Grab Bar for Bathtub

Results: 63

Adjustable Grip Assist (Model 71406)

The Adjustable Grip Assist, model 71406, is a grab bar designed for use to provide balance assistance in the shower or bathtub. This grip has two pivoting handles that swivel to allow positioning for different needs. The grip can be installed and removed by flipping tabs. DIMENSIONS: Handles are 15 inches long.

Adjustable Height Clamp On Tub Rail (Model 70889)

The Adjustable Height Clamp On Tub Rail is a grab bar designed for use in bathtubs. The grab bar is made of powder-coated steel, and is adjustable in both height and width. It has a stainless steel locking mechanism for attaching to the side of a tub, with rubber pads that grip the tub without scratching. DIMENSIONS (HxW): 14 to 17 x 3 to 7 inches. COLOR: White. WARRANTY: Warranted.

Assist Suction Tub Bar

The Assist Suction Tub Bar is a bathtub grab bar designed for use by individuals with balance or lower extremity disabilities. This grab bar attaches to the bathtub edge or shower wall with two suction cups, which are locked in place by lowering a switch located on the grab bar. Flipping the switch up releases the cups so the grab bar can be removed or repositioned. The grab bar is made of ABS plastic and rubber. DIMENSIONS: 11 inches long with suction cups 3.75 inches in diameter or 16 inches l

Assistive Tub Bar

The Assistive Tub Bar is a bathtub or shower grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. To install, the bar is positioned vertically, horizontally, or diagonally on the tub or shower wall, then tabs on the bar are flipped down to engage dual suction cups. Releasing the flip-tabs allows the bar to be removed. The bar is made from ABS plastic and rubber. DIMENSIONS (LxW): 16 x 3.5 inches. CAPACITY: 300 pounds.

Bath+Safe Deluxe Tub Safety Rail (Model F72716-4000)

The Bath+Safe Deluxe Tub Safety Rail, model F727216-4000, is a clamp-on grab bar for bath tub designed for use by individuals with balance or mobility disabilities. This rail features a large base with an easy-to-grasp non-metal A-shaped handle. The base clamps over the edge of the tub and tightens with a large T-shaped knob. Rubber pads inside the base protect the tub from scratches. DIMENSIONS: The rail is 14.75 inches high and fits tubs 3 to 7 inches thick.

Bathtub Grab Bar

The Bathtub Grab Bar is a grab bar for bathtub designed for use by individuals with balance and mobility disabilities. This U-shaped bar features a wide clamp base that fits over the edge of the tub. A screw clamp adjusts the width for a secure fit. DIMENSIONS: The unit fits tub walls 3 to 7 inches thick. The bar is 19.5 inches tall and extends 14.75 inches above the tub. The width adjusts from 8 to 11.5 inches.

Bathtub Rail With Chrome Finish

The Bathtub Rail with Chrome Finish is a grab bar for the bathtub designed for use by individuals with mobility disabilities. The rail provides the individual with support while moving into or out of the bathtub. The rail clamps to the tub with adjustable spring steel clamps lined with rubber pads to protect the tub. DIMENSIONS (HxDxW): 7 x 0.75 x 11 inches. The clamp adjusts from 3.5 to 6 inches in unlimited increments. COLOR: Chrome finish.

Bathtub Safety Rails (Models 1240, 1250, 1255, 1260, & 1265)

Bathtub Safety Rails are bathtub grab bars designed for use by individuals with balance or mobility disabilities. Made from powder-coated steel (models 1250 and 1255), plastic (models 1260 and 1265), or a composite material (model 1240), these rails provide added stability when getting in and out of the bathtub. Models 1240, 1250, 1255, and 1260 have two grip handles, including a lower one that allows for a seated grip position. Model 1265 has one grip handle. The rails attach to the tub sides w

Bathtub Safety Rails (Models H100, H200, H250 & H300)

The Bathtub Safety Rails are grab bars for bathtubs designed to provide stability for individuals with physical or neurological disabilities while bathing or transferring. Model H100 is made of steel with a white polyester coating. Models H200, H250 and H300 are made of chrome-plated steel. The mounts are coated with soft plastic brushing. DIMENSIONS: Model H100 - 5.74 x 14.75 inches; Model H200 - 11.75 x 11 inches; Model H250 - 16 x 14.75 inches; Model 300 - 18 x 6 inches. WEIGHT: Model H100 -

