Trays and Bed Tables

Results: 42

Able Table

The Able Table is a height-adjustable tilt-top work table and overhead bookholder designed for use by individuals who use wheelchairs or eith severe physical disabilities or spinal cord injury. This unit lifts books for eye-level or overhead reading within a range of 9 to 18 inches high. Springs provide the lifting power. The unit is designed so that the book will stay where placed: up or down, left or right, at any angle without adjustment of knobs or levers. A single knob locks the top in plac

Activity Tray

The Activity Tray is a height adjustable tray designed for use by people with upper extremity, fine motor, grasping or neurological disabilities or conditions such as multiple sclerosis, cerebral palsy or Parkinson's. Made of rugged ABS, the Activity Tray can be set at any of 4 available heights by pulling the easy-open handle. The tray has two recessed cutouts for placing mugs or cups and can be used to place food and drink closer to a person's mouth. The Activity Tray can be reversed so that

Adjustable Wooden Bed Tray (Model Ha-4801)

The Adjustable Wooden Bed Tray, model HA-4801, is a bed tray designed for use by individuals with mobility disabilities. This table has legs that fold out to allow the tray to be placed across the lap. The tray is adjustable to five different angles for reading, writing, and other activities, and it is laminated to allow easy cleaning. DIMENSIONS: 480 x 340 x 20 millimeters. WEIGHT: 1.5 kilograms.

All Purpose Table (Model F712)

The All Purpose Table, model F712, is a bed tray with a tilt top that will fold flat. It has clips for holding books or papers, and a laminated top with a lip at the front edge. DIMENSIONS: 12 x 18 x 17 inches.

Armchair Tray.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Tray to fit close to the body and rest on the arms of an armchair, held in place with elastic straps. Plywood tray about 18 inches deep and wide enough to fit across the arms of the chair, with extensions on the bottom to keep it from slipping sideways; an edge across the front; a semicircular cutout to fit around the body; and elastic car roof rack straps to keep it from slipping forward. Lists materials needed and provides instructions and drawings.

Assist-A-Tray

The Assist-A-Tray is a transfer aid and a swiveling tray for an armchair or sofa designed for use by individuals with balance or mobility disabilities. The unit features a sturdy, ergonomically designed handle for assistance when getting in or out of a sitting position and a multi-use swivel tray with cup holder and utensil compartment. The unit can be used on the right or left side of a chair or couch and the base slides underneath the furniture. The base has four feet with rubber pads to ensur

Automatic Overbed Table (Model P2600)

The Automatic Overbed Table, model P2600, is designed for use by individuals who spend extended periods in bed. This height-adjustable table features a melamine laminated top, a C-shaped open base to slide under the bed or accommodate a wheelchair, and four swivel casters for mobility. The height adjusts with fingertip pressure. DIMENSIONS: The casters are 2 inches in diameter.

Bed And Lap Tray (Model P5001)

The Bed and Lap Tray, model P5001, is a bed tray designed for use by individuals with mobility disabilities. Made of wood, this tray has a laminated top that tilts for reading or writing or lies flat for eating. Adjustable legs allow the tray to be used in bed, in a wheelchair, or in a lift chair.

Bed Desk

The Bed Desk is a bed tray, bookholder, and laptop/notebook computer support designed for use by individuals with mobility, upper extremity, or severe physical disabilities or spinal cord injury. This unit is a book stand with legs like a bed tray. The two legs are collapsible and the desk can be adjusted to an angle for holding books, paper, or magazines. Made of imported Baltic birch, the unit supports up to 20 pounds and can be used with the legs extended or folded. When the legs are folded,

Bed Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Bed tray with larger top than commercially available bed tables. Instructions for a bed table with a large top. Cutout for body, rim on three sides. Material list and diagram showing dimensions. Includes drawing and photograph.. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D. TITLE: Easy To Make Aids For Your Handicapped Child. REF: Book: Englewoods Cliffs, NJ: Prentice-Hall Inc: p 114-115. NARIC CALL NUMBER: R1798 1982.

