"DO IT YOURSELF" ENTRY --- PURPOSE: To enable individuals with severe physical disabilities to operate switch-connected devices. To make this switch, use diagonal wire cutters cut the prongs and some of the rim from the lid of the Bubble Tape gum box to prevent it from closing completely. With a soldering iron burn a small hole in the rear side of the container. Run the stripped ends of the phono plug wire through the hole into the gum box. Hot glue the Styrofoam to the inside center of the bot
Miniature push button snap action low force switches with activation pressure from .03 to 4.3 ounces. Switches have built in hysteresis and high reliability. Momentary or on/off.