed high gloss acrylic, and fiberglass, and is

Lp11 Mobile Lifting Platform

The LP11 Mobile Lifting Platform is an interior or exterior wheelchair lift and wheelchair lift for rail cars designed to aid people in wheelchairs to enter and exit structures with doorways above ground level or trains with doorways that are above the level of the train station platform. The lift has railings on both sides and ramps on both the front and back ends that can drop down past horizontal and raise into a vertical position. It has a base with four wheels so it can be moved into positi

Lp12 Lifting Platform

The LP12 Lifting Platform is an interior or exterior wheelchair lift and wheelchair lift for rail cars designed to aid people in wheelchairs to enter and exit raised platforms or stages, structures with doorways above ground level, or trains with doorways that are above the level of the train station platform. The LP12 has a wheeled base, and it is moved into position before use with a control arm that extends from one side of the base. There is a central wheel lock to fix the unit’s position. T

Ls400 Toilet Lift

The LS400 Toilet Lift is a portable toilet seat lift and commode with seat lift designed for use by individuals with lower extremity or mobility disabilities. The unit can be wheeled from room to room and bedside to bathroom with its ergonomic rear push bar for use as a power bedside commode or over-the-toilet motorized lift. During toilet transfer, it reduces the physical force required by caregivers to help users on and off the toilet. The LS400 can be configured as a height-adjustable toilet

Ls600 Bariatric Toilet Lift

The LS600 Bariatric Toilet Lift is a portable toilet seat lift and commode with seat lift designed for use by heavy individuals with balance, lower extremity or mobility disabilities. The unit can be wheeled from room to room and bedside to bathroom using a rear push bar. for use as a power bedside commode or over-the-toilet motorized lift. During toilet transfer, it reduces the physical force required by caregivers to help users on and off the toilet. The LS600 can be configured as a height-adj

Lubidet

Lubidet is a personal hygiene system for men, women, and children. This add-on toilet bidet is designed to deliver instantly warmed fresh water for cleansing and either warmed or unheated air for drying. The device provides a hands-free wash with fresh water only; there are no added chemicals in the water wash. The device is installed between the toilet seat and the bowl for either right or left hand operation. The heating unit hangs on the wall. The control unit swivels the spray arm into posit

Lumea Controls

Lumea Controls is a lighting control system designed for use by persons with physical disabilities. It features a sliding, light lever engineered for dimming capabilities and a push button to maintain a selected lighting level. The system is also designed with surge protection, power failure memory, radio frequency interference (RFI) suppression and voltage compression - reduces changes in lighting level when other electrical appliances are switched on/off. In addition, this control also works w

Lumex Adjustable Height Versaframe Toilet Safety Rail (Model 6460A)

The Lumex Adjustable Height Versaframe Toilet Safety Rail, model 6460A, is an adjustable height toilet frame designed for use by individuals with mobility disabilities. The contoured waterfall armrests provide a comfortable gripping surface. The anodized aluminum frame secures to most toilets. OPTIONS: Rails for safety frame (6460R). DIMENSIONS: Arm height adjusts from 28 to 32 inches. Arm width adjusts from 18 to 21 inches. CAPACITY: 250 pounds. WARRANTY: Lifetime limited warranty.

Lumex Chrome Grab Bars (Models 2012A, 2016A, 2018A, 2019A & 2021A)

Lumex Chrome Grab Bars, models 2012A, 2016A, 2018A, 2019A and 2021A, are wall mounted grab bars designed for use by individuals with balance or mobility disabilities. Made of durable chrome plated steel with knurling to provide a good gripping surface, the bars can be mounted vertically, horizontally, or diagonally 1.5 inches from the wall. The bars are straight. DIMENSIONS: Length is 12 inches (2012A), 16 inches (2016A), 18 inches (2018A), 24 inches (2019A), or 32 inches (2021A). CAPACITY: 250

Lumex Versaguard Coated Grab Bars (Models 40033A, 40133A, 40233A & 40333A)

The Lumex VersaGuard Coated Grab Bar, models 40033A, 40133A, 40233A and 40333A, is a wall-mounted grab bar designed for use in showers and bathtubs to assist persons with balance or mobility disabilities. This straight bar is made from heavy duty steel with a rust resistant enamel coating. The bars can be mounted vertically, horizontally or diagonally, and when mounted, is 1.5 inches from the wall. DIMENSIONS: 12, 16, 18, 24 or 32 inches. CAPACITY: 250 pounds. WARRANTY: Lifetime limited warranty

Luxe Wardrobe Automation

The Luxe Wardrobe Automation closet conveyor system is a motorized clothes rack designed for individuals with mobility disabilities, arthritis, other physical disabilities, or seniors. This system brings clothing to the user with the push of a button or touch of a foot, at a height appropriate for the user. The system is available in the standard straight line conveyor (oval configuration) High-Low, L-shaped, U-shaped, or V-dip conveyor. Hand or foot controls are available and speeds are variab

Luxury Lift 950 Hydraulic Elevator

The Luxury Lift 950 Hydraulic Elevator is a home elevator designed for use by individuals with mobility or walking disabilities. This hydraulic elevator features a large cab with a large payload capacity, and can travel up to 50 feet at a speed of 40 feet per minute. It has cab walls made from 7-ply custom cabinet grade material. The cab and its interior are custom made, and come with an aluminum anodized scissor gate or accordion style solid gate. The elevator's automatic emergency-lowering fea

Lynx Ergoheight 17-Inch High Elongated Toilet (Model 21-618)

The Lynx ErgoHeight 17-Inch High Elongated Toilet, model 21-618, is a tall toilet designed for use by individuals with mobility disabilities. This 1.6 gallons per flush (gpf) toilet has an elongated bowl; front jet flusing action; gravity-fed flush; a fully glazed trapway; a reverse trap; a color-matched tank lever located on the front; and two bolt caps. DIMENSIONS (HxDxW): 31 7/8 x 27.75 x 19 1/8 inches. Rim height is 17 inches; rim to water surface is 6.25 inches; water seal is 2 1/8 inches.

M Series Mortise Locks With Levers

The M Series Mortise Lock with Levers is an exterior door lockset with lever handles designed for accessibility to individuals with grasping or fine motor disabilities. Levers are flat with an angled end. Right hand is standard, left hand optional. This heavy duty hardened steel lockset has a solid brass cylinder (5, 6, or 7 pin) and two stainless steel faceplates (armored faceplate in front). Heavy duty through-bolted inserts clamp the trim on the door assuring proper alignment. Two nickel silv

Maax Velvet Whirlpool Tub (Model 6636)

The Maax Velvet Whirlpool Bathtub, model 6636, is a whirlpool bath designed for use by individuals with arthritis. The tub is made of acrylic material which is warm to the touch and has built-in armrests and an ergonomic headrest. A headrest channel allows water to drain. The spacious interior has a textured bottom. The tub is designed for alcove or drop-in installation. OPTIONS: Available massage systems include Backmax, Bubble Tub, Hydrosens, Combined Hydrosens and Bubble Tub, or Whirlpool 10

Magic Basin

The Magic Basin is a an accessible sink with a hands-free electronic faucet designed for use by individuals with fine motor or upper extremity disabilities. Sensors in the basin's tap fittings detect the position of hands in the basin and control the water flow and temperature accordingly. In the factory setting, designed for use in public areas, placing hands in the middle of the basin activates the faucet and produces a warm water flow. The faucet is deactivated by removing hands from the wate

Magic Faucet

The Magic Faucet is an electronic faucet designed for use by individuals with fine motor, grasping, or upper extremity disabilities. This faucet allows an individual with limited use of the hands to control water flow and temperature by touching the tap fitting or by moving the hand into the vicinity of the outlet (a distance of approximately two centimeters). The flow of water is ended by removing hands or by moving the hands or fingers through the flow of water. The faucet comes with 10 progra

Magic-Access Door Operator

The Magic-Access Door Operator is a powered door operator designed for use by individuals with mobility or neurological disabilities or spinal cord injury. This unit can automate new or existing swing doors made of wood, metal, or glass. When the unit is installed, the door operates as a manual door with the option of activation from a pushbutton, wall-switch, or card reader. The Magic-Touch feature opens the door automatically when it is moved 3 degrees or more. The door opens under power and s

Magic-Force Door Operator

The Magic-Force Door Operator is a powered door operator designed for use in making commercial and public buildings accessible to individuals with mobility disabilities. The unit includes Magic-Touch activation, which can open a door when the user gives it a slight touch or push. The unit can be installed in supermarkets, department stores, hospitals, airports, office buildings, public buildings, schools, and universities, and is field selectable for full energy applications (ANSI A156.10), heav

Maintenance Sign With Braille (Model Rsme-420)

The Maintenance Sign with Braille, model RSME-420, is a braille and tactile sign designed for use by individuals who are blind or have low vision. This sign features the word, "Maintenance," in raised print with the Grade II braille equivalent just under the printed text. This surface mount sign has an acrylic core with a laser-engraved top color layer that provides a tactile feel and a matte finish for better visibility. The unit is available with permanent acrylic adhesive with removeable bac

Maitre D'oor, The

The Maitre D'oor is a powered sliding door operator designed for use by individuals with upper extremity, mobility, or severe physical disabilities or spinal cord injury. This unit fits most sliding doors and can be used on existing doors with right- or left-hand openings. Features include six door speeds, six delay settings to adjust the time the door stays open before closing, a closing signal to alert to door closing, a doorbell for use when the door is in locked mode, and remote echo to aler

Makita Automatic Drapery Opener System

The Makita Automatic Drapery Opener System is a powered drapery control system designed for individuals with a physical disability. The system can carry over 60 pounds of draperies over a 20 foot span at a track speed of ten inches per second. Another motor can be added if this capacity needs to be exceeded. The Opener automatically self centers draperies and has an automatic stop. It also incorporates an automatic cut-off to help prevent motor overheating. The motor has a slip clutch mechanism

Marathon Table

The Marathon Table is a height-adjustable computer workstation designed for use by individuals who use wheelchairs or who stand to work. Depressing a release paddle enables immediate, yet controlled, surface height positioning. A two-way brake locks the work surface in both upward and downward directions. For user safety, a weight-sensing interlock releases the brake only when the table is properly counterbalanced. Counterbalance supports loads between 75 and 225 pounds, allowing immediate adjus

Maria's Playsystem (Model 3P7-203)

Maria's PlaySystem, model 3P7-203, is playground equipment designed for use by children with mobility disabilities. The system includes an 18-inch ADA transfer station. Play features include a right turn slide, a triple rail slide, a crawl tunnel with peek-a-boo holes, a steering wheel wall, and a dinosaur wall. The play station has a double deck with a roof, and is made from recycled plastic lumber with steel posts. DIMENSIONS (LxW): 17 x 18 feet. The space required is 29 x 29 feet. WEIGHT: 158

Marsh Handicap Furniture

Marsh Handicap Furniture includes kitchen and bathroom cabinets, desks, and bookcases designed to be accessible to wheelchair users. Toe kicks beneath cabinet floors are higher and deeper to allow for passage for wheelchair users. Hinges open 180 degrees for barrier free access. Cabinet heights are customizable. Furniture is available in many styles and finishes. DIMENSIONS (HxD): Toe kicks are 8.5 x 6 inches.

Massaging Pillow (Models 3128 & 3128A)

The Massaging Pillow, models 3128 and 3128A, is a vibrating pillow designed for use by individuals with upper extremity or severe physical disabilities.This pillow was designed to be used to help promote proper posture and provide back and neck support for activities such as activating a capability switch. It has low and high vibrating modes, and it can be used while in a wheelchair, office or automobile. POWER: Requires 2 D batteries. DIMENSIONS (DxLxW): 5 x 13 x 13 inches (model 3128) or 4 x 1

Master Stop Anti-Slip Safety Tile

The Master Stop Anti-Slip Safety Tile is a non-slip floor covering designed to prevent falls by individuals with balance, mobility, or walking disabilities. The interlocking square tiles are conformable to almost any required layout and are available with or without grit applications. Each tile has tabs and slots for installation. DIMENSIONS (LxW): 12 x 12 inches. COLOR: Available in several colors.

Master Stop Glow Stripe Step Tread

Master Stop Glow Stripe Step Tread is a non slip step tread designed for use by individuals with low vision or walking disabilies. Installed on the edge of each step, this glow-in-the-dark anti-slip tape provides navigation guidance during power outages and other low-light situations. Its abrasive mineral surface helps prevent slipping regardless of the light conditions. The glow-in-the-dark stripe is rechargeable from any light source. DIMENSIONS (LxW): 6 x 24 or 5.5 x 5.5 inches. Custom sizes

Master Stop Reflective Stripe Tread

Master Stop Reflective Stripe Treads are non-slip stair treads designed for use by individuals with low vision or physical disabilities. Installed on steps, these treads add visual and physical safety to dimly-lit areas. Their anti-slip mineral abrasive coating adds stability to footing and the built-in reflective stripe defines the edge of each step. The tread is available in pre-die-cut strips or squares. DIMENSIONS (LxW): 6 x 24 or 5.5 x 5.6 inches. Custom sizes are available. COLOR: Reflecti

Matot Commercial Grade Residential Dumbwaiter

The Matot Commercial Grade Residential Dumbwaiter is a dumbwaiter designed for use by individuals with mobility or physical disabilities for moving material from floor to floor in multi-level environments. Items that can be handled by this unit include groceries, dishes and cutlery, laundry, firewood, clothing, or luggage. The loading height is counter level, with single side, opposite sides, or adjacent side loading configurations available. The lifting distance is up to 50 feet, with a speed o

Mattress Pad With Wings

The Mattress Pad With Wings is an incontinence pad designed to protect beds and other surfaces for individuals with incontinence. This pad is designed with large fabric wings that tuck under one or both sides of the mattress to help secure the pad in place. The pad is made with three layers; the top layer is made of a quilted cotton and polyester blend that is quilted to an 8-ounce polyester soaker layer that holds moisture. The third, and bottom layer, is the moisture proof layer; it is made fr

Mattress Straps

CUSTOM ADAPTATION PURPOSE: To prevent a plastic-covered mattress from sliding off a home hospital-style bed. The hospital bed has a plastic-covered mattress on top of the main mattress. The plastic cover caused the mattress to slide off the bed while the user was in bed. Long belts were made out of seat belt webbing and buckles were attached to each end. The belts were then bolted to the underside of the bed. When buckled over the mattress, the belts hold the mattress in place and prevent it fr

Maxi Rest Bariatic Bed (Models 4748B, 4748D, 4748Dx, 4748Sb, 4748Sd & 4748Sdx)

The Maxi Rest Bariatric Bed, models 4748B, 4748D, 4748DX, 4748SB, 4748SD and 4748SDX, is a motorized bed designed for use by individuals with obesity and severe physical disabilities or spinal cord injury. This bed features standard powered height adjustment, fowler backrest and leg lift and optional powered Trendelenburg and reverse Trendelenburg. It has a battery backup and a standard remote control. A one-piece frame (models 4748B, 4748D and 4748DX) or two-piece frame (models 4748SB, 4748SD

Maxi-Lift Bariatric Trapeze (Model 5160)

The Maxi-Lift Bariatric Trapeze, model 5160, is a trapeze designed for use in in-bed positioning with individuals with obesity, mobility or lower extremity disabilities, or spinal cord injury. The freestanding unit consists of triangular trapeze suspended a boom extending from a vertical triangular frame mounted on a low-profile base that fits under a bed frame so that the trapeze hangs over the bed. DIMENSIONS (LxW): 61 x 26 inches (base). Overall height is 68 inches. The boom extends 35 inche

Maxi-Lift Bariatric Trapeze (Model 5165)

The Maxi-Lift Bariatric Trapeze, model 5165, is a trapeze designed for use in in-bed positioning with individuals with obesity, mobility or lower extremity disabilities, or spinal cord injury. The freestanding unit consists of triangular trapeze suspended a boom extending from a vertical triangular frame mounted on a low-profile base that fits under a bed frame so that the trapeze hangs over the bed. DIMENSIONS (LxW): 61 x 26 inches (base). Overall height is 68 inches. The boom extends 35 inche

Maxi-Lift Bariatric Trapeze (Model 5171)

The Maxi-Lift Bariatric Trapeze, model 5171, is a trapeze designed for use in in-bed positioning with individuals with obesity, mobility or lower extremity disabilities, or spinal cord injury. The freestanding unit consists of triangular trapeze suspended a boom extending from a vertical triangular frame mounted on a low-profile base that fits under a bed frame so that the trapeze hangs over the bed. This model of the Maxi-Lift Bariatric Trapeze is specially designed for use with the Gendron Max

Maxwell Extended Height Ada Compliant Gravity Fed Toilet (Model 21-418)

The Maxwell Extended Height ADA Compliant Gravity Fed Toilet, model 21-418, is a tall toilet designed for use by individuals with mobility disabilities. This high, elongated toilet has a Maxwell flushing platform, water consumption of 1.6 gallons per flush, siphon-jet flush action, and a glazed trapway. The seat is not included. DIMENSIONS (HxDxW): 31.5 x 29 x 18.5 inches. The rim height is 17 inches and the rough in (the distance between the center of the waste drain and the wall) is 12 inches.

Maytag Built-In Drawer Dishwasher (Model Mdd8000Aws)

The Maytag Built-In Drawer Dishwasher - Stainless Steel, model MDD8000AWS, is an undercounter dishwasher designed for use by individuals with arthritis or lower extremity disabilities. This dishwasher allows the user to load and unload without bending. It has two drawers, one above the other, and can wash in one chamber. It has a polymer tub interior, five-piece place-setting capacity, Duraguard nylon racks, a towel bar door handle, indicator lights, a contoured front, microprocessor controls, a

Medcottage

The MEDCottage is a prefabricated house designed for use by senior or individuals with physical disabilities. This portable house is a freestanding unit designed to be placed adjacent to a caregiver's or family member’s house. It provides 288 square feet of living space, and it allows the occupant to be monitored by the family or caregiver in the main house. The MEDCottage gives the user privacy and independence. It features sleeping, bathing, cooking and living areas. Water, electricity, and wa

Medic-Air Snooze Pillo

The Medic-Air Snooze Pillo is an inflatable cervical pillow designed for use by individuals with neck pain, injury or disability. Made of durable nylon coated vinyl with open-valve air system, this pillow provides support for the head and cervical spine while sleeping, sitting or relaxing. The cushion inflates to a desired comfort level and deflates for portability. DIMENSIONS (HxLxW): 14 x 9 x 5 inches when inflated. COLOR: Blue or burgundy.

Medical Sheepskin (Model 101)

The Medical Sheepskin, model 101, is a decubitus pad designed for use by individuals at risk for pressure sores or ulcers. This tanned natural sheepskin is machine washable and dryable. It can be used in hospital and nursing home beds, wheelchairs, and in homes on chairs and beds. DIMENSIONS (LxW): 3 x 2.5 feet average size. COLOR: Natural.

Meditek Straight Stairlift

The MediTek Straight Stairlift is a straight rail interior seat lift designed for use by individuals with balance, lower extremity, mobility and balance disabilities. The stairlift uses a steel rack and pinion drive system with a worm and wheel self-locking gearbox. It features fabricated steel chassis plate construction with extruded aluminum rail sections. The lift moves up or down at a speed of 16 feet per minute over stair angles ranging from 25 to 50 degrees, and it has an over-speed govern

Melrose Single Handle Kitchen Faucet With Pull-Out Spout (Model D456513)

The Melrose Single Handle Pull-Out Kitchen Faucet, model D456513, is a single lever faucet designed for use by individuals with upper extremity, fine motor, or grasping disabilities. The unit features a single lever handle with a two-function pull-out spout (spray and aerated stream), and comes with a matching brass soap/lotion dispenser. DIMENSIONS: The unit fits 1 3/8 to 1.5 inch diameter mounting hole. WARRANTY: Limited lifetime warranty for manufacturing defects.

Melrose Wristblade Handle Laundry Faucet (Model D100353)

The Melrose Wristblade Handle Laundry Faucet, model D100353, is a faucet with lever-style handles designed for use by individuals with upper extremity, fine motor, or grasping disabilities. The faucet includes a low-rise tubular spout with aerator, left and right blade handles, a hose end adapter, and a ceramic disc valve. DIMENSIONS: Unit width from the end of the left handle to the end of the right handle is 10 5/8 inches. The spout is 8.5 inches long. WARRANTY: Limited lifetime warranty for m

Memory Foam Travel Neck Pillow (Model Vm-161)

The Memory Foam Travel Neck Pillow, model VM-161, is a cervical pillow designed for use by individuals with neck and shoulder pain or arthritis. This U-shaped travel pillow is designed to support the head and neck as the body weight and temperature conforms the foam to the shape of the user’s body.

Men Restroom Ada Sign & Women Restoom Ada Sign

Men Restroom ADA and Women Restroom ADA Signs are braille signs designed for use by individuals who are blind or have low vision. These signs have a pictogram of a man or a woman with the word "Men" or "Women" in sans serif lettering and braille. The signs are made of high impact styrene with a non-glare surface and can be used outdoors or indoors. Double-faced adhesive tape is included on the back for mounting. DIMENSIONS (HxW): 9 x 6 inches. These signs are 1/8 inch thick with 0.5-inch radius

Merry Seat Yourself

The Merry Seat Yourself is a wall mounted folding seat designed for individuals, especially seniors, with balance, mobility, or lower extremity disabilities. This unit is designed to be mounted on a wall of a long hallway in a nursing home so that residents are able to sit down and rest when they get tired during walks down the hall. The folding seat is made of high density polyethylene, and the frame is made of heavy duty tubular steel. The unit can be mounted in the hallway under a hand rail

Metal Bed Support Rail / Handle (Model 122)

The Metal Bed Support Rail/Handle, model 122, is a grab bar for bed designed for use by individuals with mobility or balance disabilities. This tubular aid has a fixed nylon coated supporting bar and an adjustable plastic coated supporting bar. The base fits between the bed base and the mattress. DIMENSIONS: The height of the unit adjusts from 490 to 645 millimeters (mm), the width of the base at the widest point is 590 mm, and the width of the support rail is 310 mm. The overall length is 700 m

Metal Braille Signs

Metal Braille Signs are tactile facility signs. Messages are written in capitalized letters and in grade 2 Braille. English letters are raised 5/8- inch. Messages include: Rest Room, Men, Women, Stairway, and Exit. All signs come with a matching frame. DIMENSIONS: 8.25 x 2.5 inches. COLOR: White lettering on brown or black background.

Metering Faucet (Model 90 - 75)

Metering faucet, push button requires 3 pounds of pressure for operation. Self closing, remains open at least 10 seconds. For bathroom lavatory.

Miconic 10 Elevator System

The Miconic 10 Elevator System is an elevator call button system designed to make building elevators responsive to the needs of persons with disabilities whilerouting traffic efficiently. The traffic management and scheduling system utilizes hall keypads similar to those found on touch-tone telephones on which elevator passengers enter their destination. The system then analyzes status information showing the position of cars and the number, location and destination of passengers and allocates t

Millennium Canopy Crib

The Millennium Canopy Crib is a circular bed designed for use with infants with cognitive or severe physical disabilities. Designed to promote infant safety and provide an unrestricted view for the developing child, this wood crib offers easier child access to parents and eliminates the dangers of sharp corners found on standard cribs. The crib has drop-side access and comes with dome and canopy kits. OPTIONS: Round mattress, bedding and linens, watterproof pad, and mattress pad. DIMENSIONS: The

Mini Strobe Wake Alarm System

The Mini Strobe Wake Alarm System is a digital alarm clock with a strobe light designed to awaken individuals who are deaf or hard of hearing. The strobe light plugs into the easy-set clock and works in conjunction with the audible alarm. OPTION: The strobe is also sold separately ($44.95).

Mini-Mullion Proximity Reader (Model Sxf1050)

The Mini-Mullion Proximity Reader, model SXF1050, is a keyless door lock and security system. The system uses a credit card size command card, and does not require any contact between card and card reading sensor. The card does not have to be removed from wallet or purse to be read. The sensor is mounted on a mullion or narrow stile and has a reading range of up to 3 inches. The system has a tri-state LED visual indicator (red, green, amber) and provides audio feedback representing status and ac

Minnesota Ramp Project

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: The Minnesota Ramp Project is designed to provide consumers with disabilities with the tools necessary to maintain their independence by having a wooden modular ramp or long tread, low rise stairs constructed for their homes using volunteer labor under the supervision of a professional. The project has produced a complete manual entitled "How to Build Ramps for Home Access" which discusses the various requirements and considerations for constructing mo

Miracle Casters

Miracle Casters are casters for office chairs designed for use by individuals with lower extremity or mobility disabilities or arthritis. These casters designed to replace standard casters that have a 7/16-inch diameter stem and are approximately twice as large as standard casters. DIMENSIONS: 4 inches in diameter. COLOR: Black. WARRANTY: 10 years.

Mirror Panel (Model 842-0891)

Contoured stainless steel mirrors on a U-hsaped stand to be mounted in a playground area. Weatherproof. Wheelchair accessible.

Mjm Transfer Chair (Model 509-Mri)

MJM Transfer Chair, model 509-MRI, is a three-position geriatric chair designed for use by individuals with mobility, balance, or neurological disabilities. This chair has a non-magnetic stainless steel frame, an anti-bacterial seat and back cushion, and a sliding footrest. DIMENSIONS: The external width is 28 inches and the internal width is 24 inches. The casters are 5 x 1.25 inches.

Mjm Transfer Chair (Model 530-S/bariatric)

MJM Transfer Chair, model 530-S/Bariatric, is a three-position bariatric geriatric chair designed for individuals with mobility, balance, or neurological disabilities. This model has a PVC plastic frame, four threaded-stem casters, and a padded seat, back, head bolster, and leg cushion. OPTIONS: Dual drop arms. DIMENSIONS: The external with is 34 inches and the internal width is 30 inches. The casters are 5 inches in diameter. CAPACITY: 700 pounds.

Mobi-Mat

Mobi-Mat is a beach and surface mat designed to make beaches and other outdoor areas accessible to people who use wheelchairs. This lightweight, tri-dimensional polyester matting can be manually installed and removed with little ground preparation and fixed to the ground with stakes or other anchoring devices. The Mobi-Mat has a non-slip surface and is permeable, enabling grass to grow through it. It is delivered in rolls for ease in carrying and positioning. It is environmentally-friendly and c

Mobile Base For Sleep System

CUSTOM ADAPTATION PURPOSE: To provide mobility for a Dreama Sleep System used by a child with leukodystrophy and severe scoliosis. For comfort and to slow the development of the scoliosis, the child spends most of his time lying on his side. However, doing so in the bed meant he was isolated from household activities. To make the bed mobile, a frame was constructed of square tubular steel with a plywood base attached to the underside. Attaching the base to the underside of the frame enabled th

Mobile Open Toe Overbed Table (Model 251C)

The Mobile Open Toe Overbed Table, model 251C, is an overbed table designed for individuals who spend long periods of time in bed or who use wheelchairs. Constructed of durable plastic- coated one-inch tubing, this height- and tilt- adjustable table has a U-shaped base with casters and a laminated teak wood top with raised edges on each side. Two durable plastic hand wheels enable the user or caregiver to raise or tilt the table allowing the top to be set at varying heights and angles. DIMENSION

Mobile Power Toilet Aid

The Mobile Power Toilet Aid is an elevated toilet seat and lift combination and caster commode designed for use by individuals with lower extremity and mobility disabilities. The device can be installed and removed from most standard and institutional toilets. It consists of a steel frame with locking casters, arm rests, a padded backrest, and an electric lift that raises the toilet seat (not included) up to 13 inches above the toilet. A single button controls up and down movement and the unit

Mobilift Cx Portable Wheelchair Lift

The Mobilift CX is an interior or exterior wheelchair lift designed for use by individuals with mobility disabilities. This manual lift can be moved from place to place as needed on the built-in wheels. In areas of limited space, the user can be loaded on to the lift before it is wheeled into positon. Designed for single operator set-up and use, this lift features silent manual operation, pictogram decals with operating instructions, locking cable, auto fail-safe crank with load-activated drum b

Mobility Clutch And Pouch

The Mobility Clutch and Pouch is a carrying bag that can be attached to canes, crutches or walkers, a wheelchair side pouch, or a bed pouch. This pouch carries items such as keys, money, and medications and attaches with Velcro to mobility aids and bed rails. This clutch has a removable carrying strap and an outside pocket for glasses or a cell phone. COLOR: Black, red, or pink.

Mobility Handicapped Tub

The Mobility Handicapped Tub is an accessible bathtub designed for use by wheelchair users. This walk-in tub has an extra-wide outward-opening door to allow wheelchair access, and a high seat to facilitate tranfers. Other features include a lever-style door handles; two aluminum grab bars mounted on the bathtub interior; and adjustable stainless steel leveling legs. The tub is available with right- or left-mounted doors. OPTIONS: Variable speed 12-jet hydrotherapy spa with hot temperature mainta

Mobility Stool

CUSTOM ADAPTATION PURPOSE: To provide mobility for a parent or therapist while assisting a child with balance and walking skills. Designed to keep the parent or therapist at the right height near floor level for assisting a young child, the stool has a square plywood base equipped with furniture casters, wooden doweling legs to attach the seat to the base, and a plywood seat. TITLE: Keeping Active. JOURNAL: TAD Journal. REF: Volume 27, Number 3, October 2007: p. 12-13. PAGES: 3. (including cov

Modified Bunk Bed

CUSTOM ADAPTATION PURPOSE: To enable a teenage girl with osteogenesis imperfecta (brittle bones) to safely use a bunk bed. In order to create needed space in a shared bedroom, two single beds were joined as bunk beds. However, there was concern that the limited head room on the bottom bunk would result in the child with osteogenesis imperfecta accidently injuring herself. Similarly, the upper bunk posed risks due to falls or other injury while climbing up. Also, the top bunk would limit access

Modified Chair Lever

CUSTOM ADAPTATION PURPOSE: To provide a customized adaptation to operate the level mechanism of a reclining chair for an individual with right arm weakness. The original lever was quite short and positioned low down on the right side making it very difficult to push down to raise and lower the leg support section of the chair. A handle was created that bent out far enough from the base so it cleared the chair armrest and with a modified handgrip for easier grasping. A bent section of square ste

Modified Crib

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted crib for a mother with C6-7 quadriplegia who uses a motorized wheelchair and. The mother has wrist function but no use of her fingers. She did not have the reach or strength to operate the crib’s drop side, and could not get near enough to the crib once the side was down because it got in the way of her chair. Previous adaptations by TAD staff would not work in this case since the mother used a motorized wheelchair. A TAD v

Modified Desk Chair

CUSTOM ADAPTATION PURPOSE: To enable an individual with short stature to sit comfortably at her desk. A commercially-available swiveling desk chair was purchased and virtually rebuilt. The seat was removed from its existing base and mounted on a custom-built parallelogram-shaped base which was attached to a screwjack to raise and lower the chair height while keeping the seat horizontal. The screwjack was powered by a 50-watt direct-current (DC) motor. This enabled the user to sit on the chair a

Modified Dining Chair

CUSTOM ADAPTATION PURPOSE: To enable an individual who uses a walker and has upper extremity weakness to transfer safely to a dining chair for meals. The individual required a chair that enabled her to sit and then swivel into position and lock the seat in position for eating. A standard office chair with a five-legged star base was purchased. To ensure the chair would be safe and stable during transfers, the existing casters were removed and replaced with rubber feet. Because the left armrest

Modified Dining Chair

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted dining chair for a young woman with Dravet syndrome, an intellectual disability and epilepsy. Her seizures are severe and hard to control. When the young woman was younger she use to sit at the kitchen table using a high chair but as she got older, she outgrew the high chair and now needed a new way to sit comfortably at the dinner table. Upon initial evaluation, the assessment team tried a TAD Michelle Tilt-in-Space Supp

Modified Stair Climber

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted modification to a stair climber for an individual who uses a wheelchair. The individual attends a mediation class that requires him to get up a flight of 20 steps. Previously he used a commercially available stair climber that clamped onto his wheelchair and lifted him up the stairs. This adaptation was working well until the user got a new wheelchair which was not compatible with the stair climber. The new wheelchair has a

Modified Stool

CUSTOM ADAPTATION PURPOSE: To enable an individual with muscle weakness and balance disabilities to work safely in the kitchen. A stable shower stool with a large, molded plastic seat was modified for use in the kitchen. To increase the height, the lower sections of the legs, which have height-adjustment holes and rubber feet, were removed, as were the spring clips in the upper legs. The legs were then extended with a stub insert tube. New holes were drilled in the extensions for the spring cli

Modifying A Clothes Closet.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Modifying a closet to make it accessible for someone in a wheelchair. Move the closet rod to about 3 1/2 feet above the floor, and install a shelf at 48 inches and no more than 16 inches deep. Includes drawing. SKILLS REQUIRED: Simply woodworking. TITLE: Home Improvement and Repair: Home Security REF: Book: Time Life Books, Alexandria, VA, p 130-131. PAGES (including cover):1 1979.

