Transfer Aid

Results: 127

'lawry' Rotary Attachment For Paraplegics

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Rotating transfer device to allow paraplegics to use the toilet then swing away from the toilet on the same seat to use the shower hose. Device made of a U shaped seat held horizontally with the help of an S shaped cantelever system fastened to the floor and using ball and taper bearings to let it rotate. This is used in conjunction with an overhead support which allows paraplegics or lower extremity amputees with upper body strength to toilet and show

Ableware Reversible Toilet Transfer Seat (Rtts)

The Ableware Reversible Toilet Transfer Seat (RTTS) is a toilet transfer aids designed for use by individuals with mobility disabilities. The unit can be used with the armrests up to assist those who have difficulty rising from the toilet, but do not require as much assistance as provided by an elevated toilet seat or grab bars. When used with the armrests turned toward the floor, this device becomes an extra-wide extended platform to assist in wheelchair transfers. This seat bolts to most stan

Adapted Grab Bar For An Armchair.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Grab bar to assist person in standing up from upholstered armchair. Two metal strips attach to side frame of armchair. Two steel pipes form the bar. One attaches vertically to the metal strips. The second, horizontal bar attaches to the vertical one. A specially fabricated joint allows the horizontal bar to pivot or to lock in position, providing a stable hand grip. Measurements determine the optimum distance from chair for vertical bar and the optimum

Agilelife System

The AgileLife System is an automated, no-lift patient transfer and mobility system, helping people who are bedridden transfer in and out of bed safely and quickly. For caregivers, AgileLife automates patient transfer to and from a hospital bed into a wheelchair/commode docked at the foot of the bed. The core product is an integration of several assistive devices that address the challenges of safe patient handling. In both home and institutional settings, the AgileLife System aids in preventing

Armrest To Assist With Standing

CUSTOM ADAPTATION PURPOSE: To enable an individual with arthritis to rise to a standing position from a seat without armrests. This device was designed to be portable for use with a variety of armless chairs and church pews. The frame with a U-shaped base was made of 20 millimeter steel tubing and steel tubing armrests were attached to the base. The front arms or prongs of the base have wide flat strips that provide a stable surface for the user as she pushes on the armrests to stand. A seat an

Assist-A-Tray

The Assist-A-Tray is a transfer aid and a swiveling tray for an armchair or sofa designed for use by individuals with balance or mobility disabilities. The unit features a sturdy, ergonomically designed handle for assistance when getting in or out of a sitting position and a multi-use swivel tray with cup holder and utensil compartment. The unit can be used on the right or left side of a chair or couch and the base slides underneath the furniture. The base has four feet with rubber pads to ensur

Assista-Rail

The Assista-Rail is a transfer aid for beds designed for use by individuals with balance or mobility disabilities. This inverted-U shaped rail slides between mattress and box spring and the required, included safety strap with side-release buckle and anti-slide grips prevents the rail from shifting during use. Made of heavy-gauge steel, the rail is equipped with a non-latex foam grip. DIMENSIONS: The unit extends 24 inches under the mattress and up from the mattress 16 inches. The rail extends a

Aust.rail.ia

---- PROTOTYPE --------- PURPOSE: To assist individuals with balance or mobility disabilities and generalized weakness stand and negotiate environmental barriers with a portable handrail. Aust.rail.ia is a portable all-purpose rail that can be used indoors or outdoors as a handrail, vehicle barrier, general purpose barrier or a “space-restoring” storage or shelving utility area. It can also be used as a sitting/standing aid. This portable rail requires mounting at one end, eliminating the ne

Beasyglyder 32

The BeasyGlyder is a transfer board system designed to assist individuals in transferring between a wheelchair and bed, shower bench, commode, car, chair, etc or between a stretcher and a bed. This device is crescent-shaped to fit around wheelchair arms and wheels. It features an elongated S-shaped groove in the center to serve as a track for a round seat that rotates up to 360 degrees and slides from one end of the track to the other. Because the seat slides with the user, the shear stress and

Beasytrans Easy Transfer System (Ets) & Beasy Ii Easy Transfer System (Ets)

The BeasyTrans ETS and Beasy II ETS are transfer board systems designed to assist individuals with transfer between a wheelchair and a bed, shower bench, commode, car, chair, etc. or a stretcher and a bed. These devices differ from other transfer devices in that they have sliding seats that move from one end of a central elongated S-shaped track to the other. Because the seats slide with the user, the shear stress and friction associated with moving is borne by the system, not the users' skin.

Bed Caddie

The Bed Caddie is a rope ladder designed to assist individuals with mobility disabilities or decreased back strength in pulling themselves to a sitting position in bed. This three-tiered nylon ladder has cushion grip handles and the ergonomic buckle design enables the unit to be attached to most wood or metal bed frames. DIMENSIONS: Grip length is 36 inches; handle grip is 5 inches. Strap length is adjustable up to 45 inches. CAPACITY: 300 pounds. WEIGHT: 2 pounds.

Bed Cane

The Bed Cane is a transfer aid designed for use by individuals with mobility disabilities. This device consists of a large, crook-shaped handle with a cushioned grip and a powdercoated shaft affixed to a wooden base. The base fits between the mattress and box springs to provide stability for the handle which can be used for assistance while entering and exiting the bed, as well as to maintain balance while rising to a standing position or transferring to a wheelchair. The unit can be installed o

Birillo Gait Trainer Walker Size 1

The Birillo Size 1 is a gait trainer / walker specifically designed to give a child with special needs the ability to move freely and safely around the home, school, daycare, and therapy environments.

Body Up Evolution

The Body UP Evolution is a transport chair, caster commode, shower chair and transfer lift sling designed for use by people with balance, lower extremity or mobility disabilities, or spinal cord injury. FRAME (HxLxW): 44 x 35 x 18 inches. This chair has a stainless steel frame with a hinged back so that a person can be loaded from the rear of the frame. The frame separates into two pieces for transport or storage. SEAT: Sling seat that can be raised or lowered. To facilitate loading, the seat ca

Bottoms Up Bar

The Bottoms Up Bar is a transfer aid designed for people with lower extremity and mobility disabilities or spinal cord injury and lower extremity amputees. It allows a person in a wheelchair to transfer to a seated position on the ground or floor and from the floor or ground back into the wheelchair. The Bottoms Up Bar attaches to a wheelchair's frame with two collar clamps that are fastened to the front of the frame. The width of the Bottoms Up Bar is adjustable to accommodate multiple wheelcha

Bottoms Up Bar Adjustable Base Unit

The Bottoms Up Bar Adjustable Base Unit is a transfer aid designed for people with lower extremity and mobility disabilities or spinal cord injury and lower extremity amputees. It allows a person to use the Bottoms Up Bar (see separate record) transfer from a parked wheelchair or a chair, sofa or other sitting furniture to a seated position on the ground or floor and from the floor or ground back into the chair. The four legs of the Bottoms Up Bar are placed into holes in the Base Unit's frame

Car Slide (Model 70406)

The Car Slide, model 70406, is a transfer aid designed for persons who have difficulty getting positioned on a car seat, chairs, or beds. The device consists of a waterproof denim top and a slippery vinyl bottom. Large hand loops are made of 1-inch webbing and located on each side of the rectangular mat. DIMENSIONS: 30 x 35.5 inches. WEIGHT: 1 pound 9 ounces.

