The 200 Series Hand/Hair Dryers are electric dryers designed for one handed use in public restrooms. The cover, nozzle, and pushbutton are made of rust and corrosion free diecast zinc with satined chrome over a nickel finish. The motor is a PSC induction motor (brushless), 1/10 HP, thermally protected, with self aligning quiet bearings and resilient ring motor mounts. The heating element is a 2000 watt nickel chromium blower that is inlet mounted (inaccessible through the nozzle), and protected
The 200 Series Towel Dispenser ##250-15 is a wall mounted dispenser of paper towels designed for use in public rest rooms. The unit is fabricated of 22 gauge stainless steel with exposed surfaces in architectural satin finish. The dispenser has smooth corners and a tumbler lock. The cabinet is hinged at the bottom to allow facilitated filling. The refill indicator slot is located on the face of the cabinet. The dispenser opening has a rolled edge. The unit is surface mounted on the wall with mou
The 32-Foot Wheelchair Accessible Restroom Trailer is a portable accessible restroom designed for use by individuals with mobility disabilities or spinal cord injury. This unit provides a wheelchair accessible restroom on a trailer equipped with air conditioning and heating, hardwood floors, oak paneling, and brass fixtures. The wheelchair accessible section has one accessible private toilet stall. The trailer also includes non-wheelchair accessible sections for men and women. The ladies' restro
ADA Compliant Classroom Sinks are accessible sinks for use in a classroom environment. The sinks are available with the faucet on the left ledge with bubbler on the right ledge or vice versa; the faucet on the rear ledge with the bubbler on the left or right ledge; or both the faucet and bubbler on the right or left ledge. Drain is located in the center unless otherwise specified. The sinks are made of seamless 18 gauge type 304 stainless steel. Interior and top surfaces polished to a satin fini
The ADA Compliant Wall Hung Lavatory, model HCL-23520-T, is an accessible sink for use in public restrooms and classrooms that includes a J1174KS faucet and J115FS drain. Drain locations are centered unless otherwise specified. This model is available with rear mount concealed overflow feature. The sink is made of seamless 18 gauge type 304 stainless steel. All interior and top surfaces are polished to a satin finish. Sink is undercoated with a smooth, sound-deadening material. The sink is insta
The Aircraft ADA Recessed Hand Dryer, mode 750, is designed for use by people who have upper extremity disabilities or use of only one hand. It is made of cast iron with white vitreous enamel finish, and its sensor automatically turns the dryer on and off by sensing hand movement. The direction of the air can be adjusted. POWER: Available versions that can be powered by 115 volt or 222 volt power source. WARRANTY: 3 years on motor brushes; 10 years on all other parts.
The Angle-Frame Two Position Tilt Mirror, model B-294, is a tilting mirror designed to provide easy visibility for persons in wheelchairs. This mirror has a type 304 stainless steel frame with satin finish, a float/plate glass mirror and a self-locking mechanism. The top of the mirror extends 7 inches from wall and the bottom of the mirror mounts on the wall with a full-length stainless steel hinge. DIMENSIONS (HxW): 30 x 16 inches. WARRANTY: 15 year warranty.
The Barrier Free Accessible Vanity Systems are modular, wall mounted units designed for wheelchair clearance in the lavatory. Eight series of models are available in a variety of lengths and configurations from a single bowl vanity 18 inches in length to multiple bowl units up to 144 inches in length. Each series features standard stainless steel towel dispensers, waste doors, soap dispensers, and a variety of faucets and fittings.
Lavatory with blade faucets, meets ANSI A117.1 1980 specifications. Countertop model, stainless steel, 17 1/8 by 11 3/4 inches, 5 inch apron. Mirror, towel dispenser, optional cup dispenser, waster receptacle, light, electrical outlet optional.
The DesignerSeries 1040 Toilet Partition System are accessible restroom stall partitions designed for use by people with grasping, fine motor, neurological or upper extremity disabilities, arthritis or other conditions that may cause weakness in the hands. Custom made to fit field conditions, these partitions are made of industrial grade particle board with stainless steel edge trim and concealed stainless steel hardware. They are scratch, dent and impact resistant and allow for complete removal
The Fastaire, models, HD03 and HD04, are electric hand dryers designed for use by individuals with one hand. These warm air hair dryers are easily operated and the direction of air is easily adjusted.
