Bathtub Seats General

Results: 97

Abbey Bathseat

The Abbey Bathseat is a bath seat designed for use by individuals with lower extremity, balance, neurological, or mobility disabilities. It is made from reinforced plastic with 7 millimeter slots for drainage and a semicircular indentation in the front of the seat to facilitate intimate hygiene. The seat has four suction cups to hold it securely in position in the tub. COLOR: White. DIMENSIONS (LxW): 460 x 360 millimeters (mm). The height is adjustable to 150, 200, 250 and 300 mm or 150 and 250

Adjustable Bath And Shower Seat

The Adjustable Bath and Shower Seat is a bath seat designed for use by individuals with mobility and balance disabilities. Available with or without a back, the seat can be used in most bathtubs and shower stalls. The unit's seat and the back are plastic with easy-to-grip handles and molded-in areas for hand-held shower spray storage. The aluminum legs are flared to help prevent tipping and have slip-resistant rubber tips. DIMENSIONS (HxDxW): 15.5 x 16.5 x 18 inches without back; 18 x 16.5 x

Adjustable Bath Benches (Models 9010 & 9020)

The Adjustable Bath Benches are bath seats designed for use by individuals with mobility, balance, or cognitive disabilities who have difficulty standing in a tub or shower. Available with or without a molded back, the bench has a plastic seat and back with multiple drainage holes and is equipped with non-skid rubber tips. DIMENSIONS (HxDxW): Seat adjusts from 14 to 20 inches high x 11x 19 inches. CAPACITY: Weight capacity is 300 pounds.

Adjustable Bath Chair (Models B0732, B0740 & B0848)

The Adjustable Bath Chair, models B0732, B0740, and B0848, is a reclining bath seat designed to provide children with lower extremity, mobility or severe physical disabilities with a stable, comfortable seat while bathing. This chair has a frame constructed of PVC tubing and a mesh seat. The top and bottom rails of the frame are padded. The angles of back and leg rests of this bath chair are adjustable, and the chair includes chest and leg safety straps. The mesh is removable for cleaning. OPTIO

Adjustable Composite Bath & Shower Seat

The Adjustable Composite Bath and Shower Seat is a shower chair/bath seat designed for use by individuals with mobility and balance disabilities. This seat has large, easy-to-grip handles and molded-in storage areas for a hand-held shower spray. The seat is designed for individuals requiring a larger seating area and has S- shaped drainage holes to eliminate graywater pooling. DIMENSIONS (HxDxW): 18.5 x 20 x 25.5 inches. The height adjusts from 18.5 to 23.5 inches in unlimited increments. CAPAC

Adult Multipurpose Chair (Model Pc-100-A)

The MultiPurpose Chair (PC-100-A) is a semi-reclining bath seat or chair for floor activities designed for adults. The chair is made of a plastic tubular frame with a vinyl-coated mesh sling seat and suction base on the front legs. The materials are resistant to mildew and bacteria. Replacement slings and suction cups available. DIMENSIONS: Seat width is 14.75 inches, overall seat width is 17. 5 inches, and length is 36 inches. WEIGHT: 8 pounds.

Aquarian Bath Seat (Model Aqb6)

The Aquarian Six Slat Bath Seat, model AQB6, is a bath seat designed for use by individuals with lower extremity, balance, or mobility disabilities. Designed to be used in conjunction with the Aquarian Four Slat Bathboard (see separate entry), this seat is made from a durable extruded plastic tube and strengthened with internal plywood slats to accommodate a person requiring a larger seat area. The seat has an H-shaped frame on the underside. DIMENSIONS: The seat size (LxW) is 460 x 280 millimet

Aquarian Four Slat Bathboard (Model Aq48)

The Aquarian Four Slat Bathboard, model AQ48, is a bath seat designed for use by individuals with lower extremity, balance, or mobility disabilities or arthritis. This four-slat seat is made from a durable extruded plastic tube and strengthened with internal plywood slats, offering added support for the user. This seat has easy-to-fit cleats on the underside. DIMENSIONS: 26, 27, or 28 inches long; all seats are 230 millimeters wide. CAPACITY: 159 kilograms (25 stones).

Aquarian Six Slat Showerboard (Model Aq65B))

The Aquarian Six Slat Showerboard, model AQ65B, is a shower seat designed for use by individuals with lower extremity, mobility, or balance disabilities or arthritis. Made of extruded plastic tube strengthened with internal plywood slats, this bathboard is designed for users requiring a larger seat area. The seat’s underside is equipped with easy to fit cleats. DIMENSIONS: 26 inches, 27 inches, or 28 inches. All models are 14 inches wide. CAPACITY: 159 kilograms (25 stones).

Bath And Shower Seat

The Bath and Shower Seat is a bath seat designed for use by individuals with spinal cord injury or mobility or balance disabilities. Available with or without a back rest, the seat has a heavy-gauge aluminum frame with height-adjustable legs with non-skid rubber tips and a molded, textured polyethylene seat with drainage holes. The backrest is made of the same material as the seat. Both the backrest and seat have a handhold slot to aid in transfers. The seat has a wide base for added stability.

Bath Bench Without Back & Heavy Duty Bath Bench

The Bath Bench without Back and the Heavy Duty Bath Bench are shower benches designed for use by individuals with mobility disabilities. Both models are height-adjustable and have molded, composite contoured seats with a textured finish and hand holds, and aluminum frames with suction feet. The Heavy Duty Bath Bench also has a molded, contoured back with a textured finish and drainage holes. DIMENSIONS: The height adjusts on both models from 14 to 18 inches. CAPACITY: The backless bench has a 30

Bath Frame

Tubular steel frame with polyester webbing support surface rests on top of bathtub. Allows washing with shower hose attachment, minimizing lifting for parent or attendant. Top section of frame can be hinged to allow user to sit up. Can be stored against wall. Each unit is custom made to fit tub dimensions.