Car Slide.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: A fabric slide to be used to help position a person on a car seat. Slide made with about a yard of slippery material (nylon) sewn to a yard of nonslippery material (denim) with strong fabric or webbing sewn in three long ovals to make handles. The nylon side goes against the car seat for ease of sliding. Includes diagram and photograph. SKILLS REQUIRED: Sewing. AUTHOR: Kernaleguen, A TITLE: Clothing Designs for the Handicapped REF: Edmonton, Alberta, C

Care-Give-R-Lift Bed Sled

The Care-Give-R-Lift Bed Sled is a turning aid designed for use with individuals with severe physical or mobility disabilities or spinal cord injury. Designed for repositioning a person in a bed or recliner the device is made of cotton canvas with heavy nylon webbing handles across the width at two locations. A removable bed pad or terry cloth pad can also be placed on the device for comfort. The unit is hand- or machine-washable in warm water and should be air dried. DIMENSIONS(LxW): 40 x 30 in

Care-Give-R-Lift Skid Seat ( Perforated Suede Vinly)

The Care-Give-R-Lift Skid Seat (Perforated Suede Vinyl) is a transfer aid designed for use with individuals with severe physical or mobility disabilities or spinal cord injury. Used for repositioning an individual into a seated position in a wheelchair or other chair with little or no strain on the caregiver, the device is designed for use with a gel cushion and is made of perforated suede vinyl backed with non-slip fabric. Perforations allow air circulation. The suede surface is soft to the to

Care-Give-R-Lift Skid Seat (Canvas) (Models A & B)

The Care-Give-R-Lift Skid Seat (Canvas) is a transfer aid designed for use with individuals with severe physical or mobility disabilities or spinal cord injury. Used for repositioning an individual into a seated position in a wheelchair or other chair with little or no strain on the caregiver, the device is made of cotton canvas. A snap-close tether stap holds the seat on the chair while the individual is being seated. The device can be hand washed and air dried. Model A has full loop handles s

Carex Ultra Grip Pivot Suction Grab Bar

The Carex Ultra Grip Pivot Suction Grab Bar is designed to assist individuals in the tub, shower, and bathroom to prevent slips and falls, and offer support. These grab bars are available in straight lengths and 22 different custom designs. The unique pivoting center design allows for installation in whatever position it is needed and the handy visual indicators on the suction cups ensure you're grabbing onto a solid handle. Handy and easy to use, this suction cup grab bar delivers ideal balance

Cindy Lift

The Cindy Lift is a seat transfer lift aid designed to make lifts more manageable for caregivers and the individual being assisted and to broaden accessible areas for its user. The lightweight aluminium frame allows for quick transfers in a three-step process. This unit adjusts to the user's body and reduces the weight of its occupant for the lifter. The narrow profile fits through doors, halls, and restroom stalls. With this device, the user is able to wear street clothes instead of gowns, and

Contemporary Styled Transfer Bench (Model 77356)

The Contemporary Styled Transfer Bench, model 77356, is a bathtub transfer bench designed for use by individuals with balance, lower extremity, or mobility disabilities. This bench has a contoured seat back with a handle for removal, sturdy legs with non-slip rubber feet, and a split seat with built-in drainage. The split seat allows the user to tuck in the shower curtain to avoid water leaking on the floor. The bench is reversible for shower use. OPTIONS: Shower Holder Attachment (model 77010);

Couch Cane

The Couch Cane is a transfer aid designed for use by individuals with mobility disabilities. This device consists of a crook-shaped handle with a cushioned grip on an adjustable powdercoated shaft resembling a standard cane affixed to a base with non-skid pads. This device can be used at either end of a couch or on either side of a large chair or recliner. The base slides under the furniture for stability and the handle can be used to assist in sitting down or in rising to a standing position.

E-Zee Gait Belt (Models 6524V & 6528V)

The E-Zee Gait Belt, models 6524V and 6528V, is designed to provide a secure grasp for therapists and caregivers during ambulation training and transfers for people with balance, lower extremity, mobility or walking disabilities. This machine-washable cotton belt has Velcro closure for easy application. DIMENSIONS (LxW): 62 x 2 inches. The belt fits 24- to 52-inch waists. COLOR: Model 6524V is white and model 6528V is navy.

Easy Mover Slide

Transfer aid made of unbreakable material and sealed steel bearings on a track. Eliminates need of physical lifting by attendant. Moves 650 pounds up or down a 20 degree incline. Available in 8 by 8 inch, and 8 by 12 inch seats. Overall size 8 inches by 30 inches.

Easy Up Caregiver Lifting Aid

The Easy Up Caregiver Lifting Aid is a transfer aid designed for use with individuals with mobility disabilities or Alzheimer's Disease. This device is a strong, comfortable, wide belt with handles on each end that enable a caregiver to firmly hold on and maintain control while assisting someone with sitting or standing. The belt allows the caregiver to use his/her weight to counterbalance. Reinforced with nylon, the machine-washable belt slips under the arms and around the back of the person b

Easybelt (Models 6012, 6013, 6014, & 6015)

EasyBelt, models 6012, 6013, 6014, and 6015, is a transfer aid and gait belt designed for use with individuals with mobility or walking disabilities. The belt has strong vertical and horizontal handles for gripping support and can be used for sitting transfers or for supporting an individual when standing or walking. Made of moisture- and soiling-resistant nylon. SIZES: Extra small, with 5 handles (6012), small, with 7 handles (6013), medium, with 9 handles (6014), or large, with 11 handles (601

Easyglide (Models 5020, 5050, 5060, & 5070)

The Easyglide, models 5020, 5050, 5060, and 5070, is a transfer board designed for use by individuals with mobility disabilities. Designed to facilitate seated transfers between two surfaces, this hard, slick polypropylene board is also flexible to allow it to be bent over the wheel of a wheelchair. Anti-slip tape on the underside of the board prevents the board from sliding during use. This board also features a hand slot at each end. DIMENSIONS (LxWxH): Model 5020 is 24 x 13 x .2 inches. Model

Easyslide (Model 1030)

