Feeders

Results: 42

Assistive Dining Arm Sling

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Aids in the inability to hold oneself upright while eating. Seat belt webbing, heavy thread and Velcro tape make up this device. COMMENTS: The sling positions one's arm in a way that creates a more upright position--better suited for eating.

Assistive Dining Device

The Assistive Dining Device is a powered feeder designed to enable individuals with upper extremity disabilities to feed themselves without using their arms or hands. This powered feeder has rotating bowls, a mechanical spoon, and a positioning arm. The bowls containing the food rotate until the desired food is located under the spoon. The spoon then dips into the bowl, scoops up the food, and presents a rounded spoonful of food very near the lips of the user. The user must lean forward slightly

Beeson Automaddak Feeder (Model H74501)

The Beeson Automaddak Feeder, model H74501, is a powered feeder for persons with severe physical limitations due to cerebral palsy, spinal cord injury, or other disabilities involving movement, coordination, or range of motion. This electrically operated automatic feeder places a spoonful of food close to the mouth. Control pads are mounted near the top for use with a headstick, and may be relocated, if necessary. One control operates a spoon which takes food from a Pyrex glass plate and raises

Bestic

Bestic, an eating assistive device, is designed to support eating for individuals who have difficulty feeding themselves due to physical disabilities, decreased range of motion in their arms or hands, or decreased motor coordination due to neurological diseases or degenerative conditions such as Multiple Sclerosis, Polio, ALS, Parkinson’s Disease, Cerebral Palsy, spinal cord injuries, or ataxia. It is designed to allow the user to eat without assistance. Bestic can be controlled by anyone who is

Brief Or New: Feeding Device For Finger Foods.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Device promotes independent self-feeding by spinal cord injured persons. A cylinder is constructed of a rectangular piece of polyform splinting material measuring 13 by 4 cm. A polyform strip is attached to the side of the cylinder to hold the hand in place while eating. Feeding device was originally designed for a person with syringomyelia. Includes illustrations. SKILLS REQUIRED: Assembly. AUTHOR: Wiener, M M TITLE: Brief or New: Feeding Device for F

Bunk Bed Feeder Mount

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted feeder mount for a Kangaroo Pump feeder to a bunk bed for a child with Edwards Syndrome. There was no room for the feeder to be placed at the head of the bed; therefore, it was suggested that the child’s sleeping position be reversed. Despite the change in sleeping position the feeder could not be fixed directly onto the rails as they were too close together. A new bracket was added which holds the feeder just out from the

Case Report: The Development Of A Feeding Harness For An Als Patient.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Feeding harness which acts as a pulley, allowing a person with strong elbow extensors but weak flexors to bring a hand to the mouth for self-feeding. Harness made of a thermoplastic form for each shoulder, tubing across the back of the neck, wrist cuffs, and cotton or nylon cord threaded through the tubing to connect the cuffs and allow one arm to pull up the other for feeding. Developed for a patient with amyotrophic lateral sclerosis ( ALS). COMMENTS

Counterbalanced Swivel Fork.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Fork and tray ensemble designed to enable a person with minimal upper extremity function to eat independently. Describes a plywood tray, with suction cups on the bottom to prevent slipping, which holds a scoop dish attached with velcro and a cutout circle for a glass; a fork with an extension allows it to swivel. The fork is fastened to the dish with a chain of rubber bands which acts to keep the fork parallel to the plate when it is in the plate and h

Degree Feeding Bottles

Degree Feeding Bottles are designed for use with infants and children with swallowing and eating disabilities. This botle features an angled neck to permit nursing in an upright position, providing better control of swallowing.

Device To Enable An Individual To Feed Himself

CUSTOM ADAPTATION PURPOSE: To enable an individual with neurological disabilities to eat independently. This chair has an armrest for the user's right arm made from U-shaped PVC half-pipe.The armrest is attached to an outer sleeve that moves up and down a central steel post attached to the chair platform. A cast-iron window weight acts as a counter weight to render the user's arm weightless. A foot pedal connected to a system of pulleys and levers underneath the chair platform raises the user's

Drawstring Pouch

The Drawstring Pouch is a feeding tube holder designed to store the excess length of a feeding tube while the tube is in use by an infant, child or adult with swallowing or eating disabilities. Coiled tubing fits into this nylon mesh bag, and the bag can be pinned to clothing to help prevent accidental tube removal.

