Height Adjustable Work Table

Results: 58

Able Table

The Able Table is a height-adjustable tilt-top work table and overhead bookholder designed for use by individuals who use wheelchairs or eith severe physical disabilities or spinal cord injury. This unit lifts books for eye-level or overhead reading within a range of 9 to 18 inches high. Springs provide the lifting power. The unit is designed so that the book will stay where placed: up or down, left or right, at any angle without adjustment of knobs or levers. A single knob locks the top in plac

Accella Series (Models 6030, 4830 & 6024)

The Accella Series, models 6030, 4830, and 6024 are computer work centers and height-adjustable work tables designed for use by individuals who use wheelchairs. The height adjustment, which is accomplished using the built-in hand crank, also provides access for individuals who stand or use standing aids while working. The hand crank is located underneath the tabletop and folds out of the way when not in use. The standard table has a laminate top, anodized aluminum pedestal, and steel feet. OPTIO

Active Life Station

The Active Life Station is an accessible table designed for use with children and adults with severe cognitive, emotional, or physical disabilities who require constant supervision. This table system surrounds the user on all sides, with one side being a secure access door. The individual's wheelchair or feeder seat is positioned on a 360-degree rotating base in the center, enabling the user to access table surfaces on all sides. The station can be used for watching television, using a computer,

Adjustable Desk With Storage

The Adjustable Desk With Storage is a height adjustable desk designed for use by individuals who use wheelchairs. This desk has a large work surface with a curved cutout for accessibility. An attached vertical storage shelf/box is located on the side to provide knee space. The height adjusts using a knob-style column lock on the legs. DIMENSIONS (LxW): The top measures 40 x 24 inches. The height adjusts from 23 to 33 inches. COLOR: Maple finish laminate top with almond powder-coated base. WARRA

Adjustable Floor Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Floor table adjusts to set work area at proper height and angle for child. Plywood table with 12 inch by 18 inch top. Upper side panels measure 8 inches by 12 inches; lower side panels measure 10 inches by 12 inches. Double side panels allow user to adjust height and angle. Softwood edge can be added around front and top sides. A cutout can also be added. To determine the correct size and shape of the cutout, bend a piece of coat hanger or other soft w

Adjustable Height Individual Cut Out Work Table (Model 372)

The Adjustable Height Individual Cut Out Work Table, model 372, is an adjustable height work surface with a large cutout and raised rim on 3 sides. The legs are made with chrome plated steel. Top is 24 by 24 inches with 12 by 15 inch cutout. Height adjusts from 22 to 35 inches. Other size cut outs are available on request at additional cots.

Adjustable Leg Work Table (Models 42-254/3D, 42-255/0D, & 42-256/8D)

Adjustable height work table. Laminated plastic top table on 1 1/8 inch thick high density particle board. Height adjusts 22 to 30 inches in 1 inch increments. 2 tubular steel legs with supports. Variety of table sizes.

Adjustable Work Carrel.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Work carrels, one with an adjustable work surface, the other with a hinged work surface to allow variation in placement including people needing to use their feet. Three sided carrel with adjustable height horizontal surface. A second version has a segmented hinged work surface to allow additional variations. Detailed assembly drawings are shown. They have been represented in a very small font. Contact developer for larger prints. COMMENTS: For additio

Bedside Computer Stand

CUSTOM ADAPTATION PURPOSE: To enable an individual with spinal cord injury to utilize a computer from a bed. The base of the stand is a standard overbed table on a wheeled base. A box of varnished plywood on a caster base was added to the table. The box was equipped with a central shelf, creating three surfaces on which to store computer equipment and other items. The original table surface was attached to the side of the box and is height adjustable using a trinut. The surface also rotates so

Bi-Level Computer Workstation

The Bi-Level Computer Workstation is a height-adjustable computer table designed for use by individuals who use wheelchairs. The height adjustment range starts low for young children or those using manual wheelchairs, and the height adjusts sufficiently to provide ample knee and arm-rest clearance for powered wheelchair users. Two hand cranks allow both work surfaces to be adjusted independently for correct view-height and balance between keyboard and monitor. DIMENSIONS (HxLxW): The keyboard su

