Mobility Scooters

Results: 137

Air Free Danube Scooter Tire

The Air Free Danube Scooter Tire is a polyurethane tire designed for use as a replacement tire for electric scooters and runabouts. This airless tire requires a split hub and fits all manufacturers' caster-type wheels requiring an 8x1 tire. Its PSI equivalency rating is 50 pounds per square inch. DIMENSIONS: 8 inches in diameter, 1 inch wide.

Air Free Fraser Scooter Tire

The Air Free Fraser Scooter Tire is a polyurethane tire designed for use as a replacement tire for scooters. This airless tire requires a split hub and fits all manufacturers' caster-type wheels requiring an 8 x 1.5-inch tire. Its PSI equivalency rating is 50 pounds per square inch. DIMENSIONS: 8 inches in diameter x 1.5 inches wide.

Air Free Linville Wheelchair / Scooter Tire

The Air Free Linville Wheelchair and Scooter Tire is a polyurethane tire designed for use as a replacement tire for wheelchairs and electric scooters. This airless tire has a saw tooth tread pattern which is non-marking but can traverse severe terrain. The tire fits any manufacturer's model requiring a 410/350-4 type tire on a split rim hub. Its PSI equivalency rating is 50 pounds per square inch. DIMENSIONS: 10.5 inches in diameter x 3 inches wide. WARRANTY: Lifetime warranty against structural

Air Free Onega Hd Scooter Tire

The Air Free Onega HD Scooter Tire is a polyurethane tire designed for use as a replacement tire for electric scooters. For use where a more rugged tire is needed, this airless tire fits most manufacturers who use a two-piece hub that takes a 9/3.50-4 tire. Its PSI equivalency rating of 80 pounds per square inch. DIMENSIONS: 9 inches in diameter x 3.5 inches wide.

Air Free Onega Scooter Tire

The Air Free Onega Scooter Tire is a polyurethane tire designed for use as a replacement tire for electric scooters. This airless tire fits most manufacturers who use a two-piece hub that takes a 9/3.50-4 tire. This tire has a PSI equivalency rating of 50 pounds per square inch. DIMENSIONS: 9 inches in diameter x 3.5 inches wide.

Air Free Trinity Scooter Tire

The Air Free Trinity Scooter Tire is a polyurethane tire designed for use as a replacement tire for scooters. This airless tire fits all manufacturers' split rim hubs that require a 250-4 type tire, also known as a 9 x 2.8. It also fits hubs requiring a 280-4 or 280/250-4 tire. It has a smooth tread and a PSI equivalency rating of 40 pounds per square inch. DIMENSIONS: 9 inches in diameter x 2.8 inches wide.

Air Free Volga Scooter Tire

The Air Free Volga Scooter Tire is a polyurethane tire designed for use as a replacement tire for scooters. This airless tire requires a split hub and fits all manufacturers' caster-type wheels requiring an 8 x 1.25-inch tire. This tire has a PSI equivalency rating of 40 pounds per square inch. DIMENSIONS: 8 inches in diameter x 1.25 inches wide.

Alert Light

The Alert Light is a safety flag designed for use with manual wheelchairs, power wheelchairs or scooters. It is intended to improve the visibility of the wheelchair or scooter during the day or night. The Alert Light consists of a pennant-shaped flag has a folding shaft that enables the flag to fold below the user's head when entering and exiting vehicles or when not in use. The upper portion of the shaft has a light emitting diode (LED) light that can be set as an orange glow or a flashing str

Amigo Classic Fd

The Amigo Classic FD (front drive) is a 3-wheeled scooter designed primarily for indoor surfaces and outdoor use on solid, flat surfaces by individuals with lower extremity and mobility disabilities. FRAME (LxWxH): 43 x 20 x 36.5 inches. The underbody ground clearance is 2.5 inches and the turning radius is 34 inches. The painted steel frame is available in midnight black with a black deck and midnight black front cover over the front wheel and midnight black rear cover (standard) over the batte

Amigo Ext

The Amigo EXT is a scooter designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury. This scooter is designed for larger-framed individuals, 6 feet tall and over. It is similar to the Amigo RD (see separate entry) with a 4-inch longer platform and a 2-inch longer handle. FRAME (HxLxW): 39.5 x 47.8 x 23.5 inches. The steel frame, painted cinnamon red, has a one-piece extended platform and a black rear safety bumper. The turning radius is 38

Amigo Hd

The Amigo HD is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities. It is designed for use by larger-framed individuals. FRAME (HxLxW): 39.5 x 47.8 x 24 inches. The steel frame is painted cinnamon red and has a one-piece extended platform with a 3.5-inch underbody clearance and a 38-inch turning radius and a black rear safety bumper. A basket mounted on the front of the tiller is standard. CONTROLS: EZ Tilt handle with HI/LO speed controls a

Amigo Rd

Amigo RD is a three-wheeled scooter designed for use by individuals with lower extremity and mobility disabilities. FRAME (HxLxW): 37.8 x 43.8 x 23.5 inches. The one-piece, painted steel platform has a 34-inch turning radius and a 3.5-inch underbody ground clearance. The scooter is available in a choice of cinnamon red, pacific blue, champagne beige or midnight black, with a black rear safety bumper. A basket mounted on the front of the tiller is standard. A basket mounted on the front of the ti

Amigo Rt Express

The Amigo RT Express is a three-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities. FRAME: (HxLxW): 34.75 x 41.5 x 20.5 inches. A version with a 3-inch shorter platform is also available (see separate listing for Amigo RT Express Junior). The scooter has a one-piece platform with an underbody ground clearance of 2.5 inches and a 33 degree turning radius. The painted steel frame is available in champagne beige, midnight black, pacific b

Amigo Rt Express Junior

The Amigo RT Express Junior is a 3-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity and mobility disabilities. FRAME (HxLxW): 33 x 38.5 x 20.5 inches. This compact scooter is designed to accommodate people up to five feet, four inches tall. A version with a 3-inch longer platform is also available (see separate listing for Amigo RT Express). The scooter has a one-piece platform with an underbody ground clearance of 2.5 inches and a turning radius of 33 inche

Amigo Smartmover & Smartmover Xl

The Amigo SmartMover and SmartMover XL are three-wheel scooters designed for use by visitors and employees in hospitals, museums, libraries, universities and other public spaces with lower extremity, mobility, neurological, or physical disabilities, obesity, or spinal cord injury. FRAME (HxLxW): 37 (30.5 at top of basket) x 49 (53 for SmartMover XL) x 24 inches. The steel frame features a black platform and tiller. A rear safety bumper and front and rear stability devices are standard. The turni

Amigo Travelmate

The Amigo TravelMate is a 3-wheeled portable travel scooter designed for indoor and outdoor use by individuals with mobility disabilities. FRAME (LxWxH): 43 x 22 x 36.5 inches. The TravelMate has an underbody ground clearance of 2.5 inches and a turning radius of 34 inches. The painted steel frame is available in black. The scooter disassembles or the tiller folds down for transport or storage. A basket mounted on the front of the tiller is standard. CONTROLS: MPC electronics controller. The con

Amigo Viva

The Amigo Viva is a 3-wheeled portable travel scooter designed for indoor and outdoor use by individuals with mobility disabilities. FRAME (LxWxH): 45 x 22.5 x 36 inches. This scooter has an underbody ground clearance of 2.25 inches and a turning radius of 35 inches. The painted steel frame is available in moss green. The tiller folds down for transport or storage. A basket mounted on the front of the tiller is standard. CONTROLS: MPC electronics controller. Controls are located on adjustable EZ

Arm Tote (Models Ez0123 & Ez0124)

