Sensor Switches

Results: 29

Adjustable Proximity Sensor (Sensor Only)

Amdi's Adjustable Proximity Sensor is a sensor switch designed for use by individuals with upper extremity disabilities, neurological disabilities, or severe physical disabilities. This sensor switch features adjustability in sensing range from touch to over half an inch. It can be mounted behind a panel of wood, plastic, vinyl, foam, and many more materials while maintaining its sensitivity functionality. A green light indicates power and a yellow light indicates activation.

Asl Adjustable Photo-Electric Sensor With Mono Port (Model Asl209-M)

The ASL Adjustable Photo-Electric Sensor with Mono Port, model ASL209_M, is a photo-electric power wheelchair control switch designed for use by individuals with gross motor disabilities or mobility disabilities. This adjustable photo- electric switch can be used on a power wheelchair with ASL proportional driving controls, or for non-driving purposes. It requires the addition of an appropriate ASL 804 power source cable to receive power from the power wheelchair, and can be used with all power

Asl Adjustable Proximity Sensor With Mono Port (Model Asl208_M)

The ASL Adjustable Proximity Sensor with mono port, model ASL208_M, is a sensor switch designed for use by individuals with upper extremity disabilities, neurological disabilities, or severe physical disabilities. This "no touch" proximity switch has an adjustable "void space" range, which allows the switch to function when mounted under a surface up to a half-inch thick, thus allowing the proximity field to begin above the voided area (for example, the surface of a tray). This switch works with

Asl Fiber Optic Sensor With Mono Port (Model Asl202-M)

The ASL Fiber Optic Sensor with Mono Port, model ASL202_M, is a sensor switch designed for use by individuals with mobility, communication, or severe physical disabilities. This single function switch has an adjustable activation range from touch to 2.5 inches, with a round target area. This fiber optic switch can be programmed for either normally open (NO) or normally closed (NC) operation. In the NO mode, switch activation occurs when an object is detected in the adjusted range. In the NC mode

Asl Proximity Sensor With Mono Port (Model Asl204-M)

The ASL Proximity Sensor with Mono Port, model ASL204-M, is a sensor switch designed for use by individuals with upper extremity disabilities. This "no touch" switch can be used with ASL proportional driver controls with power wheelchairs or for non driving purposes such as computer control. This single function switch has an activation range of touch to half inch. Activation occurs when it senses a hand or another part of the body in the activation area. This switch is intended to be used throu

Bci Music

---- PROTOTYPE --------- PURPOSE: To create a prototype of an adapted brain-computer interface (BCI) device which allows individuals with paralysis and/or severe disabilities play music by brain power alone. Developed by Eduardo Miranda at the University of Plymouth Interdisciplinary Centre for Computer Music Research (ICCMR) in the United Kingdom, this BCI device allows individuals with neurodegenerative diseases, muscular disorders, and paralysis to participate in creating music. Miranda’s ins

Bubbles

Bubbles is a combination touch switch and motion detection switch designed for use by individuals with upper extremity disabilities. This dome-shaped switch can be used to operate any switch-adapted device and features adjustable sensitivity. The switch can be set to act as a touch-sensitive switch, activated by a light touch on the top or sides, or it can be set so that simply bringing the hand near the switch is sufficient for activation. DIMENSIONS: Three inches across.

Computer Interface For Optical Headpointer.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Optical headpointer and photodetector circuit designed to be immune to false triggering. Describes a photodetector circuit tuned to respond only to light pulsed at 90 Hertz (from a headpointer beam), ignoring shifts in ambient light level and room lighting. Circuit output feeds directly into a computer. Includes circuit diagrams for a lamp driver and a photodetector. COMMENTS: For further information contact: G L Heseltine, Science Unlimited Research F

Dipsy Switch

The Dipsy Switch is a motion sensitive switch designed for use by individuals with severe physical disabilities or spinal cord injury. This tilt-sensitive switch can be attached to the head, arm, finger or any appropriate object and can be activated by body movements such as tilting the head forward, tilting the head back, or lifting a finger. It can also be attached to objects such as a rocking chair. The switch is activated by a 30-degree tilt to limit false activation. It can also be adjusted