Ctl Series Classroom Table

The CTL Series Classroom Table is a height-adjustable classroom table and computer work station designed for use by children who use wheelchairs. This table can be used in school computer labs. The work surface is made from high-density laminated wood and is supported by a powder-coated steel frame. OPTIONS: Enclosed CPU holder; keyboard drawer; keyboard arm and tray; modesty panel; wheel kit; surge protector; cable management kit; table to table cable connection kit; floor to table cable connec

Daessy Accessible Workstation - Single Surface Table

The Daessy Accessible Workstation - Single Surface Table is a height-adjustable computer desk designed for use by individuals with mobility disabilities, spinal cord injury, or low vision. The height-adjustable work surface makes this table accessible to a user seated in a wheelchair, while an optional keyboard surface allows users with low vision closer access to a monitor located on the main surface. The frame is made from welded, plastic-coated tubular steel, and the table surface is made fro

E-Desk

E-desk is designed for individuals needing to modify the height of their work surface to reduce repeated stress injuries caused by monotonous movements. This desk can be used by people of different heights needing to work comfortably at the same desk. The E-desk has a range of desk tops: rectangular, wave or conference styles. The surface is available in veneer or melamine finishes. It is also fitted with height control pad and cable management holes. The desk legs are available in ‘T’ legs,

E-Z Glide Series Adjustable Table Bases

The E-Z Glide Series Tables are accessible tables and adjustable-height work tables designed for people who use wheelchairs. The 1700 Series adjusts from child to adult height, the 1800 Series adjusts from standard to wheelchair height, and the 1900 Series adjusts from restaurant to bar height with a stop at standard wheelchair height. The E-Z Glide mechanism incorporates a patented design and gas cylinders to facilitate table adjustment. A knob adjustment allows the tables to change heights and

Electric Height Adjustable Activity Table

The Electric Height Adjustable Activity Table is a powered height adjustable work table designed for use by individuals who use wheelchairs. Height adjustment is achieved with push-button controls. Both models have a laminate top and an extruded aluminum base. DIMENSIONS (HxLxW): 27 to 39 x 48 x 30 inches or 28 to 34 x 60 x 30 inches. COLOR: Maple top. WARRANTY: Two-year warranty.

Electric Work Table (Model 4375)

The Electric Work Table, model 4375, is a powered height adjustable work or therapy table designed for use by wheelchair users. This height-adjustable table has a direct-drive lift mechanism that elevates the tabletop and a pedestal design that allows wheelchair access, and a hand-control panel mounted on the underside of the tabletop. The table has a high-pressure laminate top with a natural oak finish and protective molding along the edges. It can can accommodates two wheelchairs and up to fiv

Equity (Model 1317)

The Equity, model 1317, is a bi-level computer work center and height adjustable work table designed for use by individuals who use wheelchairs in schools, colleges, and other multi-user environments. The height adjustment, which is accomplished with a retractable hand crank, provides access for individulas who stand or use standing aids while working. The worksurface/ keyboard level and the upper monitor level are independently height adjustable. The standard table has laminate tops, anodized a

Equity (Model 4240)

The Equity, model 4240, is a bi-level computer work center and height adjustable work table designed for use by individuals who use wheelchairs in schools, colleges, and other multi-user environments. The height adjustment, which is accomplished with a retractable hand crank, provides access for individuals who stand or use standing aids while working. The worksurface/ keyboard level and the upper monitor level are independently height adjustable. The standard table has a laminate tops, anodized

Equity (Model 4830)

The Equity, model 4830, is a single-surface computer work center and height adjustable work table designed for use by individuals who use wheelchairs in schools, colleges, and other multi-user environments. The height adjustment, which is accomplished with a retractable hand crank, also provides access for individuals who stand or use standing aids while working. The standard table has a laminate top, anodized aluminum pedestal, and steel feet. OPTIONS: Solid wood veneers, PVC vinyl edge treatme

Flaghouse Height Adjustable Personal Worktable

The Personal Worktable is a height-adjustable work table designed for use by children and adults who use wheelchairs. It can be used as an accessible desk or small activity table. The table height is adjusted by turning the admustment knobs on the legs. DIMENSIONS(HxLxW): The height can be adjusted from 23 to 33 inches and the work surface measures 36 x 30 inches. COLORS: Maple finish laminate top with almond powder-coated base.

