Adult Manual Wheelchair

Results: 253

1000 Series

Manual drive wheelchair, folding. Adult sizes, seat widths, 16 or 18 inches. Seat depth, 16 inches. Back height, 16 inches. Arms: fixed or detachable, full length or desk length, fixed height. Arm lock, spring button release. Front rigging, swingaway footrests, swingaway elevating legrests and swingaway, elevating extended length legrests. Chrome plated carbon steel frame and crossbrace. Push handles with vinyl handgrip. Flame retardant vinyl upholstery with reinforced liner. Wheels: 24-inch com

1000E Series

Manual drive wheelchair, folding. Adult sizes, seat widths, 16 or 18 inches. Seat depth, 16 inches. Back height, 16 inches. Two frame types: FF fixed arm, fixed footrest; SA swingaway with permanent arms (08), full length removable arms (18) or desk length removable arms (28). Chrome-plated carbon steel frame and crossbrace. Push handles with vinyl handgrip. Flame retardant vinyl upholstery with reinforced lining. Twenty-four inch spoked wheels, solid rubber tires. Eight inch plastic mag style w

3D printed wheelchair Hand Drive

The Hand Drive wheelchair attachment is a prototype that can be attached to any wheelchair and allows it to be powered in a rowing motion. It is an example of open source product design created by Boston-based Kate Reed, an avid unicyclist and street performer and her partner Nathaniel Tong, a competitive fencer and entrepreneur. The attachment was developed for use with existing wheelchair designs.

4000 Series

Manual drive wheelchair, folding. Adult sizes, seat widths, 16, 18, 20 or 22 inches. Seat depth, 16 inches. Back height, 16 inches. Arms: fixed or detachable, fixed or adjustable height, full length or desk length. Screw attached stainless steel clothing guards. Arm lock, button spring release. Front rigging: swingaway footrests and elevating legrests; and telescopic legrests. Chrome plated carbon steel frames and crossbraces. Push handles with vinyl handgrips. Upholstery: embossed Naugahyde wit

802-DY Ultra Lightweight Wheelchair

The 802-DY Ultra Lightweight Wheelchair is a lightweight adult manual wheelchair designed for use by individuals with mobility or lower extremity disabilities, or spinal cord injury. FRAME (HxW): 37 x (23 or 25) inches. Folding high strength aluminum frame with black powder coat finish. Folded width is 12 inches. Anti-tippers are optional. SEAT (WxD): (16 or 18) x 16 inches. Seat to floor height is 20 inches. Seat back height is 16 inches or 17 inches (18-inch seat width). Options include foldab

A-6 & A-6S

The A-6 and A-6S are lightweight wheelchairs designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: The A-6S comes standard with a rigid suspension and the A-6 is standard without the suspension. The overall width for both models is available from 20.75 to 34.5 inches. A tapered front end or a non-tapered V front end are available at no extra charge. The frame width and depth are available in a range of sizes from 14 x 14 inches to 20 x 20 inches in one-inch inc

A4

The A4 is a lightweight wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Lightweight frame with an overall width of 18.75 to 36.5 inches. Features include a curved back frame and a camber tube clamp assembly that allows adustment of the center-of-gravity in an infinite number of settings. A full suspension is available as an option. SEAT: Available with seat widths of 12 to 22 inches and seat depths of 14 to 22 inches. The rear seat-to-floor hei

Act Wheelchair

The Act Wheelchair is a lightweight adult wheelchair designed for use by individuals with mobilitiy disabilities. FRAME: Rigid titanium frame in a choice of a short or long configuration. The frame is available in a standard choice red, black, olive green, and steel blue smooth finishes and sea green, blue, plum, or grey textured finishes. Anti-tips are optional. Blue chrome and black graphite finishes are optional. SEAT: The height- and angle-adjustable seat is available in a choice of 14, 15,

Activator

Activator is a folding lightweight manual wheelchair designed for use by individuals with mobility disabilities. This chair is designed to be flat-packed for loading into a car. FRAME: Rigid cantilevered titanium tube frame with front locking hinges made of solid titanium.

Aircraft Aluminum Wheelchair

The Aircraft Aluminum Wheelchair is a basketball wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Made of rigid 6000 Series aircraft-grade aluminum and heat treated after welding. Available frame colors are deep green, Porsche red, mother of pearl, lapis blue, teal metallic, chrome yellow, or lime green. Impact guards are optional. Custom modifications are available. SEAT (LxW): 14 to 18 x 13 to 18 inches. The distance from the floor to the sea

Airlite Pro

AirLite Pro is a lightweight manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Total length is 32.25 inches for 75-degree frame and 30 inches for 90-degree frame. The total width is seat width plus 8.75 inches with 3-degree camber. The frame is made of aluminum with carbon fiber camber tube. The aluminum is double-butted (twice as thick) where tubes connect. Options include suspension and Vario-Ax Multi Positional camber tube with 1-, 3-,

All Terrain Chair (Model Atc 100)

The All Terrain Chair, model ATC 100, is a beach wheelchair designed for use by individuals with mobility disabilities. FRAME (LxW): 36 x 31 inches. The white PVC tubular frame disassembles for storage and transport. All hardware is stainless steel. SEAT (WxDxH): 18 x 18 x 24 inches. A seatbelt is included. A fixed backrest is standard; a reclining backrest is optional. CUSHION: An optional cushion set is available. UPHOLSTERY: Mesh sling upholstery. ARMRESTS: Swing-away armrests are standard.

Allegro

The Allegro is a lightweight child or adult wheelchair designed to address a variety of positioning needs for people with mobility disabilities. FRAME: Folding modular crossbrace frame for growth capability in a choice of colors is standard. A rigid frame and a frame without seat rails are available. SEAT: The seat depth and back angle are adjustable to permit the acceptance of a variety of seating systems. An adjustable-height back, upholstered back canes, and fixed-height back canes for posit

Ambulizer (Model Mc-20)

Manual wheelchair, nonfolding. 2.5 inch cushioned solid seat and back cushions covered in Naugahyde, flip up service tray, swing away removable footrests, dual brake levers, upholstered leg support, 24 inch solid rubber rear tires, 6 inch rubber front caster wheels, 66 inch adjustable IV pole, 2 inch wide safety belt. Handrims on rear wheels. Seat width 20 inches, seat depth 17 1/2 inches.

Astaire Plus

The Astaire Plus is a lighweight adult wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Carbon steel frame with double-coated chrome finish and dual axle that allows transition of seat to hemi-level. SEAT: 16-, 18-, 20-, or 22-inch width. UPHOLSTERY: Heavy-gauge flame-retardant black nylon upholstery. ARMRESTS: Removeable arm with padded nylon armrest. Removeable arm comes in a choice of desk- or full-arm styles, a

Atb-Ultimate

The ATB-Ultimate is a rough terrain sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches magnesium alloy powder coat frame. Frogs Legs rear elastic-polymer suspension is standard. The rear axel center of gravity is adjustable. The frame also had an adjustable angle push bar and custom cut aluminum side guards. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 8 to 20 inches i

Baller Elite

The Baller Elite is a sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. Magnesium alloy powder coat frame with 1.375-inch tubing. Aluminum side guards are standard. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest is welded and non-folding. UPHOLSTERY: Laminated carbon fiber sailcloth adjustable by tension cord. CASTERS:

Bariatric Wheelchair (Models W35795, W35795, & W35797)

The Bariatric Wheelchair is an adult manual wheelchair designed for use by obese individuals with mobility disabilities or spinal cord injury. FRAME: Features double square crossbraces with twin struts and reinforced and gusseted 5/8 inch rear axles. SEAT (WxD): The seat is available in 26 x 20 inches (model W35795), 28 x 20 inches (model W35796), or 30 x 20 inches (model W35797). The seat to floor height is 18 inches. UPHOLSTERY: Nylon upholstery with triple Tirtilene seat liner for added supp

Barrett (Models 7 & 10)

The Barrett 7 and 10 models are adult manual wheelchairs designed for people with lower extremity or mobility disabilities or spinal cord injury. They are suitable for indoor and outdoor use and can be folded into a smaller size. The Barrett 7 is designed to be manually propelled by the user while the Barrett 10 can only be propelled from behind by an attendant. A wide range of accessories and upholstery is also available for these hand-built chairs that feature an easy to clean durable chrome f

Barrett Combi (Models 8 & 9)

The Barrett Combi, models 8 & 9, are adult wheelchairs designed to provide the user with the chair best suited to his/her individual needs and comfort. FRAME: 29 x 30 x 12 inches (Combi 8); 29 x 26 x 12 inches (Combi 9) folded sizes; tubular alloy steel, full gloss stove finish. SEAT: 17 x 17 inches for both models. ARMRESTS: Detachable for tray usuage with molded arm pads. BRAKES: Lever assembly. WHEELS: Combi 8 (22 inch); Combi 9 (12.5 inch). CAPACITY: 226 pounds for both models. WEIGHT: C

Barrett Maxi

The Barrett Maxi is a self-propelled adult wheelchair ergonomically suitable for a larger stature user. FRAME: 29.5 x 29 x 12 inch folded size; tubular alloy steel; full gloss stove finish. SEAT: 18 x 16 inches. ARMRESTS: Detachable for tray usuage with molded pads. BRAKES: Lever assembly. WHEELS: 24 inch pneumatic tyre. CAPACITY: 252 pounds. WEIGHT: 41 pounds. Several accessories are also available.

Bcw 600 Wide Wheelchair

The BCW 600 Wide Wheelchair is a folding manual wheelchair designed for use by large adults. FRAME: Stainless steel folding frame with a baked urethane finish to ensure chip, scratch, and fade resistance. A double X-brace and 4 point telescoping at each corner to strengthen design are standard. The chair folds to 13 inches for transport and storage. A rigid frame is available. Black is the standard frame color; red, teal, silver, and charcoal chrome are available at an extra charge. Anti-tippers

Bcw Advantage (Models Bcwad22, Bcwad24, Bcwad26 & Bcwad28)

The BCW Advantage is an adult manual wheelchair designed for obese individuals with mobility disabilities. FRAME (WxDxh): Model BCWAD22 is 29 x 32 x 39 inches; model BCWAD24 is 31 x 32 x 39 inches; model BCWAD26 is 33 x 32 x 39 inches; and, model BCWAD28 is 35 x 32 x 39 inches. The blue heavy-duty stainless-steel frame features push handles, double crossbraces and four-point telescoping for strength and folds to 13 inches. Anti-tips are optional. SEATS: The standard seat is 20 inches deep and 20

Beach Hippocampe

The Beach Hippocampe is a three-wheeled beach and all-terrain wheelchair designed for use by individuals with mobility disabilities. FRAME: The frame is available in small, medium, large, and extra-large. The small frame is 46 inches long, the medium frame is 50 inches long, the large frame is 54 inches long, and the extra-large frame is 62 inches long. Folded dimensions (HxL) are 15 x 45 inches for the small frame, 15 x 49 inches for the medium frame, 15 x 53 inches for the large frame, and 15

Bentley

The Bentley is an adult manual tilt-in-space wheelchair designed for use by individuals with mobility, lower extremity, neurological, or severe physical disabilities or spinal cord injury. This chair can be propelled by hand and/or foot in and out of tilt. FRAME: The overall width with 12- or 16-inch wheels is the seat width plus 9.5 inches; with 20- or 24-inch wheels and hand rims the overall width is the seat width plus 10.5 inches and without hand rims, the width is the seat width plus 9 inch

Bluebird Travel Wheelchair

The Bluebird Travel Chair is lightweight folding transport wheelchair designed for use by adults with lower extremity or mobility disability or spinal cord injury. The innovative folding mechanism allows the wheelchair to fold in on itself, into a remarkably small easy to lift package. The Bluebird stands in its own footprint making it ideal for storage indoors and can also lie flat in the car boot allowing room for luggage. It is made from aluminum and weighs just 10 kilograms (22pounds) witho

Breezy

The Breezy is a manual drive, lightweight wheelchair built for adults. FRAME: Folding frame in a choice of chrome, silver texture, or blue finishes. Push handles are standard and anti-tip tubes are optional. SEAT: A padded seat is standard. A non-padded seat is available at no cost. Standard seats are available in 14-, 16-, or 18-inch widths; the standard seat depth is 16 inches. A 20-inch wide or 18-inch deep seat is available at an extra charge. The seat height depends upon thw wheels and cast

Breezy 2

The Breezy 2 is a manual drive, lightweight wheelchair built for adults. FRAME: Folding frame in a choice of forest green, silver texture, or blue finishes. Anti-tip tubes are optional. SEAT: A padded seat is standard. A non-padded seat is available at no cost. Standard seats are available in 14-, 16-, or 18-inch widths; the standard seat depth is 16 inches. A 20-inch wide or 18-inch deep seat is available at an extra charge. The seat height depends upon the wheels and casters selected. The back

Breezy Basic

The Breezy Basic is a manual drive, lightweight wheelchair built for adults. FRAME: Folding frame in a silver texture finish. Push handles are standard and anti-tip tubes are optional. SEAT: A padded seat is standard. A non-padded seat is available. The seat is available in 16 x 16 inches or 18 x 16 inches. The back height adjusts from 17 to 19 inches. CUSHION: No. UPHOLSTERY: Sling upholstery is standard. ARMRESTS: Flip-back armrests with full- or desk-length pads are standard. Flip-back, heig

Breezy Le

The Breezy LE is a manual drive, lightweight wheelchair built for adults. FRAME: Folding frame in a silver texture finish. Push handles are standard and anti-tip tubes are optional. SEAT: A padded seat is standard. The seat is available in 16 x 16 inches or 18 x 16 inches. The back height is 17 inches. CUSHION: No. UPHOLSTERY: Sling upholstery is standard. ARMRESTS: Flip-back armrests with full- or desk-length pads are standard. Flip-back, height-adjustable armrests are optional. BRAKES: High-

Breezy Ultra 4

The Breezy Ultra 4 is a folding manual adult wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Non-corrosive aluminum frame. SEAT (LxW): 16 to 18 x 16 to 20 inches. The floor-to-seat height is 15.5 to 19.5 inches. UPHOLSTERY: Nylon upholstery. ARMRESTS: Adjustable-height padded armrests. Also available are flip-back arms in either desk or full length. CASTERS: 6 or 8 inch angle-adjustable casters. WHEELS: 20-inch full profile or 24-inch low profi

