Capacity 301 To 400 Pounds

Results: 381

2-Way Lift Chair (Model 70556)

The 2-Way Lift Chair, model 70556, is a seat lift chair and recliner designed for use by individuals with mobility disabilities. This two-position chair features quiet and smooth lift and recline. With a touch of a button the chair lifts the user up. A built-in emergency battery back-up allows the chair to return to the sitting position in the event of a power outage. POWER: Uses household current; the backup uses 9-volt batteries (not included). DIMENSIONS (HxW): The chair is 43 x 29 inches. Th

3G Arrow Rear Wheel Drive Power Wheelchair With Truetrack

The 3G Arrow Rear Wheel Drive Power Wheelchair with TrueTrack is a powered wheelchair designed for use by individuals with mobility, neurological, or lower extremity disabilities or spinal cord injury. TrueTrack technology translates the driver's commands to help keep the power chair on a true forward path and minimize the need for veer correction on slopes, thresholds, and uneven terrain. FRAME (LxW): 28.5 (short base) or 31.5 (long base) x 12 to 24 inches. The frame is available in silver, bla

Access Dinghy 303 Wide Seater

The Access Dinghy 303 Wide Seater is an accessible sailboat designed for use by individuals with spinal cord injury. This boat can be sailed single-handedly or by two full- sized adults. It has a wide hammock seat and manual joystick steering. Sails include a mainsail and a free standing, self-tacking Jib, with three control lines. To prevent capsizing and promote stability, the boat has a ballasted centerboard and a concave hull shape. A roller reefing system enables the sailor to adjust the si

Access Ramp

The Access Ramp is a swimming pool ramp designed for use by individuals with mobility, severe physical, or lower extremity disabilities or spinal cord injury. Custom fabricated for each pool, this ramp has a structural fiberglass T-Bar slip-resistant surface and wheels for portability. Mounting hardware is included. DIMENSIONS (LxW): 15 feet x 36 inches. CAPACITY: 400 pounds.

Adapta Traction Tables (Models Aet-4 & Aft-4)

The Adapta Traction Tables are powered heiight-adjustable traction systems, model AET-4, or fixed height traction systems, model AFT-4. Each table has foursections. The head section adjusts up or down 25 degrees and includes a breathing slot cut-out. The large pelvic and lumbar section elevates 50 degrees. The center section is removable, and the thoracic section is stationary. Each model features vinyl upholstery with foam padding. OPTIONS: Casters, examination table paper holder, and a foot co

Adjustable Transfer Bench (Model 16B903A)

The Adjustable Transfer Bench, model 16B903A, is a transfer bench designed for use by individuals with mobility disabilities or spinal cord injury. The bench features a built-in handheld shower holder and suction feet and it adapts easily for left- or right-hand tubs. DIMENSIONS (HxW): 16 to 21 x 30 inches. CAPACITY: 350 pounds.

Adult Dual Paddle Extra-Wide Walker

The Adult Dual Paddle Extra-Wide Walker is a folding adjustable walker designed for use by individuals with walking disabilities who need additional weight capacity and width between the handgrips. The Ergonomic Paddle can be depressed with the palm for folding and unfolding of the walker. The handles "lock-in" when the walker is opened. This walker folds flat for compact storage. OPTIONS: Walker wheel and glide accessories are available. DIMENSION (HxDxW): 30 x 17 x 22 inches. The height adjust

Adventure

Adventure is an powered wheelchair designed for indoor or outdoor use by individuals with mobility disabilities or spinal cord injury. This fully modular wheelchair can climb curbs up to 3 inches high, or up to 5 inches with the optional curb climber. The parts were designed for use outdoors, including in damp meadows or light rain. The unit can climb an 18 percent incline with a 308 pound load. FRAME (HxLxW): 38 x 43 x 26.5 inches (including footrest). The chassis is 17 inches high x 36 inches

Aislemaster Boarding Transfer Chair (Models 8000 & 8010)

The AisleMaster Boarding Transfer Chair, models 8000 and 8010, is a transfer wheelchair for onboard an airplane designed for use by individuals with lower extremity, mobility, and neurological disabilities, or spinal cord injury. This wheelchair is designed to fit narrow aisles and confined spaces for use in boarding aircraft. Model 8000 fits jet aircraft and model 8010 fits commuter aircraft. FRAME (HxLxW): Model 8000 is 48 x 32 x 16 inches and model 8010 is 48 x 32 x 13 inches. Both models hav

Ameriglide Auto Scooter Lift 350

The AmeriGlide Auto Scooter Lift 350 is a hitch-mounted scooter carrier designed for use by individuals with mobility disabilities. The self-adjusting hold down arm is compatible with most scooters on the market. As the large aluminum platform starts to lift after the user drives the scooter onto it, the hold down arm engages automatically and applies the right amount of tension to hold the scooter securely in place. The platform also folds up automatically when not in use. The lift can carry sc

Ameriglide Extender Plus

The AmeriGlide Extender Plus is a scooter or wheelchair loader for van designed for use by individuals with mobility disabilities. This interior-mounted lift can load a power chair or scooter into a full size van or minivan for transport. The lift is constructed from steel with a protective finish. It has an industrial rated 12-volt motor. The user drives on and connects the strap, and the lift loads the scooter or wheelchair. The maximum travel distance from the ground 26 inches. POWER: Uses ba

Ameriglide Premium Bath Lift

The AmeriGlide Premium Bath Lift is a powered bath lift designed for use by individuals with balance, lower extremity, or mobility disabilities or arthritis. The lift has a large, fold-down seat with automatic recline, and installs in the tub with suction cups. It can be disassembled for storage or transport. OPTIONS: Headrest with wing backs; swivel slide; lap harness with pommel; chest harness with pommel. POWER: Uses rechargeable battery. DIMENSIONS: Seat is 3.1 inches from the bottom of the

Ameriglide Rear-Door Drive-Thru Lift 350

The Rear Door Drive-Thru Lift 350 is a powered wheelchair or scooter loader for vans designed for use by individuals with mobility disabilities. This lift attaches to the vehicle's third-row seating hardware. When in operation, a platform extends out on rails from inside until it clears the rear of the vehicle. From there, the platform lowers to the ground. The user drives the power chair or scooter onto the platform, attaches the straps, and presses a button on a remote hand control. The power

Ameriglide Tilt-N-Go 350 Mini Lift

The Ameriglide Tilt-N-Go 350 Mini Lift is a hitch-mounted scooter carrier designed for transporting travel-size scooters. This all- aluminum carrier uses a 2-inch Class 3 hitch. OPTIONS: Class 2 hitch adapter; mobility cover; Class 3 Receiver Hitch. DIMENSIONS (LxW): Usable platform area is 44 x 24 inches. CAPACITY: 350 pounds. WEIGHT: 46 pounds.

Ameriglide Universal 350 Truck Bed Lift

The Ameriglide Universal 350 Tuck Bed Lift is a scooter or wheelchair loader for pickup trucks designed for use by individuals with mobility disabilities. With the push of a button, this unit can lift almost any mobility scooter or electric power wheelchair into a truck's bed using a boom arm and powered rotation (PR). It can be mounted on either side of the vehicle in most pickup trucks, whether it has an extended bed or an extended cab. Made from weather- resistant materials, the unit has an a

Ameriglide Universal 400 Pr Chair And Scooter Lift

The Ameriglide Universal 400 PR (Power Rotation) Chair and Scooter Lift is a wheelchair and scooter loader designed for use by individuals with mobility disabilities. This lift has a powered rotation boom for loading. It mounts inside the vehicle on either side and has an adjustable base and boom. An integrated offset post ensures that the user's scooter or wheelchair clears the vehicle's bumper. The telescoping boom has adjustable length and pitch that adjusts from 0 to 30 degrees. The unit has

Ameriglide Universal Outside Lift 350

The Universal Outside Lift 350 is a hitch mounted wheelchair or scooter loader designed for use by individuals with mobility disabilities. This lift works with both Class II and Class III hitches, and with most mobility scooters and electric power chairs. The user drives the scooter or wheelchair onto the aluminum platform and secures it in place using the built in retractors. Once the retractors are locked in place, the user pushes a button. The lift. DIMENSIONS: This loader can hold scooters u

Ameriglide Universal Outside Lift 350 Xl

The Ameriglide Universal Outside Lift 350 XL is a wheelchair or scooter loader designed for use by individuals with mobility disabilities. This unit can lift larger electric wheelchairs and scooters with wheelbases up to 48 inches long. Retractors lock the wheelchair or scooter in place. Due to its size, this unit works only with a Class III hitch. The unit comes with a standard Class III hitch receiver. POWER: Uses battery. An optional battery pack is available. OPTIONS: Swing-away arm; scooter

Amigo Escort

Amigo Escort is a powered transport wheelchair designed for indoor or outdoor use by individuals with lower extremity, mobility, neurological, or severe physical disabilities or spinal cord injury. This chair is equipped with an oxygen tank holder FRAME (HxLxW): 37.3 x 32.7 x 24.1 inches. The chair has a steel platform painted cinnamon red, with a turning radius of 21 inches and an underbody ground clearance of 3.3 inches. CONTROLS: ASIC MPC electronic controller with HI/LO control with On/Off

Amigo Ext

The Amigo EXT is a scooter designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury. This scooter is designed for larger-framed individuals, 6 feet tall and over. It is similar to the Amigo RD (see separate entry) with a 4-inch longer platform and a 2-inch longer handle. FRAME (HxLxW): 39.5 x 47.8 x 23.5 inches. The steel frame, painted cinnamon red, has a one-piece extended platform and a black rear safety bumper. The turning radius is 38

Amigo Rd

Amigo RD is a three-wheeled scooter designed for use by individuals with lower extremity and mobility disabilities. FRAME (HxLxW): 37.8 x 43.8 x 23.5 inches. The one-piece, painted steel platform has a 34-inch turning radius and a 3.5-inch underbody ground clearance. The scooter is available in a choice of cinnamon red, pacific blue, champagne beige or midnight black, with a black rear safety bumper. A basket mounted on the front of the tiller is standard. A basket mounted on the front of the ti

Angled Swivel Bar (Model 9029)

Angled swivel bar is inverted V shape to allow clearance of head. Straight swivel bar is needed for more seat clearance and all car transfers. CAPACITY: 400 pounds.

Aquatec Ocean Xl (Model 713900)

The Aquatec Ocean XL model A713900, is a height-adjustable wheelchair shower commode designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. The chair is constructed from stainless steel for maintenance-free use. The seat frame has a static ten-degree back tilt for comfort and the back upholstery is adjustable. Features include adjustable swing-away footrests, standard heel loops, locking casters, and flip-up arms. The chair rolls over most standard t

Aquatic Access Lift(Model Igat-180/135)

The Aquatic Access Lift, model IGAT-180/135, is a pool and in-ground spa lift designed for use by individuals with mobility or neurological disabilities or spinal cord injury. Self-operable, this lift is designed for use with in-ground pools or spas with built-in benches and is powered by water. The seat features automatic 135-degree clockwise seat turn (opposite turn available), a right armrest, and a flip-up footrest attached to a mounting arm under the seat. The seat rotates forward to enter

Arjo Dextra

Adjustable mechanical patient lift. Sling and frame design accommodates all types and sizes of people. C shaped base, 715 mm by 810 mm, for passing through narrow doorways and access to bulky wheelchairs. Contoured, reinforced slings with built in head support connect at four attachment points. Machine washable. Polyester. Tilting frame allows for upright or reclined positioning of person in sling. Wide lifting range allows lifting from floor up to high bed. Patient is transported at chair heigh

Arjo Lift Hygiene Chair, Arjo Lift Ride Chair, Arjo Lift Bath Trolley, & Arjo Therapy Trolley

Height adjustable battery powered patient lifts for single attendant transfers without lifting. U shaped base on casters. Lift stops automatically on contact with any obstruction. Height adjustment range to 23 1/2 inches. Lift ride chairs have range of 21 1/2 inches. 6 amp battery enclosed in plastic case. Low battery indicator light signals when 60% of capacity is used. Battery charger has circuitry for preventing overcharging. Maximum lift capacity 330 pounds. Lift Hygiene Chair has 2 part sea

Arjo Maxilift

Adjustable battery powered patient lift. Sling and frame design accommodates all types and sizes of people. Adjustable base for passing through narrow doorways and access to bulky wheelchairs. Contoured, reinforced slings with built in head support connect at four attachment points. Machine washable. Polyester. Tilting frame allows upright or reclined positioning in sling during transfer. Wide lifting range allows lifting from floor up to high bed. Remote control. 24V rechargeable battery with i

Ascender Mp 300, Mp 500, Mp 1000, & Mp 1000 Plus Waiting Room / Office Chair (Models 8000, 8200, 8400, & 8600)

The Ascender MP 300, MP 500, MP 1000, and MP 1000 Plus Waiting Room / Office Chair are heavy-duty office chairs designed for use by individuals with lower extremity disabilities. These mission-style chairs have an adjustable back with four back positions covering a range of approximately 90 to 70 degrees. By flipping a lever on the side of the chair, the seat pan can be placed in a 10-degree forward slope. Other features include EZ Grip armrests and a blood-drawing armrest attachment. OPTIONS: E

Aspen Battery Powered Lift (Model Bp350)

The Aspen Battery Powered Lift, model BP350, is a pool lift designed for use by individual with lower extremity, mobility, or severe physical disabilities or spinal cord injury. This lift lift is designed for installation in the decks of in-ground and above-ground pools/spas and has a single anchor point. The unit accommodates multiple setbacks, allowing for installation on pools/spas with large gutters and/or coping stones and has stainless steel construction with no paint to chip and no dissim

Auto-Zero Weight Module (Model Sr801)

The Auto-Zero Weight Module, model SR801, is a transfer lift scale attachment designed for use by individuals with mobility disabilities or spinal cord injury. This self-contained, portable weight module converts Hoyer lift models C-HLA, P-HLA, E-C-HLA, P-C-HLA, and C-HLA-RB, or Invacare lift models from the 9800 and 9900 Series into a digital scale system. The scale has a five-digit liquid crystal display (LCD) that shows weight in either pounds or kilograms. POWER: Uses one 9-volt battery. DIM

Automatic Power Chair Lift (Model Al550)

The Automatic Power Chair Lift, model AL550, is a platform van lift designed for use by individuals with mobility disabilities or spinal cord injury. The lift's docking station features a self-aligning base, enabling the user to drive onto the platform and be locked in place. An audible latching sound is heard as the chair's pin passes into the locking mechanism, and attempting to back the chair verifies that the latch is locked. The docking base also includes a bright colored indicator pin to c

B*mobile Ambassador (Model Dks500)

The B*MOBILE Ambassador, model DKS500, is a four-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. This scooter is equipped with a front basket, dual rear view mirrors, cell phone holder, and water bottle holder. FRAME (HxLxW): 37 x 47 x 25 inches. This scooter has front and rear suspension and a 43-inch turning radius. CONTROLS: Dynamic Rhino 70-AMP controller. SEAT (LxWxH): 19 x 19 x 27 inches. The adjustable reclining high-back seat has a headrest,

B*mobile Executive (Model Dks320)

The B*MOBILE Executive, model DKS320, is a three-wheeled scooter designed for multi-surface use by individuals with mobility disabilities. This scooter includes a front basket, dual rear view mirrors, and holder for a cell phone and water bottle. FRAME (HxLxW): 37 x 47 x 27 inches. This scooter has rear suspension and a 39-inch turning radius. CONTROLS: Dynamic Rhino 70-AMP controller. SEAT (LxWxH): 19 x 19 x 27 inches. The adjustable, reclining high-back seat is equipped with a full-range slidi

Bariatric Quad Cane (Model 840-350)

The Bariatric Quad Cane, model 840-350, is an adjustable quad cane designed for obese individuals with balance or walking disabilities. This cane is made of anodized aluminum tubing with tube-in-tube construction in the handle for added strength. DIMENSIONS: The height adjusts from 32.5 to 35.5 inches to accommodate users from 5 feet, 3 inches to 6 feet tall. The tubing is 1 inch in diamether. CAPACITY: 350 pounds.

Barrier Free Lift Unilift Ceiling Lift

The Barrier Free Lift Unilift Ceiling Lift is an overhead transfer lift designed for use with individuals with mobility disabilities. Available with a ceiling-mounted track or free-standing frame, this unit permits a horizontal change of direction to be performed by hand or with a motor. The transverse track system uses two tracks: one track is installed the entire length of the room and the other is a perpendicular track installed the entire width of the room. The lift can move on either track

Bath Seat (Model 1880A)

The Bath Seat, model 1880A, is a bathtub seat designed for use by individuals with balance or mobility disabilities. This tip-up bath seat has teakwood slats on a brass frame. Installed on the bathtub wall, it can be folded up to the wall when not in use. The seat comes with mounting brackets and screws. DIMENSIONS (DxW): Seat is 12.75 x 18.75 inches. When up, the seat projection is 2.5 inches. CAPACITY: 400 pounds. COLOR: The frame is available with a with a stainless steel, chrome, polished n

Beamer Personal Transport Vehicle

The Beamer Personal Transport Vehicle is a powered wheelchair alternative designed for use by individuals with lower extremity disabilities or people who lack stamina. The Beamer is an electric transportation device on which the user stands when in motion. 500 watt motors in the hub of each of the two front wheels power this device. It has a horn, brake light, turn signals, and tail light. The vehicle has two back wheels for added stability, reinforced steel rider platform with high-impact plas

Beasyglyder 32

The BeasyGlyder is a transfer board system designed to assist individuals in transferring between a wheelchair and bed, shower bench, commode, car, chair, etc or between a stretcher and a bed. This device is crescent-shaped to fit around wheelchair arms and wheels. It features an elongated S-shaped groove in the center to serve as a track for a round seat that rotates up to 360 degrees and slides from one end of the track to the other. Because the seat slides with the user, the shear stress and

Beasytrans Easy Transfer System (Ets) & Beasy Ii Easy Transfer System (Ets)

The BeasyTrans ETS and Beasy II ETS are transfer board systems designed to assist individuals with transfer between a wheelchair and a bed, shower bench, commode, car, chair, etc. or a stretcher and a bed. These devices differ from other transfer devices in that they have sliding seats that move from one end of a central elongated S-shaped track to the other. Because the seats slide with the user, the shear stress and friction associated with moving is borne by the system, not the users' skin.

Bedside Commode (Model 8450)

The Bedside Commode, model 8450, is a height-adjustable commode designed for use by individuals with balance, mobility, and incontinence. The commode has a rust-resistant, powder-coated welded frame and includes a back, pail, and splash guard. DIMENSIONS: Seat height adjusts from 17 to 23 inches; the width between the arms is 18 inchesand the overall width is 22 inches; seat depth to backrest is 17.5 inches. CAPACITY: Maximum weight capacity is 350 pounds.

Bellaire With Lumbar Support

The Bellaire with Lumbar Support is a seat lift recliner chair designed for use by individuals with mobility disabilities. This motorized chair has a hardwood frame; a welded steel base; heavy-gauge, no-sag steel springs in the seat and back; dacron fibers in the arms, back, and chaise for shape retention; and a cushioned seat for comfort and support. Covered in acrylic Wear-Dated fabric, this chair also features Scotchgard fabric protection, dual magazine pockets, adjustable lumbar support, tri

Belmont Pu Corner Shower Stool (Model 124)

The Belmont PU Corner Shower Stool, model 124, is an adjustable shower stool designed for us by individuals with mobility or balance disabilities. This stool has a plastic coated tubular steel frame and a polyurethane molded padded seat. It is designed to fit into the corner of a shower, allowing full access to the caretaker. It has four rubber tip legs. DIMENSIONS: The seat height adjusts from 20 to 24 inches, the seat width is 16 inches, and the seat depth is 13.125 inches. The footprint is 1

Benebath Shower & Bath Bench

The BeneBath Shower and Bath Bench is a bath and shower bench designed for use by individuals with mobility or balance disabilities. This lightweight bench has an anodized aluminum frame with a molded plastic seat, and features contoured removable seat pads; separately height-adjustable legs; large, flared, non-skid, contoured feet; pin locks for securing adjustable parts; and molded handles in the seat. The bench can be disassembled for storage or transport in a zippered carrying bag (included)

Benebath Shower & Bath Chair

The BeneBath Shower and Bath Chair is a bath seat and shower chair designed for use by individuals with mobility or balance disabilities. This lightweight chair has an anodized aluminum frame with a molded plastic seat and back. Features include contoured seat and back pads; separately height adjustable legs; large, flared, non-skid, contoured feet; pin locks for securing adjustable parts; and molded handles in the seat and back. The chair back is positioned at a slight angle for comfort. The pa

Beneke Universal Sheltering Arms Seats (Models Sa500 Pc, Sa501 Pc, & Sa507 Pc)

The Beneke Universal Sheltering Arms Seats, models SA500 PC, SA501 PC, and SA507 PC, are safety frames with elongated seats designed to attach to toilets. The support arms are fashioned from one continuous piece of heavy-gauge, non-corrosive stainless steel tubing with a powder coat finish. Arms have polypropylene pistol grips. Model SA500 PC comes with a closed front seat with cover. Model SA501 PC comes with an open front seat with cover. Model SA507 PC comes with a closed front seat without c

Bentley

The Bentley is an adult manual tilt-in-space wheelchair designed for use by individuals with mobility, lower extremity, neurological, or severe physical disabilities or spinal cord injury. This chair can be propelled by hand and/or foot in and out of tilt. FRAME: The overall width with 12- or 16-inch wheels is the seat width plus 9.5 inches; with 20- or 24-inch wheels and hand rims the overall width is the seat width plus 10.5 inches and without hand rims, the width is the seat width plus 9 inch

Biodex Balance System Sd

The Biodex Balance System SD is a balance training biofeedback device designed for use by individuals with balance disabilities. The user stands on a platform while viewing real-time visual biofeedback on a high-resolution color touch-screen liquid crystal display (LCD). The platform tilts 20 degrees from horizontal in all directions, and comes with two adjustable support handles that lock in place for safety or swing away for an unobstructed, open environment for a variety of training activitie

Black Fiberglass Cane With An Explorer Handle

The Black Fiberglass Cane with an Explorer Handle is a straight cane designed for individuals with mobility disabilities. This heavy-duty fiberglass cane has a contoured Explorer Handle. DIMENSIONS: The cane height is 36 inches. CAPACITY: 350 pounds. COLOR: Black.