Modular Tile

The Modular Tile is non-slip floor covering designed for use by individuals with balance disabilities. This slip-resistant cushioned tile has a modular design that provides protection against slips and falls caused by wet floors by raising foot traffic above the slippery surface at any length, width or shape. It is constructed of non-porous recycled PVC plastic. Because of its tensile strength, this tile is not affected by heat, cold, or sunlight. OPTIONS: Available is open grid or solid hatch

Modular Xp Ramp System

The Modular XP Ramp System is a modular ramp designed for use to make buildings wheelchair accessible. This ramp system is available with modular ramp sections in four lengths turns and switchback. It can be moved or reconfigured, with little or no site preparation, and can accommodate a rise up to 60 inches. Made entirely of aluminum, each section is welded together to be durable and weather resistant. It has slip resistant grooved aluminum floors with protective curbs and powder-coated double

Moen Designer Elegance Securemount Grab Bar

Moen Designer Elegance SecureMount Grab Bars are wall grab bars designed for use by individuals with balance, lower extremity, neurological, or mobility disabilities or arthritis. The patented SecureMount system allows these grab bars to be installed in wall studs at any angle, and using the optional SecureMount Anchors allows the bars to be installed anywhere on the wall without using the studs. These stainless steel bars have concealed screws and grip pads for added security. OPTIONS: Pair of

Moen Grab Bar Shower Holder

The Moen Grab Bar Shower Holder is a holder for handshower designed for use by individuals with lower extremity, balance, mobility, upper extremity, or severe physical disabilities or severe spinal cord injury. This unit attaches to most vertical, horizontal, or diagonal grab bars without tools and accommodates most handshowers. DIMENSIONS: Fits grab bars 1.25 to 1.5 inches in diameter. WARRANTY: Limited lifetime warranty.

Moen Handshower With Slide Bar (Models 3867 & 3887)

The Moen Handshower with Slide Bar, models 3867 and 3887, is a handshower on a height adjustable bar. The handshower includes a flexible hose, an adjustable slide bar, and a vacuum breaker. Model 3887 has a one-function full spray. Model 3867 has a four-function full spray with massaging rinse. DIMENSIONS: Slide bar is 30 inches long. Hose is 69 inches long. COLOR: Chrome, brushed bronze, brushed nickel, polished brass, oil rubbed bronze, platinum, or satine finish. WARRANTY: Limited lifetime wa

Moen L-Shape Peened Grab Bar (Models 8992, 8994, & 8996)

The Moen L-Shape Peened Grab Bar, models 8992, 8994 and 8996, is a grab bar designed for use by individuals with balance or mobility disabilities. The finish is peened to improve grip. The rods are formed from 18-gauge, type 304 stainless steel tubing with a satin finish. It has a concealed screw mounting. DIMENSIONS (LxD): 16 x 32 inches (8992); 24 x 36 inches (8994); or 24 x 48 inches (8996). Diameter is 1.5 inches. CAPACITY: 500 pounds. WARRANTY: Limited lifetime warranty.

Moen Pause Control Handheld Shower

The Moen Pause Control Handheld Shower is a handshower with flexible hose designed for use by individuals with mobility, balance, neurological, or severe physical disabilities or spinal cord injury. This handshower offers four settings: shower, pulsating, massage, and pause. The pause feature enables the user to pause the water flow with the touch of a button. The unit also has an easy-to-turn, over-sized spray control. This lightweight unit has a soft-grip handle with safety strap for a secure

Moen Securelock Tub Grip (Model Dn7175)

The Moen SecureLock Tub Grip, model DN7175, is a grab bar for bathtub designed for use by individuals with balance, lower extremity, or mobility disabilities. This portable unit fits over most tubs and locks with the Securelock mechanism. The tub walls are protected by non-skid pads. The circular handle/grab area is textured for a secure grip. DIMENSIONS: The unit fits tub walls 2.75 to 5.5 inches thick. The grip height is 12 inches. CAPACITY: 350 pounds. WEIGHT: 6 pounds. WARRANTY: Limited life

Moen Suction Balance Assist Bar

The Moen Suction Balance Assist Bar is a wall grab bar designed for use by individuals with balance disabilities. This portable bar has a non-slip grip and attaches to smooth, flat surfaces with the large suction cup at each end. Locking mechanisms secure the bar to the wall once placed with the suction cups. Releasing the locks releases the bar from the wall. DIMENSIONS: 12 inches long. COLOR: Cool white.

Molnlycke Mepitac Soft Silicone Tape, Model-298300

Molnlycke Mepitac Soft Silicone Tape minimizes pain and trauma at dressing changes. It is ideal fixation for patients with fragile and sensitive skin. The unique Safetac adhesive makes sure that Mepitac can be changed without damaging the skin. Knitted fabric is comfortable and easy to cut. It also conforms well to body contours.

Monitor.

Valve for showerhead or tub spout. Volume and temperature setting operate independently. High temperature limit stop standard on all units. Pressure balance operation.

Motion Activated Door Key Light

The Motion Activated Door Key Light is a door lock light designed for use by individuals who have low vision. The unit has four bright LED bulbs that activate by motion to illuminate the keyhole, making is easier to find in the dark. Features include automatic shut off after six to eight minutes. The device mounts on the door with double-sided tape or screws (included). POWER: Uses 1 AA battery. DIMENSIONS (WxH): 3.125 x 1.5 inches.

Motorhome Lift (Model 124)

The Motorhome Lift, model 124, is a mobile homelift designed for use by individuals with mobility disabilities or spinal cord injury. This steel lift is designed without a platform and operated by suspending the wheelchair and the user from a vertically pivoting arm. The arm pivots down to attach to the occupied wheelchair, then lifts the occupant and chair into the motorhome. Permanently attached nylon webbing attach chair to the arm of the lift (permanent, detachable or temporary visitor hooku

Motorized Doorglass Blinds (Models 684-Mrbl & 686-Mrbl)

Motorized Doorglass Blinds are windows with motorized blinds designed for use by individuals with limited strength or grasp. Blinds are built into a window frame that can be installed in a door or a wall, and are controlled by a touch pad in the side of the window frame. Blinds have metal slats that can be raised, lowered, or tilted to admit partial light with a single control, and can be adjusted from the top down or from the bottom up. The window has two panels of tempered safety glass that ar

Mounting Ramp Plans

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Plans to enable persons with basic carpentry skills to build a ramp to enable individuals with mobility disabilities to mount a horse. The plans include a materials list and step-by-step instructions for building a stationary mounting ramp.

Mr. Longarm Lightbulb Changing System

The Mr. Longarm Lightbulb Changing System is a light bulb changing aid that can be used by an individual seated in a wheelchair or by others who have difficulty reaching light bulbs. The system contains one extension pole and three light bulb changing attachments. The three-section, non-conductive, variable-length pole allows a user to reach light bulbs on the ceiling with the pole extended. Interchangeable cups fit the three most popular bulb sizes: floodlight, spotlight, and incandescent light

Mullen Shower Base Bathtub Replacement

Mullen Shower bases are roll-in showers designed for use by individuals who use wheelchairs or who have walking or lower extremity disabilities. These bases can be installed with vinyl or tile floors and feature a clamping system on two access sides that secures the base to the vinyl floor covering or the tile floor adapter to prevent leakage. Built-in tile upstands on the other two sides contribute to the integrity of the water seals. The ribbed underside enables the unit to key into the floori

Multi-Fold Portable Ramp (Models Amf 5, Amf 6, Amf 7, Amf 8, Amf 10, & Amf 12)

The Multifold Portable Ramp is a portable wheelchair ramp designed for use by individuals with mobility disabilities or spinal cord injury. This ramp can be carried like a suitcase. Made from welded aluminum, it has a full platform with an anti-slip high traction surface. For transport, the ramp separates into two pieces that fold in half, and the panels are locked together with a closure strap. DIMENSIONS (HxLxW): 10 x 60 x 30 inches in use, 9 x 32.25 x 16 inches folded (model AMF 5); 12 x 72 x

Multi-Level Hand Grip (Model F72481)

The Multi-Level Hand Grip, model F72481, is a wall grab bar designed to provide support for persons in bathing situations or for getting up or sitting down on the toilet. The grip can be mounted at any level and forms a curved L which protrudes from the wall. The unit is made of molded unbreakable polypropylene with grooved inner surfaces for a non-slip grasp. Three models of the grip are available: a single level (H72481-0001) which attaches to the wall at both ends; a double level (model H7248

Multifold Ramp (Models Wcr530, Wcr630, Wcr730, Wcr830, Wcr1030, & Wcr1230)

The Multifold Ramp is a portable ramp designed to provide wheelchair or scooter access over steps and curbs or into full-sized vans and minivans. This aluminum ramp is hinged to fold in several places for transport. Ramps feature auto-locking and a suitcase-style carrying handle. The ramp is surfaced with anti-slip, high-traction safety tape. DIMENSIONS: Unfolded ramps are 30 inches wide and 5 feet (WCR530), 6 feet (WCR630), 7 feet (WCR730), 8 feet (WCR830), 10 feet (WCR1030), or 12 feet (WCR123

Multilift Vertical Platform Lift

The Multilift Vertical Platform Lift is an interior or exterior wheelchair lift designed for use by individuals with mobility disabilities or spinal cord injury. This ruggedly constructed lift is suitable for indoor or outdoor use and has an ACME screw drive system, a plastic safety underpin feature, an anti-skid surface on its floor and ramp, a manual hand crank to raise or lower the platform, and an electronic free relay device. COLOR: Floor and ramp surface are black.

Mutli Position Sleeping Pillow

The Multi Position Sleeping Pillow is a pillow and lumbar mat designed to support the cervical and lumbar spine. Useful for side, back and stomach sleepers. Supports the cervical and lumbar spine, and cushion knees and hips. Side Sleepers: Place the pillow between knees and the lumbar mat under lower back for spinal alignment. Back Sleepers: Place the pillow under neck and the lumbar mat under lower back to compensate for sagging mattresses. Stomach Sleepers: Place the pillow under one shoulder

My Place Laptop Table

The My Place Laptop Table is a notebook or laptop computer support and bookholder designed for use by individuals with mobility or upper extremity disabilities. This lightweight work station can be used while seated in a chair or reclining in bed for writing, using a laptop, reading, doing crafts and more. It has fold-out legs, which adjust to set the tabletop at the optimal height. The tabletop has two panels, the angle of which is independently adjustable. The left panel is designed to hold th

National Ramp Modular Ramp System

The National Ramp Modular Ramp System is a modular ramp designed for use by individuals with mobility disabilities or spinal cord injury. The ramp modules can be installed in permanent, semi-permanent, or temporary situations and is intended for commercial or residential use. Units are made of high-strength, non-flammable aluminum, and require no painting or sealant. The grooved aluminum surface is slip resistant with open mesh to let rain and snow through. Handrails are included on all modules.

National Ramp Pathway Ramp

The National Ramp Pathway Ramp is a portable ramp designed for use by individuals with mobility or walking disabilities. This ramp provides temporary or semi-permanent home access for use with scooters, wheelchairs and walkers. Made of welded aircraft-grade aluminum, it is strong but lightweight and portable. It has a skid-resistant surface and a self-adjusting bottom transition plate for conversion from ramp to ground.

National Ramp Pathway Ramp With Rail

The National Ramp Pathway Ramp with Rails is a portable ramp designed for use by individuals with balance, mobility, or walking disabilities. Made of aluminum with an extruded non-skid surface, it can be used outdoors in all weather conditions, and can be moved or relocated. Numerous widths, lengths, and handrail options are available.

National Ramp Threshold Ramp (Aluminum)

The National Ramp Aluminum Threshold Ramp is a portable, modular ramp designed for use to make thresholds acccessible to wheelchair, walker, and cane users. This lightweight, durable, free-standing ramp can be placed indoors or outdoors in front of doorways, sliding glass doors, and raised landings. Made of anodized aluminum, the ramp is seam-free. The modular design with its interchangeable components accommodates thresholds from 0.75 to 6 inches high. DIMENSIONS: 34 inches wide.

National Ramp Threshold Ramp (Rubber Wedge)

The National Ramp Rubber Wedge Threshold Ramp is a portable ramp designed for use to make thresholds accessible to wheelchair users. The wedge is placed against the door threshold, either inside or outside, to provide a smooth ground-to-sill transition. Made of recycled tires, the ramp is slip resistant and portable. The ramp can be trimmed for lower heights and widths or combined to reach greater heights. For wider entrances, two ramps can be placed side by side. DIMENSIONS: 48 inches wide.

National Ramp Threshold Ramp (Rubber)

The National Ramp Rubber Threshold Ramp is a ramp designed for use to make thresholds accessible to wheelchair users. Placed in front of a door, it provides a smooth ground-to-sill transition. Made of 100 percent recycled materials, this portable indoor/outdoor ramp is slip-resistant and can be used on any surface. It can be trimmed or notched for a custom fit, and can be moved to any location. It does not interfere with door tracts, so it can be used with sliding glass doors. DIMENSIONS: 36 in

Neptune Toilet Lift

The Neptune Toilet Lift, also called Solo Toilet Lift, is a powered elevating toilet seat lift designed for use by individuals with lower extremity or mobility disabilities or arthritis. This switch-operated unit gently lowers and raises the user on and off the toilet in a way that mimics the natural body motion. It comes with arms which can be raised to facilitate side transfer. The controls are built into either the left or right arm. The feet have locking cups that with antislip pads. POWER:

Neuropedic Sleep Set

The Neuropedic Sleep Set is an orthopedic mattress set complete with mattress and foundation designed for use by individuals with lower back pain or at risk for decubitus ulcers. The set features the Neuropedic Multi-Density Mattress (see separate entry). OPTIONS: CC 2000 Series mattress; fluid-proof cover. SIZES: Twin, full, queen, king, and custom sizes.

Neutral Posture Chair - 6000 Series

The Neutral Posture Chair - 6000 Series is an adjustable office chair designed for use to provide back support while working at a desk. This chair has a high back with adjustable back height and angle and an inflatable lumbar pad. This chair features six seat size and contour options with adjustable seat height, depth, angle, and tension. It has adjustable arm height, width and 360-degree armpad rotation. The 6000 Series also has a plastic outer shell and a multi-function mechanism with seat sli

New Dimension Folding Lectern (Model Ada-1)

The New Dimension Folding Lectern, model ADA-1, is an accessible lectern designed for use by wheelchair users. This portable floor lectern allows appropriate line of sight from the presenter to the audience and is ergonomically designed for user comfort and utility. It has continuous steel hinges for folding, and integral components to set up without tools. The lectern is covered with a polypropylene fabric that is spill- and stain- proof and resistant to abusive handling. Other features include

New Life Mattress

The New Life Mattress is a pressure relief foam mattress designed for use by individuals at risk for pressure sores or ulcers. The two-layer foam mattress is covered with waterproof and vapor proof fabric with a firmer inner cavity that provides support to the shoulder and heel area. The mattress also features side handles and supportive edges that aid in transferring in and out of bed. The handles are positioned with reinforced stitching to the underside of the mattress to prevent accidental he

Newel Handrail

The Newel Handrail is a handrail designed for use alongside stairs by individuals with balance or lower extremity disabilities or arthritis. This handrail is designed specifically for indoor use and eliminates the need to release the handgrip at the top ot bottom stair. Available or left- or right-side use, these rails are made of tubular steel, treated with rust inhibitor, and coated with polyester epoxy resin powder coating. DIMENSIONS: 27.75 inches l0ng x 1.25 inches in diameter. CAPACITY: 27

Newel Post Stair Rail (Model 119)

The Newell Post Stair Rail, model 119, is a stair handrail designed for use by individuals with balance or walking disabilities. This plastic-coated steel rail is designed to help prevent users from slipping or falling while turning corners on staircases. The rail has three fixing holes and is available in right- or left-handed versions. DIMENSIONS: Overall length is 750 millimeters (mm).

No Slip Ice Carpet

The No Slip Ice Carpet is an ice mat designed to protect people with mobility disabilities from slipping when walking on ice or snow. The No Slip Ice Carpet is made from natural sisal fibers treated with latex rubber, which adheres firmly to the moisture in ice and snow. The Ice Carpet rolls up for storage and unrolls into a runner-style carpet for use on steps, ramps, or flat surfaces, without shoveling, sanding or spreading chemical melts. DIMENSIONS (L x W): 10 feet x 18 inches or 10 feet x 3

No Smoking Ada Sign

The No Smoking ADA Sign is a braille sign designed for use by individuals who are blind or have low vision. The sign has a no smoking pictogram symbol (a slashed circle superimposed on a burning cigarette) with the words "No Smoking" in sans serif letters and braille. The sign is made of high impact styrene that can be used outdoors or indoors and has a non-glare surface. Double-faced adhesive tape is included on the back for mounting. DIMENSIONS (HxW): 9 x 6 inches. Signs are 1/8 inch thick and

Noah's World Bed

The Noah's World Bed is an enclosed bed designed for use by children with autism or sleep disorders such as sleepwalking. This bed has a wooden box frame for a twin mattress and four 6-foot posts, one at each corner. A fabric ecnclosure is secured to the frame and posts, covering all four sides and the top. The enclosure has one or more zipper openings on that allows the child to be zipped in safely to prevent night wandering. During the day, the bed can also provide a contained play environme

Non-Peel Flanged Grab Rail (Model 117)

The Non-Peel Flanged Grab Rail, model 117, is a grab bar designed for use by individuals with balance or mobility disabilities. This grab bar has flanged ends with mounting holes. DIMENSIONS: Available in 12, 15,18, 24, or 28 inches long with a 2.75-inch hand clearance. The rail is 1-inch in diameter. COLOR: White plastic non-peel coating.

Non-Peel Flat End Grab Rail (Model 115)

The Non-Peel Offset Grab Rail, model 114, is a grab bar designed for use by individuals with balance or mobility disabilities. DIMENSIONS: Available in 18, 24, or 28 inches long with a 2-inch hand clearance. The rail is 1-inch in diameter. COLOR: White plastic non-peel coating.

Non-Peel Offset Grab Rail (Model 114)

The Non-Peel Offset Grab Rail, model 114, is a grab bar designed for use by individuals with balance or mobility disabilities. This steel grab bar is angled at 45 degrees and is designed for applications where hand access is difficult such as door jambs. DIMENSIONS: Available in 18 or 28 inches long with a 2-inch hand clearance. COLOR: White plastic non-peel coating.

Non-Skid Stair Nosing

The Non Skid Stair Nosing is non-skid stair tread covering designed for use to make stairways safer for individuals with balance or walking disabilities. The tread has a nose that wraps over the front of the step to ensure solid footing. The tread is held in place with 9 screws while a strip of long-lasting, non-skid tape keeps the edges of the nosing slip free. The tread is made of plain, anodized, or powder coated aluminum. DIMENSIONS (DxW): 2.75 x 30 inches, with 1.125 inch nose. COLOR: Black

Non-Slip Bath Step with Handle

The Non-Slip Bath Step with Handle is a bath step designed for individuals who have difficulty maintaining their balance. It has a textured, non-slip rubber base to secure stepping, as well as a curved safety handrail to help users keep their balance as they transition in and out of the bathtub. Made of durable steel construction, the Non-Slip Bath Step also adds 4.5 inches of height from the floor, helping to make stepping over the edge of the tub all the more smoother.

Non-Slip Tray (Model Ha-4255)

The Non-Slip Tray, model HA-4255, is designed for use by individuals with balance, neurological, or upper extremity disabilities. This tray holds items without slippage at angles of up to 30 degrees. The tray is made with layers of wood veneer combined with synthetic resin to provide strength, with a non-slip coating which prevents items from sliding. DIMENSIONS: 360 x 280 millimeters. WEIGHT: 230 grams.

Noodle Protection

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: To allow children with neurological impairments such as Myoclonus safely participate in grocery shopping by sitting independently in the shopping cart with the help of foam pool noodles.

Norfolk Stair Rail Support (Model 112)

The Norfolk Stair Rail Support, model 112, is a stair handrail designed for use by individuals with balance or walking disabilities. This unit allows an extra handrail to be fitted on the opposite side to an existing rail, enabling the user to hold both rails for added safety while ascending or descending the stairs. This plastic-coated, peel-resistant tubular rail support fits around banisters and railings and against walls. Features include two stem flanges with three fixing holes and a moveab

Nova Controls

Nova Controls is a lighting control system designed for use by persons with physical disabilities. This linear, slide-to-off dimmer features surge protection, power failure memory, radio frequency interference (RFI) suppression and voltage compression - reduces changes in lighting level when other electrical appliances are switched on/off. It can also accommodate up to 2000 watts of selected lighting applications. OPTIONS: Complete line of matching lighting controls (incandescent, fluorescent, m

Nova T

Nova T is a lighting control system designed to assist persons with physical and mobility disabilities. Available with a wireless remote control system, this low-voltage, slider control offers the user complete control of the light setting, ranging from full brightness to a low dim. It features surge protection, power failure memory, radio frequency interference (RFI) suppression and voltage compensation - reduces changes in lighting level that occur when other electrical appliances are switched

Nvi Electronic Tissue Dispenser

The NVI Electronic Tissue Dispenser is an electronic toilet paper dispenser designed for use by individuals with grasping, fine motor or upper extremity disabilities. This dispenser uses standard toilet paper rolls and automatically dispenses toilet paper at the wave of a hand. The user places his or her hand in front of the unit’s infrared sensor beam, and the unit issues the toilet paper from the roll. When it reaches the desired length, the user tears off the paper towel using one hand. The u

Nvi Electronic Towel Dispenser

The NVI Electronic Towel Dispenser is an electronic paper towel dispenser designed for use by individuals with grasping, fine motor or upper extremity disabilities. This dispenser mounts on a wall and automatically dispenses rolled paper towels at the wave of a hand. The user places his or her hands in front of the unit’s infrared sensor beam, and the unit issues the paper towel from the roll. When it reaches the desired length, the user tears off the paper towel using one or both hands. The uni

Oakham Chair (Model 700)

The Oakham Chair, model 700, is an adjustable chair designed for use by individuals with neck, shoulder, and back pain. This chair is completely height, seat depth, and back height adjustable. Features include a padded seat with built in lumbar support, padded armrests, and winged head support. The chair is mounted on a metal frame and covered in vinyl for easy cleaning. DIMENSIONS: Overall height is 1120 millimeters (mm) to 1250 mm. Width is 625 mm. Overall depth is 670 mm. Seat height is 430 t

Oasis Walk In Bathtub

The Oasis Walk-In Bathtub is an accessible walk in bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. The Oasis is a full-depth, walk-in bathtub that features a side-opening door with a sturdy locking mechanism, an integral molded bath seat, temperature controlled hot water, and an anti-slip base. It is available with either a left- or right-hand door. Premier Bathrooms OPTIONS: Shower canopy allowing the tub to be used as a shower cubical; lever,

Off-Set Door Hinges

Off-Set Door Hinges are designed to widen doorway openings for access by wheelchair users. These hinges add two inches of width to the doorway and use the existing hinge holes and screws. DIMENSIONS (WxL): 2 x 3.5 inches. COLOR: Chrome.

Off-The-Pot

Off-the-Pot is a floor- or wall-mounted grab bar designed to assist with bathroom mobility for individuals with balance, neurological, lower extremity, or mobility disabilities or arthritis or spinal cord injury. The unit can assist with transfers to and from a wheelchair or walker, seated balance, and balance upon standing. This device can be positioned on the right- or left- hand side of the toilet, beside the bathtub, or between the tub and toilet, and mounts to the floor or wall. Features in

Office / Oficina Sign With Braille (Model Rsmb-485)

The Office / Oficina Sign with Braille, model RSMB-485, is a braille and tactile sign designed for use by individuals who are blind or have low vision. The sign is a bilingual (English/Spanish) sign that displays the words "Office" and "Oficina" in raised text with the Grade II braille equivalent of those words printed just below the text. The sign has an acrylic core with a laser-engraved top color layer and a matte finish. Each sign includes permanent acrylic adhesive with removeable backing.

Office Sign With Braille (Model Rsme-485)

The Office Sign with Braille, model RSME-485, is a braille and tactile sign designed for use by individuals who are blind or have low vision. The sign displays the word, "Office," in raised text with the Grade II braille equivalent just below the text. The sign has an acrylic core with a laser-engraved top color layer for tactile feel and a matte finish for better visibility. For mounting, the sign comes either with permanent acrylic adhesive with removeable backing or with a wall bracket. DIMEN

Offset Door Hinges (Model 6523)

The Offset Door Hinges, model 6523, are door hinges designed to allow the door to swing clear for greater wheelchair clearance. This hinge adds 2 inches to the door opening, using existing hinge holes and screws. Hinges are latex-free and come two to a package. DIMENSIONS (LxW): 3.5 x 2 inches. COLORS: Brass.

One-Piece Modular Access Ramp

The One-Piece Modular Access Ramp is a modular ramp designed for use by individuals with mobility disabilities or spinal cord injury. This ramp is pre-fabricated in one-piece and made of steel with slip-resistant, pressure-treated wood decking. The ramp is painted with high-quality industrial enamel. OPTIONS: Powder-coat finish. DIMENSIONS: Standard ramps are available in 6-, 12-, 18-, 24- or 30-foot lengths with a 5 x 5 foot landing at the door. Standard slope is 1:12. CAPACITY: 1,000 pounds.

Ontrac Ramp (Models Xps436, Xps536, Xps636, Xps736, & Xps836)

The OnTrac Ramp, models XPS436, XPS536, XPS636, XPS736 and XPS836, is a ramp designed for use by individuals with mobility disabilities or spinal cord injury. Made of aluminum, it is durable and weather resistant, with a slip resistant grooved aluminum surface, curbing, and powder coated handrails. OPTIONS: ADA extended handrail. DIMENSIONS (LxW): 48 x 36 inches (XPS436); 60 x 36 inches (XPS536); 72 x 36 inches (XPS636); 84 x 36 inches (XPS736); 96 x 36 inches (XPS836). Curbing is 2 inches high.

Open Sesame System Ii

The Open Sesame System II is a residential powered door operator designed for use by people who use wheelchairs. The system includes the Open Sesame Deluxe Door Opener (Model 100), an electric strike plate for mounting in the wooden door frame, the wall transformer and wiring, the transmitter, and mounting hardware for inward and outward opening doors. The system opens and closes left- or right-side hinged doors with the touch of a button on the matchbox-sized transmitter which can be mounted on

Option E Shower Door

The Option E Shower Doors are shower doors designed for people with mobility disabilities or who cannot stand in the shower and require assistance when showering. They are intended to provide easy access to a spouse, nurse or caregivers so that they can reach over the doors to assist the person taking the shower while keeping water within the shower area. The Option E doors are for use with showers located in a corner with two walls and two sides open with a threshold to contain water. DIMENSION

Option Ew Shower Doors

The Option EW Shower Doors are shower doors designed for people with mobility disabilities or who cannot stand in the shower and require assistance when showering. They are intended to provide easy access to a spouse, nurse or caregivers so that they can reach over the doors to assist the person taking the shower while keeping water within the shower area. The Option EW doors are for use with showers located in a corner with two walls and two sides open with no threshold to contain water. The sy

Option N Shower Doors

The Option N Shower Doors are shower doors designed for people with mobility disabilities or who cannot stand in the shower and require assistance when showering. They are intended to provide easy access to a spouse, nurse or caregivers so that they can reach over the doors to assist the person taking the shower while keeping water within the shower area. The Option N doors are for use with showers located in an alcove with walls on three sides and one side open and a threshold to contain water.

Option Nw Shower Doors

The Option NW Shower Doors are shower doors designed for people with mobility disabilities or who cannot stand in the shower and require assistance when showering. They are intended to provide easy access to a spouse, nurse or caregivers so that they can reach over the doors to assist the person taking the shower while keeping water within the shower area. The Option NW door system is for use with showers located in an alcove with walls on three sides and one side open with no threshold to conta

Option T Shower Doors

The Option T Shower Doors are shower doors designed for people with mobility disabilities or who cannot stand in the shower and require assistance when showering. They are intended to provide easy access to a spouse, nurse or caregivers so that they can reach over the doors to assist the person taking the shower while keeping water within the shower area. The Option T doors are for use with showers located in an alcove with walls on three sides and one side open and a threshold to contain water.

Option Tw Shower Doors

The Option TW Shower Doors are shower doors designed for people with mobility disabilities or who cannot stand in the shower and require assistance when showering. They are intended to provide easy access to a spouse, nurse or caregivers so that they can reach over the doors to assist the person taking the shower while keeping water within the shower area. The Option TW door system is for use with showers located in an alcove with walls on three sides and one side open and a threshold to contain

Orderassist

OrderAssist is a call signal and communication aid for the deaf designed for use by restaurant and drive-through restaurant customers who are deaf or hard of hearing or who have speech or communication disabilities. At the drive-through, the customer reviews the menu board and then uses the included BigBell transmitter (see separate entry) to alert the staff with a tone signal that the customer will be pulling forward and ordering in an alternative way. OrderAssist includes customized forms and

Orion Lu/la Elevator

The Orion LU/LA (limited use/limited application) Elevator is a commercial elevator designed for use by individuals with mobility or walking disabilities. This heavy-duty, fully enclosed elevator with automatic sliding doors can be fitted into new or existing low-rise buildings with two to four stories, such as health clinics, schools, or museums. The elevator is operated with a single automatic push button, and serves a maximum of four levels. Safety features include slack rope safeties that lo

Otodor Swing Door Opener (Models Dm-50, Dm-100, And Dm-150)

The Otodor Swing Door Opener is a powered door opener designed for use by individuals with mobility, neurological, or upper extremity disabilities. Designed for non-professional installation (with the exception of the electric strike plate), this opener can be used on residential, office, or public restroom swinging doors weighing up to 100 pounds. Model DM-50 remotely opens and closes most interior swing doors. The kit includes the door opener main unit and remote control. Model DM-100 opens an

Ott-Lite Natural Light Supplement 20 Watt Swirl Bulb (Model Opb20Sw)

The Ott-Lite Natural Light Supplement 20 Watt Swirl Bulb, model OPB20SW, is a low vision light bulb designed for use by persons with low vision. The bulb contains a blend of phosphors formulated to replicate natural daylight. For many persons with low vision, it reduces glare and allows the user to see fine details clearly and easily in colors that are not distorted by glare. This bulb is designed to fit most standard incandescent fixtures, and can replace incandescent bulbs up to 100 watts. It

Ott-Lite Task Light With Handle

The Ott-Lite Task Light with Handle is a low vision light designed for use by persons with low vision. Its 13-watt bulb contains a blend of phosphors formulated to replicate the full spectrum of natural daylight. For many persons with low vision, the bulb produces high color rendering, enhanced contrast, and good visual acuity with less glare. This lamp is recommended for color-matching, sewing, and crafts.