Electrical Switches

DO IT YOURSELF" ENTRY --- PURPOSE: Switches for use by individuals with mobility or neurological disabilities. Mel Nowland, a retired engineer, has designed many types of electrical switches for people with limited mobility, using easily found materials such as soap dishes and Tupperware, including eye-blink, two-handed, voice-operated, and pillow switches. AUTHOR: Wechsler, K. TITLE: Doing It Yourself. JOURNAL: Quest. WEB SITE: http://www.mda.org/publications/Quest/q113diy.html. REF: Vol. 11, N

Emg Switch

The EMG Switch is an electromyographic (EMG) switch designed for use by individuals with severe physical or upper extremity disabilities. The device is operated by small controlled muscle movements and senses muscle activations to provide a switch closure. Features include simple threshold adjustment, built-in digital signal processing that extracts intentional activations from weak muscles, and an audible caregiver call tone. POWER: Uses double-A NiMH rechargeable batteries. A charger is includ

Fiber Optic Sensor With 3 Pin Connector (Model Asl 202-3 Pin)

The Fiber Optic Sensor with 3 Pin Connector, model ASL 202-3 PIN, is a sensor switch designed for use by individuals who require a small, fine, no force switch type. This single function fiber optic sensor switch has a round target area with an adjustable activation range from touch to 2.5 inches. It can be programmed for either normally open or normally closed operation. In the normally open (NO) mode, switch activation occurs when an object is detected in the selected range. In the normally c

Leap Motion

The Leap Motion is a computer controller controlled by fingers, meant to replace keyboard and mouse designed for individuals with arthritis, carpal tunnel syndrome, cerebral palsy, or fine motor, neurological, or upper extremity disabilities. The Leap Motion Controller contains 2 camera sensors and 3 infrared LEDs. Leap Motion’s software translates the information from the camera sensors into 3-D input. Leap Motion incorporates natural motions and finger tracking. The Leap Motion Controller con

Light-Activated Switch

The Light-Activated Switch is a photoelectric switch designed for use by individuals with physical disabilities. The switch is activated by directing a light pointer at a light-sensitive panel. POWER: 9-volt battery. DIMENSIONS: 4 x 4 x 2 inches.

Movement Sensor Switch (Model 655)

The Movement Sensor Switch, model 655, is a motion detection switch designed for use by individuals with upper extremity and other physical disabilities. This switch operates in momentary, latched, or timer mode and activates the attached toy or appliance with the slightest movement in front of the sensor.

Non-Adjustable Proximity Sensor

Non-Adjustable Proximity Sensor is designed for use by individuals with limited physical mobility and control.  It can be used as a general-purpose switch; however this proximity sensor is small enough to use as a head-switch and sensitive enough to function through padded headrests and plastic trays. A red light indicates activity. The flat rectangular package has mounting holes for easy installation. 

Normally Open Sensing Cells (Model No-1)

The Normally Open Sensing Cells, models NO-1 is a low-profile, sealed sensing switches in wafer form. It feature 2.5 pounds nominal sensitivity with positive bottoming to withstand continuous body weight, and a water resistant sealed casing. This switch can be mounted using Mastic cement, epoxy, DA-12 tape, or the optional metal holder. OPTIONS: Metal holder. DIMENSIONS: 1.5 inch in diameter. COLOR: Black.

Photocell Switch (Model 790, 790-8)

Photo Cell Switch, model 790 and 790-8, is a photoelectric switch designed to be activated by any body movement for individuals with physical diabilties. The switch is activated by interrupting a light beam and creating a shadow over the electronic photocell.

