• Human-Translated Fact Sheets and Video
  • Large Print

mountainside-medical-equipment-company

Results: 264

Walker Basket With Tray

The Walker Basket with Tray is a tray and wire basket for a walker designed for individuals who carry items when using a walker. The basket attaches to a walker with Velcro and includes a tray and cup insert to prevent items from slipping through the basket. DIMENSIONS (HxDxW): 7 x 6 x 16 inches.

Universal Bath Bench

The Universal Bath Bench is a bath seat designed for use by individuals with mobility and balance disabilities. Available with or without a back, the seat fits in most tubs and shower stalls and can be assembled without tools. A smooth-edge notch on the seat provides placement for a hand-held shower (not included). The all-plastic frame eliminates rusting and the height adjusts by turning the leg base. DIMENSIONS (HxDxW): 17.5 x 18 x 21 inches without back; 29.5 x 18 x 21 inches with back. The

Adjustable Bath And Shower Seat

The Adjustable Bath and Shower Seat is a bath seat designed for use by individuals with mobility and balance disabilities. Available with or without a back, the seat can be used in most bathtubs and shower stalls. The unit's seat and the back are plastic with easy-to-grip handles and molded-in areas for hand-held shower spray storage. The aluminum legs are flared to help prevent tipping and have slip-resistant rubber tips. DIMENSIONS (HxDxW): 15.5 x 16.5 x 18 inches without back; 18 x 16.5 x

Universal Arm Sling

The Universal Arm Sling is an arm sling designed for use by individuals with upper extremity disabilities. The sling supports the arm for recuperation from fractures, sprains, or surgery of the arm or hand. It is sized for both adults and youths and fits either arm. The arm sling comes with an adjustable sizing strap. DIMENSIONS: Fits arms 12 inches and above.

Guardian Easy Care 3000 Lightweight Wheelchair

The Guardian Easy Care 3000 Lightweight Wheelchair is a lightweight wheelchair designed for use by individuals with mobility disabilities. FRAME: Chrome-plated, carbon steel frame. Dual axle allows seat to be adjusted to hemi height. SEAT: Seat widths of 16, 18, or 20 inches are available. UPHOLSTERY: Padded nylon. ARMRESTS: Removable desk arms with padded armrests. WHEELS: Scratch-resistant composite handrim. FOOTRESTS: Swingaway footrests or elevating legrests are interchangeable with the in

Guardian Easy Care 4000 High-Strength Lightweight Wheelchair

The Guardian Easy Care 4000 High-Strength Lightweight Wheelchair is a lightweight wheelchair designed for use by individuals who require a high-strength standard wheelchair. FRAME: The frame design eliminates seat guides and allows for custom backs and accessories. SEAT: Seat widths of 16, 18, or 20 inches are available. Height adjustable seat backs (16, 17, or 18 inches) are offered. ARMRESTS: Flip-back arms with an easy release mechanism. FOOTRESTS: Swingaway footrests or elevating legrests a

Deluxe Bath Safety Mat (Models B3416B & B3416C)

The Deluxe Bath Safety Mat is a bathtub mat designed to prevent slipping for people with balance, mobility, or lower extremity disabilities. Extra large for complete coverage, suction cups over the bottom surface anchor the mat to the tub or shower floor. DIMENSIONS (WxL):16 x 41.25 inches. COLOR: Model B3416B is blue and model B3416C is cream.

Essential Bath Safety Blow Molded Shower Benches (Models B3000 & B3001)

The Essential Bath Safety Blow Moded Shower Benches are shower benches designed for use by individuals with lower extremity, balance, or mobility disabilities. Both models are height adjustable and feature molded, textured plastic seats with drainage holes and a hand cutout on each side, an anodized aluminum frame and legs, and rubber suction cup feet. Model B3000 is a backless bench and model B3001 has a molded, textured plastic back with drainage holes and a hand cutout on each side. DIMENSIO

Essential Bath Safety Blow Molded Bathtub Transfer Bench (Models B3004)

The Essential Bath Safety Blow Moded Bathtub Transfer Bench, model B3004, is a transfer bench designed for use by individuals with lower extremity, balance, or mobility disabilities. This bench is height adjustable and features a molded, textured plastic seat with drainage holes; a solid, textured, contoured seat back that reverses for right- or left-handed use; an anodized aluminum frame with an integral armrest; anodized aluminum legs; and rubber suction cup feet. DIMENSIONS (DxW): The seat

Essential Bath Safety Three Panel Bathtub Transfer Bench (Model B3005)

The Essential Bath Safety Three Panel Bathtub Transfer Bench, model B3005, is a transfer bench designed for use by individuals with lower extremity, balance, or mobility disabilities. This bench is height adjustable and features a molded, textured plastic seat with drainage holes; a solid, textured, contoured seat back with hand slot that reverses for right- or left-handed use; an anodized aluminum frame with an integral armrest; anodized aluminum legs; and rubber suction cup feet. DIMENSIONS (L

Essential Padded Bathtub Transfer Bench (Model B3005P)

The Essential Padded Bathtub Transfer Bench, model B3005P, is a transfer bench designed for use by individuals with arthritis or balance, mobility, or lower extremity disabilities. This bench features a three-section foam-padded, vinyl-covered seat, a foam-padded vinyl-covered back, and a height-adjustable anodized aluminum frame with suction cups on the feet. The back adjusts for right- or left-handed use. DIMENSIONS (DxWxH): The seat is 16 x 30 x 16 to 20 inches. The back is 10 x 16 inches. CA

Temperature Sensitive Bath Mat (Model B3450)

The Temperature Sensitive Bath Mat, model B3450, is a bathtub mat designed for use by individuals with reduced sensitivity to heat. If the water temperature exceeds 115 degrees Fahrenheit, the words "Too Hot" appear in the image on the mat.

Essential Deluxe 3 Pocket Walker Pouch (Model 1216)

The Essential Deluxe 3 Pocket Walker Pouch, model W1216, is a carryin bag for walkers. This bag attatches to a walker cross bar using the Velcro straps and features one large pocket and two smaller pockets with Velcro closures. COLOR: Royal blue.

Easy Basket (Model W1616)

Easy Basket, model W1616, is a wire basket for walkers designed to provide carrying capacity for individuals with mobility disabilities. Made of vinyl-coated metal wire, this baskets hang on the front cross brace of most walkers. DIMENSIONS (LxDxW): 14.5 x 9 x 8 inches. COLOR: White.

Economy Walker Basket (Model F70319-2000)

The Economy Walker Basket, model F70319-2000, is a wire basket for walker designed to provide carring capability for people with walking or balance disabilities. This plastic-coated wire basket attaches to the cross bar and upright bars of most walkers with Velcro strips. The basket includes a heavy-duty plastic tray with one large compartment, a coin or medication holder, an a round compartment for a glass, can, or cup. DIMENSIONS: 5.5 x 16 x 7 inches.

Comfort Seat (Models 1738, 1739, & 1752)

The Comfort Seat, models 1738, 1739, 1752, is a shower chair designed to assist those who are unable to stand in the shower. The seat comes with adjustable legs and is made of molded plastic with built-in handles and slide-proof rubber suction tips. OPTIONS: seat with matching back (1738); seat with adjustable legs, delivered assembled (1752); DIMENSIONS: W x D measured at leg tips 19 x 14 inches; Seat is 20 x 11 3/4 inches; height adjusts from 14 - 21 inches

Versabathseat

The VersaBathSeat is a bath seat designed for use by individuals with mobility disabilities. The unit is adjustable and clamps to most bathtubs, locking with a large adjustment knob. The seat rotates 90 degrees to accommodate both right and left entry and enabling the user to sit on the seat outside the tub and rotate to enter; the process is reversed for exiting the tub. Handles on each side of the seat aid in transfers. This lightweight unit folds for transport and storage. OPTIONS: Hygenic sp

Esmarch Plaster Scissors (Model A6684)

The Esmarch Cast Scissors, model A6684, are cast and splint scissors designed for use in splint and cast removal and fitting. These stainless steel scissors are designed for cutting inner layers of casts or synthetic casting and splinting materials and feature long handles for leverage, as well as slanted blades. DIMENSIONS: The handles are 5.75 inches long and the blades are 2.25 inch long. Total length is 8 inches.

Slip On Knee Support

Knee support. slip on style, seamless elasticized knit material that exerts pressure evenly over site. Washable. Sized by thigh measurement 4 inches above center of patella. Small 13 to 15 inches, medium 15 to 17 inches, large 17 to 19 inches. Fits left or right.

Tennis Elbow Support

Tennis elbow support. Foam laminated to pressure sensitive material. Washable. Available with contoured elbow and loop lock closure. 3 by 20 inches or 3 by 14 inches.

Universal Knee Immobilizer

Knee immobilizer, foam backed pressure sensitive material with 3 heavy duty contoured posterior stays and movable pressure sensitive medial and lateral stays. Alternating velcro straps with loop lock closures. Washable. Fits left or right leg. Pediatric 10 inch length, or in 16, 22 and 26 inch lengths that fit up to 32 inch thigh circumference. Additional 18 inch length pressure sensitive stays can be ordered.

Elastic Wrist Support

Wrist support. Firm elastic construction with foam padding at thumb hole and interior velcro closure along dorsal forearm. Washable. 6 inches long. Available in palm width sizes: small 2 3/4 to 3 inches, medium 3 1/4 to 3 1/2 inches, large 3 1/2 to 4 inches. for right or left hand.

No-Wire Walker Basket

The No-Wire Walker Basket is a caddy for a walker designed for use by children or adults with mobility disabilities. Made of polypropylene, this basket attaches to the horizontal and vertical bars of the walker on the inside or the outside. Retracting stabilizing arms lock onto the legs of the walker to eliminate swinging. A slot on the front of the basket holds an identification tag. The bottom of the basket features a built-in glass, can, or cup holder; a smaller compartment for coins or medic

Invacare Infinity Drop Base

The Invacare Infinity Drop Base is a drop base for a wheelchair cushion designed for use by individuals who propell a wheelchair by foot or who require a lower seating position. This height-, angle-, and width-adjustable base enables the cushion to be dropped lower within the wheelchair frame than the standard seat. Quick-release hardware permits portability and provides secure attachment to most wheelchairs.

Comfort Shower Chair

The Comfort Shower Chair is a shower stool designed for use by individuals with mobility disabilities. This chair has a tubular frame and armrests, a padded backrest, and a padded commode-style seat. DIMENSIONS: The seat is 14 inches wide and the base is 22.5 x 20 inches. CAPACITY: 335 pounds.

Invacare 9000 Xdt

The Invacare 9000 XDT is a manual adult wheelchair designed for use by tall and/or heavy individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with crossbraces in a variety of colors. Push handles are standard. The frame is available in tall, standard adult, and hemi. The standard frame color is chrome; cobalt blue, red, black, or silver vein are optional. SEAT: The seat is available in a choice of 16, 18, 20, or 22 inches wide. The standard seat depth is

Invacare Mg

The Invacare MG is a manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with 16-gauge. Push handles are standard. The chrome frame is standard; black and silver vein are available. SEAT: The seat is available in a choice of 16 or 18 inches wide. The seat depth is 16 inches. The seat-to-floor height is 21 inches. The fixed back height is 16 inches. UPHOLSTERY: Flame-retardant vinyl upholstery in a choice of

Invacare Action P7E

The Invacare Action P7E is a powered wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding frame in a choice of electric red, electric blue, wet black or evergreen with navy. The chair folds to 13.75 inches wide including the joystick. Open, the chair is 23.25 to 25.25 inches wide x 41.75 to 43.75 inches long x 37 inches high. The turning radius is 34.5 inches. CONTROLS: Accessible on/off toggle switch and Mark IV sized- and styled-joystick with programmable thro

Cambered Sure Glide Brakes (Models 6274 & 6263)

The Cambered Sure Glide Brakes are rear brake attachments designed for use with 3- or 5-inch single fixed wheel attachments (sold separately). These brakes operate without interfering with the normal use of the walker. DIMENSIONS: Model 6274 are 10-inch extensions and model 6263 are 13-inch extensions.

Walker Pouch (Model 6015-4)

The Walker Pouch, model 6015-4, is a carrying bag for a walker designed to provide carrying capability for individuals with mobility disabilities. Designed to fit adult walkers, this pouch is made of lightweight, water-repellent denier nylon with urethane-coated backing. This bag attaches over the front crossbar of the walker and features an inner and an outer pocket. COLOR: Forest green and deep blue sea combination. WARRANTY: One-year limited warranty.