Ott-Lite Truecolor 18 Watt Floor Lamp (Model L18514)

The Ott-Lite True Color 18-Watt Floor Lamp is a height-adjustable low vision lamp lamp designed for use by persons with low vision. This floor lamp uses an 18-watt TrueColor bulb that replicates natural daylight. For many persons with low vision, this bulb produces high color rendering, enhanced contrast, and good visual acuity with less glare. The lamp also has a flexible neck that rotates 180 degrees, and a weighted base for stability. The Ott-Lite True Color 18-watt bulb is comparable in brig

Ott-Lite Tubes (Models Olt2012, Olt4010, & Olt4012)

Ott-Lite Tubes are tubes for low vision lights designed for use by persons with low vision. Ott-Lite Tubes contain a blend of phosphors formulated to replicate natural daylight. For many persons with low vision, they produce high color rendering, enhanced contrast, and good visual acuity with less glare. These tubes are designed to replace standard fluorescent tubes in overhead fixtures. Model OLT2012 replaces standard F20T12 tubes in 24-inch fixtures, and models OLT4010 and OLT4012 replace stan

Ott-Lite Visionsaver Lamps (Models L13331, L13337, L13338, L18330, L18332, L18336, & L18536)

Ott-Lite VisionSaver Lamps are low vision lights designed for use by individuals with visual disabilities. These lamps use full-light-spectrum bulbs that contain a blend of phosphors formulated to replicate natural daylight. For many persons with low vision, VisionSaver bulbs produce high color rendering, enhanced contrast, and good visual acuity with less glare. The Ott-Lite VisionSaver 13-watt bulb is comparable in brightness to a 75-watt incandescent bulb, and the 18-watt bulb is comparable t

Outdoor Projected Signs

Outdoor Projected Signs are double-sided Setonflex (acrylic), double-sided access signs for outdoor facility use to direct people into the building. The material of the sign is weather resistant and will withstand temperatures up to 160 degrees Fahrenheit. Messages are custom selected by the purchaser, and may include a maximum of 10 letters without a symbol, or 8 characters with a symbol. The price of each sign depends on the message chosen: each character is $4.45 (includes engraving on both

Outdoor Wheelchair Accessible Tables

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create customized outdoor wheelchair accessible tables for students with mobility disabilities. The Hunter Orthopedic School has 33 students with physical and/or intellectual disabilities from kindergarten to year 12. The school’s existing plastic tables were dilapidated and were not wheelchair accessible friendly. The school wanted to replace the tables with something different that may be supported in a different way making the tables easier for

Outlook Series Ada Compliant Shower (Models Bfs-36F, Bfs-48F, Bfs-6036F, & Bfs-60F)

The Outlook Series ADA Compliant Shower is a roll-in shower designed for use by individuals who use wheelchairs. This unit comes as a base model with a choice of Americans with Disabilities Act-compliant options. The integrated fiberglass base has an interior and exterior half-beveled edge, front flange, and wheelchair-accessible threshold. OPTIONS: Straight grab bar with textured finish; curtain rod with plastic end caps; chrome fixtures; solid brass drain; large L-shaped or rectangular seat. D

Outlook Series Barrier Free Tub Shower (Model Bfts-60F)

The Outlook Series Barrier Free Tub Shower, model BFTS-60F, is a shower bathtub designed for use by individuals with mobility disabilities. The two-piece tub shower base has a textured bottom with a left- or right-hand drain. The maximum water capacity of the tub is 39.6 gallons. OPTIONS: Homestead whirlpool system with air switch; Naugahyde or Phenolic rectangular fold-up or drop-in seat; straight grab bar; curtain rod with plastic end caps; and vinyl shower curtain with stainless steel hooks.

Outside Corner Grab Bar

Stainless steel outside corner grab bar. 1, 1 1/4 or 1 1/2 inch diameter, 1 1/2 inch wall clearance. Exposed or concealed mount. Satin finish. 34 by 18 1/2 inches.

Outswing Exterior Door Threshold - Dark Bronze - Ada Compliant

The Outswing Exterior Door Threshold - Dark Bronze - ADA Compliant is a threshold ramp designed for use to modify a doorway to make it wheelchair accessible. A continuous dam provides a sill with a positive barrier to wind driven air and water infiltration, and supports proper contact between the door bottom and sill for insullation and maintenence. Made of aluminum, this threshold accommodates most single, hinged patio and French door system configurations with the door swinging outward. DIMENS

Outswing Exterior Door Threshold Ramp - Mill Finish

The Outswing Exterior Door Threshold - Mill Finish - ADA Compliant is a threshold ramp designed to modify a doorway to make it wheelchair accessible. A continuous dam provides a sill with a positive barrier to wind driven air and water infiltration, and is conducive to proper contact between the door bottom and sill for insulation and maintenance of the structure. Made of aluminum, the unit accomodates most single, hinged patio and french door system configurations in which the door swings outwa

Outta Bed

Outta Bed is a bed mobility aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. This device can be positioned for right- or left-side use and mounts primarily to the bed frame of a standard home flat bed as well as to the floor and wall for added stability. This device can be used to assist in transfers to and from bed and to and from a wa

Over 40 Magnifier And Flashlight

Over 40 Magnifier and Flashlight is a video magnification program designed for use by individuals with low vision. This program enables an Apple iPhone, iPod Touch or iPad to function as a magnifying glass for people who have difficulty seeing. The program has modes for people who are left-handed and right-handed as well as a "Full Screen" mode. In any of the modes, the user selects the zoom, or magnification strength, from 1x to 10x by touching the “Zoom” icon on the screen. For users with an i

Over-Chair Table

CUSTOM ADAPTATION PURPOSE: To enable an individual with Parkinson's disease to engage in a variety of activities while seated in his recliner. The customized table has a large plywood base that fits under the chair and is held in place by the weight of the chair. The chair's castors slot into small holes in the base, holding both the chair and the table completely stable. A post with a spring-loaded carriage that moves up and down from a gym set was mounted to the base. The table support was br

P.t. Rail

The P.T. Rail is a wall grab bar for toilet designed for use by individuals with balance, neurological, or mobility disabilities. This P-shaped unit provides rigid support and features dual offset rails to reduce wrist strain when using the lower rail. This rail is available for right or left side mouting in a fixed model or in a hinged model that folds out of the way when not in use. The hinge holds the rail in whatever position it is placed. OPTIONS: Toilet tissue roll holder and floor mast fo

Paca-Waiter Commercial Dumbwaiter

The Paca-Waiter Commercial Dumbwaiter is a dumb waiter designed for commercial use that can be used as a job accommodation by people with disabilities. The unit comes standard with steel cable drive, heavy gauge steel angle guide rails with high-density synthetic guides, multi- stop operation, push button control, and an electromagnetic disc brake. Cars are constructed of enamel-finished sheet steel, and have 1, 2, or 3 openings; swing, bi-parting, and sliding hoistway doors are available. The m

Padded Folding Shower Bench (Model Apm4210P)

The Padded Folding Shower Bench is a wall- mounted folding shower seat designed for use by individuals with balance, mobility, neurological, or lower extremity disabilities. This shower seat is hinged on the wall and folds down for use. Features include two stainless steel tubular legs for support and a wide, padded seat. DIMENSIONS: The seat is 23 inches wide and the minimum base width is 32.25 inches CAPACITY: 558 pounds. COLOR: Grey.

Paddle Latch Operator (Model 4590)

The Paddle Latch Operator, model 4590, is a door latch operator designed for use by individuals with fine motor disabilities. It is available for pushing or pulling to the left or the right with Adams Rite 4500, 4900, or MS+1890 series latches. SIZES: For door thicknesses of 1-3/4, 1-13/16 to 2, 2-1/4 to 2-1/2, 2-3/4 to 3, or 3-1/4 inches. Larger custom sizes are available. COLOR: Available with dark anodized bronze, black anodized, or satin aluminum anodized finish.

Panorama Residential Elevator

The Panorama Residential Elevator is a home elevator designed for use by individuals with walking, mobility or lower extremity disabilities or arthritis and others who use wheelchairs or have difficulty walking up or down stairs. This elevator has several standard and optional features to help the user create a customized elevator that meets individual needs. It can be designed into new home construction or added to existing homes. The Panorama has a 1:2 cable hydraulic drive with a maximum oper

Park Here For Assistance Sign (Model Sg-106F)

The Park Here For Assistance Sign, model SG-106F, is an access sign designed for use to indicate sources of assistance for individuals with disabilities. This sign can be used at polling places to indicate where voters with disabilities can find assistance. The sign has the International Access Symbol (a stylized drawing of an individual seated in a wheelchair) in the middle, with the words "PARK HERE" above the symbol and the words "FOR ASSISTANCE" below. The sign is made from corrugated plasti

Parking - Please Back In Sign (Model Sg-107F)

The Parking - Please Back In Sign, model SG-107F, is a parking marker and access sign designed for use to indicate accessible parking for wheelchair users in rear entry vehicles. The sign has an International Access Symbol (a stylized drawing of an individual seated in a wheelchair) with the words, "PARKING PLEASE BACK IN," beneath the symbol. The sign is made from Corrugated Plastic for all weather conditions and attaches to the Corrugated A-Frame (model SG-F), which is sold separately. DIMENSI

Parking Curbside Voters Only Suction Cup Sign (Model 205)

The Parking Curbside Voters Only Suction Cup Sign, model 205, is a parking area marker and access sign designed for use to indicate the availability and location of curbside voting for voters with disabilities. The sign can be placed in a window on election day when curbside voting is available. The words "Curbside Voters" run diagonally from lower left to upper right, while the word "Parking" is in the upper left and the word "Only" is in the lower right. The sign comes with 3 suction cups and

Passport Series Cabinets

Passport Series Cabinets are accessible cabinets for the home office and kitchen designed for use by wheelchair users and individuals of short stature. This universal design series combines traditional cabinetry with features such as low countertops and drawers.

Pathlights

The PathLights are motion-activated night lights designed for use by people with low vision and others that may need assistance navigating in low light conditions. The PathLights can be mounted along a stairway, hall or other walkway. When mounted in a series, these round LED lights will illuminate in sequence to guide a person along a path. Once one of the lights is triggered by its motion sensor, the units communicate wirelessly with each other so that they light up in sequence down the stair

Pathway Lite (Models As2, As3, As4, As5, As6, As7 & As8)

The PATHWAY Lite are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied non-skid surface. Each PATHWAY Lite ramp has a self-adjusting bottom transition plate. DIMENSIONS (LxW): 24 x 32 inches (model AS2); 36 x 32 inches (model AS3); 48 x 32 inches (model AS4); 60 x 32 inches (model AS5); 72 x 32 inches (model AS6); 84 x 32 inches (model AS7); or 96 x 32 inches (mod

Pawling Gymtile

Pawling Gymtile is a cushioned rubber mat designed to provide a harmless play surface. It consists of nonskid rubber interlocking floor tiles. It can be cut, and uses no adhesive. The beveled edge and borders provide a finished appearance. Various colors are available. DIMENSIONS: Each tile is 12 x 12 x .37 inches. WEIGHT: 10 pounds.

Pedestal Drinking Fountain (Models 3500, 3500D & 3500Fr)

The Pedestal Drinking Fountain, models 3500, 3500D and 3500FR, is an accessible drinking fountain designed for use by individuals who use a wheelchair. This unit has two fountains, one at the top of the pedestal and one at the end of a horizontal extension, with push button valves. The unit is made of 12 gauge Type 304 stainless steel, along with integral .375-inch thick cast stainless bowls. This fountain is trimmed with a glossy powder-coat finish, and it is secured to the ground with an integ

Pedestal-Mounted Drinking Fountain (Model 3177 & 3177Fr)

The Pedestal-Mounted Drinking Fountain, model 3177 and 3177FR, is an accessible drinking fountain designed for use by individuals who use a wheelchair. This wheelchair accessible unit features a single fountain in a curved design, with a recessed push-button valve. The fountain is made from reinforced concrete and has a polished stainless steel basin and valves. Model 3177FR has freeze-resistant components. Its waste strainer allows for top down access. DIMENSIONS (HxL): 36 x 27 inches. The base

Pedestrian Push Button

The Pedestrian Push Button is a pedestrian signal control switch designed to be used at pedestrian crossings and other locations by individuals with fine motor disabilities or low vision. This solid-state Piezo switch is protected against moisture and has a rated life in the tens of millions of activations (20 million minimum). The buttonswitch cannot get jammed or stuck in the "on" position. It has a polycarbonate outer body surrounding the button, and a button cap made of polycarbonate or stai

Pedi Crib Bed

The Pedi Crib Bed and Top are designed to prevent a child from crawling out. It has standard round rails on the sides. OPTIONS: Extended stainless rails and a bubble top are available. Inhalation tents also available to fit over the entire crib. SIZE: Available in 2 sizes.

Pediatric Ball Chair (Model Ap 400)

The Pediatric Ball Chair is a posture chair designed for use by children with physical or neurological disabilities. This chair is designed to promote dynamic active sitting to strengthen a child's back and help his/her posture. The chair consists of a frame, with a back rest, that holds a therapy ball as the seat of the chair. The latex-free ball can be inflated to different sizes to accommodate the child. The frame has non-locking casters for mobility, and the four legs are height adjustable.

Pediatric Suitcase Ramp (Models Ap 7055 & Ap 7056)

The Pediatric Suitcase Ramp is a portable ramp designed for use by children with mobility disabilities, neurological disabilities, severe physical disabilities, or spinal cord injury. This portable ramp accommodates pediatric scooters, walkers, and wheelchairs. The ramp is hinged and folds in half to be carried like a suitcase. Made of aluminum, the ramp has a durable, non-skid surfaceand a built-in carrying handle. CAPACITY: 600 pounds. DIMENSIONS (LxW): Model AP 7055 is 5 x 2 feet and model A

Peephole Viewer

The Peephole Viewer is a peephole designed for use by individuals with low vision or seniors. The viewer pops into the existing peephole and features a liquid crystal display (LCD) panel for a larger, clearer, easier-to-see image. The unit compensates for "fish eye" distortion and has an anti-reverse feature so the user does not darken the peephole when moving up to the peephole. The unit offers regular and zoom modes. A base flange, a tightening tool, and a user's manual are included. POWER: Us

Pem Stab Mat

The PEM STAB Mat is non slip outdoor matting intended to convert wet ground, mud, sand and other soft or other unstable ground into a firm, stable and slip-resistant surface. It is specifically designed for outdoor use. The bottom of the mat is studded so it grips any soft surface on which it is laid. The surface of the matting has a unique porous looping design that creates a durable textured surface that allows moisture to flow through the footing surface and eliminates standing water. The m

Pemko Barrier Free Ramp Threshold (Model 257X259)

The Pemko Barrier-Free Ramp Threshold, model 257X259, is a modular threshold ramp designed for use to provide accessible thresholds for wheelchair users and individuals with mobility or walking disabilities. This ramp is available in cast aluminum, extruded bronze (brass), or anodized aluminum. OPTIONS: PemKote non-slip coating; cast aluminum wings (model WING10) that fit into each end of the ramp assembly and are fastened to the ramp mid sections with self-tapping machine screws. COLOR: Aluminu

Pemko Modular Ramp Threshold Assembly For Fluxh Applications (Models R.5F, R.75F, R1F, R1.25F, R1.5F, R1.75F, R2F, & R2.25F)

The Pemko Modular Ramp Threshold Assembly for Flush Applications is a modular threshold ramp designed for use to make doorways and floor offsets accessible to wheelchair users and individuals with mobility or walking disabilities. The ramp assembly is made from mill finished aluminum. The number of assembly components is 1 (model R.5F), 2 (models R.75F and R1F), 3 (models R1.25F and R1.5F), 4 (models R1.75F and R2F), or 5 (models R2.25F). The assembly comes with with #10 stainless steel wood scr

Pemko Recycled Rubber Ramp Assembly (Model Rr1.25Fmr)

The Pemko Recycled Rubber Ramp Assembly, model RR1.25FMR, is a modular threshold ramp designed for use by individuals with mobility or walking disabilities. It can be used at door thresholds or to transition between offset floors. The ramp has a diamond waffle pattern for traction. It can be field cut and coped, and is installed by gluing it to floor surfaces. The ramp is molded from 100 percent recycled rubber tires (20 mesh minus crumb reclaimed rubber with urethane binders). DIMENSIONS: 36, 4

Person Lift

Mobile home lift with chair and step. Skid resistant platform lift attaches to side of recreational vehicle. Standard 48 inch lift travels 40 inches and lifts up to 250 pounds. Lift tube dimensions: 50 inches high by 2.25 inches in diameter. Platform removes for storage. Platform weight: 20 pounds. Platform dimensions 2 inches by 13 inches by 16 inches. Chair lift component of system: seated person is raised and swings into recreational vehicle using double hinged bracket. Aluminum chair removes

Personal Work Table With Tilt Top (Model 76-31K)

The Personal Work Table with Tilt Top, model 76-31K, is a height-adjustable tilt top work table designed for use by individuals who use wheelchairs. The top tilts from 0 to 50 degrees and is equipped with a lip on the front edge to keep objects in place. The legs are adjustable with an indexing plunger. OPTION: 3.5-inch locking dual-wheel casters. DIMENSIONS (HxLxW): 23 to 33 x 36 x 30 inches.

Personalized Symbol Of Access Signs

The Personalized Symbol of Access Signs are designed to permit special messages to be included on the parking and facility signs with the international access symbol on them. These semi-finished signs have pre- printed symbols and flat screened messages. Custom wording is permanently applied in white vinyl lettering. The signs will accommodate 2, 3, or 4 2- inch lines of copy with 9 characters per line. The signs are made of 18 gauge steel. DIMENSIONS: 12 x 18 inches. COLOR: White lettering on b

Phillips Respironics Heated Hose Adaptor For Soclean

The Philips Respironics Heated Hose Adapter for the SoClean is designed for use by individuals that have a respiratory disability or condition, so that those individuals may clean the hose of a Continuous Positive Air Pressure or CPAP machine more easily. Compatible with all SoClean models of CPAP machines. Connects a Philips Respironics heated hose and connects to the SoClean in order to sanitize the hose. Includes: 1 Philips Respironics Heated Hose Adapter. Due to hygiene purposes, this item i

Phillips Respironics Heated Hose Adaptor For Soclean

The Philips Respironics Heated Hose Adapter for the SoClean is designed for use by individuals that have a respiratory disability or condition, so that those individuals may clean the hose of a Continuous Positive Air Pressure machine more easily. Compatible with all SoClean models. Connects a Philips Respironics heated hose to connect to the SoClean to sanitize their hose. Includes: 1 Philips Respironics Heated Hose Adapter. Due to hygiene purposes, this item is non-returnable. Shipping and Han

Picnic Tables (Wct8 Series)

Accessible picnic table. Tubular galvanized steel frame. Wooden or anodized aluminum top and seats. Tabletop extends out 12 inches on each end. DIMENSIONS: 8 feet x 4 feet 9 inches x 31 inches high. WEIGHT: 184 pounds.

Pilot Lift

The Pilot Lift is an exterior seat lift designed to adapt to a variety of transportation and mobility applications. It features three-way directional movement that allows comfortable access to a full 360 degrees and a compact mounting system. The user has easy control of the lift from a hand-held control. The lift has a variety of applications including farm tractors and harvesters, small lawn tractors, pick-up trucks, airplanes and boats. There are three different variations of the Pilot Lift.

Pilot One

The Pilot One is a voice controlled Environmental Control Unit (ECU) designed for use by individuals with limited mobility due to Multiple Sclerosis, Spinal Cord Injuries or Strokes. Pilot One controls any infrared (IR) device in the home or facility, including TV, cable, satellite, DVD, and new technology remotes such as Roku and Apple TV. Features include, pre-programmed menu structure, IR and X-10 interfaces, voice training with no computer required, graphic display, auditory and visual feedb

Plastic Tub Grab Bar With Handle (Model 8222)

The Plastic Tub Grab Bar with Handle, model 8222, is a bathtub grab bar designed for use by individuals with balance or mobility disabilities. This tub grab bar has a blow-molded handle and an anti-skid clamp. DIMENSIONS: The clamp adjusts to fit bathtub sides from 3.5 to 6.5 inches. COLOR: Red handle with white clamps.

Platform Edge Warning Surface

The Platform Edge Warning Surface is a detectable warning surface designed for use along off-street rail platforms by with blindness or low vision. Made of stone and resin composite, this tile serves as a warning and to identify the location of off-street rail platforms. The blister surface can be read by foot or cane, warning individuals with vision disabilities that they are approaching a rail platform edge. The blister pattern is offset and can be used to identify the direction the platform e

Play Unlimited System (Model E9805)

Multi-purpose recreational structure for gross motor play. Wheelchair accessible. Includes cargo net, rung enclosure, trapeze swing, steering wheel enclosure, tic-tac-toe, tube slide, corkscrew climber, climbing pole, bubble panel, spiral slide, horizontal ladder, multi-decks, stairs, ramps, and suspension bridge. DIMENSIONS: Ground space: 46 feet 8 inches x 39 feet 9 inches.

Play Unlimited System Le9806

The Play Unlimited System No. LE9806 is a wheelchair jungle gym that provides accessible barrier-free design for physical, psychological, and therapeutic gross motor play. The system is large enough for an adult to aid children who need assistance. The gym has multiple decks that are wide enough for wheelchairs to access. ACTIVITIES: Trapeze swing, Tic-Tac-Toe, bubble panel, steering wheel enclosure, corkscrew climber, coaster climber, Lexan spiral slide, standard slide, access stairs and ramps.

Play Unlimited System Le9807

The Play Unlimited System LE9807 is a wheelchair jungle gym and climbing structure that provides young wheelchair users and able-bodied children an accessible, barrier free environment where they can engage in gross motor play. The structure has multiple decks made of a wire mesh and one access ramp. ACTIVITIES: Half-space climb, crawl tube, Lexan spiral slide, Tic- Tac-Toe board, arch climber, steering wheel enclosure, access stairs, tube slide, corkscrew climber, and rung enclosure. GROUND SPA

Play Unlimited System Le9808

The Play Unlimited System LE9808 is a wheelchair jungle gym and climbing structure that provides gross motor play activities for young wheelchair users and able-bodied children. The decks are made of metal mesh, and there is an access ramps at each end of the structure. ACTIVITIES: coaster climber, access stairs, trapeze swing, steering wheel enclosure, Lexan spiral slide, and Tic-Tac-Toe. GROUND SPACE: 28 feet 11 inches by 27 feet, 6 inches. WEIGHT: 2658 pounds. WARRANTY: 1-year on materials an

Play Unlimited System Le9809

The Play Unlimited System LE9809 is a wheelchair jungle gym and climbing structure providing an accessible, barrier-free design for wheelchair users and able-bodied children alike to engage in gross motor play. The structure has multiple decks and two end ramps. ACTIVITIES: Spiral slide, small bubble panel, suspension bridge, Tic-Tac-Toe board, steering wheel enclosure, chinning bar, rung enclosure, arch climbers, curved slide, tube slide, rung access, ramp, and climbing pole. GROUND SPACE: 36 f

Playbooster (Design 9111)

Playground system with ramps and accessible features that can be used by all childen including those in wheelchairs. 19 play events. 7 decks with ramps, highest 70 inches. 33 feet 7 inches by 37 feet 6 inches.

Playground Structure (Model 8904)

Accessible playground equipment. Interconnecting wheelchair accessible bridges and ramps. Ramp design includes optional curbs. Single or double handrails available. Play area includes a variety of stand alone events for upper body development. Actual size: 48 by 50 feet. Minimal area required: 58 by 62 feet. 25 play events. 5 decks, highest at 42 inches. Number of children 45 to 55.

Plaza Pedastal Square Picnic Table - Wheelchair Accessible (Models T46Rcped-3S & T46Rcped-3Sm)

The Plaza Pedestal Square Picnic Table - Wheelchair Accessibleis a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This table has seats on three sides with space for a wheelchair on the fourth side. It has a one-piece powder-coated steel frame, with table tops and seats made of plastic-coated steel. The table top has a hole for an umbrella. Model T46PED-3S is designed for in-ground mounting, and model T46PED-3SM is designed for surface mo

Plaza Square Picnic Table - Wheelchair Accessible (Model T46Rcpedpor3)

The Plaza Square Picnic Table - Wheelchair Accessible, model T46RCPEDPOR3, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This portable table has three seats, with space for a wheelchair on the fourth side. It has a one-piece powder-coated steel frame with a plastic-coated steel table top and seats. The table top features an umbrella hole. DIMENSIONS (HxLxW): The table top is 31 x 46 x 46 inches. The seats are 18 x 38 x 10.5 inches.

Pneumatic Vacuum Elevator

The Pneumatic Vacuum Elevator is an elevator designed for use by individuals who use wheelchairs and individuals with mobility or walking disabilities. The elevator consists of an external cylinder, an elevator car, and a suction assembly. The external cylinder is a clear, self-supporting tube with walls made of curved polycarbonate sheets supported by an aluminum structure. The doors are made of the same material; they are air tight and provided with elevator code-certified locks. The roof of t

Polarized Car Visor For Day And Night Driving With Adjustable Slider

The Reizen Polarized Car Visor for Day and Night Driving with adjustable slider is designed for those individuals who have a disability that affects their vision and is good for contact wearers, persons who drive in the sun for long periods, persons with Diabetic retinepathy or Corneal dystrophy, as well as for those who are developing cataracts, and/or persons who had contact surgery. This product fits all cars, vans, pick-ups, Recreational Vehicles or RV's, campers, trucks, and boats. Slider a

Poll Master I With Ada Handicap Adapter (Model Pmi-Hdp-L)

The Poll Master I with ADA Handicap Adapter, model PMI-HDP-L, is a wheelchair accessible voting booth designed for use by voters with lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. This unit includes the standard Poll Master I voting booth and an adapter for wheelchair access. This lightweight, portable unit has a wide stance and a low shelf surface for wheelchair access. It is made of ABS plastic with aluminum legs and aluminum stabilizer bars, a

Poll Master Ii With Ada Handicap Adapter (Model Pmii-Hdp-Nl)

The Poll Master II With ADA Handicap Adapter, model PMII-HDP-NL, is a wheelchair accessible voting booth designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs. This unit includes the standard Poll Master II voting booth with an ADA (Americans with Disabilities Act) adapter designed to lower the height of the table while increasing the distance between the legs under the table in order to accommodate a wheelchair. This l

Poll Star Ada Booth (Model 003-Ac )

The Poll Star ADA Voting Booth, model 003-AC, is a wheelchair accessible voting booth designed for use by voters with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs. This lightweight unit has a plastic table, aluminum legs, corrugated plastic curtains, a structural injection molded base, and a corrugated plastic storage container. The side panels can be custom screen printed. OPTIONS: Clip-on fluorescent light. DIMENSIONS: Overall height 54.25 inche

Polling Place (With Handicap Access Symbol) Suction Cup Sign (Model 2066)

The Polling Place (with Handicap Access Symbol) Suction Cup Sign, model 2066, is an access sign designed for use to indicate a wheelchair accessible polling place. The sign has the words "Polling Place" above two International Access Symbols, stylized drawings of figures seated in wheelchairs. The sign can be hung in a polling place window on Election Day. The sign comes with 3 suction cups installed on the sign, and a box for storage and transport. This sign is compatible with the Voter's Choic

Polling Place With Access Symbol Sign (Model 2008)

The Polling Place with Handicap Access Symbol Sign, model 2008, is an access sign designed for use to designate polling places that are accessible to voters with disabilities. The sign has the phrase, "Polling Place," above two International Access Symbols, stylized drawings of a figure seated in a wheelchair, with a row of stars between the two words. The sign is made of durable plastic and is screen printed on both sides. The sign fits the Voter's Choice Portable Sign System (not included). DI

Ponte Giulio Pur Folding Rail

The Ponte Giulio PUR Folding Rail is a wall grab bar for toilet or shower designed for use by individuals with balance, lower extremity, or mobility disabilities. This steel bar folds up against the wall when not in use and has a padded, non-slip surface. The concealed mounting flange is equipped with a multiple hole design for a variety of mounting options. OPTIONS: Hollow wall SNAPTOGGLE mounting kit. DIMENSIONS (LxW): The mounting plate is 9 1/16 x 5 7/8 inches. The overall length is 30 inche

Ponte Giulio Trendy Grab Bar

The Ponte Giulio Trendy Grab Bar is a wall grab bar designed for use by individuals with balance, neurological, or mobility disabilities or lower extremity arthritis. These aluminum bars have a non-slip ABS plastic coating that gives the bar the appearance of wenge wood. The concealed mounting flange has an eleven-hole design for a variety of mounting options. OPTIONS: SNAPTOGGLE mounting kit. DIMENSIONS: Available in 16, 18,24, or 36 inches long. These bars are 1.25 inches in diameter and the d

Ponte Giulio Tubocolor Abs Folding Shower Seat

Ponte Giulio Tubocolor ABS Folding Shower Seat is a wall-mounted folding shower seat designed for use by individuals with balance, mobility, or lower extremity disabilities. Made of ABS plastic, this seat has drainage slots and folds up against the wall when not in use. This seat also has an extended ABS base made of seamless zinc-plated steel pipe and coated with bio-compatible, warm-to-the-touch vinyl. DIMENSIONS (WxD): The seat is 13 x 12 5/8 inches. The unit is 16 15/16 x 16 15/16 inches ov

Portable Bidet

This Portable Bidet is designed for the elderly, disabled or those individuals who have a mobility disability that makes it challenging to neatly use the restroom. This small device attaches to a water bottle and produces a stream of water that can be focused to the desired wash area. Lightweight. Clean with soap and water. Made of plastic.

Portable Perfolite Fixed Ramp (Models V5, V10 & E1)

The Portable Perfolite Fixed Ramp, models V5, V10 and E1, is a portable two-piece curb ramp designed to enable wheelchair users to get over curbs or steps. The ramp is made from perforated aluminum which does not allow the collection of rain, snow or dirt. It comes as a pair of single-piece tracks and includes a carrying handle. DIMENSIONS (LxW): 21.75 x 8.25 inches (V5); 45.75 x 8.25 inches (V10); or 41.75 x 10.5 inches. CAPACITY: 880 pounds per pair. WEIGHT: 3.5 pounds per ramp (V5); 7 pounds

Portable Perfolite Folding Ramp (Model V11, V15, C20, 110 U & 200 U)

The Portable Perfolite Folding Ramp, models V11, V15, V20, 110 U and 200 U, is a two-piece folding track designed for use to provide access for wheelchair users, including individuals with lower extremity or mobility disabilities or spinal cord injury. This ramp is made from perforated aluminum which does not allow the collection of rain, snow or dirt. Ramps are sold in pairs. Models V15, V20, 110 U and 200 U have variable lengths. Models V11, V15, and V20 have carrying handles. Models V11 and 1

Portable Perfolite Folding Telescopic Ramp (Models E2/3 & V30)

The Portable Perfolite Folding Telescopic Ramp, models E2/3 and V30, is a portable folding telescoping two-piece ramp designed to enable wheelchair users to get over curbs or steps. The ramp is made from perforated aluminum which does not allow the collection of rain, snow or dirt. It comes as a pair of folding, telescoping tracks and includes a carrying handle. Model E2/3 is recommended for 2 steps, and model V30 is recommended for 3 steps. DIMENSIONS (LxW): 30.25 to 82.5 x 9.75 inches (E2/3);

Portable Perfolite Telescopic Ramp (Models U2, U2/3, & U3)

The Portable Perfolite Telescopic Ramp, models U2, U2/3, and U3, is a portable telescoping two-piece ramp designed to enable wheelchair users to get over curbs or steps. The ramp is made from perforated aluminum which does not allow the collection of rain, snow or dirt. It comes as a pair of single-piece, telescoping tracks and includes a carrying handle. Models U2 and U3 are recommended for curbs and stoops; model U2/3 is recommended for 2 steps. DIMENSIONS (LxW): 45.75 to 91.5 x 7.5 inches (U

Portable Toilet Rails (Model 5475)

Adjustable height portable free standing toilet safety frame. No installation or attachment to toilet, fits closely around toilet. Waterfall armrests and rubber leg tips. Anodized aluminum tubing. Adjustable height 24 1/2 to 28 1/2 inches, width 20 1/2 inches, depth 18 inches. Weight 3 1/2 pounds.

