Furniture

Results: 1078

10-Inch Siderail Bags (Model 70400)

The 10-inch Siderail Bags, model 70400, are bed pouches designed to provide a small storage area for reading glasses, paperback books, a TV remote control unit, refreshment bottles, telephone, etc. They may also be used as bedside litter caddies. The opening is made of a spring hex frame which requires very little manual dexterity or strength to operate. Opening the bag is achieved by placing the fingers in the middle of the frame and popping it outward; by pushing on the outside of the frame, t

2-Way Lift Chair (Model 70556)

The 2-Way Lift Chair, model 70556, is a seat lift chair and recliner designed for use by individuals with mobility disabilities. This two-position chair features quiet and smooth lift and recline. With a touch of a button the chair lifts the user up. A built-in emergency battery back-up allows the chair to return to the sitting position in the event of a power outage. POWER: Uses household current; the backup uses 9-volt batteries (not included). DIMENSIONS (HxW): The chair is 43 x 29 inches. Th

3-Inch Rock-N-Stop Footrest

The 3-Inch Rock-N-Stop Footrest is a footstool designed for use by individuals with lower extremity, circulatory, or back disabilities who spend long periods sitting at a desk. The unit is designed to promote proper positioning of the feet while sitting to reduce strain on neck and back muscles. The Rock-N-Stop features corrugated rubber rockers that allow for smooth motion as well as steady positioning at a desired footrest angle, a platform constructed of MDF covered with durable vinyl, and ch

5 Position Bariatric Expanda-Bed

The 5 Position Bariatric Expanda-Bed is a motorized bed designed for use by individuals with obesity and severe physical disabilities or spinal cord injury. This bed features head and foot elevation, Trendelenberg position, seat up and down, and adjustable bed height. It has single button controls for cardiac chair position, return to supine, and Trendelenberg operation. Trendelenberg operation may be used without having the bed either fully up or fully down. The bed has Steer-Lock casters, and

6-Inch Rock 'n Stop Footrest

The 6-Inch Rock 'N Stop Footrest is a footstool designed for use by individuals with lower extremity, circulatory, or back disabilities who spend long periods sitting at a desk. The unit is designed to promote proper positioning of the feet while sitting to reduce strain on neck and back muscles. The Rock 'N Stop features corrugated rubber rockers that allow for smooth motion as well as steady positioning at a desired footrest angle, a platform constructed of MDF covered with durable vinyl, and

6919 Positioning Pillow

The 6919 Positioning Pillow is a body positioner and infant positioning cushion made of a foam blend. Small squares of foam fill an inner pillow case made of vinyl, which is covered with an outer pillowcase that zips off for washing. SIZES: Small or Large. DIMENSIONS: 20 x 20 inches (small) and 32 x 20 inches (large). COLOR: Forest green.

Able Generation Basic Play Chair

The Able Generation Basic Play Chair is a youth positioning chair designed for use by children with physical disabilities. This wooden chair features a moveable seat which can be angled and adjusted to any height within a specified range. The seat can be lowered so the child's legs rest on the floor, enabling supported floor play. The chair includes a nylon seat belt and pads. OPTIONS: An optional footrest and tray (sold separately) are available for the regular chair. A therapeutic back insert

Able Generation Module A Play Chair

The Able Generation Module A Play Chair is a youth positioning chair designed for use by children with physical disabilities who have adequate head control and early sitting skills. This wooden chair features a moveable seat which can be angled and adjusted to any height within a specified range. The seat can be lowered so the child's legs rest on the floor, enabling supported floor play. The chair includes a nylon seat belt, pads, a flat insert back, and a pommel. OPTIONS: An optional footrest

Able Generation Module B Play Chair

The Able Generation Module B Play Chair is a youth positioning chair designed for use by children with physical disabilities who require additional trunk support. This wooden chair features a moveable seat which can be angled and adjusted to any height within a specified range. The seat can be lowered so the child's legs rest on the floor, enabling supported floor play. The chair includes a nylon seat belt, a winged insert back, one- or two-inch side leg pads, and a pommel. The winged back inser

Able Generation Module C Play Chair

The Able Generation Module C Play Chair is a youth positioning chair designed for use by children with physical disabilities who require full back, head, and trunk support. This wooden chair features a moveable seat which can be angled and adjusted to any height within a specified range. The seat can be lowered so the child's legs rest on the floor, enabling supported floor play. The chair includes a nylon seat belt,height-adjustable legs, a therapeutic insert back, a choice of one- or two-inch

Able Generation Play Table

The Able Generation Play Table is a cut out table designed for use by children with physical disabilities. This wooden table enables the child to be surrounded on three sides, stabilizing the arms and aiding in focusing the attention. The table tilts to five, 15, or 25 degrees. A lip on the inside and outside edges minimizes the possibility of small items, books, and papers sliding off the table when the top is tilted. This table may also be used during floor sitting or supported standing. OPTIO

Able Table

The Able Table is a height-adjustable tilt-top work table and overhead bookholder designed for use by individuals who use wheelchairs or eith severe physical disabilities or spinal cord injury. This unit lifts books for eye-level or overhead reading within a range of 9 to 18 inches high. Springs provide the lifting power. The unit is designed so that the book will stay where placed: up or down, left or right, at any angle without adjustment of knobs or levers. A single knob locks the top in plac

Ableware 706010000 Laptop Wheelchair Desk

Laptop Wheelchair Desk is designed for people that use a wheelchair. Roomy storage beneath the lid for lap top computers, business files, and personal items. Durable plastic clip on the inside of the lid holds books and newspapers open. Adjustable lid tilts forward for reading and writing; lies flat for lap top use and other activities. Tray top recesses securely hold paper clips, cups, cell phones, pens, etc.

Ableware Ablerise Bed Rail

ABLEWARE AbleRise Bed Rails are side rails designed to provide support for individuals with mobility disabilities as they enter and exit the bed. Available in a single model and a double model, the base of these rails installs between the mattress and the box springs. The rails are height adjustable and feature storage pockets. DIMENSIONS: The rails are 20 inches wide. The space between the handles on the double model adjusts from 7 to 17 inches. The unit extends 39.25 inches under the mattress

Accella Series (Models 6030, 4830 & 6024)

The Accella Series, models 6030, 4830, and 6024 are computer work centers and height-adjustable work tables designed for use by individuals who use wheelchairs. The height adjustment, which is accomplished using the built-in hand crank, also provides access for individuals who stand or use standing aids while working. The hand crank is located underneath the tabletop and folds out of the way when not in use. The standard table has a laminate top, anodized aluminum pedestal, and steel feet. OPTIO

Access Stairs

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted set of stairs to access a bed for a child with cerebral palsy, developmental delay, and vision and hearing impairment. The child required a raised bed with side railings to keep her safe at night, but it had to be easily accessible without caregivers having to bend over when caring for the child. The bed is 880 millimeters above the floor and has fixed railings on three sides; the railing on the fourth side slides up and do

Ache-No-More Pillow

The Ache-No-More Pillow is a cervical pillow designed for use by individuals with neck pain, injury, or disability. Made of hypo-allergenic foam, the pillow is designed to align the head, neck, and spine during sleep. The pillow combines a cervical roll with a soft foam surface and has a zippered cotton/polyester cover. DIMENSIONS (LxW): 20 x 15.5 inches. WEIGHT: 1 pound.

Acid Reflux (Ar) Pillow For Babies And Infants & Deluxe Ar Pillow For Babies And Infants

The AR Pillow for Babies and Infants is a wedge pillow designed for use with babies with gastric reflux or eating and digestive disabilities. This pillow includes a quilted poly/cotton harness and head ring to hold a newborn safely and maintain a 30-Degree angle, the optimal angle to relieve acid reflux, gastroesophageal reflux, Barrett's Syndrome, post surgical conditions, etc. naturally. The head ring is attached under the cotton pillow sheet with Velcro to the pillow surface. The quilted pill

Active Foot Rest

The Active Foot Rest is a footstool designed for use by individuals with lower extremity and back disabilities. Designed with a sturdy plastic frame, this footstool adjusts to three different heights to provide optimal positioning. DIMENSIONS: The height range is 2.75 to 6.75 inches. COLOR: Black, blue, red, or white.

Active Life Station

The Active Life Station is an accessible table designed for use with children and adults with severe cognitive, emotional, or physical disabilities who require constant supervision. This table system surrounds the user on all sides, with one side being a secure access door. The individual's wheelchair or feeder seat is positioned on a 360-degree rotating base in the center, enabling the user to access table surfaces on all sides. The station can be used for watching television, using a computer,

Activity Tray

The Activity Tray is a height adjustable tray designed for use by people with upper extremity, fine motor, grasping or neurological disabilities or conditions such as multiple sclerosis, cerebral palsy or Parkinson's. Made of rugged ABS, the Activity Tray can be set at any of 4 available heights by pulling the easy-open handle. The tray has two recessed cutouts for placing mugs or cups and can be used to place food and drink closer to a person's mouth. The Activity Tray can be reversed so that

Ada Compliant Wheelchair Accessible Desk (Model 876)

The ADA Compliant Wheelchair Accessible Desk, model 876, is a height adjustable classroom desk designed for use by children who use wheelchairs. This table has a polyester powdercoated frame, nickel-chrome plated legs, and either a fiberesin-laminate or plastic desktop. The telescoping legs are adustable by sliding the lower leg inserts into the upper legs and tightening a set screw. The lower leg inserts have adjustable nylon glides and optional locking wheels. DIMENSIONS (LxW): The table top i

Adapted Crib

CUSTOM ADAPTATION PURPOSE: To enable an individual with spinal cord injury to care for her infant as independently as possible. A standard wooden crib with drop sides was adapted. First, extensions were added to the legs to provide clearance for the wheelchair to roll under the crib. The extensions were secured with screws so that thee can be removed if necessary. Next the front drop side was removed and cut in half to provide two center opening gates. After the front corner posts were reinforc

Adapted Desk.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Desk designed and modified by someone with cerebral palsy so he could store items where they are easy for him to reach and to hold books for reading. Made from single pedestal desk 48 by 30 inches wide with legs shortened. Bookcase made of 3/4 inch hardwood with two shelves. Two tilted wooden trays, extended across the desk, are used as bookholder. SKILLS REQUIRED: Woodworking. TITLE: Adapted Desk JOURNAL: Accent on Living REF: Vol 30 No 1, Summer 1985

Adapted Dining Chair

CUSTOM ADAPTATION PURPOSE: To provide seating with sufficient postural support to enable a young adult with Down syndrome to eat at a dining table. An existing dining room chair was adapted for this purpose by adding seat inserts. The padded back and seat inserts were built from 12-millimeter plywood and covered with fabric-covered foam. The seat insert was attached to the chair seat using screws and the back insert was attached with webbing straps, two around the back of the chair and one unde

Adapted Grab Bar For An Armchair.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Grab bar to assist person in standing up from upholstered armchair. Two metal strips attach to side frame of armchair. Two steel pipes form the bar. One attaches vertically to the metal strips. The second, horizontal bar attaches to the vertical one. A specially fabricated joint allows the horizontal bar to pivot or to lock in position, providing a stable hand grip. Measurements determine the optimum distance from chair for vertical bar and the optimum

Adaptor Air Spring Padding

Adjustable pre-inflated air cushioning interface for use on any surface to enhance soft tissue protection and provide shock absorption. Self contained sealed air cells may be cut apart in sections to fit flat or contoured surfaces where shock, impact absorption, shear or friction protection is required. Flame resistant. Neoprene rubber. Washable with soap and water. 10 by 14 inch sections with grid of 70 one inch square cells. .

Add-On Table

CUSTOM ADAPTATION PURPOSE: To provide a dining table for a young woman with mobility disabilities. The add-on table is made of a 5/8- inch plywood and resembles a card table with only two legs. The front edge of the table is attached and removable from the main dining room table with two sturdy hooks. The height of the table has been lowered to a more comfortable level and a semi-circle has been cut out to fit the young woman’s waist, allowing her to get up close. TITLE: The Add-on Table. WEBSI

Adjustable Bed

Adjustable bed includes Serta mattress. Automatic variable speed controls and timer for massage feature. High or low elevations. Pendant control for elevating back of bed and knee section. Twin extra long (38 by 80 inches), double, queen or dual king sizes. Detachable side rails available. Optional massage system. Serta mattress: 15 year warranty. Bed: 5 year in home service warranty. .

Adjustable Bed Rails

The Adjustable Bed Rails are side rails designed to keep individuals with physical disabilities from falling out of bed or individuals with cognitive disabilities from leaving bed without assistance. The rails can also aid the individual in turning in bed. Available singly or in pairs, the rails have three steel tube bars and the base fits between the mattress and box spring or bed frame. The units disassemble to lie flat for transport or storage. DIMENSIONS: The tube rails are one inch in diame

Adjustable Blanket Support

The Adjustable Blanket Support is a blanket support designed for use by individuals who cannot bear the weight of blankets on their feet or who have sensitive skin. The support is intended to provide relief from pain and irritation caused by diabetes, bunions or ingrown toenails, neuropathy, fibromyalgia, gout, injuries or surgery, and other foot conditions. Made of lightweight aluminum with a brass finish, this support blanket has a wide base that fits securely between the mattress and box spri

Adjustable Blanket Support

The Adjustable Blanket Support is a lightweight blanket support designed for use by individuals who cannot bear the weight of blankets on the feet or who have sensitive skin. The aluminum Support features a base that inserts between the nattress and the box springs to support a rectangular loop which keeps sheets and blankets off the feet. The frame folds to the mattress when not in use. DIMENSIONS: The frame is 20 inches long and the height adjusts up to 19 inches.

Adjustable Commode Chair

Adjustable Commode Chair is designed for use by individuals who have difficulty getting to and/or using regular toilets as a result of limited lower extremity mobility associated with an injury, stroke, heart disease or muscular dystrophy.  It is a commode chair with a metal frame that can be adjusted in height to accommodate the user. The removable seat contains a plastic commode pan and lid with carrying handle.

Adjustable Desk With Storage

The Adjustable Desk With Storage is a height adjustable desk designed for use by individuals who use wheelchairs. This desk has a large work surface with a curved cutout for accessibility. An attached vertical storage shelf/box is located on the side to provide knee space. The height adjusts using a knob-style column lock on the legs. DIMENSIONS (LxW): The top measures 40 x 24 inches. The height adjusts from 23 to 33 inches. COLOR: Maple finish laminate top with almond powder-coated base. WARRA

Adjustable Floor Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Floor table adjusts to set work area at proper height and angle for child. Plywood table with 12 inch by 18 inch top. Upper side panels measure 8 inches by 12 inches; lower side panels measure 10 inches by 12 inches. Double side panels allow user to adjust height and angle. Softwood edge can be added around front and top sides. A cutout can also be added. To determine the correct size and shape of the cutout, bend a piece of coat hanger or other soft w

Adjustable Foot Rest

The Active Foot Rest is a footstool designed for use by individuals with lower extremity and back disabilities. Made of heavy-gauge steel with 3M Safety-Walk slip-resistant material on the extra-wide platform, this footstool features independent height and angle adjustments for optimal positioning. DIMENSIONS: The platform is 22 inches wide.

Adjustable Footstool

The Adjustable Footstool is a footstool designed for use by individuals with lower extremity disabilities. Intended to support proper posture and relieve stress on legs, this height-adjustable footstool allows the user to choose his or her desired level of comfort based on height. The frame is made of wood and the foot platform is covered in faux sheepskin. The unit folds when not in use. DIMENSIONS: 14 x 14 x 18 inches. The height can be set at 17 inches, 14.5 inches, or 11.5 inches.

Adjustable Height Individual Cut Out Work Table (Model 372)

The Adjustable Height Individual Cut Out Work Table, model 372, is an adjustable height work surface with a large cutout and raised rim on 3 sides. The legs are made with chrome plated steel. Top is 24 by 24 inches with 12 by 15 inch cutout. Height adjusts from 22 to 35 inches. Other size cut outs are available on request at additional cots.

Adjustable Height School Desk (Model 370)

This is an adjustable height functional school desk for wheelchair students. The features include a cut out that permits close access and a large working space. A bookholder under right side of the table is available for storage. The desk legs are made of chrome plated steel and plastic adjustable glides are attached to the legs for uneven floors. The surface is wood grain laminated and scratch resistant. DIMENSIONS: height adjusts from 24 to 34 inches, top 40 x 24 1/2 inches, cut out 9 x 14 inc

Adjustable Height Stool

These Adjustable Height Stools, are available in round or contour seats style. Stools without back supports are standard though stools with back supports are an options. Features include upholstered vinyl seat, casters, rubber tip feet and a steel frame.

Adjustable Height Tilt Top Work Table (Model 371)

This tilt top table is adjustable and functional for wheelchair students. The offset cut out allows close access and a large working space for the student. A bookholder on the right side has amble space for storage. The legs are chrome plated steel. DIMENSIONS: height adjusts 25 to 29 inches, top tilts to a 45 degree maximum, the cut out is 9 x 14 inches, 27 inches exist between legs and the book holder.

Adjustable Leg Work Table (Models 42-254/3D, 42-255/0D, & 42-256/8D)

Adjustable height work table. Laminated plastic top table on 1 1/8 inch thick high density particle board. Height adjusts 22 to 30 inches in 1 inch increments. 2 tubular steel legs with supports. Variety of table sizes.

Adjustable Table And Chair For Child

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To provide a custom adaptation of the Rawson Adjustable Chair and Table for a child with spinal muscular atrophy type II. Made to dimensions to suit each individual client, the Rawson provides seating for children who need to maintain an upright and stable posture. The seat, armrest and table height can be adjusted in 25 millimeter increments so the child can have the optimum position for play, eating and learning activities over several years. For e

Adjustable Tilt In Space Chair (Models Ts13-Lb, Ts13-Hb, Ts15-Lb, Ts15-Hb, Ts17-Lb & Ts17-Hb)

The Adjustable Tilt in Space Chair is a youth positioning chair designed for use by children with mobility or neurological disabilities. The chair adjusts to meet the specific needs of each individual as he/she grows, changes, and develops. It features locking casters; adjustable-height footrests; seat cushion with slight anti-thrust wedge; back pad; adjustable hip and trunk guides; and a seat belt. The chair can be adjusted from fully upright to approximately a 40-degree tilt. The footrest, sea

Adjustable Wooden Bed Tray (Model Ha-4801)

The Adjustable Wooden Bed Tray, model HA-4801, is a bed tray designed for use by individuals with mobility disabilities. This table has legs that fold out to allow the tray to be placed across the lap. The tray is adjustable to five different angles for reading, writing, and other activities, and it is laminated to allow easy cleaning. DIMENSIONS: 480 x 340 x 20 millimeters. WEIGHT: 1.5 kilograms.

Adjustable Work Carrel.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Work carrels, one with an adjustable work surface, the other with a hinged work surface to allow variation in placement including people needing to use their feet. Three sided carrel with adjustable height horizontal surface. A second version has a segmented hinged work surface to allow additional variations. Detailed assembly drawings are shown. They have been represented in a very small font. Contact developer for larger prints. COMMENTS: For additio

Adjustacart

The AdjustaCart is a height adjustable desk or computer work center designed to be configured for the user's needs. This desk features a control pad which, when squeezed, raises or lowers the worksurface to the desired level. The cart is consists of 16 gauge steel legs and supports with industrial-grade particle board shelves and soft rubber, twin-wheel castors. Pre-drilled holes allow the shelves to be placed as desired. The open design allows access to both the front and back of the cart, and

Adult Genuine Leather Jumbo Bean Bag Chair

The Adult Rainbow Vinyl Bean Bag Chair is a bean bag chair designed for use by individuals with cognitive or emotional disabilities or autism or with marginal or developing trunk control. This chair is filled with 11.5 cubic feet of soft polystyrene fill for extreme comfort and is refillable when needed. The pear-shaped design offers both back support or rounded appearance as needed. Features include double stitched seams for added strength and an auto-lock zipper for safety and durability. The

Adult Rainbow Vinyl Bean Bag Chair

The Adult Rainbow Vinyl Bean Bag Chair is a bean bag chair designed for use by individuals with cognitive or emotional disabilities or autism or with marginal or developing trunk control. This chair is filled with 11.5 cubic feet of soft polystyrene fill for extreme comfort and is refillable when needed. The pear-shaped design offers both back support or rounded appearance as needed. Features include double stitched seams for added strength and an auto-lock zipper for safety and durability. DIM

Adult Vinyl Bean Bag Chair

The Adult Vinyl Bean Bag Chair is a bean bag chair designed for use by individuals with cognitive or emotional disabilities or autism or with marginal or developing trunk control. This chair is filled with 11.5 cubic feet of soft bean bag fill and is refillable when needed. The pear-shaped design offers both back support or rounded appearance as needed. Features include double stitched seams for added strength and a double-zippered for safety and durability. DIMENSIONS: 30 x 30 x 30 inches with

Aeroflow Ii Static Air Mattress (Models Msc061000 & Msc061002)

The Aeroflow II Static Air Mattress is an air mattress designed for use by individuals at risk for pressure sores / decubitis ulcers. This mattress is made of 16-gauge vinyl, and deflates instantly when an emergency release strap is pulled. It is latex-free and fits any size bed. It comes with an inflation indicator, and is available with a hand pump (model MSC061000) or without a hand pump (model MSC061002). DIMENSIONS (LxW): 76 x 34 inches when inflated.

Air Support

The Air Support is a bariatric air mattress designed for use by individuals who are at risk for pressure sores/ulcers and are obese. The mattress operates in alternating or static low-air Loss modes. The alternating mode features one-in-three alternation. The quilted top cover is waterproof, vapor permeable, and machine washable. The mattress features twenty reinforced inflatable cells. The mattress deflates quickly for CPR function and the mattress system is completely replaceable. Digital tech

All Electric Rehabilitation Bed (Model Bg33)

Motorized bed. Removable laminate headboard and footboard. Cold roll steel frame. 5 inch casters with 2 positive locking treads. Four post telescoping leg construction allows straight line, straight line Trendelenburg and reverse Trendelenburg positions, high cardiac chair and postural drainage position, elevated head and knee positions. Nurse controls located at foot end of bed. Options: patient control pendant, revolving side rails, deluxe casters, traction, and trapeze. Bed 89 3/4 inches by 3

All Purpose Table (Model F712)

The All Purpose Table, model F712, is a bed tray with a tilt top that will fold flat. It has clips for holding books or papers, and a laminated top with a lip at the front edge. DIMENSIONS: 12 x 18 x 17 inches.

Aller-Ease Cotton Comfort Pillow Encasement

The Aller-Ease Cotton Comfort Pillow Encasement is a pillow protector designed for use by individuals with allergies or respiratory disabilities. This product is made of tightly woven cotton that provides protection from microscopic particles and pollen that commonly trigger allergy and asthma symptoms. It protects as a level of 5-7 microns, has a zippered closure, and is machine washable. SIZES: Standard, queen, and king.

Aller-Ease Cotton Mattress Encasement

The Aller-Ease Cotton Mattress Encasement is a mattress protector designed for use by individuals with allergies or respiratory disabilities. This product is made of tightly woven cotton that provides protection from microscopic particles and pollen that commonly trigger allergy and asthma symptoms. It protects as a level of 5-7 microns. This mattress protector has a zippered closure, and it is machine washable. SIZES: Twin, full, queen, and king (fits mattresses with depths up to 15 inches).

Allexton Rigid Blanket Cradle (Model 138)

The Allexton Rigid Blanket Cradle, model 138, is a blanket support designed for use by individuals at risk for pressure sores/ulcers. Constructed from plastic coated steel tubing, this device is a continuous closed loop, with one end of the loop being placed between the mattress and bed base. The weight of the bed clothes is supported, keeping them clear of the patient for ventilation and pressure relief. DIMENSIONS (WxHxL): 11 x 19.5 x 17.25 inches. COLOR: White.

Alvin Reflex Table

The Alvin Reflex Table is a height-adjustable tilt top work table designed for use by individuals who use wheelchairs. This table has a wide, open base and telescoping legs with easy-grip height-adjustment knobs. The large Melamine top is angle-adjustable from zero to 45 degrees and features a PVC rim to prevent items from rolling or sliding off. A half-circle cut-out provides access for wheelchair users. This table folds flat for storage. DIMENSIONS: The top is 30 x 40 inches. The height adjust

Anthrocart

The AnthroCart is a computer work center or height adjustable desk designed to be configured to meet the user's needs and provide ease of access. The AnthroCart is consists of 16 gauge steel legs and supports with industrial-grade particle board shelves and soft rubber, twin-wheel castors. Pre-drilled holes allow the shelves to be placed as desired. The open design allows access to both the front and back of the cart, and front locking casters prevent rolling when mobility is not required. OPTIO

Anti Decubitus Mattress Pad With Anchoring Hitch.

The Anti Decubitus Mattress Pad with Anchoring Hitch is a polymer floation mattress surface. The pad has an attachment system that allows it to be secured in its position on the bed. The hitch attaches to the bedframe at the head with Velcro straps, and stays attached to bed. The pad also has a Velcro backing that attaches to the hitch that can be removed for cleaning, etc. The mattress pad is filled with AKTON, a dry viscoelastic polymer, to help reduce the incidence of pressure sores.

Anti-Snore Pillow

The Anti-Snore Pillow is an anti-snoring pillow designed for use by individuals with respiratory disabilities. Intended to position the head and neck to keep air passages open, this pillow has a built-in air chamber in the center that allows adjustable support to keep the user off his or her back while sleeping. The air chamber can be inflated to the desired height with a connected tube. The curved pillow is made of natural latex foam flocks that regulate moisture and warmth. The Euro soft cotto

Apm-5000 Therapy Pump Air Loss Mattress System

The APM-5000 Therapy Pump Air Loss Mattress System is an air flotation mattress designed for use by individuals with circulatory disabilities and pressure sores or ulcers. The complete set is waterproof. The nylon and tpu materials have a ventilitation effect, which relaxes pressure caused by muscle tenderness. The pump includes an illuminated on/off switch; a low pressure, air loss light; and a hook for attachment to the bed. The air output is 4.5 liters at 115 volts, and five to six liters a

Apm-8000 Therapy Pump Air Loss Mattress System

The APM-8000 Therapy Pump Air Loss Mattress System is an air flotation mattress designed for use by individuals with circulatory disabilities or pressure sores or ulcers. The complete set is waterproof. The nylon and tpu materials have a ventilitation effect, which relaxes pressure caused by muscle tenderness. The pump includes an illuminated on/off switch;a low pressure, air loss light; and a hook for attachment to the bed. The air output is 4.5 liters at 115 volts, and five to six liters at

Apollo Square Picnic Table - Wheelchair Accessible (Models T46Eb-3Sm & T46Eb-3S)

The Apollo Square Picnic Table - Wheelchair Accessible is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This square table is made of plastic-coated steel, with seats on three sides and space for a wheelchair on one side. The table has an umbrella hole in the center and is available in portable/surface mount (model T46EB-3SM) or inground frame (model T46EB-3S) models. OPTIONS: Aluminum mounting plates to hide mounting brackets and hard

Apollo Wheelchair Accessible Picnic Table (Models T9Ebrdcppsm & T9Ebhdcps)

The Apollo Wheelchair Accessible Picnic Table is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This rectangular picnic table has a single long table top with one long bench on one side and two shorter benches on the other, with space for a wheelchair between the two shorter benches. There is an umbrella hole in the center of the table top. The table is made of plastic-coated steel and is available with either a portable/surface mount

App Pump And Pad (Models P1210 & 1212)

The APP Pump And Pad is an alternating air pressure mattress surface with pump designed for use by individuals at risk for decubitis ulcers/pressure sores. The pad is available with either a fixed pump (model P1210) or an adjustable pump (model P1212). WEIGHT: 15 pounds. COLOR: Beige.

App-1000 Standard Pump And Pad System

The APP-1000 Standard Pump and Pad System is alternating air pressure mattress surface designed for use by individuals with circulatory disabilities and pressure sores or ulcers. It comprises a lightweight pump with front air output and a bubble pad of heavy- duty, bubble-textured PVC vinyl. The pump includes an illuminated on/off switch and includes a hook for attachment to the bed. The air output is 4.5 liters at 115 volts, and 5 liters at 230 volts. The cycle time is five minutes at 60 Hert

App-2000 Deluxe Pump And Pad System

The APP-1000 Deluxe Pump and Pad System is an alternating air pressure mattress surface designed for use by individuals with circulatory disabilities and pressure sores or ulcers. It comprises a lightweight pump with high capacity output and a bubble pad of heavy-duty, bubble-textured PVC vinyl. The pump features an adjustable pressure controal to accommodate the individual's weight. It also includes an illuminated on/off switch and a hook for attachment to the bed. The deluxe pump can be used

Arjo Pilot Lift Ride Chair

Person can be placed on seat while lying in bed, brought to sitting position and safety arm and backrest lowered around person. Some assistance from the person is needed. Lift is hydraulically adjustable, low base with casters. Seat can be lowered into elevating bathtub or used as commode seat for toilet. Bed pan holder attached. Stretcher can be attached to lift in place of seat.

Armchair Caddy

DO IT YOURSELF ENTRY --- PURPOSE: To enable individuals with mobility disabilities to organize items at an armchair. Included in a chapter entitled “Living Room & Leisure Activities,” this article provides detailed instructions with illustrations for making a simple three-pocket caddy from a decorative dishtowel or hand towel. The towel is folded in half with the decorated sides together, and then one side is folded back so the hemmed edges line up with the half fold, creating the pockets. A

Armchair Tray.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Tray to fit close to the body and rest on the arms of an armchair, held in place with elastic straps. Plywood tray about 18 inches deep and wide enough to fit across the arms of the chair, with extensions on the bottom to keep it from slipping sideways; an edge across the front; a semicircular cutout to fit around the body; and elastic car roof rack straps to keep it from slipping forward. Lists materials needed and provides instructions and drawings.

Artist's Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Adjustable angle table can be built to any height. Instructions for wooden table. Top is an adjustable angle easel. Frame can be built to any height including wheelchair accessible. Includes drawing and dimensions for materials. SKILLS REQUIRED: Woodworking TITLE: Dream Table for an Artist REF: Article: Sunset Magazine, February 1990, pp 124B-125. PAGES (including cover):2 1990.

Ascender 300, Ascender 500, & Ascender 1000 Hip Chair

The Ascender 300, Ascender 500, and Ascender 1000 Hip Chairs are geriatric chairs designed for use by individuals with arthritis or lower extremity disabilities. Features include a cradle-style extended headrest, a retractable footrest, a padded armrest, and an adjustable back with four back positions covering a range of approximately 90 to 70 degrees. The chair has interchangeable back and seat cushions of different thicknesses, which can be exchanged to change the seat height. OPTIONS: Leg sup

Ascender At Home Chair (Models 9000 & 9200)

The Ascender @Home Chair is a geriatric chair designed for use by individuals with arthritis or lower extremity disabilities. This chair has an A-shaped frame, a pitched back, high extended armrests, and an adjustable forward-sloping seat pan with 0, 5, or 10 degrees of slant. The seat- to-back angle is 70 to 90 degrees, depending on the slant seat position. DIMENSIONS (HxLxW): 44 x 29.5 x 25.5 inches (model 9000) or 44 x 29.5 x 29.5 inches (model 9200). The seat width is 20 inches (model 9000

Ascender Mp 300, Mp 500, Mp 1000, & Mp 1000 Plus Waiting Room / Office Chair (Models 8000, 8200, 8400, & 8600)

The Ascender MP 300, MP 500, MP 1000, and MP 1000 Plus Waiting Room / Office Chair are heavy-duty office chairs designed for use by individuals with lower extremity disabilities. These mission-style chairs have an adjustable back with four back positions covering a range of approximately 90 to 70 degrees. By flipping a lever on the side of the chair, the seat pan can be placed in a 10-degree forward slope. Other features include EZ Grip armrests and a blood-drawing armrest attachment. OPTIONS: E

Asl 4 Function Sip & Puff Bed Control (Model Asl704)

The ASL 4 Function Sip & Puff Bed Control, model ASL704, is a pneumatic bed control designed for use by individuals with cerebral palsy, neurological disabilities, or severe physical disabilities. This control interface for a four- function electric bed or semi electric bed comes with a visual four function display and a sip n' puff control.

Asl 6 Function Big Button Bed Control (Model Asl706)

The ASL 6 Function Big Button Bed Control, model ASL706, is a bed control designed for use by individuals with fine motor disabilities, cerebral palsy, or neurological or severe physical disabilities. This control interface for a six-function electric bed has six large push buttons. To operate, this unit interfaces with the ASL 703 Six Function Bed Control (not included; see separate entry). It allows each function to be accessed through the use of large mechanical buttons in place of the small,

Asl 6 Function Sip & Puff Bed Control (Model Asl703)

The ASL 6 Function Sip & Puff Bed Control, model ASL703, is a pneumatic bed control designed for use by individuals with cerebral palsy, neurological disabilities, or severe physical disabilities. This controller for a six-function electric bed allows full control of a hospital bed through the use of a sip and puff control system. A sip command selects the bed function desired and a puff command activates the choice. The bed control interface comes with a visual six-function display and sip

Asl Scanning 6 Function Bed Control With Single Switch Activation (Model Asl702)

The ASL Scanning 6 Function Bed Control with Single Switch Activation, model ASL702, is a bed control designed for use by individuals with cerebral palsy, neurological disabilities, or severe physical disabilities. This scanning six- function bed control for a full electric bed can be operated as a single function. The bed control unit comes with an ASL 300 egg switch and ASL300R ring mount.

Assist-A-Tray

The Assist-A-Tray is a transfer aid and a swiveling tray for an armchair or sofa designed for use by individuals with balance or mobility disabilities. The unit features a sturdy, ergonomically designed handle for assistance when getting in or out of a sitting position and a multi-use swivel tray with cup holder and utensil compartment. The unit can be used on the right or left side of a chair or couch and the base slides underneath the furniture. The base has four feet with rubber pads to ensur

At Ease Adjustable Chair (Models Ch10 & Ch20)

The At Ease Adjustable Chair, models CH10 and CH20, are office chairs with tilt in space designed to provide ergonomic comfort and prevent pain for individuals who sit a desk all day. The completely adjustable chair adapts in seven ways including: arm height adjustment, tilt tension control, forward tilt control, synchronous tilt control, seat height adjustment, back angle adjustment, and back height adjustment. It is available in two models: CH10 has arms and CH20 does not. COLORS: The fabric i

Attends Dri-Sorb Plus Underpads

Attends Dri-Sorb Plus Underpads are incontinence pads and bed underpads designed for use by individuals with urinary incontinence. They are intended to protect beds, chairs, and other surfaces. These pads are recommended for a variety of uses. Dri-Sorb Plus pads are made with super absorbent polymer and cellulose fibers for moderate absorbency. A soft cloth-like topsheet covers entire surface to protect the user's skin, and a leak-proof backsheet protects surfaces from fluid. These pads are late

Attends Night Preserver Underpad

The Attends Night Preserver Underpad is an incontinence pads and bed underpad for use by individuals with urinary incontinence. They are intended to protect beds, chairs, and other surfaces. These pads are intended for overnight use. They feature an additional super absorbent polymer and cellulose fibers for heavy absorbency. DIMENSIONS (WxL): 23 x 36 inches; 30 x 30 inches; 30 x 36 inches.

Attends Supersorb Breathables Underpad

The Attends Supersorb Breathables Underpad is an incontinence pad and bed underpad designed for individuals with incontinence. These pads are made with a super absorbent polymer that channels and locks fluids away from skin and helps prevent odor. A soft cloth-like topsheet covers entire surface to further protect the user's skin, and a leak-proof backsheet protects surfaces from fluid. The backsheet also is non-slip to prevent bunching or sliding. It is available with regular or maximum absorbe

Australian Hi Temp Ur Medical Sheepskin

Australian Hi Temp UR Medical Sheepskin is a decubitus pad designed for use by individuals at risk for pressure sores. These select Merino sheepskins reduce pressure, skin moisture and friction. These machine-washable natural shape sheepskins have been tanned for increased urine resistance. DIMENSIONS (LxW): 40 to 42 inches x 30 to 32 inches. The pile is 30 millimeterm or 1.25 inches. COLOR: Emerald Green.

Australian Medical Sheepskin

The Australian Medical Sheepskin is a decubitus pad designed for use by individuals at risk for pressure sores. The double-chrome tanned, high pile density Merino sheepskin is machine washable (up to 30 degrees Celcius). The soft, springy wool fibers of an Australian Medical Sheepkin absorb pressure from immobile limbs and joints, allow free air circulation, absorb moisture up to 34 percent of their dry weight without feeling wet, and wick the moisture away from the skin. DIMENSIONS (LxW): 42 to

Auto Reset Pillow Vibrator (Model 30-H120)

The Auto Reset Pillow Vibrator is designed to wake up individuals who are deaf or hard of hearing. The pillow works on a timer and vibrates to wake the user. It automatically shuts off and reminds the user to reset the alarm at night. Dual vibrator motors provide strong vibrations to wake heavy sleepers.

Automatic Overbed Table (Model P2600)

The Automatic Overbed Table, model P2600, is designed for use by individuals who spend extended periods in bed. This height-adjustable table features a melamine laminated top, a C-shaped open base to slide under the bed or accommodate a wheelchair, and four swivel casters for mobility. The height adjusts with fingertip pressure. DIMENSIONS: The casters are 2 inches in diameter.

Aviary Crib

The Avery Crib is a circle bed designed for use with infants with cognitive or severe physical disabilities. Designed to promote infant safety and provide an unrestricted view for the developing child, this hand forged iron crib offers easier child access to parents and eliminates the dangers of sharp corners found on standard cribs. The crib has doble drop-side access and a canopy assembly and includes a high-density foam mattress. OPTIONS: Bedding and linens watterproof pad, and mattress pad.

Babee-Tenda Safety Table

The Babee-Tenda Safety Table is a safety feeding and play table designed for use by young children with parents who use wheelchairs. Height-adjustable, this product can be used as a "short" high chair for feeding and taking care of a child. This product converts for a number of uses including infant seat/carrier, bather, changing table, high chair, booster chair, swing, playtable, chalkboard, easel, utility table. The feeding table is designed so that the baby is surrounded by the table and ca

Babeetenda Converting Crib

The BabeeTenda Converting Crib is designed to convert from a Baby Crib to a Toddler Crib to a Youth Bed and finally to a Junior Bed. It is made of hardwood on a steel frame with end panels covered in mar-proof laminate. There are plastic teething rails all the way around and the bed is mounted on 2-inch casters for mobility. The mattress is made of firm high-density non-allergenic foam. The sides have hardwood slats, glued and pinned with steel 2 3/8 inches apart. Both sides can be lowered by re

Baby Lambskin Rug + Woolskin

The Baby Lambskin Rug + Woolskin is a bed and decubitus pad pad designed for use with infants and children with severe physical or neurological disabilities or spinal cord injury. These lambskins can be used in cribs, beds, strollers, and car seats. DIMENSIONS: 26 x 36 inches. The pile is 24 millimeters. COLOR: Champagne.

Back Bone Pillow

The Back Bone Pillow is designed for use by people with neck or back pain. Shaped like an elongated X, this pillow is filled with fluffy polyester filling, has a polycotton case, and supports the upper back, neck, and shoulders. DIMENSINS: (LxD): 32 x 18 inches in diameter.

Back Jack (Models Bj-M & Bj-Xl)

The Back Jack is a back support cushion designed to provide support when sitting on the floor. All models feature a slightly reclined back and a wedge seat. They have a steel frame with a foam seat pad and a canvas cover. SIZES: Medium (BJ-M) or extra-large (BJ-XL). DIMENSIONS (HxDxW): 20 x 11 x 14 (medium) or 21.5 x 12.5 x 16 x 12.5 (extra large).

Back Relax Footrest

The Back Relax Footrest is a portable footrest designed for use by individuals with lower extremity, circulatory, or back disabilities. This small footrest supports both feet to minimize back strain and folds for storage and transport. When folded, the unit is small enough to fit in a briefcase, purse, or pocket. It stands four inches off the floor when open. The unit is made of strong ABS plastic with sturdy metal bars that support the fold up legs. DIMENSIONS: (LxWxH): 8.5 x 4 x 4 inches (ope

Back Rest.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Rustic aids are simple aids meant for outdoor use. Simple back rest for person sitting on the ground without good trunk control. Instructions for a simple back rest for use when sitting on the ground. Drive two stakes into the ground and cover with a canvas bag or lace with a piece of rope. Includes drawing. SKILLS REQUIRED: Assembly. AUTHOR: Caston, D. TITLE: Easy To Make Aids For Your Handicapped Child. REF: Book: Englewoods Cliffs, NJ: Prentice-Hall

Balzac Balloon Ball

The Balzac Balloon Ball is a large, inflatable, textured balloon designed to encourage motor skills and balance for individuals with a physical disability. Place noisy objects such as coins inside the balloon to make it an audio tracking device for individuals who are hard of hearing. The protective cover allows clients to throw and kick the balloon safely. The Balloon comes with four bladders and a handbook with dozens of ideas. OPTIONS: Also available is a set of four replacement bladders, mod

Bariatric Expanda-Bed Trapeze

The Bariatric Expanda-Bed Trapeze is a bariatric trapeze designed for use by individuals with physical disabilities. This transfer aid fits on an Expanda-Bed bariatric bed (see separate entry). Users grab hold of the trapeze to ease entry and exit from bed.

Bariatric Lift Recliner (Model Mdr35B700V1)

The Bariatric Lift Recliner, model MDR35B700V1, is a recliner chair designed for use by individuals with mobility disabilities. This high-strength recliner has independent back and foot positionins with hand controls, an extra-wide head rest, and vinyl upholstery. Three separate motors control its operation. DIMENSIONS (HxW): 47 x 45 inches overall; the distance from the floor to the top of seat is 21 inches. When the chair is reclined, the distance required from the wall is 24 inches. The seat

Bariatric Perching Stool (Model 405)

The Bariatric Perching Stool, model 405, is an adjustable stool designed for use by obese individuals with balance or mobility disabilities. Equipped with a heat-sealed polyvinyl chloride padded seat this chair features tubular tensile steel back, tubular steel arms, an H-section for added strength, and four rubber tipped legs. DIMENSIONS (HxDxW): Seat is 20 to 26 x 12 x 20.25 inches. The footprint is 28 x 18 inches at the lowest position, and 29 x 18 inches in the highest position. The distance

Bariatric Perching Stool (Model 406)

The Bariatric Perching Stool, model 406, is an adjustable chair designed for use by obese individuals with balance or mobility disabilities. This chair has a padded back and tubular arms. The padding is made of heat-sealed polyvinyl chloride for additional comfort and the tubing is of high tensile steel. Additional features include an H-section for added strength. DIMENSIONS (HxDxW): Seat is 20 to 26 x 12 x 20.25 inches. The backrest is 340 to 140 millimeters. The footprint is 28 x 18 inches at

Bariatric Seating (Models 7125, 7130, 7140, 7126, 7231 & 7141)

The Bariatric Seating chair, models 7125, 7130, 7140, 7126, 7231 and 7141, is a reinforced chair designed for use by individuals with obesity and mobility disabilities or by individuals who require support while sitting. The chair has a laminated wood frame, and seat and back platforms are removable. DIMENSIONS: Models 7125 and 7126 are 29 inches wide; models 7130 and 7131 are 34 inches wide; and models 7140 and 7141 are 44 inches wide. SEAT (DXW): 25 X 20 (models 7125 and 7126); 30 X 20 (models

Bariatric Step Stool With Handle (Model Ss-H-05C)

The Bariatric Step Stool With Handle, model SS-H-05C, is a step stool designed for use by individuals with balance disabilities, caregivers, people of short stature, and people who are obese. This single step stool's frame is made of heavy duty tubular aluminum with a textured powder coat that will not rust, and it has a self-leveling anti-tip design. The stool has a platform with safety strips, angled leg tips to prevent slippage, and a vertical steel handrail attached to the back of the platfo

Barrier Free Wardrobe

The Barrier Free Wardrobe is an accessible wardrobe designed for wheelchair users. This wall mounted unit is available with different configurations of closet bar, shelves, or pull out drawers. MATERIALS: This wardrobe can be manufactured in wood or plastic laminate clad particle board. COLORS: Any color.

Base Mate Modular Adaptive Seating System

Geriatric chair on wheeled based for persons ranging from 4 feet 2 inches to 6 feet 4 inches in height. Anterior wedged seat, seat depth adjustable 15 inches to 21 3/4 inches in 3/4 inches increments, lower back section is 11 1/2 inches high. Upper back section comes in three sizes. Quick release side support panels, angle adjusters to adjust seat to back angle, quick-release contoured headrest, and safety belt. Four casters, two with locks.

Basket Weave Commode Chair

Basket Weave Commode Chair is designed for use by individuals who have difficulty getting to and/or using regular toilets as a result of limited lower extremity mobility associated with an injury, stroke, heart disease or muscular dystrophy.  It is a traditional wooden frame commode chair with woven fibred upholstery in white and beige. The removable seat conceals a plastic commode pan and lid with carrying handle. The high chair sides provide support to assist the user when sitting or standing.

Bath Steps For Child With Angelman Syndrome

CUSTOM ADAPTATION PURPOSE: To provide customized bath steps for a child with Angelman Syndrome. To assist the child’s mother with reducing lifting and relieving back strain from assisting her daughter in getting into the bath, a step-stool with a rail on one side was designed. A 19-millimeter piece of steel tubing was used for the frame, and was painted with white enamel. The stool has a 720-millimeter high hand rail on one side, and no rail on the other side. No railing on one side allows the

Battle Creek Deluxe Bedwarmer (Model 358)

The Battle Creek Deluxe Bedwarmer, model 358, is a foot warmer designed for use by individuals with circulatory disabilities or other conditions that cause cold feet. This electric warming pad slips under the sheet and mattress pad. It features a large switch on the power cord that is designed for easy use by seniors and others with fine motor disabilities. In addition to turning the bed warmer on and off, the switch allows the user to choose between high and low temperature settings. The unit h

Battle Creek Deluxe Cervical Pillow

The Battle Creek Deluxe Cervical Pillow is designed for use by individuals with arthritis or back or shoulder pain. It is made from two densities of foam to support the neck and the head (soft under the head and firm under the neck). It may be used to relieve pain associated with tension headaches, lower back, treatment of jaw pain (TMJ) and facial pain, muscle tension, and arthritic disorders. DIMENSIONS (HxLxW): 5 x 16.25 x 25.5 inches.

Battle Creek Standard Bedwarmer (Model 058)

The Battle Creek Standard BedWarmer, model 058, is a foot warmer designed for use by individuals with circulatory disabilities or other conditions that cause cold feet. This electric warming pad slips under the sheet and mattress pad. It features a large switch on the power cord that is designed for easy use by seniors and others with fine motor disabilities. The switch is lighted when the pad is on. POWER: Uses standard household current. DIMENSIONS (LxW): 36 x 18 inches. The power cord is 10 f

Beach Chair Supports Child With Cerebral Palsy.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Posture chair with a wide base to allow stability on uneven ground. Chair made with plastic water pipe and fittings, with the deep seat made of nylon mesh, pop riveted to the frame. There is a chest high bar which can be fitted across the front. Designed for an active child with cerebral palsy. COMMENTS: Working drawings of the chair are available from: Technical Aid to the Disabled, 227 Morrison Road, PO Box 108, Ryde, New South Wales 2112, Australia.

Bean Bag

The Bean Bag is a bean bag chair designed for use by youth and toddlers with cognitive or emotional disabilities or autism or with marginal trunk control. The chair is covered in heavy-duty, flame-retardant vinyl and filled with polystyrene beads that mold to the body. Features include an interior safety locking zipper and the surface can be cleaned with a damp cloth or non-bleach spray. SIZES: Toddler and youth. DIMENSIONS: The toddler size is 26 inches in diameter and 82 inches in circumferenc

Bean Bag Beds (Models 9Sbbb & 9Jbbb)

Bean Bag Beds are body positioners designed for use by children and adults with neurological or severe physical disabilities. Made of tough, wipe-clean vinyl, these positioners conform to the user's body shape. SIZES: Model 9SBBB is a Senior Bean Bag and model 9JBBB is a Junior Bean Bag. DIMENSIONS (HxLxW): Model 9SBBB is 25 x 215 x 78 centimeters and model 9JBBB is 25 x 120 x 60 centimeters.

Bed Access Stairs

CUSTOM ADAPTATION PURPOSE: To provide safe access to a custom-built bed for a child with cerebral palsy, developmental disabilities, and vision and hearing impairments at a comfortable height for care givers. The Custom-built Child’s Bed (see also separate entry) is a standard-sized twin bed with a high wooden storage base designed to keep the child safe while providing a comfortable height for caregivers. To provide access to the bed for the child, a set of access stairs was built in two parts

Bed Access Support

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with mobility disabilities to transfer from a walker to her bed safely without assistance. The device was constructed from plywood that extended under the mattress and up the side] and a piece of 0.75 x 3 inch board that sits on the mattress top. Holes were drilled into the board to which a spare wheelchair armrest was attached. TITLE: The Bed Access Support. WEB SITE: Workshop Solutions at http://www.workshopsolutions.com/COMPLETE/bedacc

Bed Aid For Mattress With Side Support Rail (Model 130)

The Bed Aid for Mattress with Side Support Rail, model 130, is a grab bar for bed designed for use by individuals with mobility or balance disabilities. This tubular aid is designed to assist movement in bed. The large foot profile slides under mattress and the unit is counterbalanced by the bed side support rail. DIMENSIONS: The height of the side support is 509 millimeters (mm), the width of the base at the widest point is 597 mm, and the width of the support rail is 330 mm.

Bed And Lap Tray (Model P5001)

The Bed and Lap Tray, model P5001, is a bed tray designed for use by individuals with mobility disabilities. Made of wood, this tray has a laminated top that tilts for reading or writing or lies flat for eating. Adjustable legs allow the tray to be used in bed, in a wheelchair, or in a lift chair.

Bed Buddy Plush Thermatherapy Neck Pillow

The Bed Buddy Plush ThermaTherapy Neck Pillow is a cervical pillow designed for use by individuals with neck and shoulder pain or arthritis. Filled with 100 percent all natural ingredients, this compact pillow drapes over the neck and shoulder while providing moist heat. It is long lasting, reusable, and lightly fragranced with lavender and chamomile. Other features include a velvety cover that is removable and washable. DIMENSIONS (HxLxW): 11.25 x 13.25 x 1 inches.

Bed Caddie

The Bed Caddie is a rope ladder designed to assist individuals with mobility disabilities or decreased back strength in pulling themselves to a sitting position in bed. This three-tiered nylon ladder has cushion grip handles and the ergonomic buckle design enables the unit to be attached to most wood or metal bed frames. DIMENSIONS: Grip length is 36 inches; handle grip is 5 inches. Strap length is adjustable up to 45 inches. CAPACITY: 300 pounds. WEIGHT: 2 pounds.

Bed Cane

The Bed Cane is a transfer aid designed for use by individuals with mobility disabilities. This device consists of a large, crook-shaped handle with a cushioned grip and a powdercoated shaft affixed to a wooden base. The base fits between the mattress and box springs to provide stability for the handle which can be used for assistance while entering and exiting the bed, as well as to maintain balance while rising to a standing position or transferring to a wheelchair. The unit can be installed o

Bed Cradle And Foot Support (Models 6435 & 6437)

The Bed Cradle, model 6435, and Foot Support, model 6437, is a blanket support designed for use by individuals at risk for pressure sores and foot drop. The sturdy steel frame clamps securely to the mattress to prevent the device from moving while holding the blankets off the user's feet. The three-piece frame disassembles for storage.The cotton foot support cover (sold separately) slips over the frame to help prevent foot drop. DIMENSIONS: 36 inches wide.

Bed Desk

The Bed Desk is a bed tray, bookholder, and laptop/notebook computer support designed for use by individuals with mobility, upper extremity, or severe physical disabilities or spinal cord injury. This unit is a book stand with legs like a bed tray. The two legs are collapsible and the desk can be adjusted to an angle for holding books, paper, or magazines. Made of imported Baltic birch, the unit supports up to 20 pounds and can be used with the legs extended or folded. When the legs are folded,

Bed Enclosure

CUSTOM ADAPTATION PURPOSE: To provide a child with developmental disabilities with a safe sleeping environment and keep her from climbing out. The slatted base of the bed sat below the edge of te side rails. Runners were fitted to the inside of the side rails and the slatted base was raised to sit on the runners. The enclosure has independent support legs and can be unscrewed and removed if necessary. The enclosure has a wooden frame with two latched gates on each side. Sturdy, tranluscent whit

Bed Extension

CUSTOM ADAPTATION PURPOSE: To provide a bed extension for a hospital-style bed for a tall individual with acquired brain injury. A 150-millimeter extension with two metal bars was made that bolted into the existing holes at the top end of the bed base. A headboard, padded and covered with vinyl, was fixed at right angles to the bars. Straps with Velcro strips were used to fix the lower section of the mattress in position. This adaptation reduced the how often the individual’s position had to b

Bed Hoist

The Bed Hoist is a rope ladder designed to aid individuals with spinal cord injuries or lower extremity disabilities in pulling themselves to a sitting position in bed. This ladder attaches to the bed frame and consists of nylon side ropes with four rigid plastic rungs. By reaching and pulling up on each rung, the user pulls him or herself to a sitting position. DIMENSIONS: The rungs are 7.75 inches long x 1 1/16 inches in diameter. The rungs are spaced 7 inches apart.

Bed Ladder: Easy To Make Aids For Your Handicapped Child.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Rope ladder fastened to the bottom of a child's bed to allow the child to pull up to a sitting position. Describes bed ladder made of 5 or 6 pieces of 1 inch dowel, 12 inches long and drilled through each end; and two 6 foot pieces of 1/ 4 inch rope. Lists materials and diagrams for construction. SKILLS REQUIRED: Woodworking. Assembly. AUTHOR: Caston, D TITLE: Bed Ladder: Easy to Make Aids for Your Handicapped Child REF: London, England: Souvenir Press

Bed Lifter

CUSTOM ADAPTATION PURPOSE: To enable the existing bed of a young teen with cerebral palsy to be raised and lowered vertically to provide comfortable access for caregivers. The bed was an antique mahogany four-poster bed, which the young man liked, but which was of fixed height, making it difficult for caregivers to attend to his needs. A lifter was designed and built that would independently elevate the mattress and its base. The device was designed to fit beneath the bed and to lift the mattre

Bed Lifters

The Bed Lifters are leg extenders designed for use by individuals with arthritis, back pain, or mobility or lower extremity disabilities. These hardwood blocks lift a bed up off the floor, making it easier to get in and out of bed. These extenders can be used with square or round bed posts, casters up to 2.75 inches in diameter, and trundle beds. When stacked, these blocks fit together securely; steel rods (included) add additional stability. DIMENSIONS (HxWxL): Each block is 3.5 x 4.5 x 4.5 i

Bed Modification For Child With Angelman Syndrome

CUSTOM ADAPTATION PURPOSE: To provide a customized bed for a child with Angelman Syndrome. An evaluation of a standard IKEA bed already being used by the child resulted in the idea to turn the footboard into a gate. The customization had two parts: 1) the removal of the footboard and 2) the construction of an end gate. After removing the footboard, the end of the bed frame was strengthened with 19- millimeter plywood. The disassembled footboard was rebuilt to make a rigid end gate. The fitting

Bed Or Chair Block.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Blocks to elevate furniture to facilitate sitting and rising. Describes construction of blocks to elevate furniture, made of a solid block of wood slightly larger than the furniture leg to go on it and at whatever height needed, with a shell made of 4 pieces of plywood 1 1/2 times as tall as the block, firmly fastened to the block to provide stability. SKILLS REQUIRED: Woodworking. AUTHOR: Independence Factory TITLE: How to Make it Cheap Manual: Volume

Bed Rail Organizer

The Bed Rail Organizer is a bed pouch designed to provide storage and access to personal items for people who spend extended periods in bed. This lightweight plexiglas organizer stores remote controls, magazines, glasses, cordless phones, and more and hangs over the bed rail and secures with a small clamp to prevent slipping when the bed is raised or lowered.

