Detectable Warning Surface

Results: 53

Aco Detectable Warning Device

The ACO Detectable Warning Device is a detectable warning surface designed for use by individuals who are blind or have low vision. The polymer concrete surface is made from polyester resins reinforced with mineral aggregates and fillers, with an enhanced micro-texture design located on and between truncated domes for increased slip resistance and sound-on-cane detectability. The surface provides up to four times the compressive strength of cement concrete, with minimal water absorption to preve

Ada Compliant Paver (Model 200)

The ADA Compliant Paver, model 200, is a detectable warning surface designed for use by individuals who are blind or have low vision. This paving stone with truncated domes provides visual as well as textural contrast to guide individuals with visual impairments on conventional publicly utilized pavements, sidewalks and other components of the public right of way, including wheelchair curb ramps at street intersections. The unit is made from a concrete mix under extreme pressure and high frequen

Ada Detectable Warning Paver

The ADA Detectable Warning Paver is a detectable warning surface designed for use on sidewalks, crosswalks and entries to provide tactile warnings to pedestrians who are blind or have low vision. The surface features truncated domes that can be felt underfoot or with a white cane. The paver is manufactured from recycled glass using RG Stone hardface technology. It has an extra dense surface that handles heavy traffic, harsh weathering, salt, and ice removal, and it can be cut, fit, and contoured

Ada Paver

The ADA Paver is a detectable warning surface designed for use by individuals who are blind or have low vision. These dry-pressed paving bricks bear a Braille-like detectable warning surface to help pedestrians with visual impairments anticipate and avoid a hazard ahead. The provision of the detectable warning surface on locations such as curb cuts and the edges of loading docks or elevated or level boarding platforms in transit stations enables most visually impaired persons to come to a stop b

Advantage Surface Applied Tactile Warning System

The Advantage Surface Applied Tactile Warning System is a detectable warning surface designed for use by individuals who are blind or have low vision. Made of stainless steel, this tactile warning system has truncated domes that resist snow plow damage during snow and ice removal in cold climates. The surface can be applied to curb ramps, platform edges, and other locations in public rights of way requiring an upgrade to meet ADA (Americans with Disabilities Act) guidelines. DIMENSIONS: 2 x 3 fe

Advantage Tactile Cast In Place Tile

The Advantage Tactile Cast In Place Tile is a detectable warning surface designed for use by individuals who are blind or have low vision. Made of stainless steel, the surface has truncated domes that are resistant to snow plow damage during winter clearing of snow and ice. This replaceable cast in place tile is installed by setting it directly in newly poured concrete, but can be replaced without demolishing the existing concrete. DIMENSIONS: 2 x 3 feet, 2 x 4 feet, or 2 x 5 feet.

Alertcast Detectable Warning Tile

The AlertCast Detectable Warning Tile is a detectable warning surface designed to provide tactile warning of danger to pedestrians who are blind or have low vision. Made from glass-reinforced thermoset plastic, it has a top panel molded with truncated domes and bottom docking anchors that are embedded into wet concrete. The anchors lock the unit securely into the concrete without trapping air beneath the surface. The surface is safety-speckled for slip resistance, and the perimeter has a beveled

Alertmat Detectable Warning System

alertmat Detectable Warning System is a detectable warning surface and non slip outdoor matting designed to provide tactile warning of dangers to pedestrians who are blind or have low vision. This surface-applied detectable warning mat is made from 100 percent recycled styrene butadiene from tires mixed with nylon, rayon and polyester fibers. It has truncated domes and can be used for retrofitting or new installations. It is slip-resistant and has a thin surface profile and perimeter beveled edg

Alerttile Detectable Warning

AlertTile Detectable Warning is a detectable warning surface designed for use to provide tactile warning of dangers ahead for pedestrians who are blind or have low vision. Applications include curb ramps and platform edges. Made from a glass reinforced thermoset composite, its semi-rigid composition is flexible enough to conform to ramp irregularities in retrofit applications. The surface has an in-line pattern of truncated domes to provide tactile warnings. The surface is safety-speckled for ad