Bi-Level Tub Grab Bar

The Bi-Level Tub Grab Bar is a grab bar for the bathtub designed for use by individuals with balance or mobility disabilities. Ergonomically designed to encourage a proper grasp while entering or exiting the tub, this heavy-gauge welded steel bi-level bar clamps to the tub using a stainless steel locking mechanism and rubber pads. The unit can be installed without tools for temporary or permanent use. DIMENSIONS: The bar extends 14.75 inches above the tub and adjusts to fit tubs from 3 to 7 inch

Bridge Medical Pivot Grip Telescoping Portable Grab Bar (Models Bc400M & Bc400L)

The Bridge Medical Pivot Grip Telescoping Portable Grab Bar is a wall grab bar designed for use by individuals with balance or mobility disabilities. Because the bar telescopes and the ends pivot and rotate, this bar offers a variety of installation options, including stretching across a corner, stretching across the inside of a bathtub, or stretching across unparallel surfaces. The bar pivots 180 degrees. The bar attaches with large suction cups which lock and release with levers. SIZES: Model

Bridge Medical Telescoping Portable Grab Bar (Model Bc400M)

The Telescoping Grip Portable Grab Bar is a portable bathtub or shower grab bar designed for use by individuals with balance or mobility disabilities. The telescoping grip allows the portable grab bar to lengthen and shorten based on the specific need of the user. It is constructed with rubber suction pads capable of holding over 200 pounds of pull force strength for a reliable hold. The telescoping grip is available in two sizes to accommodate most needs and no tools are required for installati

Bridge-Medical Single Grip Portable Grab Bar (Model Bc-201)

The Bridge-Medical Single Grip Portable Grab Bar, model BC-201, is a bathtub or shower grab bar designed for use by individuals with balance or mobility disabilities. This portable grab bar has suction cups for attaching to a tub, shower, or other smooth, non-porous surfaces. The suction cups provide over 200 pounds of pull strength and will not damage surfaces. DIMENSIONS: 13 inches long. The suction cups are 4.5 inches in diameter. WEIGHT: 3 pounds.

Carex Ultra Grip Pivot Suction Grab Bar

The Carex Ultra Grip Pivot Suction Grab Bar is designed to assist individuals in the tub, shower, and bathroom to prevent slips and falls, and offer support. These grab bars are available in straight lengths and 22 different custom designs. The unique pivoting center design allows for installation in whatever position it is needed and the handy visual indicators on the suction cups ensure you're grabbing onto a solid handle. Handy and easy to use, this suction cup grab bar delivers ideal balance

Combination Aid Rail (Model 1632)

The Combination Aid Rail ##1632 is a stainless steel wall mounted grab bar for use in bathtubs or showers. The support consists of an L-shaped bar that mounts in two places on the vertical side, and one on the horizontal side. The grab bar is available in exposed mounting styles and 4 concealed mounting styles. The rail comes in right or left hand configurations. DIMENSIONS: 16 x 32 inches with 1, 1.25, or 1.5 inch diameter tubing. Safety wall clearance is 1.5 inches. FINISH: Brushed Satin is st

Corner Mounted Tub Rail (Model 3236-C)

The Corner Mounted Tub Rail ##3236-C is a stainless steel wall to floor grab bar for bathtubs. The support consists of an L-shaped horizontal hand bar that attaches to the side and back walls of the tub, and a vertical bar that attaches to the underside of the hand bar and mounts in the floor on the outside of the tub. This grab bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS (WxDxH): 36, 40, 42, or 48 inch crosspieces x 12 x 32

Dependa-Bar

The Dependa-Bar is a wall-mounted grab bar designed for use by individuals with balance, walking, or mobility disabilities. Designed for use in the tub or shower or beside the toilet, this bar consists of a vertical wall-mounted grab bar with a horizontal fixed bar at the bottom, and a moveable P-shaped bar in the center. The moving bar locks every 45 degrees (5 positions), providing a support rail that moves with the user. This stainless steel unit mounts securely to structural studs behind bat

Dual Level Bathtub Rail

The Dual Level Bathtub Rail is a grab bar for the bathtub designed for use by for individuals with mobility disabilities. The rail provides the individual with a high/low grip support, including a straight crossbar, for support while moving into or out of the bathtub. Each gripping area has a textured finish. The rail clamps to the side of the tub with adjustable spring steel clamps lined with rubber pads to protect the tub. DIMENSIONS (HxDxW): 16 x 1 x 12 inches. The clamp adjusts from 3.5 to

Economy Tub Rail

The Economy Tub Rail is a grab bar for bathtub designed for use by individuals with balance or mobility disabilities. The bar is made of chrome-plated steel with rubber pads on all tub contact points. Knurling around grab bar diameter provides a permanent no-slip grip. DIMENSIONS: 8 x 11 or 7 x 17 inches. WARRANTY: Limited lifetime warranty.