Forearm Crutches (Models 6152, 6153, & 6154)

The Forearm Crutches are forearm crutches designed for use by individuals with mobility disabilities. These vinyl-coated, height-adjustable aluminum crutches have solid aluminum cuffs, cushioned vinyl handgrips, and extra-large crutch tips. SIZES: Model 6152 is a junior model designed for individuals from 4 feet, 7 inches tall to 5 feet, 3 inches tall. Model 6153 is a standard adult model for individuals 5 feet, 2 inches tall to 5 feet, 10 inches tall. Model 6154 is a tall adult model for indivi

I-Class Heavy-Duty Transfer Bench

The I-Class Heavy-duty Transfer Bench is designed for use by individuals with mobility disabilities while bathing. This height-adjustable bench has an anodized aluminum frame with nine height adjustments in one-half-inch increments; non-slip, non-marring rubber tips; a shower curtain opening; built-in soap dish and hand-held shower holder; and an aluminum arm rail. The one-piece blow-molded seat is textured for a non-slip finish and has drain holes. The molded, ergonomically-shaped backrest snap

Ensolite Padded Transfer Bench

The Ensolite Padded Transfer Bench is designed for use by individuals with mobility disabilities while bathing. This height-adjustable bench has an anodized aluminum frame with nine height adjustments in one-half-inch increments; non-slip, non-marring rubber tips; and an aluminum arm rail. The back and seat are padded with closed-cell, water repellent Ensolite foam for a seamless, cushioned seating surface. OPTIONS: A commode seat with container and leg pieces with suction cups are available. DI

Vinyl Padded Transfer Bench

The Vinyl Padded Transfer Bench is designed for use by individuals with mobility disabilities while bathing. This height-adjustable bench has an anodized aluminum frame with nine height adjustments in one-half-inch increments; non-slip, non-marring rubber tips; and an aluminum arm rail. The vinyl seat and back are padded with open-cell foam for comfort. OPTIONS: Leg pieces with suction cups and a commode seat with container are available. DIMENSIONS: The frame tubing is one-inch in diameter. The

Invacare Curved Back & Invacare Pneumatic Curved Back

The Invacare Curved Back is a back support cushion for use with wheelchairs. Designed for users who require a solid back support, it features both comfort and visco-elastic foam and a built-in sacral positioning pad. The Invacare Pneumatic Curved Back includes a pneumatic lumbar support bladder. OPTIONS: Lateral supports, neck supports, and shoulder supports.

Invacare Kinesthetic Seating System (Kss) And The Invacare Kinesthetic Seating System Deluxe

The Invacare Kinsthethetic Seating System is a modular seating system designed for use with wheelchairs. This fully-adjustable system provides a personalized fit and accommodates growth. The system includes the Invacare Curved Back, the Invacare Ulti-Mate (also sold separately; see separate entries), basic headrest, fixed lateral support, padded lap belt, fixed growth bracket, and mounting hardware. The Deluxe system includes the components of the basic system plus swing-away lateral supports an

Leg Contracture Pad (Models 703080 &703082)

The Leg Contracture Pad is a legrest panel designed for use by individuals who use wheelchairs and whose legs are in flexion contracture. This unit fits between the legrests between the seat and the footplates and has a firm foam-padded plywood base covered in wipe-clean vinyl. DIMENSIONS: Model 703080 feets 16-inch wheelchairs and model 703082 fits 18-inch wheelchairs.

Stop-Strip

The Stop-Strip is a wandering patient system designed to direct individuals with Alzheimer's Disease or other cognitive disabilities away from exit doors, stairwells, and other dangerous areas. This strip affixes to the door frame with Velcro and extends across the door, creating a visual barrier. COLOR: Blaze orange or bright yellow.

Finger Separator Mitts (Model 306130)

The Finger Separator Mitts, model 306130, are restraint mitts designed to prevent individuals with cognitive or behavioral disabilities from injuring themselves or removing tubing. These padded mitts have separate finger channels to spread and hold the wearer's fingers to control contractures. The launderable mitts have a CooLine Mesh top to promote air circulation and reduce hand perspiration. Separate tie straps to assist in restricting arm movements are included. SIZES: Universal. DIMENSIONS:

Comfort Cuff (Model 306010)

The Comfort Cuff, model 306010, is a wrist or ankle restraint designed to prevent individuals with cognitive or behavioral disabilities from injuring themselves. Made of high-pile synthetic sheepskin, these launderable restraints have non-slip buckles that remain secure despite pulling by the wearer and extra-long straps to secure the restraints to a bed or wheelchair beyond the wearer's reach. SIZES: Universal.

Heel / Elbow Protector (Models 503203, 503204, & 503205)

The Heel/Elbow Protector is designed to protect the heels and elbows from pressure sores, friction burns, and abrasions. The built-in soft polyfoam pad is contoured to completely cover the heel, elbow, or knee. The protector's oversized stockinette sleeve keeps the pad properly positioned without constriction. SIZES: Small, medium, or large. COLOR: Color-coded for size.

Foot Elevator (Models 503100 & 503140)

The Foot Elevator is a heel protector designed for use by individuals who are in bed for extended periods. This doughnut-style device lifts the heel off the bed to prevent pressure sores and shearing. The design permits air circulation to aid in the healing of existing sores. This device is covered with perspiration-absorbing fabric, eliminating the need for a separate inner liner, and the Velcro closures provide for easy and secure application. DIMENSIONS: Model 503100 is four inches wide and m

Heel Cushion (Model 503040)

The Heel Cushion, model 503040, is a heel protector designed to prevent pressure sores for individuals who are in bed for extended periods. These cushions have extra-thick foam padding and are covered with perspiration-absorbing fabric. Velcro closure straps provide secure positioning. These cushions have high sides to protect the ankles. SIZES: Universal.

Stay-On Heel Protector (Model 503050)

The Stay-On Heel Protector, model 503050, is designed to prevent preesure sores for individuals who are in bed for extended periods. Made of two layers of synthetic sheepskin, this launderable protector has high sides to protect the ankles and a strap with a slide-lock buckle to prevent the protector from being kicked off. SIZES: Universal.

Foam Heel Protector (Models 503070 & 503080)

The Foam Heel Protector is designed to relieve pressure and prevent pressure sores for people who are in bed for extended periods. Made of polyfoam, these oversized protectors have high sides to protect the ankle and Velcro closure straps to keep them in position. Model 503070 is made of standard foam and model 503080 is made of convoluted foam. SIZES: Universal.

Soft Boot (Model 503160)

The Soft Boot, model 503160, is a heel protector designed to prevent pressure sores for people who are in bed for extended periods. Made of soft, plush, synthetic sheepskin, this boot secures with four Velcro straps and provides protection for the heel, the ankle, and the lower calf. This launderable boot has large vent holes to promote air circulation and reduce perspiration and moisture build up. SIZES: Universal.

Elbow Protector (Model 503310)

The Elbow Protector, model 503310, is designed to protect against friction burns and pressure sores. Made from soft, synthetic sheepskin, the launderable protector extends above and below the elbow and is held in place by two Velcro closure straps. SIZES: Universal.

Leg Separator Pad (Models 503420, 503460, & 503480)

The Leg Separator Pad is a leg positioner designed to provent skin irritation due to leg scissoring, rubbing, and moisture for people with lower extremity disabilities. These launderable pads are made of synthetic sheepskin and are held in place with Velcro closure straps. Model 503420 is a thigh pad, model 503460 is a knee pad, and model 503480 is a full-leg pad. DIMENSIONS: The thigh pad is 9 x 15 inches, the knee pad is 15 x 15 inches, and the full leg pad is 15 x 24 inches.

Synthetic Sheepskin Pads

Synthetic Sheepskin Pads are mattress pads designed to prevent pressure sores for people who are in bed for extended periods. These launderable pads are soft and permit air circulation beneath the user. DIMENSIONS: These pads are available in 30 x 24 inches, 30 x 40 inches, 30 x 60 inches, and on rolls of 30 x 360 inches.

Vinyl Bed Rail Pads (Series 4010 & 4011)

The Vinyl Bed Rail Pads are side rail pads designed to provide protection from injury from bed rails. These foam-padded, vinyl-covered pads cover the rails and extend below and between the rail and the mattress for added protection. Velcro closures secure the pads to the rails. These pads wipe clean. DIMENSIONS (HxTxL): Available in 15 x 1 x 60 inches, 15 x 1 x 72 inches, 15 x 1 x 80 inches, 15 x 2 x 60 inches, 15 x 2 x 72 inches, or 15 x 2 x 80 inches.

Cushion-Top Vinyl Bed Rail Pads (Models 401210, 401220, & 401230)

The Cushion-Top Vinyl Bed Rail Pads are side rail pads designed to provide protection from injury from bed rails. These foam-padded, vinyl-covered pads cover the rails and extend below and between the rail and the mattress for added protection. Added cushioning is provided on the top and inside of the rails. Velcro closures secure the pads to the rails. These pads wipe clean. DIMENSIONS: Model 401210 is 60 inches long, model 401220 is 72 inches long, and model 401230 is 80 inches long.

Thru-View Vinyl Bed Rail Pads (Models 401015 & 401045)

The Thru-View Vinyl Bed Rail Pads are side rail pads designed to provide protection from injury from bed rails. These pads feature clear vinyl plastic windows to reduce the feeling of isolation.These foam-padded, vinyl-covered pads cover the rails and extend below and between the rail and the mattress for added protection. Velcro closures secure the pads to the rails. These pads wipe clean. DIMENSIONS: Model 401015 is 60 inches long and model 401045 is 72 inches long.

Walker Belt (Models 251011 & 251022)

The Walker Belt is a gait belt designed for use with individuals with mobility disabilities during ambulation training. This nylon belt has handles on each side and at the back to enable a therapist to provide assistance. This belt features a strong Delrin buckle. SIZES: Model 251011 is a small-medium to fit waists 28 to 34 inches and model 251022 is a medium-large to fit waists 35 to 44 inches. DIMENSIONS: Two inches wide.

Cushion Grip

The Cushion Grip is a hand cone designed for use by individuals who have had strokes or who have other disabilities that cause involuntary hand closure. Tapered to the natural contour of the hand, this cloth-covered grip is filled with resilient polyester pile. An elastic band secures the machine-launderable cone to the hand. This device provides mild hand exercise and prevents fingernails from digging into the palm of the hand.

Cone Grip

The Cone Grip is a hand cone designed for use by individuals who have had strokes or who have other disabilities that cause involuntary hand closure. Shaped to the natural contour of the hand, this cloth-covered grip has a firm surface to keep the hand open without stimulating contractures. An elastic band secures the cone to the hand. The cloth cover is removable and launderable.

Finger Contracture Cushion

The Finger Contracture Cushion is a hand positioner designed to prevent finger contacture for individuals who have had strokes or other neurological disabilities. This soft, resilient anticontracture aid separates the fingers and keeps the hand open. This cushioned aid features an elastic band to secure it to the hand and it is covered in perspiration-absorbing fabric.

Slip-Grip Nonslip Matting (Models 909250, 909251, & 909252)

The Slip-Grip Nonslip matting is designed to prevent cushions from sliding off wheelchairs or plates and glasses from sliding on trays. The mat can be cut to size and used used between the wheelchair seat and the cushion, used on tables or trays to keep plates and cups steady, or to hold craft items or tools in place. DIMENSIONS: Rolls of 12 x 120 inches. COLOR: Model 909250 is blue, model 909251 is green, and model 909252 is raspberry.

Catheter Leg Strap

The Catheter Leg Strap is a catheter strap designed to reduce accidental dislocation of catheters. The cloth-backed foam band wraps around the wearer's leg, holding the catheter tube in place using a Velcro tab. DIMENSIONS: 30 inches long.

Smoker's Apron (Model 906010)

The Smoker's Apron, model 906010, is a fireproof apron designed to protect individuals with upper extremity or cognitive disabilities from burns or accidental fires due to smoking. This full-sized, lightweight apron covers the wearer's lap and chest and is designed to prevent smoking materials from falling between the chair or wheelchair and the wearer. SIZES: Universal.

Shower / Toilet Safety Belt (Model 909110)

The Shower/Toilet Safety Belt, model 909110, is a belt restraint designed to prevent individuals with mobility or balance disabilities from sliding while on the toilet, commode, or shower chair. This belt attaches to shower or bath seats and commode or toilet safety frames without tools and has a buckle closure. The belt is manufactured without metal or natural fibers and will not rust or mildew. SIZES: Universal.

Trach Tube Holder (Model 904110)

The Trach Tube Holder, model 904110, is a tracheostomy tube holder designed to secure tracheostomy tubes in position. This nonallergenic, adjustable foam collar holds the trach tube flange in place with Velcro fasteners. SIZES: Universal.

Trach Tube Ties (Models 904150 & 904151)

The Trach Tube Ties are tracheostomy tube holders designed to secure tracheostomy tubes in position. These non-irritating adjustable foam collars hold the trach tube flange in place with Velcro fasteners. SIZES: Model 904150 is small-medium and fits neck from 8 to 18 inches in diameter and model 904151 is a medium-large and fits necks 16 to 23 inches in diameter.

Bi-Level Footrest Extender (Series 7033)

The Bi-Level Footrest Extender is designed for use by people who use wheelchairs and who have leg-length discrepancy. The extenders can be selected in a right-left or left-right combination and they feature a vertical centerboard which prevents the feet from crossing over and a padded legrest to prevent the feet from slipping off the footrests. DIMENSIONS: The extenders are available in a choice of 16 or 18 inches wide and with 1- and two-inch pads, 1- and 3-inch pads, 1- and 4-inch pads, 2- and

Locator Alarm (Model 909210)

The Locator Alarm is a wandering patient system designed to enable caregivers to locate individuals who are prone to falls and have left their wheelchairs. This lightweight alarm is worn around the waist on a special belt that is not easily removable and is concealed in an attached protective pouch that is not easily accessible to persons with disabilities. The belt features a buckle that is concealed once it is secured. The alarm signal is decibel-controlled in order to make it auditory for sta

Wheelchair Leg Pad (Model 703070)

The Wheelchair Leg Pad, model 703070, is a legrest panel designed to prevent the user's legs from sliding off the footrests. These one-piece rigid-backed, vinyl-covered pads fit the entire width of the opening between the chair's legrests, preventing leg contact with metal wheelchair parts and providing comfort and cushioning when legrests are raised. These pads are designed for spray and wipe cleaning.

Thru-View Urinary Drainage Bag Holder (Model 102015)

The Thru-View Urinary Drainage Bag Holder, model 102015, is a catheter collection bag cover designed for use by individuals with urinary catheters who use wheelchairs. This bacteriostatic vinyl bag hangs below wheelchair seats and geri chairs or from bed rails with the attached Velcro straps and conceals the collection bag and stores tubing. A narrow clear vinyl window permits monitoring of the fluid level without removing the drainage bag. SIZES: One size accommodates all drainage bags.

