Lapboard Mounting Hardware

Results: 29

"u" Adjustable Width Tray Slide Bracket Attaching System (Model 32798)

The "U" Adjustable Width Tray Slide Bracket Attaching System, model 32798, is lapboard mounting hardware designed to secure trays to wheelchairs. These brackets enable a tray (not included) to slide on to the armrests from the front and the configuration of the bracket enables it to be attached to the underside the of the tray and wrap around standard wheelchair armrest pads and attached to the underside of the armrest (mounting hardware is not included). These brackets can be mounted inside or

"z" Tray Slide Bracket Attaching System (Model 32799)

The "Z" Tray Slide Bracket Attaching System, model 32799, is lapboard mounting hardware designed to secure trays to wheelchairs. These brackets enable a tray (not included) to slide on to the armrests from the front. and the configuration of the bracket enables it to be attached to the underside of standard wheelchair armrest pads and the underside of the tray (mounting hardware is not included). A hook-and-loop strap attaching system (not included) may be used in conjunction with these brackets

Adjustable Height Channel Bracket Attaching System (Models 31897A & 31901A)

The Adjustable Height Channel Bracket Attaching System is lapboard mounting hardware designed to secure trays to wheelchairs. These heavy-duty steel sliding spacers include all required mounting hardware for attaching to a tray (not included) and enable trays to slide on to the armrests from the front. The fixed braket, model 31897A, may be used with full-size and armrest-style trays and the flip-away bracket, model 31901A, is designed for use with armrest-style trays. The flip-away bracket perm

Armrest Fixed Bracket (Model 31897)

The Armrest Fixed Bracket, model 31897, is an add-on armrest bracket designed to allow any tray to be attached to wheelchairs. The 1/8-inch steel bracket has a baked epoxy finish. INSTALLATION: The bracket is attached to the underside of the tray using the included hardware; the tray is then installed on a wheelchair by sliding the bracket over any standard or padded armrest. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 days from the date o

Armrest Flip-Away Bracket (Model 31901)

The Armrest Flip-Away Bracket, Model 31901, is a bracket designed to connect trays to wheelchairs and allow the trays to be flipped up 90 degrees. The bracket is 1/8-inch steel with a baked epoxy finish and includes an aluminum flip bar and spacers. INSTALLATION: The bracket is attached to the bottom of the tray with the included hardware; the bracket slides over any standard or padded armrest. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 d

Attaching Hardware Kit (Model 31096H)

The Attaching Hardware Kit, model 31096H, is lapboard mounting hardware designed to attach lapboards and trays to wheelchairs. This kit includes four truss head phillips screws, four mushroom head T-nuts, and four plain T-nuts and provides sufficient hardware to attach two clamps or brackets to a tray (tray not included).

Attaching Hardware Kit (Model 33066)

The Attaching Hardware Kit, model 33066, is lapboard mounting hardware designed to attach lapboards and trays to wheelchairs. This kit includes four 10-24 x 3/8 inch flat socket head screws, four 10-24 x 0.5 inch flat socket head screws, and four plain T-nuts and provides sufficient hardware to attach two clamps or brackets to a tray (tray not included). COLOR: The screws are black.

Deluxe Reversible Extenda Arm (Model 31094)

The Deluxe Reversible Extenda Arm, Model 31094, is lapboard mounting hardware designed for use with wheelchairs. The tubulat steel telescoping arm mounts under the armrest on standard padded or desk-length wheelchair arms to provide up to 8.5 inches of additional support for trays in front of the armrest. The device can also br retracted under the armrest overhang. This deluxe heavy duty version is reversible for use on the right or left side. WARRANTY: The manufacturer warrants this product to

Direct Mount Clamp (Model 247-Dm100)

The Direct Mount Clamp, model 247-DM100, is lapboard mounting hardware designed specifically for attaching the MYDESC desktop lapboards (see separate entries) to wheelchairs without armrests or without removable armrests. This metal clamp block has a tightening knob for use with tube framing from 0.75 to 1.25 inches in diameter. The device can be mounted either vertically or horizontally, and also features an 0.83-inch cylinder slot to mount the lapboard, or umbrellas, directly onto the wheelcha

E-Z-Lock Tray Clamp (Model 31096)

The E-Z-Lock Tray Clamp, Model 31096, is lapboard mounting hardware designed to secure lapboards and trays to wheelchairs. This clamp is designed to attach any tray to any wheelchair arm using a simple locking motion. OPTION: An attaching hardware kit for securing the clamp to the tray is available separately ($10.50). WARRANTY: the manufacturer warrants this product against defects in workmanship and materials for 90 days from the date of purchase.