Black Hawk Chief (Model 107-Zrx)

The Black Hawk Chief, model 107-ZRX, is a powered stand up wheelchair designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. The system allows variable blendability of all positions, and compensates mechanically for body position by moving armrests and positioning devices such as lateral supports. FRAME (LxW): 38 x 23 inch frame. Ground clearance is 4 inches without anti-tipper wheels; turning radius is 29 inches. Custom sizing is available for indiv

Black Widow, The

The Black Widow is a straight cane designed for use by individuals with balance or walking disabilities. Machined from aluminum, this cane has a long Fritz handle with a spider web set onto the handle and shaft. The end of the handle facing away from the user features a black widow spider image. A rubber tip and wrist strap are included. DIMENSIONS: Available from 29 to 38 inches long in half-inch increments. CAPACITY: 350 pounds. COLOR: The shaft is midnight black with polished aluminum rings.

Body-Aline

The Body-Aline is an exercise machine and posture training activity for people with posture problems due to neuromuscular disabilities or lumbar issues. It is designed to gently stretch and strengthen the back and trunk postural muscles. The Body-Aline consists of a bench on which the users sits. A vertical bar is mounted in the rear of the bench with arm bars extending forward on either side of the user. There is also a foam roller mounted on the vertical bar. The heights of the arm bar and the

Bozeman Therapy Steps

The Bozeman Therapy Steps are swimming pool stairs designed for use by individuals with lower extremith or balance disabilities or arthritis. Custom designed for each pool, these fiberglass T-Bar steps are slip-resistant, UV stabilized, and have raised stainless steel and rails. Poly netting is provided under the stairs and sides to avoid risk of entrapment. The unit is equipped with four wheels for portability. The unit is available with 3, 4, 5, or 6 steps. DIMENSIONS: The steps are 31 inches

Bruno Big Lifter (Model Vsl-570)

The Bruno Big Lifter, model VSL 570, is a wheelchair and scooter loader designed for use at the rear of minivans, sport utility vehicles, and full size vans. The Big Lifter's manual swing has a low-resistance design, requiring minimum strength. Installation requires no structural modification. The adjustable low-profile arm allows the placement of larger power bases into smaller vehicle openings. A Bruno Custom Base provides for mounting the lift in the appropriate location. POWER: Big Lifter is

Bruno Electra-Ride Iii (Model Cre-2110)

The Bruno Electra-Ride III, model CRE-2110, is a custom rail interior seat lift designed for individuals with mobility disabilities and cognitive disabilities. The stairlift rail can be installed as close as 7 inches from the wall. The unit anchors to the steps, not the wall. Tight radius inside turns fit typical bi-level houses. The tight turn and narrow rail will keep the majority of the staircase free of obstruction. The height-adjustable seat swivels and locks at 45 degrees (bottom), 0 degre

Bruno Turning Automotive Seating (Tas) 2400 & 2400E Package

The Bruno Turning Automotive Seating (TAS) 2400 Turnout is a swivel seat base designed for use by individuals with mobility disabilities who have difficulty getting in and out of a car or minivan. The Turnout is installed on a vehicle-specific custom base plate assembly. The swivel base is engineered for ease of installation and use. The seat pivots out and over the door still and is available for both the driver and the passenger side. The 2400 has manual turnourt and the 2400E has powered tur

Bruno Turning Automotive Seating (Tas) 2500 Turny

The Bruno Turning Automotive Seating (TAS) 2500 Turny is a powered turning automotive seat base designed for use by individuals with severe physical disabilities and mobility disabilities who have difficulty entering and exiting minivans, pickup trucks, and full-size vans. The Turny replaces the existing seat base with a swivel, power up and down base. It allows for an even height transfer from a mobility device or can be lowered to 12 or 16 inches. The base swivels manually. The hand control fi

Bruno Turnout Turning Automotive Seating (Model Tas-2400/2400E)

The Bruno Turnout Turning Automotive Seating, model TAS-2400/2400E, is a swivel base designed for use by individuals with mobility disabilities who have difficulty getting in and out of a car or minivan. The unit is installed on a vehicle-specific custom base plate assembly and is available in a manual (TAS-2400) or powered (TAS-2400E) model. The seat rotates out over the doorsill, bridging the gap for a safe transfer onto the seat. Once the user is on the seat, it rotates back into the vehicle.

Catalyst 4 And Catalyst 4 Super Low

The Catalyst 4 and Catalyst 4 Super Low are lightweight folding adult manual wheelchairs designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of 6061-T6 aircraft aluminum. It features an offset axle plate that offers rear seat height adjustability, and the axle plate can be reversed for amputees. A heavy duty frame (350 pounds capacity) and rear anti-tips are optional. The frame is available in a varie

Catalyst 4C

The Catalyst 4C is a lightweight folding adult manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of 6061-T6 aircraft aluminum. It features an offset axle plate that offers rear seat height adjustability, and the axle plate can be reversed for amputees. A heavy duty frame (350 pounds capacity) and rear anti-tips are optional. The frame is available in a variety of colors in matte or

Catalyst 4Ttl

The Catalyst 4TTL is a lightweight folding adult manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of 6061-T6 aircraft aluminum. It features an offset axle plate that offers rear seat height adjustability, and the axle plate can be reversed for amputees. A heavy duty frame (350 pounds capacity) and rear anti-tips are optional. The frame is available in a variety of colors in matte

Catalyst 5Ttl

The Catalyst 5TTL is a lightweight folding adult manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of 6061-T6 aircraft aluminum. It is available in two optional versions - Heavy Duty Option and Transit System. A depth adjustable rear frame also is optional that allows for adjustments of 2 inches forward and 3 inches forward. The frame can be ordered with the center of gravity set i

Catalyst 5Vx

The Catalyst 5Vx is a lightweight folding adult manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of 6061-T6 aircraft aluminum. It is available in two optional versions - Heavy Duty Option and Transit System. The frame can be ordered with the center of gravity set in the rear, center or forward by axle position. Rear anti-tips are available for all versions. A variety of colors are

Celebrity X 4 Wheel

The Celebrity X 4 Wheel is a four-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with bright LED lights, a front basket, and a rear view mirror. FRAME(LxW): 46.75 x 24 inches with a 34.75-inch wheel base. The turning radius is 59 inches and the ground clearance is 3.5 inches. The frame has front and rear suspension, rear anti-tips, disassembles for transport, and features auto-latching lockup for ease of assembly and disassembly. The frame al

Chair Scale (Models 475 & 4751)

The Chair Scale is designed for weighing persons in a sitting position. The chair features lift-up padded armrests for easier transfers, and a fold up footrest. Model 475 has a mechanical beam scale; Model 6475 has a digital scale with pounds/kilograms conversion, LED display, and an optional battery power for portability. CAPACITY: 350 pounds. WEIGHT: 94 pounds. COLOR: Silver and black.

Chairmaster

Chair Master is a chair that is designed for individuals who have mobility disabilities due to generalized weakness or neurological impairments. The ChairMaster is designed to allow users to sit comfortably while exercising. It combines a low impact cycling workout with resistance training to create a versatile resistance chair. It is suitable for all ages and fitness levels. The ChairMaster is designed to: Increase strength and flexibility - with smooth, low-impact resistance cords instead

Challenger Bx 6000 (Models 6000, 6000E, 6000X, & 6000Xe)

The Challenger BX 6000 is a rigid heavy-duty powered wheelchair designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 6000 model, this wheelchair also comes with an extra-wide seat (noted with an "X" in the model number). FRAME (HxLxW): 37 to 39 x 42 x 26 inches. With elevating legrests, the length is 44 inches. The length without the footrests is 30 inches. The rigid one-piece polyester-coated power base

Challenger Px (Model 6500)

The Challenger PX, model 6500, is a rigid heavy- duty powered wheelchair designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 40 to 46 x 46 x 26 inches. The length without the footplate is 34 inches. The turning radius with footrests is 20.25 inches. The rigid one-piece polyester-coated power base frame includes front anti-tippers and a power shock system. The seat frame is black and the base is available in midnight

Challenger Recliner 2540 (Models 2540E & 2540Xe)

The Challenger Recliner. model 2540, is a heavy- duty powered folding wheelchair with a manual reclining back designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 2540E model, this wheelchair also comes in a wide (XE) version. FRAME (HxLxW): 42 (with seat back upright) x 36 x 30 or 32 inches. With extended footrests (standard), the length is 49 inches. The folded dimensions (LxW) are 36 x 15 inches. The f

Chattanooga Wheelchair Cushion

The Chattanooga Wheelchair Cushion is a gel flotation seat cushion designed for use with wheelchairs. The top layer is made of antibacterial treated brushed tricot and the bottom layer is made of nylon pack cloth. The cushion has a gel-like center. The cushion has a built-in carrying handle. DIMENSIONS: The cushion is 17.5 x 18.5 x 2 inches. The carrying handle is 6 x 1 inch. CAPACITY: 325 pounds. WEIGHT: 12 pounds.

Comfort Carrier Transfer Sling

The Comfort Carrier Transfer Sling is a manual transfer sling designed for use by wheelchair users with spinal cord injury, neurological disabilities, stroke, cerebral palsy, or brain injury. This sling enables wheelchair users to transfer with assistance from two helpers. The sling is slipped around the seated user, then is crisscrossed under the thighs and its buckle is fastened. Two assistants (in front and back or on each side) lift and transfer. The foldable sling is lightweight and machine

Comfort Shower Chair

The Comfort Shower Chair is a shower stool designed for use by individuals with mobility disabilities. This chair has a tubular frame and armrests, a padded backrest, and a padded commode-style seat. DIMENSIONS: The seat is 14 inches wide and the base is 22.5 x 20 inches. CAPACITY: 335 pounds.

Companion Ii 4-Wheel Scooter (Model Gc-421)

The Companion 4-Wheel Scooter, model GC-421, is a compact, 4-wheeled scooter designed for use indoors and outdoors by individuals with mobility disabilities. The scooter comes standard with a front basket, headlight, tail light. FRAME(LxW): 49.5 x 23.75 inches. The turning radius is 58.5 inches and the ground clearance is 4 inches. This scooter disassembles for transport and has a carpeted floor mat and expanded foot and leg room. The body is available in vermillion red, Arctic blue, or Sahara.

Cougar Lifts, Personal Lifts

The Cougar Lifts and Personal Lifts are elevating platforms designed to lift an individual straight up for tasks such as changing high lightbulbs, etc. The base has four wheels with extending locks to expand the wheelbase and secure it while the lift is elevated. CAPACITY: Maximum load capacity 400 pounds. POWER: 12 volt battery. DIMENSIONS: Working heights are 16 or 24 feet. The platform is 26 x 38 inches.

Covered Outside Lift (Model Al3000)

The Covered Outside Lift, model AL3000, is a hitch-mounted scooter or powered wheelchair carrier designed for use by individuals who use wheelchairs. The plastic watertight cover keeps power chairs and scooters safe while the spring-assisted operation makes the cover easier to open and close. The carrier can be mounted on a class II or III trailer hitch and includes an integrated license plate mount. OPTIONS: Swing-away option. CAPACITY: 350 pounds. WARRANTY: Three-year transferable warranty.

Crusader, The

The Crusader is a straight cane designed for use by individuals with balance or walking disabilities. Machined from solid billet aluminum, this cane carries a biker motif with the Maltese cross and has a Fritz handle. A rubber tip and wrist strap are included. OPTIONS: Skull or sphere handle. DIMENSIONS: Available from 29 to 38 inches long in half-inch increments. CAPACITY: 350 pounds. COLOR: The shaft is black and polished aluminum. The Fritz handle is available in polished aluminum or black.

Ctm 3-Wheel Road Class Scooter (Model Hs-730)

The CTM 3-Wheel Road Class Scooter, model HS-730, is a 3-wheeled heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front and rear bumpers, a headlight, directional signals, rear view mirror, and under-seat storage. FRAME (HxLxW): 39.8 x 53.5 x 25.2 inches. The ground clearance is 3.0 inches and the turning radius is 43.3 inches. Color choices are blue, silver, or red. CONTROLS: Adjustable tiller with charging port, ke

Ctm 4-Wheel Deluxe Scooter (Model Hs-686)

The CTM 4-Wheel Deluxe Scooter, model HS-686, is a 4-wheeled heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front and rear bumpers, headlight, directional signals, rear view mirror, and under-seat storage. FRAME (HxLxW): 39.8 x 52.4 x 25.2 inches. The ground clearance is 3.0 inches and the turning radius is 43.5 inches. Color choices are blue, silver, or red. CONTROLS: Adjustable tiller with charging port, key swit

Ctm 4-Wheel Road Class Scooter (Model Hs-740)

The CTM 4-Wheel Road Class Scooter, model HS-740, is a 4-wheeled heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front and rear bumpers, headlight, directional signals, rear view mirror, and under-seat storage. FRAME (HxLxW): 39.8 x 55.5 x 25.2 inches. The ground clearance is 3.0 inches and the turning radius is 66.9 inches. Color choices are blue, silver, or red. CONTROLS: Adjustable-angle tiller with charging port

Curved Transfer Board

The Curved Transfer Board is a transfer board designed for use by individuals who use wheelchairs. Made of solid, reinforced, waterproof plastic that resists chipping, shattering, and splintering, this board has tapered ends and a smooth surface for easy sliding. The curved design accommodates a variety of transfer situations, and slip-resistant pads on the underside at each end increase stability. DIMENSIONS: 27 5/8 inches long and 14 5/8 inches wide tapering to 10 1/8 inches wide in the middle

Daily-Weigh Scale (Model Sr255)

The Daily-Weigh Scale, model SR255, is a digital hydraulic lift scale designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. The scale has a wheeled base, a hydraulic lifting mechanism, and a tray on which the person to be weighed lies. Weight readings are displayed in pounds or kilograms on a 16-character liquid crystal digital display (LCD). The unit also has auto power shut down. POWER: Uses six D cell alkaline batteries and is equipped with a low

Daytona 3 Gt (Models S35005Gt & S35006Gt)

The Daytona 3 GT, models S35005GT and S35006GT, is a three-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 47.4 x 22.8 x 40 inches. The ground clearance is 2.5 inches, and the turning radius is 40.2 inches. The unit includes rear anti-tip wheels, a headlight, a tail light, a front large carry basket, and a front bumper. The scooter can be disa

Daytona 4 Gt (Models S4501Gt & S4502Gt)

The Daytona 4 GT, models S45001GT and S45002GT, is a four-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 49.6 x 22.8 x 44 inches. The ground clearance is 3 inches, and the turning radius is 64 inches. This scooter includes rear anti-tip wheels, two headlights, a tail light, a front large carry basket, and a front bumper. It has anti-tippers.

Debug Beach Wheelchair

The DeBug Beach Wheelchair is an attendant-propelled beach wheelchair designed for use by individuals with mobility disabilities. FRAME: High-grade 316L stainless steel tubing. An articulating rear suspension system and push handles are included. The chair comes standard with a high-gloss, stainless steel finish. Custom powder-coat colors are available. Optional quick-release pins for disassembling the chair without tools are available. The chair is 33.5 inches wide with the standard wheels and

Deluxe Commode (Models 6458 & 6478)

The Deluxe Commodes are height-adjustable commodes designed for use by individuals with mobility disabilities. These commodes feature welded steel frames, molded plastic armrests, heavy-duty plastic seats and hinges, non-skid and non-marring rubber tips, and silencing collars to minimize rattles. The seat angle is adjustable by raising or lowering support frame for commode seat. Model 6458 also features a back support bar for added stability. Model 6478 does not have the back support bar and ma

Deluxe Folding Walker, Two Button V-Brace (Models 10200Dx-2 & 10201Dx-2)

The Deluxe Folding Two Button Walker with V-Brace is a folding height-adjustable walker designed for use by individuals with walking or balance disabilities. The walker is constructed of one-inch anodized, extruded aluminum. SIZES: Junior and adult. DIMENSIONS (HxW): 32 to 39 x 23 inches (model 10200DX-2) or 25 to 32 x 23 inches (model 10201DX-2). CAPACITY: 375 pounds. WEIGHT: 6.5 pounds (10200DX-2) or 6.3 pounds (10201DX-2).WARRANTY: Limited lifetime warranty.

Deluxe Raised Toilet Seat (Models 1632, 1634, 1636, 1682, & 1684)

The Deluxe Raised Toilet Seat is an elevated toilet seat designed for use by individuals with balance or mobility disabilities. The contoured seat distributes the user’s weight over a wide area to help hold the user in position. A wide frontal opening allows easy access for personal cleaning. The seat is made with one piece polyethylene molding, and is available with or without a lid. The lid has a high gloss finish. Three L-shaped stainless steel clamps are included for fitting to the toilet. D

Deluxe Tractor Scoot With Bucket Basket

The Deluxe Tractor Scoot with Bucket Basket is a garden stool designed for use by senior or individuals with arthritis or balance or walking disabilities. Constructed of steel tubing with a powder-coated finish, this four-wheeled, steerable stool enables the user to sit while gardening and steer around garden beds without getting up. The tractor-style seat is height adjustable and swivels a full 360 degrees. This stool includes an accessory tray and bucket basket that mount under and behind th

Diana Lift

The Diana Lift is a free-standing powered or hydraulic transfer lift designed for use with individuals with mobility disabilities. Available in mini, compact, and comfort models, the lifts come a choice of a manual hydraulic pump lifting mechanism or an electric motor and push-button controls. All models feaure a tip-free U-shaped base, easy-grip handlebars, a pinch-free boom arm, and four heavy-duty ball bearing double caster wheels for mobility. Two wheels are equipped with parking breaks for

Digital Chair Scale (Model 6475)

The Digital Chair Scale, model 6475, is designed to accommodate individuals needing to be weighed in a seated position. The unit features lift-away armrests and footrests, oversized transport wheels, power switch, L.E.D. readout, pound/kilogram selector switch, and a zero reset button. OPTIONS: Rechargeable Ni-cadmium battery pack ($195). POWER: 120 Alternating Current Volts (VAC), 50/60 Herz power adapter with 6 foot power cord. CAPACITY: 400 pounds or 181.4 kilograms. WEIGHT: 94 pounds. COLOR

Digital Scale (Model Bf 878)

The Digital Scale, model BF 878, is a transfer lift scale attachment designed to enable individuals with mobility disabilities to be weighed in a transfer lift. The compact self-contained scale attaches to the lift and provides a digital readout in pounds and kilograms. Calibrated to 0.1 percent in acuracy, this scale features automatic shutoff to conserve battery life. POWER: Uses one 9-volt lithium battery to provide approximately 3,000 readings. DIMENSIONS: 3 x 3 x 4 inches. CAPACITY: 400 pou

Dino Wheel

The Dino Wheel is a manual wheelchair wheel designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. The wheel has a hub milled from a solid piece of billet aluminum, with 12 tubular aluminum spokes, and double wall deep V aluminum rims. The wheel is lightweight and responsive to the user's push, and it has the strength for everyday use. The low spoke count allows access through the wheel. The wheel has standard 6-tab handring mounting holes. The maxim

Double Joyrider

The Double Joyrider is a 4-wheeled cycle with side-by-side seating for two people designed for use by individuals with balance, neurological, or physical disabilities. Designed similarly to a over-sized three-wheeler, this cycle features two large mag wheels in the rear and two independent smaller mag front wheels. This cycle offers independent pedaling, enabling two riders to pedal, one rider to pedal while the other rests, or one rider to pedal alone. Standard features include individual handl

E.fix Basic & E.fix Plus

E.fix Basic and E.fix Plus are add-on power units for manual wheelchairs designed for use by individuals with mobility disabilities or spinal cord injury. These units come as a solid insert or pneumatic drive wheel system for adult or children's manual wheelchairs. With the electric drive installed, the wheelchair remains foldable and portable. Users can switch from power to manual operation by turning the wheel hubs. The ergonomic joystick controller indicates battery capacity on a back lit liq

Eas Ille Lift Stretcher Ii (Model 197)

The EAS ILLE Lift Stretcher II, model 197, is a powered bath lift designed for transferring individuals from bed to therapeutic modality (e.g. whirlpool, tub, tank) for hydrotherapy. The stretcher has a tubular frame which is adjustable from 180 degrees horizontal to partial or full sitting position. The lift features a handheld pushbutton control, a U-shaped base, casters with a foot controlled locking and release device, side support at the hip section, and a headrest extension. POWER: Recharg

Easy Comfort Lift Chair (Model Lc200)

The Easy Comfort Lift Chair, model LC200, is a seat lift and recliner chair designed for use by individuals with physical or mobility disabilities. The chair has a two-position all-electric lift and reclining mechanism with a button control, which either tilts the user back to rest, or rises to help the user stand. The chair has a hardwood frame, a heavy-duty steel lift mechanism, and a wide seat with soft fabric. POWER: Uses household current, with integrated emergency battery backup. CAPACITY:

Easyglide (Models 5020, 5050, 5060, & 5070)

The Easyglide, models 5020, 5050, 5060, and 5070, is a transfer board designed for use by individuals with mobility disabilities. Designed to facilitate seated transfers between two surfaces, this hard, slick polypropylene board is also flexible to allow it to be bent over the wheel of a wheelchair. Anti-slip tape on the underside of the board prevents the board from sliding during use. This board also features a hand slot at each end. DIMENSIONS (LxWxH): Model 5020 is 24 x 13 x .2 inches. Model

Easystand Strapstand

The StrapStand is a standing aid designed for use by individuals with spinal cord injury, neurological disabilities, brain injury, or stroke. This sit-to-stand stander lifts the user directly from a wheelchair seat with lifting arms and a strap. The strap is positioned under the buttocks and attached to the lifting arms. Pumping the actuator handle lifts the user to standing position. This standing aid can be used by adults from 5 feet to 6 feet 5 inches tall. CAPACITY: 350 pounds.

