Corner Guard

Results: 11

130Bn Bluenose Surface Mount Corner Guard

The 130BN BlueNose Surface Mount Corner Guard is designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. This product features vinyl retainer which is nearly four times stronger than aluminum retainer, preventing chipped plaster or paint or torn wallpaper resulting from bumping by wheelchairs, scooters, walkers, crutches, or canes. The 130BN is lightweight and comes with top and bottom caps. The angle measures 135 degrees. DIMENSIONS: The wing is 3 inc

150 Surface Mount Corner Guard

The 150 Surface Mount Corner Guard is designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. This product features a continuous aluminum retainer that has pre-slotted holes. The guard can also be used to conceal previous dings and scrapes. Top and bottom caps are included with every unit and can be color coordinated. The angle measures 90 degrees. DIMENSIONS: The wing is 3 inches wide on each side. The rigid vinyl cover is 0.080 inch thick, and the co

160F Flush Mount Corner Guard

The 160F Flush Mount Corner Guard is designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. This product offers minimum design interruption by creating a smooth transition from wall to corner. The 160F is mounted on a sturdy 0.070-inch pre-punched continuous aluminum retainer. Mounting fasteners and closure caps are included with the product. DIMENSIONS: The wing is 2 inches wide on each side with a 90-degree corner angle. The scratch and stain resist

170Fr G2 Bioblend Fire Rated Corner Guard

The 170FR G2 BioBlend Fire Rated Corner Guard is designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. This product meets fire codes with the choice of one- or two-hour fire rating, and offers minimum design interruption by creating a smooth transition from wall to corner. The 0.080-inch non-PVC cover is manufactured with G2 blend Bio-PolyPETG+, which is made with a corn-based biopolymer and recycled content. The 170FR has an easy-wrap cover base aro

Clear Corner Guards

The Clear Corner Guards are designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. The protectors provide wall corner protection for light impact areas. These protectors offer the least amount of design interruption by allowing wall color or pattern to show through. They come with pre-drilled holes and self-tapping screws. Clear adhesive tape is also available. Available wing angles are 90 and 135 degrees. DIMENSIONS: Wing sizes are available in 0.75,

Corner Guard (Model Dl2528)

The Corner Guard, model DL2528, is designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. The protectors prevent chipped plaster or paint or torn wallpaper resulting from bumping by wheelchairs, scooters, walkers, crutches, or canes. These protectors are made from durable plastic molded to fit over corner edges. They come with three screw holes pre-drilled on each side. DIMENSIONS: 48 inches high x 1/16 inch thick x 2.5 inches wide on each side. COLOR

Flexible Corner Guards

The Flexible Corner Guards are designed to protect wall corners from damage by wheelchairs, walkers, and other ambulatory devices. The protectors offer a low profile appearance for minimum design interruption, and protect wall corners from dents and scratches. These protectors feature smooth, stain finish and can be installed with heavy duty adhesive. Available wing angles are 90 and 135 degrees. Angles can be adjusted plus or minus 10 degrees for installation on irregular corners. DIMENSIONS: W

Flush Mount Stainless Steel Corner Guard

The Flush Mount Stainless Steel Corner Guard is designed to protect wall corners from damage by wheelchairs, walkers, and other mobility devices. It is intended to provide impact protection for use in kitchens, sanitary or other high abuse areas; and it offers minimum design interruption by creating a smooth transition from wall to corner. Both Type 304 and Type 430 are available in standard 16-gauge stainless steel. It is installed with screws. DIMENSIONS: Wing sizes are available in 2 or 3 inc

Surface Mount Stainless Steel Corner Guard

The Surface Mount Stainless Steel Corner Guard is designed to protect wall corners from damage by wheelchairs, walkers, and other mobility devices. It provides impact protection in high abuse areas. The Standard Type 430 is available in standard 16-gauge stainless steel, and is also available in 14- and 18-gauge. The Standard Type 304 is available in standard 16-gauge, and is also available in 14-gauge. Custom sizes are also available. The user can choose between two installation methods: cement

Tape-On Woodland Faux Wood Corner Guards

The Tape-On Woodland Faux Wood Corner Guards are designed to protect wall corners from damage by walkers, crutches, and canes. The protectors offer minimum design interruption with its low-profile appearance, and it can be quickly installed with factory applied adhesive tape. No-tape option is also available for installation on vinyl wallcovering with a heavy-duty adhesive. These protectors are made from faux wood. Available wing angles are 90 degrees, 90 degrees bullnose, and 135 degrees. DIMEN

Wall Guard

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with Friedrich's ataxia to maneuver a wheelchair close to a wall to perform activities such as turning off light switches without damaging the walls. Affix a piece of styrofoam to the wall with double-sided tape in areas that are bumped. MATERIALS: Styrofoam and double-sided tape. AUTHOR: Labbe, A. TITLE: Quest Extra: Doing It Yourself. JOURNAL: Quest. WEB SITE: http://www.mda.org/publications/quest/extra/qe14-5_diy.html REF: Volume 14,

Parent Category: Walls
 
Processing...


Driving Walking/Biking Public Transit  Get Directions