The Arm Tote is a wheelchair or scooter side pouch designed for use by individuals with mobility disabilities or spinal cord injury. Made of nylon, this pack attaches to the armrest of a wheelchair or scooter with the two adjustable straps with plastic fasteners. An inner pocket can be accessed by opening a full-length zipper. There are two (model EZ0124) or three (model EZ0123) pockets on the outside. SIZES: Large (model EZ0123) and small (model EZ0124). DIMENSIONS (HxLxW): 2 x 14 x 10.5 inches

Avenger 3-Wheel Scooter

The Avenger is a heavy-duty 3-wheeled scooter designed for outdoor use by individuals with mobility disabilities. Designed to traverse uneven terrain and travel at higher speeds, this scooter is equipped with a front basket, bumper guards, a headlight and flashing safety tail lights. FRAME(LxW): 51.5 x 24.6 inches. The turning radius is 42 inches and the ground clearance is 4 inches. The scooter disassembles for transport. This scooter is charcoal grey color. RWD: 24-volt, 4 pole sealed rear-whe

Avenger 4-Wheel Scooter

The Avenger is a heavy-duty 4-wheeled scooter designed for outdoor use by individuals with mobility disabilities. Designed to traverse uneven terrain and travel at higher speeds, this scooter includes a front basket, bumper guards, a headlight and flashing safety tail lights. FRAME (LxW): 51.5 x 25 inches. The turning radius is 48.5 inches and the ground clearance is 4 inches. The scooter disassembles for transport. This scooter is charcoal grey. CONTROLS: 110-amp programmable controls. RWD: 24-

Bobcat 3 Wheel Compact Scooter (Models S38600 & S38601)

The Bobcat 3 Wheel Compact Scooter, models S38600 and S38601, is a three-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 38 x 19 x 38.5 inches. The turning radius is 32.2 inches. It has front 2-inch anti-tip wheels and a front large carry basket. The scooter can be disassembled into four pieces for transport, and the tiller folds down for stor

Bobcat 4 Wheel Compact Scooter (Models S38650 & S38651)

The Bobcat 4 Wheel Compact Scooter, models S38650 and S38651, is a four-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 37 x 19 x 35.5 inches. The turning radius is 35.4 inches. It has 2-inch anti-tip wheels and a front large carry basket. The scooter can be disassembled into 4 pieces. The base is available in red (model S38650) and blue (S386

Buggy Pioneer 5 Dlx S540/s541 Twin Front Wheel Micro

The Buggy Pioneer 5DLX S540/S541 Twin Front Wheel Micro Scooter is designed for indoor and limited outdoor use by individuals with mobility disabilities. Standard features include a front basket and multi-function display console. FRAME (HxLxW): 32 x 39 x 20 inches. The ground clearance is 2.4 inches and the turning radius is 38 inches. This scooter disassembles for transport or storage and is available in blue and red. CONTROLS: C40 controller with thumb lever handle bar steering. The tiller an

Buzzaround 4-Wheel Scooter (Model Gb-104)

The Buzzaround 4-Wheel Scooter, model GB-104, is a lightweight, portable scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 40.75 x 21 inches. The turning radius is 34.5 inches and the ground clearance is 1.75 inches. The frame disassembles into two parts for transport. The scooter is available in blue or red. CONTROLS: 70 amp programmable PG S-drive. RWD: 24-volt sealed transaxle rear-wheel drive. SEAT: The 360-degree swivel seat is 15 inches deep

Buzzaround Lite 3-Wheel Scooter (Model Gb-103)

The Buzzaround Lite 3-wheel Scooter, model GB-103, is a lightweight, portable scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 37 X 21.25 inches. The turning radius is 31 inches and the ground clearance is 2 inches. The frame has rear suspension and disassembles into 4 pieces for transport. This scooter is available in blue or red. CONTROLS: 45-amp programmable controls. SEAT: 360 degree swivel seat with fold-down backrest. UPHOLSTERY: Black viny

Buzzaround Lite 4-Wheel Scooter (Model Gb-105)

The Buzzaround Lite 4 -wheel scooter, model GB-105, is a lightweight, portable scooter designed for use indoors or outdoors by individuals with mobility disabilities. FRAME (LxW): 37 x 21.25 inches. The turning radius is 41.75 inches and the ground clearance is 2 inches. The frame disassembles into 4 parts for transport. The scooter comes with three sets of interchangeable shroud panels in vermillion red, arctic blue, and sahara. CONTROLS: 45 amp programmable drive. RWD: 24-volt direct current s

Celebrity X 3 Wheel

The Celebrity X 3 Wheel is a three-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with bright LED lights, a front basket, and a rear view mirror. FRAME(LxW): 46 x 24 inches with a 34-inch wheel base. The turning radius is 41.5 inches and the ground clearance is 3.5 inches. The frame has rear suspension, rear anti-tips, disassembles for transport, and features auto-latching lockup for ease of assembly and disassembly. The frame also features a

Celebrity X 4 Wheel

The Celebrity X 4 Wheel is a four-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with bright LED lights, a front basket, and a rear view mirror. FRAME(LxW): 46.75 x 24 inches with a 34.75-inch wheel base. The turning radius is 59 inches and the ground clearance is 3.5 inches. The frame has front and rear suspension, rear anti-tips, disassembles for transport, and features auto-latching lockup for ease of assembly and disassembly. The frame al

Celebrity Xl (Model Sc4450Dx)

The Celebrity XL is a four-wheeled scooter or powered wheelchair alternative designed for outdoor use by people with physical disabilities or limited mobility. FRAME (LxW): 51.24 x 25.5 inches with a turning radius of 62 inches and a ground clearance of 4.5 inches. The wrap-around heavy-duty steel frame disassembles without tools for transport and storage. The body features bumpers, rear anti-tips and covered battery and storage areas. It is available in blue or red. CONTROLS: Finger-tip control

Classic

The Classic is a 4-wheel scooter designed for indoor and outdoor use by individuals with lower extremity and mobility disabilities. FRAME (LxWxH): 40 x 22 x 36 inches; folded 31 x 22 x 19 inches. The seat and tiller fold for transport or storage. The Classic has an underbody ground clearance of 3.65 inches and a turning radius of 29 inches. Available colors are red, blue and silver. A detachable basket located under the seat is included. CONTROLS: Analog battery gauge and battery indicators lig

Companion Ii 3-Wheel Scooter (Model Gc-321)

The Companion 3-Wheel Scooter, model GC-321, is a compact, 3-wheeled scooter designed for use indoors and outdoors by individuals with mobility disabilities. The scooter comes standard with a front basket, headlight, and tail light. FRAME(LxW): 45.5 x 23.63 inches. The turning radius is 33 inches. Ground clearance is 4 inches. This scooter disassembles for transport and has a carpeted floor mat and expanded foot and leg room. The body is available in vermillion red, Arctic blue, or Sahara. CONTR

Companion Ii 4-Wheel Scooter (Model Gc-421)

The Companion 4-Wheel Scooter, model GC-421, is a compact, 4-wheeled scooter designed for use indoors and outdoors by individuals with mobility disabilities. The scooter comes standard with a front basket, headlight, tail light. FRAME(LxW): 49.5 x 23.75 inches. The turning radius is 58.5 inches and the ground clearance is 4 inches. This scooter disassembles for transport and has a carpeted floor mat and expanded foot and leg room. The body is available in vermillion red, Arctic blue, or Sahara.