Econoglide Transfer Boards

The Econoglide Series are Transfer boards designed to assist people with physcial disabilities in transferring from one surface to another. The boards are fabricated high density stress-relieved linear plastic. The moisture-proof boards are striate-sanded on one side and buff-sanded on the other. Models include the plain board, board with telescope and hand hole, board with hand hole, board with 2 hand holes, board with hand hole and notches, and board with 2 hand holes and notches. CAPACITY: 40

Econoslide Series Transfer Boards

Econoslide Series Transfer Boards are designed to assist people who use wheelchairs. The 20 models of these boards are made from defect-free 7-ply birch plywood and have rounded corners, ends, and edges. The surface is machine-sanded and finished with clear lacquer. Models include the plain board, board with hand hole and telescope, board with hand hole, board with hand hole and notches, board with 2 hand holes, and board with 2 hand holes and notches. CAPACITY: 400 pounds. DIMENSIONS: All model

Elevated Bathtub Seat

Elevated Bathtub Seat is designed for children and adults with physical disabilities who have difficulty sitting in a tub or standing in a shower. The open front and coccyx dimple in the back provide access for personal hygiene. Additional features include smooth, rounded corners for comfort, a finger indent handle for transport and suction cup feet for stability. DIMENSIONS: 13 x 15 ½ x 8 1/2” (33 x 39 x 22 cm) CAPACITY: Supports up to 400 lbs. (181.8 kg) WEIGHT: 4 ½ lbs. (2kg) WARRANTY/GUA

Elevated Push-Up Toilet Seat With Armrest ( Modelw38878 )

The Elevated Push-Up Toilet Seat with Armrest, model W38878, is an elevated toilet seat designed for use by individuals with balance or mobility disabilities or arthritis. This toilet seat is designed to help users to lower or push themselves up from a toilet seat with the added on elevation and armrests. The seat fits most standard toilet seats. Mounting hardware is included. Features include extra width between armrests and lateral gripping slots. DIMENSIONS: Width between armrests is 20.25 i

Elevator 350 Patient Lift

The Elevator 350 Patient Lift is a seat lift designed for use by individuals with balance, standing, mobility and walking disabilities or arthritis or spinal cord injury. This wheeled lift is lightweight and intended as an aid in lifting a person from floor level to a maximum height of 30 inches and transporting him or her, while seated, over short distances. It can be used in the home or in institutions. The lift's frame is constructed of powder coated, scratch resistant aluminum. It also featu

Endurance Heavy Duty Walker (Model W1800)

The Endurance Heavy Duty Walker, model W1800, is a height-adjustable rollator-style folding wheeled walker with seat designed for use by large individuals with walking or balance disabilities. This walker has a wide base for stability and features a padded, flip-up hinged seat; an adjustable back strap for seated security ; four mag wheels with flat-free tires and ball bearings; a clear tray; and a large storage basket under the seat. The unit is equipped with loop brakes on the handle bars. DIM

Enhansit (Model Ulf-3)

EnhanSit, model ULF-3, is an electronic seat lifting system that attaches to the bottom of recliners for use by persons with arthritis or mobility, lower extremity, balance, or neurological disabilities. This steel-frame system is engineered to offer full reclining and lifting capabilities while not interfering with or damaging the chair's existing features. The unit ships fully assembled and attaches to the bottom of rocker, wall-hugging, and stationary or simple push back recliners. The unit i

Ergostand

The Ergostand is a standing transfer aid designed to be used by individuals with balance, lower extremity, mobility, and severe physical disabilities. The Ergostand can be used to dress, clean and transfer individuals in need of additional support. The individual is supported by a band sling with a Velcro waist enclosure reinforced with two belts. A back support, a padded knee support and an anti-slip foot base ensure safety. Control of start and stop, motorized base, and 2-speed vertical moveme

Ergowave Intersegmental Table

The ErgoWave Intersegmental Table is a powered traction table designed for clinical use. This table covers all areas of the patient's spine with intersegmental traction every 13 seconds, while the ErgoWave roller pattern travels up the spine. Features include a welded steel frame, height-adjustable rollers, and a built-in storage shelf in the base. OPTIONS: Leg bolster pillow, head pillow, treatment mat, and a nose hole option. DIMENSIONS (HxWxL): 24 x 25 x 78 inches. The treatment area is 25 in

Etac Cross Xl Wheelchair

The Etac Cross XL Wheelchair is a heavy-duty adult folding wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. Adjustments that do not require tools can be made with one hand. FRAME: Aluminum and steel tube folding frame with twin cross-tubes, in a choice of regular or long frame. Push-handles are height-adjustable with tools and removable. Anti-tips are included. Color options are black, blue, sea green, or plum. SEAT (L

Etac Fresh Bathboard

The Etac FRESH Bathboard is a bathboard designed for use by individuals with balance, mobility, or lower extremity disabilities. This bathboard has a wide end for support when transferring to and from the tub, and a narrower mid-section which allows ease of access for hygiene. This seat has four friction linings, which keep the bathboard securely on the bathtub. This Latex-free plastic board has a slip-resistant dimpled surface and a support handle, is corrosion-resistant, and is designed to be

Evac+Chair 300H (Model Mk-4)

The Evac+Chair 300H, model MK-4, is an emergency evacuation carrier that allows one non-disabled person to move a seated individual with lower extremity, mobility, and neurological disabilities, or spinal cord injury. It uses a combination of wheels and track belts to move the person down multiple flights of stairs and across landings to exit a building. This chair pivots in its own width for tight landing turns. It has an aluminum alloy frame with a handle located in the rear above the passenge

Evac+Chair 600H

The Evac+Chair 600H is an emergency evacuation carrier that allows two non-disabled people, one in the rear of the chair and one in front, to move a seated individual with lower extremity, mobility, and neurological disabilities, or spinal cord injury. It uses a combination of wheels and track belts to move the person down multiple flights of stairs and across landings to exit a building. This chair pivots in its own width for tight landing turns. It has an aluminum alloy frame with two rear ha

Evacupod Overlay (Models Evp 1 & Evp 100)

The Evacupod Overlay, models EVP 1 and EVP 100, is an emergency evacuation system that serves as a foam mattress overlay when not in use. The Evacupod Overlay is made of pressure-relieving, visco-elestic memory foam covered by quilted, 4-way stretch antimicrobial sheeting. It attaches to the mattress of a standard hospital bed with four elastic straps that fit over the mattress corners. In case of emergency, the Evacupod Overlay is detached from the mattress and secured around the user using thr

Evacupod Wall Unit (Models Evp 2 & Evp 200)

The Evacupod Wall Unit, models EVP 2 and EVP 200, is an emergency evacuation system designed for individuals with mobility disabilities and spinal cord injury. This rectangular is inflated, and the user lays on it. Three patient retainer straps fasten at the user's chest, hips and shins to secure the user on the mat. When the straps are tightened, the inflated mat wraps around the user so that the user is protected from impacts on the bottom and sides. There are eight lifting straps on each side

Evo

The eVO is a motor assisted stationary therapy bicycle exerciser that provides reciprocating full-body motion to people who have little or no voluntary movement abilities due to neurological or physical disabilities. The eVO's motor-assisted handlebars move the upper body while the foot pedals move the lower extremities simultaneously in an interlinked "cross-patterning" manner. The intelligent motor in the eVO can be used in a Continuous Passive Motion, moving the user when they are unable to d

Excel Extra-Wide Wheelchair (Models Mds806400, Mds806450, Mds806700, Mds806750, Mds806700Fla, Mds806750Fla, Mds806800, Mds806850, Mds806800Fla, Mds806850Fla, Mds806900, & Mds806950)

The Excel Extra-Wide Wheelchair is a heavy-duty manual wheelchair designed for use by individuals with mobility disabilities. FRAME: Carbon steel frame with chip-resistant chrome plating. SEAT: 20 inches wide (models MDS806400, MDS806450, MDS806700, MDS806750, MDS806700FLA, and MDS806750FLA), 22 inches wide (models MDS806800, MDS806850, MDS806800FLA, and MDS806850FLA), or 24 inches wide (models MDS806900 and MDS806950). UPHOLSTERY: Black on 300 pound capacity models or navy blue on all other mod

Excel Recliner (Models Mds808350, Mds808450, Mds808550 & Mds808650)

The Excel Recliner is a manual reclining wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This wheelchair provides full back and headrest support as the user reclines from 90 to 160 degrees. FRAME: Chip-resistant chrome-plated carbon steel frame with dual axle, dual sealed precision bearings, and anti-tippers. SEAT (DxW): 17 x 16 inches (model MDS808350); 17 x 18 inches (model MDS808450); 17 x 20 inches (model MDS808550); or 17 x 22 inches (model MDS80

Excelerator Handcycle

The Excelerator Handcycle is a hand propelled cycle for adults with mobility or lower extremity disabilities or spinal cord injury. Capable of reaching speeds up to 30 miles per hour (mph), this three-wheeled, hand-crank cycle features stable maneuverability and is a way to exercise or cross-train. Super-7 shifters are positioned for easy accessibility and the Sachs Super-7 hub, with reverse braking, lets the user back up without taking his/her hands off the handles to stop or find a neutral zo

Extra Wide Bedside Steel Commode

The Extra Wide Bedside Steel Commode is a height-adjustable commode designed for use by individuals with severe physical disabilities. This commode's heavy-duty welded construction offers more space between the arms and higher seat adjustments than standard commodes. It is equipped with skid-resistant rubber tips and a commode pail with a lid. The pail capacity is nine quarts DIMENSIONS (HxDxW): 27.5 x 22.5 x 27 inches. The width between the arms is 23 inches. The seat height adjusts form 19.5

Ez Pool Lift

The EZ Pool Lift is a manual hydraulic pool lift designed for use by individuals with spinal cord injury, lower extremity disabilities, or severe physical disabilities. It is portable for storage and/or relocation to another pool area. Stainless steel construction and a UV resistant powder coat finish ensure corrosion resistance. Other features include adjustable sling chains, a durable, adjustable mesh sling-style seat, a concrete-imbedded anchor system, and 360-degree manual rotation. OPTIONS:

Fairview

The Fairview is a seat lift recliner chair designed for use by individuals with mobility disabilities. This motorized chair has a hardwood frame; a welded steel base; heavy-gauge, no-sag steel springs in the seat and back; dacron fibers in the arms, back, and chaise for shape retention; and a cushioned seat for comfort and support. Covered in acrylic, polyester, and Olefin fabric, this chair also features traditional styling with a tufted chair back design, arm covers, and a magazine pocket on t

Fawssit Foldaway Wheelchair Shower (Models S2000, Ss4040, R3000, T4000, & B5000)

The FAWSsit Foldaway Wheelchair Shower is a portable shower designed for use by individuals who use wheelchairs. This self-contained portable shower stall can be used anywhere there is access to warm water, a drain and an electric outlet. The unit comes completely assembled and no tools are required for set up. The unit has a nylon mesh embedded double-layer vinyl drain pan. The custom design allows for maximum water removal and Velcro strips to hold sides in place. The front folds down for whee

Flex-A-Bed Hi-Lo Series Adjustable Bed (Series 185)

The Flex-A-Bed Hi-Lo Series Adjustable Bed, series 185, is a motorized bed designed for use by individuals with mobility, respiratory, digestive, or severe physical disabilities or spinal cord injury. This bed enables the user to raise the head and feet independently or simultaneously, and the bed height is adjustable. Features include a choice of a wired or wireless hand-operated pendant control; an innerspring mattress in a choice of soft, medium, or firm; a high-density foam foundation; and r

Flex-A-Bed Premier Adjustable Bed (Model 790)

The Flex-A-Bed Premier Adjustable Bed, model 790, is a motorized bed designed for use by individuals with mobility, respiratory, digestive, or severe physical disabilities or spinal cord injury. This bed enables the user to raise the head and feet independently or simultaneously. Features include a choice of a wired or wireless hand-operated pendant control; wood trim panels over metal frame and the mattress retainer at the foot of the bed; an innerspring mattress in a choice of soft, medium, or

Flex-A-Bed Value-Flex Adjustable Bed (Model 158)

The Flex-A-Bed Value-Flex Adjustable Bed, model 158, is a motorized bed designed for use by individuals with mobility, respiratory, digestive, or severe physical disabilities or spinal cord injury. This bed enables the user to raise the head and feet independently or simultaneously. Features include a hand-operated pendant control; mattress retainer at the foot of the bed; an innerspring mattress in a choice of soft, medium, or firm; locking casters; Bioguard treatment of mattress fabrics to inh

Fleximove (Models 4011, 4012, & 4016)

The Fleximove, models 4011, 4012, and 4016, is a transfer aid designed for turning, positioning or transferring an individual with mobility disabilities. A padded board with handles and an inner surface of polyester, the unit can be used for moving patients further up in bed, turning over, sideways transfers, or when a patient must be lifted from the floor after falling. Models 4011 and 4012 consist of four handles; model 4016 consists of six handles. DIMENSIONS (LxW): 102 x 43 centimeters (4011

Focus (Model 818)

The Focus, model 818, is an adult wheelchair designed for use by individuals with mobility or severe physical disabilities. FRAME: The adjustable modular frame has an overall width of 26 5/16 inches. The frame sdjusts from 15.5 to 19 inches. The push handles adjust from 38 3/16 to 41 7/8 inches high. Adjustable anti-tips adjust to five different heights in 3/16-inch increments. SEAT: The seat height adjusts from 15 3/8 to 20 inches. Built-in seat extenders provide support for an extended seat.Th

Fold-Up Shower Seat (Model 02210P & 02010P)

The Fold-Up Shower Seat is a folding shower seat designed for use by individuals with mobility, lower extremity, or balance disabilities or arthritis. Designed for showering in a small space, this compact wall-mounted, height-adjustable seat has an aluminum frame and legs with rubber tips and a polypropylene molded seat with drainage holes. The removable seat cushion is made of soft feel closed-cell polyurethane foam. When not in use, the seat folds up against the wall. DIMENSIONS (HxW): 19.5 to

Fold-Up Shower Seat (Models 02200P & 02000P)

The Fold-Up Shower Seat is a folding shower seat designed for use by individuals with mobility, lower extremity, or balance disabilities or arthritis. Designed for showering in a small space, this compact wall-mounted, height-adjustable seat has an aluminum frame and legs with rubber tips and a polypropylene molded seat with drainage holes. The removable seat cushion is made of soft feel closed-cell polyurethane foam. When not in use, the seat folds up against the wall. DIMENSIONS (HxW): 18.75 t

Folding Parallel Bars (Model 1319)

Folding Parallel Bars, model 1319, are parallel bars designed for use by individuals with lower extremity or walking disabilities or who have had a stroke. The unit has heavy-gauge steel base plates, uprights, and fittings with a powder coated finish. The one-piece handrails are stainless steel. Each upright telescopes and locks into a choice of nine height positions with a fail-safe ball-tip locking pin. The unit folds for storage. DIMENSIONS (HxLxW): 28 to 41 inches x 9 feet x 25 inches. The u

Folding Shower Seat (Models B-517 & B-518 )

The Folding Shower Seat, models B-517 and B-518, is a wall-mounted folding shower seat designed for use by people with balance, lower extremity or mobility disabilities. It has a stainless steel tubular frame and mounting brackets, and it features a self-locking mechanism. The seat is L-shaped and is foam-padded, water-resistant naugahyde seat with an enclosed plywood base. DIMENSIONS: Seat is 32.875 inches wide and 1.5 inches thick; when extended, it projects 22.6875 inches from the wall. CAPA

Folding Shower Seat (Models B-5181 & B-5191)

The Folding Shower Seat, models B-5181 and B-5191, is a wall-mounted folding shower seat designed for use by people with balance, lower extremity or mobility disabilities. It has a stainless steel tubular frame and mounting brackets, and it features a self-locking mechanism. The seat is available in an L-shape (model B-5181) or rectangular shape (B-5191). The seat is constructed of durable, water-resistant solid phenolic with slats for drainage. DIMENSIONS: Seat is 33 inches (model B-5181) or 18

Free Spirit Knee & Leg Walker

The Free Spirit Knee & Leg Walker is a knee walker designed for use by individuals with lower extremity disabilities. Intended for use by individuals who cannot bear weight on the foot or ankle or who have had an amputation, the unit features a height-adjustable folding aluminum frame and a padded platform to support the knee, shin, and ankle of the disabled leg, while allowing the remaining leg to be used freely. Other features include four large wheels with flat-free rubber tires, handleba

Freedom Ada Pool Lift

The Freedom ADA Pool Lift is a pool lift designed for use by individuals with mobility disabilities or spinal cord injury. This lift provides autonomy for the recreation facility patron who may experience difficulty entering or exiting a swimming pool. This lift can be used with an in-ground of above-ground pool, including pools with a minimum deck to pool water length of 12 inches. The Freedom lift will accommodate anchor locations ranging from 6 to 22 inches from the pool wall. The frame is ma

Friendly Bed System (Model Fb)

The Friendly Bed System, model FB, is a bed mobility, transfer and positioning aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. The system has a steel framework that fits queen, double, and twin conventional beds. The frame has two end pieces that are placed beyond a bed’s headboard and footboard (or end if the bed does not have a footb

Frontier Mwd All Terrain Wheelchair

The Frontier MWD All-Terrain Wheelchair is a sport wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. This wheelchair is designed for off-road use. FRAME (LxW): 905 millimeter overall length x 710 millimeter base width. The frame has six-wheel articulating suspension. CONTROLS: DX2 High dynamic controls. MWD: Mid-wheel drive. SEAT (LxW): 16, 19, or 20 x 16, 18, or 20 inches; larger sizes are also available. Available s

Fully Adjustable Bronze Finish Aluminum Cane With An Explorer Handle

The Fully Adjustable Bronze Finish Aluminum Cane is an adjustable cane designed for individuals with mobility disabilities. This heavy-duty aluminum cane has a contoured Explorer Handle. DIMENSIONS: The cane height adjusts from 29 to 38 inches. CAPACITY: 350 pounds. COLOR: Bronze shaft.