Shower Poncho (Models 909120, 909130, 909140, & 909150)

The Shower Poncho is a men's or women's robe designed for use by individuals who use wheelchairs. Model 909120 features a short back; model 909130 has a long back; model 909140 has a long back and a hood; and model 909150 has a short back and a hood.

Skil-Care Ultra Wedge (Series 7541)

The Skil-Care Ultra Wedge is a foam or gel and foam seat cushion designed to provide a firm seating foundation and sliding control for people who use wheelchairs. Available in a foam model or in a foam and gel model for maximum pressure relief, these cushions have a fixed wedge shape that resists compression and straps that secure the cushion to the chair. The gel and foam model features a self-contained chamber of endothermic gel on top of foam for even weight distribution. The foam model comes

Pressure-Check Foam Cushion With Coccyx Cutout (Model 754525)

The Pressure-Check Foam Cushion with Coccyx Cutout, model 754525, is a foam seat cushion designed to relieve pressure on the coccygeal area for people who use wheelchairs. Pressure-Check foam has sections that adjust to the user for uniform pressure distribution. The cushion also features a firm contoured foundation to reduce sling-seat hammocking and spinal pressure. The spray-and-wipe clean nylon cover has straps to secure the cushion to the wheelchair. DIMENSIONS: 16 x 18 x 4 inches.

Alarm Cushion (Models 754410, 754420, & 754430)

The Alarm Cushion is a foam or gel and foam seat cushion designed for use with geri chairs. This cushion features a built-in weight sensor factory sealed inside a vinyl compartment in the cushion to protect it from urine and wear and to prevent it from shifting beneath the user's weight. When the user's weight is removed as they attempt to leave the chair or as a result of sliding, an alarm sounds.

Econo-Gel Pad (Models 751150, 751151, 751154, & 751155)

The Econo-Gel Pad is a single chamber gel flotation seat cushion designed for use in wheelchairs. This cushion combines heat-dissipating and pressure-reducing gel with a foam pad. All models are factory sealed in vinyl. Models 751150 and 751151 also include a launderable fabric cover. DIMENSIONS: Models 751150 and 751154 are 16 x 16 x 2 inches and models 751151 and 751155 are 16 x 18 x 2 inches.

Wheelchair Leveling Pad (Models 757010 & 757015)

The Wheelchair Leveling Pad is a solid seat insert designed for use in wheelchairs. This solid, closed-cell foam pad makes wheelchair sling seats flat and level with the seat frame. This pad can be used as a foundation for other cushions. Model 757010 does not have a cover and model 757015 includes a vinyl cover. DIMENSIONS: Both models are 16 x 18 inches.

Adjusta-Loop Cushion Belt (Model 301202)

The Adjusta-Loop Cushion Belt, model 301202, is a belt restraint designed to prevent individuals from leaving a wheelchair or sliding in the chair. This launderable foam-padded belt has securing loops that slip over the wheelchair kickspurs. Slider buckles adjust the webbing to fit the user. SIZES: Universal.

Econo-Belt (Model 701020)

The Econo-Belt, model 701020, is a belt restraint designed to prevent individuals from leaving or sliding in a wheelchair. This nylon belt attaches to the wheelchair kickspurs and slider buckles enable customized fit to the wearer. DIMENSIONS: Two inches wide.

Shoulder Strap Poncho (Models 302011, 302012, 302021, & 302022)

The Shoulder Strap Poncho is a vest restraint designed to prevent individuals who use wheelchairs from leaning forward or laterally. The poncho's shoulder straps secure to the wheelchair push handles and the waist straps secure to the kickspurs. Models 302011 and 302012 are made of poly weave and models 302021 and 302022 are made of CooLine Mesh. SIZES: Models 302011 and 302021 are small-medium and models 302012 and 302022 are medium-large.

Double Support Poncho (Models 302051, 302052, 302061, & 302062)

The Double Support Poncho is a vest restraint designed to prevent individuals who use wheelchairs from leaning forward or laterally. The poncho's shoulder straps secure to the wheelchair push handles and the waist straps secure to the kickspurs. A strap across the chest secures around the chair for additional support. Models 302051 and 302052 are made of poly weave and models 302061 and 302062 are made of CooLine Mesh. SIZES: Models 302051 and 302061 are small-medium and models 302052 and 302062

Shoulder Strap Vest (Models 302101, 302102, 302103, 302111, 302112 & 302113)

The Shoulder Strap Vest is a cross-over vest restraint designed to prevent individuals who use wheelchairs from leaning forward or laterally. The poncho's shoulder straps secure to the wheelchair push handles and the waist straps secure to the kickspurs. Models 302101, 302102, and 302103 are made of poly weave and models 302111, 302112, and 302113 are made of CooLine Mesh. SIZES: Models 302101 and 302111 are small, models 302102 and 302112 are medium, and models 302103 and 302113 are large.

Slider Poncho (Models 303011, 303012, 303021, & 303022)

The Slider Poncho is a vest restraint designed to prevent individuals who use wheelchairs from sliding, leaning forward, or leaning laterally. An attached foam-padded crotch piece prevents sliding. A chest strap provides posture support, and angled waist strap reduces pelvic tilt that contributes to sliding. The vest includes a removeable, launderable urine-proof crotch pad cover. Models 303011and 303012 are made of poly weave and models 303021 and 303022 are made of CooLine Mesh. SIZES: Models

Pelvic Holder (Models 303311, 303312, 303321, & 303322)

The Pelvic Holder is a pelvic restraint designed to prevent individuals who use wheelchairs from sliding, leaning forward, or leaning laterally. The tapered hour-glass design fits comfortably between the user's legs and a waist strap secures behind the wheelchair. Models 303311and 303312 are made of poly weave and models 303321 and 303322 are made of CooLine Mesh. SIZES: Models 303311 and 303321 are small-medium and models 303312 and 303322 are medium-large.

Cushion Slider Belt (Model 303210)

The Cushion Slider Belt, model 303210, is a belt restraint designed to prevent people who use wheelchairs from sliding. This foam-padded belt secures at the waist and includes a soft, padded crotch piece to help prevent sliding. A removable urine-proof crotch pad cover is included. SIZES: Universal.

Sleeved Jacket (Series 3042)

The Sleeved Jacket, Series 3042, is a jacket restraint designed to prevent individuals with cognitive or behavioral disabilities from leaving a wheelchair without assistance. This restraint features back zipper closure, short sleeves to make it more difficult for the wearer to remove the restraint, shoulder straps that secure to the wheelchair push handles to provide posture support, and a waist strap that secures behind the chair. This restraint is available in poly weave or CooLine Mesh. SIZES

Overlap Wheelchair Belt (Model 701040)

The Overlap Wheelchair Belt, model 701040, is a belt restraint designed to prevent people who use wheelchairs from sliding in the wheelchair. The size-adjustable nylon belt criss-crosses over the wearer's lap to reduce the pelvic tilt that contributes to sliding. DIMENSIONS: The belt is two inches wide.

Sleeved Jacket With Slider Control (Series 3043)

The Sleeved Jacket, Series 3043, is a jacket restraint designed to prevent individuals with cognitive or behavioral disabilities from leaving a wheelchair without assistance. This restraint features back zipper closure, short sleeves to make it more difficult for the wearer to remove the restraint, shoulder straps that secure to the wheelchair push handles to provide posture support, and a waist strap that secures behind the chair. A foam padded crotch piece prevents sliding and includes a remov

Houdini Safety Sleeper (Series 3050)

The Houdini Safety Sleeper, series 3050, is a body restraint designed to prevent individuals with cognitive or behavior disabilities from exiting the bed unattended. This sleeved zipper-back jacket restraint features a strap between the legs to prevent sliding down in the bed and a roll-about waist strap enables the wearer to sleep in any position. The straps secure under the bed. Models are available in poly weave or in CooLine Mesh. SIZES: Both the poly weave and CooLine Mesh styles are availa

Sleeper Jacket (Series 3051)

The Sleeper Jacket, Series 3051, is a jacket restraint designed to prevent individuals with cognitive or behavioral disabilities from leaving a bed without assistance. This restraint features short sleeves to make it more difficult for the wearer to remove the restraint and a waist strap that enables the wearer to sleep in any position and secures under the bed. This restraint is available in poly weave or CooLine Mesh. SIZES: Both the poly weave and CooLine Mesh models are available in small, m

Support Vest (Series 30231 & 30232)

The Support Vest, Series 30231 and 30232, is a vest restraint designed to prevent individuals with cognitive or behavioral disabilities from leaving a bed without assistance. This sleeveless restraint features a wide abdominal belt that secures under the bed and provides abdominal support. This restraint is available in poly weave or CooLine Mesh. SIZES: Both the poly weave and CooLine Mesh models are available in small, medium, large, and extra large.

Cushion Belt (Model 301200)

The Cushion Belt, model 301200, is a belt restraint designed to prevent individuals with cognitive and behavioral disabilities from leaving a bed without assistance. The foam padded belt enables the wearer to roll from side to side and the extra-long strap secures under the bed. SIZES: Universal.

Rigid Palm Padded Mitts (Model 306115)

The Rigid Palm Padded Mitts, model 306115, are restraint mitts designed to prevent individuals with cognitive or behavioral disabilities from injuring themselves or removing tubing. These padded mitts have rigid inserts to prevent the wearer from grabbing intravenous or nasogastric tubes. Separate finger channels spread and hold the wearer's fingers to control contracture. The launderable mitts have a mesh top to promote air circulation. SIZES: Universal. DIMENSIONS: Two inches thick.

Padded-Plus Mitts (Model 306120)

The Padded-Plus Mitts, model 306120, are restraint mitts designed to prevent individuals with cognitive or behavioral disabilities from injuring themselves or removing tubing. These padded mitts have easy-to-secure closures. The launderable mitts have a mesh top to promote air circulation. Separate tie straps to assist in restricting arm movements are included. SIZES: Universal. DIMENSIONS: Two inches thick.

Lift-Off Lap Cushion (Model 307050)

The Lift-off Lap Cushion, model 307050, is a lap tray designed to provide individuals who use wheelchairs with proper positioning and a work surface. This cushion is held in place with Velcro two closures that wrap around the front armrest posts and which are easily released by the act of rising from the chair; the closures also feature easy-to-grasp, easy-to-see loops which provide the user with the option of removing the cushion before rising. Covered in durable, liquid proof vinyl, the foam-p

Soft-Fall Bedside Mat (Model 911530)

The Soft-Fall Bedside Mat, model 911530, is a fall mat designed to protect individuals who are prone to falling out of bed or while entering or exiting the bed and/or who have osteoporosis. This thick, high-density foam pad is designed to be placed beside the bed and it is sized to slide under the bed between the wheels when not in use. Covered in vinyl, the pad wipes clean with a damp cloth and spray cleanser. DIMENSIONS (LxWxH): 68 x 36 x 4 inches.

Slide-Stopper Belt (Model 610320)

The Slide-Stopper Belt, model 610320, is a belt restraint designed to prevent wheelchair users from sliding down in the chair. Made of wipe-clean vinyl, this belt fastens across the thighs with Velcro to stabilize the hips and thighs. This belt secures to the chair using the chair's existing screws. SIZES: One size.

Reident-Release Slider Belt (Models 610310 & 610315)

The Resident-Release Slider Belt is a belt restraint designed to prevent wheelchair users from sliding down in the chair. Two nylon criss-cross the user's lap to prevent sliding forward. Model 610310 features standard Velcro closure and model 610315 features Velcro closure with a red hand loop. Both models secure to a wheelchair using the chair's existing screws. SIZES: One size.

Resident-Release Three-Point Wheelchair Belt (Models 610210 & 610215)

The Resident-Release Three-point Wheelchair Belt is a wheelchair seatbelt designed to provide security and positioning assistance. This automotive style-belt is a combination lap and shoulder belt that secures to the wheelchair using the existing screws. Model 610210 has side-release buckle closure and model 610215 has a user-friendly buckle. SIZES: One size fits most.

Resident-Release Bed Belt (Series 6104)

The Resident-Release Bed Belt is a belt restraint designed to remind individuals with cognitive disabilities who are at risk of falling that they require assistance getting out of bed. This belt is designed to enable the individual to sleep comfortably in any position while the belt is in use. The belt is available with a choice of standard Velcro closure or Velcro closure with a red hand loop. SIZES: Small-medium and medium-large.

Lateral Body Support (Series 7060)

The Lateral Body Support is a lateral trunk support designed for use by individuals who use wheelchairs or geri chairs. These vertical supports stabilize the torso to provide positioning support to reduce leaning to the left or right. The supports feature a built-in armrest trough. These supports are available with a choice of three covers: launderable synthetic sheepskin, launderable polyester, and spray-and-wipe clean nylon. DIMENSIONS: Available in a choice of 12.75 or 14 inches high.

Wheelchair Lumbar Support(Models 703065 & 703066)

The Wheelchair Lumbar Support is a lumbar support designed for use in wheelchairs. The foam core is covered in easy-clean vinyl. The attached straps hold the support securely in place. Model 703065 is a half-round and model 703066 is a full-round. SIZES: One size fits 16- and 18-inch chairs. DIMENSIONS: The half-round is 2.5 inches in diameter and the full-round is 5 inches in diameter.