Bath Safety Bench (Model 50)

The Bathtub Safety Bench, Model 50 features molded plastic seat, chrome finished steel legs with rubber tips. DIMENSIONS: 15 h x 19 w x 11 d inches. WEIGHT: 8 pounds.

Bath Seat

CUSTOM ADAPTATION PURPOSE: To provide proper positioning for a child with multiple disabilities, including cerebral palsy and lung disease while bathing. This "Fogarty" style seat has a molded plastic seat mounted in a frame made of plastic pipe. It is equipped with a pelvic belt and a T-bar to hold the child in place. TITLE: All in the Family. JOURNAL: TAD Journal. REF: Volume 25, Number 4, Summer 2005. PAGES: 12-14. Number of pages: 4 (including cover).

Bath Seat (Model 1880A)

The Bath Seat, model 1880A, is a bathtub seat designed for use by individuals with balance or mobility disabilities. This tip-up bath seat has teakwood slats on a brass frame. Installed on the bathtub wall, it can be folded up to the wall when not in use. The seat comes with mounting brackets and screws. DIMENSIONS (DxW): Seat is 12.75 x 18.75 inches. When up, the seat projection is 2.5 inches. CAPACITY: 400 pounds. COLOR: The frame is available with a with a stainless steel, chrome, polished n

Bath Seat Farnham With Moulded Plastic Seat (Model 09-107-3113)

The Farnham Bath Seat with Moulded Plastic Seat, model 09-107-3113, is a bath seat designed for use by individuals with balance or mobility disabilities. This seat hangs from the rim of the bath and wedges firmly into the sides as the bather sits on it. The strong contoured seat is mounted on a steel frame with hinged sides. The seat is adjustable in width for different sizes of bathtub. The tips of the frame are covered in soft end caps to protect the bath and improve grip. OPTIONS: Padded viny

Bath Stool With Padded Rotating Seat (Model Rtl12061)

The Bath Stool with Padded Rotating Seat, model RTL12061, is a bathtub or shower stool designed for use by individuals with balance, lower extremity, or mobility disabilities. This stool rotates 360 degrees and locks at 90-degree increments. The stool has adjustable height aluminum legs, a plastic seat with a covered foam seat surface, and a removable slotted plastic shelf below the seat. DIMENSIONS: The seat adjusts from 16 to 23 inches high in 1-inch increments. The seat diameter is 13.75 inch

Bath Trax

Bath Trax is a combination caster shower chair and reclining bath seat designed for use with children and adolescents with mobility disabilities. The three-piece unit comprises a multi-position mesh support sling with a torso belt, a rolling chasis with five-inch locking casters, and a removable tub support frame. To use the unit, which works with any standard bathtub, the child is placed on the sling which is affixed to the rolling chasis. The rolling chasis is then placed beside the bathtub wi

Bath Tub Seat With Suction Cups (Model 80)

The Bath Tub Seat with Suction Cups, model 80, is a bath seat designed for use in the bathtub or shower. The frame is made of furniture-grade tubular PVC plastic with a vinyl-coated polyester mesh seat. The legs have suction cups for attaching to the floor of the tub. DIMENSIONS (HxLxW): 17 x 18 x 17 inches. WEIGHT: 10 pounds. COLOR: White frame. The mesh fabric is available in a variety of colors.

Bathing Frame

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted bathing frame for a child with hyptonia, epilepsy, and paralysis. A parent with a child with disability was having difficulty lifting her child out of the bath and was having back problems as a result. The child was very difficult to lift out of the bath as his limbs are very floppy and he cannot hold his own head. A new bath support design was based on an original bath created for another person, making the frame construct

Bathroom Step Block

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted step block for an individual with cerebral palsy and developmental delays to use when using a bath seat. Caregivers had purchased a sliding bath seat which had adjustable legs, but the adjustment was not enough to cover the full 150 millimeter difference between the bath and the bathroom floor. It was originally suggested to extend the outside legs of the seat so they reached the floor. However, the seat was quite high and

Bathseat (Model 1720 & 1720D)

The Bathseat is a bath seat designed for use by bariatric individuals with lower extremity, mobility, or balance disabilities. Designed for use in standard bathtubs, this seat has an anodized aluminum tubular frame, double tubed for strength and a commode-style seat. A silicone seal prevents mildew and rust and vinyl cushions prevent marring of the tub. OPTIONS: Floor stand for use in shower. DIMENSIONS (WxDxH): 15.25 x 20 x 18.5 inches. The tub must be 22 inches wide at the center. CAPACITY: 8

Bathtub Transfer Benches (Models A830-32, A830-3, A830-30, & A830-31)

The Bathtub Transfer Benches are bath seats designed for use by individuals with spinal cord injury, mobility disabilities, or balance disabilities. All models have heavy-gauge aluminum frames with height-adjustable legs with rubber tips and an aluminum armrest/side rail. All models also have contoured back rests which can be attached on the right or left side. Model A830-32 has a waterproof padded vinyl seat; model A830-3 has a molded-plastic, slip-resistant seat with drainage holes; model A830

Bellavita Reclining Bath Lift

The Bellavita Reclining Bath Lift is a battery powered bath lift designed for use by individuals with mobility or lower extremity disabilities. Gently lowers users in to the bath and allows them to select the most comfortable reclining position. Has a battery sensor that checks the battery level before use and will not lower if there's not enough power to lift user up again. Features a reminder symbol on the remote for when it's time to recharge. Transfer board ensures stable entry and exit. Sea