The Easyslide, model 1030, is a transfer aid designed to assist caregivers in transferring individuals with mobility disabilities to X-ray, treatment, or operating tables; stretchers; or shower stretchers or to move the individual in bed. This tubular device consists of a protective woven nylon cover coated on one side with polyurethane and a quilted mat with a woven cotton outer shell; a woven, ultra-low friction nylon liner; and flame-retardant trevira padding. To use the slide, the individual

Easyslide (Model 1230)

The Easyslide, model 1230, is a transfer aid designed to assist caregivers in transferring individuals with mobility or severe physical disabilities. It can be used for transfers between beds and x-ray or operating tables, shower trolleys, and cots. It has a soft, padded outer surface for comfort in transferring, with ultra low friction (ULF) material on the inner surface of the sliding mat to reduce friction so individuals can be moved with minimal exertion. OPTIONS: Disposable protective polye

Easyslide (Model 1480)

The Easyslide, model 1480, is a transfer aid designed for use in moving individuals with mobility disabilities. It can be used to aid in transferring between beds and x-ray or operating tables, shower trolleys, or cots. This transfer aid has a soft, padded outer surface for comfortable transfers, with ultra low friction (ULF) material on the inner surface of the sliding mat to reduce friction so individuals can be moved with minimal exertion. OPTIONS: Disposable protective polyethene covers. DIM

Easyslide (Models 2010, 2015, 2020, & 2030)

The Easyslide, models 2010, 2015, 2020, and 2030, is a transfer aid designed to assist caregivers in moving or transferring individuals with mobility disabilities. It can be used in transferring between bed and x-ray or operating tables, shower trolleys, and cots. It has a soft, padded outer surface for comfortable transfers. Models 2010 and 2015 are made of polyester with ultra low friction (ULF) material on the inner surface of the sliding mat to reduce friction so individuals can be moved wit

Ergonomic Walking Belt (Model 6534)

The Ergonomic Walking Belt, model 6534, is a gait belt designed for use with individuals with mobility and balance disabilities. This wide, machine-washable cotton belt features buckle closures, plastic handles on either side, and a cotton handle in the back to provide secure grips for therapists and care givers. SIZES: Small (fits waists 26 to 34 inches), medium (fits waists 33 to 38 inches), large (fits waists 36 to 46 inches), and extra large (fits waists 44 to 52 inches).

ERGOtrans Safe Transfer Harness

ERGOtrans Safe Transfer Harness is designed for use with individuals with limited mobility as a result of generalized weakness, stroke, cerebral palsy and Parkinson’s disease.  The Safe Transfer Harness simplifies the safe transfer of individuals between wheelchairs, beds, and automobile.   ERGOtrans can be used for one, two or three person transfers, and helps eliminate dislocated arms, broken ribs, and drops that are endemic to wheelchair transfers. ERGOtrans works great with slide boards and

Extra Wide Perineal Cutout Tub Transfer Bench (Models Cq-1730Xdl & Cq-1730Xdr)

The Extra Wide Perineal Cutout Tub Transfer Bench is a bariatric bathtub transfer bench designed for use by individuals with mobility disabilities. This extra-wide bench has a perineal opening for personal hygiene and fits standard bathtubs at least 22 inches wide at the center. This bench features vinyl grips on the tubing to prevent marring the tub; a removable short back that discourages reclining; and, "Tube in a Tube" construction for added strength. The bench is available in a wall to left

Ez Pull Sheet

The EZ Pull Sheet is a transfer aid designed for use in positioning and turning individuals with mobility disabilities in bed. This transfer aid is constructed of a layer of soft cotton/poly material on top, and a layer of nylon on the bottom. The tight weave of the top layer is such that the sheet has intrinsic liquid barrier characteristics so it offers incontinence protection. The EZ Pull Sheet has double-stitched seams and five integrated handles. It can be machine washed and dried and is w

Firefly Upsee

The Firefly Upsee is an upright walking device for children with neuromuscular disorders or motor impairments, such as cerebral palsy. The three part kit, allows a child to be attached to their parent, while in a stable, vertical position. The child's feet are also positioned parallel to his or her parent, allowing for smooth movement while walking. The Upsee is suggested for children ages 1 to 8 years of age.

Flexibelt (Models 6023, 6024, 6025, & 6026)

Flexibelt, models 6023, 6024, 6025, and 6026, is a transfer aid and gait belt designed for use with individuals with mobility or walking disabilities. The belt is used for sitting transfers or for supporting an individual when standing or walking. The belt has a polyester surface for comfort against the body, with strong vertical and horizontal handles for gripping support. SIZES: Small with 7 handles (6023), medium with 9 handles (6024), large with 11 handles (6025), or extra large with 13 hand

Flexigrip (Model 6090)

FlexiGrip, model 6090, is a bed transfer aid designed for use by individuals with mobility disabilities. This eight-handle transfer aid can be used when getting out of bed or when making transfers. It is made from soft nylon that resists soiling, and can be fitted at the foot end of the bed using a loop. DIMENSIONS (LxW): 175 x 9 centimeters.

Fleximove (Models 3012, 3020, & 3030)

The Fleximove, models 3012, 3020, and 3030, is a transfer aid designed for turning, positioning, or transferring an individual with mobility disabilities. This unit can be used for moving patients further up in bed or to and from a wheelchair. 3012 has an inner surface made of moisture-resistant nylon for environments with special hygiene requirements, while 3020 and 3030 have a softer, more comfortable velvet surface. DIMENSIONS (LxW): 60 x 20 centimeters (3012, 3030) or 50 x 20 centimeters (30

Fleximove (Models 4011, 4012, & 4016)

The Fleximove, models 4011, 4012, and 4016, is a transfer aid designed for turning, positioning or transferring an individual with mobility disabilities. A padded board with handles and an inner surface of polyester, the unit can be used for moving patients further up in bed, turning over, sideways transfers, or when a patient must be lifted from the floor after falling. Models 4011 and 4012 consist of four handles; model 4016 consists of six handles. DIMENSIONS (LxW): 102 x 43 centimeters (4011

Freedom Safety Booster (Models 75579 & 75582)

The Freedom Safety Booster is a transfer aid designed to aid in positioniing in bed individuals with lower extremity or severe physical disabilities or spinal cord injury. This device is a flat tube of fabric with a slippery interior surface. The person to be turned is positioned on top of the tuble. The caregivers grasp the reinforced edges of the top layer and pull the device toward the headboard to move the individual up in the bed. The unit is machine washable and disinfectant safe. It shou

Freedom Turner (Model 75638)