Gaitkeeper Rehab Treadmill (Models 1800T & 2000T)

The GaitKeeper Rehab Treadmill is a treadmill exerciser designed for use by individuals with mobility or walking disabilities during rehabilitation and ambulation training. This high-torque treadmill has a 3-horsepower motor that can move the user at speeds as slow as 0.1 mile per hour. The control panel is movable to be within reach of the clinician. Distance readout is in feet for accurate charting of progress. The treadmill has adjustable inclines.OPTIONS: 14-inch platform for both models. DI

Gallatin Water Powered Assisted Access Lift

The Gallatin Water Powered Assisted Access Lift, is a swimming pool lift designed for use by individual with lower extremity, mobility, or severe physical disabilities or spinal cord injury. This lift lift is designed for use on the decks of in-ground and above-ground pools and spas without customization and has dual anchor points. The base stand accommodates a wide range of gutter configurations and has a design that provides high loading capacity with minimal deflection. The base stand has bu

Garaventa Evacu-Trac (Model Cd7)

The Garaventa Evacu-Trac, model CD7, is an attendant operated emergency evacuation carrier designed to transport wheelchair users down stairs to safety during situations when building elevators cannot be used. This folding evacuation chair consists of a metal frame with six auxilliary wheels to allow it to move on flat surfaces and to pivot for negotiation on small stair landings, two rubber tracks to grip the stairs, and a sling-seat with adjustable safety belts with quick connecting Velcro str

Gatekeeper, The

The Gatekeeper is a straight cane designed for use by individuals with balance or walking disabilities. Machined from aluminum, this cane has a skull handle and a bone-shaped shaft. A rubber tip and wrist strap are included. OPTIONS: Fritz handle or sphere handle. DIMENSIONS: Available from 29 to 38 inches long in half-inch increments. CAPACITY: 350 pounds. COLOR: The shaft is gloss black with brushed aluminum sides. The standard skull handle is polished black; satin or polished aluminum finish

Gimme A Lift

Gimme a Lift is a transfer aid designed for use by individuals with balance or lower extremity disabilities who are able to bear weight or are ambulatory. Designed for use in home, work, or institutional health care settings, this device can be used unattended by the individual or with the assistance of a care giver. The unit lifts and lowers individuals to stand up, sit down, sit up, or lie down. It supports walking and transfers to walkers, chairs, and wheelchairs. In the assisted mode, a nurs

Gx4 Single Rider Golf Car

The GX4 Single Rider Golf Car is an adapted golf cart or personal electric vehicle designed for use by individuals with walking, circulatory, neurological, or balance disabilities, arthritis or limited stamina. This single rider golf cart enables the user to play golf without getting out of the cart. When the user approaches a golf ball, he or she can position the vehicle, put in it "park," and then rotate the seat and hit the ball while seated. The frame/chassis is made of welded tubular steel

Handybar

The HandyBar is a car transfer aid designed for use by individuals with arthritis, balance, or mobility disabilities. Made of forged steel with an ergonomic foam-cushioned handle, this device fits in the U-shaped door striker of most cars to create a handle for extra leverege to aide in getting out of a car. The device can also be used to break automobile windows or cut seat belts in the event of an emergency. CAPACITY: 350 pounds.

Hang Ups Inversion Table

The Hang Ups Inversion Table is designed for use by individuals with back pain. This table accommodates individuals from 4 feet, 10 inches to 6 feet, 6 inches tall and features a solid, wide-based frame for stability.Other features include hip guides, footrest with securing strap, and adjustable balance settings. The unit inverts when the user raises his or her arms above his/her head. The frame folds flat for storage and transport. A video and instruction book are included. DIMENSIONS (HxWxD):

Hausted All Purpose Chair Hydraulic Series (Models Apc-150-St & Apc-250 St)

The Hausted All-Purpose Chair Hydraulic APC Series is a stretcher wheelchair and transport wheelchair designed for use by individuals with mobility disabilities. This height-adjustable chair can be adjusted from a sitting position to a supine position, and is designed for use in a medical setting for transport and treatment. APC-150-ST has simultaneous foot section and backrest action, and APC-250-ST has either simultaneous or independent foot section and backrest action. Both models have a push

Hausted Electric Powered All Purpose Chair (Model Epc-250-St)

The Hausted Electric Powered All Purpose Chair, model EPC-250-ST, is a stretcher wheelchair and transport wheelchair designed for use by individuals with mobility disabilities. This chair is designed for use in a medical setting for transport and treatment. Features include a push bar, a built-in chart holder, and accessory wells on each side. FRAME (HxLxW): 23.5 to 31.5 x 75 x 27.75 inches. CONTROLS: This chair has electric controls for height, back support, leg section, and Trendelenburg adju

Hd3 Corpus

The HD3 Corpus is a heavy duty powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 40.5 x 28 inches (base only). The minimum length for transport of the base is 36.25 inches. Minimum turning radius is 28 inches. The HD3 Corpus has a ground clearance of 3 inches and 4-wheel adjustable independent suspension. The base frame is available in black. Front anti-tippers, front lights and side and rear reflectors

Heartway Frontier Pf1 4 Wheel Power Scooter

The Heartway Frontier PF1 4 Wheel Power Scooter is a 4-wheeled heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include front basket, headlight, directional signals, and rear view mirror. FRAME (LxW): 56.3 x 25.2 inches. Rear anti-tippers are standard.C ONTROLS: Dynamic Rhino 110-amp controller with multi-function ajustable tiller and handle bars. SEAT: 18- to 22-inch swivel captain's seat. UPHOLSTERY: Contoured, padded vinyl seat. ARMRESTS

Heartway Frontier Pf1S 4 Wheel Power Scooter

The Heartway Frontier PF1S 4 Wheel Power Scooter is a 4-wheeled heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include front basket, headlight, directional signals, and a rear view mirror. FRAME (LxW): 56.3 x 25.2 inches. The scooter is equipped with a rear anti-tipper wheel and it disassembles for transport or storage. CONTROLS: Dynamic Rhino 110-amp, multi-function display, adjustable tiller, and handle bars. SEAT: 18- to 22-inch rotati

Heartway Mystere 4 Wheel Power Scooter (Model Pf5)

The Heartway Mystere 4-Wheel Power Scooter, model PF5, is a four-wheeled heavy-duty scooter designed for use by individuals with mobility disabilities and seniors. Standard features include a front basket, headlight, and rear view mirror. FRAME (LxW): 56.7 x 24.8 inches. CONTROLS: Rhino 110 amp comtroller with adjustable-angle tiller and digital controls. SEAT: 18- to 22-inch highback captain's seat with headrest. The seat has dual direction and rotation capability. UPHOLSTERY: Contoured, padde

Heat And Massage Lift Chair (Model 70557)

The Heat and Massage Lift Chair, model 70557, is a recliner chair designed to assist individuals with mobility disabilities in rising to a standing position. This electric chair has three reclining positions, a lift mechanism to bring the user smoothly to a standing position, heat and gentle vibrating massage, hand-held controls, and a choice of velvet fabric or vinyl upholstery. It has a single motor with a built in emergency battery back-up, allowing the chair to return to sitting position in

Heavy Duty Patient Lift (Model Bcwlift)

The Heavy Duty Patient Lift, model BCW750TC, is a powered transfer lift designed to assist in transfering obese patients who have physical disabilities. This lift enables a caregiver to safely and easily lift and move a patient along an overhead track to a bed, chair, bath or commode. It is a powered lift with a transfer device to move the sling along and overhead track to the desired location. The lift track is made of aluminum alloy for lightweight, strength, and durability, and features a dou

Heavy Duty Stainless Steel Aquatic Wheelchair

The Heavy Duty Stainless Steel Aquatic Wheeelchair is a pool wheelchair designed for use by individuals with mobility disabilities. This chair is suitable for daily immersion and use in a pool environment. FRAME: Stainless steel folding frame with double cross bracing. SEAT: 16, 18, or 20 inches wide. UPHOLSTERY: Mildew resistant PVC mesh. ARMRESTS: Flip-up armrests. CAPACITY: 350 pounds.

Heavy-Duty Plastic Fluted Grab Bars

The Heavy-Duty Plastic Fluted Grab Bars are grab bars designed for use by individuals with lower extremity, mobility, or balance disabilities or arthritis. These bariatric grab bars are reinforced with an aluminum tubular core for greater strength. The plastic fluted surface provides additional grip and provides assistance in preventing accidental slipping. DIMENSIONS: 12, 16, 18, 24, or 32 inches long x 1.25 inches in diameter. CAPACITY: 385 pounds. COLOR: White or blue.

Heavy-Duty Tub Bench With Commode Cutout (Model Ig-9670C)

The Heavy Duty Tub Bench with Commode Cut Out, model IG-9670C, is a bath seat and shower commode designed for use by individuals with mobility disabilities. It features a textured, non-slip seat with commode cut-out, handles, hand-held shower holders, and a shower curtain opening molded into bench. An ergonomically- shaped reversible backrest accommodates right- or left-side transfers. The seat has Microban protection which inhibits the growth of odor- and stain-causing bacteria, mold, and milde

Height Adjustable Treatment Table (Model 852)

The Height-Adjustable Treatment Table, model 852, is a height adjustable treatment table designed for use in therapy. The table has hydraulic cylinders on all four legs to raise the table top. It also has non-skid adjustable feet, a powder-coated steel frame, and vinyl upholstery. OPTIONS: Storage shelf (model 852S). DIMENSIONS (HxLxW): 25 to 34 x 72 x 28 inches. CAPACITY: 400 pounds. WEIGHT: 174 pounds. COLOR: The upholstery is available in a choice of eleven standard colors and eleven optional

Hi-Riser

Hi-riser is an electrically operated wall mounted changing table that is suitable for children and adults of up to 440lbs. Despite being extremely robust, the Hi-riser offers a slimline design that ensures it fits easily into most environments. The Hi-riser comes in a choice of powder coated frame for dry rooms and stainless steel frame for wet-rooms. Additional features include: wall and floor mount, unique stowaway side rail and compatibility with a wide number of hoists. It is also equipp

Hm50 Series Ceiling Track System (Models Hm50, Hm50Rc, Hm50L, & Hm50Lrc)

The HM50 Series Ceiling Track System is a powered overhead transfer lift designed for use by individuals with mobility or neurological disabilities or spinal cord injury. This system enables users to transfer from bed to wheelchair, toilet, or bath, using a motorized lift and either manual or motorized lateral movement along a ceiling track. All models are powered vertically. Models HM50L and HM50LRC are also powered laterally to enable self-lifting and transfer. Models HM50 and HM50RC allow use

Holeshot, The

The Holeshot is a straight cane designed for use by individuals with balance or walking disabilities. Machined from aluminum, this cane comes wih a choice of a skull handle or a Fritz handle and a shaft intermittently machined through to the highly polished aluminum to represent the holes in a folding stock sub- machine gun, commonly used by gangsters in the 1930's. A rubber tip and wrist strap are included. DIMENSIONS: Available from 29 to 38 inches long in half-inch increments. CAPACITY: 350 p

Homecraft Savanah Raised Toilet Seat With Frame

The Homecraft Savanah Raised Toilet Seat with Frame is a molded elevated toilet seat with a built-in safety frame designed for use by individuals with arthritis or mobility or balance disabilities. The molded seat is affixed to a sturdy, height-adjustable steel frame with arm rests and molded-rubber slip-resistant feet. The seat is available with or without a lid. The unit fits over most standard toilets. DIMENSIONS: The unit adjusts from 20.5 to 24.75 inches high and is 21 inches wide between a

Hoyer Hydraulic Patient Lift (Model C Hla)

Hydraulic jack patient lifter, U shape base adjusts in width for narrow doorways or halls, 24 to 34 inches. Guide bars to assist with steering. 400 pounds maximum capacity. Weight 68 pounds.

Hoyer Lifter (Model C-Hla-112-C)

Lift with adjustable base for entering and exiting automobile or bed. 1 piece canvas sling back and seat combination attaches to base bar with chains and straight metal bar. Base width adjusts from 23 to 30 1/2 inches. Foot brakes on 2 casters. Maximum capacity is 400 pounds. Portable, boom and jack separate from base. Must be operated by attendant or companion. Mechanical hand crank or power control can be retrofit. Base needs 6 1/2 inches clearance under beds or cars.

Hugn-Go (Models 100, 200 & 350)

The HugN-Go, models 100, 200 and 350, is a walker with an incorporated sit to stand lift designed for use by individuals with lower extremity, mobility, or walking disabilities. This walker can lift a user from a sitting to standing position and and then provides support as the user walks. The lift mechanism is controlled with a handheld pendant. The unit's integrated sit-to-stand lift can help the user to move in and out of a chair or wheelchair, on and off the toilet, from a seated position on

Hurricane (Model Pmv5001)

The Hurricane, model PMV5001, is an all-terrain four-wheeled scooter designed for outdoor use by people with physical disabilities or limited mobility. Standard features include a fully- directional light package, a rear view mirror, and a front basket. FRAME (LxW): 52 x 24 inches with a turning radius of 65 inches. The wheel base is 37 inches. The ground clearance is 4 inches. Rear anti-tips are included. The scooter disassembles without tools into seven pieces for transport and storage. The bo

Hydraulic Patient Lift (Models 9901 & 9902)

Hydraulic jack lifter, mast with adjustable width base. For attendant use. Variety of 1 and 2 piece slings available. Capacity 400 pounds. Base adjusts from 22 to 40 inches wide. Shifter handle for adjusting legs. Low offset base available, 6 inch clearance. Nonadjustable base available. Mast can also be used with tub saddle. Can be used for car transfer. Slings not included. Model 9917 with C base.

I-Class Heavy-Duty Transfer Bench

The I-Class Heavy-duty Transfer Bench is designed for use by individuals with mobility disabilities while bathing. This height-adjustable bench has an anodized aluminum frame with nine height adjustments in one-half-inch increments; non-slip, non-marring rubber tips; a shower curtain opening; built-in soap dish and hand-held shower holder; and an aluminum arm rail. The one-piece blow-molded seat is textured for a non-slip finish and has drain holes. The molded, ergonomically-shaped backrest snap

Ibex Tran-Seat 700H

The IBEX Tran-Seat 700H is an emergency evacuation carrier that allows two non-disabled people, one in the rear of the chair and one in front, to move a seated individual with lower extremity, mobility, and neurological disabilities, or spinal cord injury. It uses a combination of wheels and belted treads to move the person down multiple flights of stairs and across landings to exit a building. The treads work with an adjustable pressure brake to allow the chair to be eased down stairs creating

Impulse Foot

The Impulse Foot is a prosthetic foot designed for use by individuals with lower extremity amputation. The foot consists of a composite foot plate attached to a recessed Kevlar/nylon keel, and can be used for endoskeletal, exoskeletal, or Symes applications. It is available with five levels of toe resistance (very low, low, regular, high, or very high), and comes with a shaped foam ankle and three heel inserts (one each with soft, medium, and firm density). OPTIONS: Titanium foot pyramid; multia

Invacare 3G Ranger X Rwd

The Invacare 3G Ranger X RWD is a reclining powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 28.5 to 31.5 x 25 inches. The frame is equipped with rear independent suspension and is available in a choice of 21 colors. A transport-ready option is available. CONTROLS: MKIV-A controller with switch options. RWD: Rear wheel drive. SEAT (LxW): 12 to 22 x 12 to 22 inches. The floor-to-seat height is adjustable to 17.5, 19.5 or 21 inches.

Invacare 3G Torque Wp Rwd Power Chair

The Invacare 3G Torque SP RWD is a power wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 28.5 to 31.5 x 12 to 24 inches. Minimum turning radius is 31.9 inches. CONTROLS: MKIV RII (standard) or MKIV-A with switch options. RWD: Rear wheel drive with a 4-pole motor is standard; a GB motor with TrueTrack is optional. SEAT (LxW): 12 to 20 x 12 to 20 inches. The floor-to-seat height is 17.5 to 21 inches. Seating options include tilt, recline,

Invacare 9000 Xdt

The Invacare 9000 XDT is a manual adult wheelchair designed for use by tall and/or heavy individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with crossbraces in a variety of colors. Push handles are standard. The frame is available in tall, standard adult, and hemi. The standard frame color is chrome; cobalt blue, red, black, or silver vein are optional. SEAT: The seat is available in a choice of 16, 18, 20, or 22 inches wide. The standard seat depth is

Invacare Heavy Duty Walker (Model 6291-Hda)

The Invacare Heavy Duty Walker, model 6291-HDA, is a folding adjustable walker designed for use by heavy adults with mobility disabilities. These lighter weight walkers feature composite lower side braces for stability, anti-rattle sliencers, PVC hand grips, and rubber tips on the legs. The dual locking mechanism features nylon paddle locks which pop up when the walker is opened; pressing down on each paddle enables the corresponding side to be folded. This walker accommodates adults from 5 feet

Invacare Tracer Iv

The Invacare Tracer IV is a heavy-duty manual adult wheelchair designed for use by heavy individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with dual crossbraces. The reinforced frame includes gussetted side frame and caster journals. Push handles are standard. SEAT: Sling seat in a choice of 20, 22, or 24 inches wide. The seat depth is 18 inches. The seat-to-floor height is 21 inches. The fixed back height is 16 inches. UPHOLSTERY: Flame-retardant du

Invisia Accent Ring

The Invisia Accent Ring is a curved wall grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. This stainless steel bar forms a three-quarter circle and is contoured to fit around circular shower and bathtub control fixtures. This unit has concealed mounting screws and multiple points of contact with the wall. CAPACITY: 350 pounds. COLOR: Brushed nickel or triple-plated chrome

Invisia Corner Shelf

The Invisia Corner Shelf is a corner shelf for shower with wall grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. This unit comprises a triangular Dupont Corian shelf with a curved stainless steel grab bar in front. This unit has concealed mounting screws and two points of contact with the wall. CAPACITY: 350 pounds. COLOR: Brushed nickel or triple-plated chrome.

Invisia Soap Dish With Integrated Safety Rail Grab Bar

The Invisia Soap Dish with Integrated Bath Safety Rail Grab Bar is a soap holder with wall grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. This unit comprises a removable round Dupont Corian soap dish surrounded by a circular stainless steel grab bar. This unit has concealed mounting screws and three points of contact with the wall. CAPACITY: 350 pounds. COLOR: White powdercoat, brushed nickel, or triple-plated chrome.

Invisia Toilet Roll Holder

The Invisia Toilet Roll Holder is a toilet paper roll holder with wall grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. This unit comprises an inverted horseshoe shaped stainless steel grab bar with a toilet paper holder and two Dupont Corian shelves for storing extra tissue rolls and other items. This unit has concealed mounting screws and multiple points of contact with the wall. CAPACITY: 350 pounds. COLOR: White powdercoat, brushed nickel, or

Invisia Towel Bar With Integrated Safety Rail / Grab Bar

The Invisia Towel Bar with Integrated Grab Bar/Safety Rail is a towel bar with grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. Made of stainless steel, this unit comprises a towel bar suspended below a curved grab bar. For maximum support, these bars have three points of contact with the wall. DIMENSIONS: 16 or 24 inches long. CAPACITY: 350 pounds. COLOR: White powdercoat, brushed nickel, or triple-plated chrome.

