Van Accessories

Results: 118

Abiloader-Fo

The AbiLoader-FO is a wheelchair loader for car, pickup truck, sport utility vehicle and van designed for use by people with lower extremity or mobility disabilities, spinal cord injury and other who use wheelchairs. It is intended for use with folding wheelchairs. The device is installed in the trunk or rear storage area of a vehicle into which the folded wheelchair will fit. The AbiLoader-FO has a robotic arm with two actuators and a mechanism to grab and hold a wheelchair. There is a third ac

Abiloader-Fx

The AbiLoader-FX is a wheelchair loader for car, pickup truck, sport utility vehicle and van designed for use by people with lower extremity or mobility disabilities, spinal cord injury and other who use wheelchairs. It is intended for use with wheelchairs with fixed frames that do not fold. The device is installed in the trunk or rear storage area of a vehicle into which the folded wheelchair will fit. The AbiLoader-FX has a robotic arm with two actuators and a mechanism to grab and hold a whee

Alumilite Folding Curb Ramp

The Alumilite Folding Curb Ramp is a portable ramp designed to provide access over curbs or steps or in and out of vans for wheelchair users. The ramp folds in half for carrying and comes with a handle and closing strap. The ramp is made of welded aluminum with a permanent non-skid surface that is integral to the aluminum and cannot tear or wear off. DIMENSIONS (LxW): 3, 4, 5, or 6 feet x 29 or 36 inches (open) and 15 or 18 inches (closed). WEIGHT: 18 to 41 pounds depending on size. CAPACITY: 60

Ameriglide Side Door Drive-Thru Lift 275

The Side Door Drive-Thru Lift 275 is a wheelchair or scooter platform lift designed for use by individuals with mobility disabilities. The lift installs on second row seating harware, so the power chair or scooter can be delivered near the passenger or driver's door making it more convenient to move from mobility device to vehicle and back. When the lift is in operation, a platform extends out on rails from inside the vehicle until it clears the side. From there, the platform lowers to the groun

Ameriglide Universal 250 Lift

The AmeriGlide Universal 250 is a automobile or sport utility vehicle (SUV) lift for smaller electric wheelchairs and scooters. It is an internal vehicle lift that allows the scooter or power chair to be stored inside the user's automobile. The lift has an integrated offset post to help clear the vehicle's bumper, and its base is adjustable to better match the vehicle's dimensions. Its telescoping boom rotates manually, with adjustable length and pitch to allow the user to attach the lifting str

Amigo Lift-It

The Amigo Lift-It is an electric, hitch-mounted wheelchair/scooter loader with a built-in control designed for use by individuals with mobility disabilities. The lift is designed to be installed on cars, vans, or trucks with Class II or III receiver hitches and swing-away or hatch-type doors (fold-down tailgates not compatible). No permanent installation is required, and the lift is fully transferable between vehicles. The Lift-It disassembles into four lightweight components when not in use so

Automatic Power Chair Lift (Model Al550)

The Automatic Power Chair Lift, model AL550, is a platform van lift designed for use by individuals with mobility disabilities or spinal cord injury. The lift's docking station features a self-aligning base, enabling the user to drive onto the platform and be locked in place. An audible latching sound is heard as the chair's pin passes into the locking mechanism, and attempting to back the chair verifies that the latch is locked. The docking base also includes a bright colored indicator pin to c

Automatic Van Door Opener (Model V6)

Automatic van door opener operates from switches inside and outside of van. Opens side sliding door. 12 volt DC motor utilizes existing van battery.

Automatic Wheelchair Lock

The Automatic Wheelchair Lock is a wheelchair restraint system for use by people with lower extremity or mobility disabilities, spinal cord injury and others who use a wheelchair. The user can roll forward into the Automatic Wheelchair Lock, which provides a stationary and stable position for a wheelchair during travel. The anchor post for the system mounts to the floor of the vehicle. The restraint bolts to post and hooks to frame of wheelchair. It automatically unlocks at touch of the device's

Basement Motorhome Lift (Model 129)

The Basement Motorhome Lift, model 129, is a wheelchair lift without a platform for use on high floor motorhomes and buses with a floor height between 34 and 51 inches. Instead of a platform to support the chair, manual and powered wheelchairs and their occupants are raised and lowered by means of a pivoting arm and a vertical track. The lift requires only 9.5 inches of wall space inside. The lift will not interfere with other people entering the vehicle. Chains with webbed strapping attach onto

Baylift

BayLift is a bus lift designed for use by individuals with mobility disabilities. This compact lift is contained in an enclosure in the luggage bay of the bus. Constructed of steel, the system uses an electro-hydraulic lift with manual backup (hand pump for up, pressure release valve for down). DIMENSIONS (HxLxW): Enclosure is 37 x 18 x 38 inches. Maximum usable platform area is 48 inches long x 29 inches wide. Maximum floor to ground travel is 62 inches. CAPACITY: 600 pounds. WEIGHT: 590 pound

Braun Built Automatic Swing Door Operators For Rear Post Swing-A-Way Lift

Door operator package to work with swing doors in vans with the rear post Swing-A-Way lift (Chevy and Ford full size vans only). Sequenced to operate with one switch and uses the same peripheral controls as other Braun lifts. Quick release mechanism to freely open the doors in the event of a power failure.

C-Dock

The C-Dock is a wheelchair securement system designed for use by individuals with mobility disabilities or spinal cord injury traveling in vans. This one-piece floor bracket makes the system service friendly. It is equipped with a stainless steel top plate that attaches to the docking unit, providing sturdy protection and stay-open-jaws that provide unlimited exit time. Other features include jam-free latch parts and intuitive interfaces to keep users informed and in control. This device attach

Cargo Wedge 250

The Cargo Wedge 250 is a cargo area threshold cover designed for use by people with mobility disabilities who use wheelchairs or scooters. The Cargo Wedge is a large mat made of recycled rubber that overlays a van's or minivan's cargo area to raise the level of the cargo area's floor to the same level as the rear door threshold. The Cargo Wedge can be trimmed with a utility knife or a power saw for a custom fit. It has a non-skid surface. DIMENSIONS (HxLxW): 2.5 x 24 x 48 inches. CAPACITY: 850 p