Benebath Shower & Bath Bench

The BeneBath Shower and Bath Bench is a bath and shower bench designed for use by individuals with mobility or balance disabilities. This lightweight bench has an anodized aluminum frame with a molded plastic seat, and features contoured removable seat pads; separately height-adjustable legs; large, flared, non-skid, contoured feet; pin locks for securing adjustable parts; and molded handles in the seat. The bench can be disassembled for storage or transport in a zippered carrying bag (included)

Benebath Shower & Bath Chair

The BeneBath Shower and Bath Chair is a bath seat and shower chair designed for use by individuals with mobility or balance disabilities. This lightweight chair has an anodized aluminum frame with a molded plastic seat and back. Features include contoured seat and back pads; separately height adjustable legs; large, flared, non-skid, contoured feet; pin locks for securing adjustable parts; and molded handles in the seat and back. The chair back is positioned at a slight angle for comfort. The pa

Black Magic

The Black Magic is a child bath seat designed for use with children with physical disabilities. This device features a mesh seat which can be lowered into the tub and raised to the top of the tub using a manual lever. The frame rests on the edges of the tub and can be mounted and removed from a standard tub without permanent fixtures. Positioning straps are standard. DIMENSIONS: The maximum user height is 27 inches. CAPACITY: 65 pounds.

Blue Wave Bathing System (Models E451, E452 & E453)

The Blue Wave Bathing System, models E451, E452 and E453, is a child's bath seat designed for use with children with physical disabilities. This chair supports the child in a sitting or reclining position at a height convenient for bathing with no obstructions for the caregiver. The unit consists of a detachable, adjustable seat and a stand to raise the seat further above the tub floor. The seat features two types of upholstery a soft, sturdy polyester knit or the standard vinyl-covered polyeste

Bradgate Shower Stool With Material Back (Model 126)

The Bradgate Shower Stool with Material Back, model 126, is an adjustable shower stool designed for use by individuals with mobility disabilities. This plastic coated tubular stool has a material back for added support. It has a molded seat with a cut-away front and drainage holes that clips onto a metal support base. Other features include hand-held shower holders and non-marring rubber tips. The plastic seat is removable for cleaning. DIMENSIONS: (HxLxW): 450 to 600 x 350 x 40 millimeters. C

Change Table Plus

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create custom adapted change table for a child with developmental delays. The child’s parent requested a table which would cover most of the bath, but would still be easy and light enough to remove and store. The first thought was to build a table with a Melamine top mounted on folding legs, which could be removed when the bath was to be used for bathing. In the end, the simplest solution proved to work beautifully was a sheet of 9 millimeter MDF

Child's Bath Chair With Front Support

CUSTOM ADAPTATIONPURPOSE: To provide a child with developmental disabilities and a tracheotomy with support on all sides to prevent falls in the bath. The frame of the chair is constructed of heavy-duty PVC tubing joined with solvent bonding cement. The standard bath chair has parallel horizontal tubing sections as its base with a mesh seat stretched between them. Parallel vertical supports rise from the center of the base legs and U-shaped tubing sections padded with neoprene are attached to th

Child's Bath Position Aid

The Child's Bath Position Aid is a child bath support designed to support the child in the long sitting position in the bath. This support features an aluminum frame, adjustable double chest belts and a lap belt with plastic snap buckles, and a plastic foam seat support covered in open-mesh vinyl knit. Foam cushions protect the tub surface. OPTIONS: A 5-inch or 7-inch tray to covert the aid to a floor sitter is available. DIMENSIONS (LxWxH): The frame is 24 x 16.25 x 14 inches.

Childsafe Bath Support (Model 7200)

Padded bath support yoke with adjustable belt and safety buckle for children. Holds child in normal sitting position. Frame rests on bottom of tub, soft coating to protect tub finish. Non slip rubber mat included. Dimensions: 8 1/2 inches wide, 8 to 12 inches high. Depth: adjustable by belt.

Columbia Reclining Bath Chair (Models 8500, 8600, & 8700)

The Columbia Reclining Bath Chair is a bath seat for children and adults designed to tilt to several angles from nearly upright to reclining. The seat includes a pelvic safety belt and torso alignment belt, both with buckle. The mesh seat is fungus- and bacteria-resistant. OPTIONS: Extension legs, casters, and a head pad are available for all models. DIMENSIONS (LxW): Model 8500 is 28 x 17 inches and accommodates children up to 40 inches tall; model 8600 is 32 x 17 inches and accommodates child

Columbia Wrap-Around Bath Support (Models 7200, 7300, & 7700)

The Columbia Bath Support is a child bath seat designed to hold a child in a normal sitting position to provide trunk stabilization and to free the hands of the individual helping to bathe the child. It may also be used in other seating applications and in supervised wading pools. The support has a secure, contoured trunk yoke. The chair frame rests on the bottom of the tub and has a soft coating to protect the tub's finish. The seat features a rustproof frame, a rip-proof mesh seat, and stainle

Comfort Bather Bath Lift (Model Mau-200140)

The Comfort Bather Bath Lift, model MAU-200140, is a bath lift designed for use by individuals with balance, mobility, or lower extremity disabilities. This motorized portable bath lift features an inflatable seat and back support, air pump, and a waterproof floating hand control. The user can raise and lower the lift using the hand control, and the unit is lowered to the bottom of the tub for bathing and raised to the top of the tub for exiting. A safety feature prevents lowering of the lift un

Comfort Shower Chair

The Comfort Shower Chair is a shower stool designed for use by individuals with mobility disabilities. This chair has a tubular frame and armrests, a padded backrest, and a padded commode-style seat. DIMENSIONS: The seat is 14 inches wide and the base is 22.5 x 20 inches. CAPACITY: 335 pounds.