Miller's Mounting Hardware Components

The Miller's Mounting Hardware Components are designed for affixing wheelchair accessories to solid seat and back panels or to 7/8 and 1 inch wheelchair frame tubing. Fixed, swingaway, and adjustable type clamps and brackets are available. COLOR: Silver or black chrome finish.

Moss Lap Tray

The Moss Lap Tray is a molded plastic lapboard designed to mount to Otto Bock MOSS II seating system armrests (see separate entry) with the U-shaped aluminum frame. Fits 9.5, 11.5, 13.5, 16, and 18 inch seating systems.

Mount 'n Mover

The Mount 'n Mover is a wheelchair mounting kit for communicators, tablet or laptop computers, or a camera mount for wheelchair designed for use by individuals who use wheelchairs. The device can also be used to mount trays, easels, reading stands, remote controls and more. Available in single- or dual-arm horizontal models, the device is equipped with a quick-release mounting plate offering 0 to 90 degrees of tilt, a paddle to unlock the wrist joint to rotate the attached tray or device, and a

Mydesc Direct Mount Models (Models Dm500 & Dm900)

The MYDESC Direct Mount Model 350-DM500, and the 90 Degree Direct Mount Model with Elbow Assembly 350-DM900, are mounting hardware for the MYDESC lapboards to clamp onto a wheelchair's frame or armrest. They include clamps and an adjustable MYDESC lapboards. The clamps will accommodate tubing from 3/4 to 1.25 inches in diameter, and both can be mounted either horizontally or vertically. Model 350-DM900 provides more height and distance from the wheelchair user's body.

Ne-At Quick Release Mini Trap Assembly

The NE-AT Quick Release Mini Trap Assembly is a a wheelchair mounting bracket that can support an armrest, a drink holder, a tray, or a laptop computer mount. This small, strong quick-release bracket comes in two versions, angle adjustable or not angle adjustable, and it has optional locking pins. DIMENSIONS: 2 x 2 x 0.75 inches.

Ne-At Ya (Yet Another) Tray Mounting Bracket

The NE-AT YA (Yet Another)Tray Mounting Bracket is lapboard mounting hardware designed for use with wheelchairs. The YA Bracket converts most commercial trays (Pin Dot, XL, Avanti, Invacare, etc.) from the existing slide-on or clamp style armrest mounting to a four bar linkage type clamp. This type of mounting can extend the life of the existing armrest pads, provide a stronger hold, and accommodate different size wheelchairs.

Neasy Swing Away Aug Com Mounting System

The NEasy Aug Com Swing Away Mounting System is a wheelchair mounting kit for communicators or lapboard mounting hardware designed fo use by individuals who use wheelchairs. This compact, heavy-duty modular mounting system for small to large devices or trays can be released and swung away by the user with only one or two pounds of pressure. Each swing away joint automatically locks into position with a stainless steel, spring-loaded pin at 0 degrees, 90 degrees (optional), and 180 degrees (optio

Quad Care Attaching System (Model 31878)

The Quad Care Attaching System, Model 31878, is lapboard mounting hardware for use by people who are quadriplegics or who have upper extremity disabilities. The kit allows the user to attach a tray or lapboard to wheelchair armrests by using clear vinyl thumb loops to streetch elastic bands over baked epoxy metal attaching pegs. The elastic loop stretches around the armrest and the pull-ring hooks onto metal bracket. The kit includes elastic loops, vinyl pull-rings, and metal brackets with atta

Seating Hardware

Seating Hardware are components for seating systems that include: 7 types of head and neck supports, 5 models of outer pommel supports, 2 inner pommel support, anterior stop bars, 10 footrest bracket options, 25 suspension hook options, slide brackets, strap hooks, tray brackets, 2 types of headrest hardware, single end button locks, removable lateral hardware, laterals, box seat hardware, solid seat and back brackets, solid seat and back hinges, kids seat bracket, and a drop away pommel.

