Prosthetics General

Results: 25

3D Printed Bionic Hand

This 3D Printed Bionic Hand is a hand made for people without hands to give them the ability to function with a hand. It is 3D printed, can be made at home, and for a fraction of the cost. Normally, a prosthetic hand would cost £80,000, but this bionic hand costs under £2,000. This prosthetic was developed to give disabled people more control over their lives and accessibility.

Amoena Affinity 802

The Amoena Affinity 802 is a prosthetic breast form designed for women who have had a mastectomy. It features a contour shape, a hook-and-loop system. This breast form attaches directly to the body and is intended for all-around use. This product comes in a soft case designed for discreet protection during storage or travel. SIZES: 1 - 9 for the left or right. COLOR: Tawny or on a special order basis.

Armrx Arm Glove

The ArmRX Arm Glove is a cast or prosthesis protector designed to protect upper extremity casts, prostheses, lacerations, surgical sites, or skin conditions from exposure to water while showering. These long, disposable clear polyethylene gloves extend above the elbow and are held in place by two adjustable hook-and-loop straps at the top.

Asymmetrical Shape Prosthesis (Model 11200, 11202, 11400, & 11401)

The Asymmetrical Shape Prosthesis, models 11200, 11202, 11400, and 11401, is a breast form designed for wear by women who have had modified mastectomies. Made of medical-grade silicone for the weight, feel, and flexibility of the natural breast, this prosthesis has a natural soft film cover that clings gently to the skin and a concave back to permit air flow and a comfortable fit. Available in models for the right or the left side, with or without a nipple, this prosthesis fills the upper chest

Classic 552, Classic Light 553, & Original Classic

The Classic 552, the Classic Light 553, and the Original Classic 350 are prosthetic breast forms designed for women who have had mastectomy. The Classic 552 is an asymmetric breast form that features a concave back designed for greater air flow and comfort. It also offers upper chest and underarm extensions. The Classic Light 553 is a special version of the Classic 552 and is designed for women who require less weight than the conventional breast form. The Original Classic 350 is designed with

Contour Series

The Contour Series (models 454, 464, 455, 484, & 430) are prosthetic breast forms designed for women who have had a mastectomy. The 454 consists of a symmetrical teardrop shape and can be worn on either the left or right side; it also can be rotated in order to accommodate missing tissue under the arm or in the upper chest wall. The 464 is a symmetric heart-shaped breast form that can be worn on either the left or right side; it is designed with slight upper chest and underarm extensions. Th

Dak Breast Form

The DAK Breast Form is a breast prosthesis designed for use by women who have had a masectomy. Forms are made of silicone rubber gel encapsulated in a durable micro-thin polyethylene shell. They have a contoured shape with a discrete raised nipple, and are worn directly inside a bra or bathing suit. They can be washed with a mild soap. COLOR: Pink. GUARANTEE: 30-day money-back guarantee. The unused product may be returned within 30 days for a refund of the product's purchase price, not including

E-Z Hook Tension Band Applier

The E-Z Hook Tension Band Applier is a hand-held prosthesis accessory designed to allow upper extremity amputees to apply tension bands to their hooks.

Foot, Hand And Face Prostheses

Custom foot, hand or face prostheses. Fabricated of silicone, each prosthesis is sculpted and painted to match. The finish is resistant to stains such as ballpoint pen ink and newsprint. Facial prostheses use medical adhesives, hand and foot prostheses stay on due to tight fit. Cleaned with hot water and soap. Molds and final painting are done in local prosthetics shop. Require 2 to 5 days for fabrication. Life Like Laboratory maintains are molds for 15 years in order to fabricate less expensive

Hands Free Tool Changing Station (Model Rch06-0N2)

The Hands Free Tool Changing Station, model RCH06-0N2, is a prosthetic accessory and terminal device changing station designed for use by individuals with upper extremity amputation who use hand prostheses. This unit enables the user to change upper extremity prosthetic terminal devices without the use of hands. The unit has three Acidel Delran tool holders made of 316 stainless steel mounted on a single base. DIMENSIONS: Base is 7.88 x 8.38 inches; tool holders are 2 inches tall.

Leisure Teardrop 317

The Leisure Teardrop 317 is a prosthetic breast form designed for women who have had a mastectomy. This breast form can be worn on either side of the body and is designed to provide greater comfort for sports, gardening and other leisure activities. It has a light weight silicone form and a permanent fabric covering. SIZES: 1 to 11. COLORS: Tawny or on a special order basis.

Lightweight Silicone Prosthesis (Model 2361)

The Lightweight Silicone Prosthesis, model 2361, is a breast form designed for use by women who have had masectomies. This whipped silicone form is extra soft to create a lower center of gravity that matches the drape of the mature breast. The rounded side wings help it fit the curve of the bra cup. OPTIONS: Extra cover (model 2363). SIZES: Even sizes 28 to 54.

Nouvelle 701

Nouvelle 701 is a prosthetic breast form designed for women who have had a mastectomy. It features a two-layer design, a silicone gel back, and an even distribution of weight for a light fit. This breast form is designed to adapt swiftly to any body temperature and comes in a soft case for discreet protection during storage or travel. SIZES: 1-12 left/right. COLOR: Tawny or on a special order basis.