Elevated-Arm Lateral Support (Models 706020 & 706021)

The Elevated-Arm Lateral Support is a combination lateral trunk support and elevating armrest designed for use by individuals who use wheelchairs or geri chairs. This support, which comes with a launderable synthetic sheepskin cover, helps reduce leaning to one side while permitting the arm to be elevated to control edema. Model 706020 is a right-handed model and model 706021 is a left-handed model. DIMENSIONS: Both models are 12.75 inches high at the lowest point.

Lateral Stabilizer Armrest Bolsters (Series 7061)

The Lateral Stabilizer Armrest Bolsters are lateral trunk supports designed for use by individuals who use wheelchairs. These bolsters fit over the wheelchair armrests to reduce lateral leaning and provide cushioned support for the arms. The bolsters come in a choice of three covers--launderable polyester, launderable synthetic sheepskin, and spray-and-wipe clean nylon--and are available in models for full- and desk-length armrests. DIMENSIONS: Available in a choice of 5 or 6 inches wide.

Arm Tray Lateral Stabilizer (Models 706140, 706141, & 706142)

The Arm Tray Lateral Stabilizer is a combination lateral trunk support and arm trough designed for use by individuals who use wheelchairs. This foam-padded stabilizer fits wheechairs with full-length arms and reduces lateral leaning while providing improved arm positioning. Model 706140 has a washable polyester cover, model 706141 has a washable synthetic sheepskin cover, and model 706142 has a spray-and-wipe clean nylon cover.

Mobile Arm Support (Series 7062)

The Mobile Arm Support, series 7062, is a hand orthosis and elbow support designed for use by individuals with upper extremity disabilities who use wheelchairs. Available in models for the right or left arm, and in a choice of level or elevated support, the units rests on the wheelchair arm and includes straps to maintain proper arm positioning. Covered in spray-and-wipe clean nylon, the removable arm trough is constructed of high-density foam for comfort.

Custom Thoracic Lumbar Sacral Orthosis

The Custom Thoracic Lumbar Sacral Orthosis is a spinal orthosis designed to promote an upright sitting posture for individuals who use wheelchairs. Custom manufactured to the dimensions of the user, this device is designed for individuals who cannot tolerate support under the axilla and provides anterior-posterior-lateral rotary contro and prevents trunk hyperextension. The system includes a choice of one of six cushions for specific seating needs.

Lateral Support Orthosis (Series 7022)

The Lateral Support Orthosis is a lateral trunk support designed for use by individuals who use wheelchairs. Designed to facilitate an erect sitting posture, this orthosis is made of contoured plastic foam, padded with foam for comfort, and covered with a durable spray-and-wipe clean cover. The orthosis accommodates all torso heights and the lateral support wings can be adjusted by adding foam to the wing pockets or by warming the plastic frame with a heat gun and adjusting the wings. The foam

Snug Supports (Models 706310 & 706311)

The Snug Supports are lateral trunk supports designed for use by individuals who use wheelchairs. These supports are placed inside the wheelchair to provide support and reduce lateral leaning. They also serve to reduce the interior space in the chair, adapting a standard chair for the needs of a smaller user. These supports feature a foam-padded plywood frame and a spray-and-wipe clean vinyl cover. Adjustable straps permit attachment to any wheelchair. Model 706310 is a pair of supports and mod

Wheelchair Side Wings (Models 706320 & 706322)

The Snug Supports are lateral trunk supports designed for use by individuals who use wheelchairs and lean bilaterally. These rigid-frame wings are padded with foam and covered in wipe-clean vinyl and attach to most wheelchairs, providing support at the shoulder level. Model 706320 is the Standard Support model. Model 706322 is the X-tra Support model which features integral armrest pads which fasten the bottom of the wings to the wheelchair armrest frame to provide additional support for larger

Drop-Stop Footrest Extender /legrest Pad(Series 7032)

Drop-Stop is a footrest extender designed to prevent foot drop in people who use wheelchairs. The modular extenders create a platform which enables footrests on footrests and geri chairs to be raised from one to four inches to provide improved positioning, sliding control, and weight distribution. The included padded legrest cushion prevents the user's feet from sliding off the footrests. DIMENSIONS: Available in 16- and 18-inch widths and in a choice of one, two, three, or four inches high.

Walker Bag Hook

The Walker Bag Hook is a carrying hook for a walker designed for use by individuals with mobility disabilities. This large plastic hook attaches to the walker with an adjustable clamp and carries a pocketbook or similar item, leaving the individual's hands free to use the walker. DIMENSIONS: The clamp adjusts to fit tubing from 0.5 to 1.125 inches in diameter.

Abduction Wedge (Model 703075)

The Abduction Wedge, model 703075, is a abductor designed for use by individuals who use wheelchairs. This high-density foam wedge controls abduction contracture caused by sitting with the knees together for long periods. This wedge features Velcro straps for secure positioning and a removable, washable fabric cover.

Gull Wing Knee Separator (Model 703077)

The Gull Wing Knee Separator, model 703077, is a knee separator designed for use by individuals who use wheelchairs. This durable plastic frame holds the knees in abduction and interior foam padding provides comfort. Velcro straps adjust for each leg and keep the device securely in position. The frame can be adjusted using a heat gun.

Gel-Foam Thin-Line Pad (Models 751040 & 751045)

The Gel-Foam Thin-Line Pad is a lightweight gel flotation seat cushion designed for use in wheelchairs. This cushion features a high-density foam base with a separate pressure-reducing gel pad on top. A removable, washable incontinence-proof polyester cover is included. The cushion is equipped with safety ties that permit it to be secures to the whelchair frame to prevent slipping. Model 751040 is a standard cushion and model 701045 has a firm foundation. DIMENSIONS: Model 751040 is 16 x 18 x 1.

Dispos-A-Cuff (Models 306040, 306041, 306048, & 306049)

Dispos-A-Cuff is a limb restraint designed to prevent individuals with cognitive or emotional dis abilities from injuring themselves or others. Model 306040 is foam with a single tie strap and model 306041 is foam with double tie straps. Model 306048 is synthetic sheepskin with a single tie strap and model 306049 is synthetic sheepskin with double tie straps.

Wheelchair Armrest Cushions (Models 703015, 703016, & 703130)

The Wheelchair Armrest Cushions are wheelchair armrest pads designed for use by individuals who use wheelchairs. These foam-padded nylon-covered pads attach to the armrests with Velcro fasteners and provide protection against pressure sores and comfort for sensitive arms and elbows. Model 703015 is designed for chairs with full-length arms and model 703016 is designed for chairs with desk-length arms. Model 703130 is an extended cushion that extends beyond the armrest and covers the armrest post

Cozy Seat (Models 703005 & 703006)

The Cozy Cushion is a combination foam seat and back cushion with attached armrest pads designed for use with wheelchairs. This one-piece unit is covered in soft brushed poly and padded with high-density foam and prevents skin contact with a wheelchair's vinyl upholstery and metal parts. Covering the seat, back, and armrests, the Cozy Cushion permits use of seatbelts and positioning belts. SIZES: Model 703005 fits 16-inch wide chairs and 703006 fits 18-inch chairs.

Split-Rail Vinyl Bed Rail Pads (Model 401080)

The Split-Rail Vinyl Bed Rail Pads are side rail pads designed to provide protection from injury from bed rails. These pads are designed for use on divided bed rails. These foam-padded, vinyl-covered pads cover the rails and extend below and between the rail and the mattress for added protection. Velcro closures secure the pads to the rails. These pads wipe clean. DIMENSIONS: 9 x 1 x 28 inches.

Tlc Turn-And-Lift Pad (Model 557001)

The TLC Turn-and-Lift Pad is a transfer aid designed to assist caregivers in turning and positioning individuals with physical disabilities in bed. This pad has a brushed tricot top layer, a middle layer of absorbent foam, and a bottom layer of urine-proof vinyl. Attached loops aid in turning and positioning. DIMENSIONS: 40 x 40 inches

Carex Enablers Safety Treads (Model En33Crd)

Carex Enablers Safety Treads, model EN33CRD, are designed to prevent slipping in tubs, showers, and on stairs. Sold in sets of eight, these waterproof treads are self-stick and can be installed on virtually any clean, dry surface. DIMENSIONS (LxW): 10 x 0.75 inches.

Rubbermaid Bathing Seat With Back Support

The Rubbermaid Bathing Seat with Back Support is a bath seat designed for use in most bathtubs by individuals with mobility disabilities. This one-piece molded seat features the Exact-Level System to permit custom height adjustment, large easy-grip handles in the seat and back, drainage perforations in the seat, and molded-in storage for a hand-held shower (not included) and soap. DIMENSIONS: The seat is 18 inches wide and the height adjusts from 17 to 22 inches. CAPACITY: 300 pounds. WEIGHT: 9.

Rubbermaid Portable Tub Transfer Seat

The Rubbermaid Portable Tub Transfer Seat is a transfer bench designed for use in most bathtubs by individuals with mobility disabilities. This one-piece molded bench rests on the sides of the tub and has rubber stops for secure placement and to protect the tub from scratches. The bench installs without tools and features a built-in sop dish with drain holes. DIMENSIONS: 14.25 x 31 inches. CAPACITY: 300 pounds. WEIGHT: 5 pounds.

Rubbermaid Transfer Bench

The Rubbermaid Transfer Bench is a transfer bench designed for use in showers and bathtubs by individuals with mobility disabilities. This height-adjustable bench has independently adjustable legs, allowing two legs to be inside the tub or shower and two to be outside, facilitating independent sliding transfers. The bench has a corrosion-resistant aluminum frame and side rail and a blow molded textured plastic seat and backrest. The seat is constructed in sections to create channels to accommoda

Rubbermaid Transfer Bench With Extra-Wide Seat

The Rubbermaid Transfer Bench with Extra-wide Seat is a transfer bench designed for use by individuals with mobility disabilities. This molded seat features the Exact-Level System to permit custom height adjustment, large easy-grip handles in the seat back, and molded-in storage for a hand-held shower (not included) and soap. DIMENSIONS (WxDxH): Overall dimensions are 35 x 20 x 22 inches; the height adjusts from 17 to 22 inches. CAPACITY: 300 pounds. WEIGHT: 19.3 pounds.

Shadow Qr

The Shadow QR is a manual, lightweight rigid frame racing wheelchair. FRAME: Available in 11 standard colors, 6 optional colors, and special effect or custom finishes, the frame is available in a range of widths from 12 to 20 inches. Custom modifications are also available. U-shaped anti-tip tubes are standard. SEAT: The seat rails on this chair extend 3.5 inches beyond the front of the upholstery. The seat depth ranges from 12 to 18 inches in one-inch increments. The rear seat height ranges fro

Shadow 3D & Shadow 3D Basketball

The Shadow 3D and the Shadow 3D Basketball are three-wheel manual, lightweight rigid frame sport wheelchairs. FRAME: T-frame in regular and short configurations. Available in 11 standard colors, 6 optional colors, and special effect or custom finishes, the frame is available in a range of widths from 13 to 20 inches. A choice of a right- or left-mounted transfer handle is standard; A transfer handle on both sides is optional. Anti-tip tubes are optional. SEAT: The seat width is .5-inch narrower

Shadow Mach 3 & Shadow Mach 3 / Ds

The Shadow Mach 3 is a hand propelled racing cycle wheelchair for adults.. FRAME: Available in 11 standard colors, 6 optional colors, and special effect or custom finishes. SEAT: The seat is available in a choice of widths from 13 to 20 inches in one-inch increments. Custom seat frame modifications are available. A choice of a standard backrest which adjusts from 19 to 22 inches high or a short backrest which adjusts from 16 to 19 inches is offered. CUSHION: A choice of a 2-inch cushion or a 2-i

Shower Chair (Models Sc-200-Va, Gr & Tp, Scc-250-Va, Gr & Tp)

Caster shower chairs with or without commode. Furniture grade PVC tubular frame. Lightweight. Rust and corrosion free. Plastic toilet seat, mesh fabric backrest. Impervious to stains and most chemicals. Four 3-inch casters. Optional twin wheeled deluxe casters. Vanilla, gray or taupe with matching striped fabric.

Economy Shower Chair & Economy Shower Chair Commode

Caster shower chairs with or without commode. Furniture grade PVC tubular frame. Lightweight. Rust and corrosion free. Plastic toilet seat, mesh fabric backrest. Impervious to stains and most chemicals. Open design for thorough washing. Full length armrests. Four 3-inch casters, 2 with locks. 2 sizes: 37 inches high by 21 inches wide by 19 1/2 inches deep, 17 inch seat to floor height; 40 inches high by 21 inches wide by 19 1/2 inches deep, 20 inch seat to floor height. 16 pounds. Maximum load c

Adaptor Air Spring Padding

Adjustable pre-inflated air cushioning interface for use on any surface to enhance soft tissue protection and provide shock absorption. Self contained sealed air cells may be cut apart in sections to fit flat or contoured surfaces where shock, impact absorption, shear or friction protection is required. Flame resistant. Neoprene rubber. Washable with soap and water. 10 by 14 inch sections with grid of 70 one inch square cells. .

Fitness Is For Everyone.

Video exercise tapes for the physically impaired. Each 30 minute aerobic dance routine program includes a warmup period, activity period, and cool down period. Choose from sets or individual selections: Aerobics for paraplegia, quadriplegia, cerebral palsy, amputees; Strength and flexibility exercises for all types of disabilities; Aerobics for paraplegia and quadriplegia; Aerobics for Cerebral Palsy and amputees; Aerobics for paraplegia; Aerobics for quadriplegia; Aerobics for amputees; or Aero

Richards Ankle Support.

Ankle support. Figure 8 design, crosses over front of ankle. 3 inch wide elastic with velcro closure. Washable. Fits left or right side. Small 18 inches, medium 20 inches, large 22 inches and extra large 24 inches.