Steel Channel Bracket Attaching System (Model 30300)

The Steel Channel Bracket Attaching System, model 30300, is lapboard mounting hardware designed to secure armrest-style trays to wheelchairs. This heavy-duty steel bracket includes all required mounting hardware for attaching to a tray (not included) and enables a tray to slide on to the armrests from the front. This flip-away bracket fits standard wheelchair armpads and permits chair entry and exit without removing the tray. DIMENSIONS: Fits 1 1/8-inch high standard pads. WARRANTY: This product

Telescoping Mount Hardware For Wheelchair Tray (Model 11.1)

The Telescoping Mount Hardware for Wheelchair Tray, model 11.1, is lapboard mounting hardware designed to secure trays to wheelchairs. This system includes powder coated arms, tubes, rings and poly-lock pegs to enable a lapboard or tray to be mounted to a wheelchair. WEIGHT: 15 pounds.

Top Drop Clamp Attaching System (Model 31070)

The Top Drop Clamp Attaching System, model 31070, is lapboard mounting hardware designed to secure trays to wheelchairs. This system enables the tray (not included) to be positioned straignt down on the armrests and requires only 3/8-inch clearance under the armpad which enables the tray to be used when a joystick or other control is mounted next to the armpad. The tray locks on with the turn of a handle. Made of glass-filled nylon, the clamps adjust to fit arms of different widths and pads of d

Tray Bracket (Model Tr30 & Tr31) And Tray Bracket Receptacle (Tr32)

The Tray Bracket ($50, model TR30 & TR31 for left and right armrests, respectively) and the Tray Bracket Receptacle ($70, TR32) are designed to attach a tray to the armrest of a wheelchair or seating system. The units are compatible with many armrests. The bracket is mounted on one armrest and the receptacle is mounted on one side of tray. Support on both sides is recommended for heavy duty applications.

Tray Clamps (Model 31086)

Tray Clamps, Model 31086, are lapboard mounting hardware designed to mount trays and lapboards to wheelchairs. These clamps provide a means of locking trays to wheelchair frames using one lever motion. WARRANTY: The manufacturer warrants this product to be free of defects in materials and workmanship for 90 days from the date of purchase.

Tray Stay Clamping System (Model 31085)

The Tray Stay Clamping System is lapboard mounting hardware designed to attach trays and lapboards to wheelchairs. The modular clamping system allows the user to adjust the height and position of the tray by attaching the base channel system to the tray and inserting the appropriate spacers. The clamps are secured by an attachment knob. The system can be used to mount trays directly to the wheelchair armrest and crossbar, the armrest pad, or to the manufacturer's Extenda-Arms, which provides ad

Trays & Hardware

The Tray and Hardware are a lapboard and mounting hardware designed for wheelchairs. The polycarbonate tray may be ordered with or without flip locks. Requires cutting out for trunk, sanding edges, and mounting of flip locks. OPTIONS: Tray elbow protection pads also available as individual or full pad. Mounting hardware may be ordered separately. DIMENSIONS: 18 x 24 inches (Small) and 24 x 27 inches (Large).

Tube Arm Bracket Attaching System (Models 31902 & 31907)

The Tube Arm Bracket Attaching System is lapboard mounting hardware designed to secure trays to wheelchairs. These brackets enable a tray (not included) to slide on to tube-style armrests from the front. The brackets are attaached at both ends of the tube, enabling the tray to be attached to the top of the armrests (mounting hardware is not included). hook-and-loop straps (not included) may be used with these brackets for extra stability. OPTIONS: Mounting hardware (no. 31096H).SIZES: Small (no.

Universal Arm Mount (Model 347-Ua503)

The Universal Arm Mount, model 347-UA503, is a mounting clamp for wheelchair accessories designed specifically for attachment of the MYDESC EZ-Removable Arm (see separate entry). This metal clamp block can be used with wheelchair tubing from 0.75 to 1.25 inches in diameter, and provides a 0.78 inch cylinder slot for mounting the EZ-Removable Arm directly to the wheelchair frame. The clamp may be mounted either horizontally or vertically.

Wheelchair Snack Tray (Model 70621-0000)

The Wheelchair Snack Tray, model 70621-0000, is a lapboard designed to clamp to wheelchair tubing to hold snacks and beverages. The tray sticks to a platform by Velcro pads to facilitate removal for cleaning. The try is made of polystyrene; metal parts are epoxy coated. DIMENSIONS: 6.5 x 9.75 inches.

Parent Category: Seating Hardware
 
Processing...


Driving Walking/Biking Public Transit  Get Directions