The Fixed Tilt (##740) and Adjustable Tilt (##741) Framed Mirrors are tilting mirrors designed for use in public restrooms. These mirrors have 18 gauge stainless steel frames with Heliarc welded corners and 20 gauge angle stiffeners wleded to the frame for additional rigidity. The backs of the mirrors are 20 gauge galvanized steel, secured to the frame with concealed screws. The mirrors are 1/4-inch float glass, triple silver plated with an electro-copper plated layer and thermosetting infrared
The Fixed Position Tilt Mirror, model B-293, is a tilting mirror designed to provide easy visibility for persons in wheelchairs. This mirror has a stainless steel frame with float/plate glass mirror. The top of the mirror extends 4 inches from wall and tapers to 1 inch at bottom. DIMENSIONS (HxW): 30 x 16 inches; 30 x 18 inches; 36 x 18 inches or 36 x 24 inches. WARRANTY: 15 year warranty.
Electric Hand Dryer, 115 volts, 15 amps. Also available in 230 volts, 10 amps-0113 R. Available in recessed model(0115R) or surfaced mounted model- (0101). Universal type motor 1/100 horse power, and life lubricated, fully sealed ball bearings, self cleaning and self cooling. Chrome plated "Push" bar for easy activation and positive stop protective timer. 30 second shut off.
Wheelchair accessible portable toilet. Fiberglass entry ramp 49 by 60 inches. 24 inch grab bars on 2 walls. Constructed of lightweight fiberglass. Dimensions: 87 inches high by 61 inches wide by 61 inches deep. 45 gallon tank capacity. Non-skid flooring.
Adjustable tilt frame with mirror, designed to provide easy visibility for persons in wheelchairs. Frame fabricated entirely of 18 gauge stainless steel with corners welded and ground smooth. tilts a full 7 inches with bottom mounted on stainless steel piano hinge. Standard sizes: MODEL 0600TA 16 by 24 inches, MODEL 0601TA - 16 by 30 inches.
Portable wheelchair accessible restroom. Three grab bars on walls, designed to allow forward, side or back transfers. Interior floor space, 48 by 48 inches. Door, 34 inches wide, adjustable timed release door closer, slide bolt interior lock and hasp and padlock exterior lock. Hinged front ramp, 16 by 48 inches. Wall urinal. Roof includes 24 by 36 inch skylight. Sixty gallon tank.
The Hygiene Refresher is designed for individuals with limited upper body mobility or for persons who cannot twist at the waist. This product may also be used by individuals who find toilet tissue to be too rough on their skin, or for persons who cannot completely clean themselves after using the restroom, or for persons who prefer a bidet-style way of using the restroom. To use, the user fills bottle with water. Then, the user squeezes the bottle and water sprays out of the nozzle. Lightweight.
Kohler Wall-Mount Lavatories are accessible lavatories designed for use by people with disabilities. The Kingston, Morningside, Greenwich, Chesapeake, and Jamestown models are available. All models are constructed of vitreous china, and most require a Kohler offset drain. DIMENSIONS: Faucet drillings are 4, 8, or 11.5 inches; lengths range from 18 to 24 inches and widths range from 15 to 20 inches; basin depths range from 5.25 to 6.75 inches; minimum rim height installed is 34 inches. COLOR: A c
The NVI Electronic Tissue Dispenser is an electronic toilet paper dispenser designed for use by individuals with grasping, fine motor or upper extremity disabilities. This dispenser uses standard toilet paper rolls and automatically dispenses toilet paper at the wave of a hand. The user places his or her hand in front of the unit’s infrared sensor beam, and the unit issues the toilet paper from the roll. When it reaches the desired length, the user tears off the paper towel using one hand. The u
The NVI Electronic Towel Dispenser is an electronic paper towel dispenser designed for use by individuals with grasping, fine motor or upper extremity disabilities. This dispenser mounts on a wall and automatically dispenses rolled paper towels at the wave of a hand. The user places his or her hands in front of the unit’s infrared sensor beam, and the unit issues the paper towel from the roll. When it reaches the desired length, the user tears off the paper towel using one or both hands. The uni
The Recessed Paper Towel Dispenser, models B-318, B-359 and B-35903, is a manual paper towel dispenser designed for use in public restrooms. Made of type 304 stainless steel with satin finish, this unit mounts in a rough wall opening (screws not included). The user pulls down on the paper towels that extends from the bottom of the unit to get a single paper towel. Towel size and capacity varies by model. OPTION: TowelMate allows the unit to dispense narrower towels than specified. DIMENSIONS (H
Accessible restroom stall partitions, 34 inch door with 38 inch wide stall, 36 inch door with 60 inch wide stall. Outswinging door optional, latching device easily grasped. Mounts to ceiling or floor. Optional steel/enamel, plastic laminate/particleboard core, plastic laminate/ solid phenolic core, stainless steel material composition. Depth of stall is optional, 54 inch high optional coat hook and optional partitions reinforced for grab bars.