Portable Vertical Lift

The Portable Vertical Lift is a portable elevator designed for use by individuals with mobility disabilities. This portable lift can be set up and then stored away when not in use. It has a metal platform, a screw drive, soft touch control pads, and a keyed emergency stop. The unit's wheels are locked in position when the lift is in use. The platform has a lifting height of up to 52 inches. OPTIONS: 24-volt direct current (DC) full battery backup; straight through access with lower access on the

Portamat2 Portable Access Mat (Model 1225)

The Portamat2 Portable Access Mat, model 1225, is a portable, reusable, temporary boardwalk and access mat system that can be used for flooring and walkways on many different outdoor surfaces including sand, mud, grass, shallow snow, and loose gravel. It can be used to provide an access route for wheelchair users and others with lower extremity or mobility disabilities. Its modular pieces can be placed in rolls or used individually. The surface protects fragile environments from damage due to p

Posey Comfort Pad (Models 6324, 6340 & 6360)

The Posey Comfort Pad, models 6324, 6340 and 6360, is a decubitus pad designed for use by individuals at risk for pressure sores. This decubitus pad is made of synthetic fur and is machine washable. Standard or lightweight available. DIMENSIONS: 24 x 30 inches (model 6324); 30 x 40 inches (6340); 30 x 60 inches (6360).

Posey Pressure-Relief Positioning Roll (Models 6304, 6304Sc, 6305, & 6305Sc)

The Posey Pressure-Relief Positioning Roll is a body positioners designed for use by individuals at risk for pressure sores or who require positioning assistance while seated or in bed. The roll provides full body support in lateral or dorsal positioning, and its flexible construction conforms to the user's body, reducing pressure. The role has a strap to secure it to a bed, chair or wheelchair. The straps can also be used to tie one roll to another. Models 6304 and 6304SC are high density for m

Posey Soft Split Side Rail Protectors (Models 5705 & 5705Ls)

The Posey Soft Split Side Rail Protectors, models 5705 and 5705LS, are side rail pads designed to provide protection from injury from bed side rails. These pads provide protection and can be used to close the gap between the half rails to deter users from exiting the bed between the rails. These foam pads are covered in wipe-clean vinyl and secure to most rails with the attached hook and loop straps. Available in an open bar side rail design (model 5705) and encapsulated side rail design (5705LS

Positioning Chair

CUSTOM ADAPTATION PURPOSE: To provide proper positioning for a child with neurological disabilities. An existing Sebel Hobnob Junior Chair was modified to meet the child's specific needs. A height-adjustable footrest that slides out from under the seat was added. The chair was also equipped with glides on the legs for easier movement, and ant-tips were added to the rear legs. For more precise support, a removable lateral plywood insert was added to the seat. The insert was removable when the ch

Positioning Table

CUSTOM ADAPTATION PURPOSE: To provide proper positioning for a child with neurological disabilities. This table is designed to provide the child with proper postural positioning while allowing the child to concentrate on eating, playing, or educational activities while at the table. The table was made of plywood to dimensions specified by the child's therapist and provides space for two children. The table is height adjustable and has a torso cutout at one end to provide the child with close ac

Potti Shower (Model 72628) & Tall-Ette Perineal Cleaner (Model F72629)

The Potti Shower Toilet Perineal Cleaner, model 72628, is a plastic spray device that attaches to the bottom of the toilet seat to provide cleansing water spray to the anal and genital area. The device can be swivelled out of the way when not in use. A flexible tube 12 feet long links the device to the bathroom sink faucet. A diverter valve with push button operation connects to the faucet but does not interfere with sink operation. The Tall-Ette Potti Shower Perineal Cleaner, model 72629, is th

Power Access Automatic Door Opener (Model 4300)

The Power Access Automatic Door Opener, Model 4300, is designed to convert side hinged doors to automatic opening ones for people with disabilities. It is widely used for accessibility in schools and homes. This automatic door opener interfaces with environmental control systems and electric lock for door security. Activation controls include: touch plate, push button, push plate, radio transmitter, mats or momentary dry contact signals. Door opening pressure is adjustable; hold-open time is al

Power Access Residential Door Opener (Model 2300)

The Power Access Residential Door Opener, model 2300, is a powered door opener and closer designed for use by individuals with upper extremity or mobility disabilities or spinal cord injury. The unit fits in most interior and some exterior doors. Left- and right-hand door openers are available, and the hand is adaptable. The unit has a low profile to fit when there is limited room above the door. Safety features include the ability to be opened manually from either side; a friction clutch that c

Powered Armchair Modification

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted armchair for an adult with Charcot Marie Tooth Disease, a disease similar to Muscular Dystrophy, which causes muscle weakness and foot drop, making it difficult to walk. The individual had used a powered lounge chair to watch television. The chair had a remote control which tilted the chair at an angle that would lift the individual forward and hold him into an almost standing position to help him transfer to his walker and

Powered Elevated Chair

CUSTOM ADAPTATION -- PURPOSE: To provide a customized lifting chair for an individual with mobility disabilities that can be easily moved throughout a residential setting, including going through doorways. The chair has a U-shaped base made of rectangular hollow steel with a vertical post at the back, and large casters on the front ends of the U and smaller ones at the back. There are also larger bike-type wheels on either side which can be used to propel the chair if necessary. Additionally, th

Powermatic Door Operator (Model 6900)

The PowerMatic Door Operator, model 6900, is a powered door operator designed to make facilities accessible to individuals mobility disabilities. This unit automatically opens and closes with a lower energy opening force, and offers obstruction detection during both opening and closing cycles. It is handed and is available for either push- or pullside mounting,

Precast Concrete Round Table - Wheelchair Accessible (Model Rotsh)

The Precast Concrete Round Table - Wheelchair Accessible, model ROTSH, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This round table has three seats with space for a wheelchair on the fourth side. It is made of steel-reinforced concrete with a smooth base and a polished table top and seats. OPTIONS: Umbrella hole. DIMENSIONS: The table is 30 inches high with an outside diameter of 56 inches. The table top diameter is 38 inches. Th

Preemie / Bassinet Acid Reflux (Ar) Pillow

The Preemie/Bassinet Acid Reflux Pillow is a wedge pillow designed for use with babies with gastric reflux or eating and digestive disabilities. This pillow includes a quilted poly/cotton harness and head ring to hold a newborn safely and maintain a 30-Degree angle, the optimal angle to relieve acid reflux, gastroesophageal reflux, Barrett's Syndrome, post surgical conditions, etc. naturally. The head ring is attached under the cotton pillow sheet with Velcro to the pillow surface. The quilted p

Premium Waterproof Sheet Protector (Modelp13605)

The Premium Waterproof Sheet Protector, model P13605, is a waterproof sheet designed for use by individuals with incontinence. The mattress features a polyester surface, and polyester/ rayon vinyl backing. The polyester fabric sheet keeps fluids away from the surface of the mattress leaving a comfortable and ultra dry surface. SIZE: Twin. COLOR: Mint.

Presidential Walk-In Bathtub

The Presidential Walk In Bathtub is an accessible bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. This deep-soak walk-in tub has an infinite speed, hydrotherapy air spa system with twenty-four hydro-ports. Each hydro-port contains seven jets for a total of 168 warm jets to surround and massage the entire body. The tub is made from acrylic on the outside and steel-reinforced fiberglass on the inside, with a high gloss protective finish. Other fea

Preso Matic Double Combination Lock (Models Dc9101, Dc9102Lt, & Dc9200)

Preso Matic Double Combination Lock, models DC9101, DC9102LT, & DC9200, is a keyless door lock designed for use by individuals with fine motor or grasping disabilities. These mechanically operated 4- or 7-digit combination locks are for in-or-out swing doors. Models DC9101 and DC9102LT are manually-locking deadbolt locks with a hardened steel free turning bolt. Model DC9200 is an automatic locking deadlatch lock with a hardened steel throw spring deadlatch bolt. DIMENSIONS: 5/8 inch bolt pro

Preso Matic Keyless Entry Lock (Models 8101, Lt8102, 8200, & 8200A)

Preso Matic Keyless Entry Lock, models 8101, LT8102, 8200, and 8200A, is a keyless door lock designed for use by individuals with fine motor or grasping disabilities. These mechanical keyless entry door locks are operated by pushbutton combination. The keypad has 10 pushbuttons, operated by pressing a 4 or 7 digit combination. The lock unlocks automatically when last digit is pressed. No knobs to turn or twist. Unlocks on the interior by pressing the unlock button. Models 8200 and 8200A have a d

Pressalit Toilet Supports

Pressalit Toilet Supports are grab bars designed for providing additional support to individuals using the toilet. They are available in wall-mounted or free standing frame styles, with or without front support legs, and with or without height adjustability. The wall models fold up to the wall. OPTIONS: Front chest supports, back supports, back with side supports, and a toilet paper holder.

Pressure Care Assistant

The Pressure Care Assistant is a decubitus pad designed for use by individuals at risk for pressure sores/ulcers. Made of Australian HiTemp UR Medical Sheepskin, this strip is used at the base of the bed to prevent heel pressure sores. The strip has side flaps that wrap around the mattress to keep it in place. This pad provides protection while maintaining freedom of foot movement. DIMENSIONS (WxL): 12 X 26 inches.

Prestige Series Wall Switches (Models D33 & D33T)

The Prestige Series Wall Switches are designed to activate full- and low-energy powered doors for individuals with mobility or upper extremity disabilities. Available in a hardwired pushplate switch (model D33) or a wireless pushplate switch with a radio transmitter (model D33T), the switch provides switch closure at the door control and may be used with any powered door operator. The unit features a high-impact, textured polycarbonate plastic enclosure for weather resistance, better transmissio

Pride Classic 2-Position Partial Recline Lift Chair (Model Cl-10)

The Pride Classic 2-Position Partial Recline Lift Chair, model CL-10 is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a

Pride Classic 2-Position Partial Recline Lift Chair (Model Cl-20)

The Pride Classic 2-Position Partial Recline Lift Chair, model CL-20 is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a

Pride Classic 3-Position Full Recline Chaise Lounger (Model Cl-30)

The Pride Classic 3-Position Full Recline Chaise Lounger, model CL-30, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a c

Pride Classic 3-Position Full Recline Lift Chair (Model Cl-15)

The Pride Classic 3-Position Full Recline Lift Chair, model CL-15, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord.

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-450)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-450, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both recline and lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. T

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-550L)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-550L, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. B

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-550M)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-550M, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. B

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-550S)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-550S, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. B

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-585)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-585, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both recline and lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. T

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-590)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-590, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both recline and lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. T

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-595)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-595, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Bo

Pride Elegance 3-Position Full Recline Large Chaise Lounger (Model Lc-570L)

The Pride Elegance 3-Position Full Recline Large Chaise Lounger, model LC-570L, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitt

Pride Elegance 3-Position Full Recline Medium Chaise Lounger (Model Lc-570M)

The Pride Elegance 3-Position Full Recline Medium Chaise Lounger, model LC-570M, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sit

Pride Elegance 3-Position Full Recline Petite Chaise Lounger (Model Lc-570P)

The Pride Elegance 3-Position Full Recline Petite Chaise Lounger, model LC-570P, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sit

Pride Elegance 3-Position Full Recline Petite Wide Chaise Lounger (Model Lc-570Pw)

The Pride Elegance 3-Position Full Recline Petite Wide Chaise Lounger, model LC-570PW, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing a

Pride Elegance 3-Position Full Recline Small Chaise Lounger (Model Lc-570S)

The Pride Elegance 3-Position Full Recline Small Chaise Lounger, model LC-570S, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitt

Pride Elegance 3-Position Full Recline Wide Chaise Lounger (Model Lc-570W)

The Pride Elegance 3-Position Full Recline Wide Chaise Lounger, model LC-570W, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitti

Pride Heritage 2-Position Partial Recline Chaise Lounger (Model Gl-358Xxl)

The Pride Heritage 2-Position Partial Recline Lift Chair, model GL-358XXL, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair

Pride Heritage 2-Position Partial Recline Lift Chair (Model Gl-58)

The Pride Heritage 2-Position Partial Recline Lift Chair, model GL-58, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by

Pride Heritage 3-Position Full Recline Heavy-Duty Chaise Lounger (Model Gl-358Xl)

The Pride Heritage 3-Position Full Recline Heavy-duty Chaise Lounger, model GL-358XL, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to t

Pride Heritage 3-Position Full Recline Large Chaise Lounger (Model Gl-358L)

The Pride Heritage 3-Position Full Recline Large Chaise Lounger, model GL-358L, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the cha

Pride Heritage 3-Position Full Recline Medium Chaise Lounger (Model Gl-358M)

The Pride Heritage 3-Position Full Recline Medium Chaise Lounger, model GL-358M, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the ch

Pride Heritage 3-Position Full Recline Petite Chaise Lounger (Model Gl-358P)

The Pride Heritage 3-Position Full Recline Petite Chaise Lounger, model GL-358P, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the ch

Pride Heritage 3-Position Full Recline Petite Wide Chaise Lounger (Model Gl-358Pw)

The Pride Heritage 3-Position Full Recline Petite Wide Chaise Lounger, model GL-358PW, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to

Pride Heritage 3-Position Full Recline Small Chaise Lounger (Model Gl-358S)

The Pride Heritage 3-Position Full Recline Small Chaise Lounger, model GL-358S, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the cha

Pride Media Chair (Model Lc-900)

The Pride Media Chair, model LC-900, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift

Pride Silverstar Single Fold Ramp

The Silver Star Single Fold Ramp is a curb or threshold ramp designed for use by individuals with mobility disabilities. This lightweight, portable ramp has an integrated, high traction surface, and can be used to overcome a variety of obstacles at home and during travel. DIMENSIONS (LxW): 2, 3, 4, 5, or 6 feet x 29.5 inches. CAPACITY: 600 pounds. WARRANTY: 3-year transferable warranty.

Pride Silverstar Solid Ramp

The Pride SilverStar Solid Ramp is a ramp designed for use by individuals with mobility disabilities. This lightweight aluminum ramp has built-in traction control and side rails for safety, and is slotted for moisture drainage. It comes with securement components for mounting. DIMENSIONS (LxW): 1.5, 2, 3, 4, or 5 feet x 30 inches. CAPACITY: 600 pounds. WARRANTY: 3 year transferable warranty.

Pride Specialty 2-Position Partial Recline Wall Hugger Chaise Lounger (Model Ll-805)

The Pride Specialty 2-Position Partial Recline Wall Hugger Chaise Lounger, model LL-805, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connecte

Pride Specialty 3-Position Chaise Lounger (Model Lc-102)

The Pride Specialty 3-Position Chaise Lounger, model LC-102, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. This model chair differs from most other Pride lift chair models in that it is constructed with an overall smaller frame. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Bot

Pride Specialty 3-Position Full Recline (Model Gl-310)

The Pride Specialty 3-Position Full Recline Lift Chair, model GL-310, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a co

Pride Specialty 3-Position Full Recline Chaise Lounger (Model Lc-105)

The Pride Specialty 3-Position Full Recline Chaise Lounger, model LC-105, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by

Pride Specialty 3-Position Full Recline Chaise Lounger With Flip-Open Arms (Model Ll-571)

The Pride Specialty 3-Position Full Recline Chase Lounger with Flip-open Arms, model LL-571, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connect

Pride Specialty 3-Position Full Recline Chaise Lounger With Footrest Extension (Model Ll-575)

The Pride Specialty 3-Position Full Recline Chase Lounger with Footrest Extension, model LL-575, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control con

Pride Specialty 3-Position Full Recline Chaise Lounger With Transfer Arms (Model Ll-570T)

The Pride Specialty 3-Position Full Recline Chase Lounger with Transfer Arms, model LL-570T, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connect

Pride Specialty Infinite Position Sleep Full Recline Chaise Lounger (Model Ll-770L)

The Pride Specialty Infinite Position Sleep Full Recline Chaise Lounger, model LL-770L, is a seat lift chair sleeper, and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. Designed for sitting, reclining, standing, and as a bed, this chair features full recline positioning and a lift mechanism that facilitates all three functions. Both the recline, sleep, and li

Pride Specialty Infinite Position Sleep Full Recline Chaise Lounger (Model Ll-770S)

The Pride Specialty Infinite Position Sleep Full Recline Chaise Lounger, model LL-770S, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. Designed for sitting, reclining, standing, and for use as a bed, this chair features full recline positioning and a lift mechanism that facilitates all three functions. Both the recline, sleep, and lif

Pride Specialty Infinite Position Trendenlenburg Chaise Lounger (Model Lc-125L)

The Pride Specialty Infinite Position Trendelenburg Chaise Lounger, model LC-125L, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. Designed for standing, sitting, and reclining, this chair features full recline with infinite Trendelenburg positioning and a lift mechanism that facilitates all three functions. Both the recline and lift m

Pride Specialty Infinite Position Trendenlenburg Chaise Lounger (Model Lc-125M)

The Pride Specialty Infinite Position Trendelenburg Chaise Lounger, model LC-125M, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. Designed for standing, sitting, and reclining, this chair features full recline with infinite Trendelenburg positioning and a lift mechanism that facilitates all three functions. Both the recline and lift m

Pride Specialty Infinite Position Trendenlenburg Chaise Lounger (Model Lc-125S)

The Pride Specialty Infinite Position Trendelenburg Chaise Lounger, model LC-125S, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. Designed for standing, sitting, and reclining, this chair features full recline with infinite Trendelenburg positioning and a lift mechanism that facilitates all three functions. Both the recline and lift m

Prima Bath Step

The Prima Adjustable Height Bath Step is a bathtub access step designed for use by individuals with arthritis or other mobility or balance disabilities. This molded-plastic step with add-on risers reduces the distance from the floor to the top of the bathtub to aid individuals to step into the bathtub more easily. Jointing pieces can be attached at the side or front to make platforms. Moldings are slip-resistant. DIMENSIONS (HxLxW): Step is 2 x 18 x 14 inches. Risers are 1 inch each, and the ste

Prisma Ts Acoustic Pedestrian Signal (Models Ts-903, Ts-904, Ts-907, & Ts-908)

Prisma TS Acoustic Pedestrian Signals are audible pedestrian signals designed for use by individuals who are blind or have low vision. These audible pedestrian signals have ten distinct sounds that can be used to indicate different walking directions. The sounds are produced by a speaker and include a variety of digitally recorded clicks, knocks, and beeps. The volume is automatically adjusted to the ambient noise level, within a range of 55 to 83 decibels. On the top of the housing of the units

Pro Lift

Commercial quality, residential closed cab vertical elevator. Hydraulic (oil) cantilever design. Finished with laminate panels and stainless sleet trim. Lighting is florescent, has emergency lighting. Mushroom head control buttons mounted at optimum level. Automatic, key, or constant pressure controls available. Round, chrome plated steel handrail. Cab will not move until all gates or doors are secure and doors will not open until cab is in position. Hall stations are provided at each level. Pla

Pro Tek Handrail (Model Br 1200)

The Pro Tek Handrail, model BR 1200, is a handrail designed to assist in walking or climbing stairs. It contains a wrap around cover of embossed pebble grain rigid vinyl, and an aluminum retainer. Returns, brackets, and inside and outside corners are available. The handrail has a wall clearance of 1.5 inches. DIMENSIONS: Round 1.5 inch diameter rail.

Projected Corridor Signs

Projected Corridor Signs are access signs designed to provide maximum visibility for corridor traffic. These Setonply signs project from the walls of halls or corridors, are double-sided, and engraved with custom messages and/or symbols. Maximum length is 10 characters without a symbol, 8 characters with a symbol. Price per sign is based on the messages: $3.25 per letter (includes engraving on both sides), plus $7.85 per symbol. MOUNTING: Signs are pre-mounted on a gold or silver anodized alumin

Prolift Scl

The Prolift SCL (Standard Commercial Lift) is a fully-enclosed commercial elevator designed for use by individuals with walking or mobility disabilities or spinal cord injuries. This heavy-duty elevator can serve up to five floors and features a roped hydraulic drive system, variable speed valve, and a submersible pump and motor. This elevator is equipped with a stainless steel control panel with tactile markings and metal buttons with illuminated halos. Other standard features include four inc

Prolift Voyager

The Prolift Voyager is a commercial or home elevator designed for use by individuals with walking or mobility disabilities or spinal cord injuries. This heavy-duty elevator can be customized in a large variety of colors, sizes, finishes and other options to match its surroundings. It can serve up to five floors, and has a features a roped hydraulic drive system, variable speed valve, and a submersible pump and motor. It is equipped with a stainless steel control panel with tactile markings and m

Pu Moulded Perching Stool Tubular Back And Arms (Model 505 Pu)

The PU Moulded Perching Stool Tubular Back and Arms, model 505 PU, is an adjustable stool designed for individuals with balance or mobility disabilities. Equipped with an ergonomically designed hygienic padded seat, this stool's frame is made of high tensile steel tubing, and the back and arms are made of the same tubing and are not padded. The seat padding is made of polyurethane (PU) molded components which are non-slip and fire resistant. Other features include front and back bracing struts f

Pu Moulded Perching Stool With Padded Back (Models 503 Pu)

The PU Moulded Perching Stool with Padded Back, model 503 PU, is an adjustable stool designed for individuals with balance or mobility disabilities. Equipped with an ergonomically designed hygienic padded seat and back, this stool's frame (including the back) is made of high tensile steel tubing. The seat padding is made of polyurethane (PU) molded components which are non-slip and fire resistant. Other features include front and back bracing struts for additional strength and four rubber tipped

Pu Moulded Perching Stool With Padded Back And Padded Arms (Model 507 Pu)

The PU Moulded Perching Stool with Padded Back and Padded Arms, model 507 PU, is an adjustable stool designed for individuals with balance or mobility disabilities. Equipped with an ergonomically designed hygienic padded seat, back and arms, this stool's frame (including the back and arms) is made of high tensile steel tubing. The seat padding is made of polyurethane (PU) molded components which are non-slip and fire resistant. Other features include front and back bracing struts for additional

Pullout Sink

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To provide a custom adaptation to use a sink in a small apartment bathroom for users of wheelchairs. This adaptation uses a small RV sink, flexible pressure hose and a set of drawer runners, to be able to bring the sink out from the wall. An RV sink is shallower than a typical sink and would need to be much higher than a lap. The RV sink has a 2-inch diameter drain. The 2-inch elbow needed for under the sink may be difficult to find, but may be found

Push Pull Latch (Model Hl-6)

Door handle, aluminum or colors. Easily grasped push/pull with knurled or textured surface. Locking or latching available. Length 4 1/2 inches, diameter of pull 1 1/2 inches. 2 inches clearance from door surface. COLOR: Brass, zinc, or stainless steel finish.

Pvi Bariatric Multifold Ramp (Models Bar536, Bar636, Bar736, & Bar836)

The PVI Bariatric Multifold Ramp, models BAR536, BAR636, BAR736, and BAR836, is a portable ramp designed for use by individuals with mobility disabilities. This ramp separates into two pieces that fold on a center joint hinge. A closure strap locks the ramp panels together, allowing it to be carried like a suitcase. The ramp has an anti-slip high traction surface and durable welded construction. It accomodates wheelchairs and scooters with various wheel configurations. A safety guide indicates i

Pvi Bariatric Panel Ramp (Models Bpr348, Bpr448, Bpr548, & Bpr648)

The PVI Bariatric Panel Ramp, models BPR348, BPR448, BPR548, and BPR648, is a modular ramp designed for use by individuals with mobility disabilities. It has three interlocking lightweight ramp sections, and additional panels (not included) can be used to increase the width of the ramp. The welded ramp has an anti-slip high traction surface, and outside panels have curbing. It accomodates wheelchairs and scooters with various wheel configurations. A safety DVD and steel security pins are include

Pvi Bariatric Threshold Ramp (Models Bar1636 & Bar2436)

The PVI Bariatric Threshold Ramp, models BAR1636 and BAR2436, is designed for use to make doorways accessible to people with mobility disabilities or spinal cord injuries who use wheelchairs. Made of aluminum, these ramps have an anti-slip, high traction surface, and there are holes punched in the top corners to facilitate installations. Hardware to secure the ramp to a surface is included. DIMENSIONS (LxW) 16 x 36 inches for thresholds 1.5 to 2 inches high (BAR1636); 24 x 36 inches for threshol

Pvi Modular Ramp System

The PVI Modular Ramp System is a modular ramp deigned for use by individuals with mobility disabilities. The system can be Moved or Reconfigured, and is suitable for residential or commercial use. Made entirely of aluminum, the system is durable and weather resistant. Ramps have slip-resistant grooved aluminum floors with protective curbs and handrails. The system accommodates rises of up to 60 inches and has an adjustable slope. It can incorporate 45 degree and 90 degree turns and switchbacks.

Pvi Multifold Ramp With Extended Lip (Models Utw630, Utw730, Utw830, & Utw1030)

The PVI Multifold Ramp With Extended Lip, models UTW630, UTW730, UTW830, and UTW1030 (also known as the PVI Utility Ramp), is a portable van ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This folding ramp has an extended hook so that the top of the ramp clears the rear bumper. It separates into two pieces for folding and transport, and it is carried like a suitcase. The ramp has welded construction with an anti-slip, high traction surfa

Pvi Rubber Threshold (Models Raez0110, Raez1110, Raez1510, & Raez2100)

The PVI Rubber Threshold, models RAEZ0110, RAEZ1110, RAEZ1510 and RAEZ2100, is an accessible threshold designed for use by individuals with lower extremity, mobility or walking disabilities or spinal cord injury. Made of 100 percent recycled rubber, this threshold has a slip resistant surface, and it has no load weight limitations. It has molded miter ends, and it can be trimmed to fit a specific area with simple cutting tools. DIMENSIONS (DxW): 8.13 x 42 inches, with usable width of 36.25 inche

Quality Tub Rail

The Quality Tub Rail is a grab bar for bathtubs designed for use by individuals with balance or mobility disabilities, spinal cord injury, or arthritis. This grab bar provides a safe grip when getting in and out of the tub. DIMENSIONS: 12 or 16.5 inches high. The rail will fit tub walls from 2.75 to 6.5 inches wide.

Quick Deck

Quick-Deck is a modular ramp and deck system that provides access to homes, schools, businesses, and public buildings for wheelchair users. Ramps are available in standard, switchback, L-shaped, and custom configurations. The system can be retrofitted to existing permanent conditions to allow accessibility.

Quick Ramp Kit

The Quick Ramp System is a ramp kit designed for use by a contractor or an individual to build and install a ramp system to provide access for wheelchairs and scooters. This pre-engineered kit includes aluminum ramp components and support assemblies, stainless steel fasteners, and detailed instructions that provide Americans with Disabilities Act (ADA) guidelines, handrail options, and cut lists for the required lumber.

Quickblock Modular Ramp Support

The QuikBlock Modular Ramp Support is a ramp support foot designed for use by individuals with mobility disabilities or spinal cord injury. It is intended for use with the PVI Modular XP and PVI Modular Original System. The unit is made of high pressure plastic that is injection molded. It is equipped with a brass insert that accepts the PVI stainless steel 5/16-inch leg bolt for installation. Ascrew out plug and port allows the user to add fill sand for additional weight. The unit supports the

Quilted Plaid Incontinence Pad

The Quilted Plaid Incontinence Pad is a bed pad and incontinence pad designed for individuals with incontinence. Designed to look like an extra throw or blanket, this quilted top bed pad is made of an 80% cotton outer layer with a 20% Unique-Dri inner cores, combined with a waterproof backing. The pad provides protection for everyday household furniture. The pad can be machine washed and dried. DIMENSIONS (LxW): 36 x 34 inches. COLORS: Blue, white and pink plaid.

Quiqlite Classic

QuiqLite Classic is a hands-free battery-operated light source deigned for use by individuals with upper extremity or vision disabilities. This light clips onto any surface up to one-inch thick, including shirt pockets, robes, bed headboards, and other surfaces, to provide super-bright LED light. The unit features a 90-degree light arm, instant on/off at the touch of a button, and an automatic shut-off seven minute timer to help preserve the battery life. POWER: Uses two CR-2032 batteries (inclu

Quiqlite Ir

The Quiqlite IR is a hands-free battery-operated light source deigned for use by individuals with upper extremity or vision disabilities. This light clips onto any surface up to one-inch thick, including shirt pockets, robes, bed headboards, and other surfaces, to provide unobtrusive light. This light uses a super-bright LED and an infrared LED and has a 180-degree adjustable light arm. The unit closes flat when not in use. The first push of the on/off button activates the infrared LED, a second

R&b Blanket Cradle

R&B Blanket Cradle is designed for individuals who are restricted to bed. Its design helps to prevent feet and leg problems like cramping, pressure ulcers, and additional discomfort from the constant pressure and irritation that may be caused by bedding movement when restricted to bed. This unit is installed from the side of the bed rather than the end to provide additional strength and support.

Rabbit Sensory Habitat

The Rabbit Sensory Habitat is a room full of sensory products, deep pressure and weighted activities designed for children who are overly sensitive to or overly responsive to stimuli, to calm and soothe them. All of the packages above includes swings, lighting, and other tools, designed also to target aggressive behaviors like avoiding school work and tasks, hitting (self or others), uncontrolled energy, or withdrawn/sluggish movement. Each habitat is also highly flexible, adapts for different n

Rainy Day Indoor Playground-3 In 1 Rotary Platform Swing

The Rainy Day Indoor Playground 3 in 1 Rotary Platform Swing is a balance training device designed for use by children and adults with balance and mobility disabilities. This indoor therapy swing enables users to lay and stand in a variety of positions while attached to the support bar. The platform swing can be removed from the support bar and used independently on the floor due to its rotary design which causes the platform to rotate. Features include detachable ropes, mounted rotary base, and

Raised Toilet.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Adaptation to raise toilet instead of using a raised toilet seat. A wooden base is made to place between the toilet fixture and the floor. Extensions are needed for the pipes. The height can be custom designed but if the added height causes the user's feet to hang above the floor a foot support and be built into the base. Includes photographs. SKILLS REQUIRED: Woodworking. AUTHOR: George Washington TITLE: Raise the Toilet When It Gets Low REF: Journal

Ramp Threshold - Ada (Models 234A, 235A, & 236A)

The Ramp Threshold - ADA, models 234A, 235A, and 236A, is an accessible threshold ramp designed for use with thresholds that are too high for easy wheelchair access. The ramp is constructed of extruded aluminum. DIMENSIONS (HxL): 0.5 x 3 inches (234A), 0.25 x 3 inches (235A), or 0.5 x 3.94 inches (236A).

Ramp Up

Ramp Up is a detectable warning surface designed for use by individuals who are blind or have low vision. This pre-finished sidewalk ramp mat with truncated domes adheres to either concrete or asphalt. The unit has a low profile and zero trip point. It is surface applied, but when installed on a street corner curb ramp it gives the look of a cast in place tile . To install, place the mat in its intended position, place tape the around the mat's perimeter and remove mat, use a trowel to apply SST

Ramp.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Provides access for wheelchair riders to areas that ordinarily can only be reached by steps. Diagram and suggestions for constructing a simple ramp. SKILLS REQUIRED: Woodworking. AUTHOR: Fahland, B. TITLE: Wheelchair Selection: More Than Choosing a Chair With Wheels. REF:Book: Sister Kenny Institute, Minneapolis, MN; p 54. 1976.