Corner Seat

The Corner Seat is a corner seat designed for use by children with neurological or severe physical disabilities. This chair is portable for use anywhere indoors or out and can also be used in a bathtub. It has an H-strap and hip belt to stabilize the shoulders, pelvis, and trunk and a built-in abductor to help maintain leg extension and reduce thrust. Features include a broad, stable base and easy-to-wash polyethylene surface. DIMENSIONS (HxLxW): 22.5 x 11 x 19 inches. The base is 17 x 27 inches

Custom Bath Seat

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted bath seat for an individual with multiple sclerosis. After falling in the shower, this individual determined she needed some way of stabilizing herself when using her over-bath shower. Various devices suggested by her physical therapist provided to be unsuitable for the older-style bath that has a narrow lip on the wall side. A customized bath seat, which the individual could transfer on and off independently and was remova

Deluxe Adjustable Bath Bench With Red Safety Handle (Models 9100 & 9120)

The Deluxe Adjustable Bath Bench With Red Handle is a bath seat designed for use by individuals with mobility, balance, and cognitive disabilities who have difficulty standing in a tub or shower. Available with or without a contoured back which slides into seat, the bench has a hard plastic seat and back with multiple drainage holes. The safety handle provides support and balance assistance when entering and exiting the tub. The handle can be attached to eaither side and additional handles can b

Dolphin Bath Seat (Model Do 2000)

The Dolphin Bath Seat, model DO 2000, is a child's bath seat designed for use by children with severe physical, neurological, balance, or mobility disabilities or spinal cord injury. This seat fits all standard tubs and has a folding aluminum frame upholstered with quick-drying mesh fabric. The chair is length adjustable and the seat and back adjust independently, with the back support offering 10 angle positions, including trendelenberg. The seat is depth-adjustable and offers five tilt positio

Elevated Bathtub Seat

Elevated Bathtub Seat is designed for children and adults with physical disabilities who have difficulty sitting in a tub or standing in a shower. The open front and coccyx dimple in the back provide access for personal hygiene. Additional features include smooth, rounded corners for comfort, a finger indent handle for transport and suction cup feet for stability. DIMENSIONS: 13 x 15 ½ x 8 1/2” (33 x 39 x 22 cm) CAPACITY: Supports up to 400 lbs. (181.8 kg) WEIGHT: 4 ½ lbs. (2kg) WARRANTY/GUA

Etac Bath Chair

The Etac Bath Chair is a bath seat designed for use by individuals with mobility or lower extremity disabilities or arthritis. Designed to fit most standard bathtubs, this chair-style seat has a steel tube frame with an epoxy polyester lacquered finish and an ergonoimically designed seat and an injection-molded plastic adjustable backrest. The chair is avaiable with a solid seat or a recessed seat for hygiene access; both seat styles are embossed with a safety pattern to prevent slipping. DIMENS

Flamingo, The

The Flamingo is a child's bath and toilet seat designed for use by children with severe physical disabilities or mobility disabilities. Available in three sizes and designed for children from two to thirteen years of age, the unit consists of a height-adjustable wheeled frame and a removable, multi-use padded seat covered in waterproof upholstery. When removed from the frame, the seat can be used as a toilet seat or bath seat, Removable lateral sections provide additional support if needed. The

Folding Shower Chair With Back

The Folding Shower Chair with Back is a shower stool designed for use by individuals with mobility disabilities. This molded chair has a wide contoured seat and folding back with drainage holes, molded hand-held shower holders, a folding aluminum frame, and non-marring rubber tips. DIMENSIONS (HxWxD): The seat is 17.5 x 19.75 x 17 inches. The back height is 12 inches high from the seat. Folded, the unit is 25.5 inches long x 19.75 inches wide x 7.5 inches deep. CAPACITY: 250 pounds. WEIGHT: 6.5

Folding Tub Seat

The Folding Tub Seat is a folding bathtub seat designed for use by individuals with balance or lower extremity disabilities. The seat has three horizontal slats with a textured non-slip surface. DIMENSIONS: 26 or 28 inches long. COLOR: Solid finishes include white, almond, biscuit, or gray; granite finishes include white granite, gray granite, or beige granite; metalic finishes include pewter or pearl; marble finishes include silver, white almond, or white travertine.

Frame For Bath Insert

CUSTOM ADAPTATION PURPOSE: To provide a custom adaptation of a frame for bath insert for a child with cerebral palsy. A Sunburst bath insert was purchased and a frame to mount this over the existing bath was built. A wooden model to test the fit and comfort of the proposed frame was created. Once fine-tuned, it was built by a local supplier with square stainless steel tube, which would not corrode when it gets wet. The frame fits snugly to the top of the existing bath, and has adjustable bolts

Franklin Brass Tub & Shower Seat (Model Fb595)

The Franklin Brass Tub & Shower Seat, model FB595, is a portable bath seat and shower bench designed for use by individuals with arthritis or balance, lower extremity, or mobility disabilities. Fitting standard tubs and showers, this unit has a molded plastic seat on a tube frame with non-slip rubber feet. DIMENSIONS (DxWxH): Seat area is 12 x 20 x 16 inches. The leg tip spacing is 14 inches deep x 18.62 inches wide. The tube diameter is 1 inch. CAPACITY: 250 pounds. COLOR: White.