Eatery: Feeding Aid For Quadriplegics.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Feeding device manipulated with head motion and operated without electrical or mechanical power to allow self feeding by a person with limited hand function. Self feeding device made for a quadriplegic consisting of a sectioned tray with spoon shaped projections, attached to a table assembly which can be fitted to a wheelchair. The person pushes food into the spoon projections with a headstick and eats as if from a regular spoon. Requires some control

Eating Apparatus

The Eating Apparatus is a mechanical feeder designed to assist individuals with little arm strength or muscle control to feed themselves. This motorized feeding arm consists of a steel track, a forearm support for the right arm, and a 12-volt car window motor. The device is controlled by a remote switch which is operated by the left hand. The feeding aid attaches to a table-like surface with a C-clamp. PROTOTYPE DEVELOPMENT: This device was designed by John Duffus for an individual with very lit

Feeding And Toileting Devices For A Child With Arthrogriposis.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Feeding device to allow a person with no arm use to use a spoon or fork with head control. Simple device made with a small wood block 2 3/4 inches square and 1 1/ 4 inches high; a dowel 3 inches long and 1/2 inch in diameter; a nail with a flat head; a stationary-type clothespin; and a 4 or 5 ounce lead fishing sinker to provide weight. Provides instructions and photographs. The clothespin, which swivels on top of the dowel, holds the spoon or fork whi

Feeding Bottle With Flexible Tube (Model F74578-0000)

The Feeding Bottle with Flexible Tube, model F74578-0000, is designed for use by children and adults with swallowing and eating disabilities. It holds eight ounces of liquid and features a tube that extends from the bottom of the bottle out through a screw cap to control fluid intake. The bottle is also graduated in ounces and milliliters to aid in dispensing measured amounts of liquid. DIMENSIONS: The tube is 1/8-inch in diameter.

Feeding Tube Holder

DO-IT-YOURSELF-ENTRY --- PURPOSE: To enable an individual with ALS to indepemdemtly pour liquid meals into a feeding tube. The device consists of a quarter-inch plywood base with an upright length of plywood attached to it. The syringe barrel is attached to the side of the 2 x 4, enabling the user to use two hands to pour the liquid food. The unit disassembles for travel and storage. MATERIALS: one piece of quarter-inch plywood, a 9-inch length of 2 x 4, and fasteners. TOOLS: Wood shop tools. S

Gooseneck Feeding Device.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Gooseneck holder for spoon to provide resistance against uncontrollable arm movements. A gooseneck with an angle clamp can be purchased. A lock-on accessory with a push button release is attached to the end of the gooseneck and silver brazed to the eating utensil to be used. In the example described a T bar handle was also brazed onto the end of the utensil to provide better support for a person with uncontrolable movement. A commercially available laz

Icraft

---- PROTOTYPE --------- PURPOSE: To create a prototype of an eye-controlled robotic arm feeding system for individuals with mobility disabilities and/or paralysis. iCRAFT (eye Controlled Robotic Arm Feeding Technology) was developed by students at Northeastern University. iCRAFT allows the user to move its robotic arm by moving his or her eyes. With the iCRAFT system, there is absolutely no physical connection between the device and the user. All the user needs to do is look at one of four larg

Independent Feeder

CUSTOM ADAPTATION PURPOSE: To enable an individual with Guillain Barre Syndrome to eat independently. TITLE: Eating Independently. Made primarily of stainless stee, this unit has a rectangular base frame that fits into an existing tube on the user's wheelchair and supports a standard wooden dinner tray. On the right side of the frame is a vertical post with two 90-degree bends in it that is fixed in position with a trinut, creating a mount for the feeding device and a drink container. The mount

Jofas Clamp

The Jofas Clamp is a feeding tube holder designed for use in nasal gastric and gastric feeding of infants, children or adults with swallowing or eating disabilities. The unit holds a standard 60cc syringe for gravity feeding. It consists of a flexible arm that is light weight and portable, with a C-clamp base that attaches to flat surfaces (such as tables or counters) up to 2 inches wide. DIMENSIONS: Flexible arm is 24 inches long.

Long Handled Holder (Sandwich Or Washcloth).

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Long handled washcloth, sandwich or other item holder for persons unable to raise hands to face due to stiffness or weakness. Describes a holder made of aluminum with plastic end pieces and a steel spring to provide grip. Lists materials needed. Provides diagrams and photographs. SKILLS REQUIRED: Metalworking. TITLE: Self-Help Devices for Rehabilitation REF: Dubuque, Iowa: Wm C Brown: p 64-66 NARIC CALL NUMBER: R3360 PAGES (including cover): 4 1958.

