Capacity 501 Pounds and Up

Results: 323

2-Person Companion Car

The 2-Person Companion Car is an adapted golf cart or personal electric vehicle designed for use by individuals with walking, circulatory, or balance disabilities, arthritis or limited stamina. This golf cart enables a person seated in the rear seat to play golf without getting out of the car and without having to operate or steer the cart. A companion in the front seat operates the vehicle. When the cart approaches a golf ball, the passenger in the back seat can rotate the seat and hit the ball

5 Position Bariatric Expanda-Bed

The 5 Position Bariatric Expanda-Bed is a motorized bed designed for use by individuals with obesity and severe physical disabilities or spinal cord injury. This bed features head and foot elevation, Trendelenberg position, seat up and down, and adjustable bed height. It has single button controls for cardiac chair position, return to supine, and Trendelenberg operation. Trendelenberg operation may be used without having the bed either fully up or fully down. The bed has Steer-Lock casters, and

A Frame by Smirthwaite

The A Frame by Smirthwaite is a swing frame that has been designed to handle a large weight capacity. It is designed for use by children with sensory integration disorders, and physical and neurological disabilities. Made from tubular steel and supported by six legs, the A Frame can handle 300 kilograms (661 pounds). This allows two Smirthwaite swings or bolsters to be used at the same time. It is easy to construct and can be used with or without cushioned mats.

Access4U Mini Wheelchair Ramps

Access4U Mini Wheelchair Ramps are designed for use to make steps or other rises wheelchair accessible. These lightweight ramps can be used semi-permanently on one to two steps. They have a welded aluminum frame with an aluminum skid-resistant deck. DIMENSIONS (LxW): 2, 3, 4, 5, or 6 feet x 30 or 36 inches. Custom sizes are available. CAPACITY: 600 pounds.

Access4U Portable Folding Ramp

The Access4U Portable Folding Ramp is a portable ramp designed for use by individuals with mobility disabilities or spinal cord injury. This ramp provides wheelchair access over one or two steps or a curb. The ramp is made of welded aluminum and folds to fit in a car trunk or van. DIMENSIONS (LxW): 2, 3, 4, 5, or 6 feet x 30 or 36 inches. Custom sizes are also available. CAPACITY: 600 pounds.

Active Life Station

The Active Life Station is an accessible table designed for use with children and adults with severe cognitive, emotional, or physical disabilities who require constant supervision. This table system surrounds the user on all sides, with one side being a secure access door. The individual's wheelchair or feeder seat is positioned on a 360-degree rotating base in the center, enabling the user to access table surfaces on all sides. The station can be used for watching television, using a computer,

Adjustable Advantage Toilet Seat Adjust For Comfort (Adjust For Comfort Toilet Seat)

The Adjustable Advantage Toilet Seat is a unique and innovative personal positioning device designed to provide a comfortable and conformed toileting experience. This adjustable toilet seat is able to fit on both standard and elongated toilets to accommodate nearly any size user. It is a deluxe seat that is ideal for anyone looking for a more personal and conforming seating solution. It is made out of stainless steel plates that are built into the seat to internalize the hinge to prevent any po

Air Support

The Air Support is a bariatric air mattress designed for use by individuals who are at risk for pressure sores/ulcers and are obese. The mattress operates in alternating or static low-air Loss modes. The alternating mode features one-in-three alternation. The quilted top cover is waterproof, vapor permeable, and machine washable. The mattress features twenty reinforced inflatable cells. The mattress deflates quickly for CPR function and the mattress system is completely replaceable. Digital tech

Air+Chair

The Air+Chair Onboard Transit Chair is a transfer wheelchair for onboard an airplane designed for use by individuals with lower extremity, mobility, and neurological disabilities, or spinal cord injury. This wheelchair is designed to fit narrow aisles and confined spaces for use in boarding aircraft. FRAME (HxLxW): 34 x 35.25 x 16.75 inches; when folded (HxDxW) 23.35 x 23.25 x 9.25 inches. It has a light gray solid welded frame with handles extending from the back. SEAT: Adjustable padded seat a

Albacmat Rescue Mat

The AlbacMat Rescue Mat is an emergency evacuation system designed for use with individuals with mobility disabilities or spinal cord injury. Made of a polypropylene board covered by a lightweight canvas material, the unit has a handle above the user's head, a handle below the user's feet, and three handles on each side. It has two safety straps at the torso and the shins to secure the user to the mat, and a pocket at the bottom in which the user places his or her feet. The straps and handles ar

Albacmat With Thermal Cover

The AlbacMat with Thermal Cover is an emergency evacuation system designed for use with large individuals with mobility disabilities or spinal cord injury. Made of a polypropylene board covered by a lightweight canvas material, the unit has a handle above the user's head, a handle below the user's feet, and three handles on each side. It has three safety straps at the torso, hips and shins to secure the user to the mat, and a pocket at the bottom in which the user places his or her feet. The str

Alumilite Solid Curb Ramp

The Alumilite Solid Curb Ramp is a curb ramp designed to provide access over curbs or steps for wheelchair users. The ramp features welded aluminum construction with a permanent non-skid surface that is integral to the aluminum and cannot tear or wear off. The ramp can be used as a short fixed ramp or for temporary purposes. DIMENSIONS (LxW): 3, 4, 5, or 6 feet x 30 or 36 inches. WEIGHT: 18 to 41 pounds depending on size. CAPACITY: 600 pounds.

Aluminum Threshold Ramp

The Aluminum Threshold Ramp is a threshold RAMP designed to make doorways accessible to individuals who use wheelchairs or scooters. This aluminum ramp has an anti-slip, high traction sandpaper surface. The ramp has mounting holes in its top corners and comes with hardware to secure it to the doorway surface. DIMENSIONS (LxW): 8, 10, 12, 16 or 24 x 32 inches or 16 or 24 x 36 inches. The rise is 0.25 to 0.5, 0.5 to 0.75, 0.75 to 1, 1.5 to 2, or 1.5 to 3 inches depending on length. WEIGHT: 3 to 15

Aqualine Bath

Aqualine Bath is a height adjustable bath designed for use by individuals with mobility and balance disabilities who require assistance with bathing. This bath benefits the caregiver as well as the user, as it is height-adjustable. Caregivers can set the height of the bath at a comfortable level for them, using a simple control panel, helping to avoid back strain. Access into the bath is via a ceiling/wall mounted track or a mobile system. An attachable showering and changing top is available

Aquatrek Ladder

The AquaTrek Ladder is a pool ladder designed for use by individuals with balance or mobility disabilities. This portable and removeable ladder has stairway-style steps with siderails. It is available in four, five, or six tread (step) models, and can be custom built to fit the pool. Each tread comes with a nonslip safety surface. The ladder is constructed using a non-corrosive metal skeleton encased in a rigid PVC skin. The ladder is equipped with wheels for portability on deck. A heavy-duty ve

Argo 6X6 Vanguard

The Argo 6x6 Vanguard is an amphibious all terrain vehicle which may be used by persons with lower extremity disabilities due to the vehicles all hand-controlled operation. This 6-wheel drive vehicle may be driven directly from land over water, deep snow, mud, swamp, bog, and bushland. Features include a V-Twin Briggs & Stratton engine, mechanical disc brakes, and all-wheel-drive maneuverability, and skid steering. FRAME: 11-gauge roll-formed steel channel, welded for strength and flexibilit

Argo 8X8 Magnum

The Argo 8x8 Magnum is an all-terrain vehicle designed for use by able bodied individuals and persons with mobility disabilities due to its hand controlled drive and steering. This 8-wheel drive vehicle may be used on rough terrain and dense vegetation, mud, streams, small lakes, deep snow, and ice. Features include a V-Twin Briggs & Stratton engine, mechanical disc brakes, and all-wheel-drive maneuverability, and skid steering. FRAME: 11-gauge roll-formed steel channel, welded for strength

Armada Modular Ramp System

The Armada Modular Ramp System is a modular ramp designed to provide access for wheelchairs and scooters. The system includes ramps, platforms, support legs, and handrails. The system's universal platform design allows for virtually any configuration. Curbs and handrails can be positioned on any side. Components are made from anodized aluminum with heavy-duty welded construction. The bi-directional knurled tread forms a rugged skid-resistant surface that cannot wear off or peel. Height and slope

Ascender 300, Ascender 500, & Ascender 1000 Hip Chair

The Ascender 300, Ascender 500, and Ascender 1000 Hip Chairs are geriatric chairs designed for use by individuals with arthritis or lower extremity disabilities. Features include a cradle-style extended headrest, a retractable footrest, a padded armrest, and an adjustable back with four back positions covering a range of approximately 90 to 70 degrees. The chair has interchangeable back and seat cushions of different thicknesses, which can be exchanged to change the seat height. OPTIONS: Leg sup

Ascender Mp 300, Mp 500, Mp 1000, & Mp 1000 Plus Waiting Room / Office Chair (Models 8000, 8200, 8400, & 8600)

The Ascender MP 300, MP 500, MP 1000, and MP 1000 Plus Waiting Room / Office Chair are heavy-duty office chairs designed for use by individuals with lower extremity disabilities. These mission-style chairs have an adjustable back with four back positions covering a range of approximately 90 to 70 degrees. By flipping a lever on the side of the chair, the seat pan can be placed in a 10-degree forward slope. Other features include EZ Grip armrests and a blood-drawing armrest attachment. OPTIONS: E

Ascension Virtuoso (Model 5460F)

The Ascension Virtuoso, model 5460F, is an interior wheelchair lift designed for use by individuals with spinal cord injury or lower extremity or mobility disabilities and others who use wheelchairs. This lift does not require a tower as part of its construction, nor does it have an access ramp so that a person can enter it directly from street level. The lift consists of a drive system, the passenger platform, and doors or gates. The platform is enclosed on four sides by transparent thermoplas

Ascension Virtuoso (Models 4860P And 5460P)

The Ascension Virtuoso are portable wheelchair lifts designed for use by individuals with spinal cord injury or lower extremity or mobility disabilities and others who use wheelchairs. These lifts do not have an access ramp so that a person can enter it directly from street level. The lifts consist of a drive system, passenger platform and doors or gates, all mounted on casters for portability. The casters lock, and the lift will not operate when they are not locked. The platform is enclosed on

Auto Height Adjustor (Model 5100)

The Auto Height Adjustor, model 5100, is a mechanical lifting device for adjusting suspended equipment to the right height for the user. It is operated by a hand held crank which lifts the equipment with or without the client. The Auto Height Adjustor can be used from any one point suspension system and fits into the same ceiling bolt as the Rotational Device (see separate entry). OPTIONS: Battery operated crank, model 5200, with two rechargeable batteries is available for $339.00. DIMENSIONS: L

Bari 385 Transport Commode Shower Chair

The Bari 385 Transport Commode Shower Chair is a bariatric commode shower chair designed for use by individuals with mobility disabilities. This chair has a powder coated stainless steel frame with drainage holes and a urethane foam commode seat with front opening. A bed pan and basket are included with the commode seat. The seat has up to 8 degrees of anterior tilt and 14 degrees of posterior tilt, with up to 65 degrees of back recline. The fixed-height armrests can be removed or rotated to adj

Bari-Commode Chair

The Bari-Commode Chair is a fixed height commode designed for use by obese individuals. FRAME (WxDxH): This commode is available in three sizes: 24 x 22 x 25.5 inches, 28 x 22 x 25.5 inches, and 40 x 23 x 25.5 inches. All models have a heavy-duty, rust resistant stainless steel frame with a removable back bar. SEAT (WxDxH): Three seat sizes are available: 20 x 18 x 19 inches, 24 x 18 x 19 inches, and 36 x18 x19. The padded seat is water- resistant and anti-bacterial. ARMS: One arm drops to seat

Bariatric Bath Transfer Bench (Models Pvcm16536700 & Pvcm16536900)

The Bariatric Bath Transfer Bench is a transfer bench designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This heavy-duty bench is made of PVC plastic with dual reinforcement throughout the frame. The bench has a high-density polyethylene foam cushion with non-slip rubber grips for safety. The 900-pound capacity transfer bench has an extra leg for increased stability. CAPACITY: 700 pounds (model PVCM16536700) or 900 pounds (model PVCM16536900). DI

Bariatric Bedside Commode / Shower Chair (Pvcm130C10Bcs)

The Bariatric Bedside Commode/Shower Chair, model PVCM130C10BCS, is a shower chair and commode designed for use by individuals with mobility disabilities. The chair has a high-density polyethylene seat with a removeable seat cushion. There are non-slip rubber tips on the chair legs, and safety grips on the arms. DIMENSIONS (HxLxW): 43 x 28 x 34 inches overall and 30 inches wide between the armrests. CAPACITY: 700 pounds.

Bariatric Cane - Custom Fitted (Model 835-1000)

The Bariatric Cane-Custom Fitted, model 835-1000, is an offset cane designed for use by obese individuals with balance, lower extremity, or walking disabilities. This fixed-height aluminum cane has tube-in-tube construction from tip to tip for added strength and is equipped with a rubber tip. DIMENSIONS: Available in 28 to 42 inches tall in one-inch increments. CAPACITY: 1,000 pounds.

Bariatric Chair / Stretcher (Model Mdtmbc835)

The Bariatric Chair/Stretcher, model MDTMBC835, is a stretcher wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This manual wheelchair converts to a rolling stretcher with the flip of a switch. FRAME: 39 inches wide. The chair / stretcher comes with an IV rod and oxygen holder. SEAT: The seat is 31 inches wide. The back has an electrically-driven recline function and is infinitely adjustable. ARMRESTS: Includes independently adjustable armrests. FOOTRE

Bariatric Custom Fitted Aluminum Forearm Crutch (Model 600A)

The Bariatric Custom Fitted Aluminum Forearm Crutch, model 600A, is a forearm crutch designed for use by individuals with lower extremity or walking disabilities. These custom-fitted aluminum crutches are not height adjustable. Features include an adjustable, unbreakable nylon cuff, replaceable grips, and replaceable rubber tips. OPTIONS: Replacement grips and tips. DIMENSIONS: The aluminum is 1/8-inch thick. CAPACITY: 700 pounds. WEIGHT: 2.6 pounds. COLOR: Black powdercoat finish.

Bariatric Drop Arm Steel Commode (Model Mds89668Xw)

The Bariatric Drop Arm Steel Commode, model MDS89668XW, is a commode chair designed for use by individuals with mobility disabilities. This bariatric drop-arm steel commode chair features a single-handed arm release and an elongated opening. The powder-coated steel frame is riveted and welded for stability, and the legs have non-skid, non-marring rubber tips. The seat is blow-molded plastic. CAPACITY: 850 pounds.

Bariatric Exam Table (Model Mdr746100)

The Bariatric Exam Table, model MDR746100, is a treatment table designed for use in clinical settings. This exam table is constructed with a welded steel base and frame, and has a motorized backrest, hands-free foot control, and a hospital grade plug. DIMENSIONS (HxLxW): 20 to 30 x 72 x 33 inches. CAPACITY: 600 pounds.

Bariatric Flip Seat Scale (Model Mph07Db1)

The Bariatric Flip Seat Scale, model MPH07DB1, is a platform seat scale designed for use by bariatric individuals with mobility disabilities. This scale has a flip down seat with foam hand grips and an extra wide platform, enabling individuals to be weighed in a sitting or standing position. It has a wrap-around tubular stainless steel design with a non-slip rubber mat and hand grips. Other features include wheels for mobility and a high-contrast liquid crystal display (LCD). POWER: Uses 6 C siz

Bariatric Folding Walker (Model 830F)

The Bariatric Folding Walker, model 830F, is a folding adjustable walker designed for obese individuals with walking, balance, or lower extremity disabilities. This walker has a folding frame with rubber tips. OPTIONS: Front wheel kit. DIMENSIONS: The height adjusts from 30.5 to 39.5 inches. The width between the handgrips is 22 inches and the width between the legs at the bottom is 24 inches. The overall width at the top is 23 inches and the overall width at the bottom is 25 inches. The depth a

Bariatric Handrail

The Bariatric Handrail is a handrail designed for use by individuals with balance, lower extremity, or mobility disabilities. The handrail is made of aluminum with powder coat. Bracket and return/corner are available in stainless steel with optional powder coat. The grip is 1.5 inches in diameter, and it extends 3 inches from the wall. All mounting fasteners are included with the product. DIMENSIONS (LxD): 12 feet x 1.38 inches. CAPACITY: 1000 pounds. WARRANTY: Limited lifetime warranty.

Bariatric Hi-Lo Treatment Table (Model 4795)

The Bariatric Hi-Lo Treatment Table, model 4795, is a powered treatment table designed for use by individuals with mobility disabilities or spinal cord injury. This treatment table has motorized height adjustment from wheelchair level, and a power backrest that adjusts from 0 to 75 degrees. Lifting/lowering is provided by two synchronized direct-drive lifts with hand controls. The table has a laminate frame and an extra-wide tabletop with a high-density urethane foam cushion and vinyl upholstery

Bariatric Large-Base Quad Cane

The Bariatric Large Base-Quad Cane is a height- adjustable quad cane designed for use by individuals with balance and walking disabilities. Made of steel, this cane features a twist locking ring to provide additional security during height adjustment. Other features include a large-base footprint for maximum stability and walking assistance, large height adjustment ranges, and a PVC contoured hand grip. DIMENSIONS: Height adjustment ranges: (minimum) 4 to 11 inches, and (maximum) to 6 to 5

Bariatric Lift Recliner (Model Mdr35B700V1)

The Bariatric Lift Recliner, model MDR35B700V1, is a recliner chair designed for use by individuals with mobility disabilities. This high-strength recliner has independent back and foot positionins with hand controls, an extra-wide head rest, and vinyl upholstery. Three separate motors control its operation. DIMENSIONS (HxW): 47 x 45 inches overall; the distance from the floor to the top of seat is 21 inches. When the chair is reclined, the distance required from the wall is 24 inches. The seat

Bariatric Multifold Portable Ramp (Models Bar536, Bar636, Bar736, & Bar836)

The Bariatric Multi-Fold Portable Ramp is a bariatric portable ramp designed to provide access for wheelchairs and scooters. This welded aluminum ramp separates into two pieces for carrying. The two ramp panels fold in half and are locked together with a closure strap, then carried like a suitcase. The ramp has an anti-slip surface for traction during use and a center joint hinge for strength. The ramp comes with a visual aid to determine if it is on a safe slope. DIMENSIONS (LxW): 5 x 3 feet (m

Bariatric Panel Ramp (Models Bpr348, Bpr448, Bpr548, & Bpr648)

The Bariatric Panel Ramp is a ramp designed to provide wheelchair or scooter access for individuals with mobility disaabilities or spinal cord injury. This ramp consists of three interlocking sections with an additional panel the can be used to increase ramp widths. The outside panel has curbing to keep the wheelchair or scooter in place while in use. The ramp is made of welded aluminum with an anti-slip high- traction surface suitable for all weather conditions, and can accommodate wheelchairs

Bariatric Quad Cane (Model 840-700)

The Bariatric Quad Cane, model 840-700, is an adjustable quad cane designed for obese individuals with balance or walking disabilities. This cane is equipped with rubber tips. DIMENSIONS: The height adjusts from 29.5 to 38.5 inches to accommodate users from 4 feet, 11 inches to 6 feet, 5 inches tall. The cane footprint is 12 x 8.5 inches. CAPACITY: 700 pounds. WEIGHT: 5 pounds. COLOR: Black. WARRANTY: 3-year limited warranty.