Rampend Landing

The RampEnd Landing is a non-slip outdoor surface designed to provide a safe transition area at the end of a ramp for people with lower extremity or mobility disabilities, spinal cord injury, and others who use a wheelchair. This durable matting is made from recycled tires, and it can resist the damaging effects of sun, rain, and heavy foot traffic. The unit is installed by cleaning the substrate, dry fitting the unit, then glueing it into place. WARRANTY: Warranted free of any defect of materia

Rampit Aluminum Ramp

The Rampit Aluminum Ramp is a portable ramp designed for semi-permanent indoor or outdoor use to provide access for individuals with lower extremity or mobility disabilities or spinal cord injury. Made from commercial grade aluminum with stainless steel nuts and bolts, the ramp is lightweight and portable and has a no-slip surface. It has an extension for attaching to a threshold or porch. This ramp also has a swiveling bevel for smooth transition to its ground lip extension. With a platform (no

Ramps.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Ramps or portable tracks can be made using heavy duty aluminum end brackets. The extruded aluminum brackets fit on the ends of 2X8's or a custom width ramp, but the brackets must be able to fit over a 2 inch width of wood. Can be used with trucks, vans or houses. Each bracket has a 700 pound capacity (1400 pounds per set). Ramp can be up to 11 feet 7 inches in length, and up to a three foot rise. These brackets are available in hardware stores, or in m

Reach Panels (Models 135729, 135730, & 135731)

Reach Panels are wheelchair accessible activity boards designed for use on playgrounds by children ages two to twelve years who use wheelchairs. Available in three different models, these Permalene panels are friendly to the touch, height adjustable when installed at ground level, and equipped with special clamps for ease in installation. These panels may also be installed on wheelchair accessible decks (an optional curb is required). Model 135729 features a periscope and the panel moves side to

Readyvote Autokart

The ReadyVote AutoKart is an accessible cart for a voting machine designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This cart holds the AutoMark switch accessible electronic voting machine (see separate record) on a pull-out shelf, allowing full wheelchair access. While the AutoMark is held securely on one end of the cart, the other end holds an optical scanner. Because the optical scanner and AutoMark are located at opposite ends, each may be

Recessed Paper Towel Dispenser (Models B-318, B-359 & B-35903)

The Recessed Paper Towel Dispenser, models B-318, B-359 and B-35903, is a manual paper towel dispenser designed for use in public restrooms. Made of type 304 stainless steel with satin finish, this unit mounts in a rough wall opening (screws not included). The user pulls down on the paper towels that extends from the bottom of the unit to get a single paper towel. Towel size and capacity varies by model. OPTION: TowelMate allows the unit to dispense narrower towels than specified. DIMENSIONS (H

Recirculating Toilet & Electra Magic (Model 80)

Portable toilets. Sanitary, odorless. Models have waste holding tank capacity of 2.6 gallons, 4.3 gallons, or 5.5 gallons. Holding tank detaches for easy emptying. Some models have integral waste holding tank level indicator and position locking lid. Optional hold down brackets secure unit to floor. Toilets are 13 1/2 inches or 15 inches wide; 15 inches or 16 1/2 inches long; 12 inches, 13 inches, 14 5/8 inches, or 16 1/4 inches high. Electra Magic Model 80 is a recirculating portable toilet; pr

Redimat

RediMat is a detectable warning surface designed for use to provide a tactile warning of traffic and other dangers for individuals who are blind or have low vision. This flexible urethane mat with pre-applied adhesive can be nstalled on asphalt or concrete. The adhesive has a protective backing that is peeled off before installation. The flexibility of the polyurethane material enables it to conform to uneven surfaces. The mat comes in inline, offset, or wedge configuration, with a beveled edge

Reeded Grab Bar

The Reeded Grab Bar is a ridged wall-mounted grab bar disigned for use by individuals with balance or mobility disabilities or spinal cord injury. These bars have ridges to aid in grasping, and attach to the wall at two points (for lengths below 36 inches) or three points (for lengths 36 inches or longer). DIMENSIONS: 12, 16, 24, 32, 36, 42, 48, or 60 inches long. COLORS: Available finishes include antique brass, polished brass, polished nickel, satin chrome, satin nickel, satin brass, satin go

Refresh Walk-In Shower

The Refresh Walk-in Shower is a roll in shower stall with built-in grab bars and seat designed to be accessible to wheelchair users and individuals with lower extremity or mobility disabilities or spinal cord injury. This low-entry shower has bi-fold shower doors that open 180 degrees, providing barrier-free access across the width of the shower. The half-height folding doors have tempered raindrop pattern panels that cover the shower opening when closed yet provide full access to the shower whe

Regal Hydraulic Drive Home Elevator

The Regal Hydraulic Drive Home Elevator is a home elevator designed for use by individuals with mobility disabilities. It has a roped hydraulic drive with a nominal operating speed of 40 feet per minute, programmable solid state controls, an A-style prewired Sierra cab, emergency lowering and lighting, two to five stops with up to 50 feet of travel, and a separate machine room, which can be located adjacent to the shaftway or in a remote location on any floor. POWER: Uses household current with

Reinforced Bed With Enclosure

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom-made bed for a child with Angelman syndrome to provide a safe and protected environment during sleep and periods of restlessness. The child had outgrown her previous modified cot and the new bed was needed to withstand the strenuous shaking the child applied during her periods of sleeplessness. The new design involved moving the child to a single mattress and building safety railings high enough so that she cannot climb over them a

Reinforced Chair

CUSTOM ADAPTATION PURPOSE: To provide seating for a child with multiple disabilities, including cerebral palsy and intellectual disabilities, who rocked when seated. The chair needed to be strong enough to be difficult to rock and to be able to withstand any rocking motion generated while providing the needed positioning for eating and other activities. The chair base and frame were made of solid Tasmanian oak, with joints that are both screwed and glued. The seat, back, and base covering were

Reizen Ii Low Vision Floor Lamp

The Reizen II Low Vision Floor Lamp is a low vision light designed for use by persons with low vision and upper extremity disabilities. This lamp has a flexible arm and adjustable head that allows the user to focus the light from its energy-efficient bulb in order to reduce glare. It is turned on and off with a palm switch, which is easier for persons with arthritis and other upper extremity disabilities to use. DIMENSIONS: 49 inches tall with the head bent in standard use position.

Reizen Talking Alarm Clock With Time And Temperature

The Reizen Talking Alarm Clock with Time and Temperature is a voice output alarm clock designed for use by individuals who are blind or who have low vision and people with upper extremity, fine motor and neurological. This clock has a liquid crystal display (LCD) and a voice announcement of the time and temperature on demand and hourly. The hourly announcement can occur throughout the day or for only 16 hours each day (7 am to 10 pm). The announcement can be activated by a soft touch on the top

Relax Right Neck Pillow (Model 71000)

The Relax Right Neck Pillow, model 71000, is a cervical pillow designed for use by individuals with neck pain, injury or stiffness. Made of thermo-sensitive memory foam, this U-shaped pillow is designed to relax and support the neck while in a seated position during travel or while reading in bed. It has an antimicrobial velour cover that is machine washable. DIMENSIONS (HxLxW): 3 x 11 x 12 inches. COLOR: Blue

Relax The Back Footrest

The Relax The Back Footrest is a footstool designed for use by individuals with lower extremity or circulatory disabilities or back pain. Designed to accommodate all heights, this adjustable unit provides a gentle rocking motion to stimulate lower body circulation. Tall and standard heights are available.

Relume Led Pedestrian Signal

The Relume LED Pedestrian Signal is a voice output and vibrating pedestrian signal system designed for use by pedestrians who are blind or have low vision. This pedestrian signal provides voice and vibrating output through the Vibro-Tactile Orientation and Mobility Unit, a remote receiver carried by individual pedestrians. The signal features a light emitting diode (LED) display with pulse mode operation. A walking figure represents "walk" and a hand represents "don't walk." The display is dimme

Remote Control Light Switch (Model 351928)

The Remote Control Light Switch, model 351928, is a lighting control system designed for use by individuals with mobility or upper extremity disabilities. This system consists of a wireless remote control double rocker switch and two receivers that plug into standard outlets. One receiver takes a 3-prong plug, the other a 2-prong polarized plug. Plugging a lamp, coffeemaker, or other small appliance (up to 300 watts) into the receiver enables the user to operate the device by flipping the remote

Remote Control Outlet (Set Of 3)

The Remote Control Outlet (Set of 3) is a lighting control system designed for use by individuals with mobility or fine motor disabilities. This system is useful for operating small electrical appliances such as lamps, etc. for instant light at night, or where the electric plug socket is located in a difficult to reach place. It works on virtually any electrical device that can be plugged into a standard outlet. This set includes three plug-in receivers and two hand-held remote controls. With a

Remote Door Lock

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with limited mobility to lock and unlock an entry door remotely. A door-lock solenoid from a car was mated to a standard dead-bolt. Power was connected through a momentary contact, center-off, double- throw switch that was wired to reverse the power polarity as it was moved up/down. This operated the solenoid in both directions. The switch was placed in box that was placed beside bed. The car-lock solenoid can be operated manually if need

Remote Elevator Control

CUSTOMIZED ADAPTATION --- PURPOSE: To create a remote control for a school elevator for a student with mobility disabilities. In order to keep the general school population from using the elevator, a security lock was installed. The student’s disability prevented him from using the key to that lock, preventing him from using the elevator. A customized adaptation was created using a battery-operated radio remote switch which was installed to bypass both the security switch and the call button. Pu

Remote Holder 2

DO IT YOURSELF ENTRY --- PURPOSE: To enablke an individual with only limited use of one arm to open her apartment door using a remote control while in bed. Because simply setting the remote on the bed would allow it to fall or slide out of reach, a holder was required that could be attached to the top bedcover and from which the remote can be easily removed for use during the daytime. The holder also needed to be easy to install and remove and be able to withstand frequent dropping as it would

Renaissance Residential Elevator

The Renaissance Residential Elevator is a home elevator designed for use by individuals with walking, mobility or lower extremity disabilities or arthritis and others who use wheelchairs or have difficulty walking up or down stairs. This luxury elevator has an array of interior panel finishing choices to help the user create a custom look. The elevator's soft start and stop enhances overall ride quality and comfort. Fixtures are available in stainless steel, brass or bronze finishes. The Renaiss

Replacement Shower Seat

CUSTOM ADAPTATION PURPOSE: To enable an individual with spina bifida to shower independently. An existing shower seat had been custom built and mounted to the side wall of the shower at a slight angle to promote damage. The unit had a wooden seat covered with plastic, but over time water had penetrated the wood, causing it to rot and eventually break. A new seat base was made from 12 millimeter high-density polyethylene with rounded corners. Glued to the base was a sheet of closed-cell foam to

Residential Liftavator

The Residential Liftavator is a home elevator designed for use by individuals with mobility or walking disabilities. This elevator provies service up to 50 feet in new and existing residences. The elevator is installed in a completely enclosed fire-rated hoistway. Doors and gates are fully interlocked for safety. Features include a commercial hydraulic cylinder power unit; automatic or key control; carpet flooring; illuminated push buttons; emergency ligting; solid panel aluminum, stainless, or

Residential Vertical Lift

The Residential Verical Lift is a home elevator designed for use by wheelchair users and individuals with balance, lower extremity, or mobility disabilities. This elevator comes fully assembled and can be used indoors or outdoors. It can be disassembled into three components (the legs, the carrier, and the tower) for installation in a house with narrow doorways. It has an alternating current (AC) motor with a screw drive; keyed, constant pressure controls and emergency stop; weather-resistant sw

Residential Vertical Lift Junior

Residential Vertical Lift Junior is a home elevator designed for use by wheelchair users or individuals with balance, lower extremity, or mobility disabilities or arthritis. It has an expanded metal platform with a tubular platform wall; an alternating current (AC) motor with screw drive; keyed, constant pressure controls; an emergency stop; and top and bottom limit switches. Switches and controls are weather resistant. The elevator comes fully assembled but can be disassembled for inside instal

Residential Vertical Lift Xl

The Residential Vertical Platform Lift XL is a home elevator designed for use by wheelchair users or individuals with balance, lower extremity, or mobility disabilities or arthritis. The elevator has an expanded metal platform with straight-through access and full visibility under the platform. It has a screw drive with soft touch control pads and a keyed emergency stop. POWER: Uses 110-volt alternating current (AC) wall outlet. Optional 24-volt direct current (DC) battery backup is available. O

Rest-Q Mattress

The Rest-Q Mattress is a therapeutic foam mattress designed for use by individuals in need of pressure relief, pain management, and wound care. The mattress features a waterproof top cover, a resilient layer of pressure reduction cushioning material that covers the complete surface, a soft strip of pressure relief polymer for hips and shoulders, and a lateral support section that provides full-length body support along the spine. The mattress is also equipped with side handles to aid transfers i

Restease Adjustable Foot Rest (Model 2120Bl)

The RestEase Adjustable Footrest, model 2120BL, is a footstool designed for use to help reduce leg and back pressure and improve posture and circulation while sitting. This height adjustable footrest has four angle adjustements and tilts from 6 to 25 degrees. It is made of high impact polystyrene plastic with an integrated anti-slip rubber mat. DIMENSIONS (HxDxW): 3.25 to 5 x 13.75 to 14.75 x 15.5 inches. WEIGHT: 3 pounds. COLOR: Black with silver accents.

Restroom Sign With Braille (Girls & Boys) (Models Rre-140 & Rre-160)

The Restroom Sign with Braille, models RRE-140 and RRE-160, is a braille and tactile sign designed for use by children who use wheelchairs or who are blind or have low vision. This sign identifies a wheelchair accessible restroom while providing tactile and Brade II braille information for individuals with visual disabilities. The sign comes in versions for girls' (RRE-140) and boys' (model RRE-160) restrooms. The girls' version features two line drawings, an image of a girl on the left and an A

Restroom Sign With Braille (Women & Men) (Models Rre-130 & Rre-150)

The Restroom Sign with Braille, models RRE-130 and RRE-150, is a braille and tactile sign designed for use by individuals who use wheelchairs or who are blind or have low vision. This sign identifies a wheelchair accessible restroom while providing tactile and Brade II braille information for individuals with visual disabilities. The sign comes in versions for women's (model RRE-130) and men's (RRE-150) restrooms. The women's version features two line drawings, an image of a woman on the left an

Restroom Signs

The Restroom Signs are braille and tactile signs designed for use to mark public restrooms in a way that can be read by individuals who are blind or have low vision. Each sign has tactile raised letters and symbols with Grade II Braille. Signs are rectangular, circular, or triangular in shape, with the words 'MEN," "WOMEN," "RESTROOM," "BOYS," or "GIRLS." Signs for men's or women's restrooms include a stylized male or female figure with or without a wheelchair access symbol. Unisex signs have th

Restroom Stall Partition.

Accessible restroom stall partitions, 34 inch door with 38 inch wide stall, 36 inch door with 60 inch wide stall. Outswinging door optional, latching device easily grasped. Mounts to ceiling or floor. Optional steel/enamel, plastic laminate/particleboard core, plastic laminate/ solid phenolic core, stainless steel material composition. Depth of stall is optional, 54 inch high optional coat hook and optional partitions reinforced for grab bars.

Retractable Shower Seat (Models 703 & 703T)

Wall mounted stainless steel shower seat with tubular frame, 2 legs angle into wall for rigid support. When seat is retracted, legs fold against wall. Teakwood seats or Naugahyde covered foam cushion. Seat dimensions are 14 inches by 16 inches. Seat height is 19 inches.

Retrofit Lever (Model 04-032)

The Retrofit Lever, model 04-032, is a lever door handle that converts D series Orbit, Plymouth, and Tulip design knob locks into lever handle locks. Conversion can be made without removing the lock from the door. Black, engineering grade resin designed for high usage on all standard door installations. Lever returns to within one half inch of face on 1 3/4 inch doors. Converts both keyed and non-keyed D series locks.

Ribbed Grab Bar

The Ribbed Grab Bar is a wall grab bar designed for use in the bathtub or shower by individuals with balance or mobility disabilities. Constructed of durable ribbed plastic for a non-slip grip, the unit consists of a center bar, two end brackets with closure plugs, and mounting screws. The end caps can be removed to enable additional lengths to be added in a continuous straight line. DIMENSIONS: Available in 16 inches long to accommodate standard wall stud spacing or in 24 inches long. The wall

Rifton Stationary Chair Large (Model R613)

The Rifton Stationary Chair, model R613, is a positioning chair designed for individuals 53 to 72 inches tall with mild physical or neurological disabilities. Intended for individuals who can walk with assistance and do not need a chair on wheels, this chair enables the child to sit properly positioned with feet on the floor (or with the footboard at floor level). The Stationary Chair comes with the chair frame, and a choice of the low backrest with armrests and pads or the high backrest with ar

Rifton Stationary Chair Medium (Model R612)

The Rifton Stationary Chair Medium, model R612, is a youth positioning chair designed for use by individuals 42 to 55 inches tall with mild physical or neurological disabilities. Intended for individuals who can walk with assistance and do not need a chair on wheels, this chair enables the child to sit properly positioned with feet on the floor (or with the footboard at floor level). The Stationary Chair comes with the chair frame, and a choice of a low backrest with armrests and pads or a high

Rifton Stationary Chair Small (Model R611)

The Rifton Stationary Chair Small, model R611, is a youth positioning chair designed for children 36 to 46 inches tall with mild physical or neurological disabilities. Intended for children who can walk with assistance and do not need a chair on wheels, this chair enables the child to sit properly positioned with feet on the floor (or with the footboard at floor level). The Stationary Chair comes with the chair frame and backrest with armrests and pads. The seat depth is adjustable, and there is

Right / Left Reversible Handrail (Models Rt124, Rt126, & Rt128)

The Right/Left Reversible Handrail is a wall grab bar designed for use in bathrooms by individuals with balance, lower extremity, or mobility disabilities. The hand rail has veritcal and horizontal bars, and is right/left reversible. DIMENSIONS (HxW): 762 x 475 millimeters (model RT124); 762 x 762 millimeters (model RT126); or 762 x 1200 millimeters (model RT128). COLORS: White, red, dark blue, gray, or turquoise.

Robohandle

The RoboHandle® is a handle extender for use by adults with carpal tunnel syndrome or other repetitive motion injuries, disabilities of the wrist or hand, or limited range of motion. The RoboHandle® attaches to a broom or rake type handle to help absorb the torque which reduces the potential for operator injury to arm, wrist, or hand.

Robotic Bed

---- PROTOTYPE --------- PURPOSE: Panasonic has created a prototype robotic bed which transforms into a wheelchair allowing the elderly or individuals with disabilities to get up without assistance. The user remains in the bed while the bed turns into a wheelchair. The conversion to a wheelchair involves half of the mattress rising and half lowering while a motorized unit beneath it automatically slides out from the bed. While in chair mode, the robot can detect people and obstacles and assist u

Robotic Locker Opener

---- PROTOTYPE --------- PURPOSE: To create a powered, remotely operated door opener for a high school locker for a student with muscular dystrophy. A pair of seniors, Micah Stuhldreher and Wyatt Smrcka, in a robotics class at Pinckney Community High School in Michigan used their school's resources to build a device that allows their classmate with muscular dystrophy to open his locker using a remote control from his wheelchair. Working with their robotics teacher, they fabricated moving parts a

Roby Powered Stair Climber

The Roby Powered Stair Climber is an interior or exterior wheelchair lift designed for use by individuals with mobility disabilities or spinal cord injury. This portable unit transports wheelchair users up or down straight stairways with a maximum angle of 35 degrees or turnback stairways with flat intermediate landings. The lift adapts to most adult or pediatric manual wheelchairs. It can ascend approximately 23 floors fully loaded on a single battery charge. Safety features include a built-in

Rock & Roll Mobile Rocking Chair

The Rock & Roll Mobile Rocking Chair is a rocking chair with a seating system and transport wheelchair designed to for use by adults with with balance, lower extremity, mobility or walking disabilities and others who cannot stand for long periods of time and must sit for significant periods. FRAME (LxW): 32.28 x 21.65 inches. The rocking mechanism of the Rock & Roll chair can be activated by the user or an attendant, and it is intended to alternate pressure points to reduce the risk of d

Rohl Decorative Grab Bar (Models 1250 & 1252)

The Rohl Decorative Grab Bar is a wall grab bar designed for use by individuals with balance or mobility disabilities. These solid brass grab bars have a country bath escutcheon design. Mounting hardware is included. DIMENSIONS: Model 1250 is 38.56 inches long with a center length of 36 inches. Model 1252 is 20.53 inches long with a center length of 18 inches. Both models extend 3.75 inches from the wall and have an escutcheon diameter of 2.56 inches. COLOR: Polished chrome, polished nickel, sat

Rohl Single-Function Handshower / Hose / Bar / Outlet (Models 1300 & 1301)

The Rohl Single-Function Handshower/Hose/Bar/ Outlet is a handshower with a flexible hose designed for use by individuals with mobility, lower extremity,or balance disabilities. Model 1300 is a package that includes a model 1100/8 porcelain handle handshower and a model 1200 shower bar with a porcelain cap cross handle. Model 1301 is a package that includes a model 1101/8 metal handle handshower and a model 1201 shower bar with metal cap cross handle. Both packages include a model 16295 hose and

Roll In Shower In Existing Tub Space.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Provides waterproof pan on floor with minimal lip to impede wheelchair or person walking. Modification procedure: 1) Remove existing bathtub. 2) Paint floor with a concrete adhesive. 3) Form wire cloth frame on floor and 4 inches up on side walls and attach to threshold. 4) Form studwall (36 inches) and 1 by 6 inch maple threshold 36 inches wide at the door. 5) Pour concrete patch base over wire cloth, shaping it for form and drainage considerations (4

Roll-A-Ramp

Roll-A-Ramp is a portable ramp designed to provide wheelchair and scooter access to homes, buildings, or vans. Made of anodized aerospace aluminum, these ramps are available in a two-track style or in a single wider ramp to accommodate scooters and powered wheelchairs and feature built-in side rails for safety. The width is adjustable to accommodate a variety of wheelchairs and scooters. Each lightweight section rolls up or folds for transport and storage and includes a carrying strap/handle. Th

Roll-A-Ramp Handrails

The Roll-A-Ramp Handrail is a handrail for portable ramp designed for use by individuals with balance, mobility, or walking disabilities. This handrail is designed to install on a Roll-A-Ramp portable ramp (see separate entry). Three brackets hook onto one edge of the ramp, and the vertical poles of the handrail fit into the brackets and are secured with one bolt. To remove the handrail, the single bolt is loosened and the rails are lifted out of the brackets. The handrail can be installed and r

Roll-O-Ramp With Wheels (Model D-Rol-48)

Roll-O-Ramp With Wheels, model D-ROL-48, is a portable curb ramp designed for use by individuals in wheelchairs. This ramp has wheels for portabililty. Its beveled edges create a smooth transition between the ramp and the ground or sidewalk. DIMENSIONS (LxW): 48 x 36 inches. CAPACITY: 500 pounds. WEIGHT: 97 pounds.

Roll-Out Shelves By Shelf Improvement

Roll-Out Shelves by Shelf Improvement are cabinet organizers designed for use by individuals with mobility disabilities. Designed to provide full cabinet accessibility in the kitchen, bathroom, or laundry, these shelves roll out of the cabinet to provide access to the contents. Each shelf is pre-assembled and attached to an installation platform with a specially-designed one-piece track. The unit is installed by attaching the platform to the cabinet floor using four screws. The shelves are made

Rolling 3 Leg Stool (Model 20H014A)

The Rolling 3 Leg Stool, model 20H014A, is a caster stool designed for use by seniors or individuals with balance or mobility disabilities or arthritis. This lightweight, three-legged stool has fully rotating, non-locking casters and a padded seat. Designed for working at a near standing position, the stool supports 90 percent of body weight while allowing the user to move around in small work areas. It can be used in kitchens, workshops, or bathrooms. DIMENSIONS: Seat height is adjustable from

Roth Mobeli Bath Tub Shortener (Models 14005206 & 14005207)

The Roth Mobeli Bath Tub Shortener is a bathtub shortener designed for use by individuals with short stature or lower extremity amputation. This unit can be placed at any point in the tub to provide foot support, or it can be turned horizontally to function as a tray. Model 14005206 has two suction plates and can fit all bathtub types. Model 14005207 has three adjustable clip-on suction plates and can only be used in parallel bathtubs. The suction plates arranaged with two plates above, which sw

Rubber Doorknob Extension (Model 6393)

The Rubber Doorknob Extension, model 6393, is a door handle lever designed to assist individuals with limited manual grasping ability. The handle's soft rubber molding snaps over the doorknob, providing leverage to turn the knob. Fits knobs 2 to 2.5 inches in diameter. Latex free. DIMENSIONS: The handle is 2.5 inches long.

Rubber Stair Treads (Model Gs622)

Rubber Stair Treads, model GS622, are non-slip stair treads designed for use by individuals with balance or mobility disabilities or low vision. The rubber tread has a diamond safety design and 2 long wearing mineral-coated Grit Strips recessed the full length of the tread at impact area. Treads have an adjustable square nose or a curved nose. OPTIONS: Extra wide grit strip for users with low vision. DIMENSIONS: Tread is 0.25 inches thick, 12.25 inches deep, and 36, 42, 48, 54, 60, or 72 inches

Rubber Threshold Ramp

The Rubber Threshold Ramp is an accessible threshold designed to provide wheelchair or scooter access in entryways. To provide a smooth and secure transition, the ramp is positioned against the door threshold. The rubber can be trimmed to fit the doorway, and ramps can be stacked for higher rises. DIMENSIONS (HxLxW): 1.5 x 14 x 36 inches, 2.5 x 24 x 48 inches, or 4.75 x 48 x 48 inches. CAPACITY: 850 pounds. WEIGHT: 18 pounds (1.5 inch rise), 40 pounds (2.5 inch rise), or 127 pounds (4.75 inch ri

Saddle Threshold (Model 713)

The Saddle Threshold, model 713, is a threshold ramp designed for use by people with mobility, lower extremity or walking disability. This door threshold is available with an aluminum, bronze, or stainless steel finish. It has a non-skid surface and is available with an abrasive coating. DIMENSIONS (HxW): O.3125 x 4.5 or 7 inches. Typical wall (top plate) 0.125 inch, CAPACITY: 0.74 pounds per foot at 5 inches to 1.01 pounds per foot at 7 inches.

Saddle Threshold (Model Cr3715)

The Saddle Threshold, model CR3715, is a threshold ramp designed for use to make carpet transitions accessible to wheelchair users. This heavy duty and durable threshold is available with a mill finish. The unit is drilled for screws (Included). DIMENSIONS (HxLxW): 0.25 x 36 x 5, 0.25 x 48 x 5, 0.25 x 72 x 5, or 0.25 x 96 x 5 inches. COLOR: Aluminum or dark bronze.

Saddle Threshold 1 (Models 401S, 402S, 403S, & 404S)

The Saddle Threshold 1 is a threshold ramp designed to provide wheelchair access in doorways. The mill finish bronze and stainless steel thresholds have a smooth surface; aluminum thresholds have a fluted surface. The threshold comes with ten 1.5-inch wood screws. OPTIONS: Sure-Step non-slip abrasive coating; other screw types and anchors. DIMENSIONS (HxW): 0.31 x 2.5 inches (model 401S); 0.5 x 3 inches (model 402S); 0.25 x 4 inches (model 403S); 0.5 x 4 inches (model 404S). COLOR: Available in

Safe Guard Playground System

The Safe Guard Playground System is a rubber mat and ground retention grid designed to help eliminate injuries due to falls on playgrounds and to provide an accessible surface for individuals with disabilities. The seamless surface is a blend of rubber granules and polyurethane binder that is poured into place, allowing it to be molded into a variety of shapes and thicknesses. It may be installed over properly prepared hard surfaces such as asphalt, concrete, wood, tile, or brick, as well as loo

Safe Hands Bathtub (Model Was-888)

The Safe Hands Bathtub, model WAS-888, is a walk-in bathtub designed for use by individuals with balance or mobility disabilities or arthritis. This walk-in tub has a waterproof door, a seat, a retractable hand shower, and four adjustable water jets for hydrotherapy massage. The tub fits one adult, and is deep enough to allow the user's entire body to be submerged while sitting down. POWER: Uses 110/120 volts. OPTIONS: 8 water jets, add $499; heated blower with 20 air jets, add $999; custom colo

Safe Step Walk-In Shower

The Safe Step Walk-In Shower is an accessible shower stall with built-in seat and grab bar designed for use by individuals with balance, lower extremity or mobility disabilities. This shower has a 4-inch entry step and a built-in folding safety chair with armrests. Both the seat and armrests have extra thick pads. The Safe Step Walk-In Shower features a built-in vertical safety grab bar adjacent to the seat; extra thick, commercial grade anti-slip safety flooring; Delta dual showers, including a

Safe Step Walk-In Tub

The Safe Step Walk-In Tub is a walk-in bathtub and hydrotherapy bath designed for use by individuals with mobility, lower extremity or balance disabilities or arthritis. Designed to fit most bathrooms, this tub features a guaranteed leak-free design; a low-level entry; a wide access door with a No Strength Locking handle (right and left side available); anti-scald technology; a slip-resistant ComfortSeat and floor; bacteria- and mold-resistant sanitary gel-coat; built-in and wall mount safety ba

Safe-T-First Rubber Wall Base

The Safe-T-First Rubber Wall Base is a detectable orientation surface designed for use by individuals with low vision. The glow strip rubber wall base covers the bottom edge of the wall and acts as a transition between the wall and the floor. It is co-extruded with a strip of luminous Permalight photoluminescent material. In emergencies such as fires, it can indicate a continuous uninterrupted pathway to safety. Its low location is advantageous in a fire emergency, since the safest place to be d

Safegard Door Closer (Series 2200 & 2300)

Electronic door closer provides door control for single or double smoke and fire barrier doors. Holds door open under normal conditions providing unobstructed traffic flow. Closes door automatically in a smoke or fire emergency. Does not require the use of hands to clsoe door.

Safer Shower Experience

The Safer Shower Experience is a roll-in shower designed for use by individuals who use wheelchairs. It has a flexible water barrier and removable rubber ramp that allow a wheelchair to roll directly into the shower stall, where the user can transfer to the drop-down, fold-away bench. Other features include multiple shower settings, two shower heads (hand-held and stationary), four grab bars, chrome hardware, temperature safety valves, and a cushioned drop-down seat.

Safeshower Transitions

SafeShower Transitions are shower ramps designed to make shower stalls accessible to individuals with mobility or lower extremity disabilities or spinal cord injury and others who use wheelchairs. These ramps can be installed with silicone adhesive for a permanent application or with double-back tape for less permanent applications. They have a slip resistant surface and are made of composite plastic that is not absorbent. SafeShower transitions come with a built-in side approach, or they can be

Safespan Telescoping Ramp (Model D-Tr-88)

The Safespan Telescoping Ramp, model D-TR-88, is a pair of telescoping tracks designed to provide access for wheelchair users. Tracks are made using a lightweight aluminum extrusion. The top surface is serrated for positive traction. Each track has one carrying handle. DIMENSIONS (LxW): 88 x 7 7/8 inches. CAPACITY: 550 pounds. WEIGHT: 65 pounds per pair.

Safetemp Ii Pressure Balance Valve (Model Gs-105)

The Safetemp II Pressure Balance Valve, model GS-105, is a temperature control valve that maintains shower or bath water temperatures within a comfort zone by equalizing hot and cold water pressure. This is a washerless rough-in valve with maintenance stops, made of rough brass. WARRANTY: Limited lifetime warranty.