Pre-Writing Switch.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: A child using a metal bolt as a writing implement can activate a tape player or other device by tracing the appropriate path on a metal cookie sheet. This activity strengthens fine motor and grasping skills. Describes a motion detection switch, constructed by soldering a subminiature plug to one end of a 4 inch conductor wire and wrapping the other end tightly around a 4 inch long metal bolt. Simple paths or letters are cut from paper or cardboard and

Proximity Sensor (Model Prx-101)

The Proximity Sensor, model PRX-101, is a sensor switch designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. This single-function switch requires no touch or pressure. This proximity switch can detect something that has an electronic capacitance, such as a hand or finger up to one-quarter inch away. When used with a sensor output and a power supply, this sensor gives the user switch access to a number of components using a 1/8 mono jack. POW

Proximity Sensor (Model Prx-102)

The Proximity Sensor, model PRX-102, is a sensor switch designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. This single-function switch requires no touch or pressure. This proximity switch can detect something that has an electronic capacitance, such as a hand or finger up to one-quarter inch away. When used with a sensor output and a power supply, this sensor gives the user switch access to a number of components using a 1/8 mono jack. POW

Proximity Sensor (Model Prx-103)

The Proximity Sensor, model PRX-103, is a sensor switch designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. This non-adjustable single-function switch requires no touch or pressure. This proximity switch can detect something that has an electronic capacitance, such as a hand or finger up to one-quarter inch away. This sensor ignores non-capacitive materials and is mountable on a headrest or tray. When used with a sensor output and a power s

Proximity Sensor (Prx-104)

The Proximity Sensor, model PRX-104, is a sensor switch designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. This adjustable single-function switch requires no touch or pressure. This proximity switch can detect something that has an electronic capacitance, such as a hand or finger up to one-quarter inch away. This sensor ignores non-capacitive materials and is mountable on a headrest or tray. When used with a sensor output and a power suppl

Sensor Switch (Model 722)

The Sensor Switch, model 722, is a motion detection switch designed for use by individuals with spinal cord injuries, severe physical disabilities,or upper extremity disabilities. Activated by controlled small muscle movement, the switch consists of a control box with two sensor pads connected to it. The sensors can be placed on the forehead, under fingers, on work surfaces, on a headrest, or wherever the user can best control them. The sensitivity of the switches can be adjusted to increase or

Sensor Switch Kit (Model 1066)

The Sensor Switch Kit, model 1066, is a motion detection switch designed for use by individuals with upper extremity and physical disabilities. This switch can be used to operate one or two devices and allows the sensors to be placed where the user has the most control. The sensitivity of the switch can be adjusted to increase or decrease the amount of movement required for switch activation. A light and audible tone provide feedback when a switch closure is made. This switch operates in momenta

Single Sensor Switch

The Single Sensor Switch is an motion activated sensor and eyebrow switch designed for use by individuals with severe physical or neurological disabilities or spinal cord injury. This switch's sensor is attached to a person's forehead or eyebrow, elsewhere on the head, or to another part of the body. The user activates the switch by moving the part of body to which the sensor is attached, such as raising the eyebrow. The round sensor responds to slight changes in pressure, including twitches and

Tabletapper Switch

The TableTapper Switch is a vibration detection switch for use by people with fine motor and upper extremity disabilities. The TableTapper is placed on a hard surface, such as a tabletop or counter, and when the user taps on the surface, the switch activates the connect device. This switch has a standard 0.125-inch plug, and can be used with a variety of communication or other battery-operated devices. It has two modes of control (latch and timing) and a variable sensitivity ranging from a light

Voice Switch

The Voice Switch is a sound-based control switch designed for use by individuals with neurological or severe physical disabilities, and a sound production training device designed for use by individuals with speech disabilities. This device provides a switch closure to control connected assistive technology in response to sound production, and it can be used to train sound production capability by persons with speech disabilities, including persons who have limited ability to produce sounds with

Wemo Motion

The WeMo Motion is a motion detection switch designed for use by people with cognitive or memory disabilities or parents or caregivers of adults or children with developmental or other disabilities that may result in their failing to turn lights or appliances on or off. This switch is designed to be used with the WeMo app (see separate entry) which connects to the WeMo Motion though a WiFi network in the user's home. A home WiFi network is required for operation of this product. The WeMo Motion

 
Processing...


Driving Walking/Biking Public Transit  Get Directions