Broda Tilt Wheelchair (Model 587)

The Broda Tilt Wheelchair, model 587, is a tilt-in-space low seat wheelchair designed for indoor use by individuals with lower extremity, mobility, or balance disabilities. The front pivot seat tilt allows for proper positioning of the foot on the floor for propelling the chair while tilted. FRAME (LxW): 51 x seat width plus 10.5 inches. The frame is 16-gauge tubular powder coated steel. Anti-tippers are included. SEAT (LxW): Standard seats are 17 x 16 inches or 17 x 18 inches. Optional seat dim

Bt

The BT is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. 6061 T6 aluminum powder coat frame with 1.5-inch tubing. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest angle is adjustable from 80 to 100 degrees. UPHOLSTERY: Laminated carbon fiber sailcloth adjustable by tension cord. CASTERS: Frogs Legs Ultra

Bt-Atb

The BT-ATB is a rough terrain sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches 6061 T6 aluminum powder coat frame with 1.5-inch tubing. SEAT (WxD): 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 8 to 20 inches in 1-inch increments. The backrest angle is adjustable from 90 to 100 degrees, and there is a 7075 aluminum CNC water-jet cut backrest plate. UPHOLSTERY: Laminated carbon fiber sail

Bt-Ballistic

The BT-Ballistic is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. 6061 T6 aluminum powder coat frame with 1.5-inch tubing. The frame features custom machined billet down tubes and axel cross bar and a mirror polish finish to echo motorcycle styling. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest angle

Bt-G Tribal

The BT-G Tribal is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. 6061 T6 aluminum powder coat frame with 1.5-inch tubing. The frame features 6061 T6 CNC machined tribal-themed cutouts. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest angle is adjustable from 80 to 100 degrees. UPHOLSTERY: Laminated carbo

Bt-Mg

The BT-Mg is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. Magnesium alloy powder coat frame with 1.375-inch tubing. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest plate is made of 7075 aluminum with a water jet cut. UPHOLSTERY: Laminated carbon fiber sailcloth adjustable by tension cord. CASTERS: 3.25

Bt-Mg-A

The BT-Mg-A is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. Magnesium alloy powder coat frame with 1.375-inch tubing. The center of gravity is adjustable in .5-inch increments. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest plate is made of 7075 aluminum with a water jet cut. UPHOLSTERY: Laminated car

Bt-Mg-As

The BT-Mg-A is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. Magnesium alloy powder coat frame with 1.375-inch tubing. Frogs Legs rear elastic-polymer suspension is standard. The center of gravity is adjustable in .5-inch increments. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest plate is made of 7075

Bt-Trail

The BT-Trail is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. It is intended for outdoor use on unpaved surfaces. To enhance stability, the BT-Trail’s design features a wider distance between the casters, and the casters are positioned forward to be even with the footrest to create a longer wheelbase. FRAME (LxW): 16 x 16 inches. 6061 T6 aluminum powder coat frame with 1.5-inch tubing. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 1

Bt-X

The BT-X is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. It is intended for indoor and outdoor use on a variety of terrains, including unpaved paths and beaches. To facilitate this versatility, the BT-X is designed to fit multiple wheels and casters in addition to those include with the standard model. FRAME: Aluminum alloy frame and forks. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is availa

Carbon Core Wx 2.5

Carbon Core WX 2.5 is a lightweight wheelchair wheel option. It is designed to reduce linear momentum and reduce rotational inertia. The thermoplastic resin and Kevlar/carbon fibers work together to dampen road vibration. The wheelchair spokes are designed to maintain lateral stiffness and firm responsiveness, these composite spokes absorb some of the road "buzz", for greater comfort and control. There is a special thermoplastic carbon fiber composite material for the hub shell. It has strength

Care Chair Classic

Care Chair Classic is a manual wheelchair designed for shopping use by individuals with mobility disabilities. Wire baskets attach to full length armrests of a standard wheelchair, which is supplied with the basket, or to rear of wheelchair, or both front and rear. Wheelchair has standard 24 inch rear wheels with hand rims. 8 inch front casters. Basket is 42 inches long, 24 inches wide and 38 3/4 inches from the floor. Basket capacity is 40 pounds, front or rear or 80 pounds total.

Catalyst 4 And Catalyst 4 Super Low

The Catalyst 4 and Catalyst 4 Super Low are lightweight folding adult manual wheelchairs designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of 6061-T6 aircraft aluminum. It features an offset axle plate that offers rear seat height adjustability, and the axle plate can be reversed for amputees. A heavy duty frame (350 pounds capacity) and rear anti-tips are optional. The frame is available in a varie

Catalyst 4C

The Catalyst 4C is a lightweight folding adult manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of 6061-T6 aircraft aluminum. It features an offset axle plate that offers rear seat height adjustability, and the axle plate can be reversed for amputees. A heavy duty frame (350 pounds capacity) and rear anti-tips are optional. The frame is available in a variety of colors in matte or

Catalyst 4Ttl

The Catalyst 4TTL is a lightweight folding adult manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of 6061-T6 aircraft aluminum. It features an offset axle plate that offers rear seat height adjustability, and the axle plate can be reversed for amputees. A heavy duty frame (350 pounds capacity) and rear anti-tips are optional. The frame is available in a variety of colors in matte

Catalyst 5

The Catalyst 5 is a lightweight folding adult manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of 6061-T6 aircraft aluminum. It is available in two optional versions - Heavy Duty Option and Transit System. A depth adjustable rear frame also is optional that allows for adjustments of 2 inches forward and 3 inches forward. Rear anti-tips are available for all versions. A variety of

Catalyst 5 Ti

The Catalyst 5 Ti is a lightweight folding adult manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of Ti3AL/2.5V alloy. It is available in two optional versions - Heavy Duty Option and Transit System. Aluminum cross braces are standard; titanium cross braces are standard. Rear anti-tips are available for all versions. A variety of colors are available. SEAT (WxD): 14 to 19 x 14 to

Catalyst 5Ttl

The Catalyst 5TTL is a lightweight folding adult manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of 6061-T6 aircraft aluminum. It is available in two optional versions - Heavy Duty Option and Transit System. A depth adjustable rear frame also is optional that allows for adjustments of 2 inches forward and 3 inches forward. The frame can be ordered with the center of gravity set i

Catalyst 5Vx

The Catalyst 5Vx is a lightweight folding adult manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of 6061-T6 aircraft aluminum. It is available in two optional versions - Heavy Duty Option and Transit System. The frame can be ordered with the center of gravity set in the rear, center or forward by axle position. Rear anti-tips are available for all versions. A variety of colors are

Cirrus

Cirrus is a lightweight manual wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Carbon steel frame with double-coated chorome finish and dual axle allowing seat transition to hemi-level. SEAT: 16-, 18-, or 20-inch width. UPHOLSTERY: Flame-retardant black nylon upholstery. ARMRESTS: Flip-back arms with nylon padded armrests. Arms come in a choice of full or desk style. CASTERS: Urethane front casters with caster for

Comfort Standing Wheelchair Plus Power Lift Chair (Models Ly-Esb12Sr, Ly-Esb12Dr, Ly-Esb12Ar, & Ly-Esb12Lr)

The Comfort Standing Wheelchair plus Power Lift Chair, models LY-ESB12SR, LY-ESB12DR, LY-ESB12AR, and LY-ESB12LR, is a manual wheelchair with an integrated powered standing aid designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This is a manual wheelchair with an electric powered lift mechanism that helps the user to stand up. It is available in four sizes for individuals 4 feet 8 inches to 6 feet 3 inches in height. The lift actuator is a 12/24

Compact Featherlight 757 (Model 757, 757E, 757N, 757Ne, 757W, & 757We)

The Compactor Featherlight 757 is a lightweight folding adult manual wheelchair for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 757 model, this wheelchair comes in narrow (models 757N and 757NE) and wide (models 757W and 757WE) versions. FRAME (HxLxW): 34 to 37 x 43 or 45 x 23, 25, or 27 inches. The folded dimensions (LxW) are 31 x 11 inches. The dual axle position, multi-angle caster stem and adjustable heigh

Compact Super Hemi 797 (Model 797, 797E, 797C, 797Ce, 797N, 797Ne, 797W, & 797We)

The Compactor Super Hemi 797 is a lightweight folding manual wheelchair for use by children and adults with lower extremity, mobility, or neurological disabilities or spinal cord injury as well as amputees. In addition to the standard adult 797 model, this wheelchair comes in children’s (models 797C and 797CE), narrow adult (models 797N and 797NE) and wide adult (models 797W and 797WE) versions. FRAME (HxLxW): 31 to 34 x 39 or 41 x 21, 23, 25, or 27 inches. The dual axle position, multi-angle ca

Compact Ultralight 777 (Model 777, 777E, 777N, 777Ne, 777W, 777We)

The Compactor Ultralight 777 is a lightweight folding manual wheelchair for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 777 model, this wheelchair comes in narrow (models 777N and 777NE) and wide (models 777W and 777WE) versions. FRAME (HxLxW): 34 to 37 x 44 or 46 x 23, 25 or 27 inches. The folded dimensions (LxW) are 32 x 12 inches. The dual axle position, multi-angle caster stem and adjustable height front caster

Companion Shopper (Model 5500)

The Companion Shopper, model 5500, is a manual wheelchair designed for use by individuals with lower extremity, mobility, or physical disabilities or spinal cord injury. This chair features a swing-away shopping basket and is designed for use in commercial and retail environments. FRAME: Carbon steel, chrome-plated frame with rear anti-tips. UPHOLSTERY: Flame retardant upholstery that is mildew and bacteria resistant with heavy-duty inner liners to prevent stretching. WHEELS: Rear wheels with pe

Compass Spt Wheelchair

The Compass SPT Wheelchair is an adult tilt-in-space wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. The chair is configured for front wheel manual propulsion and can be re-configured to rear wheel propulsion without any additional parts. FRAME (LxW): 35.5 to 39.5 x 22.5 to 30.5 inches. The tilt frame offers tilt in space of 0 to 45 degrees. SEAT (LxW): 15 to 22 x 14 to 22 inches. The seat to floor height is 13.5 to

Cross Wheelchair

The Swede Cross is a custom-built manual everyday wheelchair designed for use by individuals with mobility disabilities. FRAME: One piece aluminum casting side frames, aluminum double cross bars, steel back frame. Available widths: 14 to 18 inches in 1-inch increments. ARMRESTS: Height adjustable/reversible; 2 lengths with hard side guard included. UPHOLSTERY: Backrest is folding and locking back with an adjustable angle range of -7 to +15 degrees. Adjustable height range: 11.75 to 17.75 inches.

Cross-Sport

The Cross-Sport is a sport wheelchair designed for everyday use and use in occasional sporting events. FRAME: Lightweight, rigid titanium frame. WEIGHT: 15 pounds.

Cross-Sport C

The Cross-Sport C is a custom-designed sport wheelchair designed for everyday use and use in occasional sporting events. This chair enables the consumers to select the exact specifications and accessories desired for the chair. FRAME: Lightweight, rigid titanium frame with a fixed center of gravity. SEAT: Tapered seat. WEIGHT: 15 pounds.

Cruiser Anatomic (Models Cx12, Cx14, Cx16, & Cx18)

Cruiser Anatomic is a manual wheelchair designed for use by children or adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. This chair is available in standard and transit (bus/van tie-down) models. FRAME (HxLxW): Model CX12 is 36.5 x 44.5 x 21 inches, model CX14 is 36 x 36 x 23 inches, model CX16 is 37.5 x 39.5 x 26 inches, and model CX18 is 38 x 40 x 28 inches. Folded dimensions are 14 x 46 x 13 inches for model CX12, 14 x 46.5 x 14 inches for model CX14

Cyclone Advantage 4

The Cyclone Advantage 4 is an adult manual wheelchair designed for use by individuals with lower extremity or mobility disabilities and spinal cord injury. The chair is adjustable for use in everyday life or as a sport wheelchair, with a low and maneuverable configuration for tennis or a high and stable configuration for basketball. FRAME: Hand-built adjustable frame. SEAT: The seat height can be raised and lowered without changing the backrest angle.

Cyclone Enigma

The Cyclone Enigma is a lightweight sport wheelchair designed for use by individuals with lower extremity and mobility disabilities or spinal cord injury. The chair is available in rugby or basketball configurations. FRAME: Manufactured from aluminium alloy or titanium aerospace alloy tubing.

Cyclone Mtm 7020

The Cyclone MTM (Made To Measure) 720 is a lightweight manual wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME: Handbuilt frame made from 7020 aluminium alloy, with adjustable camber bar and choice of frame color. Optional one arm drive. CUSHION: Choice of cushion thickness. UPHOLSTERY: Fabric or leather upholstery; leather upholstery is available in black or red. BRAKES: Choice of brakes. CASTERS: Choice of caster size and sty

Cyclone Pro-Competition (Models Pc Ht & Pc Ti 325)

The Cyclone Pro-Competition is a sport wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Available in high tensile aluminium alloy (model P CHT) or titanium aerospace alloy (model PC Ti 325). SEAT: Tapered seat for leg stability. The chair is available with a high frame for basketball or low seating for rugby and tennis. CASTERS: Wide caster positions to prevent picking.

Duet Cycle

The Duet Cycle is designed for adults with lack of coordination or strength as a result of generalized muscle weakness or stroke which impacts the ability to independently cycle. Once you reach your destination, the wheelchair disconnects and is fully functional.  There is a removable cushioning and the twin drum-brakes are standard.