Companion Seat

The Companion Seat is an adjustable position van seat designed for use by individuals with mobility disabilities. Designed for use with the front passenger seat of Chrysler Town & Country, Dodge Caravan, Plymouth Voyager, and Ford Windstar minivan's, this unit utilizes the van's existing seat but replaces the seat base with a powered seat base. The powered seat base extends the seat a full 20 inches out from the standard seat location and tilts it 6 inches forward. To enter the van, the seat

Decpac Multipurpose Ramp (Model Mp44)

The Decpac Multipurpose Ramp, model MP44, is a portable ramp designed for use to provide access to vans or steps for individuals with mobility or lower extremity disabilities or spinal cord injury. This four-panel folding ramp can be used for a rise up to 13 inches over steps at home or to enter the side of a minivan. When folded it can fit into a van and slide under a seat. The ramp is constructed from laminated fiberglass. The top surface has a textured non-slip tread and the edges are marked

Decpac Multipurpose Ramp With Edge Barrier (Model Mpeb44 )

The Decpac Multipurpose Ramp with Edge Barrier, model MPEB44, is a ramp designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. It is a four-panel folding ramp with side barriers to help keep a wheelchair, scooter or stroller on the ramp. This ramp can be used for entryways with steps or to enter or exit a minivan on the side. The ramp can be used for a rise up to 13 inches. When folded the ramp can fit in a van and slide under a seat. The ramp is mad

Decpac Multipurpose Ramp With Edge Barrier (Model Mpeb55)

The Decpac Multipurpose Ramp with Edge Barrier, model MPEB55, is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This collapsible four panel ramp can fit a rise of up to 16 inches. It fits in the side of a minivan, but when folded is compact enough to store under the seat of the van. Constructed from laminated fiberglass. its top surface has a textured non-slip tread and the edges are marked with a caution stripe. The top edge

Decpac Multipurpose Ramp With Edge Barrier (Model Mpeb66)

The Decpac Multipurpose Ramp with Edge Barrier, model MPEB66, is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This ramp can accommodate a rise of up to 20 inches, and it can be used for van access. Constructed from laminated fiberglass, its top surface has a textured non-slip tread and the edges are marked with a red caution stripe. Edge barriers are included for safety. The top edge is indicated with a label and it has a th

Drive Master Drop Floor (Models V10Bf & V10B3)

Drop floor in van permanently lowers floor of van 4 to 6 inches for the width of the van and from the side or back door of van into driving and/ or passenger area. This provides proper visibility for wheelchair occupant whose head is more than 47 inches from floor when seated. This van modification requires structural modification to van; chassis of van is cut and reinforced. Not available for Dodge vans.

Drive Master Fill In Passenger Step Of Van (Model V10D)

Fill in of passenger step of van provides levels surface for movement of occupant in wheelchair. If step is not filled in and wheelchair moves over it, chair will tip over.

Drive Master Interchangeable Driver Or Passenger Seat (Model V17)

Quick release seat for van allows seat to be put in place for use by driver other than wheelchair occupant. Change of seats done by able bodied person. Seat provided with storage lock for back part of van. Seat can be used in stored position as well as in driver or passenger position. Easy to move by rolling on casters.

Drive Master Power Floor Pan (Models V10A1F & V10A2C)

Specially designed elevator in driver area to accommodate wheelchairs, will lower floor up to 6 inches to allow complete peripheral vision while driving. Available for Chevrolet and Ford sized vans. Designed for people to drive from their wheelchairs.

Drive Master Swinger Lift (Model V1A1)

Fully automatic rotary lift; operates from switches on chest high security rail with optional switches on van console or outside switch box; automatic safety stop; constructed of aluminum and steel; operates from van battery; requires less than 3 feet outside clearance. Dimensions of lift at largest point are 24 by 34 inches. Lift can be used on side of van only. Safety backup system. VA accepted.

Drive Master V30 Custom Switch Location

Custom switch location according to needs of client. Toggle and some push/pull switches available. All switches necessary for driving can be custom positioned if needed.

Drive Master V33 Raised Side Door Opening

Raised van door facilitates accommodation of wheelchair user who is very tall or who has limited movement. White fiberglass to match Drive Master Raised Roof (see separate entry). Sizes for full, mid size and sport top offer 57 inches of head clearance for full and mid size, 53 inches for sport top.

Easy Reach

The Easy-Reach is a van lift designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This lift seat allows the original seat of a truck, SUV, van, or minivan to swivel out of the vehicle and lower to wheelchair height. The user then transfers from the chair to the vehicle seat, and presses a button to be lifted into the vehicle. The lift extends from the vehicle at an angle matching that of the door. A manual back-up system in case of vehicle power fa

Electric Holdown (Model 128)

The Electric Holdown, model 128, is wheelchair restraint system that may be installed for the driver or passenger wheelchair position. (Installation depends on the underside of the van.) The holdown consists of two pieces: one piece hooks to the wheelchair frame behind the casters, and the second mounts into the floor of the van. The floor mounted piece clamps onto the piece attached to the chair. The control switch mounts to the vehicle's dashboard or the most convenient position for the operat

Ez Lock

Floor mounted wheelchair restraint system secures wheelchair to floor of van. V.A. accepted. Enables user to sit forward facing or in an angled position in van. Wheelchairs can be rolled into the receiver lock mechanism by backing in or by forward entry. Safety warning signal will sound when vehicle is running while the lock is not fully set. Available with many different "H" bracket configurations to fit most manual and powered wheelchairs on the market. Warranty available.