Ergobar

The Ergobar is a bathtub grab bar designed for use by individuals with balance or mobility disabilities. This all-acrylic grab bar is made of 100 percent industrial-grade acrylic and it comes in a variety of standard or custom shapes and sizes. COLORS: Available in the same shades as the acrylic sheets used by bathtub manufacturers, or in custom colors.

Essential Bath Safety Plus Bathtub Safety Bar (Model B3200)

The Essential Bath Safety Plus Bathtub Safety Bar, model B3200, is a grab bar for bathtub designed for use by individuals with arthritis or balance or lower extremity disabilities. Made of enamel-coated steel, this rounded A-shaped bar offers two levels of support. A rubber-padded clamp adjusts to secure the bar to tub walls. DIMENSIONS: The steel bar is one-inch in diameter and the clamp fits tub walls 3 to 7 inches wide.

Floor Mounted Tub Rail (Model 3236)

The Floor Mounted Tub Rail ##3236 is a stainless steel wall to floor grab bar for the bathtub. The support consists of a U-shaped hand bar that mounts at two points to the wall, and two vertical bars attached to the underside of the hand bar that extend to and mount in the floor on either side of the tub. Due to this construction, this model may be especially suited for island tubs. This grab bar is available in 4 concealed or 4 exposed mounting styles. DIMENSIONS (WxDxH): 36,40, 42, or 48 inch

Hampshire Contoured Tap Rail (Model 09-107-8534)

The Hampshire Contoured Tap Rail, model 09-107-8534, is a bathtub grab bar designed for use by individuals who need support rising from or sitting down in a bathtub. The plastic rail is fixed to taps by means of a clamping bar. Its contoured plastic moldings enhance the user's grip on the rail when raising and lowering. In use, the rail rests on the edges of the tub; the unit may be folded up against the wall when not in use. DIMENSIONS: Max diameter of taps 80mm (31/8"). Distance of bar from ta

Handi-Grip Portable Grab Bars

Handi-Grip Portable Grab Bars are wall grab bars designed for use by individuals with balance or mobility disabilities. These telescoping bars attach to most smooth surfaces such as marble, glass, or tile, with strong suction cups at each end. Flip switches at each end anchor or release the bar. Most models are available with or without a safety indicator: When the rocker is flat to the lever, the suction is adequate for the load, when the warning rocker rises and the red edge shows, release and

Heavy Duty Bathtub Safety Rail (Model 69603A)

The Heavy Duty Bathtub Rail, model 69603A, is a grab bar for bathtub designed for use by individuals with balance, lower extremity or mobility disability disabilities. Made of heavy-gauge, powder-coated steel, the grab bar provides two gripping surfaces to facilitate both entry and exit from tub. It attaches to a tub with extra-large suction cups. DIMENSIONS: Fits tubs with walls 3 to 7.25 inches thick. CAPACITY: 300 pounds. COLOR: White. WARRANTY: Lifetime limited warranty.

Heavy-Duty Safety Tub Bar (Model 1609)

The Heavy-Duty Safety Tub Bar, model 1609, is a grab bar for bathtub designed to assist those who need extra support when using the tub. The bar is chrome-plated and has vinyl sleeves to prevent marring. A unique Lok-Fit design assures support. DIMENSIONS: 18 x 17 inches, bracket adjusts 4 to 7 1/2 inch width.

Heavy-Duty Safety Tub Bar (Models 1605, 1606, & 1607)

Heavy-Duty Safety Tub Bar, models 1605, 1606, 1607, is a grab bars for bathtub designed to make for safer entry and exit from the bathtub. The chrome-plated bars have vinyl sleeves to prevent marring and a unique Lok-Fit design to assure patient support. DIMENSIONS: 6 x 17 inches. 3 type of brackets available: for 3 to 4 1/2 inch width, for 4 to 7 1/2 inch width, for old style roll rim tubs.

