The Collar & Bridge Assembly, model 32669, is a control switch accessory for mounting hardware designed to secure wheelchair controllers to the chair. The Collar allows a full range of motion while holding controllers such as joysticks and sip-n-puff goosenecks in a stationary position relative to the user. The Bridge Assembly includes plastic spacers to position the control unit at a proper distance from the collar. Pre-drilled holes on the front of the collar enable a variety of height adj
The Extension Cord is a control switch accessory designed to allow more distance between the switch and the item being controlled. DIMENSIONS: The cord is 6 feet long.
The Grip Switch Kit is a squeeze switch accessory for individuals who have physical disabilities. It consists of colored tubular grips designed to be interchangeable with the grip on the standard Grip and Puff Switch (model 700, see separate entry). Each kit comes with 5 grips. DIMENSIONS: Approximately 4 inches in length, with varying diameters between 3/8 to 3/4 inches.
The Male 1/8 to Female 1/4 adapter and the Male 1/4 to Female 1/8 Adapter are switch adapters designed to ensure compatibility between switches and switch-adapted toys and appliance. One end features a plug and the other end is equipped with a jack.
Variety of stock and custom molded plug cordsets for use with a number of electrical products. For use with adapting control switches.
The Pocket Technician, model 662, is a control switch accessory designed to aid in determining the cause of malfunctions in switch-adapted devices. The unit tests batteries, switches, and devices. Placing an N, triple-A, double-A, C, D, or 9-volt battery in the unit will cause the meter to show the battery condition. To test a switch, the switch is plugged into the female jack; when the switch is activated and working, the unit will buzz. To test a device, the device is connected to the unit; if
The Softline Collar & Bridge Kit, model 32685, is a control switch accessory for mounting hardware designed to secure and position wheelchair controls for the user. The device includes a breastplate with a bridge assembly, including plastic spacers to help position the control unit at the proper distance from the breastplate. The kit is designed to be configured and attached in any way that best suits the user with any or all of the following included pieces: 2 trimable hook-n-loop straps, 4
The Surelock Midline Swingaway System, model 32691, is a lightweight control switch accessory for mounting hardware designed to secure and position wheelchair controls for the user. The entire system is can be mounted to either the right or left vertical bar of a wheelchair with 7/8-inch frame tubing, or it can be mounted on either the back post or armrest of a wheelchair or connected to a multimount chair with a multimount adaptor clamp. An inner extension bar and outer extension tube allow fo
The Switch Modifier, model 605, is a control switch accessory designed to enable a momentary switch to function as an on/off switch or a timed switch. When the momentary switch (not included) is connected to the unit, it can be used in the dedired mode. The unit features both quarter-inch and 1/8-inch plugs and jacks.
The Switch Mounting Kit for Tables, model SMT, and Switch Mounting Kit for Wheelchairs SMW-1, are control switch accessories for mounting switches in a variety of locations. Model SMT is designed for use on tables or table-like surface, and model SMW-1 is designed for use with wheelchairs. The Switch Mounting Kit for Tables includes a gooseneck, tilt-top switch mounts, and an adapter bracket to fasten it to tables or shelves. The Switch Mounting Kit for Wheelchairs has a tubular bracket for clam
The Switchamajig Controller is a control switch input interface that allows a person to use an Apple iPad to control remotely up to six switch ports on switch-adapted toys or appliances. The user connects the controller to the adapted item(s) using the included cables, and the Controller connects to an Apple iPad running the Switchamajig app (see separate entry) via WiFi. POWER: Requires 2 AA batteries (not included).
Adaptor Clamps are switch mounting hardware designed to secure controls to wheelchairs. All models are made of steel and coated with black baked epoxy. The TASH/Sip-N-Puff Adaptor, Model 32676, is designed to hold the TASH joystick and other controls. The unit is equipped with a metal loop which allows the electrical cord to be slipped through without removing the end plug. Model 32677, the 1555 Adaptor, is a clamp designed to hold the Invacare 1555 remote joystick by utilizing existing joystick
The Tecla Shield is a control switch input interface designed for people with fine motor control or upper extremity disabilities. The Tecla Shield allows a person to use adapted switches or the driving controls of their powered wheelchair to control remotely Android-powered, Bluetooth-enabled electronic devices. The switches or driving controls connect to the Tecla Shield using the included cables through the device's six ports. The ports include 2 3.5-millimeter mono sockets, a D-Sub 9-pin male
The Tecla Shield DOS is a control switch input interface designed for people with fine motor control or upper extremity disabilities. The system allows a person to use adapted switches or the driving controls of their powered wheelchair to control remotely an Apple iPod Touch, iPhone or iPad or an Android tablet or smartphone. The Tecla Access app (see separate entry) is required to use the Tecla Shield DOS with an Android device. The switches or driving controls connect to the system using the
The Tecla Shield for iPhone & iPad is a control switch input interface designed for people with fine motor control or upper extremity disabilities. The system allows a person to use adapted switches or the driving controls of their powered wheelchair to control remotely an Apple iPhone or iPad. The switches or driving controls connect to the system using the included cables through the device’s six ports. The ports include 2 3.5-millimeter mono sockets, a D-Sub 9-pin male connector ECU port,
The Toy Cables are control switch accessories designed to convert battery operated toys to switch operated toys. Models are available to adapt toys using double-A or C batteries or to adapt toys using D batteries. A switch is required, but not included. DIMENSIONS: The cables are six feet long.