Ez-Access Suitcase Advantage Series Ramp (Models As2, As3, As4, As5 & As6)

The EZ-ACCESS SUITCASE Advantage Series Ramp are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface with reflective stripes on each side of the surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to enter some minivans (models AS5 and AS6) and sport utility vehicles (AS

Ez-Access Suitcase Ramp (Models 2, 3, 4, 5 & 6)

The EZ-ACCESS SUITCASE Ramp is a portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. Th1s ramp is made of aluminum and features an non-skid driving surface. The ramp is designed for use over curbs and steps and to enter some minivans (models 5 and 6) and sport utility vehicles (model 6 only). Each ramp has a fold-in-half design for compact portability, and a built-in carrying handle. DIMENSIONS (LxW): 24 x 29 inches (model 2); 36 x 29 inches

Ez-Access Suitcase Signature Series Ramp (Models Ss2, Ss3, Ss4, Ss5, Ss6, Ss7 & Ss8)

The EZ-ACCESS SUITCASE Signature Series Ramps are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to with some minivans, vans and sport utility vehicles. Each ramp divides into two halves by removing two hinge pins, and whe

Ez-Access Trifold Advantage Series Ramp (Models As5, As6, As7, As8 & As10)

The EZ-Access Trifold Advantage Series Ramp is a portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface with reflective stripes on each side of the surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to enter some minivans and sport utility vehicles. Each ramp divides into

Flex-Ramp

The Flex-Ramp is a van ramp designed for use by individuals with mobility disabilities. This lightweight aluminum ramp converts a mini-van or full-size van into a wheelchair-accessible vehicle. The ramp is attached to the floor of the vehicle and extended outward when the door is opened. It can also be detached from the floor and moved to another location such as a curb or steps. OPTIONS: Two wheel cart for transporting ramp. SIZES: Mini-van, full-sized van, or extra capacity. DIMENSIONS (LxW):

Front And Rear Post Swing-A-Way Lifts

Fully automatic rotary lift moves platform from the van interior to the ground. The post features a gravity down operation and can be ordered for the front or rear side of the door opening. With the front post the wheelchair is loaded facing the front of the van, with the rear post the wheelchair is loaded facing the rear of the van. Hand pump for emergency backup system. Platform size: 29 3/4 inches wide by 35 inches long. Fits full size Ford and Chevy slide door or swing door vans, and full si

Fully Automatic Hydraulic Folding Lift (Models V1B1 & V1B2)

Fully automatic electric or hydraulic folding side or rear mounted van lift. Automatic safety stop. Operates from van battery. Emergency backup system included.

Fully Automatic Mini Van Lift-A-Way Lifts

Platform van lift with welded steel construction and fully automatic operation. Built in handrail. Lift models to fit most side slide doors on domestic and imported minivans and double rear doors on some domestic minivans. Box frame construction provides rigidity without relying on vehicle side wall strength. Hydraulic pump for quiet operation. Roll-stop on front of platform. Circuit breaker protects against electrical overload. Optional control box may be mounted outside the vehicle for conveni

Fully Automatic Van Lifts (L100 & L400 Series)

Platform van lift with welded steel construction and fully automatic operation. Built in handrail. Lift has models to fit most side slide, side double, and rear van and commercial vehicle doors. Box frame construction provides rigidity without relying on the vehicle side wall strength. Hydraulic pump provides quiet operation. Roll-stop on front of platform. Circuit breaker protects against electrical overload. Optional control box may be mounted outside the vehicle for convenience. Lift models p

Gateway Ai

Gateway AI is a van lift safety lock designed for use by individuals with mobility disabilities. This product combines the Intelligent Lift Interlock System (see separate entry), which automatically prevents lift operation while the vehicle is unsecured, with the Advanced Fast Idle System (AFIS), which automatically increases engine speed when the vehicle voltage drops below 11.5 volts and the vehicle is in Park with the parking brake set. AFIS enables the vehicle's charging system to provide mo

Glide 'n Go Transfer Seat Bifold

The Glide æn Go Transfer Seat Bifold is a powered transfer seat designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This flip-down power lift seat raises the user from a wheelchair to vehicle seat level to enable the user to enter and exit an extended cab pickup truck. The system is operated by unfolding the safety arm and pressing the ôupö button. No structural modifications or holes are required for installation. The foldaway seat design allows

Glide 'n Go Transfer Seat Single-Fold

The Glide æn Go Transfer Seat Single-Fold is a powered transfer seat designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This power lift seat works with full- or mid-size SUVs, minivans, or short cab pickup trucks. The system is operated by unfolding the safety arm and pressing the ôupö button. No structural modifications or holes are required for installation. The lift works on either the driver or passenger side in the first or second row of sea

Handiramp Van Ramp System Series

The HandiRamp Van Ramp System Series are van ramps designed for use to provide access to vans and mini-vans. The system is mounted with a 3-bolt installation. Ramps are made from either aluminum or expanded metal with non-skid tread ways and wheel guides. All ramps in the series are equipped with spring assisted lifting, and fold up vertically inside the van door to conserve passenger space. OPTIONS: Floor mount; step well mount. DIMENSIONS: 5, 6.5, 7, or 8 feet long. Aluminum ramps are not avai

Hercules (Models 2000 & 3000)

Hercules, model 2000 and 3000 is a trunk mounted scooter loader or van lift designed to lift scooters into vans or car trunks. These lifts feature an aluminized bronze sprocket that is non-corrosive and stronger than most steel. The sprocket assembly creates a four-to-one gear ratio for increased lifting capacity and the assembly is supported by a haf-inch steel shaft and needle bearing. The gearbox location allows greater height clearance and a low center of gravity provides ease in handling. T

Hitch Mounted Ramp

The Mounted Ramp is designed for use by individuals who use powered wheelchairs or scooters. This ramp enables users to load a power chair or scooter into the back of vehicles equipped with a rear hatch or barn-style doors, such as SUVs (sport utility vehicles)and minivans. The universal design is compatible with all lift-gate equipped vehicles and connects to a Class I, II or III trailer hitch with no drilling. This ramp requires only 15 pounds of force to operate. The non-skid metal surface is

Homemade Van Ramp.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Wheelchair ramp for a van. Describes a wheelchair ramp made of strong 1/4 inch aluminum channel irons and angle cross pieces from a boat manufacturing plant. The runners are made of two 45 inch sections each, hinged together with barn door hinges. Shallow steps are built between the runners, and covered with indoor-outdoor carpeting. Includes photographs. COMMENTS: Developed by Harley Karvonen of Perham, Minnesota. SKILLS REQUIRED: Metalworking. Woodwo

Intelligent Lift Interlock System (Ilis)

The Intelligent Lift Interlock System (ILIS) is a van lift saftey lock designed for use by individuals with mobility disabilities. This solid-state, microprocessor-controlled unit automatically prevents lift operation while the vehicle is unsecured and prevents driving the vehicle with the parking brake left on. A dash-mounted LED panel displays system and sub-system status. An Intermittent Fault Filter (IFF) filters out erroneous changes in sensor signals, and the system performs self-diagnosti

Lectra Aid Person Van Lift

Platform van lift. Dropped swing arm bracket with chair attaches with bolts to door post. Aluminum. Weight approximately 38 pounds. Operates off 12 volt vehicle battery. Seat dimensions 18 by 18 inches. Seat has non-slip neoprene cover. Custom lifts available.