Go-Anywhere Commode, Shower N Tub Chair

The Go-Anywhere Commode, Shower N Tub Chair is a commode, shower chair and bath seat designed for use by individuals with lower extremity or mobility disabilities. This commode chair is designed to accommodate individuals with disabilities during travel or in the home. It consists of two sections, one used for transporting from bed to toilet and into a roll-in shower. The rolling section may be connected to the fixed section of the chair which may be set up in most right- or left-hand bathtubs,

Guardian Adjustable-Height Tub Transfer Seat

The Guardian Adjustable-Height Tub Transfer Seat ia a transfer bench designed for use by persons with physical disabilities who use wheelchairs. The bench allows individuals to slide from a wheelchair into the tub. This bench features a rust-resistant anodized aluminum frame, aluminum side and backrest handles to aid transfers, suction feet, and a vinyl-covered padded seat and backrest. DIMENSIONS: The seat height adjusts from 16 to 21 inches. The seat measures 28 inches wide x 18 inches deep.

Health Circle Tub Seat

The Health Circle Tub Seat is a bath seat designed for use by individuals with lower extremity, mobility, or balance disabilities. The unit attaches to most metal or fiberglass tubs with two secure padded clamp plates with non-marring grip surfaces. This seat swivels to enable transfers from outside the tub and locks into position automatically. Swivel is controlled by a large press-to-release seat lock and swivel control. The seat is equipped with a side handle to help with standing that can be

Heavy Duty Bath Seat With Perineal Cutout (Model Cq-1720D)

Heavy Duty Bath Seat with Perineal Cutout, model CQ-1720D, is a bariatric bath seat designed for use by individuals with mobility disabilities. This bath seat has a perineal cutout and fits the contour of a standard bathtub. The frame tubing has vinyl grips to prevent marring the tub. OPTIONS: Floor stand (model 1721) for use in a shower stall. DIMENSIONS (DxW): The seat is 15.25 x 20 inches. The tub must be at least 22 inches wide, measured inside the tub. CAPACITY: 650 pounds.

Heavy Duty Tub Transfer Bench (Models Cq-1730Fl & Cq-1730Fr)

The Heavy Duty Tub Transfer Bench is a bariatric bathtub transfer bench designed for use by individuals with mobility disabilities. This seat fits standard bathtubs at least 22 inches wide at the center inside the tub. The seat is made using "tube in a tube" construction for added strength. Vinyl grips on the tubing prevent marring the tub. A short back discourages reclining and is also removable. The seat is available with wall to right (model CQ-1730FR) or wall to left (model CQ-1730FL) config

Heavy-Duty Tub Bench With Commode Cutout (Model Ig-9670C)

The Heavy Duty Tub Bench with Commode Cut Out, model IG-9670C, is a bath seat and shower commode designed for use by individuals with mobility disabilities. It features a textured, non-slip seat with commode cut-out, handles, hand-held shower holders, and a shower curtain opening molded into bench. An ergonomically- shaped reversible backrest accommodates right- or left-side transfers. The seat has Microban protection which inhibits the growth of odor- and stain-causing bacteria, mold, and milde

Homecraft Ascot Bath System

The Ascot Bath System is a combination bathboard and bath seat designed for use by individuals with spinal cor injury or mobility or balance disabilities. This unit features a padded bathboard attached to the top of the bac rest of a padded bath seat that sits on the floor of the bathtub. The seat, back, and bathboard are padded with flame-retardant foam. The seat has an epoxy-coated frame that adjusts with clamping screws for variations in bathtub depth. The seat has a cut-out for improved pers

Hygienic Adjustable Bath Benches (Models 9050 & 9060)

The Hygienic Adjustable Bath Benches are bath seats designed for use by individuals with mobility, balance,and cognitive disabilities who have difficulty standing in a tub or shower. Available with or without a backrest, the benches have a horseshoe design for hygiene purposes. The hard plastic seat and back have multiple drainage holes and the legs are equipped with non-skid rubber tips. DIMENSIONS (HxDxW): Seat adjusts from 14 to 20 inches x 12 inches x 16 inches. CAPACITY: Weight capacity is

Hygienic Bathtub Seat With Back (Model 9403)

The Bathtub Seat with Back, model 9403, is a bath seat designed for use by individuals with lower extremity, mobility, and balance disabilities who have difficulty sitting in the bathtub. The seat has arms with rubber tips which extend from the seat to the sides of the bathtub to support the chair in the tub. The seat has a horseshoe design for hygiene purposes. DIMENSIONS: The seat is 16 x 16 inches. The overall width is 28 inches. CAPACITY: The weight capacity is 250 pounds.

Inexpensive Bath Seat For Handicapped Children.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Bath sling enables parents to provide support and stability while bathing a handicapped child. A bath frame constructed of ABS pipe is covered with terry cloth, netting material, fiberglass screen or swimsuit material to form a sling. Detailed instructions are provided for several methods of constructing the bath sling. Includes diagrams. COMMENTS: May also be used in backyard swimming pools, or at the beach. SKILLS REQUIRED: Metalworking. AUTHOR: Simp

Jon-A-Chair (Model 281)

The Jon-A-Chair, model 281, is a folding shower and commode chair for children designed to increase the user's comfort and care giver's efficiency. The chair features adjustable leg rest and height, hip and trunk laterals, head support, transfer bench, and aiblity to use as a commode or inside the bathtub. The unit is modular and portable for transport and storage.