Firm pillow is designed for individuals who have sleep apnea and to keep C-PAP and Bi-PAP face masks in place. Its shape helps prevent leaks and pressure points. Washable polyester/cotton cover. Polyester fill. 27"x19"x4-1/2". Sleep apnea pillow is firmer and designed especially for C-PAP and Bi-Pap users to help keep face masks in place. Pillows shape helps keep mask in place and prevents leaks and pressure points. Accommodates multiple sleeping positions, side, stomach and back. Removable cove
Accessible restroom stall partitions, 32 inch door with 36 inch wide stall and 34 inch or 36 inch (optional) door with 60 inch wide stall. Outswinging door and latching device easily grasped. Mounts on ceiling or floor. Steel/enamel or plastic laminate material composition. Depth of stall optional. Coat hook mounted at 57, 60 or 72 inches. Partitions can be reinforced for grab bars.
The Surface-Mounted Paper Towel Dispenser, models B-262, B-2620, B-2621 and B-26212, is a manual paper towel dispenser designed for use in public restrooms. Made of type 304 stainless steel with satin finish, this unit mounts on a wall (screws not included). The user pulls down on the paper towels that extends from the bottom of the unit to get a single paper towel. Towel size and capacity varies by model. OPTION: TowelMate allows the unit to dispense narrower towels than specified. DIMENSIONS
Accessible mirrors: model 573 fixed tilted, model 582 adjustable tilted stainless steel mirrors, 16 by 30 inches.
Towel dispenser mounted with highest operating device 48 inches above the floor, optional operation by pulling individual towel, or continuous cloth requiring two hands.
Trap Gear is a pipe wrap designed to go around exposed pipe surfaces, joints, and valves underneath public washroom sinks to protect wheelchair users from burns, cuts and abrasions resulting from contact with lavatory supply and waste lines. MATERIAL: Trap Wrap is made of vinyl plastisol, a durable PVC plastic. Ultraviolet (UV) and anti-fungal inhibitors ensure that the color will not fade due to exposure to UV rays and will prevent growth of fungus. The surface temperature remains below 95 degr
The TrimLineSeries 1030 Toilet Partition System are accessible restroom stall partitions designed for use by people with grasping, fine motor, neurological or upper extremity disabilities, arthritis or other conditions that may cause weakness in the hands. Custom made to fit field conditions, these partitions are made of industrial grade particle board with stainless steel edge trim and concealed stainless steel hardware. The can be mounted on the floor with or without overhead bracing or hung
The Wheelchair Accessible Mobile Restroom is a portable accessible restroom designed for use by individuals with mobility disabilities or spinal cord injury. This portable restroom features ground-level access, handrails, and an interior that allows wheelchairs to turn 360 degrees.
Wipe Assist is a product designed for individuals who have limited upper body mobility and find it difficult to adequately wipe themselves or for persons that cannot turn their torso and/or reach around in order to fully wipe themselves. Made especially for individuals with grasping, neurological, reaching, or upper extremity disabilities. The device is designed to hold toilet paper 16 inches out from where the user can reach. Wipe Assist allows users to wipe independently and without assistance