Armor-Tile Tactile Systems

Armor-Tile Tactile Systems are detectable warning surfaces designed for use by individuals with low vision or who are blind. Designed to mark curb ramps and pedestrian walkways, these tiles can be used for casting into wet concrete or for surface applcation in retrofitting or new construction. The complete system includes tile, adhesive, fasteners, and sealant. The tile has a textured surface and beveled edges and can be cut to conform to angled and radius ramps. DIMENSIONS: Available in 12 x

Cast In Place Replaceable Tactile Warning Surface Tile

The Cast in Place Replaceable Tactile Warning Surface Tile is a detectable warning surface designed to provide warnings of streets and other potentially dangerous areas for individuals who are blind or have low vision. This is a detectable warning surface with truncated domes for use in new curb ramps or new construction. It is installed by being pressed into place in freshly poured concrete. The unit may be replaced by removing the bolts and inserting a new interchangeable unit in the existing

Cast-Dwd

CAST-DWD is a detectable warning surface designed for use by individuals who are blind or have low vision. The CAST-DWD panels are made from cast iron, with truncated domes to provide tactile warnings to visually impaired pedestrians. The panels can withstand rigorous conditions such as snow plows, street cleaning machines, and vehicular traffic. Panels are installed directly into wet concrete and held in the concrete by a locking device. The panels have a static coefficient or friction (slip re

Castintact 3 Tactile Warning Panel

The CASTinTACT 3 Tactile Warning Panel is a detectable warning surface designed for use by individuals who are blind or have low vision. This cementitious concrete panel is for exterior use at the bottom of curb ramps and other locations where tactile warnings are needed, such as depressed corners, raised crosswalks, raised intersections, borders of medians and islands, the edge of transit platforms, and sidewalks where railroad tracks cross. Panels can be used for both new construction and retr

Detectable Warning Panel

The Detectable Warning Panel is a detectable warning surface designed for use on pre-cast curb ramps and other locations to provide tactile warnings to pedestrians who are blind or have low vision. The surface comes as cladding for a custom precast concrete unit available in various colors and configurations, with matching custom components. The paver is wet set into fresh concrete and mechanically anchored to the sidewalk to become part of the walking surface. The non slip surface has truncate

Detectable Warning Plate

The Detectable Warning Plate is a detectable warning surface designed for use by individuals who are blind or have low vision. Made of cast iron, the plate is durable and adheres to concrete without wearing, pealing, cracking or delaminating. The measured coefficient of friction is 0.9. The cast iron material can withstands snow plow abuse. The unit is installed into prepared concrete with reusable lifting springs. Upon exposure to moisture, the unpainted cast iron plates forms a temporary iron

Detectashield

DetectaShield is a detectable warning surface designed for use by individuals who are blind or have low vision. It is composed of panels that can be integrated into paved surfaces to help visually impaired individuals detect intersections by foot or cane. It has high-traction surfaces located on both truncated domes and bands of the panel surface between the rows of domes. The domes' smooth sides increase audibility when a pedestrian's cane strikes the surface. Made from sealed concrete reinforc

Durabak Detectable Warning Mat

The Durabak Detectable Warning Mat is a detectable warning surface designed for use as a tactile warning system for pedestrians who are blind or have low vision. This suface is designed to be applied to an existing surface to make it compliant with the Americans with Disabilities Act (ADA). It is a permanent single-piece mat with truncated domes, molded in resilient rubber. The mats come pre-coated with 3 coats of Durabak, a slip-resistant, flexible polyurethane safety coating. The bottom of the

Duralast Detectable Warning Plate

The DURALAST Detectable Warning Plate is a detectable warning surface designed for use to provide tactile warning of potential danger to pedestrians or transit passengers who are blind or have low vision. This surface-mounted, square or rectangular iron plate has a surface pattern of raised bumps. It is locked in place with underside bolts. DIMENSIONS (LxW): 24 x 18 inches; 24 x 24 inches; or 30 x 24 inches. COLOR: Gray.

