Adult Powered Wheelchair

Results: 138

3G Arrow Rear Wheel Drive Power Wheelchair With Truetrack

The 3G Arrow Rear Wheel Drive Power Wheelchair with TrueTrack is a powered wheelchair designed for use by individuals with mobility, neurological, or lower extremity disabilities or spinal cord injury. TrueTrack technology translates the driver's commands to help keep the power chair on a true forward path and minimize the need for veer correction on slopes, thresholds, and uneven terrain. FRAME (LxW): 28.5 (short base) or 31.5 (long base) x 12 to 24 inches. The frame is available in silver, bla

6Runner 10 (Model 888Wnlm)

The 6Runner 10, model 888WNLM, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 42 x 23 x 46.4 inches. The ground clearance is 3 inches. The turning radius is 15.75 inches. The base is available in red. CONTROLS: VR2 Controller and VR2 Main Control Box. MWD: Mid-wheel drive with 0.6 horsepower. SEAT (WxDxH): 18 x 17.5 x 22 inche

6Runner 10 Deluxe (Model 858Wm)

The 6Runner 10 Deluxe, model 858WM, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 30 x 22 x 38.6 inches. The ground clearance is 3 inches. The turning radius is 18 inches. The base is available in red or blue. CONTROLS: Integral VSI Joystick Controller and VSI Controller Bracket. MWD: Mid-wheel drive with 0.8 horsepower. SEAT

6Runner 10 Rehab (Model 888Wnlm-R)

The 6Runner 10 Rehab, model 888WNLM-R, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxW): The overall dimensions, including the footplate, are 42 x 23 x 35.5 inches. The wheelbase is 33 x 23 inches with a ground clearance of 3 inches. The turning radius is 15.75 inches. The base is available in blue. CONTROLS: Integral VSI Joystick Controller. MWD: Mid-wheel drive with 0.8 horsepower.

6Runner 14 (Model 888Wnllhd)

The 6Runner 14, model 888WNLLHD, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 42 x 26 x 49 inches. The ground clearance is 2.75 inches. The turning radius is 23.5 inches. The base is available in red. CONTROLS: Programmable VR2 Joystick Controller with adjustable speed and battery life indicator. MWD: Mid-wheel drive with 1

Action Trackchair (Model Sm)

The Action Trackchair, model SM, is a powered sport wheelchair designed for use by children and adults of short stature with lower extremity, mobility, or neurological disabilities or spinal cord injury. This wheelchair is designed for off-road use, and it features a pair of caterpillar tracks instead of wheels. It has a turning radius of zero. FRAME (LxWxH): 42 x 33 x 38 inches. Length is 48 inches with rear idlers. The ground clearance is 3.5 inches. There are two accessory holders on each sid

Action Trackchair (Model St)

The Action Trackchair, model ST, is a powered sport wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. This wheelchair is designed for off-road use, and it features a pair of caterpillar tracks instead of wheels. It has a turning radius of zero. FRAME (LxWxH): 42 x (37, 39, 41 or 43) x 38 inches. Length is 48 inches with rear idlers. The ground clearance is 3.5 inches. There are two accessory holders on each side of the chair

Adventure

Adventure is an powered wheelchair designed for indoor or outdoor use by individuals with mobility disabilities or spinal cord injury. This fully modular wheelchair can climb curbs up to 3 inches high, or up to 5 inches with the optional curb climber. The parts were designed for use outdoors, including in damp meadows or light rain. The unit can climb an 18 percent incline with a 308 pound load. FRAME (HxLxW): 38 x 43 x 26.5 inches (including footrest). The chassis is 17 inches high x 36 inches

Amigo Escort

Amigo Escort is a powered transport wheelchair designed for indoor or outdoor use by individuals with lower extremity, mobility, neurological, or severe physical disabilities or spinal cord injury. This chair is equipped with an oxygen tank holder FRAME (HxLxW): 37.3 x 32.7 x 24.1 inches. The chair has a steel platform painted cinnamon red, with a turning radius of 21 inches and an underbody ground clearance of 3.3 inches. CONTROLS: ASIC MPC electronic controller with HI/LO control with On/Off

Barrett Gem

The Barrett Gem is a powered wheelchair designed to provide the user with the chair best suited to his/her individual needs and comfort. FRAME: 22 x 30 x 14 inches folded size; tubular steel, chronium plated. CONTROLS: Joystick - fully programmable for speed/acceleration and can be supplied with remote, chin, or attendant control capabilities. SEAT: 14 x 16 / 15 x 16 / 17 x 17 inch. ARMRESTS: Detachable for tray usuage with molded arm pads. BRAKES: Electro-magnetic. WHEELS: 7 inch or 12.5 inch a

Beach Cruzr & Beach Cruzr 4 Two

The Beach Cruzr and the Beach Cruzr 4 Two are powered beach wheelchairs designed for use by individuals with mobility disabilities. The Beach Cruzr is an aluminum beach chair mounted on four wheels that can be used on sand. The Beach Cruzr 4 Two is also mounted on four wheels and can be used on sand, and in addition it features two seats. FRAME (LxWxH): Both chairs have a folding aluminum frame, stainless steel hardware, and an extended foot area to allow the user's legs to be stretched in front

Black Hawk Chief (Model 107-Zrx)

The Black Hawk Chief, model 107-ZRX, is a powered stand up wheelchair designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. The system allows variable blendability of all positions, and compensates mechanically for body position by moving armrests and positioning devices such as lateral supports. FRAME (LxW): 38 x 23 inch frame. Ground clearance is 4 inches without anti-tipper wheels; turning radius is 29 inches. Custom sizing is available for indiv

Breez 1025

The Breez 1025 is a powered transport wheelchair designed for indoor or outdoor use by individuals with lower extremity, mobility, neurological, or severe physical disabilities or spinal cord injury. The chair is operated by an attendant or caregiver who walks behind the chair. This chair is equipped with a standard stainless steel IV pole. FRAME (HxLxW): 42.5 x 27 x 26 inches. The overall length with footrests is 50 inches. The chair has a steel platform under the seat for carrying cargo and fr

Breez 1025-G

The Breez 1025-G is a powered transport wheelchair designed for indoor or outdoor use by individuals with lower extremity, mobility, neurological, or severe physical disabilities or spinal cord injury. The chair is operated by an attendant or caregiver who walks behind the chair. This chair is equipped with a standard stainless steel IV pole. FRAME (LxW): 47.5 x 34 inches with armrests and footrests. The chair has a steel platform under the seat with 1.8 cubic feet for carrying cargo, and it has

C300 Corpus

The C300 Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 43 x 24.25 to 28.5 x 42.5 inches. Minimum turning radius is 25 inches. The C300 Corpus has a ground clearance of 3 inches and independent suspension. The base frame is available in crystal blue, vintage wine, metallic green, platinum silver, black onyx, popstar pink, titan blue and chili pepper red. Front anti-tippers are included.