My Spoon

My Spoon is a powered feeder designed for use by individuals with eating disabilities, spinal cord injury, upper extremity disabilities, or upper extremity amputation. This device allows users to eat most types of everyday food with minimal help from a caregiver. The user sits upright to be fed. A base unit sits on the table next to a dish with four comparments, and an arm raises food to the user's mouth. The device can operate in manual, semi-automatic, or automatic modes, with a joystick, butt

Neater Eater Electric Version

The Neater Eater Electric Version is a powered feeder designed for use by individuals with severe physical disabilities which make self feeding difficult. The feeding arm can be programmed so the spoon scoops food from the plate and brings it to the user's mouth. The device can be set up for five different diners and the automatic cycle of the spoon can be controlled in four different ways: A single eating cycle has the spoon run once; a Go While Pressed cycle has the spoon move only when the s

Neater Eater Manual Version & Adapted Version

The Neater Eater Manual Version is a mechaincal feeder designed for use by individuals with severe physical disabilities which make self feeding difficult. The unit features adjustable springs that help the user to smoothly guide the spoon down into the plate and up to the mouth. Adjustable stops prevent the spoon from moving past the plate or too close to the user, and stop the spoon at the right height for the user's mouth. The plate is turned by the user. In the Adapted Version, an adjustabl

Oral Motor Therapy Feeder

The Oral Motor Therapy Feeder enables solid foods to no longer be a choking hazard for children or those with difficulty chewing or swallowing. Drop the mesh bag into a retainer ring, place the food in the bag, and screw tight. The mesh bag lets children practice their chewing skills without the risk of choking. The feeder is an ideal tool for those wanting to introduce new flavors and textures to the sensory defensive child who would normally just spit them out.

Plastic Food Holder.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Plexiglass holder assists those unable to eat food such as sandwiches and toast normally held in the hands. Holder is constructed of 3 pieces of plastic. Handle is a strip 1 inch wide by 1/8 inch thick by desired length. Main holder is made from two half circles (one slightly larger) of plastic. The larger is riveted to the handle, the other is attached using a rubber band inserted through 1/8 inch holes. An attachment for foods such as hard boiled egg

Portable Table

---- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself portable table for use with an individual with Duchenne’s muscular dystrophy who can no longer lift his arms to feed himself. A small table which folds flat was made from a 1/8 inch masonite. Three panels are all of the same width with one slightly longer than the other two. This creates a top for the table with the two other panels being used to fold out as “leg panels”. Small hinges and screws were obtained from a local

Ramp To Tilt Wheelchair To Comfortable Eating Position

CUSTOM ADAPTATION PURPOSE: To enable an individual with cerebral palsy who uses a wheelchair with tilt-in-space seating to eat independently. The user's disability prevents upright sitting, so a low-level ramp was constructed to raise the wheelchair's rear wheels. Seventeen millimeter lightweight plywood was used to construct the sloping portion of the ramp, and five slats of 50 x 25 millimeter wood were used to fashion a gutter to hold the rear wheels in place. The same type of wood was used t

Reflux Sling

Therapeutic infant sling for gastro-esophageal reflux. Requires inclined mattress to 30 degrees. Quilted fabric. Ties to crib bars. Washable. Preemie, term or infant size. Blue or pink.

Reflux Wedge

The Reflux Wedge is a therapeutic aid body positioner designed for infants with gastro-esophageal reflux. It holds infant prone at a 30 degree angle. Features include non-absorbent Staph-Chek covered fire retardant foam and zip closure covers. Quilted covers zips off easily for washing. SIZES: Bassinet, extra small, small, medium, large, or extra large. CAPACITY: Fits preemies and infants up to 30 pound. COLOR: Blue or pink.

Saebomas

The SaeboMAS (Mobile Arm Support) is an arm exerciser designed for use by individuals with neurological or orthopedic conditions that exhibit proximal weakness of the upper extremity. This zero gravity arm exerciser facilitates and challenges the weakened shoulder and elbow during functional tasks and exercise drills, with the goal of maximizing function while increasing proximal strength. It allows the user to perform exercises with minimal compensation, and it supports self-care tasks such as

Sandwich Feeder.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Sandwich holder to enable a person with no hand use to eat independently. Thermoplastic sandwich holder, developed for a person with quadriplegic cerebral palsy, which allows the person to take a row of bites then slide the sandwich forward with the chin to continue. Includes photograph. COMMENTS: For further information contact Dr Roy Norris, Rehabilitation Engineering Center, 2021 North Old Manor, Wichita, Kansas 67208. REC funded by NIHR grant G0080

Sandwich Holder (Model 1394)

The Quad Quip Sandwich Holder, model 1394, is a sandwich holder designed for use by individuals with limited hand use. The plastic holder grips the sandwich and rubber band provides the clamping action. The unit can be inserted into a utensil holder (not included). The holder is latex free and dishwasher safe.