Horizontal Tub Bar With Vertical Arm (Model 2040-V/vm)

The Horizontal Tub Bar with Vertical Arm is a stainless steel wall mounted grab bar for bathtubs. The support consists of a horizontal bar with an L- shape to fit to the corner of the side and back walls of the tub, and a vertical bar for additional hold when entering or leaving the bathing area. The bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS: 40 x 20 x 32 inches (##2040- V) or 24 x 48 x 32 (##2040-VM with center mounting) w

Idea Works Super Grip Suction Mount Handle

The Idea Works Super Grip Suction Mount Handle is a grab bar for bathtub designed for use by individuals with mobility or balance disabilities. Designed to assist in getting in and out of a bathtub, this device features two suction cups that secures the handle on the side of the tub or shower wall. Once the lever is released, the unit can be removed and made portable for travel. There are no tools required for mounting. CAPACITY: 156 pounds

Invacare Molded Tub Bar (Model 710-4)

The Invacare Molded Tub Bar, model 710-4, is a grab bar for bathtub designed for use by individuals with balance or mobility disabilities or arthritis. Made of molded plastic, this unit attaches to the wall of the bathtub to provide two gripping surfaces. The upper gripping surface helps the user to enter the tub, and the lower gripping surface assists the user in lowering into or rising from a seated position in the tub. The unit has an adjustable locking mechanism for attaching to the wall of

Long Tub Assist Bar

The Long Tub Assist Bar is a grab bar for the bathtub designed for use by individuals with balance or mobility disabilities. Made of heavy-duty plastic, this bar adheres to the tub or wall using the large suction cup at each end. The bar can be used horizontally or vertically. Flip tabs release the bar for repositioning. DIMENSIONS: 16.5 inches long. The suction cups are 4 inches in diameter. COLOR: White with green tabs.

Moen Securelock Tub Grip (Model Dn7175)

The Moen SecureLock Tub Grip, model DN7175, is a grab bar for bathtub designed for use by individuals with balance, lower extremity, or mobility disabilities. This portable unit fits over most tubs and locks with the Securelock mechanism. The tub walls are protected by non-skid pads. The circular handle/grab area is textured for a secure grip. DIMENSIONS: The unit fits tub walls 2.75 to 5.5 inches thick. The grip height is 12 inches. CAPACITY: 350 pounds. WEIGHT: 6 pounds. WARRANTY: Limited life

Multi-Level Hand Grip (Model F72481)

The Multi-Level Hand Grip, model F72481, is a wall grab bar designed to provide support for persons in bathing situations or for getting up or sitting down on the toilet. The grip can be mounted at any level and forms a curved L which protrudes from the wall. The unit is made of molded unbreakable polypropylene with grooved inner surfaces for a non-slip grasp. Three models of the grip are available: a single level (H72481-0001) which attaches to the wall at both ends; a double level (model H7248

Off-The-Pot

Off-the-Pot is a floor- or wall-mounted grab bar designed to assist with bathroom mobility for individuals with balance, neurological, lower extremity, or mobility disabilities or arthritis or spinal cord injury. The unit can assist with transfers to and from a wheelchair or walker, seated balance, and balance upon standing. This device can be positioned on the right- or left- hand side of the toilet, beside the bathtub, or between the tub and toilet, and mounts to the floor or wall. Features in

Plastic Tub Grab Bar With Handle (Model 8222)

The Plastic Tub Grab Bar with Handle, model 8222, is a bathtub grab bar designed for use by individuals with balance or mobility disabilities. This tub grab bar has a blow-molded handle and an anti-skid clamp. DIMENSIONS: The clamp adjusts to fit bathtub sides from 3.5 to 6.5 inches. COLOR: Red handle with white clamps.

Quality Tub Rail

The Quality Tub Rail is a grab bar for bathtubs designed for use by individuals with balance or mobility disabilities, spinal cord injury, or arthritis. This grab bar provides a safe grip when getting in and out of the tub. DIMENSIONS: 12 or 16.5 inches high. The rail will fit tub walls from 2.75 to 6.5 inches wide.

Safety First High Profile Tub Bar (Model Sf580)

The Safety First High Profile Tub Bar, model SF580, is a bathtub grab bar designed for use by individuals with balance or mobility disabilities. The bars are made of tubing with a grooved surface to aid in gripping, and come with adjustable mounting clamps with neoprene pads to protect tub walls. The bar is higher for use by taller individuals. DIMENSIONS (HxW): 15 x 7.25 inchess, with 1 inch diameter tubing. Mounting clamps fit tub walls 3.75 to 5.75 inches wide. COLOR: White.