Crutch Bag For Scooter

The Crutch Bag for Scooter is designed for use by people with lower extremity, walking or mobility disabilities who use crutches and a scooter. This bag, which is available made of nylon, sunbrella, or cordura, provides the means for transport a pair of crutches while seated in a wheelchair. The bag attaches to the back of a scooter using a bungee tie (included) and fits one pair of crutches in an upright position. It has an outer pocket for additional items and a flap with a Velcro closure. DIM

Crutch Carrier

CUSTOM ADAPTATION PURPOSE: To provide a customized crutch carrier for a scooter used by person with post-polio syndrome. This device is created by cutting two 30 centimeter lengths of PVC tubing that are large enough in diameter to accommodate the lower part of the crutches while holding them firmly in position. Two tube clips are used to hold each piece of tubing in place, and are screwed through into the frame of the scooter seat back. TITLE: Carrying Crutches. JOURNAL: TAD Journal. REF: Volu

Ctm 3-Wheel Economy Scooter (Model Hs-320)

The CTM 3-Wheel Economy Scooter, model HS-320, is a 3-wheeleed scooter designed for use by individuals with mobility disabilities. Standard features include a front headlight, front basket, side reflectors, and rear view mirror. FRAME (HxLxW): 37 x 43 x 21 inches. The ground clearance is 1.5 inches and the turning radius is 33.5 inches. Available in red, silver, or blue. CONTROLS: Large control panel with key switch and thumb levers. The tiller is adjustable. SEAT: 18-inch lightweight, padded, s

Ctm 3-Wheel Road Class Scooter (Model Hs-730)

The CTM 3-Wheel Road Class Scooter, model HS-730, is a 3-wheeled heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front and rear bumpers, a headlight, directional signals, rear view mirror, and under-seat storage. FRAME (HxLxW): 39.8 x 53.5 x 25.2 inches. The ground clearance is 3.0 inches and the turning radius is 43.3 inches. Color choices are blue, silver, or red. CONTROLS: Adjustable tiller with charging port, ke

Ctm 4-Wheel Deluxe Scooter (Model Hs-686)

The CTM 4-Wheel Deluxe Scooter, model HS-686, is a 4-wheeled heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front and rear bumpers, headlight, directional signals, rear view mirror, and under-seat storage. FRAME (HxLxW): 39.8 x 52.4 x 25.2 inches. The ground clearance is 3.0 inches and the turning radius is 43.5 inches. Color choices are blue, silver, or red. CONTROLS: Adjustable tiller with charging port, key swit

Ctm 4-Wheel Economy Scooter (Model Hs-360)

The CTM 4-Wheel Economy Scooter, model HS-360, is a 4-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, headlight, side reflectors, and under-seat storage. FRAME (HxLxW): 36 x 46 x 21 inches. The ground clearance is 1.5 inches and the turning radius is 52.3 inches. Color choices are blue, silver, or red. CONTROLS: Angle-adjustable tiller with full tiller shroud with charging port, key switch, and

Ctm 4-Wheel Mid Range Scooter (Model Hs-580)

The CTM 4-Wheel Mid Range Scooter, model HS-580, is a 4-wheeled scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front and rear bumpers, headlight, side reflectors, rear view mirror, and under-seat storage. FRAME(HxLxW): 38 x 50 x 24 inches. The ground clearance is 1.9 inches and the turning radius is 62.6 inches. Color choices are blue, silver, or red. CONTROLS: Console with charging port, key switch, and handle bars. The till

Ctm 4-Wheel Mini Scooter (Model Hs-250)

The CTM 4-Wheeled Mini Scooter, model HS-250, is a 4-wheeled travel scooter designed for use by individuals with mobility disabilities. A front basket is standard. FRAME(HxLxW): 33 x 38.6 x 18.7 inches. The leg room is expandable. The ground clearance is 1.6 inches and the turning radius is 44.3 inches. This scooter is available in red or yellow and has a front bumper. CONTROLS: Foldable tiller with large control panel with key switch and handlebars. SEAT: Foldable, padded 14-inch seat. ARMRESTS

Ctm 4-Wheel Mobility Scooter (Model Hs-890)

The CTM 4-Wheel Mobility Scooter, model HS-890, is a 4-wheeled heavy-duty scooter designed for individuals with mobility disabilities to use over rugged outdoor terrain. Standard features include full light kit with directional turn signals, front basket, front and rear bumpers, headlight, rear view mirror, and under-seat storage. FRAME(HxLxW): 49.6 x 60.0 x 26.0 inches. The ground clearance is 3.4 inches and the turning radius is 66.2 inches. This scooter has front and rear suspension. Color ch

Ctm 4-Wheel Road Class Scooter (Model Hs-740)

The CTM 4-Wheel Road Class Scooter, model HS-740, is a 4-wheeled heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front and rear bumpers, headlight, directional signals, rear view mirror, and under-seat storage. FRAME (HxLxW): 39.8 x 55.5 x 25.2 inches. The ground clearance is 3.0 inches and the turning radius is 66.9 inches. Color choices are blue, silver, or red. CONTROLS: Adjustable-angle tiller with charging port

Ctm Mid Range Scooter (Model Hs-570)

The CTM Mid Range Scooter, model HS-570, is a three-wheel powered scooter designed for use by individuals with mobility or lower extremity disabilities. FRAME (HxLxW): 39 x 49 x 24 inches. The frame has 1.9 inch ground clearance and is available in red, blue, or silver. Features include reflectors, a mirror, and a storage area. CONTROLS: On/off key switch and speed control knob. RWD: Rear-wheel drive. SEAT: 18-inch wide swivel seat with headrest. ARMRESTS: Flip-up, width-adjustable armrests. BRA

Ctm Mini Scooter (Model Hs-235)

The CTM Mini Scooter, model HS-235, is a 3-wheeled travel scooter designed for use by individuals with mobility disabilities. A front basket is standard. FRAME(HxLxW): 33 x 38.6 x 18.7 inches. The ground clearance is 1.6 inches and the turning radius is 35.8 inches. This scooter disassembles into two parts for travel or storage, offers expandable leg room, and has a front bumper. This scooter is available in red or yellow. CONTROLS: Large control panel with key switch on the adjustable folding t

Daytona 3 Gt (Models S35005Gt & S35006Gt)

The Daytona 3 GT, models S35005GT and S35006GT, is a three-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 47.4 x 22.8 x 40 inches. The ground clearance is 2.5 inches, and the turning radius is 40.2 inches. The unit includes rear anti-tip wheels, a headlight, a tail light, a front large carry basket, and a front bumper. The scooter can be disa

Daytona 4 Gt (Models S4501Gt & S4502Gt)

The Daytona 4 GT, models S45001GT and S45002GT, is a four-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 49.6 x 22.8 x 44 inches. The ground clearance is 3 inches, and the turning radius is 64 inches. This scooter includes rear anti-tip wheels, two headlights, a tail light, a front large carry basket, and a front bumper. It has anti-tippers.

Diestco Armrest Front Bag

The Diestco Armrest Front Bag is a caddy for a scooter or powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This large basketball-shaped and sized bag mounts to the end of armrests with the included straps and is detachable when not in use. Made of water-resistant nylon, this bag has a lightweight aluminum frame to retain the shape and a zippered top cover. DIMENSIONS: 7 inches high x 12 inches in diameter.

Diestco Basket Liner

The Diestco Basket Liner is a liner for scooter baskets designed for use by individuals with mobility or lower extremity disabilities. Made of water-resistant nylon, this liner has a zippered top. DIMENSIONS(WxLxD): 13 x 10 x 7 inches.

Diestco Deluxe Scooter Tiller Bag

The Diestco Deluxe Scooter Tiller Bag is a scooter fron pouch designed for use by individuals with lower extremity or mobility disabilities. Made of watter-resistant nylon, this bag has a front zippered pocket, a front mesh pocket, a side pocket, and an inside pocket. It attaches to the handlebars and can be mounted in front or behind the tiller. DIMENSIONS(WxLxD): 9 x 12 x 3 inches.

