Lapboards

Results: 157

"u" Adjustable Width Tray Slide Bracket Attaching System (Model 32798)

The "U" Adjustable Width Tray Slide Bracket Attaching System, model 32798, is lapboard mounting hardware designed to secure trays to wheelchairs. These brackets enable a tray (not included) to slide on to the armrests from the front and the configuration of the bracket enables it to be attached to the underside the of the tray and wrap around standard wheelchair armrest pads and attached to the underside of the armrest (mounting hardware is not included). These brackets can be mounted inside or

"z" Tray Slide Bracket Attaching System (Model 32799)

The "Z" Tray Slide Bracket Attaching System, model 32799, is lapboard mounting hardware designed to secure trays to wheelchairs. These brackets enable a tray (not included) to slide on to the armrests from the front. and the configuration of the bracket enables it to be attached to the underside of standard wheelchair armrest pads and the underside of the tray (mounting hardware is not included). A hook-and-loop strap attaching system (not included) may be used in conjunction with these brackets

4 D Lapboard Adjustable Bracket Mount (08-3000 Series)

Lapboard adjusts vertically, laterally, front and rear. Adjustable tilt. 1/2 inch clear acrylic. Sizes: 24 by 15 inches (08-3111), 22 by 13 inches (08-3211), 20 by 11 inches (08-3311). Also available in 1/4 inch clear acrylic ($300.00). Modifications and accessories: 3/8 inch acrylic, colored acrylic, 1/4 inch ABS plastic, 1/4 inch lexan, cutouts, special widths and depths, aluminum rim, plastic rim, communication overlay.

Abs Plastic Tray (Models 1719, 2121, & 2124)

Molded ABS Lapboard with an edge rim. Three sizes: 17 1/2 by 19 1/2 inches; 21 1/2 by 21 inches; and 21 1/2 by 24 inches. Attaches to wheelchair armrest with bayonet style hardware, adjustable for different wheelchair widths. Accessories: clear (PET) shield that snaps onto the tray for use with symbol charts. The shield becomes scratched with use and must be replaced when it becomes difficult to see through.

Abs Plastic Trays

ABS Plastic Trays can be used on wheelchairs and prone standers. The front edge and sides have a rim to prevent objects from falling off the tray. Models are available with or without cutouts. Tray glides available. DIMENSIONS (WxD): 20 x 20 inches with a 5 inch cutout (Child); and 24 x 20 inches with a 6 inch cutout (Adult). COLOR: Beige.

Activity Lap Tray (Model 17698)

The Activity Lap Tray, model 17698, is a lapboard or lap tray designed for use by children ages 3 years and above and adults with mobility disabilities. Made of polypropylene plastic, this tray fits over the lap when the user is seated. The Activity Lap Tray consists of a firm flat tray between two side pockets that extent below the tray and act as the supports when the device in placed on the lap. On the tray, the user can write, play games, create crafts and perform other activities. The side

Activity Tray Swivels (Model 70675-0000)

The Activity Tray Swivels, model 70675-0000, is a swing away lapboard designed to be attached to the tubing on most wheelchairs. The tray is made of birchwood and has a clear non-slip finish on the top surface. The tray has a lip to keep items from rolling off. It is supplied with a flat triangular aluminum support and a screw-mounted 3/8-inch long aluminum spindle at one corner. DIMENSIONS: 13 x 17 inches.

Adapt-A-Tray

The Adapt-A-Tray is a laptray designed to provide upper body positioning for people with spinal cord injury or neurological or severe physical disabilities who use wheelchairs. The system incorporates a tray with a hole-punched surface to enable attachment of brackets and padded blocks to aid in positioning of the upper extremities, equipment, communication aids, or activities. The starter kit includes one tray with holes, one overlay to create a smooth tray surface, four 45-degreec attachment b

Add-On Tray, The

DO IT YOURSELF ENTRY --- PURPOSE: To keep crayons, drinks, and other items within reach of a wheelchair user. The add on tray shown was custom built of 3/8-ply to slide over the standard wheelchair tray. Multiple compartments allow her to keep crayon colors and other small items organized and hold drinks. TITLE: The Add-On Tray. WEB SITE: Workshop Solutions at http://www.workshopsolutions.com/COMPLETE/ad_on_tray.htm. REF: The originator, Tom Jeary, can be contacted at tlj@golden.net.

Adjustable Channel Bracket Mount For Lapboard (Model 08-2000)

Lapboard with adjustable channel, mounts to arm of wheelchair with bracket. 1/4 inch clear acrylic. Sizes: 24 by 24 inches with 15 by 9 inch body cutout, 22 by 22 inches with 13 by 7 1/2 inch body cutout, 20 by 20 inches with 10 by 6 inch body cutout. Modifications and accessories: 3/8 inch acrylic, colored acrylic, 1/4 inch lexan, 1/4 inch ABS, special cutouts, special widths and depths, aluminum rim, plastic rim, communication overlay.

Adjustable Height Channel Bracket Attaching System (Models 31897A & 31901A)

The Adjustable Height Channel Bracket Attaching System is lapboard mounting hardware designed to secure trays to wheelchairs. These heavy-duty steel sliding spacers include all required mounting hardware for attaching to a tray (not included) and enable trays to slide on to the armrests from the front. The fixed braket, model 31897A, may be used with full-size and armrest-style trays and the flip-away bracket, model 31901A, is designed for use with armrest-style trays. The flip-away bracket perm

Adl Lap Tray (Model Nc94114)

The ADL Lap Tray, model NC94114, is a lapboard designed to provide writing, eating, and activity space for people who use wheelchairs. The tray's surface is impregnated with melamine, making it waterproof and easy to clean. The tray also features a depressed edge to prevent objects from rolling off, rounded corners, and Velcro straps to secure the tray to the wheelchair. DIMENSIONS: 23.5 x 22 x .25 inches.

Adult Wheelchair Tray (Model 766)

The Adult Wheelchair Tray, model 766, is an adjustable lapboard designed to fit all size wheelchairs. The top is mar-resistant wood grain laminate and has rims on three side. DIMENSIONS: 23 1/2 inches wide x 21 1/2 deep x 1/2 inch thick, cut out size 14 1/2 x 8 3/4 inches, rims 1/2 inch high.

Alimed Inflatable Lap Buddy (Model 77338)

The AliMed Inflatable Lap Buddy, model 77338, is a wheelchair lap board, positioning pad and wandering patient system designed to prevent wheelchair users with Alzheimer's disease or cognitive disabilities and balance or lower extremity disabilities from rising without assistance. It provides upper body support and posture assistance as well as a comfortable forearm and wrist/hand rest. The Inflatable Lap Buddy can support light activity, such as reading. It inflates quickly with a hand inflator

Armrest Fixed Bracket (Model 31897)

The Armrest Fixed Bracket, model 31897, is an add-on armrest bracket designed to allow any tray to be attached to wheelchairs. The 1/8-inch steel bracket has a baked epoxy finish. INSTALLATION: The bracket is attached to the underside of the tray using the included hardware; the tray is then installed on a wheelchair by sliding the bracket over any standard or padded armrest. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 days from the date o

Armrest Flip-Away Bracket (Model 31901)

The Armrest Flip-Away Bracket, Model 31901, is a bracket designed to connect trays to wheelchairs and allow the trays to be flipped up 90 degrees. The bracket is 1/8-inch steel with a baked epoxy finish and includes an aluminum flip bar and spacers. INSTALLATION: The bracket is attached to the bottom of the tray with the included hardware; the bracket slides over any standard or padded armrest. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 d

Attaching Hardware Kit (Model 31096H)

The Attaching Hardware Kit, model 31096H, is lapboard mounting hardware designed to attach lapboards and trays to wheelchairs. This kit includes four truss head phillips screws, four mushroom head T-nuts, and four plain T-nuts and provides sufficient hardware to attach two clamps or brackets to a tray (tray not included).

Attaching Hardware Kit (Model 33066)

The Attaching Hardware Kit, model 33066, is lapboard mounting hardware designed to attach lapboards and trays to wheelchairs. This kit includes four 10-24 x 3/8 inch flat socket head screws, four 10-24 x 0.5 inch flat socket head screws, and four plain T-nuts and provides sufficient hardware to attach two clamps or brackets to a tray (tray not included). COLOR: The screws are black.

Bean Bag Dinner Tray

The Bean Bag Dinner Tray is a lap tray designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. Designed to rest directly on the user's lap, this plastic tray attaches to a bean bag with a hook and loop strap. The removable bean bag provides a form fitting and comfortable support on the user's lap. The tray's raised edges are intended to stop items such as cups and plates from accidentally sliding off the tray. DIMENSIONS (WxD): 16 x 12 inches. COLOR:

Better Board Slant Boards

The Better Board Slant Board is a bookholder and table top writing desk designed for use by individuals who use wheelchairs or who have upper extremity. It is made of durable corrugated plastic, it has attached plastic clamps that hold paper well and includes non-slip feet to help it stay in place while in use. It has a 20-degree angle and can be used for reading, writing and copying. When not in use, this board folds to a thickness of 0.75 inch for stacking and storing. SIZES: Small and large.