Spoon Plate: A Self-Feeding Device.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Plate with a spoon-deep depression around the edge, which, when mounted at mouth level allows a person with little or no arm function to feed independently. Describes a plate made of Kydex, about 10 inches in diameter, with a spoon-deep groove around its edge from which a person can take food. The plate is divided into four sections, and can be rotated to allow choice of foods. Provides instructions for fabrication, and criteria for use including oral

Stroller With Drip Feeder Attached

CUSTOM ADAPTATIONPURPOSE: To enable a child with mobility and eating disabilities to be taken out of the house for longer periods of time. A drip feeder (consisting of a bag with liquid nutrients, a battery-powered electric pump, and flexible plastic tubing between the bag, pump and child) is mounted on a child's stroller. The pump is mounted on a wood post attached to the center of a metal base bolted to across the back of the stroller frame. The diameter of the post is identical to that of the

Sucup Care Feeding Aid

The Sucup Care Feeding Aid is a drinking aid designed for use by individuals who are experiencing difficulty in feeding by traditional methods as a result of stroke, cancer or surgery. Its purpose is to restore dignity by allowing the user, of any age or ability to consume food cleanly, easily, and independently. The user is able to consume the lightly blended food by sucking on the large diameter straw, by gentle pressure on the mouthpiece or a combination of both of these methods. Sucup is spi

Thirty Degree Prone Positioning Board For Children With Gastroesophageal Reflux.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Prone positioner for infants, intended to hold the child at 30 degrees after feeding to prevent gastroesophageal reflux. Describes construction of a prone positioner using 24 by 36 inches of Orthoplast bent around and fastened at the corners, creating a 30 degree angle (to allow for the child's weight and compression), with the opening filled with dense foam. An 8 by 20 inch piece of Orthoplast is molded into a cone shape and fastened near the bottom e

Thomas Steady Arm

The Thomas Steady Arm is an arm support for feeding and a writing aid designed for use by children or adults with disabilities causing arm and hand tremors. This unit eliminates and/or significantly controls tremors by supporting graduated vertical, horizontal, and circular movements. The unit mounts to any table top (other than glass) or to a wheelchair. The user's arm is placed in a trough-style arm holder and secured with straps, and the unit's three tension adjusters are set to counter tremo

Tucker Sling

The Tucker Sling is an infant positioning system for babies who need to be elevated while they sleep. The top of the sling fits snugly over one end of the crib like a fitted sheet or pillow case. The bottom portion of the sling fits the baby much like a safety harness or parachute rigging that goes between the baby's legs and wraps securely around the torso. The baby can be placed on his/her back, side or stomach (in supine, lateral, or prone position). Raising one end of the mattress to approxi

Tumble Forms Feeder Seat (Series Pc 2795)

The Tumble Forms Feeder Seat is designed to provide secure trunk positioning and posturally correct seating for infants or children with physical disabilities while feeding, learning, or resting. The seats feature a contoured interior with a 90-degree seat-to-back orientation, a 45-degree hip strap, and a quick-release H-belt shoulder harness with slots allowing 4 inches of vertical adjustment. The seats may be used in a chair or stroller, on the floor, or on a parent's lap. The Tumble Forms' se

Winsford Feeder

The Winsford Feeder is a height-adjustable powered feeder designed to enable individuals with quadriplegia or other upper extremity disabilities to independently feed themselves soup or any solid food that can be cut into small enough pieces . The height adjustment is accomplished using the large knob on the device. The unit includes a carrying case, a Corelle dinner-sized plate, a soup/cereal bowl, pusher, chin switch, glass holder, turntable, shelf, plug-in rocker switch, and drip pan. To eat

Winsford Feeder With Case (Model 124601)

The Windsford Feeder With Case, model 124601, is powered feeder designed to enable people with upper extremity disabilities to feed themselves at their own speed. A slight head motion on the chin switch activates the motorized pusher that fills the spoon, which automatically moves to the mouth. Controlled rotation of the plate selects food for each mouthful. A bowl may be substituted for the plate by removing the plate and pusher and adding the turntable, shelf, and drip pan. A separate knob adj

 
Processing...


Driving Walking/Biking Public Transit  Get Directions