The 1.5-inch Slide Bracket, model AB-1530, and the 1.5-inch ABS Spacer Plate, model AB-1815, are mounting hardware components designed for anchoring removable postural supports to solid seat and back panels. The Slide Bracket includes an F44-0476 Knob. The Spacer Plate is used to protect upholstery and ease insertion and removal of the bracket.
The 3-inch 90-degree Bracket, model LB-3030, and the 6-inch 90-degree Bracket, model LB-6060, are stainless steel brackets designed for constructing one-piece seating systems, attaching seats and backs together, or mounting lateral hip guides. The brackets have slotted holes for assembly into T-nuts after upholstery.
Adjustable Brackets are multi-hole brackets used in conjunction with seat hooks to enable a variety of seat positioning in wheelchairs. They are made of 11 gauge stainless steel with a 35 degree angle and available with 2, 3 4, 6, or 8 holes. Also available is an 8 hole, 2 inch extra long model. COLOR: Black.
Adjustable-Drop Hardware Kits are seating hardware general designed to attach drop seats to wheelchairs. The kits include four J-brackets, four L-brackets, and screws and locking nuts needed to adjust the brackets and to secure the brackets to the Drop Seat (see separate entry). The hardware in the Kits can be raised and lowered to adjust the Drop Seat. DIMENSIONS: Model 32517 fits chairs with 7/8-inch tubes and model 32518 fits chairs with one-inch tubes.
Complete line of hardware for attaching seating components to wheelchairs. Includes seat and back hooks, trunk support brackets, abductor brackets, rail clamps, head and footrest brackets, power wheelchair control box brackets, and fastening hardware.
The Armrest Fixed Bracket, model 31897, is an add-on armrest bracket designed to allow any tray to be attached to wheelchairs. The 1/8-inch steel bracket has a baked epoxy finish. INSTALLATION: The bracket is attached to the underside of the tray using the included hardware; the tray is then installed on a wheelchair by sliding the bracket over any standard or padded armrest. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 days from the date o
The Armrest Flip-Away Bracket, Model 31901, is a bracket designed to connect trays to wheelchairs and allow the trays to be flipped up 90 degrees. The bracket is 1/8-inch steel with a baked epoxy finish and includes an aluminum flip bar and spacers. INSTALLATION: The bracket is attached to the bottom of the tray with the included hardware; the bracket slides over any standard or padded armrest. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 d
The Bi-Angular Back Brackets are stainless steel brackets designed for attaching two solid back sections at 160- (model BB-6060), 165- (model BB-6065), 170- (model BB-6070), or 175- (model BB-6075) degree angles.
The BTS/STS Custom Fixtures and Bending Tool are a ball and rod fixture for STS lateral trunk support or slim line fixture for BTS lateral trunk support. They have an 18 inch rod which can be custom bent and cut. The bending tool may be clamped in a vice and used to shape the rods.
The Drop Brackets and Hooks are stainless steel drop hooks designed for mounting seats and backs into tubular frame bases. The "L" brackets allow angle adjustment with 1, 3, 5, or 7 holes. DIMENSIONS: 1-, 2-, and 3-inch deep Drop Hooks are available available for 7/8 or 1 inch diameter tubing, with spacers for 1/2 inch increments.
The Drop Seat Base ($42.50) and Hardware ($169) are a combination solid seat insert and adjustable hook hardware designed to fit 7/8 or 1 inch diameter wheelchair seat rails. Gravity hook assemblies allow automatic locking of the seat base onto the frame. It requires cutting of the plate to accommodate wheelchair cross-frame tubes, and drilling to mount hardware in appropriate locations.
The Fixed and Swing-Away Drop Locks are stainless steel hardware designed for stabilizing seats and backs mounted on tubular frames with drop hooks (see separate entry). The locks will fit 7/8 and 1 inch diameter tubing. Three styles are available: the Drop Stop with no tab, Swing-away Drop Lock with pivoting tab, and Drop Lock tab with fixed tab.
Fixed-Drop Hardware Kits are seating hardware general designed to attach drop seats to wheelchairs. The kits include four drop hooks, eight washers, and eight socket head screws. DIMENSIONS: Models 32617 and 32603 create a one-inch drop. Models 32618H and 32604H create a two-inch drop. Models 32542H and 32543H create a three-inch drop. Models 32617H, 32618H, and 32542H fit chairs with 7/8-inch tubes. The other models fit chairs with one-inch tubes.