Kiwi Bath Chair

The Kiwi Bath Chair is a bath seat designed for use with children with mobility disabilities. This unit features a hand-operated mechanism to raise and lower the seat for positioning during bathing and transfers. A lever enables the unit be secured in the tub without permanent fixtures and it can be removed as needed. The unit features a mesh seat with positioning straps. DIMENSIONS: The unit fits children measuring 27 inches from the bottom of the buttocks to the mid-ear. When removed from the

Leckey Advance Bath Chair

The Leckey Advance Bath Chair is a child bath seat designed for use by children with mobility and neurological disabilities. This chair supports the child in a sitting or reclining position at a height convenient for bathing with no obstructions for the caregiver. The seat features a lightweight, stainless steel frame, adjustable legs, a removable mesh cover, articulating back and leg supports, head support, and Velcro-adjustable hip and chest belts. The chair is available in four sizes to accom

Medi Medical Bath Seat (Model 06-652-00)

Bath seat, adjustable height bench. Plastic seat with holes for water to flow through. Suction feet on legs. To adjust height of bench add metal extension legs.

Mobi Shower Trolley

The Mobi Shower Trolley is a powered height adjustable shower trolley specifically designed to enable safe and easy washing or showering while in a reclined/supine position. It is designed to be mobile and easy to maneuver. The Mobi Shower Trolley can be easily wheeled to and from any wet-room, making it an ideal bathing solution for a wide range of care settings. Four locking castors prevent movement during transfer.? It is suitable for use with a wide number of hoists.

Moen Folding Mesh Shower Seat

The Moen Folding Mesh Shower Seat is a shower or bathtub stool designed for use by individuals with lower extremity, balance, neurological, or mobility disabilities. This stool has a quick-dry mesh seat, rust-free handles and frame, and non-slip rubber feet. The unit folds for storage and transport. DIMENSIONS: 15.75 inches wide when unfolded and 2 inches wide when folded. CAPACITY: 250 pounds. WEIGHT: 4 pounds. WARRANTY/GUARANTEE: Limited lifetime warranty.

Moen Tool-Free Shower Chair

The Moen Tool-Free Shower Chair is a bathtub seat or shower chair designed for use by individuals with balance, mobility, or lower extremity disabilities. This height-adjustable chair assembles without tools and has a collapse-resistant leg design, a contoured seat back, and a non-slip seat surface with built-in drainage system. DIMENSIONS (WxD): The seat is 22 x 19.25 inches. The height adjusts from 15 to 21 inches high. The overall footprint is 18 inches. CAPACITY: 300 pounds. WARRANTY: Limite

Moen Tub & Shower Seat

The Moen Tub & Shower Seat is a bathtub or shower stool designed for use by individuals with balance, mobility, or lower extremity disabilities. This unit assembles without tools and has a contoured seat with built-in side handles and a handheld shower holder.DIMENSIONS (WxDxH): 20 x 18 x 17.5 inches. The overall footprint is 17 inches. COLOR: White. CAPACITY: 300 pounds. WARRANTY: Limited lifetime.

Multipurpose Chair (Model Pc-100-C)

The MultiPurpose Chair (PC-100-C) is a semi-reclining bath seat or chair for floor activities designed for children. The chair has a plastic tubular frame, vinyl coated mesh sling seat, and suction base on front legs. The materials are mildew and bacteria resistant. Replacement slings and suction cups are available. DIMENSIONS: Seat width is 11.5 inches, overall seat width is 14 inches, and length is 25 inches. WEIGHT: 5 pounds.

Non-Adjustable Bath Chair (Models B0403, B0435 & B0457)

The Non-Adjustable Bath Chair, models B0403, B0435, and B0457, is a reclining bath seat designed to to provide children and adults with lower extremity, mobility or severe physical disabilities with a stable, comfortable seat while bathing. . This chair has a frame constructed of PVC tubing and a mesh seat. The mesh is removable for cleaning. OPTIONS: Leg and body restraining belts; wheeled base; suction cups; and a head stabilizer are available. SIZES: Child (model B0403) for individuals 3 feet

Otter Bath Seat (Models Ot 1000, Ot 2000, & Ot 3000)

The Otter Bath Seat is a child's bath seat designed for use by children with severe physical, neurological, balance, or mobility disabilities or spinal cord injury. This seat fits all standard tubs, has a folding plastic frame and is upholstered with removable, machine-washable mesh fabric, and includes two adjustable positioning belts and width- and height-adjustable head cushions. Leg straps control abduction and adduction. The seat and back are angle-adjustable and have five angle adjustments

Quantum Bath Chair (Models Q100C & Q100F)

The Quantun Bath Chair is a bath seat designed for use by individuals with mobility disabilities. This compact, collapsible chair is designed for travel or daily use and the lightweight PVC frame requires no tools for disassembly. The flexible configuration adapts for right or left entry and transfer and right or left faucets. This seat features stainless steel hardware, suction-cup tips on the legs, a covered back support, and a single armrest. A channel in the seat enables the shower curtain

Reclining Bath Seat (Models 6518, 6518-01 & 6518-04)

The Reclining Bath Seat is designed to provide full-length trunk support for children and small adults during tub bathing. The Seat features a PVC tubing frame with over-sized rubber feet to secure the seat and prevent marring, a rip-proof mesh fabric back and seat, a pelvic belt, a removable and repositionable torso allignment belt, and safety buckles. OPTIONS: Head support and extension legs. DIMENSIONS (WxLxD): Model PC 6518, the Children's model, is 17 x 28 x 12 inches; model PC 6518-01, the

Rentwood Bath Seat (Models 09-107-2941 & 09-107-2990)

The Rentwood Bath Seat, models 09-107-2941 and 09-107-2990, is a bath seat designed for use by individuals with mobility disabilities. As the user sits on the seat, the unit wedges ½rmly between the sides of the bath, giving a stable platform. The seat is padded vinyl (09-107-2990) or molded plastic (09-107-2941), and is mounted on a coated steel frame, to which are bolted two hinged side paddles. These are adjustable in width using wing nuts. The paddles, which are tipped with soft protective e

