Traction System

Results: 18

Adapta Traction Tables (Models Aet-4 & Aft-4)

The Adapta Traction Tables are powered heiight-adjustable traction systems, model AET-4, or fixed height traction systems, model AFT-4. Each table has foursections. The head section adjusts up or down 25 degrees and includes a breathing slot cut-out. The large pelvic and lumbar section elevates 50 degrees. The center section is removable, and the thoracic section is stationary. Each model features vinyl upholstery with foam padding. OPTIONS: Casters, examination table paper holder, and a foot co


The Carpal-Trac is a traction system designed to alleviate pressure on the soft tissue structures of the wrist. The interlocking wrist strap allows therapeutic traction without compressing the carpal tunnel area. This system can be used with most clinical traction units and a choice of one clevis is included.

Chattanooga Clinical Cervical Traction Device

The Chattanooga Clinical Cervical Traction Device is a traction system designed for clinical use. This unit pulls at the base of the occiput for more effective cervical traction. This device can be used with Chattanooga systems and most other traction devices and performs horizontal traction. The unit includes a choice of one clevis. SIZES: One size fits most.

Dr. Ho's Neck Pain Relief Kit

The Dr. Ho's Neck Pain Relief Kit is a comprehensive neck care combo package designed to provide therapeutic support, traction, spinal alignment and overall relaxation to the cervical vertebrae of the neck for individuals with neck pain, headaches, muscle strain, poor circulation, and migraines. It consists of the Dr. Ho's Neck Comforter Cervical Traction Device and the Dr. Ho's HoPhysio Neck Utopia Massager.

Flexion Stool (Model Txs-1)

The Flexion Stool, model TXS-1, is a traction system designed for clinical use. This adjustgable-height stool has a wide base with a rectangular padded top and enables the user to be placed with the lumbar spine in the neutral or flexed position. OPTIONS: RhinoHyde upholstery. DIMENSIONS: The height adjusts from 13 to 20 inches. COLORS: The standard upholstery is available in eight standard and six designer colors. The optional RhinoHyde upholstery comes in five colors.

Inversion Stretch Station (Model 30107)

The Inversion Stretch Station, model 30107, is a gravity traction system designed for use by individuals with back pain. The user steps onto the steel framed, nylon backed stretcher in an upright position. While secured at the ankles by foam padded ankle collars, the user grips the support handlebars and rotates the stretcher to an inverted, downward position in line with the force of gravity. In this position, the user's spine is elongated helping to increase space between the vertebrae and rel

Lumbo 90 Degrees

Portable traction system. Includes vinyl covered wedge to be placed under head and bolster for under legs putting patient in a 90/90 traction position while also rotating and flexing the pelvis. User wears a single pull pelvic belt which hooks to a rope and pulley. The pulley clamps and locks rope in place. Conducive to relieving low back pain. Frame only, $293.00; leg bolster, $128.00; $88.00, head wedge; single pull pelvic belt, $32.00 regular, $37.00 extra large.

Morgan Lumbar Traction Exercise Harness (Hmhmr)

The Morgan Lumbar Traction Exercise Harness is a traction system designed to provide traditional mechanical, heavy manual, or pulley traction, body weight suspension traction, or unloading (unweighted) exercise for individuals with low back disabilities or injuries. This harness handles single- or double-pull lumbar traction in forces up to 300 pounds in prone, supine, or vertical positions. When used as a thoracic harness, it contours around the rib cage to minimize pressure to the chest area.

Positex Extremity Mobilization Set (Model 605)

The Positex Extremity Mobilization Set, model 605, is a traction system designed for use in therapeutic settings. This set includes the Positex Extremity Mobilization Strap, the Positex Patient Stabilizer Strap, and the Positex Joint Distraction Cuff (see separate entries).

Positex Joint Distraction Cuff (Model 603)

The Positex Joint Distraction Cuff, model 603, is a traction system designed for use in therapeutic settings. This cuff is used to apply traction forces to the knee joint during mobilization procedures. The cuff is constructed of padded vinyl with adjustable Velcro closure and a foot stirrup.

Positex Patient Stabilizer Strap (Model 604)

The Positex Patient Stabilizer Strap, model 604, is a traction system designed for use in therapeutic settings. This strap attaches to the edge of a treatment table with an attatched "J" to secure the individual during mobilization procedures. The banana-shaped pad consists of a heavy, flat bar padded with foam and covered in vinyl. A strong woven-nylon strap adjusts for length with one hand and includes a push-button release buckle. DIMENSIONS: Eight feet long.

Saunders Lumbar Traction Device

The Saunders Hometrac Lumbar Traction Device is a portable traction system designed for home use. The unit applies up to 200 pounds of traction and force is applied via a hand-held pump, actively separating the lower section of the treatment surface from the upper section. The friction-free track creates efficient traction, transmitting less pressure through the pelvic belts and concentrating the force where it is most needed. The unit folds for transport and storage and is equipped with a carry


Spine-Worx is a traction system designed for use by individuals with back pain. The user lies on the unit with his/her head on a pillow, enabling the unit to realign vertabrae and relax muscles. Padded ridges apply pressure where needed and sustains it over several minutes. The device allows the back to conform to its normal, natural shape, and the user's body weight controls applied pressure to the mid and lower back. WEIGHT: 2 pounds.

Traction Accessory Package (Model Txa-1)

The Traction Accessory Package, model TXA-1, is a traction system designed for clinical use. This set can be used for pelvic or lumbar traction applications up to 200 pounds. The set includes one adjustable cervical traction halter, one heavy duty pelvic traction set, two TX pillows and covers, and a spreader bar.

True Back (Model 30165 )

The True Back, model 30165, is an orthopedic traction system designed for use by individuals with back pain. This traction system helps to relieve pain associated with muscle cramps, sciatica, headaches, tension, or spasms. The system consists of thiry suspension points evenly distributed throughout the length of a curved plastic frame. These suspension points support the body's weight and apply pressure to the muscles. The spine floats in the center channel as the back is passively stretched. A

Tx-1 & Tx-2 Traction Units

The TX-1 Traction Unit is a mobile traction system and the TX-2 Traction Unit is a stationary traction system featuring an electronic, digital control console. These units offer selection of zero to two hundred pounds of traction and four modes of treatment: progressive intermittent, intermittent, static or progressive static. A progressive step selector allows prescribed traction pull to be obtained in 9 progressive steps. The treatment timer runs from 1 to 99 minutes. Remaining time is displa

Tx-7 & Tx-8 Traction Units

The TX-7 Traction Unit is a mobile traction system and the TX-8 is a stationary traction system featuring dial controls. Traction from zero to two hundred pounds may be selected as can two modes of treatment,: intermittent or static. The treatment mode is chosen using the selector switch. A red indicator light is illuminated when the selected traction weight is reached. A treatment timer for one to sixty minutes, a traction timer for zero to sixty seconds, and a rest cycle time of zero to sixty

Txc-1 Traction Chair

The TXC-1 Traction Chair is a traction system featuring five positions. The chair reclines to angles of 0, 15, 25, 35, and 45 degrees and features vinyl upholstery and foam padding. Armrests, a foot platform, and four caster wheels are standard. DIMENSIONS: 20.5 inches wide x 35 inches high when erect and 45 inches long when at the 45-degree reclined position. WEIGHT: 70 pounds.

Parent Category: Traction

Driving Walking/Biking Public Transit  Get Directions