Black Trays

The Black trays are wheelchair lap trays designed for use by individuals who use wheelchairs. These PVC trays are equipped with attached rims and are difficult to crack. SIZES: Infant, child, and adult sizes. COLOR: Black.

Child Wheelchair Tray (Model 766C)

The child wheelchair tray fits all wheelchair sizes. The top is made of mar-resistant wood grain laminate and has a 1/2 inch rim. DIMENSIONS: 21 x 18 x 12.5 inches with a 7.5-inch cut out.

Clear Acryic Wheelchair Tray (Model H1202)

The Clear Acrylic Wheelchair Tray, model H1202, is a lapboard designed for use by individuals who use wheelchairs. Made of clear acrylic, this tray attaches to the wheelchair armrests, has a round torso cutout, and provides a large surface for eating, working, and other activities.

Clear Acrylic Wheelchair Tray (Model 5000)

The Clear Acrylic Wheelchair Tray, model 5000, is a lapboard designed for use with wheelchairs. The transparent acrylic is lightweight and the universal design fits all wheelchairs. The tray attaches with Velcro straps. DIMENSIONS: 23 x 19 x 1/4 inch.

Clear Acrylic Wheelchair Tray (Model 6662)

The Clear Acrylic Wheechair Tray, model 6662, is a lapboard designed for attachment to a wheelchair with Velcro straps. It is transparent, lightweight and has a universal design. DIMENSIONS (LxWxH): 23 x 19 x 1/4 inches. WEIGHT: 3 pounds.

Clear Non-Glare Acrylic Overlay (Models 11D.3A & 11D.3B)

The Clear Non-Glare Acrylic Overlays are designed for wheelchair trays by Consumer Care Products (model numbers starting with 11D, see separate entries). These overlays may be used for tracing activities and protecting communication aids and other accessories. The overlay snaps in and out. DIMENSIONS: Model 11D.3A is 16 x 20 inches; model 11D.3B is 19 x 24 inches. WEIGHT: Approximately 4 pounds.

Cloth Lap Tray.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Overcomes the difficulty of a person in a wheelchair to balance objects on the lap. Cloth tray with stiffened edges can be constructed to provide a flat surface on which to place articles. Stiffened edge serves to prevent things from slipping off the tray. Made of 1 and 1/8 yards of fabric or 1/2 yard each of two contrasting fabrics, velcro, and 1 and 1/8 yard rubber tubing or garden hose. COMMENTS: Simple pattern and instructions for construction are

Collapsible Lap Tray.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Wheelchair lapboard folds and stores on back of chair. Lightweight lapboard attaches to full length wheelchair arms. It folds in half and can be used as a short lapboard, or removes and stored easily on the back of the wheelchair. Includes picture. SKILLS REQUIRED: Woodworking AUTHOR: Bob Warren, UCP of Akron, 318 Water STreet, Akron, OH 330-376-6041. TITLE: Tools, Equipment and Machinery Adapted for the Vocational Education and Employment of Handicapp

Comfort Pad For Economy Molded Lap Tray (Model A707-151)

The Comfort Pad for Economy Molded Lap Tray, model 707-151, is a lapboard overlay designed for use with the Economy Molded Lap Tray (see entry). This pad fits securely within the lip of the tray and is secured with the tray's D-ring straps. The pad has an integral cup/glass recess. OPTIONS: The pad and tray can be purchased separately or as a unit. DIMENSIONS: The pad is 0.5-inch thick.

Comfortline Series

The Comfortline Series are lapboards designed for attaching to wheelchairs. The trays have a rectangular work surface and rounded torso cutout and are fabricated of wood and covered with foam padding and finished with molded satin vinyl. These trays are available in two models: the tray alone or the tray with straps. SIZE: Both models are available in child and adult sizes. DIMENSIONS (WxD): Child-size trays are 20.5 x 18 inches with a 12 x 6 inches torso cutout; adult-size trays are 23.5 x 22 i

Cpsc Wheelchair Trays (Models Lt 01, Lt 03, Lt 11, & Lt 13)

Wheelchair lapboards, ABS plastic. Safety rim around the perimeter keeps articles from sliding off. Inside edge may be modified as required. The tray attaches to any size wheelchair with brackets.

Deluxe Reversible Extenda Arm (Model 31094)

The Deluxe Reversible Extenda Arm, Model 31094, is lapboard mounting hardware designed for use with wheelchairs. The tubulat steel telescoping arm mounts under the armrest on standard padded or desk-length wheelchair arms to provide up to 8.5 inches of additional support for trays in front of the armrest. The device can also br retracted under the armrest overhang. This deluxe heavy duty version is reversible for use on the right or left side. WARRANTY: The manufacturer warrants this product to

Deluxe Wheelchair Tray (Models H1200 & H1201)

The Deluxe Wheelchair Tray is a lapboard designed for use by individuals who use wheelchairs. The wooden tray features extra-wide, screwed-in straps for attaching the tray to the wheelchair armrests, a rounded torso cutout, and a raised lip to prevent items from falling off. DIMENSIONS (WxD): 25 x 22 inches. COLOR: Model H1200 is butternut and model H1201 is rosewood.

Desk Arm / Large Lap Hugger (Models 6515L, & 6517)

The Desk Arm/LargeLap Hugger is a torso support designed to prevent forward leaning by people who use wheelchairs. This foam padded support is covered with wipe-clean vinyl and fits between the wheelchair user and the wheelchair frame and also provides arm support. Notches fit around the armrest posts. DIMENSIONS: Model 6517 fits wheelchairs 18 to 20 inches wide with desk-length arms and model 6515L fits wheelchairs 20 to 24 inches wide.

Direct Mount Clamp (Model 247-Dm100)

The Direct Mount Clamp, model 247-DM100, is lapboard mounting hardware designed specifically for attaching the MYDESC desktop lapboards (see separate entries) to wheelchairs without armrests or without removable armrests. This metal clamp block has a tightening knob for use with tube framing from 0.75 to 1.25 inches in diameter. The device can be mounted either vertically or horizontally, and also features an 0.83-inch cylinder slot to mount the lapboard, or umbrellas, directly onto the wheelcha

Durasoft Half Tray

The DuraSoft Half Tray is a swing-away lap tray designed for use as a wheelchair accessory by individuals with lower extremity or mobility disabilities or spinal cord injury. For those people who do not need the surface area that a full lap tray provides, the DuraSoft Half Tray provides a smaller surface on one side of the wheelchair. It is available in left- and right-handed models. The unit has a rigid insert covered by high resiliency foam with a solid cover. A raised outside edge keeps the u

E-Z-Lock Tray Clamp (Model 31096)

The E-Z-Lock Tray Clamp, Model 31096, is lapboard mounting hardware designed to secure lapboards and trays to wheelchairs. This clamp is designed to attach any tray to any wheelchair arm using a simple locking motion. OPTION: An attaching hardware kit for securing the clamp to the tray is available separately ($10.50). WARRANTY: the manufacturer warrants this product against defects in workmanship and materials for 90 days from the date of purchase.

Economy Molded Lap Tray (Model A70711)

The Molded Lap Tray, model A70711, is a lapboard designed for use by individuals with mobility or lower extremity disabilities who use wheelchairs. The lap tray is designed to enable the user to eat or do other activities from their wheelchair and to provide some protection from spills. The tray fits standard and desk arm wheelchairs and includes a cut-out area to accommodate the torso. Other features include a molded recess area for holding a cup or glass. OPTIONAL: A Comfort Pad (see separate

Econotray Series

The EconoTray Series are lapboards designed for use on wheelchairs. Fabricated of tempered hardboard with a woodgrain vinyl top, the trays are available in five models: the tray only, tray with 3-piece wood rim, tray with straps, tray with rim and straps, and tray with straps, pads, and a back strap. The Juvenile tray has an oblong worksurface, while the other models have a square worksurface. SIZE: The tray with straps, pad, and backstrap is available only in an adult size. The other models com

Enduroline E-Z Lock Quik-Fit Trays (Models 33003P, 33004P, 33005P, 33020P, 33003, 33004, 33005, & 33020)

The Viewline E-Z Lock Quik-Fit Trays are lap trays designed for use with wheelchairs. These trays feature an E-Z Lock Clamping System that adjusts for standard or thick arm pads, enables the tray to slide on to the armrests from the front, and secures the tray with a simple locking motion. These trays are made of melamine-impregnated fiberboard. Models 33003P, 33004P, 33005P, and 33020P have a black PVC rim. The other models do not have a rim. SIZES: Child (fits wheelchairs 12 to 14 inches wide)

Enduroline Plus Trays (Series 31200)

The Enduroline Plus Trays are lap trays designed for use with wheelchairs. These trays are made of melamine-impregnated fiberboard. These moisture-resistant trays can be attached using the E-Z Lock Clamp, Top Drop Clamp, Tube Arm Braxkets (not included), or other attaching system. Models include the tray only, tray with hook-and-loop attaching straps, tray with a PVC rim, and tray with straps and rim. SIZES: Child (fits wheelchairs 12 to 14 inches wide), adult (fits chairs 14 to 17 inches wide),