Bariatric Raised Toilet Seat And Frame (Models 166, 166F, 166Hd &166Fhd)

The Bariatric Raised Toilet Seat and Frame, models 166, 166F, 166HD and166FHD, is a bariatric height adjustable toilet frame with elevated seat designed for use by heavy individuals with balance or mobility disabilities. The clip on and off contoured seat features a partial cut away at the front and rear. The plastic coated metal frame features rubber ferrules (models 166 and 166HD) or floor fixing flanges (models 166F and 166FHD) at the base of the legs. The entire frame can be positioned to st

Bariatric Seating (Models 7125, 7130, 7140, 7126, 7231 & 7141)

The Bariatric Seating chair, models 7125, 7130, 7140, 7126, 7231 and 7141, is a reinforced chair designed for use by individuals with obesity and mobility disabilities or by individuals who require support while sitting. The chair has a laminated wood frame, and seat and back platforms are removable. DIMENSIONS: Models 7125 and 7126 are 29 inches wide; models 7130 and 7131 are 34 inches wide; and models 7140 and 7141 are 44 inches wide. SEAT (DXW): 25 X 20 (models 7125 and 7126); 30 X 20 (models

Bariatric Shower Chair / Commode (Models Pvcm1305 & Pvcm1315)

The Bariatric Shower Chair/Commode is a shower commode designed for use by bariatric individuals with mobility disabilities. This combination shower chair and commode has a dual reinforced frame, four stainless steel bolts in the seat, and threaded-stem casters. A 10-quart commode slides out when not in use. Other features include anti-slip handgrips and a push/pull handle. Model PVCM1315 has a slide-out footrest. DIMENSIONS: Seat is 30 inches wide between armrests. CAPACITY: 700 pounds.

Bariatric Step Stool With Handle (Model Ss-H-05C)

The Bariatric Step Stool With Handle, model SS-H-05C, is a step stool designed for use by individuals with balance disabilities, caregivers, people of short stature, and people who are obese. This single step stool's frame is made of heavy duty tubular aluminum with a textured powder coat that will not rust, and it has a self-leveling anti-tip design. The stool has a platform with safety strips, angled leg tips to prevent slippage, and a vertical steel handrail attached to the back of the platfo

Bariatric Threshold Ramp (Models Btr 1636 & Btr 2436)

The Bariatric Threshold Ramp is an accesible threshold designed to make doorways accessible to individuals who use wheelchairs or scooters. This bariatric threshold ramp is made of lightweight aluminum with an anti-slip, high-traction sandpaper surface. It covers a threshold rise of 1.5 to 3 inches (model BTR 1636) or 2 to 4 inches (model BTR 2436), and comes with mounting holes and the hardware needed to secure it to the door molding. DIMENSIONS (LxW): 16 or 24 x 36 inches. CAPACITY: 800 pounds

Bariatric Tilt Table (Model 6045-709)

The Bariatric Tilt Table, model 6045-709, is a powered tilt table designed for use in physical therapy. A heavy-duty electric motor controls the table's angle of tilt from 0 to 90 degrees. The table has a tilt indicator display and can be operated from either side with hand controls. It has a heavy-duty steel frame, vinyl upholstery, thick high-density foam padding, three extra-long safety straps, and locking casters. POWER: Uses 110V. DIMENSIONS (HxLxW): 33 x 77 x 34 inches. The footboard is 18

Bariatric Transport Stretcher (Model Mph08S1190132)

The Bariatric Transport Stretcher, model MPH08S1190132, is a heavy-duty stretcher designed for use by individuals with mobility disabilities or spinal cord injury. This stretcher is intended specifically for transferring and transporting a bariatric individual. It has a reinforced frame, high-density foam mattress, full perimeter non-marring bumper, large casters, 3-position vertical side rails, and a hydraulic folwer back rest. It also has a beachwood powder-coat finish and is chrome plated. DI

Bariatric Underarm Crutch (Models 500R, 500T, & 500Xt)

The Bariatric Underarm Crutch is an axillary crutch designed for use by obese individuals with lower extremity or walking disabilities. These steel crutches have height-adjustable handgrips and repaceable underarm and handgrip pads and rubber tips. OPTIONS: Replacement handgrip pads, underarm pads, and tips. SIZES: Regular for users 5 feet, 2 inches to 5 feet, 11 inches tall (model 500R), tall for users 5 feet, 11 inches to 6 feet, 7 inches tall (model 500T), and extra-tall for users 6 feet, 8 i

Bariatric Wheelchair (Models W35795, W35795, & W35797)

The Bariatric Wheelchair is an adult manual wheelchair designed for use by obese individuals with mobility disabilities or spinal cord injury. FRAME: Features double square crossbraces with twin struts and reinforced and gusseted 5/8 inch rear axles. SEAT (WxD): The seat is available in 26 x 20 inches (model W35795), 28 x 20 inches (model W35796), or 30 x 20 inches (model W35797). The seat to floor height is 18 inches. UPHOLSTERY: Nylon upholstery with triple Tirtilene seat liner for added supp

Bariatric Wheelchair Cushion (Models Msc26320184, Msc26322184, Msc26324184, Msc26326184, & Msc26328184)

The Bariatric Wheelchair Cushion is a gel and foam seat cushion designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. The cushion is constructed with a gel pack placed between two layers of foam, and it has a Nylex cover. DIMENSIONS (HxLxW): 4 x 18 x 20 inches (model MSC26320184), 4 x 18 x 22 inches (model MSC26322184), 4 x 18 x 24 inches (model MSC26324184), 4 x 18 x 26 inches (model MSC26326184), or 4 x 18 x 28 inches (model MSC26328184). CAPACITY

Barrier Free Lift Unilift Ceiling Lift

The Barrier Free Lift Unilift Ceiling Lift is an overhead transfer lift designed for use with individuals with mobility disabilities. Available with a ceiling-mounted track or free-standing frame, this unit permits a horizontal change of direction to be performed by hand or with a motor. The transverse track system uses two tracks: one track is installed the entire length of the room and the other is a perpendicular track installed the entire width of the room. The lift can move on either track

Bath Bench Without Back & Heavy Duty Bath Bench

The Bath Bench without Back and the Heavy Duty Bath Bench are shower benches designed for use by individuals with mobility disabilities. Both models are height-adjustable and have molded, composite contoured seats with a textured finish and hand holds, and aluminum frames with suction feet. The Heavy Duty Bath Bench also has a molded, contoured back with a textured finish and drainage holes. DIMENSIONS: The height adjusts on both models from 14 to 18 inches. CAPACITY: The backless bench has a 30

Bathseat (Model 1720 & 1720D)

The Bathseat is a bath seat designed for use by bariatric individuals with lower extremity, mobility, or balance disabilities. Designed for use in standard bathtubs, this seat has an anodized aluminum tubular frame, double tubed for strength and a commode-style seat. A silicone seal prevents mildew and rust and vinyl cushions prevent marring of the tub. OPTIONS: Floor stand for use in shower. DIMENSIONS (WxDxH): 15.25 x 20 x 18.5 inches. The tub must be 22 inches wide at the center. CAPACITY: 8

Baylift

BayLift is a bus lift designed for use by individuals with mobility disabilities. This compact lift is contained in an enclosure in the luggage bay of the bus. Constructed of steel, the system uses an electro-hydraulic lift with manual backup (hand pump for up, pressure release valve for down). DIMENSIONS (HxLxW): Enclosure is 37 x 18 x 38 inches. Maximum usable platform area is 48 inches long x 29 inches wide. Maximum floor to ground travel is 62 inches. CAPACITY: 600 pounds. WEIGHT: 590 pound

Bcw 600 Wide Wheelchair

The BCW 600 Wide Wheelchair is a folding manual wheelchair designed for use by large adults. FRAME: Stainless steel folding frame with a baked urethane finish to ensure chip, scratch, and fade resistance. A double X-brace and 4 point telescoping at each corner to strengthen design are standard. The chair folds to 13 inches for transport and storage. A rigid frame is available. Black is the standard frame color; red, teal, silver, and charcoal chrome are available at an extra charge. Anti-tippers

Bcw Advantage (Models Bcwad22, Bcwad24, Bcwad26 & Bcwad28)

The BCW Advantage is an adult manual wheelchair designed for obese individuals with mobility disabilities. FRAME (WxDxh): Model BCWAD22 is 29 x 32 x 39 inches; model BCWAD24 is 31 x 32 x 39 inches; model BCWAD26 is 33 x 32 x 39 inches; and, model BCWAD28 is 35 x 32 x 39 inches. The blue heavy-duty stainless-steel frame features push handles, double crossbraces and four-point telescoping for strength and folds to 13 inches. Anti-tips are optional. SEATS: The standard seat is 20 inches deep and 20

Bcw Recliner (Models Rcbc2018, Rcbc2218, Rcbc2418 & Rcbc2618)

The BCW Recliner is a manual wheelchair with a powered reclining back designed for use by obese persons with mobility disabilities. FRAME: Heavy-duty, stainless-steel frame with double crossbraces. The frame features a baked urethane finish to resist chipping, scratching, and fading. The standard frame is black; red, teal, silver, and charcoal chrome are available at an extra charge. Model RCBC2018 is 28 inches wide by 42 inches deep; models RCBC2218 is 30 inches wide x 42 inches deep; and RCBC2

Bifold Ramp

The BiFOLD Ramp is a bus ramp designed for use by individuals with mobility disabilities. This double-folding, underfloor ramp can be installed for front or rear entry on a low-floor bus. The ramp is hydraulically operated with a manual back-up system that requires no valve or switch movement. It has a non-slip surface and stows flat. DIMENSIONS (LxW): Maximum usable platform area is 58.4 x 31.8 inches. CAPACITY: 660 pounds. WARRANTY: One year limited warranty; extended warranty available.

Big Bounder H-Frame Power Wheelchair

The Big Bounder H-Frame Power Wheelchair is a heavy duty powered wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME: Black powder-coated H-style TIG welded steel frame. The frame includes heavy duty 12 position adjustable suspension forks, anti-tipping wheelie wheels, sliding dual group 27 battery box with safety reflectors, and built in taillights. CONTROLS: UE1D electronic controls with 6 programs and bi-directional select swit

Big Bounder Manual Wheelchair

The Big Bounder Manual Wheelchair is a heavy duty manual wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME: Black powder- coated tube frame with heavy duty 12 position adjustable suspension forks and anti-tipping wheelie wheels. Options include a folding frame, frame reinforcements, frame colors other than black, lighting, and an electric horn. SEAT: 21 to 48 inch seat widths are available. Options include power seating systems

Big Boyz Scale System (Model 1226)

The Big Boyz Scale System, model 1226, is a digital scale accessory designed for use by individuals with mobility disabilities or severe physical disabilities or spinal cord injury. This is a retrofit weighing system that uses four transducers to turn an entire bed into a scale system. It works with all Big Boyz bariatric bed models, including King's Pride and Queen's Pride (see separate entries). The user’s weight is displayed on a 16-character dot matrix liquid crystal display (LCD) with L.E.D

Big John Toilet Seat

The Big John Toilet Seat is a wide elevated toilet seat designed for use by individuals with balance or mobility disabilities, those requiring a larger seat area, or obese individuals. This toilet seat features an ergonomic design that includes a larger and more comfortable opening and a contoured sitting surface that is two inches larger than standard toilet seats. It is available with a closed or open front. Other features include stabilizing synthetic rubber bumpers that keeps the seat from s

Boss Hd Equalizer Bariatric Tilt System

The BOSS HD Equalizer Tilt System is a powered tilt-in-space system designed for use by individuals with mobility, neurological or severe physical disabilities. This tilt-in-space system is designed to be mounted on a heavy-duty power wheelchair base (not included) such as the PaceSaver BOSS 6 powered wheelchair (see separate entry). CONTROLS: Integrated programmable Shark joystick controller. A swing-away controller mount and attendant control are optional. SEAT (DxW): (18 to 26) x (22 to 30) i

Bounder, Bounder Plus, & Big Bounder Manual Gurney

The Bounder, Bounder Plus, and Big Bounder Manual Gurneys are manual stretcher wheelchairs designed for use by individuals with severe physical disabilities or spinal cord injury. FRAME: Black powder-coated tube frame with reinforced side and end rail mounts, made using all steel TIG welded box frame construction. Options include frame reinforcements; side and end rails; drink holder; frame colors other than black and upholstery; sliding drawer at front of gurney; storage tray located approximat

Bounder, Bounder Plus, & Big Bounder Power Gurney

The Bounder, Bounder Plus, and Big Bounder Power Gurneys are powered stretchers designed for use by individuals with severe physical disabilities or spinal cord injury. FRAME: Black powder- coated steel tube frame with reinforced side and end rail mounts, made using TIG welded box frame construction. CONTROLS: UE1D electronics featuring six programs with a bi-directional select switch and electric brake controls. Options include a programmer for electronics; attendant controls; custom hand contr

Breez 1025

The Breez 1025 is a powered transport wheelchair designed for indoor or outdoor use by individuals with lower extremity, mobility, neurological, or severe physical disabilities or spinal cord injury. The chair is operated by an attendant or caregiver who walks behind the chair. This chair is equipped with a standard stainless steel IV pole. FRAME (HxLxW): 42.5 x 27 x 26 inches. The overall length with footrests is 50 inches. The chair has a steel platform under the seat for carrying cargo and fr

Bridge Threshold Ramp (Models Tr1, Tr1.5, Tr2, & Tr3)

The Bridge Threshold Ramp is designed to provide wheelchair or scooter access over single steps or doorways. The ramp is made from aluminum with a non-slip surface. OPTIONS: Light duty plate for creating a bridge between the ground and doorway threshold. DIMENSIONS (LxW): 8 x 36 (model TR1), 10 x 36 (model TR1.5), 14 x 36 (model TR2), or 18 x 36 inches (model TR3). Rise is 1 inch (model TR1), 1.5 inches (model TR1.5), 2 inches (model TR2), or 3 inches (model TR3). CAPACITY: 750 pounds.

Butler Inclined Platform Wheelchair Lift

The Butler Inclined Platform Wheelchair Lift is an interior wheelchair lift designed for use to enable wheelchair users to traverse stairways. The lift has two rails that mount on the landings at the top and bottom of the stairs with no modifications needed to walls. The power unit can be located almost anywhere at the bottom of the stairs including through an adjoining wall. The lift has three directional switches on the platform, at the upper landing, and at the bottom landing. All switches ar

Cambridge Elevating Deck Lift

The Cambridge Elevating Deck Lift is an outdoor home elevator designed for use by individuals with mobility, lower extremity, or walking disabilities or spinal cord injury. This compact unit can lift an individual using a wheelchair or walker up to six feet to the level of a porch or doorway. The unit is engineered to endure harsh weather conditions, with weather-protected controls and powder coated panels to resist corrosion. A manual lowering function is included. Custom cab configurations are

Carelift Wheelchair Lift

The Carelift Wheelchair Lift is a commercial elevator designed for use by individuals with walking, mobility or lower extremity disabilities, spinal cord injury or arthritis and others who use wheelchairs. The Carelift is a heavy-duty, fully enclosed elevator with a manual or automatic swing door. It can be fitted into a new or existing building with up to 6 stories. The elevator requires an 8-inch pit and 96 inches of overhead space. The interior of the cab has Melamine wall panels with stainle

Cargo Wedge 250

The Cargo Wedge 250 is a cargo area threshold cover designed for use by people with mobility disabilities who use wheelchairs or scooters. The Cargo Wedge is a large mat made of recycled rubber that overlays a van's or minivan's cargo area to raise the level of the cargo area's floor to the same level as the rear door threshold. The Cargo Wedge can be trimmed with a utility knife or a power saw for a custom fit. It has a non-skid surface. DIMENSIONS (HxLxW): 2.5 x 24 x 48 inches. CAPACITY: 850 p

Church Sanctuary Wheelchair Lift

The Church Sanctuary Wheelchair Lift is an interior wheelchair lift designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. It is intended to provide discrete access to the raised sanctuary of a church. The lift has momentary (constant pressure) control switches on the platform, at the upper landing, and at the bottom landing. It features a twin-rail, chain and sprocket design. The quiet electric motor unit includes a standard battery backup. In the e

Converta Step

ConvertaStep is an incline platform lift that is designed for use by individuals with limited mobility and require assistance to navigate stairs. The ConvertaStep is constructed of heavy, weather-coated steel that can lift up to 750 pounds. Its smooth lift raises in 8 to 15 seconds and is 31 inches wide to accommodate most chairs and other mobility devices. It is designed to be inconspicuous to the eye and blends easily with any home decor. The small, cost-effective lift comes in 3 sizes and is

Courtroom Rostrum Wheelchair Lift

The Courtroom Rostrum Wheelchair Lift is an interior wheelchair lift designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. It is intended to provide discrete access to an auditorium or courtroom. The lift has momentary (constant pressure) control switches on the platform, at the upper landing, and at the bottom landing. It features a twin-rail, chain and sprocket design. The quiet electric motor unit includes a standard battery backup. In the event

Custom Expansion Beam (Model 7005)

The Custom Expansion Beam, model 7005, is an addition to the Custom Support Structure (see separate entry) designed to provide additional eye bolts for suspended equipment. This structure allows you to achieve diagonal, vertical, four corner and 90 degree movement without taking up additional space. DIMENSIONS: Beam is 36 inches. CAPACITY: Working load is 700 pounds. WEIGHT: 55 pounds.

