Communicator Mounting Kit for Wheelchair

Results: 40

3Rd Hand Small Electronics Mount

The 3rd Hand Small Electronics Mount is an extension arm for wheelchair accessories designed for use by individuals with mobility or neurological disabilities or spinal cord injury. The standard mount comes with a three-segment support arm, a ball base for attachment to the wheelchair or other surface, and a head plate surface for holding small electronics such as a cell phone, iPod, camera, PDA, miniPC, or adaptive switches. The head plate has an AMPS-NEC compatible head plate hole pattern. Ite

Accessory Mounting Platforms & Hardware

The Accessory Mounting Platforms and Hardware are adjustable wheelchair mounting kits for communicators. These aluminum mounting systems have a 2.5 x 8.5 inch platform and adjust through 360 degrees. Options include a flexible or pedestal mount, and flange, tube clamp, or tray clip.

Bogen Multi Position Support Arm & Super Clamp

The Bogen Multi-position Support Arm and Super Clamp are mounting hardware for communicators and other accessories designed to be mounted to a table or wheelchair. The Support Arm has a fully articulated arm (three universal joints) with 90 degree pivotable and 360 degree rotatable ends, and an elbow that rotates 360 degrees. The adjustable, one-control handle located at the elbow joints locks all three joints firmly. The arm can be mounted permanently, or used with the Super Clamp. The Super Cl

Cjt Super Eval Kit

The CJT Super Eval Kit is an assistive technology assessment system designed for use by therapists or assistive technology specialists in evaluating mounting systems. The kit contains four complete mounting systems and optional components. Mounting systems include the Profiler, ProLite, and Profiler Lite (see separate entries). Optional components include clamping bases, inserts, and mounting tools. The kit comes in a hard-shell case with an adjustable handle, wheels, and a security lock.

Cork-Tabbed Multi-Page Communication Book Secured To Lap Tray

--- "DO IT YOURSELF" ENTRY ------- DESCRIPTION: A vinyl communication book attached to the wheelchair lap tray with U-bolts. Staggered corkboard strips separate the pages. The user flips each page over the front edge of the lap tray until the desired pages is found. PURPOSE: To stabilize and facilitate easy page selection and page turning of a communication book for individual who have poor arm and hand coordination. The system described here is very durable, to accommodate a particular in

Daessy Folding Mount

The Daessy Folding Mount is a wheelchair mounting system for communication devices. The unit provides a solid, stable platform that can be adjusted to meet the positioning needs of each individual. The communication device and platform can be rotated down and out of the way beside the wheelchair to permit close-in positioning to a desk or table. Models are available for 7/8-inch tubing, .75-inch tubing, and 1-inch tubing, all in a choice of 6- and 12-inch offset.

Daessy Mini Adjustable Mount (Model M75-Am)

The DAESSY Mini Adjustable Mount, model M75-AM, is a stand for a tablet computer and a computer mounting kit for wheelchair designed for use by individuals with use of only one hand, or mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The system has several points of adjustment to set up and position the mount. Two rotating joints can be angled and twisted in various directions to adjust the horizontal tube position. The system is supported on the wheelchair by a

Daessy Mini Bent-Tube Mount (Model M75-Btm)

The DAESSY Mini Bent-Tube Mount, model M75-BTM, is a stand for a tablet computer, switch mounting hardware and a computer and communicator mounting kit for wheelchair designed for use by individuals with use of only one hand, or mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The mount is non-directional and can be installed on either side of the wheelchair. This product also can be removed from the wheelchair when not needed. The frame clamp assembly includes a

Daessy Mini Folding Mount (Model M75-Fm)

The DAESSY Mini Folding Mount, model M75-FM, is a stand for a tablet computer, switch mounting hardware and a computer and communicator mounting kit for wheelchair designed for use by individuals with use of only one hand, or mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The mount is non-directional and can be installed on either side of the wheelchair. The system folds the horizontal tube down to the outside. The folding joint between the two mount tubes brin

