Supine Stander

Results: 20

EasyStand Zing Multi-Position Stander

The EasyStand Zing Multi-Position Stander (MPS) is a pediatric stander designed for use by children with limited lower extremity mobility as a result of cerebral palsy, dystonia, muscular dystrophy, traumatic brain injury or stroke.  It allows a child to move from a full supine to prone position without having to change, turn or flip pads and foot plates or transfer a child in and out of the stander. In one fluid motion, the child can be positioned between supine, upright and prone positions. It

Easystand Zing Supine

EasyStand Zing Supine™ is designed for use by children 44 inches tall and weighing up to 70 pounds who require assistance and support while standing as a result of cerebral palsy, muscular dystrophy, traumatic brain injury, genetic disorders, or stroke. Contractures can be accommodated through the use of multi-adjustable knee pads, multi-adjustable calf pads, and multi-adjustable foot plates that supports the natural range of motion and placement.  

Jenx Multistander

Jenx Multistander is a pediatric standing system designed for use by children 6 months to 6 years with motor and neurological disabilities to assist with weight bearing and standing activities. The Jenx Multistander offers a variety of configurations for prone, upright or supine standing. The user may be positioned anywhere between upright and horizontal positions. This multifunctional stander can accommodate children smaller than the minimum height by using sandal-raising blocks. The removable

Jenx Supine Stander

Supine Stander is a robust standing support that offers children comfort and safety while standing. Children are supported at the back, leaving their hands free to access items on a tray or table in front of them.

Mulholland Rocket Stander

The Mulholland Rocket Stander is a prone/supine/upright stander for preschool children with neurological and physical disabilities weighing up to 50 lbs. The stander is designed to promote eye contact during peer interaction. It has a quick-folding frame for storage. With its standard features, the stander offers support for children with mild to more severe levels of physical disability. Adjustments can be made to the chest, hip, knee and foot supports to accommodate children of varying sizes a

Omni Stander

The Mulholland Omni Stander is a mobile standing aid designed to meet a variety of standing needs for children with mobility disabilities. The unit converts from a prone stander to a supine stander to a mobile prone stander. Adjustable postural supports accommodate growth and changing needs. The large, quick-release wheels include handrims for self-propulsion and the stander can be disassembled without tools for transport and storage.

Out / Stander (Models Os 1000 & Os 2000)

The Out/Stander is a prone, upright, and supine stander designed for use by children with lower extremity, neurological, or walking disabilities. The stander enables standing in all three positions, and offers a choice full-body anterior and posterior supports. The stander can also be positioned horizontally to facilitate transfers. Features include a central post with tilt mechanism with a ratchet handle and pin for secure angle adjustments; foot restraint and heel cups with lateral and front-t

Prone Stander (Model 130)

The 130 Prone Stander can also be used as a supine stander. It has an X-shaped chrome steel base and a flat torso support with adjustable laterals, pads, knee blocks and footplates. The stander also has adjustable velcro belts. An optional tray is available. DIMENSIONS: Base is 36 x 36 inches; stander is height adjustable from 20 to 40 inches, and angle adjustable from 85 to 180 degrees. Transport size is 12 x 36 x 36 inches. WEIGHT: 20 pounds without tray; 24 pounds with tray.

Rifton Supine Stander (Model E420)

The Rifton Supine Stander, Model E420, is a supine stander designed to provide supported standing for children and adults with mobility disabilities. Designed for users 30 to 50 inches tall, this padded wooden board includes a height-adjustable footboard, armrests, head blocks, and lateral support blocks that slide out of the way during transfers. The armrests can be positioned anywhere along the frame and the variable armrest tilt helps control upper body posture. The board is also equipped wit

Sammons Preston Tugs Pediatric Prone Stander (Model 4617A)

The Sammons Preston Tugs Pediatric Prone Stander, model 4617A, is a prone and supine stander designed for use by children with mobility disabilities. This stander is designed to keep children 25 to 48 inches tall in a prone position. Features include a fully vertical adjustable mainboard, knee board and footboard. Other features include a hand crank that provides quick and easy angle adjustments and nonslip, removable support pads that move to any position along the length of the board. Interna

Standing Frame

Tubular steel frame and plywood panels with wheels at rear and pegs with rubber crutch tips on front, allowing standing frame to be tipped back and wheeled from one place to another. Wooden footrest attaches to bottom of frame with molded plastic shoeholders. Wooden back board measures 28 inches high by 18 inches wide, with adjustment of height by reattaching board in alternative bolt holes. Adjustable height and depth foam knee support is clamped to vertical slot in back board. Foam- lined leat