Eagle Health Aluminum Companion Chair

The Eagle Health Aluminum Companion Chair is a folding manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 32.5 x 24 inches. The frame is lightweight aluminum and is available in either black or blue. SEAT (LxW): 16.5 x 16 inches. The floor-to-seat height is 20 inches. UPHOLSTERY: Blue padded nylon upholstery. ARMRESTS: Fixed full-length armrests. WHEELS: Nylon wheels with polyurethane tires. FOOTRESTS: Detachable, swing-away footrests

Eagle Health Aluminum Frame Wheelchair

The Eagle Health Aluminum Frame Wheelchair is a folding manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 41.25 x 36 inches. The frame is lightweight aluminum and is finished in black lacquer. SEAT (LxW): 16.5 x 15.5 to 16.5 inches. The floor-to-seat height is 19.5 inches. UPHOLSTERY: Blue padded nylon upholstery. ARMRESTS: Flip-up desk-length armrests. WHEELS: Nylon wheels with polyurethane tires. FOOTRESTS: Detachable, swing-away f

Eagle Health Steel Frame Wheelchair

The Eagle Health Steel Frame Wheelchair is a folding manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 43 x 23.375 to 25.75 inches. The frame is triple-coated chrome steel. SEAT (LxW): 16.5 x 15.75, 17.75 or 19 inches. The floor-to-seat height is 19.5 inches. UPHOLSTERY: Blue padded nylon upholstery. ARMRESTS: Flip up desk-length armrests. WHEELS: Nylon wheels with polyurethane tires. FOOTRESTS: Detachable, swing-away footrests. CAPA

Easy Glide Series (Models Eg100, Eg300, Eg400, & Eg900)

Manual folding wheelchair. Chrome plated steel frame with vinyl upholstery. Seat width 16 or 18 inches. Seat depth 16 inches. Spoked 24 inch rear wheels with pneumatic tires. Solid 8 inch front snap on casters. Footrests: fixed, adjustable, swing-away, or elevating. Armrests: fixed or removable with side guards. Wheel locks. Weight: 62 pounds with legrests.

Eclipse

The Eclipse is a manual sport wheelchair that is both lightweight (16 lbs. base weight) and strong (made of alloy materials of aerospace quality). FRAME: Frame is provided with an 85 degree front end to enhance mobility with a reduced turning radius. SEAT DEPTH: 10 to 15 inches. SEAT WIDTH: 10 to 20 inches. SEAT HEIGHT: 8 to 16 inches. BACKREST: Folding or non- folding, 8 to 16 inches high, 10 to 20 inches wide. Folding design allows adjustment, upright locking, and folding within one mechanism.

Economy (Model 8555) & Economy Lightweight

The Economy 8555, Economy Lightweight is a manual folding wheelchair. The 8555 is designed for home, rental and institutional use. The hardened steel frame has a double crossbrace construction. The seat and back dimensions are: overall 24.5 w x 36.25 h x 36 7/8 l, seat width 16.25, seat from floor height 20.25, back from seat height 15.5, and seat depth 15.75 inches. The embossed upholstery has textilene inner lining, royal blue being the standard color. Extra long toggle brakes, "Uni-Mold" Mag

Enfold Push Wheelchair

The Enfold Push Wheelchair is a transport wheelchair designed for use by individuals with head injuries or cardiac or respiratory disabilities. The chair provides full lumbar, neck, and head support. The gas spring facilitates patient transfers and allows the chair to be set at any angle. The four position leg rest is standard. A washable, natural lamb's wool cover is included. COLOR: Desert, Galaxy or Multi.

Ergo Live Wheelchair

Ergo Live wheelchair is designed for use by individuals with limited mobility in their lower extremities as a result of a stroke, spinal cord injury or cerebral palsy.  It is lightweight and has a folding frame for users looking to maintain an active and independent lifestyle.  The user will enjoy adjustments like the backrest, which can be modified to 85, 90 or 95 degrees.  It has features like the optional S-Ergo seating system, which allows users to sit in comfort without sliding.  Adjustment

Etac Cross Xl Wheelchair

The Etac Cross XL Wheelchair is a heavy-duty adult folding wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. Adjustments that do not require tools can be made with one hand. FRAME: Aluminum and steel tube folding frame with twin cross-tubes, in a choice of regular or long frame. Push-handles are height-adjustable with tools and removable. Anti-tips are included. Color options are black, blue, sea green, or plum. SEAT (L

Excel 1000 Wheelchair

The Excel 1000 Wheelchair is an adult manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Diamond graphite powder-coated frame. SEAT: 16- or 18-inch seat. UPHOLSTERY: Black embossed upholstery. ARMRESTS: Permanent full-length or removable desk-length plastic armrests. FOOTRESTS: Fixed or swingaway detachable, elevating or non-elevating composite footrests. CAPACITY: 250 pounds.

Excel 2000 Wheelchair

The Medline Excel 2000 Standard Wheelchair is an adult manual wheelchair designed for use by individuals with mobility disabilities. FRAME: Carbon steel dual axle frame with chip-resistant chrome plating, powder-coated cross bars and clothing guard, heavy-duty fork and welded fork stems, and sealed bearings in fork housing for front and rear wheels. SEAT (LxW): 16 x 18 inches. UPHOLSTERY: Embossed upholstery in ruby, navy, or black. A chart pocket is included. ARMRESTS: Permanent full-length arm

Excel 3000 Wheelchair (Models Mds806150Dlx, Mds806200Dlx, Mds806250Dlx, & Mds806300Dlx)

The Excel 3000 Wheelchair is an adult manual wheelchair designed for use by individuals with mobility disabilities. FRAME: Lightweight, scissor-style frame with three-position axle and cast aluminum seat cradle. SEAT: 18 inches wide. UPHOLSTERY: Nylon upholstery. ARMRESTS: Permanent full-length arms (models MDS806150DLX and MDS806200DLX) or removable desk-length arms (model MDS806250DLX). WHEELS: Composite wheels with push-button rear wheel release. This wheelchair has three axle positions for s

Excel Extra-Wide Wheelchair (Models Mds806400, Mds806450, Mds806700, Mds806750, Mds806700Fla, Mds806750Fla, Mds806800, Mds806850, Mds806800Fla, Mds806850Fla, Mds806900, & Mds806950)

The Excel Extra-Wide Wheelchair is a heavy-duty manual wheelchair designed for use by individuals with mobility disabilities. FRAME: Carbon steel frame with chip-resistant chrome plating. SEAT: 20 inches wide (models MDS806400, MDS806450, MDS806700, MDS806750, MDS806700FLA, and MDS806750FLA), 22 inches wide (models MDS806800, MDS806850, MDS806800FLA, and MDS806850FLA), or 24 inches wide (models MDS806900 and MDS806950). UPHOLSTERY: Black on 300 pound capacity models or navy blue on all other mod

Excel K1 Basic Wheelchair

The Excel K1 Basic Wheelchair is an adult manual wheelchair designed for use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME: Frame has double coating of chrome plating powder coating and brass-threaded seat screw inserts to reduce stripping from upholstery changes.The frame features aluminum seat cradles and armlocks, and rear anti-tips. The wheels and casters have dual axles to allow for adjustment of the seat to hemi level. SEAT (DxW): 16 x 16 inches; 16 x

Excel K3 Lightweight Wheelchair

The Excel K3 Lightweight Wheelchair is a lightweight manual wheelchair designed for use by individuals with mobility disabilities. FRAME: Carbon steel frame with triple chrome plating. SEAT: 16 or 18 inches wide. UPHOLSTERY: Black nylon upholstery. ARMRESTS: Removable, padded, nylon upholstered armrests in a choice of desk length (for a 16- and 18-inch wide chair) or full length (18-inch chair only). CASTERS: Front casters. WHEELS: Rear wheels with composite handrims. FOOTRESTS: Swing-away detac

Excel K4 Lightweight Wheelchair

The Excel K4 Lightweight Wheelchair is a lightweight manual wheelchair designed for use by individuals with mobility disabilities. FRAME: Chromoly frame with chip-resistant triple chrome plating and cast aluminum seat cradles. SEAT: 16, 18, 20, or 22 inches wide. The sectional seat back can be adjusted from 15 to 19 inches high. UPHOLSTERY: Black nylon. ARMRESTS: Swing-back desk-length arms (available for all seat widths), swing-back removeable full-length arms (18-inch seats only), or desk-leng

Excel Recliner (Models Mds808350, Mds808450, Mds808550 & Mds808650)

The Excel Recliner is a manual reclining wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This wheelchair provides full back and headrest support as the user reclines from 90 to 160 degrees. FRAME: Chip-resistant chrome-plated carbon steel frame with dual axle, dual sealed precision bearings, and anti-tippers. SEAT (DxW): 17 x 16 inches (model MDS808350); 17 x 18 inches (model MDS808450); 17 x 20 inches (model MDS808550); or 17 x 22 inches (model MDS80

Excel Shuttle (Models Mds809650, Mds809750, Mds809850 & Mds809585)

The Excel Shuttle, models MDS809650, MDS809750, MDS809850 and MDS809585, is a heavy-duty wheelchair designed for use by heavy or obese adults with mobility or lower extremity disabilities or spinal cord injury. The chair is latex-free. FRAME: Stainless steel frame with double cross brace. The wheels have a triple axel to adjust the hemi height of the seat. SEAT (WxD): 24 x 20 inches (MDS809650); 26 x 20 inches (MDS809750); 28 x 20 inches (MDS809850); and 30 x 20 (MDS809585). The seat has polypro

Excel Transport Wheelchair (Models Mds808150 & Mds808200)

The Excel Transport Wheelchair is a lightweight transport wheelchair designed for use by individuals with mobility disabilities. FRAME: Chrome-plated carbon steel folding frame. SEAT: 17 inches wide (model MDS808150) or 19 inches wide (model MDS808200). UPHOLSTERY: Nylon upholstery. ARMRESTS: Permanent full-length arms with padded armrests. WHEELS: Composite wheels with dual-sealed precision bearings. FOOTRESTS: Detachable, swing-away footrests made of die-cast aluminum. CAPACITY: 250 pounds.

Ez Rider (Models Ez12, Ez14, Ez16, & Ez18)

EZ Rider is a manual wheelchair designed for use by children or adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. This folding lightweight wheelchair is available in regular and transit (bus/van tie-down) models. FRAME (HxLxW): Model EZ12 is 36.5 x 43 x 19.5 inches, model EZ14 is 37 x 44 x 20.5 inches, model EZ16 is 37 x 45 x 21 inches, and model EZ18 is 37 x 45 x 24 inches. Folded dimensions are 14.5 x 43 x 13.5 inches (model EZ12), 14.5 x 44 x 12 inche

Focus (Model 818)

The Focus, model 818, is an adult wheelchair designed for use by individuals with mobility or severe physical disabilities. FRAME: The adjustable modular frame has an overall width of 26 5/16 inches. The frame sdjusts from 15.5 to 19 inches. The push handles adjust from 38 3/16 to 41 7/8 inches high. Adjustable anti-tips adjust to five different heights in 3/16-inch increments. SEAT: The seat height adjusts from 15 3/8 to 20 inches. Built-in seat extenders provide support for an extended seat.Th

Freedom 2

Freedom 2 is a manual adult wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 15 to 19 inches (Regular) or 17 to 21 inches (Long) x 11 to 18 inches in one-inch increments. This chair is available in a choice of folding or rigid frame type, with bend push handles and an optional transport package for bus/van tie-down. The frame is powder coated in a choice of red, green, blue, yellow, white, black, turquoise

Freedom 2 Hp

Freedom 2 HP is a manual wheelchair designed for use by children or adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 15 to 19 inches (Regular) or 17 to 21 inches (Long) x 11 to 18 inches in one-inch increments. This chair is available in a choice of a folding or rigid frame with bend push handles. An optional transport package for bus/van tie-down is available. The frame is powder coated in a choice of red, green, blue, yellow, white, black,

Freedom Sp1

Freedom SP1 is a manual wheelchair designed for use by children or adults with mobility disabilities. FRAME: Lightweight fixed front end frame in a choice of folding or rigid styles and long or standard configurations. Anti-tip tubes and short push handles are standard. Medium or tall push handles are available at no charge and adjustable clamps and push handle extensions are extra cost options. The frames accommodate growth and are available in a choice of frame widths from 10 to 18 inches wid

Freedom Sp1 Folding Tilt

The Freedom SP1 Folding Tilt is a manual tilt in space wheelchair designed for use by children or adults with mobility disabilities. FRAME: Lightweight fixed front end frame in a choice of folding or rigid styles and long or standard configurations. Anti-tip tubes and short push handles are standard. Medium or tall push handles are available at no charge and adjustable clamps and push handle extensions are extra cost options. The frames accommodate growth and are available in a choice of frame

Freedom Sp3

Freedom SP3 is a manual wheelchair designed for use by children or adults with mobility disabilities. FRAME: Lightweight frame in a choice of folding or rigid styles and long or standard configurations. Anti-tip tubes and short push handles are standard. Medium or tall push handles are available at no charge and adjustable clamps and push handle extensions are extra cost options. The frames accommodate growth and are available in a choice of frame widths from 10 to 18 inches wide in one inch inc

Freedom Sp3 Folding Tilt

Freedom SP3 Folding Tilt is a manual tilt in space wheelchair designed for use by children or adults with mobility disabilities. FRAME: Lightweight frame in a choice of folding or rigid styles and long or standard configurations. Anti-tip tubes and short push handles are standard. Medium or tall push handles are available at no charge and adjustable clamps and push handle extensions are extra cost options. The frames accommodate growth and are available in a choice of frame widths from 10 to 18

Frontier Mwd All Terrain Wheelchair

The Frontier MWD All-Terrain Wheelchair is a sport wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. This wheelchair is designed for off-road use. FRAME (LxW): 905 millimeter overall length x 710 millimeter base width. The frame has six-wheel articulating suspension. CONTROLS: DX2 High dynamic controls. MWD: Mid-wheel drive. SEAT (LxW): 16, 19, or 20 x 16, 18, or 20 inches; larger sizes are also available. Available s

Gizmo Tilt-In-Space Wheelchair

The Gizmo Tilt in Space Wheelchair is a lightweight wheelchair designed for use by children or adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): Cane length of 8 to 13 inches (extra small), 10 to 15 inches (small), 13 to 18 inches (medium), or 15 to 20 inches (long) x 10 to 18 inches wide in one-inch increments. The chair is available in a choice of a folding or rigid frame with optional transport package for bus/van tie-down. The chair has 4

Guardian Easy Care 1000 Wheelchair

The Guardian Easy Care 1000 Wheelchair is a manual wheelchair designed for use by individuals with walking disabilities and mobility disabilities. FRAME: Chrome-plated, carbon steel frame. SEAT: Choice of seat widths of 16 inches and 18 inches. UPHOLSTERY: Vinyl upholstery is flame retardant. ARMRESTS: Fixed full length armrests. WHEELS: Composite mag wheels are molded with contours. Sealed bearings are maintenance free. FOOTRESTS: Fixed footrests.