Detachable Laptray With Electronic Talking Communicator.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Laptray to securely hold electronic communication device on wheelchair lapboard. A hinged vacuum formed plastic housing was designed to clamp to the desk arms of a wheelchair. By lifting the laptray the individual has immediate access to the communicator, yet it is concealed when it is not in use. The top of the laptray provides a working surface for the individual. Includes photographs. SKILLS REQUIRED: Plastics, woodworking. AUTHOR: David Law, Jr., W

Frs 3-D Fixed Position Wheelchair Mount

The FRS 3-D Fixed Position Wheelchair Mount is a communicator mounting kit for wheelchair or scooter designed for use by individuals with communication and mobility, neurological or severe physical disabilities. Designed for use with the ComLink communicators (see separate entries), the flexible mount system is available with a variety of frame clamps to allow attachment to most wheelchair or scooter configurations. The ComLink communicator attaches to the mount by sliding the communicator's mou

Frs 3-D Folding Wheelchair Mount

The FRS 3-D Folding Wheelchair Mount is a communicator mounting kit for wheelchair or scooter designed for use by individuals with communication and mobility, neurological or severe physical disabilities. Designed for use with the ComLink communicators (see separate entries), this flexible mount system is available with a variety of frame clamps to allow attachment to most wheelchair or scooter configurations. The ComLink communicator attaches to the mount by sliding the communicator's mount pla

Frs 3-D Swing-Away Wheelchair Mount

The FRS 3-D Swing-Away Wheelchair Mount is a communicator mounting kit for wheelchair or scooter designed for use by individuals with communication and mobility, neurological or severe physical disabilities. Designed for use with the ComLink communicators (see separate entries), this flexible mount system is available with a variety of frame clamps to allow attachment to most wheelchair or scooter configurations. The ComLink communicator attaches to the mount by sliding the communicator's mount

H-18 Magic Arm

The H-18 Magic Arm is a mounting kit for tablet computers, communicators, or ebooks, an adjustable ebook holder and a stand for a tablet computer designed for use by people with grasping, neurological or upper extremity disabilities, cerebral palsy or arthritis. The H-18 includes the Super-Clamp which allows clamping to wheelchairs, bedrails, desks or tables; and an iPad tablet holder without case or an adjustable tablet holder (ATH) for other devices or tablets such as the Auggie or Super-Auggi

H-80 Short Arm

The H-80 Short Arm is stand for tablet computer and an adjustable ebook holder designed for use by people with grasping, neurological or upper extremity disabilities, cerebral palsy or arthritis. The H-80 includes the Super-Clamp (which allows clamping to wheelchairs, bedrails, desks or tables) and an iPad tablet holder without case or an adjustable tablet holder (ATH) for other devices/tablets such as Auggie/Super-Auggie (see separate entries), Barnes and Noble Nook, and Amazon Kindle. The user

Hover Mounting Kit For Idevices

Hover Mounting Kit for iDevices is a mounting system designed to mount iDevices (i.e. iPads, iPad mini, iPhone 4, 4S or 5, etc.) using the Latitude Mounting Arm. It is designed for use by individuals with limited upper extremity coordination and strength, fine motor and grasping difficulties. This kit includes the Latitude Mounting Arm, Super Clamp, mounting plates and a Quick Start Guide. It is made out of strong carbon fiber. WEIGHT: 1.1 lbs/.5kg COLOR: Black WARRANTY/GUARANTEE: As stated by t

Independence Mount With Notebook Plate

The Independence Mount with Notebook Plate is a wheelchair mounting kit for communicators and portable computers. Designed to be mounted on the right or left side of the wheelchair, this unit fits most communicators and portable computers and can be adjusted to hold the device at the right height, position, and angle for comfortable operation. This mount can be easily folded out of the way when not in use.