Safety First Low Profile Tub Bar (Model Sf590)

The Safety First Low Profile Tub Bar, model SF590, is a bathtub grab bar designed for use by individuals with balance or mobility disabilities. Bars have a grooved surface for secure gripping. Adjustable mounting clamps have neoprene pads to protect tub walls. DIMENSIONS (HxW): 6 x 17.25 inches with 1 inch diameter tubing. Mounting clamps fit tub walls 3.75 to 5.75 inches wide. COLOR: White.

Safety First Multi-Grip Tub Bar (Model Sf585)

The Safety First Multi-Grip Tub Bar, model SF585, is a bathtub grab bar designed for use by individuals with balance or mobility disabilities. This portable grab bar has a higher horizontal bar on one side and a lower horizontal bar on the other side, providing two levels to hold onto when getting in and out of the tub. Bars are made of plastic tubing with a grooved surface for gripping, and come with adjustable mounting clamps with neoprene pads to protect tub walls. DIMENSIONS: Two 8-inch long

Safety In The Bathroom

DO IT YOURSELF ENTRYPURPOSE: To make bathroom use safer for seniors and individuals with mobility, walking, or balance disabilities. This article, part of the chapter entitled "Bathroom & Washing Up," dicusses ways to provide greater bathroom safety, including using non-slip surfaces in the tub or shower and on the bathroom floor; installing grab bars; ensuring adequate lighting; and having ground-fault-interrupted (GFI) outlets in the bathroom. AUTHOR: Greenstein, D. TITLE: Bathroom Safety.

Steel Bathtub Rail

The Steel Bathtub Rail is a grab bar for bathtub designed for use by individuals with balance or mobility disabilities, spinal cord injury, or arthritis. The rail has two holding areas on the handle for a firm grip when getting in and out of the tub. It has a stainless steel locking system and rubber pads to protect tub contact surfaces, and is available in Fixed Height or Adjustable Height models. WARRANTY: Limited lifetime warranty.

Suction Grab Bar, Adjustable Length

The Suction Grab Bar, Adjustable Length, is a grab bar designed for use by individuals with lower extremity or balance disabilities or arthritis. This bar telescopes for adjustability and can be used on a shower wall, in the bath mounted on the tub, as a temporary towel bar, or near a chair or stairwell for assistance when standing or climbing stairs. It is portable and installs on most smooth surfaces without tools. Large suction cups on each end and secure to the surface with lock/release leve

Suction Grab Bar, Fixed Length

The Suction Grab Bar, Fixed Length, is a grab bar designed for use by individuals with lower extremity or balance disabilities or arthritis. This bar can be used on a shower wall, in the bath mounted on the tub, as a temporary towel bar, or near a chair or stairwell for assistance when standing or climbing stairs. It is portable and installs on most smooth surfaces without tools. Large suction cups on each end and secure to the surface with lock/release levers. OPTIONS: Replacement suction cups

Suction Tub Grab Bar (Models 1255A, 1255B, & 1255C)

The Suction Tub Grab Bar is a bathtub grab bar designed for use by individuals with balance or mobility disabilities. The adjustable length bar attaches with suction. SIZES: Small (model 1255A), medium (model 1255B), or large (model 1255C). DIMENSIONS: Length is 17.25 to 22.25 inches (small), 22 to 27 inches (medium), or 26 to 30.75 (large). CAPACITY: 250 pounds. COLOR: White. WARRANTY: Three-year warranty on the grab bar, one-year warranty on the suction cups.

Sure-Safe Bathtub Rail (Model 2032A)

The Sure-Safe Bathtub Rail, model 2032A, is a grab bar for bathtub designed for use by individuals with balance, lower extremity, or mobility disabilities. Made of heavy-gauge, welded steel, this unit provides two gripping surfaces to facilitate both entry and exit from tub. A clamp holds the unit firmly to the tub wall without marring tub surface. DIMENSIONS: The unit fits tubs with walls 2.75 to 6.5 inches thick. CAPACITY: 250 pounds. COLOR: White. WARRANTY: Lifetime limited warranty.

