The Hand Gym Exercise Unit Designed for people with arthritis, partial paralysis, Multiple Sclerosis, CVA, spinal cord injuries or people recovering from hand surgery. Helps improve strength, dexterity, and range of motion using isometric and resistive movements while the hand is positioned for optimal functioning. Finger joints can be exercised individually or together.
The Achiever Universal Forearn Support is designed for use by individuals with upper extremity disabilities. This brushed nylon Neoprene support features a sewn-in felt pad for enhanced compression and hook-and-loop closure. SIZES: One size. COLOR: Tan
The Acuback heat roller is designed to relieve tension with therapeutic warmth. IT is microwavable and offers back and neck support. Nubby or textured supports create acupuncture-like therapy to release tight muscles and the design recreates the natural curve of the lumbar spine. Realigns the upper back and neck. Place it under neck, lower back, legs, or hands. Warm in microwave for one minute for 75 minutes of deep, soothing heat. Carrying case included.
Fracture orthosis for stable fractures of the lower leg, stress fractures, and ankle sprains in very tall people. Features U shaped stirrup design lined with preinflated, adjustable aircells. Stirrup provides support for the injured leg; aircells provide graduated compression to help reduce swelling and edema. Brace comes in left or right. Small Leg Brace for people 5 feet 2 inches and under.
The Custom Pre-Assembled Femoral Orthosis / KAFO (Knee-Ankle-Foot Orthosis) is a fracture orthosis designed for use by individuals with lower extremity disabilities. Available for the right or left leg, this orthosis features four components: Femoral brace, tibial brace, knee joint, and shoe insert. The brace offers a choice of knee joints: range of motion, drop lock, free motion, or adjustable. The range of motion joint is adjustable in increments of 7.5 degrees and the dial-in design permits q
The Dynafoam Elbow Extension Tubes are elbow extension orthoses, or flexion contracture splints, made of open-cell Dynafoam. The tubular design utilizes the dynamic properties of the foam to extend gradually, yet effectively. These tubes fit from the shoulder to the wrist to promote elbow extension. Each splint has 3 Velcro cinch strap closures to secure it to the arm. The tubes may be washed or autoclaved, and the foam may be adapted with a razor blade or scissors. An optional tapered polyethyl
The Dynafoam Knee Extension Tubes ##1132 - ##1135 are leg positioners and flexion contracture splints made of lightweight open-cell foam. The tubular design utilizes the dynamic properties of the foam to extend gradually, yet effectively. These tubes fit from midthigh to ankle to promote knee extension. Each splint has 3 Velcro cinch strap closures to secure it to the limb. The tubes may be washed or autoclaved, and the foam can be adapted with a razor blade or scissors. An optional tapered poly
The DynaSplint LPS Unit is an extension or flexion contracture splint designed to allow joint movement during use. The brace uses low intensity force over a prolonged period of time to relieve shortened connective tissue of elbows, knees, wrists, ankles, and hips. The unit consists of stainless steel rods containing steel compression springs with hinged joints, and 2 cuffs with velcro closures attached to the top and bottom of the rods. The splint will fit on either right or left extremities.