The Freedom Turner is a transfer aid designed to aid in turning or transferring individuals with lower extremity or severe physical disabilities or spinal cord injury. This device is a flat tube of fabric with a slippery interior surface. The person to be turned is positioned on top of the tuble. The caregivers grasp the reinforced edges of the top layer and pulls the device toward themselves. Once the Turner is in place, it can also be used by one caregiver to turn a side-lying individual on to

Friendly Bed System (Model Eb)

The Friendly Bed System, model EB, is a bed mobility, transfer and positioning aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. The system has a steel framework that fits king, queen or double conventional beds. The frame has two end pieces that are placed beyond a bed’s headboard and footboard (or end if the bed does not have a footboa

Friendly Bed System (Model Fb)

The Friendly Bed System, model FB, is a bed mobility, transfer and positioning aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. The system has a steel framework that fits queen, double, and twin conventional beds. The frame has two end pieces that are placed beyond a bed’s headboard and footboard (or end if the bed does not have a footb

Friendly Bed System (Model Tb)

The Friendly Bed System, model TB, is a bed mobility, transfer and positioning aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. The system has a steel framework that fits twin conventional beds. The frame has two end pieces that are placed beyond a bed’s headboard and footboard (or end if the bed does not have a footboard). The ends ar

Friendly Bed System (Model Tb/hw)

The Friendly Bed System, model TB/HW, is a bed mobility, transfer and positioning aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. The system has a steel framework that fits twin beds with a Hollywood style frame. The system’s frame has two end pieces that are placed beyond the head and foot of the bed. The ends are connected by two pa

Gait Training Belt

The Gait Training Belt is a gait belt designed to provide a secure grasp for therapists and caregivers during ambulation training and transfers. This cushioned belt features two nylon web handles for secure grip and hook-and loop closure. SIZES: Small (fits waists 30 to 34 inches), medium (fits waists 34 to 40 inches), or large (fits waists 36 to 46 inches). DIMENSIONS: The belt is three inches wide and the hook material for closure is 14 inches long.

Gimme A Lift

Gimme a Lift is a transfer aid designed for use by individuals with balance or lower extremity disabilities who are able to bear weight or are ambulatory. Designed for use in home, work, or institutional health care settings, this device can be used unattended by the individual or with the assistance of a care giver. The unit lifts and lowers individuals to stand up, sit down, sit up, or lie down. It supports walking and transfers to walkers, chairs, and wheelchairs. In the assisted mode, a nurs

Grip-N-Assist Professional

Grip-n-Assist Professional is a transfer aid designed for use with individuals with mobility, walking or standing disabilities. The belt is used for sitting transfers or for supporting an individual when standing or walking. It designed for heavy use in domestic, institutional and professional settings. The belt can be worn by the person with a disability and held by the caregiver or worn the caregiver with the person with a disability holding the handle. The belt is secured by an adjustable str

Grip-N-Assist Standard

Grip-n-Assist Standard is a transfer aid designed for use with individuals with mobility, walking or standing disabilities. The belt is used for sitting transfers or for supporting an individual when standing or walking. It is intended for light and moderate domestic use. The belt can be worn by the person with a disability and held by the caregiver or worn the caregiver with the person with a disability holding the handle. The belt is secured by an adjustable strap that fastens with a Velcro st

Handi-Lift Walk Belt (Model 516Xm, 516M, 517M, 518M & 518Xm

The Handi-Lift Walk Belt, models 516XM, 516M, 517M, 518M, and 518XM, is a standing transfer aid designed for use to aid transfers by individuals with balance, lower extremity, mobility, or walking disabilities. The belt is secured with a double Velcro closure, and its Miracle Grip inner lining grips the patient's clothing. The belt has four large padded vertical handles. It is normally used by two caregivers working together, but if necessary, one caregiver with training can use the belt with a

Handler, The

The Handler is a transfer aid designed for use with individuals with mobility disabilities during transfers to the commode, bed, or wheelchair.. The device is a strong polyurethane plastic sling that conforms to the individual's body and features two sets of handhold holes for appropriate hand placement during lifting. DIMENSIONS: 21.5 x 8.5 inches.

Handybar

The HandyBar is a car transfer aid designed for use by individuals with arthritis, balance, or mobility disabilities. Made of forged steel with an ergonomic foam-cushioned handle, this device fits in the U-shaped door striker of most cars to create a handle for extra leverege to aide in getting out of a car. The device can also be used to break automobile windows or cut seat belts in the event of an emergency. CAPACITY: 350 pounds.

Healthsmart Suction Cup Grab With Bactix

The HEALTHSMART Suction Cup Grab Bar with BactiX is designed for use by individuals with balance, mobility, or lower extremity disabilities. It offers short-term balance assistance and will suction onto any non-porous surface, such as a shower wall. Grab bars are used as a temporary of additional support when entering or exiting the shower or tub. The HEALTHSMART Suction Cup Grab Bar is infused with BactiX™ antimicrobial protection. BactiX acts as a shield against germs, odors, stains, molds,

In-Bed Patient Positioning System (Model 55036)

The In-Bed Patient Positioning System is a transfer aid designed to aid in positioning and turning individuals who spend extended periods in bed. The system includes a positioning pad with handles and two wedges that support the individual in the desired position. The pad features three layers: a poly-cotton top layer to wick away urine and other moisture, an absorbent foam center layer, and a liquid-proof vinyl barrier to protect the bed. The vinyl-covered bolsters support the side-lying indivi

Invacare Knee Walker 65960

The Invacare Knee Walker offers a cushioned substitution for crutches. This walker features an easy-to-operate ergonomic hand brake, soft knee pad, and easy folding for storage or transport. It provides maneuverability with the 5 inch front swivel wheels and height adjustability for a custom fit. A basket is also standard for this model.

Ix Transfer System

---- PROTOTYPE --------- PURPOSE: To design a prototype of a short distance transfer system for use by individuals with lower extremity and mobility disabilities, people with spinal cord injury and others who use wheelchairs, aided by a caregiver. The IX Transfer System is a transfer aid and transport wheelchair intended for short distance transfers that can be physically demanding on caregivers. It is designed to be used in communal spaces such as a hospital, skilled nursing centers or similar

Jenx Bee Chair

Styled specifically to appeal to very young children and their families, and developed in conjunction with therapists and care-givers, the Bee seating system by Jenx is a playful and gentle introduction to supported seating. Providing a high level of versatility through a comprehensive range of fixed and height adjustable bases, along with a wide variety of head, trunk, leg and foot support options mean each Bee can be exactly tailored to the needs of any individual child. Adjustable back angle

Jenx Monkey Prone Stander

Specifically designed to appeal to young children and their families, the Jenx Monkey is a fun and gentle introduction to standing. Offering smooth and easy angle adjustment, even with the child in the product, the Monkey can go from upright at 90 degrees, down to 20 degrees prone – providing a way to gradually build tolerance to standing as part of a therapy program. The capacity for outstanding thoracic and pelvic support coupled with flexible leg positioning make the Monkey prone stander an o

Jenx Supine Stander

Supine Stander is a robust standing support that offers children comfort and safety while standing. Children are supported at the back, leaving their hands free to access items on a tray or table in front of them.