Literamp Portable 1-Piece Wheelchair Ramp

The LiteRamp Portable 1-Piece Wheelchair Ramp is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury or others who use a wheelchair or scooter. The ramp has carrying handles, folds in the middle, and can be carried like a suitcase. It is made from aircraft aluminum, and it is fully covered with safety non-skid tape. This ramp is weather resistant so it can be left outdoor year-round. It is self-supporting to prevent slippage on sta

Literamp Portable 2-Piece Wheelchair Ramp

The LiteRamp Portable 2-Piece Wheelchair Ramp is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. The ramp can be taken apart into two separate pieces side by side. Each piece folds length-wise and has two handles so it can be carried like a suitcase. The ramp can accommodate 3-wheel scooters as well as manual or electric wheelchairs. It can be used on curbs, decks, and steps; on side doors of vans; on back doors of most vans an

Manual Bi-Fold Van Ramp (Models Mf-26, Mf-30 & Mf-36)

The Manual Bi-Fold Van Ramp, models MF-26, MF-30 and MF-36, is a van ramp designed for use by individuals with mobility disabilities or spinal cord injury. Constructed from 6061 Aerospace-grade aluminum, the ramp installs in a van to provide wheelchair access. The ramp is also available as a twin track pair. DIMENSIONS (LxW): 72 x 26 inches (MF-26) 96 x 30 inches (MF-30), or 96 x 36 inches (MF-36). Twin tracks are 12 inches wide.

Micro Inside Lift (Model Al055)

The Micro Inside Lift, model AL055, is a van lift without platform designed for use by individuals with mobility disabilities or spinal cord injury. This powered lift uses a boom with manual rotation to lift the lightweight wheelchair or travel scooter and can be used with vans, SUVs or the trunk of most cars. Docking devices are available to accommodate smaller scooters and chairs. The boom has a range of 360 degrees. DIMENSIONS: The lift requires 37 inches of headroom, but may be modified for

Millennium Series Lift

The Millennium Series Lift is a platform van lift designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This fully hydraulic lift is designed for installation in the side or rear door of a full-size van. It has a hand-held control and on-lift controls mounted on an arm that extends from the lift frame; a remote control is optional. The Millennium Series also features a manual backup system; an outboard roll top that engages in the fully up position

Mirage Transit

Mirage Transit is a bus lift designed for use by individuals with mobility disabilities. Constructed of steel and aluminum, this underfloor lift stows away in an enclosure beneath the vehicle floor when not in use, leaving the doorway clear. The enclosure also protects the lift from rain, snow, and dirt. The lift raises, lowers, stows and deploys at the touch of a button, using hydraulic power provided by a remotely located hydraulic Power Pak. Manual backup is standard. POWER: Hydraulic Power P

Motorhome Lift (Model 124)

The Motorhome Lift, model 124, is a mobile homelift designed for use by individuals with mobility disabilities or spinal cord injury. This steel lift is designed without a platform and operated by suspending the wheelchair and the user from a vertically pivoting arm. The arm pivots down to attach to the occupied wheelchair, then lifts the occupant and chair into the motorhome. Permanently attached nylon webbing attach chair to the arm of the lift (permanent, detachable or temporary visitor hooku

Multi-Lift

The Multi-Lift is a powered sling transfer lift designed for use by individuals with mobility disabilities. This portable lift can be used to transfer the user into or out of a car or other vehicle, or to or from a bed, sofa, toilet, or bath. It can also be used to lift a scooter or power wheelchair into a station wagon or minivan. It comes powder coat painted finish is standard and a wide variety of slings is offered. POWER: Uses 12v/25A Surge, 20A Continuous. OPTIONS: Home wall mount, home f

Multifold Ramp (Models Wcr530, Wcr630, Wcr730, Wcr830, Wcr1030, & Wcr1230)

The Multifold Ramp is a portable ramp designed to provide wheelchair or scooter access over steps and curbs or into full-sized vans and minivans. This aluminum ramp is hinged to fold in several places for transport. Ramps feature auto-locking and a suitcase-style carrying handle. The ramp is surfaced with anti-slip, high-traction safety tape. DIMENSIONS: Unfolded ramps are 30 inches wide and 5 feet (WCR530), 6 feet (WCR630), 7 feet (WCR730), 8 feet (WCR830), 10 feet (WCR1030), or 12 feet (WCR123

Passenger Position Wheelchair Lock

The Passenger Position Wheelchair Lock is a wheelchair restraint system to secure a wheelchair in moving vehicle. It is attached by an attendant who locks the chair to tracks in the floor with four ratchet-tightened straps. Seat shoulder belts required.

Permolock C

The Permolock C is a wheelchair restraint system designed for people with mobility disabilities or spinal cord injury who use the Permobil C400 or C500 power wheelchairs (see separate entries). The Permolock C consists of a locking plate that is mounted on the floor of the vehicle and a spring-loaded pin attached to the wheelchair base. The wheelchair equipped with the pin approaches the locking base from the rear with pin aligned with a slot in the center of the top of the plate. A control bu

Permolock C3

The Permolock C3 is a wheelchair restraint system designed for people with mobility disabilities or spinal cord injury who use the Permobil C300, C350, K300 or K450 power wheelchairs (see separate entries). The Permolock C3 consists of a locking plate that is mounted on the floor of the vehicle and two spring-loaded pins attached to the wheelchair base. The wheelchair equipped with the pins approaches the locking base from the rear with pins aligned to two slots in the top of the plate. The pins

Person Lift

Mobile home lift with chair and step. Skid resistant platform lift attaches to side of recreational vehicle. Standard 48 inch lift travels 40 inches and lifts up to 250 pounds. Lift tube dimensions: 50 inches high by 2.25 inches in diameter. Platform removes for storage. Platform weight: 20 pounds. Platform dimensions 2 inches by 13 inches by 16 inches. Chair lift component of system: seated person is raised and swings into recreational vehicle using double hinged bracket. Aluminum chair removes

Pilot Lift

The Pilot Lift is an exterior seat lift designed to adapt to a variety of transportation and mobility applications. It features three-way directional movement that allows comfortable access to a full 360 degrees and a compact mounting system. The user has easy control of the lift from a hand-held control. The lift has a variety of applications including farm tractors and harvesters, small lawn tractors, pick-up trucks, airplanes and boats. There are three different variations of the Pilot Lift.