Bed Rail Padding

CUSTOM ADAPTATION PURPOSE: To prevent an individual who has Huntington’s disease from injuring herself on the rails of her hospital bed. Made of wood, the rails posed a danger to the individual as she thrashes in her sleep and because she got her arms and legs trapped between the rails. The rails were removed and covered with two layers of foam rubber tubing. The rails were then covered with velour fabric by sliding the rails into pockets on the fabric panels. The rails were then reattached to

Bed Rail Pads (Models 14-1113 & 14-1112)

Foam side rail pads, medium firm, shelterite cover, tabs with snaps at four corners. 80 inches long, 12 inches high, 1 inch thick. Available with naugahyde covers (14-1112).

Bed Rails

The Bed Rails are designed for use by individuals with physical or balance disabilities. These three-bar steel rails prevent unattended exit from bed and feature an adjustable crossbrace and cross bars that fit between the mattress and the box springs. DIMENSIONS: The crossbrace adjusts to fit bed 26 to 46 inches wide. The rails are 55.5 inches long and 17.5 inches high.

Bed Rails

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create custom adapted bed railings to protect a child with cerebral palsy, developmental delay, and vision impairment from hurting herself by climbing out of bed. The parents had purchased a bunk bed set that had a potential for modification with a solid frame and clean sides making it easy to add attachments. Matching the style of the bed, three new rails were added with the fourth side fixed to the wall. Extensions were made for the head and foo

Bed Raiser

CUSTOM ADAPTATION PURPOSE: To enable caregivers to assist individuals in and out of bed without bending. A boxed frame of plywood and chipboard was nade to elevate a wood-frame bed. The lengthwise edges were recessed toward the center of the bed enabling the caregiver to to get as close to the bed as possible. Detachable sidepieces slot into the bed frame to prevent the individual from falling out of bed. The sidepieces fit at the end of the bed when not in use. DIMENSIONS: The unit raises the

Bed Rope Ladder (Model H764470000)

The Bed Rope Ladder, model H764470000, is designed to assist individuals to pull themselves upright in bed. The ladder consists of five rungs, each made of rigid plastic, strung at 5-inch intervals along a polypropylene rope. Rungs have smooth plastic end caps, and the rope is looped at the end. DIMENSIONS: Rungs are 8 inches wide, 7/8 inch in diameter. WEIGHT: Ladder is less than 1 pound.

Bed Rope Ladder (Model Ha-4508)

The Bed Rope Ladder, model HA-4508, is a bed ladder designed for use by individuals with mobility disabilities. The ladder is used to pull up to a sitting position in either a single or double bed. Ends of the rope cords are tied around the bed legs. WEIGHT: 286 grams.

Bed Side Rail Padded Cover (Model 120)

The Bed Side Rail Pad, model 120, is a side rail pad designed to prevent bruising or entrapment. These covers are made of plasticized mesh and are padded for comfort. The covers are equipped with a reinforced hole to accommodate tubes or wires.

Bed Surround

CUSTOM ADAPTATION PURPOSE: To provide a customized adaptation to a hospital bed frame for a young adult with a rare genetic disorder. A standard hospital bed with collapsible tubular steel rails was not ideal as the consumer was in danger of injuring himself due to involuntary movements. Placing the bed flush to the floor was not ideal for caregivers because it placed them at risk for back injury. A frame and net system was designed to attach to the existing hospital bed. Four metal posts are m

Bed Surround

CUSTOM ADAPTATION PURPOSE: To prevent a child with intellectual, communication, mobility, and vision disabilities from leaving the bed unattended during the night. An enclosure for the bed was built using eight plywood panels covered in fabric-covered foam. Each panel is equipped with two metal handles on the back to enable the child's parents to remove one or more when assisting the child in and out of bed or when changing sheets. Three panels fit down each side and the bed has a U-shaped pane

Bed Surrounds

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted bed enclosure for a child with global developmental delay and autism. The child outgrew her crib and her parents fitted her new bed with bedrails to prevent her from getting out; however, the child still managed to get out in the night despite being unable to crawl or walk. Concerned about the child’s safety, the family contacted TADNSW for assistance in creating bed surrounds for the bed to help keep the child safe. Three

Bed Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Bed tray with larger top than commercially available bed tables. Instructions for a bed table with a large top. Cutout for body, rim on three sides. Material list and diagram showing dimensions. Includes drawing and photograph.. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D. TITLE: Easy To Make Aids For Your Handicapped Child. REF: Book: Englewoods Cliffs, NJ: Prentice-Hall Inc: p 114-115. NARIC CALL NUMBER: R1798 1982.

Bed Turner.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: A mechanical bed that allows the person to turn themselves. A bed turner that can be operated on demand by the user or set to turn automatically on a timer. The mattress articulates and results in almpost a side lying position for the user. The mattres is divided and hinged longitudinally. It is suspended by pivots and bearings that allow the center board to tilt. Article describes how the bed was built, including materials and inital test results. Inc

Bed Underpad

Bed underpads. Extra thick absorbency. Sizes 17 by 24 inches, 23 by 24 inches, 23 by 36 inches.

Bed Wedge With Pocket

The Bed Wedge with Pocket is a positioning wedge or wedge pillow designed for use by individuals with circulatory, lower extremity, respiratory or digestive disabilities or neck, back, or shoulder pain or injury. Filled with shape-retaining latex foam, this wedge is made of durable foam with a washable zippered cover, and it provides elevation for the head, foot or leg while in bed. Features includes a 7-inch sewn in pocket for storing small items such as television remote controls, magazines,

Bed Wedges (Models 14-9111 & 04-9121)

Foam bed wedges, medium firm foam, double knit cover. DIMENSIONS: 2 sizes are available. 24 x 24 x 8 to 0 inches (model 04-9111) and 24 x 24 x 12 to 0 inches (model 04-9121).

Bed Wedges (Models K468, K469, & K470)

The Bed Wedges are foam, back rest wedges with washable covers designed to elevate the upper body or legs. DIMENSIONS: Three heights are available. Model K468 is 26 x 24 x 7.5 inches; model K469 is 26 x 24 x 10.5 inches; and model K470 is 26 x 24 x 12.5 inches.

Bed.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Rustic aids are simple aids meant for outdoor use. Platform for support in the prone or supine position. Instructions for building a bed platform. Six stakes are inserted in the ground and two cross pieces are tied across the ends. A piece of canvas fabric is sewn into a tube, with two side supports inserted in the tube and then tied to the corner stakes. A cloth bag can be sewn and slipped over the center stakes for a back support in a sitting positio

Bedfellow Positioning Roll (Model 6306)

The Bedfellow Positioning Roll, model 6306, is a positioning roll designed for use by individuals with physical disabilities. This flexible three-section pillow provides full body support in lateral and dorsal positioning. The pillow can be folded to fit body contours and the center pillow can be rolled while still attached or zipped off to provide lumbar or head support. Side leaning while seated can be managed by buttoning the two sides of the pillow together in front of the users. The Bedfell

Bedmount For Ipad Air

BedMount for iPad Air is designed for individuals with multiple sclerosis, muscular dystrophy, spinal cord injuries or any other neurological impairments that impact mobility and accessibility while positioned in bed. The Bed Mount is designed to work for all types of mattresses. It is positioned under the mattress for stability.

Bedrail Adaptations

CUSTOM ADAPTATION PURPOSE: To enable an individual with multiple sclerosis to raise and lower side rais on a home hospital-style bed independently. The rails were mounted toward the head of the bed and folded toward the foot of the bed, making it impossible for the user to raise or lower them while in bed. The rails were reversed and re-mounted toward the foot of the bed, enabling them to be opened from the top by the user. TITLE: Bathroom Assistance. JOURNAL: TAD Journal. REF: Volume 26, Numbe

Bedroom Commode Chair

Bedroom Commode Chair is designed for use by individuals who have difficulty getting to and/or using regular toilets as a result of limited lower extremity mobility associated with an injury, stroke, heart disease or muscular dystrophy.  This woven commode chair integrates subtly into virtually any home decor.  The wipe clean weave is flexible and forgiving, giving ample support and comfort for the user.  A vinyl covered foam seat pad is supplied, providing a comfortable chair when not in use as

Bedside Assistant

The Bedside Assistant is a side rail designed to provide a stong and steady handle to grip right at the edge of the bed for individuals who are weakened by illness or injury. Unlike bed rails, the Bedside Assistant does not need to be raised and lowered, so the user can be more independent getting in and out of their own bed. Each handle has a long legs that fit between the mattress and boxspring and stay in place by the weight of the matress and a special "anti-slip" friction material. They wor

Bedside Computer Stand

CUSTOM ADAPTATION PURPOSE: To enable an individual with spinal cord injury to utilize a computer from a bed. The base of the stand is a standard overbed table on a wheeled base. A box of varnished plywood on a caster base was added to the table. The box was equipped with a central shelf, creating three surfaces on which to store computer equipment and other items. The original table surface was attached to the side of the box and is height adjustable using a trinut. The surface also rotates so

Bedside Computer Stand And Monitor Positioning System

CUSTOM ADAPTATION PURPOSE: To position a computer screen to be easily seen from a bed, hold the monitor and printer, and store other computer-related equipment such as cables and CDs) for an individual with quadriplegia. Laminated MDF was used to make a stand, which has a base with locking castors, a range of drawers for storage at the bottom and shelves above them, one with larger space to hold the monitor. There is also a pull-out shelf above the drawers for a keyboard and can be used when i

Bedside Table

CUSTOM ADAPTATION PURPOSE: To provide custom adaptation to bedside table for an individual with rheumatoid arthritis. A plywood box was constructed and screwed into an existing table top. The inside of the box forms a lower shelf, and the top forms the upper one. Inside the box, a shelf mounted on drawer runners was added. The shelf has a small hook-style handle in the center for easy, out of the way use. A small gap all the back of the box accommodates cords for various equipment. A larger hol

Bellaire With Lumbar Support

The Bellaire with Lumbar Support is a seat lift recliner chair designed for use by individuals with mobility disabilities. This motorized chair has a hardwood frame; a welded steel base; heavy-gauge, no-sag steel springs in the seat and back; dacron fibers in the arms, back, and chaise for shape retention; and a cushioned seat for comfort and support. Covered in acrylic Wear-Dated fabric, this chair also features Scotchgard fabric protection, dual magazine pockets, adjustable lumbar support, tri

Better Baby Seat, The

The Better Baby Seat is a body positioner designed for infants with digestive, physical, and neurological disabilities. This seat can position the child at 30 degrees in the prone position to aid with gastro-esophageal reflux. A firm support for the head and trunk is included. The seat can also be used for reclined positioning. In both positions, the child is secures with a soft, roomy diaper-style seat harness. The harness and a removable, washable pad are included. OPTIONS: A vinyl pad and har

Betterposture Kneeling Chair - Standard (Model F1420)

The BetterPosture Kneeling Chair - Standard, model F1420, is a height-adjustable posture chair designed to promote good posture and strengthen the lower back muscles. The user sits in a kneeling posture with the knees resting on a knee pad. This manually height adjustable kneeling chair has a steel frame with nylon casters. The seat and knee pad are made of supportive polyurethane foam covered with durable fabric. DIMENSIONS (HxLxW): 21 to 28.5 x 29 x 18 inches. The seat is 12.5 x 17.5 inches. T

Bi-Level Computer Workstation

The Bi-Level Computer Workstation is a height-adjustable computer table designed for use by individuals who use wheelchairs. The height adjustment range starts low for young children or those using manual wheelchairs, and the height adjusts sufficiently to provide ample knee and arm-rest clearance for powered wheelchair users. Two hand cranks allow both work surfaces to be adjusted independently for correct view-height and balance between keyboard and monitor. DIMENSIONS (HxLxW): The keyboard su

Big Button Electric Bed Control

The Big Button Electric Bed Control is a bed control panel designed for use by individuals with fine motor, upper extremity, or severe physical disabilities or spinal cord injury. The control face features six large, heavy-duty buttons to control the head up/down, foot up/down, and bed up/down. Buttons function using the weight of the user's hand and do not require finger dexterity.

Biologics Micromini

The Biologics Micromini is an air flotation mattress designed for use by individuals at risk for pressure sores. This mattress replacement features variable pressure ranges, a vapor permeable surface, and a normal function indicator. POWER: Uses standard electrical current. DIMENSIONS (LxWxD): 80 x 34 x 8 inches.

Biologics Microsolo 900 Transport

The Microsolo 900 Transport is alternating air pressure flotation seat cushion and mattress surface designed for use by individuals at risk for pressure sores. This software-based system can be used with a variety of surfaces for continuity of care, including a wheelchair seating system, a mattress replacement, an overlay for prevention, as well as surfaces for operating room tables and stretchers. The system utilizes the ArchimedesLinker Algorithm which automatically measures the user's weight

Blanket Lift Bar

The Blanket Lift Bar is a blanket support designed to create a free space at the end of the bed between the covers and the mattress to allow free foot movement. The device is made of epoxy-coated steel wire. The frame is inserted between mattresses to give support and a free space. DIMENSIONS: Unit is 12 x 16 inches, with a fixed height of 16 inches. The free space created is 30 x 16 x 12 inches. WEIGHT: 1 pound.

Blanket Support

DO IT YOURSELF ENTRYPURPOSE: To remove the weight of bed coverings from sensitive legs and feet for individuals with spinal cord injury, neurological disabilities, burns, or arthritis. This article, included in a chapter entitled "Bedroom & Getting Dressed," describes how to make a strong, flexible blanket support from PVC pipe and fittings. When assembled, the base of the unit slides between the bed's mattress and box spring and the top extends above the foot of the bed; sheets, blankets, a

Block To Raise Arm Chair

CUSTOM ADAPTATION PURPOSE: To enable an individual with rheumatoid arthritis to use an arm chair. This project involved building a wooden frame to elevate the chair while not causing the user's legs to dangle or interfering with the built-in footrest. The frame has a land set into the inside for the chair legs to rest on. The rim of the frame holds the chair securely in place and ensures that the chair cannot fall off the frame when the user moves. DIMENSIONS: 90 millimeters high with the land

Body Pillow

The Body Pillow is a body support pillow designed for use by individuals with back, neck, and shoulder pain. This pillow is designed to reduce strain on the head, neck, back and shoulder, cushion the entire body, and promote proper spine alignment. The pillow is stuffed with hypo-allergenic 100 percent polyester fill and is machine washable. OPTIONS: A machine washable protective cover made of a polyester-cotton blend is available. DIMENSIONS: The pillow is 48 inches long and the cover is 56 i

Bodyline Sleeper

Contoured mattress pad features center valley depression for lower back support and knee ridge for leg relaxation. Can be placed on top of present mattress or box springs, or on any hard, flat surface. Pad is made of polyurethane foam and covered with soft quilting. Available in Twin, Full, Queen or King Sizes. All are 74 inches long. Twin is 38 inches wide, Full 53 inches wide, Queen 59 inches wide, and King 76 inches wide. .

Bodyline Sleeper Contoured Mattress Overlay

Contoured foam mattress surface for pressure relief. Contoured ridge for lumbar spine support and knee ridge for reduction of hip and leg muscle stress. Polyurethane foam. Velcro pads secure to existing mattress. Available in standard twin, full, queen and king sizes. Aqua blue quilted fabric.

Boppy

Boppy is a body positioner designed to provide support for infants in a prone or suppine position and to provide support while sitting for young children.The C-shaped padded, cushion style support features an opening to cradle an infant or to fit around a child's hips. Two of these cushions may be stacked for support while sitting. OPTIONS: Cotton slipcover. COLOR: The pillow is white. The slipcover is available in blue with bees or pistachio dots.

Brandt Revolving Stools

Many models of adjustable height stools with casters: round or contoured seats, standard back, body contoured back or no back.

Brandt Step On Footstools

Footstools. Nonslip rubber mat on platform. One and two step models. Available with handrails, reinforcing leg braces.

Brass Tone Canopy Crib

The Round Brass Crib is a circle bed designed for use with infants with cognitive or severe physical disabilities. Designed to promote infant safety and provide an unrestricted view for the developing child, this brass crib offers easier child access to parents and eliminates the dangers of sharp corners found on standard cribs. The crib has clear brass rope spindles, drop-side access, and a fluted dome assembly and includes a high-density foam mattress. OPTIONS: Bedding and linens watterproof p

Broda Auto-Locking Glider Chair (Models 100-10Al, 100-15Al, & 100-20Al)

The Broda Auto-Locking Glider Chair is a rocking chair designed for use by individuals with Alzheimers disease or dementia. The chair begins to glide once the user sits down, and stops gliding when the user begins to vacate the chair. It also features a caregiver-operated lock to prevent unwanted gliding. The smooth gliding action produces a calming effect and can help reduce the need to wander. It also provides mild exercise. The frame is made of 16-gauge powder coated tubular steel with a stab

Broda Basic Chair (Model 30Vt)

The Broda Basic Chair, model 30VT, is a wheeled geriatric recliner designed for use by individuals who need support while sitting. This chair features a suspension system of straps that conform individually to the user's body, thus suspending the user's weight across multiple points. Other features include a seat with tilt infinitely adjustable up to 25 degrees, a reclining back with the recline infinitely adjustable up to 45 degrees, an adjustable-length elevating legrest, a removable flip-down

Broda Basic Chair (Model 80V)

The Broda Basic Chair, model 80V, is a geriatric chair designed for use by individuals who need support while sitting. It is designed for users who require a fixed hip angle of 90 degrees and/or those requiring tilt in space without recline. The seat tilt is infinitely adjustable up to 38 degrees. Other features include an adjustable elevating legrest, removable flip-down footrest with adjustable footplate angle, armrests with an independent height-adjustment range of 4 inches, removable upper b

Broda Elite Chair (Model 35V)

The Broda Elite Chair, model 35V, is a geriatric chair designed for use by individuals who need support while sitting. This chair has up to 25 degrees of infinitely-adjustable seat tilt and up to 45 degrees of infinitely-adjustable back recline. It has a suspension system of straps that conform individually to the user's body, thus suspending the user's weight across multiple points. Other features include an adjustable elevating legrest, single- or double- plate footrest with adjustable footpla

Broda Elite Chair (Model 785)

The Broda Elite Chair, model 785, is a recliner chair designed for use by individuals who need positioning support while sitting. This tilt-in- space chair has up to 90 degrees of infinitely- adjustable back recline and up to 38 degrees of infinitely-adjustable seat tilt. It features a suspension system of straps that conform individually to the user's body, thus suspending the user's weight across multiple points. The removeable swing-away armrests are individually height adjustable, with push-

Broda Elite Chair (Model 85V)

The Broda Elite Chair, model 85V, is a geriatric chair designed for use by individuals who need support while sitting. This tilt-in-space chair has up to 38 degrees of infinitely-adjustable seat tilt and up to 90 degrees of infinitely-adjustable back recline. It has a suspension system of straps that conform individually to the user's body, thus suspending the user's weight across multiple points. Other features include an adjustable elevating legrest, single- or double-plate footrest with adjus

Broda Midline Full Recliner

The Broda Midline Full Recliner is a recliner chair designed for use by individuals who need positioning support while sitting. This tilt-in- space chair has up to 90 degrees of infinitely- adjustable back recline and up to 38 degrees of infinitely-adjustable seat tilt. It features a suspension system of straps that conform individually to the user's body, thus suspending the user's weight across multiple points. Other features include armrests with independent height adjustment within a range o

Bunk Bed Ladder Modification

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a customized bunk bed ladder for a child with Edwards Syndrome. To protect the child from injury the bottom three rungs of the bunk bed ladder needed to be screened off by putting mesh on the inside. However, this would make the child’s sister unable to use the ladder rungs safely to climb into the top bunk. A new rung unit was created which completely covers the bottom three existing rungs. The new rung unit has mesh fabric on the inside,

Bunk Bed Rails

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create customized bunk bed rails for a child with Edwards Syndrome. A side rail for the bunk was created using a steel tube frame padded with foam and covered in strong white mesh fabric and held in place by canoe clips. The rail is mounted on two brackets which fit over the frame of the bunk base, and can be easily lifted in and out of the bed. This adaptation is strong enough to avoid damage to the frame and safe for the child should she bang ag

Butterfly Pillow

The Butterfly Pillow is a cervical pillow designed to provide cervical and head support when lying down. The pillow features a narrow center and wide ends, and is made of a non-allergenic polyester fiberfill. A pillow case is included. DIMENSIONS: 19.5 x 25 inches.

Butterfly Pillow

The Butterfly Pillow is a cervical pillow designed to provide maximum support for the head and neck. Filled with polyester fibers, the butterfly-shaped pillow comes standard with a machine-washable cover. DIMENSIONS: 22 x 18 inches. COLOR: White.

Butterfly Pillow (Model N7103)

The Butterfly Pillow, model N7103, is a contoured pillow designed to reduce stiff neck, shoulder, and back pain. The pillow has a butterfly design and is fiber filled. A zippered satin cover is included. DIMENSIONS (LxW): 17 x 22 inches. COLOR: The cover is blue.

Bye-Bye Decubiti Mattress Overlay

The Bye-Bye Decubiti Mattress Overlay is an air flotation mattress surface designed to aid in the prevention of pressure sores. The overlay is made of heavy gauge natural rubber, and consists of five mouth inflatable sections held together in a pocketed cover of fleece and velour. The overlay is available in two models to fit standard hospital size beds. The segmental construction permits varying the amount of air in each section. The overlay is used over the regular mattress. It may be folded z

Canopy Enclosed Bed

The Canopy Enclosed Bed is an enclosed bed designed for use by children with autism, behavior disorders or sleep disorders such as sleepwalking that cause wandering. The bed's stainless steel frame includes two folding bed rails and four poles at the corners that support an upper section on which a full canopy is mounted. The frame and bed rails are padded. The mesh panels unzip on all four sides for complete access to the child. Locking zippers can be positioned where needed for the use of IV l

Cardboard Boxes For Use As Chairs.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Cardboard boxes used as a seat and play surface for a young child with poor balance. Describes ways a cardboard box can be used as a chair, playpen, and practice areas for standing and walking. Illustration shows a box big enough for the child to sit in with legs outstretched, and another smaller box on its side inside the first box to provide a play surface. AUTHOR: Finnie, N R TITLE: Handling the Young Cerebral Palsied Child at Home REF: New York: E

Care Chair 1, 2, & 3

Upholstered chair with powered elevating seat. Three models; straight, semi reclining, and fully reclining. Operated by cord mounted rocker switch, with optional toggle switch. Assorted colors and patterns. Soil resistant fabrics available. U.L. listed electrical components and 14 gauge steel lift mechanism. 2 year warranty on lift and recliner mechanisms, 1 year on motor.

Careassist Es Bed

The CareAssist ES Bed is a motorized bed designed for use by individuals with severe physical disabilities. This adjustable electric hospital bed includes siderails, dual-locking brake casters with audible alarm, and integrated bed extenders for adding length to the bed. The bed moves in and out of a chair position for dining with a one-button control. Large button caregiver controls are located in one central location at the point-of-care, along with an angle of bed indicator and customizable a

Carefor Reusable Underpads

The CareFor Reusable Underpad is designed for use by individuals with incontinence. These quilted underpads are designed to control and absorb liquid. The brushed polyester top sheet features EnGarde to fight bacteria, fungi, and odors. Made to withstand repeated launderings, the pads have a waterproof backing and are finished with a waterproof binding. The bed-sized pad is available with or without tuck-in flaps. SIZES: Bed and wheelchair. DIMENSIONS: 23 x 36 inches, 32 x 36 inches with or with

Carefor Waterproof Sheeting.

Waterproof sheeting. Eight gauge plastic, 36 by 54 inches or 54 by 72 inches. Single texture flannel rubber, 36 by 36 inches, 36 by 54 inches, or 36 inch wide roll by 25 feet. Supported rubber, 36 by 54 inches, rolls 36 inches wide by 25 feet long. Double texture flannel rubber, 36 by 36 inches, 36 by 54 inches, roll 36 inches by 25 feet.

Carex Easy-Up Bed Rail

The Carex Easy-Up Bed Rail is a side rail designed for use by individuals with mobility disabilities. Features include a two-in-one design that provides the security of a bed safety rail with the convenience of a padded bed support bar and a single-step release that can be easily raised and lowered by a caregiver. Designed for home use with a powder-coated compact frame, this bed rail fits any standard sized bed and can be assembled without the use of tools. DIMENSIONS (HxDxW): 22 x 1.50 x 41 in

Cedar-Black Ada Picnic Table (Model 07Ey1148)

The Cedar-Black ADA Picnic Table, model 07EY1148, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. Made of recycled plastic, this long table has space for a wheelchair at each end. The table top and seats are slightly grained for a cedar wood appearance. DIMENSIONS (HxLxW): The tabletop is 31 x 97.5 x 29 inches. The seats are 20 x 72 x 9.5 inches. WEIGHT: 358 pounds. COLORS: The top and seat are cedar-colored and the frame is black. D

Century's Lift Transfer System.

Patient lift with single belt lift mechanism, lifts and transfers persons in sitting position. Height 39 3/8 inches, width 21 5/8 inches, length 33 1/2 inches, weight 81 1/2 pounds. Lifting range 15 3/4 inches. Four 3 inch casters with locks. Optional model with expandable base, crank operated.

Cervical Comfort Pillow (Model 8023)

The Cervical Comfort Pillow, model 8023, is a cervical pillow designed to privde neck support to relieve pressure and tension. It is a large flat rectangular foam pillow with a raised and rounded end to place neck in a normal position. It is comfortable when lying on side, back or stomach and is washable with a removable dacron/cotton cover. OPTIONS: pillow with blue satin cover (8023S). DIMENSIONS: 17 x 14 inches. COLORS: blue.

Cervical Contour Pillow (Model 8024)

The Cervical Contour Pillow, model 8024, is a cervical pillow designed to support the neck during sleep or rest. The cylinder-shaped pillow is filled with dacron polyester fiber and is non-allergenic. It is completely washable. OPTIONS: pillow with gel pack (8024G); pillow with blue satin cover (8024S). DIMENSIONS: 18 x 7 inches.

Cervical Pillow

Foam pillow with contoured cutout for neck. Removable cover.

Cervical Pillow

The Cervical Pillow is a cervical pillow designed for use by individuals with arthritis. It provides support for the neck when the individual is lying on his back or side. It provides firm support on the ends with a softer cushion in the middle. The Cervical Pillow may be used alone or with a standard pillow. DIMENSIONS: 4.5 inches diameter x 17.25 inches long.

Cervical Pillow (Model 04-7115)

Cervical pillow with cotton broadcloth cover filled with styrofoam beads. Contours for individual comfort. Extra covers available.

Cervical Pillow (Model 8903)

The Cervical Pillow, model 8903 is a cervical pillow designed for use by individuals with head, neck or shoulder disabilities. This pillow is made of polyurethane foam with cotton cover and overlapping fabric closure. It is designed to support the neck and head while sleeping, prevent cramped or stiff necks, and support the upper spinal area. DIMENSIONS (LxW): 20 x 17 inches. COLOR: White

Cervical Pillow (Model Fa475) & Butterfly Pillow (Model Fa473)

The Cervical Pillow, model FA475, and the Butterfly Pillow, model FA473, are designed to give support to the neck area. The pillows are made of polyester fiberfill, are contoured, and come with a cover. DIMENSIONS: 21 inches long.

Cervical Rest Pillow

The Cervical Rest Pillow is designed for persons with head, neck or shoulder disabilities. It provides head support without increasing excessive trunk curvature caused by standard pillows. Made of non-allergenic polyester filling in medium/firm support, the pillow includes a case which is machine washable.

Chair Brake

CUSTOM ADAPTATION PURPOSE: To enable an individual with a motor neuron disability to transfer safely to and from a wheeled office chair with the aid of a caregiver. The office chair has a swivel seat and a standard five-leg star base with casters. During transfers the seat could swivel or the chair move. To stop the chair from moving, a standard spring-loaded doorstop with a metal pin and a rubber stopper on the end was bolted to a leg on each side of the base. The caregiver can push down on th

Chair For The Child With Hypertonic Cns Dysfunction.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Chair with a cylindrically shaped seat for the child to straddle, in order to promote balance and encourage adduction and external rotation of the hip, hip and knee flexion and ankle dorsiflection. Describes child's chair made with a length of 10 inch sewer pipe on a base high enough that the child's feet rest flat on the floor. The base and backrest are made of wood. Seat and back are padded, and velcro straps may be added as thigh supports. Includes

Chair Raisers

CUSTOM ADAPTATION PURPOSE: To provide a child with multiple disabilities with access to an elevated cut-out table. The cruciform-shaped risers were made of 9-millimeter plywood and have vertical housings at each corner. The housings accommodate the full depth of the chair legs, but pine inserts were also made which can be dropped into the housing to further elevate the chair for taller children. DIMENSIONS: The vertical housings are 180 millimeters high. TITLE: Supporting Early Intervention. JO

Chair Sox

The Chair Sox are furniture tips designed for use by individuals with cognitive or emotional disabilities and balance disabilities. These non-slip furniture tips are designed to eliminate distracting noise of shuffling chairs and desks in a classroom setting. These tips come pre-cut and ready to assemble by slipping them over the feet of chairs or desks. The tips fit all standard classroom-style chair and desk legs. They can also be used as walker tips.

Chair Trolley.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Mobile platform to place under standard chair to easily move the chair around. Instructions for building a platform with casters to place under a standard chair. Includes corner blocks to prevent legs of chair from falling off platform and the board can be lengthened for a footrest. Includes drawing. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D. TITLE: Easy To Make Aids For Your Handicapped Child. REF: Book: Englewoods Cliffs, NJ: Prentice-Hall Inc:

Chair With Double Seat

CUSTOM ADAPTATION PURPOSE: To enable an individual with neurological disabilities to sit upright. Because of severe pain, the only comfortable position for the individual is with his legs completely curled up. A chair with essentially with a two-layer seat was developed. The upper section supports the user's buttocks and the lower section supports the legs in a curled position. The seat layers are mounted on a base made of one-inch square tubular steel. Castors at one end allow the chair to be

Chair With Glides

CUSTOM ADAPTATION PURPOSE: To provide a means for an individual who has had a stroke to move under a dining table after sitting on a chair. A glide was attached to the bottom of each leg of a standard dining room chair. This enabled the chair to slide more easily on the carpet while keeping the chair stable when the user sat down on it. TITLE: Post Stroke Assistance. JOURNAL: TAD Journal. REF: Volume 25, Number 2, Winter 2005: P. 10-11. PAGES: 3 (including cover).

Child Size Multi-Use Classroom Chair (Model 1700)

With the addition of easily attached accessories, this basic chair can be customized to meet the individual needs of orthopedically delayed or neurologically involved children, who are up to approximately 48 inches tall. An adjustable back rest and seat belt are standard features. The accessories the as follows: adjustable lateral supports, removable knee abductor, adjustable pelvic supports, clear acrylic tray, adjustable foot bracket and stabilization skis to prevent tipping. COLORS: Black, sp

Child's Bed With 3-Piece Hinged Safety Rails

CUSTOM ADAPTATIONPURPOSE: To protect and restrain small children while they sleep in a comfortable environment which allows them free movement and visibility of their surroundings. The bed, which is designed to be placed with one side against a wall, has a fabric-enclosed foam pad mounted on the side that is placed against the wall and high head- and baseboards. On the side opposite the wall, there are three interconnected sections of slats that can be opened from the outside with the forward se

Children's Bed Rail And Sports Pouch

The Children's Bed Rail and Sports Pouch is a portable side rail designed for use by children with balance, mobility, or cognitive disabilities. Made of heavy-duty, poder-coated steel, the rail has a foam grip handle that folds for storage and transport. Reversible and adjustable for use on either side of the bed, this rail secures to the bed frame and mattress with the included safety strap. The included three-pocket organizer fits over the rail to prevent entrapment and provide storage. DIMENS

Chiropractic Massage Pillow (Model Cm-1)

The Chiropractic Massage Pillow, CM-1, is a vibrating, contoured pillow with a keyhole design. The pillow produces a massage action and is designed to encourage proper sitting posture. POWER: Battery operated on 2 "D" batteries (not included). DIMENSIONS: 14 x 10 inches.

Cindy Lift

The Cindy Lift is a seat transfer lift aid designed to make lifts more manageable for caregivers and the individual being assisted and to broaden accessible areas for its user. The lightweight aluminium frame allows for quick transfers in a three-step process. This unit adjusts to the user's body and reduces the weight of its occupant for the lifter. The narrow profile fits through doors, halls, and restroom stalls. With this device, the user is able to wear street clothes instead of gowns, and

Circle Bed

The Circle Bed is designed to rotate the patient on the bed frame.

Cirqlation Elite Foot And Calf Massager (Model Ht-1360)

The CirQlation Elite Foot and Calf Massager, model HT-1360, is a foot and calf massager designed for use by individuals with circulatory and lower extremity disabilities. This massager is covered in leather-like upholstery and has two U-shaped slots into which the user places the foot and lower leg. It is mounted on a metal frame so it can rotate 180 degrees. It massages the calves in an upward, rolling or wave-like fashion and vibration can be added. The user can select from three auto-massage

City Round Pedestal Wheelchair Accessible Picnic Table

The City Round Pedestal Wheelchair Accessible Picnic Table is designed for use by individuals who use wheelchairs. This round picnic table has three seats attached to the pedestal which can accommodate six adults. The table also has an opening to accommodate a wheelchair. The table top is thermoplastic coated and sits on a powder-coated steel pedestal. The table also has an umbrella hole. DIMENSIONS: Table is 30 inches high and the table top is 46 inches in diameter. The seats are (HxW) 18.25 x

City Square Picnic Table - Wheelchair Accessible (Model Pup358H-V)

The City Square Picnic Table - Wheelchair Accessible, model PUP358H-V, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This table has three attached seats with space for a wheelchair on the fourth side. It has a galvanized, powder-coated steel frame, with a high-gloss plastic coated table top and seats, and is portable/surface mounted. The table top has an umbrella hole. DIMENSIONS (HxLxW): The table top is 30 x 56 x 46 inches. The s

City Wheelchair Accessible Picnic Table - One End (Model Pup238H-V8S)

The City Wheelchair Accessible Picnic Table - One End, model PUP238H-V8S, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This long table has seats on two sides and space for a wheelchair on one end. It is made from powder-coated galvanized steel, with plastic coating on the table top and seats, and has a portable/surface mount. DIMENSIONS (HxLxW): The table top is 30.5 x 96 x 30 inches and the seats are 18.75 x 72 x 12 inches. WEIGH

City Wheelchair Accessible Picnic Table - Two End (Model Pup238H-V8)

The City Wheelchair Accessible Picnic Table - Two End, model PUP238H-V8, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This long, rectangular table has an extended table top at both ends to allow access for two wheelchairs. The portable, surface- mounted table has two benches and is made from thermoplastic-coated steel with a powder-coated galvanized steel frame. DIMENSIONS (HxLxW): The table top is 30.5 x 96 x 30 inches. THe seats

Class Desk With Adjustable Legs

The Class Desk with Adjustable Legs is a computer desk designed for use by individuals who use wheelchairs. Work surface heights can be altered as needs change and the work surface is available in a variety of widths. The desk features a hinged "Flip-Top" door that runs the full length of the work surface to provide access to cords and cables. The scratch-resistant work surface has a smooth, rounded front edge and a chair rail to prevent hardware from sliding off. OPTIONS: Adjustable CPU sling;

Classroom Positioner Chair (Models Cpc25, Cpc29, & Cpc33)

The Classroom Positioner Chair is a youth positioning chair designed for use by children with mobility or neurological disabilities. This wooden chair features independent adjustment of the height, depth, and angle of the seat back and footrrest. The contoured seat cushion can be set at up to 20 degrees anterior tilt, as well as level or at a posterior tilt. The chair comes standard with a contoured seat cushion, seat belt, back pad, lateral supports, and locking casters. OPTIONS: Foot surface w

Classroom Positioner Desk / Stander (Models Ds1 & Ds2)

The Classroom Positioner Desk/Stander is a height-adjustable classroom desk and standing table designed for use by children with mobility or neurological disabilities. This desk can be used with the Classroom Positioner Chair (see separate entry) or independently. Features include height and angle adjustability, a multi-adjustable desktop, adjustable knee block, and lateral pelvic pads for standing positions. The desk also included latches to secure it to the Classroom Positioner Chair. The desk

Clinical Recliner

The Clinical Recliner is a vibrotactile amplification system designed for use by individuals with cognitive, neurological, physical, or emotional disabilities. Used for positioning, calming, or stimulating, this chair features modern styling, a welded steel frame, and a patented gas spring recliner mechanism which enables the chair to recline to the Trendelenburg position. A built-in patented vibroacoustic speaker system provides tactile stimulation, enabling users to feel music as well as hear

Clinitron At Home Air Fluidized Therapy Bed

The Clinitron At Home Air Fluidized Therapy Bed is a flotation bed designed for use by individuals with pressure sores/ulcers, spinal cord injury, or severe physical disabilities. The bed surface is filled with ceramic beads similar to sand; the gentle airflow through the beads "floats" the user, resulting in the lowest possible interface pressure and virtually eliminating shear and friction. The airflow also provides warmth and aids in providing comfort and pain reduction. Bead temperature is a

Cloud Cushion (Model 9Clcl)

The Cloud Cushion, model 9CLCL, is a body positioner designed for use with individuals with neurological or severe physical disabilities. Made from strong PVC vinyl, this inflatable cushion also contains a layer of foam. When properly inflated, this cushion conforms to the user's body shape. DIMENSIONS: 84 x 84 x 12 inches.

Comfort + Plus Clinical Recliner (Models 6902 & 6903)

Recliner chair with high back and full length armrests. Reclines to 3 positions. Legrest elevates as chair reclines. Four 5 inch casters. Self storing overlap table tray swings down to side. Upholstery is vinyl bonded to foam, flame and stain resistant seams. Push bar on back. Overall width 27 inches, overall depth 37 inches, overall height 45 1/2 inches, seat width 20 inches.

Comfort Crown Convoluted Mattress Overlay

Eggcrate foam mattress surface for promoting even distribution of body weight to minimize pressure. Polyurethane foam. Available in standard twin, full, queen and king sizes.

Comfort Lift Chair (Model 300)

Adjustable seat lift recliner. Adjustable lift angles, from 30 to 180 degrees or flat position in 5 increments. Full recline with 1 1/2 inch placement from wall. Complete chair rises via gear driven motor. Welded steel tube lift mechanism is plated. Uses motor-driven linear actuator with clutch and thermal protection. 110 Volt, 2.4 Amp, standard household current. 100% Dupont nylon fabric with 3M Scotch Guard Protection, foam filled. Solid hardwood frame. Control may be hand held or mounted on r

Comfort Plus, Comfort Plus Ii (Model 6960)

Seat lift recliner chair. Fully powered back; removable back for cleaning, portability; choice of upholstery; back reclines within 8 inches from wall; contoured back; arms elevate with seat; armrest covers; 5.5 inch thick seat made of multiply layered foam; ottoman extends prior to back reclining to allow elevation of legs while sitting upright; storage pouch; side mounted switch for powered recline and lift. Overall height 41 inches, overall width 30 inches, seat width 20 inches, seat depth 21

Comfort-U Total Body Pillow

The Comfort-U Total Body Pillow is a body support pillow designed for use by individuals with arthritis and other disabilities. Filled with hypoallergenic Fossfil, this U-shaped pillow has long "arms" to provide complete body support in any position. The pillow can be wrapped to any position to cradle specific areas, including the head, arms, neck, back, and hips. Shaking this pillow out restores it to its original shape. A cotton zippered cover is included. OPTIONS: A natural unbleached cotton

Comfy Pillow

The Comfy Pillow is a cervical pillow designed to relieve pressure on the neck and upper back. The crescent-shaped, polyester fiber filled pillow cradles the neck and head. An adjustable Velcro-type closure assists in proper positioning and correct fit. The pillow is available with a choice of a zippered fabric cover or a zippered satin cover. OPTIONS: Replacement covers are available. COLOR: The fabric cover is available in blue; the satin cover is available in blue, green, pink, or white.

Comfy Sack

The Comfy Sack is a soft chair designed for use by children or adults with autism, Alzheimer's disease, or cognitive or emotional disabilities. Designed to provide comfort, these chairs are similar in design to bean bag chairs, but are made of polyurethane foam with memory properties. These chairs have come with an internal liner that allows the cover to be taken off and machine washed. The cover is available in a choice of microsuede or twill. DIMENSIONS: Available in 3.5 feet in diameter, 5 fe

Comfylap

The Comfylap is a bookholder, bed tray, and laptop computer table designed for use by individuals with mobility, neurological, or upper extremity disabilities. This lightweight, rectangular table is supported two legs, each of which has two locking joints in addition to the locking joint that connects the table to the leg. Each joint has an angle lock button. All of the joints can be adjusted so that the table can be used at a variety of heights and angles to provide a surface to serve as a lapt

Commercial Ada Concrete Table (Model Sw6012)

The Commercial ADA Concrete Table, model SW6012, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This round table has seats on three sides with space for a wheelchair on the fourth side. There is an umbrella hole in the center. The table is made of steel-reinforced precast concrete with a smooth polish finish and Natura Stone seats and frames. DIMENSIONS (HxD): The table is 31 x 66 inches in diameter. The table top is 38 inches in di

Computer Chair

CUSTOM ADAPTATION PURPOSE: To provide mobile seating at a computer for an obese individual with mobility and other disabilities. The chair is mad of 35 millimeter square steel tube with gusseted legs and four casters. The chair also features angled back uprights and curved back cross bars to provide optimum support. At the front of each arm are soclets for mounting a keyboard and mouse tray. The seat, armrests, and backrest have plywood bases with foam padding.The backrest pads are split in two

Computer Desk Modifications

CUSTOM ADAPTATION PURPOSE: To enable an individual with spinal cord injury to use his computer from his wheelchair. A purchased self-assembly desk was modified to accommodate a powered wheelchair. Two 100-millimeter-high panels were added to the bottom sides of the desk to increase the height and enable the user to get his feet under the desk. A plywood panel was added across the back to strengthen it and the shelf below the desk top was removed. A U-shaped notch was cut in the keyboard surface

Computer Desk Modifications

CUSTOM ADAPTATION PURPOSE: To enable an individual with spinal cord injury to use a computer desk. With the purchase of a new wheelchair, the individual found that his existing desk was too high for comfortable use. Since the desk legs were mounted on square wooden blocks,the optimal height was determined and 50 millimeters was cut off the bottom of each block. TITLE: Helpful Adaptations. JOURNAL: TAD Journal. REF: Volume 26, Number 4, January 2007: p. 18. PAGES: 2 (including cover).

Computer Table

The Computer Table is an accessible table for wheelchair users. The table's height is 29 inches to accommodate a wheelchair, and has a tabletop made of 3/4-inch plywood with a teak veneer. A monitor shelf is included at the rear of the table, and the legs consists of a set of standard folding table legs which will not interfere with the wheelchair's wheels. PROTOTYPE DEVELOPMENT: Designed by Paul Cermak for wheelchair users who cannot use standard computer desks because they are too low to wheel

Computer Tables (Models Hcp-4800 & Hcp-6000)

The HCP-4800 & HCP-6000 are computer tables and workstations designed specifically for wheelchair users. The main work area can be adjusted with a hand crank in order to accommodate a variety of wheelchair heights. This mechanism has an internal braking system. There are additional side brakes to insure stability of the table during operation. The workstations will accommodate a microcomputer, a monitor, a printer, external disk drives, printer paper, an expanded keyboard, and other necessar

Concord Ada Picnic Table (Model 07Eg1030)

The Concord ADA Picnic Table, model 07EG1030, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This table has seats on three sides and space for a wheelchair on one side. The table top is hexagon-shaped, with an umbrella hole in the center. The table is made from 100 percent recycled plastic. DIMENSIONS (WxH): The table top is 41 x 31.25 inches. Seats are 9.25 x 19 inches. The umbrella hole is 2 inches in diameter. WEIGHT: 330 pounds.

Cone Bed & Chair Raiser (Model Ha-4507)

Cone Bed and Chair Raisers, model HA-4507, are leg extenders designed for use by individuals with arthritis, back pain, or mobility or lower extremity disabilities. These molded plastic cone-shaped leg extenders raise the normal bed or chair height and are designed to be steady when in use. DIMENSIONS: The height is raised by 150 millimetes.

Contour Cloud Memory Foam Mattress Topper

The Contour Cloud Memory Foam Mattress Topper is a foam mattress surface designed to provide proper lumbar support and spinal alignment while sleeping. This topper has three layers of memory and support foams. The top layer is contoured to fit body position, relieving stress and pressure on sensitive areas. The inner layer is designed with inserts that adds lumbar support for the waist, lower back and hips, and the base layer provides overall cushioning designed to eliminate sagging due to overa

Contour Pillow

The Contour Pillow is a contoured pillow designed to relieve neck pressure and tension. The polyurethane pillow features a neck bolster on one side for separate head and neck support. The pillow includes a cover in a choice of fabric or satin. DIMENSIONS: 16 x 12 x 2 x .5 inches. COLOR: The fabric cover is blue and the satin cover is offered in a choice of blue, green, pink, or white.

Contour Style Vinyl Mattress Protector (Models C4100, C4300F, C4300Q, C4300K, & C4300T)

The Contour Style Vinyl Mattress Protector is a mattress protector designed for use by individuals with incontinence. This protector is made of high-quality vinyl and has elasticized edges to keep it in place. SIZES: Model C4100 fits hospital beds. Model C4300T fits twin beds, model C4300F fits full mattresses, model C4300Q fits queen mattresses, and model C4300K fits king mattresses. DIMENSIONS: Model C4100 is 36 x 80 x 6 inches. Model C4300T is 39 x 75 x 7 inches. Model C4300F is 54 x 75 x 7 i

Contoured Fitted Sheets For Hospital Beds (Models 8036, 8036S, 8036F, & 8035Xl)

Contoured Fitted Sheets for Hospital Beds, models 8036, 8036S, 8036C, 8036F, 8035XL, are bottom sheets designed specifically to fit hospital beds. The sheets are a 50/50 cotton/polyester blend and are completely washable. OPTIONS: Blue flannel (8036F). SIZES: 36 x 80 inches; 8035XL is 36 x 84 inches. COLORS: White; Blue Stripe.

Convert-Able Table

The Convert-Able Table is a height-adjustable tilt top work table designed for use by children and adults with mobility disabilities. This table features interchangeable snap-on table tops that allow it to be used for a variety of activities, such as reading and writing, art, and sensory stimulation. The height adjusts to enable a child in a floor sitter or an adult in a wheelchair or stander to use the table. Features include a powder-coated steel frame, four-dual locking casters, push-button

Convoluted Bed Pad (Models 7940, 7948, 7949, 7950, 8002, & 8003)

The Convoluted Bed Pad, models 7940, 7948, 7950, 8002, 8003, is a foam mattress surface designed to prevent and treat decubitus ulcers and also allows for better weight distribution and air circulation. SIZES: Hospital bed, 34 x 74 1/4 x 4 inches; full size, 53 x 74 x 2 inches; queen size, 56 x 78 x 2 inches; king size, 74 x 78 x 2 inches; (shrink pack) 34 x 74 1/4 x 2 inches; (shrink pack) 34 x 74 1/4 x 3 inches.

Convoluted Comfort Overlays

The Convoluted Comfort Overlay is a foam mattress surface designed for use by individuals who need extra padding for comfort while in bed. Made from combustion-modified polyurethane foam, the overlays are available in standard and premium densities. DIMENSIONS: 2, 3, or 4 inches thick. CAPACITY: 250 pounds

Convoluted Contour Pillow

The Convoluted Contour Pillow is an eggcrate foam contoured pillow designed to properly align the head and neck during sleep. Designed for use while on the side or back, the pillow follows the natural contours of the head or neck and the eggcrate surface provides even support and permits air circulation. The pillow has a polycotton cover and fits in a standard pillowcase. DIMENSIONS: 19 x 16 x 5 inches. COLOR: The cover comes in blue or white.

Convoluted Mattress Pad

The Convoluted Mattress Pad is an eggcrate foam mattress surface designed to promote even distribution of body weight to minimize pressure. The flame-retardant pad features single-layer construction. SIZES: Hospital bed, double, king, and queen sizes. DIMENSIONS (WxL): The hospital bed sizes is 36 x 80 x 3 or 4 inches. The double is 54 x 74 x 2, 3, or 4 inches. The king size is 76 x 74 x 2, 3, or 4 inches. The queen size is 60 x 74 x 2, 3, or 4 inches. COLOR: Blue.

Corduroy Wedge Pillow

The Corduroy Wedge Pillow is a wedge pillow designed to provide support for individuals with neck, back, or shoulder pain or injury. Filled with shape-retaining latex foam, this wedge pillow is designed to retain its shape while providing comfortable support to the neck, back, or shoulder during relaxation on a couch, daybed or regular bed. The pillow is covered with 100-percent cotton corduroy that is machine washable. DIMENSIONS (HxLxW): 11.5 x 18 x 10 inches. COLORS: Slate blue, burgundy, h

Corner Sitter

The Corner Sitter is a corner chair designed for use by children with neurological or severe physical disabilities. This chair is designed to help improve posture and promote upper body control. Features include a reclining backrest with adjustable sides for lateral support. The backrest angle is adjustable from a 20 degree recline to 15 degrees prone. Other features include a hip belt and an adjustable depth, removable pommel. The chair folds flat for storage. OPTIONS: Options include a high-ba

Country Lift Chair (Model Tmr-400)

The Country Lift Chair, model TMR-400, is a seat lift recliner chair for individuals with limited mobility to help them get into and out of the chair. It features a sealed single switch, paddle type, hand control; 4 rubberized leveler legs; an oak frame; fire retardant materials; a quick disconnect of electrical components; and a double plate, wide base, steel frame for stability. The chair reclines 8 inches more than standard recliners for near full bed positioning. POWER: 115 volt AC, 1.5 amps

Cozycare Unreal Sheepskin (Model 94076-Mn)

The Cozycare Unreal Sheepskin is a decubitus pad designed to prevent pressures sores in infants in incubators or open cribs. The pads are made of plush, thick polyester material that provides extra support and helps to evenly distribute pressure while allowing air to circulate. This pad is flame resistant, nonallergenic, and machine washable. DIMENSIONS (LxW): 17 x 20 inches.

Cpsc Therapy Shapes: Ramps (Models Tr-01 To Tr-03) & Cylinders (Models Tc-01 To Tc-03)

Cpsc therapy shapes have been designed to allow optimum positioning. Firm but flexible foam, covered with Naugahyde. Wedges or ramps: 24 by 24 by 6 inches high, 24 by 24 by 8 inches high, or 24 by 24 by 10 inches high. Cylinders: 8 inches diameter by 36 inches long, 10 inches diameter by 52 inches long, or 12 inches by 52 inches long.

Crawford Wheelchair Accessible Picnic Table (Model Kspb6Gpicada)

The Crawford Wheelchair Accessible Picnic Table, model KSPB6GPICADA, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This long table has seats on two sides with space for a wheelchair on one end. The table top and seats are made from 100 percent solid recycled plastic boards with UV stabilized color. The galvanized steel frame has cross braces for additional support. Stainless steel assembly hardware is included. DIMENSIONS (HxLxW):

Crazy Creek Chair & Power Lounger

The Crazy Creek Chair and Power Lounger are therapeutic seats designed for use by individuals who are unable to stand for long periods. The portable seats provide a padded seat and back support that can be used on the ground, boat deck, etc. They are constructed of coated 420 pack cloth, closed cell foam, fastex buckles, nylon webbing, carbon fiber stays and Neoprene. These seats can be adjusted from sitting to flat positions; they are waterproof and can be rolled or folded for carrying. Creek C

Crescent Cervical Pillow

The Crescent Cervical Pillow is an adjustable, crescent-shaped cervical pillow with Velcro closures. The pillow is polyester filled, and comes with a zippered, machine washable outer case.

Crescent Pillow (Model N5002)

The Crescent Pillow, model N5002, is a cervical pillow designed to support and correctly position the neck. This pillow supports the neck while napping or reading. A cotton cover is included. COLOR: The cover is light blue.

Crystal Crib

The Crystal Crib is a circle bed designed for use with infants with cognitive or severe physical disabilities. Designed to promote infant safety and provide an unrestricted view for the developing child, this metal crib offers easier child access to parents and eliminates the dangers of sharp corners found on standard cribs. The crib has clear Plexiglas spindles, drop-side access, and a canopy assembly and includes a high-density foam mattress. OPTIONS: Bedding and linens watterproof pad, and ma

Ctl Series Classroom Table

The CTL Series Classroom Table is a height-adjustable classroom table and computer work station designed for use by children who use wheelchairs. This table can be used in school computer labs. The work surface is made from high-density laminated wood and is supported by a powder-coated steel frame. OPTIONS: Enclosed CPU holder; keyboard drawer; keyboard arm and tray; modesty panel; wheel kit; surge protector; cable management kit; table to table cable connection kit; floor to table cable connec

Cushion Ease Side Rail Pads (Models 6013363, 6013365 & 6013663)

The Cushion Ease Side Rail Pads, models 6013363, 6013365 and 6013663) are side rail pads designed for use by individuals with physical disabilities. The pads' pressure relieving foam helps protect the user from hard side rails and reduces gaps between the bed-rails and mattress. Each pad has a Staph-Chek vinyl cover, and it is antimicrobial, flame- and stain-resistant and easily cleaned. The pads can be used with standard or swing-down bed rails, and they attach to the top rail using hook-and-lo

Cushion-Top Vinyl Bed Rail Pads (Models 401210, 401220, & 401230)

The Cushion-Top Vinyl Bed Rail Pads are side rail pads designed to provide protection from injury from bed rails. These foam-padded, vinyl-covered pads cover the rails and extend below and between the rail and the mattress for added protection. Added cushioning is provided on the top and inside of the rails. Velcro closures secure the pads to the rails. These pads wipe clean. DIMENSIONS: Model 401210 is 60 inches long, model 401220 is 72 inches long, and model 401230 is 80 inches long.