Duralast Radial Detectable Warning Plate

The DURALAST Radial Detectable Warning Plate is a detectable warning surface designed for use to provide tactile warning of potential danger to pedestrians who are blind or have low vision. The plate has a radial shape, based on a radius of either 10 or 15 feet, for use in a curb ramp. Its surface has a pattern of raised bumps. This surface-mounted iron plate is locked in place using underside bolts. It is available with no coating or powder coated. DIMENSIONS (LxW): 18.81 x 24 inches. COLOR: Gr

Duratek

Duratek tile is a detectable warning surface designed to provide tactile warning of possible danger to individuals who are blind or have low vision. Applications include curb ramps and pedestrian crossings, transit platforms and bus stops, store entrances, parks and recreational areas, building access areas, and temporary ramps. These heavy duty tiles are pressure molded into rigid, solid plates with tactile surfaces using the preferred truncated dome design. Tiles are lightweight and transport

Duratek-Ci

Duratek-CI is a detectable warning surface designed for use to provide warning of potential danger to pedestrians who are blind or have low vision. This detectable warning tile has a solid cast iron plate with a truncated domes design. Applications include curb ramps and pedestrian crossings, transit platforms and bus stops, store entrances, parks and recreational areas, and building access areas. Cast-in-place installation is helped by the tiles slim undercarriage. Fasteners are built into the

Dw Dots

DW Dots is a detectable warning surface designed to provide tactile warning of danger to pedestrians who are blind or have low vision. The surface features a pattern of raised domes that can be felt by a pedestrian. The surface can be installed onsite after the walking surface is installed or cured, or it can be installed offsite in a marble, granite or paver stone prior to a tile installation. It can be installed in any spacing pattern. DW Dots are made with precise tolerances and appearance. D

Ez-Set Tile

The EZ Set Tile is a detectable warning surface designed for use to provide tactile warnings of danger to pedestrians who are blind or have low vision. This heavy duty replaceable cast-in-place detectable warning tile is a double-reinforced polymer concrete composite with a stainless steel anchoring system,. It is an all season product that can be used in high wear conditions such as transit platforms or shopping cart areas. The tile installs in concrete, and it has a flat bottom surface to elim

Hall Divider For Blind Students

DO IT YOURSELF ENTRY --- PURPOSE: To indicate to blind students and staff in a school hallway that they are moving to the left side of the hall into oncoming students. Apply a colored "tap strip" down the middle of the hall for its entire length. The strip is easily seen by sighted staff, and it returns a distinct sound and feel when tapped by the blind students' canes. TITLE: Hold That Line (in Springboard). AUTHOR: Pfotenhauer, M.. JOURNAL: RE:view. REF: Vol. 36, No. 1, Spring 2004: p. 34. PAG

Hanover Detectable Warning Paver

The Hanover Detectable Warning Paver is a detectable warning surface that can be used in a pedestrian area to warn individuals who are blind or have low vision of an impending hazard on the route ahead. The paver has a distinctively textured walking surface with truncated domes that can be sensed by a cane or underfoot. The paver is made from crushed limestone and granite bonded together under extreme hydraulic pressure. A non-slip texture is applied to the surface of the paver. The paver can wi

Peel-N-Stick Ada Detectable Warning Mat

The Peel-N-Stick ADA Detectable Warning Mat is a mat designed to alert or warn visually impaired individuals of pavement end and hazardous street traffic areas. Molded from UV protected polyurethane, these mats can be installed on paved areas as a surface mount - just place, peel, roll, anchor and seal. Visually impaired individuals can feel the raised, truncated domes with their feet and be alerted to a different surface than the surrounding concrete sidewalk and an upcoming intersection.