Pioneer Hybrid Platform Lift (Model Al600)

The Pioneer Hybrid Platform Lift, model AL600, is a platform van lift designed for use by individuals with mobility disabilities or spinal cord injury. This device can lift a power wheelchair or scooter into the back of most SUVs, vans, or minivans. Features include a four-point universal securement system, and remote hand controls. The lift can be installed using existing third-row seating mounts as well as in vans without a third row. POWER: Uses battery and supplied electrical harness with fu

Platform Van Lift

Van lift mounts outside rear door. For individual who does not drive, but needs assistance entering and exiting van. Features nonskid surface platform. Requires manual folding and unfolding of platform. Control push button to raise and lower platform. Fits Chevrolet, Ford and Dodge vans. CAPACITY: 700 pounds. DIMENSIONS: Platform size is 45 inches long, 55 inches wide.

Power Bi-Fold Van Ramp (Models Mf1, Mf1-R, Af1, & Af1-R)

The Power Bi-Fold Van Ramp, models MF1, MF1-R, AF1, and AF1-R, is a van ramp designed for use by individuals with mobility disabilities or spinal cord injury. Made from 6061 Aerospace-grade aluminum , this power bi-fold ramp installs in an existing van, and is available with a wireless remote (MF1-R, AF1-R). DIMENSIONS: 72 x 26 inches (MF1, MF1-R) or 96 x 30 inches (AF1, AF1-R). CAPACITY: 1000 pounds.

Power Door Operator

Electric powered door opener for full-size vans with sliding doors. Includes separate door locking mechanism to draw door tight into body. Kit includes switches and wiring for inside and outside locations. Compatible with Electro Van Lift rotary wheelchair lift.

Power Floor Pan

Van floor elevator to accommodate wheelchair driver attaches to floor of van. Will lower floor up to 6 inches with self centering toggle switch. Positions driver for proper visibility and for driving. Does not move horizontally. Individual wheel cups can also be installed in variety of floor locations for permanent positioning of wheelchair in van. For Ford, Chevrolet and Dodge vans.

Power Seat Bases

Electric powered seat bases that move seats into position for transfer to and from wheelchairs. Models available for drivers or passengers. Available with a power swivel.

Power Step

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with muscular dystrophy to enter a camper. A framework was built of square tubing and hinged to the side of the camper. A removable step was built of smaller square tubing. The power step is powered by a 12-volt cable winch. AUTHOR: Wechsler, K. TITLE: Doing It Yourself. JOURNAL: Quest. WEB SITE: http://www.mda.org/publications/Quest/q113diy.html. REF: Vol. 11, No. 3, May/June 2004. PAGES: 3.

Power Transfer Seat Base - 6 Way Scissor (Model 908D)

The Power Transfer Seat Base - 6 Way Scissor, model 908D, is an adjustable position van seat base designed for use by individuals with mobility disabilities or spinal cord injury. This power base enables the driver's side seat in a full size van to move as much as 16 inches horizontally or 8 inches vertically, and to swivel up to 100 degrees. No alteration of the factory seat is required for installation. OPTIONS: Seat base for drop floor full-size van with OEM power or manual seat. DIMENSIONS (

Power Transfer Seat Base - 8 Way Parallel Arm (Model 858D)

The Power Transfer Seat Base - 8 Way Parallel Arm, model 858D, is an adjustable position van seat base designed for use by individuals with mobility disabilities or spinal cord injury. This power base enables the driver's side seat in a full size or mini van to move as much as 16.5 inches horizontally or 5 inches vertically, and to swivel up to 100 degrees. No alteration of the factory seat is required for installation. DIMENSIONS (HxLxW): 8.25 x 30 x 15 inches. CAPACITY: 300 pounds total combin

Power Transfer Seat Base - 8 Way Parallel Arm (Model 858P)

The Power Transfer Seat Base - 8 Way Parallel Arm, model 858P, is an adjustable position van seat base designed for use by individuals with mobility disabilities or spinal cord injury. This power base enables the passenger's side seat in a full size or mini van to move as much as 13.25 inches horizontally or 5 inches vertically, and to swivel up to 180 degrees. No alteration of the factory seat is required for installation. OPTIONS: Special 858P for drop floor full-size van. DIMENSIONS (HxLxW):

Power Transfer Seat Base - 8 Way Scissor (Model 007)

The Power Transfer Seat Base - 8 Way Scissor, model 007, is an adjustable position van seat base designed for use by individuals with mobility disabilities or spinal cord injury. This power base enables the driver's side seat in a full size or mini van to move as much as 16 inches horizontally or 8 inches vertically, and to swivel up to 100 degrees. No alteration of the factory seat is required for installation. This model is available for a full-size van with an EOM power seat, or for a mini or

Power Transfer Seat Base - Power Swivel (Model 977)

The Power Transfer Seat Base - Power Swivel, model 977, is an adjustable position van seat base designed for use by individuals with mobility disabilities or spinal cord injury. This power base enables the driver or passenger side seat in a full size or mini van to swivel up to 100 degrees. No alteration of the factory seat is required for installation. OPTIONS: Power swivel with 6-way power. DIMENSIONS: Height is 1.75 inches with power swivel or 5 5/8 inches with power swivel with 6-way power.

Power Transfer Seat Base - Slide & Swivel (Model 866D)

The Power Transfer Seat Base - Slide & Swivel, model 866, is an adjustable position van seat base designed for use by individuals with mobility disabilities or spinal cord injury. This power base enables the driver's side or passenger's side seat in a full size van to move as much as 11 inches horizontally and to swivel up to 100 degrees (driver's side) or 180 degrees (passenger's side). No alteration of the factory seat is required for installation. DIMENSIONS (HxLxW): 7 x 25 x 13.75 inches

Powered Door Locks (Models V22 & V22A)

Power door locks for front and rear door. One switch unlocks all three. Allows user to open door of vehicle at touch of switch control. User must have enough strength to push switch.