Ivy Rose

The Ivy Rose is a straight cane designed for use by individuals with balance or walking disabilities. Machined from aluminum, this cane has a Fritz handle and the end of the handle facing away from the user features rose and vine image. Intricately engraved roses and vines climb up the shaft. A rubber tip and wrist strap are included. OPTIONS: Skull or sphere handle. DIMENSIONS: Available from 29 to 38 inches long in half-inch increments. CAPACITY: 350 pounds. COLOR: The shaft and handle are can

J6 (Models 2S-C, 2S-Ss & 2Sp-Ss)

The J6, models 2S-C, 2S-SS and 2SP-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 34.5 x 23.25 inches with a 2.25-inch ground clearance and a 21.25-inch turning radius. This wheelchair has Active-Trac (ATX) suspension and a non-folding frame. The chair is available in red and blue. CONTROLS: 75 amp Q-Logic NE joystick controller is standards; other controllers are available. MWD:

Janell, The

The Janell is a straight cane designed for use by individuals with balance or walking disabilities. Machined from aluminum, The upper shaft has engraved and shooting stars set in a transparent candy background. The lower shaft is a tapered, highly polished, high-grade aluminum. The handle is a sphere again in transparent candy with a star artfully machined in the top. A rubber tip and wrist strap are included. OPTIONS: Fritz handle or skull handle. DIMENSIONS: Available from 29 to 38 inches lon

Km-5000-TP Reclining Transport Wheelchair

The KM-5000TP is a lightweight folding transport wheelchair with reclining back designed for use by adults with lower extremity or mobility or spinal cord injury. FRAME (HxW): 51 x (25, 27, 29 or 31) inches. The folding frame is constructed of 6061 T-6 aircraft-grade aluminum, and it is finished in black powder coat. Anti-tippers are standard. SEAT (WxD): (16, 18, 20 or 22) x 18 inches. Seat to floor height is 20 inches. The back height is 33 inches with an adjustable-height head pillow. The fol

Landeez All-Terrain Wheelchair

The Landeez All-Terrain Wheelchair is a beach, snow, and sport wheelchair designed to enable individuals with mobility disabilities to enjoy outdoor recreation in a variety of environments. FRAME: Welded stainless steel frame with push handles disassembles without tools and folds for storage and transport. SEAT: Sling seat and back. The seat is 19 inches high. A seatbelt is included. UPHOLSTERY: Removable, washable nylon mesh upholstery. ARMRESTS: The padded teakwood armrests swivel up and out

Lexa Lift & Lexa 600

The Lexa Lift and the Lexa 600 are powered transfer lifts designed for use with individuals with mobility disabilities. These lifts adapt to a variety of transfer needs, from bed and floor to bath, commode, wheelchair, and more. The electronic patient positioner adjusts the user to a range of positions from fully lying down to sitting. Both models feature a manual or electrically width-adjustable U-shaped base with four heavy-duty ball bearing caster wheels, two with parking brakes for added sta

Lift'n'go (Model 210)

The Lift'N'Go, model 210, is a hitch-mounted wheelchair carrier designed for use by individuals with mobility disabilities or spinal cord injury. This electrically-powered universal carrier can be used to transport scooters and wheelchairs, including heavy scooters and mid-wheel drive chairs. It has a carrying platform with five tie-down locations and three nylon straps to secure the chair or scooter during transport. There is a backup hand crank with a stroke lift of 22 inches. The carrier requ

Litegait I (Models 260E & 360E)

The LiteGait I, models 260E and 360E, is a suspension ambulation aid and gait trainer designed for use with individuals with balance, lower extremity, neurological, or walking disabilities. This device is intended to enable therapists to safely train individuals in posture, gait, balance, and the use of assistive ambulation devices such as canes, crutches, and walkers. This unit enables the user to progress from partial to full weight bearing and may be used over ground or with treadmills. The u

Litegait I (Models 400E & 400Es)

The LiteGait I, models 400E and 400ES, is a suspension ambulation aid and gait trainer designed for use with individuals with balance, lower extremity, neurological, or walking disabilities. This device is intended to enable therapists to safely train individuals in posture, gait, balance, and the use of assistive ambulation devices such as canes, crutches, and walkers. This unit enables the user to progress from partial to full weight bearing and may be used over ground or with treadmills. The

Lma Regal Heavy Duty Rolling Walker (Model 850)

The LMA Regal Heavy Duty Rolling Walker, model 850, is a heavy-duty, height-adjustable wheeled walker with seat designed for use by individuals with arthritis, lower extremity disabilities, or walking disabilities. OPTIONS: Folding Basket. DIMENSIONS(DxWxH): The seat is 15 x 25 x 21 inches. The walker height adjusts from 34 to 40 inches. The wheel are 8 inches in diameter. WEIGHT: 30 pounds. CAPACITY: 400 pounds. COLORS: Red or blue.

Ls400 Toilet Lift

The LS400 Toilet Lift is a portable toilet seat lift and commode with seat lift designed for use by individuals with lower extremity or mobility disabilities. The unit can be wheeled from room to room and bedside to bathroom with its ergonomic rear push bar for use as a power bedside commode or over-the-toilet motorized lift. During toilet transfer, it reduces the physical force required by caregivers to help users on and off the toilet. The LS400 can be configured as a height-adjustable toilet

Lumex Walkabout Lite Rollator & Lumex Walkabout Wide Rollator

The Lumex Walkabout Lite Rollator and the Lumex Walkabout Wide Rollator are folding wheeled walkers with seats designed for use by individuals with balance, lower extremity, or walking disabilities or arthritis. These four-wheeled rollators have lightweight folding aluminum frames; ergonomic height-adjustable handgrips; a wide, padded flip-up seat with a folding strap underneath; locking, quick stop loop brakes; removable padded back rest bar with easy release pull knobs; reflectors; and a stora

Mechanical Wheelchair Floor Hugger (Model 495 4951)

The Mechanical Wheelchair Floor Hugger, model 495 4951, is a wheelchair scale designed to accommodate wheelchair users without requiring transfers. This mechanical scale features a die cast, dual-sided, eye-level beam calibrated in .25-pound or .1 kilogram increments. The unit also includes a built-in ramp and a platform with a non-skid mat designed to accommodate all wheelchair sizes. CAPACITY: 350 pounds or 140 kilograms. DIMENSIONS (LxWxH): The platform is 30 x 26 x 2 inches. WEIGHT: 140 pou

Meditek Straight Stairlift

The MediTek Straight Stairlift is a straight rail interior seat lift designed for use by individuals with balance, lower extremity, mobility and balance disabilities. The stairlift uses a steel rack and pinion drive system with a worm and wheel self-locking gearbox. It features fabricated steel chassis plate construction with extruded aluminum rail sections. The lift moves up or down at a speed of 16 feet per minute over stair angles ranging from 25 to 50 degrees, and it has an over-speed govern

Millennial Advantage Crutch, The (Models Mwd500 & Mwd1000)

The Millennial Advantage Crutch is a folding axillary crutch designed for use by individuals with walking or lower extremity disabilities. This spring-assisted ergonomic crutch features an underarm cradle, an ergonomic handgrip, and a power-assist shock-absorbing tip. These crutches fold in half for storage or transport. Model MWD500 fits persons 4 feet,6 inches tall to 5 feet, 7 inches tall and Model MWD1000 fits individuals 5 feet, 7 inches tall to 6 feet, 8 inches tall. CAPACITY: 400 pounds.

Mini Mack Walker & Mack Walker, The

The Mack and the Mini Mack Walkers are folding walkers with a seat and hand brakes designed for individuals with walking or balance disabilities. OPTIONS: Optional accessories include a tray or a pouch. DIMENSIONS: The Mini Mack has a seat height of 19 inches and a handle adjustment of 30 to 34.5 inches. The Mack has a seat height of 22.5 inches and a handle adjustment of 34.5 to 39 inches. Both walkers have a 17 x 12.5 inch seat; the width between the handles is 20 inches and the over all wid

Miniflex 500

The Miniflex 500 is a compact powered wheelchair designed for indoor use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 82 x 57 centimeters. The turning radius is 120 centimeters. CONTROLS: P&G/ Dynamics. FWD: Front wheel drive. SEAT (LxW): The anatomically-shaped seat is 46 x 46 centimeters. The backrest height is 30 centimeters, and a variety of optional headrests is available. ARMRESTS: Height- and width- adjustable armrests. WHEELS: Back wheels are joint fi

Missoula Therapy Ladder

The Missoula Therapy Ladder is a swimming pool ladder designed for use by individuals with lower extremith or balance disabilities or arthritis or seniors. Custom designed for each pool, this ladder has injection molded ABS step treads with integral non-slip surface and raised stainless steel hand rails. The unit is available with 3, 4, or 5 steps. DIMENSIONS: The steps are 22 inches wide. The handrails are 1.5 inches in diameter. The ladder has a 15-degree slope and a 10-inch rise between steps

Mjm Reclining Shower Chair (Model 193)

The MJM Shower Chair, model 193, is a reclining shower commode designed for use by individuals with mobility, balance, or neurological disabilities. The chair has a PVC plastic frame with armrests and push bar, and is equipped with an elongated open front commode seat, an elevating leg extension, and four threaded-stem casters. The backrest and leg extension are covered in water-resistant vinyl mesh upholstery. DIMENSIONS(HxWxD): 48 x 24 x 18 inches. The seat height is 21 inches and reclining s

Mjm Reclining Shower Chair (Model 194)

MJM Reclining Shower Chair, model 194, is a reclining caster shower commode designed for use by individuals with mobility, balance, or neurological disabilities. The chair has a PVC plastic frame with armrests and push bar. This chair is equipped with an elongated open front commode seat, a reclining back, and four threaded-stem casters. The backrest is covered in water-resistant vinyl mesh. DIMENSIONS(HxWxD): 48 x 24 x 18 inches. The seat height is 21 inches. The reclined back is 29 inches. The

Mjm Reclining Shower Chair (Model 196)

The MJM Reclining Shower Chair, model 196, is a caster shower commode designed for use by individuals with mobility, balance, or neurological disabilities. This model has a PVC plastic frame with arm rests and a push bar and is equipped with a padded, elevated legrest, sliding footrest, and four threaded-stem casters. The backrest is covered in water-resistant vinyl mesh upholstery. DIMENSIONS(HxWxD): 48 x 24 x 18 inches. The seat height is 21 inches and the reclined back is 29 inches. The caste

Mjm Reclining Shower Chair (Model195)

The MJM Reclining Shower Chair, model 195, is a caster shower commode designed for use by individuals with mobility, balance, or neurological disabilities. This model is equipped with a PVC plastic frame, with an elongated open-front commode seat, and folding footrest. The backrest is covered in water-resistant vinyl mesh upholstery. This chair is equipped with four threaded-stem casters. DIMENSIONS(HxWxD): 48 x 24 x 18 inches. The seat height is 21 inches and the reclined back is 29 inches. The

Mjm Shower Gurney (Model 910)

The MJM Shower Gurney, model 910, is a shower stretcher designed for use by individuals with severe physical disabilities or spinal cord injury. This shower stretcher has a three-position elevating headrest and a closed cell waterproof foam pad with a full length drain pan. Side safety railings are secured with lock pins. Drop side railings allow barrier free transferring. The stretcher has six heavy-duty treaded casters, including a middle pair as well as pairs at each end. DIMENSIONS (HxLxW):

Mjm Sling Gurney (Model 915)

The MJM Sling Gurney, model 915, is a shower stretcher designed for use by individuals with severe physical disabilities or spinal cord injury. The stretcher has a PVC frame, dual drop side rails, four locking and two non-locking threaded stem casters, and an optional pad. DIMENSIONS (HxLxW): 30 x 79 x 28 inches with safety rails down. Casters are 5 inches or 6 x 1.25 inches. CAPACITY: 350 pounds.

Mjm Wide Deluxe Shower Chair (Model 122-3)

The MJM Wide Deluxe Shower Chair, model 122-3, is a caster shower chair designed for use by individuals with mobility, balance, or neurological disabilities. This model features a PVC plastic frame with dual drop arms and sliding footrest support. The chair is also equipped with an open-front plastic toilet seat and four threaded-stem casters. The backrest is covered in water-resistant vinyl mesh upholstery. DIMENSIONS(HxWxD): 40 x 26 x 18 inches. The seat height is 21 inches. The casters are 3

Mjm Wide Walker (Model 421-3)

The MJM Wide Walker, model 421-3, is a height- adjustable non-folding wheeled walker with seat designed for use by individuals who have mobility, balance, lower extremity, walking, or neurological disabilities. The unit has a PVC frame equipped with four casters and features a padded seat with safety strap and cloth mesh backrest. An adjustable safety belt is standard. DIMENSIONS(LxWxH): 36 x 26 x 32.5 to 35.5 inches. The chair has 15 inches of walking space in front of the seat to the gate. The

Mobile Power Toilet Aid

The Mobile Power Toilet Aid is an elevated toilet seat and lift combination and caster commode designed for use by individuals with lower extremity and mobility disabilities. The device can be installed and removed from most standard and institutional toilets. It consists of a steel frame with locking casters, arm rests, a padded backrest, and an electric lift that raises the toilet seat (not included) up to 13 inches above the toilet. A single button controls up and down movement and the unit

Model 7810 Series Heavy Duty

The Monarch Series, Model 7810 Series Heavy Duty, is an adult manual wheelchair with a folding crossbrace design. This heavy duty wheel chair is designed for hospital and institutional use. The frame is made of hardened steel frame. The seat and back measurements are: overall 25 w x 36.25 h x 41.75 l, seat width 18 standard, 16 narrow and 20 wide inches adult, seat from floor 20.5 h, back from seat 15.25 h, depth of seat 16 inches. The embossed upholstery has a textilene inner lining with Britt

Moen Securelock Tub Grip (Model Dn7175)

The Moen SecureLock Tub Grip, model DN7175, is a grab bar for bathtub designed for use by individuals with balance, lower extremity, or mobility disabilities. This portable unit fits over most tubs and locks with the Securelock mechanism. The tub walls are protected by non-skid pads. The circular handle/grab area is textured for a secure grip. DIMENSIONS: The unit fits tub walls 2.75 to 5.5 inches thick. The grip height is 12 inches. CAPACITY: 350 pounds. WEIGHT: 6 pounds. WARRANTY: Limited life

Multi-Positioning Sling Gurney (Model 920-R)

The Multi-Positioning Sling Gurney, model 920-R, is a shower stretcher designed for use by individuals with severe physical disabilities or spinal cord injury. The stretcher's legs and back can be adjusted to numerous positions with a multi-positioning ratchet. Other features include dual drop side rails, four locking and two non-locking threaded stem casters, and an optional pad. DIMENSIONS (HxLxW): 30 (safety rails down) or 38 (safety rails up) x 79 x 31 inches. Casters are 4 or 6 x 1.25 inch

Multifold Ramp (Models Wcr530, Wcr630, Wcr730, Wcr830, Wcr1030, & Wcr1230)

The Multifold Ramp is a portable ramp designed to provide wheelchair or scooter access over steps and curbs or into full-sized vans and minivans. This aluminum ramp is hinged to fold in several places for transport. Ramps feature auto-locking and a suitcase-style carrying handle. The ramp is surfaced with anti-slip, high-traction safety tape. DIMENSIONS: Unfolded ramps are 30 inches wide and 5 feet (WCR530), 6 feet (WCR630), 7 feet (WCR730), 8 feet (WCR830), 10 feet (WCR1030), or 12 feet (WCR123

Multifunctional Sling Lift/transfer System (Model C3)

Manually operated sling/stretcher transfer aid. Tubular steel frame with polyester sling for seated transfers uses no chains; hand crank with screw jack to lift patient. Can transfer floor to bed heights. Options include: stretcher frame attachment for supine patients; electronic scale; seated sling with head support; additional sling $250.00. Overall height of mast 60.25 inches. Lifting range 34.25 inches. Maximum lifting capacity 350 pounds. Base: 39.25 inches long. Adjustable width 34 3/4 to

Murphy

The Murphy is a seat lift recliner chair designed for use by individuals with mobility disabilities. This motorized chair has a hardwood frame; a welded steel base; heavy-gauge, no-sag steel springs in the seat and back; dacron fibers in the arms, back, and chaise for shape retention; and a cushioned seat for comfort and support. Covered in acrylic and Olefin fabric, this chair also features traditional styling with a 10-button chair back design. In addition to the lift-out feature, this chair o

Neptune Bath Lift

The Neptune Bath Lift is a portable powered bath lift designed for use by adults with mobility disabilities. This lift fits standard tubs, and the frame is secured in the tub by four suction feet. The Neptune features a non-reclining seat with side flaps (which fold in as the lift is lowered) to facilitate transfers. The seat is detachable from the frame. The seat is protected by BioCote, an antimicrobial coating. CONTROLS: A waterproof handset has a battery status indicator and a single rocker

Neptune Toilet Lift

The Neptune Toilet Lift, also called Solo Toilet Lift, is a powered elevating toilet seat lift designed for use by individuals with lower extremity or mobility disabilities or arthritis. This switch-operated unit gently lowers and raises the user on and off the toilet in a way that mimics the natural body motion. It comes with arms which can be raised to facilitate side transfer. The controls are built into either the left or right arm. The feet have locking cups that with antislip pads. POWER:

Neuropedic Electric Adjustable Bed

The Neuropedic Electric Adjustable Bed is a motorized bed designed for use by individuals with physical, respiratory, or digestive disabilities. Standard features include the patented Neuropedic Mattress with quilted cloth cover, dual three-speed massage, easy-touch control, headboard brackets, and illuminated hand control. SIZES: Twin extra-long, full extra-long, queen, or king (two twin beds). DIMENSIONS: The twin bed is 38 x 80 inches, the full bed is 53 x 80 inches, the queen bed is 60 x 80

New Life Mattress

The New Life Mattress is a pressure relief foam mattress designed for use by individuals at risk for pressure sores or ulcers. The two-layer foam mattress is covered with waterproof and vapor proof fabric with a firmer inner cavity that provides support to the shoulder and heel area. The mattress also features side handles and supportive edges that aid in transferring in and out of bed. The handles are positioned with reinforced stitching to the underside of the mattress to prevent accidental he

Nustep T4 Recumbent Cross Trainer (Model Trs4000)

The NuStep T4 Recumbent Cross Trainer, model TRS4000, is an arm and leg exercise machine designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury or arthritis. Designed to combine a comfortable seated position with a smooth stepping motion, this exerciser provides simultaneous upper and lower body motion to work all the major muscle groups. Its ergonomic design is intended to minimize joint stress and low back pain, and it has variable step length optio

Odyssey (Models S45200 & S45300)

The Odyssey, models S45200 and S45300, is a heavy-duty four-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 55.1 x 26.4 x 39.8 inches. The ground clearance is 4.5 inches, and the turning radius is 70 inches. This scooter includes rear anti-tip wheels, heavy-duty front and rear bumpers, a front large carry basket, front and rear lights with tur

Odyssey (Models S45200 & S45300)

The Odyssey is a four-wheeled powered scooter designed for use by individuals with mobility disabilities. Features include directional front and rear lights with turn signals and a large carry basket. FRAME (LxW): 51 x 26.4 inches. The turning radius is 70 degrees with 4.5 inches of ground clearance. The scooter comes with anti- tippers, full front suspension, and front and rear bumpers. The scooter is available in red (model S45200) or blue (model S45300). CONTROLS: Adjustable tiller. SEAT: Hei

Off-The-Pot

Off-the-Pot is a floor- or wall-mounted grab bar designed to assist with bathroom mobility for individuals with balance, neurological, lower extremity, or mobility disabilities or arthritis or spinal cord injury. The unit can assist with transfers to and from a wheelchair or walker, seated balance, and balance upon standing. This device can be positioned on the right- or left- hand side of the toilet, beside the bathtub, or between the tub and toilet, and mounts to the floor or wall. Features in

Orion Ii

The Orion II is an adult manual tilt-in-space wheelchair designed for use by individuals with mobility, lower extremity, neurological, or severe physical disabilities or spinal cord injury. FRAME (LxWxH): 34.5 x 27.5 x 44 inches. The seat-to-floor height ranges from 13.25 to 20 inches, depending on the choice of wheels and casters. The frame is equipped with a low or high push bar and cane-style push handles. A multi-adjustable axle plate is standard. Rear anti-tips are optional. The frame is av

Pacesaver Eclipse Premier

The Pacesaver Eclipse Premier is a four-wheeled scooter designed primarily for outdoor use by individuals with mobility disabilities. FRAME (LxW): Overall, the scooter is 49.75 x 25.75 inches with a 4.75-inch ground clearance and a 44-inch turning radius. The wheelbase is 36.25 inches. The scooter disassembles for transport. The scooter comes in a choice of ocean blue, midnight black, or candy apple red. CONTROLS: Tiller-mounted controls are standard. The control box includes a battery-level ind

Pacesaver Espree Titan

The Pacesaver Espree Titan is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 45.5 x 24.75 inches with a 4.5-inch ground clearance and a 35-inch turning radius.The wheelbase is 33.5 inches. The scooter disassembles for transport. A stretch frame is optional. The scooter comes in a choice of ocean blue, midnight black, or candy apple red. CONTROLS: Tiller-mounted controls with thumb levers are standard. The control box includes a

Pacesaver Fusion250 & Pacesaver Fusion350

The PaceSaver Fusion250 and Fusion350 are three-wheeled scooters designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 45.5 x 22 inches (Fusion250) or 45.5 x 23.5 inches (Fusion350), and both models have a 2-inch ground clearance. The turning radius is 29.5 inches for both models. The scooters disassemble for transport, and they are available in ocean blue, midnight black, or candy apple red. CONTROLS: Tiller-mounted controls with thumb levers are standard. T

Pacesaver Plus Iii Titan

The PaceSaver Plus III Titan is a three-wheeled scooter designed for use indoors or outdoors by individuals with mobility disabilities. FRAME (LxW): 45 x 24.75 inches with a 4.5-inch ground clearance and a 35-inch turning radius. The scooter disassembles for transport. An optional stretch front frame provides an extra four inches of foot space. This scooter is available in ocean blue, midnight black, or candy apple red. CONTROLS: Tiller-mounted controls with thumb levers are standard. The contro

Pacesaver Scout M Series (Models M1 & M1-350)

The PaceSaver Scout M series is a rigid heavy-duty powered wheelchair designed for indoor and outdoor use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. Both models convert from a front-wheel drive (FWD) to a rear-wheel drive (RWD)wheelchair by selecting a switch. FRAME (HxLxW): In font wheel drive, the chair 38 to 40 (model M1) or 38.75 to 40.75 (model M1-350) x 38.75 with FWD or 38.25 with RWD x 24 inches. The height with the seat back down

Pacesaver Scout Rf-P3 & Rf-P4

The PaceSaver Scout RF-P3 and RF-P4 are rigid heavy-duty powered wheelchairs designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 36 to 39 with Admiral's seat back folded down x 40.5 x 25 inches. 24.5 to 27.5 with the Com-For-Back seat folded down x 40.5 x 25 inches. The turning radius is 21.5 inches. The ground clearance is 3 inches. The chair disassembles for transport. The Scout RF-P3 and RF–P4 include front anti-t

Pathfinder Ii Foot

The Pathfinder II Foot is a prosthetic foot designed for use by individuals with lower extremity amputation. The foot has a toe spring, a foot plate, and a pneumatic heel spring, all connected in a triangular configuration to provide shock absorption during heel strike without diminishing the energy return of the toe spring. The foot is for moderate to high activity (U.S. levels 3 and 4), and comes with a high activity foot shell, Spectra sock, proximal adapter, hand pump, removal tool, and valv

Pathfinder Turning Leg Caddy

The Pathfinder Turning Leg Caddy (TLC) is a knee walker designed for use by individuals with lower extremity disabilities. Intended for use by individuals who cannot bear weight on the foot or ankle or who have had an amputation, the unit features a platform to support the knee, shin, and ankle of the disabled leg, while allowing the remaining leg to be used freely. The unit features a height-adjustable folding frame, four large wheels with rubber tires, handlebar steering, and a hand brake. The

Patient Lift Scale Attachment (Models Hls 1 & Hls 2)

Scale attaches to Hoyer patient lifter. Pounds or kilos available. 320 pound capacity. Chrome finish.