Guardian Easy Care 2000 Wheelchair

The Guardian Easy Care 2000 Wheelchair is an adult manual wheelchair designed for use by individuals with mobility disabilities. It is equipped with a dual axle which allows the seat to be lowered to hemi height. There is a full sized chart pocket on the backrest. FRAME: The frame is chrome-plated, carbon steel with front rigging mounts. SEAT: The seat widths are 16 or 18 inches. ARMRESTS: A choice of padded removable desk-length or fixed full-length armrests is offered. WHEELS: Composite mag

Guardian Easy Care High Strength Lightweight 4000

The Breezy Easy Care 4000 is a folding adult manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 30.5 x 23 to 27 inches. The frame is chrome-plated carbon steel. SEAT (LxW): 16 to 18 x 16 to 20 inches. The floor-to-seat height is 19.75 inches. UPHOLSTERY: Padded nylon upholstery. ARMRESTS: Removable flip-back desk-length arms. WHEELS: Composite mag wheels. FOOTRESTS: Swing-away footrests or elevating leg rests. CAPACITY: 250 pounds. WE

Guardian Escort

The Guardian Escort is a folding manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 18 x 16 inches. The folded width is 14 inches. Rear ant-tips are optional. SEAT (LxW): 16 x 16, 18, or 20 inches. The floor-to- seat height is 20 inches. UPHOLSTERY: Padded nylon or vinyl. ARMRESTS: Removable, padded, full- or desk-length arms. BRAKES: Spring-lock assisted wheel locks. CASTERS: 8-inch solid casters. WHEELS: 24-inch rear wheels are stan

Guardian Escort Wheelchair

The Guardian Escort is an adult manual wheelchair designed for use by individuals with physical disabilities, lower extremity disabilities, and mobility disabilities. FRAME: scratch- and rust-resistant frame with silver finish. UPHOLSTERY: Padded nylon or vinyl. ARMRESTS: Features a three-point anchor and toggle release for secure attachment and ease of removal. Full- length, traditional or standard desk legth arms with armpads are available. BRAKES: Spring-assisted wheel locks. FOOTRESTS: Optio

Gunnell Rehab Ram

The Gunnell Rehab Ram is a manual reclining wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (HxW): 22 to 30 x 25.5 to 38.5 inch heavy-duty growing frame features an open design for leg contractures and ambulation. The upper frame can be reversed to reposition back wheels for users with limited arm and shoulder range of motion. The push handles are height adjustable to maintain handle to floor height. This chair is available in 19 different fra

Hammer

The Hammer is a sport wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. This wheelchair has a wide front-end "hammer-head" made of aluminum tubing that can be used for offense or defense in contact sports such as rugby, hockey, football, and softball. FRAME: The "Hammer" is constructed of aerospace drawn tubing. Anti-tippers are included. The frame is available in a choice of over 20 solid colors, raw (unpainted aluminu

Hospital Wheelchairs (934, 944, 954, & 964 Series)

The Hosptial Wheelchair 934, 944, 954, 964 Series, Solid Oak are non-folding, rugged and durable with four heavy duty coil springs insure a comfortable ride. The model selections include: 934 Standard Adult, 944 Wide Adult, 954 Junior, and 964 Commode. The seat and back measures: overall 23.5 - 30 w x 44 - 50 h, seat width 15 - 20.5, seat from floor height 19 - 12.5, back from seat height 25.5 - 30.75 depth of seat 14.5 - 19 inches. The reclining back is adjustable from vertical to 70 degrees. T

Hugo 1000

The Hugo 1000 is an adult wheelchair. FRAME: Chrome plated / carbon steel; folding; 22.5 to 25.5 inches (overall width - open); 10.5 to 11.5 inches (overall width - closed). SEAT: 16.5 to 18 inches (width); 16 inches (depth); 21 inches (height); 16 inches (back height). ARMRESTS: Detachable. BRAKES: Manual. CASTERS: 8-inch molded caster wheels. FOOTRESTS: Detachable. WEIGHT: 37 to 42 pounds. OPTIONS: Choice of five arm styles available at extra cost. WARRANTY: Care Catalog Services will honor al

Icon A1 Wheelchair

The Icon A1 Wheelchair is a modular manual wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This wheelchair can be adjusted to fit the user's changing body and needs. The suspension can be set to the user's exact weight or eliminated, and the compression and rebound can be tuned to reduce fatigue. FRAME: Fully adjustable rear suspension with center of gravity at 0, 1, 2, 3, or 4 inches. The wheelbase is available with widths of 13 t

Impala

The Impala is a manual wheelchair designed for use by larger children and adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 88 to 120 x 102 x 62 centimeters (size 1), 88 to 120 x 102 x 66 centimeters (size 2), or 88 to 120 x 102 x 71 centimeters (size 3). SEAT (LxW): 40 to 45 x 40 centimeters (size 1), 44 to 49 x 44 centimeters (size 2), or 44 to 49 x 49 centimeters (size 3). The adjustable back height is 50 to 60 centimeters (size 1) or 54

Invacare 9000 Sl

The Invacare 9000 SL is a manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with crossbraces in a variety of colors. Push handles are standard. The standard frame color is chrome; options include deep purple, black, or silver vein. SEAT: The seat is available in a choice of 16, 18, or 20 inches wide. The standard seat depth is 16; 18 inches is optional. The standard seat-to-floor height is available in 17.5,

Invacare 9000 Xdt

The Invacare 9000 XDT is a manual adult wheelchair designed for use by tall and/or heavy individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with crossbraces in a variety of colors. Push handles are standard. The frame is available in tall, standard adult, and hemi. The standard frame color is chrome; cobalt blue, red, black, or silver vein are optional. SEAT: The seat is available in a choice of 16, 18, 20, or 22 inches wide. The standard seat depth is

Invacare 9000 Xt

The Invacare 9000 XT is a lightweight manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with crossbraces in a variety of colors. Push handles and anti-tips are standard. The frame is available in standard adult, hemi, and super hemi. SEAT: The seat is available in a choice of 14, 15, 16, 17, 18, 20 or 22 inches wide on the adult and hemi models and 14, 15, 16, 17, or 18 inches on the super-hemi model. The st

Invacare 9000 Xt Full Recliner

The Invacare 9000 XT is a reclining manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with crossbraces. The standard frame color is chrome; red, black, and silver vein are available. Push handles and anti-tips are standard. SEAT: The seat is available in a choice of 14, 16, 18, 20 or 22 inches wide. The standard seat depth is 16 inches; 18 inches is optional. The standard seat-to-floor height is 19.5 inches

Invacare A-6S / F-6S

The Invacare A-6S/F-6S is a lightweight manual sport wheelchair designed for use by individuals with mobility disabilities. FRAME: Rigid frame in a variety of colors with dual rear and front customizable suspension. Both models feature a telescoping wheelbase which enables the chairs to be set up for maximum stability for first-time users or for maximum performance. SEAT: The A-6S has an adjustable seat angle and the F-6S has a fixed seat angle. The seat widths are available from 12 to 20 inches

Invacare A6 / F6

The Invacare A6/F6 is a lightweight manual sport wheelchair designed for use by individuals with mobility disabilities. FRAME: Rigid frame in a variety of colors. Both models feature a telescoping wheelbase which enables the chairs to be set up for maximum stability for first-time users or for maximum performance. SEAT: The A6 has an adjustable seat angle and the F6 has a fixed seat angle. The seat widths and depths are available from 14 to 20 inches in one-inch increments. The seat-to-floor hei

Invacare Careguard K2000

The Invacare CareGuard K2000 is a folding adult manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 31.25 x 23 or 25 inches with permanent arms. With removable arms the width is 24.25 or 26.25 inches. SEAT (LxW): 16 x 16 or 18 inches. The floor-to-seat height is 20 inches with 24-inch wheels. The hemi floor-to-seat height is 18 inches. UPHOLSTERY: Black flame- retardant and bacteria resistant vinyl upholstery. ARMRESTS: Padded, fixed-h

Invacare Ivc 9000 Topaz Wheelchair

The Invacare IVC 9000 Topaz is a folding bariatric adult manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Triple chrome-plated, carbon steel frame. Options include an oxygen carrier, telescoping IV rod, and a crutch/cane carrier. SEAT (LxW): 18 or 20 x 20 to 30 inches in 2 inch increments. The floor-to-seat height is 15.5, 17.5, or 19.5 depending on wheel and caster package. UPHOLSTERY: Black or blue vinyl or nylon. The upholstery is flam

Invacare Ivc Tracer Ex2 Wheelchair

The Invacare IVC Tracer EX2 is a manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Carbon steel frame with triple chrome plating and 14-gauge cross braces. SEAT (LxW): 16, 18, or 20 x 16 inches. The floor-to-seat height is 17.5 to 19.5 inches. UPHOLSTERY: Flame-retardant vinyl dual-embossed upholstery with heavy-duty inner liners in blue, ruby, or black. ARMRESTS: Padded full-length permanent arms, padded full-length fixed-height removable

Invacare Mg

The Invacare MG is a manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with 16-gauge. Push handles are standard. The chrome frame is standard; black and silver vein are available. SEAT: The seat is available in a choice of 16 or 18 inches wide. The seat depth is 16 inches. The seat-to-floor height is 21 inches. The fixed back height is 16 inches. UPHOLSTERY: Flame-retardant vinyl upholstery in a choice of

Invacare Mvp

The Invacare MVP is a lightweight manual wheelchair designed for everyday use by people with mobility disabilities. FRAME: Two-part folding aluminum frame with a swing-away or fixed front frame and curved, square or extended (growth) frame. The frame is available in 20 colors at no additional charge. Widths range from 25 to 32 inches. A 10-degree bend back with push handles is standard; sportster and fixed back heights (12, 14, 16 and 18 inches) options with no push handles or straight push hand

Invacare Patriot

The Invacare Patriot is a lightweight manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Lightweight folding frame in a variety of colors. Push handles are standard. A built-in amputee attachment provides an amputee setting. SEAT: The seat width is available in 14, 16, 17, 18, or 20 inches. The seat depth is offered in 16 or 18 inches. The seat-to-floor height is available in adult, hemi, and factory-set super hemi. The standard seat-to-floor heights are

Invacare Pro Spin X4

The Invacare ProSPIN X4 is a lightweight folding manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: The lightweight aluminum frame available in 21 different colors. SEAT (LxW): 14 to 20 x 14 to 20 inches. The front floor-to-seat height is 15.5 to 21.5 inches and the rear floor-to-seat height is 13.5 to 20.5 inches. The back can be tilted up to 15 degrees forward or back. ARMRESTS: Flip-up height-adjustable padded arms in two-point or T-arm

Invacare Top End Transformer All Sport

The Invacare Top End Transformer All Sport is a manual sports wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This chair can be adjusted to play tennis, softball, basketball, hockey, football, table tennis, or badminton. FRAME: Rigid 606IT6 aluminum frame with a removable offensive wing or bumper and an adjustable center of gravity. The frame is available in Tall or Short sizes. SEAT (LxW): 12 to 20 x 12 to 20 inches. The floor-to-seat height is adju

Invacare Tracer Dlx

The Invacare Tracer DLX is a manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with 14-gauge crossbraces. The frame is available in standard adult and hemi models. Push handles are standard. SEAT: Sling seat in a choice of 16, 18, or 20 inches wide. The standard seat depth is 16 inches. The seat-to-floor height is available from 15.5 to 19.5 inches in one inch increments; 17.5 to 19.5 inches is standard and

Invacare Tracer Ex

The Invacare Tracer EX is a manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with 14-gauge crossbraces. Push handles are standard. SEAT: Sling seat in a choice of 16, 18, or 20 inches wide. The seat depth is 16 inches. The seat-to-floor height is 21 inches. The fixed back height is 16 inches. UPHOLSTERY: Flame-retardant dual-embossed vinyl upholstery in midnight blue or ruby with heavy-duty liners. ARMRESTS

Invacare Tracer Iv

The Invacare Tracer IV is a heavy-duty manual adult wheelchair designed for use by heavy individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with dual crossbraces. The reinforced frame includes gussetted side frame and caster journals. Push handles are standard. SEAT: Sling seat in a choice of 20, 22, or 24 inches wide. The seat depth is 18 inches. The seat-to-floor height is 21 inches. The fixed back height is 16 inches. UPHOLSTERY: Flame-retardant du

Invacare Tracer Sx

The Invacare Tracer SX is a manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with 14-gauge crossbraces. The frame is available in standard adult and hemi models. Push handles are standard. SEAT: Sling seat in a choice of 14, 16, 18, 20, or 22 inches wide. The standard seat depth is 16 inches; an 18-inch depth is available. The seat-to-floor height is available from 15.5 to 19.5 inches in one inch increments

Invacare Tracer Sx Recliner

The Invacare Tracer SX is a reclining manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Triple chrome-plated carbon-steel frame with crossbraces. Push handles and anti-tips are standard. SEAT: The seat is available in a choice of 14, 16, 18, 20 or 22 inches wide on standard and hemi frames. The standard seat depth is 16 inches; 18 inches is optional. The standard seat-to-floor height is 19.5 inches. The back height is 23 inches with the removable 10-inch

Invacare Tracer Transport

The Invacare Tracer Transport is an attendant-propelled transport wheelchair designed for use by individuals with mobility disabilities. FRAME: Triple chrome-plated carbon-steel frame with crossbraces. Push handles are standard. SEAT: Sling seat in a choice of 14, 16, 18, or 20 inches wide. The seat depth is 16 inches. The seat-to-floor height is 21 inches. The back is available in a fixed or a fold-down model (the fold-down back is not avaiable with the 14-inch seat) and the height is 16 inche

Invacare Xtra

The Invacare Xtra is a folding adult or children's manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Three-piece modular frame with one-inch aluminum tubing. The front frame section can be replaced to allow for growth. The square rear frame allows the wheels to be mounted directly under the back canes. This chair is available in a variety of colors. SEAT (LxW): 14 to 22 x 14 to 22 inches. ARMRESTS: Two-point or swing-away arms. WHEELS: Th

Itilt2

The iTilt2 is a manual reclining tilt in space wheelchair designed for use by individuals with lower extremity and mobility disabilities and spinal cord injury. It has dynamic tilt up to 47 degrees and manual recline up to 30 degrees. FRAME: 16, 18, 20, 22, or 24 inches wide. It has a tension adjustable spring tilt system with dual locking strut, care giver control lever, and tilt angle indicator. The iTilt2 has an adjustable rear axle; 0.5-inch wheel bearings; anti-tippers. SEAT: Adjustable sea

Jewel Mps Wheelchair

The Jewel MPS Wheelchair is a manual tilt-in-space wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities. The tilt-in-space feature is foot-operated and hydraulically-assisted. FRAME (LxW): 40.75 inches overall length x 22 inches at base. SEAT (LxW): 16, 19, or 20 x 16, 18, or 20 inches. The MPS Supportive Seating System includes an anti-thrust seat front and lateral contouring on both the padded seat and padded backrest. The backrest is 22 inche

Km-802F

KM-802F is a ultra lightweight wheelchair that is designed for use by individuals with mobility disabilities or spinal cord injury.