Decpac Multipurpose Ramp (Model Mp44)

The Decpac Multipurpose Ramp, model MP44, is a portable ramp designed for use to provide access to vans or steps for individuals with mobility or lower extremity disabilities or spinal cord injury. This four-panel folding ramp can be used for a rise up to 13 inches over steps at home or to enter the side of a minivan. When folded it can fit into a van and slide under a seat. The ramp is constructed from laminated fiberglass. The top surface has a textured non-slip tread and the edges are marked

Decpac Multipurpose Ramp (Model Mp55)

The Decpac Multipurpose Ramp, model MP55, is a portable ramp designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. It can be used as a temporary wheelchair ramp in a rented home or in a building that does not have homes, such as one that has historical significance. The ramp can accommodate a rise of up to 16 inches. It is made from laminated fiberglass. The top surface has a textured non-slip tread and the edges are marked with a caution stripe. Th

Decpac Multipurpose Ramp (Model Mp66)

The Decpac Multipurpose Ramp, model MP66,is a portable ramp designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. It can be used for a rise of up to 20 inches. It has four laminated fiberglass panels that are secured with a hook and loop strap when folded. The top surface has a textured non-slip tread and the edges are marked with a caution stripe. The top edge is indicated with a label and has a thick, grooved rubber pad to hold at the edge of the

Decpac Multipurpose Ramp With Edge Barrier (Model Mpeb44 )

The Decpac Multipurpose Ramp with Edge Barrier, model MPEB44, is a ramp designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. It is a four-panel folding ramp with side barriers to help keep a wheelchair, scooter or stroller on the ramp. This ramp can be used for entryways with steps or to enter or exit a minivan on the side. The ramp can be used for a rise up to 13 inches. When folded the ramp can fit in a van and slide under a seat. The ramp is mad

Decpac Multipurpose Ramp With Edge Barrier (Model Mpeb55)

The Decpac Multipurpose Ramp with Edge Barrier, model MPEB55, is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This collapsible four panel ramp can fit a rise of up to 16 inches. It fits in the side of a minivan, but when folded is compact enough to store under the seat of the van. Constructed from laminated fiberglass. its top surface has a textured non-slip tread and the edges are marked with a caution stripe. The top edge

Decpac Multipurpose Ramp With Edge Barrier (Model Mpeb66)

The Decpac Multipurpose Ramp with Edge Barrier, model MPEB66, is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This ramp can accommodate a rise of up to 20 inches, and it can be used for van access. Constructed from laminated fiberglass, its top surface has a textured non-slip tread and the edges are marked with a red caution stripe. Edge barriers are included for safety. The top edge is indicated with a label and it has a th

Decpac Personal Mini Ramp (Model Mp24)

The Decpac Personal Mini Ramp, model MP24, is a portable curb or threshold ramp designed for use by individuals with mobility disabilities. The ramp is small enough to carry in a bag on a wheelchair and can be stored in a vehicle or at home. The ramp is made from laminated fiberglass. The top surface has a textured non-slip tread and the edges are marked with a caution stripe. The top edge is indicated with a label and has a thick, grooved rubber pad to hold at the edge of the step. The rubber g

Decpac Personal Standard Ramp (Model Mp210)

The Decpac Personal Standard Ramp, model MP210, is a portable curb or threshold ramp designed for use by individuals with mobility disabilities. This ramp can be used to navigate over curbs or thresholds with a rise of up to 9 inches, and it is small enough to be carried in a bag on a wheelchair. The ramp is constructed from laminated fiberglass. The top surface has a textured non-slip tread, and the edges are marked with a caution stripe. The top edge is indicated with a label and has a thick,

Deluxe Bariatric Commode (Model 16B306A)

The Deluxe Bariatric Commode, model 16B306A, is designed for use by individuals with mobility disabilities. The welded frame of this commode is constructed of one-inch steel tubing that is zinc plated and powder coated for durability. Features include an extra-large seat, complete pail, and the ability to fit over most toilets. DIMENSIONS (LxW): 18.5 x 27.75 inches. The height under the seat adjusts from 17.5 to 21.5 inches; the seat height is 22 inches. The width between the arms is 25.5 inches

Deluxe Transfer Board (Models Nc94205 & Nc94205-B)

The Deluxe Transfer Board, models NC94205 and NC94205-B, is designed to assist people who use wheelchairs. The Deluxe Transfer Board (NC94205) is made from 0.5-inch thick birch and tapers at both ends for transfers. The Bariatric Transfer Board (NC94205-B) features two hand holes and a heavy duty 9 ply birch wood base with 3 additonal piles form-laminate on top. CAPACITY: 450 pounds for NC94205 and 650 pounds for NC94205-B. DIMENSIONS (WxL): 8 x 24 inches for NC94205 and 10 x 32 inches for NC942

Diamond Homecare Bed

The Diamond Homecare Bed is a motorized bed designed for use by individuals with obesity and severe physical or mobility disabilities or spinal cord injury. This bed is available in semi-electric and full electric models with Trendelenburg, Reverse Trelenburg, and cardio-chair positions. The bed has two electric drive modules and is equipped with a manual emergency crank and a hand control. The bed deck is thermoformed plastic. The frame splits in half for transportation and assembly and has fou

Digital Wheelchair Scale (Model Mph072241)

The Digital Wheelchair Scale, model MPH072241, is a digital wheelchair scale designed for use by individuals with mobility disabilities or spinal cord injury. This scale has a non-skid platform with ramp to accommdate users in wheelchairs or straight leg chairs, as well as ambulatory users. Other features include vertical fold-up and heavy-duty wheels for storage and transport. The scale is accurate to 0.2 pounds. POWER: Uses battery. DIMENSIONS (LxW): 28 x 32 inches. CAPACITY: 800 pounds.

Eagle Single Rider Vehicle With Standard Seat

The Eagle Single Rider Vehicle with Standard Seat is an adapted golf cart and personal electric vehicle designed for use by individuals with walking or balance disabilities, arthritis or limited stamina. This single rider golf car allows the user to play golf without getting out of the cart. When the user approaches a golf ball, he or she can position the vehicle, put it in “park,” and then rotate the seat and hit the ball while seated. The frame/chassis is made of welded tubular painted steel a

Eagle Single Rider Vehicle With Tilt Seat (Model 724Ts)

The Eagle Single Rider Vehicle with Tilt Seat, model 724TS, is an adapted golf cart and personal electric vehicle designed for use by individuals with walking or balance disabilities, arthritis or limited stamina. This single rider golf car allows the user to play golf without getting out of the cart. When the user approaches a golf ball, he or she can position the vehicle, put it in “park,” and then rotate the seat and hit the ball while seated. The frame/chassis is made of welded tubular paint

Eas Ille Lift Chair Ii (Model 196)

The EAS ILLE Lift Chair II, model 196 is a powered bath lift for hydrotherapy. Features include a handheld pushbutton controller, a U-shaped base, casters with a foot controlled locking and release device, a removable seat with tubular armrests and padded headrest, and handles on the back of the unit for attendant propulsion. POWER: Rechargeable battery. CAPACITY: Maximum user weight is 600 pounds.

Easy Toilet Riser

The Easy Toilet Riser is a toilet riser designed to elevate a toilet for people with mobility or balance disabilities. This unit attaches to the floor and is designed to fit toilets with a base that is 14 inches or less in length. The unit is constructed of ridged poly vinyl chlorate and elevates the entire toilet by 4 inches. It is easy to clean and can be used in homes or commercial facilities. The unit comes with two 6-inch closet bolts, two wax rings, one extended water pipe, two washers, tw

Ec+ Extra Care Bariatric Transport Chair (Model 6850)

The EC+ Extra Care Bariatric Transport Chair, model 6850, is a powered transport chair and stretcher designed for use by individuals with obesity and mobility, neurological, or severe physical disabilities. It converts from a chair to a stretcher in order to facilitate transport and transfers. FRAME: In stretcher position, height is adjustable from 24.5 to 32.5 inches. Overall greatest width is 33.5 inches. There is a full width push handle. CONTROLS: Electric operation with pendant controls. SE

Eclipse Residential Elevator

The Eclipse Residential Elevator is a home elevator designed for use by individuals with mobility disabilities or who use wheelchairs. This elevator can travel up to 60 feet, with up to six stops. Safety features include a stop switch; battery-powered emergency lowering and lighting; hand crank for manual lowering; motor brake; lockable control panel; elevator door interlocks; stop switch in car; in use indicator lights on hall stations; and, slack chain brake system. Other standard features inc

Elevator 700 Patient Lift

The Elevator 700 Patient Lift is a seat transfer lift designed for use by individuals with balance, standing, mobility and walking disabilities or arthritis or spinal cord injury. This wheeled lift is lightweight and intended as an aid in lifting a person from floor level to a maximum height of 31 inches and transporting him or her, while seated, over short distances. It can be used in the home or in institutions. The lift's frame is constructed of powder coated, scratch resistant aluminum. It a

Elevette 2100 Convenience Elevator

The Elevette 2100 Convenience Elevator is a home elevator designed for use by individuals with mobility disabilities. This elevator can be placed in a shaft or freestanding. Cab features include an aluminum frame with custom snap-in panels in a variety of hardwoods, laminates, or acrylics; a choice of an aluminum collapsible gate or an accordian gate in wood and/or acrylic, and automatic safety devices. The drive system is available with a winding drum, monorail HydraRide, or CD2200 winding drum

Elevette 3400 Style Elevator

The Elevette 3400 Style Elevator is a home elevator designed for use by individuals with mobility disabilities. This elevator can be placed in a shaft or freestanding. Cab features include smooth walls with square, flush corners; a choice of an aluminum collapsible gate or an accordian gate in wood and/or acrylic, and automatic safety devices. The drive system is available with a winding drum, monorail HydraRide, or CD2200 winding drum and hydraulic system. DIMENSIONS: Standard sizes are up to 1

Elevette Elegance Elevator

The Elevette Elegance Elevator is a home elevator designed for use by individuals with mobility disabilities. This elevator can be placed in a shaft or freestanding. Cab features include a choice of raised or recessed panels, solid wood with hardwood veneer center panels, a choice of an aluminum collapsible gate or an accordian gate in wood and/or acrylic, and automatic safety features. The drive system is available with a winding drum, monorail HydraRide, or CD2200 winding drum and hydraulic sy

Emergency Chair (Model 400)

The Emergency Chair, model 400, is an emergency evacuation carrier designed for the quick evacuation of individuals with severe physical disabilities and cognitive disabilities from multi-floor buildings. It is designed to go both up and down stairs with the ability to quickly change directions in the event of an obstruction. There are multiple points of lift and it negotiates stairs easily. Made of fire-retardant material, it is equipped with built in leg straps and a harness for secure transp

Excel Shuttle (Models Mds809650, Mds809750, Mds809850 & Mds809585)

The Excel Shuttle, models MDS809650, MDS809750, MDS809850 and MDS809585, is a heavy-duty wheelchair designed for use by heavy or obese adults with mobility or lower extremity disabilities or spinal cord injury. The chair is latex-free. FRAME: Stainless steel frame with double cross brace. The wheels have a triple axel to adjust the hemi height of the seat. SEAT (WxD): 24 x 20 inches (MDS809650); 26 x 20 inches (MDS809750); 28 x 20 inches (MDS809850); and 30 x 20 (MDS809585). The seat has polypro

Express Ramp

The Express Ramp is a ramp for a rail car designed for use by individuals with mobility disabilities. When deployed, this stainless steel ramp bridges the gap between the rail car door and the station platform. When not in use, it stows in an unobtrusive vestibule in the floor of the rail car. The ramp's operation is fully automatic using a drive system that is compatible with existing rail car controls. Manual backup operation is also available. DIMENSIONS (LxW): Maximum usable bridgeplate area

Extra Care Bariatic Bed (Models 4054Sd & 4054Sdx)

The Extra Care Bariatric Bed, models 4054SD and 4054SDX, is a motorized, reinforced bed designed for use by individuals with obesity and severe physical disabilities or spinal cord injury. This bed features a two-piece frame with powered height adjustment, fowler backrest and leg lift. Model 4054SDX also has powered Trendelenburg and reverse Trendelenburg. It has a battery backup and a standard remote control. OPTIONS: Scale system; over-bed trapeze transfer aid; bariatric mattress; bolsters; s

Extra Care Bariatric Lift (Models Gt1000 & Gt1000S)

The Extra Care Bariatric Lift, models GT1000 and GT1000S, is a powered transfer lift designed for use with individuals with balance, lower extremity and severe physical disabilities, obesity or spinal cord injury. The freestanding unit has a mobile base with four casters. The rear casters lock. The manually adjustable legs extend horizontally to increase the length of the base and enhance stability; the legs retract for storage. The base supports a vertical support from which an angled boom ext

Extra Care Bariatric Lift (Models Gt700 & Gt700S)

The Extra Care Bariatric Lift, models GT700 and GT700S, is a powered transfer lift designed for use with individuals with balance, lower extremity and severe physical disabilities, obesity or spinal cord injury. The freestanding unit has a mobile base with four casters. The rear casters lock. The manually adjustable legs extend horizontally to increase the length of the base and enhance stability; the legs retract for storage. The base supports a vertical support from which an angled boom exten

Extra Care Bariatric Patient Room Recliner (Models 7150 & 7155)

The Extra Care Bariatric Patient Room Recliner, models 7150 and 7155, is a reinforced recliner chair designed for use by individuals with obesity and mobility disabilities or by individuals who require support while sitting. This chair back reclines up to 40 degrees and the leg rest articulates as the back reclines. The manual reclining mechanism is located in the rear of the chair and is intended to be operated by an attendant. The chair also has four locking casters. DIMENSIONS: Model 7150 is

Extra Wide Bariatric Treatment Table (Model 4074)

The Extra-Wide Bariatric Treatment Table, model 4074, is designed for use in physical therapy. This table has an extra-wide upholstered top with extra-thick, high-density urethane foam for bariatric use. The table is constructed from reinforced oak and has three storage cabinets, each with laminate interiors, and one adjustable shelf. The storage cabinet doors have concealed, self-closing Euro-hinges. OPTIONS: Built-in digital scale with 600 pound capacity (model 595). DIMENSIONS (LxW): 78 x 34

Extra Wide Perineal Cutout Tub Transfer Bench (Models Cq-1730Xdl & Cq-1730Xdr)

The Extra Wide Perineal Cutout Tub Transfer Bench is a bariatric bathtub transfer bench designed for use by individuals with mobility disabilities. This extra-wide bench has a perineal opening for personal hygiene and fits standard bathtubs at least 22 inches wide at the center. This bench features vinyl grips on the tubing to prevent marring the tub; a removable short back that discourages reclining; and, "Tube in a Tube" construction for added strength. The bench is available in a wall to left

Extra Wide Tall-Ette Elevated Toilet Seat With Steel Legs (Model F725882000)

The Extra Wide Tall-Ette Elevated Toilet Seat with Steel Legs, model F725882000, is a wide height adjustable toilet seat with an attached safety frame designed for use by heavy individuals with balance or mobility disabilities. The molded plastic elevated seat has attached steel armrests covered with soft contoured foam to assist the user in sitting down or rising from the seat and four steel height-adjustable legs with rubber tips. The unit comes with a Bolt-Down Lok-in-El Bracket. DIMENSIONS (

Extra-Duty Commode

The 5130 Extra-Duty Commode is designed for the larger patient. Its unique design includes offset legs for stability, height adjustable legs and a 26 inch width between arms. The fully welded frame is constructed of 1.25 inch stainless steel tubing and utilizes an oversized seat and pail. The commode comes with a safety-enhancing full-width back rail, cushioned arm rests and non-skid leg tips. DIMENSIONS: 28 inches long x 28 inches high x 21 inches wide. The seat height adjusts from 18 to 24 inc

Eye Bolt Wrap And Swivel Eye Bolt Wrap (Models 7002 & 7001)

The Eye Bolt Wrap, model 7001, is hardware for therapuetic suspension equipment designed to be used with the Custom Support Structure (see separate entry). This device allows the therapist to add as many eye bolts and position them as needed to accomodate the client and the equipment. The "eye" of the Eye Bolt Wrap is slightly larger than the standard Eye Bolt on the Custom Support Structure which will increase its lifespan. Also Available is the Swivel Eye Bolt Wrap, model 7002, which also has

Ez-Access Modular Ramp

The EZ-ACCESS Modular Ramp is a modular ramp designed for use by individuals who use wheelchairs or scooters or who cannot use stairs. The ramp and handrails are made of aluminum, and the ramp has a non-skid surface. The components can be assembled in several configurations that comply with ADA guidelines, including a straight ramp, two sections connected with a 90-degree turn, and two sections connects with a 180-turn. Handrails can be installed on both sides of the ramp in all configurations.

Ez-Access Rollup Ramp

The EZ-Access Rollup Ramp is a portable ramp designed for persons with physical disabilities who use wheelchairs and scooters. Designed to bridge gaps over one step or a curb, the ramp features a durable, non-skid driving surface. The detachable side rails add support and act as a guide for maximum safety. Made of rust-resistant lightweight aluminum, the ramp rolls up for storage in the included nylon bag. DIMENSIONS (LxW): 36 x 30 inches. When rolled for storage, the ramp has a diameter to 6 in

Ez-Access Rubber Threshold Ramp (Models Thr 250-1 & Thr Riser 225-1 Pr)

The EZ-ACCESS Rubber Threshold Ramp is designed for use by persons with mobility disabilities or spinal cord injury who use wheelchairs or scooters. The ramp provides smooth riding over doorway thresholds. Designed for most standard and sliding-door entrances, the ramp is made of rubber from recycled tires. This ramp can be trimmed for lower heights. For thresholds higher than 2.5 inches, risers (model THR RISER 225-1 PR) are available that can be placed under the ramp. DIMENSIONS (HxLxW): 2.5 x

Ez-Access Rubber Threshold Ramp With Beveled Sides (Models Thrw36 150-1)

The EZ-ACCESS Rubber Threshold Ramp with Beveled Sides, model THRW36 150-1, is designed for use by persons with mobility disabilities or spinal cord injury who use wheelchairs or scooters. The ramp provides smooth riding over doorway thresholds. Designed for most standard and sliding-door entrances, the ramp is made of rubber from recycled materials. The ramp can be trimmed for lower heights. DIMENSIONS (HxLxW): 1.5 x 24 x 36 inches (usable surface). The overall width including the beveled sides

Ez-Access Suitcase Advantage Series Ramp (Models As2, As3, As4, As5 & As6)

The EZ-ACCESS SUITCASE Advantage Series Ramp are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface with reflective stripes on each side of the surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to enter some minivans (models AS5 and AS6) and sport utility vehicles (AS

Ez-Access Suitcase Ramp (Models 2, 3, 4, 5 & 6)

The EZ-ACCESS SUITCASE Ramp is a portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. Th1s ramp is made of aluminum and features an non-skid driving surface. The ramp is designed for use over curbs and steps and to enter some minivans (models 5 and 6) and sport utility vehicles (model 6 only). Each ramp has a fold-in-half design for compact portability, and a built-in carrying handle. DIMENSIONS (LxW): 24 x 29 inches (model 2); 36 x 29 inches

Ez-Access Suitcase Signature Series Ramp (Models Ss2, Ss3, Ss4, Ss5, Ss6, Ss7 & Ss8)

The EZ-ACCESS SUITCASE Signature Series Ramps are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to with some minivans, vans and sport utility vehicles. Each ramp divides into two halves by removing two hinge pins, and whe

Ez-Access Threshold Ramp (Models 1, 1.5, 2, 3, 4, 5 & 6)

The EZ-Access Threshold Ramp is designed for persons with physical disabilities who use wheelchairs or scooters. The ramp provides smooth riding over doorway thresholds. Designed for most standard and sliding-door entrances, the ramp is made of durable extruded anodized aluminum and has a long, non-skid driving surface for maximum safety and support. A special finish resists dents and scratches. A flap attachment for sliding door tracks and installation hardware are included. Ramps accommodate t

Ez-Access Trifold Advantage Series Ramp (Models As5, As6, As7, As8 & As10)

The EZ-Access Trifold Advantage Series Ramp is a portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface with reflective stripes on each side of the surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to enter some minivans and sport utility vehicles. Each ramp divides into

Ez-Shopper 8000

The EZ-Shopper 8000 is a four-wheeled scooter designed for use by retail customers with mobility, walking or lower extremity disabilities or spinal cord injury. This model is designed for use in grocery stores and other retail establishments with wider aisles. FRAME (HxLxW): 38 x 55 x 26 inches. The scooter has a heavy duty 1.25-inch steel frame with shock-absorbing and dent-resistant decks. The rear deck flips up to access motor and batteries. It has a reinforced tiller column with an added bra

Flex-Ramp

The Flex-Ramp is a van ramp designed for use by individuals with mobility disabilities. This lightweight aluminum ramp converts a mini-van or full-size van into a wheelchair-accessible vehicle. The ramp is attached to the floor of the vehicle and extended outward when the door is opened. It can also be detached from the floor and moved to another location such as a curb or steps. OPTIONS: Two wheel cart for transporting ramp. SIZES: Mini-van, full-sized van, or extra capacity. DIMENSIONS (LxW):

Fleximove (Models 4011, 4012, & 4016)

The Fleximove, models 4011, 4012, and 4016, is a transfer aid designed for turning, positioning or transferring an individual with mobility disabilities. A padded board with handles and an inner surface of polyester, the unit can be used for moving patients further up in bed, turning over, sideways transfers, or when a patient must be lifted from the floor after falling. Models 4011 and 4012 consist of four handles; model 4016 consists of six handles. DIMENSIONS (LxW): 102 x 43 centimeters (4011

Florlift Multi-Level Vertical Lift (Models Fl-100, Fl-102, And Fl-105)

The Florlift Multi-Level Vertical Lifts (Models FL-100, FL-102, and FL-105) are interior wheelchair lifts designed to provide access between floors for people with physical disabilities or limited mobility. PLATFORM UNIT: Model FL-100 measures 34 x 60 inches and operates through a trap door in the floor that opens and closes automatically. Model 102 lift can be installed in a shaft for open platform loading and measures 32 x 90 inches. Model FL-105 is a totally enclosed short rise platform lift

Fold-A-Way Ramp (Model D-Far-120)

The Fold-A-Way Ramp, model D-FAR-120, is a pair of folding tracks designed for use by individuals with in wheelchairs. Tracks have a slip-resistant surface for traction. Each ramp track comes with two handles for positioning and can be folded for storage. DIMENSIONS (HxLxW): Each track is 4.25 x 120 x 7 7/8 inches. CAPACITY: 550 pounds. WEIGHT: 77 pounds per pair.