Robby Bathing Support

Robby Bathing Support is a child's bath support designed for use by children with neurological and severe physical disabilities. The frame is made of telescoping tubes that allow the hip, knee, neck, and head support areas to be adjusted separately to accommodate various sitting and lying positions. The seat area and back length can be adjusted as the child grows. The upper mesh section can be removed for hair washing. Lower leg positioning straps are included. OPTIONS: Robby Trunk Belt for addi

Round Bath Stool

The Round Bath Stool is a bathtub stool designed for use by individuals with mobility and balance disabilities. Designed for use in narrow tubs and showers, this stool features non-slip rubber tips and height-adjustable aluminum legs that are flared to provide a stable base. DIMENSIONS: The seat height adjusts from 13 to 17 inches and is 13 inches in diameter. The legs are 13.5 inches wide and 13.5 inches deep. CAPACITY: 300 pounds. COLOR: White.

Rubbermaid Bathing Seat

The Rubbermaid Bathing Seat is a bath seat designed for use in most bathtubs by individuals with mobility disabilities. This one-piece molded seat features the Exact-Level System to permit custom height adjustment, large easy-grip handles in the seat, drainage perforations in the seat, and molded-in storage for a hand-held shower (not included) and soap. DIMENSIONS: The seat is 18 inches wide and the height adjusts from 17 to 22 inches. CAPACITY: 300 pounds. WEIGHT: 11.3 pounds.

Rubbermaid Bathing Seat With Back Support

The Rubbermaid Bathing Seat with Back Support is a bath seat designed for use in most bathtubs by individuals with mobility disabilities. This one-piece molded seat features the Exact-Level System to permit custom height adjustment, large easy-grip handles in the seat and back, drainage perforations in the seat, and molded-in storage for a hand-held shower (not included) and soap. DIMENSIONS: The seat is 18 inches wide and the height adjusts from 17 to 22 inches. CAPACITY: 300 pounds. WEIGHT: 9.

Savanah Bath Seat

The Savanah Bath Seat is a shower stool designed for use by individuals with spinal cor injury or mobility or balance disabilities. The molded plastic stool has suction cups on the legs for maximum security and a partial cutaway for easier personal cleaning. The seat can be used in cunjunction with a bathboard (not included). OPTIONS: Also available with seat height of 6 inches. DIMENSIONS: 15.75 x 9.5 x 8 inches high. CAPACITY: 420 pounds. COLOR: White.

Savannah Slatted Bathseat

The Savannah Slatted Bathseat is a bath seat designed for use by individuals with lower extremity, balance, neurological, or mobility disabilities. Made from smooth, reinforced plastic slats, the seat has four suction cups to hold it securely in position in the tub. DIMENSIONS: The seat is available in 8 or 12 inches high. The seating area is 18 x 11.25 inches. CAPACITY: 420 pounds. WEIGHT: 4 pounds.

Security Bath Chair (Model 100)

The Security Bath Chair, model 100, is a bath seat designed for use by individuals with mobility or severe physical disabilities. This seat has an epoxy-coated aluminum frame and aquamesh upholstery. The frame is availavlble with rubber or suction feet. OPTIONS: Headrest and seat belt. DIMENSIONS: The base is 15.5 x 23 inches and the seat is 18 x 17 inches. The back is 32 x 17 inches with a 35-degree angle. COLOR: White frame with a choice of forest green or navy upholstery.

Sherwood Adjustable Stools (Models Aa1522, Aa1534, & Aa1536)

Sherwood Adjustable Stools are shower or bathtub stools designed for use by individuals with spinal cor injury or mobility or balance disabilities. Designed to be used in a bathtub or a shower, stools are height adjustable and feature a slightly lower front than the back to aid in sitting and rising. The height-adjustable tubular frame has slip-resistant rubber feet and the seat is padded. Model AA1522 is the stool only, model AA1534 has a tubular backrest and armrests, and model AA1536 has a pa

Shower / Bath Chair With Backrest (Model 1369)

Aluminum bath chair. Molded plastic seat has drain holes to keep water in the tub. Handles on each side. Non-slip textured finish with contoured seat and back. Flared legs. Non-slip rubber tips. Back height 13 inches. Weight 8 pounds. Fits inside standard tub.

Shower Aide Chair

The Shower Aide is a transfer aid designed for use by individuals with balance disabilities when bathing to provide protection from falls and resulting injuries. The chair allows the bather to sit on the seat outside of the tub or shower, fold down the arms and swivel the chair to slide into the tub or shower and lock the seat in position. When the shower is completed, the user lifts the locking lever, swivels the chair back to the outside of the tub/shower, where the unit again locks into posit

Shower And Bath Seat (Models 6483, 6482, 6463, & 6462)

Adjustable height aluminum bath seat. Seat width 17 1/2 inches. Seat depth 16 inches. Seat height 16 to 20 inches. Padded vinyl seat and back. Rubber suction cups on all feet. Fits inside standard tub.

Shower And Bath Transfer Aid (Models 6481, 6484, 6461, & 6451)

Adjustable height aluminum bath seat. Seat width 17 1/2 inches. Seat depth 16 inches. Seat height 16 to 20 inches. Vinyl coated seat standard or deluxe padded Ensolite high-density foam padding, does not absorb moisture. Spans tub wall enabling easy transfer.

Sling Bath Seat

Stainless steel frame, hinged with ratchets to allow back to be reclined. Telescoping tubes to allow seat adjustment. Foam tubing slips over frame to pad hard surfaces. Polyester mesh fabric held in place with velcro straps forms seat and back upholstery. Sizes: Small, 11 inches wide, for children from one to three years; Large, 14 inches wide, for children from three to ten years.