Diestco Deluxe Seatback Bag

The Diestco Deluxe Seatback Wheelchair Bag is a wheelchair or scooter back pouch designed for use by individuals with lower extremity, severe physical, or mobility disabilities or spinal cord injury. Made of water-resistant nylon, this pouch attaches to the seat back with the included harness-style mount. The bag can be used with captain-style scooter seats or with wheelchairs with push handles. The bag has several pockets, including a back mesh pocket, a zippered back pocket, side pockets, and

Diestco Extra Large Armrest Saddle Bag (Model 2131)

The Diestco Extra Large Armrest Saddle Bag, model B2131, is a wheelchair or scooter side pouch designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of water-resistant nylon, this pouch mounts on a scooter or powered wheelchair armrest and has a front zippered pocket, mesh pockets in front and on the sides, an inside pocket, side loops, and a secret pocket. DIMENSIONS(WxLxD): 12 x 16 x 2 inches.

Diestco Fabric Cane And Crutch Holders (Models B6213 & B6313)

The Diestco Fabric Cane and Crutch Holders are cane or crutch holders for wheelchairs or scooters side pouch designed for use by individuals with mobility, walking, or lower extremity disabilities. Made of water-resistant nylon, this carrier is shaped similarly to a golf bag and is available with a mounting system for use on captain-style scooter seats or wheelchairs without push handles (model B6213) or on wheelchairs with push handles (model 6313).

Diestco Large Armrest Saddle Bag (Model B2125)

The Diestco Extra Large Armrest Saddle Bag, model B2131, is a wheelchair or scooter side pouch designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of water-resistant nylon, this pouch mounts on a scooter or powered wheelchair armrest and has a variety of pockets and compartments. DIMENSIONS(WxLxD): 9 x 12 x 3 inches.

Diestco Monster Seatback Bag (Model B1113)

The Diestco Monster Seatback Bag, model B1113, is a wheelchair or scooter back pouch designed for use by individuals with lower extremity, severe physical, or mobility disabilities or spinal cord injury. Made of water-resistant nylon, this pouch attaches to the seat back with the included harness-style mount. The bag can be used with captain-style scooter seats or with wheelchairs with push handles. The bag has a lightweight aluminum frame to keep it open. DIMENSIONS(WxLxD): 13 x 18 x 10 inches.

Diestco Standard Armrest Saddle Bag (Model B2111)

The Diestco Standard Armrest Saddle Bag, model B2111, is a wheelchair or scooter side pouch designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of water-resistant nylon, this pouch can be mounted on the inside or outside of an armrest on a scooter or wheelchair. This pouch has one flap-covered main compartment and two small outside pockets for a cell phone or glasses. DIMENSIONS(WxLxD): 10 x 8 x 3 inches.

Diestco Standard Seatback Wheelchair Bag

The Diestco Standard Seatback Wheelchair Bag is a wheelchair or scooter back pouch designed for use by individuals with lower extremity, severe physical, or mobility disabilities or spinal cord injury. Made of water-resistant nylon, this pouch attaches to the seat back with the included harness-style mount. The bag has a zippered top. DIMENSIONS: 12 x 12 x 3 inches.

Elite

The Elite is a 3-wheeled scooter designed for indoor and outdoor use by individuals with lower extremity and mobility disabilities. FRAME (LxWxH): 43 x 22 x 37 inches, foldable for transport or storage. The Elite has an underbody ground clearance of 3.65 inches and a turning radius of 35 inches. Available colors are red, blue and silver. A detachable basket located under the seat is included. CONTROLS: An analog battery gauge and a battery indicator light are located at the top of the tiller bet

Emu Max

The EMU-Max is a three wheeled mobility scooter designed for use by individuals with lower extremity or mobility disabilities. This scooter offers the user the option of sitting or standing while riding. The EMU-Max's special standing design offer users eye-to-eye contact with individuals who are standing upright. FRAME: The EMU-Max is constructed of a white and chrome finish frame. It has collapsible, height adjustable handlebars; front LED headlight; rear tail and brake lights, left and right

Escort (Model 3200)

The Escort, model 3200, is a 3-wheeled powered scooter designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME (WxLxH): The scooter frame is 24 x 42 x 42 to 49 inches and the turning radius is 35 inches. It is available in midnight blue or burgundy red. This scooter is equipped with 5-inch rear anti-tippers. Three-piece construction allows for disassembly for storage and transport. CONTROLS: Integrated microprocessor-based control bo

Escort (Model 4300)

The Escort 4300 is a four-wheeled powered scooter designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (WxLxH): The scooter frame is 24 x 44 x 42 to 49 inches. The turning radius is 37 inches. this scooter is available in midnight blue or burgundy red and is equipped with five-inch rear anti-tippers. Three-piece construction allows for disassembly for storage and transport. CONTROLS: Integrated microprocessor-based control box mounted on T-sh

Ez-Shopper 8000

The EZ-Shopper 8000 is a four-wheeled scooter designed for use by retail customers with mobility, walking or lower extremity disabilities or spinal cord injury. This model is designed for use in grocery stores and other retail establishments with wider aisles. FRAME (HxLxW): 38 x 55 x 26 inches. The scooter has a heavy duty 1.25-inch steel frame with shock-absorbing and dent-resistant decks. The rear deck flips up to access motor and batteries. It has a reinforced tiller column with an added bra

Folding Safety Flag

The Folding Safety Flag is a safety flag designed for use on manual or powered wheelchairs or scooters. Designed to increase visibility, this penant-shaped flag has a folding shaft that enables the flag to fold below the user's head when entering and exiting vehicles or when not in use. COLOR: The flag is orange.

Forever Lever

The Forever Lever is a replacement scooter controller designed for use with Rascal, Liteway, and Fold & Go 370 mobility scooters. The unit includes an engager lever, handlebar mounting bracket, a long-life potentiometer, wiring harness, and installation instructions. The Forever Lever has been tested to withstand repeated usage up to 2,000,000 cycles; extreme hot and cold in temperatures from -104 to 248 degrees Fahrenheit; vibrations more extreme than driving over rough terrain for 24 hours

Freedom

The Freedom is a three-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with a front mesh basket. FRAME (LxW): 40 x 21 inches. Ground clearance is 2.8 inches and the turning radius is 30 inches. The scooter is available in red and disassembles for transport and storage. The frame is equipped with a tow handle to enable the scooter to be pulled across level surfaces. RWD: Rear wheel transaxle drive. CONTROLS: Controls are located on the adjustab

Frs 3-D Fixed Position Wheelchair Mount

The FRS 3-D Fixed Position Wheelchair Mount is a communicator mounting kit for wheelchair or scooter designed for use by individuals with communication and mobility, neurological or severe physical disabilities. Designed for use with the ComLink communicators (see separate entries), the flexible mount system is available with a variety of frame clamps to allow attachment to most wheelchair or scooter configurations. The ComLink communicator attaches to the mount by sliding the communicator's mou

Frs 3-D Folding Wheelchair Mount

The FRS 3-D Folding Wheelchair Mount is a communicator mounting kit for wheelchair or scooter designed for use by individuals with communication and mobility, neurological or severe physical disabilities. Designed for use with the ComLink communicators (see separate entries), this flexible mount system is available with a variety of frame clamps to allow attachment to most wheelchair or scooter configurations. The ComLink communicator attaches to the mount by sliding the communicator's mount pla

Frs 3-D Swing-Away Wheelchair Mount

The FRS 3-D Swing-Away Wheelchair Mount is a communicator mounting kit for wheelchair or scooter designed for use by individuals with communication and mobility, neurological or severe physical disabilities. Designed for use with the ComLink communicators (see separate entries), this flexible mount system is available with a variety of frame clamps to allow attachment to most wheelchair or scooter configurations. The ComLink communicator attaches to the mount by sliding the communicator's mount

Heartway Frontier Pf1 4 Wheel Power Scooter

The Heartway Frontier PF1 4 Wheel Power Scooter is a 4-wheeled heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include front basket, headlight, directional signals, and rear view mirror. FRAME (LxW): 56.3 x 25.2 inches. Rear anti-tippers are standard.C ONTROLS: Dynamic Rhino 110-amp controller with multi-function ajustable tiller and handle bars. SEAT: 18- to 22-inch swivel captain's seat. UPHOLSTERY: Contoured, padded vinyl seat. ARMRESTS

Hurricane (Model Pmv5001)

The Hurricane, model PMV5001, is an all-terrain four-wheeled scooter designed for outdoor use by people with physical disabilities or limited mobility. Standard features include a fully- directional light package, a rear view mirror, and a front basket. FRAME (LxW): 52 x 24 inches with a turning radius of 65 inches. The wheel base is 37 inches. The ground clearance is 4 inches. Rear anti-tips are included. The scooter disassembles without tools into seven pieces for transport and storage. The bo

Large Glove Box

The Large Glove Box is an under seat caddy for a wheelchair or scooter designed for use by individuals with mobility disabilities. Made of water-resistant nylon, this caddy attaches under the seats of most scooters and motorized wheelchairs with the included hook-and-loop straps. DIMENSIONS: 12 x 5 x 9 inches.