Fold-Up Shower Seat (Models 04070P & 04270P)

The Fold-Up Shower Seats are folding shower seats designed for use by individuals with mobility, lower extremity, or balance disabilities or arthritis. These wall-mounted, height-adjustable seats have stainless steel frames and polypropylene molded seats with drainage holes. The removable seat cushion is made of soft feel closed-cell polyurethane foam. When not in use, the seats fold up against the wall and a stainless steel linkage bar keeps the rubber-tipped legs parallel to the wall. DIMENSIO

Fold-Up Shower Seat (Models 04100P & 04200P)

The Fold-Up Shower Seat is a folding shower seat designed for use by individuals with mobility, lower extremity, or balance disabilities or arthritis. The wall-mounted, height-adjustable seat has a stainless steel frame and an open U-shaped polypropylene molded seat for ease in personal cleansing. The seat has a removable cushion made of soft feel closed-cell polyurethane foam. When not in use, the seat folds up against the wall and a stainless steel linkage bar keeps the rubber-tipped legs par

Fold-Up Shower Seat (Models 04110P & 04210P)

The Fold-Up Shower Seats are folding shower seats designed for use by individuals with mobility, lower extremity, or balance disabilities or arthritis. These wall-mounted, height-adjustable seats have stainless steel frames and wide polypropylene molded seats with drainage holes. These seats have a removable seat cushion made of soft feel closed-cell polyurethane foam. When not in use, the seats fold up against the wall and a stainless steel linkage bar keeps the rubber-tipped legs parallel to

Fold-Up Shower Seat (Models 04130 P & 04230P)

The Fold-Up Shower Seats are folding shower seats designed for use by individuals with mobility, lower extremity, or balance disabilities or arthritis. These wall-mounted, height-adjustable seats have stainless steel frames and polypropylene molded seats with drainage holes. These seats include a padded backrest and flip-up armrests. The removable back and seat cushions are made of soft feel closed-cell polyurethane foam. When not in use, the seats fold up against the wall and a stainless steel

Fold-Up Shower Seat (Models 04140P & 04240P)

The Fold-Up Shower Seats are folding shower seats designed for use by individuals with mobility, lower extremity, or balance disabilities or arthritis. These wall-mounted, height-adjustable seats have stainless steel frames and wide polypropylene molded seats with drainage holes. These seats include a padded backrest and flip-up armrests. The removable back and seat cushions are made of soft feel closed-cell polyurethane foam. When not in use, the seats fold up against the wall and a stainless s

Fold-Up Shower Seat (Models 04150P & 04250P)

The Fold-Up Shower Seat is a folding shower seat designed for use by individuals with mobility, lower extremity, or balance disabilities or arthritis. The wall-mounted, height-adjustable seat has a stainless steel frame, molded backrest, flip-up armrests, and a wide, open U-shaped polypropylene molded seat for ease in personal cleansing. The seat and back have removable cushions made of soft feel closed-cell polyurethane foam. When not in use, the seat folds up against the wall and a stainless s

Fold-Up Shower Seat (Models 04160P & 04260P)

The Fold-Up Shower Seat is a folding shower seat designed for use by individuals with mobility, lower extremity, or balance disabilities or arthritis. The wall-mounted, height-adjustable seat has a stainless steel frame, molded backrest, flip-up armrests, and an open U-shaped polypropylene molded seat for ease in personal cleansing. The seat and back have removable cushions made of soft feel closed-cell polyurethane foam. When not in use, the seat folds up against the wall and a stainless steel

Folding Shower Chair (Models Fsc22 & Fsc26)

The Folding Shower Chair is a shower bench designed for use by obese persons who have difficulty showering while standing. FRAME: Folding, rust-proof heavy-duty stainless steel frame with rubber feet protectors. The bench is 20.5 inches tall and folds to 4 inches for storage. SEAT (WxDxH): Model FSC22 is 22 x 19 x 19.5 inches; model FSC26 is 26 x 19 x 19.5 inches. The seat is constructed of double-layer trampoline material rated at 600 pounds. CAPACITY: 600 pounds. WEIGHT: 7 pounds. COLOR: The f

Foldover 1:6 Low Floor Bus Ramp Er7 Series

The FOLDover 1:6 Low Floor Bus Ramp ER7 Series is a bus ramp designed for use by individuals with mobility disabilities. This electric ramp is made of stainless steel and aluminum alloy. It has a 1:16 slope and provides access to low floor buses with a floor height of 12 inches or less. A stainless steel chain and counterbalanced ramp platform allow for manual deployment or stowage. Its mechanism and controls are water resistant. An electro-magnetic latch system secures the ramp in the stowed p

Foldover Ramp (Model Fr2Ss)

The FOLDover Ramp, model FR2SS, is a bus ramp designed for use by individuals with mobility disabilities. This folding ramp can be installed for front or rear entry on a low-floor bus to provide access for passengers with wheelchairs, walkers, shopping carts, or strollers. The ramp has a non-slip surface and stows flat. Its hydraulically operated drive assembly controls platform speed through stowing and deployment. The manual back-up system requires no valve or switch movement. DIMENSIONS (LxW

Freedom Chair (Model 1550)

The Freedom Chair, model 1550, is an emergency evacuation carrier and transport wheelchair designed for use by people with mobility, lower extremity or walking disabilities, spinal cord injury and others who use a wheelchair. The Freedom Chair can be used to evacuate a person on level flooring or on stairs, and it can be used as transport chair indoors and outdoors. FRAME (HxLxW): 24 x 60 x 37 inches. Folding aircraft-grade aluminum frame. Folded dimensions (HxLxW) - 24 x 60 x 11 inches. The fra

Full Electric Bariatric Bed (Models 15300, 15302, & 15303)

The Full Electric Bariatric Bed is a motorized bed designed for use by individuals with severe physical disabilities or spinal cord injury. The bed is height adjustable, and has a heavy-duty frame. OPTIONS: Each size bed is available in a package with a bariatric foam mattress and one or two pairs of "T"-style side safety rails. DIMENSIONS (HxLxW): 18.25 to 26.25 x 88 x 42 inches (model 15300), 48 inches (model 15302), or 54 inches (model 15303). CAPACITY: 600 pounds (model 15300), 750 pounds (m

Genesis Shaftway Vertical Platform Lift

The Genesis Shaftway Vertical Platform Lift is an interior or exterior wheelchair lift designed for use by individuals with spinal cord injury, lower extremity disabilities, or mobility disabilities and others who use wheelchairs. This platform wheelchair lift fits inside a pre-built vertical runway, and can be installed for interior or exterior use. The lift system consists of a drive mast, passenger platform and doors or gates. The platform is enclosed on three sides by galvanized steel panels

Genesis Staage 44 Portable Vertical Wheelchair Lift

The Genesis STAAGE 44 Portable Vertical Wheelchair lift is a wheelchair lift designed for use by individuals who use wheelchairs. This three-wheeled portable lift can be wheeled into place to provide an accessibility solution for low-rise vertical barriers such as stages or podiums. It comes fully assembled for immediate use after setting the upper landing limit to the height required. This lift can reach vertical heights of up to 44 inches. Standard safety features include a lower landing call

Grand Line Extra Tall Adult Crutch (Model 2635)

The Grand Line Extra Tall Adult Crutch, model 2635, is an axillary crutch designed for use by individuals with walking or balance disabilities. Made of Tuff Coat 1-inch diameter steel tubing, this crutch is designed to accommodate extra tall individuals. Each crutch has a large double push button control to adjust its height in 1-inch increments. It has a 5-inch wide hand grip, and its unibody construction provides added strength. DIMENSIONS: Height adjusts from 60 to 68 inches. CAPACITY:700 p

Grand Line Extra-Wide Universal Tall Youth To Tall Adult Folding Walker

The Grand Line Extra Wide Universal Tall Youth to Tall Adult folding walker is a folding adjustable wheeled walker designed for use by individuals with balance, lower extremity, or walking disabilities. This walker is made of Tuff Coat steel tubing with a Tuff Coat steel front frame. Features include a double-button folding mechanism, an over-the-toilet design, angled front legs for stability, double tube cross braces, and side leg braces with patented brace clamps. DIMENSIONS: The height adjus

Gsl Artira Inclined Platform Lift

The GSL Artira Inclined Platform Lift is an interior or exterior wheelchair stair lift designed for use by people with lower extremity, mobility, or physical disabilities or spinal cord injury and others who use wheelchairs and those with limited mobility. This lift can be customized to fit existing stairs and fits straight or curved stairs and can accomodate turning stairways and intermediate landings. The unit folds up when not in use. The platform travels along guide rails mounted to the insi

Handi-Ramp Trak System

The Handi-Ramp Trak System is a pair of portable folding tracks designed for wheelchairs and scooters. Tracks are made from extruded aluminum with a non-skid surface. The pair can adjust to any door width, accommodating even the narrow entries into recreational vehicles or minivans. Tracks come in non-folding, regular folding, and heavy-duty folding versions, and include built-in handles. OPTION: Stabilizer Bar to keep the ramps from moving or sliding while in use. DIMENSIONS: All tracks are 6.7

Handiramp Singlefold Ramp (Models Asf 2, Asf 3, Asf 4, & Asf 5)

The HandiRamp Singlefold Ramp is a portable ramp designed for use by individuals with mobility disabilities or spinal cord injury. Made from durable welded aluminum, the ramp folds in half and can be carried like a suitcase. Its full platform has an anti-slip, high-traction surface, and can accommodate wheelchairs and scooters with various wheel configurations. DIMENSIONS (LxW): 2, 3, 4, or 5 feet x 30 inches. When folded, the ramp is 24 x 16 x 4 inches (model ASF 2), 36 x 16 x 4 inches (model A

Handiramp Van Ramp System Series

The HandiRamp Van Ramp System Series are van ramps designed for use to provide access to vans and mini-vans. The system is mounted with a 3-bolt installation. Ramps are made from either aluminum or expanded metal with non-skid tread ways and wheel guides. All ramps in the series are equipped with spring assisted lifting, and fold up vertically inside the van door to conserve passenger space. OPTIONS: Floor mount; step well mount. DIMENSIONS: 5, 6.5, 7, or 8 feet long. Aluminum ramps are not avai

Handiramp Wheelchair Porch Lift (Models Hpl-50 & Hpl-72)

The HandiRamp Wheelchair Porch Lift is an extrerior wheelchair lift designed for use by individuals with mobility disabilities or spinal cord injury. This porch lift uses a gear box and chain system to raise and lower wheelchairs or scooters. The drive system operates in all weather conditions, from minus 30 degrees to 120 degrees Fahrenheit. With a key-operated, constant-pressure switch, the rider can start, stop, and change directions at any point. The electrical system is placed well above gr

Heavy Duty Bath Seat With Perineal Cutout (Model Cq-1720D)

Heavy Duty Bath Seat with Perineal Cutout, model CQ-1720D, is a bariatric bath seat designed for use by individuals with mobility disabilities. This bath seat has a perineal cutout and fits the contour of a standard bathtub. The frame tubing has vinyl grips to prevent marring the tub. OPTIONS: Floor stand (model 1721) for use in a shower stall. DIMENSIONS (DxW): The seat is 15.25 x 20 inches. The tub must be at least 22 inches wide, measured inside the tub. CAPACITY: 650 pounds.

Heavy Duty Patient Lift (Model Bcwlift)

The Heavy Duty Patient Lift, model BCW750TC, is a powered transfer lift designed to assist in transfering obese patients who have physical disabilities. This lift enables a caregiver to safely and easily lift and move a patient along an overhead track to a bed, chair, bath or commode. It is a powered lift with a transfer device to move the sling along and overhead track to the desired location. The lift track is made of aluminum alloy for lightweight, strength, and durability, and features a dou

Heavy Duty Tub Transfer Bench (Models Cq-1730Fl & Cq-1730Fr)

The Heavy Duty Tub Transfer Bench is a bariatric bathtub transfer bench designed for use by individuals with mobility disabilities. This seat fits standard bathtubs at least 22 inches wide at the center inside the tub. The seat is made using "tube in a tube" construction for added strength. Vinyl grips on the tubing prevent marring the tub. A short back discourages reclining and is also removable. The seat is available with wall to right (model CQ-1730FR) or wall to left (model CQ-1730FL) config

Highlander Commercial Vertical Platform Wheelchair Lift

The Highlander Commercial Vertical Platform Wheelchair Lift is an interior and exterior wheelchair lift designed for use by individuals with spinal cord injury or lower extremity or mobility disabilities and others who use wheelchairs. This lift is a freestanding unit that requires minimal construction to provide access to a building. The lift consists of a drive system and the passenger platform. The platform is enclosed on two sides. Safety features include constant pressure, paddle switch con

Highlander Residential Vertical Platform Lift

The Highlander Residential Vertical Platform Lift is an interior and exterior wheelchair lift designed for use by individuals with spinal cord injury or lower extremity or mobility disabilities and others who use wheelchairs. This lift is a freestanding unit that requires minimal construction to provide access to a home or other structure. The lift consists of a drive system and the passenger platform. The platform is enclosed on two sides. Safety features include constant pressure, paddle switc

Hitch Mounted Ramp

The Mounted Ramp is designed for use by individuals who use powered wheelchairs or scooters. This ramp enables users to load a power chair or scooter into the back of vehicles equipped with a rear hatch or barn-style doors, such as SUVs (sport utility vehicles)and minivans. The universal design is compatible with all lift-gate equipped vehicles and connects to a Class I, II or III trailer hitch with no drilling. This ramp requires only 15 pounds of force to operate. The non-skid metal surface is

Home Care Bariatic Bed (Models 3639 & 3648)

The Home Care Bariatric Bed, models 3638 and 3648, is a reinforced, motorized bed designed for use by individuals with obesity and severe physical disabilities or spinal cord injury. This bed features a split-frame construction with powered height adjustment, fowler backrest and leg lift. Drop-down removable side rails, a footboard, a headboard and a remote control are standard. OPTIONS: Bariatric mattress; emergency battery backup. DIMENSIONS: The length is 84 inches. The width can be adjusted

Homecare Advantage Bed

The Homecare Advantage Bed is a motorized bed designed for use by obese individuals and people with severe physical or mobility disabilities or spinal cord injury. This fully electric bed has eight functions, including raising and lowering the head section; raising and lowering the entire bed; raising and lowering the foot section; and raising or lowering the sections into a Comfort Chair position. FRAME: The heavy-duty steel frame splits in half for transport and includes oak head- and footboar

Horizon Lift Traction Elevator

The Horizon Lift Traction Elevator is a home elevator designed for use by individuals with mobility or walking disabilities. This variable speed traction residential elevator provides a smooth ride and does not require a separate engine room. Supported by three heavy-duty aircraft cables, the lift travels up to 50 feet at a speed of 40 feet per minute. In the event of a power outage, the lift's auto lowering emergency system lowers the lift to the next landing, allowing passengers to exit. The l

Ideaworks Extra Wide Talking Scale

The Ideaworks Extra Wide Talking Scale is a voice output scale designed for use by individuals who are blind or have low vision. This talking scale has a 15-inch platform with a tempered glass top. It features two-person memory tracking (up to 30 memories for each track); a pleasant and easy to hear voice; auto zero and shut off feature; large LCD display; and a low battery indicator. This scale measures in pounds or kilograms. POWER: Uses 1 9-volt battery (not included). DIMENSIONS: 16.2 x 14 x

Inclinator Vl

The Inclinator VL is an interior or exterior wheelchair lift designed for use in churches, schools, meeting halls, offices or homes. Made of 16-gauge steel with a weather-resistant coating, this platform lift is designed for quiet operation and features keyswitch operation, emergency stop, and an emergency alarm. The one horse power (HP) motor is located at the top for ease in servicing. OPTIONS: 42-inch high landing gate, 42-inch high platform gate, an auto-fold ramp, a stationary ramp at the l

Infinity Residential Elevator

The Infinity Residential Elevator is a home elevator designed for use by individuals with mobility or walking disabilities or spinal cord injury. This elevator has a 1:2 cable hydraulic drive for smooth starts and stops and comes standard in a two-station model in a choice of two cab styles. Standard features include a scissor gate, automatic cab lighting, vertical stainless steel keyed control panel, melamine wall panels, in-car digital floor indicator, metal car station buttons with halo light

Inspire Walk-In Shower

The Inspire Walk-In Shower is an accessible roll in shower stall designed for use by individuals with mobility disabilities, including wheelchair users and individuals with arthritis. The shower entrance has bi-fold shower doors that open a full 180 degrees to provide barrier-free access across the entire width of the shower. The shower doors are comprised of a single full height tempered glass panel coupled with two half-height panels. All panels feature tempered raindrop patterns. This accessi

Invacare Ivc 9000 Topaz Wheelchair

The Invacare IVC 9000 Topaz is a folding bariatric adult manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Triple chrome-plated, carbon steel frame. Options include an oxygen carrier, telescoping IV rod, and a crutch/cane carrier. SEAT (LxW): 18 or 20 x 20 to 30 inches in 2 inch increments. The floor-to-seat height is 15.5, 17.5, or 19.5 depending on wheel and caster package. UPHOLSTERY: Black or blue vinyl or nylon. The upholstery is flam

Invacare Ramps (Models Icr630 & Icr330)

The Invacare Ramps are suitcase-style portable ramps designed for use with manual and power wheelchairs and three- and four-wheel scooters. Both models fold and feature a slide-on clip and carrying handle for secure storageand transport. Model ICR330 is a single-fold model and model ICR630 is a multi-fold model. High traction tape on the surface of both models is long-lasting and maintenance-free. DIMENSIONS: Open, model ICR630 is 6 feet long x 30 inches wide and model ICR330 is 3 feet long x 3