Flextable (Model A)

The FlexTable, model A, is an adjustable height tilt top table designed for use by individuals with lower extremity or mobility disabilities and others with special seating needs. This table, which is designed to accommodate four people, has four height-adjustable work stations mounted on the ends and each side of a rectangular base. The side stations also tilt. The end stations are removable. The base rests on 4 4-inch lockable casters so the table can be positioned as needed. DIMENSIONS (LxW)

Flextable (Model B)

The FlexTable, model B, is an adjustable height tilt top table designed for use by individuals with lower extremity or mobility disabilities and others with special seating needs. This table, which is designed to accommodate six people, has six height-adjustable work stations mounted on a rectangular base, one on each end and two on each side. The side stations also tilt. The end stations are removable. The base rests on 4 4-inch lockable casters so the table can be positioned as needed. DIMENS

Flextable (Model C)

The FlexTable, model C, is an adjustable height tilt top table designed for use by individuals with lower extremity or mobility disabilities and others with special seating needs. This table, which is designed to accommodate eight people, has eight height-adjustable work stations mounted on a rectangular base, one on each end and three on each side. The side stations also tilt. The end stations are removable. The base rests on 4 4-inch lockable casters so the table can be positioned as needed.

Generation Iv Adjustable Work Tables

Generation IV Adjustable Work Tables are height adjustable work tables designed to provide a completely accessible work station for individuals with a physical disability. These work tables are ideal in that they offer individuals a maximum design of flexibility and adjustability which includes working in a sitting or standing position. They are available as rectilinear or corner - bilevel or single surface tables. Bilevel tables allow you to adjust the height of the keyboard and the VDT height

Height Adjustable Table

The Height Adjustable Table is a height adjustable work table designed for use by individuals with low vision for comfortable viewing of a video magnfier/CCTV. This wide table offers space for moving a CCTV viewing tray while holding papers and other materials. DIMENSIONS (LxWxH): 24 x 48 x 22.5 to 32 inches.

Horseshoe Therapy Table

The Horseshoe Table is a wheelchair-accessible manual height adjustable therapy table designed for clinic use. The Horseshoe-shaped table accommodates up to four users in wheelchairs and is equipped with seven height-adjustable metal legs and a plastic-laminated top with a cutout. DIMENSIONS: The cutout is 30 x 36 inches and the height adjusts from 26 to 34 inches.

Individual Tilt Work Table (Model Pc 5358-02)

The Individual Tilt Work Table, model 535802, is a height adjustable, accessible tilt-top work table designed for use by people who use wheelchairs. The manual crank adjusts the height of the telescoping legs and the top tilts to any angle between 0 and 50 degrees to accommodate tasks and individuals. The unit includes the table and a tray/shelf extension with a cut out. DIMENSIONS: The tabletop is 35 x 24 inches and the tray attachment is 11 inches. The height adjusts from 22 to 30.5 inches.

Infinity Series (Models 6030, 4830, & 6024)

The Infinity Series, models 6030, 4830, and 6024 are computer work centers and height adjustable work tables designed for use by individuals who use wheelchairs. The motorized height adjustment is activated with a push button and also provides access for individuals who stand or use standing aids while working. The standard table has a laminate top, anodized aluminum pedestal, and steel feet. OPTIONS: Solid wood veneers, PVC vinyl edge treatments, casters, plastic glides/levelers, under desk com

Jobri Mobile Desk Caddy (Model F7300-Xx)

The Jobri Mobile Desk Caddy, model F7300-xx, is a height-adjustable tilt top table that can be used with a recliner or as a freestanding unit. This mobile desk caddy has multiple combinations of height and tilt adjustments, and can be used to hold a laptop or book or for writing. Locking casters help keep it in place and a full lip on the table top keeps items from sliding off. It holds up to 25 pounds. DIMENSIONS: The tabletop adjusts from 30 to 39.5 inches high with a table surface of 16 x 31

Kaye T-Tables (Models Tt-1 & Tt-2)