Legend Xl

The Legend XL is a four-wheeled scooter designed specifically for outdoor use by people with physical disabilities or limited mobility. FRAME (LxW): 52 x 24 inches with a turning radius of 36 inches and a ground clearance of 5.5 inches. The frame disassembles without tools for transport and storage. The champagne-colored body features fenders and a covered battery area. CONTROLS: Finger-tip controls are located on the tiller with an on/off key with automatic shutoff. RWD: Sealed one-piece rear-w

Luggie

The Luggie is a mobility scooter designed for use by individuals with mobility disabilities. FRAME (LxWxH): 39 x 18 x 33.5 inches. The wheelbase is 29 inches. The deck height is 5 inches. The ground clearance is 2.5 inches, and the turning radius is 35.5 inches. Folded, the unit is 25.4 inches high; with the seat and tiller folded, the scooter is 24 inches high. This scooter has an aluminum folding frame and can be assembled and disassembled without tools. The scooter is available in red, blue,

Mini Phantom 3 Wheel Compact Scooter (Models S35001692 & S35002692)

The Mini Phantom 3 Wheel Compact Scooter is a 3-wheel scooter designed for indoor or outdoor use by persons with mobility disabilities. FRAME (HxLxW): 35 x 37 x 21 inches. The turning radius is 37 inches and ground clearance is 2 inches. The frame disassembles into three pieces for transport. Anti-tippers are standard. Available colors are red (model S35001692) or blue (model S35002692). CONTROLS: PG S-Drive 45A controller with finger pull throttle. SEAT: Height- adjustable, fold-down seat. UPHO

Mobility Seat Cover

The Mobility Seat Cover is a seat accessory for a scooter designed for use by individuals with mobility disabilities. These seat covers are professionally sewn with durable decorator upholstery fabrics and are machine washable. They attach to the seat with heavy-duty Velcro. The seat cover includes bonded Dacron padding for extra comfort. Depending on the seat style, they either fit over the existing manufacturer’s vinyl seat cover or the vinyl seat cover can be removed and replaced. DIMENSIONS

Odyssey (Models S45200 & S45300)

The Odyssey, models S45200 and S45300, is a heavy-duty four-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 55.1 x 26.4 x 39.8 inches. The ground clearance is 4.5 inches, and the turning radius is 70 inches. This scooter includes rear anti-tip wheels, heavy-duty front and rear bumpers, a front large carry basket, front and rear lights with tur

Osprey 4410 4-Wheel Heavy Duty Scooter (Models Osprey4410Mg20Cs & Osprey4410Mg22Cs)

The Osprey 4410 4-Wheel Heavy Duty Scooter, models OSPREY4410MG20CS and OSPREY4410MG22CS, is a heavy-duty four-wheel scooter designed for outdoor use by individuals with lower extremity, mobility, neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 54 x 29 x 50 inches. The ground clearance is 7 inches, and the turning radius is 73 inches. This scooter includes a headlight, a horn, turn signals, dual rear view mirrors, a front plastic basket, and

Pacesaver Eclipse Premier

The Pacesaver Eclipse Premier is a four-wheeled scooter designed primarily for outdoor use by individuals with mobility disabilities. FRAME (LxW): Overall, the scooter is 49.75 x 25.75 inches with a 4.75-inch ground clearance and a 44-inch turning radius. The wheelbase is 36.25 inches. The scooter disassembles for transport. The scooter comes in a choice of ocean blue, midnight black, or candy apple red. CONTROLS: Tiller-mounted controls are standard. The control box includes a battery-level ind

Pacesaver Espree Atlas & Espree Atlas 5

The PaceSaver Espree Atlas and the PaceSaver Espree Atlas 5 are three-wheeled scooters designed for indoor or outdoor use by large individuals with lower extremity and mobility disabilities. FRAME (LxW): 45.5 x 24.75 inches with a 4.5-inch ground clearance and a 35-inch turning radius. The wheelbase is 33.5 inches. The scooters disassemble for transport. A stretch frame is optional. The Espree Atlas and Espree Atlas 5 are available in ocean blue, midnight black, or candy apple red. CONTROLS: Til

Pacesaver Espree Premier 9-Inch & 10-Inch

The Pacesaver Espree Premier 9-Inch and 10-Inch are three-wheeled scooters designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 45 x 24 inches with a 4.25-inch ground clearance and a 34.5-inch turning radius on the 9-inch model. The 10-inch model is 45 x 24 or 24.75 inches with a ground clearance of 4.5 inches and a turning radius of 35 inches. The scooter disassembles for transport. An optional stretch front frame provides an extra four inches of foot space

Pacesaver Espree Titan

The Pacesaver Espree Titan is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 45.5 x 24.75 inches with a 4.5-inch ground clearance and a 35-inch turning radius.The wheelbase is 33.5 inches. The scooter disassembles for transport. A stretch frame is optional. The scooter comes in a choice of ocean blue, midnight black, or candy apple red. CONTROLS: Tiller-mounted controls with thumb levers are standard. The control box includes a

Pacesaver Fusion250 & Pacesaver Fusion350

The PaceSaver Fusion250 and Fusion350 are three-wheeled scooters designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 45.5 x 22 inches (Fusion250) or 45.5 x 23.5 inches (Fusion350), and both models have a 2-inch ground clearance. The turning radius is 29.5 inches for both models. The scooters disassemble for transport, and they are available in ocean blue, midnight black, or candy apple red. CONTROLS: Tiller-mounted controls with thumb levers are standard. T

Pacesaver Fusion450 & Pacesaver Fusion500

The PaceSaver Fusion450 and Fusion500 are three-wheeled scooters designed for indoor or outdoor use by large individuals with mobility disabilities. FRAME (LxW): 48 x 24 inches, and both models have a 2-inch ground clearance. The turning radius is 33.25 inches for both models. Both models disassemble for transport, and they are available in ocean blue, midnight black, or candy apple red. CONTROLS: Tiller-mounted controls with thumb levers are standard. The control box includes a battery-level in

Pacesaver Plus Iii Atlas

The PaceSaver Plus III Atlas is a three-wheeled scooter designed for use indoors or outdoors by large individuals with lower extremity or mobility disabilities. FRAME (LxW): 45 x 24.75 inches with a 4.5-inch ground clearance and a 35-inch turning radius. The wheel base is 33.5 inches. The PaceSaver Plus III Atlas disassembles for transport. This scooter is available in ocean blue, midnight black, or candy apple red. CONTROLS: Tiller-mounted controls with thumb levers are standard. The control bo