The DynaSplint Pediatric Units are extension or flexion contracture splints designed to increase joint motion and reduct contracture of the knee, elbow, wrist, or ankle. The brace consists of stainless steel with a velcro-adjustable front and back cuffs. Spring tension force is adjustable from 0 to 1.66 foot pounds (4 pounds of force at the distal end of the unit). Force is controllable with a screw adjustment inside the distal ends of the lower leg or forearm struts. SIZE: The unit will fits ar
The Elasto-Gel Cast & Splint Pads are orthoses liners designed to be used under casts, splints, pressure suits and garments, masks and dressings; to stabilize braces, orthotic and prosthetic devices; as padding for the prevention and treatment of decubitus ulcers; and to protect skin grafts. The pads are made from a formulated hydrogel which contains a natural skin moisturizer/conditioner. This hydrogel has properties which allow it to absorb excess perspiration from the skin and transmit it
Foam Tubing Utensils are designed for individuals with upper extremity disabilities to allow them to grasp utensils, making it easier for them to feed themselves. They are made by drilling holes into 1/2 inch foam tubing. The hole inside the tubing should be made small enough to fit snuggly on the handle of a fork, knife, and/or spoon and the tubing should be cut to the length of the handle of the fork, knife, and/or spoon. This allows people with limited dexterity to eat using a for, knife, or
The Maramed Custom HKAFO (Hip Knee Ankle Foot Orthosis) and KAFO (Knee Ankle Foot Orthosis) are fracture orthoses designed for use on the lower extremities. These orthoses enable a medical professional to design a brace specifically to meet the needs of the patient. Available components a waist belt with a joint for a suspension aid, a foam-lined polyethylene formed hip section, a standard quad brim thigh section, a short thigh for tibial plateau fractures, PTB style tibia, standard tibia, a sin
The MFP Colles' Fracture brace is a fracture orthosis made of low density, moisture resistant, perforated polyethylene plastic. This foam-padded brace maintains fracture alignment, permits joint mobility, and permits early return to normal functional activities. This orthosis consists of a dorsal section and volar shell extending from MP joints to elbow and secured with two Velcro straps that allow adjustable compression pressure. Designed to be fit to individual patients, the brace positions th
The MFP Functional Humerus Fracture Brace is a fracture orthosis made of moisture resistant, foam padded, perforated low density polyethyleneplastic. This brace maintains fracture alignment, permits joint mobility, and permits early return to normal functional activities. The orthosis consists of anterior and posterior shell that fit on upper arm from axilla to elbow and are secured with two Velcro straps that allow adjustable compression pressure. Available for the right or left arm and designe
The MFP Tibia Fracture Brace is a two-part functional fracture brace made of moisture resistant, perforated low-density polyethylene plastic with foam padding on the anterior shell. The brace maintains fracture alignment, permits joint mobility, and permits early return to normal functional activities. The system comprises an anterior shell and a posterior shell. Four adjustment straps allow custom fitting and soft tissue compression. The brace extends from below the knee to the malleoli and can
The MFP Ulna Fracture Brace is a fracture orthosis made of moisture resistant perforated plastic. This brace maintains fracture alignment, permits joint mobility, and permits early return to normal functional activities. The unit consists of dorsal and volar shells that fit on forearm from the elbow to the wrist and are secured with two Velcro straps that allow adjustable compression pressure. This brace provides for unobstructed radiographic readings and can be removed by patient for hygiene or
The Orthocare Modular Dynamic Elbow Extender is an elbow extension orthosis or flexion contracture orthosis. This 3-point pressure system consists of a bicep cuff, forearm cuff, elbow pad, and aluminum side bars. The cuffs are made of ABS plastic and are flanged and padded to help prevent pressure sores, and swivel to distribute pressure evenly. The cuffs are attached to aluminum side bars by leather straps. The elbow pad is leather with stainless steel buckles. The elbow strap is adjustable for
The Orthocare Modular Dynamic Knee Extender is a knee extension orthosis and flexion contracture splint with a 3-point pressure system consisting of 2 posterior cuffs, one behind the thigh and one behind the calf, connected by adjustable length aluminum side bars and connected to a knee pad by leather straps. The cuffs are made of ABS plastic and are flanged and padded to help prevent pressure sores and swivel to distribute pressure evenly. The aluminum side bars are pre-drilled for length adjus
The Over the Shoulder Humerus Fracture Brace is a two-piece fracture orthosis designed to provide immobilization and protection of the shoulder. Made of low-density, foam-lined, perforated polyethylene plastic, this brace features an overlapping clam shell design to enable it to be worn on the right or left arm. The overlapping shells allow for ease of adjustment to accommodate volumetric tissue changes. Two presewn cotton stockinette liners are included. SIZES: Small, medium, large, and extra l
Pedi-Wraps Arm Immobilizers are soft arm immobilizers designed to prevent children from reaching their faces after surgery, to prevent them from removing nasogastric tubes or IV lines, to prevent injury due to muscle spasms, or to provide stabilization during therapy. Made of soft, padded material, the wraps begin just below the shoulder and extend below the wrist. Models are available with and without thumbholes and all sizes except preemie and newborn include a shoulder strap. Models with thu
Pedi-Wraps IV Wraps are soft arm immobilizers designed to prevent children from removing IV lines. Made of soft, padded material, the wraps fit either arm and are designed to be used with Pedi-Wraps Arm Immobilizers (not included) and a shoulder strap. SIZES: Small, medium, and large. COLOR: Available in a variety of children's prints.