Abductor pad available in 2 sizes: 3 1/2 inches wide by 3 inches high by 5 inches deep, and 2 inches wide by 3 inches high by 3 1/2 inches deep. Mounts to underside of solid seat with flipdown or slide-out hardware to allow transfers.
The Lateral Extension Bracket is torso support hardware designed for individuals with neurological or severe physical disabilities or cerebral palsy. The bracket expands the range in which seating supports can be adjusted laterally. The unit is attached at the end of the adjustment slot of the existing trunk lateral brackets and provides almost 3 extra inches of width adjustment for growing children and other individuals who need extra expansion of their seating system. This bracket bolts to mo
The Lateral Thoracic Pad Assembly, model ASTP, is a lateral trunk support designed to provide support to the sides of the upper body area. Stainless steel slide brackets (included) are used for mounting the pads to a solid back panel. A knob on the bracket permits easy removal. The pads are cold rolled steel, bent to 5 inch radius, with captive fasteners. These can be ordered unpadded or with 1/4-inch closed-cell foam upholstered with neoprene rubber bonded to a nylon terry cloth slip cover. SIZ
Heavy duty adjustable hardware system for positioning devices in close proximity to user. Ball joints allow angulation but tighten securely to maintain position. Includes table mount bracket, quick tightening handle, terminating plate for keyboard evaluation.
The Miller's Mounting Hardware Components are designed for affixing wheelchair accessories to solid seat and back panels or to 7/8 and 1 inch wheelchair frame tubing. Fixed, swingaway, and adjustable type clamps and brackets are available. COLOR: Silver or black chrome finish.
Mounting Brackets and Trunion Brackets are interfacing hardware designed for mounting seating systems on a variety of mobility bases. Quick release or permanent mounts are available. The brackets ($25) are for mounting on wood or aluminum shells (see related entry) and come in two sizes: 7/8 inch and 1 inch. The trunion mounts ($58) are available in the same sizes.
The NE-AT Headrest Bracket is headrest mounting hardware designed for people with neurological or mobility disabilities, spinal cord injury, cerebral palsy and other individuals who need adjustable head support. This hinged bracket has 0.25-inch countersunk mounting holes spaced 1 inch apart, with a spring loaded crank handle for tightening in tight spaces.
The NE-AT Quick Release Mini Trap Assembly is a a wheelchair mounting bracket that can support an armrest, a drink holder, a tray, or a laptop computer mount. This small, strong quick-release bracket comes in two versions, angle adjustable or not angle adjustable, and it has optional locking pins. DIMENSIONS: 2 x 2 x 0.75 inches.
The NE-AT UseR Adjustable Lateral (NE-ATURAL) Bracket Mount is lateral trunk support hardware designed for use by individuals with neurological or severe physical disabilities or cerebral palsy. This width-adjustable lateral bracket mount interfaces with most commercial and custom seating systems and converts most commercial and custom lateral brackets into lateral brackets that can be adjusted in width by the user or caregivers to make room for winter jackets or sweaters. Existing swing away o
The NE-AT YA (Yet Another)Tray Mounting Bracket is lapboard mounting hardware designed for use with wheelchairs. The YA Bracket converts most commercial trays (Pin Dot, XL, Avanti, Invacare, etc.) from the existing slide-on or clamp style armrest mounting to a four bar linkage type clamp. This type of mounting can extend the life of the existing armrest pads, provide a stronger hold, and accommodate different size wheelchairs.
Positioning Hardware is seating hardware general designed for attaching positioning aids to wheelchairs. Available items include two-, four-, six-, and eight-hole adjustment hooks; drop hooks; drop hooks for thigh pad inner mount; drop hooks for thigh pad outer mount; side, bottom, and parallel flanges; latch tabs; universal rear bracket; and a swing tab U-bracket. Also available is a seatlock; a seatblock; a headrest mounting plate; a child's headrest support; an adult headrest support; and six
Mounting clamps for removing solid wheelchair seat and back. Attach to wheelchair frame. Keeps wheelchair seat and back securely in place. Twist the lock and both seat and back slide out to fold the wheelchair. Black finish. Available in 3/4 inch, 7/8 inch or 1 inch sizes. .
The Quick Release Hardware Kits are silver or black chrome plated hardware sets for mounting seat or back accessories to 7/8- or 1-inch tubing wheelchair frames. The kits include frame clamps with lugs, quick release brackets with spring-loaded knobs, and T-nuts and bolts for mounting to solid seat or back panels. Components may also be ordered separately.