Jazzy 1650 (Models 3Ehd-Ss & 3Ehd-C)

The Jazzy 1650, models 3EHD-SS and 3EHD-C, is a bariatric powered wheelchair designed for indoor and outdoor use by large adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 47 x 30.375 inches with a 4.25-inch ground clearance and a 26.75-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame with 8-inch front anti-tip wheels controlled by independent dynamic spring-struts. The chair comes in champagne, gray, candy apple red,

King's Pride 1000 (Models Kp48801, Kp54801, & Kp60801)

King's Pride 1000 is a heavy-duty motorized bed designed for use by individuals with severe physical disabilities or spinal cord injury. The bed has multiple positioning options, including Trendelenberg, reverse Trendelenberg, or cardio chair. Independent head and knee gatch allow personalized positioning. The foot section plateaus to reduce edema of the lower extremities. The bed has a foam mattress with Ventrex ticking and an eight-button control for all functions. OPTIONS: Digital bed scale (

Legacy Residential Elevator

The Legacy Residential Elevator is a home elevator designed for use by individuals with walking, mobility or lower extremity disabilities or arthritis and others who use wheelchairs or have difficulty walking up or down stairs. This elevator requires no mechanical room. It is operated by an inverted controlled winding drum unit utilizing steel core aircraft wire rope, which can be installed the top or bottom of the hoistway, making the Legacy a good option when there is no space for a separate m

Lexa Lift & Lexa 600

The Lexa Lift and the Lexa 600 are powered transfer lifts designed for use with individuals with mobility disabilities. These lifts adapt to a variety of transfer needs, from bed and floor to bath, commode, wheelchair, and more. The electronic patient positioner adjusts the user to a range of positions from fully lying down to sitting. Both models feature a manual or electrically width-adjustable U-shaped base with four heavy-duty ball bearing caster wheels, two with parking brakes for added sta

Liftem

Liftem is a bariatric transfer lift designed for use by obese individuals with severe physical disabilities or spinal cord injury. This powered overhead sling lift raises the user with a four-point lifting bar. The user's starting level can range from floor level up to 52 inches above the floor. The lift has an aluminum steel frame with an underbed clearance of 4.5 inches and an arm that rotates up to 60 degrees. It moves on front and rear casters with brakes in the rear. OPTIONS: Combination sl

Literamp Portable 1-Piece Wheelchair Ramp

The LiteRamp Portable 1-Piece Wheelchair Ramp is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury or others who use a wheelchair or scooter. The ramp has carrying handles, folds in the middle, and can be carried like a suitcase. It is made from aircraft aluminum, and it is fully covered with safety non-skid tape. This ramp is weather resistant so it can be left outdoor year-round. It is self-supporting to prevent slippage on sta

Literamp Portable 2-Piece Wheelchair Ramp

The LiteRamp Portable 2-Piece Wheelchair Ramp is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. The ramp can be taken apart into two separate pieces side by side. Each piece folds length-wise and has two handles so it can be carried like a suitcase. The ramp can accommodate 3-wheel scooters as well as manual or electric wheelchairs. It can be used on curbs, decks, and steps; on side doors of vans; on back doors of most vans an

Low Bed 800 (Model Lb3848)

The Low Bed 800, model LB3848, is a motorized bed designed for use by individuals with severe physical disabilities or spinal cord injury. Includes a foam mattress with Ventrex ticking and an eight-button control for all functions. The bed has multiple positioning, including Trendelenberg, reverse Trendelenberg, cardio chair, and personalized positioning with independent head and knee catch. The foot section plateaus to reduce edema of the lower extremities. POWER: Uses 115 volts. OPTIONS: Digit

Lp11 Mobile Lifting Platform

The LP11 Mobile Lifting Platform is an interior or exterior wheelchair lift and wheelchair lift for rail cars designed to aid people in wheelchairs to enter and exit structures with doorways above ground level or trains with doorways that are above the level of the train station platform. The lift has railings on both sides and ramps on both the front and back ends that can drop down past horizontal and raise into a vertical position. It has a base with four wheels so it can be moved into positi

Lp12 Lifting Platform

The LP12 Lifting Platform is an interior or exterior wheelchair lift and wheelchair lift for rail cars designed to aid people in wheelchairs to enter and exit raised platforms or stages, structures with doorways above ground level, or trains with doorways that are above the level of the train station platform. The LP12 has a wheeled base, and it is moved into position before use with a control arm that extends from one side of the base. There is a central wheel lock to fix the unit’s position. T

Ls600 Bariatric Toilet Lift

The LS600 Bariatric Toilet Lift is a portable toilet seat lift and commode with seat lift designed for use by heavy individuals with balance, lower extremity or mobility disabilities. The unit can be wheeled from room to room and bedside to bathroom using a rear push bar. for use as a power bedside commode or over-the-toilet motorized lift. During toilet transfer, it reduces the physical force required by caregivers to help users on and off the toilet. The LS600 can be configured as a height-adj

Luxury Lift 950 Hydraulic Elevator

The Luxury Lift 950 Hydraulic Elevator is a home elevator designed for use by individuals with mobility or walking disabilities. This hydraulic elevator features a large cab with a large payload capacity, and can travel up to 50 feet at a speed of 40 feet per minute. It has cab walls made from 7-ply custom cabinet grade material. The cab and its interior are custom made, and come with an aluminum anodized scissor gate or accordion style solid gate. The elevator's automatic emergency-lowering fea

Map System

The MAP System is a bedside pressure evaluation system designed for use by people with limited mobility who are at risk of developing a pressure ulcer and people with an existing pressure ulcer. The system features a pressure sensing mat containing a textile that generates a small electrical signal proportional to the pressure on it. The signal is read, interpreted by the system's software, and displayed on a handheld display unit using a color scheme to identify high and low pressure points. Th

Mart Cart Deluxe Edition (Models 02002 De & Del)

The Mart Cart Deluxe Edition, models 02002 DE and DEL, is a shopping cart scooter designed for use by individuals with mobility disabilities. This scooter can negotiate 25-inch aisles in retail stores. FRAME: 1.25 inch steel frame with basket bra, folding produce tray, and deluxe trim. CONTROLS: Touch pad controls with Neutral-Select. FWD: Front wheel drive with front hub motor. SEAT: Adjustable seat. WHEELS: Steel wheels with 10-inch tires. POWER: Uses one 12-volt, 70-amp battery. CAPACITY: 700

Mart Cart E-Se & E-Sel

Mart Cart E-SE and E-SEL are shopping cart scooters designed for use by individuals with mobility disabilities. This scooter has a large shopping basket and can negotiate 25-inch aisles. FRAME: 1.25-inch steel frame. CONTROLS: Touch pad controls with Neutral-Select. FWD: Front wheel hub drive. SEAT: Adjustable seat. WHEELS: Steel wheels with 10-inch tires. POWER: Uses one 12- volt, 70-amp battery. CAPACITY: 700 pounds (550 pounds for rider plus 150 pounds basket capacity).

Mart Cart Xti-12

Mart Cart XTi-12 is a shopping cart scooter designed for use by shoppers with mobility disabilities. This electric shopping cart turns within the diameter of its rear axle, allowing a 180-degree turn in narrow store aisles. The scooter is equipped with a basket, horn, and reverse warning alarm. Signage includes "For Our Valued Customers" and "No Children in Basket." Operating instruction decals are available in Spanish, Portuguese, or French. FRAME (HxLxW): 37 x 55 x 25 inches. This scooter has

Maxi Rest Bariatic Bed (Models 4748B, 4748D, 4748Dx, 4748Sb, 4748Sd & 4748Sdx)

The Maxi Rest Bariatric Bed, models 4748B, 4748D, 4748DX, 4748SB, 4748SD and 4748SDX, is a motorized bed designed for use by individuals with obesity and severe physical disabilities or spinal cord injury. This bed features standard powered height adjustment, fowler backrest and leg lift and optional powered Trendelenburg and reverse Trendelenburg. It has a battery backup and a standard remote control. A one-piece frame (models 4748B, 4748D and 4748DX) or two-piece frame (models 4748SB, 4748SD

Maxi Sky 1000

The Maxi Sky 1000 is a bariatric ceiling lift designed for use by individuals with mobility disabilities, spinal cord injury, or severe physical disabilities. This bariatric lift system enables a single caregiver to perform transfers using the handset control without manual lifting. The lift cassette can be installed on a semi-permanent gantry or a permanent ceiling-mounted straight track. A full range of bariatric loop or clip slings can be attached to the four-point sling bar. Regulation of l

Maxi Sky 600

The Maxi Sky 600 is a powered overhead transfer lift designed for use by individuals with mobility disabilities, spinal cord injury, or severe physical disabilities. This ceiling lift has a modular track system that allows the track layout to be adapted to a specific working space. The lift can be used for routine transfers of non-ambulatory individuals. A complete range of loop or clip slings is available for use on the applicable 4-point or 2-point spreader bar. The unit can also be used with

Maxi-Lift Bariatric Trapeze (Model 5160)

The Maxi-Lift Bariatric Trapeze, model 5160, is a trapeze designed for use in in-bed positioning with individuals with obesity, mobility or lower extremity disabilities, or spinal cord injury. The freestanding unit consists of triangular trapeze suspended a boom extending from a vertical triangular frame mounted on a low-profile base that fits under a bed frame so that the trapeze hangs over the bed. DIMENSIONS (LxW): 61 x 26 inches (base). Overall height is 68 inches. The boom extends 35 inche

Maxi-Lift Bariatric Trapeze (Model 5165)

The Maxi-Lift Bariatric Trapeze, model 5165, is a trapeze designed for use in in-bed positioning with individuals with obesity, mobility or lower extremity disabilities, or spinal cord injury. The freestanding unit consists of triangular trapeze suspended a boom extending from a vertical triangular frame mounted on a low-profile base that fits under a bed frame so that the trapeze hangs over the bed. DIMENSIONS (LxW): 61 x 26 inches (base). Overall height is 68 inches. The boom extends 35 inche

Maxi-Lift Bariatric Trapeze (Model 5171)

The Maxi-Lift Bariatric Trapeze, model 5171, is a trapeze designed for use in in-bed positioning with individuals with obesity, mobility or lower extremity disabilities, or spinal cord injury. The freestanding unit consists of triangular trapeze suspended a boom extending from a vertical triangular frame mounted on a low-profile base that fits under a bed frame so that the trapeze hangs over the bed. This model of the Maxi-Lift Bariatric Trapeze is specially designed for use with the Gendron Max

Merry Walker Ambulation Device

The Merry Walker Ambulation Device is a folding wheeled walker with a seat designed for use by individuals with balance or walking disabilities. This device is bottom-weighted for stability and has a wide base to prevent tipping. FRAME: Folding black steel frame that completely surrounds the user. The walker is equipped with an easy-open lock bar for transfers. The frame is 29 inches long and is available in a 27-inch wide Institutional model or a 23-inch wide Homecare model. SEAT: Washable se

Mighty Rest Rehabilitation Bed

The Mighty Rest Rehabilitation Bed is a motorized bed designed for use by obese individuals. The bed is available in full electric and semi-electric models and includes a high-density, fire-resistant foam mattress with staph check covering and a hospital plug. FRAME: The heavy-duty frame splits in half for transport and includes oak head- and footboards and one set of powder-coated half rails. The height adjusts from 13.5 to 30 inches. Chrome half-rails and a second set of powder-coated half rai

Millennium Series Lift

The Millennium Series Lift is a platform van lift designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This fully hydraulic lift is designed for installation in the side or rear door of a full-size van. It has a hand-held control and on-lift controls mounted on an arm that extends from the lift frame; a remote control is optional. The Millennium Series also features a manual backup system; an outboard roll top that engages in the fully up position

Mirage Transit

Mirage Transit is a bus lift designed for use by individuals with mobility disabilities. Constructed of steel and aluminum, this underfloor lift stows away in an enclosure beneath the vehicle floor when not in use, leaving the doorway clear. The enclosure also protects the lift from rain, snow, and dirt. The lift raises, lowers, stows and deploys at the touch of a button, using hydraulic power provided by a remotely located hydraulic Power Pak. Manual backup is standard. POWER: Hydraulic Power P

Mjm Bariatric Reclining Shower Chair (Model 196-26-Bar)

MJM Bariatric Reclining Shower Chair, model 196-26-BAR, is a bariatric caster shower commode designed for use by individuals with mobility, balance, or neurological disabilities or spinal cord injury. The chair has a PVC plastic frame and features a full-support commode seat, an elevating legrest and sliding footrest, and four threaded-stem casters. The backrest is covered in water-resistant vinyl mesh upholstery. DIMENSIONS(HxWxD): 50 x 30 x 21 inches in overall size. The seat is 22 inches hig

Mjm Bariatric Shower Chair (Model 131-5)

The MJM Shower Chair, model 131-5, is a bariatric caster shower commode designed for use by individuals with mobility, balance, or neurological disabilities. The chair has a PVC plastic frame, a solid seat with commode cutout, a self-storing footrest, and six threaded-stem casters, four of which lock. The backrest is covered with water-resistant vinyl mesh upholstery. DIMENSIONS(HxWxD): 43 x 34 x 28 inches. The seat height is 21 inches and depth is 23 inches. The casters are 5 x 1.25 inches. CAP

Mjm Bariatric Shower Chair (Model 131-5-Ssde)

The MJM Bariatric Shower Chair, model 131-5-SSDE, is a bariatric shower commode designed for use by individuals with mobility, balance, or neurological disabilities. The chair has a PVC plastic frame, armress, a push handle, and an open-front commode seat. The backrest is covered in water resistant-vinyl mesh upholstery. The chair is also equipped with six threaded-stem casters, four locking. OPTIONS: Soft seat. DIMENSIONS(HxWxD): 43 x 34 x 28 inches. The seat is 21 inches high x 23 inches deep.

Mjm Bariatric Shower Gurney (Model 910-B)

The MJM Bariatric Shower Gurney, model 910-B, is a shower stretcher designed for use by individuals with severe physical disabilities or spinal cord injury. The stretcher's frame is made from PVC plastic. Features include a closed-cell pad, safety rails, and eight casters. DIMENSIONS (HxLxW): 31.5 x 79 x 32 inches with safety rails down and 40 x 79 x 32 with the safety rails up. The casters are 5 x 1.25 inches. CAPACITY: 600 pounds.

Mjm Bariatric Shower Gurney (Model 910-Db)

The MJM Bariatric Shower Gurney, model 910-DB, is a shower stretcher designed for use by individuals with severe physical disabilities or spinal cord injury. The stretcher's frame is made from PVC plastic. Features include a closed-cell pad, safety rails, and eight casters. DIMENSIONS (HxLxW): 31.5 x 79 x 32 inches with safety rails down and 40 x 79 x 32 with the safety rails up. The casters are 5 x 1.25 inches. CAPACITY: 900 pounds.

Mjm Shower Chair (Model 130-5)

The MJM Shower Chair, model 130-5, is a bariatric shower commode chair designed for use by individuals with mobility, balance, or neurological disabilities. The chair has a PVC plastic frame, a solid seat with a toileting cutout, and six threaded-stem casters, four locking. The backrest is covered in water-resistant vinyl mesh. DIMENSIONS(HxWxD): 43 x 34 x 28 inches. The seat is 21 inches high x 23 inches deep. The casters are 5 x 1.25 inches. CAPACITY: 700 pounds.

Mjm Transfer Chair (Model 530-S/bariatric)

MJM Transfer Chair, model 530-S/Bariatric, is a three-position bariatric geriatric chair designed for individuals with mobility, balance, or neurological disabilities. This model has a PVC plastic frame, four threaded-stem casters, and a padded seat, back, head bolster, and leg cushion. OPTIONS: Dual drop arms. DIMENSIONS: The external with is 34 inches and the internal width is 30 inches. The casters are 5 inches in diameter. CAPACITY: 700 pounds.

Mobilift Aircraft Wheelchair Lift (Models Ax & Axr)

The Mobilift Aircraft Wheelchair Lift is a wheelchair lift for aircraft boarding designed for use by individuals with mobility disabilities or spinal cord injury. This crank-operated unit can be used to enplane and deplane passengers with disabilities on regional and narrow body aircraft that are ground loading, including 737, 727, DC9, MD80, and F28 planes. The lift deck is supported at all four corners, and is designed to hold standard aircraft boarding chairs. DIMENSIONS (HxLxW): Model AX is

Mobilift Cx Portable Wheelchair Lift

The Mobilift CX is an interior or exterior wheelchair lift designed for use by individuals with mobility disabilities. This manual lift can be moved from place to place as needed on the built-in wheels. In areas of limited space, the user can be loaded on to the lift before it is wheeled into positon. Designed for single operator set-up and use, this lift features silent manual operation, pictogram decals with operating instructions, locking cable, auto fail-safe crank with load-activated drum b

Mobilift Tx Wheelchair Lift For Trains

The Mobilift TX Wheelchair Lift for Trains is a portable wheelchair and scooter lift designed for use by individuals with mobility disabilities or spinal cord injury. This manual lift has a cranking system that allows a 300-pound passenger to be lifted with 11 pounds of crank force. The unit has large wheels to help negotiate rough terrain, and can be loaded onto any size pickup truck for multi-destination use. The lift can be moved on a hard level surface with four pounds of pressure. The lift

Motorhome Lift (Model 124)

The Motorhome Lift, model 124, is a mobile homelift designed for use by individuals with mobility disabilities or spinal cord injury. This steel lift is designed without a platform and operated by suspending the wheelchair and the user from a vertically pivoting arm. The arm pivots down to attach to the occupied wheelchair, then lifts the occupant and chair into the motorhome. Permanently attached nylon webbing attach chair to the arm of the lift (permanent, detachable or temporary visitor hooku

Movi (Model M4000)

The Movi, model M4000, is a transport wheelchair designed for use by people with balance, lower extremity or mobility disabilities or spinal cord injury. The Movi is specifically designed to transport patients within a hospital, and it is intended to be ergonomic for both patients and the hospital staff responsible for moving them. FRAME (HxLxW): 46 x 45 x 27 inches; the push handle height is adjustable between 36 and 52 inches from the floor. The heavy duty frame is white; other colors are opti

Multi-Fold Portable Ramp (Models Amf 5, Amf 6, Amf 7, Amf 8, Amf 10, & Amf 12)

The Multifold Portable Ramp is a portable wheelchair ramp designed for use by individuals with mobility disabilities or spinal cord injury. This ramp can be carried like a suitcase. Made from welded aluminum, it has a full platform with an anti-slip high traction surface. For transport, the ramp separates into two pieces that fold in half, and the panels are locked together with a closure strap. DIMENSIONS (HxLxW): 10 x 60 x 30 inches in use, 9 x 32.25 x 16 inches folded (model AMF 5); 12 x 72 x

Multifold Ramp (Models Wcr530, Wcr630, Wcr730, Wcr830, Wcr1030, & Wcr1230)

The Multifold Ramp is a portable ramp designed to provide wheelchair or scooter access over steps and curbs or into full-sized vans and minivans. This aluminum ramp is hinged to fold in several places for transport. Ramps feature auto-locking and a suitcase-style carrying handle. The ramp is surfaced with anti-slip, high-traction safety tape. DIMENSIONS: Unfolded ramps are 30 inches wide and 5 feet (WCR530), 6 feet (WCR630), 7 feet (WCR730), 8 feet (WCR830), 10 feet (WCR1030), or 12 feet (WCR123

Multipurpose 3-In-1 Wheelchair Scale (Model Sr755)

The Multipurpose 3-in-1 Wheelchair Scale, model SR755, is a digital wheelchair scale designed for use by individuals with mobility disabilities or spinal cord injury. The platform has two wheelchair access ramps, one on the right and one on the left side, and can accommodate wheelchairs, walkers, or standing users. The unit has a 16-character liquid crystal display (LCD) digital display that shows weight in either pounds or kilograms. It has built-in wheels and auto power shut down after 35 seco

Multipurpose 3-In-1 Wheelchair Scale With Oversized Platform (Model Sr755L)

The Multipurpose 3-in-1 Wheelchair Scale, model SR755L, is a digital wheelchair scale designed for use by individuals with mobility disabilities or spinal cord injury. The platform has built-in wheels and dual ramps, and can accommodate walkers, wheelchairs, and standing users. The scale has a 16-character liquid crystal display (LCD) digital display that shows weight in either pounds or kilograms. This unit is equipped with auto power shut down. POWER: Uses six D cell batteries and has a low-ba

National Ramp Modular Ramp System

The National Ramp Modular Ramp System is a modular ramp designed for use by individuals with mobility disabilities or spinal cord injury. The ramp modules can be installed in permanent, semi-permanent, or temporary situations and is intended for commercial or residential use. Units are made of high-strength, non-flammable aluminum, and require no painting or sealant. The grooved aluminum surface is slip resistant with open mesh to let rain and snow through. Handrails are included on all modules.