Powerlift

PowerLift is a bus lift designed for use by individuals with mobility disabilities. This lift raises and lowers a bus passenger in a wheelchair between ground level and the level of the bus floor. It features a compact design and durable construction. WARRANTY: One year limited warranty; extended warranty available.

Pvi Multifold Ramp With Extended Lip (Models Utw630, Utw730, Utw830, & Utw1030)

The PVI Multifold Ramp With Extended Lip, models UTW630, UTW730, UTW830, and UTW1030 (also known as the PVI Utility Ramp), is a portable van ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This folding ramp has an extended hook so that the top of the ramp clears the rear bumper. It separates into two pieces for folding and transport, and it is carried like a suitcase. The ramp has welded construction with an anti-slip, high traction surfa

Pvi Rear Door Ramp (Models Van727 & Van827)

The PVI Rear Door Ramp, models VAN727 and VAN827, is a van ramp designed for use by individuals with mobility disabilities or spinal cord injury. This ramp mounts to the floor of the van inside the doorway. It has three sections and is manually operated with a spring assist. The unit has durable welded construction, with an anti-slip, high traction surface. The ramp accommodates wheelchairs and scooters with various wheel configurations, and it can be operated by one person. The unit stores vert

Q Straint Pocket System (Model Q-5001)

The Q'Straint Pocket System, model Q-5001, is a wheelchair restraint system designed to secure wheelchairs and their occupants in vehicles. The belts have bear clamps to adjust length and hooks to attach to frame of wheelchair and to floor pockets located in the floor of the vehicle. Lap and shoulder belts secure the occupant in the wheelchair. The complete system includes two rear belts, two front belts, , one shoulder belt, one lap belt, one shoulder belt bracket assembly, four floor pocket

Q'straint System (Model Q-5001-T)

The Q'Straint System, model Q-5001-T, is a wheelchair restraint system designed to secure wheelchairs and their occupants in vehicles. This model can be mounted on heavy-duty, floor-mounted aluminum L track (available with or without flange; not included), wheelchair tie-down straps, and occupant shoulder and lap belts. The complete system includes two rear belts, two front belts, one lap belt, one shoulder belt, one driver instruction guide, one instruction adhesive label, and one warranty card

Qrt Retractable Securement System System (Models Q-8100-A1 & Q-8200-A1)

The QRT Retactable Securement System is a wheelchair restraint system designed to secure wheelchairs and their occupants in transit and para-transit buses. This system can be mounted on tracks, walls, swing arms, floors, seats, flip seats, or barriers. The system retracts out of sight when not in use and a hard cover protects it from damage. Model Q-8100-A1 is the deluxe system and includes four QRT automatic retractors, an all new adjustable lap/shoulder belt combination, interchangeable self-t

Raised Top (Models V32 & V32A)

Raised van top is necessary for tall driver in wheelchair to maneuver inside van and to have proper visibility for driving. Variety of sizes for different vans but not all sizes available for all vans. Roof is white fiberglass. Sport Top offers 5 feet of headroom; full size offer 6 feet of headroom; mid size give 5 feet 4 inches. Sport Top has 2 windows and luggage rails. Raised windows available separately.

Ready Ramp (Models Rr06, Rr07, Rr08, & Rr10)

The Ready Ramp is a folding van ramp designed for use by wheelchair users. This compact portable ramp unfolds to its full size in three steps and has recessed hinges so the ramp surface is free of obstructions. Construction is welded aluminum with a non-skid surface. DIMENSIONS (LxW): 6 feet x 30 inches open, 42 x 15 inches closed (RR06); 7 feet x 30 inches open, 48 x 15 inches closed (model RR07); 8 feet x 30 inches open, 56 x 15 inches closed (model RR08); 10 feet x 30 inches open, 68 x 15 inc

Ricon Clearway S-Series Split Platform Lift

The Ricon Clearway S-Series Split Platform Lift is a platform van lift designed for use by individuals with mobility disabilities. This van lift features a fully automatic split platform that folds up to leave the doorway clear. It has a steel frame, a non-skid platform with handrails, automatic inboard and outboard rollstops, an hydraulic pump, a built-in manual backup system, pre-lubricated bearings at all major pivot points, and dual-power cylinders for smooth operation. OPTIONS: Power remote

Ricon Klearvue K-Series Folding Platform Lift

The Ricon KlearVue K-Series Folding Platform Lift is a platform van and bus lift designed for use by individuals with mobility disabilities. The platform folds in half for stowing. When stowed, it provides an unobstructed view of the road for the driver and for passengers. Because the platform folds, it can accommodate scooters and wheelchairs that require a longer platform without modifications to raise the roof or door. Other features include a built-in manual back-up system (hand pump to move

Ricon Reliant S-Series Wheelchair Lift

The Ricon Reliant S-Series Wheelchair Lift is a platform van lift designed for use by individuals with mobility disabilities. This compact van lift has a steel frame and hydraulic pump. Other features include no-lube bearings at all major pivot positions; Sto-Loc technology that locks the platform in the stowed position; automatic inboard/outboard rollstops; a non-skid platform; handrails; a control switch for lowering and raising the lift; and a built-in manual backup system. OPTIONS: Power rem

Ricon S-Series Lift

The Ricon S-Series Lifts are platform van lifts designed to provide access for wheelchair users to vans and public transit vehicles. These lifts feature easy-to-grasp curved handrails, a steel mesh platform, an inboard rollstop that prevents the wheelchair from inadvertently rolling toward the vehicle when the lift is below floor level, an outboard mechanical rollstop that operates even when the vehicle is as much as four feet from the curb, raised platform sides, and patented electrically inte

Scooter Station

The Scooter Station is a wheelchair and scooter restraint system designed for use by individuals with mobility disabilities. Designed for use in full-sized vans, mini vans, and the beds of pickup trucks, this electronically-powered system requires no belts and operates with the touch of a button.