Pouch Arm Sling (Models 902011 & 902012 )

The Pouch Arm Sling is designed for use by individuals with upper extremity injuries or disabilities. This durable, machine washable sling extends from the middle of the hand and wraps around the elbow to provide even weight distribution for either arm. The adjustable shoulder strap features a non-slip buckle. SIZES: Model 902011 is small/medium and model 902012 is medium/large.

Gel-Foam Pad (Models 751010, 751011, & 751012)

The Gel-Foam Pad is a gel flotation seat cushion designed for use in wheelchairs. This cushion features a high-density foam base with a separate pressure-reducing gel pad on top. A removable, washable incontinence-proof polyester cover is included. The cushion is equipped with safety ties that permit it to be secures to the whelchair frame to prevent slipping. DIMENSIONS: Model 751010 is 16 x 16 x 2.5 inches; model 751011 is 16 x 18 x 2.5 inches; model 751012 is 16 x 20 x 2.5 inches.

Modesty Apron (Model 707030)

The Modesty Apron is a lap robe designed for use by women who use wheelchairs. Made of durable wash-and-wear material, this large wheelchair apron extends below the knee and has a large front pouch pocket and a waist belt that secures behind wheelchair. SIZES: One size fits most.

Convoluted Wheelchair Cushions (Series 755)

The Convoluted Foam Cushions, series 755, are foam seat cushions designed to provide pressure relief for individuals who use wheelchairs. The eggcrate-style foam cushions are available without a cover or with a choice of a polyester fabric or synthetic sheepskin cover. DIMENSIONS: The cushions are offered in 16 x 18 x 3 inches or 16 x 18 x 4 inches.

Triple-Ply Heel Pad (Model 503010)

The Triple-Ply Heel Pad, model 503010, is a heelprotector designed to prevent pressure sores. Made of triple-ply synthetic sheepskin, this laundrable protector cups the heel and features side vent holes to promote air flow and reduce moisture build-up. An anle strap with Velcro closure ensures a secure fit.

Synthetic Sheepskin Bed Rail Pads (Model 402010)

The Synthetic Sheepskin Bed Rail Pads, model 402010, are side rail pads designed for use with hospital bed rails. Made of health-care grade, high-pile synthetic sheepskin, these pads cover the sides and top of the rails. The launderable, hypo-alergenic pads secure at the top with heavy-duty snaps and at the bottom with ties. DIMENSIONS: 18 x 60.

Roll Belt (Model 301300)

The Roll Belt, model 301300, is a belt restraint designed to enable individuals with cognitive disabilities to change position in bed while preventing them from leaving the bed. This laundrable belt features extra-long straps that secure ubder the bed. SIZE: One size fits most.

Safety Ponchos (Series 3000)

Safety Ponchos, series 3000, are vest restraints designed to prevent individuals with cognitive disabilities or who are in danger of falling from leaving a wheelchair independently. Available in CooLine mesh or poly weave fabrics, these ponchos feature deep square necklines, are pulled on over the head, and secure at the waist behind the wheelchair. SIZES: Small/medium and medium/large.

Cushion Belt (Models 301200 & 301201)

The Cushion Belt is a belt restraint designed for use with wheelchairs and geri chairs. This foam-padded belt is launderable. Model 301200 secures behind the chair with ties and can also be used in bed. Model 301201 secures behind the chair with an easy-release buckle and cannot be used in bed. SIZE: Both models are one size fits most.

Safety Vest (3000 Series)

The Safety Vest, series 4000, is a vest restraint designed for use with wheelchairs and geri chairs. Available in a choice of Cooline mesh or poly weave fabric, the vest croses over the chest, features a deep V neckline, and secures at the waist behind the chair with ties. SIZES: Small, medium, or large.

Padded Mitt (Model 306110)

The Padded Mitt, model 306110, is a hand mitt designed to prevent individuals with cognitive or emotional disabilities from scratching, hitting, or otherwise injuring themselves. These lightweight padded mitts have Cooline mesh covers, easy closure, and may be used with or without the included with arm restraint straps. SIZES: One size. DIMENSIONS: .75 inch thick.

Unipoise Cane Brite (Models 5355, 5357, 5356, & 5358)

Push button adjustable height aluminum cane with offset shaft. Contour molded handgrip. Rubber safety tip. Locking silencer for rattle free use. Models 5355, 5356 height adjusts 31 to 40 inches. Models 5357, 5358 height adjusts 24 to 33 inches.

Wooden Safe-T-Canes (Models 5390 & 5400)

Wooden straight canes. Domestic, american, T-handle, imported standard, imported slimline, special brass knob and special brass knob sectional models available.

Platform Crutch Attachment For Crutches (Model 7706)

Naugahyde padded horizontal platform to fit any aluminum axillary crutch. Angle of platform tilt adjusts 20 degrees up or down from horizontal. Vertical handgrip adjusts for distance from front of platform. Platform height adjustable. Velcro closure over forearm.

Quadripoise Narrow Base Adult (Model 5345) & Quadripoise Narrow Base Youth (Model 5346)

Pushbutton height adjustable cane with four legs and low center of gravity. Center shaft placed through reinforcing base plate with legs at right angle to shaft. Shaft is offset so cane can be held close to body. Contoured grip and rubber safety tips. Locknut silencer. Rattle free. Base 5 by 7 inches adult height 29 to 38 inches. Youth height 23 to 32 inches.

Quadripoise Wide Base Adult (Model 5340) & Quadripoise Wide Base Youth (Model 5341)

Pushbutton height adjustable cane with four legs and low center of gravity. Center shaft placed through base plate with legs at right angle to shaft. Shaft is offset so cane can be held close to body. Contoured grip and rubber safety tips. Locknut silencer, rattle free. Base 7 by 11 inches, weight 2 pounds. Adult height 29 to 38 inches. Youth height 23 to 32 inches.

Complete Platform Guide-Line Crutches (Models 676066 & 676076)

Aluminum auxillary crutch with Naugahyde padded platform attachment for forearm weightbearing. Platform attaches with screws and wing nuts and is completely adjustable from axilla to forearm height. Angle of platform tilt adjusts 20 degrees up or down from horizontal. Vertical handgrip adjusts for extension and rotation. Velcro closure over forearm. Tall adult 46 to 60 inches high, adult (model 676066) 45 to 55 inches high, youth (model 676076) 38 to 46 inches high.

Guide-Line Safe T Crutch (Models 67601, 67602, & 67603)

Height adjustable aluminum crutch with molded plastic arm rest and adjustable plastic handgrip. Tall Adult/Adult (model 67601) 46 to 60 inches. Youth (model 67602) 38 to 47 inches. Child (model 67603) 29 to 38 inches.

Folding Red Dot Safe T Walker (Models 7756 & 7755)

Pushbutton height adjustable four legged frame. Vinyl handgrips and rubber safety tip. Unit folds to 3 3/4 inches for storage by depressing release tab with finger or side of hand. No low cross members. Weight 5 3/4 pounds. Base 16 to 23 inches. Adult (model 7755) height 32 to 36 inches. Youth (model 7756) height 29 to 33 inches.

Commode Shower Chair

Shower or commode chair made of PVC tubing which will not rust, stain, or corrode. Flame resistant fabric on back. Full length arms. Maximum capacity 300 pounds. Features removable drop pail, fold up footrest and optional swingaway arm for transfers. Four dual wheel casters. Removable padded standard seat. Height: overall 38 inches, seat height 20 inches. Depth 28 inches. 12 quart pail. Weight 32 pounds. .

Original Shower Chair (Models Sc100 & Sc-200) & Oversize Shower Chair (Model Sc-200-Os)

Shower chair made of PVC tubing. Non-absorbent fabric upholstery in backrest. Elongated plastic toilet seat. Hand grip. Optional swingaway arm and fold up footrest. Eight colors available. All models have four casters. Model SC-100: overall height 37 inches, seat height 17 inches, depth 19 1/2 inches, and width 21 inches, maximum capacity 300 pounds. Model SC-200: overall height 40 inches, seat height 20 inches, depth 19 1/2 inches, width 21 inches, maximum capacity 300 pounds. Model 200-OS: ove

Quickie Ts

The Quickie TS is a manual tilt-in-space wheelchair designed for use by individuals who need to change position without leaving the wheelchair. FRAME: The frame is available in regular and long configurations, and frame widths range from 14 to 20 inches in 1-inch increments. Rear anti-tip tubes are standard; front anti-tip tubes are optional. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in 15- to 17-inch depths, in 1-inch increments on th

Quickie Recliner

The Quickie Recliner is an adult or child manual drive wheelchair with reclining backrest. FRAME: Folding aluminum frame available in 11 standard and 3 custom colors. Frame widths available in 14 to 20 inches in 1-inch increments. The chair is 12.5 inches wide folded. The frame is available in kids, regular, and long configurations. Anti-tip tubes are included. SEAT: The reclining back is 24 inches high, includes a 10-inch headrest extension, and has infinite positioning capability within a 70-d

Clinic Model Wide Base (Model 6827)

Wide based adjustable height four legged cane with straight shaft shovel type handle. Rubber safety tips. Base is 9 by 12 inches. Height adjustment is a double locking clamp. Adjustable height from 30 to 39 inches.

Atrac-Tain

Atrac-Tain is a skin care product designed to help promote healthier skin for people who are incontinent or who use catheters or who have skinn disorders such as xerosis. Available in a 5-ounce tube of cream ($10.25) or an 8-ounce bottle of lotion, Atrac-Tain is formulated with skin-nourishing Urea and lactic acid.

Woun'dres Collagen Hydrogel

Woun'Dres Collagen Hydrogel is a wound care product designed to provide a moist environment to promote wound healing following surgery or pressure sores. In addition to maintaining the moist environment, the collagen hydrogel dressing absorbs excess drainage and provides a natural debridement process. This product is available in 1-ounce or 3-ounce tubes.

Food Prep Board (Model 3023)

The Food Prep Board, model 3023, is a cutting board and buttering aid designed for use by persons with upper extremity disabilities. The board anchors to the counter with a curved lip that fits over the counter edge and non-skid feet keep it from slipping. The board also features a patterned surface to keep food from sliding and raised back edges to brace bread for one-handed buttering or sandwich making and to keep food from slipping off during cutting or chopping. DIMENSIONS: 8.75 inches squar

Walker / Wheelchair Bag

The Walker/Wheelchair Bag is a carrying bag for a walker or a wheelchair back pouch designed to enable persons with mobility disabilities to transport personal items. Made of plastic-coated nylon with cotton binding, the bag features two reinforced pockets and attaches to the walker or wheelchair using hook-and-loop fasteners. The bag is mildew and fungus resistant and can be machine washed and dried. DIMENSIONS (LxH): 22 x 10 inches. COLOR: White.

Round Scoop Dish (Model 1544)

The Round Scoop Dish, model 1544, is designed to assist people with upper extremity disabilities in getting food on to utensils. Made of extra-thick melamine plastic, the dish features a heavy-duty, reinforced rim and a non-skid base. A groove in the front lip may be used to rest utensils or as a location notch for individuals who are blind or have low vision. This dish is dishwasher safe up to 180 degrees. The dish contains no BPA, phthalates or latex. DIMENSIONS: The dish is 9 inches in diamet

Eliminator & Eliminator X

The Top End Eliminator and the Eliminator X are racing wheelchairs that are designed with aerodynamic frames and lower center of gravity for athletic individuals who use a wheelchair and wish to compete. Each bike comes standard with a helmet and tool kit. FRAME: The frame is made of custom 6061 T6 Aluminum T-frame. There are three cage designs: V, open-V, ar I-cage. The Eliminator X has a one-sided triagular fork. Overall length measures 56 to 66 inches in two inch increments. STEERING: Custom

Red Dot Walker With 5 Inch Swivel Wheels

Folding adjustable wheeled walker for uneven surfaces. Aluminum frame. 2 front swivel casters with 5 inch rubber tires. Glide brakes. Dual fold mechanism. Soft foam handgrips. For adolescents or adults with heights 5 foot 4 inches to 6 foot 2 inches. Adjustable height from 34 to 38 inches. Base width 23 inches. Base depth open 16 inches. Base depth folded 3 3/4 inches. Inside grip width 16 1/4 inches. Weight 9 pounds.

Red Dot Walker With Seat

Adjustable folding walker with fold down seat. Contoured seat flips up and locks in place. seat width 17 1/2 inches, seat depth 10 inches, base width 23 inches, base depth open 16 inches, base depth folded 8 3/ 4 inches. Weight 8 3/4 pounds. Adult size: for user's height 5 feet 4 inches to 6 feet 2 inches, adjustable height 32 to 36 inches. Youth size: user's height 4 feet 7 inches to 5 feet 5 inches, adjustable height 29 to 33 inches. Usable with two rear rubber tips or glide brakes. CAPACITY:

Prestige Pediatric Forearm Crutches

Adjustable forearm crutches for children. Standard forearm crutches in bright metallic, royal blue or princess pink. Youth: users height 4 feet 2 inches to 5 feet 2 inches, adjustable height handle 25 to 31 inches, cuff to handle 8 1/2 to 10 inches, weight 4 pounds. Child: for user's height 3 feet 2 inches to 4 feet 8 inches, adjustable height handle 19 to 27 inches, cuff to handle 7 1/2 to 8 1/2 inches, weight 2 pounds. Toddler: user's height 2 feet 10 inches to 4 feet 4 inches, adjustable heig

Prestige Quadri Poise Canes

Adjustable quad cane. Aluminum type with steel base unit. Center column and legs reinforced. T-lock silencer for rattle prevention. Offset handle with soft foam handgrip. Left or right handed use. Pewter grey or tawny bronze. For user's with heights 4 feet 10 inches to 6 feet 4 inches. Adjustable height 29 to 38 inches. Wide base 7 by 11 inches, weight 2 pounds. Narrow base 5 by 7 inches, weight 1 3/4 pounds.