Bedside Table

CUSTOM ADAPTATION PURPOSE: To provide custom adaptation to bedside table for an individual with rheumatoid arthritis. A plywood box was constructed and screwed into an existing table top. The inside of the box forms a lower shelf, and the top forms the upper one. Inside the box, a shelf mounted on drawer runners was added. The shelf has a small hook-style handle in the center for easy, out of the way use. A small gap all the back of the box accommodates cords for various equipment. A larger hol

Comfylap

The Comfylap is a bookholder, bed tray, and laptop computer table designed for use by individuals with mobility, neurological, or upper extremity disabilities. This lightweight, rectangular table is supported two legs, each of which has two locking joints in addition to the locking joint that connects the table to the leg. Each joint has an angle lock button. All of the joints can be adjusted so that the table can be used at a variety of heights and angles to provide a surface to serve as a lapt

Diy Adjustable Tray

---- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself adjustable tray for a child with severe disabilities to use drawing, coloring, etc. This DIY tray is a PVC frame with a leg in the middle to allow for angle adjustment. The tray is created from a piece of shower board which is cut to the size needed. The child is then measured and a cutout added to go around the child. The PVC frame is a little smaller than the tray itself and is attached to the tray using Velcro. A drill an

Duro-Med Plastic Bed Tray (Model 4070)

The Duro-Med Plastic Bed Tray, model 4070, is designed of heavy duty plastic with folding legs and a recessed well for glass. DIMENSIONS: (W x L x H) 15 1/4 x 21 3/4 x 8 1/2 inches. COLORS: almond, blue, white.

Easy Adjust Overbed Table (Model 6411)

Chrome plated square tubular leg and base, 4 casters. Spring tension height adjustment with positive corner lock, 27 to 44 high. Table surface, 15 by 30 inches. Tilts either direction, plunger release lock, 5 positions.

Edutray

The Edutray is a tray for armchair designed for use with an an Educube (see separate entry) to provide a play or eating surface close to the child. The legs fold for storage. DIMENSIONS (LxW): 21 x 14 inches. WEIGHT: 7 pounds. COLOR: Blue and white.

Ez Care Height Adjustable Overbed Table (Model Ez-110550)

The EZ Care Height Adjustable Overbed Table, model EZ-110550, is designed to provide eating and work space for individuals who are in bed for extended periods or who use wheelchairs. This height-adjustable table has an open frame base to slide under the bed or for wheelchair accessibility. The table has a laminate top and an H-frame base with four swivel casters. It can be turned for either right- or left-hand use. The height is adjusted using a one-touch release lever, and gentle pressure on th

Ez Care Height Adjustable Pivot And Tilt Overbed Table (Model Ez-110500)

The EZ Care Height Adjustable Pivot and Tilt Overbed Table, model EZ-110500, is designed to provide eating and work space for individuals who are in bed for extended periods or who use wheelchairs. This table has an open frame base to slide under the bed or for wheelchair accessibility. It has a laminate top and a C-frame base with four swivel casters. The table is supported by a height-adjustable column that angles upward toward the user from the right side of the frame. The table top tilts to

Feeding Tray.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Feeding tray which fits against the child, will not slide away, and holds a plate in place. Instructions for building a table-top feeding tray of plywood (12 by 12 inches) with a rounded cutout on one side to fit against the child, a batten fastened on the underside, without interfering with the cutout, to keep it from sliding away, and 4 wood plate stops with turn buttons to hold the plate in place. Includes list of materials and drawings. SKILLS REQU

Flip-Up Table

CUSTOM ADAPTATION PURPOSE: To provide a mobile table that can be moved close enough to a person seated in an armchair to be used for eating or working. Elongate the crossbar of the base of a hospital bedside table to increase the width of the base to be slightly wider than an armchair. If necessary, lengthen the table's vertical support to adjust the table's height. MATERIALS: One hospital bedside table and additional tubing. TITLE: Doing It Yourself. AUTHOR: Wechsler, K. JOURNAL: Quest. WEB SI

Folding Bed Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Bed table which can be folded flat for storage. Instructions for building a bed table with hinged legs. The table is made of plywood. Includes diagrams, drawings and photographs. SKILLS REQUIRED: Woodworking. AUTHOR: Grainger, S E TITLE: Making Aids for Disabled Living REF: North Pomfret, Vermont: Batsford: p 80-86 NARIC CALL NUMBER: R1126 PAGES (including cover): 8 1981.