Custom Adapted Footstool

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted footstool for an adult with cerebral palsy. This individual worked as a disability advocate and often spends most of her eight-hour work day at her desk. She had difficulty with her feet resting on the floor while sitting and would experience swelling and muscle spasms, particularly when she was tired. Commercially available footstools were ill suited. The custom adapted stool was created using lightweight plywood to constr

Custom Dining Chair

CUSTOM ADAPTATION PURPOSE: To enable an individual with short stature to sit comfortably while dining. A custom-designed wooden chair was built. The seat height is the standard 45 centimeters from the floor; however, the seat depth is shallower than is standard to enable her to sit comfortably and be supported by the chair back. The chair has a lacquered finish and an upholstered seat. A small matching wooden stool was also built, which the individual can use to step up to get on to the chair a

Custom-Built Child's Bed

CUSTOM ADAPTATION PURPOSE: To provide a safe bed for a child with cerebral palsy, developmental disabilities, and vision and hearing impairments at a comfortable height for care givers. The standard-sized twin bed has a raised base and heavy-duty pine posts that support fixed rails on three sides. The rails on the fourth side slide up and down, with the weight taken on counterbalanced springs similar to those on a window sash. The rail is held in the raised position with bolts and a covered cat

Customized Double Sized Bed

CUSTOM ADAPTATION PURPOSE: To provide a customized bed for children with multiple disabilities. The customized bed was created for twin boys who have multiple disabilities including cerebral palsy, epilepsy, developmental delays, and vision and hearing disabilities. Caregivers wanted the two boys to be able to have shared sleeping arrangements due to the therapeutic benefits seen as a result of the boys' emotional bond. Additionally, the customized bed was to be placed in a family room rather t

Customized Table

CUSTOM ADAPTATION PURPOSE: To provide a customized table with a top level for a laptop computer and a lower slide-out lockable tray for a keyboard for persons with visual impairments, diabetes, and mobility disabilities who use a manual wheelchair. The table top and tray are made from plywood with pine surrounds, and the legs are solid maple. The legs have lockable casters so the table can be easily moved and stored when not in use. The tray slides back and forth in slots on either side, and i

Cut-Out Table And Foot Support

CUSTOM ADAPTATION PURPOSE: To provide a child with multiple disabilities with a work and play surface. Using an existing round table as a base, a removable square tabletop with a cut out in the center of each side was designed to be clamped on. Made of 18-millimeter (mm) thick MDF, the corners of the top were rounded and wooden cleats were fitted under each of the four sides. The cleats are turned and locked with T-bolts to secure the square top to the table. A platform of 9-millimeter plywood

Cylinder Chair.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Cylinder chair to provide support for the child, especially for a child with cerebral palsy; the back prevents the child from falling backwards when bringing the hand toward the mouth. Chair cut from cylinder of thick reinforced cardboard with a thick disk of the same material as a seat. The chair can be padded with foam and covered with a washable material. Includes drawings. SKILLS REQUIRED: Assembly. AUTHOR: Finnie, N R TITLE: Handling the Young Cer

Cylinder Chair.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Chair with cylindrical back and sides to provide support for the trunk and encourage the child' s shoulders forward. Chair made with wood and a cardboard cylinder. Lists materials needed and provides instructions for constructing the chair, which can be made with a removable pommel. SKILLS REQUIRED: Woodworking. AUTHOR: Hartrick, J TITLE: Equipment to Make: A Guide for Parents with a Child who has a Physical Disability REF: Melbourne, Australia: Health

Daessy Accessible Workstation - Double Surface Table

The Daessy Accessible Workstation - Double Surface Table is a height adjustable computer desk designed for use by individuals with mobility disabilities or spinal cord injury. This workstation has two independently height- adjustable surfaces with clear access underneath for a user seated in a wheelchair. The frame is made from welded, plastic-coated tubular steel, and the table surface is made from arborite laminated MDF board. OPTIONS: CPU bracket, double locking casters, front surface tilt an

Daessy Accessible Workstation - Single Surface Table

The Daessy Accessible Workstation - Single Surface Table is a height-adjustable computer desk designed for use by individuals with mobility disabilities, spinal cord injury, or low vision. The height-adjustable work surface makes this table accessible to a user seated in a wheelchair, while an optional keyboard surface allows users with low vision closer access to a monitor located on the main surface. The frame is made from welded, plastic-coated tubular steel, and the table surface is made fro

Decubitis Pad

The Decubitis Pad is made of washable Fortrel polyester pile. DIMENSIONS: 20 x 24, 24 x 30, 30 x 40, and 30 x 60 inches.

Decubitus Pad

The Decubitus Pad is made of Fortrel polyester pile and designed for either the seat or back of a wheelchair. The pad is washable. Wheelchair accessories include back/seat cover, armrest, leg support cover, and paddle pad cover.

Decubitus Pad

The Decubitus Pad is designed to allow air circulation to aid in the healing of pressure sores. This pad is made of polyester fibers for softness and resiliency. DIMENSIONS: Available in a choice of 16 x 18 inches, 24 x 30 inches, 30 x 40 inches, or 30 x 60 inches.

Decubitus Pad

Standard or heavy weight kodel pile bed pads. Washable. Sizes: 15 by 18 inches, 24 by 30 inches, 30 by 40 inches, 30 by 60 inches.

Decubitus Pad (Models 0034 & 0036)

The Decubitus Pad is designed to protect against pressure sores. The polyester pile pad is flame retardant, washable, and autoclavable. DIMENSIONS: Model 0034 is 30 x 40 inches and model 0036 is 30 x 60 inches.

Delta Ultra Light 1000 Full-Electric Bed (Model 15033)

The Delta Ultra Light 1000 Full-Electric Bed, model 15033, is a motorized bed designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. This bed can be raised and lowered at three independent points, the head, knee and foot, and the entire bed can be raised and lowered to facilitate transfer. The headboards and footboards are interchangeable with Drive's and some other manufacturers bed ends. FRAME: The frame includes woodgrain head- and footboards and

Delta Ultra Light 1000 Full-Electric Low Bed (Model 15035)

The Delta Ultra Light 1000 Full-Electric Low Bed, model 15035, is a motorized bed designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. This bed can be raised and lowered at three independent points, the head, knee and foot, and the entire bed can be raised and lowered to facilitate transfer. The headboards and footboards are interchangeable with Drive's and some other manufacturers bed ends. FRAME: The frame includes woodgrain head- and footboards

Delta Ultra Light 1000 Semi-Electric Bed (Model 15030)

The Delta Ultra Light 1000 Semi-Electric Bed, model 15030, is a motorized bed designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. This bed can be raised and lowered at three independent points, the head, knee and foot, and the entire bed can be raised and lowered to facilitate transfer. The headboards and footboards are interchangeable with Drive's and some other manufacturers bed ends. FRAME: The frame includes woodgrain head- and footboards and

Deluxe Blanket Support

The Deluxe Blanket Support is a blanket support designed for use by individuals with fractures of the foot, burns, pressure sores/ulcers, or sensitive skin. Made of aluminum, the blanket support is designed to hold blankets away from the feet. It folds flat when not in use. DIMENSIONS (HxW): 1.5 x 12 inches. WEIGHT: 1 pound.

Deluxe Contour Pillow (Model N7108S)

The Deluxe Contour Pillow, model N7108S, is designed to support the neck, head, and shoulders. The pillow has a high-density foam base and a convoluted foam surface. A zippered cover is included. COLOR: White cover.

Deluxe Convalescent Recliner

The Deluxe Convalescent Recliner is a recliner chair designed for use by individuals who require support while sitting. This chair can be adjusted and locked in three positions: upright, with the footrest elevated, and fully reclined. It has a high back headrest, padded arms, and oversized casters. The large, molded plastic tray attaches to the arms, slide ajusts, and can be stored on the chair back. The cushions are covered in mildew resistant vinyl. A built-in moisture barrier prevents seepage

Deluxe Folding Personal Worktable

The Deluxe Folding Personal Worktable is a height adjustable tilt top worktable designed for use by individuals who use wheelchairs. This table is height- and tilt-adjustable and hand knobs adjust and secure its telescoping legs. The top tilts from 0 to 45 degrees. The scratch-resistant melamine top has a half-moon cutout for accessibility and an outer rim to protect against spills. The table folds flat for storage. DIMENSIONS: Table height adjusts from 29 to 44 inches. The tabletop measures

Deluxe Foot Stool (Model 6350)

Footstool, anodized aluminum legs extend past stepping area t prevent tipping. Top is 1/8 corrugated rubber matting with vinyl molding around rim. Nonskid rubber tips on legs. Height 9 inches, top 14 by 10 inches, width 18 1/2 inches, depth 14 inches, weight 5 1/2 pounds.

Deluxe Guard Rail Pads (Models 5605, 5605W, 5606, & 5607)

Deluxe Guard Rail Pads are side rail pads designed to prevent injury from bed side rails. Designed to provide maximum cushioning and protection, these pads are made of durable, firm foam and covered with soft, soil-resistant vinyl. The pads attach wih quick-release buclkes. Model 5605W features a vinyl window that runs the length of the pad, enabling the user to see out. DIMENSIONS: Models 5605 and 5605L are 72 inches long. Model 5606 is 60 inches long and model 5607 is 43 inches long.

Depend Underpads

Depends Underpads are bed underpads designed to protect beds, chairs or other surfaces from wetness. These padsfeature a three-layer absorbency system and a waterproof backing with sealed edges for optimum protection. The soft, stay-dry liner protects the skin. DIMENSIONS: 23 x 36 inches.

Desk And Television Cabinet

CUSTOM ADAPTATIONPURPOSE: To prevent children and adults with cognitive disabilities and poor impulse control from throwing the desk and television. Made of laminate for durability and ease of maintenance, this wall-mounted corner desk features a return on one side and a television cabinet bolted to the corner section. Wide support legs extend to the floor at either end and in the center. Loxson bolts anchor the desk to the wall and the cabinet to the desk. The cabinet is divided into two secti

Desk Chair

DO-IT-YOURSELF-ENTRY --- PURPOSE: To create an adjustable, mobile desk chair that assists with standing. A barber’s chair was fixed to a homemade wooden platform equipped with casters and a hydraulic unit attached. The chair can be raised and lowered while in use by pulling on a rope attached to the foot lever or pushing on the lever with an inverted cane. The user can also use it to assist with standing by maneuvering the chair into place, stabilizing the user’s knees, and rising. MATERIALS: Ba

Desktop Desk

The Desktop Desk is an adapted desk or table adapter designed for use by individuals with fine motor, orthopedic, or mobility disabilities. Placed on top of a table or other table-like surface, this lightweight, portable unit provides a large, stable writing surface with adjustable heights and angles. The unit's clear plastic, removable and erasable writing surface allows for templates to be used in writing practice or for tracing art. An accessory tray attaches to either side of the unit and pr

Diabetic Thermoskin Foot Gauntlet (Model 8*232)

The Diabetic Thermoskin Foot Gauntlet, model 8*232, is a foot warmer designed for use by individuals with circulatory disabilities or diabetes. This foot warmer helps to provide warmth to cold feet and problem areas caused by poor circulation. It has a trioxin lining, a rubberized center layer, and a mylon outer layer. The trioxon lining captures body heat and elevates the skin temperature. The rubberized safety sole and an adjustable hook-and-loop closure keep it in place. This foot warmer can

Diamond Homecare Bed

The Diamond Homecare Bed is a motorized bed designed for use by individuals with obesity and severe physical or mobility disabilities or spinal cord injury. This bed is available in semi-electric and full electric models with Trendelenburg, Reverse Trelenburg, and cardio-chair positions. The bed has two electric drive modules and is equipped with a manual emergency crank and a hand control. The bed deck is thermoformed plastic. The frame splits in half for transportation and assembly and has fou

Dining Chair Securing System

CUSTOM ADAPTATIONPURPOSE: To prevent chairs around a dining table from being moved by a child with developmental disabilities. The system involves three straps, two at each end of the rectangular table and one in the center. The end straps are bolted to the table legs at either side and run across the table and through the side arms of each chair. The middle strap runs across the surface of the table and around the other side of the chairs. Unbuckling one side strap and the center strap frees th

Dining Chair With Torso Support

CUSTOM ADAPTATION PURPOSE: To provide support while eating for an individual with Parkinson's disease who leans to the right when fatigued. The dining chair was created from a standard office chair with a high back and a central metal back post. Because the chair was intended only for use over short periods, a single thoracic fin was added to adapt the chair, rather than the usual pair of fins. A plywood mounting plate was fixed to the right armrest and the back of the seat with metal brackets.

Disposable Bedpads (Models 6144, 6172, 6327, & 6328)

The Disposable Bedpad is a bed underpad designed to prevent moisture from reaching the mattress. It has a nonwoven top, absorbent cellulose center, and a plastic back. DIMENSIONS: 23 x 36 inches (Bag of 25: 6144, Box of 150: 6172); 17 x 24 inches (Box of 25: 6327, Box of 300: 6328)

Diy Adjustable Tray

---- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself adjustable tray for a child with severe disabilities to use drawing, coloring, etc. This DIY tray is a PVC frame with a leg in the middle to allow for angle adjustment. The tray is created from a piece of shower board which is cut to the size needed. The child is then measured and a cutout added to go around the child. The PVC frame is a little smaller than the tray itself and is attached to the tray using Velcro. A drill an

Diy Computer Desk

---- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself accessible computer desk for an individual with Amyotrophic Lateral Sclerosis (ALS). This do-it-yourself computer desk is adapted from Sauder assemble-it-yourself furniture. First, the bookshelf was assembled according to instructions and necessary for getting the proper measurements for the height needed for the desktop. The desktop was constructed from 30 by 30 inch sheet of ¾ inch plywood. The length of the desktop can be

Dogbone Pillow

The Dogbone Pillow is a contoured pillow designed for use by individuals with neck disabilities. This washable fleece-covered, dogbone-shaped foam pillow cradles the head and neck while the user is seated in an upright position.

Dolphin Air Mat (Model 1324)

The Dolphin Air Mat, models 1325 and 1326, is an air flotation mattress designed to provide vestibular or proprioceptive stimulation for individuals with a physical disability. It is also good for working with postural adjustments, sensory stimulation, motor planning tasks, weight shifting exercises, equilibrium responses and balance activities. OPTIONS: The Dolphin Tactile Pad, model 1323, is a reversible patchwork pillowcase of four different textures available for $59.00. DIMENSIONS: Uninflat

Doodlebug Insert (Model 1065)

The Doodlebug Insert, model 1065, is a back support cushion designed for use with Kay Kinder Chairs (see separate entry, as well as other positioning chairs and high chairs. This terry cloth covered foam support also reduces the width and depth of the chair, enabling it to be used by smaller children. The cover can be unzipped and remove for washing. COLOR: Red or light blue.

Double Bed Hand Bed Assist (Model 135)

The Double Bed Hand Assist, model 135, is a grab bar for bed designed for use by individuals with mobility or balance disabilities. This tubular metal frame fits between the bed base and the mattress, offering a rigid handle on either side of the bed. DIMENSIONS: The width is adjustable to fit a 3-foot twin bed through a 5-foot double bed. The height of handle from mattress base is 440 millimeters (mm) and the overall length is 335 mm.

Double Medical Sheepskin (Model 105)

The Double Medical Sheepskin, model 105, is a decubitus pad designed for use by individuals at risk for pressure sores or ulcers. This tanned natural sheepskin is machine washable and dryable. It can be used in hospital and nursing home beds, wheelchairs, and in homes on chairs and beds. DIMENSIONS (LxW): 6 x 2.5 feet average size. COLOR: Natural.

Double Wide Rock 'n Stop Footrest

The Double Wide Rock 'N Stop Footrest is a footstool designed for use by individuals with circulatory disabilities or those who spend long periods sitting at a desk. Designed with an extra-wide surface to accommodate a more natural leg spread, this footrest features corrugated rubber rockers that allow for smooth motion as well as steady positioning at a desired footrest angle, a platform constructed of MDF covered with durable vinyl, and channels across the surface of the platform that provides

Doze

---- PROTOTYPE --------- PURPOSE: To design a prototype of a sleep positioner for children with disabilities, particularly those children who experience muscle tension and loss of muscle tone. Doze is a sleep positioner that assists with side-lying posture at bedtime. The pod-like design decreases the risk of sleeping in awkward positions that may interfere with growth, put pressure on the spine, as well as affect air flow resulting in breathing problems. The Doze design is inspired by the armad

Draw Sheet (Models 6177 & 6178)

The Draw Sheet is a waterproof sheet designed to protect bedding from moisture. The draw sheet is non-skid, reversible, flameproof and hypoallergenic. DIMENSIONS: 36 x 54 inches (6177), 36 x 72 inches (6178).

Drawer And Cabinet Pulls

DO IT YOURSELF ENTRYPURPOSE: To enable individuals with upper extremity disabilities or tremors, arthritis, or grasping or fine motor disabilities to open cabinets and other doors. Included in a chapter entitled "Kitchen & Meal Time," this article describes how cabinet door knobs and drawer pulls can be replaced with D-shaped handles to facilitate grasping. A D-handle can also be attached to the door of a front-loading dishwasher for easier opening. Attaching a loop of rope or webbing to a D

Drawer Pulls

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with limited grasp to open drawers with knob pulls. The knobs can be removed and a length of parachute cord (available in hardware stores) threaded through the holes and knotted inside the drawer. In lieu of removing the knobs, cut a length of cord several inches longer than the distance between the two knobs, then form and knot a loop at each end large enough to slip over the knobs. MATERIALS: Parachute cord. AUTHOR: Labbe, A. TITLE: Que

Dream Series Hi Side Bed (Models 1200, 1700, 1900, 2200 & 2700)

The Dream Series Hi Side Bed, models 1200, 1700, 1900, 2200 and 2700, is an enclosed bed designed designed to prevent individuals with cognitive, emotional, or behavioral disabilities or autism from leaving the bed without the use of restraints. This bed features solid wood construction and an enclosure that extends 32 inches above the mattress (up to 40 inches when mattress is lowered on model 1900). It has a poly resin coated Bunkie board. There is a door on one side of the bed that locks on t

Dream Series Standard Side Bed (Models 1200, 1700, 1900, 2200 & 2700)

The Dream Series Standard Side Bed, models 1000, 1500, 1800, 2000 and 2500, is an enclosed bed designed designed to prevent individuals with cognitive, emotional, or behavioral disabilities or autism from leaving the bed without the use of restraints. This bed features solid wood construction and an enclosure that extends 20 inches above the mattress (up to 30 inches when mattress is lowered on model 1900). It has a poly resin coated Bunkie board. There is a door on one side of the bed that lock

Dresser Drawer Handle

DO IT YOURSELF PURPOSE: To make dresser drawers easier to open for senior and individuals with arthritis, use of only one hand or fine motor or grasping disabilities. The existing knobs can be removed and replaced with a small towel bar, creating a single handle that extends across the drawer and enables the user to open the drawer with one hand. MATERIALS: Small towel bars. TOOLS: Screw driver and drill. SKILLS REQUIRED: Basic carpentry skills. AUTHOR: Greenstein, D. TITLE: Dressers and Knobs.

Dresser Drawer Knobs

DO IT YOURSELF PURPOSE: To make dresser drawers easier to open for senior and individuals with arthritis or fine motor or grasping disabilities. Drawers with small round knobs can be difficult to open. For easier grasping, the knobs can be removed and replaced with larger knobs intended for use on cabinet doors. Cabinet knobs are available in a range of styles and sizes, so can be selected to make grasping easier for the intended user. For example, a larger square knob may be more accessible th

Dresser Drawer Pull

DO IT YOURSELF PURPOSE: To make dresser drawers easier to open for senior and individuals with arthritis, use of only one hand or fine motor or grasping disabilities. The existing knobs can be removed and replaced with eye bolts with a piece of soft rope or cord tied between them, creating a single handle that extends across the drawer and enables the user to open the drawer with one hand. A modification of this option would be to leave the existing knobs in place and tie the rope between the k

Dressing Table

DO IT YOURSELF -- PURPOSE: To make daily grooming tasks more accessible to individuals who use wheelchairs or who are unable to stand for long periods. This article, included in a chapter entitled "Bedroom & Getting Dressed," provides suggestion for creating an accessible vanity and personal grooming area. Suggestions include using a small, sturdy table with a comfortable seated height and sufficient knee clearance for a dressing table. If needed, select a chair that meets the user's specifi

Dual Support Cervical Pillow.

The Dual Support Cervical Pillow is a cervical pillow designed for use by individuals with neck pain or injury. This pillow has bolsters for separate head and neck support. The pillow is polyester filled and uses a standard pillowcase. DIMENSIONS: 20 x 17 inches.

Dublup (Models 9Dlp1, 9Dlp2, & 9Dlp3)

The Dublup is large geometric shapes designed for use with children with severe physical or neurological disabilities. Supplied in two sections, these foam-filled PVC shapes can be combined to create a variety of large shapes. SIZES: Size 1, model 9DLP1, is suitable for children up to four years of age. Size 2, model 9DLP2, is suitable for children from four to nine years of age. Size 3, model 9DLP3, is suitable for children nine years of age and older. DIMENSIONS (HxLxW): Size 1 is 10 x 48 x 15

Dublup Ballpool

The Dublup Ballpool is ball flotation therapy designed for use with children with neurological, balance, or mobility disabilities. The Ballpool walls are created by joining two Dublup Size 1 shapes (see separate entry). The unit is then lined by attaching the included ball sack inside the walls with Velcro to complete the pool, which can then be filled with the included 800 balls. OPTIONS: An additional sack of balls is included. DIMENSIONS: The pool is 57 inches in diameter. COLOR: The balls co

Duo Clinne Dual Function & Contoured Bed Wedge

Eggcrate foam contoured positioning wedge for elevation of upper body. Combination lumbar, cervical roll supports lumbar region while sitting and cervical spine while sleeping. Polyurethane foam. White cotton/poly cover.

Durachair 1000

Durachair 1000 is a geriatric chair with wheels. The chair has a furniture-grade PVC tubular frame that provides support without sharp edges; a multi-position backrest and multi-position legrest that operate independently; non-absorbent waterproof fabric covers; twin wheel casters; and a safety belt. DIMENSIONS (HxLxW): 48 x 48 x 24 inches. Casters are 4 inches in diameter. WEIGHT: 38 pounds. COLOR: White frame. Fabric or solid vinyl upholstery is available in a variety of colors.

Duro-Med Plastic Bed Tray (Model 4070)

The Duro-Med Plastic Bed Tray, model 4070, is designed of heavy duty plastic with folding legs and a recessed well for glass. DIMENSIONS: (W x L x H) 15 1/4 x 21 3/4 x 8 1/2 inches. COLORS: almond, blue, white.

Duro-Med Waterproof Sheeting (Model 8040)

Duro-Med Waterproof Sheeting, model 8040, is a waterproof sheet designed to protect mattresses from moisture. It has a non-skid reversible surface which is odor-proof, hypo-allergenic, flameproof and autoclavable. SIZES: 36 x 36, 36 x 45, 36 x 54, 36 x 66, 36 x 72 inches; also available in 36 inches x 12 yard and 36 inches x 25 yard rolls.

Dynamic Flotation System DFS

Mattress for standard hospital bed frames. AUTO-MATT sensor pad automatically adjusts support pressure of air flotation system. Weighs 32 pounds.

E-Z Cervical Pillow (Model N7101) & E-Z Plus Cervical Pillow (Model N7102)

The E-Z Cervical Pillow, model N7101, is a cervical pillow designed to provide proper neck positioning. This pillow combines soft, medium, and firm densities for correct sleeping posture on the back. The E-Z Plus Cervical Pillow, model N7102, has a center cut for four sleeping positions. Contoured foam with polyester fill ensures proper cervical alignment. Both models come with a removable zippered cotton/poly cover. DIMENSIONS (WxL): Model N7101 is 17 x 20 inches and model N7102 is 17 x 25 inch

E-Z Glide Series Adjustable Table Bases

The E-Z Glide Series Tables are accessible tables and adjustable-height work tables designed for people who use wheelchairs. The 1700 Series adjusts from child to adult height, the 1800 Series adjusts from standard to wheelchair height, and the 1900 Series adjusts from restaurant to bar height with a stop at standard wheelchair height. The E-Z Glide mechanism incorporates a patented design and gas cylinders to facilitate table adjustment. A knob adjustment allows the tables to change heights and

Easy Adjust Overbed Table (Model 6411)

Chrome plated square tubular leg and base, 4 casters. Spring tension height adjustment with positive corner lock, 27 to 44 high. Table surface, 15 by 30 inches. Tilts either direction, plunger release lock, 5 positions.

Easy Comfort Lift Chair (Model Lc200)

The Easy Comfort Lift Chair, model LC200, is a seat lift and recliner chair designed for use by individuals with physical or mobility disabilities. The chair has a two-position all-electric lift and reclining mechanism with a button control, which either tilts the user back to rest, or rises to help the user stand. The chair has a hardwood frame, a heavy-duty steel lift mechanism, and a wide seat with soft fabric. POWER: Uses household current, with integrated emergency battery backup. CAPACITY:

Easy Risers

Easy Risers are cone-shaped leg extenders designed to assist individuals with arthritis, neurological, mobility and balance disabilities in rising from a seated position. These hardened plastic cones can also be used to elevate the head of a bed for individuals with respiratory disabilities or acid reflux or related conditions. The risers can also be used to elevate the back legs of a chair to aid individuals in shifting their weight over their feet to aid in rising. Other uses include elevating

Eclipse Pillow, The

The Eclipse Pillow, model N7104, is a contoured pillow designed to provide neck support. This pillow is filled with fiberfill and has a contoured design with a recessed center. DIMENSIONS (WxL): 17 x 20 inches.

Econo Float Ii Water Flotation Mattress

The Econo Float II Water Flotation Mattress is a water filled mattress surface designed to be installed on top of a regular hospital bed mattress. The filling valve is wide mouthed and has a no-leak screw-on cap. A repair kit is included for small punctures. WARRANTY: 12 month warranty.

Economy Bed Pad

The Economy Bed Pad is a bed pad and incontinence pad designed for individuals with incontinence. This pad is made with a quilted top cloth for absorbency and comfort combined with a waterproof liner. The pad provides protection for every-night mattress use or on household furniture. The pad can be machine washed and dried. COLORS: Light blue top with white liner.

Economy Convoluted Mattress Pad

The Economy Convoluted Mattress Pad is an eggcrate foam mattress surface designed to promote even distribution of body weight to minimize pressure. The flame-retardant pad features single-layer construction. SIZES: Hospital bed. DIMENSIONS (WxL): 34 x 72 x 1.75, 3, or 4 inches. COLOR: Blue.

Economy Folding Bed Board (Models 1924 & 1928)

The Economy Folding Bed Board, models 1924, 1928, is a bed board designed to provide extra support underneath a mattress. The bed board is made of heavy-duty triple wall 1100 pound test board and has 4 folding sections. DIMENSIONS: model 1924, 24 x 60 inches; model 1928, 30 x 60 inches.

Economy Walsall Trolley

Economy Walsall Trolley is designed for use by individuals with generalized weakness, decreased strength and coordination associated with fractures, multiple sclerosis or other neurological disorders.   This trolley has a steel frame with angled handles to provide improved grip and stability.  The shelves have open sides for easy transfer of plates and dishes, and rubber castors give control on any floor surface.  Adjustable version features telescopic legs which adjust when pin clips are remove

Educube

The Educube is a child's chair designed for use by children aged 3 years and older. Use of the Educube encourages social interaction as well as gross and fine motor skill development. They are sturdy and easily cleaned. The seat height can be changed by turning the cube over. DIMENSIONS (HxLxW): 15 inches x 15 inches x 15 inches. The seat height is 6 or 9 inches depending on the side used. COLOR : Choice of yellow or blue.

Edutray

The Edutray is a tray for armchair designed for use with an an Educube (see separate entry) to provide a play or eating surface close to the child. The legs fold for storage. DIMENSIONS (LxW): 21 x 14 inches. WEIGHT: 7 pounds. COLOR: Blue and white.

Elastic Mesh Side Rail Protectors (Model 5707 & 5707H))

The Elastic Side Rail Protectors, model 5707 and 5707H, are side rail pads designed to prevent injury from entrapment in bed side rails. This product features pads for two side rails connected by a one-piece under-mattress section. Each pad covers a rail and fills the gap between the rail and the mattress. Designed to fit most healthcare facility beds, these machine-washable covers stretch to fit the rails, expand and contract during bed positioning, and allow access to control buttons. DIMENSIO

Elasto-Gel Cast & Splint Pads

The Elasto-Gel Cast & Splint Pads are orthoses liners designed to be used under casts, splints, pressure suits and garments, masks and dressings; to stabilize braces, orthotic and prosthetic devices; as padding for the prevention and treatment of decubitus ulcers; and to protect skin grafts. The pads are made from a formulated hydrogel which contains a natural skin moisturizer/conditioner. This hydrogel has properties which allow it to absorb excess perspiration from the skin and transmit it

Elasto-Gel Cervical Pillow (Model Tp-1Hc)

The Elasto-Gel Cervical Pillow provides support and hot or cold therapy to the neck and upper spine area. The pillow consists of contoured urethane foam for support, and is fitted with gel inserts that won't leak if punctured. For cold treatments, the pillow can be chilled in a freezer; for heat therapy, pillow can be warmed in a microwave oven. The pillow will retain temperature for 20 to 40 minutes. The washable cover is made of satin and has velcro closures. DIMENSIONS: 12 x 10 x 2.5 inches o

Elasto-Gel Lumbar Pillow (Model L1Hc)

The Elasto-Gel Lumbar Pillow is a low back orthosis that can provide hot or cold therapy. The pillow is made of contoured urethane foam for support and fitted with a gel insert. For cold treatments, pillow can be chilled in a freezer; for heat therapy, pillow can be warmed in a microwave oven. The pillow will retain the temperature for 20 to 40 minutes. The velour cover is washable and has velcro closures. DIMENSIONS: 14 x 13 x 3.5 inches overall; inserts are 8 x 12 inches. COLOR: Navy blue.

Electric Blanket Control

CUSTOM ADAPTATION PURPOSE: To enable an individual with quadriplegia to control the temperature of an electric blanket. This project was designed to enable the user to regulate the temperature of the blanket within a narrow predetermined range. A commercially-available electric blanket was purchased and a commercial thermostat was added to the blanket's existing controls. The thermostat sits in a separate plastic box with a dial control for the temperature. Using the original transformer box, t

Electric Height Adjustable Activity Table

The Electric Height Adjustable Activity Table is a powered height adjustable work table designed for use by individuals who use wheelchairs. Height adjustment is achieved with push-button controls. Both models have a laminate top and an extruded aluminum base. DIMENSIONS (HxLxW): 27 to 39 x 48 x 30 inches or 28 to 34 x 60 x 30 inches. COLOR: Maple top. WARRANTY: Two-year warranty.

Electric Work Table (Model 4375)

The Electric Work Table, model 4375, is a powered height adjustable work or therapy table designed for use by wheelchair users. This height-adjustable table has a direct-drive lift mechanism that elevates the tabletop and a pedestal design that allows wheelchair access, and a hand-control panel mounted on the underside of the tabletop. The table has a high-pressure laminate top with a natural oak finish and protective molding along the edges. It can can accommodates two wheelchairs and up to fiv

Elevated Crib

CUSTOM ADAPTATION PURPOSE: To enable an individual with a spinal cord injury to care for her baby. A standard wooden crib with a drop front was purchased and adapted. First the legs were exended using matching wood to provide the necessary wheelchair clearance. The drop front was then removed and cut in half to form two gates. Once the front corner posts were reinforced with steel brackets, the gates were attached with swinging bar hinges. The gates stay open until they self-close after an init

Elevating Bed Wedges (Series 5530)

The Elelvating Bed Wedges, series 5530, are positioning wedges designed to elevate the head or legs of individuals with breathing, circulatory, lower extremity, or back disabilities. These foam wedges are available with or without a cloth covers. DIMENSIONS: 7.5 x 27 x 24 inches, 10 x 27 x 24 inches, or 12 x 27 x 24 inches.

Elevating Chair

CUSTOM ADAPTATION PURPOSE: To enable an individual with muscular dystrophy to rise from a chair independently. The user required a chair that would raise him almost to a standing position and enable him to wiggle off the seat while adjusting the height as needed. A commercially-available swiveling, reclining armchair was purchased and mounted on a castored steel base equipped with a motor, gearbox, and power screw. A square metal tube frame was added to the base to support the chair, retaining

Elevating Leg Rest

The Elevating Leg Rest is a positioning wedge designed to provide relief from swelling in the legs and to maintain a pelvic tilt position to relieve stress on the spine. This wedgefeatures a slanted front to support the thighs. A zippered machine-washable cover is included. DIMENSIONS: 20 x 26 x 8 inches. COLOR: The cover is available in blue or white.

Elevating Leg Rest (Model N6500)

The Elevating Leg Rest, model N6500, is a wedge pillow designed for use by individuals with lower extremity or circulatory disabilities. The tapered front supports the thighs while the rest of the pillow elevates the lower legs. A washable, removable cover is included. DIMENSIONS: 20 x 26 x 8 inches. COLOR: Blue.

Elevating Office Chair

The Elevating Office Chair is an adjustable height chair designed to enable a person with a disability to easily reach a standard kitchen countertop. The modified office chair is mounted on a two-ton car jack. The car jack is operated by extension handles that are easily reached by the user. The unit is mounted on castors from the original chair. PROTOTYPE DEVELOPMENT: Designed by Frank Heminsley for wheelchair users who have standard height kitchen countertops and cannot reach them from a wheel

Enfold Comfort Chair

The Enfold Comfort Chair is a geriatric chair designed for use by individuals with Alzheimer's disease, dementia, or mobility or balance disabilities. The deep back design makes unassisted departure difficult to deter wandering or unassisted mobility. The chair is covered in moisture-proof fabric and the seating area has a sanitized Medi-Flextra vinyl, which is resistant to microbial attacks and broad-spectrum gram positive and negative bacteria. The seating area is also double high-frequency we

Enfold Rollabout Chair

The Enfold Rollabout Chair is a wheeled, reclining geriatric chair designed for individuals with severe physical or neurological disabilities, spinal cord injury, or Alzheimer's disease. Specially angled for comfort, this chair is equipped with a four-position leg rest. This chair is fitted with casters, one of which is directional for steering. The incontinence-proof seat is covered with a sanitized Medi-Flextra vinyl that is highly resistant to microbial attacks and broad-spectrum gram positiv

Enhansit (Model Ulf-3)

EnhanSit, model ULF-3, is an electronic seat lifting system that attaches to the bottom of recliners for use by persons with arthritis or mobility, lower extremity, balance, or neurological disabilities. This steel-frame system is engineered to offer full reclining and lifting capabilities while not interfering with or damaging the chair's existing features. The unit ships fully assembled and attaches to the bottom of rocker, wall-hugging, and stationary or simple push back recliners. The unit i

Equity (Model 1317)

The Equity, model 1317, is a bi-level computer work center and height adjustable work table designed for use by individuals who use wheelchairs in schools, colleges, and other multi-user environments. The height adjustment, which is accomplished with a retractable hand crank, provides access for individulas who stand or use standing aids while working. The worksurface/ keyboard level and the upper monitor level are independently height adjustable. The standard table has laminate tops, anodized a

Equity (Model 4240)

The Equity, model 4240, is a bi-level computer work center and height adjustable work table designed for use by individuals who use wheelchairs in schools, colleges, and other multi-user environments. The height adjustment, which is accomplished with a retractable hand crank, provides access for individuals who stand or use standing aids while working. The worksurface/ keyboard level and the upper monitor level are independently height adjustable. The standard table has a laminate tops, anodized

Equity (Model 4830)

The Equity, model 4830, is a single-surface computer work center and height adjustable work table designed for use by individuals who use wheelchairs in schools, colleges, and other multi-user environments. The height adjustment, which is accomplished with a retractable hand crank, also provides access for individuals who stand or use standing aids while working. The standard table has a laminate top, anodized aluminum pedestal, and steel feet. OPTIONS: Solid wood veneers, PVC vinyl edge treatme

Ergo-Comfort Adjustable Footrest (Models 2105 & 2106)

The Ergo-Comfort 5-Inch and 8-Inch Adjustable Footrest, models 2105 and 2106, is a footstool designed for use by individuals with lower extremity or circulatory disabilities. This adjustable footrest elevates the feet of a user sitting in a chair. The angle foot pad can be moved on the frame to improve circulation by allowing repositioning of legs and feet while the footrest is in use. The unit has a steel frame with a vinyl covered footpad. DIMENSIONS (HxDxW): is 5 x 11.5 x 18.5 inches (Model 2

Ergo-Wise Foot Rest (Model 6105)

The Ergo-Wise Foot Rest, model 6105, is a footstool designed for use by individuals with circulatory disabilities or those who spend long periods sitting at a desk. This foot rest is ergonomically designed to support proper posture, and relieve stress on the legs, back, and neck. Features include textured rollers that move automatically allowing the user various leg positioning options, angle adjustment knobs that tighten to stabilize the platform in a desired tilt position. The knobs can be loo

Ergochair For Little People

The ErgoChair is a fully adjustable chair designed by and for individuals of short stature to reduce back ache and other discomforts associated with sitting in a larger chair. This desk chair feautres adjustable height, a back rest which adjusts for height and angle, a 10-degree seat tilt adjustment, and foot rest. The unit adjusts so that the back rest supports the back while allowing the knees to bend at the edge of the seat. The height of the chair can be adjusted to raise up to a regular-siz

Ergolife Tablet Dining Table(Model Gc3-42)

The Ergolife Tablet Dining Table, model GC3-42, is a wheelchair accessible table designed for use in cafeterias or in family, common, activity or dining room settings in long term care facilities and hospitals. The table is pre-drilled so an optional tablet can be attached on any side for wheelchair access. Tops are available in solid hardwood, melamine, or high pressure laminate. The legs are heavy duty steel. DIMENSIONS (HxDxW): 29.5 x 42 x 42 inches. Custom heights are available.

Ergonomic Office Chair With Headrest

The Ergonomic Office Chair with Headrest is an adjustable office chair designed to provide, neck, back, and head support for individuals while working at a desk. Ergonomically designed, this chair features pneumatic seat height adjustment, 360-degree swivel, tilt tension adjustment, and tilt to lock chair in upright position. A two-to-one synchro-tilt (back reclines at two-to-one ratio to seat angle) allows the user to recline while keeping seat cushion relatively level to the floor. Other feat

Essential Aluminum Blanket Support (Model P2400)

The Essential Aluminum Blanket Support, model P2400, is a blanket support designed for use by individuals with lower extremity or neurological disabilities or spinal cord injury. The base of this height-adjustable frame fits under the end of the mattress, allowing the support to keep the weight of the sheet and blanket off the feet and legs. DIMENSIONS: The height adjusts to 20 inches.

Essential Bed Wedges (Models F1575-2, F1510, & F1512)

The Essential Bed Wedges are back rests designed for use by individuals with spinal cord injury, respiratory disabilities, or digestive conditions. These high-density foam wedges offer a 30-degree incline and can be used to elevate the head or the legs. A washable, replacable zippered cover is included. OPTIONS: Replacement covers are available. DIMENSIONS: Model F1575-2 is 24 x 26 x 7.5 inches deep. Model F1510 is 24 x 26 x 10 inches deep. Model F1512 is 24 x 26 x 12 inches deep. COLOR: The cov

Essential Convoluted Foam Bed Pads (Models F7220, F7201, F7243, F9010E, F9011E, F9012E, F90001E, F9004E, F9007E, F9002E, F9005E, F9008E, F9003E, F9006E, & F9009E)

The Essential Convoluted Foam Bed Pads are foam mattress surfaces designed for use by individuals at risk for pressure sores or pressure ulcers. These fire retardant, dense pads have a thick base that ensures pressure reduction and air circulation. SIZES: Models are available for hospital beds (no. F7220, F7201, and F7243) and twin (no. F9010E, F9011E, and F9012E), full size (no. F9001E, F9004E, F9007E), queen size (F9002E, F9005E, and F9008E), or king size mattresses (no. F9003E, F9006E, and F9

Essential Full Bed Rails (Model P1400)

The Essential Full Bed Rails, model P1400, are hospital bed side rails designed for use by individuals with spinal cord injury, mobility disabilities, and emotional disabilities. These chrome-plated rails install without tools and feature a spring-loaded cross bar and telescoping side rails. OPTIONS: An adapter for Sunrise grid frame beds is available. DIMENSIONS: The cross bar adjusts from 37 to 43 inches wide and the side rails adjust from 42 to 72 inches long.

Essential Half Bed Rails (Model P1450-1)

The Essential Half Bed Rails, model P1450-1, are hospital bed side rails designed for use by individuals with spinal cord injury, mobility disabilities, and emotional disabilities. These chrome-plated rails install without tools and can be used at the top or the bottom of the bed. DIMENSIONS (LxH): 36 x 18 inches.

Eurotech Adjustable Intensive Task Chair

The Eurotech Adjustable Intensive Task Chair is an office chair with height adjustment designed for use by individuals who require position changes throughout the day. This seat is designed to provide ergonomic comfort, tension control, and lumbar support for individuals who sit at a desk all day. The seat is covered in 100 percent olefin fabric and has a thick foam cushion. Other features include pneumatic height control; a swivel, tilt seat; an adjustable-height ratchet back; independent back

Evacupod Overlay (Models Evp 1 & Evp 100)

The Evacupod Overlay, models EVP 1 and EVP 100, is an emergency evacuation system that serves as a foam mattress overlay when not in use. The Evacupod Overlay is made of pressure-relieving, visco-elestic memory foam covered by quilted, 4-way stretch antimicrobial sheeting. It attaches to the mattress of a standard hospital bed with four elastic straps that fit over the mattress corners. In case of emergency, the Evacupod Overlay is detached from the mattress and secured around the user using thr

Evolution Desk With Adjustable Legs

The Evolution Desk with Adjustable Legs is a height-adjustable desk designed for use by individuals who use wheelchairs. This desk has adjustable legs that match the perforated steel panels with holes in one-inch increments. The work surface is covered with laminate which wraps around the full bullnose style front edge. OPTIONS: Flat panel monitor arm, adjustable CPU sling. DIMENSIONS(WxD): 36 x 30 inches, 44 x 30 inches, 48 x 30 inches, 60 x 30 inches, and 72 x 30 inches. The height adjusts fr

Evolution One Beautiful Wheel Chair

Evolution One Beautiful Wheel Chair is designed for individuals with limited lower extremity strength and coordination as a result of cerebral palsy or a spinal cord injury.  These chairs are made by a Swiss design team, Emosign.  This wheelchair is a stylish piece of furniture that combines a wheel with a chair. The user can customize their chair by picking from a range of wheels (18-to-19 inches), color and chrome rims. 

Executive Ergonomic Task Chair

The Executive Ergonomic Task Chair is an adjustable office chair designed for use by individuals who require position changes throughout the day. This chair is designed to provide lumbar support for individuals who sit at a desk for long periods. Features include a lock tilt swivel mechanism, gas lift height adjustment, seat pitch adjustment, back height and pitch adjustments, and 7-position adjustable height armrests. DIMENSIONS: The overall height is 46.5 to 50 inches. Seat (WxD): 20 x 19.5 in

Extended Easel (Models Ee100, Ee100D, Ee200D, & Ee200S)

Extended easel functions as three different pieces of furniture. Floor easel is designed for child for long sitting activities. Raised book edge holds material at a 20 degree angle and also adjusts to a horizontal plane for play. Adjustable leg set converts floor easel into a portable desk adjustable from 21 inches to 27 inches in height. Capable of converting to horizontal setting. Intermediate size converts easel to a smaller desk 14 inches to 21 inches in height. The seat block converts floor

Extended Tray Easel

Extended easel tray has a 20 by 24 inch surface with a 14 1/2 inch cutout. Designed to interface with the TherAdapt Mini- or Primary Cube Chairs and the Mini-Prone Stander. Top adjusts to 30 degree angle. The large model is 28 inches wide by 23 inches deep with an 18 1/4 by 4 1/2 inch cutout. Three types of legs are available for both sizes: 9 to 15 inches high, 15 to 21 inches high or 26 to 32 inches high.

Extra Care Bariatic Bed (Models 4054Sd & 4054Sdx)

The Extra Care Bariatric Bed, models 4054SD and 4054SDX, is a motorized, reinforced bed designed for use by individuals with obesity and severe physical disabilities or spinal cord injury. This bed features a two-piece frame with powered height adjustment, fowler backrest and leg lift. Model 4054SDX also has powered Trendelenburg and reverse Trendelenburg. It has a battery backup and a standard remote control. OPTIONS: Scale system; over-bed trapeze transfer aid; bariatric mattress; bolsters; s

Extra Care Bariatric Patient Room Recliner (Models 7150 & 7155)

The Extra Care Bariatric Patient Room Recliner, models 7150 and 7155, is a reinforced recliner chair designed for use by individuals with obesity and mobility disabilities or by individuals who require support while sitting. This chair back reclines up to 40 degrees and the leg rest articulates as the back reclines. The manual reclining mechanism is located in the rear of the chair and is intended to be operated by an attendant. The chair also has four locking casters. DIMENSIONS: Model 7150 is

Extra-Strong Bed

CUSTOM ADAPTATIONPURPOSE: To prevent children and adults with cognitive disabilities and poor impulse control from throwing the bed. The bed frame was made of heavy square steel tubing and has six legs. A plywood platform was cut to fit and bolted to the frame. Loktite was put into the threads to make it dificult to unbolt the platform from the frame. The platform edges were smoothed and the platform was sealed with clear varnish. The bed was then bolted to the home's concrete slab floor using

Eye Pillow

The Eye Pillow is a pillow designed to ease eyestrain for individuals who have nervous tension, headache, migraines or insomnia. These flaxseed-filled pillows are shaped to fit snugly around the facial curves and gently press on key acupressure points in the eye area to help eliminate visual stimuli through deep relaxation and repose. The pillow comes with silk casings that have a microwave-safe zipper. The pillows are available unscented or scented with herbs or essential oils. DIMENSIONS (LxW

Ez Boost Power Seats

The EZ Boost Power Seat is a self rising seat that helps individuals who need help getting out of chairs. Self riser gently lowers or raises user and helps relieve stress and strain on joints. No batteries or electricity needed. Foam filling provides seated comfort. Handle makes it easy to move from chair to chair or take when traveling.

Ez Care Coil Mattress (Model Ez-115000)

The EZ Care Coil Mattress, model EZ-115000, is a hospital mattress designed to provide firm innerspring support. The vinyl cover can be cleaned with a mild disinfectant. Perimeter wire allows for full gatch adjustments without breakdown. DIMENSIONS (HxLxW): 6.5 x 80 x 36 inches.

Ez Care Fitted Mattress Cover (Model Ez-115100)

The EZ Care Fitted Mattress Cover, model EZ-115100, is a mattress protector designed for use by individuals with incontinence. This protector is made of waterproof, non-allergenic vinyl and has elasticized edges to keep it in place.

Ez Care Foam Mattress (Model Ez-115020)

The EZ Care Foam Mattress, model EZ-115020, is a foam mattress designed to provide firm support. The vinyl cover is easily cleaned with a mild disinfectant.

Ez Care Height Adjustable Overbed Table (Model Ez-110550)

The EZ Care Height Adjustable Overbed Table, model EZ-110550, is designed to provide eating and work space for individuals who are in bed for extended periods or who use wheelchairs. This height-adjustable table has an open frame base to slide under the bed or for wheelchair accessibility. The table has a laminate top and an H-frame base with four swivel casters. It can be turned for either right- or left-hand use. The height is adjusted using a one-touch release lever, and gentle pressure on th

Ez Care Height Adjustable Pivot And Tilt Overbed Table (Model Ez-110500)

The EZ Care Height Adjustable Pivot and Tilt Overbed Table, model EZ-110500, is designed to provide eating and work space for individuals who are in bed for extended periods or who use wheelchairs. This table has an open frame base to slide under the bed or for wheelchair accessibility. It has a laminate top and a C-frame base with four swivel casters. The table is supported by a height-adjustable column that angles upward toward the user from the right side of the frame. The table top tilts to

Ez Care Home Care Bed

The EZ Care Home Care Bed is a motorized bed designed for use by people with severe physical or mobility disabilities or spinal cord injury. This fully electric bed can be raised and lowered at three independent points, the head, knee and foot, and the entire bed can raised and lowered to facilitate transfer. Trendelenberg and reverse Trendelenberg positions can be attained. By moving all three independent areas, the head/foot gatch can be raised or lowered. FRAME: The frame splits into independ

Ez Care Mattress Cover With Zipper (Model Ez-115200)

The EZ Care Mattress Cover with Zipper, model EZ-115200, is a mattress protector designed for use by individuals with incontinence. This protector is made of waterproof, non-allergenic vinyl and has a zippered closure to keep it in place.

Ez Care Pressure Relief Mattress (Model Ez-115050)

The EZ Care Pressure Relief Mattress, model EZ-115050, is a foam mattress designed for use by individuals at risk for pressure sores or ulcers. This pressure-relieving mattress is made of two layers of foam. The diagonally-cut foam top layer reduces pressure and friction, and the resilient firm foam base provides support and comfort. The mattress has a durable, zippered, waterproof, antimicrobial cover. The mattress and cover are latex-free.

Ez Care Side Rails (Model Ez-110100)

The EZ Care Side Rails, model EZ-110100, are hospital or home care full-length bed side rails designed for use by individuals with spinal cord injury or mobility disabilities. The rails install without tools on most split spring beds. The rails are made of 1-inch diameter chrome-plated steel, and they telescope to adjust to the length of the bed.

Ez Care Side Rails (Model Ez-110110)

The EZ Care Side Rails, model EZ-110110, are heavy-duty half-length hospital or home care bed side rails designed for use by individuals with spinal cord injury or mobility disabilities. The rails install without tools on either the head or foot of a bed. The rails are made of heavy duty chrome-plated steel.

Ez Care Side Rails (Model Ez-110200)

The EZ Care Side Rails, model EZ-110200, are hospital or home care full-length bed side rails designed for use by individuals with spinal cord injury or mobility disabilities. These rails install without tools on most conventional or adjustable beds. The rails are made of chrome-plated steel, and they expand to accommodate a king size bed.

Ez Landing Fall Mat (Models 911585 & N911590)

The EZ Landing Fall Mat is a fall mat designed to protect individuals with balance or mobility disabilities. Intended to provide protection for individuals who are at risk of falling out of bed or while entering or exiting the bed, this one-piece mat features trip-resistant beveled edges; a low profile, stable surface; and nano-silver throughout which protects the mat from stains, odor-causing bacteria, mold, and mildew. DIMENSIONS (HxLxW): 1 x 68 x 30 inches or 1 x 68 x 24 inches.

Ez Stand Mobile Stool (Model 3250)

The EZ Stand Mobile Stool, model 3250, is an adjustable high stool with casters designed to enable people who have difficulty standing for long periods to maintain a near-standing position while having 90 percent of their body weight supported. The stool features a lightweight, high strength alloy tripod-style frame with a padded saddle seat and non-scuffing, non-locking casters. This product has no latex. DIMENSIONS: The seat adjusts vertically from 26 to 34 inches high. CAPACITY: 250 pounds.

Fairview

The Fairview is a seat lift recliner chair designed for use by individuals with mobility disabilities. This motorized chair has a hardwood frame; a welded steel base; heavy-gauge, no-sag steel springs in the seat and back; dacron fibers in the arms, back, and chaise for shape retention; and a cushioned seat for comfort and support. Covered in acrylic, polyester, and Olefin fabric, this chair also features traditional styling with a tufted chair back design, arm covers, and a magazine pocket on t

Faux Sheepskin Bed Sore Cover

The Faux Sheepskin Bed Sore Cover is a decubitus pad designed for use by individuals at risk for pressure sores/ulcers and/or incontinence. The sheepskin cover is constructed to keep air flow between the skin and sheets.

Feather-Lite Bed Pad

The Feather-Lite Bed Pad is a mattress surface filled with a polymer-based fiber that can be used for the treatment of decubitus ulcers. The fiberfill material acts like springs to provide uniform support, provides insulation for warmth, and air circulation for perspiration evaporation. One or both sides are rubberized. This mattress is washable. SIZES: Fits full standard beds. WEIGHT: 11 pounds. COLOR: Various options. WARRANTY: 6-month warranty.

Feeding Tray.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Feeding tray which fits against the child, will not slide away, and holds a plate in place. Instructions for building a table-top feeding tray of plywood (12 by 12 inches) with a rounded cutout on one side to fit against the child, a batten fastened on the underside, without interfering with the cutout, to keep it from sliding away, and 4 wood plate stops with turn buttons to hold the plate in place. Includes list of materials and drawings. SKILLS REQU

Feeter Heaters

Feeter Heaters are wool-lined booties that are designed to be worn by people with mobility disabilities and arthritis. These ankle-high booties are made of a soft fabric and lined with breathable wool to keep feet warm and dry. These booties are machine washable. SIZES: These booties are available in medium (sizes 6 to 7) and large (sizes 8 to 12).

First Class Chair (Models Fc 2000 & Fc 4000)

The First Class Chair is a youth positioning chair designed for use with children with physical and neurological disabilities. Designed to promote good feet-on-the-floor posture, this vinyl-upholstered chair is equipped with a pelvic strap and has a height- and depth-adjustable seat with up to 15 degrees of tilt. Each armrest is independently height-adjustable and they swing to the side for ease in transfer and positioning. OPTIONS: Adduction pads; headrest; and an accessory kit with a trunk har

Firststep Select

The FirstStep Select is an air flotation mattress surface designed to provide pressure relief to individuals with skin breakdown . This product can be used as an overlay or as a mattress replacement system. The FirstStep Select features convenient height and weight presets for patient placement, easy-to-use controls, three-section pressure adjustment, and rapid deflation for cardio- pulmonary resuscitation (CPR). This product is indicated for the prevention of skin breakdown, in the treatment o

Five-Piece Chair.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Chair that can be assembled in several positions, such as vertical or reclining, and with different seat and footrest heights. Describes chair made of plywood, with softwood battens. Drawings illustrate construction of the parts ( sides with armrests, seat, back and footrest) and one way of putting the chair together. Lists materials needed. Includes photograph. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Aids for Your Handicapp

Fixed Height Ada Desk

The Fixed Height ADA Desk is a computer desk designed for use by individuals who use wheelchairs. The scratch-resistant work surface has a a smooth, rounded solid oak front edge and an oak chair rail to prevent hardware from sliding off. A hinged "Flip-Top" door runs the entire length of the work surface for access to cords and cables. A cable channel hides and protects cords and cables. DIMENSIONS (HxWxD): 32 x 44 x 30 inches. COLOR: The standard color combination is an oak work surface and pu

Flaghouse Height Adjustable Personal Worktable

The Personal Worktable is a height-adjustable work table designed for use by children and adults who use wheelchairs. It can be used as an accessible desk or small activity table. The table height is adjusted by turning the admustment knobs on the legs. DIMENSIONS(HxLxW): The height can be adjusted from 23 to 33 inches and the work surface measures 36 x 30 inches. COLORS: Maple finish laminate top with almond powder-coated base.

