Caster Chair

Results: 5

Golden Years Activity Chair (Models 510 & 511)

The Golden Years Activity Chair is a caster chair designed for use by individuals with lower extremity or mobility disabilities. This chair has fold-up footrests and five-inch total lock casters. Model 510 has a non-porous blow-molded tray with removable locking function; model 511 has no tray. DIMENSIONS (HxW): 44.5 x 23.5 inches. The seat height is 19 inches above floor level and the back height is 26.5 inches. The seat (LxW) is 20 x 19 inches. CAPACITY: 275 pounds. WEIGHT: 52 pounds.

Mobility Device For General Home Use

CUSTOM ADAPTATION PURPOSE: To provide a mobility device that would allow for movement through a family residence (with many obstacles), and be used as a shower chair for person with severe physical disabilities. A mobile chair was created with a plastic seat mounted on a steel chassis with three 250- millimeter (mm) wheels out of alignment. The wheels each have their own running track and their own axle alignment. The chassis is made from a steel bar shaped to suit the three-wheeled design. The

Pneumatic Roller Seat

DO-IT-YOURSELF-ENTRY --- PURPOSE: To provide independent mobility and exercise away from a wheelchair for a child with muscular dystrophy. A low, backless stool with a padded seat can be adjusted to the proper height to enable the child to propel the stool with his/her feet. The caster wheels should move easily over hardwood or carpet and the seat should swivel 360 degrees. MATERIALS: Low wheeled stool. TITLE: Doing It Yourself. JOURNAL: Quest. REF: Volume 12, Number 1, January/February 2005. WE

Roundabout Chair Available For Another User.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Describes an alternative wheelchair on a low stand, operated with a hand crank. Chair made of an office swivel chair fastened to a heavy plywood base supported on a steel tube frame; there are two fixed wheels in back ( the wheels fit underneath the frame) and one wheel in the front used to steer and propel the chair from post by the rider's knee. A vertical drive shaft motivated by a crankhandle runs down the post and rotates the front wheel through a

Transfer Chair (Model Tc-400)

Transfer chair for in-house transfers. Chair is made of PVC tubing with removable polyester padded cushions. Push handle across back for attendant. Full length armrests. Swingaway footrests. Four 4 inch casters, 2 locking. Optional swingaway arms. Available in eight colors. Width 24 inches, overall height 38 inches, depth 28 inches. Weight 24 pounds. Maximum capacity 300 pounds. .

Parent Category: Wheelchair Alternatives
 
Processing...


Driving Walking/Biking Public Transit  Get Directions