Tub Grab Bar (Model K10365)

The Tub Grab Bar, Model K10365, is a safety device for entering or exiting a bathtub designed for persons with physical disabilities or balance problems. The vertical, white plastic curved grab bar attaches to the side of the bathtub and can be gripped at a high-level when entering the tub and at a lower level grab bar when exiting. The finish is textured to prevent slippage and rubber lined pads at the bar's base prevent scratches to the tub. Installation requires no tools and the height can ea

Clear Plastic Tray

The Clear Plastic Tray is a tray for a walker designed to carry small items inside a walker basket. Made of molded plastic, the tray consists of three separate compartments specially designed to hold books, glasses, coins, medications, and a drinking glass, can or cup. DIMENSIONS: The largest compartment in the tray measures 8.5 inches x 3.75 inches x 2 3/8 inches deep (22 x 9 x 6 centimeters).

Rolyan Abduction Pillow (Models A5131, A5132, 619701 & 619801)

The Abduction Pillows are leg positioners designed for use by individuals with severe physical disabilities or with lower extremity disabilities. Designed to provide hip abduction, the units are made of soft foam or vinyl-coated fosm with two straps. SIZES: Small and large. DIMENSIONS (LxW): Model A5131 is 13 x 14 inches x 6 inches thick. Model A5132 is 16 x 18 inches x 6 inches thick. Model 619701 is 6.5 x 13 inches thick. Model 619801 is 8 x 16 inches thick. COLOR: Blue.

Composite Shower Stool & Chair

The Composite Shower Stool & Chairs, Models K11115 & K11116, are shower seats for persons with physical disabilities who are unable to stand beneath a shower flow. The lightweight, plastic stool and chair is textured for secure seating. A backrest on the chair provides additional support. Both are designed to fit inside any standard size tub or shower. OPTIONS: Footpiece extensions can be ordered separately to adjust chair or seat height from 18.5 inches to 20.5 inches. DIMENSIONS: Seats

Guardian Hand Held Shower With Ergonomic Handle (Model 98035)

The Guardian Hand Held Shower with Ergonomic Handle, model 98035, is designed for use by individuals with physical disabilities who require a flexible shower hose to direct the spray while either standing or sitting. This hand-held unit has an extra long hose and an ergonomic handle with a textured surface. The unit provides a choice of standard or pulsating sprays. It installs on existing 1/2-inch shower arm, and comes with a mounting bracket to allow for fixed usage as well as hand held operat

Richards Knee Support.

Knee support, all elastic with flexible metal and lateral stays, velcro closure. Open patella. Washable. Fits right or left leg. Small 8 by 12 inches, medium 9 by 15 inches, large 10 by 18 inches and extra large 10 by 20 inches.

Knee Immobilizer.

Knee immobilizer with 3 contoured posterior stays, lateral stay and 1 medial stay except on small size. Alternating loop lock velcro closures. Dandy Lion Immobilizer model made of felt with denim fabric and heavy duty stays. Dandy Lion Dressing Model made of felt and denim fabric and all stays are lightweight spring steel. richards Immobilizer Model made of felt with duck fabric and heavy duty stays. Washable. Fits left or right leg. Available in 16 or 22 inch lengths for thigh measurement sizes

Clavicle Strap.

Clavicle strap for clavicular immobilization. Figure 8 design with webbing straps, foam padded triangular rear buckle. Straps are double padded around shoulder and axilla with foam and felt. Richards heavy model has velcro closures. Improved Heavy Model has extra pressure sensitive area to permit wide range of adjustments. Available in sizes extra extra small 20 by 2 inches, extra small 24 by 2 1/2 inches, small 31 by 2 1/2 inches, medium 36 by 3 1/2 inches and large 40 by 4 inches.

Arm Sling.

Arm slings, cotton denim with adjustable length shoulder strap with velcro closure. Dandy Lion Comfort Model has single shoulder strap. Economy model also has single shoulder strap. Dandy Lion Velpeau Sling and Immobilizer maintains arm in velpeau position with steady close to body support and additional adjustable waist strap with velcro closure. Small 12 by 4 inches, medium 15 by 6 inches, and large 17 by 7 inches.

Richards Shoulder Immobilizer.

Shoulder immobilizer, straps around body, lower arm, and forearm. Made of 6 inch wide elastic with velcro closures. womens style is contoured below bust. Sized by chest measurement. Available in range of womens and mens sizes.

Richards Clavicle Strap.

Clavicle strap for clavicular immobilization. Figure 8 design made of needle punched foam covered with stockinette. cotton webbing straps, rear foam padded triangle buckle, and pressure sensitive closures. Washable. Range of sizes.

Richards Economy Sling.

Arm sling, deep pocket design made of linen color fabric with adjustable length shoulder webbing strap with slide buckle. Small 13 by 7 inches, medium 16 by 8 inches, large 19 by 9 inches.

Richards Arm Sling.

Arm sling, open front design and thumb strap to prevent arm migration. Breathable, washable fabric with one 1 1/2 inch wide adjustable shoulder strap with slide buckle and velcro closure. Small 4 by 12 inches, medium 6 by 15 inches, large 7 by 17 inches and extra large 9 by 19 inches.

Richards Cervical Collar.

Cervical collar for conservative treatment of minor neck injuries. Stockinette covered polyfoam with velcro closure. Washable. Available with medium or firm density foam, in regular or low contour, in range of widths and neck measurement sizes. Extension piece available.

Quickie Z-500

The Quickie Z-500 is a pediatric powered tilt-in-space wheelchair designed for use by children who need to change position without transferring from the wheelchair. A non-tilt option is also available. FRAME: Frame widths range from 12 to 16 inches in 1-inch increments. The rigid frame is available in 11 standard colors and 3 custom colors and includes a growth kit. CONTROLS: A programmable controller and remote joystick with a choice of right or left mounting is standard. A heavy-duty remote a

Coated Steel Commode (Models 6456, 6457, 6476, & 6477)

Adjustable height commode. Height adjusts in one inch increments. Overall height 24 1/2 inches to 29 1/2 inches. Adjustable seat height 17 1/2 to 21 1/2 inches. Seat angle is adjustable by raising or lowering support frame for commode seat. Width between arms 17 1/2 inches. Support bar across back adds stability to frame. Bacterial resistant coating is warm to the touch. Plastic seat and lid. Frame has non-skid, non-marring rubber tips, and silencing collars to minimize rattles. Weight 12 pounds

Transfer Bench (Models 990-1 & 990-3)

Transfer bench. Three molded seat sections with full back rest for added patient safety. Back rest can be for left or right access. Anodized aluminum frame. Seat is 16 inches deep by 29 1/2 inches long. Adjustable seat height 15 to 19 inches in one inch increments. Overall height 31 to 35 inches.

Caster Shower Chair & Commode (Models Sc100, Sc200, Cc201Wl, Cc-201, & Scc250)

Shower Chairs constructed of tubular PVC frames. 3 inch locking casters. Polyester mesh weave backrests. Eight colors. Plastic seats. Dimensions: 19 1/2 inches deep by 21 inches wide by 37 inches high; or 19 1/2 inches deep by 21 inches wide by 40 inches high. Both weigh 18 pounds. 300 pound maximum weight capacity. Available with regular or commode seat. Options: swingaway arms and footrests.

Shower / Bath Chair With Backrest (Model 1369)

Aluminum bath chair. Molded plastic seat has drain holes to keep water in the tub. Handles on each side. Non-slip textured finish with contoured seat and back. Flared legs. Non-slip rubber tips. Back height 13 inches. Weight 8 pounds. Fits inside standard tub.

Mobile Shower Chair (Model 6358)

Caster shower chair assists with transport as well as shower functions. Five inch swivel casters for maneuverability, with wheel locks on rear casters. Nylon fabric backrest. Toilet seat and commode pail standard equipment. Aluminum tubing frame. Footrest. Optional Ensolite padded seat. Molded plastic full-length armrests. Fits over most toilets.

Dr Joseph's Original Footbrush

Long handled footbrush with sponge and brush. Contoured 25 inch handle with wrist strap. Lightweight, unbreakable polymer plastic handle. Removable sponge tip for between toe cleaning.

Safe-T-Pole (Model 98120)

Floor to ceiling pole of heavy gauge steel, 1 1/2 inches in diameter. White. Mounts anywhere, no tools required for installation. Assist standing, sitting, climbing stairs or transferring. Adjustable height 7 feet 8 1/4 inches to 8 feet, 2 1/2 inches. Weight 14 pounds.

Cant-I-Levered Pushbutton Drop Arm (Model 98202)

Fixed height commode. Cantilevered design allows unrestricted left-to- right leg movement for easy transfer. Rust resistent, chrome plated steel frame with foam hand grips. Arm folds down by pushing spring button on front of frame. Open frame design allows for over the toilet use. Removable backrest. Pail, lid, and splash shield standard. Overall width 22 inches. Depth 22 to 24 inches. Adjustable height 31 to 36 inches. Adjustable seat height 18 1/2 to 23 1/2 inches. Seat width 15 inches. Arms 8

Cant-I-Levered Deluxe Pushbutton Drop Arm With Padded Back And Seat (Model 98204)

Fixed height commode. Cantilevered design allows unrestricted left-to- right leg movement for easy transfer. Rust resistent, chrome plated steel frame with padded back and seat, has foam hand grips. Arm folds down by pushing spring button on front of frame. Open frame design allows for over the toilet use. Removable backrest. Pail, lid, and splash shield standard. Overall width 22 inches. Depth 22 to 24 inches. Adjustable height 31 to 36 inches. Adjustable seat height 20 to 25 inches. Adjustable

Foam Cushion Wedge And Flipdown Hardware

Abductor pad available in 2 sizes: 3 1/2 inches wide by 3 inches high by 5 inches deep, and 2 inches wide by 3 inches high by 3 1/2 inches deep. Mounts to underside of solid seat with flipdown or slide-out hardware to allow transfers.

Wenzelite Pediatric Anterior Safety Roller (Models Pe Tyke, Pe 1000Bl, Pe 1000Wb/wbk, & Pe 1000 Xl)

The Wenzelite Pediatric Anterior Safety Roller model PE TYKE, PE 1000BL, PE 1000WB/WBK, and PE 1000XL is a folding height-adjustable wheeled walker designed for use by children with mobility disabilities. Designed for indoor and outdoor use, this walker provides maximum support and improved posture for children from early childhood through young adulthood. FRAME: Square steel or aluminum tubing with welded joints, handlebars, and a powder coat finish in a choice of colors. BRAKES: Adjustable b

Flip Abductor (Model Ab20)

The Flip Abductor (model AB20) is a knee separator designed for seating systems and wheelchairs. It is a lever release flip-down abductor with an adjustable height of 1 to 4 inches. An Abductor Pad (model AB50, $60) can be ordered separately. The Abductor is 3 inches by 5 inches by 3 inches, and comes in black only.

Butterfly Strap (Models Bb01, Bb02, Bb03, Bb11, Bb12, Bb13, Bh01, Bh02, Bh03, Bh11, Bh12, Bh13)

The Butterfly Strap is a padded chest panel with vinyl upholstery designed for providing trunk support for seated individuals. It is available in buckle (BB-) and velcro (BH-) styles in sizes small, medium and large. The strap is available in black and gray.

Footrest Platform Tops And Bottoms

Top and bottom sections allow mounting of one-piece footplates to aluminum pans or other rigid seat panels. Removeable. Fixed or adjustable knee and ankle angles. X-style foot straps.

Impala & Impala Kit

Mobility base for use with Contour-U and other one-piece seating systems. Tilt in space adjustment from 8 degrees forward to 32 degrees back, with gas cylinders for weight assist in three weight ranges. Available with 12 inch spoked, 20 inch mag, or 24 inch mag rear wheels, quick release axles, 5 inch or 8 inch front casters. Interfacing hardware for aluminum pans included. Width adjustable to accommodate seating systems from 14 to 18 inches. Accommodates 14 to 21 inches seat depth. Supports up

Shadow Racer

The Shadow Racer is a manual, rigid frame, racing wheelchair. FRAME: T-tube chrome moly or T-tube aluminum with 3 or 4 wheel design, custom built. Frame lengths of 33, 35, 37, 39, 41, and 43 inches are available. SEAT: Seat width 11 to 17 inches. Seat depth and back height fit to user. WHEELS: Quick-release 20, 24, and 26 inch rear wheels with tubular tires with 12 degrees camber. 16, 18 and 20 inch front wheels with tubular tires. BRAKES: Handbrake standard. OPTIONS: Cateye Vectra computer is s

Showersafe Waterproof Cast & Bandage Cover

The ShowerSafe Waterproof Cast & Bandage Cover is a cast protector made of a durable, reusable and pliable plastic designed to protect casts, wounds, and bandages dry during showering or bathing. Nine different models are available for the Arm, Leg, Elbow/Knee, and Foot/Ankle. SIZES: Arm and leg models come in Small, Medium, and Large. Elbow/Knee model comes in Small and Large. One size fits all for the Foot/Ankle model.

Erick

Steel frame stroller with 7/8 inch tubing. 8 inch rear wheels with locks, and double 6 inch swivel front casters. Interchangeable firm back/seat with 10, 11 1/2, and 12 1/2 inch width seats, with depths ranging from 10 to 14 1/2 inches. Height adjustable foot plate, fire retardant quilted cover, lap belt standard. Red. Accessories available for positioning.