Safety Armrest (Model 6287)

The Safety Armrest, model 6287, is an anodized aluminum safety frame designed for those who need extra support when using the toilet. The armrest installs between the seat and the bowl and plastic sleeves prevent marring of the bowl; there are no floor supports. The frame pivots up for cleaning. The armrest raises the toilet seat by 1 inch. DIMENSIONS: Armrest height is 12 inches above the bowl; the width between arms is 18 1/2 inches.

Safety Bath Serenity Walk In Bathtub

The Safety Bath Serenity Walk In Bathtub is a bathtub designed for use by individuals with walking or balance disabilities. This fiberglass tub features a wide, outward-swinging door in the side with a low entry step to enable the user to enter the tub without climbing over the side. The door is available in a choice of right or left opening. Standard equipment includes an integral molded seat and a removable booster seat, trim boards, grab bar on the door, pop up drain with waste overflow, and

Safety Bath Stretch Walk-In Bathtub

The Safety Bath Stretch Walk In Bathtub is a bathtub designed for use by individuals with walking or balance disabilities. This fiberglass tub features a wide, outward-swinging door in the side with a low entry step to enable the user to enter the tub without climbing over the side. The door is available in a choice of right or left opening. Standard equipment includes an integral molded seat, trim boards, grab bar on the door, pop up drain with waste overflow, and external drain kit. OPTIONS: F

Safety Bath Supreme Institutional Bathtub

The Safety Bath Supreme Institutional Bathtub is designed for use in assisted living facilities. This walk-in tub is designed to eliminate the risk of infectious bacteria for multiple bathtub users. This tub features a specially-designed air system, the San-Air Whirlpool System, which prohibits bacteria from entering the whirlpool system. Additional features include hot air purge to remove moisture at the whirlpool jet tips and a cleaning system that sanitizes the surfaces of the bathtub after u

Safety Deck Ii Mat

The Safety Deck II Mat is an accessible lawn or playground surface designed for use by children or adults in wheelchairs. The surface consists of a grid made from recycled rubber tires/PVC. Grass pokes through the holes in the grid, creating a clean, natural grass playground or lawn with wheelchair access, while protecting the grass roots. The surface has its own drainage system, making it ready for play immediately after rain or watering. It can be disassembled and reinstalled in another locati

Safety Dot

---- PROTOTYPE --------- PURPOSE: To design a prototype of a set of Braille labels that are mounted on public handrails to allow individuals with visual disabilities to safely and easily navigate stairs. Even with a guide cane in hand it can be difficult to negotiate a flight of stairs solely on instinct. The Safety Dot is a set of metallic Braille labels mounted on a handrail that inform the user of the number of steps remaining on the stairway. TITLE: Handrails That Speak. WEBSITE: Yanko Desig

Safety First High Profile Tub Bar (Model Sf580)

The Safety First High Profile Tub Bar, model SF580, is a bathtub grab bar designed for use by individuals with balance or mobility disabilities. The bars are made of tubing with a grooved surface to aid in gripping, and come with adjustable mounting clamps with neoprene pads to protect tub walls. The bar is higher for use by taller individuals. DIMENSIONS (HxW): 15 x 7.25 inchess, with 1 inch diameter tubing. Mounting clamps fit tub walls 3.75 to 5.75 inches wide. COLOR: White.

Safety First Low Profile Tub Bar (Model Sf590)

The Safety First Low Profile Tub Bar, model SF590, is a bathtub grab bar designed for use by individuals with balance or mobility disabilities. Bars have a grooved surface for secure gripping. Adjustable mounting clamps have neoprene pads to protect tub walls. DIMENSIONS (HxW): 6 x 17.25 inches with 1 inch diameter tubing. Mounting clamps fit tub walls 3.75 to 5.75 inches wide. COLOR: White.

Safety First Multi-Grip Tub Bar (Model Sf585)

The Safety First Multi-Grip Tub Bar, model SF585, is a bathtub grab bar designed for use by individuals with balance or mobility disabilities. This portable grab bar has a higher horizontal bar on one side and a lower horizontal bar on the other side, providing two levels to hold onto when getting in and out of the tub. Bars are made of plastic tubing with a grooved surface for gripping, and come with adjustable mounting clamps with neoprene pads to protect tub walls. DIMENSIONS: Two 8-inch long

Safety Frame

The Safety Frame is an aluminum safety frame that attaches to the hinge of a toilet seat. The feet have plastic tips on them. DIMENSIONS (WxH): 18 x 27 inches.

Safety Guardrails (Model 6336)

Safety Guardrails, model 6336, are adjustable safety frames designed to provide extra support for individuals when using the toilet. The unit installs between the seat and the bowl. Either or both arms may be removed by push button locks. The legs have plastic tips to protect the floor. DIMENSIONS: Height adjusts from 15 to 20 inches; width adjusts from 17 to 20 inches.

Safety In The Bathroom

DO IT YOURSELF ENTRYPURPOSE: To make bathroom use safer for seniors and individuals with mobility, walking, or balance disabilities. This article, part of the chapter entitled "Bathroom & Washing Up," dicusses ways to provide greater bathroom safety, including using non-slip surfaces in the tub or shower and on the bathroom floor; installing grab bars; ensuring adequate lighting; and having ground-fault-interrupted (GFI) outlets in the bathroom. AUTHOR: Greenstein, D. TITLE: Bathroom Safety.

Safety Sleeper

The Safety Sleeper is an enclosed bed designed for use by children with autism, behavior disorders or sleep disorders such as sleepwalking that cause wandering. This bed's frame is made of aluminum and stainless steel and consists of six sections which slide together and lock in place. The top connects to the base with pull pins. It is fully self-supportive, and the assembly requires no additional hardware. A screen covering covers all four sides and and the top of the bed and has a zipper openi

Safety Track

Safety Track is non-slip floor covering and anti-skid tape designed to reduce the risk of falls by individuals with balance or walking disabilities. The material provides traction on interior ramps, ladders and walkways. It adheres to clean, dry surfaces including wood, metal or concrete. The material is applied by peeling off its backing and pressing it onto the surface. The material comes in strips of various widths, which can be cut to the required length. DIMENSIONS (LxW): 60 feet x 4, 6, 1

Safety Tread (Model 16H158)

The Safety Tread, model 16H158, is a safety tread and non-slip floor covering designed for use by individuals with balance or mobility disabilities. Designed to reduce the risk of slip, trips and falls, this slip resistant tread strip is made of sandpaper-like material to provide safer footing around a house, cottage, car and outdoors. The strip can be cut and sized to be placed on slippery steps, stairs, wheelchair footrests, and poolside or in the bathroom. DIMENSIONS (LxW): 60 x 2 inches.

Safety Tred Ii Mat

The Safety Tred II Mat is a non-slip floor covering designed for use by individuals with balance, mobility, or walking disabilities. This surface material can be used on ramps or in hallways, entranceways, kitchens, and walkways. The mats form an interlocking system, with each mat having five lugs that effectively lock one to another. Made of recycled polyvinyl chloride or recycled rubber with UV protection (rubber content in black mats only), the mat is designed to be cut with a sharp saw or ji

Safeway Step

The Safeway Step is a bathtub insert designed to convert a tub into a walk-in bathtub for use by individuals with balance, lower extremity, or mobility disabilities or arthritis. The unit is installed by cutting a section of the existing tub and custom fitting the resulting opening. The unit can be installed in most types of bathtubs, including fiberglass, steel, or cast iron. The insert provides easier access into the bath/shower area.

Safti Strobe

The Safti Strobe is a indoor/outdoor strobe light designed to be connected to emergency or security systems for people with disabilities. It can be mounted to any surface. The Safti Strobe flashes 60 to 90 times per minute at rated voltage, and is able to run on emergency power for prolonged periods of time. POWER: Models are designed for 6 or 12 volt battery operation, or for 120 volt AC operation.

Safti-Trax

The SAFTI-TRAX Detectable Warning System is a detectable warning surface designed for compliance with the Americans with Disabilities Act (ADA) requirement for a tactile warning system for individuals who are blind or visually impaired. This system incorporates resilient rubber domes with an overcoating of DURABAK, a one-part, non-slip, flexible polyurethane safety coating. It is a permanent system that is applied directly to clean dry surfaces without needing specialized labor or machinery. No

Sanctuary Walk In Bath

The Sanctuary Walk In Bath is an accessible bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. This tub fits most standard tub footprints, and is abailable configured to fit in a corner or with its back to the wall. It has an extra wide, Low-level entry with an inward opening, self-sealing door with a closing mechanism that can be operated while standing or sitting. It comes with either a left-or right-hand door opening. Other features include Tem

Sandbox (Model 9835)

The Sand Box, no. 9835, is a round, elevated sand table that is accessible to children in wheelchairs. The Sand Box is designed for outdoor use. DIMENSIONS: 5 or 6 foot diameter; 3 feet high. WARRANTY: 1-year on materials and workmanship.

Saturn Square Ada Picnic Table (Model T46Ebperf3P)

The Saturn Square ADA Picnic Table, model T46EBPERF3P, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. The table has benches on three sides with space for a wheelchair on the fourth side. The table has a high-gloss surface with smooth rolled edges and an umbrella hole in the center. It is made from 11-gauge punched steel with a plastic-coated top and seats. DIMENSIONS (HxLxW): 18 x 46 x 46 inches. The seats are 38 inches long by 12 i

Savaria Vertical Platform Lift (Model V-1504)

The Savaria Vertical Platform Lift is an interior or exterior platform lift designed to provide multi-level building access for people with limited mobility. The frame structure is solid steel and offers the same drive unit with four different platform configurations. Its versatile design allows it to be installed inside or outside in both residential or public buildings. This model also features a battery operated emergency system with charger for up and down, and removable panels for easy main

Scald Guard

Valves only, or tub spout and shower head combinations. Can be set not to turn past hot temperature limit. Pressure balance available. Most have integral volume flow control.

Scg Series Mobility And Equipment Loading Ramp (Models Scg-2, Scg-3, Scg-4, Scg-5 & Scg-6)

The SCG Series Mobility and Equipment loading ramp, models SCG-2, SCG-3, SCG-4, SCG-5 and SCG-6, is a portable folding ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This ramp can be used to enable a wheelchair or scooter user to get into a vehicle or over steps. The ramp has a full width platform for stability and a built-in serrated surface for traction. The platform folds in half lengthwise for storage, and models SCG-3, SCG-4, SCG-5

Schlage Levers

Schlage Levers are door handle levers designed for use by individuals with fine motor or grasping disabilities. Levers are available in eight different styles (Accent, Avanti, Callington, Champagne, Elan, Flair, Jazz, or St. Annes) and 10 different finishes to fit the user's home decor. The same unit can be used as either a right- or left-hand lever. OPTIONS: Elan or Jazz style lever on keypad lockset. COLOR: Bright brass, antique brass, satin nickel, bright chrome, satin chrome, antique pewter,

Seabridge Cameo Walk-In Bath

The Seabridge Classic Walk-in Bath is a walk-in bathtub designed for use by individuals with mobility or balance disabilities or arthritis. This tub fits in the space of a standard tub or shower and is equipped with a door in the side, eliminating the need to step over the tub wall. The rotating Easy Assist entry and exit door is inward-opening and lever removable for caregiver access. Other features include a built-in seat with a contoured, anti-bacterial cover; a textured floor; fast-fill taps

Seabridge Classic Walk-In Bath

The Seabridge Classic Walk-in Bath is a walk-in bathtub designed for use by individuals with mobility or balance disabilities or arthritis. This tub fits in the space of a standard tub or shower and is equipped with a door in the side, eliminating the need to step over the tub wall. The inward-opening door has a palm-pad latch on the top that can be activated with the palm of the hand, a closed fist, or an elbow. Other features include a built-in seat with a contoured, anti-bacterial cover; a te

Seabridge Majestic Walk-In Bath

The Seabridge Majestic Walk-in Bath is a walk-in bathtub designed for use by individuals with mobility or balance disabilities or arthritis. This tub fits in the space of a standard tub or shower and is equipped with a door in the side, eliminating the need to step over the tub wall. The inward-opening door has a palm-pad latch on the top that can be activated with the palm of the hand, a closed fist, or an elbow. This tub also has a built-in powered, belt-style seat that lowers the user to the

Seabridge Paradise Walk-In Bath

The Seabridge Paradise Walk-in Bath is a walk-in bathtub designed for use by individuals with mobility or balance disabilities or arthritis. This tub fits in the space of a standard tub or shower and is equipped with a door in the side, eliminating the need to step over the tub wall. The inward-opening door has a palm-pad latch on the top that can be activated with the palm of the hand, a closed fist, or an elbow. This tub is equipped with a contoured backrest for fully-reclined bathing and it a

Seabridge Universal Slide-In Bath

The Seabridge Universal Slide-in Bath is an accessible bathtub designed for use by individuals with mobility or balance disabilities, spinal cord injury, or arthritis. This tub fits in the space of a standard tub or shower and is equipped with a door in the side, eliminating the need to step over the tub wall. The door of the Universal rises up and then swings out away from the bath to facilitate sliding tranfers to the tub seat. The system is spring assisted and can be operated by an individual

Seabridge Victorian Walk-In Bath

The Seabridge Victorian Walk-in Bath is a walk-in bathtub designed for use by individuals with mobility or balance disabilities or arthritis. This compact tub fits in the space of a standard tub or shower and is equipped with front-door entry, eliminating the need to step over the tub wall. The inward-opening door has a palm-pad latch on the top that can be activated with the palm of the hand, a closed fist, or an elbow. Other features include a built-in seat with a contoured, anti-bacterial cov

Seat Cushion (Model Ha-4783)

The Seat Cushion, model HA-4783, is a foam ring seat cushion designed for use by individuals who are at risk for developing pressures sores/decubitus ulcers. This polyurethane ring-shaped foam cushion helps reduce pressure and has a washable cotton cover. DIMENSIONS (HxLxW): 70 x 400 x 340 millimeters. WEIGHT: 370 grams.

Secondary Accessible Parking Signs

The Secondary Accessible Parking Signs are designed to be mounted underneath parking signs with the international accessibility symbol to give additional information concerning the parking space. Messages include: Van Accessible, Permit Required, Violators will be Fined, and Warning: Handicapped Parking Laws Enforced. Model SA12E contains a directional arrow that can be used for indicating either right or left. All writing is in capital letters. DIMENSIONS: 12 x 6 inches. COLOR: White lettering/

Security Bolt (700 & 900 Series)

Lever style security lockset door handles. 20 degree turn will operate 0.5 inch throw or 1 inch deadbolt tested to 1000 pounds torque. Bronze or stainless steel. Meets ANSI grade 1 requirements. Straight and return level designs available. Some models with interior security bolt. Keyed lock in handle.

Security Pole

The Security Pole is a vertical pole transfer aid designed for use by individuals with balance, mobility, or lower extremity disabilities. This pole can be installed in any room and placed beside a chair, bed, couch, toilet, shower, or tub to assist with standing and sitting and transfers. It can also be moved between rooms if needed. Made of rust-resistant, zinc-plated steel, this floor-to-ceiling pole is tension mounted and is packaged with its own wrench; no other tools are required. The Secu

Security Pole & Curve Grab Bar

The Security Pole and Curve Grab Bar is a vertical pole transfer aid designed for use by individuals with balance, mobility, or lower extremity disabilities. This pole can be installed in any room and placed beside a chair, bed, couch, toilet, shower, or tub to assist with standing and sitting and transfers. It can also be moved between rooms if needed. Made of rust-resistant, zinc-plated steel, this floor-to-ceiling pole is tension mounted and is packaged with its own wrench; no other tools are

See 4 Safety Mobility Light

The See 4 Safety Mobility Light is a small light designed for people with low vision and others that may need assistance navigating in low light conditions. Attaches to any size walker, rollator, or cane tubing. Senses both low light level and motion and automatically turns on and off.

Select Deluxe Voting Booth With Handicap Legs (Model Vb-103)

The Select Deluxe Voting Booth With Handicap Legs, model VB-103, is a wheelchair accessible voting booth designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. The unit's large writing surface accommodates Optical Scan Paper Ballots up to 21 inches long. Made from recycled plastic, the unit comes with four sturdy aluminum legs, two curved and two straight, that snap together. The booth comes in its own high impact, hea

Select Duo Voting Booth With Handicap Legs (Model Vb-203)

The Select Duo Voting Booth With Handicap Legs, model VB-203, is a wheelchair accessible voting booth designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. This unit has two booths that face each other, sharing a table top and separated by a partition. The aluminum legs are curved to allow a wheelchair to fit underneath the table, and the writing surface is high enough to accommodate an individual seated in a wheelcha

Self Supporting Adjustable Threshold Ramp (Models Ath1232 & Ath2432)

The Self Supporting Adjustable Threshold Ramp, models ATH1232 and ATH2432, is a ramp designed for use to make doorways accessible to wheelchairs for individuals with mobility disabilities or spinal cord injury. This ramp is designed for doorways that swing out or in, and its height is adjustable to fit a range of threshold rises. The unit aligns directly against the door threshold. Made of welded aluminum, it has a slip resistant grooved surface and accommodates wheelchairs and scooters with va

Self Supporting Threshold Ramp (Models Ssth1636-1.5, Ssth2436-2, Ssth2436-2.5 & Ssth2436-3)

The Self Supporting Threshold Ramp, models SSTH1636-1.5, SSTH2436-2, SSTH2436-2.5 and SSTH2436-3, is an accessible threshold designed to provide wheelchair access for doorways to individuals with mobility disabilities or spinal cord injury. This threshold ramp can be used in doorways with doors that swing out or in. It has an anti-slip, high-traction surface, and it is made of aluminum with durable, welded construction. DIMENSIONS (LxW): 16 x 36 inches with 1.5-inch rise (model SSTH1636-1.5);

Senior Swing Door System (5663 Series & 4663 Series)

The Senior Swing Door System, 4663 Series and 5663 Series, are electric powered door operators for interior or exterior doors. The door operator is available in overhead or surface applied housing. There are two modes of operation: handicapped or manual mode. In the Handicap mode, the door is actuated by pushing a button on either side of the door. The door opens slowly to back check in 3 to 6 seconds and to a fully open position in 4 to 7 seconds. The door remains open 5 to 30 seconds in preset

Senseez

The Senseez is a vibrating pillow and sensory integration activity designed for use by children with autism or other tactile, sensory, or neurological disabilities. Designed to enhance tactile awareness in children, these vinyl pillows with poly foam fill offer a gentle vibration when they are squeezed or sat upon. The pillow is available in three shapes - square, circle and heart. The round pillow is also available with a furry cover and a tail for additional tactile feedback. POWER: Uses three

Sensor Soap Pump

The Sensor Soap Pump is a liquid soap or lotion dispenser designed for use by individuals with neurological, upper extremity, or severe physical disabilities or spinal cord injury. This automatic unit dispenses soap touch-free when the user places a hand under the sensor. An LED light timer blinks for 20 seconds to indicate how long to lather for germ-free hands. Four volume settings allow the pump to dispense preset amounts of soap or lotion. The unit holds 14 ounces of soap or lotion. POWER: U

Sensory Table

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted sensory table for children of different ages with hearing or visual disabilities. An adjustable table with a round wooden top, a metal frame, and adjustable legs was used for this adaptation. The top of the table was removed from the frame and four indents were cut into the sides of the table allowing four children to stand supported at the table. A plastic container was fitted through a hole cut in the table top and the sq

Serena Pillow Lift

The Serena Pillow Lift is a pillow raiser designed for use by individuals with physical or respiratory disabilities. At the touch of a hand-control button, this under-pillow lift raises and lowers the user's upper body in bed. It assists users with limited upper body strength to alter their position from lying to sitting in bed. It also allows users with respiratory or cardiac conditions to sleep in a semi-elevated position. In its raised position, it may also assist with getting in and out of b

Serenity Homecare Enclosed Bed System

The Serenity Homecare Enclosed Bed System is a bed with enclosure designed to prevent individuals with cognitive, emotional, or behavioral disabilities from leaving the bed without the use of restraints. This freestanding bed has a healthcare quality mattress and soft side rails with an enclosure on all four sides. The ligthweight aluminum frame is padded and the enclosure side, head, and foot panels are made of soft polyester mesh and vinyl, providing security while maintaining air flow and vis

Serpentine Handicapped Shower Floor.

Black and white terrazzo shower floor is designed with 1/2 inch threshold for wheelchair accessibility. Floor is 40 inches wide and 40 inches deep. Meets California requirements. Cal. Title 24, Part 2-2- 1711 and ANSI Standard A-117.1-1980. .

Sheepskin Mattress Cover (Model 104)

The Sheepskin Mattress Cover, model 104, is a hospital bed mattress cover and decubitus pad designed for use by individuals at risk for pressure sores or ulcers. This tanned natural sheepskin is machine washable and dryable, and it has elastic straps on the corners to attach it to a mattress. It is intended for use in hospitals and nursing homes. DIMENSIONS (LxW): 72 x 32 inches. COLOR: Natural.

Sheffield Ada Picnic Table

The Sheffield ADA Picnic Table table is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This rectangular table has two benches and space at one end to accommodate a wheelchair. The frame is made from an average of 66% recycled steel. The table top and seats are made from heavy gauge expanded metal with 30% recycled plastic content. OPTIONS: Surface mount table clamps (2 per table) to deter theft. DIMENSIONS (HxLxW): Table is 31 x 96 x 3

Shelter - Open Front (Models 3-1, 3-2, 4-1, 4-2, 5-2, 6-2, & 6-3)

The Shelter - Open Front is a wheelchair- accessible shelter designed for use by individuals with mobility disabilities or spinal cord injury. This prefabricated shelter has a bench and backrest along its back wall, and provides protection from rain, wind, and snow at bus stops or other outdoor locations. The shelter has a framework made from anodized aluminum tubing, with clear tempered safety glass walls and an acrylic dome roof. DIMENSIONS (HxLxW): 7 feet x 7.5 feet x 2 feet, 8 inches (model

Shelter With Front Wind Shield And One Opening (Models S4-2, S6-2, S6-3, S4-4, & S6-6)

The Shelter with Front Wind Shield and One Opening is a wheelchair-accessible shelter designed for use by individuals with mobility disabilities or spinal cord injury. This prefabricated shelter provides protection from rain, wind, and snow at bus stops or other outdoor locations, with space for a wheelchair to enter and remain covered. It also includes a bench and backrest along its back wall. The shelter has a framework made from anodized aluminum tubing, with clear tempered safety glass walls

Shelter With Front Wind Shield And Two Openings (Models 4-2Ws, 5-2Ws, 6-2Ws, & 6-3Ws)

The Shelter with Front Wind Shield and Two Openings is a wheelchair-accessible shelter designed for use by individuals with mobility disabilities or spinal cord injury. This prefabricated shelter provides protection from rain, wind, and snow at bus stops or other outdoor locations, with space for a wheelchair to enter and remain covered. It also includes a bench and backrest along its back wall. The shelter has a framework made from anodized aluminum tubing, with clear tempered safety glass wall

Shiatsu And Vibration Neck Massager (Model: Nms-360)

The Shiatsu and Vibration Neck Massager is designed for persons with a stiff neck or someone who would benefit from a vibrating neck massage. There are three massage options for the neck. Device generates heat and there are handles on the front that the user may pull to increase the intensity of the massage. Has rotating nodes as it vibrates.

Shoeselect, The

The ShoeSelect™ is a motorized, electric shoe storage system designed for use by individuals with upper extremity, mobility, or neurological disabilities or spinal cord injury. Operating as a vertical carousel, the ShoeSelect™ has revolving shelves that rotate at the push of a button, bringing shoes down to a more reachable, viewable level. The unit consists of 2 columns of shelves - one behind the other, allowing users to double their shoe storage capacity inside closets or cabinets.

Shower Access Platform

CUSTOM ADAPTATION PURPOSE: To provide access to a shower stall for an individual with mobility disabilities. The shower of the home was too small to allow a shower chair to be maneuvered and the base of the shower was recessed into the floor, making it difficult to pull the chair out of the shower. The solution was to develop a platform or false floor made of marine plywood. The platform was square with one corner cut out to fit around a small ledge in the shower. The plywood was treated with a

Shower Anywhere (Models Sa-1, Sc-1, Sch-1, Ss-1, & Ss-2)

Shower Anywhere is a portable shower designed for use by individuals with mobility or severe physical disabilities. This system, models SA-1, SC-1, and SCH-1, consists of a plastic tank, a three-ply braided shower hose that stores in an annular groove in the tank when not in use, and a shower head with a fingertip flow control valve and a water conservation switch. Within the tank are an electric pump and a rechargeable batttery (where applicable). An accessory compartment in the tank stores a p

Shower Anywhere Stall (Model Shs-1)

The Shower Anywhere Stall, model SHS-1, is a portable shower designed for use by individuals who cannot access a conventional bathroom. The stall requires no permanent installation or electrical or water connections, enabling it to be moved as needed. This stall features a left- or right-hand mounted tilt-up transfer seat. The system includes the free-standing aluminum frame enclosure with shower curtains on three sides; a Shower Anywhere unit, model SA-1 (see entry); and a waste water reclaimin

Shower Anywhere Stall (Model Shs-2)

The Shower Anywhere Stall, model SHS-2, is a portable shower designed for use by individuals who cannot access a conventional bathroom. The stall requires no permanent installation or electrical or water connections, enabling it to be moved as needed. This stall features a swivel bench that rotates a full 90 degrees, enabling the user to sit or be placed on the bench outside the enclosure and then be rotated into the stall. An adjustable backrest with a chest belt and a lap belt aid in positioni

Shower Cabinet

Shower cabinet with sliding seat. Lock in front or rear position. Standard toilet seat, can be ordered with bedpan holder. Front has slots for splash guard door which must be removed to enter. Control panel has shower hose and thermostat. Optional shampoo basin.

Shower Cabinet (Model Ms 348)

The MS 348 is a 1-piece shower with a built-in corner seat. It features a textured floor with rounded corners, built-in soap dish, and pre-drilled openings for drain and overflow connections. The shower is made of fiberglass and thermoformed acrylic with resin backing. Valves can be located on either the left or right hand side. Shower value and head not included. DIMENSIONS: Overall measurements (WxDxH) are 48 x 34 x 84 inches; the ledge at the entrance is approximately 5 inches high; the entra

Shower Platform

The Shower Platform is an elevated shower platform designed for use by people with lower extremity and mobility disabilities, spinal cord industry and others who regularly use a wheelchair. The platform raises the floor of a shower to accommodate a wheelchair that must enter the shower using a ramp. It is designed to be used with a PVI Threshold Ramp (see separate entry), which is sold separately. Each platform is custom built to fit an existing shower basin; however, it is only available in a r

Shower Rail

CUSTOM ADAPTATIONPURPOSE: To enable a child with balance disabilities to steady him/herself in the shower. Designed to be completely removable and to provide balance assistance only, this grab bar is made of PVC pipe attached to commercial strength suction cups of the type used by glaziers to carry large panes of glass. PVC pipe uprights are fitted into the handgrips of the suction cups and joined to the horizontal bar with PVC joints. DIMENSIONS: The pipe is 31 millimeters in diameter. The grab

Shower Seat

The Shower Seat is a folding shower seat designed for use by individuals with balance, lower extremity, or mobility disabilities, arthritis, or spinal cord injury. This single-piece, wall-mounted seat has swing-down legs and is available with a phenolic, HDPE, or padded seat surface. DIMENSIONS (HxLxD): 18 x 22 x 16 inches. CAPACITY: 500 pounds.

Shower Seat For Wheelchair Transfer (Models 710A & 710T)

Wall mounted stainless steel shower seat with tubular frame, folds flat against wall. L shape to provide easy transfer. Teakwood or Naugahyde covered 2 inch foam cushion over plywood base. Seat dimensions are 32 inches by 20 inches by 13 inches. Seat height is determined by wall mounting. Right or left available.

Shower Sentry System

The Shower Sentry System is a shower and water temperature control system designed to prevent scalding for those with reduced sensation or slower reaction times. The system reduces the volume of water required for an effective shower and automatically shuts off when the water temperature reaches 115 degrees Fahrenheit. This enables the user to take a hot shower, but prevents scalding caused by the excessively high water temperatures produced by hot water heaters typically set at 140 degrees or h

Shower Stall (Model Shr-1)

The Shower Stall, model SHR-1, is a portable shower enclosure designed for use by individuals with mobility disabilities. The unit can be used as a shelter while showering outdoors or to enclose a portable toilet. Large enough for two users, this enclosure features front and rear openings that extend the full length of the curtains and can be closed and secured with the attached quick-release fasteners. Made of heavy-duty mildew-resistant vinyl, the curtains are attached to support bars at the t

Shower Trolley

The Shower Trolley is a portable bathtub designed primarily for institutional use. It consists of a stretcher on wheels with a vinyl mattress, raised sides lock in place, and a drainage system at foot of mattress.

Shower Veil Trackless Shower Door

The Shower Veil Trackless Shower Door is a shower door designed for use in roll in showers. The door opens and closes without sliding on a track, enabling wheelchair users to enter the shower without the necessity of getting over the track. Doors have one, two, or four panels made of lightweight, hollow core polycarbonate; the edge trim and hinges are made from high impact PVC thermoplastic. These lightweight doors are mounted to the walls, so no track is needed to carry the weight of the door.

Showertub (Model 3060)

The ShowerTub, model 3060, is a shower bathtub designed for use by individuals with walking or balance disabilities or arthritis. This single-threshold step-in shower repalces a standard five-foot bathtub and has a choice of a right- or left-handed drain. This shower features one-piece molded fiberglass construction with a slip-resistant floor and semigloss finish that resists mold, mildew and stains. OPTIONS: Stainless steel grab bar and a pull-down, wall-mounted shower seat. DIMENSIONS (LxW):

Sicare Light Ii

The SiCare Light II is an environmental control unit designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. This portable unit converts spoken commands into infrared (IR) signals to control devices such as television, telephone, lights, doors, and other IR and X-10 devices. The user can also enter commands though dual- or single-switch scanning. The unit has 15 pre-set command menus including television, bed, satellite, light, and device. Voice feedb

Side Rail Wedges (Models 5708 & 5708S)

The Side Rail Wedges, models 5708 and 5708S, are side rail pads designed to provide protection from injury from bed side rails. These wedges may be used singly to cover or close the gap between half side rails or zipped together to provide full-length protection of double half side rails, three-quarter side rails, or full-length side rails. Three pairs can be used to cover side rails and head- and footboards. These protectors are made of soft foam and covered in vinyl that can be wiped clean. D

Sidekick Curb Ramp

The Sidekick Curb Ramp is a curb ramp designed to provide wheelchair access for individuals with mobility disabilities or spinal cord injury. The ramp is made of aluminum and is available with or without a powder coated finish. It includes a bottom transition tread, non-skid surface, and a pair of legs, and is Available with or without Rails. DIMENSIONS (LxW): Usable surface is 36 x 36; 48 x 36; 60 x 36; 72 x 36; 36 x 42; 48 x 42; 60 x 42; or 72 x 42 inches. Outside Width is 39 or 45 inches. CAP

Sierra Electric Adjustable Workcenter

The Sierra Electric Adjustable Workcenter is a powered height adjustable computer work station designed for use by individuals who use wheelchairs, individuals of short stature, individuals who stand to work, and others who can benefit from a higher or lower work station. The surface height adjusts at 2 inches per second, with a lifting capacity of 250 pounds. The backlit liquid crystal display (LCD) control panel has tactile soft-touch control buttons and three programmable memory height preset

Simple Travel Pillow

The Simple Travel Pillow is a contoured inflatable pillow designed to provide support for the head and neck of a person who sits for long periods of time. List other features and descriptions here. When placed behind the user's head, this pillow provides cervical neck support, and it supports the head laterally so that the head and neck remain aligned with the spine. It also has an inflatable dome pump to provide a customized firmness for each user. The Smart Travel Pillow has high impact polyme

Simplicity Wheelchair Lift Ramp

The Simplicity Wheelchair Lift Ramp is an exterior wheelchair lift and ramp designed for use by individuals with lower extremity, mobility, or neurological disabilities, cerebral palsy, or spinal cord injury and others who use wheelchairs. When not in use, the unit acts as a ramp to facilitate entry and exit from a doorway that is 12 to 24 inches above the ground. To enter the doorway, the user wheels onto the ramp and applies the wheelchair's brakes. When the device is activated, it raises the

Single Fold Ramp With Carry Bag (Models Stds1093, Stds1094, Stds1095, Stds1096, & Stds1097)

The Single Fold Ramp with Carry Bag, models STDS1093, STDS1094, STDS1095, STDS1096 and STDS1097, is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This ramp enables the user to transition a wheelchair or scooter from one surface height to another. The unit is durable and lightweight , and it comes with a carry bag. Perforated slots keep water from collecting on the ramp. OPTIONS: Additional carrying bag. DIMENSIONS (LxW): 24 x

Single Handle Kitchen Faucet (Model 40-200)

The Single Handle Kitchen Faucet, model 40-200, is a kitchen faucet with a single loop-style handle designed for use by individuals with grasping disabilities. The unit has a long spout with a brass escutcheon plate or base ring, two holes, a ceramic disc cartridge, and half-inch IPS compression adapters. DIMENSIONS: Spout is 10 inches long. COLOR: Chrome.