C300 Ps

The C300 PS is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 43 x 24.25 to 28.5 inches. Minimum turning radius is 25 inches. The C300 PS has a ground clearance of 3.1 inches and independent suspension. The base frame is available in crystal blue, vintage wine, metallic green, platinum silver, black onyx, popstar pink, titan blue and chili pepper red. Front anti-tippers are included. CONTROLS: VR2 d

C350 Corpus

The C350 Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 42 x 24.25 to 28.5 x 44 inches. Minimum turning radius is 37 inches. The C350 Corpus has a ground clearance of 3.1 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, platinum silver and black onyx. Back anti-tippers are included. CONTROLS: Integrated progr

C350 Ps

The C350 PS is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 42 x 24.25 to 28.5. Minimum turning radius is 37 inches. The C350 PS has a ground clearance of 3.1 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, platinum silver and black onyx. Back anti-tippers are included. CONTROLS: Integrated programmable R-Net joysti

C400 Corpus

The C400 Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 42 x 24.25 to 28.5 x 44 inches. Minimum turning radius is 26 inches. The C400 Corpus has a ground clearance of 2.8 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, metallic green and black onyx. Back anti-tippers are included. CONTROLS: Integrated progra

C400 Lowrider

The C400 Lowrider is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 42 x 24.25 to 28.5 x 42.5 inches. Minimum turning radius is 26 inches. The C400 Lowrider has a ground clearance of 2.8 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, metallic green and black onyx. Back anti-tippers are included. CONTROLS: Integrated

C500 Corpus

The C500 Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 49.5 x 25.75 to 28.5 x 52.5 inches. Minimum turning radius is 28 inches. The C500 Corpus has a ground clearance of 2.75 inches and 4-wheel adjustable independent suspension. The base frame is available in arctic white, crystal blue, vintage wine, platinum silver, metallic green and black onyx. Back anti-tippers are included. CONTROL

C500 Lowrider

The C500 Lowrider is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 49.5 x 25.75 to 28.5 x 47.5 inches. Minimum turning radius is 28 inches. The C500 Lowrider has a ground clearance of 2.75 inches and 4-wheel adjustable independent suspension. The base frame is available in arctic white, crystal blue, vintage wine, platinum silver, metallic green and black onyx. Back anti-tippers are included. CON

C500 Vs

The C500 VS is a powered stand up wheelchair designed for use by adults with lower extremity, mobility, or severe physical disabilities or spinal cord injury. This powered chair has both motorized propulsion and motorized standing. The user can move from a seated to a standing position with power assistance, and can drive the unit and move about in either a seated or standing position. FRAME (LxW): 38 x 28.5 to 25.75 inches. Rigid frame with push handles and a power standing unit designed into t

Chair 4 Life

---- PROTOTYPE --------- PURPOSE: To create a prototype of a modular wheelchair that "grows" with the user allowing for independence over the lifespan. Through the United Kingdom's National Health Service, the Renfrew Group developed a new type of powered wheelchair with the Department of Health, as part of the Department's Innovation Health and Wealth program. Renfrew won a government contract to design a chair which maximizes the mobility and independence of children with disabilities as they

Challenger 2000 (Models 2000, 2000E, 2000N, 2000Ne, 2000W, & 2000We)

The Challenger 2000 is a powered folding wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 2000 model, this wheelchair comes in narrow (N) and wide (W) versions. FRAME (HxLxW): 38 x 44 to 47 x 24, 26 or 28 inches. With extended footrests, the length is 40 inches. The folded dimensions (LxW) are 34 x 14.5 inches. The folding chrome-plated frame includes rear anti-tippers. CONTROLS: Integrated progr

Challenger Bp 5000 (Models 5000, 5000E, 5000N, 5000Ne, 5000W, & 5000We)

The Challenger BP 5000 is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 5000, the Challenger BP comes in narrow (N) and wide (W) versions. FRAME (HxLxW): 36 to 38 x 39 or 41 x 24, 26, or 28 inches. The frame length without footrests is 27 inches. The turning radius with footrests is 30 inches. The rigid polyester- coated power base frame is available in midnight blue and candy apply

Challenger Bx 6000 (Models 6000, 6000E, 6000X, & 6000Xe)

The Challenger BX 6000 is a rigid heavy-duty powered wheelchair designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 6000 model, this wheelchair also comes with an extra-wide seat (noted with an "X" in the model number). FRAME (HxLxW): 37 to 39 x 42 x 26 inches. With elevating legrests, the length is 44 inches. The length without the footrests is 30 inches. The rigid one-piece polyester-coated power base

Challenger Dn (Models 1450, 1450E, 1450N, 1450Ne, 1450W, And 1450We)

The Challenger DN is a folding powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 1450, the Challenger DN comes in narrow (N) and wide (W) versions. FRAME (HxLxW): 36 x 41 or 43 x 23, 25 or 27 inches. This chair has a black folding powder-coated frame with anti-tippers. Folded dimensions (LxW) are 30 x 15 inches. CONTROLS: Integrated Integra joystick controller. RWD: Rear-wheel drive with

Challenger Dx (Models 1500, 1500E, 1500N, 1500Ne, 1500W, And 1500We)

The Challenger DX is a powered foldable wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard model 1500, the Challenger DX comes in narrow (N) and wide (W) versions. FRAME (HxLxW): 36 x 41 x 23, 25, or 27 inches. Folded (LxW) the chair is 30 x 15 inches. The turning radius with footrests is 32 inches. A folding chrome-plated frame is standard; also available is a black powder-coated frame with blue c

Challenger Fx (Models 1700, 1700E, 1700N, 1700Ne, 1700W, 1700We, 1710, & 1720)

The Challenger FX is a folding powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard model 1700, the Challenger FX comes in narrow (N) and wide (W) versions. FRAME (HxLxW): 36 to 38 x 38 x 24, 26, or 28 inches. With extended footrests, the length is 40 inches. Folded dimensions (LxW) are 31 x 15 inches. The turning radius with footrests is 18 inches. The standard frame is a folding chrome-plat

Challenger Pediatric 1000

The Challenger Pediatric 1000 is a child's powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 34 x 41 or 44.5 x 21.5 inches. Folding chrome-plated frame with anti-tipper. Folded dimensions (LxW) are 31 x 14 inches. CONTROLS: Integrated programmable controller. RWD: Rear wheel drive with a right angle gear motor. SEAT (LxW): 14 or 18 x 14 inches. The back height is 14.75 inches. Seat belt included. UPH

Challenger Pediatric 1200

The Challenger Pediatric 1200 is a powered wheelchair designed for use by children or small adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 34 to 36 x 36 or 37 x 21 inches. Folding powder-coated frame with anti-tipper, available in sunshine yellow or jade green. Folded dimensions (LxW) are 35 x 15 inches. CONTROLS: Integrated programmable Integra joystick controller. RWD: Rear wheel drive with a direct drive motor. SEAT (LxW): 14 or 18 x

Challenger Pp (Model 5500)

The Challenger PP, model 5500, is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 34 to 35 x 43 x 25 inches. The frame length without footrests is 31 inches. The turning radius with footrests is 19.5 inches. The one-piece polyester-coated power base frame is available in midnight blue and burgundy red; the seat frame is black. Front anti-tippers are included. CONTROLS: Integrated programmable Integ

Challenger Px (Model 6500)

The Challenger PX, model 6500, is a rigid heavy- duty powered wheelchair designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 40 to 46 x 46 x 26 inches. The length without the footplate is 34 inches. The turning radius with footrests is 20.25 inches. The rigid one-piece polyester-coated power base frame includes front anti-tippers and a power shock system. The seat frame is black and the base is available in midnight

Challenger Recliner 2040 (Models 2040E, 2040Ne, & 2040We)

The Challenger Recliner, model 2040, is a powered folding wheelchair with a manual reclining back designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 2040E model, this wheelchair comes in narrow (NE) and wide (WE) versions. FRAME (HxLxW): 42 (with seat back upright) x 34 x 24, 26, or 28 inches. With extended footrests, the length is 47 inches. The folded dimensions (LxW) are 34 x 15 inches. The folding chrome-

Challenger Recliner 2540 (Models 2540E & 2540Xe)

The Challenger Recliner. model 2540, is a heavy- duty powered folding wheelchair with a manual reclining back designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 2540E model, this wheelchair also comes in a wide (XE) version. FRAME (HxLxW): 42 (with seat back upright) x 36 x 30 or 32 inches. With extended footrests (standard), the length is 49 inches. The folded dimensions (LxW) are 36 x 15 inches. The f