Superstand & Superstand Youth

The Superstand and Superstand Youth are standing frames designed for use by children with neurological, lower extremity, balance, or mobility disabilities or spinal cord injury. This pediatric standing system supports children in prone, upright, or supine positions. The Superstand fits children from 26 to 48 inches tall and Superstand Youth fits children from 40 to 60 inches tall. Each unit comes with a headrest, chin rest, knee and foot support, and a rolling base with four 3-inch casters. The

Supine Stander

CUSTOM ADAPTATION PURPOSE: To provide standing ability for a child unable to stand unaided. Made of plywood, the unit is hinged at the bottom to enable the unit to be tilted as needed. A sliding metal rod at the back holds the frame in place. The stander is equipped with a tray that moves with the stander to keep it parallel to the ground. Semi-circular aluminum brackets under the tray pivot on the tray support bar for the necessary movement. The stander is also equipped with two pairs of padde

Supine Stander (Models Ss1 & Ss2)

The Supine Stander is a supine stander designed for use by children with lower extremity, neurological, or walking disabilities who need supported upright weight bearing and for whom prone standing is not appropriate. The basic stander includes two pairs of lateral supports (for the trunk and the hips), one 2-inch Velcro strap for either hip or trunk laterals, sectional back pads, posterior knee pads with padded strap, shoe holders, and locking casters. OPTIONS: Lateral knee supports; chest harn

Supine Standing Frame

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted standing frame for a child with migrating partial epilepsy in infancy (MPEI) to allow for therapeutic standing. The child had outgrown her Lazy Squirrel Frame that she used for home and at pre-school. The new adaptation allows the child to stand up and hold her own weight upright which is good for her muscles and enables her to engage more actively with others. The adjustable padded supports and straps on the frame support

Supro

Supro is a supine stander that has been designed for children from 2 years to young adult who need to develop and maintain their ability to weight bear through their lower extremities. It offers full posterior body contact and is suitable for users with little or no head control. The Supro provides the option of supine, prone and vertical standing in one frame. Its design gives an angle range of 90° allowing it to achieve a horizontal and vertical position. By removing the head support, re-fixin

Theradapt Mini-Supine Stander

The TherAdapt Mini-Supine Stander is a standing table designed and sized to meet the needs of children in early intervention programs. The hinged lower back lowers for positioning and adjusts in 5 degree increments back 20 degrees from vertical. The stander comes equipped with adjustable angle tray; adjustable trunk and knee pads; pelvic, knee and chest straps; dual adjustable thoracic pads; and ankle straps secured with double D-rings. The stander can be moved by tilting back and rolling it on

Theradapt Primary Supine Stander

The TherAdapt Primary Supine Stander is a standing table designed and sized to meet the needs of primary aged children. The hinged lower back lowers for positioning and adjusts in 5 degree increments back 20 degrees from vertical. The stander comes equipped with adjustable angle tray; adjustable trunk and knee pads; pelvic, knee and chest straps; dual adjustable thoracic pads; and ankle straps secured with double D-rings. The stander can be moved by tilting back and rolling it on non-swivel cast

Tiltables By R82

The Tiltables by R82 are powered and manual standers that convert to supine, prone, or upright standers and tilt tables designed for use by children and adults with mobility disabilities. All units include trunk support strap, individual height- and angle-adjustable foot supports, and locking casters. Each table provides 90- to 185-degree surface angle adjustment. The tables are available in three sizes, and sizes 2 and 3 are available with or without motorized power tilt; size 1 is available as

Tumble Forms Tristander 45 (Model 4525S) & Tristander 58 (Model 4530S)

The Tumble Forms TriStanders 45, model 4525S, and Tristander 58, model 4530S, are prone, supine, and vertical standers designed to provide versatile standing options for children. Both standers combine the stability of a tubular steel frame with the comfortable firm foam positioning modules by Tumble Forms. Foot-operated pneumatic tilt mechanisms adjusts the standing angle from 15 to 90 degrees, allowing the standers to be used in vertical, prone, and supine positions. The adjustable module cush

Parent Category: Other Standing Equipment
 
Processing...


Driving Walking/Biking Public Transit  Get Directions