O Frame By Smirtwaite

The O Frame by Smirthwaite is an indoor free standing suspension system for use with a variety of Smirtwaite sensory swings and bolsters. Made from tubular steel it can handle a capacity of 300 kilograms (661 pounds). The O Frame can be secured to the floor for extra stability. OPTIONS: The O Frame can be used with Smirtwaite’s Hug ‘n” Hold Bolster, Activity Bolster, Flexi Bolster, Swing Bolster and Swing Platform. SIZES: 1 size available. CAPACITY: 300 kilograms (661 pounds). COLOR: Red, yellow

Opti-Ball

The Opti-Ball is a transparent, inflatable ball designed for therapeutic play, balance training, and other gross motor exercises. CAPACITY: Will support upto 660 pounds. DIMENSIONS: The balls come in diameters of 55, 65, 75, and 95 centimeters.

Optimax

OptimaX is a bariatric seating system designed for use by individuals with neurological or severe physical disabilities. This system can be expanded in three dimensions and is available in tilt-only, recline-only, and tilt/recline configurations. FRAME (HxLxW): Back height plus 12 x seat length plus 20 x seat width plus 6 inches (tilt-only) or seat width plus 8 inches (recline only and tilt/recline). The frame has powder-coated black wrinkle finish. CONTROLS: Single post 4-position toggle switch

Overlander (Model Pev 2000)

The Overlander, model PEV 2000, is a heavy-duty powered wheelchair designed for indoor and outdoor use by obese individuals with mobility disabilities. FRAME: Heavy-duty suspension frame. CONTROLS: Programmable micro-controller with right- or left-mounted joystick. RWD: Non-slip interlocking rear belt drive. SEAT: No seating system is standard. A solid seat with foam or a solid seat frame are optional. The seat is available in widths ranging from 18 to 28 inches. UPHOLSTERY: Stain-resistant sul

Pacesaver Scout Boss 6 & 6.75

The PaceSaver Scout BOSS 6 and 6.75 are heavy-duty powered wheelchairs designed for indoor and outdoor use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 48 x 28. x 42 to 44 inches. The turning radius is 27 inches, and the ground clearance is 3 inches. These chairs disassemble for transport. Both chairs feature a heavy-duty steel frame with independent coil-spring suspension and includes height-adjustable, rigid front anti-tippe

Pacesaver Scout Boss 6Ns

The PaceSaver Scout BOSS 6NS is a heavy-duty powered wheelchair designed for indoor and outdoor use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 48 x 28.5 x 42 to 44 inches. The turning radius is 27 inches, and the ground clearance is 3 inches. The chair disassembles for transport. This chair features a heavy-duty steel frame with independent coil-spring suspension and includes height-adjustable, rigid front anti-tippers; Stan

Padded Folding Shower Bench (Model Apm4210P)

The Padded Folding Shower Bench is a wall- mounted folding shower seat designed for use by individuals with balance, mobility, neurological, or lower extremity disabilities. This shower seat is hinged on the wall and folds down for use. Features include two stainless steel tubular legs for support and a wide, padded seat. DIMENSIONS: The seat is 23 inches wide and the minimum base width is 32.25 inches CAPACITY: 558 pounds. COLOR: Grey.

Panorama Residential Elevator

The Panorama Residential Elevator is a home elevator designed for use by individuals with walking, mobility or lower extremity disabilities or arthritis and others who use wheelchairs or have difficulty walking up or down stairs. This elevator has several standard and optional features to help the user create a customized elevator that meets individual needs. It can be designed into new home construction or added to existing homes. The Panorama has a 1:2 cable hydraulic drive with a maximum oper

Pathway Lite (Models As2, As3, As4, As5, As6, As7 & As8)

The PATHWAY Lite are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied non-skid surface. Each PATHWAY Lite ramp has a self-adjusting bottom transition plate. DIMENSIONS (LxW): 24 x 32 inches (model AS2); 36 x 32 inches (model AS3); 48 x 32 inches (model AS4); 60 x 32 inches (model AS5); 72 x 32 inches (model AS6); 84 x 32 inches (model AS7); or 96 x 32 inches (mod

Pathway Modular Ramp (Models Pathway Cs4, Cshr4, Cs6, Cshr6, Cs8, Cshr8, Cs10, & Cshr10)

The PATHWAY Modular Ramp are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of aluminum and feature an extruded non-skid surface. Models with the letters "CSHR" in their model number include two side rails. DIMENSIONS (LxW): 48 x 36 inches (models CS4 and CSHR4); 72 x 36 inches (models CS6 and CSHR6); 96 x 36 inches (models CS8 and CSHR8); 120 x 36 inches (models CS10 and CSHR10). The outside width for ramps without

Pediatric Ball Chair (Model Ap 400)

The Pediatric Ball Chair is a posture chair designed for use by children with physical or neurological disabilities. This chair is designed to promote dynamic active sitting to strengthen a child's back and help his/her posture. The chair consists of a frame, with a back rest, that holds a therapy ball as the seat of the chair. The latex-free ball can be inflated to different sizes to accommodate the child. The frame has non-locking casters for mobility, and the four legs are height adjustable.

Pediatric Suitcase Ramp (Models Ap 7055 & Ap 7056)

The Pediatric Suitcase Ramp is a portable ramp designed for use by children with mobility disabilities, neurological disabilities, severe physical disabilities, or spinal cord injury. This portable ramp accommodates pediatric scooters, walkers, and wheelchairs. The ramp is hinged and folds in half to be carried like a suitcase. Made of aluminum, the ramp has a durable, non-skid surfaceand a built-in carrying handle. CAPACITY: 600 pounds. DIMENSIONS (LxW): Model AP 7055 is 5 x 2 feet and model A

Performa Adjustable Mat Platform

The Performa Adjustable Mat Platform is a mat table designed for use in therapy settings. These height-adjustable tables feature a welded steel frame, high-density foam tops with Perma-BLOK vinyl coating as a barrier against germs, abrasions, and stains, and radius padded edges. Height adjustment is accomplished using the attached fold-away hand crank. A set of matching bolsters is included. DIMENSIONS: All models adjust from 20 to 30 inches high. These tables are available in a choice of 4 x 7

Physio Eggs

The Physio Eggs are inflatable rolls designed for therapeutic play, balance training, and other gross motor exercises. These rolls have a ribbed, non-slip texture and are more stable than the Physio Balls (see separate entries). DIMENSIONS: Available in a choice of 16, 20, 24, or 33 inches in diameter. COLOR: From the smallest to the largest size, the colors are yellow, orange, green, and blue. CAPACITY: Rated to support more than 800 pounds.

Physio-Roll

The Physio-Roll is a peanut-shaped inflatable roll designed to provide control and security for individuals with physical disabilities during balance activities. With a saddle-shaped middle, the roll cradles the user and the overall shape limits rotation to forward and backward. Used with or without a blanket, the roll can be used in squeeze play and tactile activities. DIMENSIONS: 12, 16, 22, 28, or 34 inches in diameter. CAPACITY: Up to 250 pounds depending on size. COLOR: Red, yellow, or blue

Pioneer 10 Deluxe Bariatric 4 Wheel Scooter (Model S341)

The Pioneer 10 Deluxe Bariatric 4 Wheel Scooter, model S341, is a heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, headlight, directional signals, and a rear view mirror. FRAME (HxLxW): 47 x 54 x 27 inches. The ground clearance is 4 inches and the turning radius is 62 inches. Anti-tippers are standard. Color choices are red or champagne. CONTROLS: Dynamic DS160A controller with automatic safety steering

Pioneer 9 Deluxe Bariatric 3 Wheel Scooter (Model S331)

The Pioneer 9 Deluxe Bariatric 3 Wheel Scooter, model S331, is a heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, headlight, directional signals, and a rear view mirror. FRAME (HxLxW): 47 x 49 x 27 inches. The ground clearance is 4 inches and the turning radius is 50 inches. Anti-tippers are standard. Color choices are red and champagne. CONTROLS: Dynamic DS160A controller with automatic safety steering

Platform Scale (Model Sr453)

The Platform Scale, model SR453, is a chair scale designed for use by individuals with balance or lower extremity disabilities. It can also be used as a standing scale. The scale comes with a 16-character liquid crystal display (LCD) digital display, with the capability of displaying weight in either pounds or kilograms. The display features weight recall and automatic power shutdown. POWER: Uses 110 or 220 volts alternating current (AC), 50 to 60 Hertz. DIMENSIONS (HxLxW): 1.5 x 24 x 26 inches.

Platform Scale With Oversized Platform (Model Sr453L)

The Platform Scale with Oversized Platform, model SR453L, is a chair scale designed for use by individuals with balance disabilities or lower extremity disabilities. This scale features a 16-character digital liquid crystal display (LCD) with weight displayed either in pounds or kilograms. The platform can also be used as a stand-on scale. POWER: Uses 110 or 220 volts alternating current (AC), 50 to 60 Hertz. DIMENSIONS (HxLxW): 1.5 x 24 x 36 inches. CAPACITY: 1,000 pounds. WARRANTY: Two year li

Platform Scales For Wheelchair (Model 6514)

The Platform Scales for Wheelchair, model 6514, are dual platform scales designed for use by individuals who use wheelchairs. To get total weight registered, the user must add the reading of both scales. A ramp to the platform, which is 2.5 inches off the floor, is included. The scales fold and may be stored on their edge. WEIGHT: The entire unit is 26 pounds. CAPACITY: Will register up to 580 pounds.

Platform Van Lift

Van lift mounts outside rear door. For individual who does not drive, but needs assistance entering and exiting van. Features nonskid surface platform. Requires manual folding and unfolding of platform. Control push button to raise and lower platform. Fits Chevrolet, Ford and Dodge vans. CAPACITY: 700 pounds. DIMENSIONS: Platform size is 45 inches long, 55 inches wide.

Portable Perfolite Fixed Ramp (Models V5, V10 & E1)

The Portable Perfolite Fixed Ramp, models V5, V10 and E1, is a portable two-piece curb ramp designed to enable wheelchair users to get over curbs or steps. The ramp is made from perforated aluminum which does not allow the collection of rain, snow or dirt. It comes as a pair of single-piece tracks and includes a carrying handle. DIMENSIONS (LxW): 21.75 x 8.25 inches (V5); 45.75 x 8.25 inches (V10); or 41.75 x 10.5 inches. CAPACITY: 880 pounds per pair. WEIGHT: 3.5 pounds per ramp (V5); 7 pounds

Portable Perfolite Folding Telescopic Ramp (Models E2/3 & V30)

The Portable Perfolite Folding Telescopic Ramp, models E2/3 and V30, is a portable folding telescoping two-piece ramp designed to enable wheelchair users to get over curbs or steps. The ramp is made from perforated aluminum which does not allow the collection of rain, snow or dirt. It comes as a pair of folding, telescoping tracks and includes a carrying handle. Model E2/3 is recommended for 2 steps, and model V30 is recommended for 3 steps. DIMENSIONS (LxW): 30.25 to 82.5 x 9.75 inches (E2/3);

Portable Perfolite Telescopic Ramp (Models U2, U2/3, & U3)

The Portable Perfolite Telescopic Ramp, models U2, U2/3, and U3, is a portable telescoping two-piece ramp designed to enable wheelchair users to get over curbs or steps. The ramp is made from perforated aluminum which does not allow the collection of rain, snow or dirt. It comes as a pair of single-piece, telescoping tracks and includes a carrying handle. Models U2 and U3 are recommended for curbs and stoops; model U2/3 is recommended for 2 steps. DIMENSIONS (LxW): 45.75 to 91.5 x 7.5 inches (U

Portable Wheelchair Scale (Model 6550)

The Portable Wheelchair Scale, model 6550, is a portable, digital wheelchair scale designed to accommodate wheelchair users without requiring transfers. This dual capacity scale features a L.E.D. readout with pound/kilogram weight selection, folding entrance and exit ramps, and platform with non-skid mats, and transport wheels. POWER: Built-in rechargeable batteries; 120 Alternating Current Volts (VAC). A 60 Hertz adapter with 6 foot power cord is included for recharging. CAPACITY: 1,000 pounds.

Power Air Pump

The Power Air Pump is a non-electric ball inflator designed for use with inflatable therapy balls and rolls. The unit has a push handle, footed base, and three separately sized attachments to fit a variety of inflation tubes. CAPACITY: Will support up to 660 pounds.

Powerlift

PowerLift is a bus lift designed for use by individuals with mobility disabilities. This lift raises and lowers a bus passenger in a wheelchair between ground level and the level of the bus floor. It features a compact design and durable construction. WARRANTY: One year limited warranty; extended warranty available.

Pressure Reduction Mattress

The Pressure Reduction Mattress is a hospital bed foam mattress designed for use by individuals with obesity and accompanying disabilities. All foam and fabric are treated to be anti-microbial and the foam is wrapped in fire barrier material. The top fabric is polyurethane-coated nylon. The mattress is fluid resistant. DIMENSIONS(HxLxW): Available in 7 x 80 x 35 inches, 7 x 84 x 37 inches, 7 x 84 x 46 inches, or 7 x 84 x 52 inches. CAPACITY: 600 to 1,000 lbs. WARRANTY: Two-year warranty against

Pride Heritage 2-Position Partial Recline Chaise Lounger (Model Gl-358Xxl)

The Pride Heritage 2-Position Partial Recline Lift Chair, model GL-358XXL, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair

Pride Silverstar Single Fold Ramp

The Silver Star Single Fold Ramp is a curb or threshold ramp designed for use by individuals with mobility disabilities. This lightweight, portable ramp has an integrated, high traction surface, and can be used to overcome a variety of obstacles at home and during travel. DIMENSIONS (LxW): 2, 3, 4, 5, or 6 feet x 29.5 inches. CAPACITY: 600 pounds. WARRANTY: 3-year transferable warranty.

Pride Silverstar Solid Ramp

The Pride SilverStar Solid Ramp is a ramp designed for use by individuals with mobility disabilities. This lightweight aluminum ramp has built-in traction control and side rails for safety, and is slotted for moisture drainage. It comes with securement components for mounting. DIMENSIONS (LxW): 1.5, 2, 3, 4, or 5 feet x 30 inches. CAPACITY: 600 pounds. WARRANTY: 3 year transferable warranty.

Pro1 Upper Body Exerciser (Models Pro100-Int & Pro102-Int)

The PRO1 Upper Body Exerciser, models PRO100-INT and PRO102-INT, is an exercise machine and arm exerciser designed for use in cardio- and cardiopulmonary rehabilitation, adaptive physical education programs, and wellness programs for seniors and people who use a wheelchair, including individuals with lower extremity or mobility disabilities or spinal cord injury. This versatile, highly adjustable upper body exerciser can be used seated or standing. It comes with a wheelchair platform and is ava

Pro1000 Upper Body Exerciser (Model Pro1031-Int)

The PRO1000 Upper Body Exerciser, model PRO1031-INT, is a progressive resistance arm exerciser designed for use by seniors or people who use a wheelchair, including individuals with lower extremity or mobility disabilities or spinal cord injury. It can be used in active aging facilities, adaptive physical education programs, and cardio- and cardiopulmonary rehabilitation. This unit has an adjustable, bi-directional arm cranks for use in isokinetic resistance training . It has low starting resis

Prolift Scl

The Prolift SCL (Standard Commercial Lift) is a fully-enclosed commercial elevator designed for use by individuals with walking or mobility disabilities or spinal cord injuries. This heavy-duty elevator can serve up to five floors and features a roped hydraulic drive system, variable speed valve, and a submersible pump and motor. This elevator is equipped with a stainless steel control panel with tactile markings and metal buttons with illuminated halos. Other standard features include four inc

Prolift Voyager

The Prolift Voyager is a commercial or home elevator designed for use by individuals with walking or mobility disabilities or spinal cord injuries. This heavy-duty elevator can be customized in a large variety of colors, sizes, finishes and other options to match its surroundings. It can serve up to five floors, and has a features a roped hydraulic drive system, variable speed valve, and a submersible pump and motor. It is equipped with a stainless steel control panel with tactile markings and m

Pvi Bariatric Multifold Ramp (Models Bar536, Bar636, Bar736, & Bar836)

The PVI Bariatric Multifold Ramp, models BAR536, BAR636, BAR736, and BAR836, is a portable ramp designed for use by individuals with mobility disabilities. This ramp separates into two pieces that fold on a center joint hinge. A closure strap locks the ramp panels together, allowing it to be carried like a suitcase. The ramp has an anti-slip high traction surface and durable welded construction. It accomodates wheelchairs and scooters with various wheel configurations. A safety guide indicates i

Pvi Bariatric Panel Ramp (Models Bpr348, Bpr448, Bpr548, & Bpr648)

The PVI Bariatric Panel Ramp, models BPR348, BPR448, BPR548, and BPR648, is a modular ramp designed for use by individuals with mobility disabilities. It has three interlocking lightweight ramp sections, and additional panels (not included) can be used to increase the width of the ramp. The welded ramp has an anti-slip high traction surface, and outside panels have curbing. It accomodates wheelchairs and scooters with various wheel configurations. A safety DVD and steel security pins are include

Pvi Bariatric Threshold Ramp (Models Bar1636 & Bar2436)

The PVI Bariatric Threshold Ramp, models BAR1636 and BAR2436, is designed for use to make doorways accessible to people with mobility disabilities or spinal cord injuries who use wheelchairs. Made of aluminum, these ramps have an anti-slip, high traction surface, and there are holes punched in the top corners to facilitate installations. Hardware to secure the ramp to a surface is included. DIMENSIONS (LxW) 16 x 36 inches for thresholds 1.5 to 2 inches high (BAR1636); 24 x 36 inches for threshol

Pvi Multifold Ramp With Extended Lip (Models Utw630, Utw730, Utw830, & Utw1030)

The PVI Multifold Ramp With Extended Lip, models UTW630, UTW730, UTW830, and UTW1030 (also known as the PVI Utility Ramp), is a portable van ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This folding ramp has an extended hook so that the top of the ramp clears the rear bumper. It separates into two pieces for folding and transport, and it is carried like a suitcase. The ramp has welded construction with an anti-slip, high traction surfa

Queen's Pride 600 Convertible Bed (Model Qp3948)

The Queen's Pride 600 Convertible Bed, model QP3948, is a motorized bed designed for use by individuals with severe physical disabilities or spinal cord injury. This all-electric bed has a steel pan deck, six-button hand controls, and a high density foam mattress with a nylon cover. POWER: Uses 115 volts. OPTIONS: Heavy-duty side rails (model RA01920); bed-mounted trapeze (model TRQP3948); digital scale (SC600); and emergency battery back-up (model EBU600). DIMENSIONS: 38 x 80 inches, converts t

Queen’S Pride 800Tc

Queen's Pride 800TC is a heavy-duty motorized bed designed for use by individuals with severe physical disabilities or spinal cord injury. The bed has a foam mattress with Ventrex ticking and an eight-button control. It can be set to the Trendelenberg, reverse Trendelenberg, or cardio Chair position, or to a personalized position using independent head and knee catch. The foot section plateaus to reduce edema of the lower extremities. POWER: Uses 115 volts. OPTIONS: Digital scale (model SCTC800)

Queen’S Pride Bed (Model 600Lm)

The Queen's Pride Bed, model 600LM, is a heavy-duty motorized bed designed for use by individuals with severe physical disabilities or spinal cord injury. This all-electric bed has a steel pan deck, a five-button control for all functions, and a high density foam mattress with a nylon cover. POWER: Uses 115 volts. OPTIONS: Heavy-duty side rails (model RA01920); bed- mounted trapeze (model TRQP38/TRQP48); digital scale (model SC600); and emergency battery back-up (model EBU600). DIMENSIONS (LxW):

Quick Ramp Kit

The Quick Ramp System is a ramp kit designed for use by a contractor or an individual to build and install a ramp system to provide access for wheelchairs and scooters. This pre-engineered kit includes aluminum ramp components and support assemblies, stainless steel fasteners, and detailed instructions that provide Americans with Disabilities Act (ADA) guidelines, handrail options, and cut lists for the required lumber.