Challenger Wide (Models 2500, 2500E, 2500X, 2500Xe, 2500Yw, 2500Ye)

The Challenger Wide, model 2500, is a folding heavy-duty powered wheelchair for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 2500 model, this wheelchair comes with an extra-wide seat (X) and a super extra-wide seat(Y). FRAME (HxLxW): 38 x 46 x 30, 32, or 34 inches. With elevating legrests, the length is 49 inches. The folded dimensions (LxW) are 30 x 15 inches. The folding chrome-plated frame includes rear ant

Cirrus Plus Folding Power Chair

The Cirrus Plus Folding Power Chair is a powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Folding lightweight carbon steel frame with silver vein finish and anti-tippers. CONTROLS: Programmable PG controller with adjustable-length joystick mount. SEAT: The seat is available in 16, 18, 20, or 22 inches. A Seat belt is included. The adjustable tension back is height and angle adjustable and can be folded down. The angle adjusts from 5 to 1

Comfort Standing Power Wheelchair (Models Ly-Esb22Sr, Ly-Esb22Dr, Ly-Esb22Ar, & Ly-Esb22Lr)

The Comfort Standing Power Wheelchair, models LY-ESB22SR, LY-ESB22DR, LY-ESB22AR and LY-ESB22LR, is a powered stand up wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME: Available in four sizes (HxLxW): 35 x 46.5 x 24.5 inches (small, LY-ESB22SR); 35.75 x 46.5 x 26 inches ((medium, LY-ESB22DR); 37.5 x 47.5 x 27.5 inches (large, LY-ESB22AR); or 39 x 47.5 x 29 inches ( extra large, LY-ESB22LR). The unit has a rigid steel framework

Dx Compact 900 (Maxiflex)

DX Compact 900, also called Maxiflex, is a powered wheelchair designed for indoor or outdoor use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 87 x 62 centimeters. The chair has a 117 centimeter turning radius. CONTROLS: P&G Dynamic electronic controls. FWD: Front wheel drive. SEAT (LxW): 40 to 51 x 49 centimeters. The backrest (HxW) is 51 to 64 x 50 centimeters. The comfort seat is padded with a full back. ARMRESTS: Height- and width-adjustable armrests. WHEE

Ec+ Extra Care Bariatric Transport Chair (Model 6850)

The EC+ Extra Care Bariatric Transport Chair, model 6850, is a powered transport chair and stretcher designed for use by individuals with obesity and mobility, neurological, or severe physical disabilities. It converts from a chair to a stretcher in order to facilitate transport and transfers. FRAME: In stretcher position, height is adjustable from 24.5 to 32.5 inches. Overall greatest width is 33.5 inches. There is a full width push handle. CONTROLS: Electric operation with pendant controls. SE

Etac Balder Finesse

Balder Finesse is a powered wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This front-wheel drive chair has a flexible chair-lift system and can be lowered into a complete horizontal position. FRAME (LxW): 35 inches (without footrest) x 26 inches (outside drivewheel). The length with the footrest extended is 45 inches. The height under the chassis is 3 inches. FWD: Front-wheel drive. SEAT (LxWxH): 19 x 17 x 15 to 33 inches. The sea

Etac Balder Junior

Balder Junior is a child's powered wheelchair designed for use by children with mobility disabilities or spinal cord injury. This chair elevates, declines, tilts to a 45-degree angle, and lays flat. FRAME (LxW): 35 x 25 inches (length with footrest folded back; width from outside of drive wheels). Ground clearance is 6.5 inches. The chair has an adjustable side support assembly and a swing-aside tray, and is available in nine different standard color schemes. CONTROLS: Choice of guidance system

Etac Balder Liberty

Balder Liberty is a powered wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 36 inches (without footrest) x 26 inches (outside drivewheel). The height under the chassis is 3 inches. SEAT (LxWxH): 19 x 17 x 16 to 33 inches. The seat can tilt forward 15 degrees or backward 45 degrees. ARMRESTS: Flip-up, depth regulated armrest with adjustable height and angle. WHEELS: 3-inch tires in front and 8-inch tires in rear. The axl

Flexmobil 600

Flexmobil 600 is a six-wheel powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 82 x 57 centimeters. A variety of modular accessories are available. The turning radius is 96 centimeters. CONTROLS: P&G Dynamic electronics. MWD: Mid-wheel drive. SEAT (LxW): 46 x 46 centimeters. The seat has an anatomical design. The backrest height is 30 centimeters. The chair includes an electric seat lift for getting in and out of the chair. UPHO

Gowrings 4 In 4 Power Chair

The Gowrings 4 in 4 Power Chair is a powered reclining and elevating wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This chair has powered rise, fall, and recline, with an extra low seat to fit under a steering wheel or a standard desk or table. FRAME (HxLxW): 115 (130 with headrest) x 102 x 61.3 centimeters. CONTROLS: Programmable joystick controls with five driving modes. RWD: Rear wheel drive. SEAT: Recaro seating system with powered rise and fall

Hd3 Corpus

The HD3 Corpus is a heavy duty powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 40.5 x 28 inches (base only). The minimum length for transport of the base is 36.25 inches. Minimum turning radius is 28 inches. The HD3 Corpus has a ground clearance of 3 inches and 4-wheel adjustable independent suspension. The base frame is available in black. Front anti-tippers, front lights and side and rear reflectors

Hoveround Mpv5

The Hoveround MPV5 is a powered wheelchair designed for use by individuals with lower extremity and mobility disabilities and spinal cord injury. Designed to have a very narrow turning radius and to be highly maneuverable in indoor and outdoor environments, this powered wheelchair has a unique Round for a Reason design with a round base and rear wheel steering that allows navigation around tight corners and through narrow spaces without damaging walls or furniture. FRAME: The circular base is 24

Image Mid Wheel Drive Wheelchair

The Image Mid Wheel Drive Wheelchair is a powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (HxLxW): 35.2 x 39 x 24.8 inches. The frame is available in silver, blue, or burgundy and comes standard with an adjustable independent suspension and front swivel semi-pneumatic anti-tippers. CONTROLS: Shark Dynamic remote programmable controller with diagnostic fault codes. The joystick can be right or left mounted. MWD: Mid wheel drive. SEAT: 19-

Invacare 3G Ranger X Rwd

The Invacare 3G Ranger X RWD is a reclining powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 28.5 to 31.5 x 25 inches. The frame is equipped with rear independent suspension and is available in a choice of 21 colors. A transport-ready option is available. CONTROLS: MKIV-A controller with switch options. RWD: Rear wheel drive. SEAT (LxW): 12 to 22 x 12 to 22 inches. The floor-to-seat height is adjustable to 17.5, 19.5 or 21 inches.