Knee Support For Orbital Transfer Platform

The Knee Support for Orbital Transform Platform is a knee cushion for a standing transfer aid designed for use by individuals with balance, lower extremity and mobility disabilities. Designed to be used with the Orbital Transfer Platform (see separate listing), this cushion is made of polyurethane and clamps onto the rear back rails of the transfer platform. DIMENSIONS: 350 x 160 millimeters.

Lady Shifting

---- PROTOTYPE --------- PURPOSE: To design a prototype of a transfer device to be used by caregivers in transferring a person from a wheelchair to a bed. The Lady Shifting is a transfer aid that allows caregivers to transfer the person for their chair to the bed and vice versa. TITLE: The Assisted Move. WEBSITE: Yanko Design. REF: http://www.yankodesign.com/2013/05/15/the-assisted-move.

Leg Lifter (Model Da-5150)

The Leg Lifter, model DA-5150, is a transfer aid designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This device has a wrist loop at one end and a larger loop for the foot at the other. It extends the user's reach to assist in lifting legs onto or off a wheelchair or bed. DIMENSIONS: 41 inches long. WEIGHT: 87 grams.

Leg Loop Leg Lift

The Leg Loop Leg Lift is a transfer aid designed for use by individuals with lower extremity or mobility disabilities. Constructed of nylon webbing, this device has a foot support that stays open until the Leg Lift strap is pulled. The foot loop support conforms to the shape of the foot for a secure, comfortable grip during transfer onto a wheelchair, footrest, bed, or into an automobile. DIMENSIONS: The leg lifter is 41 inches long and the webbing is one inch wide.

Leg Wrap Positioning Aid

The Leg Wrap Position Aid is designed for individuals with motor or sensory impairments such as hemiplegia, paraplegia, hemiparesis and paraparesis who have limited or no use of their leg(s). The Leg Wrap attaches to the user in three places to assist in repositioning the leg and transferring to/from a bed, chair, sofa, wheelchair, toilet seat, etc. Upper and lower handles allow for more controlled movement and reduce bruising and injury caused by grabbing and dropping the legs. Handles also el

Liftvest

The LiftVest is a transfer aid designed for use with individuals with balance and mobility disabilities. This vest-style garment features an attached webbing harness that provides a dozen different hand holds for caregivers to use during assisted transfers. Designed to distribute pressure over the whole torso, this garment eliminates pressure points, and the harness features eight different adjustments to comfortably fit all male and female body types. Because the vest is designed to be an attra

Lovehandles (Models Lh-18, Lh-16, Lh-14 & Lh-20)

LoveHandles is a transfer aid designed for use with individuals with mobility, lower extremity, neurological, or severe physical disabilities or spinal cord injury. This device costists of a carbon frame with a seat and back support. Armrest-style tubular handles on each side and non-slip grips at each top corner of the backrest enable the individual in the device to be transferred by others to and from a pool, wheelchair, boat, automobile, airplane seat, up and down stairs, etc. The device come

Ministretcher (Model 4017)

The Ministretcher, model 4017, is a transfer aid designed for use in transfers of individuals with mobility disabilities in a lying position, mainly to and from an ambulance stretcher, a floor, or on stairs and in other cramped spaces. The unit has padding on each side of a flexible plastic board, which adapts to the shapes of ambulance stretchers, so the transfer aid can remain under patients for the entire journey. The plastic board also gives neck support under the head for safe lifting. DIME

Movemaster Patient Mover

The MoverMaster Patient Mover is a transfer aid designed for use by individuals with mobility, lower extremity, or severe physical disabilities or spinal cord injury. This device is manufactured with silver ion antimicrobial built in for the life of the board. It features anti-pinch hand holes, anti-static inhibitors, and an ergonomic design. The unit is made from high-density stress-relieved polyethylene and is x- ray translucent. Model 2018 is a stretcher model and model 2022 is a hospital mod

Multichair 3000Tx

The MultiCHAIR 3000tx is a combined toilet chair, shower chair, and bathtub transfer bench designed for use by individuals with lower extremity or mobility disabilities. It has a nylon cloth back; an adjustable height raised toilet seat; a seamless padded self-skinning urethane seat cushion; two swing-away locking side arms; a swing-away transfer cushion kit; a drop rail on one side; suction cups for attaching legs to the bath or shower floor or for attaching the unit to the vertical face of the

Multimover

The Multimover is a transfer aid designed for use with individuals with mobility disabilities. The device is a nylon tibe which is placed under an individual aid in positioning in bed. The double-layer design enables the top layer to slide over the bottom layer, repositioning the individual. The unit folds for carrying and includes instructions. DIMENSIONS: 47 x 28 inches.

Orbital Transfer Platform With Knee Support (Model 805)

The Orbital Transfer Platform with Knee Support, model 805, is a standing transfer aid designed for use by caregivers to assist individuals with balance, lower extremity, mobility and walking disabilities. Made with tensile steel, this device is designed to help transfer patients who can stand with support from one seated position to another. The person to be transferred stands on the platform at the base and holds on to the handles while facing the caregiver, then the caregiver tips the platfor

Outta Bed

Outta Bed is a bed mobility aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. This device can be positioned for right- or left-side use and mounts primarily to the bed frame of a standard home flat bed as well as to the floor and wall for added stability. This device can be used to assist in transfers to and from bed and to and from a wa

Parsons Slide Buddy (Model 14A089)

The Parsons Slide Buddy, model 14A089, is a dual-purpose transfer aid designed for use in positioning and transferring individuals with mobility disabilities. The waterproof nylon slide side has a non-slip base that aids a caregiver in positioning the person when entering or exiting an automobile. The reverse side features slippery nylon and six hand holds to aid in transferring from a bed or sofa. DIMENSIONS: (LxW): 30 x 35 inches.