Platform Edge Warning Surface

The Platform Edge Warning Surface is a detectable warning surface designed for use along off-street rail platforms by with blindness or low vision. Made of stone and resin composite, this tile serves as a warning and to identify the location of off-street rail platforms. The blister surface can be read by foot or cane, warning individuals with vision disabilities that they are approaching a rail platform edge. The blister pattern is offset and can be used to identify the direction the platform e

Ramp Up

Ramp Up is a detectable warning surface designed for use by individuals who are blind or have low vision. This pre-finished sidewalk ramp mat with truncated domes adheres to either concrete or asphalt. The unit has a low profile and zero trip point. It is surface applied, but when installed on a street corner curb ramp it gives the look of a cast in place tile . To install, place the mat in its intended position, place tape the around the mat's perimeter and remove mat, use a trowel to apply SST

Redimat

RediMat is a detectable warning surface designed for use to provide a tactile warning of traffic and other dangers for individuals who are blind or have low vision. This flexible urethane mat with pre-applied adhesive can be nstalled on asphalt or concrete. The adhesive has a protective backing that is peeled off before installation. The flexibility of the polyurethane material enables it to conform to uneven surfaces. The mat comes in inline, offset, or wedge configuration, with a beveled edge

Safety Dot

---- PROTOTYPE --------- PURPOSE: To design a prototype of a set of Braille labels that are mounted on public handrails to allow individuals with visual disabilities to safely and easily navigate stairs. Even with a guide cane in hand it can be difficult to negotiate a flight of stairs solely on instinct. The Safety Dot is a set of metallic Braille labels mounted on a handrail that inform the user of the number of steps remaining on the stairway. TITLE: Handrails That Speak. WEBSITE: Yanko Desig

Safti-Trax

The SAFTI-TRAX Detectable Warning System is a detectable warning surface designed for compliance with the Americans with Disabilities Act (ADA) requirement for a tactile warning system for individuals who are blind or visually impaired. This system incorporates resilient rubber domes with an overcoating of DURABAK, a one-part, non-slip, flexible polyurethane safety coating. It is a permanent system that is applied directly to clean dry surfaces without needing specialized labor or machinery. No

Skidguard

SkidGuard is a non-slip floor and stair tread covering and detectable warning surface designed for use to make floors and stairways safer for pedestrians with low vision or balance, walking or lower extremity disabilities. This non skid, high visibility, abrasion resistant pedestrian surface includes glass bead, which heightens the visibility of the surface when light sources reflect off it. The angular cut glass also increases its skid resistance. The covering can be used on ramps, stair treads

Slimtek Ii

Slimtek II is a detectable warning surface designed to provide tactile warning of potential dangers to individuals who are blind or have low vision. It uses the truncated domes design. This cast-in-place detectable warning surface is lightweight but durable, with a slim profile and an anchor system that allows for quick tile replacement. DIMENSIONS (LxW): 2 x 2, 2 x 3, or 2 x 4 feet. WARRANTY: The manufacturer warrants its products to be free from manufacturing defects for a period of 5 years fr

Sstd Traditional System

The SSTD Traditional System is a detectable warning surface designed for use by individuals who are blind or have low vision. This system provides a one piece, monolithic look for applications ranging from radius corners to a long stretch of domes running the length of a walkway. All seams are hidden because of the way the system is installed on-site. This flexible cement-based mat can cover many square feet of asphalt or concrete in one application. It is attached to the surface using the manuf

Stairglow Stairnosing (Models Ps101 & Ps102)

Stairglow Stairnosing, models PS101 and PS102, is a high contrast warning surface and anti-slip stair tread covering designed to increase stairway safety for individuals with low vision or balance or walking disabilities. A photoluminescent strip and a non-skid tread are molded into the stair surface. The photoluminescent strip glows for several hours after being exposed to ambient light. The surface creates a highly visible step edge to reduce falls and to guide people using the stairs during p

Step-Safe Cast In Place

Step-Safe Cast In Place is a detectable warning surface designed to meet ADA (Americans with Disabilities Act) accessibility guidelines for individuals who are blind or have low vision. Designed for permanent installation, this pre-cast polymer concrete tile has truncated domes to alert visually impaired pedestrians of impending hazards in pedestrian travel routes in public buildings and/or public rights-of-way. The polymer concrete provide high strength and resistance to corrosive agents such a