Laurentian Lightweight Wheelchairs

Lightweight manual drive wheelchair, folding. Lightweight steel and alloy frame, stainless steel rear wheels, 7/8 inch axle mounted through the backpost and pneumatic rear tires. Other features same as standard Laurentian wheelchair. Weight 33 to 36 pounds.

Laurentian Wheelchair

Manual drive wheelchair, folding. Chrome plated steel frame. Available with swinging detachable footrests and fixed or detachable arms. Seat width 16 or 18 inches, seat height 19 5/8 inches. 8 inch molded front caster with sealed doubled ball bearings. Padded upholstery with reinforced upper back area. Versa Rim 24 inch rear wheels with nonsmoking gray rubber tires and sealed wheel bearings. Wheel locks. Space saver detachable arm available to reduce overall width of chair by 1 1/2 inches. Weigh

Libre

The Libre is a manual wheelchair designed for use by children or adults with mobility disabilities. FRAME: Lightweight frame in a choice of folding or rigid styles and long or standard configurations. Anti-tip tubes and short push handles are standard. Medium or tall push handles are available at no charge and adjustable clamps and push handle extensions are extra cost options. The frames accommodate growth and are available in a choice of frame widths from 10 to 18 inches wide in one inch incr

Libre Tilt

The Libre Tilt is a manual tilt in space wheelchair designed for use by children or adults with mobility disabilities. FRAME: Lightweight frame in a choice of folding or rigid styles and long or standard configurations. Anti-tip tubes and short push handles are standard. Medium or tall push handles are available at no charge and adjustable clamps and push handle extensions are extra cost options. The frames accommodate growth and are available in a choice of frame widths from 10 to 18 inches wi

Lifestand Lsa Helium

The LifeStand LSA Helium is a stand up wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. This is a manually propelled, manual standing wheelchair. The user lifts him- or herself to a standing position by grabbing standing mechanism handles and using the same motion that propels the chair forward, with assistance from a hydraulic cylinder system which is adjusted to the individual's weight. FRAME (HxLxW sitting): 78 or 9

Lifestand Lse

The LifeStand LSE is a stand up wheelchair designed for use by children and adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. This mobile standing frame consists of a manually propelled wheelchair with a power stand-up unit. When the chair is in standing position, the user's chest, knees, and ankles are supported in a straight line. FRAME (LxWxH sitting): 109 x 59, 63, 67 or 72 x 86, 98 or 100 centimeters. The length when standing is 104 centimeters. Anti

Lightweight Wheelchair (Models 1820 & 1821)

The Lightweight Wheelchair is a lightweight wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding crossbrace frame. SEAT (LxW): 16 x 16 inches (model 1820) or 16 x 18 inches (model 1821). The seat-to- floor height is 19.5 inches, and the padded backrest is height adjustable from 15 to 19 inches. UPHOLSTERY: Lightweight nylon upholstered seat. ARMRESTS: Included. FOOTRESTS: Optional swingaway footrests (model 1822) are available. CAPACITY: 300 pounds. WEIGHT: 32 po

Lt-800T Lightweight Wheelchair

The LT-800T Lightweight Wheelchair is a lightweight adult manual wheelchair designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. FRAME (HxLxW): 36 x 31 x (22 or 24) inches. Folding high strength aluminum frame. Folded width is 11 inches. Frame color is silver vein. Anti-tippers are optional. SEAT (DxW): 16 x (16 or 18) inches. Seat to floor height is 19 inches. Backrest is foldable, and back height is 16 inches. Options include seat belt, carrying

Lt-950 Ultra Lightweight Wheelchair

The LT-950 Ultra Lightweight Wheelchair is a lightweight adult manual wheelchair designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. FRAME (HxW): 37 x 26 inches. Folding frame is made of durable aluminum. Available in black. Anti-Tippers are optional. SEAT (WxD): 18 x 15 inches. Seat to floor height is 19.5 inches. Backrest height is 19 inches, and the backrest folds down. Foldable, adjustable headrest, carry pouch and a seat belt are optional. CU

LT-980 Ultra Lightweight Wheelchair

The LT-980 Ultra Lightweight Wheelchair is a lightweight manual wheelchair designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. FRAME (HxLxW): 38 x 28 x (26 or 28) inches. Frame is made of durable aluminum and folds for storage. Folded dimensions are (HxW): 29 x 13 inches. Available in black or merlot mica. Anti-tippers optional. SEAT (WxD): (18 or 20) x 16 inches. Seat to floor height can be adjusted to 18 or 19 inches. Backrest height is 19 inche

Lt-K5 Ultra Lightweight Wheelchair

The LT-K5 Ultra Lightweight Wheelchair is a lightweight adult manual wheelchair designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. FRAME (HxLxW): 34 x 38 x (24.5 or 26.5) inches. The folding frame is constructed from high-strength aluminum. Folded width is 14 inches. It has a height-adjustable axle that allows for various seat heights. Color is black. Anti-tippers are optional. SEAT (WxD): (16 or 18) x 17 inches. The seat to floor height is adju

M.a.c. (Multi-Adjustable Chair)

The M.A.C. (Multi-Adjustable Chair) is a tilt-in-space wheelchair designed for use by individuals with mobility disabilities. FRAME: The tubular steel frame collapses for transport. The frame is available in a choice of narrow (14 inches wide), standard (16 inches wide), or wide configurations (19 inches wide), and is offered in a choice of of 10 standard colors; one specialty color and custom colors are available at an extra cost. Push handles are standard. An expandable frame is optional. SEAT

Manual Deluxe Adult Wheelchairs

The Manual Deluxe Adult Wheelchairs feature an 18-inch wide seat with pocket, deluxe removable desk arms, ABS plastic armrests, swing-away detachable or elevating footrests, and 23-inch spoked rear wheels with solid rubber tires and sealed precision bearings.

Manual Standard Adult Wheelchairs

The Manual Standard Adult Wheelchairs feature standard fixed arms, ABS plastic armrests, a pocket at the back of the 18-inch wide seat, swing-away detachable footrests or elevating footrests, 23-inch spoked rear wheels with solid rubber tires and sealed precision bearings.

Mart Cart Shopper's Aid

The Mart Cart Shopper's Aid is a transport wheelchair designed for use by shoppers with mobility disabilities. This lightweight chair is designed to fit behind a standard shopping cart (not included), with space to seat passengers of all sizes, including one or two children or a single adult. Its universal mounting system attaches to the chair to a shopping cart by tightening a few bolts. FRAME: Available frame colors are red, blue, green, gray, or chrome. A platform under the seat provides addi

Maxima

Maxima is an adult manual wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury. A tool kit is includeed. FRAME: Chrome molly or titanium frame in a variety of colors with adjustable camber bar and frame protectors. Special finishes, anti-tips, push handles, an side gaurds are optional. SEAT: Ergonomic seating is optional. UPHOLSTERY: Adjustable upholstery is standard; leather upholstery and a folding backrest are optional. C

Merlexi Craft Liberty I

Merlexi Craft Liberty I is a lightweight manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME:It has a molded synthetic frame for light weight. The folding frame is made of molded reinforced polypropylene and is 13.5 inches wide when folded with wheels. Color options include red, blue, green, and black. The ergonomically designed full control handle is molded into the chair side. SEAT (LxW): 17 to 18 x 16 to 1

Merlexi Craft Liberty Ii

Merlexi Craft Liberty II is a lightweight manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The chair has a reinforced polypropylene body and the frame folds to 13 inches wide with wheels. An ergonomically-designed full control handle is molded into the chair side. Color options include red, blue, green, and black. SEAT (LxW): 17 to 18 x 16 to 18 inches. The chair has a solid contoured FormFold seat with f

Modified Stair Climber

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted modification to a stair climber for an individual who uses a wheelchair. The individual attends a mediation class that requires him to get up a flight of 20 steps. Previously he used a commercially available stair climber that clamped onto his wheelchair and lifted him up the stairs. This adaptation was working well until the user got a new wheelchair which was not compatible with the stair climber. The new wheelchair has a

Mvp-502-Ms Lighweight Reclining Wheelchair

The MVP-502-MS is a lightweight manual wheelchair with a reclining back designed for use by adults with lower extremity or mobility or spinal cord injury. FRAME (HxLxW): 52 x 47 x (24, 26 or 28) inches. Overall width of the wheelchair is dependent on the seat width selected. The folding frame is constructed of high strength aircraft grade aluminum. The folded width is 14, 15 or 16 inches, depending on the seat width. The frame color is diamond black. Anti-tippers and rigidifying push bar are sta

Neater Uni-Chair

The Neater Uni-Chair is designed for use by individuals with hemiplegia associated with a stroke. It allows users with use of one arm and foot to operate a manual wheelchair efficiently. Users can a single hand rim to drive both wheels.

Newport Extra Wide (Models 375, 375E, 375X, & 375Xe)

The Newport Extra Wide is an heavy-duty adult manual wheelchair designed for use by large individuals with mobility disabilities. FRAME: Heavy-duty, double cross-braced, high-lustre chrome-plated carbon steel folding frame with high stress areas utilized. All models are 12 inches wide when folded. Models 375 and 375X are 37 x 42 x 32 inches and models 375E and 375XE are 37 x 45.5 x 32 inches. Anti-tip and anti-folding devices are optional. SEAT (WxHxD): The seat on models 375 and 375E is 22 x

Odyssey 700 Series

The Odyssey 700 Series are manual wheelchairs designed for use by individuals with mobility disabilities. FRAME: Hammer tone grey finish which resists chips and scratches. Anti-tips are available. SEAT: The seat width is 16 inches on models 706 and 716 and 18 inches on models 708, 718, 728, 738, 745, and 747. All models have a seat depth of 16 inches. Models 745 and 747 are hemi-height chairs with a height of 17 and 18 inches respectively. Other models have a seat height of 19 inches. A seat be

Orion Ii

The Orion II is an adult manual tilt-in-space wheelchair designed for use by individuals with mobility, lower extremity, neurological, or severe physical disabilities or spinal cord injury. FRAME (LxWxH): 34.5 x 27.5 x 44 inches. The seat-to-floor height ranges from 13.25 to 20 inches, depending on the choice of wheels and casters. The frame is equipped with a low or high push bar and cane-style push handles. A multi-adjustable axle plate is standard. Rear anti-tips are optional. The frame is av

Orthofab Ch Wheelchair

The Orthofab CH Wheelchair is a manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: Folding aluminium composite frame includes side pouch for personal belongings and a clear plastic window for an identification label. SEAT (LxW): 16 x 16, 17 x 16, 18 x 16, 18 x 18, 20 x 16, or 20 x 18 inches. The seat is a removable tension-adjustable sling with folding handle. The adjustable-tension sling back has height ad

Parafree Wheelchair

---- PROTOTYPE --------- PURPOSE: To design a prototype of a minimalist wheelchair for individuals with lower extremity or mobility disabilities or spinal cord injury who are looking for a functional, stylish, and sporty mobility solution that provides a little extra workout throughout the day. Parafree is a minimalistic wheelchair with a unique frame structure designed to compel individuals with paraplegia to maintain constant balance, encouraging abdominal, back and core muscle training. The i

Pollywog Transport Chair

The Pollywog Transport Chair is a transport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This transport chair can be transformed into a self-propelled wheelchair by removing the rear casters and substituting 24-inch wheels (included). FRAME: All aluminum frame. SEAT: 18-inch seat width. This chair has a fold-down back with carry pocket. UPHOLSTERY: Nylon upholstery. ARMRESTS: Full-length folding arm. BRAKES: Dual brakes for use as wheelchair or tra

Poly-Fly High Strength, Light Weight Wheelchair/flyweight Transport Chair Combo (Models Tr16, Tr18 And Tr20)

The Poly-Fly High Strength, Light Weight Wheelchair/Flyweight Transport Chair Combo, models TR16, TR18 and TR20, is a manual lightweight wheelchair and transport wheelchair for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. The chair can be converted from a standard manual wheelchair to a transport wheelchair by removing the large rear wheels so that the chair rolls on 4 casters that are fixed in the rear and swivel in front. FRAME (LxWxH):

Prima

Prima is a manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: Overall width is seat width plus 8.5 inches. Minimum folded width is 11 inches. The frame is made of aircraft quality aluminum tubing with epoxy paint in choice of six colors. SEAT (LxW): 14, 15, 16, 17, 18, 19, or 20 inches x 14, 15, 16, 17, or 18 inches (single cross frame) or 16, 17, 18, 19, 20, 21, or 22 inches (double cross frame). The seat

Prima Si (Tango) Wheelchair

The Prima si Wheelchair, also called Tango, is a manual tilt-in-space wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabiltiies or spinal cord injury. FRAME: Overall frame length without the footrest is 27 to 33 inches with a 20-inch wheel, 28 to 34 inches with a 22-inch wheel, and 29 to 35 inches with a 24-inch wheel. The overall width is seat width plus 8.25 to 9.75 inches. This chair tilts from minus 5 to plus 45 degrees with three positions for b

Pro-Tennis Ace & Pro-Tennis Elite

The Pro-Tennis Ace and Pro-Tennis Elite are sport wheelchairs designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. Both models are designed specifically for use in playing wheelchair tennis. FRAME: Adjustable-height frame constructed from titanium aerospace alloy tubing. The Pro-Tennis Elite has a fully loaded frame with integral camber bar. SEAT: The Pro-Tennis Ace has a fixed seat with an adjustable camber bar. FOOTRESTS: All models

Qr Series (Model 2058-34)

The QR Series 2058-34 is an adult manual drive wheelchair. FRAME: The folding frame is made of hardened steel with an endruro coat high lustre finish. The frame weights 34 pounds without the footrest. The overall width of the frame is 25 inches. Stainless steel, screw attached clothing guards are standard. From the basic 2058 frame style, a complete line of twenty-four different wheelchairs are available. SEAT: Seat width 18 inches, seat depth 16 inches, standard back height 16 inches. The QR Se

Quickie 2

The Quickie 2 is a manual drive, ultralight adult wheelchair. FRAME: Folding anodized aluminum frame with a choice of straight or rounded rear side frame. The frame widths range from 11 to 20 inches in regular, long, hemi, and hemi long configurations. Anti-tip tubes are optional. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in 12- or 16-inch depths. Optional seat depths include 10, 11, 13, 14, 15, and 17 inches. Seat widths are .5 inch n

Quickie 2Hp

The Quickie 2HP is a manual drive, high-performance ultralight adult wheelchair. FRAME: Folding anodized aluminum frame with a choice of a 60- or 70-degree fixed front frame and rounded or straight rear frame. The frame widths range from 11 to 20 inches in kids, regular, long, or short configurations. Anti-tip tubes and impact guards are optional. The frame is available in 11 standard colors and 6 custom colors. SEAT: The standard seat is available in 12- or 16-inch depths. Optional seat depths

Quickie 2Hp Titanium

The Quickie 2HP Titanium is a manual drive, high-performance ultralight adult wheelchair. FRAME: Folding titanium frame with titanium hardware in a choice of a 60- or 70-degree fixed front frame and rounded or straight rear frame. The frame widths range from 11 to 20 inches in kids, regular, long, or short configurations. Anti-tip tubes and impact guards are optional. The frame is available in 11 standard colors and 6 custom colors. SEAT: The standard seat is available in 12- or 16-inch depths.