Quickie M6 Bariatric Wheelchair

The Quickie M6 is a bariatric folding adult wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 26 x 20 inches. The frame is high- strength steel with interchangeable frame components that allow the chair to be adjusted for the rider’s changing needs. This chair is available in 18 different colors. SEAT (LxW): 18 to 22 x 22 to 30 inches. The floor-to-seat height is 17 inches. CASTERS: 5 to 8 x 2 inch front casters. WHEELS: 24-inch rear wheels

Ready Ramp (Models Rr06, Rr07, Rr08, & Rr10)

The Ready Ramp is a folding van ramp designed for use by wheelchair users. This compact portable ramp unfolds to its full size in three steps and has recessed hinges so the ramp surface is free of obstructions. Construction is welded aluminum with a non-skid surface. DIMENSIONS (LxW): 6 feet x 30 inches open, 42 x 15 inches closed (RR06); 7 feet x 30 inches open, 48 x 15 inches closed (model RR07); 8 feet x 30 inches open, 56 x 15 inches closed (model RR08); 10 feet x 30 inches open, 68 x 15 inc

Renaissance Residential Elevator

The Renaissance Residential Elevator is a home elevator designed for use by individuals with walking, mobility or lower extremity disabilities or arthritis and others who use wheelchairs or have difficulty walking up or down stairs. This luxury elevator has an array of interior panel finishing choices to help the user create a custom look. The elevator's soft start and stop enhances overall ride quality and comfort. Fixtures are available in stainless steel, brass or bronze finishes. The Renaiss

Residential Vertical Lift

The Residential Verical Lift is a home elevator designed for use by wheelchair users and individuals with balance, lower extremity, or mobility disabilities. This elevator comes fully assembled and can be used indoors or outdoors. It can be disassembled into three components (the legs, the carrier, and the tower) for installation in a house with narrow doorways. It has an alternating current (AC) motor with a screw drive; keyed, constant pressure controls and emergency stop; weather-resistant sw

Residential Vertical Lift Junior

Residential Vertical Lift Junior is a home elevator designed for use by wheelchair users or individuals with balance, lower extremity, or mobility disabilities or arthritis. It has an expanded metal platform with a tubular platform wall; an alternating current (AC) motor with screw drive; keyed, constant pressure controls; an emergency stop; and top and bottom limit switches. Switches and controls are weather resistant. The elevator comes fully assembled but can be disassembled for inside instal

Rigid Walker (Models 820, 820S & 820T)

The Rigid Walker, models 820, 820S and 820T, is a height adjustable bariatric walker designed for obese individuals with walking, balance, or lower extremity disabilities. This walker has a rigid, non-folding frame with rubber tips. OPTIONS: Long leg kit, replacement tips, and front wheel kit. SIZES: Model 820 is regular (accommodates users 5 feet, 3 inches to 6 feet tall); model 820S is short (accommodates users 4 feet, 4 iches to 5 feet tall); and model 820T is tall (accommodates users 6 feet

Roll-A-Ramp

Roll-A-Ramp is a portable ramp designed to provide wheelchair and scooter access to homes, buildings, or vans. Made of anodized aerospace aluminum, these ramps are available in a two-track style or in a single wider ramp to accommodate scooters and powered wheelchairs and feature built-in side rails for safety. The width is adjustable to accommodate a variety of wheelchairs and scooters. Each lightweight section rolls up or folds for transport and storage and includes a carrying strap/handle. Th

Rubber Threshold Ramp

The Rubber Threshold Ramp is an accessible threshold designed to provide wheelchair or scooter access in entryways. To provide a smooth and secure transition, the ramp is positioned against the door threshold. The rubber can be trimmed to fit the doorway, and ramps can be stacked for higher rises. DIMENSIONS (HxLxW): 1.5 x 14 x 36 inches, 2.5 x 24 x 48 inches, or 4.75 x 48 x 48 inches. CAPACITY: 850 pounds. WEIGHT: 18 pounds (1.5 inch rise), 40 pounds (2.5 inch rise), or 127 pounds (4.75 inch ri

Safespan Telescoping Ramp (Model D-Tr-88)

The Safespan Telescoping Ramp, model D-TR-88, is a pair of telescoping tracks designed to provide access for wheelchair users. Tracks are made using a lightweight aluminum extrusion. The top surface is serrated for positive traction. Each track has one carrying handle. DIMENSIONS (LxW): 88 x 7 7/8 inches. CAPACITY: 550 pounds. WEIGHT: 65 pounds per pair.

Safety Rotational Device (Model 2000)

The Safety Rotational Device, model 2000, is designed to provide rotation for suspended equipment. This product features a solid metal body with smooth acting roller bearings for free rotation. This will prevent you from damaging the equipment or the ceiling hookups. It clips easily to the ceiling bolt with a Safety Snap (see separate entry) which is included. DIMENSIONS: seven inches high. CAPACITY: Working load is 1,000 pounds. GUARANTEE: One full year from shipping date.

Savaria Vertical Platform Lift (Model V-1504)

The Savaria Vertical Platform Lift is an interior or exterior platform lift designed to provide multi-level building access for people with limited mobility. The frame structure is solid steel and offers the same drive unit with four different platform configurations. Its versatile design allows it to be installed inside or outside in both residential or public buildings. This model also features a battery operated emergency system with charger for up and down, and removable panels for easy main

Seca 644 Platform Scale

The Seca 644 Platform Scale is a digital platform scale designed for use to weigh individuals with balance, lower extremity or mobility disabilities. This electronic platform scale has rails on two sides that users can grab when standing on the scale. A chair can also be placed on the scale so a person can be weighed while seated. A memory function calculates the weight of the user by subtracting the weight of the chair from their combined weight. The scale comes with a remote display with LCD f

Seca 656 Electronic Platform Scale

The Seca 656 Electronic Platform Scale is a multifunctional wheelchair and stretcher scale that can be used to weigh individuals, including heavy people, in wheelchairs, chairs and stretchers, including individuals with balance or circulatory disabilities and people who are undergoing dialysis. The wheelchair or stretcher can be weighed separately, and its weight is automatically deducted when it is placed on the scale bearing a person. Other measurements include BMI (body mass index). This elec

Seca 664 Wheelchair Scale

The Seca 664 Wheelchair Scale is a digital wheelchair scale designed to weigh individuals with lower extremity or mobility disabilities or spinal cord injury, including obese people. Access is assisted by the scale's extremely low platform and the self-lowering Seca 470 drive-up ramp. The secure side rails provide additional safety. An integrated pre-TARE function determines in seconds the net weight of a patient in a pre-weighed wheelchair by utilizing internal memory to subtract the weight of

Seca 676 Wheelchair Scale

The Seca 676 Wheelchair Scale is a digital wheelchair scale designed for weighing individuals with lower extremity, mobility, or walking disabilities or spinal cord injury. On the scale's large platform, a person can be weighed while sitting in a wheelchair or on a chair. A sturdy handrail provides support for users who are frail or can walk only with difficulty. The scale's high load capacity allows weighing very heavy individuals. After use, the scale can be folded to save space. The sturdy lo

Seca 984 Bed And Dialysis Scale

The Seca 984 Bed and Dialysis Scale is a digital scale designed for weighing individuals who cannot leave a bed, including people with severe physical disabilities, intensive care patients, and individuals who are undergoing dialysis. The Seca 984 also can be used in burn care units and nursing homes. Using an integrated lift, four load cells can be placed under the castors of the bed. The previously determined weight of the bed is deducted using the scale's pre-TARE function, and the patient's

Semi-Portable Wheelchair Scale (Models Mph07Cr500D & Mph07Cr1000D)

The Semi-Portable Wheelchair Scale is a digital wheelchair scale designed for use by individuals with mobility disabilities or spinal cord injury. This semi-portable wheelchair scale has wheels for transport and integral handles to aid in lifting and lowering it into position. An indicator is recessed in the side of the scale and is readable from above. The indicator is also removable for remote wall or desk mounting. DIMENSIONS: 3.5 x 32.5 x 42.5 inches overall; the platform is 3.5 x 32.5 x 30

Shower / Commode Chair (Models Scc20, Scc22 & Scc26)

The Shower/Commode Chair is a wheelchair commode and shower chair designed for use by obese people with mobility disabilities. FRAME: Non-folding, heavy-duty stainless steel frame. The chair is 45 inches long and 36 inches high; model SCC20 is 28 inches wide, model SCC22 is 30 inches wide, and model SCC26 is 34 inches wide. SEAT: Hinged, padded commode seat with removable pail. Model SCC20 has a 20-inch wide seat, model SCC22 has a 22-inch wide seat, and model SCC26 has a 26-inch wide seat. The

Shrouded Bariatric Straight Back Power Table (Model 84108-30 & 84108-40)

The Shrouded Extra Wide Bariatric Straight Top Power Table, models 84108-30 and 84108-40, is a powered, height-adjustable treatment table designed for use by individuals with lower extremity, and mobility disabilities and obesity. The unit has a welded steel base, top frame, and scissors lift, with a plywood top for support. The lift mechanism is enclosed with ABS plastic. A foot control allows hands-free operation. OPTIONS: Locking casters; set of two safety straps (2 x 92 inches) secured with

Shrouded Extra Wide Bariatric Power Table With Adjustable Backrest (Models 84208-34 & 84208-40)

The Shrouded Extra Wide Bariatric Power Table with Adjustable Backrest, models 84208-34 and 84208-40, is a powered elevating treatment table designed for use by individuals with lower extremity and mobility disabilities and obesity. The table has a dual cylinder, pneumatic backrest that is adjustable from either side and raises up to 80 degrees from a flat position. The unit has a welded steel base, top frame, and scissors lift, with a plywood top for support. The lift mechanism is enclosed with

Single-Point Bariatric Cane (Model 835-700)

The Bariatric Cane model 835-700, is an adjustable offset cane designed for use by obese individuals with balance, lower extremity, or walking disabilities. This aluminum cane is equipped with a rubber tip. DIMENSIONS: Adjusts from 29 to 38 inches tall in one-inch increments. CAPACITY: 700 pounds.

Sit'n Gym & Sit'n Gym Perla

The Sit'n Gym and Perla Sit'n Gym are inflatable balls with 4 to 6 extensions on the bottom that act like legs to stabilize the ball when not in use. The balls are designed as a seating alternative to give better spine alignment and less pressure on the vertebrae. CAPACITY: Will support up to 660 pounds. DIMENSIONS: The Perla series is available in diameters of 45, 55, 65, and 75 centimeters; the standard series comes in 35, 45, 55, and 65 centimeters. COLOR: Standard series colors are associate

Sl600Hd Pinnacle Heavy Duty Stair Lift

The SL600HD Pinnacle Heavy Duty Stair Lift is an interior stair lift designed for use by individuals with balance, mobility, or walking disabilities. This stair lift has a contoured seat with extra-high molded seatback and folding footrest. The track/rail is made of clear anodized aluminum. The lift is powered by a 24-volt direct current (DC) motor. The SL600 can be configured to be controlled by the right or left hand. The seat travels up to 40 feet, rotates up to 90 degrees at the top and bott

Slideout Telescopic Power Ramp (Model Pf5000)

The SLIDEout Telescopic Power Ramp, model PF5000, is a bus ramp designed for use by individuals with mobility disabilities. This ramp provides access to low-floor buses and tucks away when not in use. The ramp is made of stainless steel and aluminum and features a stainless steel enclosure and an electric ball-screw drive system, a solid state PWM electronic controller, proximity switches, current-limiting circuitry to protect the drive system from damage, and manual back-up. Ramp movement stop

Solid Ramp

The Solid Ramp is a portable ramp designed for indoor or outdoor use by individuals with mobility disabilities. This ramp creates a pathway over smaller elevation changes and has a rigid design for a solid feel. The surface has a unique hole pattern for traction and drainage. DIMENSIONS: Available in 3-, 4-, 5-, 6-, and 7-foot lengths. All models are 36 inches wide. CAPACITY: 700 pounds. WEIGHT: The 3-foot model weighs 24 pounds, the 4-foot model weighs 32 pounds, the 5-foot model weighs 40 poun

Solid-Fold Ramp

The Solid-Fold Ramp is a portable ramp designed for indoor or outdoor use by individuals with mobility disabilities. This ramp creates a pathway over larger elevation changes and offers width-wise folding for ease in transportation. The surface has a unique hole pattern for traction and drainage. DIMENSIONS: Available in 7-, 8-, 9-, 10-, and 12-foot lengths. All models are 36 inches wide. CAPACITY: 700 pounds. WEIGHT: The 7-foot model weighs 64 pounds, the 8-foot model weighs 72 pounds, the 9-fo

Solo Xt-550

The Solo XT-550 is a four-wheeled scooter designed for indoor or outdoor use by large individuals with mobility disabilities. FRAME (LxW): 48 x 24 inches (26 inches wide with armrests). Ground clearance is 4 inches with 10-inch rear wheels. This scooter has additional aluminum crossbracing for strength and non-skid front fender footrests. The scooter is available in red or blue and disassembles for transport and storage. RWD: Rear wheel transaxle drive. This scooter is equipped with added specia

Southpaw Custom Support Structure (Model 7000)

The Custom Support Structure, model 7000, is an overhead support frame designed to support suspended equipment when you are not able to install suitable ceiling supports. This is a solid, stable free-standing support structure with three forged eyebolts evenly spaced on the top of beam for use with almost any suspended equipment. The slip fit bolt system is easy to put together and disassemble which makes it convenient for therapists who move frequently. The frame is made of heavy gauge box stee

Space Saver Mat Platform (Models 1420 & 1421)

The Space Saver Mat Platform is a mat table designed for use by individuals with mobility disabilities or spinal cord injury. This wheelchair-accesible table has six legs and the top is padded with high-density urethane foam and upholstered in nylon-reinforced vinyl. All exterior surfaces have a laminate finish. DIMENSIONS (HxLxW): 18 inches x 4 x 7 feet (model 1420) or 18 inches x 5 x 7 feet (model 1421). The foam padding on both models is two inches thick. CAPACITY: 1,000 pounds. COLORS: The l

Stand Alone Threshold Ramp

The Stand Alone Threshold Ramp is an accessible threshold designed to make a doorway or single- step rise accessible to wheelchair or scooter users. The threshold has adjustable legs with a two-inch range, which can be helpful for locations where the surface is uneven, such as decks or turf. The ramp is made of aluminum or painted steel with a non-slip button or expanded metal surface. Safety side curbs are cut level to the top of the threshold allowing a door to open over the ramp. DIMENSIONS (

Stepless Easyfold Pro Ramp (Models 30080-095, 30080-120, 30080-150, 30080-180 & 30080-210)

The Stepless EasyFold Pro Ramp, models 30080-095, 30080-120, 30080-150, 30080-180 and 30080-210, is a portable ramp designed to provide wheelchair or scooter access for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. The ramp can be folded for transport and storage. The ramp is made of anodized aluminum with a skid resistant surface and stainless steel brackets. It also has curbs on both sides to prevent the user from rollin

Stepless Easyfold Pro3 Ramp (Model 30080-165)

The Stepless EasyFold Pro3 Ramp, model 30080-165, is a portable ramp designed to provide wheelchair or scooter access for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. The ramp can be folded lengthwise into thirds for transport and storage. The ramp is made of anodized aluminum with a skid resistant surface and stainless steel brackets. It also has curbs on both sides to prevent the user from rolling off the side of each t

Stepless Easyfold Ramp (Models 30060-090, 30060-120, 30060-150 & 30060-180)

The Stepless EasyFold Ramp, models 30060-090, 30060-120, 30060-150 and 30060-180, is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. This single-fold ramp can be folded and carried with the attached carrying handles or stored. When unfolded, the ramp provides a solid non-skid surface. The ramp can be positioned and removed as needed to overcome minor height differences. Models 30060-1

Stepless Easyfold Telescopic Ramp (Models 30070-180, 30070-210, 30070-240, & 30070-300)

The Stepless EasyFold Telescopic Ramp, models 30070-180, 30070-210, 30070-240 and 30070-300 is a portable ramp and van ramp designed to provide wheelchair or scooter access to structures and vans for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. The length of the ramp is adjustable so it can be used to provide access between two surfaces with a variety of height differences. The telescopic function prevents finger pinching

Stepless Folding Ramp (Models 30020-110, 30020-160, 30020-210, 30020-260, & 30020-310)

The Stepless Folding Ramp, models 30020-110, 30020-160, 30020-210, 30020-260, and 30020-310, is a two-track portable ramp designed to provide wheelchair access for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs. Each track is made of anodized aluminum with a skid resistant surface and stainless steel brackets. It also has curbs on both sides to prevent the user from rolling off the side of each track. This ramp has impact-proof, non-skid

Stepless Lifting Platform (Model Lp6)

The Stepless Lifting Platform, model LP6, is an exterior wheelchair lift designed to lif individuals who use wheelchairs or who have walking disabilities over small height differences. Designed for use in situations in which ramps would be too steep or to long, this unit can be used as permanent or temporary installations. A choice of an electrically or manually operated ramp provides access to the lift and prevents the wheelchair from rolling off while the lift is in use. The electric ramp can