Enduroline Series

The Enduroline Series are lapboards designed for attaching to wheelchairs. These trays are fabricated of Melamine-impregnated fiber board with a woodgrain vinyl top, and are available in tray only, tray with routed stop groove, tray with anodized aluminum rim, tray with groove and straps, and tray with rim and straps models. All models have a rectangular work surface. SIZES: All models are available in child, adult, and extra-wide sizes. DIMENSIONS (WxD): Child-size models are 20.5 x 18 inches w

Enduroline Top Drop Quik-Fit Trays (Models 33007P, 33009P, 33011P, 33019P, 33007, 33009, 33011, & 33019)

The Enduroline Top Drop Quik-Fit Trays are lap trays designed for use with wheelchairs. These trays feature a Top Drop Clamping System that enables the tray to be positioned straignt down on the armrests and requires only 3/8-inch clearance under the armpad which enables the tray to be used when a joystick or other control is mounted next to the armpad. The tray locks on with the turn of a handle. The Enduroline Trays are made of melamine-impregnated fiberboard. Models 33007P, 33009P, 33013P, a

Enduroline Top Drop Quik-Fit Trays With Control Cutouts (Models 33037, 33038, 33039, 33040, 33041, 3342, 33043, 33044, 33045, 33046, 33047 & 33048)

The Enduroline Top Drop Quik-Fit Trays with Control Cutouts are lap trays designed for use with powered wheelchairs with joysticks and other controllers. These trays feature a Top Drop Clamping System that enables the tray to be positioned straignt down on the armrests and requires only 3/8-inch clearance under the armpad which enables the tray to be used when a joystick or other control is mounted next to the armpad. The tray locks on with the turn of a handle. These trays also feature a cutout

Expandable Tray

The Expandable Tray is a wheelchair lap tray designed for use by individuals who use wheelchairs. The wooden surface provides a large surface support for elbows and forearms, enabling better trunk support. Available with or without mounting clamps, the tray can be used on manual or powered chairs or on standing positioners, and adjusts to various widths. When not expanded, the tray fits through doorways and aisles. SIZES: Medium or large. DIMENSIONS: Each side extension adds 4.5 inches to the wi

Feeder Board Attachment.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Attachment for a wheelchair laptray, used to stabilize dishes and glasses for a user who lacks coordination. The feeder board clamps on top of a regular laptray with medium size C clamps. The dishes, cups and glasses the person uses fit into cutout holes in the board. Topview and sideview diagrams included. SKILLS REQUIRED: Woodworking. AUTHOR: Fahland, B. TITLE: Wheelchair Selection: More Than Choosing a Chair With Wheels. REF:Book: Sister Kenny Insti

Flip Away Half Lap Tray (A7079, A70710, A70712 & A70713)

The Flip Away Half Lap Trays, models A707-9, A70710, A70712 and A70713, are lapboards designed for use by individuals who use wheelchairs. The easy-to-clean plastic trays secure on either the right or left side of a full-length or desk-style upholstered wheelchair arm. These trays offer comfortable support and lift up and out of the way during patient transfers or wheelchair storage. DIMENSIONS (WxD): 13 x 21 inches with a one-inch molded rim and 3.5 inch diameter recessed area for cup or glas

Folding Retractable Tray Table

The Folding Retractable Tray Table is a swing-away lap tray for a wheelchair for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This tray is designed for use with the Pride Mobility Jazzy, Invacare Pronto and Hoveround powered wheelchairs (see separate entries). Custom sizes are available. The table mounts on retractable arm that is mounted on the underside of one of the wheelchair's armrest. If the wheelchair has a joystick or other controller mounted on

Functional Forms Wheelchair Easel / Lap Tray

The Functional Forms Wheelchair Easel/Lap Tray is designed to provide a lightweight alternative to traditional lap trays for wheelchair users. Features include a built-in 20-degree angle, pencil holder/wrist rest, removable carrying strap, magnetic paper holder, and a hidden zippered pouch. This easel also has a water-resistant vinyl or leather covering. WEIGHT: 1 pound.

Invisible Wheelchair Lap Tray (Model 606303)

The Invisible Wheelchair Lap Tray is a clear plastic lapboard designed for use with wheelchairs. Fittings include T-bars, rubber belt fastening straps, and foam padding to protect armrests. The unit fits most standard arm wheelchairs. DIMENSIONS: 22.75 x 22 3/8 inches.

Lap Hugger (Models 6515, 6515M, & 6515N)

The Lap Hugger is a torso support designed to prevent forward leaning by people who use wheelchairs. This soft lap cushion fits between the wheelchair user and the wheelchair frame and also provides arm support. The standard model have notches to fit around the armrest posts. Model 6515N is narrower for easier removal. Both styles have a wipe-clean vinyl cover. DIMENSIONS: Both styles fit 16- to 18-inch wide wheelchairs. The standard model is 4 inches thick. COLOR: Model 6515 is blue and model 6

Lap King Wheelchair Lap Desk

The Lap King Wheelchair Lap Desk is a wheelchair lap tray designed for use by wheelchair users. The Lap King is constructed of a two-sided detachable lap tray made of ABS plastic that is attached to a U-shaped microbead fill cushion. The lap tray is reversible with one side having a flat surface on which the user can write, read or eat; and the other side has a dimpled surface that allows the heat generated by a laptop computer to disperse and the computer to remain cool. Both sides of the lap

Lap Pal With Nylex Cover (Models Msc019038, Msc019037, Msc019032, Msc019035, Msc019030, & Msc019036)

The Lap Pal with Nylex Cover is a lapboard designed for use as a wandering patient system for wheelchair users with Alzheimer's disease or cognitive disabilties. This safety cushion fits snugly across the user's lap and securely against the wheelchair's arms, helping to keep the user from sliding down or getting out of the chair unassisted. The cushion is made of durable, lightweight polyurethane foam covered with Nylex fabric, and provides a resting place for user's arms. The cushion is flame-r

Lap Top Cushion (Series 307010 Through 307014 & 307030 Through 307034)

The Lap Top Cushion is a lap tray designed to provide individuals who use wheelchairs with proper positioning and a work surface. Covered in durable, liquid-proof vinyl, these polyfoam-padded cushions serve as an armrest, a means of carrying personal items, a work surface, and a tool for promoting a more upright sitting posture. Available in three thicknesses, models are offered for wheelchairs with full- or desk-length arms and fit across the user's lap under the chair's armrests. The models fo

Lap Top Tray (Models 8220 & 8221)

The Lap Top Tray is a lap tray designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs or remain seated for long periods of time. These trays prevent forward leaning and provide elbow and arm support, while providing an activity surface. Model 8221 is padded for extra support and to reduce the risk of pressure sores. Model 8220 is clear to promote body awareness. Both models secure to the wheelchair with Velcro straps. DI

Lap Tray

The Lap Tray is designed for use by individuals who use wheelchairs. This waterproof tray has rounded corners, is melamine impregnated for durability, and sealed on both the top and bottom. A depressed edge prevents small objects from rolling off. DIMENSIONS: 23.5 x 22 inches with an abdominal cutout of 15.5 inches wide. COLOR: Woodgrain.

Lapboard.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Lapboard for wheelchair to make it easier to carry items. Instructions are provided on how to properly measure a lapboard for use with a wheelchair. Includes drawing. SKILLS REQUIRED: Woodworking. AUTHOR: Occupational Therapy Service. TITLE: REF: Resource Sheet: Institute of Physical Medicine and Rehabilitation, New York. .

Lapboard.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Provides an attached table surface for a person in a wheelchair, can be used for activities or for arm support. Diagrams and suggested materials for trays; suggested variations include raised edging to keep articles from slipping off board, holes cut in board to stabilize dishes or other items. SKILLS REQUIRED: Woodworking. AUTHOR: Fahland, B. TITLE: Wheelchair Selection: More Than Choosing a Chair With Wheels. REF:Book: Sister Kenny Institute, Minneap

Laplander

The Laplander is a lap tray designed for use by individuals with upper extremity or mobility disabilities. This portable desk has a solid work surface with rounded corners, a cut-out oval handle, and cloth elastic straps to hold materials in place. The base is a cushion made of breathable Neoprene. OPTIONS: Laplighter clip-on light with a flexible gooseneck and replacement straps. DIMENSIONS (WxDxH): 23 x 15.75 x 2.5 inches. COLOR: Natural cherry with a cream cushion or dark cherry with a black

Lapp Topper

The Lapp Topper is a lap tray designed to provide a work or feeding surface for individuals who use wheelchairs. This unit is a portable table that stays steady when placed on the lap. This tray is made of lightweight polystyrene-filledleatherette vinyl, allowing it to contour to the user’s lap. The cup holder and tray surface are made of polypropylene with a removable non-skid mat. The cup holder can be reversed for left- or right-handed use. DIMENSIONS (HxDxW): 16 x 23 x 5 inches.