Step-Safe Surface Applied Mat

The STEP-SAFE Surfaced Applied Mats is a detectable warning surface designed for use on curb cuts and other locations to alert pedestrians who are blind or have low vision about approaching hazards. The mat is brightly colored, and it can be cut to fit. It has a pattern of truncated domes that can be felt underfoot. The mat is durable and can maintain its slip resistance for years. DIMENSIONS: 24 x 36, 24 x 48, or 24 x 60 inches. Dome spacing is 1.71 inches. COLOR: Gray, red or yellow.

Suredome Detectable Warning Tile

The SureDome tile is a detectable warning surface designed to be installed on curb ramps, platform edges, and other surfaces to provide tactile warnings to pedestrians who are blind or have low vision. These tiles feature a pattern of truncated domes. They are made from a modified concrete with additives and fiber technology and have high compression and flexural strength. The tiles are thin, wear resistant, and slip resistant. When wet set into concrete, the tiles molecularly bond to the surrou

Surface Applied Tactile Warning Surface Tile

The Surface Applied Tactile Warning Surface Tile is a detectable warning surface designed for use by individuals who are blind or have low vision. This truncated dome detectable warning systems can be used to retrofit existing curb ramps or platforms. Tiles are secured over an existing concrete substrate with color matched fasteners and structural adhesive. Tiles are available in rectangular and radius styles and have large perimeter beveled edges for smooth transition. The surface is made of a

Tacdots

Tacdots are detectable warning and orientation markings designed for use by people who are blind or have low vision. These are raised dots affixed to the ground or floor to provide a tactile pathway. Each Tacdot makes a distinctive sound when tapped with a cane to differentiate it from an irregularity in the surface. Tacdots can be used in indoor and outdoor environments. COLOR: Custom colors are available.

Tactile Flooring

Tactile Flooring is a detectable warning surface and tactile and visual orientation marking designed for use by individuals who are blind or deaf blind or have low vision. Each rubber tile has raised circular bumps and is available with a broad, high-contrast stripe. DIMENSIONS: Each tile is 35.7 x 35.7 inches. COLOR: Yellow stripe on jet, Dartmoor shale, charcoal slate, pewter, London fog, Moroccan blue, ruby rouge, roasted chestnut, sandcastle, Cafe Au Lait, Fall Harvest, burnt orange, dolphin

Tactile Warning (Knurling)

Tactile Warning (Knurling) is a coating option for door lever handles, designed for use to identify potentially hazardous areas such as electrical closets and mechanical equipment rooms for individuals who are blind or have low vision. Knurling is available in SAT design levers only from Schlage. Outside lever only is knurled unless otherwise specified.

Tekway Dome-Tile

TekWay Dome - Tile is a detectable warning surface designed for use on curb cuts and other locations to indicate potential danger ahead for pedestrians who are blind or have low vision. This concrete-based tile has truncated domes arranged in parallel rows and columns. The tile is made with iron oxide pigments, which have strong alkaline resistance and do not fade in sunlight. DIMENSIONS (LxW): 1 x 1, 2 x 2, or 2 x 2.5 inches and 0.6875 inch thick. Center to center dome spacing is 1.67 inches (s

Tile Tech Detectable Warning Paver

The Tile Tech Detectable Warning Paver is a detectable warning surface designed for use by individuals who are blind or have low vision. This paving tile for ramps and other walking surfaces features a pattern of raised truncated domes that can be detected underfoot and by cane to alert pedestrians with visual impairment to a hazard on the route ahead, such as a street or a drop-off. The unit is made from Portland cement, crushed aggregates & inorganic alkaline resistant pigments, with a sho

Topmark

TopMark is a detectable warning surface designed to help individuals who are blind or have low vision recognize the boundary between vehicular and pedestrian areas. The surface features truncated domes that are detectable by cane or underfoot, thereby alerting pedestrians with visual impairments to stop and proceed with caution. Preformed thermoplastic sheets are surface-applied with sealer and bonder paste. The material is durable but flexible, allowing it to conform to irregular surfaces for u