Stepless Lifting Platform (Models Lp12)

The Stepless Lifting Platform, model LP12, is an exterior wheelchair lift designed to lift individuals who use wheelchairs or who have walking disabilities on and off trains. This unit can be transported while folded directly to and used on any railway platform; positioning is accomplished using the built-in clontrol arm. The lifting platform wheels are equipped with a central braking system. Made of weatherproof materials, this unit can be stored under a variety of conditions. POWER: Uses a bu

Stepless Lite Ramp (Models 30100-070, 30100-085, 30100-125, 30100-165 & 30100-205)

The Stepless Lite Ramp, models 30100-070, 30100-085, 30100-125, 30100-165, and 30100-205, is a portable ramp designed for use by individuals with mobility disabilities or spinal cord injury. Made of glass and graphite fiber, the Stepless Lite Ramp is lightweight and folds lengthwise for transport and storage. It has a non-skid surface with a raised edge on each side, and a carry handle on one side for transporting the ramp when folded. It can be used by passengers on public transport, including

Stepless Plain Ramp (Models 30000-050, 30000-105, 30000-130, 30000-155, & 30000-200)

The Stepless Plain Ramp, models 30000-050, 30000-105, 30000-130, 30000-155, and 30000-200, is a two-track portable ramp designed for use to provide wheelchair access for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. Each track is made of anodized aluminum with a skid resistant surface and stainless steel brackets. Each ramp also has curbs on both sides to prevent the user from rolling off the side of the ramp. Both ramp tr

Stepless Telescopic Ramp (Models 30015-100, 30015-150, 30015-200, 30015-250 & 30015-300)

The Stepless Telescopic Ramp, models 30015-100, 30015-150, 30015-200, 30015-250 and 30015-300, is a two-track portable telescoping ramp to accommodate manual and electric wheelchairs for use with steps and curbs and to enter or exit vans. Made of aluminum with a non-skid surface, each track has raise edges on each side and a handle on one side. The edges have soft rubber ends to help hold the track in place. DIMENSIONS: The length of each track extended / collapsed is - 39.125 / 26.5 inches (mod

Stepless Wide Folding Ramp (Models 30040-150, 30040-200, 30040-250, & 30040-300)

The Stepless Wide Folding Ramp, models 30040-150, 30040-200, 30040-250 and 30040-300, is a portable ramp designed for use to provide wheelchair or scooter access for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. This ramp's increased width is intended to provide increased safety for users of scooters and electric wheelchairs and their helpers. The unit can be kept permanently in position or always used in the same place. T

Stepless Wide Plain Ramp (Models 30030-100, 30030-125, 30030-150, 30030-200, & 30030-300)

The Stepless Wide Plain Ramp, models 30030-100, 30030-125, 30030-150, 30030-200, and 30030-300, is a portable ramp designed for use to provide wheelchair or scooter access for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. This ramp's increased width is intended to provide increased safety for users of scooters and electric wheelchairs and their helpers. The unit can be kept permanently in position or always used in the sam

Stimulite Bariatric Cushion

The Stimulite Bariatric Cushion is a foam seat cushion designed to prevent decubitus ulcers/pressure sores in wheelchair users. The cushion is made of a perforated honeycomb material that allows air to circulate and moisture to evaporate, which helps to maintain skin integrity and keep the body at ambient temperature. The cushion has three layers of honeycomb material with a flat bottom. An incontinence pad fits between the cushion's top and bottom layer. The cushion is available with either a p

Superarm Lift 2000

The Superarm Lift 2000 is a steel van lift designed without a platform for use with manual and powered wheelchairs, or scooters (with optional harness attachments). Instead of a platform, the wheelchair and its occupant are raised or lowered by means of a pivoting arm. The lift is designed to work without modification to the vehicle and without obstructing the doorway to other passengers. The wheelchair tips backwards for occupant's head clearance through the van door. Operation toggle switches

Swivel Cushion

The Swivel Cushion is a transfer aid designed for use by individuals with mobility disabilities. Made of foam, this portable disk rests on a .25-inch plywood base and rotates 360 degrees to assist with transfers from chairs and cars. DIMENSIONS: 15 inches in diameter x 1 inch high. CAPACITY: 800 pounds. COLOR: The velour cover is grey.

Swivel Cushion (Model 77142)

The Swivel Cushion, model 77142, is a swivel seat designed for use by individuals with back and hip problems. This lightweight, portable cushion rotates so that the user's back can be kept straight while turning, thereby taking pressure and strain off the back and hips. It consists of a foam cushion on a turntable base of 1/4-inch plywood, with a washable velour cover. CAPACITY: 800 pounds. DIMENSIONS: 15-5/8 inches in diameter. WEIGHT: 4 pounds. COLOR: Velour cover is gray.

T5Xr Recumbent Cross Trainer

The T5XR Recumbent Cross Trainer is an arm and leg exercise machine designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury or arthritis. This exerciser provides total body workout with a smooth and natural stepping motion combined with arm movement. The T5 is self-powered with battery and has a belt drive with generator resistance range of 5-1,400 watts. It has user controlled step length, instant free coasting start and stop action, and a low inertia

Teen / Adult Ball Chair (Model 678)

The Teen/Adult Ball Chair, model 678, is a posture chair designed for office use by individuals with balance disabilities or back problems. This ball-shaped chair is designed to take pressure off the spine, reduce muscle tension, improve balance, and strengthen the torso. Features include an adjustable back rest and a latex free ball that can be inflated to the height of the user. DIMENSIONS: The ball is 22 inches. CAPACITY: 600 pounds. COLOR: Color may vary.

Telescopic Channel Ramp

Telescopic Channel Ramps, models TCR06, TCR08, and TCR10, are portable telescoping tracks designed to provide access for wheelchair users. Each lightweight channel extends to nearly double its length. Channels are made from anodized aluminum with a non-skid ramp surface. Each ramp includes two channels. DIMENSIONS: Track length is 6, 8, or 10 feet when open, and 42, 54, or 70 inches when closed. Track width is 7.5 inches. WEIGHT: 30 pounds (TCR06), 39 pounds (TCR08), or 51 pounds (TCR10). CAPACI

Tenor

The Tenor is a mobile lift designed for use by individuals with mobility disabilities, spinal cord injury, or severe physical disabilities. This mobile bariatric lift has a lightweight aluminium structure with extra room for the larger user, including a four point spreader bar with widely spaced shoulder attachment points. The lift has an extended boom that allows users to be repositioned through 360 degrees if required for access to a bed or chair. The lift includes a range bariatric slings to

Threshold Ramp

The Threshold Ramp is a portable ramp designed for indoor or outdoor use by individuals with mobility disabilities. This heavy-duty ramp creates a pathway over threshold changes. The surface has a grip tape surface for traction. DIMENSIONS: Available in 8-, 10-, 12-, 16-, 24- and 36-inch lengths. All models are 32 inches wide. CAPACITY: 700 pounds. WEIGHT: The 8-inch model weighs 8 pounds, the 10-inch model weighs 10 pounds, the 12-inch model weighs 12 pounds, the 16-inch model weighs 15 pounds,

Titan 600 Lift

The Titan 600 Lift is a pool and hot tub lift designed for use by individuals with spinal cord injury or lower extremity, mobility or severe physical disabilities. This lift is constructed of stainless steel with epoxy powder coating, and it is designed to accommodate heavier individuals. The Titan can be used for in ground and partially raised pools and spas. The Titan 600 can clear walls up to 36 inches high and can be set between 12 and 44 inches from a pool edge. It has a hard seat with a ba

Transit Rider R-5500 Series

Semi-automatic wheelchair lift, electric/hydraulic powered. 31 inch lift travel. Fits in vans with 40 inch doorway width. Overall platform size 32 inches wide by 45 inches long. 47.5 to 61.5 inch maximum entry height via 4 models. 7 second lift time. All steel frame construction. 130 amp maximum load electric motor with hand pump backup. Pendant switch operation by attendant only. CAPACITY: 800 pound maximum lifting capacity.

Tri-Flex Ii

The Tri-Flex II is a motorized bed designed for use by individuals with severe physical disabilities or spinal cord injury. This heavy- duty bed includes a three-piece interchangeable mattress and a sliding surface that expands or contracts for a wider or narrower surface width. Users can get in and out of the bed through the side or through the foot of the bed. Other features include caster wheels, rotating side rails, one button Trendelenberg functions, molded plastic head and foot boards, and

Tub Transfer Bench

The Tub Transfer Bench is a transfer bench designed to enable obese persons with mobility disabilities to transfer safely to and from a bathtub. FRAME: Heavy-duty, height-adjustable, rust-proof stainless steel frame with an anti-tip base and non-skid, non-marring rubber feet. The bench is 42 x 17 inches. The frame allows for a clearance over the tub wall ranging from 15.2 to 20 inches. SEAT: A cushioned, water-resistant bench seat is standard. A commode seat and a padded back with a grab bar are

Tub Transfer Bench With Perineal Cutout (Model Cq-1730L)

Tub Transfer Bench with Perineal Cutout is a bariatric bathtub transfere bench designed for use by individuals with mobility disabilities. This bench has a perineal opening for personal hygiene and fits standard bathtubs at least 22 inches wide at the center. This bench has "Tube in a Tube" construction for added strength. The tubing has vinyl grips to prevent marring the tub. A short back discourages reclining and is removable. The bench is available in a wall to left (model CQ-1730L) or wall

Tuffy Super Extra Wide 397 (Models 397, 397E, 397X, 397Xe, 397Y, 397Ye, 397Z, 397Ze, 397L, & 397Le)

The Tuffy Super Extra Wide 397 is a heavy-duty, folding manual wheelchair designed for use by large adults with lower extremity, mobility or neurological disabilities or spinal cord injury. FRAME (HxLxW): 36 x 44 or 46 x 30, 32, 34, or 38 inches. The folded dimensions (LxW) are 34 x 12 inches. The triple chrome plated steel folding frame has stainless steel side panels and double cross bar construction with reinforcement welds to strengthen the design. Anti-tippers and an anti-folding device are

Two-Seater Tricycle

The Two-Seater Tricycle is an adult tricycle with side-by-side seating for two people designed for use by individuals with balance, neurological, or physical disabilities. This cycle has a frame of 12-gauge welded and reinforced beam with heavy duty axle mounts and ball bearings, and it has two wheels in the rear and one independent smaller front wheel that is used for steering with a single handlebar. This cycle has dual and fully independent, twin 3-speed transmissions that offer independent p

Ultimate Adjustable Toilet Seat

The Ultimate Adjustable Toilet Seat is an adjustable toilet seat designed for use by individuals with mobility or neurological disabilities or obese individuals. Made of hygienic polypropylene, this toilet seat adjusts to individual need, shape, weight, and sitting positions. It attaches to a round or elongated toilet bowl using the standard hinges. The to pieces that form the front of the seat swing outward up to 6 inches to the left and right to accommodate wider bottoms. Grips under the seat

Ultra Twin Freespan

The Ultra Twin Freespan Traverse is a powered overhead bariatric transfer lift designed for use by obese individuals with lower extremity, mobility, neurological, or severe physical disabilities or spinal cord injury. This freestanding rail system is specially designed to lift heavy patients in combination with the Likorall or Multirall (see separate entries)lift motor. This unit is adjustable to four different heights, and is available in eight different rail lengths. Equipped with locking han

Ultratwin Freespan Traverse

The UltraTwin FreeSpan Traverse is an overhead powered bariatric transfer lift designed for use by obese individuals with lower extremity, mobility, or severe physical disabilities or spinal cord injury. This traverse system consists of a movable traverse rail mounted on two fixed rails. The ceiling-mounted traverse system makes the entire area of a room accessible for lifting and transfer. Traverse rails can be connected via switches, enabling, for example, transfers between different rooms. Th

Under-Bed Patient Weighing System (Model Sr193)

The Under-Bed Patient Weighing System, model SR193, is a digital scale accessory designed for use by individuals with mobility disabilities, severe phsyical disabilities, or spinal cord injury. This scale system can be placed under any hospital bed and has simultaneous display of weight and weight change and weight can be dislayed in either pounds or kilograms. A programmable weight alarm function alerts the caregiver if the individual's weight has varied outside preset parameters. The weight al

Uni-Lite

The Uni-Lite is a wheelchair lift for vans designed to ensure smooth, safe entry and exit for wheelchair users. With its compact design and large, non-skid, .25-inch thick aluminum platform, this lightweight conversion loader is adjustable to fit most van doors and is intended to maximize passenger space. Operated by a high-torque electric motor and direct gear drive, it features twin handrails with a control switch, a high-strength, aluminum alloy construction and a built-in manual backup syste

Universal Exercise Bed (Model A)

The Universal Exercise Bed (Model A) is an exercise machine intended for use by people with arthritis or balance or neuromuscular disabilities that prevent them from standing or sitting while exercising. This product features a full size bed with a specially fitted mattress and a metallic frame. At the head of the bed is an arm, chest and shoulders bar with a 120-pound weight stack for upper body strength conditioning. Foot bars are located at the foot of the bed for sit-ups and other abdomina

Universal Exercise Bed (Model B)

The Universal Exercise Bed (Model B) is an exercise machine intended for use by people with arthritis or balance or neuromuscular disabilities that prevent them from standing or sitting while exercising. This product features a full size bed with a specially fitted fixed, 6-piece mattress and a metallic frame. At the head of the bed is an arm, chest and shoulders bar with a 120-pound weight stack for upper body strength conditioning. The sides of the upper half of the bed fold down to allow fo

V4I

The V4i is an overhead transfer lift designed for use with individuals with balance disabilities, brain injury, cognitive disabilities, lower extremity disabilities, mobility disabilities, severe physical disabilities and spinal cord injury. The V4i is a lift system for moving individuals along a high strength track system (not included) that installs into any ceiling. It can move in two or four directions, and it has a steel frame and fire retardent plastic cover. It fits a variety of slings, s

Vagabond

The Vagabond is a stable two-person touring canoe designed for use by individuals with balance or neurological disabilities. This canoe is equipped with two molded removable seats; one seat can be moved to the center of the boat for one-person paddling. The boat is available constructed of fiberglass/nylon, carbon fiber, or Kevlar. This boat includes one set on flotation bags, one convertible paddle,and one set of foot braces. DIMENSIONS (HxLxW): 15 inches x 16.5 feet x 29 inches. The cockpit is

Vangater Ii

The Vangater II is a wheelchair van lift designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This power lift has a tri-folding platform. When the lift is in the stowed position, over half the van's side door is available for ambulatory exit and entry. The lift is electrically powered for both the fold/unfold and up/down cycles. Lift operation is controlled using a hand-held control, on-lift controls, or an optional remote control. It also features

Vertical Platform Lift

The Vertical Platform Lift is a wheelchair lift designed for use by individuals with mobility disabilities or spinal cord injury. This customizable lift provides access to multiple floors with a travel speed of 25 feet per minute. Each lift has a non-slip platform surface, steel construction, an emergency lowering mechanism, a 1.5 horsepower motor, and a keyed call station. The lift is available in four models: standard, tall, plexiglass, and mobile. The Standard Vertical Platform Lift uses a hy

Victory Wheelchair

The Victory Wheelchair is a lightweight manual wheelchair designed for use by children or adults with lower extremity or mobility disabilities or spinal cord injury. FRAME: Folding aluminum alloy frame made with high pressure castings and with no welded joints. Other features include modular design, double 'X' cross brace, ABS plastic side plates, and swing out anti-tips. Options include shopping basket or school tray. SEAT (LxW): 10 x 10, 13.75 x 14, 15.75 x 15, 16.5 x 16, 16.7 x 17, 17.7 x 18,

Welner Enabled Legacy Examination Table

The Welner Enabled Legacy Examination Table is an extra wide, hi-lo, fully electric powered examination table designed for use in clinical settings by individuals with obesity and mobility or physical disabilities. The table can be lowered for wheelchair user access. Standard features include width and weight capacity suited to bariatric patients, side rails and full length accessory rails on both sides of the table, foot calf boot system with pad, powered back and pelvic sections, an anti-stati

Wenzelite Bariatric Anterior Safety Rollers (Models Ce 1000 Xl & Ce Obese Xl)

The Wenzelite Bariatric Anterior Safety Roller is a folding height-adjustable wheeled walker designed for use by large or obese people with mobility disabilities. FRAME: Square steel tubing with welded joints, handlebars, and a powder-coat finish in a choice of colors. BRAKES: The breaking mechanism is activated by applying pressure to the handlebars. An optional Dial-A-Speed knob allows adjustable resistance on one or both rear wheels for greater speed control. WHEELS: Four easy-roll ball bear

Wheelchair Platform Scale (Model Mph07Sw1)

The Wheelchair Platform Scale, model MPH07SW1, is a wheelchair scale designed for use by individuals with mobility disabilities or spinal cord injury. This portable, folding platform scale can be used with bariatric wheelchairs. Weight is measured in graduations of 0.2 pounds. POWER: Uses an alternating current (AC) adapter or rechargeable batteries (both included). OPTIONS: Smartcard station(model MPH07SW1C) to store and subtract the weights of various wheelchairs. (When the Smartcard is slid i

Wingman

WINGMAN is a universally designed toilet seat that has extended platforms (“wings”) on both sides of the seat to provide additional support to those who need assistance lowering and/or raising themselves from the toilet. This device, which can be installed in homes and public restrooms, is universally designed to meet the needs of many individuals, including those with arthritis, muscle or joint pain, people who use wheelchairs, individuals with a temporary disability, those experiencing episodi

Wizz-Ard Large Frame Wheelchair (Models Wz2018, Wz2218 & Wz2418)

The WIZZ-ard Large Frame Wheelchair is a manual wheelchair designed for use by obese adults with mobility disabilities. FRAME (WxDxH): Model WZ2018 is 28.5 x 42 x 36 inches; model WZ2218 is 30.5 x 42 x 36 inches; and, model WZ2418 is 32.5 x 42 x 36 inches. This chair features a black folding stainless steel frame with push handles, a single reinforced crossbrace, 4-point telescoping at each corner to strengthen the design, and a baked urethane finish to ensure chip, scratch, and fade resistance.

Wok750

The WOK750 is a bariatric folding, adjustable, wheeled walker designed for individuals with obesity and walking disabilities. The walker has a heavy-duty steel frame, padded grips, and two front rubber wheels. DIMENSIONS: The height is adjustable from 31 to 39 inches in one-inch increments. The overall width is 30.5 inches. The with between the arms is 27 inches. The overall depth is 24.5 inches. CAPACITY: 750 lb. WEIGHT: 30 pounds. WARRANTY: 60 days on structure, parts, and all other components

Xl 550 Talking Scale

The XL-550 Talking Scale is a voice output digital scale designed for use by individuals who are blind or who have low vision. To use this bathroom scale, tap once, wait for a voice command from the scale, and then step onto the scale. The user's weight is announced in a pleasant voice after a few seconds. Weight is also displayed on the large LCD digital readout. The scale turns off automatically after use, and the voice can be turned off. This scale features an extra-large, stable weighing pla

Parent Category: Universal
 
Processing...


Driving Walking/Biking Public Transit  Get Directions