Oval Shaped Breast Form (Model 11537)

The Oval-Shape Breast Form, model 11537, is a breast form designed for wear by women who have had mastectomies. This oval-shaped prosthesis has a flat back and is made of waterproof silicone, covered with polyurethane film. SIZES: Even sizes 32 to 48. warranty.

Partial Breast Forms (Models 2469, 2470, & 2471)

Partial Breast Forms are breast forms designed for use by women who have had conservative breast surgery. These partial external forms are made from silicone and can be incorporated into a bra or attached directly to the skin using a suitable adhesive. Forms are symmetrical for use on either the left or right side, and are available in three different shapes: semi-circle (model 2469); long oval (model 2470); or short oval (model 2471).

Pear Shaped Breast Form (Model 2358)

The Pear Shaped Breast Form, model 2358, is a breast form designed for wear by women who have had mastectomies. Lightweight for leisure wear, this pear-shaped prosthesis with a concave back is made of fabric-covered molded polyurethane. SIZES: S (32-34), M (36-38), L (40-42), or XL (44-46). COLOR: Nude.

Personally 651

Personally 651 is a prosthetic breast form designed for women who have had a mastectomy. It features a two layer design with a soft front layer and a firm back layer designed to simulate the muscle tissue. It offers a comfortable and supportive fit and is designed to be especially soft. SIZES: 0 - 12 for the left or right. COLOR: Tawny or on a special order basis.

Prosthetic Sheath (Model 79000)

The Prosthetic Sheath, model 79000, is designed with an open mesh construction which conforms to shape while allowing for needed ventilation. Made of stretchable nylon and polyester, it is designed to prevent any looseness that might cause soreness or discomfort. The top area of the sheath is designed with a turned welt construction intended for added strength while the toe area is reinforced. White in color, it is available in three lengths for below the knee application. SIZES: Short (10-14 in

Seattle Stainless Steel Components (Model Sca260, Sca270, Sca280)

The Seattle Stainless Steel Components is a socket mounting system designed to be used in endoskeletal construction with Seattle Limb Systems. The system includes the Seattle S.S. Socket Pyramid, the Seattle S.S. Clamp Adaptor, and the Seattle S.S. Foot Pyramid. The Socket Pyramid uses the standard 4-hole mounting pattern and is compatible with the Seattle Laminating Block and the Seattle Mounting Plate. The Clamp Adaptor effectively holds nylon, composite and aluminum 30 mm pylons and provides

Seattle Titanium Components (Model Sca210, Sca220, Sca240)

Seattle Titanium Components is a socket mounting system designed to be used in endoskeletal construction with the Seattle "Light" Limb System for individuals with lower extremity prosthetics. The system includes the Seattle Socket Pyramid, Seattle Clamp Adaptor, and the Seattle Foot Pyramid. They are manufactured using sintered titanium, so they are strong, yet lightweight. The Socket Pyramid uses the standard 4-hole mounting pattern and is compatible with the Seattle Laminating Block and the Se

Soft Secret Silicone Breast Prosthesis

The Soft Secret Silicone Breast Prosthesis is a breast form designed for women who have undergone a mastectomy. The triangular, symetrical prosthesis matches the natural breast in contour, softness, and mobility. The moderate weight creates a natural drape that closely matches a mature breast. Available with or without an internal colored nipple, the prosthesis includes a comfortable cloth cover that will not slip or twist. SIZES: 1 through 12.

Symmetrical Shape Demi Breast Form (Model 2360)

The Symmetrical Shape Demi Breast Form, model 2360, is a breast form designed for wear by women who have had lumpectomies. Made of silicone gel covered in polyurethane, this form has a symmetrical shape and a deep concave back and can be fiitted on the right or left side. SIZES: Even sizes 32 to 46.

Teardrop Shape Prosthesis (Models 1149 & 11441)

The Teardrop Shape Prosthesis, models 1149 and 11441, is a breast form designed for wear by women who have had mastectomies. Made of medical-grade silicone for the weight, feel, and flexibility of the natural breast, this prosthesis has a natural soft film cover that clings gently to the skin and a concave back to permit air flow and a comfortable fit. It can be worn horizontally or vertically on the right or left side, and is available with (1149) or without (11441) a nipple. OPTIONS: Extra cov

Tria 444

The Tria 444 is a prosthetic breast form designed for women who have had a mastectomy. With its triangular shape, this symmetrical breast form can be worn on either side. Its underarm extension is minimized in order to fit the latest surgical techniques of retaining more underarm tissue. It also features a lengthen upper extension designed to provide a better fit. SIZE: 1 to 12. COLOR: Tawny or on a special order basis.

Triangle Shaped Breast Form (Model 2364)

The Triangle Shaped Breast Form, model 2364, is a breast form designed for wear by women who have had mastectomies. Lightweight for leisure wear, this external symetrical prosthesis has a concave back and can be worn on the right or the left side. It is made of fabric-covered molded polyurethane. SIZES: Small (32 to 34), medium (36 to 38), large (40 to 42), or extra large (44 to 46). COLOR: Nude.

 
Processing...


Driving Walking/Biking Public Transit  Get Directions