Pedi-Wraps Plus Arm Immobilizers are soft arm immobilizers designed to prevent children from reaching their faces after surgery, to prevent them from removing nasogastric tubes or IV lines, to prevent injury due to muscle spasms, or to provide stabilization during therapy. Made of soft, padded material, the wraps begin just below the shoulder and extend below the wrist. These wraps are two inches wider than the standard Pedi-Wraps Arm Immobilizers (see separate entry) to fit heavier children or
The Pediatric Tibial Fracture Brace is a knee ankle foot orthosis designed for use with children and adults with lower extremity fractures or disabilities. Avaiable for the right or left leg, this prefabricated functional brace is made of lightweight thermoplastic and can be modified with a heat gun. The design allows for dorsiflexion/plantarflexion of the ankle. The included shoe insert has hook-and-loop attachments for precise fitting and adjustable hook-and-loop straps on the remainder of the
The Primacare Padded Cardboard Splint, 12 Inch is an arm and leg splint designed for use by individuals with upper or lower extremity disabilities. Designed to conform to the contours of the limbs, this splint allows fractures to be splinted in one step. This splint is made of corrugated cardboard with half-density cushioning foam, three-quarter inch punch holes for tie down, and permanent padding that eliminates the need for additional fillers. The orthoses is lightweight and radiolucent and MR
The Rolyan Polypropylene Stockinette is an orthosis liner designed for use under splints and casts to reduce the risk of skin maceration. The stockinette is made from polypropylene material. DIMENSIONS (WxL): Model A434-2 is 2 inches x 11 yards; model A434-3 is 3 inches x 11 yards; and model A434-4 is 4 inches x 11 yards.
The Rolyan Preformed Brace is a fracture orthosis designed for use by individuas with upper extremity disabilities to support fractures of the humerus shaft. Made of Polyflex II (see also separate entry), both the Humerus and Ulna brace comes with two D-ring closure hook-and-loop straps and is similarly designed to support injuries or fractures of the ulna and humerus. SIZES: Both braces come in small, medium, or large.
The SAM Splint is a multi-purpose splint designed to immobilize arms, legs, fingers, or thumbs. Available in sizes to accommodate adults and children, this splint, also known as the Pocket Cast, can be used to immobilize any area of the body (including the neck) except the femur. Lightweight and waterproof, this splint can be folded or rolled and is invisible on x-rays. The 36-inch SAM is a universal splint that can be cut or folded to accommodate any need. The 18-inch SAM, also known as the SA
The Sarmiento Style Tibia Fracture Brace Proximal Support is a functional fracture brace made of moisture resistant, perforated low-density polyethylene plastic with foam padding on the anterior shell. This brace features overlapping anterior and posterior shells, politeal/hamstring relief for comfort while sitting, and a proximal cinch strap for patella support. Adjustment straps allow custom fitting and soft tissue compression. The brace extends from above the knee to the ankle and can be remo
The Shoulder Guard Over the Shoulder Humerus Fracture Brace is a fracture orthosis designed to provide protection of the deltoid area while allowing functional range of motion of the shoulder and elbow. Made of low-density, foam-lined, perforated polyethylene plastic, this brace is available in models for the right and left arm and features an extended posterior shell. It also features overlapping anterior and posterior shells enabling ease of adjustment to accommodate volumetric tissue changes.