Ipad Mounting System (Model 1556)

The iPad Mounting System, model 1556, is a stand for a tablet computer and a computer mounting kit for wheelchair designed for use by individuals with use of only one hand, or mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The system is composed of three parts: a mounting platform for the iPad, a mounting arm, and a clamp. Two flexible cords that securely hold the iPad to the platform are included. The light duty mounting arm expands from 14.5 inches to 24 inch

Modularhose.com Assistive Technology Double Kit (Model 90655)

The ModularHose.com Assistive Technology Double Kit, model 90655, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes preassembled and includes 6 feet of

Modularhose.com Assistive Technology Double Spring Clamp Kit (Model 90674)

The ModularHose.com Assistive Technology Double Spring Clamp Kit, model 90674, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit includes a 4 x 6 inch plat

Modularhose.com Assistive Technology Kit (Model 90650)

The ModularHose.com Assistive Technology Kit, model 90650, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes preassembled and includes 3 feet of Loc-Li

Modularhose.com Assistive Technology Kit Plus (Model 90652)

The ModularHose.com Assistive Technology Kit Plus, model 90652, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes preassembled and includes 6 feet of L

Modularhose.com Assistive Technology Kit With Two Plates (Model 90654)

The ModularHose.com Assistive Technology Kit with Two Plates, model 90654, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes preassembled and includes

Modularhose.com Assistive Technology Spring Clamp Kit (Model 90673)

The ModularHose.com Assistive Technology Spring Clamp Kit, model 90673, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit includes a 4 x 6 inch plate, 2 5.75

Modularhose.com At Ipad Kit (Model 90670)

The ModularHose.com AT iPad Kit, model 90670, is a stand for a tablet computer and a computer mounting kit for wheelchair designed for use by individuals with use of only one hand, or mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The system can be used with iPad 1 and iPad 2. The kit comes with an iPad holder with a silicon edge for protection and grip, an integrated fixed mount plate attached to the iPad holder, 2 spring clamps with integrated fixed mount, 2

Modularhose.com At Starter Kit (Model 90680)

The ModularHose.com AT Starter Kit, model 90680, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes with all the common parts used in the assistive tec

Modularhose.com Round Tube Clamp Kit (Model 90750)

The ModularHose.com Round Tube Clamp Kit, model 90750, is a computer or communicator mounting kit for wheelchair or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The kit is intended to be used with Loc-Line 1-inch or 0.88-inch diameter tubing. Plates are made of stainless steel. The kit includes five-piece round tube clamp with knob, Loc-Line connector, Loc-Line double socket f

Modularhose.com Spring Clamp Kit With Plate 1 Foot (Model 90665)

The ModularHose.com Spring Clamp Kit with Plate 1 Foot, model 90665, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit includes a round plate connected to a

Modularhose.com Spring Clamp Kit With Plate 2 Feet (Model 90667)

The ModularHose.com Spring Clamp Kit with Plate 2 Feet, model 90667, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit includes a round plate connected to a

Mount 'n Mover

The Mount 'n Mover is a wheelchair mounting kit for communicators, tablet or laptop computers, or a camera mount for wheelchair designed for use by individuals who use wheelchairs. The device can also be used to mount trays, easels, reading stands, remote controls and more. Available in single- or dual-arm horizontal models, the device is equipped with a quick-release mounting plate offering 0 to 90 degrees of tilt, a paddle to unlock the wrist joint to rotate the attached tray or device, and a

Neasy Swing Away Aug Com Mounting System

The NEasy Aug Com Swing Away Mounting System is a wheelchair mounting kit for communicators or lapboard mounting hardware designed fo use by individuals who use wheelchairs. This compact, heavy-duty modular mounting system for small to large devices or trays can be released and swung away by the user with only one or two pounds of pressure. Each swing away joint automatically locks into position with a stainless steel, spring-loaded pin at 0 degrees, 90 degrees (optional), and 180 degrees (optio

Portable Computer Mount

The Portable Computer Mount is a wheelchair mounting kit for communicators and portable computers. Designed to be mounted on the right or left side of the wheelchair, this unit fits most communicators and portable computers and can be adjusted to hold the device at the right height, position, and angle for comfortable operation. This mount can be folded out of the way when not in use, but is not designed to be moved independently by the user.