Flannel/rubber Waterproof Sheeting (Models 8037-36, 8037-54, 8037-72, & 8039)

The Flannel/Rubber Waterproof Sheeting, models 8037-36, 8037-54, 8037-72, 8039, is a waterproof sheet designed to protect a mattress from moisture. This sheeting is cotton flannel bonded to rubber and is autoclavable and completely waterproof. DIMENSIONS: Flat: 36 x 36, 36 x 54, 36 x 72. Roll: 36 inches x 12 yards. COLOR: White.

Fleece Pad

The Fleece Pad is a mattress pad designed for use by individuals at risk for pressure sores. Designed to be placed on top of the bottom sheet, this machine washable polyester pad has the feel of fleece and allows the skin to breathe. DIMENSIONS: 36 x 72 inches.

Fleece-Covered Bed Wedge

The Fleece-covered Bed Wedge is a wedge pillow designed for use by individuals with respiratory disabilities or digestive problems. This fleece-covered pillow provides support for the head, neck, and upper back, and it can also be used to elevate the legs. DIMENSIONS (HxWxD): 10.5 x 24 x 24 inches

Fleecewrap

Fleecewrap is a lightweight blanket designed for use by individuals with lower extremity or neurological disabilities, arthritis, or other conditions creating sensitivity to the weight of blankets. This blanket provides comfort and warmth, without unpleasant weight bearing down on limbs, muscles, and joints. Made of pure Polworth wool, the weave is extremely soft with no harsh fibers to irritate sensitive skin. The honeycomb finish traps warm air in hundreds of tiny pockets or air-cells. The Fl

Flex-A-Bed Hi-Lo Series Adjustable Bed (Series 185)

The Flex-A-Bed Hi-Lo Series Adjustable Bed, series 185, is a motorized bed designed for use by individuals with mobility, respiratory, digestive, or severe physical disabilities or spinal cord injury. This bed enables the user to raise the head and feet independently or simultaneously, and the bed height is adjustable. Features include a choice of a wired or wireless hand-operated pendant control; an innerspring mattress in a choice of soft, medium, or firm; a high-density foam foundation; and r

Flex-A-Bed Premier Adjustable Bed (Model 790)

The Flex-A-Bed Premier Adjustable Bed, model 790, is a motorized bed designed for use by individuals with mobility, respiratory, digestive, or severe physical disabilities or spinal cord injury. This bed enables the user to raise the head and feet independently or simultaneously. Features include a choice of a wired or wireless hand-operated pendant control; wood trim panels over metal frame and the mattress retainer at the foot of the bed; an innerspring mattress in a choice of soft, medium, or

Flex-A-Bed Value-Flex Adjustable Bed (Model 158)

The Flex-A-Bed Value-Flex Adjustable Bed, model 158, is a motorized bed designed for use by individuals with mobility, respiratory, digestive, or severe physical disabilities or spinal cord injury. This bed enables the user to raise the head and feet independently or simultaneously. Features include a hand-operated pendant control; mattress retainer at the foot of the bed; an innerspring mattress in a choice of soft, medium, or firm; locking casters; Bioguard treatment of mattress fabrics to inh

Flexigrip (Model 6090)

FlexiGrip, model 6090, is a bed transfer aid designed for use by individuals with mobility disabilities. This eight-handle transfer aid can be used when getting out of bed or when making transfers. It is made from soft nylon that resists soiling, and can be fitted at the foot end of the bed using a loop. DIMENSIONS (LxW): 175 x 9 centimeters.

Flextable (Model A)

The FlexTable, model A, is an adjustable height tilt top table designed for use by individuals with lower extremity or mobility disabilities and others with special seating needs. This table, which is designed to accommodate four people, has four height-adjustable work stations mounted on the ends and each side of a rectangular base. The side stations also tilt. The end stations are removable. The base rests on 4 4-inch lockable casters so the table can be positioned as needed. DIMENSIONS (LxW)

Flextable (Model B)

The FlexTable, model B, is an adjustable height tilt top table designed for use by individuals with lower extremity or mobility disabilities and others with special seating needs. This table, which is designed to accommodate six people, has six height-adjustable work stations mounted on a rectangular base, one on each end and two on each side. The side stations also tilt. The end stations are removable. The base rests on 4 4-inch lockable casters so the table can be positioned as needed. DIMENS

Flextable (Model C)

The FlexTable, model C, is an adjustable height tilt top table designed for use by individuals with lower extremity or mobility disabilities and others with special seating needs. This table, which is designed to accommodate eight people, has eight height-adjustable work stations mounted on a rectangular base, one on each end and three on each side. The side stations also tilt. The end stations are removable. The base rests on 4 4-inch lockable casters so the table can be positioned as needed.

Flip-Up Table

CUSTOM ADAPTATION PURPOSE: To provide a mobile table that can be moved close enough to a person seated in an armchair to be used for eating or working. Elongate the crossbar of the base of a hospital bedside table to increase the width of the base to be slightly wider than an armchair. If necessary, lengthen the table's vertical support to adjust the table's height. MATERIALS: One hospital bedside table and additional tubing. TITLE: Doing It Yourself. AUTHOR: Wechsler, K. JOURNAL: Quest. WEB SI

Floor Cushion (Model 6020)

The Floor Cushion, model 6020, is a fall mat designed to protect individuals who are prone to falling out of bed or while entering or exiting the bed and/or who have osteoporosis. This thick, high-density foam pad is designed to be placed beside the bed and the non-slip bottom helps prevent slipping during use. This mat is sized to slide under the bed between the wheels when not in use. Covered in bacteriostatic vinyl, the pad wipes clean with a damp cloth and spray cleanser. DIMENSIONS (LxWxH)

Floor Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Floor tray table designed for use with floor seat provides writing area with extra support. Tray table top is constructed of 12 inch by 16 inch plywood board. Side panels measure 12 inches by 12 inches. Softwood battens can be glued inside side panels about 1 1/2 inches from top of tray. Front edge of tray can be cut out to fit child. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Aids for Your Handicapped Child REF: London, Englan

Floor Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Small floor table so a child can sit leaning against the wall or other furniture and play with other children who are playing on the floor. Table made of 12 by 24 inch plywood, with sides which allow the table to stand 10 inches off the ground and provide 2 inch edges, with a 2 inch edge along the front. A section can be cut out to allow the table to fit partly around the child's body. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make

Fluidair Elite

The FluidAir Elite is an air-fluidized motorized bed designed for use by individuals with pressure ulcers, grafts and flaps, burns, and limited mobility. The FluidAir Elite healing system offers built- in scales for accurate weight monitoring and adjustable fluidization. The user can be placed in the sitting position. Variable fluidization helps facilitate user comfort and reduce the risk of dehydration. The pause feature enables the caregiver to stop fluidization to provide nursing care. The du

Fluidair Hc

The FluidAir HC is an air-fluidized motorized bed designed for use by individuals with pressure ulcers, grafts and flaps, burns, and limited mobility. The low air-loss head elevation feature allows the user to be raised to a 10 degree or 40 degree sitting position. The lightweight modular design allows for placement in a variety of home care settings. A GORE-TEX fabric cover sheet helps to prevent friction and shearing of user's skin and creates a microclimate for healing. Variable fluidization

Fluidair Ii

The FluidAir II is an air-fluidized motorized bed designed for use by individuals with pressure ulcers, grafts and flaps, burns, and limited mobility. The FluidAir II healing system offers adjustable fluidization. Variable fluidization helps facilitate user comfort and reduce the risk of dehydration. The pause feature enables the caregiver to easily stop fluidization to provide nursing care. The dual-mode cooling system helps maintain target temperature. Two built-in side steps provide access. T

Foam Slant

The Foam Slant is a foam positioning wedge designed to provide elevation of upper body or legs. The polyurethane foam wedge includes a polycotton cover.OPTIONS: Replacement covers. DIMENSIONS: 24 x 26 inches x 4 sloping to .5 inches; 24 x 26 x 7.5 sloping to .5 inches; 24 x 26 x 10 sloping to .5 inches; 24 x 26 x 12 sloping to .5 inches. COLOR: The cover is available in a choice of blue or white.

Folding Bed Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Bed table which can be folded flat for storage. Instructions for building a bed table with hinged legs. The table is made of plywood. Includes diagrams, drawings and photographs. SKILLS REQUIRED: Woodworking. AUTHOR: Grainger, S E TITLE: Making Aids for Disabled Living REF: North Pomfret, Vermont: Batsford: p 80-86 NARIC CALL NUMBER: R1126 PAGES (including cover): 8 1981.

Folding Bed Wedge

The Folding Bed Wedge is a positioning wedge designed for use by individuals with respiratory or circulatory disabilities. Made of lightweight, breathable polyurethane foam, this wedge can be used to support the upper body or the knees and lower legs. A washable polyester velour cover is included. DIMENSIONS (LxW): 24 x 24 inches unfolded, 24 x 12 inches folded; 9.5 inches high at the top when unfolded, 10 inches high folded. WEIGHT: 3.5 pounds.

Folding Wheelchair Table

The Folding Wheelchair Table is a height-adjustable tilt top work table designed for use by children and adults who use wheelchairs. Features include a chrome-plated steel frame and side braces to ensure stability and a laminated, scratch-resistant woodgrain surface. The table can also accommodate tilt tables and it folds for storage and transport. DIMENSIONS: The height adjusts from 29 to 44 inches. The top is 30 x 40 inches, and the top tilts up to a 45 degree angle.

Foot Free Pillow

The Foot Free Pillow is a wedge pillow and blanket support designed for use by individuals who cannot bear the weight of blankets on the feet or who have sensitive skin. This pillow is designed to create a free space at the end of the bed between the covers and the mattress to allow free foot movement. The pillow can also be used as a back or arm rest. The inner lining and outer cover are made of polyester and the pillow is made of durable polyurethane foam. It is washable by hand. DIMENSIONS (

Foot Rocker Foot Rest (Model 2122Bl)

The Foot Rocker Foot Rest, model 2122BL, is a footstool designed for use by individuals with lower extremity or circulatory disabilities. The footstool's rocking action encourages leg movement to promote circulation and muscle activity. It has a rock-and-stop design that provides subtle position stops. It is made of vinyl-covered MDF with anti-skid feet. DIMENSIONS (HxDxW): 3.5 x 11.5 x 17.5 inches. WEIGHT: 4 pounds. COLOR: Black.

Footstool

DO IT YOURSELF ENTRY --- PURPOSE: To enable individuals with lower extremity disabilities or using a raised chair to have foot support. Included in a chapter entitled "Living Room & Leisure Activities," this article provides detailed instructions with illustrations for building a simple footstool with a padded top. Also included are instructions for changing the dimensions and proportions to suit the needs of the user. MATERIALS: 36-inch long piece of 1 x 10 inch lumber, an 11.5-inch long

Footstool (Model Nk 705)

The Footstool, model NK 705, is designed with wide base legs and a large top surface for stability. The legs are made of chromed metal tubing with rubber tips and the top is covered with a non-slip rubber mat. DIMENSIONS: 14 x 10 x 8 inches high.

Footstool With Handrail (Model 16003)

Footstool with chrome plated steel frame. 10 by 14 inch platform with rubber mat. Offset legs with base 14 by 18 inches. 9 inches high, with 29 inch U shaped handrail attached.

Four Place Child Cut Out Table Kidney Shape (Model 354)

The Four Place Child Cut Out Table Kidney Shape, model 354, is a semi circular, kidney shaped table. The table features wood grain laminate, scratch resistant top and five legs for stability. The table accomodates seating for four children with amble space for each child to work. Also makes an excellent feeding station. DIMENSIONS (HxWxL): 24 x 29 x 96 inches; cut outs are 6 x 9 inch (1 each), 7 x 10 inches (2 each), and 8 x 12 inches (1 each).

Fox Cabrail System

The Fox CabRail System is composed of adjustable cabinet units for kitchens, offices, bedrooms, and other applications requiring adaptable and accessible cabinetry. Available units include office desks and computer stands, file cabinets, oven units, stovetop cooking units, night stands and vanities, countertops, stackable drawer units, closet systems, and bathroom sink and vanity units. The units are designed to make efficient use of space while still making the cabinet contents accessible. For

Freedom Bed

Freedom Bed is a bed with automatic turning designed for use by individuals with spinal cord injury, severe physical disabilities, or neurological disabilities. This therapeutic bed system turns the user to different stable sleeping positions, either manually or automatically. The bed is designed to mimic the body's natural nocturnal motion by mechanical repositioning in order to re-establish blood flow to compressed tissue and prevent bedsores. The horizontal surface of the bed (the paten) that

Frette Crib

The Frette Crib is a circle bed designed for use with infants with cognitive or severe physical disabilities. Designed to promote infant safety and provide an unrestricted view for the developing child, this metal crib offers easier child access to parents and eliminates the dangers of sharp corners found on standard cribs. The crib has a hand-forged iron dome and drop-side access and includes a high-density foam mattress. OPTIONS: Bedding and linens watterproof pad, and mattress pad. DIMENSIONS

Friendly Bed System (Model Eb)

The Friendly Bed System, model EB, is a bed mobility, transfer and positioning aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. The system has a steel framework that fits king, queen or double conventional beds. The frame has two end pieces that are placed beyond a bed’s headboard and footboard (or end if the bed does not have a footboa

Friendly Bed System (Model Fb)

The Friendly Bed System, model FB, is a bed mobility, transfer and positioning aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. The system has a steel framework that fits queen, double, and twin conventional beds. The frame has two end pieces that are placed beyond a bed’s headboard and footboard (or end if the bed does not have a footb

Friendly Bed System (Model Tb)

The Friendly Bed System, model TB, is a bed mobility, transfer and positioning aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. The system has a steel framework that fits twin conventional beds. The frame has two end pieces that are placed beyond a bed’s headboard and footboard (or end if the bed does not have a footboard). The ends ar

Friendly Bed System (Model Tb/hw)

The Friendly Bed System, model TB/HW, is a bed mobility, transfer and positioning aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. The system has a steel framework that fits twin beds with a Hollywood style frame. The system’s frame has two end pieces that are placed beyond the head and foot of the bed. The ends are connected by two pa

Full Electric Bariatric Bed (Models 15300, 15302, & 15303)

The Full Electric Bariatric Bed is a motorized bed designed for use by individuals with severe physical disabilities or spinal cord injury. The bed is height adjustable, and has a heavy-duty frame. OPTIONS: Each size bed is available in a package with a bariatric foam mattress and one or two pairs of "T"-style side safety rails. DIMENSIONS (HxLxW): 18.25 to 26.25 x 88 x 42 inches (model 15300), 48 inches (model 15302), or 54 inches (model 15303). CAPACITY: 600 pounds (model 15300), 750 pounds (m

Full Electric Bed (Model 5410)

The Full Electric Bed is a motorized bed designed to offer the user six adjusting bed positions. Operated by a push button control, this bed is constructed with a single shaft, hi/low drive system. It also an emergengy hand crank. POWER: Hi/Low Motor - 60 rpm, camset: 48 revolutions (+)(-)2. DIMENSIONS: 88 x 36 inches (l x w). Height - 15.25 to 23.25 inches.

Full Side Rail Cover (Model 5702)

The Full Side Rail Cover, model 5702, is a side rail pad designed to prevent injury from bed side rails. These machine-washable covers are lined with synthetic fur and attach over the top of the side rail and under the mattress. The bed rails can be raised or lowered without removing the covers and reinforced holes permit the attachment of restraints.

Furniture Risers

Furniture Risers are leg extenders designed for use by individuals with arthritis, back pain, or mobility or lower extremity disabilities. These leg extenders are designed to make sitting or rising from a couch or bed easier for the user. They are made of plastic with reinforced ribbed construction and include protective non-skid pads to protect the furniture and floor. DIMENSIONS: Raise furniture 3 or 4 inches when used as individual sets or 5 inches when stacked. The width of the 4-inch Risers

Gap Protectors (Model 5706)

Gap Protectors, model 5706, are side rail pads designed to provide protection from injury from bed side rails. These pads fill the gap between double side rails, while still allowing access to built-in patient controls on hospital-style beds. Made of quarter-inch plywood and covered in thick, wipe-clean vinyl, these pads attach to the rails with quick-release buckles.

Gaymar Air Flo Alternating Pressure Relief System Pump

Pad is on 8 gauge vinyl containing channels of air filled pillows that alternately inflate and deflate in two minute cycles. Pad is 33 inches wide by 74 inches long inflated; pump weight 6.5 pounds. Input voltage range 105 to 125; 60 hz frequency.

Gc Recliners

Reclining geriatric chair. Tubular steel frame, chrome plated. Gray rubber 5 inch swivel casters with nylon hubs. Five position reclining back (maximum 70 degrees from the upright position) with easy access lock/release mechanism on the rear of the push bar. Adjustable wheelchair tray with raised rim. Height adjustable, padded, flip-back footrest. Options: fixed or adjustable height arms, elevating legrests, swingaway headrest.

Generation Iv Adjustable Work Tables

Generation IV Adjustable Work Tables are height adjustable work tables designed to provide a completely accessible work station for individuals with a physical disability. These work tables are ideal in that they offer individuals a maximum design of flexibility and adjustability which includes working in a sitting or standing position. They are available as rectilinear or corner - bilevel or single surface tables. Bilevel tables allow you to adjust the height of the keyboard and the VDT height

Gentle Lift Recliner (Models Tmr48, Tmr49, Tmr348, Tmr329, & Economy)

The Gentle Lift Recliner line includes 2- and 3-position, fully reclining seat lift chairs designed to assist individuals who have difficulty sitting down in or getting up from arm chairs. Features include a hardwood (oak) frame; fire retardant materials; quick disconnect electrical components; arm, headrest, and frame covers; a double plate, wide base with steel base frame for stability; and a large side pocket. The entire chair lifts with the user seated to raise the user to a standing positio

Geo-Matt Pillow

The Geo-Matt Pillow is a contoured pillow designed for use by individuals at risk pressure ulcers on the head, neck, and ears. Made of fire retardant rectangular foam cells, the design increases air circulation and reduces heat and moisture build-up. The antimicrobial Soft Skin cover (included) is vapor permeable, keeping temperature and humidity low while protecting pillow from moisture.DIMENSIONS: 23 x 15.5 x 4.5 inches.

Geo-Matt Therapeutic Overlay

The Geo-Matt Therapeutic Overlay is a foam mattress surface designed for use by individuals at risk for pressure ulcers. Cut from foam designed to provide the correct support characteristics for an overlay, these surfaces feature the Geo-Matt design with more than 800 individually responsive foam cells, allowing them to customize support to the body's natural curvature, while minimizing pressure, sheer, and heat build-up. They are zoned to meet the differing support needs of the head, torso, and

Geo-Mattress Hc

The Geo-Mattress HC is a foam mattress designed for use specifically in the home by individuals at risk for pressure ulcers. This mattress features the Geo-Matt surface with more than 800 individually responsive cells in distinct head, torso, and foot zones. The HC is cut from a single layer of combustion-modified foam. This mattress is available with a vapor-permeable nylon and vinyl cover or with a a vapor barrier fabric cover that is bacteriostatically treated and flame retardant.. DIMENSIONS

Geo-Mattress Max

The Geo-Mattress Max is a foam mattress designed for use by individuals at risk for pressure ulcers. This mattress features the Geo-Matt surface with more than 800 individually responsive cells in distinct head, torso, and foot zones and a subtly tapered Heel Slope to redistribute pressure from the heels to the calves and lower legs. The Max also offers a multi-tier design with a perforated center layer to reduce axial pressure and an extra-soft foot section. This mattress includes a vapor barr

Geo-Mattress Plus

The Geo-Mattress Plus is a foam mattress designed for use by individuals at risk for pressure ulcers. This mattress features the Geo-Matt surface with more than 800 individually responsive cells in distinct head, torso, and foot zones and a subtly tapered Heel Slope to redistribute pressure from the heels to the calves and lower legs. The Plus also offers a dual-layer progressive resistance design. This mattress includes a vapor barrier fabric cover that is bacteriostatically treated and flame r

Geo-Mattress Pro

The Geo-Mattress Pro is a foam mattress designed for use by individuals at risk for pressure ulcers. This mattress features the Geo-Matt surface with more than 800 individually responsive cells in distinct head, torso, and foot zones and a subtly tapered Heel Slope to redistribute pressure from the heels to the calves and lower legs. The Plus also offers single-layer zoned construction. This mattress includes a vapor barrier fabric cover that is bacteriostatically treated and flame retardant. DI

Geocomfort Mattress Topper

The GeoComfort Mattress Topper is a foam mattress surface designed for use by individuals at risk for pressure ulcers. These surfaces feature zones to meet the differing support needs of the head, torso, and legs. SIZES: Twin, full, queen, and dual king.

Geri-Chair

The Geri-Chair is a geriatric chair designed for use by individuals with mobility disabilities. This PVC resin chair is equipped with a reclining back and elevating legrests to provide 25 positions of adjustment. A web suspension system and a one-piece fluid-resistant cushion provide maximum comfort. The cushion is fully washable and will not retain odors. Locking casters provide mobility.

Geriatric Seating (9510/9810 Series)

The 9510/9810 Geriatric Seating models both feature upholstered, padded seating. Measurements for: Models 9510/9810 are overall 24.25 w x 44 h x 33.25 l, seat width 18, seat from floor 20.5 h, back from seat 25 h inches, except Model 9819 seat from floor height is 22.5 inches. The Geriatric Seating models standard features include a locking, six position service tray with a telescopic, 20 degree tilt; the tray is laminated to resist stains, full-width footboard covered with a non-slip vinyl mat.

Glide 'n Go Transfer Seat Bifold

The Glide æn Go Transfer Seat Bifold is a powered transfer seat designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This flip-down power lift seat raises the user from a wheelchair to vehicle seat level to enable the user to enter and exit an extended cab pickup truck. The system is operated by unfolding the safety arm and pressing the ôupö button. No structural modifications or holes are required for installation. The foldaway seat design allows

Glide 'n Go Transfer Seat Single-Fold

The Glide æn Go Transfer Seat Single-Fold is a powered transfer seat designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This power lift seat works with full- or mid-size SUVs, minivans, or short cab pickup trucks. The system is operated by unfolding the safety arm and pressing the ôupö button. No structural modifications or holes are required for installation. The lift works on either the driver or passenger side in the first or second row of sea

Golden Hip Chair

Armchair with high seat provides alternative seating for persons experiencing hip, back or leg discomfort. Dimensions: Height 47 inches, width 24 inches. Adjustable seat depth 15 to 17 inches. Seat height 26 inches. Adjustable footrest height 5 to 6 1/2 inches. Armrest height from floor 32 inches. Assembly required. Available in 24 colors.

Golden Power Lift Chairs

Fully powered lift chair. Paddle or toggle switch. Emerald may be accessorized with heat and massage features. Sapphire can fully recline. Also available is a drop-arm rehabilitation model in which the seat stays level during lift to facilitate transfer to a wheelchair. All chairs come in 3 standard sizes. Custom sizes available. Lifetime warranty on lift mechanism, and a one year warranty on the chair. Fabric or vinyl.

H Base Overbed Table (Models 11600 & 11610)

The H Base Overbed Table, models 11600 and 11610, is an overbed table designed for use by individuals with mobility or severe physical disabilities. The table has a four point H-shaped base with four dual wheel nylon casters, two of which lock. Plastic glides are also included to replace the casters. The table also features spring-loaded height adjustment. DIMENSIONS(LxW): 26.38 x 15.25 inches (base); 30 x 15 inches (tabletop). The height of the table adjusts from 26.75 to 43.25 inches. CAPACITY

Half Rails (Model 6630)

Chrome plated bed rail with two steel channel cross braces. Clamped to spring of hospital bed. Slide bushings accept two vertical tubes of each rail to guide it up and down. Single plunger on bracket releases and locks rail. Can be used with bed in all positions. Length 30 inches, fits bed widths 34 to 36 1/2 inches.

Hang N Roll Bolsters (Models 1020,1022,1024,1026)

A Hang-n-Roll Bolster, models 1020, 1022, 1024, 1026, is a bolster that can be used as a vertical bolster, pony bolster, or a floor bolster for individuals with a physical disability. By hanging it vertically or horizontally from the tightly secured straps on either end it can be used for climbing and hanging for gravitationally insecure clients. It can be used to challange postural adjustments and balance reactions as well as facilitate motor skills. By putting the bolster on the floor it can a

Heat And Massage Lift Chair (Model 70557)

The Heat and Massage Lift Chair, model 70557, is a recliner chair designed to assist individuals with mobility disabilities in rising to a standing position. This electric chair has three reclining positions, a lift mechanism to bring the user smoothly to a standing position, heat and gentle vibrating massage, hand-held controls, and a choice of velvet fabric or vinyl upholstery. It has a single motor with a built in emergency battery back-up, allowing the chair to return to sitting position in

Heathfield Chair With Adjustable Arms (Models 6901, 6902, 6903, 6904, 6905, & 6906)

The Heathfield Chair with Adjustable Arms, models 6901, 6902, 6903, 6904, 6905, and 6906, is an adjustable child's posture chair designed for home or classroom use by children with physical or neurological disabilities. This chair is designed for good postural sitting with minimum support. It is a low chair with a choice of feet on the floor, dolly, footrest, or footplate configuration. The legs and arms can be adjusted independently. The seat height and depth are also adjustable. The chair is a

Heathfield Chair With Fixed Carver Arms (Models 6911, 6912, 6913, 6914, 6915, & 6916)

The Heathfield Chair with Fixed Carver Arms, models 6911, 6912, 6913, 6914, 6915, and 6916, is a child's posture chair designed for home or classroom use by children with neurological or physical disabilities. This low chair has a contoured seat and buckle strap for good postural sitting with minimum support. It is available in feet on the floor, dolly, footrest, or footplate configuraton. OPTIONS: Flat seat; Velcro strap; tray; footrest; footplate; dolly (mobile base) with 75-millimeter locking

Heavy Duty Mobile Adjustable Height Wheelchair Table (Model 375)

This adjustable height work table can accommodate both children and adults. Its features include a chrome plated steel frame, ball bearings, and 3-inch locking rubber swivel casters. It is equipped with side braces to assure stability. The table top is a wood grain laminated, scratch resistant surface. It can be used with wheelchairs and tilt tables. DIMENSIONS: Height adjusts from 26 to 34 inches, the top is 30 x 36 inches with a 5 1/2 x 20 inch cut out, the top tilts to a 45 degree maximum.

Height Adjustable Table

The Height Adjustable Table is a height adjustable work table designed for use by individuals with low vision for comfortable viewing of a video magnfier/CCTV. This wide table offers space for moving a CCTV viewing tray while holding papers and other materials. DIMENSIONS (LxWxH): 24 x 48 x 22.5 to 32 inches.

Helping Handle Bed Grab Bar

The Helping Handle Bed Grab Bar is a bed rail designed to assist individuals with physical disabilities in pulling themselves to a sitting position while in bed. The grab bar-style handle is made of heavy-duty Formica-style laminate and vinyl coated steel. It can be installs on most conventional beds, and can be taken apart for traveling. It fits mattresses less than 12 inches deep, and will elevate 4.5 inches above the mattress.

Herman Miller Scooter

The Herman Miller Scooter, model FD830, is a height adjustable tilt desk designed for use as a keyboard holder or desk by people with physical disabilities. This desk is designed to fit over the lap of the user and adjust to the optimal height and angle for working comfort. The sculpted cherry top features a divided lip to keep books and papers from sliding and a slight center indentation to allow the desk to fit over the lap. The top can be used flat or be angled using the lever beneath it. Th

Hexagonal Picnic Table - Wheelchair Accessible (Model Ohtha)

The Hexagonal Picnic Table - Wheelchair Accessible, model OHTHA, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This six-sided table has space on one side for a wheelchair. The frame, seats, and table top are made from 100 percent recycled plastic, with stainless steel hardware. The table also includes an umbrella hole. DIMENSIONS (HxW): The table top is 30.5 x 40 inches. The seats are 17.5 x 9.5 inches. The umbrella hole is 2 inche

Hill-Rom Np50 Prevention Surface

The Hill-Rom NP50 Prevention Surface is a foam mattress surface and decubitis pad designed for use individuals in acute care or with severe physical disabilities or spinal cord injury. This lightweight, durable surface is constructed of high-density medical-grade foam with fluid proof nylon ticking and a vinyl base. The surface redistributes pressure to help prevent decubitis ulcers. It articulates with a frame and is reversible from head to foot. OPTIONS: Bolster/raised firm perimeter. CAPACITY

Hip Chair (Model 20100)

Chair with high seat. Height 40 inches. Width 24 inches. Depth 24 inches. Width between arms 19 inches. Seat height from floor 25 inches. Seat 20 1/2 inches wide by 18 inches deep. Back 20 1/2 inches by 9 inches high. Height of footrest from floor 9 inches. Spread of legs 22 inches wide by 27 1/4 inches deep.

Home Bed Rails (Models 6626 & 6628)

Adjustable bed rails for standard twin, single, or double beds. Tubular crossbraces in 8 preselected widths, 36 to 69 inches. Crossbrace fits between bed spring and mattress. Welded, chrome-plated 1 inch steel rails automatically lock in raised position. Rail length 46 to 74 inches. Rail height 20 inches. Telescoping model available with spring- loaded cross brace. .

Home Care Bariatic Bed (Models 3639 & 3648)

The Home Care Bariatric Bed, models 3638 and 3648, is a reinforced, motorized bed designed for use by individuals with obesity and severe physical disabilities or spinal cord injury. This bed features a split-frame construction with powered height adjustment, fowler backrest and leg lift. Drop-down removable side rails, a footboard, a headboard and a remote control are standard. OPTIONS: Bariatric mattress; emergency battery backup. DIMENSIONS: The length is 84 inches. The width can be adjusted

Home Style Bed Rails

The Home Style Bed Rails are side rails designed for use on the the beds of individuals with severe physical or cognitive disabilities. The rails are designed for use on standard home beds and can be raised and lowered with a push button. DIMENSIONS (HxL): 19.5 x 58.5 inches. The height above the boxsprings adjusts to 15.5 and 19.5 inches. The width adjusts from 26 to 72 inches. WEIGHT: 15 pounds.

Homecare Advantage Bed

The Homecare Advantage Bed is a motorized bed designed for use by obese individuals and people with severe physical or mobility disabilities or spinal cord injury. This fully electric bed has eight functions, including raising and lowering the head section; raising and lowering the entire bed; raising and lowering the foot section; and raising or lowering the sections into a Comfort Chair position. FRAME: The heavy-duty steel frame splits in half for transport and includes oak head- and footboar

Horizon Recliner (Models Hr300 & Hr400)

Reclining geriatric chair. The top of the back folds to the rear to facilitate attendant transfers, or the extension can be removed to convert the chair to a standard height back. Padded seat and back with vinyl upholstery. Adjustable headrest and removeable head wings. Adjustable seat depth: 14 to 19 inches. Overall width with casters 25 inches. Adjustable calf pad can be reversed to use as a knee pad. Adjustable height, flip back armsrests. Seat width 18 inches. Seat height 21 inches. Recline

Horseshoe Therapy Table

The Horseshoe Table is a wheelchair-accessible manual height adjustable therapy table designed for clinic use. The Horseshoe-shaped table accommodates up to four users in wheelchairs and is equipped with seven height-adjustable metal legs and a plastic-laminated top with a cutout. DIMENSIONS: The cutout is 30 x 36 inches and the height adjusts from 26 to 34 inches.

Hospital Bed Sheets (Model C3051, C3053, C3052, & C3050)

The Hospital Bed Sheets are designed for use by individuals who use hospital-style beds in the home. Models C3051, the contoured fitted sheet, and C3053, the top sheet, are cotton/poly blend, and model C3052 is a contoured fitted knit sheet. Model C3050 is a cotton/poly blend pillow case. The knit sheet allows for air circulation and stretches to accommodate the use of a convoluted bed pad. DIMENSION: Model C3051 is 36 x 80 x 6 inches, model 3052 is 61 x 111 x 6 inches, model C3053 is 66 x 104

Hospital Bedding Sets (Model C3054, C3055, & C3056)

The Hospital Bedding Sets are sheet sets designed for use by individuals who use hospital-style beds in the home. All models are packaged in a zippered blanket bag. Model C3054 is a Pillow Protector Bed Set and includes one flat and one fitted cotton/poly hospital bed sheet and one vinyl pillow protector. Model 3055 is a Standard Hospital Bed Set and includes one flat and one fitted cotton/poly hospital bed sheet and one pillow case. Model 3056 is a Deluxe Hospital Bed Set and includes one flat

Hospital Nursing Fleece With Elasticised Skirt

The Hospital Nursing Fleece with Elasticised Skirt is a hospital bed mattress cover designed for use by individuals at risk for pressure sores/ulcers. The pad is held in place with the attached fitted elasticized skirt. The mattress pad is hypoallergenic, non-flammable, anti-bacterial and anti-fungal for dust mite prevention. Hospital fleece provides natural insulation, keeping the individual warm in winter and cool in summer. DIMENSIONS(LxW): 80 x 35 inches.

Howdaseat

The Howdaseat is a posture chair or web seat designed to provide correct support for the back for persons with back and lower extremity disabilities. The multi-purpose, roll-up seat is made of sanded basswood slats covered with stain and water resistant canvas. Cotton webbing straps are attached to the back and seat of the chair with a stapling and wrapping method of closure for extra strength and durability. Designed to firmly support the back, the seat wraps itself around the back and bottom w

Hugg L O Pillow

The Hugg-L-O pillow is a large, V-shaped posture support and/or positioning pillow with long sides for support of shoulders. It contains odorless and nonallergenic polyester filling, and it is washable. Covers are available for $5.98 each.

Hugg-A-Pillow

The Hugg-A-Pillow is a contoured pillow designed for use by individuals with allergies or spinal disabilities. This pillow cradles the back, neck, shoulders, and upper chest for support during side, back, or stomach sleeping. The removable, machine-washable polyester / cotton cover is an allergen barrier to dust mitess, lint, and dust. COLOR: White.

Human Beans

Human Beans are body positioners designed for use by children, teens, and adults with physical or neurological disabilities. These large, cylindrical pillows aid in positioning for side lying, prone or supine, or sitting. Available in a Sleeping Bean (adult), Teen Bean, or Kidney Bean (infant or children), all models are hypo-allergenic, filled with polyester, and covered in Staph-Check antibacterial waterproof vinyl. OPTIONS: Cotton pillow case/cover. DIMENSIONS: The Sleeping Bean is 5.5 feet l

Imperium 200H Environmental Control System

The Imperium 200H Environmental Control System is an environmental control unit designed to provide both visual and voice feedback for individuals with disabilities. Engineered for dual capability at either home or a care facility, this unit is designed to control up to 256 lights and appliances, including televisions, video cassette recorders, compact disc players, electronic bed controls, nurse-call systems, and the optional tape recorder. Extra relays for such items as a powered door opener a

Improving The Posture Of A Seated Worker.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Modification to an office chair for a person with poor trunk control who finds it difficult to maintain a comfortable posture. Describes an office chair with arms constructed by fastening the chair to a plywood base which extends in front of the chair, attaching a wedge shaped foot rest to the base (so the toes point slightly upwards), and using a seat cushion to raise the seat height. Also describes a T shaped wood foot rest that can be used by someon

Incliner Sleep Wedge

The Incliner Wedge is a positioning wedge designed for use by individuals with respiratory disabilities or acid reflux. This wedge elevates the head and shoulders and is crafted of two layers of plush foam. This folding wedge can be used under or on top of a fitted sheet and has a removable, machine-washable velour cover. DIMENSIONS (LxWxH): 24 x 24 x 7 inches. WEIGHT: 3.5 pounds. WARRANTY: 90-day satisfaction guarantee.

Individual Cut Out Table (Model 300)

The adjustable offset legs of this cut out table allows patient to sit almost in the center of the table. The cut out table can be adjusted for both sitting and standing patients and can be used with standing stabilizers. An attached door which swings out or down can lock the patient safely in place. The table is made of wood grain laminate and has scratch resistant top. DIMENSIONS: Height adjusts 21 to 33 inches, top size is 24 x 30 inches with cut out 7 x 10 inches. Adult, child and pediatric

Individual Tilt Work Table (Model Pc 5358-02)

The Individual Tilt Work Table, model 535802, is a height adjustable, accessible tilt-top work table designed for use by people who use wheelchairs. The manual crank adjusts the height of the telescoping legs and the top tilts to any angle between 0 and 50 degrees to accommodate tasks and individuals. The unit includes the table and a tray/shelf extension with a cut out. DIMENSIONS: The tabletop is 35 x 24 inches and the tray attachment is 11 inches. The height adjusts from 22 to 30.5 inches.

Infinity Series (Models 6030, 4830, & 6024)

The Infinity Series, models 6030, 4830, and 6024 are computer work centers and height adjustable work tables designed for use by individuals who use wheelchairs. The motorized height adjustment is activated with a push button and also provides access for individuals who stand or use standing aids while working. The standard table has a laminate top, anodized aluminum pedestal, and steel feet. OPTIONS: Solid wood veneers, PVC vinyl edge treatments, casters, plastic glides/levelers, under desk com

Inflatable Neck Cushion (Model 555-7910-0000)

The Inflatable Neck Cushion, model 555-7910-0000, is a cervical pillow designed for use by individuals who need head and neck support. This neck cushion is ergonomically designed to support the head and neck during napping or relaxation. It inflates to the desired comfort level and deflates for compact storage in a pocket, purse or briefcase. It is made of brushed velour-like vinyl and comes with a storage case. COLOR: Gray.

Inflatable Neck Cushion (Model H76479)

The Inflatable Neck Cushion, model H76479, is a cervical pillow designed to give support to the neck and head. The crescent shaped vinyl cushion may be inflated by mouth or by pump to the desired firmness; the filler tube is flush recessing. The pillow comes with a zipper-closed, washable cloth cover. DIMENSIONS: 17 x 8 x 5 inches.

Invarail (Model 6625)

Chrome plated telescoping side rails for hospital bed with flat channel cross braces. Adjustable width for universal attachment to any hospital bed spring 34 to 36 1/2 inches. Rails telescope from 74 to 47 inches in length. Easy to install.

Jamesair Support Surfaces

The JamesAir Support Surfaces are alternating air pressure mattress surface designed to prevent and treat pressure sores/ulcers. The units are available with low air loss and/or alternating pressure. Also available is a turning mattress. These surfaces are available in standard and bariatric models. POWER: 120-volt alternating current (AC), 60 hertz (Hz), 22/230 volt AC, 50 Hz. OPTIONS: Fast inflate/deflate pump, carrying case. SIZES: Small, medium, large, extra-large, or extra-extra large. Cust

Jobri Mobile Desk Caddy (Model F7300-Xx)

The Jobri Mobile Desk Caddy, model F7300-xx, is a height-adjustable tilt top table that can be used with a recliner or as a freestanding unit. This mobile desk caddy has multiple combinations of height and tilt adjustments, and can be used to hold a laptop or book or for writing. Locking casters help keep it in place and a full lip on the table top keeps items from sliding off. It holds up to 25 pounds. DIMENSIONS: The tabletop adjusts from 30 to 39.5 inches high with a table surface of 16 x 31

Kangaroo Chair And Table

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create custom adapted Kangaroo chair and table set for a child with developmental delays. The child has had a Kangaroo chair and table set for several years. The Kangaroo is generally designed to provide well-supported long floor sitting for children up to primary school age, and has a chair with a winged back support and a height-adjustable table. However, the child still needs long periods on floor sitting to stretch his legs and loosen his leg

Kangaroo Corner Chair

CUSTOM ADAPTATION PURPOSE: To provide supported seating for a child with cerebral palsy, developmental disabilities, and hearing and vision impairments. Made of wood, this low-to-the-floor chair and table set enables the child to sit with correct, supported posture with her legs straight out in front of her to stretch the hamstrings. The set is adjustable and can be used for eating, reading, or play. TITLE: Playing and Growing. JOURNAL: TAD Journal. REF: Volume 25, Number 4, Summer 2005. PAGES:

Kaye Adjustable Benches (Models S1-A, S2-A, S3-A, S4-A, & S5-A)

The Kaye Adjustable Benches are adjustable wooden chairs designed for use by children with lower extremity or neurological disabilities. These height-adjustable benches feature tilt capability and vinyl-covered padded seating surfaces. The benches are useful for learning to move from one level to another or for progressing from floor sitting to bench sitting or from side sitting to upright kneeling, or from sitting to standing. The benches can also be used for dressing or as tables in conjuncti

Kaye Kinder Chairs (Models K1 & K2)

The Kaye Kinder Chairs are positioning chairs designed for use by children with neurological or severe physical disabilities. These wooden chairs are designed for children between one and seven years of age up to 48 inches tall. Model K1 is a low chair designed to fit under preschool tables between 17 and 25 inches tall. Model K2 has long legs and is intended for use at standard 30-inch tables. Model K2 is suitable for children who have outgrown conventional highchairs, but still require that de

Kaye Neat-Seat

The Kaye Neat-Seat is a youth positioning chair designed for use with children ages two to six years with mobility, neurological, or other physical disabilities. Useful for traveling therapists, wooden one-piece unit combines a table and positioning chair and folds flat without tools for storage and transport. This seat provides a firm seat, back, and footrest to maintain proper postural alignment, freeing the child's arms for skilled movement. The chair is particularly useful for children with

Kaye Supine Positioner (Model Sp2)

The Kaye Supine Positioner, model SP2, is a body positioner designed for use with children with neurological, severe physical, or visual disabilities. This unit provides a structure to enable children from one to six years of age to experience visually-directed play in the supine position, encouraging reaching, postural stability of the head and shoulder girdle, visual convergence, visual scanning, and visual attention. The unit consists an adjustable washabel nylon hammock support for the head

Kaye T-Seats (Models Ts-S & Ts-L)

The Kaye T-Seats are adjustable wooden chairs designed for use by children with lower extremity or neurological disabilities. These height-adjustable benches are designed for use with Kaye T-Tables (see separate entry) feature tilt capability and vinyl-covered padded seating surfaces. The benches are also useful for learning to move from one level to another or for progressing from floor sitting to bench sitting or from side sitting to upright kneeling, or from sitting to standing. The benches

Kaye T-Tables (Models Tt-1 & Tt-2)

The Kaye T-Tables are tilt top tables designed for use with children with neurological or fine motor disabilities. Designed to be used in conjunction with Kaye Adjustable Benches, T-Seats, or Straddle Seats, these height-adjustable wooden tables have tilt tops equipped with tow large wooden clamps to properly psition books and papers and a removable wooden ledge to keep items from sliding off the table when tilted. The table top adjusts from horizontal to 90 degrees. Model TT-2 accommodates chil

Kiddo

Kiddo is a sleeping system designed for children with health and mobility disabilities. It offers removable metal grids or wood slats as well as a 4-part rolling mattress platform. There is an electrically operated backrest that can be adjusted from 0-80 degrees. In addition there is an electrically operated knee break and a handset with a locking device. The Kiddo is equipped with 2 IV (intravenous) pole supports at the headboard.

Kinair Iv

The KinAir IV is an air flotation mattress designed for use by individuals with pressure ulcers or at risk for pressure ulcers. The KinAir IV combines advanced pressure relief therapy with a manual wound care turn to provide optimum skin care and positioning. Controlled air suspension and cushion depth help reduce interface pressure, assisting in the prevention and treatment of pressure ulcers. The Nurse Assist turn-and-hold feature helps to reduce shear, save staff time, and may reduce staff i

King's Pride 1000 (Models Kp48801, Kp54801, & Kp60801)

King's Pride 1000 is a heavy-duty motorized bed designed for use by individuals with severe physical disabilities or spinal cord injury. The bed has multiple positioning options, including Trendelenberg, reverse Trendelenberg, or cardio chair. Independent head and knee gatch allow personalized positioning. The foot section plateaus to reduce edema of the lower extremities. The bed has a foam mattress with Ventrex ticking and an eight-button control for all functions. OPTIONS: Digital bed scale (

Kitchen Chair

CUSTOM ADAPTATION PURPOSE: To enable an individual with mobility disabilities to reach counters and perform kitchen tasks. A specially adapted office chair, the seat is rasied above standard height and casters provide mobility; the chair is also equipped with a foot bar for support. The seat has a plywood base with foam padding and is covered in vinyl. The armrest brackets were extended and the armrest upholstered to match. The backrest has a gentle curve for support and is angled five degrees

Knee Wedge Sleep Aid

The Knee Wedge Sleep Aid is body positioner designed for use by individuals with lower back pain or lower extremity disabilities who require knee elevation while lying on their back. The cushion comes with a washable cover. DIMENSIONS (HxL) 5.5 x 18 inches. COLOR: White cushion with blue cover.

Kodel-Bed And Chair Pads (Models 6075, 6076, & 6077)

Kodel-Bed and Chair Pads are decubitus pads designed to reduce friction for individuals who spend much of their time in bed. The Kodel pad allows for even distribution of pressure, permits air circulation and free drainage. It requires no special handling when cleaning and may be autoclaved or machine washed. The pad is stain resistant, flame resistant, non-allergenic and will not support bacterial growth. DIMENSIONS: 15 x 15 inches (6075); 30 x 40 inches (6076); 30 x 60 inches (6077).

Ladder Back Chair (Peto Type Chair).

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Ladder back chairs on skis for sitting on, climbing hands up to get standing or to walk behind. Lists materials needed and provides instructions and drawings for construction of a ladder backed chair built on skis, or runners, for stability. SKILLS REQUIRED: Woodworking. AUTHOR: Hartrick, J TITLE: Equipment to Make: A Guide for Parents with a Child who has a Physical Disability REF: Melbourne, Australia: Health Commission of Victoria: p 19-20 NARIC CAL

Lap Desk

DO IT YOURSELF ENTRY --- PURPOSE: To provide a writing or work surface for individuals using a wheelchair or who are unable to use a desk for long periods. Included in a chapter entitled "Living Room & Leisure Activities," this article provides detailed instructions with illustrations for making a lap desk from Luan plywood. A prototype of the desk is cut out of corrugated cardboard to determine the proper dimensions for the chair with which the lap desk will be used. When complete, the desk

Lap King Wheelchair Lap Desk

The Lap King Wheelchair Lap Desk is a wheelchair lap tray designed for use by wheelchair users. The Lap King is constructed of a two-sided detachable lap tray made of ABS plastic that is attached to a U-shaped microbead fill cushion. The lap tray is reversible with one side having a flat surface on which the user can write, read or eat; and the other side has a dimpled surface that allows the heat generated by a laptop computer to disperse and the computer to remain cool. Both sides of the lap

Laptop Laidback Ergonomic Laptop Table

The Laptop Laidback Ergonomic Laptop Table is a bed desk that allows laptop users to be completely reclined. The height and angle of the laptop table surface can be micro-adjusted to accommodate an individual’s body size and arm length. The ergonomic design of this laptop table keeps the user's arms and elbows in a flat resting position while allowing the palm and fingers to lie flat on the keyboard.

Lava Contour Pillow (Model 51110) & Lava Contour Pillow Case (Model 51120)

Contoured pillow with hot pack insert. Fire retardant hypo-allergenic foam. Soft batting in headrest. Washable. White cotton thermal cover. Zipper closure. 5 by 20 inch lava pad for insertion in pillow slip in section under neck. Non-toxic microwavable fluid. Contoured pillow slip available.

Lava Roll Pillow With Hot/cold Pad (Model 52310) & Hot/cold Pad (Model 42310)

The Lava Roll Pillow with Hot/Cold Pad, model 52310, is a cylindrical pillow with removable pad for hot or cold therapy of the cervical area. The pillow allows for firm or soft density. The Hot/Cold Pad, model 42310, is removable and has a washable cover. DIMENSIONS: The pad is 3 x 10 inches.

Leckey Easy Seat

The Leckey Easy Seat is a youth positioning chair designed for use with children with mobility and neurological disabilities. Designed to provide users with a variety of customized seating options, this seat allows for seat depth, leg height, armrest height, and backrest angle adjustment. Since the legs are independently height adjustable, the seat can also be tilted in space. Other features include an adjustable headrest, a height- and angle-adjustable tray with a molded rim to prevent objects

Leg Extenders.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Simple method to raise the height of furniture. Wooden blocks are made leaving the top 1/3 of their height hollow for the chair or table legs. Should be made to match the width of the furniture legs. Includes drawing. SKILLS REQUIRED: Simple woodworking. AUTHOR: Hale, G. TITLE: Source Book for the Disabled. REF: Book: New York; Paddington Press: p 90. NARIC CALL NUMBER: R0185 1979.

Leg Rest Extension.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Wedge shaped leg rest extension for an armchair. Leg rest to fit against an armchair. Made of plywood in a wedge shape so the high end (including foam padding) is even with, and as wide as the seat of the chair, and slants down at desired angle. Lists materials needed, including plywood, foam padding and cloth to cover; and provides instructions and drawings. SKILLS REQUIRED: Woodworking. Upholstering. AUTHOR: Caston, D TITLE: Easy to Make Aids for Eld

Lever Extender

The Lever Extender is an extension handle for a recliner designed for use by individuals with upper extemity or balance disabilities. Made of heavy-duty padded steel, this handle attaches with four bolts to the existing handle used to raise the footrest of a recliner. DIMENSIONS (LxW): 9 X 7 inches. WEIGHT: 2 pounds.

Liberty Adjustable Desk

The Liberty Adjustable Desk is an accessible computer desk designed for use by individuals who use wheelchairs. This height-adjustable desk has a metal frame, legs, and rear modesty panel. The scratch-resistant laminate work surface has a solid oak smooth, rounded front edge and a rear oak chair rail to prevent computer hardware from sliding off. This desk also features a hinged "flip-top" door that runs the full length of the work surface for access to the cable channel. The desk is available

Liberty Crib

The Little Miss Liberty Crib is a circle bed designed to promote infant safety and provide an unrestricted view for the developing child. The crib offers easier child access to parents and eliminates the dangers of sharp corners found on standard cribs. Wood buttons are included to cover hardware. OPTIONS: Sheet set, watterproof pad, and mattress pad. DIMENSIONS: The crib is 45 inches in diameter and fits under any 8-foot ceiling. COLOR: Standard crib finishes include matte white, matte ivory, a

Lift Chair

CUSTOM ADAPTATION PURPOSE: To enable an individual with dermatomyositis to use a chair. Because the individual was unable to get out of a chair independently, she often had to stand for long periods. Commercially-available lift chairs did not placer in the position she needed in order to stand. The custom-made chair started with a padded, vinyl-covered executive-style office chair which removed from its star-shaped wheeled base. The chair was bolted to a rectangular base tig welded together fro

Lift Chair (Petite Series 1500)

Full power lift and recline chair sized for persons 5 feet 2 inches and under, with hardwood chair frame with steel fasteners and single switch hand control. Screw lift mechanism, powered by 115 volt motor drive, lifts up to 350 pounds. Chair rests on 14 gauge steel base with wide stance for stability. Polyfoam seat cushions. Backs have non-allergic fiber padding. Chair is covered in fire-retardant, velvet fabric, available in a variety of colors. One year warranty on motor, lift mechanism and o

Lift Chairs (Series 2500 & Series 4500)

Both Series 2500 and 4500 chairs have full power lift and recline, hardwood chair frames and 14 gauge steel base frames, steel fasteners and single switch hand controls. Both chair series have screw lift mechanisms, powered by 115 volt motor drives and lift up to 350 pounds. Both have polyfoam seat cushions and chair backs have non-allergenic fiber padding. Chairs are covered in fire retardant velvet fabric available in a variety of colors. One year warranty on motor and lift mechanism and one y

Lift O Matic Seat Chair (Model 1300)

Chair with seat lift. Mechanical spring lift assists person out of chair. Person must sit in chair to release lever to activate lift mechanism. Wooden frame and armrests, upholstered back and seat, vinyl or fabric. Width 22 inches, depth 20 1/2 inches, height 30 1/2 inches, weight 32 pounds.

Lightweight Half Step

This Lightweight Half Step is designed for persons with limited lower body mobility or anyone with walking disabilities. It is for those who find going up or down steps challenging. The Lightweight Half Step is designed to reduce the step height for older and for disabled people. It can be used indoors or outdoors. Made from durable recycled heavy duty plastic. Stable in sunlight and freezing conditions. Top of step has a cross hatch design providing a textured, nonslip service. Can be leveled b

Lil' Desk Mate

The Lil' Desk Mate is a height adjustable tilt desk designed for use by individuals with physical disabilities. This height-adjustable desk features a wide T-shaped base with locking casters and a two-section table top. The desk adjusts for right or left hand use. The smaller section of the table is fixed in a flat position, while the other can be used flat or tilted to support laptop computers, books, or papers. The Lil' Desk Mate's base can roll under most sofas, chairs or beds to position the

Lounge Modification

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a lounge modification for seniors and individuals with mobility disabilities to make it easier to get up from a lounger (i.e. couch) that is low to the ground. This adaptation was created for a woman who found it increasingly difficult to stand up after sitting on her couch due to increase muscle weakness in her upper legs. The couch was set very low to the floor so extra strength was required to rise up to a standing position. A TAD volunt

Low Bed 800 (Model Lb3848)

The Low Bed 800, model LB3848, is a motorized bed designed for use by individuals with severe physical disabilities or spinal cord injury. Includes a foam mattress with Ventrex ticking and an eight-button control for all functions. The bed has multiple positioning, including Trendelenberg, reverse Trendelenberg, cardio chair, and personalized positioning with independent head and knee catch. The foot section plateaus to reduce edema of the lower extremities. POWER: Uses 115 volts. OPTIONS: Digit

Low H Base Overbed Table (Model 11640)

The Low H Base Overbed Table, model 11640, is an overbed table designed for use by individuals with mobility or severe physical disabilities whose bed has low clearance. The table has a four point H-shaped base with four dual wheel nylon casters, two of which lock. Plastic glides are also included to replace the casters. The table also features spring-loaded height adjustment. DIMENSIONS(LxW): 26.38 x 15.25 inches (base); 30 x 15 inches (tabletop). The height with casters adjusts from 19.75 to 2

Ls600 Bariatric Toilet Lift

The LS600 Bariatric Toilet Lift is a portable toilet seat lift and commode with seat lift designed for use by heavy individuals with balance, lower extremity or mobility disabilities. The unit can be wheeled from room to room and bedside to bathroom using a rear push bar. for use as a power bedside commode or over-the-toilet motorized lift. During toilet transfer, it reduces the physical force required by caregivers to help users on and off the toilet. The LS600 can be configured as a height-adj

Machine Washable Sheepskin Bed Pad

The Machine Washable Sheepskin Bed Pad is designed for use by individuals who are at risk for pressure sores/ulcers. This dense pile pad can be used in a bed or chair where the 30-millimeter pile aids in reducing pressure on pressure points. Sleep directly on the wool for maximum benefit. Elastic straps hold the pad in place, but can be cut off if they are not needed. DIMENSIONS: The pad is 24 X 36 inches.