Invacare 3G Torque Wp Rwd Power Chair

The Invacare 3G Torque SP RWD is a power wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 28.5 to 31.5 x 12 to 24 inches. Minimum turning radius is 31.9 inches. CONTROLS: MKIV RII (standard) or MKIV-A with switch options. RWD: Rear wheel drive with a 4-pole motor is standard; a GB motor with TrueTrack is optional. SEAT (LxW): 12 to 20 x 12 to 20 inches. The floor-to-seat height is 17.5 to 21 inches. Seating options include tilt, recline,

Invacare Action P7E

The Invacare Action P7E is a powered wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding frame in a choice of electric red, electric blue, wet black or evergreen with navy. The chair folds to 13.75 inches wide including the joystick. Open, the chair is 23.25 to 25.25 inches wide x 41.75 to 43.75 inches long x 37 inches high. The turning radius is 34.5 inches. CONTROLS: Accessible on/off toggle switch and Mark IV sized- and styled-joystick with programmable thro

Invacare Excel Front Wheel Drive

The Invacare Excel Front Wheel Drive is a powered wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding frame folds to 14 inches wide including the joystick. Open, the chair is 26.25 inches wide x 32.5 to 39 inches long x 34 to 38.5 inches high. The full turning radius is less than 26 inches. Ground clearance is four inches. CONTROLS: Mark IV sized- and styled-joystick with programmable throw is permanently attached. This chair includes Action Virtual Service tha

Invacare Excel Front Wheel Drive With Captain Seat

The Invacare Excel Front Wheel Drive with Captain Seat is a powered wheelchair designed for use by individuals with mobility disabilities. FRAME:This chair disassembles and folds for transport. Open, the chair is 24.75 inches wide x 43.5 inches deep x 35 to 39 inches high. The full turning radius is less than 25 inches. Ground clearance is four inches. The shroud is available in liquid black, candy apple red, ocean blue, or emerald green. CONTROLS: Mark IV sized- and styled-joystick with progr

Invacare Power 9000

The Invacare Power 9000 is a powered wheelchair designed for use by adults with mobility disabilities. FRAME: Folding steel frame with aluminum cross braces in standard adult or low seat configurations. With the joystick, this chair is 21.75 to 27.75 inches wide when open in the adult model and 23.75 to 27.75 inches wide when open in the low seat model. With the joystick, both models are 14.5 inches wide folded. The adult model is 35.25 to 39.25 inches high and the low seat model is 33.25 to 37.

Invacare Power Tiger With Orbit Seat

The Invacare Power Tiger with Orbit Seat is a child's powered wheelchair designed for use by children with mobility disabilities. FRAME:Available in a variety of colors, the frame disassembles for transport. The chair is 38 inches high and 22.25 inches wide (without the joystick). CONTROLS: Mark IV RX programmable controller with joystick. This controller has the capability for non-proportional driving for sip-and-puff and chin- or head-switch operation/digital driver inputs. Electronic communi

Invacare Pronto M50 With Surestep Power Chair

The Invacare Pronto M50 with SureStep is a compact powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 34 x 24 inches with the foot board up, or 38 x 40 inches with the footboard down. This chair has a turning radius of 19.5 inches and a ground clearance of 2.6 inches. The shroud is available in deep blue pearl or candy red pearl. CONTROLS: Easy Remote programmer. MWD: The mid wheel drive allows for driving over thresholds and transi

Invacare Pronto M94 Bariatric Power Chair

The Invacare Pronto M94 Bariatric Power Chair is a heavy-duty power wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 36 x 28 inches. The turning radius is 19.5 inches. The shroud is available in red, blue, or black. CONTROLS: An MKV NX80 controller is standard. An upgrade to an MKV EX controller is optional. MWD: The mid- wheel drive allows for driving over thresholds and transitions up to 2 inches high. SEAT (LxW): 16 x 18 inches. The flo

Invacare Tdx Sp Rehab Seat Power Wheelchair

The Invacare TDX SP Rehab Seat Power Wheelchair is a compact powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 35.25 x 24 inches without front riggings. It has a turning radius of 22 inches and a ground clearance of 3 inches. CONTROLS: MK690/SPJ+. MWD: This wheel chair utilizes True Center Wheel drive and Enhanced SureStep allowing the user to drive over thresholds of up to 3 inches. SEAT L x W: 12 to 22 x 12 to 24 inches. The floor

Invacare Torque Sp

The Invacare Torque SP is a powered wheelchair designed for use by adults with mobility disabilities. FRAME (WxL): 24.75 x 32.25 inches. The chair is 34.25 inches high in the low configuration and 36.5 inches high in the medium configuration. The ground clearance is nearly five inches and the turning radius is 29.5 inches or less. Dynamic anti-tippers are included. CONTROLS: Mark IV RII joystick is included on the standard model and the Mark IV A joytick is standard with the weight limit upgr

J6 (Models 2S-C, 2S-Ss & 2Sp-Ss)

The J6, models 2S-C, 2S-SS and 2SP-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 34.5 x 23.25 inches with a 2.25-inch ground clearance and a 21.25-inch turning radius. This wheelchair has Active-Trac (ATX) suspension and a non-folding frame. The chair is available in red and blue. CONTROLS: 75 amp Q-Logic NE joystick controller is standards; other controllers are available. MWD:

Jazzy 1113 Ats (Models 2Sp-C & 2Sp-Ss)

The Jazzy 1113 ATS, models 2SP-C and 2SP-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 36 x 23 inches with a 2.5-inch ground clearance and a 20.5-inch turning radius. This wheelchair has Active-Trac suspension, a low center of gravity and a non-folding frame. It has 6-inch front anti-tips. The chair is available in viper blue, onyx black, champagne and candy apple red. CONTROLS: 5

Jazzy 1170 Xl Plus (Models 2Vhd-Ss, 2Vhd-C, 3Vhd-Ss & 3Vhd-C)

The Jazzy 1170 XL Plus, models 2VHD-SS, 2VHD-C, 3VHD-SS and 3VHD-C, is a bariatric powered wheelchair designed for indoor and outdoor use by large adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 46.25 x 30 inches with a 4-inch ground clearance and a 26.75-inch turning radius. This wheelchair comes standard with Active-Trac suspension for enhanced outdoor performance. It has a non-folding frame with 8-inch front anti-tip wheels controlled by independent dy

Jazzy 1420 (Models 2Hd-Ss, 2Hd-C, 2Vhd-Ss, 2Vhd-C, 3Vhd-Ss & 3Vhd-C)

The Jazzy 1420, models 2HD-SS, 2HD-C, 2VHD-SS, 2VHD-C, 3VHD-SS and 3VHD-C, is a bariatric powered wheelchair designed for indoor and outdoor use by large adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 46 x 27.25 inches with a 4.5-inch ground clearance and a 25.75-inch turning radius. This wheelchair comes standard with Active-Trac suspension for enhanced outdoor performance. It has a non-folding frame with 8-inch front anti-tip wheels controlled by indep

Jazzy 1650 (Models 3Ehd-Ss & 3Ehd-C)

The Jazzy 1650, models 3EHD-SS and 3EHD-C, is a bariatric powered wheelchair designed for indoor and outdoor use by large adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 47 x 30.375 inches with a 4.25-inch ground clearance and a 26.75-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame with 8-inch front anti-tip wheels controlled by independent dynamic spring-struts. The chair comes in champagne, gray, candy apple red,

Jazzy 600 (Models 2S-C, 2S-Ss, 3S-C, 3S-Ss, 3Sp-Ss & 3Sp-C)

The Jazzy 600, models 2S-C, 2S-SS, 3S-C, 3S-SS, 3SP-SS and 3SP-C, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 36.5 x 23.5 inches with a 3-inch ground clearance and a 20.5-inch turning radius. This wheelchair has Active-Trac (ATX) suspension and a non-folding frame. The chair is available in champagne, candy apple red, viper blue, black onyx, kelly green, pewter, emerald green, sapp

Jazzy 614 (Models 2S-C & 2S-Ss)

The Jazzy 614, models 2S-C and 2S-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 35.5 x 25.125 inches (without riggings) with a 2.25-inch ground clearance and a 20-inch turning radius. This wheelchair has Active-Trac (ATX) suspension and a non-folding frame. The chair is available in red and blue. CONTROLS: 50 amp joystick controller. MWD: Two-motor, Mid-Wheel 6 drive. SEAT (WxD):

Jazzy 614Hd (Models 2Hd-C & 2Hd-Ss)