Pediatric Table (Models 840 840C, 840D, & 840S)

The Pediatric Table, model 840, is a treatment table designed for use in therapy for children. The table features adjustable leveling feet, dual density foam, heavy gauge expanded vinyl upholstery, and smooth side guards with non-porous T-molding. The retaining walls feature a measuring tape and color decals. Model 840S includes a shelf, model 840C has a built-in cabinet, and model 840D has built-in drawers. DIMENSIONS (HxLxW): 39 x 42.5 x 29.5 inches. CAPACITY: 400 pounds. WEIGHT: 86 pounds.

Petite Recliner Lift Chair (Model 70559)

The Petite Recliner Lift Chair, model 70559, is a seat lift chair designed for use by individuals with mobility disabilities or lower extremity disabilities who need assistance rising from a chair. This three-position lift/recliner chair has a continuous seat-to-ottoman chaise pad that completely supports the user's legs. The chair has a single electric motor with a built-in emergency battery back-up that allows the chair to return to the sitting position in the event of a power outage. POWER: U

Phoenix Hd3

The Phoenix HD3 is a heavy-duty three-wheel scooter designed for use by individuals with lower extremity, mobility, neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight and a large front carry basket. FRAME: The scooter can be disassembled into 4 pieces for transport. It has rear anti-tip wheels and a plastic basket and headlight on the front of the tiller. Two sets of interchangeable color accent panels, in red and blue, are included. CONTROLS: Electronic c

Phoenix Hd4

The Phoenix HD4 is a heavy-duty four-wheel scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME: This scooter includes a headlight and a large front carry basket mounted on the tiller and rear anti-tip wheels.The scooter can be disassembled into 4 pieces for transport. Two sets of interchangeable color panels in red and blue are included. CONTROLS: Electric controller mounted on an adjustab

Phoenix Talking Scale

The Phoenix Talking Scale is a voice output digital scale designed for use by individuals with blindness or low vision. This bathroom scale has an extra-large, stable weighing platform, and it is designed to be easy to use and program. It is accurate to within 1% of body weight. The scale automatically turns on when the user steps on it. Users can set the mode to pounds or kilograms. The scale features voice commands in a choice of English, Spanish, French, or German. The voice mode can be turne

Pilot 2310 3-Wheel Medium Size Scooter (Models Pilot2310Bl18Cs, Pilot2310Bg18Cs, Pilot2310Bl20Cs & Pilot2310Bg20Cs)

The Pilot 2310 3-Wheel Medium Size Scooter, models PILOT2310BL18CS, PILOT2310BG18CS, PILOT2310BL20CS and PILOT2310BG20CS, is a three-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight, a horn, turn signals, dual rear view mirrors, a front bumper, and a front basket. FRAME (LxWxH): The overall dimensions are 47 x 22 x 38 inches. The ground clearance is 3 inch

Pilot 2410 4-Wheel Medium Size Scooter (Models Pilot2410Bl18Cs, Pilot2410Bg18Cs, Pilot2410Bl20Cs, & Pilot2410Bg20Cs)

The Pilot 2410 4-Wheel Medium Size Scooter, models PILOT2410BL18CS, PILOT2410BG18CS, PILOT2410BL20CS and PILOT2410BG20CS, is a four-wheel scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWXH): The overall dimensions are 47 x 22 x 38 inches. The ground clearance is 3 inches, and the turning radius is 54 inches. This scooter includes rear anti-tip wheels, a headlight, a horn, turn signa

Pioneer 3 3-Wheel Scooter (Model S132/s135 )

The Pioneer 3 S132/S135 3-Wheel Scooter is designed for indoor or outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, and multi-function display console. FRAME (HxLxW): 45.5 x 46 x 25 inches. The ground clearance is 4 inches and the turning radius is 31 inches. The scooter disassembles for transport or storage. Color choices are blue and red. CONTROLS: Dynamic Rhino 70A controller with thumb-lever handlebar steering. The tiller angle is

Pioneer 3 S131 3 Wheel Scooter (Model S131)

The Pioneer 3 3 Wheel Scooter, model S131, is designed for indoor and limited outdoor use by individuals with mobility disabilities. Standard features include a front basket, headlight, taillights, turn and hazard signals. FRAME (HxLxW): 45.5 x 46 x 23 inches. The ground clearance is 4 inches and the turning radius is 31 inches. The scooter blue or red. CONTROLS: Dynamic Rhino 70A controller with thumb lever handle bar steering. The tiller angle is adjustable. SEAT (WxD): 19 X 17 inches slidin

Pioneer 4 Full Size 4 Wheel Scooter (Model S142/s145)

The Pioneer 4 Full Size 4 Wheel Scooter, model S142/S145, is a scooter designed for use by individuals with mobility disabilities. Features include headlights, taillight, turn signals, and hazard lights. FRAME (HxLxW): 45.5 x 47 x 25 inches. Anti-tippers and a chromed steel bumper that also serves as a lift handle are standard. CONTROLS: Dynamic Rhino 70A controller with touch keypad and an on/off key switch. The adjustable tiller folds down for storage. SEAT (LxW): 17 x 18.5 inches. The captai

Pioneer 4 S141 4 Wheel Scooter

The Pioneer 4 4 Wheel Scooter, model S141, is designed for indoor and limited outdoor use by individuals with mobility disabilities. Standard features include a front basket, headlight, taillights, and turn and hazard signals. FRAME (HxLxW): 45.5 x 47 x 23 inches. The ground clearance is 4 inches and the turning radius is 49 inches. This scooter is available in blue or red. CONTROLS: Dynamic Rhino 70A controller with thumb lever handle bar steering. Tiller angle is adjustable. SEAT (WxD): 19 x 1

Portable Ceiling Lift (Model Pc-2)

The Portable Ceiling Lift, model PC-2, is an overhead transfer lift designed to allow transfers in multiple areas without the need for continuous track for individuals who need assistance making transfers. This system allows separate tracks to be installed in areas throughout the home or institution while only using one PC-2. Each track segment is equipped with its own roller bar to which the PC-2 attaches. To use the unit, the lift is attached to the roller bar, the transfer performed, and the

Portable Commode Chair (Model Pcc-1) & Commode Chair (Model Cc-1)

The Portable Commode Chair, model PCC-1, is a shower and commode chair with removable arms designed for use by individuals with incontinence, mobility disabilities, severe physical disabilities, or spinal cord injury. This chair disassembles for storage and transport in the included pullman suitcase, enabling the user to have the freedom to travel. Made of chrome-plated steel tubing, the chair features two removable height- and width-adjustable round, foam-padded armrests; a backrest; a commode-

Portable Power Lifts 9700 Series (Models 9700 & 9701)

The Portable Power Lifts 9700 Series are hydraulic and powered transfer lifts designed to offer stability and assist caregivers of individuals who have difficulty making independent transfers. These lifts are completely adjustable to fit needs of all users. Each lift has a wide base leg stance for greater stability and they lock in open position for added safety. The height adjusts for all bed sizes and accomodates low tubs. The padded swivel bar offers 360 degree rotation and the six hook desig

Portable Pro Pool Lift

The Portable Pro Pool Lift is a pool lift designed for use by individuals with spinal cord injury, mobility disabilities, or severe physical disabilities. This electrically powered pool lift is fully portable and can easily be removed from poolside when not in use. It does not intrude into the pool when not in use. This lift has a sliding mechanism that allows the lift to be transported easily on its included cart and then lowered onto the pool deck for use without fastening any hardware. Other

Power Ez Lift

The Power EZ Lift is a pool lift designed for use by individuals with spinal cord injury, mobility disabilities, or severe physical disabilities. This fully automatic lift has an adjustable mesh sling style seat and a rotation bar to allow an attendant to rotate the unit. The lift has stainless steel construction and a UV resistant powder coat finish. Additional features include battery operated actuator, submergible remote control, concrete embedded anchor system, rechargeable battery operation

Pride Classic 2-Position Partial Recline Lift Chair (Model Cl-10)

The Pride Classic 2-Position Partial Recline Lift Chair, model CL-10 is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a

Pride Classic 2-Position Partial Recline Lift Chair (Model Cl-20)

The Pride Classic 2-Position Partial Recline Lift Chair, model CL-20 is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a

Pride Classic 3-Position Full Recline Chaise Lounger (Model Cl-30)

The Pride Classic 3-Position Full Recline Chaise Lounger, model CL-30, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a c

Pride Classic 3-Position Full Recline Lift Chair (Model Cl-15)

The Pride Classic 3-Position Full Recline Lift Chair, model CL-15, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord.

Pride Concorde Scooter

The Pride Concorde Scooter is a three-wheeled scooter designed for indoor and outdoor use by individuals with mobility disabilities. FRAME (LxW): 45.5 x 24 inches. This scooter has front and rear running lights and a front wire basket, and disassembles for transport. Available in hunter green only. CONTROLS: Angle-adjustable tiller with a tiller-mounted control box. An on/off key switch with automatic shutoff is included on the control box. RWD: Rear-wheel drive. SEAT: Height-adjustable padded s

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-450)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-450, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both recline and lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. T

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-550L)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-550L, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. B

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-550M)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-550M, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. B

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-550S)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-550S, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. B

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-585)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-585, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both recline and lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. T

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-590)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-590, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both recline and lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. T

Pride Elegance 3-Position Full Recline Chaise Lounger (Model Ll-595)

The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-595, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Bo

Pride Elegance 3-Position Full Recline Large Chaise Lounger (Model Lc-570L)

The Pride Elegance 3-Position Full Recline Large Chaise Lounger, model LC-570L, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitt

Pride Elegance 3-Position Full Recline Medium Chaise Lounger (Model Lc-570M)

The Pride Elegance 3-Position Full Recline Medium Chaise Lounger, model LC-570M, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sit

Pride Elegance 3-Position Full Recline Petite Chaise Lounger (Model Lc-570P)

The Pride Elegance 3-Position Full Recline Petite Chaise Lounger, model LC-570P, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sit

Pride Elegance 3-Position Full Recline Petite Wide Chaise Lounger (Model Lc-570Pw)

The Pride Elegance 3-Position Full Recline Petite Wide Chaise Lounger, model LC-570PW, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing a

Pride Elegance 3-Position Full Recline Small Chaise Lounger (Model Lc-570S)

The Pride Elegance 3-Position Full Recline Small Chaise Lounger, model LC-570S, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitt

Pride Elegance 3-Position Full Recline Wide Chaise Lounger (Model Lc-570W)

The Pride Elegance 3-Position Full Recline Wide Chaise Lounger, model LC-570W, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitti

Pride Heritage 2-Position Partial Recline Lift Chair (Model Gl-58)

The Pride Heritage 2-Position Partial Recline Lift Chair, model GL-58, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by

Pride Heritage 3-Position Full Recline Large Chaise Lounger (Model Gl-358L)

The Pride Heritage 3-Position Full Recline Large Chaise Lounger, model GL-358L, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the cha

Pride Heritage 3-Position Full Recline Medium Chaise Lounger (Model Gl-358M)

The Pride Heritage 3-Position Full Recline Medium Chaise Lounger, model GL-358M, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the ch

Pride Heritage 3-Position Full Recline Petite Chaise Lounger (Model Gl-358P)

The Pride Heritage 3-Position Full Recline Petite Chaise Lounger, model GL-358P, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the ch

Pride Heritage 3-Position Full Recline Petite Wide Chaise Lounger (Model Gl-358Pw)

The Pride Heritage 3-Position Full Recline Petite Wide Chaise Lounger, model GL-358PW, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to

Pride Heritage 3-Position Full Recline Small Chaise Lounger (Model Gl-358S)

The Pride Heritage 3-Position Full Recline Small Chaise Lounger, model GL-358S, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the cha

Pride Specialty 3-Position Full Recline (Model Gl-310)

The Pride Specialty 3-Position Full Recline Lift Chair, model GL-310, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a co

Pride Specialty 3-Position Full Recline Chaise Lounger (Model Lc-105)

The Pride Specialty 3-Position Full Recline Chaise Lounger, model LC-105, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by

Pride Specialty 3-Position Full Recline Chaise Lounger With Flip-Open Arms (Model Ll-571)

The Pride Specialty 3-Position Full Recline Chase Lounger with Flip-open Arms, model LL-571, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connect

Pride Specialty 3-Position Full Recline Chaise Lounger With Footrest Extension (Model Ll-575)

The Pride Specialty 3-Position Full Recline Chase Lounger with Footrest Extension, model LL-575, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control con

Pride Specialty 3-Position Full Recline Chaise Lounger With Transfer Arms (Model Ll-570T)

The Pride Specialty 3-Position Full Recline Chase Lounger with Transfer Arms, model LL-570T, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connect

Pride Specialty Infinite Position Sleep Full Recline Chaise Lounger (Model Ll-770L)

The Pride Specialty Infinite Position Sleep Full Recline Chaise Lounger, model LL-770L, is a seat lift chair sleeper, and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. Designed for sitting, reclining, standing, and as a bed, this chair features full recline positioning and a lift mechanism that facilitates all three functions. Both the recline, sleep, and li

Pride Specialty Infinite Position Sleep Full Recline Chaise Lounger (Model Ll-770S)

The Pride Specialty Infinite Position Sleep Full Recline Chaise Lounger, model LL-770S, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. Designed for sitting, reclining, standing, and for use as a bed, this chair features full recline positioning and a lift mechanism that facilitates all three functions. Both the recline, sleep, and lif

Pride Specialty Infinite Position Trendenlenburg Chaise Lounger (Model Lc-125L)

The Pride Specialty Infinite Position Trendelenburg Chaise Lounger, model LC-125L, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. Designed for standing, sitting, and reclining, this chair features full recline with infinite Trendelenburg positioning and a lift mechanism that facilitates all three functions. Both the recline and lift m

Pride Specialty Infinite Position Trendenlenburg Chaise Lounger (Model Lc-125M)

The Pride Specialty Infinite Position Trendelenburg Chaise Lounger, model LC-125M, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. Designed for standing, sitting, and reclining, this chair features full recline with infinite Trendelenburg positioning and a lift mechanism that facilitates all three functions. Both the recline and lift m

Pride Specialty Infinite Position Trendenlenburg Chaise Lounger (Model Lc-125S)

The Pride Specialty Infinite Position Trendelenburg Chaise Lounger, model LC-125S, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. Designed for standing, sitting, and reclining, this chair features full recline with infinite Trendelenburg positioning and a lift mechanism that facilitates all three functions. Both the recline and lift m

Pu Moulded Perching Stool Tubular Back And Arms (Model 505 Pu)

The PU Moulded Perching Stool Tubular Back and Arms, model 505 PU, is an adjustable stool designed for individuals with balance or mobility disabilities. Equipped with an ergonomically designed hygienic padded seat, this stool's frame is made of high tensile steel tubing, and the back and arms are made of the same tubing and are not padded. The seat padding is made of polyurethane (PU) molded components which are non-slip and fire resistant. Other features include front and back bracing struts f

Pu Moulded Perching Stool With Padded Back (Models 503 Pu)

The PU Moulded Perching Stool with Padded Back, model 503 PU, is an adjustable stool designed for individuals with balance or mobility disabilities. Equipped with an ergonomically designed hygienic padded seat and back, this stool's frame (including the back) is made of high tensile steel tubing. The seat padding is made of polyurethane (PU) molded components which are non-slip and fire resistant. Other features include front and back bracing struts for additional strength and four rubber tipped

Pu Moulded Perching Stool With Padded Back And Padded Arms (Model 507 Pu)

The PU Moulded Perching Stool with Padded Back and Padded Arms, model 507 PU, is an adjustable stool designed for individuals with balance or mobility disabilities. Equipped with an ergonomically designed hygienic padded seat, back and arms, this stool's frame (including the back and arms) is made of high tensile steel tubing. The seat padding is made of polyurethane (PU) molded components which are non-slip and fire resistant. Other features include front and back bracing struts for additional

Pulley Bench

The Pulley Bench is an exercise bench designed for use in rehabilitation treatment of the shoulder and thoracic region. This highly adaptable bench assists in isolating specific muscle groups. It can be used as a flat bench or with adjustable upright support for thoracic or shoulder stabilization. The upright support may be angled to any position from 0 degrees to 90 degrees, and has a height adjustment of 12 inches to 24 inches. The front pad raises 20 degrees, and the rear pad rotates for stor

Pvi Bariatric Panel Ramp (Models Bpr348, Bpr448, Bpr548, & Bpr648)

The PVI Bariatric Panel Ramp, models BPR348, BPR448, BPR548, and BPR648, is a modular ramp designed for use by individuals with mobility disabilities. It has three interlocking lightweight ramp sections, and additional panels (not included) can be used to increase the width of the ramp. The welded ramp has an anti-slip high traction surface, and outside panels have curbing. It accomodates wheelchairs and scooters with various wheel configurations. A safety DVD and steel security pins are include

Pvi Bariatric Threshold Ramp (Models Bar1636 & Bar2436)

The PVI Bariatric Threshold Ramp, models BAR1636 and BAR2436, is designed for use to make doorways accessible to people with mobility disabilities or spinal cord injuries who use wheelchairs. Made of aluminum, these ramps have an anti-slip, high traction surface, and there are holes punched in the top corners to facilitate installations. Hardware to secure the ramp to a surface is included. DIMENSIONS (LxW) 16 x 36 inches for thresholds 1.5 to 2 inches high (BAR1636); 24 x 36 inches for threshol

Quantum Bath Chair (Models Q100C & Q100F)

The Quantun Bath Chair is a bath seat designed for use by individuals with mobility disabilities. This compact, collapsible chair is designed for travel or daily use and the lightweight PVC frame requires no tools for disassembly. The flexible configuration adapts for right or left entry and transfer and right or left faucets. This seat features stainless steel hardware, suction-cup tips on the legs, a covered back support, and a single armrest. A channel in the seat enables the shower curtain

Quickie P-222 Se

The Quickie P-222 SE is a powered sports wheelchair designed for use by active individuals with severe physical disabilities, spinal cord injury, and mobility disabilities. An optional manual conversion kit enables the user to covert the chair from power drive to a self propulsion system. FRAME: Features a center of gravity tilt option. Available in eighteen color choices. CONTROLS: Joystick is standard. Breath control, chin control, penta switch, head control, star board, and wafer board are a

Quickie T45

The Quickie T45 is an adult manual tilt-in-space wheelchair designed for use by people who need to change positions without leaving the wheelchair. FRAME: The frame is available in regular and long configurations, and frame widths range from 14 to 20 inches in 1-inch increments. Rear anti-tip tubes are standard. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in 15- to 17-inch depths, in 1-inch increments on the regular frame and in 18- to 2

Raisa Lift

The Raisa Lift is a powered transfer lift designed for use with individuals with mobility disabilities. Standard features include a width-adjustable U-shaped base with four heavy-duty ball bearing, double caster wheels (two with parking brakes), motorized height-adjustable knee pads, a sling that fits under the arms and around the back, easy-grip handlebars, and slip-resistant removable footplates to ebable use as a gait trainer. The lift's Raisa Driver offers motor assisted forward and reverse

Ranger Lift

The Ranger Lift is pool lift designed for use by individuals with spinal cord injury, mobility disabilities, or severe physical disabilities. This electric lift features a compact lightweight design that does not intrude into the pool when not in use and makes this unit convenient for use in smaller hotels and motels and backyard pools. The Ranger Lift features stainless steel construction and durable white power coat finish. Additional features include a submergible control handset, dual flip u