Laptop Computer Tray

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To provide a customized laptop computer tray for a student with disabilities. The adaptation mounts a laptop computer (with speech software) on a standard wheelchair tray so that the screen is in view while the computer is housed under the tray and the tray surface is left free. Hardware from a standard roll out "under the desk" keyboard shelf was modified to provide a platform for the laptop. Only the switch driving the software is exposed on the tr

Levenger Lap Desk

The Levenger Lap Desk is a lap tray designed for use by individuals with upper extremity or mobility disabilities. This wooden desk is designed to rest on the arms of a chair to keep weight off the user's lap. This kidney-bean shaped desk is equipped with elastic straps to hold books and materials in place; included on the strap is a pen holder loop. OPTIONS: Transparent writing pad and clip-on Laplighter light. DIMENSIONS (WxHxD): 32.5 x 16 x 0.25 inches. COLOR: Natural cherry or dark cherry.

Lexan Half Lap Tray, Left (Model 16C012-1L) & Lexan Half Lap Tray, Right (Model 16C012-1R)

The Lexan Half Lap Tray is a lap tray is designed for use by individuals who use wheelchairs. This tray has an epoxy-coated-steel slide- on mounting bracket. A hinged system allows the clear, see-through tray section to fold completely over thus leveling it with the side of the wheelchair when not in use. No tools are required for attachment. Model 16C012-1R is for right-handed use and model 16C012-1L is for left-handed use. DIMENSIONS (WxL): 10 x 20 inches.

Lift-Off Lap Cushion (Model 307050)

The Lift-off Lap Cushion, model 307050, is a lap tray designed to provide individuals who use wheelchairs with proper positioning and a work surface. This cushion is held in place with Velcro two closures that wrap around the front armrest posts and which are easily released by the act of rising from the chair; the closures also feature easy-to-grasp, easy-to-see loops which provide the user with the option of removing the cushion before rising. Covered in durable, liquid proof vinyl, the foam-p

Linear Lap Desk With Led Light

The Linear Lap Desk with LED Light is a lap tray designed for use by individuals with lower extremity or mobility disabilities and others who use wheelchairs. This oval lap desk is lightweight with rounded, smooth edges. It has a laminated plywood surface mounted on an oval wedge-shaped cushion filled with a soft foam pillow. The laminated surface is glare-free to help reduce eye strain. Other features include an attached gooseneck LED light. The cushion conforms to any lap and adjusts from fl

Low Lapboard.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Provides a work surface at a convenient height for food preparation. Can also be used to carry items from one place to another. Directions, diagram and materials for simple wooden tray that fits over the skirt guards of a wheelchair armrest. Edging along the front of the board prevents items from rolling off. SKILLS REQUIRED: Woodworking. AUTHOR: Fahland, B. TITLE: Wheelchair Selection: More Than Choosing a Chair With Wheels. REF:Book: Sister Kenny Ins

Miller's Mounting Hardware Components

The Miller's Mounting Hardware Components are designed for affixing wheelchair accessories to solid seat and back panels or to 7/8 and 1 inch wheelchair frame tubing. Fixed, swingaway, and adjustable type clamps and brackets are available. COLOR: Silver or black chrome finish.

Modu-Tray

The Modu-Tray is a lapboard with bookholder designed to act as a tray or writing board for wheelchair users. Interchangeable inserts allow the user to have an adjustable easle for computer keyboard, reading, games, or a communication board, or a microwavable, dishwasher-safe fixed bowl that will not tip. The tray is made of a see-through Lexan plastic and features a cutout. It may be modified to fit standing tables, bolster chairs, and hospital bed tables. When fitted to a wheelchair, the tray i

Moss Lap Tray

The Moss Lap Tray is a molded plastic lapboard designed to mount to Otto Bock MOSS II seating system armrests (see separate entry) with the U-shaped aluminum frame. Fits 9.5, 11.5, 13.5, 16, and 18 inch seating systems.

My4Hands

My4Hands is a lapboard for use by people with lower extremity or mobility disabilities, spinal cord injury and others who use a wheelchair. The My4Hands independence assistant is a polyethylene board that has a proprietary "hold fast" high friction material coating on each side so the lapboard will hold position on the user's lap and items placed on the lapboard will remain in place. My4Hands also insulates the user's legs from heat generated by objects (such as laptop computers or cooking pots

Mydesc Arm - Standard And Removable Models

The MYDESC Arm is an add-on armrest wheelchair accessory designed to enhance the versatility of the MYDESC Custom Desktops (see separate entries) or to be used alone. This accessory allows the MYDESC units to be mounted on the side of armchairs and wheelchairs. This steel arm is padded with foam and available in two configurations: Standard and Removable. The MYDESC Standard Arm (model 347-S501) is designed to be a fixed accessory and attaches directly to wheelchairs and other furniture using st

Mydesc Custom Desktops

The MYDESC Custom Desktops are adjustable lapboards ergonomically designed to provide a hard writing or reading surface to wheelchair users and other individuals who work away from a desk or table and to alleviate the eye strain and neck pains associated with lap work. These portable units enable the user to swivel, tilt, or pivot the desk surfaces through an infinite number of positions in order to achieve the most comfortable desk surface accessibility possible. ADJUSTABILITY: These Custom Des

Mydesc Direct Mount Models (Models Dm500 & Dm900)

The MYDESC Direct Mount Model 350-DM500, and the 90 Degree Direct Mount Model with Elbow Assembly 350-DM900, are mounting hardware for the MYDESC lapboards to clamp onto a wheelchair's frame or armrest. They include clamps and an adjustable MYDESC lapboards. The clamps will accommodate tubing from 3/4 to 1.25 inches in diameter, and both can be mounted either horizontally or vertically. Model 350-DM900 provides more height and distance from the wheelchair user's body.

Mydesc Flip Top Storage Desk (Model 250-31)

The MYDESC FlipTop Storage Desk, model 250-31, is a lapboard designed for use by wheelchair users. This laptop desk is suitable for an artists or students who needs a place to put their supplies. It has a tilting work surface that lifts to reveal a storage compartment. Because both sides of the work surface are supported by a ball-joint, the surface can be tilted or shifted from right to left, and one side swings away for transfers. An Air Spring Lifter helps to ease lifting and lowering of the

Mydesc Scooter Model, The (Model 5000)

The MYDESC Scooter Model, model 5000, is a swing away lapboard designed for use with scooters. This lapboard attaches to the bottom of the scooter seat on a curved post that fits between the seat and the controls. The work surface features tilt-, height-, and swing-away adjustments. The unit features a transparent acrylic work surface, powder-coated steel tubing, and aluminum brackets that support up to nine pounds. The unit rotates and rises with the seat and it can independently swing out of t

Mydesc Tilt-Top Desks

The MYDESC Tilt-top Desks are lapboards designed to provide an adjustable hard writing or reading surface for persons who work away from a desk or table, or for wheelchair users. These portable desks are ergonomically designed to accommodate the user's needs by swiveling, tilting, and pivoting through an infinite number of positions. When use of the desk surface is completed, the desktop swings away from the user's body with a single wrist motion. There are four different tilt-top models availab

Natural Birchwood Overlay (Models 11D.4A To 11D.4C)

The Natural Birchwood Overlay, models 11D.4A to 11D.4C is designed for use with wheelchair trays by Consumer Care Products Inc (models 11D; see separate entries). These overlays have a clear lacquer finish, and snap in and out of the trays. The overlays are designed to allow the user to benefit from the clear surface of the tray when moving, and from the opaque surface of the Birchwood insert when working on the tray. DIMENSIONS: Model 11D.4A fits trays 16 x 20 x 1/4 inches; Model 11D.4B fits tr

Ne-At Quick Release Mini Trap Assembly

The NE-AT Quick Release Mini Trap Assembly is a a wheelchair mounting bracket that can support an armrest, a drink holder, a tray, or a laptop computer mount. This small, strong quick-release bracket comes in two versions, angle adjustable or not angle adjustable, and it has optional locking pins. DIMENSIONS: 2 x 2 x 0.75 inches.

Oversize Deluxe Poly-Carbonate Wheelchair Tray (Model 11E)

The Oversize Deluxe Poly-Carbonate Wheelchair Tray 11E is a lapboard for use by wheelchair users. The tray includes a universal mounting system, continuous 5/8 inch high lip/retaining edge, captive locking-knobs, and telescoping support arms for strength. The rim is fused into the plastic tray for added strength without added weight. DIMENSIONS: 24 x 24 x 1/4 with a stomach cutout 14 inches wide and 8.5-inch deep. WEIGHT: 12 pounds.