Quickie Gp And Quickie Gpv

The Quickie GP and Quickie GPV are lightweight adult manual wheelchairs for sport and daily use. FRAME: One-piece rigid frame with a 70-degree front frame bend. The standard frame is 10 inches high in the front and 9 inches high in the rear. Optional short, tall, and custom frames are also available. The standard frame is available in 14- or 16-inch widths; 12-, 13-, 17-, 18-, 19-, and 20-inch widths are available at an extra charge. This chair is available in 11 standard and 6 optional colors

Quickie Gp Swing-Away

The Quickie GP Swing-away is a lightweight adult manual wheelchair for sport and daily use. FRAME: One-piece rigid frame. The standard frame is available in 14- or 16-inch widths; 12-, 13-, 17-, 18-, 19-, and 20-inch widths are available at an extra charge. This chair is available in 11 standard and 3 optional colors with black chair parts. Rear anti-tip tubes are optional. SEAT: The seat is .5-inch narrower than the frame. A 14- or 16-inch deep seat is standard. Optional 15-, 17-, or 18-inch

Quickie Lx

The Quickie LX is an adult lightweight wheelchair designed for use by people with mobility disabilities. FRAME: Folding frame in a choice of eleven standard colors and three optional colors. The standard frame is available in a choice of 14-, 16-, or 18-inch widths; optional 12-, 13-, 15-, 17-, or 19-inch wide frames are available. Front or rear anti-tips are optional. SEAT: Standard seat depths are 14 or 16 inches; optional depths are 12, 13, 15, 17, or 18 inches. The seat width is .5 inch narr

Quickie Lxi

The Quickie LXI is an adult lightweight wheelchair designed for use by people with mobility disabilities. FRAME: Folding frame in a choice of eleven standard colors and three optional colors. The standard frame is available in a choice of 14-, 16-, or 18-inch widths; optional 12-, 13-, 15-, 17-,or 19-inch wide frames are available. Front or rear anti-tips are optional. SEAT: Standard seat depths are 14 or 16 inches; optional depths are 12, 13, 15, 17, or 18 inches. The seat width is .5 inch narr

Quickie M6 Bariatric Wheelchair

The Quickie M6 is a bariatric folding adult wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 26 x 20 inches. The frame is high- strength steel with interchangeable frame components that allow the chair to be adjusted for the rider’s changing needs. This chair is available in 18 different colors. SEAT (LxW): 18 to 22 x 22 to 30 inches. The floor-to-seat height is 17 inches. CASTERS: 5 to 8 x 2 inch front casters. WHEELS: 24-inch rear wheels

Quickie Recliner

The Quickie Recliner is an adult or child manual drive wheelchair with reclining backrest. FRAME: Folding aluminum frame available in 11 standard and 3 custom colors. Frame widths available in 14 to 20 inches in 1-inch increments. The chair is 12.5 inches wide folded. The frame is available in kids, regular, and long configurations. Anti-tip tubes are included. SEAT: The reclining back is 24 inches high, includes a 10-inch headrest extension, and has infinite positioning capability within a 70-d

Quickie Revolution

The Quickie Revolution is a lighweight sports wheelchair designed for daily or sports use by adults. FRAME: Alternative compact folding 75-degree front frame. The frame is available in 14 to 20 inch widths and is offered in a choice of 11 standard and 3 optional colors with black chair parts. Anti-tip tubes are optional. SEAT: The seat is available in depths ranging from 14 to 18 inches in one-inch increments. See widths are .5 inch narrower than the frame width. A folding, height-adjustable ba

Quickie T45

The Quickie T45 is an adult manual tilt-in-space wheelchair designed for use by people who need to change positions without leaving the wheelchair. FRAME: The frame is available in regular and long configurations, and frame widths range from 14 to 20 inches in 1-inch increments. Rear anti-tip tubes are standard. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in 15- to 17-inch depths, in 1-inch increments on the regular frame and in 18- to 2

Quickie Ti All Court

The Quickie Ti All Court is a sports wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Titanium frame with a center-of-gravity adjustment range of 3.5 inches and a lightweight single-wing bumper. This chair also features a fifth wheel anti-tip brace. An optional stand-up bumper is available. SEAT (LxW): 10 to 20 x 12 to 20 inches. The seat is outfitted with a ratchet-style positioning belt featuring two sets of locking ratchet-clamps. An optional

Rehab Tnt

The Rehab TNT is a heavy-duty adult wheelchair designed for use by adults with mobility disabilities. FRAME: The heavy-duty frame is made of steel aircraft alloy and breaks down into two lightweight pieces for transport. The standard frame is available in a choice of 16, 17, 18, 19, or 20 inches wide. The frame includes rear anti-tips and push handles and is available in a choice of 10 standard colors; custom colors are available at an extra charge. Options include custom widths, height-adjustab

Renegade All Terrain Wheelchair

The Renegade All Terrain Wheelchair is an all-terrain lever-drive wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This chair is available in standard, hunting, and winter models. The hunting model includes a gun rack/rest, mobile blind, and fishing pole holder. The winter model includes snow chains and front skis that are interchangeable with the front casters. FRAME (LxW): The 1.25-inch aluminum frame with left and right front and rear accessory rec

Revolution Wheelchair

---- PROTOTYPE --------- PURPOSE: The Revolution is a backless wheelchair prototype that offers a user easier transfer in and out. Designed for paraplegics with lower spinal cord injuries and core muscle control, the concept allows users to enter the wheelchair by sliding forward or exit by sliding up and back, motions that are easy to perform in comparison to traditional entry/exit. The user is securely positioned in an active kneeling position, which increases circulation and muscle activatio

Rgk Basketball Wheelchairs: Performance, Quattro, & Interceptor

RGK Basketball Wheelchairs are sport wheelchairs designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury. Three models are available. The Interceptor has a single component monoframe with an integral camber bar and footrest, the Quattro has a two component frame with a camber bar, and the Performance has a three component frame with a camber bar and a footrest.

Rgk Hi Lite

RGK Hi Lite is an adult manual wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury. A tool kit is included. FRAME: Chrome molly or titanium frame in a variety of colors. An adjustable camber bar and frame protectors are standard. Special finishes, anti-tips, push handles, sideguards are optional. SEAT: Ergonomic seating and a folding backrest are available. UPHOLSTERY:Adjustable upholstery is standard; leather upholstery i

Rgk Tennis Wheelchairs: Grand Slam 1, Grand Slam 2, & Grand Slam 3

RGK Tennis Wheelchairs, models Grand Slam 1, Grand Slam 2, and Grand Slam 3, are sport wheelchairs designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury. A tool kit is included with these chairs. FRAME: Chrome moly or titanium frame in an open or closed design. Features include an integrated or variable position camber bar and a choice of integrated or quick- release anti-tips. Side guards and special frame finishes are optional. UPHOLS

Ride-Lite 9000 Series

Manual drive adult wheelchair. 4 frame options. Adult model offers 14 to 18 inch seat width; 16, 17 or 18 inch seat depth; and 14 to 18 inch adjustable height back. Tall model offers a 21 3/4 inch seat height; 16 or 18 inch seat width; 18, 19 or 20 inch seat depth; and a 16 to 20 inch adjustable height backrest. Hemi model features a 15 1/2 or 17 1/2 inch seat height; 16, 18 or 20 inch seat width; and 16, 17 or 18 inch seat depth. Large model offers a 20 or 22 inch seat width; and a 16, 17 or 18

Rochair

The RoChair is a lever drive wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. It combines rowing-style propulsion with bicycle-style steering. To propel the chair, the user pushes forward and pulls back in a rowing motion on the front-and-center mounted handlebar. To steer, the user turns the handlebar in the desired direction. The RoChair features 8-speed hub gear with grip shift and internal gearing and it has a low center of grav

Rogue And Rogue Xp

The Rogue and Rogue XP are lightweight adult wheelchairs designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The Rogue and Rogue XP have an aluminum frame made of ultra-stiff 1.375-inch tubing to help dampen vibration and enhance responsiveness. The frame features infinite center of gravity (CG) adjustment over a 6-inch range forward of the backplate, and it has a locking fold-down back with an integrated locking mechanism fo

Rogue Ttl And Rogue Ttl Xp

The Rogue TTL and Rogue TTL XP are lightweight adult wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The Rogue TTL and Rogue TTL XP have an aluminum frame made of ultra-stiff 1.375-inch tubing to help dampen vibration and enhance responsiveness. The frame features infinite center of gravity (CG) adjustment over a 6-inch range forward of the backplate, and it has a locking fold-down back with an integrated locki

Rolls 2000 Lt Series

Adult manual drive wheelchair. Folding aluminum frame. Epoxy coated finish. Vinyl upholstery. 16 or 18 inch seat width. 16 inch seat depth. 18 or 20 inch seat height. Back height 14, 16 or 18 inches. 24 inch mag style rear wheels with solid or pneumatic tires. 8 inch front casters with solid, pneumatic or semi-pneumatic tires. Fixed or adjustable height armrests, full or desk length. Swing-away removable footrests. Optional elevating footrests. Wheel locks. Weight without footrests, 27 to 30 pou

Rolls 4000 Series

The Rolls 4000 Series is an adult wheelchair. FRAME: Chrome plated / carbon steel reinforced frame; folding; rear anti-tippers are optional; 22.5 to 29.5 inches (overall width - open); 11.5 to 15.5 inches (overall width - closed); available in standard, wide, transport and recliner models. SEAT: 16 to 22 inches (width); 16 or 17 inches (depth); 20 inches (height); 16 or 33 inches (back height); solid folding seat is optional. ARMRESTS: Removable and swingback. BRAKES: Manual. WHEELS: Composite,

Rollz 2-In-1 Transporter

This Rollz 2-in-1 Transporter is designed for individuals who find it difficult to walk but can walk with the proper walking aid. This 2-in-1 transported is a walker and a wheelchair. The handles turn around to where they are supposed to be for an aid whom pushes the wheelchair. The handles turn back around to where they are supposed to be for using this product as a walker. It crosses doorsteps and curbs easily. Folds up easily to pack in the trunk or closet. Front wheels swivel 360 degrees. Fo

Roughrider

The RoughRider is a heavy-duty manual wheelchair designed to for indoor and outdoor use by people with mobility or lower extremity disabilities, or spinal cord injury. Originially designed for use in developing countries, the RoughRider is designed to handle rugged terrain. uneven pavement and some obstacles.

Seeker

The Seeker is a child's or adult manual wheelchair designed for indoor or outdoor use by individuals with mobility disabilities. This all-terrain chair can be used in the water, in mud, in snow, in sand, and in grass. FRAME: Folding lightweight rotationally molded plastic chair in teal. The chair is available in a choice of 12-, 14-, 16-, 18-, or 20-inch widths. SEAT: Adjustable backrest with multi-grip handles. A seatbelt is optional. UPHOLSTERY: Cordura nylon seat and back. ARMRESTS: Removable

Sentra Dual Axle

The Sentra Dual Axle is an adult manual wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Carbon steel frame with double-coated chrome finish. SEAT: 16- or 18-inch width. Backrest comes with carry pocket. UPHOLSTERY: Heavy gauge black naugahyde upholstery. ARMRESTS: Padded armrests, with choice of fixed, removable, or removable/adjustable-height full- or desk-length arms. The arms are interchangeable with most Invac

Sentra Ec

Sentra EC is an adult manual wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Carbon steel frame with double-coated chrome finish. SEAT: 16- or 18-inch width. UPHOLSTERY: Double embossed blue vinyl upholstery. ARMRESTS: Padded armrests with choice of fixed or removable full- or desk-length arms. CASTERS: Optional Hemi spacing front riggings. WHEELS: Urethane tires mounted on composite wheel with sealed precision be

Sentra Full Reclining Wheelchair

The Sentra Full Reclining Wheelchair is a reclining manual wheelchair designed for use by individuals with lower extremity, mobility, or severe physical disabilities or spinal cord injury. FRAME: Carbon steel frame with double-coated chrome finish, hydraulic reclining mechanism, anti-tippers, headrest extension, and dual axle to allow transition of the seat to hemi-level. SEAT: 16-, 18-, or 20-inch width with full reclining back. UPHOLSTERY: Heavy gauge black naugahyde upholstery. ARMRESTS: Padd

Sentra Heavy-Duty

Sentra Heavy Duty is an adult manual wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Carbon steel frame with triple-coated chrome finish and reinforced side frame, dual cross bars, and reinforced steel gussetts at all weight-bearing points. A dual axle allows the seat to be lowered to hemi height. SEAT: 20-, 22-, or 24-inch width. Carry pocket in backrest. UPHOLSTERY: Heavy-gauge black naugahyde upholstery. ARMRES

Sentra Plus

Sentra Plus is an adult manual wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Carbon steel frame with double-coated chrome finish. SEAT: 16- or 18-inch width. Backrest with carry pocket. Dual axle provides transition of seat to hemi-level. UPHOLSTERY: Double-embossed black vinyl upholstery. ARMRESTS: Padded armrests with choice of removeable or removeable/adjustable-height full- or desk-length arms. CASTERS: Fron

Shadow One & Shadow Dt

The Shadow One and Shadow DT are manual sport wheelchairs. FRAME: Chrome-moly Shadow One 72-degree frame or Shadow One DT 72- or 85-degree frame. The frames are available in 11 standard colors, 6 optional colors, and custom or special effect finishes. The frames are offered for sports/daily use in standard, large standard, small standard and for sports use in steep, tall, and ultra-tall. Custom modifications are available. Anti-tips with wheels are optional. SEAT: Seat widths range from 12 to 2

Silhouette Wheelchair, The

The Silhouette Wheelchair is a manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding chrome frame with push handles. SEAT (W x D): The padded seat is 18 x 16 inches. UPHOLSTERY: Embossed vinyl. ARMRESTS: Detachable desk-length armrests with pads. BRAKES: Push-to-lock wheel locks. CASTERS: 8-inch mag casters with solid tires. WHEELS 24-inch mag rear wheels with handrims. FOOTRESTS: Flip-up footplates. WEIGHT: 50 pounds.