Truncated Dome Surface For Pedestrian Intersection Crossing Points

The Truncated Dome Surface for Pedestrian Intersection Crossing Points is a detectable warning surface designed for use in outdoor environments for individuals with blindness or low vision. Made of stone and resin composite, this tile is used to provide a warning and to identify the location of a pedestrian crossing point. The tile is used where vehicular traffic meets a pedestrian traffic way or where a lowered curb is used to provide a crossing point. Red tiles are designed to be used on signa

Truncated Dome Tactile Pedestrian Warning Panel

The Truncated Dome Tactile Pedestrian Warning Panel is a detectable warning surface designed for use on curb ramps and other locations to provide tactile warning of danger for pedestrians who are blind or have low vision. The truncated domes provide a tactile signal to the visually impaired as they move from one surface level to another. The panels can be installed in almost any shape or configuration, and the same panel can be applied to the surface using add-on anchors or embedded. Beveled edg

Type 3 Ada Compliant Warning Paver (Models Ada-1, Ada-2 & Ada-3)

The Type Three ADA Compliant Warning Paver, models ADA-1, ADA-2 and ADA-3, is a detectable warning surface designed for use on curb cuts and other locations to provides tactile warning of danger ahead to pedestrians who are blind or have low vision. The paver has truncated domes that can be felt underfoot. The domes on model ADA-1 are arranged in a staggered pattern, while those on models ADA-2 and ADA-3 are arranged in straight lines. The domes are the same height and width on all models. The d

Ultra-Ada Pad

The Ultra-ADA Pad is a detectable warning surface designed for use to help pedestrians who are blind or have low vision to anticipate intersections and other potentially dangerous areas. The pad has raised, truncated domes which pedestrians who are visually impaired can feel with their feet. This, in combination with the tapping of a cane on a different surface than the surrounding concrete sidewalk, can alert them to an upcoming intersection. The pad can be used to retrofit parking lots and ot

Ultra-Ada Pad, Composite Model

The Ultra-ADA Pad, Composite Model, is a detectable warning surface designed for use to provide tactile warnings to pedestrians who are blind or have low vision about potential dangers ahead, such as an upcoming intersection. Visually impaired pedestrians can feel the raised, truncated domes on the surface with their feet. In addition, the surface is noticeably different from the surrounding concrete sidewalk when tapped with a cane. The unit is made from a composite material with continuous fi

Ultrapoly Braxx

Ultrapoly Braxx is a non-skid detectable warning surface designed for use by individuals who are blind or have low vision. Based on Non-Skid technology initially developed for the United States Navy, it can be used to protect against pedestrian slip hazards on areas such as ramps, stairs, boat decks, and platform edges. The surface comes in sheets with a wear and impact resistant baseplate of ultra high molecular polyethylene (UHMW-PE) covered with raised non-skid truncated domes comprised of sa

Vanguard Detectable Warning System

The Vanguard Detectable Warning System is a detectable warning surface and anti-skid surface designed for use by individuals who are blind or have low vision. This warning surface can be used for new construction or retrofitting on access ramps, transit platform edges, or hazardous vehicular ways. The surface is manufactured on site out of liquid plastic epoxy, with truncated domes that are liquid applied. This allows the surface to follow the existing contours of the structure to which it is a

Wet Set Detectable Warning Panel

The Wet Set Detectable Warning Panel is a detectable warning surface designed for use on curb ramps to warn pedestrians who are blind or have low vision about dangers ahead. Each panel, or tile, has truncated domes that can be felt underfoot. Units are rectangular, but arcs and other custom shapes are available. The entry side and exit side of the unit has an elevation of 15 degrees to anchor the unit in place. The lateral edges are at an angle of 90 degrees, thereby allowing for minimal gaps

Parent Category: Orientation
 
Processing...


Driving Walking/Biking Public Transit  Get Directions