The Kaye T-Tables are tilt top tables designed for use with children with neurological or fine motor disabilities. Designed to be used in conjunction with Kaye Adjustable Benches, T-Seats, or Straddle Seats, these height-adjustable wooden tables have tilt tops equipped with tow large wooden clamps to properly psition books and papers and a removable wooden ledge to keep items from sliding off the table when tilted. The table top adjusts from horizontal to 90 degrees. Model TT-2 accommodates chil

Lil' Desk Mate

The Lil' Desk Mate is a height adjustable tilt desk designed for use by individuals with physical disabilities. This height-adjustable desk features a wide T-shaped base with locking casters and a two-section table top. The desk adjusts for right or left hand use. The smaller section of the table is fixed in a flat position, while the other can be used flat or tilted to support laptop computers, books, or papers. The Lil' Desk Mate's base can roll under most sofas, chairs or beds to position the

Manual Height Adjustable Work Table (Model 8858A)

The Manual Height Adjustable Work Table, model 8858A, is an accessible table or workstation designed for use by individuals who use wheelchairs. Made with double pedestals to accommodate wheelchair users, the table height adjusts by means of a fold-away hand crank extending from the pedestals. The table features a wide laminate top that allows for extra work space. OPTIONS: Maple, formica, or steel table tops are available. DIMENSIONS: The top is 36 x 60 inches and the height adjusts from 26 to

Manual Height-Adjustable Activity Table

The Manual Height-Adjustable Activity Table is an accessible table or computer workstation designed for use by individuals who use wheelchairs. The table height adjusts with a hand crank system. The table has a laminate top. DIMENSIONS (HxLxW): 27 to 39 x 48 x 30 inches or 27 to 39 x 60 x 30 inches.

Marathon Table

The Marathon Table is a height-adjustable computer workstation designed for use by individuals who use wheelchairs or who stand to work. Depressing a release paddle enables immediate, yet controlled, surface height positioning. A two-way brake locks the work surface in both upward and downward directions. For user safety, a weight-sensing interlock releases the brake only when the table is properly counterbalanced. Counterbalance supports loads between 75 and 225 pounds, allowing immediate adjus

Med Ii, Med Iie, Med Iif.

Accessible U shaped activity table. One piece molded fiberglass top is 18 inches wide with slate look finish. Available in standard colors; custom colors extra. Outer measurements are 72 inches wide by 48 inches deep; inner measurements, 36 inches wide by 30 inches deep. Med II has twin wheel casters, 2 locking and 3 nonlocking; five leg height adjustments from 27 inches to 33 inches. Med IIE has telescoping legs held in position with thumb screws; legs are equipped with plastic end caps. Med II

Med Iv Dining And Activity Table

Four place dining and activity table accommodates wheelchairs with elevated leg rests. Wheelchairs may be staggered or placed all on one side. Nickel chrome legs have twin wheel casters, 4 locking and 2 nonlocking. One piece molded top is heat and stain resistant; measures 104 inches by 20 inches; has slate look finish. Leg height adjusts to 27 inches, 28 1/2 inches, 30 inches, 31 1/2 inches or 33 inches. Available in standard colors; custom colors extra.

Midland Combination Work Table (Model 7081)

The Midland Combination Work Table, model 7081, is a height adjustable tilt top worktable designed for use by individuals who use wheelchairs. Designed for use with tilt table or wheelchair, this adjustable height table accommodates children and adults. The table top may be tilted to various positions with a 45 degree maximum tilt. Features include tubular steel frame mounted on 3- inch swivel casters with locks. DIMENSIONS: Height adjusts from 26 to 40 inches. Table top is 30 by 36 inches.

Midland Round Work Table (Model 8859F)

The Midland Round Work Table, model 8859F, is a height adjustable, swivelling work table designed to accommodate up to four wheelchair users. The table features a solid wood butcher block top on a metal pedestal with a hydraulic lift mechanism. DIMENSIONS: The height adjusts from 27.5 to 34 inches and the top is 48 inches in diameter. The base is 24 inches in diameter.