Sure-Safe Chrome Bathtub Safety Rail (Model Gf2033-1)

The Sure-Safe Chrome Bathtub Rail, model GF2033-1, is a grab bar for bathtub designed for use by individuals with balance, lower extremity, or mobility disabilities. This rail provides support for the user when moving in and out of the tub. It has a knurled top to minimize hand slippage, even when wet. Constructed of one-inch chrome-plated steel, it has rubber pads at all contact points to help eliminate scratching the tub surface. The unit comes fully assembled with an included hex wrench for i

Travel Assist Bar

The Travel Assist Bar is a grab bar for the bathtub designed for use by individuals with balance or mobility disabilities. Made of heavy-duty plastic, this handle on a round base adheres to the tub or wall using the large suction cup on the bottom. DIMENSIONS: 4.5 inches long. COLOR: White.

Travel Bath Safety Grip Handle

The Travel Bath Safety Grip Handle is a suction grab bar designed for use by individuals with balance or mobility disabilities. It is made of durable plastic with a large suction base to provide extra stability. This grab bar can be installed on any smooth, non-porous tile or tub surface. Installation requires opening the handles, moistening the suction pad, and pressing the handle against the surface while closing the handles. DIMENSIONS: Suction cup is 3.75 inches in diameter.

Tri-Grip Bathtub Rail

The Tri-Grip Bathtub Rail is a grab bar for the bathtub designed for use by individuals with mobility disabilities. The rail provides the individual with three gripping areas for support while moving into or out of the bathtub. Each gripping area has a textured finish. The rail clamps to the tub with adjustable spring steel clamps lined with rubber pads to protect the tub. DIMENSIONS (HxW): 7.5 and 16 x 18 inches. The clamp adjusts from 3.5 to 6 inches in unlimited increments. COLOR: Chrome fi

Tub / Shower Bar (Model 3636-V)

The Tub/Shower Bar ##3636-V is a stainless steel wall mounted grab bar for showers and bathtubs. The support consists of an L-shaped horizontal bar that provides a grab surface on the back and side walls, and a connected vertical bar for additional hold when entering or leaving the bathing area. The bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS: 32 x 36 x 32 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Brushed Sati

Tub Entry Bar (Model 2010)

The Tub Entry Bar ##2010 is a stainless steel floor mounted grab bar for bathtubs. The bar is designed to be mounted on the outside of the tub to provide two handed support, and consists of one U-shaped tube double-angled to form a support that extends vertically to the edge of the tub, horizontally over the tub wall, and down again inside the tub. This support is available in 4 concealed or 4 exposed mounting styles. DIMENSIONS: 20 (H, outside tub) x 9 (D) x 18 (W) x 10 (H, inside tub) inches w

Tub Grab Bar (Model 08220)

The Tub Grab Bar, model 08220, is a grab bar for bathtub designed for use by individuals with balance disabilities or lower extremity disabilities who require support transfering into and out of the tub. The Tub Grab Bar is made of powdered coated steel tubing and is equipped with rubber-covered clamps that resist slipping and protect surfaces from scratching. No tools are necessary for installation. The grab bar has a cross bar for increased safety and stability. DIMENSIONS (HxW): 12 inches

Tub Grab Bar (Model 564232 )

The Tub Grab Bar, model 564232 is a U-shaped grab bar designed for use by individuals with balance or lower extremity or mobility disabilities. This economy tub bar provides two gripping surfaces. The upper gripping position is intended to assist in entering the tub without use of wrist or body, and the lower position is designed to assist in lowering into or rising from a seated position in the tub. It has an adjustable locking mechanism for stable positioning. This molded bar is lightweight, p

Tub Grab Bar (Model 98005)

The Tub Grab Bar, model 98005, is a grab bar for the bathtub designed to attach to the side of the bathtub to assist individuals getting into and out of the tub. It is made of nylon coated steel and has multi-level hand holds. DIMENSIONS: Clamp adjustment 3 to 7 inches; height above the tub wall is 15 inches; overall width is 8 to 11.25 inches. WEIGHT: 6.5 pounds. COLOR: White, almond or blue.