Padded Half Lap Tray, Left (Model 16C012-2L) & Padded Half Lap Tray, Right (Model 16C012-2R)

The Padded Half Lap Tray is a lap tray designed for use by individuals who use wheelchairs. This tray has the epoxy-coated-steel slide-on mounting bracket. The hinged system allows for complete folding of the tray section thus leveling it with the side of the wheelchair. No tools are required for attachment. The tray section is padded with poly foam and covered with vinyl. Model 16C012-1L is designed for left-handed use and model 16C012-1R is designed for right-handed use. DIMEMSIONS: (WxL) 1

Plastic Wheelchair Tray (Model 11A)

The Plastic Wheelchair Tray 11A is a clear acrylic lapboard that attaches to wheelchair arms with hook and loop straps that adjust with D-rings. The tray is rimless and has a radiused and polished edge. The tray has a 4-inch deep stomach cutout. DIMENSIONS: 17 x 24 x 1/4 inches; straps are 2 inches wide. WEIGHT: Approximately 5 pounds.

Playtray

The Playtray is a lap tray designed for use by children and adults with disabilities. This heart shaped tray is constructed of a durable, impact-resistant plastic and features a tabletop with a no-spill raised edge, a large storage compartment, a 360-degree gutter drink holder, and a carrying handle. The top is large enough to accommodate a standard notepad, a laptop computer, or food and drink. Its base provides stable support by fitting snugly over a person's lap. The tray is dishwasher safe.

Poly-Carbonate Wheelchair Tray (Models 11B.1 To 11B.4)

The Poly-Carbonate Wheelchair Tray, models 11B.1 to 11B.4, is a clear plastic lapboard with straps and D-rings for adjsutment, a 4-inch deep stomach cutout, and a 5/8-inch high styrene plastic rim. DIMENSIONS: Model 11B.1 is 16 x 20 x 1/4 inches; Model 11B.2 is 19 x 24 x 1/4 inches; Model 11B.3 is 24 x 24 x 1/4 inches; and Model 11B.4 is 24 x 24 x 1/4 inches with an 8-inch deep stomach cutout. WEIGHT: Models 11B.1 and 11B.2 are approximately 6 pounds; Models 11B.3 and 11B.4 are 8 pounds.

Polycarbonate Tray

The Polycarbonate Tray is a wheelchair lap tray designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. The tray is made of polycarbonate and is available with no rim or with a polycarbonate, wooden, or rubber rim. SIZES: Child for 11 to 12 inch wheelchair; Junior for 13 to 14 inch wheelchair; Teen for 15 to 16 inch wheelchair; Adult for 17 to 18 inch wheelchair; Extra-Wide for 19 to 20 inch wheelchair; 2X-Wide for 21 t

Polycarbonate Tray (Model Tr03) & Elbow Pads (Tr21)

The Polycarbonate Tray (model TR03, $125) is a lapboard 1/4-inch thick with a rim across the front and sides designed for use on wheelchairs and seating systems. There is one size tray with cutout. The Elbow Protectors (TR21, $70) come in black only and are designed to be mounted to the tray.

Public Aid Tray (Models 33050, 33051, 33052, & 33053)

The Public Aid Tray is a lap tray designed for use with wheelchairs. Made of transparent, unbreakable polycarbonate, this tray features an aluminum rim and hook-and-loop attachment straps. DIMENSIONS (WxD): Model 33050 fits 12-inch chairs and is 18 x 19 inches with a 12-inch wide torso cutout. Model 33051 fits 14-inch chairs and is 20 x 20 inches with a 13-inch wide torso cutout. Model 33052 fits 16-inch chairs is 22 x 21 inches with a 14-inch wide torso cutout. Model 33053 fits 18-inch wide cha

Quad Care Attaching System (Model 31878)

The Quad Care Attaching System, Model 31878, is lapboard mounting hardware for use by people who are quadriplegics or who have upper extremity disabilities. The kit allows the user to attach a tray or lapboard to wheelchair armrests by using clear vinyl thumb loops to streetch elastic bands over baked epoxy metal attaching pegs. The elastic loop stretches around the armrest and the pull-ring hooks onto metal bracket. The kit includes elastic loops, vinyl pull-rings, and metal brackets with atta

Rhino Tray (Models 11A & 11B)

The Rhino Tray, models 11A and 11B, is a wheelchair lapboard and work tray for children and adults with lower extremity and mobility disabilities, spinal cord injury, and others who use wheelchairs. PolyLock Fasteners incorporated in design eliminating the need for screws or bolts in the tray surface.. Corners and edges are fully rounded for safety, and the tray tops can be snapped off in an emergency. Custom stomach and control box cutouts available. OPTIONS: Available with Telescoping Mount Ha

Rolyan Slide-On Adjustable Lap Tray (Model A707001)

The Rolyan Slide-On Adjustable Lap Tray, model A707001, is a molded-plastic lapboard designed for use by individuals who use wheelchairs. This tray is equipped with bases that fit over the upholstered armrests of a wheelchair to help prevent tipping. The tray is designed to fit wheelchairs from 16 to 20 inches wide with standard or desk-length arms. The bases can be adjusted to fit with an allen key. OPTIONS: Back strap, model A3173. DIMENSIONS (WxD): 23.5 x 21.5 inches

Samba

The Samba is an adjustable hi-low, tilt-in-space chair that offers a unique midline support system for children requiring moderate to higher levels of postural control, suitable for both home and school. The midline support system incorporates a 4 point pelvic strap that corrects the position of the pelvis. This improves alignment and helps prevent rotation and backward tilt. The modular system also eliminates the need for knee blocks. Height, width and angle adjustments can all be made easil

Sammons Preston Flipaway Armrests (Models 604401 & 604402)

Th Sammons Preston Flipaway Armrest, models 604401 and 604402 is a armrest designed for use by individuals who use wheelchairs or other seating systems. Features include a heavy duty hinge that allows the arm rest to flip up and out of arms way, a three-inch recess that serves as a beverage or ashtray holder, and a one-inch black vinyl foam padding. The armrest can also be used as a work surface or for transporting small items. Model 604401 is designed for right side attachment and Model 604402

Sammons Preston Molded Clear Lap Tray (Model A7073)

The Sammons Preston Molded Clear Lap Tray, model A7073, is a tinted translucent lapboard designed for use by individuals who use wheelchairs. This tray enables the lower extremities to be completely visible. Made of high-impact Lexan, the tray features a molded rim and a recessed space for cups, glasses, bottles, or cans. The tray is equipped with D-ring hook-and-loop straps on the arms and a snap-buckle back strap that fastens on either side of the chair. The arm and back straps attach by threa

Sammons Preston Wheelchair Elevating Arm Tray Kit (Model 6461)

The Sammons Preston Elevating Arm Tray Kit, model 6461, is an elevating armrest designed for use by individuals who use wheelchairs. Designed to fit most standard or desk armrests, this plastic tray fastens to the armrest of wheelchairs with a double D-ring Velcro Velstrap. The tray elevates to 25 degrees and can be mounted for either right or left side use. A heat gun can be used for customization. Bolts are included for elevation. DIMENSIONS (LxW): 22 x 4.5 inches. Double D-ring Velcro stra

Seating Hardware

Seating Hardware are components for seating systems that include: 7 types of head and neck supports, 5 models of outer pommel supports, 2 inner pommel support, anterior stop bars, 10 footrest bracket options, 25 suspension hook options, slide brackets, strap hooks, tray brackets, 2 types of headrest hardware, single end button locks, removable lateral hardware, laterals, box seat hardware, solid seat and back brackets, solid seat and back hinges, kids seat bracket, and a drop away pommel.

See-Thru Work Tray (Model Nc94102)

The See-Thru Work Tray, model NC94102, is a lapboard designed to provide a work, eating, and activity surface for people who use wheelchairs. The clear tray is made of polycarbonate and bordered with an all-aluminum lip on the front and sides. The tray has a hook and loop straps that attach onto wheelchair armrests. DIMENSIONS (WxD): 23.5 x 19 inches. The width of the oval space in front of the user's stomach is 15 inches.

Skil-Care Removable Wheelchair Lap Trays (Series 7050)

Skil-Care Removable Wheelchair Lap Trays, series 7050, are designed to provide a work and feeding surface and positioning support for people who use wheelchairs. Available styles include a long-lasting Dura-Tray, a clear tray, an Econo-Tray, and a padded SofTop Tray. The SofTop Tray is available in an adult or a child's model. All trays feature straps that secure around the chair with easy-open closures. OPTIONS: Replacement straps. DIMENSIONS: The child's SofTop Tray is 19 x 22 inches.