Machine Washable Sheepskin Wheelchair Pad

The Machine Washable Sheepskin Wheelchair Pad is a decubitus pad designed for use by individuals at risk for pressure sores. Designed to cover the entire wheelchair (seat and back), it is made of dense pile to reduce pressure on pressure points. Elastic straps hold the Seat Pad firmly in place. DIMENSIONS: 18 X 36 inches.

Machine Washable Sheepskin Wheelchair Seat Pad

The Machine Washable Sheepskin Wheelchair Seat Pad is a decubitus pad designed for use by individuals who are at risk for pressure sores/ulcers.Made of dense pile, this pad reduces pressure on pressure points and is equipped witrh elastic straps keep it in place on the chair or cushion. This seat pad is machine-washable using the Gentle or Wool cycle and Woolskin. DIMENSIONS: 17 x 18 inches.

Maddacare Footstool

The Maddacare Footstool is an ergonomic footstool designed for use by individuals with lower extremity and circulatory disabilities. This lightweight molded footstool offers two heights for optimal leg positioning in front of toilets, under desks and tables, and in front of chairs and sofas. A built-in handle slot aids in portability. DIMENSIONS: On one side, the stool provides 4.5 inches of elevation; when turned over, the stool provides 6.5 inches of elevation. WEIGHT: 4.5 pounds.

Maddarest Sleep-Aid Bed Wedge (Model H76470)

The Maddarest Sleep-Aid Bed Wedge is a foam wedge cushion designed to provide firm support of the back, shoulders, and head, or may be used to elevate the lower extremities to relieve pain and discomfort. The cushion has a zippered, removable cover made of PVC-covered white nylon which is sanitized to guard against mildew and fungus growth. The cover may be machine washed and tumble-dried. DIMENSIONS: 27 x 27 inches with 1/2 inch thick at the low edge; the high edge is available in heights of 7

Making A Wheelchair Worktable.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Accessible height table with body cutout for wheelchair users. Wooden table with legs high enough to clear a wheelchair. Body cutout to allow person to get closer to work. Backboard and sideboard help prevent things from falling off the back of the table. Instructions includes dimensions and how to secure the legs. Includes drawings. SKILLS REQUIRED:Simple woodworking. TITLE: Home Improvement and Repair: Special Purpose Rooms REF: Book: Time Life Books

Manual Crank Bed (Model 5307)

The Manual Crank Bed is an adjustable bed designed with a two crank assembly that operates the head and foot sections. The hi/low crank system is constructed to insert into the head/foot ends to raise and lower the bed; the crank folds away for storage. DIMENSIONS (L xW): 88 x 36 inches. The overall bed height adjusts from 16 to 24.25 inches, the head end adjusts from 28 7/8 to 37.25 inches high, and the foot adjusts from 26.25 to 37 7/8 inches high.

Manual Height Adjustable Work Table (Model 8858A)

The Manual Height Adjustable Work Table, model 8858A, is an accessible table or workstation designed for use by individuals who use wheelchairs. Made with double pedestals to accommodate wheelchair users, the table height adjusts by means of a fold-away hand crank extending from the pedestals. The table features a wide laminate top that allows for extra work space. OPTIONS: Maple, formica, or steel table tops are available. DIMENSIONS: The top is 36 x 60 inches and the height adjusts from 26 to

Manual Height-Adjustable Activity Table

The Manual Height-Adjustable Activity Table is an accessible table or computer workstation designed for use by individuals who use wheelchairs. The table height adjusts with a hand crank system. The table has a laminate top. DIMENSIONS (HxLxW): 27 to 39 x 48 x 30 inches or 27 to 39 x 60 x 30 inches.

Marathon Table

The Marathon Table is a height-adjustable computer workstation designed for use by individuals who use wheelchairs or who stand to work. Depressing a release paddle enables immediate, yet controlled, surface height positioning. A two-way brake locks the work surface in both upward and downward directions. For user safety, a weight-sensing interlock releases the brake only when the table is properly counterbalanced. Counterbalance supports loads between 75 and 225 pounds, allowing immediate adjus

Marsh Handicap Furniture

Marsh Handicap Furniture includes kitchen and bathroom cabinets, desks, and bookcases designed to be accessible to wheelchair users. Toe kicks beneath cabinet floors are higher and deeper to allow for passage for wheelchair users. Hinges open 180 degrees for barrier free access. Cabinet heights are customizable. Furniture is available in many styles and finishes. DIMENSIONS (HxD): Toe kicks are 8.5 x 6 inches.

Masonite Folding Bed Boards (Models 1950, 1951, & 1952)

The Masonite Folding Bed Boards, models 1950, 1951, and 1952, are designed to increase the firmness of a mattress. The masonite bed boards fold into 4 15-inch segments (5 feet long) and have a unique plastic hinge which makes usage easy. SIZES (WxL): The Twin is 30 x 60 inches; Medium is 36 x 60 inches; Double is 48 x 60 inches. WEIGHT: Twin and medium 17 pounds; Double 27 pounds.

Massaging Pillow (Models 3128 & 3128A)

The Massaging Pillow, models 3128 and 3128A, is a vibrating pillow designed for use by individuals with upper extremity or severe physical disabilities.This pillow was designed to be used to help promote proper posture and provide back and neck support for activities such as activating a capability switch. It has low and high vibrating modes, and it can be used while in a wheelchair, office or automobile. POWER: Requires 2 D batteries. DIMENSIONS (DxLxW): 5 x 13 x 13 inches (model 3128) or 4 x 1

Mattress Genie

The Mattress Genie is an inflatable mattress raiser designed fro use by individuals with severe physical or respiratory disabilities or back pain. Placing the inflatable unit under the head or foot of the bed enables the user to raise the head or the foot up to a 40-degree angle. A three-button hand-held lighted remote enables the user to control the attached air pump to increase or decrease the angle of elevation or return the mattress to the horizontal position. The elevation unit is attached

Mattress Pad With Wings

The Mattress Pad With Wings is an incontinence pad designed to protect beds and other surfaces for individuals with incontinence. This pad is designed with large fabric wings that tuck under one or both sides of the mattress to help secure the pad in place. The pad is made with three layers; the top layer is made of a quilted cotton and polyester blend that is quilted to an 8-ounce polyester soaker layer that holds moisture. The third, and bottom layer, is the moisture proof layer; it is made fr

Mattress Protector

The Mattress Protector is a mattress protector designed for use by individuals with incontinence. It is made of durable vinyl to help protect the mattress from stains and odors and fits hospital-sized beds as well as some twin standard home mattresses. The Mattress Protector is also available with a zipper for a more secure fit or in a contour design. DIMENSIONS (HxLxW): 5 x 77 x 34 inches. The Mattress Protector fits mattresses which are 6 x 80 x 36 inches or 6 x 76 x 36 inches.

Mattress Protector

The Mattress Protector, models 8052, 8053, 8054, 8055, 8066, 8067, 8068, 8069, is designed to protect mattresses from moisture. This protector is made of machine washable, odorless, white opaque material which is flameproof and hypo-allergenic. The material is anti-bacteriostatic and waterproof even at the seams. OPTIONS: contoured plastic or zippered plastic. DIMENSIONS: twin, 39 x 75 inches; full, 54 x 75 inches; queen, 60 x 80 inches; king 76 x 80 inches.

Mattress Protector (Models 7001, 7002, 7003, & 7004)

The Mattress Protector is a mattress cover designed to protect the mattress from moisture. The protector is contoured, flameproof, and hypoallergenic; made of white opaque plastic. DIMENSIONS: 39 x 75 inches (Twin); 54 x 75 inches (Full); 60 x 80 inches (Queen); 76 x 80 inches (King).

Mattress Protectors (Models 8043, 8044, 8045, 8046, & 8051)

The Mattress Protectors, models 8043, 8044, 8045, 8046, 8051, are designed to protect mattresses from moisture. These protectors are made of machine washable, odorless, white opaque material which is flameproof and hypo-allergenic. The material is anti-bacteriostatic and waterproof even at the seams. OPTIONS: contoured plastic (8043); zippered plastic (8044); contoured plasticized nylon (8045); zippered plasticized nylon (8046); disposable version (8051) available. DIMENSIONS: Hospital bed size

Mattress Straps

CUSTOM ADAPTATION PURPOSE: To prevent a plastic-covered mattress from sliding off a home hospital-style bed. The hospital bed has a plastic-covered mattress on top of the main mattress. The plastic cover caused the mattress to slide off the bed while the user was in bed. Long belts were made out of seat belt webbing and buckles were attached to each end. The belts were then bolted to the underside of the bed. When buckled over the mattress, the belts hold the mattress in place and prevent it fr

Maxi Rest Bariatic Bed (Models 4748B, 4748D, 4748Dx, 4748Sb, 4748Sd & 4748Sdx)

The Maxi Rest Bariatric Bed, models 4748B, 4748D, 4748DX, 4748SB, 4748SD and 4748SDX, is a motorized bed designed for use by individuals with obesity and severe physical disabilities or spinal cord injury. This bed features standard powered height adjustment, fowler backrest and leg lift and optional powered Trendelenburg and reverse Trendelenburg. It has a battery backup and a standard remote control. A one-piece frame (models 4748B, 4748D and 4748DX) or two-piece frame (models 4748SB, 4748SD

Maxi-Lift Bariatric Trapeze (Model 5160)

The Maxi-Lift Bariatric Trapeze, model 5160, is a trapeze designed for use in in-bed positioning with individuals with obesity, mobility or lower extremity disabilities, or spinal cord injury. The freestanding unit consists of triangular trapeze suspended a boom extending from a vertical triangular frame mounted on a low-profile base that fits under a bed frame so that the trapeze hangs over the bed. DIMENSIONS (LxW): 61 x 26 inches (base). Overall height is 68 inches. The boom extends 35 inche

Maxi-Lift Bariatric Trapeze (Model 5165)

The Maxi-Lift Bariatric Trapeze, model 5165, is a trapeze designed for use in in-bed positioning with individuals with obesity, mobility or lower extremity disabilities, or spinal cord injury. The freestanding unit consists of triangular trapeze suspended a boom extending from a vertical triangular frame mounted on a low-profile base that fits under a bed frame so that the trapeze hangs over the bed. DIMENSIONS (LxW): 61 x 26 inches (base). Overall height is 68 inches. The boom extends 35 inche

Maxi-Lift Bariatric Trapeze (Model 5171)

The Maxi-Lift Bariatric Trapeze, model 5171, is a trapeze designed for use in in-bed positioning with individuals with obesity, mobility or lower extremity disabilities, or spinal cord injury. The freestanding unit consists of triangular trapeze suspended a boom extending from a vertical triangular frame mounted on a low-profile base that fits under a bed frame so that the trapeze hangs over the bed. This model of the Maxi-Lift Bariatric Trapeze is specially designed for use with the Gendron Max

Mcbuddy Adjustable Amputee Stool

The McBuddy Adjustable Amputee Stool is an adjustable stool designed for use by individuals with lower extremity amputation. This transportable, height-adjustable stool has a rectangular padded seat to support the remaining stump during activities requiring standing, including shaving, showering, working at a counter, etc. The stool has a powder-coated, height-adjustable steel tripod base. DIMENSIONS: The height adjusts from 18 to 36 inches. CAPACITY: 500 pounds. WEIGHT: 7 pounds. COLOR: Burgund

Med Aire Alternating Pressure Pump And Pad System (Models 14001, 14001Ef, & 14002)

The Med Aire Alternating Pressure Pump and Pad System is an alternating air pressure mattress surface designed for use by individuals who are at risk for pressure sores/ulcers. The variable pressure pump produces an air flow of eight liters per minute. It is available with a pad with end flaps (model 14001EF) or without end flaps (model 14001). OPTIONS: Fixed pressure pump and pad, model 14002; replacement pumps and pads; filter; clear or beige tubing; and a basket for alternating pressure pump.

Med Bed

Designed for home care, semi-electric bed comes fully assembled and uses existing bed frames. Mattress support fabric is steel link spring mesh. Electrical components use 115 volt, 60HZ outlets, are UL recognized and CSA certified. Bed is lightweight and on casters. Specifications: length 79 inches, width without rails 37 1/2 inches, maximum back angle 60 degrees, maximum height angle 60 degrees, folded height 44 inches, folded depth 18 1/2 inches. One year warranty on material and workmanship.

Med I

Accessible all purpose table has nickel chrome legs with twin wheel casters, 2 locking and 2 nonlocking. One piece molded top has slate look finish; measures 24 inches by 36 inches. Has 5 adjustable leg heights from 27 inches to 33 inches. Available in standard colors; custom colors extra.

Med Ii, Med Iie, Med Iif.

Accessible U shaped activity table. One piece molded fiberglass top is 18 inches wide with slate look finish. Available in standard colors; custom colors extra. Outer measurements are 72 inches wide by 48 inches deep; inner measurements, 36 inches wide by 30 inches deep. Med II has twin wheel casters, 2 locking and 3 nonlocking; five leg height adjustments from 27 inches to 33 inches. Med IIE has telescoping legs held in position with thumb screws; legs are equipped with plastic end caps. Med II

Med Iii Adapted Oval Patio Table

Accessible table. Adapted oval patio table accommodates 4 wheelchairs between 4 attached stationary seats. 14 gauge tubular steel frame and legs have zinc and dry powder coating. Stain and heat resistant. Optional built in umbrella mount. Table available in standard colors; custom colors extra. Umbrellas available in matching colors. Maximum width 69 inches; maximum length 78 inches; 31 1/2 inches between stationary seats.

Med Iv Dining And Activity Table

Four place dining and activity table accommodates wheelchairs with elevated leg rests. Wheelchairs may be staggered or placed all on one side. Nickel chrome legs have twin wheel casters, 4 locking and 2 nonlocking. One piece molded top is heat and stain resistant; measures 104 inches by 20 inches; has slate look finish. Leg height adjusts to 27 inches, 28 1/2 inches, 30 inches, 31 1/2 inches or 33 inches. Available in standard colors; custom colors extra.

Medic-Air Snooze Pillo

The Medic-Air Snooze Pillo is an inflatable cervical pillow designed for use by individuals with neck pain, injury or disability. Made of durable nylon coated vinyl with open-valve air system, this pillow provides support for the head and cervical spine while sleeping, sitting or relaxing. The cushion inflates to a desired comfort level and deflates for portability. DIMENSIONS (HxLxW): 14 x 9 x 5 inches when inflated. COLOR: Blue or burgundy.

Medical Sheepskin

Medical Sheepskins are decubitus pads designed for use by individuals at risk for pressure sores/ulcers. These tanned natural sheepskins are washable and can be used in hospital and nursing home beds, wheelchairs, and in homes on chairs and beds. DIMENSIONS: The average size is 9 square feet and the wool length is 0.75 inch long. COLOR: Natural.

Medical Sheepskin (Model 101)

The Medical Sheepskin, model 101, is a decubitus pad designed for use by individuals at risk for pressure sores or ulcers. This tanned natural sheepskin is machine washable and dryable. It can be used in hospital and nursing home beds, wheelchairs, and in homes on chairs and beds. DIMENSIONS (LxW): 3 x 2.5 feet average size. COLOR: Natural.

Mediflow Pillow

The Mediflow Pillow is designed for use by individuals with neck pain, injury, or disability. This three-layer pillow has a center layer of water that enables the pillow to conform to the shape of the user's head while he or she moves, providing uninterrupted consistent support. The pillow has a thermal insulator to help maintain a comfortable temperature. The soft outer layer is of hypo-allergenic polyester fiber. DIMENSIONS (LxW): 28 x 20 inches. Gusset is6 inches. WARRANTY: 3 year limited wa

Medline Advantage 2900 Max Mattress (Models Mscadv2976, Mscadv2980, & Mscadv2984)

The Medline Advantage 2900 Max Mattress is a foam mattress designed for use by individuals at risk for pressure sores. This pressure- relieving mattress is made of Densiflex and Densiflex HR foam, with a base layer of Densiflex HD, and is covered with Nylex Ultra Stretch fabric, a fluid-proof, antimicrobial, flame-retardant material. The heel section is sloped. The mattress is available with fire barrier fabric and/or a raised edge. DIMENSIONS (HxLxW): 6 x 76 x 36 inches (model MSCADV2976), 6 x

Memory Foam Contoured Leg Support

The Memory Foam Contoured Leg Support is a leg rest designed for use by individuals with circulatory or lower extremity disabilities or arthritis. This adjustable hypoallergenic, flame-retardant memory foam wedge elevates the user's legs and the contoured surface conforms to the leg shape. The foam rebounds to its original shape when not in use, eliminating sagging and settling. The support comes with a foam insert that allows the height of the support to be adjusted. The included washable cove

Memory Foam Pillow

The Memory Foam Pillow is a contoured pillow designed for use by individuals with back or neck pain. This dense, high-quality memory foam pillow uses body heat to mold to the user's natural contours and the foam allows air circulation for comfort. The included cover is washable, and the pillow fits standard pillow cases. DIMENSIONS: 19 x 13 x 4 inches. COLOR: White cover.

Memory Foam Travel Neck Pillow (Model Vm-161)

The Memory Foam Travel Neck Pillow, model VM-161, is a cervical pillow designed for use by individuals with neck and shoulder pain or arthritis. This U-shaped travel pillow is designed to support the head and neck as the body weight and temperature conforms the foam to the shape of the user’s body.

Merry Motivator

The Merry Motivator is a height-adjustable geriatric chair designed for use by individuals with mobility, walking, or balance disabilities. This chair is designed to enable the user to remain seated while propelling the chair with his/her feet. The design keeps the coccyx off the seat, reducing the risk of pressure build-up and ulcers. Standard features include a low pressure seat with pneumatic lift for height adjustments, a high back, washable upholstery, side pouch, a non-tip U-shaped base, f

Metal Bed Support Rail / Handle (Model 122)

The Metal Bed Support Rail/Handle, model 122, is a grab bar for bed designed for use by individuals with mobility or balance disabilities. This tubular aid has a fixed nylon coated supporting bar and an adjustable plastic coated supporting bar. The base fits between the bed base and the mattress. DIMENSIONS: The height of the unit adjusts from 490 to 645 millimeters (mm), the width of the base at the widest point is 590 mm, and the width of the support rail is 310 mm. The overall length is 700 m

Midland Child / Adult Combination Work Table (Models 7082)

The Midland Child/Adult Combination Work Table is a height adjustable tilt top work table with a cut out designed for use by children and adults who use wheelchairs. The table features a rimmed maple tabletop that tilts to any angle up to 45 degrees and a tubular steel frame on a U-base with locking swivel casters. Model PC 7082 ($1349) is crank-adjustable. DIMENSIONS: The table surface is 26.5 inches square and the height adjusts from 24.5 to 31 inches. The casters are 3 inches in diameter.

Midland Combination Work Table (Model 7081)

The Midland Combination Work Table, model 7081, is a height adjustable tilt top worktable designed for use by individuals who use wheelchairs. Designed for use with tilt table or wheelchair, this adjustable height table accommodates children and adults. The table top may be tilted to various positions with a 45 degree maximum tilt. Features include tubular steel frame mounted on 3- inch swivel casters with locks. DIMENSIONS: Height adjusts from 26 to 40 inches. Table top is 30 by 36 inches.

Midland Round Work Table (Model 8859F)

The Midland Round Work Table, model 8859F, is a height adjustable, swivelling work table designed to accommodate up to four wheelchair users. The table features a solid wood butcher block top on a metal pedestal with a hydraulic lift mechanism. DIMENSIONS: The height adjusts from 27.5 to 34 inches and the top is 48 inches in diameter. The base is 24 inches in diameter.

Midland Wheelchair Work Table (Model 7080)

The Midland Wheelchair Work Table, model 7080, is an adjustable height tilt top table designed for use by individuals with mobility disabilities. This table has a chrome plated steel frame and swivel casters fitted with step-on brakes. The table fits over any wheelchair. The Formica tray has a raised rim, and tilts to a 45-degree angle. Table is latex free. DIMENSIONS (HxLxW): 28 to 39 x 32 x 36 inches. Cutout is 22 x 6 inches. Base measures 34 inches in width and 26 inches in depth.

Mighty Rest Rehabilitation Bed

The Mighty Rest Rehabilitation Bed is a motorized bed designed for use by obese individuals. The bed is available in full electric and semi-electric models and includes a high-density, fire-resistant foam mattress with staph check covering and a hospital plug. FRAME: The heavy-duty frame splits in half for transport and includes oak head- and footboards and one set of powder-coated half rails. The height adjusts from 13.5 to 30 inches. Chrome half-rails and a second set of powder-coated half rai

Millennium Canopy Crib

The Millennium Canopy Crib is a circular bed designed for use with infants with cognitive or severe physical disabilities. Designed to promote infant safety and provide an unrestricted view for the developing child, this wood crib offers easier child access to parents and eliminates the dangers of sharp corners found on standard cribs. The crib has drop-side access and comes with dome and canopy kits. OPTIONS: Round mattress, bedding and linens, watterproof pad, and mattress pad. DIMENSIONS: The

Millennium Recliner

The Millennium Recliner is a vibrotactile amplification system designed for use by individuals with cognitive, neurological, physical, or emotional disabilities. Used for positioning, calming, or stimulating, this chair features modern styling and curved arms. A built-in patented vibroacoustic speaker system provides tactile stimulation, enabling users to feel music as well as hear it for a full-body experience of sound and vibration. This device connects to most stereo systems with 10 to 100 wa

Mini Jumbuk Superwool Underlay

The Mini Jumbuk Superwool Underlay is a mattress cover designed for use by individuals who are at risk for pressure sores/ulcers. Designed to fit over the mattress beneath the bottom sheet, Superwool Underlays relieve pressure points and provide added and even support for the body. The wool is water repellant but moisture absorbant, helping the body's natural cooling process by encouraging moisture to evaporate away from the skin. This product is naturally non-allergenic and flame resistant. SIZ

Mini-Bolster Chair

Chair with straddle position design. Adjustable height, 8 to 11 inches. Accessories: 28 1/2 inch wide by 22 inch deep tray, adjustable pelvic strap, and handle. 22 inch by 19 1/2 inch base with swivel casters and safety railing available. .

Miracle Casters

Miracle Casters are casters for office chairs designed for use by individuals with lower extremity or mobility disabilities or arthritis. These casters designed to replace standard casters that have a 7/16-inch diameter stem and are approximately twice as large as standard casters. DIMENSIONS: 4 inches in diameter. COLOR: Black. WARRANTY: 10 years.

Mjm Low Bed (Models 680-40-R & 676-40-S)

The MJM Low Bed, models 680-40-R and 676-40-S, is a manual adjustable bed designed for use by individuals with lower extremity or neurological disabilities or Alzheimer's disease. The low adjustable height is helpful to individuals with physical disabilities who have difficulty getting into a higher bed, and safer for individuals who are at risk for falling out of bed. The bed comes with a multi-position elevated headrest. It has no sharp edges, and the mattress (not included) is held in place w

Mjm Multi-Position Bariatric Geri Chair (Model 518-Sl)

The MJM Multi-Position Bariatric Geri-Chair, model 518-SL, is a multi-position, bariatric geriatric chair designed for use by individuals who have mobility, balance, or neurological disabilities. The chair has a PVC plastic frame with push handle, a fully-padded seat with a tall seatback, and a cushioned leg rest. The chair is equipped with four threaded-stem casters. DIMENSIONS (HxW): 22 x 21 inches. The casters are 5 inches in diameter. CAPACITY: 300 pounds.

Mjm Multi-Position Bariatric Geri-Chair (Model 518-Pl)

MJM Multi-Position Bariatric Geri-Chair, model 518-PL, is a multi-position bariatric geriatric chair designed for use by individuals 5 feet, 4 inches tall or under who have mobility, balance, or neurological disabilities. This chair has a PVC plastic frame with push handle, a fully- padded seat, a tall seatback, and a leg cushion. The chair is equipped with four threaded-stem casters. DIMENSIONS (HxW): 22 x 18 inches. The casters are 5 inches in diameter. CAPACITY: 300 pounds.

Mjm Portable Overbed Table With Casters (Model 699-F3)

The MJM Portable Overbed Table with Casters, model 699-F3, is an overbed table designed for use by individuals with severe physical disabilities or spinal cord injury. The frame is made from PVC plastic. DIMENSIONS (HxLxW): 28.5 x 46 x 19 inches. The table top is 19 x 25 inches.

Mjm Transfer Chair (Model 509-Mri)

MJM Transfer Chair, model 509-MRI, is a three-position geriatric chair designed for use by individuals with mobility, balance, or neurological disabilities. This chair has a non-magnetic stainless steel frame, an anti-bacterial seat and back cushion, and a sliding footrest. DIMENSIONS: The external width is 28 inches and the internal width is 24 inches. The casters are 5 x 1.25 inches.

Mjm Transfer Chair (Model 530-S/bariatric)

MJM Transfer Chair, model 530-S/Bariatric, is a three-position bariatric geriatric chair designed for individuals with mobility, balance, or neurological disabilities. This model has a PVC plastic frame, four threaded-stem casters, and a padded seat, back, head bolster, and leg cushion. OPTIONS: Dual drop arms. DIMENSIONS: The external with is 34 inches and the internal width is 30 inches. The casters are 5 inches in diameter. CAPACITY: 700 pounds.

Mobile Base For Sleep System

CUSTOM ADAPTATION PURPOSE: To provide mobility for a Dreama Sleep System used by a child with leukodystrophy and severe scoliosis. For comfort and to slow the development of the scoliosis, the child spends most of his time lying on his side. However, doing so in the bed meant he was isolated from household activities. To make the bed mobile, a frame was constructed of square tubular steel with a plywood base attached to the underside. Attaching the base to the underside of the frame enabled th

Mobile Dining Table

CUSTOM ADAPTATION PURPOSE: To provide a means for an individual with multiple sclerosis to transport meals and eat comfotably in a small apartment. A rolling table was built from melamine coated wood that fit comfortably in the space between the living room and the kitchen. The table has two shelves beneath the eating surface, one accessible from both sides and the other from the kitchen side only. Designed to be easy to clean and move, the table is equipped with four double-wheeled furniture c

Mobile Open Toe Overbed Table (Model 251C)

The Mobile Open Toe Overbed Table, model 251C, is an overbed table designed for individuals who spend long periods of time in bed or who use wheelchairs. Constructed of durable plastic- coated one-inch tubing, this height- and tilt- adjustable table has a U-shaped base with casters and a laminated teak wood top with raised edges on each side. Two durable plastic hand wheels enable the user or caregiver to raise or tilt the table allowing the top to be set at varying heights and angles. DIMENSION

Mobile Treatment Stool (Model 16011)

Caster stool. All welded, chrome steel frame and 2 inch ball bearing casters. 14 by 14 inch padded seat, 17 inch height, 13 by 17 inch spread of legs.

Mobile Treatment Stool (Model Pc 6129)

The Mobile Treatment Stool, model PC 6129, is a caster stool designed to provide mobility and comfort to therapists, teachers, and other adults in situations where they need to sit and work at a child's level. The stool has a tubular steel frame with a 2-inch foam-padded seat covered with Naugahyde. DIMENSIONS: 14 x 14 x 17 inches. COLOR: Seat cover is chesnut brown.

Mobilite Homecare Bed Systems

Hospital type bed for home care. Three types: Full electric model electrically adjusts back and knee supports and raises or lowers bed. Semi-Electric model electrically adjusts back and knee supports, with manual crank to raise and lower bed. Manual models have cranks for all adjustments.

Mobility Clutch And Pouch

The Mobility Clutch and Pouch is a carrying bag that can be attached to canes, crutches or walkers, a wheelchair side pouch, or a bed pouch. This pouch carries items such as keys, money, and medications and attaches with Velcro to mobility aids and bed rails. This clutch has a removable carrying strap and an outside pocket for glasses or a cell phone. COLOR: Black, red, or pink.

Mobility Stool

CUSTOM ADAPTATION PURPOSE: To provide mobility for a parent or therapist while assisting a child with balance and walking skills. Designed to keep the parent or therapist at the right height near floor level for assisting a young child, the stool has a square plywood base equipped with furniture casters, wooden doweling legs to attach the seat to the base, and a plywood seat. TITLE: Keeping Active. JOURNAL: TAD Journal. REF: Volume 27, Number 3, October 2007: p. 12-13. PAGES: 3. (including cov

Model 100 Workstation

The Model 100 Workstation is a height adjustable desk or computer work center designed for use by individuals who use wheelchairs.The unit features a steel frame, a height-adjustable worksurface, an EasyRoll wheelchair platform, and a ramp. This desk is available with either manual hand crank or a motorized height adjustability of the worksurface. Hand crank models have a foldable hand crank (.5 inches of adjustment per revolution) and the motorized models have push button controls. The works

Model 200 Workstation

The Model 200 Workstation is a height adjustable desk or computer work center designed for use by individuals who use wheelchairs. The unit features an aluminum frame, a fixed height worksurface with a backsplash, an EasyRoll wheelchair platform, and a ramp. The worksurface is made from plywood with WilsonArt plastic laminate. The ramp and platform are covered in nonskid rubber. The workstation includes an EasyRoll wheelchair platform, which allows the user to move laterally for the length of t

Modified Bunk Bed

CUSTOM ADAPTATION PURPOSE: To enable a teenage girl with osteogenesis imperfecta (brittle bones) to safely use a bunk bed. In order to create needed space in a shared bedroom, two single beds were joined as bunk beds. However, there was concern that the limited head room on the bottom bunk would result in the child with osteogenesis imperfecta accidently injuring herself. Similarly, the upper bunk posed risks due to falls or other injury while climbing up. Also, the top bunk would limit access

Modified Chair Lever

CUSTOM ADAPTATION PURPOSE: To provide a customized adaptation to operate the level mechanism of a reclining chair for an individual with right arm weakness. The original lever was quite short and positioned low down on the right side making it very difficult to push down to raise and lower the leg support section of the chair. A handle was created that bent out far enough from the base so it cleared the chair armrest and with a modified handgrip for easier grasping. A bent section of square ste

Modified Crib

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted crib for a mother with C6-7 quadriplegia who uses a motorized wheelchair and. The mother has wrist function but no use of her fingers. She did not have the reach or strength to operate the crib’s drop side, and could not get near enough to the crib once the side was down because it got in the way of her chair. Previous adaptations by TAD staff would not work in this case since the mother used a motorized wheelchair. A TAD v

Modified Desk Chair

CUSTOM ADAPTATION PURPOSE: To enable an individual with short stature to sit comfortably at her desk. A commercially-available swiveling desk chair was purchased and virtually rebuilt. The seat was removed from its existing base and mounted on a custom-built parallelogram-shaped base which was attached to a screwjack to raise and lower the chair height while keeping the seat horizontal. The screwjack was powered by a 50-watt direct-current (DC) motor. This enabled the user to sit on the chair a

Modified Dining Chair

CUSTOM ADAPTATION PURPOSE: To enable an individual who uses a walker and has upper extremity weakness to transfer safely to a dining chair for meals. The individual required a chair that enabled her to sit and then swivel into position and lock the seat in position for eating. A standard office chair with a five-legged star base was purchased. To ensure the chair would be safe and stable during transfers, the existing casters were removed and replaced with rubber feet. Because the left armrest

Modified Dining Chair

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted dining chair for a young woman with Dravet syndrome, an intellectual disability and epilepsy. Her seizures are severe and hard to control. When the young woman was younger she use to sit at the kitchen table using a high chair but as she got older, she outgrew the high chair and now needed a new way to sit comfortably at the dinner table. Upon initial evaluation, the assessment team tried a TAD Michelle Tilt-in-Space Supp

Modified Stool

CUSTOM ADAPTATION PURPOSE: To enable an individual with muscle weakness and balance disabilities to work safely in the kitchen. A stable shower stool with a large, molded plastic seat was modified for use in the kitchen. To increase the height, the lower sections of the legs, which have height-adjustment holes and rubber feet, were removed, as were the spring clips in the upper legs. The legs were then extended with a stub insert tube. New holes were drilled in the extensions for the spring cli

Modified Work Chair For Parts Fabricator

DO IT YOURSELF ENTRYPURPOSE: To enable individuals with neurological, mobility or balance disabilities to work at a parts fabrication workbench that could not be modified. For individuals with balance and neurological disabilities, standing or sitting on high stools to perform production work is often not an option. To create this adaptation, a commercially available industrial work chair was purchased off-the-shelf and modified. The chair had sufficient height adjustment , but to adjust the hei

Modulus Foam Mattress

The Modulus Foam Mattress is designed for use on hospital beds for people with back pain or who are at risk for pressure sores. Available with or without built up sides, this individual indinidual foam cell mattress provides moderate pressure reduction and includes Staph-Chek Fusion cover. DIMENSIONS (DxWxL): Both models are 4 x 35 x 80 inches.

Monroe Age Appropriate Youth Bed

The Monroe Age Appropriate Youth Bed is an adjustable bed designed for children and young adults with disabilities who are at risk for falling or climbing over the siderails. Available in a fully electric or manually adjustable models, this bed offers Gatch Trendelenberg positioning, Hi-Lo adjustment, and full-length crib-style rails. This bed also includes clear vinyl panels above the siderails and head- and footboards. Available in three sizes, this bed comes standard with an innerspring mattr

Mor-Loc Kodel Bed Pads (Models 60-140, 60-150 & 60-160)

Mor-Loc Kodel Bed Pads are decubitus pads designed to provide comfort and prevent bed sores for individuals who are bed ridden. They are made with fire retardent allergy-proof Kodel synthetic pile. DIMENSIONS: Available in pads measuring 24 x 30 inches, 30 x 40 inches, and 30 x 60 inches.

Mor-Loc Round-A-Bout (Model 60-215)

The Mor-Loc Round A Bout is a cylindrical cervical pillow designed to maintain proper alignment of the neck while sleeping for individuals who have neck or back strain. The product is filled with Dupone Dacron Holofill polyester fibers. DIMENSIONS: 7 inches diameter x 17 inches.

Mor-Loc Tag-A-Long & Cerv-O-Curve

The Mor-Loc Tag-A-Long & Cerv-O-Curve are cervical pillows for individuals who need to maintain proper posture while sleeping. They are made of polyurethane foam with Dupont dacron Holofill II and a polyester lining. The pillow is especially contoured to give comfortable support to the neck area. Different styles of the Cerv-O-Curve offer diferent support areas depending on your need. The Tag-A-Long is a smaller version of the Cerv-o-Curve designed for travelling purposes. DIMENSIONS: 17 x 2

Multi-Purpose Table

The Multi-purpose Table is designed to provide eating and work space for individuals who are in bed for extended periods or who require a mobile work surface. This height-adjustable table can be used over chairs or bed and features a wipe-clean Formica top that can be used flat or tilted up to 180 degrees and a wooden T-shaped base with three casters. DIMENSIONS: The height adjusts from 29 to 38 inches. The table surface is 25.5 x 14.5 inches. WEIGHT: 25 pounds. COLOR: Woodgrain top.

Multi-Purpose Table

The Multi-Purpose Table is an overbed table designed to permit activities and eating while in bed. This table has a metal C-shaped base with casters and a two-section, height-adjustable table top. The table has a small stationary section and a larger tilt-top section with a plastic lip to prevent items from sliding or rolling off. DIMENSIONS: The height adjusts from 27 to 42 inches. The table top is 15 x 30 inches.

Multiple Place Cut Out Table (Model 6254)

Table with 4 cut outs to provide individualized table work space for 4 children. Height adjusts from 23 to 36 inches. 2 cutouts are 8 inches by 13 inches and 2 cutouts are 8 inches by 16 inches. Overall size is 96 inches long and 30 inches wide. Tabletop is heavy duty plastic. Useful for children in wheelchairs for sliding chairs close to table.

Murphy

The Murphy is a seat lift recliner chair designed for use by individuals with mobility disabilities. This motorized chair has a hardwood frame; a welded steel base; heavy-gauge, no-sag steel springs in the seat and back; dacron fibers in the arms, back, and chaise for shape retention; and a cushioned seat for comfort and support. Covered in acrylic and Olefin fabric, this chair also features traditional styling with a 10-button chair back design. In addition to the lift-out feature, this chair o

Mutli Position Sleeping Pillow

The Multi Position Sleeping Pillow is a pillow and lumbar mat designed to support the cervical and lumbar spine. Useful for side, back and stomach sleepers. Supports the cervical and lumbar spine, and cushion knees and hips. Side Sleepers: Place the pillow between knees and the lumbar mat under lower back for spinal alignment. Back Sleepers: Place the pillow under neck and the lumbar mat under lower back to compensate for sagging mattresses. Stomach Sleepers: Place the pillow under one shoulder

My Place Laptop Table

The My Place Laptop Table is a notebook or laptop computer support and bookholder designed for use by individuals with mobility or upper extremity disabilities. This lightweight work station can be used while seated in a chair or reclining in bed for writing, using a laptop, reading, doing crafts and more. It has fold-out legs, which adjust to set the tabletop at the optimal height. The tabletop has two panels, the angle of which is independently adjustable. The left panel is designed to hold th

Nada-Chair

The Nada Chair is an adjustable posture chair with poly/cotton pad to provide extra support for the lumbar (lower back) area. The fabric "back- sling" uses the knees to brace the back and maintain the curve of the lower spine. Webbed straps extend from the back pad around the knees while sitting. A buckle between the knee straps prevents legs from abducting. Padded around the knees and back for extra comfort. COLORS: Assorted.

Nature Sleep 500

The Nature Sleep 500 is a foam mattress surface designed for use by individuals at risk for pressure ulcers. This surface provides anatomic support to reduce pressure, cradling pressure zones and enabling the body to relax in a neutral posture. The Heel Ease feature provides protection for the heels and adjusts to the height and comfort requirements of the user. This pad fits standard hospital beds and includes a cover. DIMENSIONS: 5 inches thick.

Neck L O Travel Pillow

The Neck-L-O Travel Pillow is a U-shaped pillow designed to provide cervical support. It is filled with odorless, nonallergenic polyester fiber, and it is washable. COLORS: Assorted. Covers are available for $3.98.

Neck Rest

The Neck Rest is a neck support designed to provide relief of pressure on the neck or shoulder muscles. The polyurethane foam support features a U-shaped groove in the center to support the neck. A polycotton cover is included. DIMENSIONS (WxHxL): 6 x 6 x 14 inches long. COLOR: The cover is available in white or blue.

Neck Rest Inflatable Travel Pillow (Model Nr-1)

The Neck Rest Inflatable Travel Pillow, NR-1, is a cervical pillow designed to provide comfortable support for the head and neck. This horseshoe shaped cushion is covered in a flocked material, deflates for transport or storage, and comes with a carrying case. DIMENSIONS: 12 x 6 inches.

Neck Yoke (Model N5001)

The Neck Yoke, model N5001, is a cervical pillow designed to support and correctly position the neck. This square block-style pillow has a neck cutout to provide extra-firm support. A cotton cover is included. DIMENSIONS: 8.5 x 14 x 16 inches. COLOR: The cover is light blue.

Neck-Huggar

Cervical support pillow. Designed in an "H" configuration with center cervical neck roll and two sidewings to improve neck/cervical alignment. Designed for use in a lounge chair, sofa, or car. Available in fiberfill or one-piece molded polyurethane foam. .

Nek-L-O Hot & Cold Pillow

The Neck-L-O Hot and Cold Pillow is a U-shaped pillow designed to provide cervical support and to administer hot/cold compression therapy to the neck and head. The pillow has a removable compress that is microwaveable. The pillow is filled with odorless, nonallergenic polyester fiber, and it is washable. COLORS: Assorted. Covers are available for $3.98.

Nekrol

The Nekrol is a cervical pillow designed for use by individuals with neck pain, disabilities, or injuries. This roll is designed to be postioned at the border of a standard pillow to provide support for the neck while enabling the head to be supported by the softer standard pillow. This roll pillow comes with a washable cotton cover. DIMENSIONS: 20 x 3 inches.

Neuropedic Electric Adjustable Bed

The Neuropedic Electric Adjustable Bed is a motorized bed designed for use by individuals with physical, respiratory, or digestive disabilities. Standard features include the patented Neuropedic Mattress with quilted cloth cover, dual three-speed massage, easy-touch control, headboard brackets, and illuminated hand control. SIZES: Twin extra-long, full extra-long, queen, or king (two twin beds). DIMENSIONS: The twin bed is 38 x 80 inches, the full bed is 53 x 80 inches, the queen bed is 60 x 80

Neuropedic Hi-Lo Split Frame Rehabilitation Bed & Neuropedic Hi-Lo 400 Split Frame Rehabilitation Bed

The Neuropedic Hi-Lo Split Frame Rehabilitation Bed and the Neuropedic Hi-Lo 400 Split Frame Rehabilitation Bed are motorized beds designed for use by individuals with physical, respiratory, circulatory, or digestive disabilities. Both models feature split-frame construction, are made of heavy-duty steel, and are equipped with Neuropedic’s patented Multi-Density Mattress with a fluid-proof cover. Standard features include six-way function, decorative headboard and footboard, and half side rails.

Neuropedic Multi-Density Patented Mattress

The Neuropedic Multi-Density Patented Mattress is a hospital mattress designed for a standard hospital bed. This antibacterial and anti-decubitus bed pad is for persons requiring orthopedic support and/or pressure sore prevention. The mattress comes standard with a waterproof cover. OPTIONS: Safety border and handles. DIMENSIONS: All sizes are 35 inches wide x 6 inches thick; lengths available in 77, 80, and 84 inches. Custom sizes are available.

Neuropedic Sleep Set

The Neuropedic Sleep Set is an orthopedic mattress set complete with mattress and foundation designed for use by individuals with lower back pain or at risk for decubitus ulcers. The set features the Neuropedic Multi-Density Mattress (see separate entry). OPTIONS: CC 2000 Series mattress; fluid-proof cover. SIZES: Twin, full, queen, king, and custom sizes.

Neutral Posture Chair - 6000 Series

The Neutral Posture Chair - 6000 Series is an adjustable office chair designed for use to provide back support while working at a desk. This chair has a high back with adjustable back height and angle and an inflatable lumbar pad. This chair features six seat size and contour options with adjustable seat height, depth, angle, and tension. It has adjustable arm height, width and 360-degree armpad rotation. The 6000 Series also has a plastic outer shell and a multi-function mechanism with seat sli

New Bed Controller

CUSTOM ADAPTATION PURPOSE: To provide a customized adaptation of a bed controller for a person with quadriplegia. Upon receiving a new bed this individual find the new bed controller difficult to use. A controller was adapted from original toggle-style switches and an old control box similar to the device previously used by this individual. The existing cable between the bed and the new controller was built into the controller therefore a new cable was needed for the adapted device. First a cab

New Life Mattress

The New Life Mattress is a pressure relief foam mattress designed for use by individuals at risk for pressure sores or ulcers. The two-layer foam mattress is covered with waterproof and vapor proof fabric with a firmer inner cavity that provides support to the shoulder and heel area. The mattress also features side handles and supportive edges that aid in transferring in and out of bed. The handles are positioned with reinforced stitching to the underside of the mattress to prevent accidental he

Noah's World Bed

The Noah's World Bed is an enclosed bed designed for use by children with autism or sleep disorders such as sleepwalking. This bed has a wooden box frame for a twin mattress and four 6-foot posts, one at each corner. A fabric ecnclosure is secured to the frame and posts, covering all four sides and the top. The enclosure has one or more zipper openings on that allows the child to be zipped in safely to prevent night wandering. During the day, the bed can also provide a contained play environme

Non-Slip Tray (Model Ha-4255)

The Non-Slip Tray, model HA-4255, is designed for use by individuals with balance, neurological, or upper extremity disabilities. This tray holds items without slippage at angles of up to 30 degrees. The tray is made with layers of wood veneer combined with synthetic resin to provide strength, with a non-slip coating which prevents items from sliding. DIMENSIONS: 360 x 280 millimeters. WEIGHT: 230 grams.

Norco Bed Pull-Up (Model Nc94302)

The Norco Bed Pull-up is a rope ladder designed to allow individuals with mobility disabilities to independently raise themselves to a sitting position while in bed. The loop webbing attaches to the end of the bed or bed frame, allowing the four loops to provide step-by-step pulling. A hook-and-loop keeps the attaching buckle secure. DIMENSIONS: The loop webbing is 40 inches long.

Nova Air Flotation System.

Alternating air pressure flotation mattress surface for prevention of decubitus ulcers. Features air flow to provide skin ventilation; box fitted end panels for attachment to hospital mattress; feature for uninterrupted air flow while patient is in any position; sleeved air hoses with positive locking system; concentric arc design for massaging action. Alternate sets of cells inflate and deflate twice each minute. Consists of power unit (14 by 11 by 9 inches) and Nova mattress (38 by 84 inches).

Oakham Chair (Model 700)

The Oakham Chair, model 700, is an adjustable chair designed for use by individuals with neck, shoulder, and back pain. This chair is completely height, seat depth, and back height adjustable. Features include a padded seat with built in lumbar support, padded armrests, and winged head support. The chair is mounted on a metal frame and covered in vinyl for easy cleaning. DIMENSIONS: Overall height is 1120 millimeters (mm) to 1250 mm. Width is 625 mm. Overall depth is 670 mm. Seat height is 430 t

Obus Forme

The OBUS Forme is a back support cushion designed to provide proper spinal support in any chair, auto seat, sofa, or bed. This support conforms to the natural contours of the spine to guide the back into a correct anatomical position, allowing it to relax. This posture eliminates lateral pressure on the spine to reduce fatigue and discomfort and to provide support for the upper rib cavity. The support is available in high- or low-back models and can be fitted with an optional lumbar pad for extr

Obus Supporting Roll

The OBUS Supporting Roll is a cylindrical pillow designed to provide support to either the lower back (lumbar area) or the neck (cervical area). This roll can be used in a chair or car seat. An elastic strap is included to hold the pillow in the desired position. The fabric cover can be removed and cleaned. DIMENSIONS: 12 inches wide, 4 inches in diameter. COLOR: Black, brown, burgundy, camel, grey, green, taupe, and two shades of blue.

Offset Trapeze (Model 7740)

Frame is 1 1/4 inch octagon steel tube, chrome plated. 5 foot rise and 34 inch reach. Offset design clears wall mounted fixtures above bed. Clamps fit any tubular or solid end beds. Fixed or swivel mount, and heavy duty models are available from manufacturer.

Olympic Vac Pacs

Olympic Vac Pacs are body positioners designed for use by individuals with physical disabilities.These products are patient positioning systems comprised of large rubberized vinyl bags filled with tiny plastic beads. The bags are soft and pliable until the air is drawn out through a special valve. Atmospheric pressure forces the beads into a solid mass conforming to the exact molded shape. Vac Pacs hold their shape for 24 to 48 hours and allowing air back in to the bag returns Vac Pacs to a soft

Original Mckenzie Cervical Roll (Model 703)

The McKenzie Cervical Roll, model 703, is a cervical pillow designed to provide support to the cervical lordosis while the user is sleeping on his/her side or back. The padded foam tube is placed between a soft, moldable pillow and pillowcase (not included). The roll is made of soft low-density foam and includes a removable, washable cotton/polyester cover.

Orthocare Anti-Rotation Device (Model 2046)

The Orthocare Anti-rotation Device ##2046 is a wedge shaped foot positioner that attaches to any Orthocare SPACEBOOT (see separate entry). The plate attaches to the footrest of the SPACEBOOT to allow controlled interior or exterior rotation of the hip and leg. Nylon thumb nuts lock the plate securely to the boot. NOTE: These plates are not sold independently; The Anti-rotation Device must be ordered when purchasing any style of SPACEBOOT.

Orthopedic Knee Pillow (Okp)

The Orthopedic Knee Pillow (OKP) is a body support pillow designed to ease pain caused by pregnancy, injury to hips or back, lower back syndrome, and general sleeping discomfort. Sleeping in the fetal position with the OKP causes the hips to flare, reducing pressure on both hips' capsule and sacroiliac joints. With this reduction of pressure, many lower back syndromes become less painful.

Orthopedic Pillow

The Orthopedic Pillow is a contoured pillow designed for use by individuals with spinal disabilities and allergies. This pillow has a raised outer edge and a concave center to support the natural curve of the spine while back or side sleeping. The allergy-free cover is impregnable to dust mites and other allergens.

Orthopod Chair

The Orthopod Chair is a high back posture chair designed with a back support system engineer for the human spine. This adjustable office chair features a free float and dynamic back that moves with the user; adjustable arms with 7 different height settings; a free float seat tilt that locks into any position; a totally adjustable strapping system for individual and precise back support comfort. The chair has a 5 point base with caster wheels. OPTIONS: The chair is also available with a mediu

Outta Bed

Outta Bed is a bed mobility aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. This device can be positioned for right- or left-side use and mounts primarily to the bed frame of a standard home flat bed as well as to the floor and wall for added stability. This device can be used to assist in transfers to and from bed and to and from a wa

Over The Bed Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Over the bed table which can be used for hobbies or building small items. Wood table with edges on three sides. Provides a list of the pieces of wood needed and includes a diagram of how the table is put together. Exact size depends on the height of the bed and the person seated in it in a working position, and the width of the bed. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Aids for Elderly People REF: London, England: Souveni

Over-Chair Table

CUSTOM ADAPTATION PURPOSE: To enable an individual with Parkinson's disease to engage in a variety of activities while seated in his recliner. The customized table has a large plywood base that fits under the chair and is held in place by the weight of the chair. The chair's castors slot into small holes in the base, holding both the chair and the table completely stable. A post with a spring-loaded carriage that moves up and down from a gym set was mounted to the base. The table support was br

Overbed Table

The Overbed Table is designed to provide eating and work space for individuals who are in bed for extended periods or who use wheelchairs. This height-adjustable table has an open frame base to slide under the bed or for wheelchair accessibility. The table has a wipe-clean laminate top with a built-in cup holder, and a C-frame base with four swivel casters. It can be converted for either right-hand or left-hand use. DIMENSIONS: The height adjusts from 28.25 to 42.25 inches. The table surface is

Overbed Table (Model 1010C)

Model 1010C is an overbed table with a laminated top, steel frame, and 1.5-inch ball bearing casters. Table height is automatically adjustable from 28 to 45 inches. The adjustment mechanism is spring-loaded to lift with slight upward pressure. A release lever will adjust the table height downward. Supports up to 50 pounds. Brakes are an available option. DIMENSIONS: Top surface is 15 x 30 inches.

Overbed Table (Model 1050)

Model 1050 is a tilt-top overbed table with a laminated top, chrome plated steel frame, and 1.5-inch hooded ball casters. The top surface tilts in both directions to maximum of 22 degrees for food service, reading, and craft work. DIMENSIONS: Top is 15 x 30 inches; height adjusts from 29 to 44 inches.

Overbed Table (Model 925)

Model 925 is a tilt-top overbed table with a laminated top, chrome plated steel frame, and 1.5-inch hooded ball casters. The top tilts to 22 degrees in either direction for food service, reading, and craft work. DIMENSIONS: Top surface is 15 x 24 inches, height is adjustable from 25.5 to 39 inches.

Overbed Table (Models 3000 & 4000)

Model 3000 and Model 4000 are overbed tables. Each has a laminated top, steel frame, and 1.5-inch ball bearing casters. Model 3000 has semi-automatic height adjustment from 30 to 45 inches; Model 4000 has fully automatic height adjustment. A spring-loaded positioning lever allows the table to be positioned in any of 16 slots with 1-inch increments. The tables will support up to 100 pounds. DIMENSIONS: Top surface is 15 x 30 inches.

Oversized Lift Chair (Model 70539)

The Oversized Lift Chair, model 70539, is a bariatric seat lift chair designed for use by individuals with mobility disabilities. This three-position chair has two motors and a heavy-duty scissor lift mechanism. Other features include a single-switch hand control and built in emergency battery back-up, allowing the chair to return to the sitting position in the event of a power outage. POWER: Uses household current. The backup uses 9-volt batteries (not included). DIMENSIONS (LxW): The chair is

Passport Series Cabinets

Passport Series Cabinets are accessible cabinets for the home office and kitchen designed for use by wheelchair users and individuals of short stature. This universal design series combines traditional cabinetry with features such as low countertops and drawers.

Pc Task Chairs

PC Task Chairs are adjustable height, tilt in space office chairs designed to correct for any user's size, support requirements, and working conditions. This ergonomically adjustable chair has 8 separate adjustments. The chair raises and lowers pneumatically. The seat has a forward 6 degree negative tilt and a 12 degree back tilt, and locks at any angle forward through back. The back rest tilts forward and back from 77 through 119 degrees and also locks at any angle. The back adjusts up and down

Peach Pillow & Peach Blossom

The Peach Pillow and Peach Blossom are cervical pillows designed for provide orthopedic support to relieve pain associated with upper back and neck problems, arthritis, or tension headaches. These pillows have built-in rolls to provide support under the user's neck. Both are made with poly foam and holofil. The Peach Blossom Pillow is the same internally as the Peach Pillow except that the rolls are wrapped with memory foam. SIZES: Queen or Travel. DIMENSIONS (LxW): 16 x 23 inches. WARRANTY: 1-y

Peanut Cushion.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Bolster cushion with narrowed center section for use by persons with limited head control; keeps the neck slightly flexed and prevents the head from falling to the side. Describes two ways of constructing a peanut cushion: making a fabric cover and filling it with crushed foam or polystyrene balls; or wrapping tape around the center part of a bar of foam and covering as desired. Includes drawings. SKILLS REQUIRED: Sewing. Assembly. AUTHOR: Hartrick, J

Pedal Chair

The Pedal Chair is a geriatric chair designed for use by individuals who need support while sitting. Features include seat tilt infinitely adjustable up to 18 degrees; armrests with independent height adjustment within a range of 4 inches; a height-adjustable seat; four casters, including two fixed casters with brakes; and padded neckrest cushion and lower side pads. OPTIONS: 20-inch front or rear mounted mag style wheels. DIMENSIONS (LxW): Seat is 17 x 18 or 20 inches. The floor-to-seat height

Pedi Crib Bed

The Pedi Crib Bed and Top are designed to prevent a child from crawling out. It has standard round rails on the sides. OPTIONS: Extended stainless rails and a bubble top are available. Inhalation tents also available to fit over the entire crib. SIZE: Available in 2 sizes.