Semi Automatic Mini Van Lift-A-Way Lifts

Platform van lift with welded steel construction and semi-automatic operation. Optional handrail. Lift folds and unfolds manually to and from storage position. Lift models to fit most side slide doors on domestic and imported minivans and double rear doors on some domestic minivans. Box frame construction provides rigidity without relying on vehicle side wall strength. Hydraulic pump for quiet operation. Roll- stop on front of platform. Circuit breaker protects against electrical overload. Optio

Semi Automatic Platform Van Lifts (L10 & L40 Series)

Platform van lift with welded steel construction and semi-automatic operation. Optional hand rail. Lift folds and unfolds manually to and from storage position. Lift models fit most side slide, side double and rear van and commercial vehicle doors. Box frame construction provides rigidity without relying on vehicle side wall strength. Hydraulic pump provides quiet operation. Roll-stop on front of platform. Circuit breaker protects against electrical overload. Lift models provide differing amount

Semiautomatic Hydraulic Folding Side & Rear Mount Lift (Models V1C1 & V1C2)

Semiautomatic electric or hydraulic folding side or rear mounted lift for wheelchair users; folds and stores in vehicle. Automatic safety stop. Powered by 12 volt van battery. Includes manual backup system.

Side Door (Models Sdr626 , Sdr628 & Sdr728)

Side Door, models SDR626, SDR628 and SDR728, is a van ramp designed for use to provide wheelchair or scooter access for van passengers with mobility disabilities or spinal cord injury. It mounts to the floor of the van inside the doorway. When not in use it folds in quarters and stores vertically, leaving the doorway free. A center joint hinge eliminates pinch point and adds strength. Made of welded aluminum with an anti-slip, high traction surface, the unit accommodates wheelchairs and scooters

Small Item Storage Solution For Van

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with Friedrich's ataxia to carry small items in a van which might get entangled in wheelchair wheels. Attach 3M picture hangers to the wall of the van within reach. They can used to hold a cell phone charger, coffee mug, and other small items. MATERIALS: 3M Picture Hangers. AUTHOR: Labbe, A. TITLE: Quest Extra: Doing It Yourself. JOURNAL: Quest. WEB SITE: http://www.mda.org/publications/quest/extra/qe14-5_diy.html REF: Volume 14, Number 5

Smooth Floor Covering (Wood Wheelchair Flooring)

Smooth floor covering of Luan Mahogany plywood provides smooth surface over factory installed metal van floor for wheelchair access. Provides easier wheelchair movement inside van.

Stepless Easyfold Ramp (Models 30060-090, 30060-120, 30060-150 & 30060-180)

The Stepless EasyFold Ramp, models 30060-090, 30060-120, 30060-150 and 30060-180, is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. This single-fold ramp can be folded and carried with the attached carrying handles or stored. When unfolded, the ramp provides a solid non-skid surface. The ramp can be positioned and removed as needed to overcome minor height differences. Models 30060-1

Stepless Easyfold Telescopic Ramp (Models 30070-180, 30070-210, 30070-240, & 30070-300)

The Stepless EasyFold Telescopic Ramp, models 30070-180, 30070-210, 30070-240 and 30070-300 is a portable ramp and van ramp designed to provide wheelchair or scooter access to structures and vans for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. The length of the ramp is adjustable so it can be used to provide access between two surfaces with a variety of height differences. The telescopic function prevents finger pinching

Stepless Wide Folding Ramp (Models 30040-150, 30040-200, 30040-250, & 30040-300)

The Stepless Wide Folding Ramp, models 30040-150, 30040-200, 30040-250 and 30040-300, is a portable ramp designed for use to provide wheelchair or scooter access for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. This ramp's increased width is intended to provide increased safety for users of scooters and electric wheelchairs and their helpers. The unit can be kept permanently in position or always used in the same place. T

Superarm Lift 2000

The Superarm Lift 2000 is a steel van lift designed without a platform for use with manual and powered wheelchairs, or scooters (with optional harness attachments). Instead of a platform, the wheelchair and its occupant are raised or lowered by means of a pivoting arm. The lift is designed to work without modification to the vehicle and without obstructing the doorway to other passengers. The wheelchair tips backwards for occupant's head clearance through the van door. Operation toggle switches

Sure-Lok Fe500 Series System

The Sure-Lok FE500 Series System is a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. The system includes over-center buckle and/or cam buckle straps with a minimum breaking strength of 6,000 pounds and 5,000 pounds, respectively. Most kits available in this system have vehicle anchoring hardware that is "positive-locking" to ensure that when the system is properly installed, the strap assemblies cannot be inadvertently released or di

Sure-Lok Heavy Duty Series A Track (Models 2025 & Fe702-01)

Sure-Lok Heavy Duty Series A Track is hardware for a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. The track is made of 11-gauge high-strength steel coated with a rust-inhibiting powder, and comes in vertical (model 2025) or horizontal (model FE702-01) styles. OPTIONS: Special length track is available. COLORS: Track is gun metal grey. DIMENSIONS: Horizontal and vertical tracks are both available in 5 or 10 feet sections. WEIGHT: A

Sure-Lok Heavy-Duty Series A Floor Plate (Model Fe200740)

Sure-Lok Heavy-Duty Series A Floor Plate, model FE200740, is hardware for a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. This low profile plate is made of zinc-plated steel. OPTIONS: A floor plate kit is available that inlcudes one model FE200740 floor plate, one backing plate, and bolts, nuts, and washers (four of each). WEIGHT: 1 pound.

Sure-Lok Integrated Combination Belt (Model Fe200727)

The Sure-Lok Integrated Combination Belt, model FE200727, is a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. This system combines a shoulder belt and an integrated lap belt in a fully retractable unit. The unit retracts to the vehicle sidewall; a Velcro strap is provided to keep the belt ends up against the vehicle sidewall when not in use. The retractor mechanism can be mounted directly to the vehicle floor or sidewall, or into Ser

Sure-Lok Integrated Lap Belt (Model Fe200595)

The Sure-Lok Integrated Lap Belt, model FE200595, is a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. This belt is intended for use with the FE500 Series Wheelchair Securement System only (see separate entry). It attaches directly to the rear strap assembly of the wheelchair securement system, and provides an occupant restraint system that is an integrated part of the wheelchair securement. Its restraint capability is dependent upon

Sure-Lok Parallel Lap Belt (Models Fe200594, Fe200600, Fe200601, Fe200612)

The Sure-Lok Parallel Lap Belt is a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. This belt attaches directly to the floor track or plates to secure the passenger separately and independently from the wheelchair securement system. The belt's anchoring hardware is positive-locking to ensure that the belt assemblies cannot be inadvertently released or disengaged. A single push-button function allows the release and evacuation of the o

Sure-Lok Series L Single Bolt Floor Plate (Models Fe200784 & Fe200844)

The Sure-Lok Series L Single Bolt Floor Plate is hardware for a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. Both plates have a track section made of stainless steel and come with mounting hardware. Model FE200784 is a surface mount plate and comes with an impact-resistant, plastic ramped collar. Model FE200844 is a flush mount plate and comes with a stainless steel case. WEIGHT: Both models weigh one pound.