Stand For Baby Bath

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted baby bath stand for a mother with cerebral palsy. The individual bought a plastic baby bath, but she couldn’t use this in the bottom of the main bath as she couldn’t bend over far enough from a kneeling position. The baby bath stand/platform was made from marine-grade plywood and spray-painted with white enamel to waterproof it. This rests over the main bath, with timber stops underneath to keep it in position. There is a h

Swivel-Bather

The Swivel-Bather is a bath seat designed for use by individuals with mobility disabilities. This seat fits securely over any standard bathtub and consists of a molded seat with aluminum armrests affixed to a PVC resin tubing base. The seat rotates 360 degrees and can be locked in any of four positions. The seat back folds and locks for storage and transport. The unit can be removed to allow the tub to be used for unassisted bathing. OPTIONS: Detachable seatbelt. DIMENSIONS: The seat is 18 inche

Swiveling Shower / Bath Seat

The Swiveling Shower/Bath Seat is designed for use by individuals with spinal cord injury or mobility or balance disabilities. This chair-style seat rotates to assist the user in swinging his or her legs into the tub and locks in four positions. The seat attaches to a removable fixed base that is fitted to the bathtub. The unit has a steel frame with a plastic seat with two large openings in the back and drainage holes in the seat. DIMENSIONS: The seat is 15 inches square and the unit fits tubs

Teak Stool For Shower Or Garden

The Teak Stool for Shower or Garden is a bathtub or shower stool designed for use by individuals with balance disabilities or arthritis. Handcrafted in Costa Rica of top-quality, sustainably-harvested American Eco-Teak, this rectangular stool has a slatted seat for drainage and is equipped with a slatted storage shelf under the seat. This stool can also be used outdoors as a garden stool.. DIMENSIONS (WxDxH): 19 x 16 x 16 inches. CAPACITY: 250 pounds. COLOR: Teak.

Todd Bath Seat

CUSTOM ADAPTATION PURPOSE: To provide a child with global developmental delays and low muscle tone with appropriate seating and positioning for bathing. The chair is made of PVC pressure pipe and fittings, with a seat and back of outdoor fabric. The seat is also equipped with a webbing pelvic strap and crotch strap. The base frame is fitted with suction cups for security and stability. The seat back is fixed at 90 degrees to the seat and the entire seat unit can be reclined from 32 to 50 degree

Transfer Benches (Models K10366 & K11119)

Transfer Benches, Models K10366 & K11119, are bath seats designed for persons with physical disabilities using wheelchairs. The unique design allows individuals to slide from a wheelchair into the tub. The backrest can be flipped for either right or left setup and a push-button height adjustment and rubber non-slip feet provide additional stability. Seats come in either padded or solid polyethylene versions. DIMENSIONS: Seat height adjusts from 17.5 to 22.5 inches. Seat measures 16.5 x 27 in

Tromode Bathboard

The Tromborde Bathboard is a bath seat designed for use by individuals with lower extremity, mobility, or balance disabilities or arthritis. Available with four or six slats in the seat, these seats are made of polypropylene and PVC plastics, and the slats are reinforced with treated wood. Four clamps on the underside of the bathboard enable it to be adjusted to fit the internal width of the bathtub. Corrosion resistant materials used in all fittings. Thermoplastic elastomer (TPE) corner mountin

Tub Frame.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Tub frame serves as a bathboard, allowing a parent to bathe the child without straining to lift it out of a deep the bathtub. Instructions for constructing aluminum or wooden models of a tub frame. The aluminum frame is made with 1 1/2 inch diameter aluminum tubing, welded together to form a rectangular frame as wide as the distance from the bathtub wall to the outer edge of the ledge, minus approximately 2 inches, and as long as the tub. Strips of 2 i

Tub Modifications

DO IT YOPURSELF ENTRYPURPOSE: To make bathing safer and more accessible for individuals with mobility disabilities and seniors. This section of a chapter entitled "Bathroom and Washing Up" provides a selection of suggestions for simple ways to make bathtub use safer and more accessible. Included are discussions about installing a hand-held showerhead and grab bars, purchasing and using a bath or shower bench or chair, ensuring sufficient lighting, installing anti-scalding devices, and adapting s

Tubby Ii Folding Bath Bench (Series 310)

The Tubby II Folding Bath Bench, series 310, is a bath seat designed for use by individuals with mobility, balance, or lower extremity disabilities or arthritis or spinal cord injury. This seat has a height-adjustable folding steel frame and a padded seat with a commode opening to provide access for perineal cleaning, and a sling-style back. Adjustable stabilizers to assist with transfers are attached; a split between the stabilizer and seat allows the shower curtain to close. The armrest doubl

Universal Bath Bench

The Universal Bath Bench is a bath seat designed for use by individuals with mobility and balance disabilities. Available with or without a back, the seat fits in most tubs and shower stalls and can be assembled without tools. A smooth-edge notch on the seat provides placement for a hand-held shower (not included). The all-plastic frame eliminates rusting and the height adjusts by turning the leg base. DIMENSIONS (HxDxW): 17.5 x 18 x 21 inches without back; 29.5 x 18 x 21 inches with back. The

Versabathseat

The VersaBathSeat is a bath seat designed for use by individuals with mobility disabilities. The unit is adjustable and clamps to most bathtubs, locking with a large adjustment knob. The seat rotates 90 degrees to accommodate both right and left entry and enabling the user to sit on the seat outside the tub and rotate to enter; the process is reversed for exiting the tub. Handles on each side of the seat aid in transfers. This lightweight unit folds for transport and storage. OPTIONS: Hygenic sp

 
Processing...


Driving Walking/Biking Public Transit  Get Directions