Patient Transfer Belt

The Patient Transfer Belt is a gait belt designed to provide a secure grasp for therapists and caregivers during ambulation training and transfers. This machine-washable belt consists of double-stitched nylon and Sherpa lined for added comfort. Other features include a plastic side release buckle and four grip point handles for security and to aid the care giver in using his/her legs and body weight during transfers. SIZES: Small/medium (fits waists 24 to 42 inches) or large (fits waists 33 to 5

Portable Overhead Bar

DO IT YOURSELF ENTRY --- PURPOSE: To provide a portable, lightweight device enabling a person with limited upper body strength to change position in bed. The device was built from the strong but lightweight expandable tubing used in clothes closets. Quick release pins allow a vertical range from 3 to 4 feet and width range from 3 to 5 feet. The foldable legs are made of Lexan plastic. A canvas strap is pulled tight across the underside of the bed to make the whole unit stable. For travel, every

Posey Transfer Belt (Models 6537, 6537Dx, 6537Q & 6537Qdx)

The Posey Transfer Belt, models 6537, 6537DX, 6537Q and 6537QDX, is a transfer aid designed for use with individuals with balance, lower extremity, mobility or walking disabilities. This machine washable, extra-wide soft nylon belt features sewn-on handles that provide multiple vertical and horizontal grasping points. The Standard version of this belt (model 6537) has six grips and fits waist sizes 28-52 inches; and the Deluxe version (6537DX) has seven grips and fits waist sizes 30-66 inches. B

Positioning Slide

The Positioning Slide is a tranfer aid designed to enable a single caregiver to independently move an individual from one side of a bed to the other. This lightweight, smooth, flexible slide is stain resistant and cleans with disinfectant. This latex-free slide features a self-adhesive hook for hanging. DIMENSIONS (LxW): 33 x 22 inches. WEIGHT: 7.8 ounces.

Push-Up Frame

The Push-up frame is a transfer aid designed to assist individuals with mobility disabilities in rising from or lowering to a seated position. This metal frame slides under the user and has angled handles with foam padding to assist the user. The frame is collapsible for travel and storage. DIMENSIONS (DxWxH): 11 x 22.5 x 8 inches. WEIGHT: 3 pounds.

Quick-Release Gait Belt (Models 6524Q, 6528Q, & 6531Q)

The Quick-Release Gait Belt is designed to provide a secure grasp for therapists and caregivers during ambulation training and transfers. This machine-washable cotton belt is available in standard and extra-long styles and features a quick-release buckle. DIMENSIONS: The standard belt fits 24- to 52-inch waists and the extra-long belt fits 53- to 70-inch waists. COLOR: Model 6524Q is white, model 6528Q is navy, and model 6531Q is pastel bouquet (stripe).

Racing Wheelchair Stabilizer

DO IT YOURSELF ENTRY --- PURPOSE: To facilitate transferring a child to a racing wheelchair. The unit has a plywood base with a pipe frame at the front to hold the front wheel; the front wheel is further secured with a Velcro strap. This stabilizes the racing wheelchair for ease of transfers in and out with one person assisting. The half-inch thick plywood base is made to the size of the wheelchair, and excess material is removed to create a lighter weight base. The pipe frame consists of one-in

Return 7500

ReTurn 7500 is a manual transfer aid designed for use by individuals with mobility disabilities. This unit can be used to transfer individuals to or from beds, wheelchairs, or toilets. It rolls easily and can support a heavy user. OPTIONS: ReTurn Belt support belt.

Rifton Dynamic Stander

The Rifton Dynamic Stander is a mobile prone stander that provides independence and standing mobility for individuals who use wheelchairs. Additionally, the mobile stander helps strengthen one's motor skills so a user can progress toward independent standing.

Rifton Pacer Gait Trainers

Designed for a wide range of individuals with varying abilities, the Rifton Pacer gait trainers are created to be durable and flexible.

Roll Aid Transfer Device.

Light weight transfer board to assist in moving person from one level surface to another, can be used for up to 3 inch uneven heights. Four aluminum rollers on frame with steel ball bearings, vinyl roller cover. Attendant can slide person over rollers to complete transfer without lifting the person.

Safetysure Transfer Belt

The SafetySure Transfer Belt is a manual transfer aid, gait belt, or walker belt for people with balance, lower extremity, mobility or walking disabilities. This belt has numerous hand grips to assist in transfers and gait training. It can also provide equestrian sidewalkers with a variety of leverage points. The anti-slip interior prevents the belt from moving. The easy-to-fasten "fix lock" buckle allows the belt to be tightened without having to open it. SIZES: Small (fits waists 23 to 36 inch

Safetysure Transfer Belt With Sherpa Lining

The SafetySure Transfer Belt with Sherpa Lining is a manual transfer aid, gait belt, or walker belt for people with balance, lower extremity, mobility or walking disabilities. Numerous hand grips provide a variety of leverage points to aid caregivers with transfers, therapists with gait training, or sidewalkers in therapeutic riding programs. The soft synthetic sheepskin lining provides extra comfort and protection for individuals with sensitive skin. An easy-to-fasten "fix lock" buckle allows t

Sammons Preston Transfer Disc

The Sammons Preston Transfer Disc is a transfer aid designed for use by individuals with mobility disabilities. Designed to assist standing transfers, this portable device comprises a turntable on a base that rotates during transfers. Both the base and the turntable are covered with a non-slip, grooved material for safety. DIMENSIONS: 14 and 15 inches in diameter. CAPACITY: 300 pounds.

Sara Stedy

The Sara Stedy is a transfer aid or standing designed for use by individuals with balance, lower extremity, mobility or walking disabilities or spinal cord injury. This mechanical device is used to move a person short distances, such as to and from the toilet, or to assist a person to stand. From a sitting position, the user can grasp the crossbar at the top of the frame and pull up to a standing position. To use the Sara Stedy to transfer the user, the caregiver then flips down the seat, and th

Security Pole

The Security Pole is a vertical pole transfer aid designed for use by individuals with balance, mobility, or lower extremity disabilities. This pole can be installed in any room and placed beside a chair, bed, couch, toilet, shower, or tub to assist with standing and sitting and transfers. It can also be moved between rooms if needed. Made of rust-resistant, zinc-plated steel, this floor-to-ceiling pole is tension mounted and is packaged with its own wrench; no other tools are required. The Secu

Security Pole & Curve Grab Bar

The Security Pole and Curve Grab Bar is a vertical pole transfer aid designed for use by individuals with balance, mobility, or lower extremity disabilities. This pole can be installed in any room and placed beside a chair, bed, couch, toilet, shower, or tub to assist with standing and sitting and transfers. It can also be moved between rooms if needed. Made of rust-resistant, zinc-plated steel, this floor-to-ceiling pole is tension mounted and is packaged with its own wrench; no other tools are

Shower Aide Chair

The Shower Aide is a transfer aid designed for use by individuals with balance disabilities when bathing to provide protection from falls and resulting injuries. The chair allows the bather to sit on the seat outside of the tub or shower, fold down the arms and swivel the chair to slide into the tub or shower and lock the seat in position. When the shower is completed, the user lifts the locking lever, swivels the chair back to the outside of the tub/shower, where the unit again locks into posit