Pacesaver Plus Iii Jr. 9-Inch And 10-Inch

The PaceSaver Plus III Jr. is a three-wheeled scooter designed for indoor or outdoor by individuals with mobility disabilities. FRAME (LxW): 42 x 24 (10-inch) or 23 inches (9-inch) with a 4.5-inch (10-inch) or 4-inch (9-inch) ground clearance and a 32-inch turning radius. The wheel base is 30 inches. The scooter disassembles for transport. It is available in candy apple red. CONTROLS: This scooter features a dual moisture protected Snag Guard throttle and 110 amp power boost battery saver contr

Pacesaver Plus Iii Premier 9-Inch & 10-Inch

The PaceSaver Plus III Premier is a three-wheeled scooter designed for use indoors or outdoors by individuals with mobility disabilities. FRAME (LxW): The 9-inch model is 45.5 x 24 inches with a 4.25-inch ground clearance and a 34.5-inch turning radius. The wheelbase is 33.5 inches. The 10-inch model is 45 x 24.75 inches with a ground clearance of 4.5 inches and a turning radius of 35 inches. The scooter disassembles for transport. This scooter is available in ocean blue, midnight black, or cand

Pacesaver Plus Iii Titan

The PaceSaver Plus III Titan is a three-wheeled scooter designed for use indoors or outdoors by individuals with mobility disabilities. FRAME (LxW): 45 x 24.75 inches with a 4.5-inch ground clearance and a 35-inch turning radius. The scooter disassembles for transport. An optional stretch front frame provides an extra four inches of foot space. This scooter is available in ocean blue, midnight black, or candy apple red. CONTROLS: Tiller-mounted controls with thumb levers are standard. The contro

Phantom (Models S35001 & S35002)

The Phantom is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. A large carry basket and a headlight are standard. FRAME (LxW): 38 x 19 inches. The scooter is available in red (model S35001) or blue (model S35002) and comes with anti-tippers. The scooter has a 32.3-inch turning radius and can be disassembled in three pieces for transport. CONTROLS: Adjustable tiller and "Finger-Pull" throttle. SEAT: Height- adjustable seat. ARMRESTS: Flip-back

Phoenix 3 Wheel Compact Scooter (Model S35010)

The Phoenix 3 Wheel Compact Scooter, model S35010, is a three-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight and a front large carry basket. FRAME (LxWxH): The overall dimensions are 37.8 x 18.9 x 34.6 inches. The ground clearance is 2 inches and the turning radius is 32.3 inches. It has rear 2-inch anti-tippers. The scooter can be disassembled into four

Phoenix 4 Wheel Compact Scooter (Model S35015)

The Phoenix 4 Wheel Compact Scooter, model S35015, is a four-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. This scooter includes a headlight and a large carry basket. FRAME (LxW): The overall dimensions are 37.8 x 20 inches. The ground clearance is 2 inches, and the turning radius is 44 inches. It has 2-inch rear anti-tip wheels. The scooter can be disassembled into 4 pieces for sto

Phoenix Hd3

The Phoenix HD3 is a heavy-duty three-wheel scooter designed for use by individuals with lower extremity, mobility, neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight and a large front carry basket. FRAME: The scooter can be disassembled into 4 pieces for transport. It has rear anti-tip wheels and a plastic basket and headlight on the front of the tiller. Two sets of interchangeable color accent panels, in red and blue, are included. CONTROLS: Electronic c

Phoenix Hd4

The Phoenix HD4 is a heavy-duty four-wheel scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME: This scooter includes a headlight and a large front carry basket mounted on the tiller and rear anti-tip wheels.The scooter can be disassembled into 4 pieces for transport. Two sets of interchangeable color panels in red and blue are included. CONTROLS: Electric controller mounted on an adjustab

Pilot 2310 3-Wheel Medium Size Scooter (Models Pilot2310Bl18Cs, Pilot2310Bg18Cs, Pilot2310Bl20Cs & Pilot2310Bg20Cs)

The Pilot 2310 3-Wheel Medium Size Scooter, models PILOT2310BL18CS, PILOT2310BG18CS, PILOT2310BL20CS and PILOT2310BG20CS, is a three-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight, a horn, turn signals, dual rear view mirrors, a front bumper, and a front basket. FRAME (LxWxH): The overall dimensions are 47 x 22 x 38 inches. The ground clearance is 3 inch

Pilot 2410 4-Wheel Medium Size Scooter (Models Pilot2410Bl18Cs, Pilot2410Bg18Cs, Pilot2410Bl20Cs, & Pilot2410Bg20Cs)

The Pilot 2410 4-Wheel Medium Size Scooter, models PILOT2410BL18CS, PILOT2410BG18CS, PILOT2410BL20CS and PILOT2410BG20CS, is a four-wheel scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWXH): The overall dimensions are 47 x 22 x 38 inches. The ground clearance is 3 inches, and the turning radius is 54 inches. This scooter includes rear anti-tip wheels, a headlight, a horn, turn signa

Prowler 3310 3-Wheel Full Size Scooter (Models Prowler3310Mg20Cs & Prowler3310Mg22Cs)

The Prowler 3310 3-Wheel Full Size Scooter, models PROWLER3310MG20CS and PROWLER3310MG22CS, is a heavy-duty three-wheeled scooter designed for outdoor use by large or obese individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight, a horn, turn signals, dual rear view mirrors, a front bumper, and a front basket. FRAME (LxWxH): The overall dimensions are 51 x 26 x 49 inches. The ground clearance is 5 inches, and the tu

Prowler 3410 4-Wheel Full Size Scooter (Models Prowler3410Mg20Cs & Prowler3410Mg22Cs)

The Prowler 3410 4-Wheel Full Size Scooter, models PROWLER3410MG20CS & PROWLER3410MG22CS, is a heavy-duty four-wheeled scooter designed for outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 51 x 26 x 49 inches. The ground clearance is 5 inches, and the turning radius is 70 inches. This scooter includes rear anti-tip wheels, a headlight, a horn, turn signals, dual rear view mirror

Rally

The Rally is a three-wheeled scooter designed for indoor and outdoor use by individuals with mobility disabilities. A front basket is included with this scooter. FRAME (LxW): 41 x 21 inches with a ground clearance is 3.5 inches and a turning radius of 31 inches. The scooter disassembles into five pieces for storage and transport and is available with a choice of a candy apple red or teal rear console and shroud; the front shroud is gray. Rear anti-tips are standard. CONTROLS: Electronic control

Rear View Mirror For Scooter

The Rear View Mirror for Scooter is designed to create greater visibility for scooter users without requiring that the rider turn his/her head or body. This adjustable unit mounts to the end of the scooter handlebar and has a plastic base and a glass mirror. DIMENSIONS: The mirror is 3.5 inches in diameter. WEIGHT: 1 pound.

Royale 3

The Royale 3 is a 3-wheeled scooter designed for outdoor use by individuals with lower extremity and mobility disabilities. This scooter has independent suspension and can be used on sidewalks, streets and dedicated paths where permitted. FRAME (LxWxH): 62 x 29 x 53 inches. The seat and tiller fold for transport or storage. The Royale 3 has an underbody ground clearance of 6 inches and a turning radius of 49.5 inches. Available colors are burgundy red, midnight black and diamond silver. A detach

Royale 4

The Royale 4 is a 4-wheeled scooter designed for outdoor use by individuals with lower extremity and mobility disabilities or as an alternative to driving. This scooter has independent front suspension and can be used on sidewalks, streets and dedicated paths where permitted. FRAME (LxWxH): 62 x 29 x 53 inches. The seat folds for transport or storage. The Royale 4 has an underbody ground clearance of 6 inches and a turning radius of 63 inches. Available colors are burgundy red, midnight black an

Safari

The Safari is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 40 or 42 x 22 inches. Ground clearance is 3.5 inches. The scooter is available in white, red, hunter green, or blue and disassembles for transport and storage. RWD: Rear wheel transaxle drive. CONTROLS: Controls are located on the adjustable tiller. SEAT: The removable swivel seat adjusts from 15 to 18 inches high in one-inch increments. A powered seat lift is optional