Pediatric Adjustable Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Table which can be folded against the wall and can be adjusted in height from 18 1/2 to 32 1/2 inches so it can be used by children and adults. Describes hinged table which moves up and down a track on a backboard on the wall. The table can be adjusted by one person. Includes a drawing and photographs. SKILLS REQUIRED: Woodworking. AUTHOR: Rousseau, Y TITLE: Pediatric Adjustable Table JOURNAL: Canadian Journal of Occupational Therapy REF: Vol 51 no 3,

Pediatric Ball Chair (Model Ap 400)

The Pediatric Ball Chair is a posture chair designed for use by children with physical or neurological disabilities. This chair is designed to promote dynamic active sitting to strengthen a child's back and help his/her posture. The chair consists of a frame, with a back rest, that holds a therapy ball as the seat of the chair. The latex-free ball can be inflated to different sizes to accommodate the child. The frame has non-locking casters for mobility, and the four legs are height adjustable.

Pedirest

The PediRest is a footstool designed for use by individuals with lower extremity and back disabilities. This wood footstool features two height settings and an angled slatted wood top.

Penta Pillow

The Penta Pillow is a body positioner designed for use by individuals with upper or lower extremity disabilities. This pillow has five sections, each filled with polyester and covered with cotton/polyester ticking, to form a trough to elevate and protect the arm, leg, or shoulder. This machine-washable pillow can also be used as a wedge to prevent rolling out of bed, to elevate bedding off the feet, or to provide abdominal support for pregnant women. DIMENSIONS (LxW): 20 x 8 inches. WEIGHT: 1.13

Personal Work Table With Tilt Top (Model 76-31K)

The Personal Work Table with Tilt Top, model 76-31K, is a height-adjustable tilt top work table designed for use by individuals who use wheelchairs. The top tilts from 0 to 50 degrees and is equipped with a lip on the front edge to keep objects in place. The legs are adjustable with an indexing plunger. OPTION: 3.5-inch locking dual-wheel casters. DIMENSIONS (HxLxW): 23 to 33 x 36 x 30 inches.

Petite Recliner Lift Chair (Model 70559)

The Petite Recliner Lift Chair, model 70559, is a seat lift chair designed for use by individuals with mobility disabilities or lower extremity disabilities who need assistance rising from a chair. This three-position lift/recliner chair has a continuous seat-to-ottoman chaise pad that completely supports the user's legs. The chair has a single electric motor with a built-in emergency battery back-up that allows the chair to return to the sitting position in the event of a power outage. POWER: U

Phillips Respironics Heated Hose Adaptor For Soclean

The Philips Respironics Heated Hose Adapter for the SoClean is designed for use by individuals that have a respiratory disability or condition, so that those individuals may clean the hose of a Continuous Positive Air Pressure or CPAP machine more easily. Compatible with all SoClean models of CPAP machines. Connects a Philips Respironics heated hose and connects to the SoClean in order to sanitize the hose. Includes: 1 Philips Respironics Heated Hose Adapter. Due to hygiene purposes, this item i

Phillips Respironics Heated Hose Adaptor For Soclean

The Philips Respironics Heated Hose Adapter for the SoClean is designed for use by individuals that have a respiratory disability or condition, so that those individuals may clean the hose of a Continuous Positive Air Pressure machine more easily. Compatible with all SoClean models. Connects a Philips Respironics heated hose to connect to the SoClean to sanitize their hose. Includes: 1 Philips Respironics Heated Hose Adapter. Due to hygiene purposes, this item is non-returnable. Shipping and Han

Physio-Roll

The Physio-Roll is a peanut-shaped inflatable roll designed to provide control and security for individuals with physical disabilities during balance activities. With a saddle-shaped middle, the roll cradles the user and the overall shape limits rotation to forward and backward. Used with or without a blanket, the roll can be used in squeeze play and tactile activities. DIMENSIONS: 12, 16, 22, 28, or 34 inches in diameter. CAPACITY: Up to 250 pounds depending on size. COLOR: Red, yellow, or blue

Physio-Roll Outrigger Ball

The Physio-Roll Outrigger Ball is a peanut-shaped inflatable roll designed to provide control and security for individuals with physical disabilities during balance activities. With a saddle-shaped middle, the roll cradles the user and the overall shape limits rotation to forward and backward. Used with or without a blanket, the roll can be used in squeeze play and tactile activities. DIMENSIONS: Available in 16-, 21.75-, and 27-inch heights. COLOR: Assorted.

Picnic Tables (Wct8 Series)

Accessible picnic table. Tubular galvanized steel frame. Wooden or anodized aluminum top and seats. Tabletop extends out 12 inches on each end. DIMENSIONS: 8 feet x 4 feet 9 inches x 31 inches high. WEIGHT: 184 pounds.

Picture Frame Restoration Workstation

DO IT YOURSELF ENTRYPURPOSE: To enable individuals with spinal cord injury or severe physical disabilities to restore picture frames without bending or lifting. The custom-designed workstation consists of a worktable that includes a separate revolving grid that provides an indexed tilting mechanism and 350-degree rotation. This provides the user full appropriate positioning of the frame without the need to bend over the table or lift. The table accommodates a standing worker and a height-adjust

Pillo-Perfect

The Pillo-Perfect is a zipped cover that slips onto a conventional pillow converting it into a cervical pillow for contoured head and back support. It can be used for either back-lying or side-lying. The pillowcase has a removable comfort roll for lumbar or cervical support. Available for regular, queen and king-sized pillows. Travel covers are available for $3.98 in navy, brown, and gray.

Pillow Perfect Cervical Roll

The Pillow Perfect Cervical Roll is a cervical pillow designed for use individuals with neck pain or disabilities. This cylindrical roll pillow is filled with polyester fiber and fits under the neck. DIMENSIONS: 17 x 7 inches.

Pillow Perfect Double Support

The Pillow Perfect Double Support is a pillow designed for individuals with neck pain or disabilities. These pillows are made of non-combustible foam and provide neck support for those who sleep on their backs with raised rounded edges at the top and bottom. The pillow is available in a choice of medium/firm or firm/extra firm. DIMENSIONS: 22 x 16 inches.

Pillow Perfect Hot / Cold Cervical Support

The Pillow Perfect Hot/Cold Cervical Support is a combination cervical pillow and hot or cold pack designed for use by individuals with neck pain or disaqbilities. This C-shaped support is filled with polyester fiber and features a pocket to hold the included compress that may be heated or chilled. DIMENSIONS: The pillow is 17 x 11.5 inches and the compress is 5 x 6 inches.

Pillow Perfect Pillow

The Pillow Perfect Pillow is designed for individuals with neck pain or disabilities. These pillows have recessed centers and raised edges to provide cervical support in any position.The standard, gentle, mid-size, and petite models are filled with Fortrel fiber and the econo model is filled with 100 percent polyester. DIMENSIONS: The standard, gentle, and econo models are 24 x 16 inches. The petite model is 19 x 12 inches. The mid-size model is 22 x 15 inches.

Pillow Perfect Traveler

The Pillow Perfect Traveler is a contoured pillow designed for use individuals with neck pain or disabilities. This U-shaped pillow is filled with polyester fiber and fits around the neck. DIMENSIONS: 18 x 9 inches.

Pillow Protector (Model 6179)

The Pillow Protector, model 6179, is designed to protect pillows from moisture. The protector is made from plasticized rayon tricot with a rustproof zipper. It is flameproof, hypoallergenic and machine washable. SIZE: Standard bed pillow.

Pillow Protector (Models 8041, 8042, 8042K, & 8050)

The Pillow Protector, models 8041, 8042, 8042K, 8050, is designed to protect pillows from moisture. These machine washable protectors are flameproof, waterproof, hypo-allergenic and have a rustproof zipper. OPTIONS: Plasticized nylon tricot or vinyl; disposable plastic protectors available in units of 1 dozen (8050). DIMENSIONS: plasticized nylon, 21 x 27 inches (8042) or 21 x 39 inches (8042K). No dimensions available for vinyl (8041).

Pillow Pump Alternating Pressure System

Mattress surface with alternating air pressure to provide pressure relief. Pad is covered with diamond shaped air pockets which inflate and deflate with the pump action. The pad can be used on most beds, dimensions not provided but picture shows it on a hospital type bed with 24 inch end flaps to keep it in place. The elctric pump attaches to the end of the bed and cycles every 2 mintues. Light on pump indicates pump is in use.

Pillowcase

The Pillowcase is a pillow protector designed for use by individuals who have disabilities which cause drooling. This standard-size pillowcase is 100 percent cotton and lined with breathable, waterproof barrier cloth. COLOR: White.

Pincare Gel Mattress

The PinCare Gel Mattress is a gel flotation mattress designed for individuals with back pain and those who are at risk for pressure ulcers. This mattress combines the softness of foam with the effectiveness of gel in distributing weight and pressure over a larger area. The mattress consists of the PinCare Pad, a soft foam overlay of small finger-like projections; a gel-foam core; and a layer of polyurethane foam. The mattress ticking is two-way stretch polyester cotton damask and the bottom cove

Pincare Gel Mattress For Hospital Beds

The PinCare Gel Mattress for Hospital Beds is a gel flotation mattress designed for individuals with back pain and those who are at risk for pressure ulcers. This mattress combines the softness of foam with the effectiveness of gel in distributing weight and pressure over a larger area. The mattress consists of the PinCare Pad, a soft foam overlay of small finger-like projections; a gel-foam core; and a layer of polyurethane foam. This mattress is covered in a Staph-Chek Fusion Fabric Cover. Thi

Pincare Gel Overlay For Hospital Beds

The PinCare Gel Mattress Overlay for Hospital Beds is a gel flotation mattress surface designed for individuals with back pain and those who are at risk for pressure ulcers. This overlay combines the softness of foam with the effectiveness of gel in distributing weight and pressure over a larger area. The mattress consists of the PinCare Pad, a soft foam overlay of small finger-like projections; a gel-foam core; and a layer of polyurethane foam. This overlay is covered in a Staph-Chek Fusion Fab

Pincare Gel Sleep System

The PinCare Gel Sleep System is a gel flotation mattress designed for individuals with back pain and those who are at risk for pressure ulcers. This system combines the softness of foam with the effectiveness of gel in distributing weight and pressure over a larger area. The set comprises the PinCare Gel Mattress and the foundation. The mattress consists of the PinCare Pad, a soft foam overlay of small finger-like projections; a gel-foam core; and a layer of polyurethane foam. The mattress ticki

Pincare Pad

The Pincare Pad is a foam mattress surface designed for use on hospital beds to provide mild pressure reduction. Designed to be placed on top of the existing mattress, this foam overlay has small finger-like projections to provide pressure reduction.

Play Tray.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Tray to protect table top or floor while child plays. Plywood tray 12 by 24 inches with 2 inch edging around 3 sides, and strips cut from a cork tile glued on the underside. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Toys for Your Handicapped Child REF: London, England: Souvenir Press: p 158-159. Also available from Prentice-Hall, Englewoods Cliffs, NJ. NARIC CALL NUMBER: R3463 PAGES (including cover): 2 1983.

Plaza Pedastal Square Picnic Table - Wheelchair Accessible (Models T46Rcped-3S & T46Rcped-3Sm)

The Plaza Pedestal Square Picnic Table - Wheelchair Accessibleis a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This table has seats on three sides with space for a wheelchair on the fourth side. It has a one-piece powder-coated steel frame, with table tops and seats made of plastic-coated steel. The table top has a hole for an umbrella. Model T46PED-3S is designed for in-ground mounting, and model T46PED-3SM is designed for surface mo

Plaza Square Picnic Table - Wheelchair Accessible (Model T46Rcpedpor3)

The Plaza Square Picnic Table - Wheelchair Accessible, model T46RCPEDPOR3, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This portable table has three seats, with space for a wheelchair on the fourth side. It has a one-piece powder-coated steel frame with a plastic-coated steel table top and seats. The table top features an umbrella hole. DIMENSIONS (HxLxW): The table top is 31 x 46 x 46 inches. The seats are 18 x 38 x 10.5 inches.

Pneumatic Roller Seat

DO-IT-YOURSELF-ENTRY --- PURPOSE: To provide independent mobility and exercise away from a wheelchair for a child with muscular dystrophy. A low, backless stool with a padded seat can be adjusted to the proper height to enable the child to propel the stool with his/her feet. The caster wheels should move easily over hardwood or carpet and the seat should swivel 360 degrees. MATERIALS: Low wheeled stool. TITLE: Doing It Yourself. JOURNAL: Quest. REF: Volume 12, Number 1, January/February 2005. WE

Polyester Bed Pads (Models D2001, D2002, D2003, & D2004)

The Polyester Bed Pads are decubitus pads designed for use by individuals with or at risk for pressure sores or ulcers. Made of Kodel polyester, these pads are soft and resillient and non-allergenic. The pads are machine washable and dryable. DIMENSIONS: Model D2001 is 24 x 30 inches, model D2002 is 30 x 40 inches, model D2003 is 30 x 60 inches, and model D2004 is 36 x 72 inches.

Portable Achievement Carrel (Model 903A)

The Portable Achievement Carrel, model 903A, is a desktop study carrel designed for use by children with communication, learning, or behavior disabilities. This portable carrel creates a semi-private tabletop space to help students concentrate on their work by controlling their surroundings, including the visual environment, light, and sound. The carrel has a back panel and two side panels with optional windows, an angled work surface with an 18-degree slope, a reading easel with a dry erase sur

Portable Chair

CUSTOM ADAPTATION PURPOSE: To provide a chair with a seat high enough for a user with mobility disabilities and upper extremity weakness to rise from that the user could transport to doctor appointment and other outings. A folding aluminum director's chair was purchased and aluminum tubing in the same dimensions as that of the chair frame was used to create extensions for the chair's legs. Internasl sleeves were inserted in the tubing and epoxy glue and pins were used to ensure strength. Alumin

Portable Changing Table For Older Children

CUSTOM ADAPTATIONPURPOSE: To provide a changing table for children ages 5 to 9 with incontinence who are too big for a regular changing table. The table base is a rectangular piece of medium-density fiberboard, 145 centimeters (cm) X 75 cm. Four pieces 19 millimeter (mm) plywood, 12 cm high, are attached to the edges of the table base to form a box into which a vinyl covered 70 mm foam mattress is placed. Collapsible legs, 85 cm high, are attached to the bottom of the table base. 10 cm leg exten

Portable Easy Up

The Portable Easy Up, models 1220 and 1221, is a foam seat lift cushion designed to assist individuals to stand up from a seated position. The cushion adds 3 to 4 inches to the height of any chair seat, and acts to position the hips and knees at 90 degrees to make it easier to rise. The cushion comes with a carry strap and a machine washable fabric cover with zipper closure. DIMENSIONS: 15 x 15 x 3 inches (model 1220, $29.95) or 15 x 15 x 4 inches (model 1221, $36). WEIGHT: Under 1 pound. COLOR:

Portable Folding Bed Board (Model 6009)

The Portable Folding Bed Board, model 6009, is designed to make mattresses firmer. The board folds into four 15-inch sections for easy handling. The unit is made of 7-ply Aircel Board with linen finish. DIMENSIONS: 5 feet long x 30 inches wide x 1/2 inch thick. SIZE: Twin.

Posey Comfort Pad (Models 6324, 6340 & 6360)

The Posey Comfort Pad, models 6324, 6340 and 6360, is a decubitus pad designed for use by individuals at risk for pressure sores. This decubitus pad is made of synthetic fur and is machine washable. Standard or lightweight available. DIMENSIONS: 24 x 30 inches (model 6324); 30 x 40 inches (6340); 30 x 60 inches (6360).

Posey Pressure-Relief Positioning Roll (Models 6304, 6304Sc, 6305, & 6305Sc)

The Posey Pressure-Relief Positioning Roll is a body positioners designed for use by individuals at risk for pressure sores or who require positioning assistance while seated or in bed. The roll provides full body support in lateral or dorsal positioning, and its flexible construction conforms to the user's body, reducing pressure. The role has a strap to secure it to a bed, chair or wheelchair. The straps can also be used to tie one roll to another. Models 6304 and 6304SC are high density for m

Posey Soft Split Side Rail Protectors (Models 5705 & 5705Ls)

The Posey Soft Split Side Rail Protectors, models 5705 and 5705LS, are side rail pads designed to provide protection from injury from bed side rails. These pads provide protection and can be used to close the gap between the half rails to deter users from exiting the bed between the rails. These foam pads are covered in wipe-clean vinyl and secure to most rails with the attached hook and loop straps. Available in an open bar side rail design (model 5705) and encapsulated side rail design (5705LS

Positioner Foam Blocks: Basal Block (Model 9-101)

The Basal Block, no. 9-101, is a wedge pillow and head positioner made of foam from the Alimed Positioner Foam Blocks series. The cushion is designed to support the back and shoulders with a contoured cutout for the head and neck in extensor thrust position. DIMENSIONS: 16 x 12 inches, tapers from 7 inches at 27 degrees.

Positioner Foam Blocks: Neck / Head Rest (Model 9-021)

The Neck/Head Rest, no. 9-021, of the Alimed Positioner Foam Block series, is a foam wedge pillow designed to support the back and shoulders with a U-shaped neck support. DIMENSIONS: 12 x 10 x 6.5 inches.

Positioner Foam Blocks: Torso Block (Model 9-100)

The Torso Block, no. 9-100, is part of the Alimed Positioner Foam Blocks series. This foam wedge cushion is designed to support the back at a 27 degree angle. DIMENSIONS: 12 x 16 inches with a 7-inch high rounded top.

Positioning Chair

CUSTOM ADAPTATION PURPOSE: To provide proper positioning for a child with neurological disabilities. An existing Sebel Hobnob Junior Chair was modified to meet the child's specific needs. A height-adjustable footrest that slides out from under the seat was added. The chair was also equipped with glides on the legs for easier movement, and ant-tips were added to the rear legs. For more precise support, a removable lateral plywood insert was added to the seat. The insert was removable when the ch

Positioning Roll

The Positioning Roll is a roll cushion designed to relieve pressure on the head and neck when placed under the neck. DIMENSIONS (LxD): 17 x 5 inches or 12 x 5 inches.

Positioning Table

CUSTOM ADAPTATION PURPOSE: To provide proper positioning for a child with neurological disabilities. This table is designed to provide the child with proper postural positioning while allowing the child to concentrate on eating, playing, or educational activities while at the table. The table was made of plywood to dimensions specified by the child's therapist and provides space for two children. The table is height adjustable and has a torso cutout at one end to provide the child with close ac

Positioning Wedges (Models 554010 & 554020)

The Positioning Wedges are body positioners designed to promote proper hip and spine alignment for people with back and lower extremity disabilities. These foam wedges also reduce sacral pressure to prevent or aid in healing pressure sores. Model 554010 comes with a cloth cover and model 554020 comes without a cover. DIMENSIONS: The wedges are 8 x 8 x 17 inches.

Posture-Flow Adjustable Sleep Systems

Both Posture Flow I and II models have fully upholstered innerspring mattresses and box springs, and come with electric hand control for adjustment of head and foot sections. Head section moves up to 60 degrees. Each bed has two electric gear motors, which are UL listed and CSA certified. Fully riveted frame of 2 inch by 1 3/8 inch rail steel, with steel hinges and bushings at all pivot points. Bed platforms up to Queen size are of 5/8 inch particle board, Queen is of plywood.Legs are 1/8 inch s

Powered Armchair Modification

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted armchair for an adult with Charcot Marie Tooth Disease, a disease similar to Muscular Dystrophy, which causes muscle weakness and foot drop, making it difficult to walk. The individual had used a powered lounge chair to watch television. The chair had a remote control which tilted the chair at an angle that would lift the individual forward and hold him into an almost standing position to help him transfer to his walker and

Powered Elevated Chair

CUSTOM ADAPTATION -- PURPOSE: To provide a customized lifting chair for an individual with mobility disabilities that can be easily moved throughout a residential setting, including going through doorways. The chair has a U-shaped base made of rectangular hollow steel with a vertical post at the back, and large casters on the front ends of the U and smaller ones at the back. There are also larger bike-type wheels on either side which can be used to propel the chair if necessary. Additionally, th

Powered Kitchen Stool

CUSTOM ADAPTATION PURPOSE: To enable an individual with short stature and paralysis of the legs to access counters and the stovetop for cooking. Because the user lacked mobility, she had used a standard kitchen stool fitted with casters, but that proved unsafe. A custom stool was created with a frame of welded rectangular hollow steel. The stool was equipped with an electrolinear actuator that raises and lowers the seat. The actuator is an electric motor with a worm reducer that drives a vertic

Precast Concrete Round Table - Wheelchair Accessible (Model Rotsh)

The Precast Concrete Round Table - Wheelchair Accessible, model ROTSH, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This round table has three seats with space for a wheelchair on the fourth side. It is made of steel-reinforced concrete with a smooth base and a polished table top and seats. OPTIONS: Umbrella hole. DIMENSIONS: The table is 30 inches high with an outside diameter of 56 inches. The table top diameter is 38 inches. Th

Preemie / Bassinet Acid Reflux (Ar) Pillow

The Preemie/Bassinet Acid Reflux Pillow is a wedge pillow designed for use with babies with gastric reflux or eating and digestive disabilities. This pillow includes a quilted poly/cotton harness and head ring to hold a newborn safely and maintain a 30-Degree angle, the optimal angle to relieve acid reflux, gastroesophageal reflux, Barrett's Syndrome, post surgical conditions, etc. naturally. The head ring is attached under the cotton pillow sheet with Velcro to the pillow surface. The quilted p

Prem Aclave Pillow Protector

The Prem Aclave Pillow Protector is a pillow protector designed to protect pillows from damage. The protector is made of heavy duty vinyl, and it is waterproof, flame retardant, washable, and non-allergenic. The protector is available in zippered or Slip-n-Tuck styles.

Prem-Aclave Draw Sheet

Prem-Aclave Draw sheets are waterproof sheets designed for mattress protection. The sheets are constructed of heavy duty vinyl, have bound ends or muslin ends, and are non-allergenic, flame retardant, and washable. The sheets are available in contour or zippered styles. DIMENSIONS: The sheets are available in three sizes: 36 x 66 inches, 36 x 72 inches, and 48 x 72 inches.

Prem-Aclave Mattress Protector

The Prem-Aclave Mattress protector is a mattress protector designed to protect mattresses from damage. The protectors are constructed of heavy duty vinyl with elastic corners, and are available in crib, bunk, single, hospital, 3/4, double, queen, and king sizes. All sizes are available in contour and zippered styles, and are flame retardant, washable, waterproof, and non-allergenic.

Premium Guard 3-Inch Gel / Foam Overlay (Model 14893)

The Premium Guard 3-inch Gel/Foam Overlay, model 14893, is a gel and foam mattress overlay designed for use by individuals at risk for developing decubitis ulcers/pressure sores. This overlay has four gel bladders, a high-density foam shell and support base, a convoluted high- density polyurethane foam topper, and a urethane-coated nylon cover, designated head and foot sections, and elastic corner straps to secure the overlay to the mattress. DIMENSIONS (HxLxW): 3 x 72 x 34 inches. WARRANTY: One

Premium Guard Deluxe Static Air Mattress Overlay (Model 14425)

The Premium Guard Deluxe Static Air Mattress Overlay, model 14425, is an air flotation mattress surface designed for use by individuals at risk for pressure sores/decubitis ulcers. Four heavy-duty, elastic bed straps prevent the overlay from moving. OPTIONS: Manual pump (model 14426) or electric pump (model 14427). DIMENSIONS: 3 x 72 x 35 inches. WEIGHT: 6 pounds.

Premium Guard Water Mattress (Model 14400)

The Premium Guard Water Mattress, model 14400, is a water flotation mattress designed for use by individuals at risk for pressure sores/decubitis ulcers. Three water baffles enhance movement and support to reduce pressure and conform to varying body weights. OPTIONS: Fill hose (model 14401). DIMENSIONS: 3 x 72 x 34 inches. WEIGHT: 45 pounds.

Premium Waterproof Sheet Protector (Modelp13605)

The Premium Waterproof Sheet Protector, model P13605, is a waterproof sheet designed for use by individuals with incontinence. The mattress features a polyester surface, and polyester/ rayon vinyl backing. The polyester fabric sheet keeps fluids away from the surface of the mattress leaving a comfortable and ultra dry surface. SIZE: Twin. COLOR: Mint.

Pressure Care Assistant

The Pressure Care Assistant is a decubitus pad designed for use by individuals at risk for pressure sores/ulcers. Made of Australian HiTemp UR Medical Sheepskin, this strip is used at the base of the bed to prevent heel pressure sores. The strip has side flaps that wrap around the mattress to keep it in place. This pad provides protection while maintaining freedom of foot movement. DIMENSIONS (WxL): 12 X 26 inches.

Pressureguard Apm

The PressureGuard APM is a foam and air flotation mattress designed for use by individuals with pressure ulcers. The system includes the mattress, air lines, and one air pump. Every five minutes, the system reverses inflation within each of the four fabric-reinforced longitudinal air cylinders. The integrated bolsters, Geo-Matt Topper and cylinders enhance comfort and protection. POWER: Standard electrical current. OPTIONS: Fitted coverlet and transport bags. DIMENSIONS: 35 x 84 x 7 inches or 35

Pressureguard Cft

The PressureGuard CFT is a foam and air flotation mattress designed for use by individuals with pressure ulcers. This mattress' patented constant force technology (CFT) automatically adjusts the mattress' interconnected network of air cylinders and elasticized reservoirs to the appropriate therapeutic level for the user, regardless of weight or position on the mattress. OPTIONS: Air System Renewal Kit. DIMENSIONS: 35 x 84 x 7 inches, 35 x 80 x 7 inches, 35 x 75 x 7 inches, or 32 x 80 x 7 inches

Pressureguard Renew

The PressureGuard RENEW is a foam and air flotation mattress designed for use by individuals with pressure ulcers. This mattress features pressure-distributing cylinders and the Geo-Matt (see also separate entries) toppers and combines the benefits of air displacement with surface stability. Occasional air system renewal through quick-connect hoses enables the mattress to retain support throughout the life of the mattress. OPTIONS: Air System Renewal Kit. DIMENSIONS: 35 x 84 x 7 inches, 35 x 80

Pressureguard Turn Select

The PressureGuard Turn Select is a foam and air flotation mattress designed for use by individuals with pressure ulcers. This system slowly and gently turns the user at angles up to 30 degrees at programmable intervals from one minute to two hours. This matress features a microprocessor controlled motion system integrated directly into the mattress. A hand-held pendant control enables programming of the system's operating modes and the system can accept a standard turning program or a fully cust

Pride Classic 2-Position Partial Recline Lift Chair (Model Cl-10)

The Pride Classic 2-Position Partial Recline Lift Chair, model CL-10 is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a

Pride Classic 2-Position Partial Recline Lift Chair (Model Cl-20)

The Pride Classic 2-Position Partial Recline Lift Chair, model CL-20 is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a

Pride Classic 3-Position Full Recline Chaise Lounger (Model Cl-30)

The Pride Classic 3-Position Full Recline Chaise Lounger, model CL-30, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a c

Pride Classic 3-Position Full Recline Lift Chair (Model Cl-15)

The Pride Classic 3-Position Full Recline Lift Chair, model CL-15, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord.

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-450)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-450, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both recline and lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. T

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-550L)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-550L, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. B

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-550M)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-550M, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. B

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-550S)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-550S, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. B

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-585)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-585, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both recline and lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. T

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-590)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-590, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both recline and lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. T

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-595)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-595, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Bo

Pride Elegance 3-Position Full Recline Large Chaise Lounger (Model Lc-570L)

The Pride Elegance 3-Position Full Recline Large Chaise Lounger, model LC-570L, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitt

Pride Elegance 3-Position Full Recline Medium Chaise Lounger (Model Lc-570M)

The Pride Elegance 3-Position Full Recline Medium Chaise Lounger, model LC-570M, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sit

Pride Elegance 3-Position Full Recline Petite Chaise Lounger (Model Lc-570P)

The Pride Elegance 3-Position Full Recline Petite Chaise Lounger, model LC-570P, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sit

Pride Elegance 3-Position Full Recline Petite Wide Chaise Lounger (Model Lc-570Pw)

The Pride Elegance 3-Position Full Recline Petite Wide Chaise Lounger, model LC-570PW, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing a

Pride Elegance 3-Position Full Recline Small Chaise Lounger (Model Lc-570S)

The Pride Elegance 3-Position Full Recline Small Chaise Lounger, model LC-570S, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitt

Pride Elegance 3-Position Full Recline Wide Chaise Lounger (Model Lc-570W)

The Pride Elegance 3-Position Full Recline Wide Chaise Lounger, model LC-570W, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitti

Pride Heritage 2-Position Partial Recline Chaise Lounger (Model Gl-358Xxl)

The Pride Heritage 2-Position Partial Recline Lift Chair, model GL-358XXL, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair

Pride Heritage 2-Position Partial Recline Lift Chair (Model Gl-58)

The Pride Heritage 2-Position Partial Recline Lift Chair, model GL-58, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by

Pride Heritage 3-Position Full Recline Heavy-Duty Chaise Lounger (Model Gl-358Xl)

The Pride Heritage 3-Position Full Recline Heavy-duty Chaise Lounger, model GL-358XL, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to t

Pride Heritage 3-Position Full Recline Large Chaise Lounger (Model Gl-358L)

The Pride Heritage 3-Position Full Recline Large Chaise Lounger, model GL-358L, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the cha

Pride Heritage 3-Position Full Recline Medium Chaise Lounger (Model Gl-358M)

The Pride Heritage 3-Position Full Recline Medium Chaise Lounger, model GL-358M, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the ch

Pride Heritage 3-Position Full Recline Petite Chaise Lounger (Model Gl-358P)

The Pride Heritage 3-Position Full Recline Petite Chaise Lounger, model GL-358P, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the ch

Pride Heritage 3-Position Full Recline Petite Wide Chaise Lounger (Model Gl-358Pw)

The Pride Heritage 3-Position Full Recline Petite Wide Chaise Lounger, model GL-358PW, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to

Pride Heritage 3-Position Full Recline Small Chaise Lounger (Model Gl-358S)

The Pride Heritage 3-Position Full Recline Small Chaise Lounger, model GL-358S, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the cha

Pride Media Chair (Model Lc-900)

The Pride Media Chair, model LC-900, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift

Pride Specialty 2-Position Partial Recline Wall Hugger Chaise Lounger (Model Ll-805)

The Pride Specialty 2-Position Partial Recline Wall Hugger Chaise Lounger, model LL-805, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connecte

Pride Specialty 3-Position Chaise Lounger (Model Lc-102)

The Pride Specialty 3-Position Chaise Lounger, model LC-102, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. This model chair differs from most other Pride lift chair models in that it is constructed with an overall smaller frame. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Bot

Pride Specialty 3-Position Full Recline (Model Gl-310)

The Pride Specialty 3-Position Full Recline Lift Chair, model GL-310, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a co

Pride Specialty 3-Position Full Recline Chaise Lounger (Model Lc-105)

The Pride Specialty 3-Position Full Recline Chaise Lounger, model LC-105, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by

Pride Specialty 3-Position Full Recline Chaise Lounger With Flip-Open Arms (Model Ll-571)

The Pride Specialty 3-Position Full Recline Chase Lounger with Flip-open Arms, model LL-571, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connect

Pride Specialty 3-Position Full Recline Chaise Lounger With Footrest Extension (Model Ll-575)

The Pride Specialty 3-Position Full Recline Chase Lounger with Footrest Extension, model LL-575, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control con

Pride Specialty 3-Position Full Recline Chaise Lounger With Transfer Arms (Model Ll-570T)

The Pride Specialty 3-Position Full Recline Chase Lounger with Transfer Arms, model LL-570T, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connect

Pride Specialty Infinite Position Sleep Full Recline Chaise Lounger (Model Ll-770L)

The Pride Specialty Infinite Position Sleep Full Recline Chaise Lounger, model LL-770L, is a seat lift chair sleeper, and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. Designed for sitting, reclining, standing, and as a bed, this chair features full recline positioning and a lift mechanism that facilitates all three functions. Both the recline, sleep, and li

Pride Specialty Infinite Position Sleep Full Recline Chaise Lounger (Model Ll-770S)

The Pride Specialty Infinite Position Sleep Full Recline Chaise Lounger, model LL-770S, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. Designed for sitting, reclining, standing, and for use as a bed, this chair features full recline positioning and a lift mechanism that facilitates all three functions. Both the recline, sleep, and lif

Pride Specialty Infinite Position Trendenlenburg Chaise Lounger (Model Lc-125L)

The Pride Specialty Infinite Position Trendelenburg Chaise Lounger, model LC-125L, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. Designed for standing, sitting, and reclining, this chair features full recline with infinite Trendelenburg positioning and a lift mechanism that facilitates all three functions. Both the recline and lift m

Pride Specialty Infinite Position Trendenlenburg Chaise Lounger (Model Lc-125M)

The Pride Specialty Infinite Position Trendelenburg Chaise Lounger, model LC-125M, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. Designed for standing, sitting, and reclining, this chair features full recline with infinite Trendelenburg positioning and a lift mechanism that facilitates all three functions. Both the recline and lift m

Pride Specialty Infinite Position Trendenlenburg Chaise Lounger (Model Lc-125S)

The Pride Specialty Infinite Position Trendelenburg Chaise Lounger, model LC-125S, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. Designed for standing, sitting, and reclining, this chair features full recline with infinite Trendelenburg positioning and a lift mechanism that facilitates all three functions. Both the recline and lift m

Primary Bolster Chair

Chair with a flat padded bolster bench. Foot railings to maintain foot placement. with or without straps. Adjustable pelvic straps and tray. Back slots accept the TherAdapt Winged Back Insert and Thoracic Pads. 2 inch swivel casters. Bolster is 8 1/2 inches wide, 22 inches long and adjusts 9 to 15 inches in height. Tray is 28 inches wide, 28 inches deep and adjusts 5 1/2 to 8 1/2 inches cutout depth. Base is 29 by 20 1/2 inches.

Priva Soff-Quilt Bed Pads (Models P13605, P13205, P12605, P12606 & P11605)

The Priva Soff-Quilt Bed Pads are underpads designed to protect twin bed or hospital bed mattresses, linens, and other surfaces from wetness. These pads feature a moisture-proof outer layer, an absorbent inner soaker layer or layers, and a soft cotton-knit top layer. Models P13205 and P13605 are super premium models with four layers and an all-around binding; model P13205 also has tuck in flaps to keep the pad in place for restless sleepers. Models P12605 and P12606 are premium models with four

Pro Peak Pad.

Mattress of polyurethane foam, convoluted configuration. Sizes include 36 inches by 76 inches by 4 inches; 36 by 74 by 3; 30 by 74 by 2; 36 by 24 by 3; 30 by 40. Protective sleeves of polyethylene are available.

Professional Flotation Bed Pad (Models 6100, 6200, 6300, 6301, 6302, & 6303)

The Professional Flotation Bed Pad series are polymer mattress surfaces. These products are made of AKTON, a viscoelastic polymer, covered with a soft elastic film. The material is rubber- like which acts like a fluid but does not flow. It is washable and repairable. Available with a washable knit cover with a zipper closure (model 6200). DIMENSIONS: 17 x 27 x 7/8 inches to 35 x 80 inches. All products are available in custom sizes and shapes. WEIGHT: Approximately 38 pounds.

Professional Power Recliner

The Professional Power Recliner is a vibrotactile amplification system designed for use by individuals with cognitive, neurological, physical, or emotional disabilities. Used for positioning, calming, or stimulating, this chair features traditional tufted pillow recliner styling and a motorized recline mechanism. Stereo speakers are located at either side of the user's head. The built-in patented vibroacoustic speaker system provides tactile stimulation, enabling users to feel music as well as h

Proform Maximum

The ProForm Maximum is a hospital mattress designed for use by individuals who use hospital beds in the home. This mattress is constructed of layers of foam: The bottom layer is high-density foam for support; the center layer is high-density, precision die-cut foam designed to help prevent pressure ulcers; the top layer is soft, high-resiliency foam that conforms to the user's body; and the foot area is of super soft foam to protect the heels from pressure. Each layer is treated to be anti-micr

Prone Standing Frame Candidate For Batch Producers, Do-It-Yourselfers.

"DO IT YOURSELF" ENTRY PURPOSE: Stander to hold a child in an upright position and provide a play tray; or can be reconfigured to make a chair with a tray. Stander or seat for a very young child. Made of wood with an adjustable foot board and removable tray for toys or activities. A wide foam pad goes around the child's front and sides, and there is a wide strap to keep the child upright. The device can also be used as a chair by putting the footboard at seat height and moving the tray to the ot

Pu Moulded Perching Stool Tubular Back And Arms (Model 505 Pu)

The PU Moulded Perching Stool Tubular Back and Arms, model 505 PU, is an adjustable stool designed for individuals with balance or mobility disabilities. Equipped with an ergonomically designed hygienic padded seat, this stool's frame is made of high tensile steel tubing, and the back and arms are made of the same tubing and are not padded. The seat padding is made of polyurethane (PU) molded components which are non-slip and fire resistant. Other features include front and back bracing struts f

Pu Moulded Perching Stool With Padded Back (Models 503 Pu)

The PU Moulded Perching Stool with Padded Back, model 503 PU, is an adjustable stool designed for individuals with balance or mobility disabilities. Equipped with an ergonomically designed hygienic padded seat and back, this stool's frame (including the back) is made of high tensile steel tubing. The seat padding is made of polyurethane (PU) molded components which are non-slip and fire resistant. Other features include front and back bracing struts for additional strength and four rubber tipped

Pu Moulded Perching Stool With Padded Back And Padded Arms (Model 507 Pu)

The PU Moulded Perching Stool with Padded Back and Padded Arms, model 507 PU, is an adjustable stool designed for individuals with balance or mobility disabilities. Equipped with an ergonomically designed hygienic padded seat, back and arms, this stool's frame (including the back and arms) is made of high tensile steel tubing. The seat padding is made of polyurethane (PU) molded components which are non-slip and fire resistant. Other features include front and back bracing struts for additional

Pulsating Massage Pillow

The Pulsating Massage Pillow is a vibrating pillow designed for alerting individuals who are deaf or hard of hearing. The pillow itself is contorued to offer comfort and provide a good nights sleep. It attaches to various alerting devices, so that when an alarm is activated, the pillow begins to vibrate. POWER: Standard 110 V plug.

Queen's Pride 600 Convertible Bed (Model Qp3948)

The Queen's Pride 600 Convertible Bed, model QP3948, is a motorized bed designed for use by individuals with severe physical disabilities or spinal cord injury. This all-electric bed has a steel pan deck, six-button hand controls, and a high density foam mattress with a nylon cover. POWER: Uses 115 volts. OPTIONS: Heavy-duty side rails (model RA01920); bed-mounted trapeze (model TRQP3948); digital scale (SC600); and emergency battery back-up (model EBU600). DIMENSIONS: 38 x 80 inches, converts t

Queen’S Pride 800Tc

Queen's Pride 800TC is a heavy-duty motorized bed designed for use by individuals with severe physical disabilities or spinal cord injury. The bed has a foam mattress with Ventrex ticking and an eight-button control. It can be set to the Trendelenberg, reverse Trendelenberg, or cardio Chair position, or to a personalized position using independent head and knee catch. The foot section plateaus to reduce edema of the lower extremities. POWER: Uses 115 volts. OPTIONS: Digital scale (model SCTC800)

Queen’S Pride Bed (Model 600Lm)

The Queen's Pride Bed, model 600LM, is a heavy-duty motorized bed designed for use by individuals with severe physical disabilities or spinal cord injury. This all-electric bed has a steel pan deck, a five-button control for all functions, and a high density foam mattress with a nylon cover. POWER: Uses 115 volts. OPTIONS: Heavy-duty side rails (model RA01920); bed- mounted trapeze (model TRQP38/TRQP48); digital scale (model SC600); and emergency battery back-up (model EBU600). DIMENSIONS (LxW):

Quick Change 3-In-1 Bed System (Models Bg00, Bg22, Bg33, & Bg672)

Hospital bed system. Consists of basic split spring, standard hi/low bed ends, motor, motor control unit and crank all purchased separately. Bed converts from manual hi/low to semi electric, to all electric. No tools needed. Can be done with patient in bed. Basic spring steel channel frame. 84 zinc coated helical springs. Bed ends 4 post construction with oak laminate panels. 3 inch ball bearing casters. 9 inch height adjustment: 13 1/2 inch low spring height, 22 1/2 inch high spring height. Hea

Quik-Sorb Deluxe Reusable Underpad With Tucks (Model C2008)

The Quik-Sorb Deluxe Reusable Underpad with Tucks, model C2008, is a bed underpad and incontinence pad designed for use by individuals with incontinence. This pad has a Birdseye 100 percent cotton quilted top sheet with a waterproof Vintex back, a heavyweight eight-ounce liquidfill absorbent center, and two flaps to secure the pad under the mattress. They are washable and dryable. DIMENSIONS: The pad is 36 x 36 inches. Each of the flaps is 18 x 36 inches.

Quik-Sorb Economy Reusable Underpad (Model C2007)

The Quik-Sorb Economy Reusable Underpad, model C2007, is a bed underpad and incontinence pad designed for use by individuals with incontinence. This pad has a percale top sheet for softness and air circulation with a waterproof vinyl back, and a liquidfill absorbent center. They are washable and dryable. DIMENSIONS: The pad is 34 x 36 inches.

Quik-Sorb Reusable Plaid Underpads (Models C2010, C2011, & C2012)

The Quik-Sorb Plaid Reusable Underpads are bed underpads and incontinence pads designed for use by individuals with incontinence. These pads have Ibex quilted top sheets with waterproof Vintex backs and heavyweight liquidfill absorbent centers. They are washable and dryable up to 300 times. SIZES: Model C2010 is a chair pad, model 2011 is a bed/sofa pad, and model C2012 is a bed pad. DIMENSIONS: Model C2010 is 18 x 24 inches. Model C2011 is 24 x 36 inches. Model C2012 is 34 x 36 inches. COLOR:

Quik-Sorb Reusable Underpads (Models C2000, C2001, C2002, & C2006)

The Quik-Sorb Reusable Underpads are bed underpads and incontinence pads designed for use by individuals with incontinence. These pads have Birdseye 100 percent cotton quilted top sheets with waterproof Vintex backs and heavyweight eight-ounce liquidfill absorbent centers. They are washable and dryable up to 300 times. Model C2000 is a chair pad; the other models are bed/sofa pads. DIMENSIONS: Model C2000 is 17 x 24 inches. Model C2001 is 24 x 35 inches. Model C2002 is 34 x 35 inches. Model C200

Quik-Sorb Reusable Underpads (Models C2003 & C2004)

The Quik-Sorb Reusable Underpads are bed underpads and incontinence pads designed for use by individuals with incontinence. These pads have brushed polyester quilted top sheets with waterproof Vintex backs and heavyweight eight-ounce liquidfill absorbent centers. They are washable and dryable up to 300 times. DIMENSIONS: Model C2003 is 24 x 35 inches. Model C2004 is 34 x 35 inches.

Quik-Sorb Waterproof Draw Sheet (Model C6500)

The Quik-Sorb Waterproof Draw Sheet, model C6500, is a bed underpad designed for us by individuals with incontinence. This sheet provides complete bed coverage and has a vinyl center and cloth securing flaps at each end. This sheet is machine washable and dryable. DIMENSIONS (LxW): The sheet is 106 x 36 inches, the vinyl center is 76 x 36 inches, and each securing flap is 15 x 36 inches.

Quilted Plaid Incontinence Pad

The Quilted Plaid Incontinence Pad is a bed pad and incontinence pad designed for individuals with incontinence. Designed to look like an extra throw or blanket, this quilted top bed pad is made of an 80% cotton outer layer with a 20% Unique-Dri inner cores, combined with a waterproof backing. The pad provides protection for everyday household furniture. The pad can be machine washed and dried. DIMENSIONS (LxW): 36 x 34 inches. COLORS: Blue, white and pink plaid.

R&b Blanket Cradle

R&B Blanket Cradle is designed for individuals who are restricted to bed. Its design helps to prevent feet and leg problems like cramping, pressure ulcers, and additional discomfort from the constant pressure and irritation that may be caused by bedding movement when restricted to bed. This unit is installed from the side of the bed rather than the end to provide additional strength and support.

Raised Desk

DO IT YOURSELF PURPOSE: To enable individuals with spinal cord injuries or back pain to use a standard desk from a wheelchair, kneeling chair, or while standing. This desk is created by replacing the standard legs on a conventional desk with extra-long table-style legs. Each leg replacememt is kept rigid by two half-inch flat steel braces made of 0.5 x 1/8 inch steel bar. The top end of the steel is fastened to the desk with wood screws and the bottom ends are fastened to the legs with hose cl

Raised Height Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Blocks to raise the height of a table so a wheelchair can pull up to it. Describes table raisers made of wooden blocks the desired height, and pieces of 1 inch thick wood with holes the size of the table legs drilled in them, glued together. A nonslip pad can be glued on the bottom. SKILLS REQUIRED: Woodworking. AUTHOR: Independence Factory TITLE: How to Make it Cheap Manual: Volume 2 REF: Middletown, Ohio: Independence Factory: p 17 NARIC CALL NUMBER:

Raisers For Beds, Tables And Some Chairs.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Leg extenders to raise height of beds, tables or chairs. Describes two types of raisers. One is made with plywood and battens, and is screwed to the furniture leg. The other, also plywood, is made like a box into which the leg fits; pieces of wood, which fit in the box, adjust the height. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Aids for Your Handicapped Child REF: London, England: Souvenir Press: p 46-47. Also available from

Raising Chair

The Raising Chair is a seat lift mechanism designed to assist individuals to stand from a seat position. The raising platform rests on the seat of a regular chair. it contains a compressor and an air "bladder" which is constructed from three tire innertubes. The compressor fills the bladder with air much like a bellows, raising the seat platform and enabling the persons to stand. The frame of the seat lift is made of wood. PROTOTYPE DEVELOPMENT: Designed by Jay Drew for people who have difficult

Recliner Chair.

Upholstered recliner chairs; models with extended arms and seat available for easy transfer. Some models with lumbar and thoracic support.

Rehabilitation Table

The Rehabilitation Table is a height-adjustable tilt-top work table designed for use by individuals who use wheelchairs. The base is equipped with a modesty panel and is constructed of 18 gauge steel. The table has a laminate top with a raised edge and a cutout for access. The tilt angle adjusts from 0 to 35 degrees. The table has four caster for mobility and two of the casters lock. DIMENSIONS (HxDxW): The top is 0.75 x 30 x 40 inches. Table height adjusts from 29 to 44 inches. COLOR: Grey top

Reinforced Bed With Enclosure

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom-made bed for a child with Angelman syndrome to provide a safe and protected environment during sleep and periods of restlessness. The child had outgrown her previous modified cot and the new bed was needed to withstand the strenuous shaking the child applied during her periods of sleeplessness. The new design involved moving the child to a single mattress and building safety railings high enough so that she cannot climb over them a

Reinforced Chair

CUSTOM ADAPTATIONPURPOSE: To prevent children with cognitive disabilities and poor impulse control from rocking or throwing the chair. The chair frame was made from tubular steel and fitted with a steel seat and back. The backrest was slightly angled and curved for comfort. The legs were welded to steel plates which were bolted to metal floor plate with Tekscrews, creating a firm, immovable base. The chair was also equipped with a lap belt. TITLE: Reinforced Chair. JOURNAL: TAD Journal. REF

Reinforced Chair

CUSTOM ADAPTATION PURPOSE: To provide seating for a child with multiple disabilities, including cerebral palsy and intellectual disabilities, who rocked when seated. The chair needed to be strong enough to be difficult to rock and to be able to withstand any rocking motion generated while providing the needed positioning for eating and other activities. The chair base and frame were made of solid Tasmanian oak, with joints that are both screwed and glued. The seat, back, and base covering were

Relax Right Neck Pillow (Model 71000)

The Relax Right Neck Pillow, model 71000, is a cervical pillow designed for use by individuals with neck pain, injury or stiffness. Made of thermo-sensitive memory foam, this U-shaped pillow is designed to relax and support the neck while in a seated position during travel or while reading in bed. It has an antimicrobial velour cover that is machine washable. DIMENSIONS (HxLxW): 3 x 11 x 12 inches. COLOR: Blue

Relax The Back Footrest

The Relax The Back Footrest is a footstool designed for use by individuals with lower extremity or circulatory disabilities or back pain. Designed to accommodate all heights, this adjustable unit provides a gentle rocking motion to stimulate lower body circulation. Tall and standard heights are available.

Rest-Q Mattress

The Rest-Q Mattress is a therapeutic foam mattress designed for use by individuals in need of pressure relief, pain management, and wound care. The mattress features a waterproof top cover, a resilient layer of pressure reduction cushioning material that covers the complete surface, a soft strip of pressure relief polymer for hips and shoulders, and a lateral support section that provides full-length body support along the spine. The mattress is also equipped with side handles to aid transfers i

Restease Adjustable Foot Rest (Model 2120Bl)

The RestEase Adjustable Footrest, model 2120BL, is a footstool designed for use to help reduce leg and back pressure and improve posture and circulation while sitting. This height adjustable footrest has four angle adjustements and tilts from 6 to 25 degrees. It is made of high impact polystyrene plastic with an integrated anti-slip rubber mat. DIMENSIONS (HxDxW): 3.25 to 5 x 13.75 to 14.75 x 15.5 inches. WEIGHT: 3 pounds. COLOR: Black with silver accents.

Reusable Draw-Sheet

The Reusable Draw-Sheet is a waterproof sheet designed for use by individuals who are incontinent. This sheet has a 100 percent cotton birdseye facing, an Absorba-Fil insert, and a vinyl moisture barrier. Tuck-in flaps help keep the sheet in position. DIMENSIONS: 34 x 72 inches with flaps.

Reusable Flannel / Rubber Sheets

The Reusable Flannel / Rubber Sheets are designed for use by individuals who are incontinent. Available with a choice of single- or double-sided flannel covering, these protective sheets are made of soft, absorbent cotton flannel bonded to butyl rubber. DIMENSIONS: 36 x 36 inches or 36 x 54 inches.

Reusable Underpad (Model 7052)

The Reusable Underpad, model 7052, is a bed underpad designed to protect a mattress from moisture. The machine washable pad is made of two layers of heavy-weight diaper cloth with a one layer moisture barrier. The pad is waterproof and slip-resistant. DIMENSIONS: 34 x 23 inches.

Reversable Activity/hand Therapy Table (Model 6272)

The ReversABLE Activity/Hand Therapy Table is a wheelchair- accessible manual height adjustable therapy table designed for clinic use. This table combines a hand therapy with an activity board and accommodates two users. The activity board inserts rotate 360 degrees and have a laminated surface on one side and an oak pegboard with 100 holes on the other; the inserts can be locked flat or at a 60-degree angle. A set of 200 easy-grip stackable pegs is included. DIMENSIONS: The front radius is 94 i

Rfi Multi-Use Desk / Table.

Adjustable height worktable from 21 to 34 inches. 44 inches wide by 24 inches deep. Red oak frame, contoured matching laminate work surface. Designed spill rail, prosthetic device holder, side mounted book caddy. Accommodates children and adults.

Rifton Multidesk (Models E270 & E280)

The Rifton MultiDesk, models E270 and E280, is an accessible table designed for use by individuals who use wheelchairs. Available with a tilt or fixed flat top, these tables have curved cutouts for access and are height adjustable without tools. The tilt-top models have a table top that tilts upward with a double-latching mechanism in 5-degree increments, from 0 to 30 degrees. A book ledge keeps items positioned when top is tilted. OPTIONS: Three- or five-inch deep top-opening book boxes that at

Rifton Stationary Chair Large (Model R613)

The Rifton Stationary Chair, model R613, is a positioning chair designed for individuals 53 to 72 inches tall with mild physical or neurological disabilities. Intended for individuals who can walk with assistance and do not need a chair on wheels, this chair enables the child to sit properly positioned with feet on the floor (or with the footboard at floor level). The Stationary Chair comes with the chair frame, and a choice of the low backrest with armrests and pads or the high backrest with ar

Rifton Stationary Chair Medium (Model R612)

The Rifton Stationary Chair Medium, model R612, is a youth positioning chair designed for use by individuals 42 to 55 inches tall with mild physical or neurological disabilities. Intended for individuals who can walk with assistance and do not need a chair on wheels, this chair enables the child to sit properly positioned with feet on the floor (or with the footboard at floor level). The Stationary Chair comes with the chair frame, and a choice of a low backrest with armrests and pads or a high

Rifton Stationary Chair Small (Model R611)

The Rifton Stationary Chair Small, model R611, is a youth positioning chair designed for children 36 to 46 inches tall with mild physical or neurological disabilities. Intended for children who can walk with assistance and do not need a chair on wheels, this chair enables the child to sit properly positioned with feet on the floor (or with the footboard at floor level). The Stationary Chair comes with the chair frame and backrest with armrests and pads. The seat depth is adjustable, and there is

Rifton Toddler Chair (Models E760, E770, & E780)

The Rifton Toddler Chairs are positioning chairs designed for use by children with physical or neurological disabilities. Made of solid maple, these chairs are designed to encourage normal posture while discouraging abnormal patterns. The calf rest swings and locks at the desired angle for varying degrees of knee flexion. The footrests adjust separately for vertical height position, and can pivot out of the way to facilitate transfers. All models include a hip strap. OPTIONS: Tray, suction cup

Rigid Step Stool (Model 13310-1)

This Rigid Step Stool Model 13310-1, is primarily designed for use in exam, patients, x-ray, and emergency rooms. The frame is all welded steel with rubber tips and a Brewerchrome finish. The step is covered with a rubber mat. DIMENSIONS: 9 h x 18 x 14.25 inches, Top 14.25 x 11.25 inches. WEIGHT: Shipping weight 14 pounds. WARRANTY: Three Year Limited Warranty.

Rigid Step Stool With Hand Rail (Model 13314-0)

The Rigid Step Stool with Hand Rail, Model 13314-0 is primarily used in exam, patients, x-ray, and emergency rooms. The stool and hand rail are tubular steel with rubber tips on legs and a Brewerchrome finish. The step is covered with a rubber mat. DIMENSIONS: Stool 9 h x 14.25 x 11.25 inches, Top 11.25 x 14.25 inches, Overall 34 h inches, Handrail 34 h from top to floor. WEIGHT: Shipping weight 12 pounds. WARRANTY: Three Year Limited Warranty.