Single Handle Kitchen Faucet (Models 40-460, Al-460, & Wh-460)

The Single Handle Kitchen Faucet is a single lever kitchen faucet designed for use by individuals with fine motor, grasping, or upper extremity disabilities. Features include a spout with brass escutcheon plate or base ring; a pull-out spray nozzle; single- or three-hole installation; a ceramic disc cartridge; and a loop-style handle. The maximum water flow is 2.2 gallons per minute (gpm). The faucet unit comes with 12-inch copper supplies with half-inch soldered male adapters. DIMENSIONS: Spout

Single Handle Pressure Balance Tub/shower Fittings (Model C0-44-720)

The Single Handle Pressure Balance Tub/Shower Fitting, model C0-44-720, is a single lever shower faucet control designed for use by individuals with grasping or upper extremity disabilities. The wrist blade lever handle can be activated manually, or by wrist or elbow. The system has an adjustable shower head, solid cast brass housing, a ceramic cartridge, and pressure balance capability to maintain a temperature range of plus or minus 3 degrees Fahrenheit. CAPACITY: 2.5 gallons per minute (gpm)

Single-Handed Barber

This Single-Handed Barber is an electric hair trimmer that cuts evenly in any direction, enabling you to maintain your own closely cropped, clean-cut hairstyle. As simple as combing your hair, the circular trimmer's rotary cutting system and stainless steel blades cut as the unit is moved circularly through your hair while accommodating the contours of your pate. The trimmer's two attachments cut hair to four different lengths (at 1/8 inch , 1/4 inch , 3/8 inch , or 1/2 inch) and its ergonomic d

Singlefold Ramp (Models Sfw230, Sfw330, Sfw430, Sfw530, Sfw630, Sfw730 & Sfw830)

The Singlefold Ramp, models SFW230, SFW330, SFW430, SFW530, SFW630, SFW730 and SFW830, is a portable ramp designed for use by individuals with mobility disabilities or spinal cord injury. This lightweight welded ramp folds In half, and all models except the SFW230 have a handle for carrying like a suitcase. The ramp has a full platform with an anti-slip, high traction surface that accommodates wheelchairs and scooters with a variety wheel configurations. A steel security pins and a safety DVD ar

Sink Access Stairs

CUSTOM ADAPTATION PURPOSE: To enable a teenage girl with short stature to independently access a bathroom sink. A three-step ladder was made of stainless steel tubing. Bent into a D shape, the side rails of the ladder act as handrails for the user. Stair treads for the ladder were made of waterproof plywood coated with polyurethane and painted with non-slip tread deck paint. Crutch caps were fitted to the ends of the legs. TITLE: Bathroom Access. JOURNAL: TAD Journal. REF: Volume 27, Number 3,

Sink Modifications

DO IT YOURSELF - PURPOSE: To make a bathroom and sink more accessible to seniors and others with arthritis, mobility disabilities, and other physical disabilities. This introduction to a chapter entitled "Bathroom & Washing Up" suggests a variety of modifications to the existing fixture. Included are supporting the sink with brackets or legs, rather than a vanity and insulating pipes to prevent injury; adding a counter with open access at seated height for a wheelchair user and install small

Sit Bath (Model 076200)

Sit bath for ambulatory or wheelchair persons. Sliding seat facilitates entering cabinet, locks in position. Front door with seal allows water to be filled to shoulder level. Control panel with thermostat, shower hose and optional shampoo basin.

Sitz Bath

The Sitz Bath is a sitz bath designed for use by individuals with severe physical disabilities. It is useful in the treatment of hemorrhoids and other conditions in the anal and genital areas, especially after an episiotomy. It has wide contoured edges for comfort and comes with a convenient on-off flow control clip. It is designed to fit standard toilets. The bath is equipped with no-kink tubing. The bag capacity is two quarts and basin capacity is 2.1 quarts. DIMENSIONS: The tubing is 60 inche

Sitz Bath (Model 6148)

Sitz Bath is made of durable plastic with a contoured seat that fits inside standard toilet seat. Irrigation container and tubing are included.

Sitz Bath (Model C1104)

The Sitz Bath, model C1104, is designed for use by individuals with difficulty treating or cleansing anal or genital areas. This plastic bath fits most standard commodes.

Skidguard

SkidGuard is a non-slip floor and stair tread covering and detectable warning surface designed for use to make floors and stairways safer for pedestrians with low vision or balance, walking or lower extremity disabilities. This non skid, high visibility, abrasion resistant pedestrian surface includes glass bead, which heightens the visibility of the surface when light sources reflect off it. The angular cut glass also increases its skid resistance. The covering can be used on ramps, stair treads

Skylark Dimmer

The Skylark Dimmer is a lighting control system designed for use by persons with physical disabilities. It features a sliding light lever constructed for pre-set dimming capabilites and a push button switch to maintain a selected lighting level. This unit also works with LuMaster Central Home Lighting System and is designed with power failure memory and radio frequency interference (RFI) suppression. OPTIONS: Dual slide models for control of two lights or fan and light are available. Night light

Sl-1000 Stairlift

The SL-1000 Stairlift is an interior seat lift designed for use by individuals with balance, lower extremity, mobility, or walking disabilities or arthritis. The lift works on straight stairs in residential applications, enabling the user to glide up and down the stairway. The lift has a 0.5 horsepower motor, and it can cover inclines ranging from 25 to 50 degrees, with a maximum travel distance of 32 feet, at a nominal speed of 20 feet per minute. It has a high capacity seat with adjustable wi

Sl600 Pinnacle Premium Stair Lift

The SL600 Pinnacle Premium Stair Lift is an interior stair lift designed for use by individuals with balance, mobility, or walking disabilities. This stair lift has a comfortable seat with height adjustment and folding footrest. The track/rail is made of clear anodized aluminum. The lift has a 24-volt direct current (DC) motor. The SL600 can be configured to be controlled by the right or left hand. The seat travels up to 70 feet, swivels at upper landing, and folds back against the wall when not

Sl600Hd Pinnacle Heavy Duty Stair Lift

The SL600HD Pinnacle Heavy Duty Stair Lift is an interior stair lift designed for use by individuals with balance, mobility, or walking disabilities. This stair lift has a contoured seat with extra-high molded seatback and folding footrest. The track/rail is made of clear anodized aluminum. The lift is powered by a 24-volt direct current (DC) motor. The SL600 can be configured to be controlled by the right or left hand. The seat travels up to 40 feet, rotates up to 90 degrees at the top and bott

Sleep Apnea Pillow

Firm pillow is designed for individuals who have sleep apnea and to keep C-PAP and Bi-PAP face masks in place. Its shape helps prevent leaks and pressure points. Washable polyester/cotton cover. Polyester fill. 27"x19"x4-1/2". Sleep apnea pillow is firmer and designed especially for C-PAP and Bi-Pap users to help keep face masks in place. Pillows shape helps keep mask in place and prevents leaks and pressure points. Accommodates multiple sleeping positions, side, stomach and back. Removable cove

Sleep Posture Pillow / Side Sleeper Pro

The Sleep Posture Pillow/Side Sleeper Pro is a body support pillow designed for use by individuals with sleep apnea, snoring, fatigue, neck and back pain, and bed soreness. This pillow is formed and shaped to support the head, neck, back and jaw for proper alignment. The pillow encourages side sleeping rather than rolling onto the back or stomach which can cause a twisting of the spine and back strain. A small space on the pillow accommodates the user’s ear and prevents painful "ear folding." Th

Sleep Vip Transcend Travel Cpap (Sku 12Nst 100)

The SleepVIP Transcend Travel Continuous Positive Airway Pressure (CPAP) machine is designed for use by individuals who live with sleep apnea. Small and portable. Universal Hose Adaptor. Portable battery-powered. Vibration-free blower As for compliance reporting, this CPAP system is email-capable. Apnea-Hypopnea Index (AHI) and leak detection. 13 months of data storage on device and downloadable onto Universal Series Bus (USB). E-mail address and prescription required for purchase. Operating pre

Sleep-Safe Pillow

The Sleep-Safe Pillow is an anti-suffocation pillow designed for use by individuals with epilepsy or seizures. The pillow has features to help prevent suffocation. It is made from a soft, porous foam with an open cell structure for breathability. Any head movement pumps air from the interior cavity across channels that pass around the head. The surface is rippled to provide a profusion of air spaces between the surface of the pillow and the net cover. Air can pass freely over the surface of the

Sleeper Lounge Electric Bed

The Sleeper Lounge Electric Bed is an adjustable motorized bed designed for home use by individuals with spinal cord injury or severe physical disabilities. This bed elevates to a full sitting position and features coil springs, box springs, and reversible mattresses, which are available in five firmnesses from soft to extra, extra firm. The bed also includes heavy- duty ticking, cordless dual side controls plus hand control unit, and belt drive. SIZES: Available in twin, full, queen, king, and

Sleeping In Comfort System

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted system to raise and lower legs at night for an individual with muscular dystrophy. The man with muscular dystrophy began using a ventilator at night and had to start sleeping on his back. He developed severe pain in his knees after three hours of sleeping in this position due to pressure that built up on his kneecaps. The individual was unable to change positions in the night without assistance, and since he lived independe

Sleeping Wedge

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted wedge for sleeping for a young adult with quadriplegic cerebral palsy. Initially an abduction wedge was used to assist in keeping the young adult’s hips in correct position after repeated surgeries. However, while the wedge is no longer needed for orthopedic reasons this individual does not feel comfortable sleeping without it but has since outgrown the original wedge. The new design had to account for variations in body me

Slimtek Ii

Slimtek II is a detectable warning surface designed to provide tactile warning of potential dangers to individuals who are blind or have low vision. It uses the truncated domes design. This cast-in-place detectable warning surface is lightweight but durable, with a slim profile and an anchor system that allows for quick tile replacement. DIMENSIONS (LxW): 2 x 2, 2 x 3, or 2 x 4 feet. WARRANTY: The manufacturer warrants its products to be free from manufacturing defects for a period of 5 years fr

Slip Tech Safety Floor Treatments

Slip Tech Safety Floor Treatments are non-slip floor coverings designed to make most stone and tile floor surfaces meet the coefficient of friction requirements imposed by the Americans with Disabilities Act, whether the surface is wet or dry. The treatments work on both level surfaces and on ramps and are applicable to ceramic tile, most stone surfaces, agglomerates, and concrete; they cannot be applied to wood, vinyl, or epoxy floors. Slip Tech increases the slip-resistance of the floor by a m

Slumber Series Hi Side Bed (Models Ss 120, Ss 170 & Ss 190)

The Slumber Series Hi Side Bed, models SS 120, SS 170 and SS 190, is an enclosed bed designed designed to prevent individuals with cognitive, emotional, or behavioral disabilities or autism from leaving the bed without the use of restraints. This bed features solid wood construction and an enclosure that extends 32 inches above the mattress. It has a poly resin coated Bunkie board. There is a door on one side of the bed that locks on the outside and folds down to open. The door has acrylic panel

Slumber Series Standard Side Bed (Models Ss 100, Ss 150 & Ss 180)

The Slumber Series Standard Side Bed, models SS 100, SS 150 and SS 180, is an enclosed bed designed designed to prevent individuals with cognitive, emotional, or behavioral disabilities or autism from leaving the bed without the use of restraints. This bed features solid wood construction and an enclosure that extends 20 inches above the mattress. It has a poly resin coated Bunkie board. There is a door on one side of the bed that locks on the outside and opens down. The door has acrylic panels

Smart Shower

The Smart Shower is designed to enable individuals to shower independently with the use of only one hand. The device ensures safety, remaining stable in a fixed position with the help of an antilock system.

Smart-Rail

The Smart-Rail is a transfer aid designed to assist individuals with mobility and balance disabilities in entering and exiting the bed. The steel rail attaches to a steel frame that slips between the mattress and the box springs. Safety straps provide additional support in anchoring the unit to the bed. The unit locks in place at the bedside and lifting it to unlock it allows it to swing out to assist in standing. Models are available for standard and hospital beds. OPTIONS: Leg extenders. DIMEN

Smartbuilt Home

The SmartBuilt Home is an house with built-in automation designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. The house has built-in home automation that links lighting, electrical outlets, HVAC (heating-ventilation-air conditioning) and home entertainment to a central computer, allowing them to be operated from anywhere in the home, or remotely via telephone or the internet. In-wall touchscreens show the status of the entire home through simple gr

Smartwalk 1400 & Smartwalk 1800

The SmartWalk 1400 and SmartWalk 1800 are pedestrian traffic sensors designed to provide hands-free activation or extension of walk signals for people with vision or mobility disabilities. The SmartWalk 1400 uses microprocessor analyzed Doppler mictowave micro-motion technology to determine when a pedestrian is in the detection pattern at curbside for a sufficient length of time to warrant the walk signal being activated. The walk signal is automatically activated without the pedestrian having t

Smooth Grab Bar

The Smooth Grab Bar is a wall-mounted grab bar designed for use by individuals with balance or mobility disabilities or spinal cord injury. It attaches to the wall at two points (for lengths below 36 inches) or three points (for lengths 36 inches or longer). DIMENSIONS: 12, 16, 24, 32, 36, 42, 48, or 60 inches long. COLOR: Available finishes include antique brass, polished brass, polished nickel, satin chrome, satin nickel, satin brass, satin gold, antique copper, black nickel, polished gold, oi

Smoothee (Model 4010)

Door closer can be used on side hung door, for interior or exterior, mounted on pull side on door. Spring powered closer, adjustable sweep, latch speed, and backcheck. Spring power adjustable to increase power by 50 percent. Handling must be specified. Optional hold open arm, fusible link, finishes, metal cover. Ten year warranty on parts. Has built in delayed closing feature that delays the closing of the door up to one minute. Adjustable to fifth opening force.

Smoothee (Model 4020N Del)

Door closer can be used for interior or exterior on side hung balanced door mounted on push side jamb. Spring powered closer has adjustable sweep speed, latch speed and backcheck. Optional hold open arm, fusible link, finished, metal cover. 10 year warranty on parts. Has built in delayed closing feature that delays the closing of the door up to one minute. Adjustable to fifth opening force.

Smoothee (Model 4110N Del)

Door closer can be used on side hung door, interior or exterior. Spring powered closer is mounted on push side of door and has adjustable sweep speed, latch speed and backcheck. Spring power adjustable to increase power by 50 percent. Optional hold open arm, fusible link, finishes and metal cover. 10 year warranty on parts. Has built in delayed closing feature that delays the closing of the door up to one minute. Adjustable to fifth opening force.

Snoezelen Projector Kit A

Snoezelen Multisensory environments (MSE) are a specialized selection of sensory equipment and materials that may help clients adapt their responses to sensory stimulation and to advance education and therapy goals. Each Snoezelen construction is designed to offer individuals with special needs and challenging conditions the opportunity to exercise choice through action.

Snoezelen Solar Projector Kit B

Snoezelen Multisensory environments (MSE) are a specialized selection of sensory equipment and materials that may help clients adapt their responses to sensory stimulation and to advance education and therapy goals. Each Snoezelen construction is designed to offer individuals with special needs and challenging conditions the opportunity to exercise choice through action.

Snow Wolf Wheeled Snow Shovel

The Snow Wolf Wheeled Snow Shovel is designed to prevent lower back strain. Unlike traditional snow shovels, the Snow Wolf utilizes a large wheel to provide leverage and help you reduce back pain and risk of injury. The Snow Wolf is designed to be lightweight and easy to maneuver. It features a durable frame that folds down for easy storage and transport. In addition, there are a variety of accessories designed to help clear your walkways and driveways. OPTIONS: Snap-on wear strip, Gravel wheels

So-Lo Bathtub/shower

The So-Lo Bathtub/Shower is a walk-in shower and bathtub designed for use by individuals with arthritis or mobility disabilities. This combination shower and bathtub has a door with a low entry step, and is avaiable with either a left- or right-hand drain. OPTIONS: Heated shower deck for seating; warm air massage system (12 warm air jets with check valves, warm air blower, and touch pad control); and faucet/drain kit (Moen Posi Temp TL 183 non-scald faucet, tub spout with diverter, and pop up dr

Sof-Sitz

The Sof-Sitz is a portable, inflatable sitz bath that fits on rim of a toilet or a toilet seat. Made of heavy duty vinyl, the Sof-Sitz is designed to fit all standard toilet seats. WARRANTY: 1-year limited warranty.

Soft Curtain Ada Voting Booth (Model 2000Scl)

The Soft Curtain ADA Voting Booth, model 2000SCL, is a wheelchair accessible voting booth designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. Made of heavy duty plastic, this self-contained, lightweight voting booth is large enough to accommodate up to a 21-inch optical scan ballot. It has a blow molded lid and base with cloth side panels and aluminum legs. The booth is stackable for storage. OPTIONS: Clip on fluore

Soiree Toilet (Models Ms964214Cfg & Ms964214Cf)

The Soiree Toilet, models MS964214CFG and MS964214CF, is a tall toilet designed for use by seniors and individuals with physical disabilities. This 1.6 gallons per flush (GPF) elongated one-piece toilet has a large water surface and a powerful, quiet siphon jet flush. The toilet comes with a Soiree SoftClose toilet seat, an elongated closed front seat with a hinge system that lowers the seat down to the bowl gently and quietly to prevent injury and eliminate toilet seat slam. A tank cover, fitti

Solid Ramp

The Solid Ramp is a portable ramp designed for indoor or outdoor use by individuals with mobility disabilities. This ramp creates a pathway over smaller elevation changes and has a rigid design for a solid feel. The surface has a unique hole pattern for traction and drainage. DIMENSIONS: Available in 3-, 4-, 5-, 6-, and 7-foot lengths. All models are 36 inches wide. CAPACITY: 700 pounds. WEIGHT: The 3-foot model weighs 24 pounds, the 4-foot model weighs 32 pounds, the 5-foot model weighs 40 poun

Solid Ramp (Models Sl330, Sl336, Sl430, Sl436, Sl530 & Sl536)

The Solid Ramp, models SL330, SL336, SL430, SL436, SL530 and SL536, is a ramp designed for use by individuals with mobility disabilities or spinal cord injury. The ramp's full platform is welded and has an anti-slip, high traction surface, and accommodates wheelchairs and scooters with a variety of wheel configurations. Steel security pins and a safety DVD are included. DIMENSIONS (LxW): 36 x 30 inches (model SL330); 36 x 36 inches (SL336); 48 x 30 inches (SL430); 48 x 36 inches (SL436); 60 x 30

Solid-Fold Ramp

The Solid-Fold Ramp is a portable ramp designed for indoor or outdoor use by individuals with mobility disabilities. This ramp creates a pathway over larger elevation changes and offers width-wise folding for ease in transportation. The surface has a unique hole pattern for traction and drainage. DIMENSIONS: Available in 7-, 8-, 9-, 10-, and 12-foot lengths. All models are 36 inches wide. CAPACITY: 700 pounds. WEIGHT: The 7-foot model weighs 64 pounds, the 8-foot model weighs 72 pounds, the 9-fo

Sona Snore Pillow

The Sona Snore Pillow is an anti-snoring pillow designed for use by individuals with respiratory disabilities. Intended to keep air passages open for individuals with mild apnea and snoring, this pillow positions the user in a side-sleeping position by laying the head on top with the arm through the open recess on the underside of the pillow. It is filled with hypoallergenic SoftLoft polyester fiber fill and includes a form-fitting, removable cotton cover that can be spot cleaned. DIMENSIONS (Hx

Sonalert Crosswalk Audible Signal Devices (Models Vsb110-1 & Vsb110-2)

Sonalert Crosswalk Audible Signal Devices are audible pedestrian signals designed for use by individuals who are blind or have low vision. Model VSB-110-1 produces a cuckoo sound at 800 and 1200 Hertz (Hz), which repeats every 1.5 seconds. It is intended for use on north-south crosswalks. Model VSB-110-2 produces a chirp at 2000 Hz, which repeats every one second, and is intended for use on east-west crosswalks. POWER: Uses 110/120 volts alternating current (AC). DIMENSIONS (HxLxW): 1.6 x 4 x 1.

Soothe-A-Matic

The Soothe-A-Matic motorized swing is a swing with an overhead support frame designed for use by children and adults with emotional, cognitive, physical, or neurological disabilities, or autism. The system includes a Sooth-A-Matic Swing Frame, a variable speed motor and controller, and a Cedar Porch Swing (other types of swing are optional). The swing's soothing motorized movement is intended to provide sensory stimulation therapy through swinging, spinning and rocking and to help the user bette

Southpaw Frog Swing (Model 1925)

The frog swing, model 1925, is a swing designed to provide proprioceptive stimulation and vertical movement for individuals who are gravitationally insecure and low tone. The user is supported across the stomach with a sling while the arms and legs are free to control the bouncing. The individual is in direct control of how much stimulation he receives as well as the security or insecurity of there position. The Safety Strap must be used with the Frog Swing to prevent overstretching the stimulat

Southpaw Net Mat (Model 0136)

The Net Mat, model 0136, is a therapy mat designed to be used in the Therapy Net (see separate entry) to keep the net open for individuals with a physical disability. The mat includes special fasteners which secure the mat and makes it easier to place the individual in the net. This product helps put the client at easebecause it prevents pinching and frees the arms and chest area. The mat has firm and comfortable foam center with a removeble, washable cover. DIMENSIONS: 26 inches wide x 52 inche

Spa Shell

Bathing system. Shell of bathing unit rotates from vertical position to horizontal position. In vertical position the user sits on, or transfers to, the built in seat. Full immersion bathing with complete coverage of legs. 65 gallon capacity. Ergonomically designed faucet valve fills tub. Control panel installable for user or attendant access. Built in thermostatic mixer with temperature gauge. Built in disinfection system automatically mixes water and disinfectant. Vacuum thermoformed, coextrud

Space Savers And Cabinet Organizers

The Space Savers and Cabinet Organizers are vinyl coated wire cabinet organizers available in shelves, racks, and baskets.

Space-Saver Walk In Bathtub

The Space-Saver Walk In Bathtub is an accessible bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. Features include an anti slip floor and seat; right- or left-mounted doors; 16-jet hydrotherapy spa with hot temperature maintainer; thermostatic mixing valve control unit; hand-held showerhead; and a curtain rod and matching shower curtain. DIMENSIONS (HxLxW): 38 x 37.5 x 26 inches. Seat is 15.5 inches high. Door is 17 inches wide. COLORS: White or

Spaloo Classic

Spaloo Classic is a toilet bidet designed for use by individuals with mobility or upper extremity disabilities. Made of germ-resistant plastic, this unit is designed to fit existing round or oval toilets and features a heated, hydraulic soft close seat. Other features include two water spraying nozzles for front and back cleaning, adjustable water pressure, adjustable water temperature, and adjustable seat temperature. Controls are located at the side of the seat. WARRANTY: One-year warranty.

Speak4Use

Speak4Use is an environmental control system and voice input and environmental control program designed for people who are blind or have low vision or who have mobility disabilities. It is designed to provide wireless voice control of a person's computer as well as environmental, communications and entertainment systems that are connected to the computer. After installing the Speak4Use (S4U) software on a computer, the user adds the S4U Environment Controller (included) which provides the voice

Special Care Shower Unit (Model Sc6060)

Molded fiberglass shower stall accessible to wheelchairs. Fabricated of fiberglass over a cellular inner core and a reinforced polyester outer protective coating. Unit has a detachable 48 inch wide by 20 inch deep wheelchair accessible ramp, with an attached rubber mat for no-skid traction. An l8 inch wide stainless steel and teakwood fold-down seat is attached to the side wall. Five grab bars made of l 1/2 inch18 gauge stainless steel, attached with 3 by 3 inch metal mounting plates. Two 24 inc

Special Care Shower Unit (Models Sc4586Cs & Sc4186)

Molded reinforced shower units are fabricated of fiberglass over a cellular core and a reinforced polyester outer protective coating. Grab bars are made of 1 1/2 inch 18 gauge stainless steel, mounted with 3 by 3 inch metal mounting plates. SC4586CS has two grab bars: l6 inch straight grab bar is mounted at an angle on the back wall with the lower mounting 33 inches from the floor of the unit; 24 inch straight grab bar is mounted vertically on the valve wall with the bottom of the bar 42 inches

Special Care Tub And Shower Unit (Model Sc6083)

Molded reinforced fiberglass bathtub and shower unit is fabricated of fiberglass over a cellular inner core and a reinforced polyester outer protective coating. Equipped with four grab bars, secured from the rear with a 3 by 3 inch metal mounting plate. Two 32 inch straight grab bars are mounted horizontally on the flat back wall at heights of 21 and 29 inches from the tub floor. One 24 inch straight grab bar is mounted horizontally on the valve wall 29 inches above the tub floor, and a 12 inch

Special Needs Shower (Model Xst 6337 Bf 1.25Ww)

The Special Needs Shower, model XST 6337 BF 1.25 WW, is a controlled environment shower with built-in grab bar and seat designed for use with individuals with Alzheimer's Disease. The 24-inch wing wall design allows the toilet or vanity to be closer to the shower, creates a splash-free cove, and defines the space for user security. Controls are out of reach or completely outside of the shower on the wing wall. Contrasting color bars provide further definition and assist visual depth perception.

Special Needs Wheelchair Accessible Shower (Model 6236)

The Special Needs Wheelchair Accessible Shower, model 6236, is an accessible roll-in shower stall designed for use by individuals with mobility disabilities or spinal cord injury. The unit has a chip-resistant gelcoat finish reinforced with fibreglass, and comes with a left- or right-hand 18-gauge stainless steel grab bar. When installed as per installation instructions, the shower has a sloped threshold for wheelchair access, while retaining water within the shower. This shower also has a molde

Sportsplay Picnic Work Table (Models 382-510 & 382-511)

The SportsPlay Picnic Work Table is an indoor/outdoor table designed to accommodates 6 seated plus 2 wheelchairs for children in a wheelchair. The height allows most youth wheelchair arms to fit under the table. The frame is made of 1 5/8" OD galvanized pipe. DIMENSIONS: 8 feet x 30 inches x 30 inches high; 6 foot benches. WEIGHT: 135 pounds (aluminum), 200 pounds (wood).

Sportsplay Wheelchair Picnic Work Table (Models 382-513 & 382-514)

The SportsPlay Wheelchair Picnic Work Table is designed with an open leg design to provide easy access for children who are in wheelchairs. It offers extra height neccessary to allow a child in a wheelchair a comfortable fit. Up to 8 wheelchairs can fit around the table. The top is available in untreated No. 1 yellow pine or anodized aluminum. The support frame is made of 1 5/8" OD galvanized pipe. OPTIONS: You may purchase separately the legs and hardware only. DIMENSIONS: 4 x 8 feet. WEIGHT: 1

Sstd Traditional System

The SSTD Traditional System is a detectable warning surface designed for use by individuals who are blind or have low vision. This system provides a one piece, monolithic look for applications ranging from radius corners to a long stretch of domes running the length of a walkway. All seams are hidden because of the way the system is installed on-site. This flexible cement-based mat can cover many square feet of asphalt or concrete in one application. It is attached to the surface using the manuf

Stainless Steel Grab Bars (Models Gb-11224C, Gb-11230C, Gb-11236C, Gb-11242C, Gb-11248C, Gb-11412C, Gb-11416C, Gb-11418C, Gb-11424C, Gb-11430C, Gb-11436C, Gb-11442C, & Gb-11448C)

Stainless Steel Grab Bars are designed for use by individuals with balance or mobility disabilities. Each grab bar comes with six stainless steel screws. DIMENSIONS (diameter x length): 1.5 x 24 inches (model GB-11224C), 1.5 x 30 inches (model GB-11230C), 1.5 x 36 inches (model GB-11236C), 1.5 x 42 inches (model GB-11242C), 1.5 x 48 inches (model GB-11248C), 1.25 x 12 inches (model GB-11412C), 1.25 x 16 inches (model GB-11416C), 1.25 x 18 inches (model GB-11418C), 1.25 x 24 inches (model GB-1142

Stair Tread For The Visually Impaired

Stair Tread for the Visually Impaired is a visual orientation marking and non-skid stair tread designed for use by individuals who are blind or have low vision. This rubber stair tread has a raised carborendum strip in a high contrast color. Tread styles include Decorative and Classic with round or square profiles, and a one-piece tread/riser combination. OPTIONS: Harsh environment treads impervious to toxic chemicals, abrasions, and grease (one-piece tread/riser combination only). DIMENSIONS: T

Stairglow Handrail Cover (Models Ph101 & Ph102)

The StairGlow Handrail Cover, models PH101 and PH102, is a visual orientation marking and emergency evacuation navigation aid designed to help individuals with low vision or balance or walking disabilities locate the handrail in order to walk up or down stairs more safely. These covers attach permanently to a wide variety of stair rails. Covers are available to fit square (model PH102) or round (PH101) handrails. A co-extruded photoluminescent strip is an integral part of the unit. It glows for

Stairglow Stairnosing (Models Ps101 & Ps102)

Stairglow Stairnosing, models PS101 and PS102, is a high contrast warning surface and anti-slip stair tread covering designed to increase stairway safety for individuals with low vision or balance or walking disabilities. A photoluminescent strip and a non-skid tread are molded into the stair surface. The photoluminescent strip glows for several hours after being exposed to ambient light. The surface creates a highly visible step edge to reduce falls and to guide people using the stairs during p

Stairlift Sc

The StairLIFT SC, is an interior stair lift designed to provide multi-level access for people with limited mobility. This seat lift mounts on side of stairway and features a folding padded chair with independent flip-up armrests. Call and send controls are located at the top and bottom of the stairs and on the chair. Safety features include obstruction sensors, a broken cable safety device, a built-in night light/power indicator, and manual operation in the event of a power failure. POWER: Ope

Stairs Ada Sign

The Stairs ADA Sign is a braille sign designed for use by individuals who are blind or have low vision. The sign has a pictogram of steps, with the word "Stairs" in sans serif letters and braille. The sign is made of high impact styrene with a non-glare surface, and can be used outdoors or indoors. Double-faced adhesive tape is included on back for mounting. DIMENSIONS (HxW): 9 x 6 inches. The sign is 1/8 inch thick with 0.5-inch radius corners. Pictograms, borders, lettering, and braille are r

Stairway Trolley, Walker.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Lightweight hand operated trolley, or pulley device which rides on a stair railing to pull a walker or other light objects up stairs. Photographs and diagram of a triangular-shaped aluminum frame with nylon casters to ride on a 1 5/8 inch stair rail, and another caster at the bottom which rides along the wall. Carrier hooks, as for holding a bicycle, are attached to hold the walker. The device is pulled upstairs with a nylon cord passed through a small

Stall Partitions (Models Fp-500, Ft-700, & Ch-700)

Accessible restroom stall partitions, 32 inch door with 36 inch wide stall and 34 inch or 36 inch (optional) door with 60 inch wide stall. Outswinging door and latching device easily grasped. Mounts on ceiling or floor. Steel/enamel or plastic laminate material composition. Depth of stall optional. Coat hook mounted at 57, 60 or 72 inches. Partitions can be reinforced for grab bars.