H Base Overbed Table (Models 11600 & 11610)

The H Base Overbed Table, models 11600 and 11610, is an overbed table designed for use by individuals with mobility or severe physical disabilities. The table has a four point H-shaped base with four dual wheel nylon casters, two of which lock. Plastic glides are also included to replace the casters. The table also features spring-loaded height adjustment. DIMENSIONS(LxW): 26.38 x 15.25 inches (base); 30 x 15 inches (tabletop). The height of the table adjusts from 26.75 to 43.25 inches. CAPACITY

Lap Desk

DO IT YOURSELF ENTRY --- PURPOSE: To provide a writing or work surface for individuals using a wheelchair or who are unable to use a desk for long periods. Included in a chapter entitled "Living Room & Leisure Activities," this article provides detailed instructions with illustrations for making a lap desk from Luan plywood. A prototype of the desk is cut out of corrugated cardboard to determine the proper dimensions for the chair with which the lap desk will be used. When complete, the desk

Laptop Laidback Ergonomic Laptop Table

The Laptop Laidback Ergonomic Laptop Table is a bed desk that allows laptop users to be completely reclined. The height and angle of the laptop table surface can be micro-adjusted to accommodate an individual’s body size and arm length. The ergonomic design of this laptop table keeps the user's arms and elbows in a flat resting position while allowing the palm and fingers to lie flat on the keyboard.

Low H Base Overbed Table (Model 11640)

The Low H Base Overbed Table, model 11640, is an overbed table designed for use by individuals with mobility or severe physical disabilities whose bed has low clearance. The table has a four point H-shaped base with four dual wheel nylon casters, two of which lock. Plastic glides are also included to replace the casters. The table also features spring-loaded height adjustment. DIMENSIONS(LxW): 26.38 x 15.25 inches (base); 30 x 15 inches (tabletop). The height with casters adjusts from 19.75 to 2

Mjm Portable Overbed Table With Casters (Model 699-F3)

The MJM Portable Overbed Table with Casters, model 699-F3, is an overbed table designed for use by individuals with severe physical disabilities or spinal cord injury. The frame is made from PVC plastic. DIMENSIONS (HxLxW): 28.5 x 46 x 19 inches. The table top is 19 x 25 inches.

Mobile Open Toe Overbed Table (Model 251C)

The Mobile Open Toe Overbed Table, model 251C, is an overbed table designed for individuals who spend long periods of time in bed or who use wheelchairs. Constructed of durable plastic- coated one-inch tubing, this height- and tilt- adjustable table has a U-shaped base with casters and a laminated teak wood top with raised edges on each side. Two durable plastic hand wheels enable the user or caregiver to raise or tilt the table allowing the top to be set at varying heights and angles. DIMENSION

Multi-Purpose Table

The Multi-Purpose Table is an overbed table designed to permit activities and eating while in bed. This table has a metal C-shaped base with casters and a two-section, height-adjustable table top. The table has a small stationary section and a larger tilt-top section with a plastic lip to prevent items from sliding or rolling off. DIMENSIONS: The height adjusts from 27 to 42 inches. The table top is 15 x 30 inches.

Multi-Purpose Table

The Multi-purpose Table is designed to provide eating and work space for individuals who are in bed for extended periods or who require a mobile work surface. This height-adjustable table can be used over chairs or bed and features a wipe-clean Formica top that can be used flat or tilted up to 180 degrees and a wooden T-shaped base with three casters. DIMENSIONS: The height adjusts from 29 to 38 inches. The table surface is 25.5 x 14.5 inches. WEIGHT: 25 pounds. COLOR: Woodgrain top.

Non-Slip Tray (Model Ha-4255)

The Non-Slip Tray, model HA-4255, is designed for use by individuals with balance, neurological, or upper extremity disabilities. This tray holds items without slippage at angles of up to 30 degrees. The tray is made with layers of wood veneer combined with synthetic resin to provide strength, with a non-slip coating which prevents items from sliding. DIMENSIONS: 360 x 280 millimeters. WEIGHT: 230 grams.

Over The Bed Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Over the bed table which can be used for hobbies or building small items. Wood table with edges on three sides. Provides a list of the pieces of wood needed and includes a diagram of how the table is put together. Exact size depends on the height of the bed and the person seated in it in a working position, and the width of the bed. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Aids for Elderly People REF: London, England: Souveni

Overbed Table

The Overbed Table is designed to provide eating and work space for individuals who are in bed for extended periods or who use wheelchairs. This height-adjustable table has an open frame base to slide under the bed or for wheelchair accessibility. The table has a wipe-clean laminate top with a built-in cup holder, and a C-frame base with four swivel casters. It can be converted for either right-hand or left-hand use. DIMENSIONS: The height adjusts from 28.25 to 42.25 inches. The table surface is

Overbed Table (Model 1010C)

Model 1010C is an overbed table with a laminated top, steel frame, and 1.5-inch ball bearing casters. Table height is automatically adjustable from 28 to 45 inches. The adjustment mechanism is spring-loaded to lift with slight upward pressure. A release lever will adjust the table height downward. Supports up to 50 pounds. Brakes are an available option. DIMENSIONS: Top surface is 15 x 30 inches.