Refresh Walk-In Shower

The Refresh Walk-in Shower is a roll in shower stall with built-in grab bars and seat designed to be accessible to wheelchair users and individuals with lower extremity or mobility disabilities or spinal cord injury. This low-entry shower has bi-fold shower doors that open 180 degrees, providing barrier-free access across the width of the shower. The half-height folding doors have tempered raindrop pattern panels that cover the shower opening when closed yet provide full access to the shower whe

Renegade & Renegade Lp

Renegade and Renegade LP (Low Profile) are prosthetic feet designed for use by individuals with lower extremity amputation. This foot prosthesis has a carbon-fiber Z-shaped heel for vertical shock deflection, with a full-length sole plate and an integral male pyramid connector. Through active tibial progression, energy is absorbed and redirected, helping the user walk or run more smoothly. The foot is available in stiffness categories from 1 to 9. DIMENSIONS: Standard lengths are 22, 23, 24, 25,

Rest-Q Mattress

The Rest-Q Mattress is a therapeutic foam mattress designed for use by individuals in need of pressure relief, pain management, and wound care. The mattress features a waterproof top cover, a resilient layer of pressure reduction cushioning material that covers the complete surface, a soft strip of pressure relief polymer for hips and shoulders, and a lateral support section that provides full-length body support along the spine. The mattress is also equipped with side handles to aid transfers i

Rifton Sololift (Model R710)

The Rifton SoloLift, model R710, is a powered transfer lift designed for use with individuals up to 76 inches tall with moderate to severe physical disabilities. This transfer device features the SoloVest which is made from medical-grade anti-microbial and anti-slip material and allows for a snug and comfortable above-the-waist lift. The low-profile lift arm lifts in a natural sit-to-stand arc and the swivel lock enables the individual to be transferred to a front loading device. The U-shaped ba

Roll-A-Bout (Models Ra-250, Hd-400, Hdt-300, Hdt-400, Atv-250, Atv-400)

The Roll-A-Bout is a hemi walker designed for youth and adults with walking disabilities. It can be used in place of crutches by those with injuries below the knee, or those with multiple injuries who are unable to use crutches. The lightweight Roll-A-Bout has four wheels and a platform on which to rest the injured leg. Foam cushions on the platform support the knee and ankle, and ensure that no pressure will be exerted on the lower leg. The wheels are offset in the direction of the injury to

Roll-Inbuddy Heavy Duty (Model Sb4)

The Roll-InBuddy Heavy Duty, model SB4, is a wheelchair shower commode designed for use by individuals with balance, lower extremity, mobility or severe physical disabilities or spinal cord injury. It is ergonomically designed to be used in roll-in showers and the height of the chair is adjustable to accommodate tall users. It features a cut-out commode seat with a commode pan that attaches under the seat, and it is capable of rolling over toilets up to 21 inches tall with the pan removed. Othe

Roll-Inbuddy With Tilt (Model Sb3T)

The Roll-InBuddy with Tilt, model SB3T, is a wheelchair shower commode designed for use by individuals with balance, lower extremity, mobility or severe physical disabilities or spinal cord injury. It is ergonomically designed to be used in roll-in showers and the seat tilts back up to 30 degrees from the upright position. It features a cut-out commode seat with a commode pan that attaches under the seat, and it is capable of rolling over toilets up to 18 inches tall with the pan removed. Other

Royale 4

The Royale 4 is a 4-wheeled scooter designed for outdoor use by individuals with lower extremity and mobility disabilities or as an alternative to driving. This scooter has independent front suspension and can be used on sidewalks, streets and dedicated paths where permitted. FRAME (LxWxH): 62 x 29 x 53 inches. The seat folds for transport or storage. The Royale 4 has an underbody ground clearance of 6 inches and a turning radius of 63 inches. Available colors are burgundy red, midnight black an

Safe Hands Bathtub (Model Was-888)

The Safe Hands Bathtub, model WAS-888, is a walk-in bathtub designed for use by individuals with balance or mobility disabilities or arthritis. This walk-in tub has a waterproof door, a seat, a retractable hand shower, and four adjustable water jets for hydrotherapy massage. The tub fits one adult, and is deep enough to allow the user's entire body to be submerged while sitting down. POWER: Uses 110/120 volts. OPTIONS: 8 water jets, add $499; heated blower with 20 air jets, add $999; custom colo

Safe Step Walk-In Shower

The Safe Step Walk-In Shower is an accessible shower stall with built-in seat and grab bar designed for use by individuals with balance, lower extremity or mobility disabilities. This shower has a 4-inch entry step and a built-in folding safety chair with armrests. Both the seat and armrests have extra thick pads. The Safe Step Walk-In Shower features a built-in vertical safety grab bar adjacent to the seat; extra thick, commercial grade anti-slip safety flooring; Delta dual showers, including a

Sara Stedy

The Sara Stedy is a transfer aid or standing designed for use by individuals with balance, lower extremity, mobility or walking disabilities or spinal cord injury. This mechanical device is used to move a person short distances, such as to and from the toilet, or to assist a person to stand. From a sitting position, the user can grasp the crossbar at the top of the frame and pull up to a standing position. To use the Sara Stedy to transfer the user, the caregiver then flips down the seat, and th

Scale With Wheelchair Ramp (Models 485 & 4851)

The Scale with Wheelchair Ramp is a patient weighing scale with a built-in ramp designed for weighing individuals without transfers. The scale can only be used with standard four wheel wheelchairs. Model 485 is calibrated in pounds and ounces; model 4851 is calibrated in the metric system. CAPACITY: 350 pounds. WEIGHT: 63 pounds. COLOR: White.

Scout Lift

The Scout Lift is a pool and hot tub lift designed for use by individuals with spinal cord injury or lower extremity, mobility or severe physical disabilities. This lift is constructed of stainless steel with an epoxy powder coating, and it can be adapted to most existing 6-inch deep anchors. The Scout Lift can clear walls up to 6 inches high and can be set between 12 and 36 inches from a pool edge. It can rotate 360 degrees in either direction. Other features include dual flip-up arms, adjustab

Seca Large Dial Personal Scale - Colorata (Model 760)

The SECA Large Dial Personal Scale - Colorata, model 760, is a scale with large numbers designed for use by individuals with low vision or seniors. This scale has a precision movement and a large circular display marked out in one-pound gradations. Large numbers show every ten pounds. DIMENSIONS: The scale is 12 x 4 x 18 inches. The platform is 11 x 11 inches. CAPACITY: 320 pounds. WEIGHT: 9 pounds. COLOR: Red, white, navy blue, or yellow. WARRANTY: 3-year warranty.

Sherwood Adjustable Stools (Models Aa1522, Aa1534, & Aa1536)

Sherwood Adjustable Stools are shower or bathtub stools designed for use by individuals with spinal cor injury or mobility or balance disabilities. Designed to be used in a bathtub or a shower, stools are height adjustable and feature a slightly lower front than the back to aid in sitting and rising. The height-adjustable tubular frame has slip-resistant rubber feet and the seat is padded. Model AA1522 is the stool only, model AA1534 has a tubular backrest and armrests, and model AA1536 has a pa

Shoprider Sprinter Xl4 (Model 889-4)

The Shoprider Sprinter XL4, model 889-4, is a heavy-duty four-wheeled scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight, a chrome front bumper, and a large front wicker basket. FRAME (LxWxH): The overall dimensions are 52 x 22.5 x 30 to 41.5 inches. The wheelbase is 34.5 x 19 inches with a ground clearance of 4 inches. The turning radius is 54 inches. The frame disassembles for t

Shower Aide Chair

The Shower Aide is a transfer aid designed for use by individuals with balance disabilities when bathing to provide protection from falls and resulting injuries. The chair allows the bather to sit on the seat outside of the tub or shower, fold down the arms and swivel the chair to slide into the tub or shower and lock the seat in position. When the shower is completed, the user lifts the locking lever, swivels the chair back to the outside of the tub/shower, where the unit again locks into posit

Single Rider Mobility Cart

The Single Rider Mobility Cart is a personal electric vehicle designed for use by individuals with walking or balance disabilities, arthritis or limited stamina. This low-speed vehicle does not require a driver’s license for most uses. It has one 360-degree swivel seat with adjustable height and forward position, a lap belt and chest support, single right- or left-hand control, wraparound bar, front and rear suspension, and front and rear attachment points. The frame/chassis is made of welded tu

Single Rider Outdoor Mobility Car

The Single Rider Outdoor Mobility Car is a personal electric vehicle designed for use while hunting by individuals with walking, circulatory, or balance disabilities or arthritis or limited stamina. This single rider hunting cart allows the user to hunt whole seated in the vehicle. When the user approaches a target, he or she can position the vehicle, put it in “park,” and then rotate the seat and shoot the target while seated. It has a 360-degree swivel seat with adjustable height and forward p

Ski Pad

The Ski Pad is an emergency evacuation system designed for use with individuals with mobility disabilities or spinal cord injury. Made of a rectangular foam pad covered by a vinyl, the unit has a handle above the user's head and a handle below the user's feet. It has two safety restraints at the torso and the shins to secure the user to the pad, and a pocket at the bottom in which the user places his or her feet. The safety restraints fasten with standard seat belt buckles. Once the user is secu

Ski Sheet

The Ski Sheet is an emergency evacuation system designed for individuals with mobility disabilities or spinal cord injury and other people who are unable to get out of bed. The Ski Sheet straps to the underside of a mattress of a bed with four elastic straps that fit over the mattress corners. In case of emergency, the caregiver(s) extend the halves of two safety restraints from the four corners of the sheet and fasten across the chest and legs of the user, securing him or her to the mattress. W

Sl-1000 Stairlift

The SL-1000 Stairlift is an interior seat lift designed for use by individuals with balance, lower extremity, mobility, or walking disabilities or arthritis. The lift works on straight stairs in residential applications, enabling the user to glide up and down the stairway. The lift has a 0.5 horsepower motor, and it can cover inclines ranging from 25 to 50 degrees, with a maximum travel distance of 32 feet, at a nominal speed of 20 feet per minute. It has a high capacity seat with adjustable wi

Sl600 Pinnacle Premium Stair Lift

The SL600 Pinnacle Premium Stair Lift is an interior stair lift designed for use by individuals with balance, mobility, or walking disabilities. This stair lift has a comfortable seat with height adjustment and folding footrest. The track/rail is made of clear anodized aluminum. The lift has a 24-volt direct current (DC) motor. The SL600 can be configured to be controlled by the right or left hand. The seat travels up to 70 feet, swivels at upper landing, and folds back against the wall when not

Solo

The Solo is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 45.5 x 24 inches. Ground clearance is 4 inches. The scooter is available in red, blue, or hunter green and disassembles for transport and storage. RWD: Rear wheel transaxle drive. CONTROLS: Controls and key lock are located on the adjustable tiller. SEAT: The removable swivel seat adjusts from 17 to 20 inches high in one-inch increments. A powered seat lift is optional.

Solo Ii (Models 1262 & 1264)

The Solo II, models 1262 and 1264, is an add-on power unit designed for the manual wheelchair user who wants to upgrade to a power wheelchair without investing in a completely new chair. The Solo II converts a manual wheelchair to a power chair with just the replacement of the rear wheels, and the installation of a joystick, motor drives and batteries. Solo II models 1262 and 1264 are designed to fit wheelchairs with seat widths from 14 inches to 20 inches. Model 1262 has a 20:1 gear ratio and m

Solo Iv & Solo Iv Hd

The Solo IV and the Solo IV HD are four-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 48.5 x 24 inches. Ground clearance is 4 inches with 10-inch rear wheels. These scooters are available in red or blue and disassemble for transport and storage. RWD: Rear wheel transaxle drive. CONTROLS: Controls and key lock are located on the adjustable tiller. SEAT: The removable swivel seat adjusts from 17 to 20 inches high in one-inch increments.

Solo Ltd

The Solo LTD is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 45.5 x 24 inches. Ground clearance is 4 inches with 10-inch rear wheels. The scooter is available in red and disassembles for transport and storage. RWD: Rear wheel transaxle drive. CONTROLS: Controls and key lock are located on the adjustable tiller. SEAT: The removable swivel seat adjusts from 17 to 20 inches high in one-inch increments. A powered seat lift is opti

Solorider 3400

The SoloRider 3400 is an adapted golf cart and personal electric vehicle designed for use by individuals with walking or balance disabilities, arthritis or limited stamina. This single rider golf car allows the user to play golf without getting out of the cart. When the user approaches a golf ball, he or she can position the vehicle, put it in “park,” and then rotate the seat and hit the ball while seated. The frame/chassis is made of tubular steel with powder-coated finish and has a 7-inch grou

Southpaw Biorbital Accelerator (Model 1700)

The Biorbital Accelerator, model 1700, is a rotational swing designed to provide vestibular stimulation through rotational, vertical and orbital motion for persons with physical disabilities. The steel crossbar serves as a teeter-totter which permits an exagerated movement. The main pivot of the crossbar can be moved by shifting the rotational device to one of three positioning eye bolts. This allows the versatility of having two different sized clients use the equipment. The Biorbital Accelerat

Southpaw Child And Adult Sling Swings (Models 133 & 134)

The sling swing, models 133 and 124, is a suspended hammock swing designed to provide full and even support of the torso for individuals with physical disabilities. The swing is made of soft nylon knit fabric which is better tolerated by tactilely defensive clients and will not gather or bunch with the weight of the client. Supported with heavy duty vinyl for strength and durability, the swing offers responsive support, provides all support in a flexion position and offers vestibular stimualtion

Southpaw Flexion T-Bar (Models 1919, 1920 & 1921)

The Flexion T-Bar, model 1919, is a sensory integration device designed to challenge flexion patterns for persons with physical disabilities. Individuals can hold on with arms and legs while being pushed or two people can ride at the same time. The T-bar also allows clients to hang beneath and shift from side to side while it is swinging. The T-Bar is heavily padded to cushion the seat and has a control strap to control the movement. The swing can be used with the adjustable Vertical Stimulation

Southpaw Interaction Dual Swing (Model 1630)

The Interaction Dual Swing, model 1630, is a rotational swing designed to encourage interaction and provide stimulation for individuals with a physical disability. It allows clients to practice playing with each other. The swing provides both rotational and orbital stimulation and demands postural adjustment. The Package includes two lines and spreader bar, four leg loops and one Safety Snap. OPTIONS: Also available is the Southpaw Sling Seat, model 1625, which is a six inch sling seat designed

Southpaw Pony Bolster Swing And Deluxe Pony Bolster Swing (Models 1005 & 1015)

The Pony Bolster Swing, model 1005, is a smaller bolster swing designed to be used for challenging postural adjustments and balance reactions for individuals with a physical disability. It is similar to the Standard Bolster Swing (see separate entry) but is smaller and therefore is good for smaller spaces and smaller children. It is easier to hang and transport and the top control lines and crossbar make it easy to adjust. The swing comes with a built in Safety Rotational Device and five Southpa

Southpaw Soft Steps (Model 1429)

Soft Steps, model 1429, are therapy mats designed to allow therapists to vary the height perception for individuals who have a physical disability. Each mat is a different size and when combined creates a number of steps as desired. Each mat is easily attached to other mats with a hook and loop fastener so a variety of combinations are possible. The Soft steps can be used to develop balance and reciprocating skills for gravitationally insecure clients. The mats are made of durable bi-foam and ar

Southpaw Standard & Mini Glider Bolsters (Model 1006 & 1007)

The Glider Bolster, models 1006 and 1007, is a versatile bolster swing with a platform for individuals with a physical disability. Because it has a larger platform, it can accomodate larger clients in all developmental positions. It can be used by the one or more clients or the client and therapist together. The bolster can be hung from two or four points and can be moved in smooth arcs or gently rocked. Each bolster is dual colored to identify the soft versus hard padding. The therapist can swi

Southpaw Standard And Deluxe Bolster Swing (Model 1001 & 1000)

The Standard and Deluxe Bolster Swings, models 1001 & 1000, are therapuetic suspended pieces of equipment designed to challenge postural adjustments and balance reactions for individuals who have physical disabilities. The client can be positioned on top of the bolster or hang underneath to provide a variety of progressive flexion activities. Each of the bolster swings comes complete with a built in Safety Rotational Device and five safety snaps. They are heavily padded and vinyl covered wit

Southpaw Standard Dual Swing And Super Booster Swing (Models 1600 & 1605)

The Standard Dual Swing, model 1600, is designed to provide orbital and rotational movements for individuals who have a physical disability. It can be used in the prone position to work on extension, or sitting to provide vestibular stimulation or work on motor planning skills. When sitting, the swing can be used by one or two people. The swing comes with four leg loops made of soft webbing attached to four poly lines. It fastens at the top with two Safety Snaps (see separate entry) which are in

Splash! Mariner Lift & Splash! Hd

The Splash! Mariner Lift is a boat lift designed for use by individuals with mobility disabilities or spinal cord injury. It provides access to watercraft using a universal sling assembly with an a mechanical actuator, and is made with corrosion proof materials. The Splash! HD is a heavy-duty version of the Splash! with the same features and a larger lifting capacity. POWER: Uses a 24-volt rechargeable battery. CAPACITY: 300 pounds for the standard model and 375 pounds for heavy-duty version. WA

Springless Balance-Beam Scale

The Springless Balance Beam Scale is a beam scale designed for use by individuals who cannot read or balance on floor-level scales This scale features a waist-high easy-view display plate, a bubble level, and sliding adjustment. The scale measures in quarter-pound increments. DIMENSIONS (LxWxH): The base is 13.25 x 9 7/8 x 3.25 inches. The beam is 36.5 inches high x 18 inches wide. CAPACITY: 350 pounds. WEIGHT: 28 pounds. WARRANTY: Five-year warranty.