Model 100 Workstation

The Model 100 Workstation is a height adjustable desk or computer work center designed for use by individuals who use wheelchairs.The unit features a steel frame, a height-adjustable worksurface, an EasyRoll wheelchair platform, and a ramp. This desk is available with either manual hand crank or a motorized height adjustability of the worksurface. Hand crank models have a foldable hand crank (.5 inches of adjustment per revolution) and the motorized models have push button controls. The works

Model 200 Workstation

The Model 200 Workstation is a height adjustable desk or computer work center designed for use by individuals who use wheelchairs. The unit features an aluminum frame, a fixed height worksurface with a backsplash, an EasyRoll wheelchair platform, and a ramp. The worksurface is made from plywood with WilsonArt plastic laminate. The ramp and platform are covered in nonskid rubber. The workstation includes an EasyRoll wheelchair platform, which allows the user to move laterally for the length of t

Pediatric Adjustable Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Table which can be folded against the wall and can be adjusted in height from 18 1/2 to 32 1/2 inches so it can be used by children and adults. Describes hinged table which moves up and down a track on a backboard on the wall. The table can be adjusted by one person. Includes a drawing and photographs. SKILLS REQUIRED: Woodworking. AUTHOR: Rousseau, Y TITLE: Pediatric Adjustable Table JOURNAL: Canadian Journal of Occupational Therapy REF: Vol 51 no 3,

Personal Work Table With Tilt Top (Model 76-31K)

The Personal Work Table with Tilt Top, model 76-31K, is a height-adjustable tilt top work table designed for use by individuals who use wheelchairs. The top tilts from 0 to 50 degrees and is equipped with a lip on the front edge to keep objects in place. The legs are adjustable with an indexing plunger. OPTION: 3.5-inch locking dual-wheel casters. DIMENSIONS (HxLxW): 23 to 33 x 36 x 30 inches.

Reversable Activity/hand Therapy Table (Model 6272)

The ReversABLE Activity/Hand Therapy Table is a wheelchair- accessible manual height adjustable therapy table designed for clinic use. This table combines a hand therapy with an activity board and accommodates two users. The activity board inserts rotate 360 degrees and have a laminated surface on one side and an oak pegboard with 100 holes on the other; the inserts can be locked flat or at a 60-degree angle. A set of 200 easy-grip stackable pegs is included. DIMENSIONS: The front radius is 94 i

Rfi Multi-Use Desk / Table.

Adjustable height worktable from 21 to 34 inches. 44 inches wide by 24 inches deep. Red oak frame, contoured matching laminate work surface. Designed spill rail, prosthetic device holder, side mounted book caddy. Accommodates children and adults.

Sierra Electric Adjustable Workcenter

The Sierra Electric Adjustable Workcenter is a powered height adjustable computer work station designed for use by individuals who use wheelchairs, individuals of short stature, individuals who stand to work, and others who can benefit from a higher or lower work station. The surface height adjusts at 2 inches per second, with a lifting capacity of 250 pounds. The backlit liquid crystal display (LCD) control panel has tactile soft-touch control buttons and three programmable memory height preset

Single-Surface Height-Adjustable Work Station

The Single-Surface Height-Adjustable Work Station is a height-adjustable work table designed to accomodate both manual and powered wheelchair users. The height is adjusted using a hand crank which retracts out of the way when not in use. A comfort recess enables the user to get close to the table to maximize usable surface area. Casters provide mobility. OPTIONS: Articulating keyboard arm. DIMENSIONS (HxLxW): The work surface is 48 x 30 inches. The height is adjustable from 24 to 34 inches. COLO

Theradapt Extended Easel

The Theradapt Extended Easel provides a working surface that facilitates the use of many seating systems, standers and mobility devices. The TherAdapt Extended Easel is designed with a 25 degree angle setting for the working surface; however, you can adjust the height from horizontal to a 60 degree angle for proper eye gaze and erect trunk and head positioning. Users have the ability to choose the correct leg size for their easel.