Soto Wheelchair

The Soto Wheelchair is a fully collapsible and portable manual wheelchair. Designed by a paraplegic architect in France, this product was assisted by Veterans Affairs based on its unique design. The entire unit dismantles to be carriered in a circular bag measuring only 26 inches in diameter and 5 inches wide, allowing it to be stored in the cabin of an airplane or the trunk of a car. The chair is make of lightweight, resistant and rustproof materials. The seat is approximately 20 inches from th

Sportlite 4000 & Active Ultra-Light

The Sportlite 4000, Active Ultra-Light is an adult manual, folding wheelchair designed for active individuals. FRAME: The frame is constructed of fully welded 7/8 inch stainless steel featuring an x-brace. Precision bearing on all wheels and caster forks, and heavy duty 1/2 inch axle are standard. Anti-tippers are included, they are adjustable and may be removed when not in use. SEAT: Standard seat sizes: seat width 18 inches, seat depth 16 inches, seat height 19 inches and backrest height 16.5

Star 500 Series

The Star 500 Series are manual wheelchairs designed for use by individuals with mobility disabilities. Models 506, 508, 514, 516, and 518 are standard manual wheelchairs. Models 520, 522, and 524 are heavy duty manual wheelchairs. Models 616 and 618 are recliners. FRAME: Steel. Anti-tips are available. SEAT: Seat widths are available in 14 inches (model 514); 16 inches (models 506, 516, and 616); 18 inches (models 508, 518, and 618); 20 inches (model 520); 22 inches (model 522); and 24 inches (

Stellar

The Stellar is a manual, adjustable-tilt wheelchair designed for use by individuals with mobility disabilities. The chair offers a tilt of up to 45 degrees and hand or foot propulsion both in and out of tilt. The chair's low knee height can be maintained even when tilted. The chair is available with a standard or heavy-duty (HD) frame. FRAME (LxW): 30 to 37 without front rigging x 21.5, 25.5, 29, 30.5, 33, or 34.5 inches. Adjustable frame with dynamic tilt from zero to 45 degrees. Optional heavy

Stellato

The Stellato is an adult lightweight folding manual wheelchair designed for use by individuals with mobility, lower extremity, neurological, or severe physical disabilities or spinal cord injury. FRAME: The lightweight frame has a swing-away front end and elliptical heavy duty crossbrace tubing. The overall width ranges from 22 to 28 inches. A small frame and a large frame are available. The seat-to-floor height for the small frame ranges from 13.25 to 18 inches, and from 15.5 to 19 inches for t

Storm Series Tdx3

The Storm Series TDX 3 is a powered wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 34 to 41 (depending on seating system) x 35.25 x 25 (26.5 with joystick) inches. Includes Stability Lock and SureStep suspension configured for obstacles up to 3 inches high. Finish options include Basic Colors (Deep Purple, Cobalt Blue, Anthracite, Wet Black, Red, Silver Vein, Lavender, Wet Black with Twilight Sparkle,

Superstand Standing Wheelchair (Model Ss-1)

The SuperStand Standing Wheelchair, model SS-1, is a manual stand up wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. This is an adult manual wheelchair with a manual standing mechanism. The user operates the standing mechanism with a vinyl coated lever and is assisted to the standing position by two gas cylinders. FRAME (HxL sitting with leg rest): 35 x 41 inches. Length without leg rests is 29 inches. It has a rigid

Swedish Design Volaris Rollator

The Swedish design Volaris rollator is designed for individuals who need assistance when walking. It folds up easily and the handles are adjustable in height with the pull of a knob. The large 8 inch wheels help to reduce walking time to places and promotes a natural walking pace. It is made of lightweight aluminum and "Acrylonitrile butadiene styrene"(ABS)plastic.

Tennis Elite

The Tennis Elite is a sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. Magnesium alloy powder coat frame with 1.375-inch tubing. Aluminum side guards are standard. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest is welded and non-folding. UPHOLSTERY: Laminated carbon fiber sailcloth adjustable by tension cord. CASTERS:

Terratrek

The TerraTrek is a child's or adult manual wheelchair designed for indoor or outdoor use by individuals with mobility disabilities. This all-terrain chair can be used in mud, snow, sand, and grass. FRAME: The lightweight rigid frame is made of chromoly steel and is available in red, black, yellow, blue, and hunter green. Custom colors are also available. .SEAT: The seat has a front seat height of 21 inches and a rear seat height of 16 to 19 inches. It features clothing guards and an adjustable

Tiracer

The TiRacer is a three-wheeled racing wheelchair. FRAME: Handmade seamless titanium frame with a bead-blast finish. An optional polished titanium finish is available. The titanium fork features a choice of high- or low-mount steering. FRONT WHEEL: The standard 28-spoke wheel features a RC percision-machined straight-pull hub and a black anodized rim. An optional Corima 10-spoke wheel is available. REAR WHEELS: The standard spoked rear wheels feature a black anodized RC hub and a choice of 14- to

Tisport X

The TiSport X is a sport wheelchair designed for everyday use. FRAME: Lightweight, folding titanium frame. A one-inch tapered front end with a choice of three front frame angles is standard. SEAT: An adjustable seat back is standard. ARMRESTS: Swing-away armrests are standard. BRAKES: A fully-adjustable high mount wheel lock is standard. An optional Unilock enables users to select push- or pull-to-lock. CASTERS: Six-inch front casters are standard. FOOTRESTS: Fixed footrests are standard. A one-

Tisport Xc

The TiSport XC is a custom-designed sport wheelchair designed for everyday use. FRAME: Lightweight, non-adjustable custom folding titanium frame. This custom frame enables users to select the front frame angle. SEAT: The seat-to-floor dimensions are selected by the customer. WHEELS: The consumer selects the permanent position of the axle.WEIGHT: 17 pounds.

Titanium Wheelchair

The Titanium Wheelchair is a lightweight manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Rigid welded titanium frame with 6-, 9-, 12-, or 15-degree camber. The standard frame color is titanium; Prizmatique colors are available upon request. Impact guards and fabric clothes protectors are optional. Custom modifications are available. SEAT (LxW): 14 to 18 x 13 to 18 inches. The floor to seat pan height is 21 to 24 inches, and the back heig

Top End Crossfire All Terrain Rigid Wheelchair

The Top End Crossfire All Terrain Rigid Wheelchair is an all-terrain sport wheelchair designed for use by adults with mobility or lower extremity disabilities or spinal cord injury. FRAME: Custom built rigid aluminum ultra-lightweight open frame or cantilever design. The center of gravity is available in an active position or an amputee position. The frame is available in a choice of wet black, black prism, copper penny, cosmic blue, electric blue, electric red, electric green, emerald green, fr

Top End Paul Schulte Signature Titanium Bb Wheelchair

The Top End Paul Schulte Signature Titanium BB is a basketball wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: 6061 T6 aluminum frame with welded-in-place offensive wing/bumper, fixed swivel anti-tip bar, and custom axle position, wheelbase, and center of gravity. The front frame angle is 80, 90, or 100 degrees. SEAT (LxW): 14 to 18 x 12 to 19 inches. Tapered seat width is optional. The floor- to-seat height is 16 to 21 inches in front and 13 t

Top End Terminator Everyday Wheelchair

The Top End Terminator Everyday Wheelchair is a lightweight manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Custom-built rigid lightweight frame with 1-inch diameter chrome-moly tubing. Custom dimensions include position of front caster housings, adjustable center of gravity, front and rear seat height, and front frame angle. Options include curved or square rear frame, tapered or V front frame, rear suspension system, Frog Legs suspensi

Top End Terminator Titanium Wheelchair

The Top End-Terminator Titanium Wheelchair is a heavy-duty manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Custom-built rigid lightweight frame with 1-inch diameter chrome-moly tubing. Custom dimensions include position of front caster housings, adjustable center of gravity, front and rear seat height and front frame angle. Options include curved or square rear frame, tapered or V front frame, a rear suspension system, anti-tip bars, and

Top End X-Terminator Qr Sports Wheelchair

The Top End X-Terminator QR Sports Wheelchair is a sports wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This chair is specifically designed for playing quad rugby. FRAME: The frame is custom 4130 chrome moly steel. It features an adjustable center of gravity, an offensive wing in front of or behind the caster housings, fixed or folding aluminum side guards, front and rear frame protectors, a swivel QR anti-tip bar and detachable push handles. SEAT:

Traditional Wheelchair With Footrests (Model 37311)

The Traditional Wheelchair with Footrests, model 37311, is a manual adult wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Folding frame with push handles, triple chrome-plated carbon steel side panels, and telescoping seat rail support tubes under the chair. SEAT: 18 inches wide with a heavy-duty inner liner. ARMRESTS: Fixed armrests. FOOTRESTS: Lightweight composite footplates. CAPACITY: 250 pounds. WEIGHT: 40 pounds. WARRANTY: Frame and cross

Transport Wheelchair

The Transport Wheelchair is designed for use by individuals with mobility disabilities. FRAME: This lightweight, attendant-propelled wheelchair is 19 inches wide open, folds for transport and storage, and includes push handles. ARMRESTS: Fixed padded armrests. BRAKES: Toggle foot-operated brakes on the rear casters. CASTERS: Four 8-inch mag caster wheels. FOOTRESTS: Removable footrests with flip-up footplates. CAPACITY: 250 pounds. WEIGHT: 27 pounds.

Travelabout 2811, Compact Lightweight

The 2811 TravelAbout is designed for all-purpose residential or institutional use by adults. FRAME: The frame is lightweight, when folded the wheelchair is 10 inches wide. The frame is constructed of heavy square steel x-brace that permits use by obese individuals. The Travel About frame is 20 inches wide. SEAT: Seat-to-floor height is 18 inches, seat width 18 inches, back height 15 inches. UPHOLSTERY: The upholstery is embossed with textilene inner liner, brown is the standard color. However, 1

Traveler Se

The Traveler SE is an adult manual folding wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 31.5 x (24.5, 26.5 or 28.5) x 35.5 inches. Steel frame with saddle-joint tubular construction with hammer-tone paint. The width is 12 inches when folded. SEAT (WxD): (16, 18 or 20) x 16 inches. The seat height adjusts to 18 or 20 inches. The seat back is 15.5 inches high. UPHOLSTERY: Black vinyl. ARMRESTS: Choice

Tsunami Al

The Tsunami AL is a lightweight adult wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of 6061-T6 aircraft aluminum. It is available in two optional versions – Heavy Duty and Transit System. The frame is available with no rear adjustment or 0.5-inch rear adjustment, and optional versions of the frame allow for adjustments of 1, 2 and 3 inches. The frame can be ordered with the center of

Tsunami Alx

The Tsunami ALX is a lightweight adult wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is made of 7000 series tubing. The frame features center of gravity (CG) adjustment over a 1.75-inch range for amputee positions and 2.7-inch range for standard positions, both in 0.25-inch increments. The frame is also available in a Heavy Duty version. Various frame colors and finishes are available, and rear anti

Tuffy Deluxe 867 (Models 867, 867E, 867N, & 867Ne)

The Tuffy Deluxe 867 is a folding manual wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury, as well as amputees. In addition to the standard 867 model, this wheelchair comes in narrow (models 867N and 867NE) versions. FRAME (HxLxW): 36 x 41 or 43 x 22.5 or 24.5 inches. The folded dimensions (LxW) are 31 x 10.5 inches. This chair has a triple chrome-plated steel folding frame with stainless steel side panels. Anti-tippers and

Tuffy Deluxe 887 (Models 887, 887E, 887N, 887Ne)

The Tuffy Deluxe 887 is a folding adult manual wheelchair designed for use by shorter adults with lower extremity, mobility or neurological disabilities or spinal cord injury, as well as amputees. In addition to the standard 887 model, this wheelchair comes in narrow (models 887N and 887NE) versions. FRAME (HxLxW): 34 x 41 or 43 x 22.5 or 24.5 inches. Triple chrome plated steel folding frame with stainless steel side panels. The folded dimensions (LxW) are 30.5 x 10.5 inches. Anti-tippers and an

Tuffy Deluxe Standard Light 877 (Models 877, 877E, 877N, 877Ne, 877W, & 877We)

The Tuffy Deluxe Standard Light 877 is a folding adult manual wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities or spinal cord injury, as well as amputees. In addition to the standard 877 model, this wheelchair comes in narrow (models 877N and 877NE) and wide (models 877W and 877WE) versions. FRAME (HxLxW): 36 x 41 or 43 x 24, 26 or 28 inches. The folded dimensions (LxW) are 31 x 11.5 inches. The chrome-plated folding frame has composite side

Tuffy Deluxe Wide Recliner 497 (Models 497E & 497Xe)