Safari Ltd

The Safari is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 40 or 42 x 22 inches. Ground clearance is 3.5 inches. The scooter is available in red and disassembles for transport and storage. RWD: Rear wheel transaxle drive. CONTROLS: Controls are located on the adjustable tiller. SEAT: The removable swivel seat adjusts from 15 to 18 inches high in one-inch increments. A powered seat lift is optional. UPHOLSTERY: Fabric or vinyl

Scooter Canopy

DO IT YOURSELF ENTRY --- PURPOSE: To protect an individual who uses a scooter who is sun sensitive from sun exposure. This canopy is detachable and folds for transport and storage. The frame is made from steel and aluminum tubing and it is covered in sunbrella fabric (nylon or nylon/urethane material can also be used). Scaled drawings for the frame are available from the originator. OPTIONS: Plastic windows can be added for those seeking rain/snow protection rather than sun protection. TITLE: Th

Scooter Cape

The Scooter Cape is designed for use by individuals who use a motorized scooter for mobility due to generalized weakness, neurological or motor impairments. It provides complete wind and rain protection from head to toe, including your scooter. There are Velcro slots to accommodate mirrors while retaining maximum waterproofing. The clear front panel enables you to clearly view the controls while ensuring that you can safely use your lights. It also features an easy to use single zip fastening, t

Scooter Cosy

The Scooter Cosy is designed for use by individuals who use a motorized scooter for mobility due to generalized weakness, neurological or motor impairments. It is a quilted, thermal fleece lined blanket which acts like a sleeping bag for the lower body. The unique advantage is the open base enabling you to position your feet either side of the tiller (steering column). Your feet remain dry with a nylon shoe protector. SIZES: Medium and large. DIMENSIONS (HxLxW): Medium: Chest 111 centimeters; L

Scooter Cover (Model 0125)

The Scooter Cover, model 0125, is a scooter cover designed for use by individuals with mobility disabilities or spinal cord injury. Made of weather-resistant nylon, this cover features elasticized, reinforced seams that fit the cover to the scooter. There are grommets along the bottom edge if the cover needs to be tied down. A cover storage bag is included. DIMENSIONS (HxLxW): 33 x 50 x 22 inches. COLOR: Black. WARRANTY: One-year limited warranty.

Scooter Footrest

CUSTOM ADAPTATION PURPOSE: To provide a footrest on a scooter for an individual with severe arthritis. Because the individual was unable to bend his legs, he could not use the existing scooter floor/footrest. Instead, he rested his feet on the mudguards. However, this posed a problem when traveling downhill; because the rider could not brace himself, he would slide forward. To solve the problem, a new footrest was constructed of square metal tubing and attached to the front of the scooter, enab

Scooter Leg Cape

The Scooter Leg Cape is designed for use by individuals who use a motorized scooter for mobility due to generalized weakness, neurological or motor impairments. It provides lower body protection that is waterproof with a thermal, quilted fleece lining for extra warmth. The leg cape secures around the scooter chair with a simple braid and clip fastening DIMENSIONS (HxLxW): Length 100 centimeters. COLOR: Navy. WARRANTY/GUARANTEE: As stated by the manufacturer.

Scooter Pack (Model Ez0122)

The Scooter Pack is a scooter back pouch designed for use by individuals with mobility disabilities or spinal cord injury. Made of weather-resistant nylon, this pack attaches to the back of scooter seat using a soft mesh that slips over the back. It includes headrest grommets if needed. The Scooter Pack has a large interior compartment and a deep side pockets as well as a carrying handle for use as a portable tote. DIMENSIONS (HxLxW): 6 x 16 x 14.5 inches. COLOR: Black.

Scooter Seat Cover

The Scooter Seat Cover is a seat accessory for a scooter designed for use by individuals with lower extremity or mobility disabilities. This weatherproof cover secures under the seat using the locking drawstring and can be used while the scooter is being driven.

Scooter Single Oxygen (Model Ez0142)

The Scooter Single Oxygen is an oxygen cylinder carrying case for a scooter or a powered wheelchair designed for use by individuals with respiratory disabilities and mobility disabilities or spinal cord injury. Made of water-resistant 420-denier nylon, the case holds "D" and "E" cylinders by adjusting using a bottom snap. An adjustable extra-long top strap with buckle attachment secures the case to most scooter and powered wheelchair seats, and two bottom straps fasten it to the scooter or wheel

Scooter Tiller Cover

The Scooter Tiller Cover is designed to protect scooter controls from rain during use. Made of weather-resistant material, this cover covers the tiller and handlebars. Hand openings enable the user to grasp the handlebars while keeping the hands protected from the weather. The cover has a clear vinyl top to allow the control panel to remain visible. SIZES: Small or large.

Scooter Ventilator Mount

DO IT YOURSELF PURPOSE: To provide ventilator users with a means of carrying the ventilator on a scooter. Attach a heavy-duty key rings to the armrest posts using nylon web straps with clips that can clip on the handle rings of the ventilator to allow the ventilator to hang from the armrests behind the seat. Place the ventilator battery on the scooter floor between the user's legs. Use the ventilator's external direct current (DC) battery cord to connect the battery to the ventilator. Secure co

Shabbat Module

The Shabbat Module is a scooter controller that can be added to the Amigo RT Express, Amigo RD and Amigo HD scooters (see separate entries). It is designed for use by Orthodox Jews with mobility disabilities. The Shabbat Module is halachically-approved and certified by a representative of the Zomet Institute-Israel. It is designed to allow individual participation in full observance of the Sabbath. After the module is installed, the scooter user can activate the Shabbat mode using a toggle swit

Smartsensor

The SmartSensor is a collision prevention system for scooter designed for use by people with mobility disabilities. The SmartSensor can be added to the Amigo Classic FD, Amigo RT Express, Amigo RD and Amigo HD scooters (see separate entries). It can detect objects up to 30 inches ahead and when an object is detected, it gently slows the scooter’s forward speed, bringing it to a gradual stop. When the SmartSensor is activated, the scooter is limited to a top speed of 2.3 miles per hour so that th

Soft Basket For Scooter Tillers

The Soft Basket for Scooter Tillers is a front mesh basket for individuals who use scooters. Features front mesh pockets and a zippered top to keep items safe. The Soft Basket for Scooter Tillers has the same cubic inch holding capacity as a standard wire basket. This scooter basket is constructed of water resistant fabric .

Solo

The Solo is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 45.5 x 24 inches. Ground clearance is 4 inches. The scooter is available in red, blue, or hunter green and disassembles for transport and storage. RWD: Rear wheel transaxle drive. CONTROLS: Controls and key lock are located on the adjustable tiller. SEAT: The removable swivel seat adjusts from 17 to 20 inches high in one-inch increments. A powered seat lift is optional.

Solo Hd

The Solo HD is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 45.5 x 24 or 26 inches. Ground clearance is 4 inches with 10-inch rear wheels. The scooter is available in red, blue, or hunter green and disassembles for transport and storage. RWD: Rear wheel transaxle drive. This scooter is equipped with added special gearing to provide approximately 20 percent more power than the Solo scooter (see separate entry). CONTROLS: Contr

Solo Iv & Solo Iv Hd

The Solo IV and the Solo IV HD are four-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 48.5 x 24 inches. Ground clearance is 4 inches with 10-inch rear wheels. These scooters are available in red or blue and disassemble for transport and storage. RWD: Rear wheel transaxle drive. CONTROLS: Controls and key lock are located on the adjustable tiller. SEAT: The removable swivel seat adjusts from 17 to 20 inches high in one-inch increments.