Complete line of seating hardware for mounting backs, seats, lateral trunk supports, abductors, headrests, leg and footrests in wheelchairs and other mobility bases. Adjustable and non-adjustable, knob-release and drop hook styles. May be ordered in complete kits or by individual components. Optional components $93.00 to $2.00.
The Seat-to-Back Brackets are stainless steel brackets designed for rigidly attaching a solid seat and back to each other at 80-degree (model BS-6080), 85-degree (model BS-6085), 90-degree (model BS-6090), 95-degree (model BS-6095), or 100-degree (model BS-6000) angles.
Seating Hardware is designed for use with wheelchairs. This hardware is made of steel and includes 90-degree brackets and J-hooks (sold separately). DIMENSIONS: All hardware has 0.5-inch spacing, COLOR: Black.
Seating Hardware are components for seating systems that include: 7 types of head and neck supports, 5 models of outer pommel supports, 2 inner pommel support, anterior stop bars, 10 footrest bracket options, 25 suspension hook options, slide brackets, strap hooks, tray brackets, 2 types of headrest hardware, single end button locks, removable lateral hardware, laterals, box seat hardware, solid seat and back brackets, solid seat and back hinges, kids seat bracket, and a drop away pommel.
The Sliding Headrest Bracket is headrest mounting hardware designed for people with neurological or mobility disabilities, spinal cord injury or cerebral palsy. It is added to a headrest on a seat or wheelchair to enable headrest adjustments. This slotted interface bracket allows the headrest to be offset to either side, with infinite lateral adjustment up to 2 inches for an Otto Bock or NE-AT Headrest Bracket (see separate entry). This bracket attaches to the seating system using the existing h
Custom size solid back with 1 inch medium density foam on 1/2 inch birch plywood. Upholstered with cover foam and vinyl cover. T-nuts for hardware attachment and headrest mounting. Custom foams available. Modifications available include curved solid back and I-back cutout. May be ordered without aluminum hardware, or mounted to chair with velcro loops, cinch straps, stationary knob-release hardware, adjustable knob-release hardware, non-adjustable drop hooks, or adjustable drop hooks. Hardware m
Custom size solid seat with 1 inch medium density foam on 1/2 inch birch plywood. Upholstered with cover foam and vinyl cover. T-nuts for hardware attachment and abductor mounting. Custom foams available. Modifications available include anti-thrust seat, leg length discrepancy, and built-in abductor. May be ordered without aluminum hardware, or mounted to chair with cinch straps, stationary knob- release hardware, adjustable angle knob-release hardware, non- adjustable drop hooks, or adjustable
The Universal Bracket System is a set of brackets designed for mouting trays and lapboards on wheelchairs. These lightweight brackets are height- and width-adjustable to fit any wheelchair with standard arms. The rust- and corrosion-resistant brackets are removable for transfers and emergencies and they feature safety stops to prevent the tray from being pushed into the user.
Three-piece headrest with center pad and two adjustable side pads. Standard pad sizes: center 4 inches wide by 6 inches high, side pads 4 inches wide by 2 inches high. Custom sizes available. Center pad has occipital shelf or can be ordered flat. Mounting hardware allows adjustment of side pad depth, angle, and width, and adjustment of entire headrest in height, forward/back, and angle. Attaches to solid back.
Pads are foam padded plywood, covered with naugahyde. Full side pads are 4 inches by 9 inches or 4 inches by 11 inches. Deep curved pads in 3 sizes: 3 inches by 5 inches, 4 inches by 6 inches, 6 inches by 10 inches. Mount to solid backs with angle brackets, or to seats with offset brackets or mounting rail brackets. Custom foam and pad sizes available. Full side pads available in 12 colors, curved pads in black only.
Pads are foam padded plywood, covered with naugahyde. Oval shaped pads in 3 sizes: 4 inches by 5 inches, 4 inches by 6 inches, and 5 inches by 7 inches. Rectangular pads are 4 inches by 6 inches. Deep curved pads in 3 sizes: 3 inches by 4 inches, 4 inches by 4 inches, 6 inches by 6 inches. Mount to solid backs with offset brackets, angle brackets, or mounting rails. Fixed or removeable. Custom foam and pad sizes available. Oval and rectangular pads available in 12 colors, curved pads in black on