Overbed Table (Model 1050)

Model 1050 is a tilt-top overbed table with a laminated top, chrome plated steel frame, and 1.5-inch hooded ball casters. The top surface tilts in both directions to maximum of 22 degrees for food service, reading, and craft work. DIMENSIONS: Top is 15 x 30 inches; height adjusts from 29 to 44 inches.

Overbed Table (Model 925)

Model 925 is a tilt-top overbed table with a laminated top, chrome plated steel frame, and 1.5-inch hooded ball casters. The top tilts to 22 degrees in either direction for food service, reading, and craft work. DIMENSIONS: Top surface is 15 x 24 inches, height is adjustable from 25.5 to 39 inches.

Overbed Table (Models 3000 & 4000)

Model 3000 and Model 4000 are overbed tables. Each has a laminated top, steel frame, and 1.5-inch ball bearing casters. Model 3000 has semi-automatic height adjustment from 30 to 45 inches; Model 4000 has fully automatic height adjustment. A spring-loaded positioning lever allows the table to be positioned in any of 16 slots with 1-inch increments. The tables will support up to 100 pounds. DIMENSIONS: Top surface is 15 x 30 inches.

Play Tray.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Tray to protect table top or floor while child plays. Plywood tray 12 by 24 inches with 2 inch edging around 3 sides, and strips cut from a cork tile glued on the underside. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Toys for Your Handicapped Child REF: London, England: Souvenir Press: p 158-159. Also available from Prentice-Hall, Englewoods Cliffs, NJ. NARIC CALL NUMBER: R3463 PAGES (including cover): 2 1983.

Rubbermaid Adjustable-Height C-Frame Overbed Table

The Rubbermaid Adjustable-Height C-Frame Overbed Table is designed to provide eating and work space for individuals who are in bed for extended periods or who use wheelchairs Constructed of molded composite plastic, this height-adjustable table has a C-frame base to slide under the bed or for wheelchair accessibility. The table converts for right-or left-handed use and features a large wipe-clean worksurface with a molded-in cup holder and four easy-roll casters. DIMENSIONS: The height adjusts f

Swing-Away Table

The Swing-Away Table is an accessible table designed for use by individuals with mobility disabilities. This height-adjustable table has a tubular steel base that sides under a bed or chair for stability; a braclet to grasp a chair arm for additional security. The tabletop swings a full 360 degrees for proper positioning as needed or to move out of the way for transfers. DIMENSIONS: The height adjujsts from 21 to 33 inches and the top of the table is 18 inches in diameter.

Table For Use In Bed

CUSTOM ADAPTATION PURPOSE: To provide a custom adaptation for a table for use in bed to hold remote controls for an individual with quadriplegia. A small table with a small cushion at the based filled with polystyrene beads was made. The cushion is medium stuffed so that it is very stable and will stay in the position it is pushed into. A table top was made from a plywood base with a lip around all four sides to prevent items from falling off. A piece of non-slip mat was added to the table but

Tip 'n Grip Tray

The Tip 'N Grip Tray is a non-slip tray designed for use by individuals with balance, mobility, or upper extremity disabilities. The non-slip surface ensures that items placed on the tray will not slide under normal use. Available in rectangular or oval styles, the tray is dishwasher safe and the non-slip surface is designed not to wear off. DIMENSIONS: The rectangular tray is 18 3/4 x 14 7/8 inches and the oval tray is 22 3/4 x 14 3/4 inches. COLORS: Rectangular tray is cream color. Oval tray i

U Base Overbed Table (Models 11620 & 11630)

The U Base Overbed Table, models 11620 and 11630, is an overbed table designed for use by individuals with mobility or severe physical disabilities. It has a four point, U-shaped base with four dual wheel nylon casters, two of which lock. The U-shaped base allows this table to fit in areas with restricted space. The table also has spring-loaded height adjustment. DIMENSIONS (LxW): 26.38 x 15.25 inches (base); 30 x 15 inches (tabletop). The height of the table adjusts from 26.75 to 43.25 inches.

 
Processing...


Driving Walking/Biking Public Transit  Get Directions