The Jazzy 614HD, models 2HD-C and 2HD-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 35.5 x 25.125 inches (without riggings) with a 2.25-inch ground clearance and a 20-inch turning radius. This wheelchair has Active-Trac (ATX) suspension and a non-folding frame. The chair is available in red and blue. CONTROLS: 50 amp joystick controller. MWD: Two-motor, Mid-Wheel 6 drive. SEAT (Wx

Jazzy Elite 6 (Models 2S-C & 2S-Ss)

The Jazzy Elite 6, models 2S-C and 2S-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 36.5 x 23.25 inches with a 2-inch ground clearance and a 23.25-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame that is available in red and blue and has Jazzy Armor with shroud and controller guards. CONTROLS: 40 amp PG GC 3 controller. FWD: Two-motor, in-li

Jazzy Freedom

The Jazzy Freedom is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 36.5 x 23.25 inches with a 2-inch ground clearance and a 25-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame that is available in red and blue and has Jazzy Armor with shroud and controller guards. CONTROLS: 40 amp PG GC 3 controller. FWD: Two-motor, in-line, front-wheel drive. SEAT

Jazzy Select 14 (Models 14-C & 14-Ss)

The Jazzy Select 14, models 14-C and 14-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 38 x 24.75 inches (without front riggings) with a 3-inch ground clearance and a 21-inch turning radius. This wheelchair has limited suspension and a non-folding frame. The chair is available in blue and red. CONTROLS: 60 amp joystick controller. MWD: Two-motor, mid-wheel drive. SEAT (WxD): The st

Jazzy Select 6

The Jazzy Select 6 is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 35.625 x 23.5 inches with a 2-inch ground clearance (at anti-tips) and a 20.5-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame with Active-Trac suspension and an articulating rear caster beam. The chair is available in red and blue. CONTROLS: 40 amp PG GC 2 controller. MWD: Two-moto

Jazzy Select Elite

The Jazzy Select Elite is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 34.375 x 22.75 inches with a 1.5-inch ground clearance (at anti-tips) and a 24.75-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame with 3-inch front anti-tip wheels controlled by independent dynamic spring-struts. The chair is available in red and blue and has Jazzy Armor with s

Jazzy Select Hd (Models Hd-Ss & Hd-C)

The Jazzy Select HD, models HD-SS and HD-C, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 37.75 x 25 inches with a 2.5-inch ground clearance (at anti-tips) and a 27-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame with 6-inch front anti-tip wheels controlled by independent dynamic spring-struts. The chair is available in red and blue and has Jazz

Jimmie (Model Ul8Wpbs)

The Jimmie, model UL8WPBS, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 32 x 22.5 x 36.5 inches. The ground clearance is 2 inches, and the turning radius is 15.5 inches. It has rear anti-tips. This portable chair can be dismantled into three parts for transport. The base is available in burgundy red. CONTROLS: Left- or right

Micro Buggy

PROTOTYPE--- The Micro Buggy is an off-road wheelchair designed for use by individuals with lower extremity or mobility disabilities. This gas powered wheelchair can be used for recreation or for tasks such as walking the dog. FRAME: Adjustable suspension; automatic transmission; 3 forward gears and 1 reverse gear; 1.5 inch receiver hitch in front and rear; 8 inch suspension travel; expandable storage system that slip links storage baskets. CONTROLS: The unit is all hand controlled, with a thumb

Miniflex 500

The Miniflex 500 is a compact powered wheelchair designed for indoor use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 82 x 57 centimeters. The turning radius is 120 centimeters. CONTROLS: P&G/ Dynamics. FWD: Front wheel drive. SEAT (LxW): The anatomically-shaped seat is 46 x 46 centimeters. The backrest height is 30 centimeters, and a variety of optional headrests is available. ARMRESTS: Height- and width- adjustable armrests. WHEELS: Back wheels are joint fi

Miniflex Comfort

The Miniflex Comfort is a powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This chair has a 120 centimeter turning radius. FRAME (LxW): 82 x 57 centimeters. CONTROLS: P&G/Dynamics electronic controls. FWD: Front wheel drive. SEAT (LxW): 40 to 51 x 49 centimeters. The backrest (HxW) is 51 to 64 x 50 centimeters. An electric seat lift is standard. ARMRESTS: Height- and width-adjustable armrests. WHEELS: Back wheels are joint fixed in the chas

Nutron R5I Power Wheelchair

The Nutron R5I Power Wheelchair is a powered wheelchair designed for use by individuals with severe physical disabilities. FRAME: Wet black oversized, high-strength tubular frame reinforced crossbrace frame folds to 13 inches for transport. . CONTROLS: Fully programmable MKIV -RII electronics. RWD: Rear-wheel drive. SEAT: Seat to floor height as low as 17.75 inches. Seat widths range from 14 to 20 inches and the depths range from 16 to 18 inches. The back height ranges from 16 to 19 inches. The

Nutron R5Ilx Power Wheelchair

The Nutron R5ILX Power Wheelchair is a powered wheelchair designed for use by individuals with severe physical disabilities. FRAME: Oversized, high-strength tubular frame with a reinforced crossbrace design that folds to 13 inches for transport. The chair is available in five colors. CONTROLS: Fully programmable MKIV -RII electronics. RWD: Rear-wheel drive. SEAT: Seat to floor height as low as 17.75 inches. Seat widths range from 14 inches to 20 inches and seat depths range from 16 inches to 18

Nutron R5Ilxp Power Wheelchair

The Nutron R5ILXP Power Wheelchair is a powered wheelcdhair designed for use by individuals with severe physical disabilities. FRAME: Oversize, high-strength tubular frame with reinforced crossbrace design that folds to 13 inches for transport. The nchair is available in five colors. CONTROLS: Fully programmable MKIV -RII electronics. RWD: Rear-wheel drive. SEAT: Seat to floor height as low as 17.75 inches. The seat width ranges from 14 to 20 inches and the depths range from 16 to 18 inches. T

Oasis (Kameleon) Wheelchair

The Oasis, also called Kameleon, is a powered wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 14 1/8 x 29.5 to 33.5 x 24 inches. The modular frame is made of extruded aluminum, and has a turning radius of 23 inches and ground clearance of 4 inches. The chair features center of gravity adjustment, a rear shroud, and tail lights. CONTROLS: Joystick box with lateral adjustment. SEAT: Elastic rigid seat wit

Optimus

Optimus is a powered wheelchair designed for use by individuals with mobility disabilities and spinal cord injury. FRAME: Total length, 123 centimeters (105 centimeters without leg support). CONTROLS: The electronic control panel has a liquid crystal display (LCD) and LED (light emitting diode) signals. Its angle can be set independently of the height-adjustable armrest, and it can be swung to the side and back so the arm can fit beneath a table edge. SEAT (LxW): 45 to 49 x 43 centimeters. The

P.a.w.s. Wheelchair

The P.A.W.S. Wheelchair is a prototype all-terrain powered wheelchair designed for indoor or outdoor use by individuals with mobility disabilities. This six-wheel drive wheelchair has parallel all wheel steering (PAWS), which allows it to travel on sand or rough trails and up steep grades, and also to navigate tight office space and public facilities. The seat and all of the wheels share a common linkage that allows them to rotate relative to the frame while remaining parallel to one another. FR

Pacesaver Scout

The PaceSaver Scout is a rigid heavy-duty powered wheelchair designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 39 to 41 x 39 x 25 inches. The overall height is 31 to 33 inches with the seat back folded down. The turning radius is 21.5 inches. The ground clearance is 3 inches. The chair disassembles for transport. The Scout includes front anti-tippers and features independent coil spring suspension. The seat frame