Smart-Rail

The Smart-Rail is a transfer aid designed to assist individuals with mobility and balance disabilities in entering and exiting the bed. The steel rail attaches to a steel frame that slips between the mattress and the box springs. Safety straps provide additional support in anchoring the unit to the bed. The unit locks in place at the bedside and lifting it to unlock it allows it to swing out to assist in standing. Models are available for standard and hospital beds. OPTIONS: Leg extenders. DIMEN

Soft Transfer Belt (Models 527S & 527)

The Soft Transfer Belt, models 527S and 527, is a standing transfer aid designed for use by caregivers when aiding transfers by individuals with balance, mobility, lower extremity, or walking disabilities. The soft, fully padded belt is slip resistant. It closes with a buckle at the front and the fastening can be adjusted for size. The belt is recommended for use with women who have a large bust or people whose body shape requires a narrower belt fastening. The belt has four large padded vertica

Southpaw Xl Adult Changing Tables

The Southpaw XL Changing Tables are designed for use by caregivers, therapists or family members who experience the back strain and pain that accompanies lifting and transferring clients. The table is powered by an electric motor that lowers the frame 18 inches from the floor (sloping the feet towards the ground), enabling the client to self transfer or use minimal assistance. The safety rails are then locked in the upright position and the frame is then raised to a maximum 37 inches high. This

Stander Curve Grab Bar

The Curve Grab Bar is a wall grab bar designed for use by individuals with balance, mobility, or lower extremity disabilities or arthritis. This grab bar is made of rust-resistant zinc-plated steel. It has two major components, a vertical, curving ladder-like shape that provides four gripping heights and pivots 180 degrees, and a horizontal grab bar that extends from the bottom of the curved part. The swiveling bar locks in place at 0, 90, and 180 degrees. DIMENSIONS: The total height when insta

Standers Car Swivel Cushion

The Standers Car Swivel Cushion is designed to benefit the elderly and persons with a mild to severe disability or condition which prevents that individual from getting in and/or out of the car safely. This product is intended to reduce pain on the back, hips and knees when exiting and entering a vehicle. Rotates 360 degrees. No tools, batteries or assembly required. Soft, quilted padding. Portable. Due to the hygiene or rehabilitation nature of this product, it is non-returnable.

Stedy

The Stedy is a transfer aid or standing designed for use by individuals with balance, lower extremity, mobility or walking disabilities or spinal cord injury. This mechanical device is used to move a person short distances, such as to and from the toilet, or to assist a person to stand. From a sitting position, the user can grasp the crossbar at the top of the frame and pull up to a standing position. To use the Stedy to transfer the user, the caregiver then flips down the seat, and the user sit

Superpole & Superpole Bariatric

The SuperPole Transfer System is a transfer aid designed to assist individuals with mobility disabilities. Available in standardand bariatric models, this modular system may be used beside the bath, toilet, bed, or chair and offers sturdy support. Made of rigid heavy-gauge steel, the pole features a slip-resistant rubberized foam grip, a low-profile base, and a rubber friction pad on the top and floor anchor plate to prevent twisting during use. The system is available with the pole only, with a

Superpole F.r.s.

SuperPole F.R.S. is a vertical pole transfer aid designed for use by individuals with balance, mobility, or walking disabilities. The unit is a portable steel pole that provides standing and transferring support in institutional (concrete floor) applications. This is a compact alternative to the SuperPole (see entry) floor to ceiling pole system that eliminates the need for ceiling attachment. The SuperPole FRS is placed into the installed floor receptacle and secured into the receptacle by turn

Superpole Traveler

The SuperPole Traveler is a portable transfer aid designed for use by individuals with balance, walking, or mobility disabilities. Central to the system is a floor-to-ceiling vertical steel grab bar, which provides a secure structure that can be installed in minutes between a floor and ceiling. The unit installs by turning the jackscrew at the bottom of the pole. The screw expands the pole to create enough tension between the floor and ceiling to hold the pole secure. Rubber pads on the ceiling

Supertrapeze

The SuperTrapeze is a support bar designed for use with Healthcraft's SuperPole. The add-on allows a user to pull themselves in an upright position out of bed or off a couch. The two offset ladder rungs help to improve arm strength and increase back comfort. The device can be stowed when not in use.

Swivel Cushion

The Swivel Cushion is a car transfer aid designed for use by individuals with arthritis or mobility disabilities. The two-piece, low-profile cushion has a soft top that rotates smoothly on a flat center disk. The nonskid bottom conforms to the shape of the seat and keeps the unit in place. DIMENSIONS: 16 inches in diameter. CAPACITY: 350 pounds.

Swivel Cushion

The Swivel Cushion is a transfer aid designed for use by individuals with mobility disabilities. Made of foam, this portable disk rests on a .25-inch plywood base and rotates 360 degrees to assist with transfers from chairs and cars. DIMENSIONS: 15 inches in diameter x 1 inch high. CAPACITY: 800 pounds. COLOR: The velour cover is grey.

Swivel Cushion (Model Ha-4781)

The Swivel Cushion, model HA-4781, is a transfer aid designed for use by individuals with lower extremity or mobility disabilities or arthritis. This cushion helps the user to turn when getting in or out of a car, wheelchair, or bed. It has a washable soft fleece top cover. DIMENSIONS: 405 millimeters in diameter x 55 millimeters high. WEIGHT: 1.5 kilograms.

Swivel Seat

The Swivel Seat is a transfer aid designed for use by individuals with mobility and lower extremity disabilities. This cushioned disc secures to automobile seats and chairs with the attached strap. DIMENSIONS: 15.5 inches in diameter and 2.75 inches high.

Tlc Turn-And-Lift Pad (Model 557001)

The TLC Turn-and-Lift Pad is a transfer aid designed to assist caregivers in turning and positioning individuals with physical disabilities in bed. This pad has a brushed tricot top layer, a middle layer of absorbent foam, and a bottom layer of urine-proof vinyl. Attached loops aid in turning and positioning. DIMENSIONS: 40 x 40 inches

Toilet Transfer Aid

DO-IT-YOURSELF-ENTRY --- PURPOSE: To provide a means for those with weak muscles a means of independently getting on and off the toilet. Two one-inch eyehooks are attached to the bathroom ceiling about 16 inches apart and 8 inches in front of the toilet. A length of quarter-inch nylon rope is braided through the hooks, then threaded through 5/16-inch holes in two 1.75-inch wooden dowels, each 18 inches long. The top dowel is placed at the user’s shoulder level and the lower one 8 inches below. B

Topsheet (Models 1519 & 1520)

TopSheet, models 1519 and 1520, is a bed turning aid, incontinent pad, and decubitis pad designed for use by individuals with mobility disabilities or incontinence. The top side (model 1520) is made of super-absorbent material, and the underside (model 1519) consists of a polyurethane-coated moisture-repellant membrane. The surface that the patient lies on is soft, brushed polyester. The surface always feels dry to lie on, which helps prevent pressure sores. Strong straps for fastening to a ceil

Transborder

The Transborder is a standing transfer aid designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. The device is a rotating pole that can be used to transfer from one seated position to another (eg., from one wheelchair to another). The user first turns and locks the direction handle, then puts his/her knees and feet in place, grasps the direction handle and stands slighty using arm strength, and then rotates to the selected point. OPT

Transfer Belt

The Transfer Belt is a gait belt designed for use with individuals with mobility disabilities. This belt enables a therapist or caregiver to provide light to moderate assistance during walking, sitting, or transferring. This belt features hook-and-loop closure and two webbing handholds. DIMENSIONS: Models are available to fit 28 to 42 inch waists, 32 to 48 inch waists, and 36 to 54 inch waists.