Solo Xt-550

The Solo XT-550 is a four-wheeled scooter designed for indoor or outdoor use by large individuals with mobility disabilities. FRAME (LxW): 48 x 24 inches (26 inches wide with armrests). Ground clearance is 4 inches with 10-inch rear wheels. This scooter has additional aluminum crossbracing for strength and non-skid front fender footrests. The scooter is available in red or blue and disassembles for transport and storage. RWD: Rear wheel transaxle drive. This scooter is equipped with added specia

Spirit

The Spirit is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 40 x 22 inches. Ground clearance is 3.5 inches and the turning radius is 30 inches. The scooter is available in white or red and disassembles for transport and storage. RWD: Rear wheel transaxle drive. CONTROLS: Controls are located on the adjustable tiller. SEAT: The removable swivel seat adjusts from 15 to 18 inches high in one-inch increments. A powered seat lift is

Spitfire 1310 3-Wheel Compact Scooter (Models Spitfire1310Bl16Fs & Spitfire1310Rd16Fs)

The Spitfire 1310 3-Wheel Compact Scooter, models SPITFIRE1310BL16FS and SPITFIRE1310RD16FS, is a three-wheeled scooter designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 42 x 19 x 36 inches. The ground clearance is 2 inches, and the turning radius is 43 inches. It has anti-tip wheels and a standard plastic front basket. The scooter can be disassembled into 5 pieces for transport

Spitfire 1410 4-Wheel Compact Scooter (Models Spitfire1410Bl16Fs & Spitfire1410Rd16Fs)

The Spitfire 1410 4-Wheel Compact Scooter, models SPITFIRE1410BL16FS and SPITFIRE1410RD16FS, is a four-wheel scooter designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 43 x 19 x 36 inches. The ground clearance is 2 inches, and the turning radius is 47 inches. It has anti-tip wheels and a standard plastic front basket. The scooter can be disassembled into 5 pieces for transport or

Spitfire Ex 1320 3 Wheel Compact Size Scooter (Models Spitfire132016Fs12 & Spitfire132016Fs21)

The Spitfire EX 1320 3 Wheel Compact Size Scooter, models SPITFIRE132016FS12 and SPITFIRE132016FS21, is a three-wheel scooter designed for use by individuals with lower extremity, mobility, neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 41 x 19 x 36 inches. The ground clearance is 3 inches, and the turning radius is 46 inches. It has rear anti-tip wheels and a standard plastic basket attached to the front of the tiller. The scooter can be d

Spitfire Ex 1420 4-Wheel Compact Scooter (Models Spitfire142016Fs21 & Spitfire142016Fs12)

The Spitfire EX 1420 4-Wheel Compact Scooter, models SPITFIRE142016FS21 and SPITFIRE142016FS12, is a four-wheeled scooter designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): 42 x 20 x 36 inches. The ground clearance is 3 inches, and the turning radius is 50 inches. It has rear anti-tip wheels and a standard plastic front basket with a removable liner bag. The scooter can be disassembled into 5 pieces for tr

Sportrider

The SportRider is a 3-wheeled scooter designed for outdoor use by individuals or couples with lower extremity and mobility disabilities or as an alternative to driving. The scooter comes with a single captain seat or a dual bench seat. It can be operated with either two G-24 (75-79 amp hour) batteries or two G-27 (85-100 amp hour) batteries. FRAME (LxWxH): 65 x 29/36 x 44 inches. The frame has motorcycle styling, and the seat folds down for transport or storage. The SportRider has an underbody g

Stand-N-Ride (Model Snr And Snr2)

The Stand-N-Ride, model SNR and SNR2, is a 3-wheeled scooter designed for use by individuals or couples with lower extremity and mobility disabilities. It can used while standing or sitting. FRAME (LxWxH): 36.3 x 25.3 x (48-36) inches with anti-tippers,It can be disassembled into two parts for transport or storage. The Stand-N-Ride has an underbody ground clearance of 2.75 inches and a turning radius of 22 inches. The only available color is black. An optional detachable basket can be attached i

Standard Scooter Tiller Bag

The Standard Scooter Tiller Bag is a storage bag for individuals who use scooters. The bag mounts to the scooter tiller handles both in front or behind the scooter tiller.The hook-and-loop straps prevent the bag from swinging on the scooter tiller.

Victory 10 3-Wheel Scooter (Model Sc610)

The Victory 10 3-Wheel Scooter, model SC610, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 45.25 x 22.25 inches. The turning radius is 42 inches and the ground clearance is 3 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering.

Victory 10 4-Wheel Scooter (Model Sc710)

The Victory 10 4-Wheel Scooter, model SC710, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 47x 22.25 inches. The turning radius is 54 inches and the ground clearance is 3 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering. OPTI

Victory 9 3-Wheel Scooter (Model Sc609)

The Victory 9 3-Wheel Scooter, model SC609, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities. FRAME (LxW): 43.5 x 22.125 inches. The turning radius is 40.25 inches and the ground clearance is 2 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering. OPTIONS: Cup holder;

Victory 9 4-Wheel Scooter (Model Sc709)

The Victory 9 4-Wheel Scooter, model SC709, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 45.5 x 22.5 inches. The turning radius is 51.5 inches and the ground clearance is 2.25 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering

Victory 9 Ps 3-Wheel Scooter (Model Sc609Ps)

The Victory 9 PS 3-Wheel Scooter, model SC609PS, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 43.5 x 22.125 inches. The turning radius is 41 inches and the ground clearance is 2 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steeri

Vita

The Vita is a 4-wheeled electric scooter designed for outdoor use by individuals with lower extremity and mobility disabilities. FRAME (LxWxH): 55.5 x 28 x 55 inches. The Vita has full independent suspension, an underbody ground clearance of 3.5 inches, and a turning radius of 50.5 inches. Available color is sunset orange with sparkles or silver. An optional black wire basket that attaches behind the seat is available, and a black, heavy-duty travel case can be added in place of the basket.. CON

Walk Aid Scooter

The Walk Aid Scooter is a lightweight, seated walking aid that is designed to take weight off lower extremities and thereby reduce back pressure. It is intended for individuals who have normal balance and have diabetic neuropathy or are experiencing back, hip, knee and foot pain. The Walk Aid Scooter can be used both indoors and outdoors. The all-terrain wheels with pneumatic tires can roll over carpet, uneven surfaces and rough pavement, and the scooter's narrow footprint allows it to be maneuv

Weatherbee Scooter Cover

The WeatherBee Scooter Cover is designed to protect scooters from dust or moisture during transport or storage. To use, slip the cover over the scooter and secure underneath using the locking drawstring. Grommets are also provided for additional fastening. The cover is available in standard or heavy-duty models. SIZES: Mini, regular, large, or super large. DIMENSIONS(HxWxL): The mini cover is 30 x 16 x 42 inches. The regular cover is 33 x 18 x 55 inches. The large cover is 33 x 28 x 55 inches. T

Weatherbreaker, The

The WeatherBreaker is a canopy for scooters designed to protect individuals who use scooters from the weather. This canopy is available in standard, vented, and maximum protection styles. The standard model is made of solid fabric. The vented model has mesh material on the sides and back instead of solid fabric to provide more ventilation for heat protection while still sufficiently protecting from sunlight and rain. The maximum protection model is the same as the vented model with the addition

Wheelchair / Walker / Scooter Bag

The Wheelchair / Walker / Scooter Bag is a caddy, or carrying bag, for wheelchairs, walkers, and scooters designed for individuals with mobility, balance, and walking disabilities or spinal cord injury. This bag attaches using adjustable straps and clip fasteners. Made of 100 percent cotton duck with Velcro closure, this bag features an outside pocket with a zippered compartment to store a cell phone and interior slots to store credit cards and identification. For wheelchair use, the bag can be

 
Processing...


Driving Walking/Biking Public Transit  Get Directions