Pacesaver Scout Boss 4.5 Cc / Ss

The PaceSaver Scout BOSS 4.5 CC/SS is a rigid heavy-duty powered wheelchair designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 36 to 39 x 44 x 25.5 inches. The turning radius is 24.4 inches, and the maximum curb height climbed is 2.5 inches. The ground clearance is 3 inches. The chair disassembles for transport. This chair features a heavy-duty steel frame with independent coil-spring suspension and includes height-

Pacesaver Scout M Series (Models M1 & M1-350)

The PaceSaver Scout M series is a rigid heavy-duty powered wheelchair designed for indoor and outdoor use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. Both models convert from a front-wheel drive (FWD) to a rear-wheel drive (RWD)wheelchair by selecting a switch. FRAME (HxLxW): In font wheel drive, the chair 38 to 40 (model M1) or 38.75 to 40.75 (model M1-350) x 38.75 with FWD or 38.25 with RWD x 24 inches. The height with the seat back down

Pacesaver Scout Rf-P3 & Rf-P4

The PaceSaver Scout RF-P3 and RF-P4 are rigid heavy-duty powered wheelchairs designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 36 to 39 with Admiral's seat back folded down x 40.5 x 25 inches. 24.5 to 27.5 with the Com-For-Back seat folded down x 40.5 x 25 inches. The turning radius is 21.5 inches. The ground clearance is 3 inches. The chair disassembles for transport. The Scout RF-P3 and RF–P4 include front anti-t

Paragolfer

The ParaGolfer is a powered standup wheelchair designed to enable people with mobility and lower extremity disabilities and spinal cord injury to play golf. This all-terrain powered chair features both motorized propulsion and motorized standing. The user can move from a seated to a standing position with power assistance, and can drive the unit and move about while either in a seated or standing position. The ParaGolfer also can be used for other sports that require standing (such as archery or

Power Picco

The Power Picco is a child's powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The brightly-colored frame folds to 36 centimeters after batteries are removed, and includes a support roll. CONTROLS: Programmable single-knob electronic controls. RWD: Electric power drive. UPHOLSTERY: Black. ARMRESTS: Padded armrests. BRAKES: Pressure brake for regular use, and drum brake for downhill use. CASTERS: Two front ca

Power Tommy

The Power Tommy is a child's powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The brightly-colored tubular frame is foldable after removal of batteries. The side panel is removable. CONTROLS: Left or right joystick controls. RWD: Rear wheel drive. ARMRESTS: Height-adjustable and removable arm support. WHEELS: Optional wheel cover. WARRANTY: four-year limited warranty for frame, 2 years for electronics and c

Pronto M51 Power Wheelchair

The Invacare Pronto M51 Power Wheelchair is designed for use by individuals with lower extremity, mobility, or severe physical disabilities or spinal cord injury. FRAME (HxLxW): 35 to 37 x 34 to 40 x 24 inches. Power base with six wheels for stability and a tight overall turning radius of 21.5 inches for accessability. The chair comes in a choice of candy red or deep blue shroud colors.CONTROLS: Fully programable MKIV-RII electronics for precise driver control with an adjustable joystick mount.

Pronto M71 Power Wheelchair

The Invacare Pronto M51 Power Wheelchair is a powered wheelchair designed for use by individuals with lower extremity, mobility, or severe physical disabilities or spinal cord injury. FRAME: Disassembles without tools for transport. The chair is available in a choice of candy red, deep blue, or magic black shroud colors. CONTROLS: Fully programable MKIV-RII electronics with an adjustable joystick mount. CWD: The center-wheel drive positions the drive wheels directly beneath the individual's cent

Pronto M9I Power Wheelchair

The Invacare Pronto M9I Power Wheelchair is a powered wheelchair designed for use by individuals with lower extremity, mobility, or severe physical disabilities or spinal cord injury. FRAME: Six-wheel power base with a tight overall turning radius of 21.5 inches for accessability. CONTROLS: Fully programable MKIV-RII electronics for precise driver control. CWD: Center wheel drive. The center-wheel drive positions the drive wheels directly beneath the individual's center-of-gravity. SEAT: The v

Quantum Dynamo

Quantum Dynamo is a child's powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 32 x 23 inches. The frame includes limited suspension with 2-inch ground clearance. Available frame colors are T-Rex red, Bronto blue, Gator green, saber yellow, prehistoric pink, or primitive purple. CONTROLS: Programmable electronic controls. MWD: Two-motor mid-wheel drive. SEAT (LxW): Synergy Seat seating system in sizes a

Quantum Dynamo Ats

Quantum Dynamo ATS is a child's powered all-terrain wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 36.5 x 23 inches. This chair includes Active-Trac suspension with 2.5-inch ground clearance. Availab| Available frame colors are T-Rex red, Bronto blue, Gator green, saber yellow, prehistoric pink, or primitive purple. CONTROLS: Programmable electronic controls. MWD: Two-motor mid-wheel drive. SEAT (LxW): Syn

Quickie P-220

The Quickie P-220 is a powered wheelchair designed for individuals with severe physical disabilities, spinal cord injuries, and mobility disabilities. FRAME: Overall width 24.75 inches and 27.75 inches. The frames are available in a variety of colors. CONTROLS: Integral joystick controller provides digital speed and tilt-control. Breath control, chin control, penta switch, and proportional head control are available. Available single switch controls include the Buddy Button (see separate entry),

Quickie P-222 Se

The Quickie P-222 SE is a powered sports wheelchair designed for use by active individuals with severe physical disabilities, spinal cord injury, and mobility disabilities. An optional manual conversion kit enables the user to covert the chair from power drive to a self propulsion system. FRAME: Features a center of gravity tilt option. Available in eighteen color choices. CONTROLS: Joystick is standard. Breath control, chin control, penta switch, head control, star board, and wafer board are a

Quickie P100 And Quickie P110

The Quickie P100 and Quickie P110 are powered adult wheelchairs. FRAME: The P100 features a rigid, non-folding frame and the P110 has a folding frame. Frames are available in a choice of 14-, 16, and 18-inch widths. The P100 is also available in a 20-inch frame at extra cost. Both models come in a standard choice of blue, black, or red finishes; 11 optional colors are also available. CONTROLS: Integral joystick control with a choice of right or left mounting. A heavy-duty remote and swing-away r

Quickie P190

The Quickie P190 is a powered wheelchair designed for adult users. FRAME: The rigid frame is available in a choice of 11 standard colors and 3 optional colors.The standard frame is available in a choice of 16 or 20 inches wide; a 20-inch frame is available at an extra charge. Anti-tip tubes are standard. CONTROLS: A remote joystick with programmable controller and a choice of right or left mounting is standard. A heavy-duty remote and swing-away retractable mounts are optional. Specialty control

Quickie P200

The Quickie P200 is a powered wheelchair designed for adult users. FRAME: The standard frame is available in 16- and 18-inch widths. 14-, 15-, 17-, 19-, and 20-inch frames are available at an extra charge. A long frame is also available. The frame is available in a choice of 11 standard colors and 6 optional colors. Anti-tip tubes are standard. CONTROLS: A remote joystick with a choice of right or left mounting is standard. A heavy-duty remote and swing-away retractable mounts are optional. Spec

Quickie P300

The Quickie P300 is a powered wheelchair designed for adult users. FRAME: The overall frame width ranges from 24 5/8 inches to 28.25 inches depending upon the seat width and caster size. The regular frame is 33 inches long and the long frame is 35 inches long without footrests. The frame is constructed of tri-cell reinforced rectangular tubing and is available in a choice of 11 standard colors and 3 optional colors. The frame constructions allows components and accessories to be bolted directl