Redi-Temp Liquid Crystal Temperature Monitor (Models 5010-H & 8001)

The Redi-Temp Liquid Crystal Temperature Monitor is a digital thermometer that can be applied to skin on the forehead, temple, behind the ear, or over the heart. It has no glass or mercury and can remain in place for several days with no discomfort or side effects. Temperatures are displayed in large bright green characters on a liquid crystal display. The thermometer is available in strips (model 8001) or in an oval shape (model 5010-H) that optimizes contact with blood vessels in the forehead.

Shadow One & Shadow Dt

The Shadow One and Shadow DT are manual sport wheelchairs. FRAME: Chrome-moly Shadow One 72-degree frame or Shadow One DT 72- or 85-degree frame. The frames are available in 11 standard colors, 6 optional colors, and custom or special effect finishes. The frames are offered for sports/daily use in standard, large standard, small standard and for sports use in steep, tall, and ultra-tall. Custom modifications are available. Anti-tips with wheels are optional. SEAT: Seat widths range from 12 to 20

Surgilift

Stretcher with lifting mechanism. Special sheets with six attached straps are placed under person to be lifted. Straps are buckled to frame of Surgilift and frame is lifted to desired height. U shaped base, 4 casters with locks.

Posterior Elbow Support

Posterior elbow splint for support of elbow in 90 degree flexion position. Consists of upper arm and forearm shell connected by bar. Rigid vinyl coated aluminum, with or without foam padding. Fits right or left arm, available in range of sizes. Replacement foam pad linings available separately.

Hip Abduction Splint

Hip abduction splint. 2 models: the Pehr Abduction Splint has 2 shells that fit on inner part of thighs, adjustable cross bar, polyfoam cushion or Kodel lining pads and velcro strap closures. The Eftekhar Abduction Splint has 2 section shell and polyfoam cushion pads that completely encircle the legs, rigid crossbar and velcro straps. Replacement pads available separately.

Hand Splint

Hand splints. Vinyl coated aluminum, with or without foam padding. Variety of forearm and cock up wrist splints, and whole hand platform splints.

Post Op Shoe

Postoperative shoe for use after foot surgery. Has padded innersole and firm wooden sole with nonslip rubber outersole. Water resistant vinyl with adjustable lace closure. open toe with closed heel. Womens or mens sizes.

Richards Handy Exerciser (Model 29-0201)

Hand exerciser for resistive hand exercise. High density foam rubber. 3 1/4 inches long. 2 inches wide. 5/8 inch thick.

Vest Restraint

Vest restraint to restrain person in bed, chair, or wheelchair. Slip on front design makes it difficult for person to remove. Has shoulder and waist straps that are tied to bed or chair. Woven synthetic material. Shoulder straps are 1 inch wide and padded with 1/4 inch foam. Waist strap is 1 1/2 inches wide. Washable. Small for 26 to 36 inch chest and large for 36 to 46 inch chest.

Limb Restraint

Limb restraint for limiting motion or immobilizing limb. Consists of adjustable length webbing strap with heavy D ring, slide buckle and velcro closure. Webbing is padded with foam. Fits leg, arm or wrist.

Heel And Elbow Pad

Heel and elbow pad for protection of skin and prevention of decubitus ulcers. 80 pore foam laminated to 20 pore foam for free air circulation, of 1 inch thick fleecy Kodel or of convoluted polyurethane foam. Velcro closures, washable, rang of sizes.

Richards Cockup Wristlet

Cockup wristlet for wrist support. Canvas construction with flannel lining. contoured stays and laced tension straps with velcro closures. Available for right or left hand in 6 or 8 inch lengths. For palm width sizes; extra extra small 3 to 3 1/4 inches, extra small 3 1/4 to 3 1/2 inches, small 3 1/2 to 3 3/4 inches, medium 3 3/4 to 4 inches and large 4 to 4 1/4 inches.

Head Halter

Head halter for vertical traction. Diskard model is lightweight surgical gauze with cellulose webbing that loops onto spreader bar. Intended for disposable use. One universal size. The controlled stretch model is made of reticulated foam laminated to cotton knit material with heavy D ring at either end for attachment to spreader bar. Halter is split to cradle head from chin in front from back of head. Washable. Available with or without spreader bar in sizes small 9 by 6 inches, medium 10 by 7 i

Traction Head Halter

Traction head halter, foam padded duck material with deep cupped chinpiece and heavy D rings for attachment to spreader bar. Vertical traction model has adjustable length webbing straps on either side with cushion pieces at forehead level, that attach to D rings. The Repro Head Halter model has a large head piece that encircles back of head from temple to temple and attaches to chinpiece with adjustable webbing strap with buckles. Webbing straps on either side of head piece attach to D rings. De

Slip On Ankle Support

Ankle support, seamless elasticized knot material. Cut edges are stitched to prevent raveling. open heel slip on design. length 8 1/2 inches. Small and large size. fits left or right.

Wrist Forearm Splint

Wrist and forearm splint for support and immobilization. Contoured stays to hold wrist in dorsiflexion and 3 wide velcro closures along forearm and palmar piece that is secured by narrow velcro closure. Richards splint model made of felt and duck material. Vinyl splint model made of vinyl laminated to tricot lined foam. Dandy Lion model is made of felt and denim. Fits right or left hand, for palm width sizes: small 2 3/4 to 3 inches, medium 3 1/4 to 3 1/2 inches, large 3 1/2 to 4 inches, and ext

Universal Wrist And Forearm Splint.

Wrist and forearm splint for support and immobilization. Can be used after cast removal or in some cases in place of cast. Lightweight thick foam with vinyl outer covering and soft tricot lining, and aluminum stays to hold wrist in cockup position. Loop lock closures with velcro for quick adjustment and application. Washable. available in pediatric size and 10 1/2 inch adult size. Fits right or left hand.

Richards Universal Lumbosacral Support

Lumbosacral support. Soft foam laminated to pressure sensitive brushed nylon material with 3 contoured stays to provide support to lumbosacral area. Elastic tension strap at each side to allow adjustment without removing belt. Washable. Belt is 11 1/2 inches wide and available in womens style for hip sizes 25 to 44 inches, and mens style for hip sizes 28 to 50 inches.

Lumbosacral Support

Lumbosacral support. Elastic material with velcro closures. Richards support model is all elastic construction with 2 rigid contoured stays and elastic tension straps at sides. Richards belt model is elastic and felt contraction and has 4 contoured stays and 3 adjustable tension straps with buckles. Both models washable. Available in hip measurement sizes small 30 to 34 inches, medium 34 to 38 inches, large 38 to 42 inches, extra large 42 to 46 inches and extra extra large 46 to 50 inches.

Richards Wide All Elastic Belt

Abdominal belt for abdominal or low back support. Elastic with darts for proper fit and pressure sensitive closure. Flexible metal stays to resist sagging and rolling. Washable. Womens style contoured under bust. Available in 8 or 10 inch widths, in mens or womens styles, for waist measurements small 24 to 30 inches, medium 30 to 36 inches, large 36 to 42 inches, extra large 42 to 48 inches and extra extra large 48 to 54 inches.

Rib Belt

Rib belt for support of rib cage. Washable 6 inch wide elastic with velcro closure. Womens styles contoured under bust. Sized by rib cage measurement. Available in elastic rib binder model or all elastic model with flexible stays at prevent rollover or sagging and darts for improved fit. Both models available in mens or womens styles in rib cage sizes: small 24 to 30 inches, medium 30 to 36 inches, large 36 to 42 inches, extra large 42 to 48 inches and extra extra large 48 to 54 inches.

Universal Abdominal Binder

Abdominal binder for abdominal or low back support. Washable elastic with foam laminated to pressure sensitive material. Richards model is 11 inches wide and has flexible stays to prevent rolling. Dandy Lion model is 10 inches wide and available in contoured mens or womens style. Both models come in one size to fit waist measurement 24 to 50 inches.

Universal Rib Belt

Rib belt for support of rib cage. Made of washable elastic with foam laminated to pressure sensitive material. Womens styles are contoured under bust. Available in 7 inch wide model with flexible stays to prevent sagging and rollover or Dandy Lion model. Mens and Womens style fit rib cage size 24 to 50 inches.

Vertical Arm Sling

Vertical arm sling for support of forearm in vertical position while person lies supine. Attaches to IV pole or overbed frame with webbing strap and heavy D ring. sling is secured to arm with 2 velcro straps. The Richards model is made of duck fabric and comes in one universal size, 12 inches by 16 inches long. the Dandy Lion model has ice bag pockets, is made of cotton denim and can be converted to comfort style arm sling. Pediatric size 12 by 10 inches and universal adult size 17 by 10 inches.

Richards Arm Strap

Arm strap for arm and shoulder support. One piece design with 1 1/2 inch wide webbing looped at each end. Arm slips through loops and is supported distal to elbow and proximal to wrist. Length of strap and loops is adjustable with 2 slide buckles. Available in webbing style, with neck padding only, or with padding on loops and neck. Small 56 inches long, medium 62 inches long, large 72 inches long.

Richards Economy Immobilization And Velpeau Sling

Arm sling for support of arm after injury or surgery. Immobilizes arm close to body in Velpeau position. Deep pocket design, washable muslin fabric. One shoulder strap and one waist strap, adjustable length with metal slide buckles. small 7 by 13 inches, medium 8 by 16 inches, large 9 by 19 inches.

Rigid Cervical Collar

Cervical collar, rigid plastic with foam padded contact points and stainless steel hardware. Myocervical collar style available with buckle or velcro closure. Exostatic collar style has a chin piece and velcro closure. Both styles sized by neck measurement and available in range of widths and lengths.

Maddacomfort Sling (Model F78461)

The Maddacomfort Sling, model F78461, is an arm sling designed to provide comfort and support at the shoulder, hand, and arm areas. The sling is made of polyurethane foam bound in a fine open mesh knit cover and features an oval wrist pad and a square elbow pad. A 1-inch wide web strap with plated metal buckles provides solid support and proper positioning of the injured limb. The sling is washable.

Have-A-Tray Carrier (Models 70612-3200/3400/6100)

The Have-A-Tray Carriers are caddys for wheelchairs, walkers, and crutches. The two-compartment carriers allow ready access to personal itms. The caddies are made of molded polypropylene copolymer with a drain hole in each compartment. Hardware is supplied with each model for proper attachment. DIMENSIONS: Inside dimensions are 11.25 x 2 7/8 x 7.75 inches. WEIGHT: Wheelchair carrier (70612-6100) is 2 pounds, walker caddy (70612-3200) is 1.3 pounds, and the crutch caddy (70612-3400) is 1.3 pounds

Guardian Shower/commode Chair (Models 99200, 99204, & 99208)

Wheelchair commode. Fully padded back and seat with water repellant vinyl, removable rear wheels, folding back for portability, lightweight aluminum construction, commode pan, push handles, removable armrests, multiple position commode opening, swing away removable footrests, 5 inch rubber front casters. Available with 5 inch rear casters and jack brakes, 24 inch mag or steel spoke rear wheels, aluminum or plastic coated handrim.

Design A Roho Kit

Kit allows therapist to design Roho cushion fit for individual needs before ordering custom cushion. Each cushion section is 4 rows by 2 rows of air inflatable, pressure relieving cells with Velcro attached to bottom. Sections are attached to base to form desired cushion design.

Bath Pillow (Model 72739)

The Bath Pillow, model 72739, is made of plastic foam that is hygienic, oderless, non-absorbant, and cleanable. The pillow has three suction cups to hold it in a fixed position. DIMENSIONS: 12 x 8.5 x 1.25 inches. WEIGHT: 8 ounces.

Wheelchair Carry-All (Model 70616)

The Wheelchair Carry-All, model 70616, is a back pouch designed to attach to the handgrips of wheelchair push handles. This bag is made of waterproof denim with a rigid bottom liner and webbing straps. The caddy has a full-width pocket inside and a top flap that has a Velcro closure. DIMENSIONS: 14 x 14 x 4 inches.

Quick Change 3-In-1 Bed System (Models Bg00, Bg22, Bg33, & Bg672)

Hospital bed system. Consists of basic split spring, standard hi/low bed ends, motor, motor control unit and crank all purchased separately. Bed converts from manual hi/low to semi electric, to all electric. No tools needed. Can be done with patient in bed. Basic spring steel channel frame. 84 zinc coated helical springs. Bed ends 4 post construction with oak laminate panels. 3 inch ball bearing casters. 9 inch height adjustment: 13 1/2 inch low spring height, 22 1/2 inch high spring height. Hea

Rehab Red Dot Wide Frame Folding Walker (Model 7766)

Folding walker. Adult size. Features Safe T Lok mechanism, operated by depressing tab with finger, side of hand or palm. Grasp handles and pull outward to unfold, depress tab and legs fold inward. Weight 6.4 pounds. Height adjustable 32 inches to 36 inches. Base width 25 1/4 inches. Base depth open 19 1/2 inches, Folded 3 3/4 inches. Inside handgrip width 19 inches. Wide stance for wheelchair transfer, over toilet safety assist. Walker usable in small space with one leg folded for additional man

Wheelchair Trays And Modifications

Lapboards. Available in 1/2 inch 9 ply birch plywood, or 3/8 or 1/4 inch Tuffak (polycarbonate material), with regular or heavy duty cottonwood ribs. Range of widths, 20 7/8 to 25 3/4 inches; depths 17 7/ 8 to 25 3/4 inches; Cam adjustment range 13 3/4 - 18 1/4 inches to 18 1/ 4 - 23 1/4 inches. Small fits STC 803/900 Models and Tiny Tot and Growing wheelchairs; Medium fits STC 804/806/900 Models and Growing, Narrow Adult and Adult wheelchairs; Large fits STC 804/806/900 Models and Adult wheelch

Prone Board (Model 201)

Prone board. Angles adjust to eight positions from 0 to 90 degrees. Adjustable chest pad with strap, knee board with straps, footboard with blocks, figure 8 toe and ankle straps, adjustable back and hip strap and removable middle board. Safety position lock. Positive retracting stand. Adjustable birch plywood lapboard, 19 by 24 inches. Blue denim upholstery. Five inch casters. Base width 27 inches; base length 43 inches. 84 pounds. Safety position lock, adjustable brakes. Support pads adjust fro

Clinare Bath

Portable, freestanding water hydraulic bath lift. Tilts to an upright position for entry and reclines to a natural bathing position once user is seated in unit. Contoured and cutaway shape facilitates water circulation in the perineal area. Operated by single lever control.