Stainless Steel All-Terrain Beach Walker

The Stainless Steel All-Terrain Beach Walker is a walker for the beach designed for use by individuals with balance, walking, or lower extremity disabilities. The walker frame is powder-coated 316L stainless steel tubing and the unit is equipped with two front casters that rotate 360 degrees and two fixed rear casters. All wheels have large Wheeleez wheels. DIMENSIONS: 32 inches high and 30 inches wide. The wheels are 30 centimeters in diameter. WEIGHT: 15 to 35 pounds. CAPACITY: 350 pounds. COL

Stand Aid

The Stand Aid is a powered Standing Aid designed for use by individuals with mobility disabilities. This standing frame is available with the choice of a powered lift, powered drive, or both. FRAME: This stander has a steel frame with a silver vein powder coat finish. The stander is equipped with contoured knee pads, a hip belt, and a plexiglass tray and it accommodates individuals from 4 feet 2 inches tall to 7 feet tall. POWER LIFT: The lift utilizes two twelve-volt actuators operated by a tog

Stannah Straight Stairlift (Model 420)

The Stannah Straight Stairlift, model 420, is an interior stair lift designed for use by individuals with mobility, walking, or balance disabilities. This stair lift has a folding seat with arms and a footrest, and comes with two infrared wireless remotes, one for each landing. Safety features include a center-clasp seat belt, an over speed governor, and safety sensors on the footrest and both sides of chair, to stop the stairlift if it touches an obstruction. A key lock is located under one of

Stationary Digital Wheelchair Floor Hugger (Model 6495)

The Stationary Digital Wheelchair Floor Hugger, model 6495, is a digital wheelchair scale designed to accommodate wheelchair users without requiring transfers. This dual-capacity scale features a digital L.E.D. readout with a pound/kilogram selector switch, keypad entry of tare weight, built-in ramp, and a platform with a non-skid mat designed to accommodate all wheelchair sizes. POWER: 120 Alternating Current Volts (VAC), 50/60 Herz power adapter with 6 foot power cord. CAPACITY: 400 pounds or

Stepless Lifting Platform (Models Lp1 & Lp3)

The Stepless Lifting Platform is an interior or exterior wheelchair lift designed to lif individuals who use wheelchairs or who have walking disabilities over small height differences. Designed for use in situations in which ramps would be too steep or to long, these units can be used indoors or outdoors and as permanent or temporary installations. A choice of an electrically or manually operated ramp provides access to the lift and prevents the wheelchair from rolling off while the lift is in u

Sterling 1000 Series Straight Stair Lift

The Sterling 1000 Series Straight Stair Lift is an interior stair lift designed for use by individuals with balance, lower extremity, or mobility disabilities. The lift has a folding seat that runs on an aluminum track on one side of the stairway. There are three seating options: A standard Luxury seat, a SpaceSaver seat that takes up less space for use on narrower stairs, and a Perch seat that allows the user to travel in a more upright posture. The seats have wipe-clean, flame-retardant uphols

Sterling 2000 Series Curved Stair Lift

The Sterling 2000 Series Curved Stair Lift is an interior stair lift designed for use by individuals with balance, mobility, or walking disabilities. The lift fits any curved stairway and fits close to the wall with a swivel seat and folding footrest. OPTIONS: Perch seat alowing the user to go up and down stairs in a semi-standing posture; overrun to allow the user to step off at the top landing without swiveling the seat. POWER: Uses 24 volts direct current (DC) battery. DIMENSIONS: Seat swivel

Sterling 303 Reclining Bath Lift

The Sterling 303 Reclinining Bath Lift is a portable powered bath lift designed for use by individuals with lower extremity, mobility, neurological, or balance disabilities or spinal cord injury. This lift is securely fixed to the bathtub by suction cups. To remove the lift from the tub, the suction cups are released using the quick-release handle. The lift is equipped with a reclining seat with deluxe comfort covers and large folding side panels that open to rest on the edges of the tub, creat

Storm Series Tdx5

The Storm Series TDX 5 is a powered wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 33.25 to 41inches (depending on seating system) x 35.25 x 25 inches (26.5 with joystick). This chair includes Stability Lock and SureStep suspension configured for obstacles up to 3 inches high. Finish options include basic colors (deep purple, cobalt blue, anthracite, wet black, red, silver vein, lavender, wet black wit

Super Power Ez Lift

The Super Power EZ Lift is a pool and hot tub lift designed for use by individuals with spinal cord injury, or lower extremity, mobility or severe physical disabilities. This lift is constructed of stainless steel coating with a durable epoxy powder coating. It has an adjustable mesh sling style seat, a handheld controller, and a rotation bar to allow an attendant to rotate the unit. The Super Power EZ Lift can be used with above ground backyard pool or spa with walls up to 10 inches thick and

Surehands 2000 Series Track-To-Track System

The SureHands 2000 Series Track-to-Track System is a transfer lift designed for use by individuals with mobility, severe physical, or neurological disabilities or spinal cord injury. This compact mobile lift can be moved from place to place and used wherever ceiling track has been installed. Its low height makes it appropriate for locations with low ceilings or mobile home interiors or for lifting onto high beds or high mat and changing tables. It has anergonomically designed carrying handle and

Surehands 5002 Mobile Lifter With Integrated Weighing Scale

The SureHands 5002 Mobile Lifter with Integrated Weighing Scale is a powered transfer lift designed for use by individuals with mobility, severe physical, or neurological disabilities or spinal cord injury. This mobile lift allows users to be lifted and weighed in a one-step process. The scale is located on the control box. The lift is constructed of aluminum and has an adjustable base to allow use in narrow hallways or in transfers from wide wheelchairs. The unit has a lifting range from floor

Swim-Lift Lolo Ada Pool Lift (Model Wp400)

The Swim-Lift Lolo ADA Pool Lift, model WP400, is a pool lift designed for use by individuals with mobility disabilities or spinal cord injury. This lift provides autonomy for the recreation facility patron who may experience difficulty entering or exiting a swimming pool. This lift can be used with an in-ground pool, including pools with a minimum deck to pool bottom dimension of 42 inches (typically a 36-inch water depth). The Lolo lift will accommodate various anchor locations ranging from 18

Swivel Cushion

The Swivel Cushion is a car transfer aid designed for use by individuals with arthritis or mobility disabilities. The two-piece, low-profile cushion has a soft top that rotates smoothly on a flat center disk. The nonskid bottom conforms to the shape of the seat and keeps the unit in place. DIMENSIONS: 16 inches in diameter. CAPACITY: 350 pounds.

Swivel Sliding Transfer Bench

The Swivel Sliding Transfer Bench is a transfer bench designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This adjustable bench enables the user to sit on the contoured seat, swivel into position, and slide into the bathtub. The seat locks into position at the touch of a button. Features include a contoured, molded seat and back with drainage holes; an aluminum frame; and suction cup feet. DIMENSIONS(WxD): The frame is 35 x 21 inches and requires

T4R Recumbent Cross Trainer

The NuStep T4r Recumbent Cross Trainer is an arm and leg exercise machine designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury or arthritis. This exerciser combines lower and upper body movement for a full body workout aided by an ergonomic body position design. The T4r's self-powered, belt drive has user controlled step length with power output range of 5-800 watts. The center grab ring for user's hands provides support and enhances safety. The arm

Talking Digital Bathroom Scale

The Talking Digital Bathroom Scale is a voice output scale designed for use by individuals who are blind or have low vision. It features a liquid crystal display (LCD) display that shows weight in pounds, kilograms, or stones. Other features include a choice of current weight readings in English, Spanish or French, volume control, and a slip-resistant plastic platform. DIMENSIONS (HxlxW): 12.5 x 12 x 2 inches. CAPACITY: 330 pounds.

Tilton Mobile Shower Chair (Model 142D)

The Tilton Mobile Shower Chair, model 142D, is a caster shower chair designed for use by individuals with balance and mobility disabilities. The frame is made of nylon coated steel, and the seat is made of polypropylene. This shower chair features adjustable height and detachable arms. It has two standard front castors, two rear brake castors, and an "H" section base frame for added strength. The seat has drainage holes. DIMENSIONS: The width between arms is 18 inches. The outside depth (front t

Tilton Mobile Shower Chairs (Model 142)

The Tilton Mobile Shower Chair, model 142, is a caster shower chair designed for use by individuals with balance and mobility disabilities. The frame is made of nylon coated steel and the seat is made of polypropylene. The chair has two standard front castors, two rear brake castors, and an "H" section base frame for added strength. The seat has drainage holes. DIMENSIONS: The width between arms in 18 inches. The outside depth (front to back) is 20 inches. The floor to seat height is 18 inches,

Top End Terminator Titanium Wheelchair

The Top End-Terminator Titanium Wheelchair is a heavy-duty manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Custom-built rigid lightweight frame with 1-inch diameter chrome-moly tubing. Custom dimensions include position of front caster housings, adjustable center of gravity, front and rear seat height and front frame angle. Options include curved or square rear frame, tapered or V front frame, a rear suspension system, anti-tip bars, and

Tracabout Individual Recreational Vehicle 2000 (Irv 2000)

The TRACABOUT Individual Recreational Vehicle 2000 (IRV 2000) is a powered wheelchair designed for indoor and outdoor use by individuals with mobility disabilities. This chair crosses soft surfaces, plowed earth, snow, mud, ruts, sticks, and other obstacles less than four inches high and also maneuvers within the home. FRAME (LxW): 38 x 28 inches and fits through most standard doorways. The chair turns in its own length with a zero turning radius. CONTROLS: Joystick controller mounted on the arm

Travelabout 2811, Compact Lightweight

The 2811 TravelAbout is designed for all-purpose residential or institutional use by adults. FRAME: The frame is lightweight, when folded the wheelchair is 10 inches wide. The frame is constructed of heavy square steel x-brace that permits use by obese individuals. The Travel About frame is 20 inches wide. SEAT: Seat-to-floor height is 18 inches, seat width 18 inches, back height 15 inches. UPHOLSTERY: The upholstery is embossed with textilene inner liner, brown is the standard color. However, 1

Traveler Ii Xrc500 Ada Compliant Pool Lift

The Traveler II XRC500 ADA Compliant Pool Lift is a pool lift designed for use by individuals with spinal cord injury, mobility disabilities, or severe physical disabilities. This electrically powered pool lift can be used with in-ground and above ground swimming pools. The Traveler II can be installed in a 1.9-inch anchor in the pool deck (not included) or it can used with the Mobile Anchor Transport Evolution (MATE) (not included) if the user needs a portable lift. It is coated with Spectra Sh

Trionic Tour Urban Walker

The Trionic Tour Urban Walker is a folding wheeled walker with seat designed for use by individuals with walking, lower extremity, or balance disabilities. The unit has a detachable carrying basket with a zip-pocket. This walker also has a seat with rigid plastic inserts and increased depth for greater leg support. The seat fabric has reflective striping for greater night visibility. The walker also comes with a reversible rain cover that fits over the seat and basket. This three-wheeled walker

Trionic Trek All-Terrain Walker

The Trionic Trek All-Terrain Walker is an all-terrain walker for camping, hunting, or hiking designed for use by individuals with walking, lower extremity, or balance disabilities. The unit has a detachable carrying basket with a zip-pocket and rain cover. The walker is also equipped with a seat. Included is a seat bag that snaps onto the seat, and folds forward for sitting. This bag has three separate inner compartments, one zippered outer compartment, and two mesh pockets. A top elastic cord h

Tsunami Al

The Tsunami AL is a lightweight adult wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of 6061-T6 aircraft aluminum. It is available in two optional versions – Heavy Duty and Transit System. The frame is available with no rear adjustment or 0.5-inch rear adjustment, and optional versions of the frame allow for adjustments of 1, 2 and 3 inches. The frame can be ordered with the center of

Tsunami Alx

The Tsunami ALX is a lightweight adult wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is made of 7000 series tubing. The frame features center of gravity (CG) adjustment over a 1.75-inch range for amputee positions and 2.7-inch range for standard positions, both in 0.25-inch increments. The frame is also available in a Heavy Duty version. Various frame colors and finishes are available, and rear anti

Tuffy Deluxe Wide Recliner 497 (Models 497E & 497Xe)

The Tuffy Deluxe Wide Recliner 497 is a manual reclining wheelchair with a manual reclining back designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 497E model, this wheelchair comes in a wide (XE) version. FRAME (HxLxW): 42 (with seat back upright) x 50.5 x 30 or 32 inches. Folded dimensions (LxW) are 37 x 12 inches. The folding frame comes standard with double cross bar construction and reinforcement w

Tuffy Extra Wide 377 (Models 377, 377A, 377Ae, 377E, 377W, 377We, 377X, 377Xe)

The Tuffy Extra Wide 377 is a heavy duty, folding manual wheelchair designed for use by large adults with lower extremity, mobility or neurological disabilities or spinal cord injury. FRAME (HxLxW): 37.75 x 42 or 44 x 26, 28, 30 or 32 inches. This chair has triple chrome plated steel folding frame with stainless steel side panels. Double cross bar construction and reinforcement welds that strengthen design are standard. The folded dimensions (LxW) are 32 x 12 inches. Anti-tippers and an anti-fol

Tuffy Recliner 477 (Models 477E, 477Ne, & 477We)

The Tuffy Recliner 477 is a manual, heavy-duty, reclining wheelchair with a manual reclining back designed for use by large adults with lower extremity, mobility, severe physical, or neurological disabilities or spinal cord injury. In addition to the standard 477E model, this wheelchair comes in narrow (NE) and wide (WE) versions. FRAME (HxLxW): 42 (with seat back upright) x 48 x 24, 26 or 28 inches. The triple chrome-plated frame folds; the folded dimensions (LxW) are 34 x 12 inches. Anti-tippe

Tunturi Cycle Ergometer (Model E80)

Tunturi Cycle Ergometer, model E80, is a bicycle exerciser designed for use by individuals with lower extremity disabilities. This exerciser can be used for rehabilitation or fitness testing. Cycling effort can adjusted through a wide range. The system comes with constant heart rate, effort and resistance programs, and a multi-step condition test. User profiles, including time, distance, energy consumption, speed, heart rate, and effort, are displayed in full-color graphics. Up to four users can

Ultra Comfort Wheelchair Cushion

The Ultra Comfort Wheelchair Cushion is a gel and foam seat cushion designed for use by individuals with mobility disabilities. This cushion has a gel-like inner core. The top of the cushion is made of anti-microbial fabric and the bottom half is made of nylon pack cloth. A built-in fabric handle aids in carrying. DIMENSIONS: 17.5 x 18.5 x 2 inches. CAPACITY: 325 pounds.

Ultra Sling

The Ultra Sling is a bariatric transfer lift sling designed for use by large individuals with spinal cord injury or mobility, lower extremity, or severe physical disabilities. This sling is made of polyester with reinforced legs. SIZES: Short, medium, and long. CAPACITY: 400 pounds.

Universal Bath Bench

The Universal Bath Bench is a bath seat designed for use by individuals with mobility and balance disabilities. Available with or without a back, the seat fits in most tubs and shower stalls and can be assembled without tools. A smooth-edge notch on the seat provides placement for a hand-held shower (not included). The all-plastic frame eliminates rusting and the height adjusts by turning the leg base. DIMENSIONS (HxDxW): 17.5 x 18 x 21 inches without back; 29.5 x 18 x 21 inches with back. The

Universal Inside Lift (Model Al200)

The Universal Inside Lift, model AL200, is a wheelchair or scooter van loader designed for use by individuals with mobility disabilities or spinal cord injury. This is a heavy-duty lifter for heavier scooters and wheelchairs. It has an adjustable base that fits most vehicles on either side, and it disassembles into three components for stowage. It has a boom range of 360 degrees. POWER: Powered by the supplied electrical harness. The harness has full-length leads that attach directly to the bat

Universal Power Chair Lift (Model Al500)

The Universal Power Chair Lift, model AL500, is a hitch-mounted wheelchair carrier designed for use by individuals with mobility disabilities or spinal cord injury. This outside chair lift has an aluminum deck and automatic tensioners. It works on a Class II hitch-equipped vehicle with a hitch from 5 to 19 inches high, and supports power chairs with a maximum width of 28.5 inches. POWER: Uses battery and supplied electrical harness with full-length leads that attach directly to the battery. OPTI

Universal Scooter Lift (Model Al100)

The Universal Scooter Lift, model AL100, is a hitch-mounted scooter carrier designed for use by individuals with mobility disaabilities. This outside scooter lift works with any Class II hitch-equipped vehicle with a hitch from 5 to 19 inches high, and can support a scooter with a maximum width of 28.5 inches and a maximum wheelbase of 42 inches measured from the hub (center) of the front tire to the hub of the rear tire. The deck automatically folds up, out of the way, when empty. OPTIONS: A Sw

Up N' Go (Adult And Bariatric)

The Up n' Go is a walker with lifter and gait trainer designed for use by adults with cerebral palsy, brain injury, or neurological, lower extremity, or walking disabilities. This unit consists of a mobility unit which is a wheeled walking frame with a wide U-shaped base with four casters, a suspension unit, and gas springs. The suspension unit is a carefully-designed harness that is designed to be comfortable to wear while sitting or standing and to be easy to put on or take off. The back side

Upeasy Seat Assist (Models Upe 1 & Upe 3)

The UPEASY Seat Assist converts any chair to a seat lift chair for use by individuals with neurological, lower extremity, or mobility disabilities or arthritis who have difficulty rising from a seated position. The cushion is placed on any chair and when the user sits on it, it gently lowers the user to a seated position. To rise, as the user begins to shift weight to rise, the seat automatically provides a supported, stable horizontal assist, lifting 80 percent of the user's weight. This cushio

Uplift Seat Assist (Models Med-Ul 100 & Med-Ul 300)

The Uplift Seat Assist, models MED-UL100 and MED-UL300, is a seat cushion with lift that converts any chair to a seat lift chair for use by individuals with neurological, lower extremity, or mobility disabilities or arthritis who have difficulty rising from a seated position. The cushion is placed on any chair and the selector is set to the weight of the user. As the user begins to shift weight to rise, the seat automatically provides a supported, stable horizontal assist, lifting 80 percent of

Uppingham Combined Mobile Commode & Shower Chair (Model 172)

The Uppingham Combined Mobile Commode and Shower Chair, model 172, is a commode and shower chair designed for use by individuals with balance, lower extremity and mobility disabilities. Made of plastic coated steel tubing, this combination commode and shower chair features a polyurethane cellular molded gap front seat, back rest, over-seat padded hinged armrest, pushing handle and four braked castors. It has a detachable footrest with two height positions. The footrest clips to the frame and is

Versabathseat

The VersaBathSeat is a bath seat designed for use by individuals with mobility disabilities. The unit is adjustable and clamps to most bathtubs, locking with a large adjustment knob. The seat rotates 90 degrees to accommodate both right and left entry and enabling the user to sit on the seat outside the tub and rotate to enter; the process is reversed for exiting the tub. Handles on each side of the seat aid in transfers. This lightweight unit folds for transport and storage. OPTIONS: Hygenic sp

Victory 10 3-Wheel Scooter (Model Sc610)

The Victory 10 3-Wheel Scooter, model SC610, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 45.25 x 22.25 inches. The turning radius is 42 inches and the ground clearance is 3 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering.

Victory 10 4-Wheel Scooter (Model Sc710)

The Victory 10 4-Wheel Scooter, model SC710, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 47x 22.25 inches. The turning radius is 54 inches and the ground clearance is 3 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering. OPTI

Victory Wheelchair

The Victory Wheelchair is a lightweight manual wheelchair designed for use by children or adults with lower extremity or mobility disabilities or spinal cord injury. FRAME: Folding aluminum alloy frame made with high pressure castings and with no welded joints. Other features include modular design, double 'X' cross brace, ABS plastic side plates, and swing out anti-tips. Options include shopping basket or school tray. SEAT (LxW): 10 x 10, 13.75 x 14, 15.75 x 15, 16.5 x 16, 16.7 x 17, 17.7 x 18,

Vita

The Vita is a 4-wheeled electric scooter designed for outdoor use by individuals with lower extremity and mobility disabilities. FRAME (LxWxH): 55.5 x 28 x 55 inches. The Vita has full independent suspension, an underbody ground clearance of 3.5 inches, and a turning radius of 50.5 inches. Available color is sunset orange with sparkles or silver. An optional black wire basket that attaches behind the seat is available, and a black, heavy-duty travel case can be added in place of the basket.. CON

Voyager Spa Lift

The Voyager Spa Lift is a powered lift designed for use by individuals with mobility disabilities or spinal cord injury. This lift is designed for use by passengers who need a lift to safely enter and exit spa facilities aboard ship and it can be operated by either the user or an attendant. The lift is made of corrosion-proof materials and it comes with a waterproof hand control and handheld fresh water rinse. OPTIONS: The lift can be configured to adapt to a ship's specific spa design. POWER: U

Wenzelite Adult Anterior Safety Walker (Model Ce 1000 B/bk & Ce 1000 Nbl)

The Wenzelite Adult Anterior Safety Walker, models CE 1000 B/BK & CE 1000 NBL, are folding height adjustable, wheeled walkers designed for use by individuals with mobility disabilities. FRAME: Square steel tubing with welded joints, handlebars, and a powder-coat finish in a choice of colors. BRAKES: The breaking mechanism is activated by applying pressure to the handlebars. An optional Dial-A-Speed knob allows adjustable resistance on one or both rear wheels for greater speed control. WHEELS

Wenzelite Bariatric Anterior Safety Rollers (Models Ce 1000 Xl & Ce Obese Xl)

The Wenzelite Bariatric Anterior Safety Roller is a folding height-adjustable wheeled walker designed for use by large or obese people with mobility disabilities. FRAME: Square steel tubing with welded joints, handlebars, and a powder-coat finish in a choice of colors. BRAKES: The breaking mechanism is activated by applying pressure to the handlebars. An optional Dial-A-Speed knob allows adjustable resistance on one or both rear wheels for greater speed control. WHEELS: Four easy-roll ball bear

Wheeled Shopping Walker

The Wheeled Shopping Walker is a folding wheeled walker with seat designed for use by individuals with walking and balance disabilities. This walker features four large wheels, height-adjustable handles with hand brakes, a large basket, and removable clear tray. The walker folds for storage and transport. DIMENSIONS: The handle height adjusts from 30 3/8 inches to 39 1/8 inches. CAPACITY: 350 pounds.

Whirlpool Table (Model 2175)

The Whirlpool Table, model 2175, is designed for use in hydrotherapy. This table has a high- pressure laminated top with a cut-out and combo seats on both sides. Made of solid hardwood, it has bumper tee-molded edges and H-brace construction. The legs are triple bolted with leveling glides. All surfaces are coated for protection against moisture, and the tank side of the table top frame is covered with ABS plastic. This table is available for use with tanks up to 36 inches high. DIMENSIONS (HxLx

Wizard, The (Model W2000)

The Wizard, model W2000, is a height-adjustable rollator-style folding wheeled walker with seat designed for use by individuals with walking or balance disabilities. This walker has a wide base for stability and features a padded, flip-up hinged seat; a backrest; four mag wheels with ball bearings and flat-free tires; a clear tray; and a large storage basket under the seat. The unit is equipped with loop brakes and a safety brake on the handle bars. DIMENSIONS: The seat height is 23.25 inches an

Wrangler (Model Pmv 600)

The Wrangler (Model PMV 600) is an all-terrain four-wheeled scooter designed specifically for outdoor use by people with physical disabilities or limited mobility. FRAME (LxW): 63.5 x 31 inches with a turning radius of 77 inches, and ground clearance is 7 inches. This scooter features fenders, an open base, and a covered battery area and is available in viper blue or candy apple red. CONTROLS: Finger-tip controls are located on the adjustable tiller with an on/off key. RWD: Two in-line gear moto

Parent Category: Universal
 
Processing...


Driving Walking/Biking Public Transit  Get Directions