Slipcasting Board

The Slipcasting Board is a lapboard designed to assist users with limited strength to handle the large, heavy plaster molds that are used for slipcasting. The device consists of a 3/4-inch plywood board with an opening on one side. The user places the board between two chairs and sits on one side. The board surface supports the plaster mold and provides a safer working position to handle the heavy mold. The opening allows the slip to be poured out of the mold and into a bucket which is placed on

Standard Comfortline Armrest Series

The Standard Comfortline Armrest Series are add-on armrests and lapboards designed to provide a small writing or work surface for people who use wheelchairs. These wooden armrests have foam padding covered in molded satin vinyl and are available in fixed or flip- away models for both right and left wheelchair arms. These armrests feature a molded cup holder recess. DIMENSIONS (WxD): 9.5 inches wide at the widest point, tapering to 8 inches x 22 inches. The armrests have a .5-inch thick wood base

Standard Viewline Plus Armrest Series

The Standard Viewline Plus Series are add-on armrests and lapboards designed to provide a small writing or work surface for people who use wheelchairs. The armrests are fabricated of transparent, unbreakable, scratch-resistant polycarbonate and are available in fixed or flip-away styles for both right and left wheelchair arms, and are available in armrest only or armrest with PVC plastic rim models. DIMENSIONS: 3/8 x 22 x 9.5 inches wide at the widest point, tapering to 8 inches. COLOR: The plas

Standard Woodline Light Reversible Armrest

The Standard Woodline Light Reversible Armrest is an add-on armrest and lapboard designed to provide a small writing or work surface for people who use wheelchairs. The 7-ply Finnish birch plywood armrest comes standard with a clear lacquer finish and is designed to be assembled by the user in either a right or left configuration. Model 31326 is a fixed armrest and Model 31328 is a flip-away style; all necessary mounting hardware is included with both models. DIMENSIONS: 3/8 inch thick x 22 inch

Steel Channel Bracket Attaching System (Model 30300)

The Steel Channel Bracket Attaching System, model 30300, is lapboard mounting hardware designed to secure armrest-style trays to wheelchairs. This heavy-duty steel bracket includes all required mounting hardware for attaching to a tray (not included) and enables a tray to slide on to the armrests from the front. This flip-away bracket fits standard wheelchair armpads and permits chair entry and exit without removing the tray. DIMENSIONS: Fits 1 1/8-inch high standard pads. WARRANTY: This product

Swing Away Tray (Model Sat126)

Durable 3/8 inch clear polycarbonate tray supports a weak or paralyzed arm. Acts as a portable writing or eating surface and/or reading support. Tray curves around body front during use, but quickly swings up and over wheelchair wheel for safe storage when not in use. Lightweight and has 5/8 inch protective white rubber trim that is removable for easy cleaning. Easy to install. Available for right or left side.

Tablet Arms Tray (Model 11H)

The Tablet Arms Tray 11H is a swing away lapboard designed for individuals who frequently transfer in and out of a wheelchair. This portable tablet sized tray can be carried in a wheelchair backpack or stored without obstruction by snapping it onto the side of the chair. The tray is made of clear, nearly unbreakable polycarbonate plastic with a rim. Trays are made for right or left hand use. WEIGHT: Approximately 5 pounds.

Tech Table

Tech Table is a lap tray designed for use by individuals who use wheelchairs or scooters. The unit features a zippered Cordura nylon case with straps with buckles to secure it to the wheelchair, a handle for transfers, and a removable, wipe clean ABS plastic top that is suitable for reading, writing, dining, and recreation. The padded, foam-lined storage area under the top features five organizer pockets and accommodates books, files, pens, wallets, calculators, etc. The case includes two straps

Telescoping Mount Hardware For Wheelchair Tray (Model 11.1)

The Telescoping Mount Hardware for Wheelchair Tray, model 11.1, is lapboard mounting hardware designed to secure trays to wheelchairs. This system includes powder coated arms, tubes, rings and poly-lock pegs to enable a lapboard or tray to be mounted to a wheelchair. WEIGHT: 15 pounds.

Theratray (Models 31100 & 31105)

The Theratray, Models 31100 and 31105, are lapboards designed for use by people who use wheelchairs. The trays are fabricated of polyurethane foam to eliminate sharp edges, and strengthened by a 0.25-inch Aspernite wood insert. Both models include a fully molded rim and straps. DIMENSIONS: The Adult model (no. 31100) is 23.5 x 22 inches, with a 15 x 9 inches torso cutout. The oblong juvenile size (no. 31105) is 26.5 x 24 inches, with a 10.5 x 6 inches torso cutout. WARRANTY: The manufacturer war

Thriftytray (Models 31128, 31129, 31255, 31256)

Thriftytrays are lapboards designed for attaching to wheelchairs. These hardboard trays have rectangular work surfaces and are available in four models: Model 31129 is an adult tray with straps; Model 31128 is an adult tray with foam pads and straps; Model 31255 is the extra-wide tray with straps; Model 31256 is the extra-wide tray with foam pads and straps. DIMENSIONS (WxD): The adult trays are 23.5 x 22 inches with a 15 x 9 inch torso cutout; X-wide trays are 25.5 x 22 inches with a 15 x 9 inc

Tilt-A-Tray Adjustable Wheelchair Tray (Models H70670-0000 & H70670-0001)

The Tilt-A-Tray Adjustable Wheelchair Tray is a swing away lapboard designed to adjust vertically and tilt forward and back. The tray is attached to the wheelchair frame and swings away for access to the chair seat. The tray is made of clear polycarbonate and has front and rear edge bars. The right side is mounted to a hinged bar and the left side is held by suction cups mounted to adjustable bars. Fittings are molded of high-strength ABS plastic. Extension rods and braces are made of stainless

Top Drop Clamp Attaching System (Model 31070)

The Top Drop Clamp Attaching System, model 31070, is lapboard mounting hardware designed to secure trays to wheelchairs. This system enables the tray (not included) to be positioned straignt down on the armrests and requires only 3/8-inch clearance under the armpad which enables the tray to be used when a joystick or other control is mounted next to the armpad. The tray locks on with the turn of a handle. Made of glass-filled nylon, the clamps adjust to fit arms of different widths and pads of d

Transparent Trays

Transparent Trays are lapboards made of a see through polycarbonate plastic. The trays enable open visual field for safer wheelchair mobility. Several models are available: an adult model with an anodized aluminum rim (no. 8696, $67) and an adult model without a rim (no. 8242, $72.33) with Velcro straps, and a pediatric model (no. 8306, $105.45) with Velcro straps. DIMENSIONS: Adult size models are 23.5 x 22 inches; pediatric size is 20.5 x 18 inches; all models are .25 inches thick.

Tray Attachment

This Tray Attachment is a wheelchair lapboard, to be used in conjunction with the "Bowling Ball Holder Ring". This attachment converts the Bowling Ball Holder Ring into a tray which may be used for dining, letter writing, as a class desk, etc. The tray is made of a waterproof material.

Tray Bracket (Model Tr30 & Tr31) And Tray Bracket Receptacle (Tr32)

The Tray Bracket ($50, model TR30 & TR31 for left and right armrests, respectively) and the Tray Bracket Receptacle ($70, TR32) are designed to attach a tray to the armrest of a wheelchair or seating system. The units are compatible with many armrests. The bracket is mounted on one armrest and the receptacle is mounted on one side of tray. Support on both sides is recommended for heavy duty applications.

Tray Clamps (Model 31086)

Tray Clamps, Model 31086, are lapboard mounting hardware designed to mount trays and lapboards to wheelchairs. These clamps provide a means of locking trays to wheelchair frames using one lever motion. WARRANTY: The manufacturer warrants this product to be free of defects in materials and workmanship for 90 days from the date of purchase.

Tray For Powered Wheelchair

---- PROTOTYPE --------- PURPOSE: To create a prototype of a tray for a powered wheelchair for individuals with a C6 spinal cord injury (SCI) for use with power wheelchairs. The requirements for the tray are defined to meet the American with Disabilities Act (ADA) and through interviews with power wheelchair users. Power wheelchair users with this tray will have the ability to deploy a tray when needed; however, when not in use, the tray can be stored on the wheelchair. The final tray design is

Tray For Wheelchair

CUSTOM ADAPTATION PURPOSE: To enable individuals with mobility disabilities to shop and carry items. Designed for use on a variety of wheelchairs, the tray was fashioned of PVC with a lip at the front made of aluminum angle to prevent items from falling off. The tray attaches to the wheelchair with Velcro for attachment and removal. TITLE: In the Basket. JOURNAL: TAD Journal. REF: Vol. 21 no. 2, Winter 2001: p. 17. PAGES (including cover): 2 2001.

Tray Stay Clamping System (Model 31085)

The Tray Stay Clamping System is lapboard mounting hardware designed to attach trays and lapboards to wheelchairs. The modular clamping system allows the user to adjust the height and position of the tray by attaching the base channel system to the tray and inserting the appropriate spacers. The clamps are secured by an attachment knob. The system can be used to mount trays directly to the wheelchair armrest and crossbar, the armrest pad, or to the manufacturer's Extenda-Arms, which provides ad

Trayaway

The Trayaway is a swing-away lapboard designed for use by individuals who use powered wheelchairs. This armrest tray is designed for a universal fit on most commercially-available wheelchairs. The unit provides a functional armrest with a built-in tray that folds out for the user without assistance for working on a laptop, writing, reading, or eating. It is also designed to safely support a laptop communication device. Other features include a transparent reading surface that can be tilted to su

Traymate

Plastic tray that fits on arm of wheelchair or upholstered chair. Perpendicular leg rests against inside of chair arm, adjustable spring loaded leg locks tray in place on outside of chair arm. Cut out for cups. 9 by 13 inch surface. Folds for storage. Washable. Fits also on hospital beds.