The Sleeve for Dynafoam Elbow Extension Tube is an optional cover for the elbow and knee extension tubes (see separate entry) and is designed to aid in maintaining full extension. This flat sheet is made of polyethylene and slips under the cinch straps on the extension tube. The sleeve wipes clean. DIMENSIONS: Sleeve is 13/64 inches thick. SIZES: Small (##1136, ##1139), Medium (##1137, ##1140), and Large (##1138, ##1141) for knee or elbow extension tubes, or Extra Large (##1142) for knee extensi
This shoulder wrap is designed to stabilize the shoulder joint for a time period long enough for the joint to heal. It is a universal product, meaning it can be used on both the left or right shoulders. Removable soft gel insert stays cold for an extended period of time. Ergonomically designed elastic strap allows adjustment for many sizes. Provides compression for deep tissue therapy.
The Thermoskin Arm Sling, model 80631, is an arm sling designed to provide support and elevation for individuals with arm and wrist-related injuries or disabilities. The user’s arm is placed in the pouch and the shoulder strap is adjusted so that the arm in resting in a comfortable position. The arm sling is reversible for either arm. SIZE: One size fits all. COLOR: The pouch is blue.
---- PROTOTYPE --------- PURPOSE: To create a prototype of a self-powered exoskeleton arm orthosis for individuals with upper extremity and neurological disabilities. The Titan Arm is an untethered, self-powered exoskeleton arm that can be constructed for less than $2,000. To wield this device, users attach the cable-driven mechanical appendage to one arm of the user with straps from a military-grade hiking backpack. It is controlled with a thumbstick on a nunchuck-like controller. If a load nee
Urias Pressure Splints, model 3821 Series, and model 3823L, are inflatable hand and ankle foot orthoses and wrist and forearm splints designed for therapy and proper limb positioning for use by adults with upper or lower extremity disabilities, neurological disabilities, or cerebral palsy. Designed to inhibit spasticity, assist movement patterns, expedite weight bearing and reduce edema, each splint consists of a double layer of washable PVC sheeting and features a plastic zipper closure for eas
The Versi-Splint Kit is a modular shin support, fracture orthosis, and wrist and forearm splint designed to provide support for injured or broken arms, hands, or legs. The kit includes 6 large and 2 small reusable, foam-padded ABS plastic splints with stretchable elastic straps for positioning or attaching splints to each other to create larger units or to create configurations to accommodate specific injuries. The kit includes a carrying bag. DIMENSIONS: Large splints are 11.5 inches long and s
The Wheaton Pedi-Walker is a lower extremity fracture orthosis designed for wear by children and adults with lower extremity fractures. Available for the right or left leg, this polyethylene brace is equipped with adjustable hook-and-loop closure straps and can be removed for skin care and adjusted to accommodate changes in swelling. SIZES: Size 1 fits feet 5.5 inches long, size 2 fits feet 6 inches long, size 3 fits feet 6.5 inches long, size 4 fits feet 7 inches long, size 5 fits feet 7.5 inch
The Wheaton Wrist Fracture Braces are upper extremity fracture orthosis designed for wear by children and adults with upper extremity fractures. Available for the right or left arm, these polyethylene braces are available with or without thumb control and are equipped with adjustable hook-and-loop closure straps. They can be removed for skin care or adjusted to accommodate changes in swelling. SIZES: Extra extra small (for children 5 to 7 years old), extra small (for children 8 to 9 years old),
The Wilmington Robotic EXoskeleton, also called WREX, is a functional upper limb orthosis designed to enhance movement for individuals with neuromuscular disabilities of the upper extremity, including cerebral palsy, spinal cord injury (SCI), multiple sclerosis (MS), and amyotrophic lateral sclerosis (ALS). Its lightweight exoskeleton approximates normal human anatomy. Linear elastic bands are used both for balance and to assist movement in three dimensions against the effects of gravity. These
The WrisTimer PM is a wrist support orthosis designed for use by individuals with carpal tunnel syndrome or other wrist or hand pain. Designed to be worn at night, this wrist support is intended to reduce pressure on the median nerve during sleep. Made of foam padding, this device conforms to the hand, wrist and forearm as it holds the wrist in a neutral position to reduce inflammation. Dorsa application prevents damaging of flexion of the wrist. Features include a Velcro adjustable strap for a