Sure-Lok Series L Track

Sure-Lok Series L Track is hardware for a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. Track is made of aluminum with a natural finish, and is available in heavy-duty or medium-duty weights. Both the heavy-duty and medium-duty track are available in plain style or with flanges or flanges and mounting holes (100-inch length); with four countersunk holes (8 foot length); or with two holes (9 foot section). Medium-duty track is also a

Sure-Lok Shoulder Belt (Models Fe200599, Fe200604, Fe200604L, Fe200613, Fe200710, Fe200710L, Fe200716, Fe200732)

The Sure-Lok Shoulder Belt is a wheelchair restraint system designed for use by individuals with mobility disabilities or spinal cord injury. Models FE200599, FE200613, FE200716, and FE200732 are non-retractable shoulder belts that can be attached to a section of track mounted on the vehicle sidewall. Models FE200599 and FE200732 are designed for use with Series L track; models FE200613 and FE200716 are designed for use with Series A track (see separate entries). These models are intended for us

Swing Out Lift

The Swing Out Lift is a rotary van lift designed to lift individuals in wheelchairs into vans. Minimal space is needed between parked vehicles to operate the lift with side entry. Controls are mounted on a safety bar and the lifts have a safety backup system and beltless drive. The lift has an integral Electro brake mechanism. The unit is completely assembled and wired at the factory. The installation is such that it may be done by the owner. OPTIONS: There are models with sliding side doors or

Tie Tech 700 Series Restraint System

The Tie Tech 700 Series Restraint System is a wheelchair restraint system designed to provide secure tie down for people who travel in wheelchairs in vehicles. The system includes tracks that mount securely to the floor of any vehicle. The torso harness straps and lap strap attach independently to the tracks, behind the passenger and then snap together in the front, forming one unit. Wheelchair straps, two on each side to form a four-point system, attach from the wheelchair to the tracks in fron

Tracker Inside Lift

The Tracker Inside Lift is a scooter and wheelchair loader designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This lift has a drive-on lifting platform for power chairs and scooters, with two docking system options, the Dock 'N' Lock positive self-guiding manual release docking system and a strapping system. Once the power chair or scooter has been secured to the lifting platform, it is lifted and stowed inside the vehicle's cargo area. This lift

Transit Rider R-5500 Series

Semi-automatic wheelchair lift, electric/hydraulic powered. 31 inch lift travel. Fits in vans with 40 inch doorway width. Overall platform size 32 inches wide by 45 inches long. 47.5 to 61.5 inch maximum entry height via 4 models. 7 second lift time. All steel frame construction. 130 amp maximum load electric motor with hand pump backup. Pendant switch operation by attendant only. CAPACITY: 800 pound maximum lifting capacity.

Uvl Series Van Lift

The UVL (Under Vehicle Lift) Series Van Lift is a platform van lift designed for use by wheelchair users. The lift is mounted underneath the vehicle so it does not take up space in the interior of the van and remains out of sight until deployed. The lift is electric for the in/out cycle and the outboard roll stop. The up/down cycle is hydraulic. All functions are controlled by the standard hand-held control or the optional remote control. The lift can be installed at the side door of domestic fu

Van Seat Extention

CUSTOM ADAPTATIONPURPOSE: To enable transfers from the second row seat on the door side of a van, which was too distant for easy transfer. A padded box seat was built to temporarily fill the gap while the passenger enters the van. The box seat is removed to close the door. TITLE: The Van Seat Extention. WEB SITE: Workshop Solutions at http://www.workshopsolutions.com. REF: The originator, Tom Jeary, can be contacted at tlj@golden.net.

Vangater Ii

The Vangater II is a wheelchair van lift designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This power lift has a tri-folding platform. When the lift is in the stowed position, over half the van's side door is available for ambulatory exit and entry. The lift is electrically powered for both the fold/unfold and up/down cycles. Lift operation is controlled using a hand-held control, on-lift controls, or an optional remote control. It also features

Wheelchair And Occupant Belt / Track System.

The Wheelchair and Occupant Belt/Track System has successfully impact tested at 30 MPH/20G. This test simulated the performance criteria required in FMVSS ##208, 209 and 210. Two models of shoulder restraints available, wall mounted non-retractable, and retractable. Tracks are installed in the floor of the van, in front and behind the chair, to lock the front and rear of the wheelchair frame in place. Web stiffeners are installed in the lap belt portion of the restraint to assist in connecting t

Wheelchair Chest Restraint

The Wheelchair Chest Restraint is a seat belt intended for use by people with lower extremity or mobility disabilities, spinal cord injury and others who use a wheelchair. This adjustable Velcro belt mounts onto wheelchair to secure occupant of chair. A separate restraint is needed to hold wheelchair securely to vehicle. Manufacturer states that this restraint should not to be used instead of an automotive seat belt.

Wheelchair Lift Sensing Mat

The Wheelchair Lift Sensing Mat is a lift sensor mat that is used to detect the presence of a wheelchair or scooter on a bus- or van-mounted lift. When installed on a lift, the mat can be used to signal the van or bus operator that the lift is ready for operation and to detect an unknown or unexpected person or object on the lift and prevent prevent the operator from stowing the lift or moving the vehicle until the object is off of the lift platform. This mat has a durable molded design with par

Wheelchair Seatbelt Holdown (Model 126)

The Wheelchair Seatbelt Holdown, model 126, is a restraint system designed to keep wheelchair occupants secure when in a vehicle. The extra-long seatbelt straps attach to the floor with angles or Wheelwells (see separate entry), wrap around the armrests and in front of the wheelchair user.

 
Processing...


Driving Walking/Biking Public Transit  Get Directions