Quickie P320

The Quickie P320 is an adult powered wheelchair which can be converted to a manual chair as needed using an optional conversion kit. FRAME: The frame is 24 inches wide with the standard base and 26 inches wide with the wide base and 33.5 inches long without the footrests. Anti-tip tubes are standard The frame is available in a choice of 11 standard colors and 6 optional colors. CONTROLS: A remote programmable joystick and controller with a choice of right or left mounting is standard. A heavy-

Quickie Rhythm M5 Power Chair

The Quickie Rhythm M5 is a power wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 37 x 25.32 inches. This chair has a turning radius of 20 inches. The cowl is available in blue, burgundy or black. The chair is available with optional power tilt, power lift, or power recline. CONTROLS: Delphi remote 4- or 5-button hand control. MWD: M3 mid wheel drive. SEAT (LxW): 14 to 22 x 14 to 24 inches (traditional rehab seat) or 12 to 22 x 17 to 20 in

Ranger Ii - Rm900 Series

The Ranger II - RM900 Series is an adult powered wheelchair for everyday use. RWD: "Free-n-Easy" clutch system. CONTROLS: MCC RIIA Electronics with inductive joystick, 10 function performance menu, full self diagnostics capability, speed selector knob, optional easy remote programmer, an on-demand braking system for braking downhill, a circuit breaker, and automatic correction circuits to evenly maintain speed. SEAT: Seats width 14, 16, 18 & 20 inch widths. Seat depth 16 inches. Seat height

Rocket

The Rocket is a powered wheelchair designed for use by individuals with mobility disabilities. FRAME: Non-folding automotive-style steel unibody construction with optional tie-downs for transport. The chair is 24.75 inches wide. The chasis is available in ocean spray speckle, flaming rocket red, four seasons green, or black. CONTROLS: Fully programmable touch button controls with joystick-style steering. The controls can be right- or left-mounted and switched as needed. The controls can be exten

Scalevo

Scalevo is an electric stair-climbing wheelchair designed for individuals who use wheelchairs. It moves across flat ground by balancing on its two rear wheels. When the user approaches a set of stairs, two rubber tracks mounted on the bottom of the chair extend down, the chair leans back to keep the user level, and then Scalevo traverses the stairs one step at a time using its retractable rubber tracks. Scalevo has no front wheels, making it a two-wheeler platform. It can also ascend and descend

Seeker Ii

Seeker II is a powered all-terrain wheelchair designed for use by children or adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. This all-terrain wheelchair is designed for indoor or outdoor use on sand, grass, mud, snow, or rocky conditions. FRAME (HxW): 36 x 31.5 inches with a 16-inch seat; folded the wheelchair is 21 inches wide. The plastic folding frame has molded ABS plastic plates and hinges and left and right side panels. The chair also has a remov

Shoprider Featherlite (Model Te-Fs888)

The Shoprider FeatherLite, model TE-FS888, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 35 x 22 x 34 inches. The turning radius is 32.5 inches and there are rear anti-tips. This foldable chair is available in burgundy. CONTROLS: Adjustable length VSI joystick controller. RWD: Two 0.45-horsepower motors rear-wheel drive. SEAT

Shoprider Fpc Power Chair (Models Phfw-1118 & Phfw-1120)

The Shoprider FPC Power Chair, models PHFW-1118 and PHFW-1120, is a folding powered wheelchair designed for used by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 46 x 25 x 37 inches (model PHFW-1118) and 46 x 27 x 37 inches (PHFW-1120). For both models, the ground clearance is 3 inches, and the turning radius is 24 inches. The frame is made of steel, and available in b

Shoprider Hd (Model 888Whd)

The Shoprider HD, model 888WHD, is a bariatric powered wheelchair designed for indoor and outdoor use by large adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxWxH): The overall dimensions, including the footplate, are 47 x 29 x 50 inches. The ground clearance is 3 inches. The turning radius is 37.5 inches. The base is available in burgundy. CONTROLS: Programmable VR-2 Remote Joystick Controller with VR-2 Main Control Box featuring adjustable speed and battery

Shoprider Smartie (Model Ul8W)

The Shoprider Smartie, model UL8W, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 36 x 23 x 37 inches. The ground clearance is 2 inches, and the turning radius is 15.5 inches. Rear anti-tips are included. This portable chair can be dismantled into three parts for transport. The base is available in red and blue. CONTROLS: VSI

Sighted Wheelchair

---- PROTOTYPE --------- PURPOSE: To create a prototype of a robotic wheelchair that uses three dimensional (3D) imaging to allow individuals who are blind or have low vision and use a wheelchair to "see" when navigating in the indoor and outdoor environment. Researchers at the Luleå University of Technology (LTU) in Sweden have developed a wheelchair that uses a laser sensor to generate a 3D map of its surroundings, which is then transferred to an on-board haptic robot, allowing the robot to na

Solar Powered Wheelchair

---- PROTOTYPE --------- PURPOSE: To create a prototype of a solar powered wheelchair with retractable panels for individuals with lower extremity or mobility disabilities, spinal cord injury, or cerebral palsy. A team of students and faculty from the University of Virginia School of Engineering created a prototype design of a solar powered wheelchair with retractable panels inspired by the idea from a man with cerebral palsy from Turkey. The Solar Powered Team (SPT) created the prototype using

Solo 6600

The Solo 6600 is an adult folding, powered wheelchair. The overall measurement of the the wheelchair is 25.25 w x 37 h x 31.5 l inches. A detachable, sealed joystick is the standard controller. Lifetime sealed and lubricated drives are also standard. The seat and back measurements are: seat - 18 w, between armposts at seat level - 16.25, seat from floor - 20, top of armrest from seat - 10, back from seat - 15.25, depth of seat - 16, inches. The seat and back are vinyl upholstered with textilene

Sphere Chair

---- PROTOTYPE --------- PURPOSE: To design a prototype of a powered wheelchair that allows users with mobility disabilities to move, crouch, stand, or lay down all while seated and without leaving the chair. The Sphere Chair is a powered wheelchair that looks like a chair sitting on top of a ball (i.e. sphere) with two casters extending from the rear of the frame. The Sphere’s unique design allows for greater freedom of motion. Secured in the ergonomic seat, the user can switch between positi

Sprint Gt

Sprint GT is a reclining powered wheelchair designed for use by individuals with mobility or severe physical disabilities and spinal cord injury. FRAME (HxLxW): The steel frame is 102 x 85 x 65 to 67 centimeters. When the leg support is extended, the wheelchair length is 113 centimeters. SEAT (HxL): 54 x 39 to 50 centimeters. The back height is 45 centimeters. ARMRESTS: The arm support height is 20 to 25 centimeters. BRAKES: Included. WHEELS: Large volume pneumatic tires. FOOTRESTS: Includes l

Storm Series Tdx3

The Storm Series TDX 3 is a powered wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 34 to 41 (depending on seating system) x 35.25 x 25 (26.5 with joystick) inches. Includes Stability Lock and SureStep suspension configured for obstacles up to 3 inches high. Finish options include Basic Colors (Deep Purple, Cobalt Blue, Anthracite, Wet Black, Red, Silver Vein, Lavender, Wet Black with Twilight Sparkle,

Storm Series Tdx4

The Storm Series TDX 4 is a powered wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 33.25 to 41 (depending on seating system) x 35.25 x 25.5 inches (28.5 inches with 20-inch joystick). The frame includes Stability Lock and SureStep suspension configured for obstacles up to 3 inches high. Finish options include basic colors (deep purple, cobalt blue, anthracite, wet black, red, silver vein, lavender, wet

Storm Series Tdx5

The Storm Series TDX 5 is a powered wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 33.25 to 41inches (depending on seating system) x 35.25 x 25 inches (26.5 with joystick). This chair includes Stability Lock and SureStep suspension configured for obstacles up to 3 inches high. Finish options include basic colors (deep purple, cobalt blue, anthracite, wet black, red, silver vein, lavender, wet black wit