Trays & Hardware

The Tray and Hardware are a lapboard and mounting hardware designed for wheelchairs. The polycarbonate tray may be ordered with or without flip locks. Requires cutting out for trunk, sanding edges, and mounting of flip locks. OPTIONS: Tray elbow protection pads also available as individual or full pad. Mounting hardware may be ordered separately. DIMENSIONS: 18 x 24 inches (Small) and 24 x 27 inches (Large).

Trimline Comfortline Armrest Series

The Trimline Comfortline Armrest Series are add-on armrests and lapboards designed to provide a small writing or work surface for people who use wheelchairs. These wooden armrests are foam-padded and covered in satin finish vinyl. The armrests are available in fixed and flip-away styles for both right and left wheelchair arms and feature a molded cup holder recess. DIMENSIONS: .5 x 10.5 inches wide at the widest point, tapering to 6 inches x 22 inches. The foam padding is 1 inch thick. COLOR: Bl

Trimline Viewline Plus Armrest Series

The Trimline Viewline Plus Series are add-on armrests and lapboards designed to provide a small writing or work surface for people who use wheelchairs. Fabricated of transparent, unbreakable, scratch- resistant polycarbonate, the armrests are available in fixed or flip-away styles for both right and left wheelchair arms in tray only and tray with PVC plastic rim models. DIMENSIONS: 3/8 x 22 x 10.5 inches wide at the widest point, tapering to 6 inches. COLOR: The PVC plastic rims are black. WARRA

Trimline Woodline Light Reversible Armrest

The Trimline Woodline Light Reversible Armrest is an add-on armrest and lapboard designed to provide a small writing or work surface for people who use wheelchairs. The 7-ply Finnish birch plywood armrest has a clear lacquer finish and is designed to be assembled by the user in a right or left configuration. The necessary mounting hardware is included with the fixed model, Number 31302, and the flip-away model, Number 31309. DIMENSIONS: Both models are 3/8 inch thick x 22 inches deep x 10.5 inc

Tube Arm Bracket Attaching System (Models 31902 & 31907)

The Tube Arm Bracket Attaching System is lapboard mounting hardware designed to secure trays to wheelchairs. These brackets enable a tray (not included) to slide on to tube-style armrests from the front. The brackets are attaached at both ends of the tube, enabling the tray to be attached to the top of the armrests (mounting hardware is not included). hook-and-loop straps (not included) may be used with these brackets for extra stability. OPTIONS: Mounting hardware (no. 31096H).SIZES: Small (no.

Universal Arm Mount (Model 347-Ua503)

The Universal Arm Mount, model 347-UA503, is a mounting clamp for wheelchair accessories designed specifically for attachment of the MYDESC EZ-Removable Arm (see separate entry). This metal clamp block can be used with wheelchair tubing from 0.75 to 1.25 inches in diameter, and provides a 0.78 inch cylinder slot for mounting the EZ-Removable Arm directly to the wheelchair frame. The clamp may be mounted either horizontally or vertically.

Valueview Tray (Model 3115)

The Valueview Tray, model 3115, is a lap tray designed for use with wheelchairs. Made of transparent, unbreakable polycarbonate, this tray features an aluminum rim and hook-and-loop attachment straps. DIMENSIONS (WxD): 23.5 x 19 inches. The straps are one inch wide. The tray is 0.25-inch thick. WARRANTY: This product is warranted against defects in workmanship and materials for 90 days from the date of purchase.

Velcro Closure Armrest Mount For Lapboard (Model 08-1000)

Lapboard with velcro closure, mounts on armrest. 1/4 inch clear acrylic. Sizes: 26 by 24 inches with 15 by 19 inch body cutout, 24 by 24 inches with 15 by 9 inch body cutout, 22 by 22 inches with 13 by 7 1/ 2 inch body cutout, 20 by 20 inches with 10 by 6 inch body cutout. Modifications and accessories: 3/8 inch acrylic, colored acrylic, 1/4 inch lexan, 1/4 inch ABS, special cutouts, special widths and depths, aluminum rim, plastic rim, communication overlay.

Velcro Closures Armrest Mount, Birch Lapboard (Model 08-4000)

Lapboard of birchwood with waterproof seal and plastic rim. Armrest mounting, velcro fasteners. Sizes: 24 by 24 inches with 15 by 9 inch body cutout, 22 by 22 inches with 13 by 7 1/2 inch body cutout, 20 by 20 inches with 10 by 6 inch body cutout. Custom cutouts, widths and depths available.

Vertical Tray

DO IT YOURSELF ENTRY --- PURPOSE: To hold object in view for an individual who is unable to move her neck to look down at a wheelchair tray. A vertical tray was made of wood that attached to the existing tray with quick-release clamps. The tray has vertical wings on each side to keep objects from falling off. The tray can be adjusted forward and backward for proper positioning. A clear plastic shelf was installed in slots on the tray and can be adjusted up or down for optimal viewing. TITLE: The

Viewline E-Z Lock Quik-Fit Trays (Models 33000P, 33001P, 33002P, 33017P, 33000, 33001, 33002, & 33017)

The Viewline E-Z Lock Quik-Fit Trays are lap trays designed for use with wheelchairs. These trays feature an E-Z Lock Clamping System that adjusts for standard or thick arm pads, enables the tray to slide on to the armrests from the front, and secures the tray with a simple locking motion. The moisture-resistant Viewline Trays are made of transparent unbreakable polycarbonate. Models 33000P, 33001P, 33002P, and 33017P have a black PVC rim. The other models do not have a rim. SIZES: Child (fits w

Viewline Plus Extended Wing Trays (Models 31226, 31224, 31227, & 3125)

The Viewline Plus Extended Wing Trays are lap trays designed for use with wheelchairs. These moisture-resistant Viewline Trays are made of transparent unbreakable polycarbonate. Models 31226 and 31227 have a black PVC rim. The other models do not have a rim. The extended wings are designed to fit around the back uprights of the chair and they accommodate growth. SIZES: Small and large. DIMENSIONS (WxD): The small models (nos. 31224 and 31226) are 19.5 x 23.5 inches with an 11.5-inch wide torso c

Viewline Plus Series

The Viewline Plus Series are lapboards designed for attaching to wheelchairs. These trays are fabricated of transparent, unbreakable, scratch-resistant polycarbonate, and are available in tray only, tray with rim, tray with straps, and tray with rim and straps models. The juvenile tray has an oblong work surface; all other trays are rectangular. OPTIONS: Tray rims are available in a choice of anodized aluminum or PVC plastic. SIZES: All models are available in child, juvenile, adult, and extra-w

Viewline Series

The Viewline Series are lapboards designed for use by people who use wheelchairs. Constructed of transparent polycarbonate, models include the tray only, tray with anodized aluminum rim, tray with straps, tray with rim and straps, and the tray with the Quad Care Attaching System (see separate entry). The juvenile tray has an oblong surface; all other trays are rectangular. SIZES: The tray with the Quad Care attaching system is available in an adult size only; all other models are available in ch

Viewline Top Drop Quik-Fit Trays (Models 33006P, 33008P, 33010P, 33013P, 33006, 33008, 33010, & 33013)

The Viewline Top Drop Quik-Fit Trays are lap trays designed for use with wheelchairs. These trays feature a Top Drop Clamping System that enables the tray to be positioned straignt down on the armrests and requires only 3/8-inch clearance under the armpad which enables the tray to be used when a joystick or other control is mounted next to the armpad. The tray locks on with the turn of a handle. The moisture-resistant Viewline Trays are made of transparent unbreakable polycarbonate. Models 33006

Viewline Top Drop Quik-Fit Trays With Control Cutouts (Models 33025, 33026, 33027, 33028, 33029, 3330, 33031, 33032, 33033, 33034, 33035 & 33036)

The Viewline Top Drop Quik-Fit Trays with Control Cutouts are lap trays designed for use with powered wheelchairs with joysticks and other controllers. These trays feature a Top Drop Clamping System that enables the tray to be positioned straignt down on the armrests and requires only 3/8-inch clearance under the armpad which enables the tray to be used when a joystick or other control is mounted next to the armpad. The tray locks on with the turn of a handle. These trays also feature a cutout i

Wheelchair Computer Tray

DO-IT-YOURSELF ENTRY --- PURPOSE: To create a computer work table for a wheelchair. The table surface is made of plywood and positions a laptop computer directly in front of the user. The table is angle-adjustable and pivots out of the way or can be removed for transfers or when not in use. The table is supported by a pole and support made of threaded pipe. MATERIALS: Plywood and threaded pipe. TOOLS: Shop tools. SKILLS REQUIRED: Basic shop skills. TITLE: Doing It Yourself. JOURNAL: Quest. REF:

Wheelchair Positioner Cushion

The Wheelchair Positioner Cushion is a torso support designed for use by individuals who use wheelchairs. This M-shaped cushion rests over th lap of the users and the notches fit around the wheelchair frame to keep the cushion in position. Designed for use in wheelchairs with standard arms, this cushion promotes upper body alignment, prevents forward leaning, and serves as an elbow rest and work surface. A removable, wipe-clean, water-repellant vinyl cover is included. DIMENSIONS: Available in a

Wheelchair Reading Board.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Wheelchair tray with a hinged section that tilts up to support reading material; can be swung out of the way or easily removed. Lists materials needed and provides drawing and diagram for a wheelchair reading tray, made of wood with aluminum bar stock and pipe tube. COMMENTS: For information contact: Dr Ken Bruwelheide, Department of Agricultural and Industrial Education, Montana State University, Bozeman, Montana 59717. SKILLS REQUIRED: Woodworking. M

Wheelchair Snack Tray (Model 70621-0000)

The Wheelchair Snack Tray, model 70621-0000, is a lapboard designed to clamp to wheelchair tubing to hold snacks and beverages. The tray sticks to a platform by Velcro pads to facilitate removal for cleaning. The try is made of polystyrene; metal parts are epoxy coated. DIMENSIONS: 6.5 x 9.75 inches.