Deluxe Blow-Molded Bath Seat (Models 1710, 1714, & 1716)

The Deluxe Blow-Molded Bath Seat, models 1710, 1714, 1716, is a shower chair designed to assist those who are unable to stand in the shower. The blow-molded, polyethylene seat has drainage holes in the back and seat and is easy to assemble. OPTIONS: adjustable legs (model 1714); back rest and adjustable legs (model 1716). DIMENSIONS: Seat is 19.75 x 11.5 inches; the height of the adjustable units is 14 to 21 inches.

Comfort Seat (Models 1702 & 1736)

The Comfort Seat, models 1702 and 1736, is a shower chair designed to assist those who are unable to stand in the shower. The seat is easy to assemble and made of molded plastic with built-in handles and slide-proof rubber suction tips. OPTIONS: seat with a matching back (1736); seat with adjustable legs and seat with matching back and adjustable legs (see separate entry). DIMENSIONS (WxD): Measured at leg tips, 19 x 14 inches; seat is 20 x 11.75 inches; height is 15 inches.

Child Commode Chair (Models 6380 & 6381)

The Child Commode Chair is designed for children with adjustable height legs, a swing-away safety bar, and a commode pail. OPTIONS: A padded headrest, adjustable footrests, seat reducer, and seat belt. DIMENSIONS: The seat is 14 x 14 inches; height adjusts from 13 to 17 inches.

Youth Safe T Walker, Super Rigid (Model 7721)

Aluminum extra braced extra strength childs walker. Has 4 rubber tips. Height adjusts 28 inches to 32 inches.

Safe T Fold Walker (Models 7749 & 7750)

Walker without wheels for youth. Folds easily for storage. Has no pinch folding braces. Contoured vinyl coated nonrotating hand grips. Child (model 7749) adjusts 24 to 28 inches, 4 pounds. Toddler (model 7750) adjusts 20 to 24 inches, weights 3 1/2 pounds. Accessories wheeled attachments for front legs with 3 inch wheels. Extensions for extra weight are available.

Contoured Handgrip Cushion (Model 816)

Contoured and angled handgrip of neoprene sponge with metal reinforced center. Completely replaces wooden crutch handgrip. Uses standard crutch hardware for attachment. Will fit all standard adult and medium size crutches. Width 4 1/16 inches.

Closed Handgrip Cushion (Type 16)

Rubber cushion for crutch handgrip. For crutches with removable handgrip. Wooden handgrip must be removed to slip rubber handgrip over it.

Open Type Handgrip Cushion (Model 14)

Neoprene cushion for crutch handgrip. Has longitudinal slit opening for application to crutches. With fixed handgrip.

Safe T Grip (Models 400, 500, & 550)

Natural rubber crutch tip with metal disc at base of shaft cavity. For 3/4 to 7/8 inch shafts. Super base diameter 2 inches; height 3 inches. Large base diameter 1 3/4 inches; height 2 1/2 inches. Medium base diameter 1 1/2 inches; height 1 3/4 inches.

Safe-T-Grip Crutch Or Cane Tip (Model 635)

Rubber cane tip with metal disc at base of shaft cavity. For 1/2 to 5/8 inch shafts base diameter 1 1/8 inch; height 1 3/4 inch. For 3/8 to 1/2 inch shafts base diameter 1 1/8 inch; height 1 3/4 inch. For 1/4 to 3/8 inch shafts base diameter 7/8 inch; height 1 1/4 inch.

Forearm Rest Attachment (Model 6035)

Neolite covered trough and vertical handgrips that adjust fore, aft, and rotate. For attachment to Invacare wheeled walkers.

Quickie P320

The Quickie P320 is an adult powered wheelchair which can be converted to a manual chair as needed using an optional conversion kit. FRAME: The frame is 24 inches wide with the standard base and 26 inches wide with the wide base and 33.5 inches long without the footrests. Anti-tip tubes are standard The frame is available in a choice of 11 standard colors and 6 optional colors. CONTROLS: A remote programmable joystick and controller with a choice of right or left mounting is standard. A heavy-

Canvas Arm Sling (Models 6602 & 6604)

The Canvas Arm Sling, models 6602 and 6604, is designed to support and immobilize the arm. The envelope-style sling has a closed elbow and extends to the wrist. It is made of canvas with a bound border and has a wrist extender and a single adjustable strap. OPTIONS: Sling with a body strap (6604). SIZE: One size fits all. COLOR: pearl grey.

Pouch Type Arm Sling (Model F78459)

The Pouch Type Arm Sling, model F78459, is designed to support and immobilize an injured limb. The sling extends from elbow to wrist, and is made of sewed denim with a 1-inch wide web strap. The strap is adjustable with plated metal buckles and has a polyurethane pad to provide maximum weight distribution of the limb. This sling is washable. DIMENSIONS: 15 inches long.

Hemoplegic Sling (Model 6606)

The Hemoplegic Sling, model 6606, is designed to support and immobilize the arm. The sling has two cradles, one supporting the wrist and hand and the other supporting the upper forearm/elbow region. The strap is adjustable. OPTIONS: a similar one-size fits all hemi-sling with thumb rests is available, model 6022. SIZES: small/medium and large/extra large.

Inflatable Bath Pillow (Model H72738)

The Inflatable Bath Pillow, model H72738, is a mouth-inflatable contoured pillow designed to provide head support in the tub. Two suction cups hold the pillow to the tub or any smooth surface. The pillow is made of heat-sealed vinyl construction with flush recessing filler tube. DIMENSIONS: 16 x 8 x 5 inches, inflated.

Stat-Temp Ii (Models 1150, 1151, 3010, & 3020)

The Stat-Temp II is a liquid crystal fever strip. This small, circular temperature monitor has a ThermalSense metal backing designed to enable it to continuously monitor temperature quickly and accurately. The disc's design permits uniform contact with the surface of the skin and can be placed almost anywhere on the body including the forehead, temple, behind the ears, over the heart, along limbs for objective determination of a regional block, or on skin flap surgery locations. The device conta

Bath-O-Matic Hydrocushion

The Bath-O-Matic Hydrocushion is a water inflatable cushion used as a bath lift that connects to the tub faucet or shower head, designed for those who have difficulty standing. The cushion is placed in the tub and filled with warm water. After transfering to the cushion, the valve on the cushion is opened and the cushion deflates, filling the bathtub with water. After bathing, water is drained from the tub and the cushion is refilled with water, returning person to elevated sitting position. The

Plak-Vak Suction Toothbrush

The Plak-Vak Suction Toothbrush is a toothbrush designed to evacuate bacteria, dental plaque, saliva, fluids, and food debris to greatly reduce bacterial infection, chronic halitosis, and the hazard of aspiration of critical care and convalescent patients. The unit can be used with a wall mounted suction unit or a portable suction pump.

Booklift Copyholder (Model 4065)

The Booklift Copyholder, Model 4065, is a portable, folding overhead bookholder designed for use by people with upper extremity disabilities. The device folds completely flat consists of a clear plexiglass bookrest on telescoping legs to allow the book to be placed at the most comfortable angle for the user. The holder has nine height adjustments and two adjustable clips. DIMENSIONS (WxHxD): 11.75 x 9.38 x 1.75 inches with a 1.5-inch lip when open.

Bariatric Shower Chair / Commode (Models Pvcm1305 & Pvcm1315)

The Bariatric Shower Chair/Commode is a shower commode designed for use by bariatric individuals with mobility disabilities. This combination shower chair and commode has a dual reinforced frame, four stainless steel bolts in the seat, and threaded-stem casters. A 10-quart commode slides out when not in use. Other features include anti-slip handgrips and a push/pull handle. Model PVCM1315 has a slide-out footrest. DIMENSIONS: Seat is 30 inches wide between armrests. CAPACITY: 700 pounds.

Res-Q-Vac Hand-Powered Portable Suction System (Models 2240, 2248, 2222, & 2213)

The Res-Q-Vac Hand-Powered Portable Suction System is a portable aspirator and oral hygiene aid designed for use by individuals with swallowing disabilities, respiratory disabilities, or stroke. This hand-powered portable suction system creates hospital-level suction without batteries or electricity, and can be used for oral suctioning or other situations where suction is needed. Two compressions of the handle create suction power of over 400 mmHg. Suction levels of over 550 mmHg can be achieved

Invacare Raised Toilet Seat (Model 685-4)

The Invacare Raised Toilet Seat, model 685-4, is an elevated toilet seat designed for use by individuals with arthritis or mobility or lower extremity disabilities. Made of molded composite plastic, this contoured seat elevates the existing seat height by 5 inches. The seat includes Microban antimicrobial protection. DIMENSIONS (HxLxW): 5 x 15.5 x 14.75 inches. WEIGHT: 3 pounds, 6 ounces. CAPACITY: 250 pounds. WARRANTY: 3 year limited warranty.

Quickie Rhythm M5 Power Chair

The Quickie Rhythm M5 is a power wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 37 x 25.32 inches. This chair has a turning radius of 20 inches. The cowl is available in blue, burgundy or black. The chair is available with optional power tilt, power lift, or power recline. CONTROLS: Delphi remote 4- or 5-button hand control. MWD: M3 mid wheel drive. SEAT (LxW): 14 to 22 x 14 to 24 inches (traditional rehab seat) or 12 to 22 x 17 to 20 in

Invacare Ivc 9000 Topaz Wheelchair

The Invacare IVC 9000 Topaz is a folding bariatric adult manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Triple chrome-plated, carbon steel frame. Options include an oxygen carrier, telescoping IV rod, and a crutch/cane carrier. SEAT (LxW): 18 or 20 x 20 to 30 inches in 2 inch increments. The floor-to-seat height is 15.5, 17.5, or 19.5 depending on wheel and caster package. UPHOLSTERY: Black or blue vinyl or nylon. The upholstery is flam

Children's Bed Rail And Sports Pouch

The Children's Bed Rail and Sports Pouch is a portable side rail designed for use by children with balance, mobility, or cognitive disabilities. Made of heavy-duty, poder-coated steel, the rail has a foam grip handle that folds for storage and transport. Reversible and adjustable for use on either side of the bed, this rail secures to the bed frame and mattress with the included safety strap. The included three-pocket organizer fits over the rail to prevent entrapment and provide storage. DIMENS

Silent Speaker Communication Aids (Models 110-B, 110-C, 110-E, 111-B, 111-D, & 111-E)

Silent Speaker Communication Aids are graphic communication boards designed to enhance communication between caregivers and individuals experiencing verbal communication disabilities due to trauma, surgery, injury, disease, or any other condition. Reusable laminated clipboards (models 110-B, 110-C, and 110-E) and cards (models 111-B, 111-D, and 111-E) feature concise keywords and phrases printed in large type with either a drawing of the human body (models 110-B, 110-C, 111-B, and 111-D), or lar

Inflatable Bath Pillow (Model 523-1582-0100)

The Inflatable Pillow, model 523-1582-0100, is a mouth-inflatable pillow designed for use by individuals with upper extremity or mobility disabilities. The pillow is designed to support the head and neck while in the bathtub. Four suction cups hold the pillow to the tub. The pillow is made of heavy-duty vinyl with a dual valve system. It is made for compact storing when not in use. SIZE: (HxW) 14.5 x 22 inches wide. COLOR: Light blue.

Mini Oxygen Tank Holder For Wheelchairs (Model F706201001)

The Mini Oxygen Tank Holder For Wheelchairs, model F706202001, is a wheelchair oxygen cylinder carrying case designed for use by individuals with mobility and respiratory disabilities. It attaches to the handles and frame of the wheelchair and positions the tank behind the wheelchair to avoid interference with the user’s head or back. The tank holder is made of heavy duty waterproof nylon and has two pockets that can be used to hold one or two cylinders or other small supplies such as tubing.

Ez Landing Fall Mat (Models 911585 & N911590)

The EZ Landing Fall Mat is a fall mat designed to protect individuals with balance or mobility disabilities. Intended to provide protection for individuals who are at risk of falling out of bed or while entering or exiting the bed, this one-piece mat features trip-resistant beveled edges; a low profile, stable surface; and nano-silver throughout which protects the mat from stains, odor-causing bacteria, mold, and mildew. DIMENSIONS (HxLxW): 1 x 68 x 30 inches or 1 x 68 x 24 inches.

Cool Mesh Back Support System

The Cool Mesh Back Support System is a lumbar support designed for use by individuals with lower extremity disabilities, back pain, or those who have difficulty sitting for long periods. Designed to help promote good posture and lumbar support, this ergonomic back support can be used at home, work, or in a car. The system is made of mesh fabric that allows cool air flow comfort and attaches to the seat with an elastic strap. The strap can be adjusted upward and downward.

 
Processing...


Driving Walking/Biking Public Transit  Get Directions