Robotic Bed

---- PROTOTYPE --------- PURPOSE: Panasonic has created a prototype robotic bed which transforms into a wheelchair allowing the elderly or individuals with disabilities to get up without assistance. The user remains in the bed while the bed turns into a wheelchair. The conversion to a wheelchair involves half of the mattress rising and half lowering while a motorized unit beneath it automatically slides out from the bed. While in chair mode, the robot can detect people and obstacles and assist u

Rock & Roll Mobile Rocking Chair

The Rock & Roll Mobile Rocking Chair is a rocking chair with a seating system and transport wheelchair designed to for use by adults with with balance, lower extremity, mobility or walking disabilities and others who cannot stand for long periods of time and must sit for significant periods. FRAME (LxW): 32.28 x 21.65 inches. The rocking mechanism of the Rock & Roll chair can be activated by the user or an attendant, and it is intended to alternate pressure points to reduce the risk of d

Rocking Chair With Concealed Rocking Mechanism

CUSTOM ADAPTATION PURPOSE: To enable individuals with dementia to benefit from rocking while not risking injury if they disassemble the mechanism. The chair was constructed by attaching the upper part of a standard hospital Geri chair to a tubular steel base that moves the chair back and forth. The mechanism to move the chair was enclosed in order to prevent people from getting their feet caught in it. The seat of the chaqir is bolted to a square frame that has rods attached to the bottom. The

Roll-Control Bolsters

The Roll-Control Bolsters are body positioners designed to provide secure positioning for individuals with physical disabilities. Intended for individuals who lie on their sides, these vinyl-covered, foam-padded bolsters eliminate the need for propping with pillows and prevent arms and legs from being caught between the mattress and side rails. Attached straps secure the bolster to the bed and aid in positioning. The bolsters are latex free. DIMENSIONS (LxW): 34 x 8.5 inches.

Roller Chair.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Tubular chair with a straight back allowing a child with spastic cerebral palsy to sit with legs apart and feet flat on the ground. Chair made of plywood and hardboard. Two 8 by 8 pieces of wood rounded at the top are joined by 3 struts, two on the bottom, one on top. A piece of plywood 15 1/2 by 20 inches rounded at the top is screwed to the back. Hardboard (14 by 21 1/ 2 inches) is soaked overnight then bent over frame and tacked into place. A 1 by 1

Rolling 3 Leg Stool (Model 20H014A)

The Rolling 3 Leg Stool, model 20H014A, is a caster stool designed for use by seniors or individuals with balance or mobility disabilities or arthritis. This lightweight, three-legged stool has fully rotating, non-locking casters and a padded seat. Designed for working at a near standing position, the stool supports 90 percent of body weight while allowing the user to move around in small work areas. It can be used in kitchens, workshops, or bathrooms. DIMENSIONS: Seat height is adjustable from

Rolls

The Rolls are therapy foam shapes designed for positioning and/or balance training. These cylindrical cushions are made of high-density foam with a waterproof and cleanable vinyl cover. DIMENSIONS: Nine different sizes are available, measuring 7 x 17 inches, 5 x 20 or 22 inches, 8 x 20 or 36 inches, 6 x 24 inches, 5.5 x 20 inches, and 10 or 12 x 36 inches.

Rolyan Body Positioner (Model A5781)

The Body Positioner, model A578-1, is designed for use by individuals with spinal, lower extremity, and other physical disabilities. This soft, flexible wedge can be used effectively to shift various body parts into necessary positions. If placed underneath the back, the Body Positioner supports the spine and relieves pressure on the sacrum. Placed underneath the side, the Body Positioner stablizes the trunk. It helps maintain a pelvic tilt in pelvic traction when placed underneath the thighs. A

Rolyan Cervical Roll (Model A818301)

The Rolyan Cervical roll, model A818301, is a neck pillow designed to assist with cervical spine alignment for persons with cervical pain and stress. This foam roll is wrapped with a cotton cover and helps to encourage proper neck flexion. It can be machine washed and dried. DIMENSIONS: (Length x Width) 18 x 4.25 inches.

Rolyan Synthetic Sheepskin Pad (Models 4086-01 & 4086-02)

The Rolyan Synthetic Sheepskin Pad, models 4086-01, and 4086-02, is a synthetic sheepskin bed pad designed to help prevent pressure sores. The hypo-allergenic, machine-washable pad is soft 100 per cent polyester pile. DIMENSIONS: Model 4086-01 is 24 x 30 inches and model 4086-02 is 30 x 40 inches.

Round Cervical Pillow (Model N5003, N5004, & N5005)

The Round Cervical Pillow is a cervical pillow designed to support and correctly position the neck. Designed to provide neck support while sleeping on the back, this pillow promotes proper cervical alignment. Model N5003 has a cotton cover and models N5004 and N5005 have satin covers. DIMENSIONS: 6 x 18 inches. COLOR: Models 5003 and 5004 have white covers and model N5005 has a blue cover.

Round Neck Pillow (Model 8901)

The Round Neck Pillow, model 08901 is a cervical pillow designed for use by individuals with neck pain or other upper extremity disabilities. The pillow aids in the treatment of neck disorders and helps maintain proper alignment of the neck while sleeping or resting. It is constructed of soft polyester fibers. OPTION: Extra cover for Round Neck Pillow is available. DIMENSIONS (HxW): 17 x 7 inches. COLOR: White

Rubbermaid Adjustable-Height C-Frame Overbed Table

The Rubbermaid Adjustable-Height C-Frame Overbed Table is designed to provide eating and work space for individuals who are in bed for extended periods or who use wheelchairs Constructed of molded composite plastic, this height-adjustable table has a C-frame base to slide under the bed or for wheelchair accessibility. The table converts for right-or left-handed use and features a large wipe-clean worksurface with a molded-in cup holder and four easy-roll casters. DIMENSIONS: The height adjusts f

Runged Tabletop

CUSTOM ADAPTATIONPURPOSE: To provide children unable to stand without support with a table incorporating grips that provide support when standing or sitting. The rectangular tabletop is fitted to the base of a height-adjustable table and is made from a single piece of 12-millimeter (mm) plywood. On each lengthwise half of the tabletop, two sets of 37-centimeter (cm) long slots are cut using a router. These "rungs" are two cm wide on one half and three cm wide on the other to accommodate differen

Safe Rocking Glider

The Safe Rocking Gloder is a rocking chair designed for use by individuals with Alzheimer's Disease or balance disabilities. This chair provides a glide rocking motion and is equipped with an automatic locking feature that engages as the user is entering or exiting the chair. The chair has a wood frame and padded wooden arms and a padded seat and back with Crypton upholstery. COLOR: Mahogany-finished wood with a choice of Buckingham blue/green, foral tapestry, conch beige, merlot burgundy, lak

Safety Padding

Safety Pads are designed for use in SleepSafe beds to prevent injury. Custom made to fit the SleepSafe bed (see entries) safety rails and/or head/foot boards, these pads are made of high- density, half-inch foam. They attach with industrial-strength Velcro.

Safety Sleeper

The Safety Sleeper is an enclosed bed designed for use by children with autism, behavior disorders or sleep disorders such as sleepwalking that cause wandering. This bed's frame is made of aluminum and stainless steel and consists of six sections which slide together and lock in place. The top connects to the base with pull pins. It is fully self-supportive, and the assembly requires no additional hardware. A screen covering covers all four sides and and the top of the bed and has a zipper openi

Sammons Preston Bed Pull-Up (Model 5130)

The Sammons Preston Bed Pull-Up is a rope ladder designed to enable people with physical disabilities to pull themselves to a sitting position in bed. The device is composed of an 85-inch webbing with four 12-inch arm loops. A long strap attaches to the bed frame. CAPACITY: 200 pounds.

Sammons Preston Versa Form Positioning Pillows (Models 2820, 2822, 2821 & 2823)

Sammons Preston Versa Form Positioning Pillows, models 2820, 2821, 2822, and 2823, are body positioner pillows designed to provide support and proper positioning for children and adults with physical disabilities. These pillows are filled with styrene beads which conform to the shape of the user. When air is extracted using a vacuum pump, Versa Form molds to the body shape, creating firm support. When a valve is released, allowing air into the pillow Versa form regains its flexibility and is rea

Satin Neck Roll Pillow (Model 301)

The Satin Neck Roll Pillow, model 301, is a cervical pillow designed for use by individuals with neck pain or arthritis. Made of Ripple Ease Foam with a firm foam center, this pillow has a removable, washable satin case. COLOR: Blue, pink, or ecru.

Satin Therapeutic Pillow (Model 500)

The Satin Therapeutic Pillow, model 500, is a contoured pillow designed for use by individuals with neck pain or arthritis. This convoluted foam pillow has a neck cut out and a hand- washable satin cover. COLOR: Blue, ecru, or pink.

Saturn Square Ada Picnic Table (Model T46Ebperf3P)

The Saturn Square ADA Picnic Table, model T46EBPERF3P, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. The table has benches on three sides with space for a wheelchair on the fourth side. The table has a high-gloss surface with smooth rolled edges and an umbrella hole in the center. It is made from 11-gauge punched steel with a plastic-coated top and seats. DIMENSIONS (HxLxW): 18 x 46 x 46 inches. The seats are 38 inches long by 12 i

Scooter Stool

Aluminum stool mounted on ball-bearing casters. Tan padded seat. 18 inches high. Useful for helping teachers work at child's level.

Seat Cushion (Model Ha-4783)

The Seat Cushion, model HA-4783, is a foam ring seat cushion designed for use by individuals who are at risk for developing pressures sores/decubitus ulcers. This polyurethane ring-shaped foam cushion helps reduce pressure and has a washable cotton cover. DIMENSIONS (HxLxW): 70 x 400 x 340 millimeters. WEIGHT: 370 grams.

Seating For Production Worker

DO IT YOURSELF ENTRYPURPOSE: To enable individuals with neurological or balance disabilities to work at multiple production workbenches. For individuals with balance and neurological disabilities, standing or sitting on high stools to perform production work is often not an option. To create this adaptation, a shop-quality operator's chair on a star-shaped pedestal base was selected to be secured to a custom platform. The wooden platform was constructed to raise the chair to the appropriate heig

Security Pole

The Security Pole is a vertical pole transfer aid designed for use by individuals with balance, mobility, or lower extremity disabilities. This pole can be installed in any room and placed beside a chair, bed, couch, toilet, shower, or tub to assist with standing and sitting and transfers. It can also be moved between rooms if needed. Made of rust-resistant, zinc-plated steel, this floor-to-ceiling pole is tension mounted and is packaged with its own wrench; no other tools are required. The Secu

Security Pole & Curve Grab Bar

The Security Pole and Curve Grab Bar is a vertical pole transfer aid designed for use by individuals with balance, mobility, or lower extremity disabilities. This pole can be installed in any room and placed beside a chair, bed, couch, toilet, shower, or tub to assist with standing and sitting and transfers. It can also be moved between rooms if needed. Made of rust-resistant, zinc-plated steel, this floor-to-ceiling pole is tension mounted and is packaged with its own wrench; no other tools are

Semi Electric Bed (Model 5310)

The Semi Electric Bed is a motorized bed designed to offer the user four adjusting positions for the head and knees. The bed is permanently attached but can be folded away. A hi/low crank adjusts the bed's height. POWER: Motors - 85 rpm. DIMENSIONS: 88 x 36 inches (l x w); Height - 15(7/8) to 24(5/8) inches.

Semi-Electric Extra Long Hospital Bed

The Semi-Electric Extra Long Hospital Bed is a motorized adjustable bed designed for use by individuals who need to elevate the head of the bed. This bed features a 312-coil innerspring mattress, an epoxy-coated steel frame, a headboard and a footboard, and four ball-bearing casters (two locking). The head of the bed adjusts from flat to a sitting position and the knee area flexes for comfort using the remote control. The bed height is adjustable using the hand crank at the foot of the bed.. CON

Senseez

The Senseez is a vibrating pillow and sensory integration activity designed for use by children with autism or other tactile, sensory, or neurological disabilities. Designed to enhance tactile awareness in children, these vinyl pillows with poly foam fill offer a gentle vibration when they are squeezed or sat upon. The pillow is available in three shapes - square, circle and heart. The round pillow is also available with a furry cover and a tail for additional tactile feedback. POWER: Uses three

Sensitrac Flat Pad With 360 Degree Angle Adjustable Arm

The Sensitrac Flat Pad with 360 Degree Angle Adjustable Arm is a suction pad system with an adjustable-angle mounting arm designed for use by individuals with communication, neurological, or upper extremity disabilities or spinal cord injury. This micro suction pad system is designed for switches and lightweight devices that require multiple positioning angles for better access. It can hold devices measuring up to 6 x 6 inches and weighing up to two pounds. The arm adjusts 360 degrees around and

Sensory Table

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted sensory table for children of different ages with hearing or visual disabilities. An adjustable table with a round wooden top, a metal frame, and adjustable legs was used for this adaptation. The top of the table was removed from the frame and four indents were cut into the sides of the table allowing four children to stand supported at the table. A plastic container was fitted through a hole cut in the table top and the sq

Serena Pillow Lift

The Serena Pillow Lift is a pillow raiser designed for use by individuals with physical or respiratory disabilities. At the touch of a hand-control button, this under-pillow lift raises and lowers the user's upper body in bed. It assists users with limited upper body strength to alter their position from lying to sitting in bed. It also allows users with respiratory or cardiac conditions to sleep in a semi-elevated position. In its raised position, it may also assist with getting in and out of b

Serenity Bariatric Dialysis Recliner (Model Mds654)

The Serenity Bariatric Dialysis Recliner, model MDS654, is a recliner chair designed for use by individuals undergoing dialysis treatment. This heavy-duty recliner has an extra-wide seat. During dialysis, the attendant can place the seat into a deep recline or trendelenburg position if necessary. The chair also has wide cushioned armrests and an oversized footrest that gives foot support to taller individuals. It has a welded, powder-coated steel frame, an elastic seat base, adjustable elastic b

Serenity Bariatric Recliner (Model Mds529)

The Serenity Bariatric Recliner, model MDS529, is a recliner chair designed for use by individuals with mobility disabilities. This heavy-duty recliner features a wide seat, wide armrests with extra cushioning, and an oversized footrest that gives foot support to taller individuals. The chair has a welded, powder-coated steel frame, an elastic seat base, adjustable elastic back straps, and lumbar support. The chair comes with two side tables, which can be folded down or locked in an upright posi

Serenity Homecare Enclosed Bed System

The Serenity Homecare Enclosed Bed System is a bed with enclosure designed to prevent individuals with cognitive, emotional, or behavioral disabilities from leaving the bed without the use of restraints. This freestanding bed has a healthcare quality mattress and soft side rails with an enclosure on all four sides. The ligthweight aluminum frame is padded and the enclosure side, head, and foot panels are made of soft polyester mesh and vinyl, providing security while maintaining air flow and vis

Sewing Machine Modifications

The Sewing Machine Modifications are designed to make a sewing machine table wheelchair accessible. The modifications include a commercial sewing machine table that has been raised 10 inches to accommodate a wheelchair and an inverted foot pedal. PROTOTYPE DEVELOPMENT: Designed by Paul Cermak for a wheelchair user to enable the person to wheel right up under the table, and the foot control pedal was inverted to allow the individual a better reach from the wheelchair.

Sheepette Synthetic Sheepskin Bed Pads (Models D5001, D5002, D5003, & D5004)

The Sheepette Synthetic Sheepskin Bed Pads are decubitus pads designed for use by individuals with or at risk for pressure sores or ulcers. Maded of dense, heavyweight synthetic sheepskin, these pads distribute pressure evenly, allows air circulation, and help prevent skin shear. The pads are machine washable and dryable. Model D5004 has elastric securing straps on all four corners. DIMENSIONS: Model D5001 is 24 x 30 inches, model D5002 is 30 x 40 inches, model D5003 is 30 x 60 inches, and model

Sheepette Wheelchair Armrest And Seat Pads (Models D3004 & D3005)

The Sheepette Wheelchair Armrest Pad, model D3004, and Seat Pads, model D3005, are decubitus pads designed for use by individuals at risk for pressure sores or ulcers. Made of synthetic sheepskin, the seat pad is a one-piece pad that covers wheelchair back and seat to provide pressure relief. Also made of synthetic sheepskin, the armrest pads cover the armrests of the wheelchair to reduce pressure on the arms and elbows.

Sheepskin Mattress Cover (Model 104)

The Sheepskin Mattress Cover, model 104, is a hospital bed mattress cover and decubitus pad designed for use by individuals at risk for pressure sores or ulcers. This tanned natural sheepskin is machine washable and dryable, and it has elastic straps on the corners to attach it to a mattress. It is intended for use in hospitals and nursing homes. DIMENSIONS (LxW): 72 x 32 inches. COLOR: Natural.

Sheepskin Neck Pillow

The Sheepskin Neck Pillow is a cervical pillow designed to support the neck, and head. This U-shaped pillow fits around the neck and can be used while sitting up or lying down. The washable, removable synthetic cover permits air circulation for comfort. OPTIONS: Replacement covers.

Sheet Frame

DO IT YOURSELF ENTRY --- PURPOSE: To hold heavy sheets and blankets off of a person's legs to prevent the person from getting tangled in them. The dimensions of the frame depend on the length and height of the bed, so no measurements are provided. The frame's base is constructed from 1.25-inch PVC pipe. Two "L"-shaped sections of pipe of equal size are placed on the floor with the longer sections parallel and the shorter sections pointing toward one another. Connect a 90 degree elbow fitting to

Sheffield Ada Picnic Table

The Sheffield ADA Picnic Table table is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This rectangular table has two benches and space at one end to accommodate a wheelchair. The frame is made from an average of 66% recycled steel. The table top and seats are made from heavy gauge expanded metal with 30% recycled plastic content. OPTIONS: Surface mount table clamps (2 per table) to deter theft. DIMENSIONS (HxLxW): Table is 31 x 96 x 3

Side Rail (Model 5000)

Model 5000 is a universal, adjustable side rail designed to fit most hospital beds 34 to 37 inches wide. The rails are chrome plated steel, cross brace mounted with spring clamps, and spring loaded pin locks. DIMENSIONS: The rails can be adjusted in length from 47 inches to full bed length.

Side Rail (Model 6081)

Telescoping side rails for hospital bed, length 48 to 84 inches. Cross braces attach to any bed 34 to 36 1/2 inches wide. Chrome plated steel.

Side Rail (Model 6083)

Half length side rail, 31 1/2 inches long. Attaches to any gatch type hospital bed with open spring.

Side Rail Wedges (Models 5708 & 5708S)

The Side Rail Wedges, models 5708 and 5708S, are side rail pads designed to provide protection from injury from bed side rails. These wedges may be used singly to cover or close the gap between half side rails or zipped together to provide full-length protection of double half side rails, three-quarter side rails, or full-length side rails. Three pairs can be used to cover side rails and head- and footboards. These protectors are made of soft foam and covered in vinyl that can be wiped clean. D

Sierra Electric Adjustable Workcenter

The Sierra Electric Adjustable Workcenter is a powered height adjustable computer work station designed for use by individuals who use wheelchairs, individuals of short stature, individuals who stand to work, and others who can benefit from a higher or lower work station. The surface height adjusts at 2 inches per second, with a lifting capacity of 250 pounds. The backlit liquid crystal display (LCD) control panel has tactile soft-touch control buttons and three programmable memory height preset

Simple Travel Pillow

The Simple Travel Pillow is a contoured inflatable pillow designed to provide support for the head and neck of a person who sits for long periods of time. List other features and descriptions here. When placed behind the user's head, this pillow provides cervical neck support, and it supports the head laterally so that the head and neck remain aligned with the spine. It also has an inflatable dome pump to provide a customized firmness for each user. The Smart Travel Pillow has high impact polyme

Single Adjustable Table (Model 7Whcs) & Double Adjustable Table (Model 7Whcd)

The Single Adjustable Table, model 7WHCS, is an accessible table designed for use by people who use wheelchairs. This height-adjustable table has an open base, a torso cut-out to enable the user to position himself/herself close to the work area, and a raised rim on three sides to prevent items from tolling off. The Double Adjustable Table, model 7WHCD, is also height adjustable and features dual torso cut-outs to enable two wheelchair users to face each other while using the table. Raised rims

Single-Surface Height-Adjustable Work Station

The Single-Surface Height-Adjustable Work Station is a height-adjustable work table designed to accomodate both manual and powered wheelchair users. The height is adjusted using a hand crank which retracts out of the way when not in use. A comfort recess enables the user to get close to the table to maximize usable surface area. Casters provide mobility. OPTIONS: Articulating keyboard arm. DIMENSIONS (HxLxW): The work surface is 48 x 30 inches. The height is adjustable from 24 to 34 inches. COLO

Six Piece Modular Positioning Set

The Six Piece Modular Positioning Set consists of foam positioning blocks designed to create individualized occupational and physical therapy treatment programs for persons with varying disabilities. The design accommodates numerous positions within the developmental sequence. The pieces are vinyl-covered, and therefore waterproof and cleanable with soap and water. The set consists of interchangeable rectangles, squares, and triangles (wedges). All sets come with four straps included. SIZES: Thr

Slatted Bed Board

The Slatted Bed Board is designed for use by individuals with back injuries and spinal cord disabilities. This slatted board slides between the mattress and the box springs to provide additional support. Made of hardwood slats connected by durable nylon strapping, this board provides both flexibility and support and folds for storage. DIMENSIONS: 30 x 60 inches.

Sleek Seat.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Positioning seat to hold a child's legs in a flexed position, bring the shoulders into protraction and allow the hands to come together midline. Chair made from a large cardboard or PVC tube cut into the shape of a chair with edges padded with foam tubing, and a hole cut out of the area behind the head. The seat is a velcro-attached cotton sling, adjustable in depth, suspended in the tube. Includes drawings. SKILLS REQUIRED: Plastics. Sewing. Assembly.

Sleep Posture Pillow / Side Sleeper Pro

The Sleep Posture Pillow/Side Sleeper Pro is a body support pillow designed for use by individuals with sleep apnea, snoring, fatigue, neck and back pain, and bed soreness. This pillow is formed and shaped to support the head, neck, back and jaw for proper alignment. The pillow encourages side sleeping rather than rolling onto the back or stomach which can cause a twisting of the spine and back strain. A small space on the pillow accommodates the user’s ear and prevents painful "ear folding." Th

Sleep Vip Transcend Travel Cpap (Sku 12Nst 100)

The SleepVIP Transcend Travel Continuous Positive Airway Pressure (CPAP) machine is designed for use by individuals who live with sleep apnea. Small and portable. Universal Hose Adaptor. Portable battery-powered. Vibration-free blower As for compliance reporting, this CPAP system is email-capable. Apnea-Hypopnea Index (AHI) and leak detection. 13 months of data storage on device and downloadable onto Universal Series Bus (USB). E-mail address and prescription required for purchase. Operating pre

Sleep-Improving Pillow Wedge

The Sleep-Improving Pillow Wedge is a positioning Wedge designed for use by individuals with respiratory or circulatory disabilities or acid reflux. The pillow is sized for use by one person and is crafted from two layers of medical-grade urethane foam, with a quilted cotton/polyester cover that zips off for washing. DIMENSIONS (HxWxL): 5 x 26 x 32 inches. WEIGHT: 4 pounds.

Sleep-Safe Pillow

The Sleep-Safe Pillow is an anti-suffocation pillow designed for use by individuals with epilepsy or seizures. The pillow has features to help prevent suffocation. It is made from a soft, porous foam with an open cell structure for breathability. Any head movement pumps air from the interior cavity across channels that pass around the head. The surface is rippled to provide a profusion of air spaces between the surface of the pillow and the net cover. Air can pass freely over the surface of the

Sleeper Lounge Electric Bed

The Sleeper Lounge Electric Bed is an adjustable motorized bed designed for home use by individuals with spinal cord injury or severe physical disabilities. This bed elevates to a full sitting position and features coil springs, box springs, and reversible mattresses, which are available in five firmnesses from soft to extra, extra firm. The bed also includes heavy- duty ticking, cordless dual side controls plus hand control unit, and belt drive. SIZES: Available in twin, full, queen, king, and

Sleeping In Comfort System

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted system to raise and lower legs at night for an individual with muscular dystrophy. The man with muscular dystrophy began using a ventilator at night and had to start sleeping on his back. He developed severe pain in his knees after three hours of sleeping in this position due to pressure that built up on his kneecaps. The individual was unable to change positions in the night without assistance, and since he lived independe

Sleeping Wedge

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted wedge for sleeping for a young adult with quadriplegic cerebral palsy. Initially an abduction wedge was used to assist in keeping the young adult’s hips in correct position after repeated surgeries. However, while the wedge is no longer needed for orthopedic reasons this individual does not feel comfortable sleeping without it but has since outgrown the original wedge. The new design had to account for variations in body me

Sleepsafe, The

The SleepSafe is a bed designed for children and adults with physical or cognitive disabilities. The head and footboards extend below the mattress, eliminating the gaps between the head/foot board or side rails and mattress, thus reducing the chance of entrapment. The full- length side locking safety rails are made of wood and have clear windows for ease in viewing. The safety rails swing down and are removable. The bed includes the foundation (bunkie board or box spring); premium pressure-redu

Sleepsafeii Plus, The

The SleepSafeII Plus is a bed designed for children and adults with physical or cognitive disabilities. The headboard and footboard extend below the mattress, eliminating the gaps between the head/foot board or side rails and mattress, thus reducing the chance of entrapment. The Plus model provides remote-controlled articulation (raising and lowering of head and foot). The full-length side locking safety rails are made of wood and have clear windows for ease in viewing. The full-length rails s

Sleepsafeii, The

The SleepSafeII is a bed designed for children and adults with physical or cognitive disabilities. The head/foot boards extend below the mattress, eliminating the gaps between the head/foot board or side rails and mattress, thus reducing the chance of entrapment. The full-length side locking safety rails are made of wood and have clear windows for ease in viewing. The safety rails swing down and are removable. The bed includes the foundation (bunkie board or boxspring); premium pressure-reducing

Sleepsafeplus, The

The SleepSafePlus is a bed designed for children and adults with physical or cognitive disabilities. The head/foot boards extend below the mattress, eliminating the gaps between the head/foot board or side rails and mattress, thus reducing the chance of entrapment. The full-length side locking safety rails are made of wood and have clear windows for ease in viewing. The safety rails swing down and are removable. This bed provides remote-controlled articulation (raising and lowering of head and f

Sleepsafer Plus, The

The SleepSafePlus is a bed designed for children and adults with physical or cognitive disabilities. The head/foot boards extend below the mattress, eliminating the gaps between the head/foot board or side rails and mattress, thus reducing the chance of entrapment. The full-length side locking safety rails are made of wood and have clear windows for ease in viewing. The safety rails swing down and are removable. This bed provides remote-controlled articulation (raising and lowering of head and f

Sleepsafer, The

The SleepSafer is a bed designed for active children and adults with physical or cognitive disabilities. The head and footboards extend below the mattress, eliminating the gaps between the head/foot board or side rails and mattress, thus reducing the chance of entrapment. The full-length side locking safety rails are made of wood and have clear windows for ease in viewing. The safety rails swing down and are removable. The bed includes a foundation (bunkie board or boxspring); premium pressure-

Slumber Series Hi Side Bed (Models Ss 120, Ss 170 & Ss 190)

The Slumber Series Hi Side Bed, models SS 120, SS 170 and SS 190, is an enclosed bed designed designed to prevent individuals with cognitive, emotional, or behavioral disabilities or autism from leaving the bed without the use of restraints. This bed features solid wood construction and an enclosure that extends 32 inches above the mattress. It has a poly resin coated Bunkie board. There is a door on one side of the bed that locks on the outside and folds down to open. The door has acrylic panel

Slumber Series Standard Side Bed (Models Ss 100, Ss 150 & Ss 180)

The Slumber Series Standard Side Bed, models SS 100, SS 150 and SS 180, is an enclosed bed designed designed to prevent individuals with cognitive, emotional, or behavioral disabilities or autism from leaving the bed without the use of restraints. This bed features solid wood construction and an enclosure that extends 20 inches above the mattress. It has a poly resin coated Bunkie board. There is a door on one side of the bed that locks on the outside and opens down. The door has acrylic panels

Smart-Rail

The Smart-Rail is a transfer aid designed to assist individuals with mobility and balance disabilities in entering and exiting the bed. The steel rail attaches to a steel frame that slips between the mattress and the box springs. Safety straps provide additional support in anchoring the unit to the bed. The unit locks in place at the bedside and lifting it to unlock it allows it to swing out to assist in standing. Models are available for standard and hospital beds. OPTIONS: Leg extenders. DIMEN

Snoozy's Waterproof Sheet Protector

Snoozy's Waterproof Sheet Protector is a bed underpad designed to protect mattresses, bedding, and linens on twin beds from incontinence. The four-layer quilted pad is designed to be placed over the bottom sheet and replaced with a fresh one in the event of incontinence. The pads are machine washable and dryable and they may be bleached. They are also designed to be folded for ease in transport. DIMENSIONS: 34 x 35 inches. COLOR: Available in a choice of two cartoon prints depicting the adventur

Snore-No-More Pillow

The Snore-No-More Pillow is an anti-snoring pillow designed to prevent snoring by supporting the user's posture during sleep. This pillow positions the head and neck in a sleeping posture that helps reduce blockage of breathing passages. The pillow helps keep the chin elevated off the chest when the user is sleeping on his or her back so the airway is open and snoring is less likely. When the user is sleeping on one side, the curved roll of the pillow fits under the neck to help keep the jaw for

Sof-Care Bed Cushion, Bed Cushion Plus, & Chair Cushion

Air flotation mattress surface. 300 individual air cell design allows air to transfer through interconnecting channels, redistributing patient weight over entire cushion. Corner straps for stability. Bed cushion: 33 1/2 inches by 75 1/4 inches. Sof-Care Chair Cushion, 18 inches by 17 inches. Cotton/poly terry cover. Velcro closure. Options: Inflator, 4 inches diameter by 13 inches long, 3 pounds. Inflation Adapter can be used in conjunction with bicycle pump. Warranty available.

Sofa Or Chair Raiser

DO IT YOURSELF ENTRYPURPOSE: To enable individuals with lower extremity, balance, or mobility disabilities or arthritis to enter or exit a chair more easily. Included in a chapter entitled "Living Room & Leisure Activities," this article describes how to create a box platform to increase the height of a chair or sofa from two to four inches, depending on the needs of the user. The article includes detailed instructions and multiple illustrations depicting the various stages of the project. F

Soft O Clave Mattress Protector

The Soft O Clave Mattress Protector is a matress protector designed to protect mattresses from damage. These synthetic covers have elastic corners and are available in crib, bunk, single, hospital, 3/4, double, queen, king sizes. The covers are flame retardant, washable, and non-allergenic.

Soft O Clave Pillow Protector

The Soft O Clave pillow protector is a pillow protector designed to protect pillows from damage. The covers are synthetic, flame retardant, washable, and non-allergenic. Covers are available in zipper or slip-n-tuck styles.

Soft Touch Tuffet Leg Rest

The Soft Touch Tuffet Leg Rest is a footstool designed for use by individuals with lower extremity disabilities or who use wheelchairs. This soft plastic footstool rocks to the most comfortable position or inverts for use as a standard footstool and it fits between the swing-away legrests of most standard wheelchairs. An air valve releases air from within to adjust firmness. DIMENSIONS: 20 x 15 x 15 inches. WEIGHT: 6.5 pounds.

Soft-Fall Bedside Mat (Model 911530)

The Soft-Fall Bedside Mat, model 911530, is a fall mat designed to protect individuals who are prone to falling out of bed or while entering or exiting the bed and/or who have osteoporosis. This thick, high-density foam pad is designed to be placed beside the bed and it is sized to slide under the bed between the wheels when not in use. Covered in vinyl, the pad wipes clean with a damp cloth and spray cleanser. DIMENSIONS (LxWxH): 68 x 36 x 4 inches.

Softeze Body Pillow

The Softeze Body Pillow is a body support pillow designed for use by individuals with back and neck pain. This pillow cushions the entire body and adjusts to body contours for complete support. A machine washable cover is included. DIMENSIONS: 52 x 16 inches. COLOR: The cover is available in blue.

Softeze Neck Cradler

The Softeze Neck Cradler is a cervical pillow designed to provide cervical support while it cradles the head and neck. The eggcrate foam pillow has soft peaks and valleys to provide even support and permit air circulation. A washable polycotton cover is included. DIMENSIONS: 22 x 16 inches. COLOR: The cover is available in blue or white.

Softeze No-Snore Pillow

The Softeze No-Snore Pillow is an anti-snoring pillow designed to position the head to keep airway passages open, The polyurethane foam pillow also maintains correct sleeping posture for users sleeping on their backs or sides. A machine-washable polycotton cover is included. DIMENSIONS: 24 x 19 inches. COLOR: White.

Softeze Orthopedic Pillow

The Softeze Orthopedic Pillow is a contoured pillow designed to properly align the head and neck during sleep. The pillow is filled with polyester fiber and features a raised outer edge and a concave center. Intended for side or back sleeping, the pillow has a polycotton shell and fits in a standard pillowcase. DIMENSIONS: 25 x 19 inches. COLOR: White.

Softeze Water Pillow

The Softeze Water Pillow is designed to relieve headaches, neck pain, and muscle tension. The pillow features a poly- cotton shell with a removable inner water bladder and fits in a standard pillowcase. The water bladder conforms to any head position for maximum support and it can be heated or cooled for comfort. DIMENSIONS: 25 x 19 inches. COLOR: White.

Soma Safe Enclosure

The Soma Safe Enclosure is a bed enclosure designed to prevent individuals with cognitive, emotional, or behavioral disabilities from leaving the bed without the use of restraints. This freestanding unit completely surrounds any manual or electric hospital bed with a removable headboard and footboard. The ligthweight aluminum frame is padded and the enclosure side, head, and foot panels are made of soft nylon mesh, providing security while maintaining air flow and visibility. The frame telescope

Sona Snore Pillow

The Sona Snore Pillow is an anti-snoring pillow designed for use by individuals with respiratory disabilities. Intended to keep air passages open for individuals with mild apnea and snoring, this pillow positions the user in a side-sleeping position by laying the head on top with the arm through the open recess on the underside of the pillow. It is filled with hypoallergenic SoftLoft polyester fiber fill and includes a form-fitting, removable cotton cover that can be spot cleaned. DIMENSIONS (Hx

Southpaw Belly Booster (Model 1955)

The Belly Booster, model 1955, is a bolster rolldesigned to work as an abdominal support for crawling activities for individuals with physical disabilities. Two adjustable side pieces act as stoppers so that the bolster will roll only as far as desired. When the sides stop the bolster from rolling forward, it automatically rolls backward. The Belly Booster can also support the users back or belly without rolling in order to build flexion patterns and trunk tone. It also acts as a T-stool where c

Southpaw Double Trapeze Bar (Model 4003)

The Double Trapeze Bar, model 4003, is a trapeze designed to provide a variety of developmental skill-building tasks for children with a physical disability. As a trapeze it It aids in reciprocal pumping and timing, strengthens flexion development when used for pulling to sitting and challenges motor skills of clients attempting advanced motions. As a trapeze with a double bar it provides confidence as children pull themselves up to a sitting position. DIMENSIONS: Rungs are 30 inches long and 18

Southpaw Standard Trapeze Bar (Models 4000 & 4001)

The Trapeze Bar, models 4000 and 4001, is designed to provide a variety of developmental skill-building tasks for individuals with physical disabilities. Can be used to grip, pull, sit or swing in order to develop reciprocal pumping and timing, or strengthen flexion development. The bar is made of solid hardwood and comes with two Safety Snaps (see separate entry). SIZES: Small, large. DIMENSIONS: Small is 25 inches long and 30 inches high. Large is 34 inches long and 39 inches high. Both are 1-

Southpaw Walrus Air Mat And Seal Air Mat (Models 1325 & 1326)

The Air Mat, models 1325 and 1326, is an air flotation mattress designed to provide vestibular or proprioceptive stimulation for individuals with a physical disability. It is also good for working with postural adjustments, sensory stimulation, motor planning tasks and balance activities. DIMENSIONS: Uninflated: Walrus is six by seven feet and Seal is four by seven feet. CAPACITY: Working load is 150 pounds. COLORS: Vary. GUARANTEE: One full year from shipping date.

Southpaw Wee Trapeze Bar (Model 4004)

The Wee Trapeze Bar, model 4004, is a trapeze designed to provide a variety of developmental skill-building tasks for smaller children who have a physical disability. It can be used as an overhead handle for jumping and bancing activities. Because the length of the bar is shorter than standard, it is long enough to hold on to but not cumbersome for young children. It suspends from a ceiling hook and has a "non-turning" bar. DIMENSIONS: 14 inches long, 1 inch diameter, 23 inches high. CAPACITY: W

Special Tomato Soft-Touch Therapy Roll

Special Tomato Soft-Touch Therapy Rolls are therapy and positioning rolls designed for use by children or adults with physical disabilities. The rolls are made from a soft, seamless, latex-free material that is impermeable to fluids, with a solid inner core (except for the 4 x 24 inch size). Each roll has a handle and can stand on end for storage. DIMENSIONS: 24 inches long with diameter of 4, 6, or 8 inches; 36 inches long with diameter of 8, 10, or 12 inches; and, 48 inches long with diameter

Spenco Bed Pad (Model Msp05)

The Spenco Bed Pad, model 31-115, is designed for persons confined to their bed for long periods of time. The pad covers the entire bed like a thick comforter and ensures comfort by reducing pressure on key body points. The pad is cotton/polyester on one side and has waterproof sheeting on the reverse for incontinent situations.

Spenco Foot Pillow (Model 31-559)

The Spenco Foot Pillow, model 31-559, is a pair of foot warmers and protectors designed for persons with lower extremity disabilities. The slippers are constructed of thick cotton/polyester and help relieve pressure on the foot, heels and ankle, whether a person is lying in bed or sitting in a wheelchair. SIZE: One size fits all.

Spenco Seat Pillow (Model Msp09)

The Spenco Seat Pillow, model 31-351, is a decubitus pad for persons with lower mobility disabilities confined to chairs for extended periods of time. The cotton/polyester cushion can be used on any chair, seat or car sitting surface.

Spenco Wheelchair Pad (Model 31-252)

The Spenco Wheelchair Pad, model 31-252, is a decubitus pad and armrest pad for persons using wheelchairs. The cotton/polyester covering provides protection for the arms and torso. The back of the pad is covered with waterproof sheeting.

Spine Ease Deluxe Massage Pillow (Model Sp-1)

The Spine Ease Deluxe Massage Pillow, SP-1, is a vibrating lumbar support cushion designed to reduce lower back discomfort. This portable pillow can be used anywhere - in the home, office, or car. POWER: Battery operated on 2 "D" batteries (not included). DIMENSIONS: 14.5 x 15 inches.

Spine Reliever Back Support Bed Wedge

The Spine Reliever Back Support Bed Wedge is a backrest designed for use by individuals with back pain, weakness, or injury. This wedge is topped by memory foam that contours to the user's body and enables the user to sit upright in bed or use it in two reclining positions. An adjustable neck roll is included.

Split-Rail Vinyl Bed Rail Pads (Model 401080)

The Split-Rail Vinyl Bed Rail Pads are side rail pads designed to provide protection from injury from bed rails. These pads are designed for use on divided bed rails. These foam-padded, vinyl-covered pads cover the rails and extend below and between the rail and the mattress for added protection. Velcro closures secure the pads to the rails. These pads wipe clean. DIMENSIONS: 9 x 1 x 28 inches.

Sportsplay Picnic Work Table (Models 382-510 & 382-511)

The SportsPlay Picnic Work Table is an indoor/outdoor table designed to accommodates 6 seated plus 2 wheelchairs for children in a wheelchair. The height allows most youth wheelchair arms to fit under the table. The frame is made of 1 5/8" OD galvanized pipe. DIMENSIONS: 8 feet x 30 inches x 30 inches high; 6 foot benches. WEIGHT: 135 pounds (aluminum), 200 pounds (wood).

Sportsplay Wheelchair Picnic Work Table (Models 382-513 & 382-514)

The SportsPlay Wheelchair Picnic Work Table is designed with an open leg design to provide easy access for children who are in wheelchairs. It offers extra height neccessary to allow a child in a wheelchair a comfortable fit. Up to 8 wheelchairs can fit around the table. The top is available in untreated No. 1 yellow pine or anodized aluminum. The support frame is made of 1 5/8" OD galvanized pipe. OPTIONS: You may purchase separately the legs and hardware only. DIMENSIONS: 4 x 8 feet. WEIGHT: 1

Springfield Crib

The Springfield Crib is designed for use by children with disabilities. Available in four sizes, this crib features Gatch or Gatch Trendelenberg positioning capability, Johns Hopkins handles on the drop sides for one-handed operation, clear vinyl panels on all four sides, a foam mattress with Staphchek covering, and caster wheels. OPTIONS: A four-inch thick foam mattress, a five-inch thick innerspring mattress, a pump/IV bracket, an under-crib shelf, and five-inch casters are available. DIMENSIO

Square Chair.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Chair with sides and a pommel to provide support for a child who cannot sit alone. Instructions for constructing a chair of plywood - 1 back, 1 seat and 2 sides - and a dowel for a pommel. The pommel can be made adjustable by drilling several holes it can fit; it can also be padded, as can the chair. Includes drawings and a list of materials needed. SKILLS REQUIRED: Woodworking. AUTHOR: Hartrick, J TITLE: Equipment to Make: A Guide for Parents with a C

Sta-On-Pad (Models P-101, P-102, & P-104)

Sta-On-Pads are adjustable foam positioning cushions for the legs, knees, ankles, arms, chest and back. The adjustable fire retardant foam pad with a washable cotton cover is attached to wide strap by a velcro patch. The strap is positioned around needed area and fastened with a Velcro closure. SIZES: One size fits all. DIMENSIONS: Pad-101, large for legs is 12 x 6 x 2 inches. Pad-102, small for arm/ankle is 8 x 4.5 x 2 inches. Pad-104, large for chest/back is 12 x 6 x 2 inches.

Stable Recliner Chair

CUSTOM ADAPTATION PURPOSE: To stabilize a recliner equipped with casters and elevate it for easier sitting and rising. The chair's casters caused it to move when the user leaned against it while sitting down. A wooden frame was made to fit under the chair and stained to match the upholstery. The frame included insets to hold the casters and helped to elevate the chair. DIMENSIONS: The frame is 110 millimeters high and elevates the chair by 75 millimeters. TITLE: Post Stroke Assistance. JOURNAL

Stackable Cone Raisers (Models Aa3300 & Aa3302)

The Stackable Cone Raisers are leg extenders designed to increase the height of a chair or bed to facilitate sitting or rising. Each cone has a recess in the top with a non-slip pad to securely hold bed or chair legs. Each cone supports 490 pounds and the cones can be stacked to provide additional height. DIMENSIONS: The chair cones (model AA3300), are 3.5 inches high and the bed cones, (model AA3302) are 5.5 inches high. CAPACITY: 490 pounds.

Stand-Up (Models Cka-01, Cka-02, Cka-03, Cka-04, Cka-05 & Cka-06)

The STAND-UP, models CKA-01, CKA-02, CKA-03, CKA-04, CKA-05 and CKA-06, is a standing aid and grab bar designed for use by individuals with standing, mobility or lower extremity disabilities who need assistance rising from a bed, chair or sofa. The unit has a stainless steel base with non-slip rubber edges that rests on the floor and does not require mounting to the floor, wall or ceiling. Plastic coated steel pipes with wood grain exterior finish are mounted securely on the base to form a suppo

Standard Adjustable Chair (Model T3527)

Chair adjusts to accommodate children ranging in age and size. Straight back, stabilization skis on base, footrest. Foam padded seat adjusts from 12 to 6 inches in depth. Footboard adjusts from 10.5 to 4 inches from seat. Seat height from floor 14 inches. Arm height from floor 18.5 inches. 58 inch adjustable seat belt. Chrome plated steel frame. 24 by 24 inch accessory tray with cut out available (T3531).

Standard Chair Conversion: 2: Backrest.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: High back provides more support in a classroom chair. Back for a classroom chair made of plywood to fit the width of the chair and torso height of the child. Additional head support and harnesses depend on medical advisor. Includes drawing. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Aids for Your Handicapped Child REF: London, England: Souvenir Press: p 38-39. Also available from Prentice-Hall, Englewoods Cliffs, NJ. NARIC CALL

Starlite Pillow

The Star-Lite Pillow is a cervical pillow designed for use by individuals with neck pain. The pillow comes in sizes for taller or shorter individuals and in two different densities of memory foam: semi-soft or semi-firm. This pillow is available in Regular (made with a softer foam with two different sized neck rolls); Deluxe Thin (made with Visco Elastic Gel Foam for a person 5 foot 9 inches and under); and Deluxe Thick (made with Visco Elastic Gel Foam for a person 5 foot 10 inches or taller).

Stay Warm Cherry Stone Thermal Pillow

The Stay Warm Cherry Stone Thermal Pillow is a hot or cold pack designed for use by individuals with arthritis or pain. This therapeutic thermal pillow is filled with cherry stones, packed in a one-hundred-percent cotton pouch. The pillow can be heated in a microwave for 3 minutes or in a conventional oven for 15 minutes for a long lasting, slightly moist penetrating heat. The pillow molds to the user's body and caresses away aches and pains, while the natural moisture in the stones gives off a

Stay Warm Thermotherapy Cherry Stone Warming And Cooling Neck Pillow

The Stay Warm Thermotherapy Cherry Stone Warming and Cooling Neck Pillow is a hot or cold pack and cervical pillow designed for use by individuals with arthritis or neck, shoulder, or upper back pain. This specially shaped pillow with cherry stone filling wraps around the neck to give localized comfort. After three minutes in a microwave or 15 minutes in a conventional oven, the pillow provides long lasting, penetrating heat, which is quickly conducted to the area of discomfort as the pillow mo

Steady Riser

The Steady Riser is a reclining chair with seat lift for users who have difficulty being seated or getting up from a sitting position. The chair has a 250-pound lift capacity and is controlled by a paddle switch. When the switch is pressed forward, the entire chair lifts the user to a standing position; when the switch is pressed backward, the chair returns to a sitting position or continues moving back to a fully reclining position. The chair frame is made of oak, covered with foam, and upholst

Step Stool With Handrail (Model 601)

The Step Stool with Handrail, model 601, is a step stool designed for use by individuals with balance disabilities, caregivers, or those of short stature. This single-step stool has a nylon-coated tubular steel frame, fitted non-slip ferrules, and a fluted, rubber-covered wooden top. The stool has a high vertical handrail. DIMENSIONS: The height of the hand rail from step stool top is 32.5 inches (82 centimeters). The height of the handrail from the floor is 41.5 inches (105 centimeters). The st

Step Stools (Models 600 & 600S)

The Step Stools are step stools designed for use by caregivers or those of short stature. These stools have nylon-coated tubular steel frames, fitted non-slip ferrules, and fluted, rubber-covered wooden tops. OPTIONS: Both models are available with extra tall handrails. DIMENSIONS: Model 600 is 9 inches high; model 600S is 6 inches high. CAPACITY: 140 kilograms (22 stones).

Stepladder

CUSTOM ADAPTATION PURPOSE: To enable an individual with arm weakness following a fracture to reach storage boxes on a bedroom cupboard shelf. The stool needed to be small enough for use in a small bedroom, light enough to be moved as needed, and have a means of supporting the box taken from the cupboard. A two-step stool was built of 12 millimeter hoop pine plywood. The lower step has a routed slot on each side and slides out like a drawer along dowels, enabling it to be tucked away when not i

Stockerston Blanket Cradel (Model 137)

The Stockerston Blanket Cradle, model 137, is a blanket support designed for use by individuals at risk for pressure sores/ulcers. Constructed from plastic coated steel tubing, this device has closed and open ends, the latter being placed between the mattress and bed base. The weight of the bed clothes is supported, keeping them clear of the patient for ventilation and pressure relief. DIMENSIONS (WxHxL): 16 x 18 x 30 inches. COLOR: White.

Stockton Age Appropriate Youth Bed

The Stockton Age Appropriate Youth Bed is an adjustable bed designed for children and young adults with disabilities who are not at risk for falling or climbing over the siderails. Available in a fully electric or manually adjustable models, this bed offers Gatch Trendelenberg positioning, Hi-Lo adjustment, and full-length crib-style rails. Available in three sizes, this bed comes standard with an innerspring mattress with Staphchek covering and caster wheels. DIMENSIONS: This bed is available i

Stop Leak Gel Flotation Mattress

The Stop Leak Gel Flotation Mattress is a mattress surface overlay designed to reduce the risk of decubitus ulcers. The pad features five internal partitions to eliminate motion and increase stability. The mattress is made of vinyl and nylon material developed to prevent punctures from becoming large holes. A powdered gel concentrate and water are put in the mattress and mixed to form the gel. If mattress does puncture the gel beads up to prevent leakage.

Stress Buster Massaging Footrest (Model 2119)

The Stress Buster Massaging Footrest, model 2119, is a footstool and foot massager designed for use by individuals with lower extremity disabilities. This massaging footrest features alternating rollers for a relaxing foot massage. The adjustable tilt encourages frequent position changes during prolonged desk work to help reduce leg pressure and improve circulation. The unit has a steel frame with a plastic footpad. DIMENSIONS (HxDxW): 5 x 20.5 x 20.25 inches. WEIGHT: 7 pounds. COLOR: Black foot

Stress Ease Massage Pillow (Model Se-1)

The Stress Ease Massage Pillow, SE-1, is a vibrating pillow designed for pressure activated massage control to the back. This square pillow can be used in the home, office, auto, or anywhere. POWER: Battery operated with 2 "D" batteries (not included). DIMENSIONS: 13 x 13 inches.

Stress-Ease Pillow

The Stress Ease Pillow is a cervical pillow designed to provide head and neck support. The pillow has a concave center area designed to support the head while sleeping. Multi-sized cervical lobes help provide proper cervical alignment and support to the head and neck. The pillow is made of 100 percent hypoallergenic polyester fiber with a polyester and cotton cover. The fabric cover is tightly woven to filter out bacteria, mold, and mildew odors. This pillow fits most standard pillow cases. DIME

Stress-Ease Support Pillow (Model K10370)

The Stress-Ease Support Pillow, Model K10370, is a contoured pillow developed for persons with head, neck or shoulder disabilities. This therapeutic pillow features a raised outer edge and a concave center to properly support the head and neck. Adaptable for sleeping on the back or side, it correctly aligns the spine for a trouble-free sleep and reduces muscle tension and stress. The pillow is made of polyester, is machine washable and fits any standard size pillow case.

Stretch Out Strap

The Stretch Out Strap is an exercise band designed for use by individuals with arthritis, mobility disaabilities, neurological disabilities, and other physical disabilities. This exercise strap is double stitched in a series of loops for the hands and feet to enable the user to stretch independently and progressively. The device can also serve as a rope ladder or a leg lifter. The Strap is available alone or with an exercise videotape demonstrating 28 stretches for different areas of the body.

Sturdi Sides (Models 110 & 112)

Sturdi Sides (models 110 and 112) are chrome-plated half side rails that can easily be installed with clamps. The rails have 3 height positions. Two styles are available for single, double or queen sized beds: hospital or home. An extension adapter is available for king size beds.

Sturdy Heavy Load Bedside Table

CUSTOM ADAPTATION PURPOSE: To provide a sturdy, heavy load table accessible from an individual’s bedside for a person with quadriplegia. The table has a U-shaped base and post made from square steel, with 3-inch castors on the four points of the U. Attached to the top of the post is a rectangular square steel frame on which rests a wooden table top with a lip to stop items from falling off. The wooden top has two handles on one side so that an individual can move it easily. The table is useful

Style Saver (Model 100)

The Style Saver, model 100, is a contoured pillow designed for use by indiviuals with neck pain or arthritis. This contoured pillow has a neck cutout and a satin case. COLOR: Blue, pink, or ecru.

Style Saver Tension Ease Satin Pillow (Model 101)

The Style Saver Tension Ease Satin Pillow, model 101, is a contoured pillow designed for use by individuals with neck and shoulder pain or arthritis. This contoured pillow incorporates a nek roll and has an acetate satin case. COLOR: Blue, pink, or ecru.

Super Seat (Model R455), Seat Cushion (Model R456), & Super Mattress (Model R457)

The Super Seat, Seat Cushion, and Super Mattress, are eggcrate foam products designed to allow better weight distribution and air circulation for prevention of decubitus ulcers. The materials are flame retardant and lightweight. DIMENSIONS: The cushion (model R456) is 17 x 17 x 4 inches; the Super Seat (model R455) measures 36 x 18 inches; and the mattress (model R457) is 36 x 74 x 1.75 inches.

Superior Footrest

The Superior Footrest is a footstool designed for use by individuals with lower extremity or back disabilities. This unit tilts 45 degrees forwards and back with the movement of the user's feet for relaxing exercise while sitting. The unit is non-metallic and fits in a briefcase or backpack. Its legs fold for storage and carrying. DIMENSIONS (HxDxW): 3.5 x 7 x 15 inches; when folded, 0.75 inches high. COLOR: Transparent, blue, green, brown, pink, or gray. WARRANTY: 30-day return in original pack

Superpole & Superpole Bariatric

The SuperPole Transfer System is a transfer aid designed to assist individuals with mobility disabilities. Available in standardand bariatric models, this modular system may be used beside the bath, toilet, bed, or chair and offers sturdy support. Made of rigid heavy-gauge steel, the pole features a slip-resistant rubberized foam grip, a low-profile base, and a rubber friction pad on the top and floor anchor plate to prevent twisting during use. The system is available with the pole only, with a

Superpole Traveler

The SuperPole Traveler is a portable transfer aid designed for use by individuals with balance, walking, or mobility disabilities. Central to the system is a floor-to-ceiling vertical steel grab bar, which provides a secure structure that can be installed in minutes between a floor and ceiling. The unit installs by turning the jackscrew at the bottom of the pole. The screw expands the pole to create enough tension between the floor and ceiling to hold the pole secure. Rubber pads on the ceiling

Supersaver Ada Picnic Table (Models Bdt8Hdp & Bdt8Hdsm)

The SuperSaver ADA Picnic Table is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This long, rectangular table has centered seats on both sides and space for wheelchair access at each end. The tabletop and seats are made from steel with a thermal-fused plastic coating, and the frame is powder-coated galvanized steel. The table is available in a portable version (model BDT8HDP) or a surface- mounted version (model BDT8HDSM). DIMENSIONS

Support Rail

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom modification of support rail on an adjustable bed for a mother with multiple sclerosis. The individual bought an adjustable bed so she could raise the head to sit up comfortably and breastfeed her son. She had a support rail under the mattress of her old bed to help her turn over and get safely in and out of bed, but it was not stable enough when used in the same way with the new bed. A new rail was custom-made and designed to be m

Swing-Away Table

The Swing-Away Table is an accessible table designed for use by individuals with mobility disabilities. This height-adjustable table has a tubular steel base that sides under a bed or chair for stability; a braclet to grasp a chair arm for additional security. The tabletop swings a full 360 degrees for proper positioning as needed or to move out of the way for transfers. DIMENSIONS: The height adjujsts from 21 to 33 inches and the top of the table is 18 inches in diameter.

Swivel Chair For Dining Table

CUSTOM ADAPTATION PURPOSE: To provide a chair that allows a person to swivel into position at a dining room table. Cut the legs of a barstool with a swivel seat to a height that allows the resulting chair to fit under a dining table. Using wood screws or nails, attach a plywood base to the four legs of the chair for stability. If necessary, place an additional cushion on the seat to bring the person to the proper height for eating. MATERIALS: Bar stool with swivel seat; plywood; nails or wood s

Synthetic Sheepskin Bed Rail Pads (Model 402010)

The Synthetic Sheepskin Bed Rail Pads, model 402010, are side rail pads designed for use with hospital bed rails. Made of health-care grade, high-pile synthetic sheepskin, these pads cover the sides and top of the rails. The launderable, hypo-alergenic pads secure at the top with heavy-duty snaps and at the bottom with ties. DIMENSIONS: 18 x 60.