The Tuffy Deluxe Wide Recliner 497 is a manual reclining wheelchair with a manual reclining back designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 497E model, this wheelchair comes in a wide (XE) version. FRAME (HxLxW): 42 (with seat back upright) x 50.5 x 30 or 32 inches. Folded dimensions (LxW) are 37 x 12 inches. The folding frame comes standard with double cross bar construction and reinforcement w

Tuffy Extra Wide 377 (Models 377, 377A, 377Ae, 377E, 377W, 377We, 377X, 377Xe)

The Tuffy Extra Wide 377 is a heavy duty, folding manual wheelchair designed for use by large adults with lower extremity, mobility or neurological disabilities or spinal cord injury. FRAME (HxLxW): 37.75 x 42 or 44 x 26, 28, 30 or 32 inches. This chair has triple chrome plated steel folding frame with stainless steel side panels. Double cross bar construction and reinforcement welds that strengthen design are standard. The folded dimensions (LxW) are 32 x 12 inches. Anti-tippers and an anti-fol

Tuffy Hemi 897 (Models 897, 897E, 897N, 897Ne, 897W, & 897We)

The Tuffy Hemi 897 is a heavy duty, folding manual wheelchair designed for use by short adults with lower extremity, mobility or neurological disabilities or spinal cord injury, as well as amputees and those who propel a wheelchair by foot. In addition to the standard 897 model, this wheelchair comes in narrow (models 897N and 897NE) and wide (models 897W and 897WE) versions. FRAME (HxLxW): 34 x 41 or 43 x 24, 26, or 28 inches. The folded dimensions (LxW) are 30 x 11.5 inches. The chrome-plated,

Tuffy Recliner 477 (Models 477E, 477Ne, & 477We)

The Tuffy Recliner 477 is a manual, heavy-duty, reclining wheelchair with a manual reclining back designed for use by large adults with lower extremity, mobility, severe physical, or neurological disabilities or spinal cord injury. In addition to the standard 477E model, this wheelchair comes in narrow (NE) and wide (WE) versions. FRAME (HxLxW): 42 (with seat back upright) x 48 x 24, 26 or 28 inches. The triple chrome-plated frame folds; the folded dimensions (LxW) are 34 x 12 inches. Anti-tippe

Tuffy Super Extra Wide 397 (Models 397, 397E, 397X, 397Xe, 397Y, 397Ye, 397Z, 397Ze, 397L, & 397Le)

The Tuffy Super Extra Wide 397 is a heavy-duty, folding manual wheelchair designed for use by large adults with lower extremity, mobility or neurological disabilities or spinal cord injury. FRAME (HxLxW): 36 x 44 or 46 x 30, 32, 34, or 38 inches. The folded dimensions (LxW) are 34 x 12 inches. The triple chrome plated steel folding frame has stainless steel side panels and double cross bar construction with reinforcement welds to strengthen the design. Anti-tippers and an anti-folding device are

Twin Wheelchair

The Twin Wheelchair is a lightweight adult manual wheelchair designed for use by individuals with mobility disabilities. FRAME: Lightweight folding aluminum and steel tube frame with double cross braces. This chair has one-piece die-cast aluminum side frames. Anti-tips are optional. SEAT: Available in standard, hemi, or super-hemi in a choice of 14, 16, 18, or 20 inches wide. The seat is angle-adjustable and the front and rear seat heights adjust from 15 to 19 inches. The backrest is available i

Venture 227 (Models 227 & 227E)

The Venture 227 is a folding manual adult wheelchair designed for use by adults with lower extremity, mobility or neurological disabilities or spinal cord injury. FRAME (HxLxW): 36 x 41 or 44.5 x 24.5 inches. This chair has a moisture-resistant powder-coated frame with high-impact composite side panels. The folded dimensions (LxW) are 31 x 10.5 inches. Anti-tippers and an anti-folding device are optional. SEAT (LxWxH): 16 x 18 x 20 inches. A non-removable 16.75-inch high back is standard. A seat

Venture Deluxe 267 (Model 267, 267E, 267N, & 267Ne)

The Venture Deluxe 267 is a folding manual wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury, as well as amputees. In addition to the standard 267 model, this wheelchair comes in a narrow (models 267N and 267NE) version. FRAME (HxLxW): 36 x 41 or 43 x 22.5 or 24.5 inches. The folded dimensions (LxW) are 31 x 10.5 inches. The folding triple chrome plated frame has stainless steel side panels. Anti-tippers and an anti-folding d

Venture Deluxe 277 (Model 277, 277E, 277N, 277Ne, 277W, & 277We)

The Venture Deluxe 277 is a folding manual wheelchair designed for use by adults with lower extremity, mobility or neurological disabilities or spinal cord injury, as well as amputees. In addition to the standard 277 model, this wheelchair comes in narrow (models 277N and 277NE) and wide (models 277W and 277WE) versions. FRAME (HxLxW): 36 x 41 or 43 x 24, 26 or 28 inches. The folded dimensions (LxW) are 31 x 11.5 inches. The triple chrome plated frame has stainless steel side panels. Anti-tipper

Venture Dual Axle 287 (Models 287 & 287E)

The Venture Dual Axle 287 is a folding adult manual wheelchair designed for use by adults with lower extremity, mobility or neurological disabilities or spinal cord injury, as well as amputees. The dual axle position and adjustable height caster wheel housing allow the chair to be converted to hemi height. FRAME (HxLxW): 34 to 36 x 41 or 43 x 26 inches. The folded dimensions (LxW) are 31 x 11.5 inches. The triple chrome plated frame has composite side panels. Anti-tippers and an anti-folding dev

Venture Economy 247 (Models 247 & 247E)

The Venture Economy 247 is a folding adult manual wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 36 x 41 or 43 x 24.5 inches. The folded dimensions (LxW) are 31 x 10.5 inches. Triple chrome plated frame with high impact composite side panels. Anti-tippers and an anti-folding device are optional. SEAT (LxWxH): 16 x 18 x 20 inches. A non-removable 16.75-inch high back is standard. A seatbelt and headrest exte

Venture Economy 257 (Model 257)

The Venture Economy 257 is a folding manual wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 36 x 41 x 24.5 inches. The folded dimensions (LxW) are 31 x 10.5 inches. The triple chrome plated frame has high impact composite side panels. Anti-tippers and an anti-folding device are optional. SEAT (LxWxH): 16 x 18 x 20 inches. A non-removable 16.75-inch high back is standard. A seatbelt and headrest extension are

Venture Hemi Light 687 (Model 687, 687E, 687N, & 687Ne)

The Venture Hemi Light 687 is a lightweight folding manual hemi wheelchair designed for use by adults with lower extremity, mobility or neurological disabilities or spinal cord injury, as well as amputees and those who propel a wheelchair by foot. In addition to the standard 687 model, this wheelchair comes in a narrow (models 687N and 687NE) version. FRAME (HxLxW): 36 x 41 or 43 x 22.5 or 24.5) inches. The chrome-plated frame has composite side panels. The folded dimensions (LxW) are 31 x 10.5

Venture Hemi Light 697 (Model 697, 697E, 697N, 697Ne, 697W, 697We)

The Venture Hemi Light 697 is a lightweight folding manual hemi wheelchair designed for use by adults with lower extremity, mobility or neurological disabilities or spinal cord injury, as well as amputees. In addition to the standard 697 model, this wheelchair comes in narrow (697N and 697NE) and wide (697W and 697WE) versions. FRAME (HxLxW): 36 x 41 or 43 x 22.5, 24.5, or 26.5 inches. The folded dimensions (LxW) are 31 x 11.5 inches. The chrome-plated frame has composite side panels. Anti-tippe

Venture Light 677 (Model 677, 677E, 677N, 677Ne, 677W, 677We)

The Venture Light 677 is a lightweight folding manual wheelchair designed for use by adults with lower extremity, mobility or neurological disabilities or spinal cord injury, as well as amputees. In addition to the standard 677 model, this wheelchair comes in narrow (models 677N and 677NE) and wide (models 677W and 677WE) versions. FRAME (HxLxW): 36 x 41 or 43 x 22.5, 24.5, or 26.5 inches. The folded dimensions (LxW) are 31 x 11.5 inches. The chrome-plated frame has composite side panels. Anti-t

Victory Wheelchair

The Victory Wheelchair is a lightweight manual wheelchair designed for use by children or adults with lower extremity or mobility disabilities or spinal cord injury. FRAME: Folding aluminum alloy frame made with high pressure castings and with no welded joints. Other features include modular design, double 'X' cross brace, ABS plastic side plates, and swing out anti-tips. Options include shopping basket or school tray. SEAT (LxW): 10 x 10, 13.75 x 14, 15.75 x 15, 16.5 x 16, 16.7 x 17, 17.7 x 18,

Viper

The Viper is a lightweight wheelchair designed for use by children or adults with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Carbon steel frame with double-coated chrome finish. Dual axle allows transition of seat to hemi-level. SEAT: 12-, 14-, 16-, 18-, or 20-inch width. UPHOLSTERY: Heavy gauge flame-retardant black nylon upholstery. ARMRESTS: Flip back arms in full or desk style; 16- to 20-inch wide seats are also available with flip back/adjustable-heig

Viper Plus

Viper Plus is a lightweight wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Carbon steel frame with double-coated chrome finish and adjustable anti-tipper with wheels. SEAT: 16, 18, 20, or 22 inches wide. The back angle adjusts from 5 to 20 degrees, and the back height adjusts from 15 to 21 inches in two-inch increments. UPHOLSTERY: Heavy-gauge flame-retardant black nylon upholstery. ARMRESTS: Adjustable-height, f

Viper Plus Reclining Wheelchair

The Viper Plus Reclining Wheelchair is a lightweight reclining wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Carbon steel frame with double-coated chrome finish and hydraulic reclining mechanism. SEAT: 16, 18, or 20 inches wide. UPHOLSTERY: Heavy- gauge flame-retardant black nylon upholstery. ARMRESTS: Padded nylon armrests and flip-back arms. Choice of full- or desk- style with or without height adjustability.

Walker Wheelchair Combination

The Walker Wheelchair Combination is a combination adult wheelchair and nonfolding wheeled walker with seat designed for use by individuals with mobility disabilities. This unit features a tubular plastic frame that surrounds the user on all sides. The front gate opens for entry and access. Front double caster wheels enable the unit to be used as a walker and the seat and rear wheelchair wheels enable the user to sit and propell the unit like a wheelchair as needed. A covered backrest provides s

Walter: An Alternating Center Of Gravity Wheelchair

---- PROTOTYPE --------- PURPOSE: To create a prototype wheelchair with an adjustable center of gravity for wheelchair users in developing countries. The Walter project was initiated to develop an adult active manual wheelchair compatible with the social, physical, and economic conditions of semi-urban environments in developing countries. The project was characterized by a four-step process: (1) initial research in Gothenburg (Sweden); (2) design and construction of a functional prototype with

Wheelcare

---- PROTOTYPE --------- PURPOSE: To design a prototype wheelchair design for individuals with lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair that allows for the comfort of the user and the caregiver pushing the wheelchair. The WheelCare concept features advanced ergonomics that make it just as comfortable for the seated person as it is for the caregiver. This manual wheelchair features a redesigned cushioned handle, height-adjustable footrests; fo

Wheelchair Accessable 4-Seater Picnic Table

This product is designed for persons in wheelchairs. It a 4-seater picnic table has room for a wheelchair to also be seated at the table. It is made from high-pressure wood from sustainsable sources – FSC Certified.

Winnie Wheelchair

The Winnie Wheelchair is a manual adult wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Black powder-coated steel frame. UPHOLSTERY: Embossed black vinyl upholstery. ARMRESTS: Plastic arms. CASTERS: Hanger bracket to accommodate Hemi spacing rigging. WHEELS: Urethane tires mounted on composite wheel with sealed precision bearings and composite hand-rims. FOOTRESTS: Plastic calf pads and footplates. WARRANTY: 3-yea

Wizz-Ard Large Frame Wheelchair (Models Wz2018, Wz2218 & Wz2418)

The WIZZ-ard Large Frame Wheelchair is a manual wheelchair designed for use by obese adults with mobility disabilities. FRAME (WxDxH): Model WZ2018 is 28.5 x 42 x 36 inches; model WZ2218 is 30.5 x 42 x 36 inches; and, model WZ2418 is 32.5 x 42 x 36 inches. This chair features a black folding stainless steel frame with push handles, a single reinforced crossbrace, 4-point telescoping at each corner to strengthen the design, and a baked urethane finish to ensure chip, scratch, and fade resistance.

World Chair

Adult manual wheelchair. Folding steel frame. 16 or 18 inch seat width. 16 inch seat depth. 16 inch back height. 24 inch mag-style wheels with solid tires. 8 inch front casters with solid tires. Fixed or removable armrests, full or desk length. Swingaway removable footrests. Optional elevating footrests. Wheel locks. Weight 39 pounds not including footrests.

X2 6500 Series

The X2 6500 Series is a manual wheelchair designed specifically for large adults. FRAME: The folding frame is constructed of hardened steel and is fully welded. The square, eleven gauge tubing for the x-brace, four telescopic adapters and two reinforcing struts allow the wheelchair to accommodate obese persons. All painted components are powder coat epoxy finishes. SEAT: The standard seat widths are 20, 22, and 24 inches. Standard seat dimensions are as follows: seat from floor - 20.5 inches, b

Xtreme Pro

The Xtreme Pro is a fully adjustable manual sports wheelchair that is designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (HxL): 14 to 21 x 18.5 to 21.5 inch rigid, rear tube assembly with fully- adjustable frame. Welded side guards and custom camber settings are built into the frame. The fame is available in more than 20 standard and custom finishes. SEAT: 14 to 18 inches wide and 12 to 16 inches deep. Folding backrest is 8 to 18 inches and can be adjusted fo

Z26

The Z26 is a lighweight wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Aluminum alloy and carbon steel frame with a powder-coated, liquid crystal (K5) iridescent blue finish. Additional features include adjustable tension back supports and anti-tippers. SEAT: 16 or 18 inches wide. CUSHION: 2-inch nylon-covered foam seat cushion. UPHOLSTERY: Heavy-gauge flame-retardant nylon upholstery. The back upholstery is remo

Parent Category: Manual Wheelchairs
 
Processing...


Driving Walking/Biking Public Transit  Get Directions