Stand Alone Threshold Ramp

The Stand Alone Threshold Ramp is an accessible threshold designed to make a doorway or single- step rise accessible to wheelchair or scooter users. The threshold has adjustable legs with a two-inch range, which can be helpful for locations where the surface is uneven, such as decks or turf. The ramp is made of aluminum or painted steel with a non-slip button or expanded metal surface. Safety side curbs are cut level to the top of the threshold allowing a door to open over the ramp. DIMENSIONS (

Stand-Helping Closetool Toilet Seat

---- PROTOTYPE --------- PURPOSE: To design a prototype of a toilet seat that assists individuals with arthritis or balance, lower extremity or mobility disabilities to stand from a seated position after using the toilet. The Stand-helping Closestool Toilet Seat is a toilet seat with a hydraulic-powered lever function, which helps individuals to stand up with ease from a seated position on the toilet. The device could be used with a walker, cane, other mobility devices, or a hand rail. TITLE: St

Stand-Up (Model Ckb-01 & Ckb-02)

The STAND-UP, models CKB-01 and CKB-02, is a grab bar for toilet designed for use by people with standing, balance, lower extremity and mobility disabilities. The unit has a stainless steel base with non-slip rubber edges that rests on the floor and does not require mounting to the floor, wall or ceiling. The base has a U-shaped indentation at one end so that it extends along both sides of the toilet. Two handrails are mounted on each side of the base, extending alongside the length of the toile

Stand-Up (Models Cka-01, Cka-02, Cka-03, Cka-04, Cka-05 & Cka-06)

The STAND-UP, models CKA-01, CKA-02, CKA-03, CKA-04, CKA-05 and CKA-06, is a standing aid and grab bar designed for use by individuals with standing, mobility or lower extremity disabilities who need assistance rising from a bed, chair or sofa. The unit has a stainless steel base with non-slip rubber edges that rests on the floor and does not require mounting to the floor, wall or ceiling. Plastic coated steel pipes with wood grain exterior finish are mounted securely on the base to form a suppo

Standard Braille Signs

Standard Braille Signs are tactile signs designed to indicate permanent rooms, services, and other messages in public facilities. Each sign contains an English word or phrase in capital letters and the Grade 2 Braille translation beneath it. Messages include: Women, Men, Exit, Stairway, Restroom, No Smoking, Escalator, Telephone, Elevator, Cafeteria, Lobby, and Conference Room. MOUNTING: Each sign supplied with foam tape for indoor mounting. DIMENSIONS: 8 x 2 inches. COLOR: Black, brown, red, b

Standard Power Toilet Aid

The Standard Power Toilet Aid is an elevated toilet seat and lift combination designed for use by individuals with lower extremity and mobility disabilities. The device can be installed and removed from most standard and institutional toilets. It consists of a steel frame with arm rests, a padded backrest and an electric lift that lifts the toilet seat (not included) 13 inches above the toilet. A single button controls up and down movement. The unit collapses for transport. DIMENSIONS (HxW): 39.

Standard Threshold Ramp (Models Thr832, Th1032, Th1232, Th1632, Th1636, Th2432 & Th2436)

The Standard Threshold Ramp, models THR832, TH1032, TH1232, TH1632, TH1636, TH2432 and TH2436, is a threshold ramp designed to make doorways accessible to wheelchairs for individuals with lower extremity or mobility disabilities or spinal cord injury. The ramp has holes punched in its top corners so it can be secured to the surface of the doorway using hardware that is included with the ramp. The unit is made of lightweight, durable aluminum with an anti-slip, high traction surface. DIMENSIONS (

Stander Curve Grab Bar

The Curve Grab Bar is a wall grab bar designed for use by individuals with balance, mobility, or lower extremity disabilities or arthritis. This grab bar is made of rust-resistant zinc-plated steel. It has two major components, a vertical, curving ladder-like shape that provides four gripping heights and pivots 180 degrees, and a horizontal grab bar that extends from the bottom of the curved part. The swiveling bar locks in place at 0, 90, and 180 degrees. DIMENSIONS: The total height when insta

Stanley Accesspro

The Stanley AccessPro is a powered door operator designed for use in long-term care, rehabilitation, assisted living, and health facilities. This system provides automation of new or existing manual doors. The system unlocks, opens, closes, and relocks doors at the touch of a button. Up to 15 remote controls can be programmed to one door system. Keyed access and manual operation remains intact. Operation stops when an obstruction is encountered. The system includes a motor/gear box attached to

Stannah Curved-Rail Stairlift (Model 260)

The Stannah Curved-Rail Stairlift, model 260, is an interior stair lift designed for use by individuals with mobility, walking, or balance disabilities. The lift rail is custom-made to fit the user's stairs. The rail can be designed to allow the chair to be parked off the stairs, or if the rail cannot be designed to run onto the top landing, a swivel seat allows the user to turn onto the landing so that the back of the chair blocks the stairs. The unit comes with two radio-controlled remotes, on

Stannah Outdoor Stairlift (Model 320)

The Stannah Outdoor Stairlift, model 320, is an exterior stair lift designed for use by individuals with mobility, walking, or balance disabilities. The lift is able to withstand a wide range of weather conditions, with a seat made from a plastic that doesn't fade or crack in the sun, and metal parts that are double powder-coated to prevent rust. The operating temperature range is 14 to 105 degrees Fahrenheit. The lift's swivel seat can be swiveled to face onto the top landing, so that the back

Stannah Straight Stairlift (Model 420)

The Stannah Straight Stairlift, model 420, is an interior stair lift designed for use by individuals with mobility, walking, or balance disabilities. This stair lift has a folding seat with arms and a footrest, and comes with two infrared wireless remotes, one for each landing. Safety features include a center-clasp seat belt, an over speed governor, and safety sensors on the footrest and both sides of chair, to stop the stairlift if it touches an obstruction. A key lock is located under one of

Stay Warm Cherry Stone Thermal Pillow

The Stay Warm Cherry Stone Thermal Pillow is a hot or cold pack designed for use by individuals with arthritis or pain. This therapeutic thermal pillow is filled with cherry stones, packed in a one-hundred-percent cotton pouch. The pillow can be heated in a microwave for 3 minutes or in a conventional oven for 15 minutes for a long lasting, slightly moist penetrating heat. The pillow molds to the user's body and caresses away aches and pains, while the natural moisture in the stones gives off a

Stay Warm Thermotherapy Cherry Stone Warming And Cooling Neck Pillow

The Stay Warm Thermotherapy Cherry Stone Warming and Cooling Neck Pillow is a hot or cold pack and cervical pillow designed for use by individuals with arthritis or neck, shoulder, or upper back pain. This specially shaped pillow with cherry stone filling wraps around the neck to give localized comfort. After three minutes in a microwave or 15 minutes in a conventional oven, the pillow provides long lasting, penetrating heat, which is quickly conducted to the area of discomfort as the pillow mo

Staydry Collapsible Water Dam

The StayDry Collapsible Water Dam is a flexible water dam for shower stalls designed for use by individuals with mobility or walking disabilities. This dam enables a wheelchair or a walker to transfer in or out of a shower without encountering a barrier as it collapses when rolled or walked upon. The water dam controls both the shower water and the shower curtain. The dam is installed by cutting to size using a pair of sissors. Apply by removing the paper covering the two strips of double sided

Steel Bathtub Rail

The Steel Bathtub Rail is a grab bar for bathtub designed for use by individuals with balance or mobility disabilities, spinal cord injury, or arthritis. The rail has two holding areas on the handle for a firm grip when getting in and out of the tub. It has a stainless steel locking system and rubber pads to protect tub contact surfaces, and is available in Fixed Height or Adjustable Height models. WARRANTY: Limited lifetime warranty.

Step Assist

Step Assist are bathtub access stairs designed for use by individuals with lower extremity disabilities or arthritis. These steps have a modular design that allows stacking a second step for an additional rise while a third unit provides a stair-step effect. The step has an extra-large platform with a textured finish top for added slip-resistance. Rubberized feet help prevent the unit from slipping. DIMENSIONS(WxLxH): 19.75 x 16 x 4 inches. One step adds 4 inches; a second one stacked adds an a

Step Block Modification

CUSTOM ADAPTATION PURPOSE: To provide a customized step block to provide stability, and allow a person with cerebral palsy to step up unaided. Twenty millimeter (mm) steel tubing is used to form a U-shaped frame that goes around the three sides of the step block. The frame has four uprights that descend to each of the four corners of the step. Holes are drilled into the corners of the step block, and the frame is fitted with metal saddles which are bolted through the underside. The frame is pai

Step Lift

CUSTOM ADAPTATION PURPOSE: To allow a person with mobility disabilities to traverse a step when installation of a ramp or other type of stair lift is not practical. Have a qualified installer install a deck mount van lift, attaching it to the upper floor of the step. The floor support structure should be checked to determine if it has adequate strength to allow operation of the lift. (Additional support may need to be added.) Power to lift should be obtained from a deep-cycle 12-volt automotive

Step Stool With Handrail (Model 601)

The Step Stool with Handrail, model 601, is a step stool designed for use by individuals with balance disabilities, caregivers, or those of short stature. This single-step stool has a nylon-coated tubular steel frame, fitted non-slip ferrules, and a fluted, rubber-covered wooden top. The stool has a high vertical handrail. DIMENSIONS: The height of the hand rail from step stool top is 32.5 inches (82 centimeters). The height of the handrail from the floor is 41.5 inches (105 centimeters). The st

Step Stools (Models 600 & 600S)

The Step Stools are step stools designed for use by caregivers or those of short stature. These stools have nylon-coated tubular steel frames, fitted non-slip ferrules, and fluted, rubber-covered wooden tops. OPTIONS: Both models are available with extra tall handrails. DIMENSIONS: Model 600 is 9 inches high; model 600S is 6 inches high. CAPACITY: 140 kilograms (22 stones).

Step-Safe Cast In Place

Step-Safe Cast In Place is a detectable warning surface designed to meet ADA (Americans with Disabilities Act) accessibility guidelines for individuals who are blind or have low vision. Designed for permanent installation, this pre-cast polymer concrete tile has truncated domes to alert visually impaired pedestrians of impending hazards in pedestrian travel routes in public buildings and/or public rights-of-way. The polymer concrete provide high strength and resistance to corrosive agents such a

Step-Safe Surface Applied Mat

The STEP-SAFE Surfaced Applied Mats is a detectable warning surface designed for use on curb cuts and other locations to alert pedestrians who are blind or have low vision about approaching hazards. The mat is brightly colored, and it can be cut to fit. It has a pattern of truncated domes that can be felt underfoot. The mat is durable and can maintain its slip resistance for years. DIMENSIONS: 24 x 36, 24 x 48, or 24 x 60 inches. Dome spacing is 1.71 inches. COLOR: Gray, red or yellow.

Stepless Easyfold Pro Ramp (Models 30080-095, 30080-120, 30080-150, 30080-180 & 30080-210)

The Stepless EasyFold Pro Ramp, models 30080-095, 30080-120, 30080-150, 30080-180 and 30080-210, is a portable ramp designed to provide wheelchair or scooter access for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. The ramp can be folded for transport and storage. The ramp is made of anodized aluminum with a skid resistant surface and stainless steel brackets. It also has curbs on both sides to prevent the user from rollin

Stepless Easyfold Pro3 Ramp (Model 30080-165)

The Stepless EasyFold Pro3 Ramp, model 30080-165, is a portable ramp designed to provide wheelchair or scooter access for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. The ramp can be folded lengthwise into thirds for transport and storage. The ramp is made of anodized aluminum with a skid resistant surface and stainless steel brackets. It also has curbs on both sides to prevent the user from rolling off the side of each t

Stepless Easyfold Ramp (Models 30060-090, 30060-120, 30060-150 & 30060-180)

The Stepless EasyFold Ramp, models 30060-090, 30060-120, 30060-150 and 30060-180, is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. This single-fold ramp can be folded and carried with the attached carrying handles or stored. When unfolded, the ramp provides a solid non-skid surface. The ramp can be positioned and removed as needed to overcome minor height differences. Models 30060-1

Stepless Easyfold Telescopic Ramp (Models 30070-180, 30070-210, 30070-240, & 30070-300)

The Stepless EasyFold Telescopic Ramp, models 30070-180, 30070-210, 30070-240 and 30070-300 is a portable ramp and van ramp designed to provide wheelchair or scooter access to structures and vans for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. The length of the ramp is adjustable so it can be used to provide access between two surfaces with a variety of height differences. The telescopic function prevents finger pinching

Stepless Excellent Doorstep Ramp Kit (Models 100, 101, 102, 103, & 104)

The Stepless Excellent Doorstep Ramp Kits, models 100, 101, 102, 103 and 104, is a threshold ramp designed for use to make doorway thresholds accessible to wheelchair users or individuals with walking disabilities. Each ramp has three layers, of which the two upper layers are loose for adjustment in height. The ramp in Kit 100 can level differences from 0 to 0.875 inches; Kit 101 is for differences from 0.875 to 1.625 inches; Kit 102 is for differences from 1.625 to 3 inches; Kit 103 is for diff

Stepless Excellent Doorstep Ramp Kits 0, 1, 2, 3, & 4 (Models 11-12100, 11-12101, 11-12102, 11-12103, & 11-12104)

The Stepless Excellent Doorstep Ramp Kits 0, 1, 2, 3, and 4, models 11-12100, 11-12101, 11-12102, 11-12103, and 11-12104, are ramps designed for use to make doorway thresholds accessible to wheelchair users and individuals with walking disabilities. Each ramp has three layers, of which the two upper layers are loose for adjustment in height. The ramp in Kit 0 (11-12100) can level differences from 0 to 0.875 inches; Kit 1 (11-12101) is for differences from 0.875 to 1.625 inches; Kit 2 (11-12102)

Stepless Folding Ramp (Models 30020-110, 30020-160, 30020-210, 30020-260, & 30020-310)

The Stepless Folding Ramp, models 30020-110, 30020-160, 30020-210, 30020-260, and 30020-310, is a two-track portable ramp designed to provide wheelchair access for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs. Each track is made of anodized aluminum with a skid resistant surface and stainless steel brackets. It also has curbs on both sides to prevent the user from rolling off the side of each track. This ramp has impact-proof, non-skid

Stepless Lifting Platform (Model Lp6)

The Stepless Lifting Platform, model LP6, is an exterior wheelchair lift designed to lif individuals who use wheelchairs or who have walking disabilities over small height differences. Designed for use in situations in which ramps would be too steep or to long, this unit can be used as permanent or temporary installations. A choice of an electrically or manually operated ramp provides access to the lift and prevents the wheelchair from rolling off while the lift is in use. The electric ramp can

Stepless Lifting Platform (Models Lp1 & Lp3)

The Stepless Lifting Platform is an interior or exterior wheelchair lift designed to lif individuals who use wheelchairs or who have walking disabilities over small height differences. Designed for use in situations in which ramps would be too steep or to long, these units can be used indoors or outdoors and as permanent or temporary installations. A choice of an electrically or manually operated ramp provides access to the lift and prevents the wheelchair from rolling off while the lift is in u

Stepless Lifting Platform (Models Lp12)

The Stepless Lifting Platform, model LP12, is an exterior wheelchair lift designed to lift individuals who use wheelchairs or who have walking disabilities on and off trains. This unit can be transported while folded directly to and used on any railway platform; positioning is accomplished using the built-in clontrol arm. The lifting platform wheels are equipped with a central braking system. Made of weatherproof materials, this unit can be stored under a variety of conditions. POWER: Uses a bu

Stepless Lite Ramp (Models 30100-070, 30100-085, 30100-125, 30100-165 & 30100-205)

The Stepless Lite Ramp, models 30100-070, 30100-085, 30100-125, 30100-165, and 30100-205, is a portable ramp designed for use by individuals with mobility disabilities or spinal cord injury. Made of glass and graphite fiber, the Stepless Lite Ramp is lightweight and folds lengthwise for transport and storage. It has a non-skid surface with a raised edge on each side, and a carry handle on one side for transporting the ramp when folded. It can be used by passengers on public transport, including

Stepless Plain Ramp (Models 30000-050, 30000-105, 30000-130, 30000-155, & 30000-200)

The Stepless Plain Ramp, models 30000-050, 30000-105, 30000-130, 30000-155, and 30000-200, is a two-track portable ramp designed for use to provide wheelchair access for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. Each track is made of anodized aluminum with a skid resistant surface and stainless steel brackets. Each ramp also has curbs on both sides to prevent the user from rolling off the side of the ramp. Both ramp tr

Stepless Telescopic Ramp (Models 30015-100, 30015-150, 30015-200, 30015-250 & 30015-300)

The Stepless Telescopic Ramp, models 30015-100, 30015-150, 30015-200, 30015-250 and 30015-300, is a two-track portable telescoping ramp to accommodate manual and electric wheelchairs for use with steps and curbs and to enter or exit vans. Made of aluminum with a non-skid surface, each track has raise edges on each side and a handle on one side. The edges have soft rubber ends to help hold the track in place. DIMENSIONS: The length of each track extended / collapsed is - 39.125 / 26.5 inches (mod

Stepless Wide Folding Ramp (Models 30040-150, 30040-200, 30040-250, & 30040-300)

The Stepless Wide Folding Ramp, models 30040-150, 30040-200, 30040-250 and 30040-300, is a portable ramp designed for use to provide wheelchair or scooter access for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. This ramp's increased width is intended to provide increased safety for users of scooters and electric wheelchairs and their helpers. The unit can be kept permanently in position or always used in the same place. T

Stepless Wide Plain Ramp (Models 30030-100, 30030-125, 30030-150, 30030-200, & 30030-300)

The Stepless Wide Plain Ramp, models 30030-100, 30030-125, 30030-150, 30030-200, and 30030-300, is a portable ramp designed for use to provide wheelchair or scooter access for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. This ramp's increased width is intended to provide increased safety for users of scooters and electric wheelchairs and their helpers. The unit can be kept permanently in position or always used in the sam

Steps Plus Precast Concrete Handicap Ramp

Steps Plus Precast Concrete Handicap Ramps are outdoor ramps designed to provide wheelchair access to buildings. These ramps have non-skid surface and are available in a variety of widths and with a variety of finishes, including simulated granite or limestone. OPTIONS: Form finish side walls; ornamental iron trim. COLOR: Gray or 11 other standard colors; custom color matching is available. Iron trim is white or black.

Sterling 1000 Series Straight Stair Lift

The Sterling 1000 Series Straight Stair Lift is an interior stair lift designed for use by individuals with balance, lower extremity, or mobility disabilities. The lift has a folding seat that runs on an aluminum track on one side of the stairway. There are three seating options: A standard Luxury seat, a SpaceSaver seat that takes up less space for use on narrower stairs, and a Perch seat that allows the user to travel in a more upright posture. The seats have wipe-clean, flame-retardant uphols

Sterling 2000 Series Curved Stair Lift

The Sterling 2000 Series Curved Stair Lift is an interior stair lift designed for use by individuals with balance, mobility, or walking disabilities. The lift fits any curved stairway and fits close to the wall with a swivel seat and folding footrest. OPTIONS: Perch seat alowing the user to go up and down stairs in a semi-standing posture; overrun to allow the user to step off at the top landing without swiveling the seat. POWER: Uses 24 volts direct current (DC) battery. DIMENSIONS: Seat swivel

Stockerston Blanket Cradel (Model 137)

The Stockerston Blanket Cradle, model 137, is a blanket support designed for use by individuals at risk for pressure sores/ulcers. Constructed from plastic coated steel tubing, this device has closed and open ends, the latter being placed between the mattress and bed base. The weight of the bed clothes is supported, keeping them clear of the patient for ventilation and pressure relief. DIMENSIONS (WxHxL): 16 x 18 x 30 inches. COLOR: White.

Stonecap Rubber Threshold (Models Stc0110, Stc1110, & Stc1510)

The StoneCap Rubber Threshold, models STC0110, STC1110 and STC1510, is an accessible threshold designed for use to make doorways and room entrances accessible for individuals with lower extremity, mobility and walking disabilities or spinal cord injury. Made of 100 percent recycled rubber, the threshold has a slip resistant surface, and it has no load weight limitations. It has molded miter ends, and it can be trimmed to fit a specific area with simple cutting tools. OPTIONS: Grooved surface ava

Stop-Slip St

Anti skid coating. Resists oil, alcohol, dilute acids, cleaning agents and water. Use on floors, sidewalks, ramps. Made of resinous plastic and mineral fibers. Apply with roller. One gallon covers 50 square feet. Set time is 24 hours (hard) and 4 to 6 days for full cure. Available in 2- or 5-gallon cans. COLOR: Black, grey, or tan.

Straight Grab Bar

The Straight Grab Bar is a wall grab bar designed for use by individuals with balance or mobility disaabilities, arthritis, or spinal cord injury. These grab bars are made of stainless steel tubing, with concealed-screw mounting flanges heliarc welded to the bar to form a single structural unit. This grab bar is available in various lengths. DIMENSIONS: Tubing has an outer diameter of 1.25 or 1.5 inches with a wall thickness of 0.05 inches. Flanges are 3 inches in diameter. The bar is available

Straight Grab Bar (Model B-5806)

The Straight Grab Bar, model B-5806, is a wall grab bar designed for use by people with balance, lower extremity and mobility disabilities. This straight grab bar is constructed of type 304 stainless steel 18-gauge tubing with a satin finish. It has a concealed mounting flange with a stainless steel plate and screw holes for concealed anchors. A stainless steel cover snaps over the mounting flange to conceal the screws. DIMENSIONS: Available in lengths of 18, 24, 30, 36, 40, 44 and 48 inches. Th

Stress Buster Massaging Footrest (Model 2119)

The Stress Buster Massaging Footrest, model 2119, is a footstool and foot massager designed for use by individuals with lower extremity disabilities. This massaging footrest features alternating rollers for a relaxing foot massage. The adjustable tilt encourages frequent position changes during prolonged desk work to help reduce leg pressure and improve circulation. The unit has a steel frame with a plastic footpad. DIMENSIONS (HxDxW): 5 x 20.5 x 20.25 inches. WEIGHT: 7 pounds. COLOR: Black foot

Stress-Ease Pillow

The Stress Ease Pillow is a cervical pillow designed to provide head and neck support. The pillow has a concave center area designed to support the head while sleeping. Multi-sized cervical lobes help provide proper cervical alignment and support to the head and neck. The pillow is made of 100 percent hypoallergenic polyester fiber with a polyester and cotton cover. The fabric cover is tightly woven to filter out bacteria, mold, and mildew odors. This pillow fits most standard pillow cases. DIME

Strobe Alarm

The Strobe Alarm is a visual smoke alarm designed for deaf and hearing impaired. The photoelectronic detector activates a high intensity flashing strobe light, horn and fire warning sign. The portable unit plugs into wall socket with 8 foot cord. An indicator light is provided for continuous testing of unit, and manual testing is also provided by a test button. Automatic reset.

Sturdy Heavy Load Bedside Table

CUSTOM ADAPTATION PURPOSE: To provide a sturdy, heavy load table accessible from an individual’s bedside for a person with quadriplegia. The table has a U-shaped base and post made from square steel, with 3-inch castors on the four points of the U. Attached to the top of the post is a rectangular square steel frame on which rests a wooden table top with a lip to stop items from falling off. The wooden top has two handles on one side so that an individual can move it easily. The table is useful

Suction Grab Bar, Adjustable Length

The Suction Grab Bar, Adjustable Length, is a grab bar designed for use by individuals with lower extremity or balance disabilities or arthritis. This bar telescopes for adjustability and can be used on a shower wall, in the bath mounted on the tub, as a temporary towel bar, or near a chair or stairwell for assistance when standing or climbing stairs. It is portable and installs on most smooth surfaces without tools. Large suction cups on each end and secure to the surface with lock/release leve

Suction Grab Bar, Fixed Length

The Suction Grab Bar, Fixed Length, is a grab bar designed for use by individuals with lower extremity or balance disabilities or arthritis. This bar can be used on a shower wall, in the bath mounted on the tub, as a temporary towel bar, or near a chair or stairwell for assistance when standing or climbing stairs. It is portable and installs on most smooth surfaces without tools. Large suction cups on each end and secure to the surface with lock/release levers. OPTIONS: Replacement suction cups

Suction Tub Grab Bar (Models 1255A, 1255B, & 1255C)

The Suction Tub Grab Bar is a bathtub grab bar designed for use by individuals with balance or mobility disabilities. The adjustable length bar attaches with suction. SIZES: Small (model 1255A), medium (model 1255B), or large (model 1255C). DIMENSIONS: Length is 17.25 to 22.25 inches (small), 22 to 27 inches (medium), or 26 to 30.75 (large). CAPACITY: 250 pounds. COLOR: White. WARRANTY: Three-year warranty on the grab bar, one-year warranty on the suction cups.

Sugru

Sugru is a self-setting rubber that can be formed by hand. It molds like play-dough, bonds to myriad materials and turns into a strong, flexible silicone rubber within 24 hours. It can be used for many do it yourself projects to assist people with disabilities, such as making a dial suit arthritic fingers, add tactile grip to a 3D printed prosthetic, pad sharp edges on wheelchairs, etc. Other uses can be found at: http://sugru.com/great-for/disability

Suitcase Ramp (Model Ramp-Sf)

The Suitcase Ramp, model RAMP-SF, is a folding portable ramp designed for use by individuals who use wheelchairs. The ramp's surface has a serrated grip with debris slots. The ramp folds for transportation. DIMENSIONS (LxW): 72 x 28 inches. CAPACITY: 500 pounds. WEIGHT: 33 pounds.

Suitcase Ramps

Suitcase Ramps are portable ramps designed for use by individuals with mobility disabilities. These hinged tracks have a non-skid surface and cover gaps, curbs, and steps. A nylon carrying case is included. DIMENSIONS: All models are 30 inches wide. These ramps are available in 3, 4, or 5 foot lengths. WEIGHT: The 3 foot model weighs 15 pounds, the 4 foot model weighs 21 pounds, and the 5 foot model weighs 26 pounds.

Suitcase Ramps

The Suitcase Ramp is a portable ramp designed for use by individuals with mobility disabilities or spinal cord injury. This ramp provides wheelchair or scooter access over curbs, steps, and doorways. The ramp accomodates wheelchairs and scooters with various wheel configurations. To operate, the hinged ramp is unfolded and positioned for maximum safety and support. Its single-fold design allows it to be folded in half lengthwise to be carried like a suitcase when not in use. The ramp includes a

Summit Max Lift

The Summit Max Lift is an interior stair lift designed for use by individuals with balance, mobility, or walking disabilities. This stair-mounted lift installs on either side of a staircase. Its extruded aluminum track is factory cut to fit the user's stairs. Constant-pressure pendant controls stop the lift when the control is released. It is available with either two hand-activated call controls (24 volt) or wall-mounted call-send controls. Limit switches automatically shut the unit off at the

Summit Stairway Lift

The Summit Stairway Lift is an interior stair lift designed for use by individuals with balance, mobility, or walking disabilities. The stair-mounted, extruded aluminum track installs on either side of the staircase and is factory cut to fit the stairs. The unit's controls mount on either armrest. Foot- or finger-activated call controls can be mounted on either the wall or floor at the top and bottom of the stairs. Constant-pressure controls stop the lift the instant the user releases the contro

Sunroc Drinking Fountains And Water Coolers

Wheelchair accessible drinking fountains either wall mounted or free standing, interior and exterior. Vandal resistant. Some models available with infrared sensor or push bars at extra cost. A number of units have dual height fountains and coolers.

Super Grip Perma Handle

The Super Grip Perma Handle is a bathroom safety product designed to help with getting in and out of the bathtub/shower and to help prevent slips or falls. It is a textured handle, opposed to a Chrome, Vinyl, or Enamel Hand Bar. It is made for individuals with balance issues and/or any other disability that makes it difficult to step in or out of the bathtub or shower. It can be used by a person of any age and attaches to most surfaces. It screws in for a permanent hold and can be mounted vertic

Super Smoothee (Model 4041)

Door closer can be used on side hung, balanced door, for interior use. Spring powered closer mounts on push side, pull side, on top jamb (push side only) or on door. Has adjustable sweep speed, latch speed and back check. Opening force 3 to 8 pounds. Optional hold open arm, finishes and metal cover. 10 year warranty on parts.

Superior Footrest

The Superior Footrest is a footstool designed for use by individuals with lower extremity or back disabilities. This unit tilts 45 degrees forwards and back with the movement of the user's feet for relaxing exercise while sitting. The unit is non-metallic and fits in a briefcase or backpack. Its legs fold for storage and carrying. DIMENSIONS (HxDxW): 3.5 x 7 x 15 inches; when folded, 0.75 inches high. COLOR: Transparent, blue, green, brown, pink, or gray. WARRANTY: 30-day return in original pack

Superpole & Superpole Bariatric

The SuperPole Transfer System is a transfer aid designed to assist individuals with mobility disabilities. Available in standardand bariatric models, this modular system may be used beside the bath, toilet, bed, or chair and offers sturdy support. Made of rigid heavy-gauge steel, the pole features a slip-resistant rubberized foam grip, a low-profile base, and a rubber friction pad on the top and floor anchor plate to prevent twisting during use. The system is available with the pole only, with a

Superpole Traveler

The SuperPole Traveler is a portable transfer aid designed for use by individuals with balance, walking, or mobility disabilities. Central to the system is a floor-to-ceiling vertical steel grab bar, which provides a secure structure that can be installed in minutes between a floor and ceiling. The unit installs by turning the jackscrew at the bottom of the pole. The screw expands the pole to create enough tension between the floor and ceiling to hold the pole secure. Rubber pads on the ceiling

Superremote Home Automation Kit

The SuperRemote Home Automation Kit is a cordless remote control switch system for lights, television, VCR, and other appliances, designed for use by individuals with mobility disabilities. This three-piece home automation kit can control lights and appliances through an X10 remote control. The kit includes one Universal UltimateREMOTE (model UR19A), one Transceiver Module (model TM751), one Lamp Module (model LM465), and an instruction manual.

Supersaver Ada Picnic Table (Models Bdt8Hdp & Bdt8Hdsm)

The SuperSaver ADA Picnic Table is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This long, rectangular table has centered seats on both sides and space for wheelchair access at each end. The tabletop and seats are made from steel with a thermal-fused plastic coating, and the frame is powder-coated galvanized steel. The table is available in a portable version (model BDT8HDP) or a surface- mounted version (model BDT8HDSM). DIMENSIONS

Superscoop (Model 842-4310)

The Superscoop is a device with two large loop handles that operate a scoop-shovel. Can be used from a wheelchair. Operates in a 160í arc for access to a sandbox. Area required for installation: 6 feet diameter.

Supertrapeze

The SuperTrapeze is a support bar designed for use with Healthcraft's SuperPole. The add-on allows a user to pull themselves in an upright position out of bed or off a couch. The two offset ladder rungs help to improve arm strength and increase back comfort. The device can be stowed when not in use.

Support Frame For Bath Insert

CUSTOM ADAPTATIONPURPOSE: To support a bathtub insert at a height that is comfortable for the parents when bathi