Therashape Group Table

The Therashape Group Table is a therapy table designed for use by individuals who use wheelchairs or in activities requiring close proximity to the table. The table is curved with cut out areas to accommodate three individuals. The table is height-adjustable using hand knobs and the steel powder-coated legs feature knob-style column locks and six adjustable base levelers. DIMENSIONS: The table adjusts in height from 23 to 33 inches. Each of the cut-out areas is 18 inches wide x 10 inches deep. T

Therashape Table

The Therashape Table is a therapy table designed to be used as a treatment, feeding, or activity table for any healthcare setting. This table accomodates four to five individuals. Three adjustable legs provide seating room and access, and offer height adjustments. The legs feature knob-style column locks, 5 adjustable base levelers, and a steel column. DIMENSIONS (LxW): The table top measures 72 x 28 inches. Table height can be adjusted from 23 to 33 inches. COLOR: Maple-finished high-pressure l

Uplift 900 Electric Sit-Stand Desk Base

The Uplift 900 Electric Sit-Stand Desk Base allows an existing desktop to transform into an electric standing desk. The adjustable height base provides the user with 26 inches of start and stop electric height adjustment and features an LED handset switch with four memory presets, letting you go from sitting to standing quickly and efficiently.

Vision

Vision is a height-adjustable table that has not cross braces underneath the surface. It is designed for individuals who use a wheelchair for mobility. The Vision is a mobile table that can be adjusted manually or electrically. The adjustable surface is available for dual or single users.

Vox Adjustable Workstation-Bi-Level Corner

The Vox™ Series by POPULAS is designed to accommodate various work heights for individuals of all sizes in a variety of work industries. It is designed to increase circulation, spine health, user productivity and interpersonal interactions. Vox™ workstations eliminate the cross brace, allowing ultimate knee space and complete freedom of movement. It is equipped with a push-button powered adjustment that has been designed to operate smoothly with minimal noise. It is built with extruded alumi

Vox Adjustable Workstation-Bi-Level Rectangle

The Vox™ Series by POPULAS is designed to accommodate various work heights for individuals of all sizes in a variety of work industries. It is designed to increase circulation, spine health, user productivity and interpersonal interactions. Vox™ workstations eliminate the cross brace, allowing ultimate knee space and complete freedom of movement. It is equipped with a push-button powered adjustment that has been designed to operate smoothly with minimal noise. It is built with extruded aluminum

Vox Adjustable Workstation-Corner

The Vox™ Series by POPULAS is designed to accommodate various work heights for individuals of all sizes in a variety of work industries.It is designed to increase circulation, spine health, user productivity and interpersonal interactions. Vox™ workstations eliminate the cross brace, allowing ultimate knee space and complete freedom of movement. It is equipped with a push-button powered adjustment that has been designed to operate smoothly with minimal noise. It is built with extruded aluminum

Vox Adjustable Workstation-L Shape

The Vox™ Series by POPULAS is designed to accommodate various work heights for individuals of all sizes in a variety of work industries. It is designed to increase circulation, spine health, user productivity and interpersonal interactions. Vox™ workstations eliminate the cross brace, allowing ultimate knee space and complete freedom of movement. It is equipped with a push-button powered adjustment that has been designed to operate smoothly with minimal noise. It is built with extruded aluminum

Welded Frame Science Table, Round Legs (Model A3080-99)

The Welded Frame Science Table, Round Legs, model A3080-99, is a height adjustable work table and adapted student desk designed for use by individuals with lower extremity and mobility disabilities or spinal cord injury and others who use wheelchairs. This table has a welded steel frame and a chemical-resistant EcoStone top that is made from 100% post consumer recycled materials. DIMENSIONS (HxWxD): 29 (minimum) x 60 x 24 inches. WARRANTY: Lifetime warranty.

Wheelchair-Accessible Mobile Workstation (Models W53191 & W53192)

The Wheelchair-Accessible Mobile Workstation is a height-adjustable work table designed for use by individuals who use wheelchairs in schools, training centers, and offices. The work surface is mar-resistant laminate with rounded corners edged with protective vinyl molding. Its open design allows access to and from work surface. The tabletop height is adjustable to accomodate a variety of users. The unit features four casters, two with locking brakes. DIMENSIONS: The height adjusts in one-inch i

Worktable With Support For Standing.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Adjustable work table provides extra support and balance needed to prevent employees from falling. Particularly useful for lower extremity amputees. Wooden table top consists of wide hinged armrests and a safety belt. Four adjustable 7/8 inch metal pipes run through standard work bench to serve as legs. Includes photograph and diagram. COMMENTS: Submitted by the Occupational Therapy Department, Institute of Physical Medicine and Rehabilitation, New Yor

Parent Category: Tables
 
Processing...


Driving Walking/Biking Public Transit  Get Directions