Profiler Mounting System

The Profiler Mounting System is a wheelchair mounting kit for communicators. This system mounts to wheelchairs, walkers, hospital beds, strollers, or tables. Lightweight and adjustable, the unit is available for mounting on square or round tubing (specify choice) and can be moved to the side with the lift of a single lever when not in use. This system accommodates most communicators and notebook computers. The unit supports up to 15 pounds. OPTIONS: A variety of mounting plates and release optio

Profiler-Lite Mounting System

The Profiler-Lite Mounting System is a wheelchair mounting kit for communicators or switch mounting hardware. This system mounts to wheelchairs, walkers, hospital beds, strollers, or tables with square, oblong, or round tubing. This system accommodates lightweight communicators and most switches and supports up to five pounds, including pressure on the device. The unit can be mounted on the right or the left side and the universal base mount can be adjusted 360 degrees from front to back and 180

Quick Release Mount (Model Qrm-2)

The Quick Release Mount, model QRM-2, is an accessory for mounting communication devices on wheelchairs. The mount holds the device firmly, yet allows removal with a flip of a lever. The mount is standard on most Prentke Romich mounting systems. OPTIONS: Adapters are available for Prentke Romich devices that use mounts from earlier wheelchair communication mounting kits, or any other mounting system using a 7/8 inch bar.

Ram Mounts Ez-On/off Flexible Seat Clamp Mount

The RAM Mounts EZ-ON/OFF Flexible Seat Clamp Mount is a stand for a tablet computer, cell phone holder and a computer mounting kit for wheelchair designed for use by individuals with use of only one hand, or mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This mount consists of a universal mount with clamp and 2.5-inch diameter ball base, an 18-inch flex rod, a single socking mounting system, and a custom high strength composite non-locking cradle holder for the

Slim Armstrong Mounting System

The Slim Armstrong Mounting System is a mounting system for communication devices or switches that can be attached to wheelchairs, bed frames, tables or trays for activities at home, school, work and in the community. The device has a slender, telescoping arm that holds up to 5 pounds. The system includes the following components: a clamp for anchoring on most curved or flat surfaces, a ball joint, a flexor rod with built-in ball joint, a telescoping arm, and a small triangular mounting plate. T

The Communication Station

The Communication Station is a wheelchair mounting kit for communicators designed to clamp an augmentative device to a wheelchair for individuals who are non-verbal and use a wheelchair. It is designed to "lock in" communciation devices at the right height, position and angle. The monoclamp is the key to the Communciation Station and can be configured in various combinations with almost limitless possibilities. The family of mounts can adapt any device to the left or right side of any wheelchair

Tilt'n Turner

The Tilt 'n Turner is a communicator or computer mounting kit for wheelchair or a camera mount for wheelchair designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. The device can also be used to mount trays, easels, reading stands, remote controls and more. The device is equipped with a quick-release mounting plate offering 0 to 90 degrees of tilt and a paddle to unlock the joint to rotate the attached tray or device 360 degrees. There are 12 memor

Wheelchair Mounting Kit (Wcmk)

The Wheelchair Mounting Kit (WCMK) is a wheelchair mounting kit for communicators designed for use by individuals with communication disabilities who use wheelchairs. This stong, durable mounting systemcan be attached to either side of the wheelchair and uses a Daessy mounting clamp making the entire assembly removable as needed. The included collar allows the mount to rotate and lock to the front and side when not in use. Tubing styles include round, square, and 525 Quickie. DIMENSIONS: The ava

Parent Category: Communicators General
 
Processing...


Driving Walking/Biking Public Transit  Get Directions