Transfer Belt (Model Ha-4710)

The Transfer Belt, model HA-4710, is a transfer aid designed for use by individuals with mobility disabilities or spinal cord injury. It is designed to help an assistant lift the user from a bed, chair, or wheelchair, or support the user in short-distance transfers. The belt has four webbed handle grips for safety when transferring. DIMENSIONS (LxW): The belt is 740 x 140 millimeters. Its strap is 740 millimeters long. WEIGHT: 205 grams.

Transfer Belt (Models 655701 & 655702)

The Transfer Belt is a transfer aid designed to assist therapists and caregivers in transferring individuals with mobility disabilities from a chair to a bed or from a bed to a chair. The belt also provides leverage during assisted walking and standing. The belt is made of heavy-duty cotton webbing and a secure metal buckle to close it around the waist. DIMENSIONS (LxW): Model 655701 is 54 x 2 inches long and model 655702 is 72 x 2 inches long.

Transfer Commode Seat.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Adapted transfer seat on a commercially available commode chair with swing away arms. Allows person to transfer more easily between a wheelchair or bed and the commode chair. The standard seat is removed from a commode chair and a wooden seat is made from 3/4 inch plywood. One side of the seat is extended like a transfer board with a slot near the far end to hook onto the wheelchair frame. Includes pictures. SKILLS REQUIRED: Woodworking. AUTHOR: Eileen

Transfer Handle, The (Models 2001, 2025, & 2025H)

The Transfer Handles are transfer aid designed to assist people with mobility disabilities in transferring to and from a bed and to assist with in-bed mobility. Model 2025 features a steel handle attached to a bed board which slides between the mattress and the box springs. Shaped in an inverted U, the handle also has a second, lower bar for added stability in standing and greater in-bed mobility. Model 2025H is similar to model 2025, but is designed specifically for use with hospital-style beds

Transfer Sling

The Transfer Sling is a transfer aid designed to enable a caregiver or therapist to safely assist individuals with mobility disabilities in transferring and standing. This device combines a transfer belt with a sling, providing support around the back and behind the knees. Handles enable the caregiver to lift without strain. SIZES: Small/medium or large. CAPACITY: 250 pounds.

Transfer Sling And Gait Belt

The Transfer Sling and Gait Belt is a combination manual transfer sling and gait belt designed to provide a secure grasp for therapists and caregivers during ambulation training and transfers. This belt-style device provides support under the knees and behind the back, aiding in better body mechanics during one- and two-person assisted transfers. SIZES: Small/medium or medium/large. CAPACITY: 250 pounds.

Transfer Trapeze

The Transfer Trapeze is a powered transfer aid designed to allow the user to transfer from a wheelchair to a couch with the aid of an overhead trapeze. The motorized trapeze is suspended from a wheelchair-mounted frame. The frame consists of steel tubing and 1-inch electrical conduit tubing. The motor consists of a used car window motor, which is mounted underneath the seat of the wheelchair. The user grasps the trapeze and activates the mounted switch, which rotates the device 90 degrees and tr

Transfer Turntable (Model Ha-4770)

The Transfer Turntable, model HA-4770, is a turning and transfer aid designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This strong, lightweight turntable rotates 360 degrees in any direction, enabling a helper to transfer the user safely from chair to bed or car to wheelchair. DIMENSIONS: 405 millimeters in diameter. CAPACITY: 125 kilograms. WEIGHT: 1 kilogram.

Tubbuddy With Tilt (Model Sb2T)

The TubBuddy with Tilt, model SB2T, is a caster shower commode designed for use by individuals with lower extremity, mobility or severe physical disabilities or spinal cord injury. This system allows a caregiver to transfer an individual over the edge of a bathtub for ease in showering or to be rolled over a standard or elongated toilet when used as a commode. For transfer into or out of a shower enclosure, see the ShowerBuddy (see separate entry). The chair can also be used a shower chair for r

Turnsheet (Model 1580)

The Turnsheet, model 1580, is a transfer aid designed to assist individuals with mobility disabilities in turning or changing positions in bed. The Turnsheet consists of two elements: the first element is quilted mat with a woven cotton top layer, a layer of flame-retardant trevira padding, and a bottom layer of ultra-low friction woven nylon. This element is equipped with webbing straps to be attached to the head of the bed frame. The second element is a mattress cover with an ultra-low frictio

Turntable (Model 5085)

The TurnTable, model 5085, is a standing transfer aid designed for use by individuals with mobility disabilities. It is used to enable transfers to and from wheelchairs, beds, and toilets by individuals who have enough strength to stand on their legs but not enough energy to move their feet. It is made of durable polyethylene with a rubber-like anti-slip surface. Two discs are attached in the center with a metal screw, enabling the top disc to rotate and pivot the user to the proper position for

Uneek Bedrail System

The Uneek Bedrail System is a side rail and transfer aid designed to assist individuals with mobility and balance disabilities in entering and exiting the bed. The steel bedrail attaches to a steel frame that slips between the mattress and the box springs. Safety straps provide additional support in anchoring the unit to the bed. This portable bedrail system is available in two models. One opens and closes like a gate, and the other one does not. Both models feature a utility board that can supp

Webbed Transfer Aid

"DO IT YOURSELF" ENTRY --- PURPOSE: To enable individuals to be lifted and transferred from one seat or surface to another in a seated position. To make this device, cut one 72-inch strip of webbing (lengthening may be required for use with a larger person) and then cut eight eight- to nine-inch strips (lengthening may be required for use with a larger person). Assemble straps in a crosshatch pattern. Zig Zag stitch along end of all the straps to avoid fraying. Straight stitch all seams about on

Parent Category: General Transfer Devices
 
Processing...


Driving Walking/Biking Public Transit  Get Directions