Synthetic Sheepskin Pads

Synthetic Sheepskin Pads are mattress pads designed to prevent pressure sores for people who are in bed for extended periods. These launderable pads are soft and permit air circulation beneath the user. DIMENSIONS: These pads are available in 30 x 24 inches, 30 x 40 inches, 30 x 60 inches, and on rolls of 30 x 360 inches.

T-Foam

T-Foam is a foam material designed to eliminate pressure points and absorb shock and vibration. This material is used to make flotations pads, mattresses, cushions, and padding (see separate entries). T-Foam flows to give fluid-like fit and support under body presure and heat so that pressure is evenly distributed. This material becomes firmer when subject to sudden impact and absorbs up to 90 percent of sudden impacts and vibration. When released after conforming to an impression, T-Foam return

Table Attachment.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Table attachment to allow a child to sit with the rest of the family at meal times. Plywood board 12 by 24 inches with a semicircle cut to fit against the child. It is fastened to the table or desk with G clamps. Includes drawing and photograph. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Aids for Your Handicapped Child REF: London, England: Souvenir Press: p 56-57. Also available from Prentice-Hall, Englewoods Cliffs, NJ. NARIC

Table For Use In Bed

CUSTOM ADAPTATION PURPOSE: To provide a custom adaptation for a table for use in bed to hold remote controls for an individual with quadriplegia. A small table with a small cushion at the based filled with polystyrene beads was made. The cushion is medium stuffed so that it is very stable and will stay in the position it is pushed into. A table top was made from a plywood base with a lip around all four sides to prevent items from falling off. A piece of non-slip mat was added to the table but

Table To Facilitate Donning Stubby Prostheses By Bilateral Above-Knee Amputees.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Using short stubby prostheses in elderly bilateral above-knee amputees has been advocated by several experts. A table was designed to facilitate donning stubby prostheses. Table is made of 3 sheets of 3/4" plywood 18 inches square. The table measures 18 inches in height, width, and depth. This height was selected to facilitate the table's use from the patient's wheelchair or bed. Across the top of the table is a horizontal platform with two cutout slot

Table-Mate Ii

The Table-Mate II is an accessible height-adjustable tilt top work table designed for use by individuals with mobility disabilities. This portable table adjusts in height and angle, adjusts for chair and body size, and folds for storage. This table holds up to 50 pounds and can serve as a student desk or workstation or be used for reading, hobbies, puzzles and games, and art activities. DIMENSIONS: The table top is 20.75 x 14.75 inches and the distance between the legs is 18.25 inches. The heigh

Teen / Adult Ball Chair (Model 678)

The Teen/Adult Ball Chair, model 678, is a posture chair designed for office use by individuals with balance disabilities or back problems. This ball-shaped chair is designed to take pressure off the spine, reduce muscle tension, improve balance, and strengthen the torso. Features include an adjustable back rest and a latex free ball that can be inflated to the height of the user. DIMENSIONS: The ball is 22 inches. CAPACITY: 600 pounds. COLOR: Color may vary.

Temper Foam Hospital Bed Mattress

The Temper Foam Hospital Bed Mattress is a foam mattress surface designed for use by individual with orthopedic disabilities. The mattresseses are available with or without a Staph Chek nylon mattress cover. This lightweight foam mattress flows under pressure to a fluid-like support that distributes weight evenly to reduce pressure points.It also softens under pressure, temperature increase, and/or humidity and transfers moisture away from the body. Highly resilient, the foam slowly returns to i

Tempur-Cloud Luxe

The TEMPUR-Cloud Luxe is a foam mattress designed for use by individuals with arthritis or back pain. This soft mattress provides the user with proper spinal support to fully relax and sleep. Its TEMPUR-Feel material provides highly conforming support. The mattress has a thick TEMPUR-ES comfort layer, a TEMPUR-HD support layer, a dual-core base layer, a non-skid bottom, and concealed cross-braced handles. The removable, washable cover has stretch fabric on top and bottom with MicroSuede sides. A

Tempur-Comfort Pillow

The TEMPUR-Comfort Pillow is a pillow designed for use by individuals with arthritis of the neck and shoulders. The pillow is made from a TEMPUR material sleeve filled with shapeable TEMPUR micro-cushions that adjust to the body temperature and weight of the user's head, neck, and shoulders, providing support that allows muscles to fully relax for more restful sleep. The pillow is medium firm and is recommended for use with people who sleep on their back, side, or stomach. It has a removable and

Tempur-Neck Pillow

The TEMPUR-Neck Pillow is a contoured pillow designed for use by individuals with arthritis of the neck or back, or other neck or back pain. Intended for people who sleep on their back, this firm pillow provides a more controlled sleep posture to address the sleeper's neck or back pain. The contoured shape supports the curve of the sleeper's head, neck, and shoulders for comforting therapeutic support. The contoured shape helps align the sleeper's head, neck, and shoulders for more relaxing and

Tempur-Symphony Pillow

The TEMPUR-Symphony Pillow is a contoured pillow designed for use by individuals with arthritis of the neck and shoulders. This dual-sided, medium-firm pillow has a gently arched side for back sleepers, and a flatter side for side and stomach sleepers. It supports the sleeper's head, neck, and shoulders, allowing muscles to fully relax for more restful sleep. Made of a softer formula TEMPUR, the pillow maintains its contoured shape for correct support. The 100 percent polyester cover is removabl

Tendercloud Static Air Mattress Overlay (Model Aqtc8035)

The Tendercloud Static Mattress Overlay, model AQTC8035, is an air flotation mattress surface to help prevent or relieve pressure sores. It has 240 flotation cells and chambers that self-adjust for pressure reduction. It attaches to standard mattress with heavy duty straps and is double-sealed with heavy gauge vinyl to prevent air loss. DIMENSIONS (WxL): 36 x 75 inches. CAPACITY: 300 pounds. WARRANTY: 90 day limited warranty.

The Bed-Bar

The Bed Bar is a sturdy support rail designed to help people get in and out of bed for individuals with little mobility. It can be used by anyone who has trouble rising from their bed including those recovering from surgery, people with back injuries or disabilities, people who have joint replacements, stroke, arthritis, multiple sclerosis, or Parkinson's Disease, and children requiring mobility assistance. The Bed Bar promotes a restraint free environment and allows clients to maintain independ

The Hugster

The Hugster is a pillow designed for a variety of uses such as nursing, pregnancy, infant support, TV/reading, sleeping and back support. It is horsesoe shaped with a velcro fastener that hugs the user. This pillow is made of 100% polyester filling with a cover that is 100% cotton.

The Pillow & The Pillow Jr.

The Pillow is a contoured foam pillow designed to support the head, neck, and shoulders to maintain spinal alignment. One side has a round cervical support, the other side has a wedge-shaped cutout in the center to support the neck in a natural position while supporting the sides of the head. The Pillow Jr. offers the same features in a smaller size. DIMENSIONS: The Pillow is 14 x 25 inches and the Pillow Jr. is 9 x 19.5 inches.

The Total Pillow

The Total Pillow is a pillow designed for use by individuals with neck pain or stiffness or lower back discomfort. This ergonomically designed, sectioned round pillow can also be used for support of the knee and ankle. The user can fold or twist and lock this pillow into any position for comfort and support while sitting at home, or traveling in a car or plane. GUARANTEE: 30-day money back guarantee.

Thera Cushion

The Thera Cushion is a cervical roll pillow designed to maintain proper neck posture and align the vertabrae to relieve nerve root pressure and muscle spasms. The center of the polyester fiber-filled pillow is concaved or flattened and the ends reinforced to bulge and provide neck support. Polyester fiber filled. OPTIONS: A zippered cover in polycotton or satin is available, DIMENSIONS: 18 inches long x 7 inches in diameter. COLOR: The pillow is white. The polycotton cover is available in white

Thera P Anti Snoring Cradle Pillow

The Thera-P-Anti Snoring Cradle Pillow is an anti-snoring pillow designed for use by individuals with respiratory disabilities. This is shaped foam pillow with cervical support on long edges. Features include an anti-snoring bar to discourage sleeping on one’s back. Instead it encourages side sleeping to help keep nasal passages open and establish proper posture of the head while sleeping.

Thera-P-Support Cradle Pillow & The Thera-P-Petite

Thera-P-Support Cradle Pillow & Thera-P-Petitet Cradle Pillow is a cervical support pillow designed for use by individuals who experience neck tension and back pain. The Support Cradle Pillow is designed to help establish correct posture while sleeping on side or back, and the Petite Cradle Pillow is designed for women and children with small necks and shoulders and one-inch smaller the cervical support areas on both sides. Both pillows are made of non-allergenic foam with cotton cover that

Theradapt Posture Chair With Lumbar Support

The TherAdapt Posture Chair with Lumbar Support is a posture chair for preschool/primary or intermediate aged children. The Posture Chair positions child in a semi-kneeling position with forward tilting seat, keeping the back straight and the pelvis in proper position. The seat is height adjustable with dual adjustable knee pads. The chair has front castors. SIZES: Preschool/primary fits children 3 to 4 feet tall; Intermediate fits children 4 to 5 feet tall. OPTIONS: Velcro straps, seat belts, t

Theraflo 2000

The Theraflo 2000 is a bariatric air flotation mattress and alternating air pressure mattress surface designed to treat and prevent pressure sores for individuals at risk for decubitis ulcers and pressure sores. Features includes a high performance blower that allows utilization for both standard and bariatric width mattresses with one power unit for people weighing up to 1,000 pounds. The Theraflo is made of strong durable material, and it is intended for homecare, long-term care, and acute-car

Therapeutic Pillows

Assorted cushions for lumbar or cervical support. Lumbar cushion with saddle hug wings or inverted edges, fits bench or bucket seats. Small dorsi-lumbar cushion 15 by 15 inches square. Large dorsi-lumbar cushion 15 by 19 inches. Lumbar cushions are firm foam with velvet covers. 21 inch twin lobe cervical pillow with smooth or convoluted texture, medium soft foam. Cervical roll 18 by 6 1/2 inches, medium soft polyester fiber. Zippered covers. Assorted colors.

Therapulse

TheraPulse is a motorized bed with Pulsating Air Suspension Therapy designed for use by individuals with pressure ulcers or who are at risk for pressure ulcers. Pulsation combined with advanced pressure relief provides aggressive therapy for prevention and treatment of pressure ulcers. The GORE-TEX fabric cover sheet provides moisture-vapor transfer, while serving as a barrier to liquid and bacteria, helping the user stay dry and comfortable. POWER: 2 to 12 amps. DIMENSIONS (HxLxW): 36 to 47

Therapulse Atp

TheraPulse ATP is a motorized bed with Pulsating Air Suspension Therapy designed for use by individuals with pressure ulcers or who are at risk for pressure ulcers. The TheraPulse ATP utilizes an automated, programmable wound care turn to assist with the turning protocol and pressure relief and a Four Zone, air suspension system for enhanced pressure reduction. The GORE-TEX fabric cover sheet provides moisture-vapor transfer, while serving as a barrier to liquid and bacteria, helping the user s

Therapy Balls (Models 1311-1315 & 1361-1366)

Therapy Balls, models 1311-1315 and 1361-1366, are designed for therapeutic exercise for individuals with a physical disability. They can be used with clients in almost any developmental position for an endless variety of activities for flexion, extension, equilibrium reactions, and postural adjustments. The balls are made of soft heavy-duty molded vinyl and can be soft inflated using the Inflator/Deflator Pump (see separate entry) or firmly inflated to full diameter using the Air Station (see s

Therashape Group Table

The Therashape Group Table is a therapy table designed for use by individuals who use wheelchairs or in activities requiring close proximity to the table. The table is curved with cut out areas to accommodate three individuals. The table is height-adjustable using hand knobs and the steel powder-coated legs feature knob-style column locks and six adjustable base levelers. DIMENSIONS: The table adjusts in height from 23 to 33 inches. Each of the cut-out areas is 18 inches wide x 10 inches deep. T

Therashape Table

The Therashape Table is a therapy table designed to be used as a treatment, feeding, or activity table for any healthcare setting. This table accomodates four to five individuals. Three adjustable legs provide seating room and access, and offer height adjustments. The legs feature knob-style column locks, 5 adjustable base levelers, and a steel column. DIMENSIONS (LxW): The table top measures 72 x 28 inches. Table height can be adjusted from 23 to 33 inches. COLOR: Maple-finished high-pressure l

Therion Magnetic Travel Mattress Pad

The Therion Magnetic Travel Mattress Pad is designed individuals with disabilities that may cause poor circulation and for persons with heightened anxiety as it is meant to improve blood circulation and oxygenation, and minimize stress for the user. 242 deep penetrating all natural magnets provide therapeutic benefit to the user. Portable. Anisotropic Ceramic magnet. 5 inch magnet penetration depth. Travel Pad is NOT washable but it can be spot cleaned with mild soap and damp cloth. Magnetic the

Thermoflex Pillow

The ThermoFlex Pillow is designed for use by individuals with neck pain, injury, or disability. Made of hypo-allergenic, heat-sensitive, Visco-elastic foam, the pillow is firm initially, but it becomes pliant with the transfer of body heat. The pillow re-shapes itself to the user's movement for custom support. Other standard features include integrated lobes for support beneath the neck and channels for even air flow. The pillow fits standard pillow cases and includes a washable, custom-fit cot

Thirteen Piece Modular Positioning Set (Model 13-011)

The Thirteen Piece Modular Positioning Set, model 13-011, is a set of large foam shapes designed to be used interchangeably and in combination to position children and adults for therapy sessions, play or work activities, in a wheelchair, or for nighttime positioning. The pieces are made of high-density foam cover with waterproof and cleanable vinyl. The set includes cylindrical rolls and 8 rectangles in a variety of sizes. DIMENSIONS: Rolls are 7 x 7 inches, 5 x 20 inches, 8 x 20 inches, 5 x 5

Thru-View Vinyl Bed Rail Pads (Models 401015 & 401045)

The Thru-View Vinyl Bed Rail Pads are side rail pads designed to provide protection from injury from bed rails. These pads feature clear vinyl plastic windows to reduce the feeling of isolation.These foam-padded, vinyl-covered pads cover the rails and extend below and between the rail and the mattress for added protection. Velcro closures secure the pads to the rails. These pads wipe clean. DIMENSIONS: Model 401015 is 60 inches long and model 401045 is 72 inches long.

Tilting Footrest

The Tilting Footrest is a footstool designed for use by individuals with lower extremity or circulatory disabilities or back pain. Designed to ease neck and leg tension, the ergonomic footstool elevates and supports the foot in a tilting position to ease neck and leg tension and stimulate lower body circulation. The unit consists of a board with ribbed rubber mat mounted on a steel frame with chrome tubing. DIMENSIONS: The footrest is 3 inches high. WEIGHT: 7 pounds. COLOR: Board and rubber mat

Tip 'n Grip Tray

The Tip 'N Grip Tray is a non-slip tray designed for use by individuals with balance, mobility, or upper extremity disabilities. The non-slip surface ensures that items placed on the tray will not slide under normal use. Available in rectangular or oval styles, the tray is dishwasher safe and the non-slip surface is designed not to wear off. DIMENSIONS: The rectangular tray is 18 3/4 x 14 7/8 inches and the oval tray is 22 3/4 x 14 3/4 inches. COLORS: Rectangular tray is cream color. Oval tray i

Toasty-Toes Deluxe Ergonomic Heated Footrest

The Toasty-Toes Deluxe Ergonomic Heated Footrest is a footstool designed for use by individuals with lower extremity or circulatory disabilities. This electric foot warmer can be positioned flat on the floor, angled slightly, or angled up to 5 inches for comfortable use at a desk or with an easy chair. The unit also offers three different heat settings. DIMENSIONS: 12 x 18 x 5 inches. WEIGHT: 5 pounds. COLOR: Black-on-black embossed design.

Toespace Adjustable Blanket Support Lift Bar

The ToeSpace Adjustable Blanket Support Lift Bar is a blanket support designed to create a free space at the end of the bed between the covers and the mattress to allow free foot movement. The frame is inserted between the mattress and box spring at the foot of the bed to provide a stable base for the frame. The top bar is then raised to the desired height. No tools are required for assembly. SIZES: Standard and X-Large. DIMENSIONS: Height is adjustable up to 29 inches. The width is 21 inches

Total Comfort Lounger

The Total Comfort Lounger is a back rest designed for use by individuals with physical disabilities. This back rest has a polyurethane foam frame, a padded back pillow, cushioned armrests, and a height-adjustable neck support, enabling the user to be supported in a sitting position in bed. The poly/cotton twill cover is hand washable.. DIMENSIONS (WxD): 27 x 21 inches. COLOR: Natural.

Totalcare P500 Surface

The TotalCare P500 Surface is a hospital mattress and decubitis pad designed for use by individuals at risk for developing pressure sores. This antimicrobial wound care surface reduces pressure, shear, friction, and moisture, the four main causes of pressure ulcers. Weight-based pressure settings automatically and continuously distribute the patient's weight. The surface uses Microclimate technology to remove excess heat and moisture for cooler, dryer skin. A FlexAfoot mechanism helps prevent he

Totalcare Spo2Rt Bed

The TotalCare Spo2rt Bed is a motorized bed designed for use by individuals recovering from burns or wounds or individuals with severe physical disabilities. This critical care bed includes Therapy-On-Demand modules that offer continuous lateral rotation therapy (CLRT) and percussion and vibration therapies. This helps mobilize secretions and other bodily fluids to aid in the prevention and treatment of pulmonary complications related to immobility. A head of bed alarm sounds automatically when

Trader Picnic Table - Wheelchair Accessible (Models Tada-1700 & Tada-1800)

The Trader Picnic Table - Wheelchair Accessible is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This rectagular table has benches on two sides with space for a wheelchair at the end. The table has a recycled plastic top and benches with a heavy duty powder coated steel frame. The table is available with surface or inground mounting. DIMENSIONS (HxLxW): Table top is 33 x 72 x 30.37 inches (model TADA-1700) or 33 x 96 x 30.37 inches (m

Tranquility Slimline Peach-Sheet Care Pad

Peach colored care pad has tape tabs in four corners to prevent sliding, and a moisture-proof backing. Measures 21.5 inches by 32.5 inches. Underpad provides better skin dryness and inhibits growth of bacteria.

Transfer Handle, The (Models 2001, 2025, & 2025H)

The Transfer Handles are transfer aid designed to assist people with mobility disabilities in transferring to and from a bed and to assist with in-bed mobility. Model 2025 features a steel handle attached to a bed board which slides between the mattress and the box springs. Shaped in an inverted U, the handle also has a second, lower bar for added stability in standing and greater in-bed mobility. Model 2025H is similar to model 2025, but is designed specifically for use with hospital-style beds

Transfer Hoist

The Transfer Hoist is a powered seat transfer lift designed to enable a person with a disability to transfer independently from a wheelchair to a bed. The device consists of a steel crane which swivels around from behind a bed. The crane includes an electric winch, a remote switch, and a harness. The crane has mounting points on the floor and the ceiling. The user fits into the sling-type harness, then operates the winch to be lifted and transferred. PROTOTYPE DEVELOPMENT: Designed by Frank Hemi

Transfer Master Comfort Beds (Models 318 & 315)

The Transfer Master Comfort Beds are motorized beds designed for use by individuals with spinal cord injury or circulatory, respiratory, and severe physical disabilities. Both models have orthopedic mattresses, head and foot adjustments, and safety thermal overload protected motors. Model 318 also has dual massage with multiple settings. POWER: Uses standard alternating current (AC) with optional battery backup. OPTIONS: Half- and full-length rails and a memory foam overlay. SIZES: Twin, Double.

Transfer Master Companion (Model 314, 316, & 317)

The Transfer Master Companion is a mototrized bed designed for use by individuals with circulatory, respiratory, and severe physical disabilities and spinal cord injuries. All models have an adjustable head and foot, a floor illuminating night light, and an orthopedic mattress with a choice of vinyl or cloth covers. POWER: Uses standard alternating current (AC) with an optional battery backup. OPTIONS: Half- and full-length bed rails, head and foot boards, and a fracture frame. DIMENSIONS (LxW)

Transfer Master Original Series (Models 302, 301, & 305)

The Transfer Master Original Series is a motorized bed designed for use by individuals with severe physical disabilities, spinal cord injury, lower extremity disabilities, mobility disabilities, respiratory disabilities. All models have head and foot adjustments; orthopedic mattresses with a choice of cloth or vinyl covering; safety thermal overload protected motors; a choice of half- or full-length rails; dual massage; big button or joystick controls; and furniture look with powder-coated stee

Transfer Master Spirit Series (Models 304-B, 304-O, 304-S, & 304-T)

The Transfer Master Spirit Series is a motorized bed designed for use by individuals with spinal cord injury or severe physical disabilities. All models have a head that adjusts from horizontal to 90 degrees; an adjustable foot with three settings; high-low adjustability; half rails mountable at the head or the foot; head- and footboards; and, hand control operation. Model 304-B is the basic model with a vinyl-covered mattress. Model 304-O has a cloth orthopedic mattress. Model 304-S is equipped

Transfer Master Valiant Series (Model 311, 312, & 313)

The Transfer Master Valiant Series are motorized beds designed for use by individuals with circulatory disabilities, respiratory disabilities, lower extremity disabilities, mobility disabilities, spinal cord injuries and severe physical disabilities. All models are head, foot, and hi-low adjustable, with Trendelenburg and Reverse Trandelenberg settings available. Other features include single massage with a 15 or 30 minute timer; a floor illuminating night light; a call buzzer; orthopedic mattre

Trapeze With Floor Base (Model 7714)

Floor base for fixed trapeze bars provides free standing support for bar. Octagonal steel tubing. Offset fixed trapeze unit. Base length 40 inches, height 38 inches, width 32 inches or 4 inches folded, weight 24 pounds.

Travel Handles

Travel Handles are grab bars for bed designed for use by individuals with lower extremity, mobility, or balance disabilities. Each unit is comprised of a handle with two extensions that attach with push-in snap-buttons. The extensions slide under the mattress to hold the handle in place. Handles are made from cushioned vinyl over an aluminum core. WEIGHT: 1.5 pounds.

Tri-Core Cervical Pillow

The Tri-core Cervical Pillow is designed for use by individuals requiring support of the neck while sleeping. The pollyfill pillow features a trapezoidal pocket that cradles the user's head while lying on the back or side, providing support for the cervical curve in the neutral position. The non-allergenic pillow fits standard pillowcases and is machine washable. DIMENSIONS: 16 x 24 inches.

Tri-Core Cervical Pillow-Standard

The Tri-Core Pillow is a cervical pillow designed for people with joint strains, arthritis and neck injuries. It's designed for both back and side sleepers. The Tri-Core pillow encourages neck and back muscles to adjust to their proper position to alleviate pain.

Tri-Flex Ii

The Tri-Flex II is a motorized bed designed for use by individuals with severe physical disabilities or spinal cord injury. This heavy- duty bed includes a three-piece interchangeable mattress and a sliding surface that expands or contracts for a wider or narrower surface width. Users can get in and out of the bed through the side or through the foot of the bed. Other features include caster wheels, rotating side rails, one button Trendelenberg functions, molded plastic head and foot boards, and

Triangle Chair

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Triangle chair to provide back and side support and to keep a child's legs apart. Describes chair made of 3 quarter-circles of plywood fastened together to make seat and support sides; 2 dowels are fastened to the front of the seat to keep the child's legs separated. This can be used on the floor or fastened to a standard chair. SKILLS REQUIRED: Woodworking. AUTHOR: Finnie, N R TITLE: Handling the Young Cerebral Palsied Child at Home REF: New York: E P

Tripp Trapp Chair

The Tripp Trapp Chair is an adjustable positioning chair designed to fit all people, infants through adults, with physical and neurological disabilities. Users should have some head control for maximal use since no specific head support is built onto the chair. The seat depth, back support, and foot support are adjustable and functional at any standard table. The wood construction of the chair allows possible modification for increased head support. OPTIONS: 3-inch abduction pommel, foot placeme

Tuckable Underpads

Tuckable Underpads are bed underpads designed for use by individuals with incontinence. These disposable pads are designed to protect bed linens and have "wings" to enable the pads to be tucked in to provide a wrinkle-free surface and eliminate bunching, shifting, or adhering to the skin. These pads absorb 1,000 cubic centimeters (cc) of fluid. DIMENSIONS: 27 x 70 inches.

Tumble Forms 2 Tadpole Pediatric Positioner (Model 4772T)

The Tumble Forms 2 Tadpole Pediatric Positioner, model 4772T, is designed specifically for early intervention programs serving infants from birth to three years of age with cerebral palsy, motor delays, or other motor dysfunctions. The Tadpole allows the therapist to position the child/infant in prone, seated, postural drainage, and side-lying positions. The unit includes the base, one half roll with lateral supports, a half roll, a positioning strap, and a tray with mirror. It also comes comple

Tumble Forms 2 Universal Grasshopper System (Model 4775)

The Tumble Forms 2 Universal Grasshopper System, model 4775, is a body positioner system designed for use with children and adults with physical disabilities. The Grasshopper consists of 17 different shapes and forms for adaptive support. Among the positions that can be incorporated into the therapeutic program using this system are side-lying, prone, supine, long-leg sitting, and log-roll sitting. By attaching the Tumble Forms log to the base, the Grasshopper becomes an active therapeutic treat

Typing Table For Wheel Chair.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Provides typewriter or other table at proper height for wheelchair user. One-legged plywood table measuring 15 inches by 22 inches by 1/2 inch is reinforced with 2 wooden braces. COMMENTS: Submitted by Physical Medicine Rehabilitation Service, Veterans Administration Hospital, Richmond, Virginia. SKILLS REQUIRED: Woodworking. AUTHOR: New York University Bellevue Medical Center Institute of Physical Medicine and Rehabilitation TITLE: Typing Table for Wh

U Base Overbed Table (Models 11620 & 11630)

The U Base Overbed Table, models 11620 and 11630, is an overbed table designed for use by individuals with mobility or severe physical disabilities. It has a four point, U-shaped base with four dual wheel nylon casters, two of which lock. The U-shaped base allows this table to fit in areas with restricted space. The table also has spring-loaded height adjustment. DIMENSIONS (LxW): 26.38 x 15.25 inches (base); 30 x 15 inches (tabletop). The height of the table adjusts from 26.75 to 43.25 inches.

Ultra Adjustable Chair (Model T3532)

Straight back adjustable chair for children with footrest. Stabilization skis on base prevent tipping. Back height adjustable by sliding it up and down on seat posts. Seat depth adjusts 6 to 12 inches. Seat width 12 inches. Footboard adjusts 4 to 10.5 inches in depth and adjusts in height. Made of chrome plated steel with vinyl coated foam seat and back. Accommodates children up to 48 inches tall. Accessories available: adjustable lateral supports (T3528), adjustable pelvic supports (T3529), rem

Ultra Water Proof Sheet Protector With Tuck-In Flaps (Modelp12205)

The Ultra Water Proof Sheet Protector With Tuck-In Flaps, model 12205, is a sheet protector designed for use by adults or children with incontinence. This sheet protector comes with tuck-in flaps to keep it from slipping out of place. It protects both sheet and mattress and is made of polyester/cotton and rayon with a vinyl backing. SIZE: Twin

Ultra Waterproof Sheet Protector

The Ultra Waterproof Sheet Protector is a sheet protector designed for use by individuals with incontinence. This protector has an inner lining made of cotton and polyester and a 100 percent vinyl polyester backing. The non-slip protector fits over the bottom sheet to protect the mattress and sheets from moisture and staining. DIMENSIONS: (LxW): 34 x 36 inches.

Ultra Waterproof Sheet Protector (Model P12605)

The Ultra Waterproof Sheet Protector, model P12605, is a sheet protector designed for use by individuals with incontinence. Made of cotton and polyester with a vinyl backing, this protector protects both the sheet and mattress. DIMINISIONS: (LxW): 34 x 36 inches. COLOR: White.

Ultra Waterproof Sheet Protector With Handles (Modelp12605/h )

The Ultra Waterproof Sheet Protector With Handles, model P12605/H, is a sheet protector designed for use with individuals with incontinence. The protector is made with handles for moving a person from side to side to help prevent bedsores. It protects both sheet and mattress. The material is a blend of cotton, polyester, rayon, and vinyl.

Uneek Bedrail System

The Uneek Bedrail System is a side rail and transfer aid designed to assist individuals with mobility and balance disabilities in entering and exiting the bed. The steel bedrail attaches to a steel frame that slips between the mattress and the box springs. Safety straps provide additional support in anchoring the unit to the bed. This portable bedrail system is available in two models. One opens and closes like a gate, and the other one does not. Both models feature a utility board that can supp

Universal Carry All

The Universal Carry All is a carrying bag for walkers designed to provide carrying capability for people with mobility disabilities. This heavy-duty nylon pouch secures to walker crossbars, wheelchairs, and bed rails and features one large compartment, a security pocket and eyeglass pouch, and a keypouch with cord. DIMENSIONS (WxL): 18.75 x 11 inches.

Universal Steel Telescoping Bed Rails (Models 1960 & 1962)

Universal Steel Telescoping Bed Rails, models 1960 and 1962, are side rails designed to keep people from rolling out of bed. These rails fit any hospital bed and are easily installed without tools. The rails can be raised of lowered at either end and have an all smooth-welded construction with 7/8 inch and 1 inch strong 18-gauge tubing. OPTIONS: half length steel bed rail (1962). DIMENSIONS: the rails telescope from 3/4 to full length (50 to 76 inches). The spring-loaded cross bar adjusts from 3

Unreal Lambskin Medi-Pads & Softtouch Bed Pads

Unreal Lambskin Medi-Pads and SoftTouch Bed Pads are decubitus pads of synthetic sheepskin for pressure relief and prevention of decubitus ulcers. The pads have 3/4-inch pile, are stain resistant, nonflammable, nonallergenic, nontoxic, machine washable and dryable, and resistant to packing down. The pads can be cut to any shape without unraveling. DIMENSIONS: Medi-Pads are available in 24 x 30 (Small), 30 x 40 (Medium), 30 x 60 (Large), or 35 x 80 (hospital bed) inches. SIZES: Bed Pads are avail

Unreal Lambskin Wheelchair Accessories

Unreal Lambskin Wheelchair Accessories are decubitus pads for various pressure points including the seat, back, arm and footplates. These covers are made of synthetic fleece for pressure relief and prevention of decubitus ulcers. The material consists of 3/4-inch pile and is stain resistant, nonflammable, nonallergenic, nontoxic, machine washable and dryable, and resists packing down. Foot plate, arm and removable desk arm pads are sold in pairs. BACK COVER: Fits all standard adult wheelchair mo

Upeasy Power Seat (Model Upe-P100)

The UPEASY Power Seat, model UPE-P100, is a seat cushion with lift that converts any chair to a seat lift chair for use by individuals with neurological, lower extremity, or mobility disabilities or arthritis who have difficulty rising from a seated position. The cushion is placed on any chair or sofa with arms, and when the user sits on it and pushes down on one of the two power levers, it gently lowers the user to a seated position. To rise, the user pulls up on one of the power levers and pla

Upeasy Seat Assist (Models Upe 1 & Upe 3)

The UPEASY Seat Assist converts any chair to a seat lift chair for use by individuals with neurological, lower extremity, or mobility disabilities or arthritis who have difficulty rising from a seated position. The cushion is placed on any chair and when the user sits on it, it gently lowers the user to a seated position. To rise, as the user begins to shift weight to rise, the seat automatically provides a supported, stable horizontal assist, lifting 80 percent of the user's weight. This cushio

Uplift Premium Power Seat (Models Ps3017 & Ps3020)

The Uplift Premium Power Seat, models PS3017 and PS3020, is a seat lift cushion that converts any chair or sofa with arms to a seat lift chair for use by individuals with neurological, lower extremity, or mobility disabilities or arthritis who have difficulty rising from a seated position. The cushion is placed on the chair or sofa, and when the user is ready to rise, he/she uses the toggle switch on the hand controller extending from the base on a gooseneck to begin the upward movement, and pla

Uplift Seat Assist (Models Med-Ul 100 & Med-Ul 300)

The Uplift Seat Assist, models MED-UL100 and MED-UL300, is a seat cushion with lift that converts any chair to a seat lift chair for use by individuals with neurological, lower extremity, or mobility disabilities or arthritis who have difficulty rising from a seated position. The cushion is placed on any chair and the selector is set to the weight of the user. As the user begins to shift weight to rise, the seat automatically provides a supported, stable horizontal assist, lifting 80 percent of

Uplift Standard Power Seat (Model Ps1000)

The Uplift Standard Power Seat, model PS1000, is a seat lift cushion that converts any chair or sofa with arms to a seat lift chair for use by individuals with neurological, lower extremity, or mobility disabilities or arthritis who have difficulty rising from a seated position. The cushion is placed on the chair or sofa, and when the user is ready to rise, he or she pulls up on the power lever and places his or her hands on the arms of the chair or sofa to activate the seat, which automatically

Vari-X Computer Table (Models Vx60, Vx61, & Vx62)

The Vari-X Computer Table is an adjustable-height computer table designed for use by individuals who use wheelchairs, and those with severe physical disabilities and spinal cord injury. These computer tables can each be lowered to less than 10 inches off the floor for individuals who need to work lying down, raised to accommodate a wheelchair, and raised up to three feet five inches off the floor to allow users to work standing up or in a stander. The worktop passes easily through doorways on it

Ventilated 3-Section Mattress Pad

The Ventilated 3-Section Mattress Pad is a foam mattress surface designed for use by individuals with physical disabilities who are at risk for pressure ulcers. Made of hypo-allergenic Biofoam, this pad varies in thickness under the head, torso, and legs for even pressure distribution. ComfortFlow ventilation increases air circulation and prevents heat build-up. SIZES: Twin, full, queen, and dual king.

Versacare Tc Bed

The VersaCare TC (Transitional Care) Bed is a motorized bed designed for use by post-surgical patients and individuals with severe physical disabilities or spinal cord injury. This hospital bed has clinical mattress integration, a digital head of bed display, a FlexAfoot mechanism to help prevent foot drop, a powered Boost system to help the user move up in bed, and Turn Assist to help caregivers turn the user over to prevent bed sores. It has power transport with a built-in transport shelf, lin

Vibrating Pillow

The Vibrating Pillow is a sensory integration activity designed for use by children with tactile, sensory, or neurological disabilities. Designed to enhance tactile awareness in children, the pillow vibrates when touched with pressure. Removing pressure stops the vibration. The pillow is covered in soft corduroy. POWER: Uses two D batteries (not included). DIMENSIONS: 12 x 12 inches.

Vibrating Pillow

The Vibrating Pillow is designed to enhance tactile awareness for children with physical or sensory disabilities. When activated by an external switch (switch not included), the pillow vibrates. The pillow accepts any switch with a 1/8-th inch jack. POWER: Uses two D batteries (not included). COLOR: Assorted

Vibrating Pillow (Model 460, 460-8)

The Vibrating Pillow, model 460 and 460-8, is a vibrating pillow designed to enhance tactile awareness for children with physical or sensory disabilities. When activated by an external switch, the pillow vibrates. Any Toys for Special Children capability switch can be used with this product (see separate entries).

Vikem Vinyl Pillow Case

The Vikem Vinyl Pillow Case is a pillow protector designed for use by individuals who have allergies or swallowing disabilities. This clear case have zipper closure. DIMENSIONS: 21 x 27 inches; other sizes made to order.

Vinyl Bed Rail Pads (Series 4010 & 4011)

The Vinyl Bed Rail Pads are side rail pads designed to provide protection from injury from bed rails. These foam-padded, vinyl-covered pads cover the rails and extend below and between the rail and the mattress for added protection. Velcro closures secure the pads to the rails. These pads wipe clean. DIMENSIONS (HxTxL): Available in 15 x 1 x 60 inches, 15 x 1 x 72 inches, 15 x 1 x 80 inches, 15 x 2 x 60 inches, 15 x 2 x 72 inches, or 15 x 2 x 80 inches.

Vinyl Pillow Protector (Models C4800S & C4800K)

The Vinyl Pillow Protector is designed for use by individuals with drooling disabilities. Made of vinyl, these protectors are equipped with zipper closure to protect the entire pillow. SIZES: Model C4800S fits standard pillows and model C4800K fits king sized pillows.

Vision

Vision is a height-adjustable table that has not cross braces underneath the surface. It is designed for individuals who use a wheelchair for mobility. The Vision is a mobile table that can be adjusted manually or electrically. The adjustable surface is available for dual or single users.

Vista Fully-Electric Adjustable Bed

The Vista Fully-Electric Adjustable Bed is a motorized bed designed for use by individuals who need to elevate the head of the bed. This bed features a 312-coil innerspring mattress, an epoxy-coated steel frame, a choice of standard or decorative head- and footboards, and four ball-bearing casters (two locking). The bed operates on two motors and the head of the bed adjusts from flat to a sitting position. CONTROLS: The six-position hand-held remote control snaps onto bed rails (not included). P

Vitalsleep

The VitalSleep is a sleeping aid and anti-snoring device designed for use by individuals with snoring disorders. This device is a flexible, comfortable, customizable mouthpiece intended to keep air passages open during sleep. Once inserted in the mouth, the VitalSleep gently holds user's the lower jaw forward, lifting the tongue out of the way, preventing the throat from constricting or collapsing. The adjustable and customizable fit of this device allows the user to breathe freely through the m

Vivax Mobility System

The Vivax Mobility System is a motorized transfer bed designed to safely and automatically move persons with mobility disabilities from a specialized bed to a specialized wheelchair that is attached to the end of the bed. The procedure can be accomplished by the user or an attendant with a push of a button from a hand-held pendant controller. The procedure begins with the user lying in a supine position on the bed; then, with a push of a button, the integrated conveyor system transfers the user

Vox Adjustable Workstation-Bi-Level Rectangle

The Vox™ Series by POPULAS is designed to accommodate various work heights for individuals of all sizes in a variety of work industries. It is designed to increase circulation, spine health, user productivity and interpersonal interactions. Vox™ workstations eliminate the cross brace, allowing ultimate knee space and complete freedom of movement. It is equipped with a push-button powered adjustment that has been designed to operate smoothly with minimal noise. It is built with extruded aluminum

Vox Adjustable Workstation-Corner

The Vox™ Series by POPULAS is designed to accommodate various work heights for individuals of all sizes in a variety of work industries.It is designed to increase circulation, spine health, user productivity and interpersonal interactions. Vox™ workstations eliminate the cross brace, allowing ultimate knee space and complete freedom of movement. It is equipped with a push-button powered adjustment that has been designed to operate smoothly with minimal noise. It is built with extruded aluminum

Wal-Pil-O 4-In-1 Cervical Pillow & Travel Size Pillow

The Wal-Pil-O is a cervical pillow with narrow and firm wide borders plus soft and medium centers. It provides four combinations of head and neck support: backlying and sidelying. The Wal-Pil-O is made of polyurethane with one section polyester fiber. DIMENSIONS (WxLxD): 13 x 15 x 4.25 inches.

Wal-Pil-O, The 4-In-1 Cervical Pillow

The 4-in-1 Cervical Pillow is designed for home or institutional use to provide four combinations of head and neck support in backlying and sidelying positions. It has narrow and firm wide borders plus soft and medium centers. It is made of polyurethane with one section filled with polyester fiber. DIMENSIONS: 25 x 15 x 4.25 inches.

Waterproof Flannel Sheet Protector

The Waterproof Flannel Sheet Protector is designed for use by individuals who are incontinent. This protector provides a 100 percent waterproof barrier against moisture and staining when placed directly on top of a sheet or mattress. The protector comprises a thin layer of polyurethane between two layers of cotton flannel and has all-around stitching. Machine washable and dryable, the protector can be bleached. DIMENSIONS: 39 x 39 inches or 39 x 54 inches.

Waterproof Hospital Fleece Pads

The Waterproof Hospital Fleece Bed Pads are decubitus pads designed for use by individuals at risk for pressure sores/ulcers. These pads are made from 100 percent machine-washable lambswool knitted into a backing material to create a dense fleece. A breathable waterproof layer is bonded to the back. This fleece creates a microclimate which assists in regulating body temperature and humidity. Hospital Fleece is hypoallergenic and non-flammable. The wool is treated with an antibacterial and an ant

Waterproof Mattress Pad

Pad that protects bedding from stains. Liquid proof. Reversible. Soft flannelette material laminated with vinyl on each side. Machine washable, tumble dry. Features anchor bands at each corner to secure it on bed. Available for Crib (SAS C), Twin (SAS T), Full (SAS F), Queen ( SAS Q) or King (SAS K) sized beds.

Waterproof Mattress Protector (Model Pvmp)

The Waterproof Mattress Protector, model PVMP, is a mattress protector designed for use by individuals with incontinence. The protector provides total fluid protection and features elasticized sidewalls that keep the protector firmly in place. It is antibacterial, machine washable, and bleachable. The material is a blend of vinyl, cotton, and polyester. SIZES: Twin.

Waterproof Pillow Cases

The Waterproof Pillow Cases are waterproof pillowcases designed for use by individuals with severe physical disabilities or swallowing disabilities or disabilities that cause drooling. These pillowcases are made of 100 percent cotton interlock with a waterproof vinyl backing for keeping pillows clean and dry. These machine-washable cases have envelope-style closures that make encasing or removing covers smoother.

Wedge

The Wedge is a body positioner designed to support the body for various activities in prone, supine or sitting positions, and can also be used for elevating the lower extremities in cases of edema. It is made of high-density foam with a washable, waterproof vinyl cover. DIMENSIONS: A variety of models are available with heights between 4 and 12 inches, lengths of 22 to 40 inches, and widths of 20 to 24 inches.

Wedge No Flux Inflatable Bed Wedge

The Wedge No Flux Inflatable Bed Wedge is a positioning wedge designed for use by individuals with eating or swallowing disabilities including hiatal hernia, acid reflux, heartburn, or GERD. Intended for use in the prone position, this portable positioning wedge elevates the user's upper body to a height of up to 6 inches when inflated. The positioning wedge features a travel/carrying case, a hand pump, and a removeable, washable cotton cover. DIMENSIONS (HxLxW): 6 x 36 x 24 inches when inflated

Welded Frame Science Table, Round Legs (Model A3080-99)

The Welded Frame Science Table, Round Legs, model A3080-99, is a height adjustable work table and adapted student desk designed for use by individuals with lower extremity and mobility disabilities or spinal cord injury and others who use wheelchairs. This table has a welded steel frame and a chemical-resistant EcoStone top that is made from 100% post consumer recycled materials. DIMENSIONS (HxWxD): 29 (minimum) x 60 x 24 inches. WARRANTY: Lifetime warranty.

Wendylett

WendyLett is a sliding sheet and bed mobility aid designed for use by individuals who find it difficult to turn in bed. The central part is smooth to reduce friction, which enables users to turn or be turned by a caregiver with little force. Care recipients effortlessly slide sideways but are slowed by the anti-slip material at the sides. OPTIONS: WendyLett2Way and WendyLett4Way are drawsheets that can be placed on top of the sliding sheet to prevent sliding down in bed while turning. The drawsh

Westin Picnic Table - One End Wheelchair Accessible (Model Sptha)

The Westin Picnic Table – One End Wheelchair Accessible, model SPTHA, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This long, rectangular table has benches on two sides, with space for a wheelchair on one end. It is made from recycled plastic with stainless steel hardware. DIMENSIONS (HxLxW): The table top is 31 x 96 x 29 inches. The seats are 20 x 72 x 9.5 inches. WEIGHT: 340 pounds. COLOR: Cedar table top and seats with green fr

Westin Two-End Wheelchair Accessible Picnic Table (Model Ptha)

The Westin Two-end Wheelchair Accessible Picnic Table, model PTHA, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This rectancular picnic table accommodates two wheelchairs. It has a raised top and extended ends to allow wheelchair users to maneuver under the table. The table is made from recycled plastic with stainless steel hardware. DIMENSIONS (HxLxW): The table top is 31 x 97.5 x 29 inches. The seats are 20 x 72 x 9.5 inches. WE

Wheelchair Accessible Recliner

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To provide a custom adaptation of a wheelchair accessible recliner for individuals with mobility disabilities. The Wheelchair Accessible Recliner allows wheelchair users an alternative from standard furniture that is comfortable and designed with their needs in mind. Aside from comfort, the Wheelchair Accessible Recliner provides therapeutic advantages including pressure relief and stretching exercises. To use the Wheelchair Accessible Recliner the

Wheelchair Accessible Table (Model TF31281)

The Wheelchair Accessible Table, model TF31281, is a wheelchair picnic table designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. The unit seats 7 people around a circular tabletop, with three benches and space for a wheelchair. The tabletop has a polished or ground concrete surface, and it accepts an optional umbrella. The unit is made of steel-reinforced concrete with metal legs. Assembly is required. OPTIONS: Umbrella; refinishing kit for concre

Wheelchair Accessible Tops And Seats

Standard picnic table with extra long top. Seats are 6 feet long, tops are 8 feet long. Galvanized steel frame. Constructed of Redwood, aluminum, or fir. Weight: 222 pounds, 62 pounds, 130 pounds, repectively.

Wheelchair Picnic Table (Model 1312)

The Wheelchair Picnic Table no. 1312 has a table top that extends 12 inches at one end to be accessible to wheelchair users. The table and seats are constructed of anodized aluminum. The curved leg supports are made of 1 5/8-inch O.D. galvanized pipe. GROUND SPACE: 5 by 8 feet. WEIGHT: 115 pounds. WARRANTY: 1-year on materials and workmanship.

Wheelchair Picnic Table (Model 1337)

The Wheelchair Picnic Table no. 1337 has pressure-treated wood top and seats on curved leg supports made of 1 5/8-inch O.D. galvanized pipe. The table top extends 12 inches beyond the benches and has no obstructing posts or beams to provide wheelchair access. GROUND SPACE: 5 by 8 feet. WEIGHT: 206 pounds. WARRANTY: 1-year on materials and workmanship.

Wheelchair-Accessible Desk

The Wheelchair-Accessible Desk is a height-adjustable deskdesigned for classroom use by children who use wheelchairs. This desk features a heavy 16-gauge frame with an integral U-brace and an oversized solid-plastic top. It includes a dual-bolt leg attachment system for added security. DIMENSIONS: The desk height can be adjusted from 31 to 34 inches. The desktop is 20 x 36.5 inches. COLOR: The top is available in beige or grey.

Wheelchair-Accessible Mobile Workstation (Models W53191 & W53192)

The Wheelchair-Accessible Mobile Workstation is a height-adjustable work table designed for use by individuals who use wheelchairs in schools, training centers, and offices. The work surface is mar-resistant laminate with rounded corners edged with protective vinyl molding. Its open design allows access to and from work surface. The tabletop height is adjustable to accomodate a variety of users. The unit features four casters, two with locking brakes. DIMENSIONS: The height adjusts in one-inch i

Wheeled Chair Tables (Models 6890 & 6892)

Geriatric chair with tray table. Fixed steel frame. 34 inch overall length. 24 inch overall width. 18 inch seat width. 16 1/2 inch seat depth. 19 1/2 inch seat height. 26 inch back height. Padded seat and back. Fixed armrests. Footrest slides under chair during transfers. Permanently mounted tray table folds out of the way for storage. Model 6892 backrest reclines to 45 degrees in 5 degree increments. 5 inch casters. Push handle. Optional legrest. 4 upholstery colors. Weight, 62 pounds. .

Wick-Er Warmup Pillowcase

The Wick-er Warmup Pillowcase is a pillow protector designed for use by individuals with neurological disabilities and other conditions resulting in night sweats. The soft material is designed to draw moisture away from the body when perspiration begins. The material also has silver in it to aid in fighting germs. SIZES: Standard or king. DIMENSIONS: Standard pillowcases are 19 x 30 inches. King cases are 20 x 40 inches. COLOR: Standard color is champagne (cream).

Wick-Er Warmup Sheet Cover

The Wick-er Warmup Sheet Cover is a sheet designed for use by individuals with burns or neurological disabilities and other conditions resulting in night sweats. The soft material is designed to draw moisture away from the body when perspiration begins. The material also has silver in it to aid in fighting germs. The cover can be used on top of standard sheets and tucked in if desired. SIZES: Single or double. Crib sheets and custom sizes are also available. DIMENSIONS: The single cover is 30 x

Wombat

The Wombat is a child's adjustable positioning chair designed for use by children with mobility or neurological disabilities. This four-caster chair has an adjustable back and seat, and comes with a variety of support devices. The back adjusts manually in depth, height, and angle. The angle of the seating surface can be changed to accommodate multiple activities. In the classroom the chair can be adjusted for use by different children. OPTIONS: Available accessories include head supports, lift h

Wondawedge

WondaWedge is an inflatable wedge pillow designed for indoor or outdoor use by individuals with balance, back, respiratory, or digestive disabilities. Made of sueded vinyl, this pillow has an attached mat and enables users to set their own comfort level by adjusting the level of inflation. This pillow offers three different angles: sitting up, reclining, and lying down. When not in use, the pillow deflates for compact storage in a small space. WEIGHT: 1.3 pounds. COLOR: Warm gray, royal blue, l

Wondergel Sof-Pillow (Model Wg-Sp)

The WonderGel Sof-Pillow, model WG-SP, is a cervical or positioning pillow designed for use by individuals who need positioning or neck support. The pillow has a flat bottom and rounded top. Its shape provides lumbar, leg, and neck support, and its plush, washable cover stays cool on skin. The unit is made of WonderGel, which consists of hollow columns of a gel called Gelastic, a solid rubber-like material. The columns form a pattern similar to a honeycomb, which redistributes and equalizes pres

Wooden Dresser Drawer Handle

DO IT YOURSELF PURPOSE: To make dresser drawers easier to open for senior and individuals with arthritis, use of only one hand or fine motor or grasping disabilities. The existing knobs can be removed and replaced with a wooden handle that extends across the drawer and enables the user to open the drawer with one hand. To maske the handle, drill holes at each end of a horizontal dowel and in a pair of wooden spacers. Put bolts through the holes in the dowel and the specers and secure in the hol

Wooden Picnic Table - Wheelchair Accessible (Models Pup238H-Pt8 & Pup158H-Pt8)

The Wooden Picnic Table - Wheelchair Accessible is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This long table has seats on two sides made from Southern Yellow Pine planks, with space for a wheelchair at each end. Users can slide into the seats without stepping over the frame. The wood is ACQ-treated and the frame is either galvanized or powder-coated iron pipe. DIMENSIONS (HxLxW): The table top is 30.5 x 96 x 30 inches. The seats a

Wool-Pile Pillow Case With Zip Closure

The Wool-Pile Pillow Cover with Zip Closure is a pillow protector designed for use by individuals at risk for pressure sores or sheet abrasions on the ear and neck. A foam backing helps keep the pad in place while the wool pile allows air to reach the skin and reduces the chance of skin breakdown. DIMENSIONS: 27 x 17 inches.

Wool-Pile Pillow Cover With Zipper Closure

The Wool-Pile Pillow Cover with Zipper Closure is a pillow protector designed for use by individuals at risk for pressure sores/ulcers. The wool-pile provides a cushion for sensitive ears and absorbs moisture. Machine washable, the Wool-Pile Pillow Cover is closed by a zipper at one end.

Working Table

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Table can be shaped like half a donut for persons with limited reach. Describes a work table made of wood or other sturdy material, 64 by 32 by 5/8 inches in size, cut in a half-circle with a semicircular indentation on the flat side to accommodate the person working. Suggests using the type of folding legs used on banquet tables. Table folds up for easy storage. SKILLS REQUIRED: Woodworking. AUTHOR: Mooney, J TITLE: Working Table JOURNAL: Accent on Li

Workmod Foot Rest (Model Nc73583)

The WorkMod Footrest, model NC73583, is designed to reduce back pain and fatigue caused by prolonged sitting by supporting the legs and feet in the proper position. The multi-position footrest elevates the feet slightly and the position of the footrest is adjusted using foot pressure.

Worktable With Support For Standing.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Adjustable work table provides extra support and balance needed to prevent employees from falling. Particularly useful for lower extremity amputees. Wooden table top consists of wide hinged armrests and a safety belt. Four adjustable 7/8 inch metal pipes run through standard work bench to serve as legs. Includes photograph and diagram. COMMENTS: Submitted by the Occupational Therapy Department, Institute of Physical Medicine and Rehabilitation, New Yor

Zackback Posture Chair

The ZackBack Posture Chair is an adjustable office chair that provides postural support for individuals with back pain. This chair has two adjustable back support pads, one at the lower thoracic level and the other in the sacral region. The chair's sacral support stabilizes the pelvis in its proper neutral position, while the chair's lower thoracic support elevates and stabilizes the rib cage. Together, they prevent a slumped sitting posture.

Zero Gravity Massage Chair

The Zero Gravity Massage Chair is a recliner chair and massager designed for use to reduce stiffness and promote circulation and relaxation. The backrest, footrest and seat adjust automatically to the body’s natural position. All massage functions can be used in this zero gravity position, or the legs can be further elevated and the backrest reclined for circulation and relaxation. An air-only Comfort Course delivers gentle stretch and compression massage to the lower back, hamstrings, calves, a

Ziggy Bed Chair

The Ziggy Bed Chair is a bed aid designed for use by individuals with mobility disabilities, spinal cord injury or bedridden individuals. The bed chair is placed on top of mattress and around patient, allowing them to sit upright in bed while providing back support and is secured to bed frame for patient safety. Fits all framed beds and has optional removable tray table.

Ziggy Medichair With Swing Tray

The Ziggy Medichair with Swing Tray is a lift and transfer lift system designed for use by individuals with mobility disabilities, spinal cord injury or bedridden individuals. It is a strapless lift and transfer system benefiting patients and caregivers with its four- point weight distribution lift process. Outstanding for rehabilitation patients, providing maximum care with minimal transfer, two in total, one transfer from their bed into the Ziggy Medic hair and a return transfer at night back

Zippered Style Vinyl Mattress Protector (Models C4200, C4400F, C4400Q, C4400K, & C4400T)

The Zippered Style Vinyl Mattress Protector is a mattress protector designed for use by individuals with incontinence. This protector provides full mattress protection and is made of high-quality vinyl with a rustproof zipper. SIZES: Model C4200 fits hospital beds. Model C4400T fits twin beds, model C4400F fits full mattresses, model C4400Q fits queen mattresses, and model C4400K fits king mattresses. DIMENSIONS: Model C4200 is 36 x 80 x 6 inches. Model C4400T is 39 x 75 x 7 inches. Model C4400F

 
Processing...


Driving Walking/Biking Public Transit  Get Directions