Wheelchair Table Attachment

This Wheelchair Table Attachment is a wheelchair lapboard with removeable desk arms. The table attaches to the wheelchair frame and front of the armrests with clamps. The tray is made of wood with a formica top and aluminum tubing. DIMENSIONS: 8 w x 24 l Specify width between arm rests when ordering.

Wheelchair Tray

The Wheelchair Tray is a lapboard designed for use by individuals who use wheelchairs. This plastic tray helps provide support for proper positioning while creating work and eating space. The tray features a torso cutout and raised edges prevent items from rolling. Velcro fasteners securely fasten the tray to the wheelchair. DIMENSIONS: 20 x 24 inches. WEIGHT: 1.1 pounds.

Wheelchair Tray

The Wheelchair Tray is a lapboard designed to enable the user to eat or do other activities from their wheelchair and to provide some protection from spills. The tray is made of plywood with two sides that rest on the seatpan of the wheelchair. A vinyl seal is fixed to the inside edge of the tray to protect the user from spills. PROTOTYPE DEVELOPMENT: Designed by John Duffus as a more comfortable and practical eating surface for wheelchair users at a standard height tabletop that is not high eno

Wheelchair Tray

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual who uses a wheelchair to carry meals and items and to have a drink holder. This tray is customized to fit the individual wheelchair. Made of wood and varnished, the tray has a wooden rim on all sides to keep items from rolling or sliding off. Wooden or metal rods fastened to the bottom of the tray slide into the hollow horizontal tubes under each armrest. To allow the rods to be inserted, the front retaining screw on each armrest must be

Wheelchair Tray

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted tray to fit on a wheelchair used by an individual with cerebral palsy and intellectual disability. This individual spends most of her day in her wheelchair and needs something to occupy her and a surface to rest it on; in other words, a portable table which she can use for her walkman, DVD player or to hold a magazine, etc. The tray is made from 9 millimeter plywood with a lip added around the front and side edges to stop o

Wheelchair Tray (Model 5061) & Wheelchair Tray Child Size (Model 2467)

Wheelchair tray with rim fits all size wheelchairs with full length or desk arms. Sides are tapered to permit chair propulsion with tray in position. Smooth plastic top. 24 by 19 inches with 15 by 6 inch cutout; child size 20 by 19 inches with 12 by 3 1/2 inch cutout.

Wheelchair Tray (Model 6025)

Formica lapboard, Velcro fasteners. Adult size, 24 by 20 inches by 1 inch.

Wheelchair Tray (Model 91)

The Wheelchair Tray, Model 91, is a solid lapboard that fits on the armrests of a wheelchair. The tray has a stain-resistant liminated finish ans Velcro attachment straps.

Wheelchair Tray (Model H70601-0015)

The Wheelchair Tray, model H70601-0015, is a formica lapboard designed to be attached to either side of a wheelchair with Velcro fastening straps. This rigid tray has a non-glare surface, a cutout, and a channel around its perimeter to catch spills. The edges are protected by smooth plastic molding. DIMENSIONS: Tray is 24 x 19 inches. WEIGHT: Shipping weight is 8.3 pounds.

Wheelchair Tray Easel (Models 31140 & 31141)

The Wheelchair Tray Easel, Models 31140 and 31141, is a bookholder with lapboard and an easel designed for use by people who use wheelchairs. The adjustable angle easel attaches to any lapboard with a front rim. Model 31140 is made of clear polycarbonate, and Model 31141 is fabricated of Melamine-impregnated fiberboard. Both models have a hinged, adjustable length leg brace for setting the angle of the easel. The easel includes a 1.5-inch front edge or lip. WARRANTY: The manufacturer warrants th

Wheelchair Tray.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Provides an attached table surface for a person in a wheelchair; can be used for activities or for arm support. Materials, diagrams and directions for making three types of wooden wheelchair laptrays. A standard tray with Velcro straps for attachment to wheelchair arms; a variation which folds in half; and a lowered tray useful for activities like cooking. SKILLS REQUIRED: Woodworking. AUTHOR: Gavee, B. TITLE: Wheelchair and Accessories REF: Book: Acce

Wheelchair Trays

The Wheelchair Trays are lap trays designed for use by children and adults who use wheelchairs. Made of shatterproof clear polycarbonate, the trays include adjustable mounting hardware. OPTIONS: Engraving of names and addresses, custom cutouts, slantboards, and more. DIMENSIONS: All models are made of 3/8-inch thick polycarbonate. Standard models are available for 10- to 12-inch wheelchairs, 13- to 14-inch chairs, 15- to 17-inch chairs, and 18- to 20-inch chairs. Custom dimensions are also avail

Wheelchair Trays (Models 4040, 4042, 4044, 4080, & 4090)

The Wheelchair Tray, models 4040, 4042, 4044, 4080, 4090, is a lapboard designed to be used by individuals in wheelchairs who need a hard, flat surface for eating, writing, etc. The trays have raised T-molding on the outside edges for extra security and have a half-moon cutout facing the individual. The universal design fits all standard wheelchairs and attaches with Velcro fasteners. SIZES: Adult 20 x 24 x 1/2 1 inch. Child 20 x 18 x 1/2 inch.

Wheelchair Trays And Modifications

Lapboards. Available in 1/2 inch 9 ply birch plywood, or 3/8 or 1/4 inch Tuffak (polycarbonate material), with regular or heavy duty cottonwood ribs. Range of widths, 20 7/8 to 25 3/4 inches; depths 17 7/ 8 to 25 3/4 inches; Cam adjustment range 13 3/4 - 18 1/4 inches to 18 1/ 4 - 23 1/4 inches. Small fits STC 803/900 Models and Tiny Tot and Growing wheelchairs; Medium fits STC 804/806/900 Models and Growing, Narrow Adult and Adult wheelchairs; Large fits STC 804/806/900 Models and Adult wheelch

Wing Self-Storing Wheelchair Tray

The Wing Self-Storing Wheelchair Tray is a swing-away lapboard for manual and powered wheelchairs and 3-wheeled scooters. The patented, tablet-size tray is made of clear polycarbonate plastic, and has a pencil/spill trough plus a rim along the outer edge and a slide control. When the tray is in the stored position, the user has unobstructed access to the wheels of the chair. An adjustable, 3-directional hinge and a telescoping arm permit the tray to flip up or down and slide back and forth. Moun

Wood Tray With Vinyl Cover

The Wood Tray with Vinyl Cover is a wheelchair lap trays designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs. The tray is made of birch wood with a wooden rim, and it has foam padding with a vinyl cover. The unit comes with mounting hardware, and it is available as a stationary or flip-up tray for the right or left side of the wheelchair. DIMENSIONS: 22 x 13 inches; wood is 0.38 inches thick; foam is 1 inch thick.

Woodline Light Trays (Series 31100)

The Woodline Light Trays are lap trays designed for use with wheelchairs. These seven-ply birch trays have limitied moisture resistance and can be attached using the E-Z Lock Clamp, Top Drop Clamp, Tube Arm Braxkets (not included), or other attaching system. Models include the tray only, tray with hook-and-loop attaching straps, tray with a three-piece wood rim, and tray with straps and rim. SIZES: Child (fits wheelchairs 12 to 14 inches wide), adult (fits chairs 14 to 17 inches wide), extra wid

Woodline Series

The Woodline Series are lapboards designed for use by people who use wheelchairs. The trays are constructed of 7-ply birch plywood with a lacquer finish. Models include the tray only, tray with 3-piece wood rim, tray with straps, and tray with straps and rim. The juvenile tray has an oblong design, while the other models are square. SIZE: All models are available in child, juvenile, adult, and X-wide sizes. DIMENSIONS (W x D): The adult tray is 23.5 x 22 inches, with a 15 x 9 inches torso cutout

Ziggy Swing Tray

Swing away lapboard for E & J wheelchairs with interchangeable full size armrests. Lapboard mounts to the front of the frame, swings down to side for storage, or, it can be mounted to be used on the side of chair. Top can be adjusted vertically. Acrylic. Specify color of armrest pad.

 
Processing...


Driving Walking/Biking Public Transit  Get Directions