Streamer Compact Power Chair (Model 888Wb)

The Streamer Compact Power Chair, model 888WB, is powered wheelchair designed for use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 35 3/8 x 22.5 x 27 to 37 3/8 inches. The wheelbase is 14.5 x 20 inches with a ground clearance of 2.75 inches. The turning radius is 26.5 inches with the footplate. Three-inch ant-tip wheels are standard. The chair disassembles for transport. The chai

Streamer Mid-Wheel Power Chair (Model 888Wnlb)

The Streamer Mid-Wheel Power Chair, model 888WNLB, is powered wheelchair designed for use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 35 3/8 x 22.5 x 27 to 37 3/8 inches. The wheelbase is 14.5 x 20 inches with a ground clearance of 2.75 inches. The turning radius is 26.5 inches with the footplate. The chair disassembles for transport. The chair is available in blue, forest gree

Streamer Mid-Wheel Power Chair With Curb Skipper (Model 888Wnlb-Cs)

The Streamer Mid-Wheel Power Chair with Curb Skipper, model 888WNLB-CS, is powered wheelchair designed for use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The Curb Skipper feature enables the chair to handle curbs up to four inches high. FRAME (LxWxH): The overall dimensions, including the footplate, are 35 3/8 x 22.5 x 27 to 37 3/8 inches. The wheelbase is 14.5 x 20 inches with a ground clearance of 2.75 inches. The turning radius is 26.5 inche

Streamer Sport (Model 888Wa)

The Streamer Sport, model 888WA, is powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxW): The overall dimensions, including the footplate, are 45 x 24 x 40 inches. The wheelbase is 41 x 23 inches with a ground clearance of 3 inches. The turning radius is 17.7 inches. Two rear 3-inch anti-tip wheels are standard. The chair disassembles for transport. The base is available in blue or burgundy.

Streamer Sport Power Chair With Curb Skipper (Model 888Wab-Cs)

The Streamer Sport Power Chair with Curb Skipper, model 888WAB-CS, is powered wheelchair designed for use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The Curb Skipper feature enables the chair to handle curbs up to four inches high. FRAME (LxWxH): The overall dimensions, including the footplate, are 38 x 22.5 x 27.5 to 40 inches. The wheelbase is 23.5 x 23 inches with a ground clearance of 3 inches. The turning radius is 27 inches with the footpl

Streamer Sport Rehab (Model 888Wa)

The Streamer Sport Rehab, model 888WA, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 37 x 24 x 32 inches. The ground clearance is 3 inches, the turning radius is 17.7 inches. The base is available in red and blue. CONTROLS: Self-diagnosing PG Drives VSI Joystick Controller. RWD: Two 0.60-horsepower motors rear-wheel drive. SE

Street Corpus

The Street Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 42.25 x 24.75 inches; 32.5 x 24.75 inches (base only). The minimum dimensions for transport (HxLxW) are 31.5 x 32.5 x 24.75 inches. Minimum turning radius is 48 inches. The HD3 Corpus has a ground clearance of 2.4 inches and 4-wheel adjustable independent suspension. The base frame is available in black/gold, copper metallic and blu

Sunfire Plus Power Rear Wheel Drive Wheelchair Base

The Sunfire Plus Power Rear Wheel Drive Wheelchair Base is a powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 39 x 24 inches. Available in blue, red, or gold, the chair is equipped with 2-inch solid rear-mounted anti-tip wheels. CONTROLS: Programmable PG controller with adjustable joystick mount. RWD: Two-motor rear wheel drive. SEAT: Swivel and reclining captain's seat with adjustable headrest and seat belt. ARMRESTS: Flip-back pa

Tandem Electric Wheelchair

---- PROTOTYPE --------- PURPOSE: To design a prototype of a simple, fun, and sporty aesthetic electric vehicle for individuals with lower extremity or mobility disabilities, people with spinal cord injury and others who use a wheelchair. After spending an extended period of time in a wheelchair to better understand the challenges of wheelchair users and individuals with disabilities, designer Alexandre Pain, proposed that it was the stigma associated with the wheelchair that appeared to be one

Teknique Fwd

The Teknique FWD is a powered wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): This power base chair is 41.9 x 25 inches. It has a turning radius of 24 inches and a ground clearance of 3.6 inches. Front anti-tip wheels are included. A cup holder and side tote bag are included. The base is available in black, red, teal, purple, yellow, blue or white. CONTROLS: Programmable microprocessor controller. The armrest-mounted j

Teknique Gt

The Teknique GT is a powered wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): This power base chair is 42.5 x 25.3 inches. It has a turning radius of 37 inches, a ground clearance of 4.7 inches, and a 3-inch maximum step climb for small bumps or floor raises. The base is available in black, red, teal, purple, yellow, blue or white. A cup holder and side tote bag are included. CONTROLS: Programmable microprocessor control

Teknique Rwd

The Teknique RWD is a powered wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): This power base chair is 42 x 25 inches. It has a turning radius of 36 inches, a ground clearance of 2.5 inches, and a 2-inch maximum step climb for small bumps or floor raises. The base is available in black, red, teal, purple, yellow, blue or white. A cup holder and side tote bag are included. CONTROLS: Programmable microprocessor controller

Teknique Xhd

The Teknique XHD is a heavy-duty powered wheelchair designed for use by large individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): This power base chair is 47 x 27.5 inches. It has a turning radius of 28 inches, a ground clearance of 3.7 inches, and a 3-inch maximum step climb for small bumps or floor raises. Front anti-tip wheels, a cup holder and a side tote bag are included. The base is available in black, red, teal, purple, yellow, blue or white. CONT

TopChair S

The TopChair S is a electronic seat intended to help people in wheelchairs or with mobility disabilities to move independently. Is designed in three different models.

Tracabout Individual Recreational Vehicle 2000 (Irv 2000)

The TRACABOUT Individual Recreational Vehicle 2000 (IRV 2000) is a powered wheelchair designed for indoor and outdoor use by individuals with mobility disabilities. This chair crosses soft surfaces, plowed earth, snow, mud, ruts, sticks, and other obstacles less than four inches high and also maneuvers within the home. FRAME (LxW): 38 x 28 inches and fits through most standard doorways. The chair turns in its own length with a zero turning radius. CONTROLS: Joystick controller mounted on the arm

Whill Type-A Motorized Wheelchair

The WHILL Type-A Motorized Wheelchair is different from conventional wheelchair designs, mainly because the user sits in an active rather than an inactive position. The wheelchair can be leaned into, like a Segway or a bike, with a controller that can be manipulated with a single hand. The wheelchair also has a small turning radius and can easily be turned on a dime. Additionally, it can easily handle riding on difficult terrain like grass, gravel, snow and dirt. The chair has three different mo

X850 Corpus

The X850 Corpus is a heavy duty powered wheelchair designed for outdoor, off-road use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 49-57 x 28 inches. Minimum turning radius is 28 inches. The HD3 Corpus has a ground clearance of 3.25 inches and 4-wheel adjustable independent suspension. The base frame is available in black onyx, crystal blue and vintage wine. Front halogen lights and rear lights are included. CONTROLS: Safegate joystic

Z-Chair

The Z-Chair is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 29 x 19 inches (without foot platform) with a 1.75-inch ground clearance and a 26.75-inch turning radius (with foot platform). This lightweight wheelchair has a limited suspension and a 3-inch rear anti-tips. The chair can be disassembled into 4 parts for easy transport. The chair is available in red and blue. CONTROLS: 40 amp

Parent Category: Powered Wheelchairs
 
Processing...


Driving Walking/Biking Public Transit  Get Directions