Tub Grab Bar (Model K10365)

The Tub Grab Bar, Model K10365, is a safety device for entering or exiting a bathtub designed for persons with physical disabilities or balance problems. The vertical, white plastic curved grab bar attaches to the side of the bathtub and can be gripped at a high-level when entering the tub and at a lower level grab bar when exiting. The finish is textured to prevent slippage and rubber lined pads at the bar's base prevent scratches to the tub. Installation requires no tools and the height can ea

Tub Safety Bar

The Tub Safety Bar is a grab bar for bathtubs designed for use by individuals with mobility and balance disabilities. This heavy-duty chrome-plated steel bar clamps to the edge of most standard tubs and features a horizontal gripping area gradually rising to a vertical gripping area.The Lok-Fit design ensures secure support while vinyl sleeves protect the tub from scratches. DIMENSIONS: The clamps adjust to fit tubs from 3 to 6.5 inches wide. The bar is 17 inches long and 15 inches high at its h

Tub-Guard Bathtub Safety Rail (Models 69263A & 69663A)

The Tub-Guard Bathtub Safety Rail, models 69263A and 69663A, is a grab bar for bathtub designed to assist people with balance or mobility disabilities to enter and exit the tub. The device has a molded plastic body and a textured surface to reduce hand slippage. A lever-operated clamp and rubber pads at tub attachment points prevent movement or scratching the tub surface. SIZES: Standard (model 69263A) and Tall (69663A). DIMENSIONS: Height is 12 inches (standard) or 16.5 inches (tall); fits tub

Two Wall Shower / Tub Compartment Grab Bar (Models B-68616 & B-68616.99)

The Two-Wall Shower/Tub Compartment Grab Bar, models B-68616 and B-68616.99, is a wall mounted grab bar for use with a bathtub or shower. It is intended for use by people with balance, lower extremity and mobility disabilities. This L-shaped grab bar mounts in a corner on two walls. It is constructed of type 304 stainless steel 18-gauge tubing with a satin finish (model B-68616.99 is peened). It has 3 concealed mounting flanges with a stainless steel plates and screw holes for concealed anchors.

Two Wall Tub / Shower Toilet Compartment Grab Bar (Models B-68137 & B-68137.99)

The Two-Wall Tub/Shower Toilet Compartment Grab Bar, models B-68137 and B-68137.99, is a wall mounted grab bar for use with a bathtub, shower or toilet. It is intended for use by people with balance, lower extremity and mobility disabilities. This L-shaped grab bar mounts in a corner on two walls. It is constructed of type 304 stainless steel 18-gauge tubing with a satin finish (model B-68137.99 is peened). It has 3 concealed mounting flanges with a stainless steel plates and screw holes for con

Vertical Tub Safety Bar

The Vertical Tub Safety Bar is a grab bar for bathtubs designed for use by individuals with mobility and balance disabilities. This vinyl-coated steel rounded A-shaped bar clamps to the edge of most standard tubs with a screw clamp. Inner rubber pads protects the tub from scratches. COLOR: White.

Wall Mounted Tub Rail (Model 2040)

The Wall Mounted Tub Rail ##2040 is a stainless steel grab bar for use in bathtubs. The support consists of an L-shaped bar designed for mounting in the corner of the walls of the tub area. This rail is available in 4 concealed and 4 exposed mounting styles, and can be mounted for either right or left handed use. DIMENSIONS: 36 x 48 inches with 1, 1.25, or 1.5 inch diameter tubing. Safety clearance is 1.5 inches. FINISH: Standard finish is Brushed Satin; optional finishes include non-slip safety

Wall Suspended Tub Rail (Model 1236)

The Wall Suspended Tub Rail ##1236 is a stainless steel wall mounted grab bar for bathtubs. The support consists of a U-shaped bar with 2 mounting points, and 2 L-shaped extension arms that are attached to the underside of the hand bar and mount to the wall. This grab bar is available in 4 concealed or 4 exposed mounting styles. DIMENSIONS: 36, 40, 42, or 48 inch crosspieces; hand bar extends from wall 12 inches; extension arms are 8 x 12 inches. FINISH: Brushed Satin is standard; optional finis

White Bathtub Rail

The White Bathtub Rail is a grab bar for the bathtub designed for use by individuals with mobility disabilities. The wide contact area of this rail helps disperse the weight evenly. This rail is suitable for use on fiberglass tubs. It attaches to the tub with a mounting clamp. DIMENSIONS (HxDxW): 13.5 x 1 x 7 inches. The clamp adjusts from 2.5 to 5 inches in unlimited increments. COLOR: White

Parent Category: Grab Bars
 
Processing...


Driving Walking/Biking Public Transit  Get Directions